Metal Tek Screw
Metal Tek Screw
Metal Tek Screw
PRODUCT DATASHEET
BI-METAL TEK SCREW
Product Details
Designed for Purpose: Fastening in aluminium sheeting and panels
Head style: Hexagonal
Drive bit: 5/16” hexagonal
Thread form: Twin, coarse thread (Tek 3)
Shank material: Stainless steel
Material grade: AISI A304
Coating: Electroplated zinc
Recommended drill speed: 1500 – 2500 RPM
Technical Data
Ultimate pull out values
Steel Thickness
Diameter Drill point
1.2mm 1.6mm 2.0mm 2.5mm 3.0mm 4.0mm
6.3mm Tek 3 1.9kN 2.4kN 3.2kN 4.0kN 4.9kN 6.5kN
NOTE: The results expressed in the datasheet are taken as mean loads from a range of empirical tests and are ultimate unfactored loads. Each specifier or end user should make
>
his/ her own decision on what safety factors to use relevant to their design application (such as BS 5950, EN 1991, etc).
Errors and Omissions Excepted.
Copyright © 2018 Evolution Fasteners (UK) Ltd. All rights reserved.
ABOUT All test results were derived from empirical testing performed by ETAS
(Evolution Testing & Analytical Services), a UKAS (United Kingdom Accreditation
OUR Service) accredited testing laboratory (Accreditation No. 7485). The following tests
were performed to the following standards.