Contact SAMSUNG WORLDWIDE

If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care centre.
Country Customer Care Centre Web Site
EIRE 0818 717 100 www.samsung.com
U.K 0330 SAMSUNG (7267864) www.samsung.com

LED TV
User Manual

E-MANUAL

imagine the possibilities

Thank you for purchasing this Samsung product.
To receive more complete service, please register
your product at
www.samsung.com/register
Model______________ Serial No.______________

© 2011 Samsung Electronics Co., Ltd. All rights reserved.

BN68-03432J-03
BN68-03432J

[UD5000-XU]BN68-03432J.indb 1 2011-05-17 �� 5:18:52

 For more information on how to use e-Manual (P. 13)
Figures and illustrations in this User Manual are provided for reference only and may differ from actual product appearance.
Product design and specifications may be changed without notice.

Important Warranty Information Regarding Television Format Viewing

1. Functionalities related to Digital TV (DVB) are only available in countries/areas where DVB-T (MPEG2 and MPEG4 AVC) digital terrestrial
signals are broadcasted or where you are able to access to a compatible DVB-C (MPEG2 and MPEG4 AAC) cable-TV service. Please check
with your local dealer the possibility to receive DVB-T or DVB-C signal.
2. DVB-T is the DVB European consortium standard for the broadcast transmission of digital terrestrial television and DVB-C is that for the broadcast
transmission of digital TV over cable. However, some differentiated features like EPG (Electric Programme Guide), VOD (Video On Demand) and so
on, are not included in this specification. So, they cannot be workable at this moment.
3. Although this TV set meets the latest DVB-T and DVB-C standards, as of [August, 2008], the compatibility with future DVB-T digital terrestrial
and DVB-C digital cable broadcasts cannot be guaranteed.
4. Depending on the countries/areas where this TV set is used some cable-TV providers may charge an additional fee for such a service and
you may be required to agree to terms and conditions of their business.
5. Some Digital TV functions might be unavailable in some countries or regions and DVB-C might not work correctly with some cable service
providers.
6. For more information, please contact your local Samsung customer care centre.
✎✎ The reception quality of TV may be affected due to differences in broadcasting method between the countries. Please check the TV
performance in the local SAMSUNG Authorized Dealer, or the Samsung Call Centre whether it can be improved by reconfiguring TV
setting or not.

Still image warning

Avoid displaying still images (like jpeg picture files) or still image element (like TV programme logo, panorama or 4:3 image format, stock or news
bar at screen bottom etc.) on the screen. Constant displaying of still picture can cause ghosting of LED screen, which will affect image quality. To
reduce risk of this effect, please follow below recommendations:
• Avoid displaying the same TV channel for long periods.
• Always try do display any image on full screen, use TV set picture format menu for best possible match.
• Reduce brightness and contrast values to minimum required to achieve desired picture quality, exceeded values may speed up the burnout
process.
• Frequently use all TV features designed to reduce image retention and screen burnout, refer to proper user manual section for details.

Securing the Installation Space

Keep the required distances between the product and other objects (e.g. walls) to ensure proper ventilation.
Failing to do so may result in fire or a problem with the product due to an increase in the internal temperature of the product.
✎✎ When using a stand or wall-mount, use parts provided by Samsung Electronics only.
• If you use parts provided by another manufacturer, it may result in a problem with the product or an injury due to the product falling.
✎✎ The appearance may differ depending on the product.
✎✎ Be careful when you contact the TV because some parts can be somewhat hot.
Installation with a stand. Installation with a wall-mount.

10 cm 10 cm

10 cm 10 cm 10 cm 10 cm

10 cm

Correct Disposal of This Product (Waste Electrical & Electronic Equipment)

(Applicable in the European Union and other European countries with separate collection systems)
This marking on the product, accessories or literature indicates that the product and its electronic accessories (e.g. charger, headset,
USB cable) should not be disposed of with other household waste at the end of their working life. To prevent possible harm to
the environment or human health from uncontrolled waste disposal, please separate these items from other types of waste and
recycle them responsibly to promote the sustainable reuse of material resources. Household users should contact either the retailer
where they purchased this product, or their local government office, for details of where and how they can take these items for
environmentally safe recycling. Business users should contact their supplier and check the terms and conditions of the purchase
contract. This product and its electronic accessories should not be mixed with other commercial wastes for disposal.

Correct disposal of batteries in this product

(Applicable in the European Union and other European countries with separate battery return systems)
This marking on the battery, manual or packaging indicates that the batteries in this product should not be disposed of with other
household waste at the end of their working life. Where marked, the chemical symbols Hg, Cd or Pb indicate that the battery contains
mercury, cadmium or lead above the reference levels in EC Directive 2006/66. If batteries are not properly disposed of, these
substances can cause harm to human health or the environment. To protect natural resources and to promote material reuse, please
separate batteries from other types of waste and recycle them through your local, free battery return system.

English - 2

[UD5000-XU]BN68-03432J.indb 2 2011-05-17 �� 5:18:53

 Accessories
✎✎Please make sure the following items are included with your TV. If any items are missing, contact your dealer.
✎✎The items’ colours and shapes may vary depending on the models.
✎✎Cables not included in the package contents can be purchased separately.
✎✎Check that there is no accessory hidden behind packing materials when you open the box.
yy Remote Control & Batteries (AAA x 2) yy Power Cord
yy Owner’s Instructions yy Cleaning Cloth

yy Holder Ring (4EA) yy Holder-Wire Stand yy CI Card Adapter

yy Component / AV Adapter yy Scart Adapter

✎✎An administration fee may be charged if either

(a) an engineer is called out at your request and there is no defect in the product
(i.e. where you have failed to read this user manual)
(b) you bring the unit to a repair centre and there is no defect in the product
(i.e. where you have failed to read this user manual).
✎✎The amount of such administration charge will be advised to you before any work or home visit is carried out.
Assembling the Holder-Wire stand

English - 3

[UD5000-XU]BN68-03432J.indb 3 2011-05-17 �� 5:18:54

 Viewing the Control Panel
✎✎The product colour and shape may vary depending on the model.

Control Panel

Speakers

Remote control sensor Aim the remote control towards this spot on the TV.
Power Indicator Blinks and turns off when the power is on and lights up in standby mode.
SOURCEE Toggles between all the available input sources. In the on-screen menu, use this
button as you would use the ENTERE button on the remote control.
MENU Displays an on-screen menu, the OSD (on screen display) of your TV’s features.
Y Adjusts the volume. In the OSD, use the Y buttons as you would use the ◄
and ► buttons on the remote control.
z Changes the channels. In the OSD, use the z buttons as you would use the
▼ and ▲ buttons on the remote control.
P (Power) Turns the TV on or off.

Standby mode
Do not leave your TV in standby mode for long periods of time (when you are away on a holiday, for example). A small amount
of electric power is still consumed even when the power button is turned off. It is best to unplug the power cord.

English - 4

[UD5000-XU]BN68-03432J.indb 4 2011-05-17 �� 5:18:55

 Viewing the Remote Control
✎✎This is a special remote control for the visually impaired persons and has Braille points on the Power, Channel, and
Volume buttons.

Displays and selects the available video

Turns the TV on and off. sources.
HDMI Selects the HDMI mode directly.

Press to directly access to channels.

Alternately select Teletext ON, Double, Returns to the previous channel.

Mix or OFF. (Not MHEG text)
Cuts off the sound temporarily.
Adjusts the volume.
Changes channels.
Displays the main on-screen menu.

Displays the My Downloads, Watch TV Displays channel lists on the screen.

and Source. CONTENT Displays the EPG (Electronic Programme
Guide).
Quickly select frequently used functions.
Displays information on the TV screen.
Selects the on-screen menu items and
Use as the selection button.
changes the values seen on the menu.
Exits the menu.
Returns to the previous menu.
A B C D
Buttons used in the Channel List,
Channel Manager, My Downloads,
P.MODE SRS DUAL I-II
Network, AllShare™ menu, interactive
TV(MHEG) features etc. E-MANUAL AD/SUBT. P.MODE: Selects picture mode.
SRS: Selects the TruSurround HD mode.
DUAL I-II: Select Dual sound mode.
E-MANUAL: Displays the e-Manual
Use these buttons in a specific feature. guide.
For details, refer to the e-Manual. P.SIZE: Selects the picture size.
AD: Audio Description selection. (Not
available in some locations)
SUBT.: Displays digital subtitles.

Installing batteries (Battery size: AAA)

Remove the battery cover located Insert two AAA/R6 or equivalent type Replace the battery cover.
on the back of the handset by gently batteries inside. Place the batteries in the
pulling downwards from the indicated right directions.
part.
✎✎Remove the batteries from remote control handset when it is not to be used for a long period. Otherwise it can be
damaged due to any leakage of batteries.

English - 5

[UD5000-XU]BN68-03432J.indb 5 2011-05-17 �� 5:18:56

 Connecting to an Antenna
When the TV is initially powered on, basic settings proceed automatically.
✎✎Preset: Connecting the mains and antenna.
VHF/UHF Antenna Cable TV Rear Panel

or

Plug & Play (Initial Setup)

When the TV is initially powered on, a sequence of on-screen prompts will assist in configuring basic settings. Press the
POWERP button. Plug & Play is available only when the Input source is set to TV.
✎✎To return to the previous step, press the Red button.
1 Selecting a language Press the ▲ or ▼ button, then press the ENTERE button. POWER

P
Select the desired OSD (On Screen Display) language.

2 Selecting Store Demo or

Home Use
Press the ◄ or ► button, then press the ENTERE button.
Select the Home Use mode. Store Demo mode is for retail environments.
To return the unit’s settings from Store Demo to Home Use (standard):
Press the volume button on the TV. When the OSD volume is displayed,
press and hold MENU for 5 sec.
Store Demo is only for shop display. If you select it, several functions are not
able to use. Please select Home Use when you watch at home.

3 Selecting a country Press the ▲ or ▼ button, then press the ENTERE button.
Select the appropriate country.
✎✎After selecting the country in the Country menu, some models may proceed with an
additional option to setup the pin number.
✎✎When you input the PIN number, 0-0-0-0 is not available.
✎✎The option may differ depending on country.
4 Setting the Clock Mode Set the Clock Mode automatically or manually.
Auto: Select the time zone (depending on the country) where you are located.
Manual: Allows you to manually set the current date and time.

5 Selecting an antenna Press the ▲ or ▼ button, then press the ENTERE button.
Select the desired broadcasting signal.

6 Selecting a channel Press the ▲ or ▼ button, then press the ENTERE button.
Select the channel source to memorise. When setting the antenna source to Cable, a step
appears allowing you to assign numerical values (channel frequencies) to the channels. For more
information, refer to Channel → Auto Tuning.
Press the ENTERE button at any time to interrupt the memorisation process.

7 Enjoy your TV. Select the Watch TV. Press the ENTERE button.
✎✎If you select the Network Settings, set the network. For more information, refer to
“Network menu” in the e-Manual.
If You Want to Reset This Feature...
Select System - Plug & Play (Initial Setup). Enter your 4 digit PIN number. The default PIN number is “0-0-0-0”. If you want to
change the PIN number, use the Change PIN function.
You should do Plug & Play (MENU → System) again at home although you did in shop.
✎✎If you forget the PIN code, press the remote control buttons in the following sequence in Standby mode, which resets
the PIN to “0-0-0-0”: MUTE → 8 → 2 → 4 → POWER (on).

English - 6

[UD5000-XU]BN68-03432J.indb 6 2011-05-17 �� 5:18:58

 Connecting to an AV devices

¦¦ Available devices: DVD, Blu-ray player, HD cable box, HD STB (Set-Top-Box) satellite
receiver, VCR, Digital Audio System, Amplifier, DVD Home Theatre, PC

HDMI, HDMI/DVI connection

HDMI OUT

DVI OUT

AUDIO OUT

R-AUDIO-L

Using an HDMI cable or HDMI to DVI Cable (up to 1080p)

✎✎HDMI IN 1(DVI), 2, 3, 4, PC/DVI AUDIO IN
xx For better picture and audio quality, connect to a digital device using an HDMI cable.
xx An HDMI cable supports digital video and audio signals, and does not require an audio cable.
–– To connect the TV to a digital device that does not support HDMI output, use an HDMI/DVI and audio cables.
xx The picture may not display normally (if at all) or the audio may not work if an external device that uses an older
version of HDMI mode is connected to the TV. If such a problem occurs, ask the manufacturer of the external
device about the HDMI version and, if out of date, request an upgrade.
xx Be sure to use an HDMI cable with a thickness of 14 mm or less.
xx Be sure to purchase a certified HDMI cable. Otherwise, the picture may not display or a connection error may
occur.
xx A basic high-speed HDMI cable or one with ethernet is recommended. This product does not support the
ethernet function via HDMI.

English - 7

[UD5000-XU]BN68-03432J.indb 7 2011-05-17 �� 5:18:58

 Component connection

COMPONENT OUT

G
B

B
PR PB Y

R
AUDIO OUT
R

R
W

W
R-AUDIO-L

AV connection

VIDEO OUT
Y

AUDIO OUT
R

R
W

R-AUDIO-L

SCART connection

EXT

Using a Component (up to 1080p) or Audio/Video (480i only) and Scart Cable
✎✎In Ext. mode, DTV Out supports MPEG SD Video and Audio only.
✎✎To obtain the best picture quality, the Component connection is recommended over the A/V connection.

English - 8

[UD5000-XU]BN68-03432J.indb 8 2011-05-17 �� 5:18:59

 Connecting to a PC and Audio device

¦¦ Available devices: Digital Audio System, Amplifier, DVD Home Theatre

Audio connection

OPTICAL

Headphones connection

Using an Optical (Digital) Cable or Headphone Connection

✎✎DIGITAL AUDIO OUT (OPTICAL)
xx When a digital audio system is connected to the DIGITAL AUDIO OUT (OPTICAL) jack, decrease the volume of
both the TV and the system.
xx 5.1 CH (channel) audio is available when the TV is connected to an external device supporting 5.1 CH.
xx When the receiver (home theatre) is set to on, you can hear sound output from the TV’s optical jack. When the TV
is receiving a DTV signal, the TV will send 5.1 CH sound to the home theatre receiver. When the source is a digital
component such as a DVD / Blu-ray player / cable box / STB (Set-Top-Box) satellite receiver and is connected to
the TV via HDMI, only 2 CH audio will be heard from the home theatre receiver. If you want to hear 5.1 CH audio,
connect the digital audio out jack from your DVD / Blu-ray player / cable box / STB satellite receiver directly to an
amplifier or home theatre.
✎✎Headphones H: You can connect your headphones to the headphones output on your set. While the headphones
are connected, the sound from the built-in speakers will be disabled.
xx Sound function may be restricted when connecting headphones to the TV.
xx Headphone volume and TV volume are adjusted separately.

English - 9

[UD5000-XU]BN68-03432J.indb 9 2011-05-17 �� 5:19:00

 ¦¦ Using an HDMI cable or HDMI to DVI Cable / a D-sub Cable

✎✎Connecting through the HDMI cable may not be supported depending on the PC.
✎✎An HDMI cable supports digital video and audio signals, and does not require an audio cable.

PC connection

HDMI OUT

DVI OUT

AUDIO OUT

AUDIO OUT

PC OUT

Display Modes (D-Sub and HDMI/DVI Input)

Optimal resolution is 1920 X 1080 @ 60 Hz.
Horizontal Frequency
Mode Resolution Vertical Frequency (Hz) Pixel Clock Frequency (MHz) Sync Polarity (H / V)
(KHz)
640 x 350 31.469 70.086 25.175 +/-
IBM
720 x 400 31.469 70.087 28.322 -/+
640 x 480 35.000 66.667 30.240 -/-
MAC 832 x 624 49.726 74.551 57.284 -/-
1152 x 870 68.681 75.062 100.000 -/-
640 x 480 31.469 59.940 25.175 -/-
640 x 480 37.861 72.809 31.500 -/-
640 x 480 37.500 75.000 31.500 -/-
800 x 600 37.879 60.317 40.000 +/+
800 x 600 48.077 72.188 50.000 +/+
800 x 600 46.875 75.000 49.500 +/+
1024 x 768 48.363 60.004 65.000 -/-
1024 x 768 56.476 70.069 75.000 -/-
1024 x 768 60.023 75.029 78.750 +/+
VESA DMT 1152 x 864 67.500 75.000 108.000 +/+
1280 x 1024 63.981 60.020 108.000 +/+
1280 x 1024 79.976 75.025 135.000 +/+
1280 x 800 49.702 59.810 83.500 -/+
1280 x 800 62.795 74.934 106.500 -/+
1280 x 960 60.000 60.000 108.000 +/+
1360 x 768 47.712 60.015 85.500 +/+
1440 x 900 55.935 59.887 106.500 -/+
1440 x 900 70.635 74.984 136.750 -/+
1680 x 1050 65.290 59.954 146.250 -/+
VESA DMT / DTV
1920 x 1080p 67.500 60.000 148.500 +/+
CEA
✎✎NOTE
xx For HDMI/DVI cable connection, you must use the HDMI IN 1(DVI) jack.
xx The interlace mode is not supported.
xx The set might operate abnormally if a non-standard video format is selected.
xx Separate and Composite modes are supported. SOG(Sync On Green) is not supported.

English - 10

[UD5000-XU]BN68-03432J.indb 10 2011-05-17 �� 5:19:02

 Changing the Input Source
¦¦ Source List
Use to select TV or other external input sources such as DVD / Blu-ray players / cable box / STB satellite receiver
connected to the TV.
■■ TV / Ext. / PC / AV / Component / HDMI1/DVI / HDMI2 / HDMI3 / HDMI4 / USB / AllShare
✎✎ In the Source List, connected inputs will be highlighted.
✎✎ If you want to see connected devices only, move to Connected using ◄ or ► button.
✎✎ Ext. and PC always stay activated.
✎✎ If the connected external devices are not highlighted, press the red button. The TV will search for connected
devices.
How to use Edit Name
In the Source, press the TOOLS button, and then you can set an external input sources name you want.
■■ VCR / DVD / Cable STB / Satellite STB / PVR STB / AV Receiver / Game / Camcorder / PC / DVI PC / DVI Devices / TV / IPTV / Blu-ray /
HD DVD / DMA: Name the device connected to the input jacks to make your input source selection easier.
✎✎ When connecting a PC to the HDMI IN 1(DVI) port with HDMI cable, you should set the TV to PC mode under Edit Name.
✎✎ When connecting a PC to the HDMI IN 1(DVI) port with HDMI to DVI cable, you should set the TV to DVI PC mode under Edit Name.
✎✎ When connecting an AV devices to the HDMI IN 1(DVI) port with HDMI to DVI cable, you should set the TV to DVI Devices mode under
Edit Name.
Information
You can see detailed information about the selected external device.

✎✎For best cable connection to this product, be sure to use cables with a maximum thickness as below:
xx Maximum thickness - 0.55 inches (14mm)

Connecting to a COMMON INTERFACE slot

Attaching the CI Card Adaptor
Attach the adapter as shown in the right.
To connect the CI CARD Adapter, follow these steps.
✎✎Make sure that you attach the adaptor before you mount the TV on a wall.
1. Insert the CI CARD Adapter into the two holes on the product 1.
✎✎ Please find the two holes on the rear of the TV. The two holes are beside the COMMON
INTERFACE port.
✎✎ Press it firmly at center of adapter to ensure it is fully lock.
2. Connect the CI CARD Adapter into the COMMON INTERFACE port.
3. Insert the “CI or CI+ CARD”.
Using the “CI or CI+ CARD”

To watch paid channels, the “CI or CI+ CARD” must be inserted.

yy If you do not insert the “CI or CI+ CARD,” some channels will display the message “Scrambled
Signal”.
yy The pairing information containing a telephone number, the “CI or CI+ CARD” ID the Host ID and other
information will be displayed in about 2~3 minutes. If an error message is displayed, please contact
your service provider.
yy When the configuration of channel information has finished, the message “Updating Completed” is
displayed, indicating the channel list is updated.
✎✎NOTE
xx You must obtain a “CI or CI+ CARD” from a local cable service provider.
xx When removing the “CI or CI+ CARD”, carefully pull it out with your hands since dropping the “CI or CI+ CARD” may cause damage
to it.
xx Insert the “CI or CI+ CARD” in the direction marked on the card.
xx The location of the COMMON INTERFACE slot may be different depending on the model.
xx “CI or CI+ CARD” is not supported in some countries and regions; check with your authorized dealer.
xx If you have any problems, please contact a service provider.
xx Insert the “CI or CI+ CARD” that supports the current antenna settings. The screen will be distorted or will not be seen.

English - 11

[UD5000-XU]BN68-03432J.indb 11 2011-05-17 �� 5:19:04

 Network Connection
Network Connection - Wireless
You can connect your TV to your LAN through a standard wireless router or modem. To connect wirelessly, you must first
attach a “Samsung Wireless LAN Adapter” (WIS09ABGN, WIS09ABGN2, WIS10ABGN - sold separately) to either the USB 1
(HDD) or USB 2 port on the back of your TV. See the illustration below.

TV Side Panel
Wireless IP sharer
The LAN Port on the Wall (wireless router having
DHCP server)
Samsung Wireless
LAN Adapter

LAN Cable

Samsung’s Wireless LAN adapter is sold separately and is offered by select retailers and Ecommerce sites. Samsung’s
Wireless LAN adapter supports the IEEE 802.11a/b/g and n communication protocols. Samsung recommends using IEEE
802.11n. When you play video over a network connection, the video may not be played smoothly.
Most wireless network systems incorporate a security system that requires devices that access the network through an access
point or wireless router (typically a wireless IP Sharer) to transmit an encrypted security code called an access key.
If Pure High-throughput (Greenfield) 802.11n mode is selected and the Encryption type is set to WEP, TKIP or TKIP AES
(WPS2Mixed) for your wireless router, Samsung TVs will not support a connection in compliance with new Wi-Fi certification
specifications.

Network Connection - Wired

There are two main ways to connect your TV to your network using cable, depending on your network setup. They are
illustrated below:

The Modem Port on the Wall External Modem TV Rear Panel

(ADSL / VDSL / Cable TV)

Modem Cable LAN Cable

The LAN Port on the Wall

TV Rear Panel

LAN Cable

✎✎A network speed of lower than 10 Mbps is not supported.

English - 12

[UD5000-XU]BN68-03432J.indb 12 2011-05-17 �� 5:19:06

 How to view the e-Manual
E-MANUAL You can find instructions about your TV’s features in the e-Manual in your TV. To
use, press the E-MANUAL button on your remote. Move the cursor using the up/
down/right/left buttons to highlight a category, then a topic, and then press the
ENTERE button. The e-Manual displays the page you want to see.
You can also access it through the menu:
OO MENUm → Support → e-Manual → ENTERE
✎✎To return to the e-Manual main menu, press the E-MANUAL button on the remote.
✎✎You cannot use Try Now directly if the TV is set to an external input source.

Screen Display

1 1 Currently displayed video, TV Programme, etc.

2 The category list. Press ◄ or ► button to select
2 category you want.
Basic Features 3 Displays the sub-menu list. Use the arrow
Picture Menu 3 buttons on your remote to move the cursor. Press
ENTERE button to select the sub-menu you
Sound Menu
want.
4 } Blue (Index): Displays the index screen.
5 E Enter: Selects a category or sub-menu.
6 e Exit: Exit the e-Manual.
} Index E Enter e Exit

4 5 6

How to toggle between an e-Manual topic and the corresponding OSD menu(s).

Basic Features > Picture Menu (3/17)

a Try Now
Picture

Picture Mode : Standard ►

Backlight :7
Contrast : 95
Brightness : 45
Sharpness : 50

E-MANUAL Colour
Tint (G/R)
: 50
: G50/R50
a Try Now b Home { Zoom } Index L Page e Exit Screen Adjustment

✎✎This function is not enabled in some menus.

Method 1 Method 2

1. If you want to use the menu that corresponds to an 1. Press the ENTERE button when a topic is displayed.
e-Manual topic, press the red button to select Try Now. “Are you sure?” appears. Select Yes, and then press the
2. To return to the e-Manual screen, press the E-MANUAL ENTERE button. The OSD window appears.
button. 2. To return to the e-Manual screen, press the E-MANUAL
button.

English - 13

[UD5000-XU]BN68-03432J.indb 13 2011-05-17 �� 5:19:09

 Viewing the Contents

Basic Features > Picture Menu (3/17) 1 Contents Area: Contains the topic contents, if you
selected a sub-menu. To move previous or next
page, press the ◄ / ► button.
2 Try Now: Displays the OSD menu that corresponds
1
to the topic. To return to the e-Manual screen,
press the E-MANUAL button.
3 Home: Moves to the e-Manual home screen.
4 Zoom: Magnifies a screen. You can scroll through
the magnified screen by using ▲ / ▼ buttons.
a Try Now b Home { Zoom } Index L Page e Exit 5 L (Page): Moves to previous or next page.
2 3 4 5

Using the Zoom mode

Select the Zoom, and then press ENTERE to magnify

the screen. You can scroll through the magnified screen
by using the ▲ or ▼ buttons.
✎✎To return to the screen to normal size, press the
RETURN button.

U Move R Return

How to search for a topic on the index page

✎✎This function may not be supported depending on the language.

1. If you want to search a keyword, press the blue button to select Index.
2. Press the ◄ or ► button to select a character order you want.
3. Press the ▲ or ▼ button to select a keyword you want to see, and then press the ENTERE button.
4. You can view the corresponding e-Manual instruction screen.
✎✎To close the Index screen, press the RETURN button.

English - 14

[UD5000-XU]BN68-03432J.indb 14 2011-05-17 �� 5:19:12

 Installing the Wall Mount
The wall mount kit (sold separately) allows you to mount the TV on the wall.
For detailed information on installing the wall mount, see the instructions provided with the wall mount. Contact a technician for
assistance when installing the wall mount bracket.
Samsung Electronics is not responsible for any damage to the product or injury to yourself or others if you elect to install the
TV on your own.
Wall Mount Kit Specifications (VESA)

Case A. Installing the SAMSUNG Wall-Mount Case B. Installing another company’s Wall-Mount

1 1 1
1

✎✎Wall mount kit is not supplied but sold separately.

Install your wall mount on a solid wall perpendicular to the floor. When attaching to other building materials, please contact
your nearest dealer. If installed on a ceiling or slanted wall, it may fall and result in severe personal injury.
✎✎NOTE
xx Standard dimensions for wall mount kits are shown in the table below.
xx When purchasing our wall mount kit, a detailed installation manual and all parts necessary for assembly are provided.
xx Do not use screws that do not comply with the VESA standard screw specifications.
xx Do not use screws longer than the standard dimension, as they may cause damage to the inside of the TV set.
xx For wall mounts that do not comply with the VESA standard screw specifications, the length of the screws may differ
depending on their specifications.
xx Do not fasten the screws too strongly, this may damage the product or cause the product to fall, leading to personal
injury. Samsung is not liable for these kinds of accidents.
xx Samsung is not liable for product damage or personal injury when a non-VESA or non-specified wall mount is used or
the consumer fails to follow the product installation instructions.
xx Do not exceed 15 degrees tilt when mounting this TV.
Product Standard
inches VESA Spec. (A * B) Quantity
Family Screw

19~22 75 X 75
M4
27 200 X 100
LED-TV 32~40 200 X 200 4
46~60 400 X 400 M8
65~75 600 X 400

Do not install your Wall Mount Kit while your TV is turned on. It may result in personal injury due to electric
shock.

English - 15

[UD5000-XU]BN68-03432J.indb 15 2011-05-17 �� 5:19:14

 Troubleshooting
If the TV seems to have a problem, first try this list of possible problems and solutions. If none of these troubleshooting tips
apply, visit “www.samsung.com”, then click on Support, or call Samsung customer service centre.
Issues Solutions and Explanations
The TV will not turn on. • Make sure the AC power cord is securely plugged in to the wall outlet and the TV.
• Make sure the wall outlet is working.
• Try pressing the POWER button on the TV to make sure the problem is not the remote. If
the TV turns on, refer to “Remote control does not work” below.
There is no picture/video. • Check cable connections (remove and reconnect all cables connected to the TV and
external devices).
• Set your external device’s (Cable/Set top Box, DVD, Blu-ray etc) video outputs to match
the connections to the TV input. For example, if an external device’s output is HDMI, it
should be connected to an HDMI input on the TV.
• Make sure your connected devices are powered on.
• Be sure to select the TV’s correct source by pressing the SOURCE button on the remote
control.
• Reboot the connected device by reconnecting the device’s power cable.
The remote control does not work. • Replace the remote control batteries with the poles (+/–) in the right direction.
• Clean the sensor’s transmission window on the remote.
• Try pointing the remote directly at the TV from 5~6 feet away.
The cable/set top box remote control • Program the Cable/Set top box remote control to operate the TV. Refer to the Cable/Set
doesn’t turn the TV on or off, or user manual for the SAMSUNG TV code.
adjust the volume.
✎✎You can keep your TV as optimum condition to upgrade the latest firmware on web site (samsung.com -> Support ->
Downloads) by USB.
✎✎This TFT LED panel uses a panel consisting of sub pixels which require sophisticated technology to produce. However,
there may be a few bright or dark pixels on the screen. These pixels will have no impact on the performance of the
product.

Licence

List of Features
Excellent Digital Interface & Networking: With a built-in HD digital tuner, nonsubscription HD broadcasts can be viewed without
a cable box / STB (Set-Top-Box) satellite receiver.

My Downloads
Allows you to play music files, pictures, and movies saved on a USB device.

AllShare™
AllShare™ connects your TV and compatible Samsung mobile phones/devices through a network.

Anynet+(HDMI-CEC)
Allows you to control all connected Samsung devices that support Anynet+ with your Samsung TV’s remote.

English - 16

[UD5000-XU]BN68-03432J.indb 16 2011-05-17 �� 5:19:15

 Securing the TV to the Wall
Caution: Pulling, pushing, or climbing onto the TV may cause the TV to fall. In particular, ensure that your
children do not hang over or destabilize the TV; doing so may cause the TV to tip over, resulting in serious
injuries or death. Follow all safety precautions provided on the included Safety Flyer. For added stability, install
the anti-fall device for safety purposes, as follows.

To avoid the TV from falling

1. Put the screws into the clamps and firmly fasten them onto the
wall. Confirm that the screws have been firmly installed onto the
wall.
✎✎ You may need additional material such as an anchor
depending on the type of wall.
✎✎ Since the necessary clamps, screws, and string are not
supplied, please purchase these additionally.
2. Remove the screws from the centre back of the TV, put the
screws into the clamps, and then fasten the screws onto the TV
again.
✎✎ Screws may not be supplied with the product. In this case,
please purchase the screws of the following specifications.
✎✎ Screw Specifications
xx For a 32 ~ 75 inch LED TV: M8
3. Connect the clamps fixed onto the TV and the clamps fixed onto
the wall with a strong string and then tie the string tightly. Wall
✎✎ NOTE
xx Install the TV near to the wall so that it does not fall backwards.
xx It is safe to connect the string so that the clamps fixed on the wall are equal to or lower than the clamps fixed on
the TV.
xx Untie the string before moving the TV.
4. Verify all connections are properly secured. Periodically check connections for any sign of fatigue for failure. If you have any
doubt about the security of your connections, contact a professional installer.

Storage and Maintenance

✎✎If you remove the attached sticker on the TV screen, clean the residues and then watch TV.

Do not spray water or a cleaning agent directly onto the Clean the product with a soft cloth dapped in a small amount
product. Any liquid that goes into the product may cause a of water.
failure, fire, or electric shock.

English - 17

[UD5000-XU]BN68-03432J.indb 17 2011-05-17 �� 5:19:16

 Specifications

Display Resolution 1920 x 1080

Environmental Considerations
Operating Temperature 10°C to 40°C (50°F to 104°F)
Operating Humidity 10% to 80%, non-condensing
Storage Temperature -20°C to 45°C (-4°F to 113°F)
Storage Humidity 5% to 95%, non-condensing
TV System Analogue: B/G, D/K, L, I (Depending on your country selection)
Digital: DVB-T/DVB-C
Colour/Video System Analogue: PAL, SECAM, NTSC-4.43, NTSC-3.58, PAL60
Digital: MPEG-2 MP@ML, MPEG-4, H.264/AVC MP@L3, MP@L4.0, HP@L4.0
Sound System BG, DK, L, NICAM, MPEG1, DD, DD+, HEAAC
HDMI IN Video: 1080 24p, 1080p, 1080i, 720p, 576p, 480p
Audio: 2Ch Linear PCM 32/44.1/48kHz, 16/20/24bits.
Stand Swivel (Left / Right) -20˚ ~ 20˚
Model Name UE32D5000 UE37D5000
Screen Size 32 inches 37 inches
Sound
(Output) 10 W X 2
Dimensions (WxDxH)
Body 762.0 X 29.9 X 462.0 (mm) 883.9 X 29.9 X 531.1 (mm)
With stand 762.0 X 242.2 X 530.4 (mm) 883.9 X 255.0 X 598.5 (mm)
Weight
Without Stand 7.1 kg 9.3 kg
With Stand 10.2 kg 12.5 kg
Model Name UE40D5000 UE46D5000
Screen Size 40 inches 46 inches
Sound
(Output) 10 W X 2
Dimensions (WxDxH)
Body 949.3 X 29.9 X 567.5 (mm) 1094.2 X 29.9 X 652.5 (mm)
With stand 949.3 X 255.0 X 635.2 (mm) 1094.2 X 275.0 X 711.1 (mm)
Weight
Without Stand 10.9 kg 13.7 kg
With Stand 14.2 kg 17.2 kg
✎✎Design and specifications are subject to change without prior notice.
✎✎For information about power supply, and more about power consumption, refer to the label attached to the product.

English - 18

[UD5000-XU]BN68-03432J.indb 18 2011-05-17 �� 5:19:17

 Warning! Important Safety Instructions

Please read the appropriate section that corresponds to the marking on your Samsung product before attempting to install the
product.

CAUTION This symbol indicates that high voltage is

present inside. It is dangerous to make any
RISK OF ELECTRIC SHOCK DO NOT OPEN kind of contact with any internal part of this
product.
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO
NOT REMOVE COVER (OR BACK). THERE ARE NO USER This symbol alerts you that important litera-
SERVICEABLE PARTS INSIDE. REFER ALL SERVICING TO ture concerning operation and maintenance
QUALIFIED PERSONNEL. has been included with this product.

• The slots and openings in the cabinet and in the back or bottom are provided for necessary ventilation.
To ensure reliable operation of this apparatus, and to protect it from overheating, these slots and openings must never be blocked or
covered.
- Do not cover the slots and openings with a cloth or other materials.
- Do not block the slots and openings by placing this apparatus on a bed, sofa, rug or other similar surface.
- Do not place this apparatus in a confined space, such as a bookcase, or built-in cabinet, unless proper ventilation is provided.
- Give your product 10 cm (4 inch) clearance from the wall.
• Do not place this apparatus near or over a radiator or heat resistor, or where it is exposed to direct sunlight.
• Do not place heat generating items such as candles, ashtrays, incense, flammable gas or explosive materials near the product.
• Do not place a water containing vessel on this apparatus, as this can result in a risk of fire or electric shock.
• Do not expose this apparatus to rain or place it near water(near a bathtub, washbowl, kitchen sink, or laundry tub, in a wet
basement, or near a swimming pool etc.). If this apparatus accidentally gets wet, unplug it and contact an authorized dealer
immediately. Make sure to pull out the power cord from the outlet before cleaning.
• This apparatus use batteries. In your community there might be regulations that require you to dispose of these batteries properly
under environmental considerations. Please contact your local authorities for disposal or recycling information.
• Do not overload wall outlets, extension cords or adaptors beyond their capacity, since this can result in fire or electric shock.
• Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them,
paying particular attention to cords at plug end, adaptors and the point where they exit from the appliance.
• To protect this apparatus from a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the
wall outlet and disconnect the antenna or cable system.
This will prevent damage to the set due to lightning and power line surges.
• Before connecting the AC power cord to the DC adaptor outlet, make sure the voltage designation of the DC adaptor corresponds
to the local electrical supply.
• Never insert anything metallic into the open parts of this apparatus. Doing so many create a danger of electric shock.
• To avoid electric shock, never touch the inside of this apparatus. Only a qualified technician should open this apparatus.
• Make sure to plug the power cord in until it is firmly inserted. When removing the power cord, make sure to hold the power plug
when pulling the plug from the outlet. Do not touch the power cord with wet hands.
• If this apparatus does not operate normally - in particular, if there are any unusual sounds or smells coming from it
- unplug it immediately and contact an authorized dealer or service center.
• Be sure to pull the power plug out of the outlet if the TV is to remain unused or if you are to leave the house for an extended period
of time (especially when children, elderly or disabled people will be left alone in the house).
- Accumulated dust can cause an electric shock, an electric leakage or a fire by causing the power cord to generate sparks and
heat or the insulation to deteriorate.
• Be sure to contact an authorized service center, when installing your set in a location with heavy dust, high or low temperatures,
high humidity, chemical substances and where it operates for 24 hours such as the airport, the train station etc. Failure to do so
may cause serious damage to your set.
• Use only a properly grounded plug and receptacle.
- An improper ground may cause electric shock or equipment damage. (Class l Equipment only.)
• To disconnect the apparatus from the mains, the plug must be pulled out from the mains socket, therefore the mains plug shall be
readily operable.
• Do not allow children to hang onto the product.
• Store the accessories (battery, etc.) in a location safely out of the reach of children.
• Do not install the product in an unstable location such as a shaky self, a slanted floor or a location exposed to vibration.
• Do not drop or impart any shock to the product. If the product is damaged, disconnect the power cord and contact a service center.

WARNING - TO PREVENT THE SPREAD OF FIRE,

KEEP CANDLES OR OTHER OPEN FLAMES AWAY
FROM THIS PRODUCT AT ALL TIMES.

[UD5000-XU]BN68-03432J.indb 19 2011-05-17 �� 5:19:18

 Wiring the Mains Power Supply Plug (UK Only)
IMPORTANT NOTICE
The mains lead on this equipment is supplied with a moulded plug incorporating a fuse. The value of the fuse is indicated on
the pin face of the plug and, if it requires replacing, a fuse approved to BSI1362 of the same rating must be used.
Never use the plug with the fuse cover omitted if the cover is detachable. If a replacement fuse cover is required, it must be of
the same colour as the pin face of the plug. Replacement covers are available from your dealer.
If the fitted plug is not suitable for the power points in your house or the cable is not long enough to reach a power point, you
should obtain a suitably approved extension lead or consult your dealer for assistance. However, if there is no alternative but to
cut off the plug, remove the fuse and then safely dispose of the plug.
Do NOT connect the plug to a mains socket as there is a risk of shock hazard from the bared flexible cord.

IMPORTANT
The wires in the mains lead are coloured in accordance with the following code:
BLUE - NEUTRAL BROWN - LIVE
As these colours may not correspond to the coloured markings identifying the terminals in your plug, proceed as follows :
The wire coloured BLUE must be connected to the terminal marked with the letter N or coloured BLUE or BLACK. The wire
coloured BROWN must be connected to the terminal marked with the letter L or coloured BROWN or RED.

WARNING:
DO NOT CONNECT EITHER WIRE TO THE EARTH TERMINAL, WHICH IS MARKED WITH THE
LETTER E OR BY THE EARTH SYMBOL , OR COLOURED GREEN OR GREEN AND YELLOW.

Warranty Card

UNITED KINGDOM REPUBLIC OF IRELAND

(EIRE)
This Samsung product is warranted for a period of twelve (12) months from the original date of purchase, against defective
materials and workmanship. In the event that warranty service is required, you should return the product to the retailer from
whom it was purchased. However, Samsung Authorised Dealers and Authorised Service Centres in other EC Countries will
comply with the warranty on the terms issued to purchasers in the country concerned. In case of difficulty, details of our
Authorised Service Centres are available from:

Samsung Customer Support Centre, PO Box 479, Gateshead, NE9 9BJ United Kingdom
Telephone: 0330 SAMSUNG (7267864) Fax: 0330 7260001 (UK & Northern Ireland)
Tel: 0818 717 100 Fax: +44 (0)117 915 6736 (EIRE Only)
Web : www.samsung.com

WARRANTY CONDITIONS
1. The warranty is only valid if, when warranty service is required, the warranty card is fully and properly completed and
is presented with the original invoice or sales slip or confirmation, and the serial number on the product has not been
defaced.
2. Samsung’s obligations are limited to the repair or, at its discretion, replacement of the product or the defective part.
3. Warranty repairs must be carried out by Authorised Samsung Dealers or Authorised Service Centres. No re-imbursement
will be made for repairs carried out by non Samsung Dealers and, any such repair work and damage to the products
caused by such repair work will not be covered by this warranty.
4. This product is not considered to be defective in materials nor workmanship by reason that it requires adaptation in
order to conform to national or local technical or safety standards in force in any country other than the one for which the
product was originally designed and manufactured.

[UD5000-XU]BN68-03432J.indb 20 2011-05-17 �� 5:19:18

 This page is intentionally
left blank.

[UD5000-XU]BN68-03432J.indb 21 2011-05-17 �� 5:19:18