Cimstar 60 MSDS
Cimstar 60 MSDS
Cimstar 60 MSDS
http://www.cimcool.com
CIMSTAR® 60
METALWORKING FLUID CONCENTRATE
DATE EFFECTIVE: 01-24-2007
2 EMERGENCY INFORMATION .
Product is alkaline. Product is a primary eye irritant. Highway spills could result in slippery conditions.
No other significant health effects are associated with this material.
Eyes
In case of eye contact, flush immediately with running water for at least 15 minutes, and get prompt
medical attention.
Skin Contact
For skin contact flush with large amounts of water while removing contaminated clothing. Remove
contaminated shoes and clothing and launder before reuse. If irritation persists, get medical attention.
Diluted product is not irritating to the skin when used as recommended and good personal hygiene is
practiced.
Ingestion
If the material is swallowed, get immediate medical attention or advice. DO NOT INDUCE VOMITING.
Give two glasses of water or milk. Immediately contact a physician and obtain treatment. Swallowing
small quantities of diluted product may cause nausea, diarrhea or abdominal distress.
Inhalation
Inhalation can occur in applications where high mist levels are generated. OSHA has set a PEL of 15
mg/m³ for any airborne particulate as a nuisance level of exposure. NIOSH has set a REL of 0.5 mg/m³
for metalworking fluid mist. If symptoms are experienced, remove source of contamination or move
victim to fresh air. If symptoms persist, get medical attention.
5 CONTROL MEASURES .
Respiratory protection
Product is not volatile.
In applications where time-weighted exposures are 0.5 to 5 mg/m³, mist reduction through improved
ventilation, mist collection or process modification is recommended by NIOSH. Where this is not
possible, NIOSH recommends the use of any air purifying, half-mask respirator including a disposable
respirator, equipped with any P- or R-series particulate filter. If the average exposure will exceed 5
mg/m³, NIOSH recommends use of a powered, air-purifying respirator equipped with a hood or helmet
and a HEPA filter. If respiratory problems are present when mist levels are < 0.5 mg/m³, respiratory
protection should be based on the individual recommendation of a qualified health care provider.
Caution
The appropriate use and type of respirator is dependent upon use of the product and local operating
conditions.
Ventilation
For most applications, normal shop ventilation is adequate. However, when high mist levels are
generated or where machines are close together or ventilation is inadequate, operators may experience
respiratory irritation. For such applications, use of splash guards or mist collectors is recommended.
Eye protection
Proper metalworking plant eye protection required when handling product concentrate.
Extinguishing Media
Not Applicable
Hazardous Combustion Products
Smoke, fumes, oxides of nitrogen, hydrogen chloride, and oxides of carbon
Flash Point: Not Applicable
Lower Explosive Limit: Not Applicable
Upper Explosive Limit: Not Applicable
HMIS RATINGS
Health 1
Flammability Classification 0
Reactivity 0
NFPA RATINGS
Health 1
Flammability Classification 0
Reactivity 0
Contain the spill, collect on absorbent material, and discard as dictated by Federal, state and local
regulations that may apply. Flush area thoroughly with water.
Reportable Quantity: None
Avoid all contact of product with eyes or skin. Wash thoroughly after handling. Do not swallow. Do not
store product concentrate in direct sunlight or elevated temperatures. Use only as recommended by
Milacron Marketing Company, Global Industrial Fluids . If frozen, thaw completely at room temperature
prior to use.
Other Precautions
Contains amines. Do not add sodium nitrite or other nitrosating agents to this product because
suspected cancer-causing nitrosamines may be formed.
12 REACTIVITY .
Stability
Stable under normal conditions.
Conditions to avoid
Use as directed.
Materials to avoid
Avoid contact with strong acids or oxidizers to product.
13 TRANSPORTATION INFORMATION
.
BY LAND
Hazardous Materials Description and Proper Shipping Name (49 CFR 172.101)
Not a Hazardous Material
U.S. Harmonized Tariff Code: 3403.99.0000
BY AIR OR VESSEL
Hazardous Materials Description and Proper Shipping Name (49 CFR 172.101)
Not a Hazardous Material
14 REGULATORY INFORMATION
.
EXPOSURE GUIDELINES
REGULATED MATERIAL NIOSH REL OSHA PEL OSHA STEL ACGIH TLV ACGIH STEL
MONOETHANOLAMINE 3 ppm 6 ppm 3 ppm 6 ppm
METALWORKING FLUID MIST 0.5 mg/m³
MINERAL OIL (MIST) 5 mg/m³ 5 mg/m³ 5 mg/m³
CERCLA
No components of this product are present at levels which require reporting under 40 CFR 302.4.
EPCRA (SARA) TITLE III Extremely Hazardous Substances (302): None
GLOSSARY OF ABBREVIATIONS
ACGIH American Conference of Governmental Industrial Hygenists
CAS Chemical Abstracts Service
CERCLA Comprehensive Environmental Response Compensation and Liability Act
CFR Code of Federal Regulations
COC Cleveland Open Cup
DOT Department of Transportation
EPCRA Emergency Planning and Community Right-to-Know Act (aka SARA)
IARC International Agency for Research on Cancer
NIOSH National Institute for Occupational Safety and Health
NTP National Toxicology Program
OSHA Occupational Safety and Health Administration
PEL Permissible Exposure Limit
RCRA Resource Conservation and Recovery Act
REC Recommended
REL Recommended Exposure Limit
SARA Superfund Amendments and Reauthorization Act
STEL Short-Term Exposure Limit
TCLP Toxicity Characteristics Leaching Procedure
TLV Threshold Limit Value
TSCA Toxic Substances Control Act
VOC Volatile Organic Compounds
Disclaimer
NOTE: The opinions expressed herein are those of qualified experts within Milacron Marketing
Company, Global Industrial Fluids and of their suppliers. We believe that the information contained
herein is current as of the date of this Material Safety Data Sheet. Since the use of this information and
of these opinions and the condition and use of the product are not within the control of Milacron
Marketing Company, Global Industrial Fluids , it is the user's obligation to determine the conditions of
safe use of the product.