Report 1 1
Report 1 1
Report 1 1
CHEMISTRY LABORATORY
REPORT
EXPERIMENT 1: CHEMICAL REACTIONS
Nguyễn Lê
5 Hoàng Vy IELSIU21181 100%
I. Introduction:
Experiment 1 is aimed to test and observe the chemical changes of the reactants to form
chemical reactions among different solutions. Seven experiments will be conducted in this
experiment 1. The first is a process involving copper (Cu 2+), iron (Fe2+ and Fe3+), and aluminum
(Al3+). The reactions of silver halides, H2O2, and KMnO4 are the following. The flame test is the
final experiment.
II. Experimental:
1. Reactions of Cu2+:
a. Mix 10 drops of 0.5M CuSO4 with 10 drops of 2M NaOH → Observe
→ Add 10 drops of 2M NaOH → Observe.
b. Mix 10 drops of 0.5M CuSO4 with 10 drops of 2M NH4OH → Observe
→ Add 10 drops of 2M NH4OH → Observe.
2. Reactions of silver halides:
a. KCl: Mix and wait for 2 minutes: 10 drops of 0.5M KCl with 10 drops of 0.1M
AgNO3 → Observe.
Mix and wait for 2 minutes: 10 drops of 0.5M KCl with 10 drops of 0.1M
AgNO3 and 10 drops of 2M NH4OH → Observe.
b. KBr: Mix and wait for 2 minutes: 10 drops of 0.5M KBr with 10 drops of 0.1M
AgNO3 → Observe.
Mix and wait for 2 minutes: 10 drops of 0.5M KBr with 10 drops of 0.1M
AgNO3 and 10 drops of 2M NH4OH → Observe.
3. Reactions of H2O2:
a. Mix and wait for 2 minutes: 1 drop of 0.1M KMnO4 with 5 drops of 2M H2SO4
and 5 drops of 3% H2O2 → Observe.
b. Mix and wait for 2 minutes: 5 drops of 0.1M KI with 5 drops of 2M H2SO4
and 5 drops of 3% H2O2 → Observe.
c. Mix and wait for 2 minutes: 10 drops of 3% H2O2 with a pinch of MnO2
→ Observe.
International University, Vietnam National University - HCMC 3
CHEMISTRY LABORATORY
4. Reactions of KMnO4:
a. Mix 10 drops of 0.5M Na2SO3 with 5 drops of 2M H2SO4 and 5 drops of
0.1M KMnO4 → Observe.
b. Mix 10 drops of 0.5M Na2SO3 with 5 drops of 6M NaOH and 5 drops of 0.1M
KMnO4 → Observe.
c. Mix 10 drops of 0.5M Na2SO3 with 5 drops of distilled water and 5 drops of
0.1M KMnO4 → Observe.
5. Reactions of Fe2+ and Fe3+:
a. Reactions of Fe3+:
i. Mix 10 drops of 0.5M FeCl3 with 5 drops of 2M KOH → Observe.
ii. Mix 10 drops of 0.5M FeCl3 with 5 drops of 2M NH4OH → Observe.
b. Reactions of Fe2+:
i. Mix 10 drops of 0.5M FeSO4 with 5 drops of 2M KOH → Observe.
ii. Mix 10 drops of 0.5M FeSO4 with 5 drops of 2M NH4OH → Observe.
6. Reactions of Al3+:
a. Mix 10 drops of 0.5M Al2(SO4)3 with 5 drops of 2M NaOH
→ Observe → Add 20 drops of 2M HCl → Observe.
b. Mix 10 drops of 0.5M Al2(SO4)3 with 5 drops of 2M NaOH
→ Observe → Add 20 drops of 2M NaOH → Observe.
7. Flame test:
a. Light the Bunsen burner.
b. Clean the loop with distilled water.
c. Dip the loop into the tested solution.
d. Hold it in flame.
e. Record the dominant flame color.
f. Clean the loop for the next solution.
g. Repeat the same process for other tested solutions.
• Tested solution: LiCl, NaCl, KCl CaCl2, BaCl2.
International University, Vietnam National University - HCMC 4
CHEMISTRY LABORATORY
0.5M CuSO4 At first, the pale blue CuSO4 (aq) + 2NH4OH (aq)
+ 2M NH4OH precipitate of Cu(OH)2. → Cu(OH)2 (s) + (NH4)2SO4 (aq)
Then, on passing the Cu(OH)2(s) + (NH4)2SO4 (aq) + 2NH4OH (aq)
excess NH4OH, the pale → [Cu(NH3)4]SO4 (aq) + 4H2O (aq)
blue color precipitate will
turn into a deep blue
solution. This is due to the
formation of a soluble
complex tetra amine copper
[II] sulfate ([Cu(NH3)4]SO4)
Figure 1.1: Reaction 1.1 Figure 1.2: Reaction 1.1 Figure 1.3: Reaction 1.2 Figure 1.4: Reaction 1.2
0.5M KBr Light yellow precipitate KBr (aq) + AgNO3 (aq) → AgBr (s) + KNO3 (aq)
+ 0.1M AgNO3 appears.
0.5M KBr First, the reaction of
+ 0.1M AgNO3 KBr and AgNO3 forms KBr (aq) + AgNO3 (aq) → AgBr (s) + KNO3 (aq)
+ 2M NH4OH light yellow precipitate.
Then the precipitate will
International University, Vietnam National University - HCMC 6
CHEMISTRY LABORATORY
Comments: Ion Ag+ can combine with halogens to form a precipitate with different colors.
Moreover, these precipitates are dissolved in NH4OH and form complex salts.
In the last picture on the right, we did not put enough NH4OH into the solution, so it is still
a little yellow in the solution.
Figure 2.1: Reaction 2.1 Figure 2.2: Reaction 2.1 Figure 2.3: Reaction 2.2 Figure 2.4: Reaction 2.2
3. Reactions of H2O2:
Table 3: Reactions of H2O2
Reaction Observation Chemical Equation
0.1M KMnO4 The purple of KMnO4 2KMnO4 (aq) + 3H2SO4 (aq) + 5H2O2 (aq)
+ 2M H2SO4 faded into a clear liquid and → K2SO4 (aq) + 2MnSO4 (aq) + 8H2O (aq) +
+ H2O2 released gas. 5O2 (g)
The orange liquid turned 2KI (aq) + H2SO4 (aq) + H2O2 (aq)
0.1M KI → K2SO4 (aq) + I2 (s) + 2H2O (aq)
into yellowish-brown liquid
+ 2M H2SO4 and after 2 minutes dark
+ H2O2 purple precipitate
appeared.
International University, Vietnam National University - HCMC 7
CHEMISTRY LABORATORY
Figure 3.1: Reaction 3.1 Figure 3.2: Reaction 3.2 Figure 3.3: Reaction 3.3
4. Reactions of KMnO4:
Table 4: Reactions of KMnO4
Reaction Observation Chemical Equation
The purple color of 5Na2SO3 (aq) + 3H2SO4 (aq) + 2KMnO4 (aq)
0.5M Na2SO3
potassium permanganate → K2SO4 (aq) + 2MnSO4 (aq)+ 5Na2SO4 (aq)
+ 2M H2SO4
was changed into a clear + 3H2O (aq)
+ 0.1M KMnO4
liquid (transparent).
0.5M Na2SO3 liquid and brown → 3Na2SO4 (aq) + 2MnO2 (s) + 2KOH (aq)
+ H2O precipitation.
+ 0.1M KMnO4
Comments: KMnO4 can react with a salt such as Na2SO3 in many different conditions
like acid (H2SO4), base (NaOH), or even distilled water (H2O). Mangan (Mn) is an oxidized
substance as it reduces oxidation number from +7 to +2 or +4.
In the second reaction, the dark green was so dark that we consider it black. In the last
reaction, there should be some dark red precipitation of MnO 2 that appeared after the
solution turned transparent, but we put so little KMnO 4 and too much distilled water, so it
was quite difficult to see.
Figure 4.1: Reaction 4.1 Figure 4.2: Reaction 4.2 Figure 4.3: Reaction 4.3
International University, Vietnam National University - HCMC 9
CHEMISTRY LABORATORY
5. A. Reactions of Fe3+:
Table 5: Reactions of Fe3+
Reaction Observation Chemical Equation
0.5M FeCl3 FeCl3 (aq) + 3KOH (aq)
Forming brown-red
+ 2M KOH → Fe(OH)3 (s) + 3KCl (aq)
precipitation.
Comments: FeCl3 reacts with base compounds in order to create ion Fe3+, forming
brown precipitation Fe(OH)3.
5. B. Reactions of Fe2+:
Table 6: Reactions of Fe2+
Reaction Observation Chemical Equation
0.5M FeSO4 Dark green precipitate FeSO4 (aq) + 2KOH (aq)
+ 2M KOH appears. → Fe(OH)2 (s) + K2SO4 (aq)
A yellow aqueous
0.5M FeSO4 solution of FeSO4 turn to FeSO4 (aq) + 2NH3 (aq) + 2H2O (aq)
+ 2M NH4OH dark green and appears → Fe(OH)2 (s) + (NH4)2SO4 (aq)
dark
International University, Vietnam National University - HCMC 10
CHEMISTRY LABORATORY
green precipitate.
Comments: FeSO4 reacts with base compounds in order to create ion Fe2+, forming
moss-green precipitation Fe(OH)2.
6. Reactions of Al3+:
Table 7: Reactions of Al3+
Reaction Observation Chemical Equation
0.5M Al2(SO4)3 Form an opaque, white Al2(SO4)3 (aq) + 6NaOH (aq)
+ 2M NaOH precipitate Al(OH)3 → 2Al(OH)3 (s) + 3Na2SO4 (aq)
0.5M Al2(SO4)3 The precipitate Al(OH)3 Al2(SO4)3 (aq) + 6NaOH (aq)
+ 2M NaOH slowly disappears and → 2Al(OH)3 (s) + 3Na2SO4 (aq)
+ 2M HCl results in a clear liquid 2Al(OH)3 (s) + 6HCl (aq)
product → 2AlCl3 (aq) + 6H2O (aq)
International University, Vietnam National University - HCMC 11
CHEMISTRY LABORATORY
Comments: The result of the reaction between aluminum sulfate Al2(SO4)3 and sodium
hydroxide is the white-colored precipitate aluminum hydroxide Al(OH)3 and sodium
sulfate Na2SO4. If using the products in the previous reaction as reactants and adding
hydrochloric acid HCl, the precipitate aluminum hydroxide Al(OH)3 dissolves and
aluminum chloride is the new product. Following the same procedure, but replacing
hydrochloric acid HCl with sodium hydroxide NaOH, the precipitate aluminum hydroxide
Al(OH)3 continuously accumulates and ultimately dissolves.
7. Flame test:
Dominant Wavelength Frequency Photon
Solution
flame color (nm) (s−1) energy
(J)
LiCl red-orange 622 4.823x1014 3.196x10-19
NaCl orange 609 4.926x1014 3.264x10-19
KCl violet 423 7.092x1014 4.699x10-19
CaCl2 red-orange 622 4.823x1014 3.196x10-19
BaCl2 orange-yellow 597 5.025x1014 3.330x10-19
IV. Conclusions:
After this experiment, we had the opportunity to do many types of reactions such as synthesis,
decomposition, single displacement, double displacement, combustion, acid-base, complex
compound formation, and oxidation-reduction. Following the preceding trials, we can distinguish
between several sorts of events such as color change, precipitation formation, and gas
formation. In addition, we saw the physical characteristics of various chemicals alter through a
flame test.