REPUBLIC OF THE

DPWH
PHILIPPINES

OFFICE OF THE
BUILDING OFFICIAL

DISTRICT/ CITY/ MUNICIPALITY

ARCHITECTURAL
GENERAL NOTES
1.0 ALL CONSTRUCTION & FABRICATION SHALL COMPLY
WITH THE CURRENT BUILDING CODES, ORDINANCES,
STATUES AND ALL OTHER APPLICABLE CODES WHICH
GOVERN THE SITE FOR WHICH THESE DRAWINGS PERTAIN.

2.0 ALL DIMENSIONS ARE MEASURED TO GRID LINE, FACE

OF MASONRY OR FACE FINISH WALL UNLESS OTHERWISE
NOTED. ALL WRITTEN DIMENSIONS SHALL HAVE
PRECEDENCE OVER SCALING OF THE DRAWINGS.
DRAWINGS SHOULD NOT BE SCALED, IF MORE
DIMENSIONS ARE REQUIRED, NOTIFY THE AUTHOR AT
ONCE. ALL DIMENSIONS SHALL BE NOTIFIED OF ANY
ERRORS OR DIMENSIONS REQUIRING CORRECTION
BEFORE PROCEEDING WITH WORKS.

3.0 CONTRACTOR SHALL INVESTIGATE, VERIFY AND BE

RESPONSIBLE FOR ALL CONDITIONS & DIMENSIONS ON
THE FIXTURES AND SHALL NOTIFY THE AUTHOR IN A FORM
OF REQUEST FOR INFORMATION "RFI" ABOUT ANY
CONDITION ARISING FROM THIS INVESTIGATION THAT
REQUIRES MODIFICATION OR CHANGE BEFORE
PROCEEDING WITH WORKS.

4.0 THE GENERAL CONTRACTOR SHALL BE RESPONSIBLE

FOR PROVIDING ALL NECESSARY BLOCKING, BACKING,
FRAMING, HANGERS, OR ANY OTHER SUPPORTS FOR ALL
FIXTURE EQUIPMENT AND ALL ITEMS WHICH REQUIRE THE
SAME.

5.0 CUT OUT PATTERNS / OR TEMPLATES SHALL BE

P E R S P E C T I V E PROVIDED BY THE SPECIALTY SUBCONTRACTOR OR
SUPPLIER TO THE MILLWORK/JOINTERY CONTRACTOR
AND /OR GENERAL CONTRACTOR FOR ALL ITEMS WHICH
SCALE: NTS REQUIRE COORDINATION OF EQUIPMENT INTO BUILT-IN
FIXTURES.

6.0 COORDINATE WITH THE ARCHITECT THROUGH THE

CONSTRUCTION MANAGER FOR ANY DISCREPANCIES
FOUND IN ALL DRAWINGS AND SPECIFICATIONS BEFORE
EXECUTION OF WORK.

7.0 COORDINATE WITH OTHER TRADES TO AVOID

CONFLICT PRIOR FOR FINAL IMPLEMENTATION OF WORK.

8.0 OTHER MATERIALS NOT MENTIONED IN ALL

CONSTRUCTION DOCUMENTS (DRAWINGS AND
SPECIFICATIONS) BUT ARE NECESSARY FOR THE PROPER
COMPLETION OF THE WORK MUST BE FURNISHED AND
EXECUTED BY THE CONTRACTOR ENTAILING NO
ADDITIONAL COST INVOLVED IN PART OF THE OWNER.

9.0 VERIFY ACTUAL CONDITIONS AND DIMENSIONS IN THE

FIELD OF WORK AND FIT DETAIL ACCORDINGLY. SUBMIT
SHOP DRAWINGS FOR ARCHITECTS FINAL APPROVAL
PRIOR FOR FINAL EXECUTION/AND IMPLEMENTATION OF
THE WORK.

NOTE :WRITTEN DIMENSIONS ON THESE DRAWINGS SHALL

HAVE PRECEDENCE OVER SCALED DIMENSIONS.
CONTRACTORS SHALL VERIFY AND BE RESPONSIBLE FOR
ALL DIMENSIONS AND CONDITIONS ON THE JOB. THE
DESIGNER MUST BE NOTIFIED IMMEDIATELY OF ANY
VARIATIONS FROM THE DIMENSIONS AND CONDITIONS
SHOWN BY THESE DRAWINGS.
NOTE :ANY DISCREPANCY ON ALL DRAWINGS &
SPECIFICATIONS (ARCHITECTURAL, STRUCTURAL,
SANITARY, ELECTRICAL,MECHANICAL ETC.) SHALL BE
SUBJECT FOR VERIFICATION

VICINTY MAP SITE DEVELOPMENT PLAN

SCALE: NTS SCALE: NTS

CERTIFIED BY: PROJECT TITLE: APPROVED BY: RA 9266 ART. 04 SEC. 33 SHEET CONTENT: DESIGNED BY: W.R.P. REVISIONS: SHEET NO.
ALL DESIGNS DRAWINGS SPECIFICATIONS &
COPIES THEREOF ARE PREPARED AND DRAWN BY: C.M.M
W.R. PALOMA FURNISHED BY THE ARCHITECT. THEY ARE

PROPOSED ATON LAND MAIN GATE

THE INSTRUMENTS OF PROFESSIONAL

ARCHITECT SERVICE, AS INSTRUMENTS OF

PROFESSIONAL SERVICE, THEY ARE THE CHECKED BY: STAMP CS 1
MANAGEMENT CONSULTANCY SERVICES
MR. REYNALDO P. BANTUG PROPERTY OF THE ARCHITECT WHETHER
THE WORK FOR WHICH THEY ARE MADE
EXECUTED OR NOT & NOT TO BE
AS SHOWN ABOVE

LOCATION: SILAY CITY, NEGROS OCCIDENTAL OWNER

REPRODUCED OR USED ON OTHER WORK
EXCEPT BY WRITEN AGREEMENT WIH THE
ARCHITECT.
DATE: 06/03/22
1
REMARKS:
 2.50 9.20 2.50 9.20 2.50

4.60 4.60 4.60 4.60

EXIT GATE ENTRANCE GATE

BLDG.1 BLDG.2

GUARD HOUSE
SIDEWALK

SIDEWALK
ENTRANCE & EXIT FLOOR PLAN
SCALE: 1:80MTS.

GUARD HOUSE
BLDG.1 EXIT GATE ENTRANCE GATE BLDG.2

ENTRANCE & EXIT ELEVATION

SCALE: 1:80MTS.

4.60 4.60

0.30 4.00 0.30 0.30 0.30

0.30
2 X 6" T U B U L A R 2 X 6" T U B U L A R

2 X 6 " T U B U L A R 2 X 6" T U B U L A R

2 X 6" T U B U L A R
2 X 6" T U B U L A R
2 X 6" T U B U L A R

2X6" TUBULAR

2 X 6" T U B U L A R

2 X 6" T U B U L A R

2 X 6" T U B U L A R

2 X 6" T U B U L A R

1.90

2.50
29-1"X1" SQUARE BAR 29-1"X1" SQUARE BAR

2 X 6" T U B U L A R 2 X 6" T U B U L A R

0.30
2 X 6" T U B U L A R 2 X 6" T U B U L A R

0.20
NAT. GROUND LN.

ENTRANCE & EXIT GATE DETAIL

SCALE: 1:70MTS.

CERTIFIED BY: PROJECT TITLE: APPROVED BY: RA 9266 ART. 04 SEC. 33 SHEET CONTENT: DESIGNED BY: W.R.P. REVISIONS: SHEET NO.
ALL DESIGNS DRAWINGS SPECIFICATIONS &
COPIES THEREOF ARE PREPARED AND DRAWN BY: C.M.M
W.R. PALOMA FURNISHED BY THE ARCHITECT. THEY ARE

PROPOSED ATON LAND MAIN GATE

THE INSTRUMENTS OF PROFESSIONAL
ARCHITECT SERVICE, AS INSTRUMENTS OF
PROFESSIONAL SERVICE, THEY ARE THE CHECKED BY: STAMP A 1
MANAGEMENT CONSULTANCY SERVICES
MR. REYNALDO P. BANTUG PROPERTY OF THE ARCHITECT WHETHER
THE WORK FOR WHICH THEY ARE MADE AS SHOWN ABOVE
4
EXECUTED OR NOT & NOT TO BE
REPRODUCED OR USED ON OTHER WORK DATE: 06/03/22
EXCEPT BY WRITEN AGREEMENT WIH THE
ARCHITECT.
LOCATION: OWNER REMARKS:
 A B A B
4.80

0.60 2.60 0.60

1
1

0.60

0.60
60cm x 60cm
A B B GRANITE TILES

2.60

W
2
1
60cm x 60cm
PR GRANITE TILES

5.38

3.90
1.40

3.90

5.38
1.40

AREA = 3.64 SQ.M.

D
1 2
3.90

3.90
B
2.50

AREA = 6.50 SQ.M. 2.50

GUARD HOUSE FLOOR TILE LAY-OUT

0.60
0.60
SCALE: 1:60MTS.

2
0.65

0.65

0.60 2.60 0.60

2 A B
W 4.80
1
TOTAL AREA= GUARD HOUSE ROOF PLAN
10.14 SQ.M. PLANT BOX SCALE: 1:60MTS.
1
2.65

1.80 CH= 2.70

0.80 0.60 9MM GYPSUM BOARD ON A
0.57 0.57 0.57 60cm DISTANCE METAL
FURRING
SIGNAGE

0.30

0.60
1.20
0.60
2.10

2.10

2.10
3.40
0.30

CH= 2.70

1.50
9MM GYPSUM BOARD ON A
60cm DISTANCE METAL
0.90

GUARD HOUSE FLOOR PLAN FURRING

SCALE: 1:60MTS.

D W W
1 1 2 2
DESCRIPTION: PVC DOOR DESCRIPTION: AWNING GLASS DESCRIPTION: FIXED GLASS
WINDOW WITH WINDOW WITH
QUANTITY: 1-UNIT
ALUMINUM FRAME ALUMINUM FRAME
QUANTITY: 1-UNIT QUANTITY: 1-UNIT

SCHEDULE OF DOORS & WINDOWS GUARD HOUSE REFLECTED CEILING PLAN

SCALE: 1:60MTS. SCALE: 1:60MTS.

CERTIFIED BY: PROJECT TITLE: APPROVED BY: RA 9266 ART. 04 SEC. 33 SHEET CONTENT: DESIGNED BY: W.R.P. REVISIONS: SHEET NO.
ALL DESIGNS DRAWINGS SPECIFICATIONS &
COPIES THEREOF ARE PREPARED AND DRAWN BY: C.M.M
W.R. PALOMA FURNISHED BY THE ARCHITECT. THEY ARE
THE INSTRUMENTS OF PROFESSIONAL

ARCHITECT PROPOSED ATON LAND MAIN GATE SERVICE, AS INSTRUMENTS OF

PROFESSIONAL SERVICE, THEY ARE THE CHECKED BY: STAMP A 2
MANAGEMENT CONSULTANCY SERVICES
MR. REYNALDO P. BANTUG PROPERTY OF THE ARCHITECT WHETHER
THE WORK FOR WHICH THEY ARE MADE
EXECUTED OR NOT & NOT TO BE
AS SHOWN ABOVE
REPRODUCED OR USED ON OTHER WORK
EXCEPT BY WRITEN AGREEMENT WIH THE
ARCHITECT.
DATE: 06/03/22
4
LOCATION: OWNER REMARKS:
 APEX LINE OF ROOF APEX LINE OF ROOF APEX LINE OF ROOF

1.44

1.44

1.44
SPANISH STYLE ROOF

TOP OF ROOF BEAM TOP OF ROOF BEAM TOP OF ROOF BEAM

LOGO/SINAGE

5.40

5.40

5.40
3.20

3.20

3.20
DECORATIVE BRICKS

LOGO/SINAGE

FINISH FLR. LINE FINISH FLR. LINE FINISH FLR. LINE

0.40

0.40

0.40
NATURAL GRND. LINE NATURAL GRND. LINE NATURAL GRND. LINE

GUARD HOUSE FRONT ELEVATION GUARD HOUSE RIGHT SIDE ELEVATION GUARD HOUSE LEFT SIDE ELEVATION
SCALE: 1:70MTS. SCALE: 1:70MTS. SCALE: 1:70MTS.

APEX LINE OF ROOF APEX LINE OF ROOF APEX LINE OF ROOF

1.44
1.44

1.44
SEE RAFTER DETAIL SEE RAFTER DETAIL

TOP OF ROOF BEAM TOP OF ROOF BEAM TOP OF ROOF BEAM

0.50
0.50
CEILING HEIGHT CEILING HEIGHT

5.40
5.40

5.40

3.20
3.20

3.20
FINISH FLR. LINE FINISH FLR. LINE FINISH FLR. LINE

0.40
0.40

0.40
NATURAL GRND. LINE NATURAL GRND. LINE NATURAL GRND. LINE
COMPACTED FILL COMPACTED FILL

GUARD HOUSE REAR ELEVATION GUARD HOUSE SECTION THRU "A" GUARD HOUSE SECTION THRU "B"
SCALE: 1:70MTS. SCALE: 1:70MTS. SCALE: 1:70MTS.

CERTIFIED BY: PROJECT TITLE: APPROVED BY: RA 9266 ART. 04 SEC. 33 SHEET CONTENT: DESIGNED BY: W.R.P. REVISIONS: SHEET NO.
ALL DESIGNS DRAWINGS SPECIFICATIONS &
COPIES THEREOF ARE PREPARED AND DRAWN BY: C.M.M
W.R. PALOMA FURNISHED BY THE ARCHITECT. THEY ARE
THE INSTRUMENTS OF PROFESSIONAL
ARCHITECT PROPOSED ATON LAND MAIN GATE SERVICE, AS INSTRUMENTS OF
PROFESSIONAL SERVICE, THEY ARE THE CHECKED BY: STAMP A 3
MANAGEMENT CONSULTANCY SERVICES
MR. REYNALDO P. BANTUG PROPERTY OF THE ARCHITECT WHETHER
THE WORK FOR WHICH THEY ARE MADE
EXECUTED OR NOT & NOT TO BE
AS SHOWN ABOVE
REPRODUCED OR USED ON OTHER WORK
EXCEPT BY WRITEN AGREEMENT WIH THE
ARCHITECT.
DATE: 06/03/22
4
LOCATION: OWNER REMARKS:
 A B
3.70

0.60 2.50 0.60

A B

0.60
0.60
1 1.70
0.30 1.10 0.30
D
1
1

0.30
2 X6 TUBUL AR

3.70

2.50
2 X6 TUBUL AR

2.50

3.70

2 X6 TUBUL AR

2 X6 TUBUL AR

2 X6 TUBUL AR

2 X6 TUBUL AR

1.90

2.50
6-1"X1"
2.50

1.70

SQUARE
BAR

AREA = 6.25 SQ.M.

2 2 X6 TUBUL AR

0.60
0.60

0.30
SIDEWALK FIN. FLR LN. 2 X6 TUBUL AR

2 D
0.60 2.50 0.60 1
2.50
3.70 DESCRIPTION: TUBULAR GATE
QUANTITY: 1-UNIT

BLDG. 1 & 2 FLOOR PLAN BLDG. 1 & 2 ROOF PLAN SCHEDULE OF DOORS
SCALE: 1:60MTS. SCALE: 1:60MTS. SCALE: 1:70MTS.

APEX LINE OF ROOF

APEX LINE OF ROOF

1.40

1.40
SPANISH STYLE ROOF SPANISH STYLE ROOF

TOP OF ROOF BEAM

TOP OF ROOF BEAM
0.30

0.30
4.60

4.60
3.00

0.40

3.00
DECORATIVE BRICKS DECORATIVE BRICKS
1.60

1.40
FINISH FLR. LINE
FINISH FLR. LINE
0.20

NATURAL GRND. LINE

0.20
NATURAL GRND. LINE

BLDG. 1 & 2 FRONT ELEVATION BLDG. 1 & 2 LEFT SIDE ELEVATION

SCALE: 1:70MTS. SCALE: 1:70MTS.

CERTIFIED BY: PROJECT TITLE: APPROVED BY: RA 9266 ART. 04 SEC. 33 SHEET CONTENT: DESIGNED BY: W.R.P. REVISIONS: SHEET NO.
ALL DESIGNS DRAWINGS SPECIFICATIONS &
COPIES THEREOF ARE PREPARED AND DRAWN BY: C.M.M
W.R. PALOMA FURNISHED BY THE ARCHITECT. THEY ARE
THE INSTRUMENTS OF PROFESSIONAL

ARCHITECT
PROPOSED ATON LAND MAIN GATE
SERVICE, AS INSTRUMENTS OF
PROFESSIONAL SERVICE, THEY ARE THE CHECKED BY: STAMP A 4
MANAGEMENT CONSULTANCY SERVICES
MR. REYNALDO P. BANTUG PROPERTY OF THE ARCHITECT WHETHER
THE WORK FOR WHICH THEY ARE MADE AS SHOWN ABOVE
4
EXECUTED OR NOT & NOT TO BE
REPRODUCED OR USED ON OTHER WORK DATE: 06/03/22
EXCEPT BY WRITEN AGREEMENT WIH THE
ARCHITECT.
LOCATION: OWNER REMARKS: