Screw Compressors: Boge Air. The Air To Work

BOGE AIR. THE AIR TO WORK.
SCREW COMPRESSORS
Over 100,000 compressed air users
expect more when it comes to their
compressed air supply.
BOGE air provides them with
the air to work.
For more than three decades BOGE screw compressors

“Made in Germany” have stood the test of time: in
industry and trade - from the one-man workshop to
the automotive industry and the large refineries. Today,
BOGE screw compressors have much more to offer
than just compressed air: state-of-the-art technology, a
modular design concept and maximum energy efficiency
ensures that they meet the high reliability and efficiency
standards customers have come to expect from BOGE.

CONTENTS
SCREW COMPRESSORS 4
BOGE C SERIES
up to 7,5 kW 14
up to 22 kW 22
BOGE S SERIES 30
BOGE SERVICE 50
Screw Compressors 3
Nature does not waste energy.
Our screw compressors are also built
using this principle.
Thermal
COOLING
SECTION
DRIVE
COOLING AIREND
AIRFLOW ELECTRONICS
Gravity
Intelligent engineering from BOGE: The three main sections of the BOGE screw compressor
(electrics & drive, compressor, independent cooling unit) are strategically aligned in the
main cooling air flow: for maximum efficiency and service life.
4 BOGE AIR. THE AIR TO WORK.

Efficiency made easy: According to our engineers, the design of the
BOGE screw compressor is very much based on the principles of nature.
High outputs, effective oil separation, and an extremely long service life
of the component parts ensure that energy consumption is optimised.
THERMAL ADVANTAGE: THE BOGE COOLING AIR FLOW.

Warm air rises: Our engineers harnessed this Efficiency advantage: The intake filter is Service life advantage: Motor, switch cabinet
simple law of physics in order to make BOGE positioned in the coolest part of the cooling and all electric components are positioned at
screw compressors even more efficient and to airflow and takes in the air for compression the intake of the main cooling airflow and
prolong their service life. Cooling air is taken in at the lowest temperature. This results in an benefit from the coolest air. As a result these
at the lowest point in the package by a separate optimised volumetric efficiency and output from components do not overheat either in load or
cooling air fan and is drawn over the component the compressor. The air/oil cooler, on the other in idle mode which means their service life is
parts upwards before leaving the compressor at hand, is positioned at the top of the compressor extended considerably. There are no heat sinks
the highest point – our so called chimney effect. station. The cooler is generously dimensioned within the cabinet in either operating mode.
This main cooling air flow is many times higher and, in conjunction with the cooling airflow,
than the actual cooling air flow of the integrated provides for the lowest possible internal cabinet
motor fan. Due to chimney principle, the system temperature as well as discharge compressed
keeps cooling even during load reversal. air temperature. When connected directly to
ducting, the cooling air can be removed without
any problems or recovered and easily redirected
to supplement space heating.
GRAVITY ADVANTAGE: THE BOGE OIL SEPARATION SYSTEM.

Oil always flows to the lowest point: Efficiency advantage: The BOGE oil Long-life service advantage: BOGE oil
Therefore our engineers have positioned the oil separation system is designed to minimise separator cartridges have a long service life –
pre-separator horizontally at the lowest point of internal pressure losses and to ensure a residual not only as a result of the highly effective oil
the system. Also due to rapid reduction of the oil content of 1-3 mg/m3 in every operating pre-separation but also because of the large
compressed air speed after compression bulk phase. The horizontal combi-tank ensures a low safety distance between the oil surface and the
oil ”rains” from the compressed air into the foam level at load reversal virtually eliminating separator that prevents the oil from migrating
reservoir – a most efficient form of oil the risk of bulk oil reaching the separator into the separator cartridge.
pre-separation. cartridges.
Screw Compressors 5
Quality in its most efficient form:
The BOGE airend.
The heart of every BOGE screw compressor:

The reliable and efficient airend.

Everything is cutting edge: The BOGE airend is the heart of the BOGE
screw compressor. Engineered to exacting tolerances the BOGE airend
combines quality and efficiency with long service life making it one of
the best of its kind and a sound long-term investment for our customers.
Suction end
PREMIUM QUALITY MADE IN GERMANY

Maximum reliability Maximum efficiency Discharge end
BOGE airends are manufactured on state-of- The screw profile of the BOGE airend has
the-art production lines and are examples of been optimised using the latest technological
the finest German engineering. Lowest advancements providing maximum efficiency 2
manufacturing tolerances combined with quality over the entire service life. We calculate the best
materials ensures the dependability of each possible specific power characteristics of each Suction end
airend. Computer controlled testing further airend to ensure the best output per kW of
ensures that every single airend meets our high power whilst ensuring the airend continuously
quality standards. The longest possible service operates at its optimal speed.
life is also assured thanks to generously
dimensioned axial and radial bearings.
Discharge end
Suction end
THE COMPRESSION PROCEDURE

Discharge end
1 Intake:
The air passes through the intake opening into the rotors that are open on the suction side.
4
2 3 Compressing:
As the screw rotates the air intake opening closes. The volume in the chambers is reduced Suction end
and pressure increases. During this procedure, oil is injected to lubricate the rotor bearings,
to seal the rotors, and to dissipate the heat of compression.
4 Discharge:
Compression is completed, final pressure is reached, and discharge starts. Discharge end
Screw Compressors 7
Energy prices cannot be controlled.
But energy efficiency can.
INTELLIGENT CONTROL
The BOGE control and monitoring concept is status of frequency controlled and fixed speed AIRTELLIGENCE
your key to more energy efficient operation. With compressors is displayed. The FOCUS control airtelligence is designed to control up to
BOGE you get a state-of-the-art control system; will optimise load/idling times as well as 16 compressors of different makes and sizes
it can control and monitor the key parameters of downtimes – for ultimate compressed air in a multi-compressor system. It operates
up to 16 compressors whilst optimising off load efficiency. by selecting the appropriate compressor
and idle times by using the most energy efficient combination to meet the compressed air
combination of compressors to ensure the demand and to proficiently configure your
optimum output at the required pressure. system to ensure best possible operating
efficiency: load/idle run switch cycles are
Optimised output: minimised and expensive idle run times virtually
BOGE compressor controllers. eliminated. airtelligence: For a cost-effective
and safe operation!
BASIC
The BASIC controller displays five parameters
as well as fault and maintenance messages
and coupled with modern pressure sensors to Synchronised output:
reliably retrieve the pressure values. The BASIC BOGE Master controllers.
controller can be programmed to ensure
optimum operation of a compressed air system TRINITY
in line with the actual demand. With the trinity controller from BOGE you can
control up to three compressors of equal or
different size or implement an automatic base AIRTELLIGENCE PROVIS
load switching control. The adjustable base load Seeing is believing: airtelligence PROVIS
switching cycle enables a constant load synchronises up to 16 compressors and
operation of all the installed compressors. trinity visualises the central parameters. As a result
can be installed into the compressor switch energy costs can be closely monitored via an
cabinet or provided as a separate wall mounting interface to a web server where you can view
cabinet version. this data at anytime and anywhere around the
world.
FOCUS
FOCUS is the latest generation of BOGE energy
efficiency compressor controllers. A large sized
back-lit LC display, including clear text display,
highlights error/maintenance messages, working
conditions as well as the relevant operating
parameters. In addition, both the operating

Energy costs need not go off course: because BOGE’s energy efficiency solutions
offer a number of options that save energy.
It is calculated that energy costs account for around 75 percent of the lifetime costs
of compressed air generation. This makes energy optimisation essential for any
compressed air user. Significant sustainable savings can be created by continually
auditing and optimising your installation. You should therefore rely on a partner who,
as an energy expert, is ready and able to support you before and after your decision
to purchase compressed air products. Welcome to BOGE!
INTELLIGENT SAVINGS output – without any expensive remodelling or

design related modifications. All pressures and
Perfectly controlled output: BOGE intermediate pressures are available with the
frequency controlled screw compressors best possible outputs.
It takes little or no investment for a compressed
When there is a fluctuating compressed air air user to save as much as 30 percent of their
demand, the BOGE frequency controlled screw compressed air related energy costs. Be sure
compressors works strictly in accordance with to take advantage of BOGE’s energy efficiency
the compressed air demand by producing the solutions to save energy costs. Examples:
exact volume of compressed air at the pressure
required. Leak detection
The volume flow is continually adjusted between A single 2 mm diameter leaking hole causes
25 and 100 percent – correctly specified losses of 260 l/min – this equates to several
frequency controlled compressors should thousand Euros a year of energy costs.
eliminate expensive idling times and even out air Comprehensive leak detection from BOGE will
demand fluctuations. Energy costs can therefore identify any leaks within your compressed air AIReport
be reduced considerably. network. Does your compressor station still meet your
When a frequency controlled compressor is used specific site requirements? Oversized or obsolete
alongside a fixed speed compressor additional Heat recovery components can be the source of high energy
advantages can be achieved. The flexible speed Most of the energy used to generate costs. The AIReport system helps to detect weak
adaptation of the airend also allows for pressure compressed air is rejected in the form of heat. points within a compressed air system by
adaptation. Changing the pressure value of the This heat can be recovered: e.g. for space monitoring compressed air generation, treatment
frequency compressor automatically heating or for the heating of domestic water. and distribution over a set period of time (e.g.
synchronises the output quantity. A 13 bar Up to 85 percent of the input electrical energy one week, two weeks or even a month): this tool
machine can therefore be transformed into an can be recovered: Our energy experts will be will help you save energy!
8 bar machine yielding a correspondingly higher pleased to advise you!
Savings potential of up to 30 %
is possible
with a frequency controlled
compressor:
• minimised idling time
• pressure reduction
• load cycles virtually eliminated. The BOGE sign for efficient compressed air
solutions: Wherever it is displayed, users can
be assured of a particularly efficient BOGE
solution helping to save a great deal of money!
Screw Compressors 9
Why don‘t our compressors cost less?
Because our customers can‘t afford that.
investment costs maintenance

and repair
approx. 15 %
approx. 10 %
Your BOGE advantage:

More than a third of
potential savings with
regard to energy and
maintenance costs are
due to high quality
components and
efficient solutions!
energy costs
approx. 75 %
QUALITY PAYS OFF

Purchase costs represent only a small portion of a compressors life cycle investment costs. Because BOGE compressors
are designed to provide trouble-free and efficient operation for a long period of time, they are in many cases the most cost
effective solution below the line. It is therefore not without good reason that users around the world increasingly rely on
premium quality made by BOGE!

Industry and Trade deserve quality solutions: And, our customers have come
to rely on BOGE for uncompromising quality and intelligent engineering
“Made in Germany”.
More than 100,000 compressed air users around the world know that such
values pay off in the long run: because a reliable, efficient and durable supp-
ly of compressed air is paramount to the operation of their business.
German engineering Strict guidelines Permanent optimisation

The use of high quality materials and a reduced The prototypes of newly developed BOGE All BOGE products are subject to permanent
number of wear parts makes the BOGE product products are subjected to all kinds of practical quality audits and assessed according to the
as efficient and reliable as our demanding tests. For example fatigue tests under extreme latest industry standards and practical
customers rightfully expect. The entire BOGE conditions are carried out to determine the experience – which translates into continuous
production process is subject to permanent product‘s readiness for the market prior to improvement for the benefit of our customers.
quality control – from inspection of incoming release for series production. No BOGE product You are welcome to contact our energy efficiency
material to final inspection and testing – with leaves the Bielefeld facility without completing a experts for more details on how to realise
all positions closely monitored by experienced personal final inspection protocol. This document additional savings potentials in your compressed
quality officers. And when it comes to product has to be signed off by our employee. air system. Use the BOGE AIReport or carry out
development, BOGE ranks among the first for leak detection in order to save ready cash:
German engineering: Repeatedly our innovations Please do not hesitate to contact us!
are considered as industry trendsetters and are
often protected by Worldwide patents.
Screw Compressors 11
Compressed air with a method: Modules
of BOGE screw compressors.
Screw compressor
Compressed air receiver Refrigerant dryer Frequency control
ADVANTAGES OF THE COMPACT MODULAR DESIGN:

• Flexible combination possibilities
• Unit completely ready for connection
• Minimum flow losses due to compact construction
• High-quality piping protects against leakages

Modular design, compact system: Because of the modular design
BOGE screw compressors allow for individual configuration of your
compressed air system. Each compact module is pre-assembled
and ready for use: for efficient and reliable operation in all types of
applications.
PERFORMANCE OVERVIEW OF THE C SERIES

PS kW C CD CF CDF
30 22 30 30 30 30
25 18,5 CL 25 CL- CLD- 25 25 25
20 15 20 20 20 20 20 20 20
15 11 15 C 15 15 15 CD 15 CLF CLF- CLDF-
10 7,5 CL 10 9 CL- 10 CLD- 10 9 9 9 9
7,5 5,5 7 7 7 7 7
5,5 4 5 5 5 5 5
4 3 4 4 4 4 4
3 2,2 3 3 3
frequency controlled
PERFORMANCE OVERVIEW OF THE S SERIES
PS kW SL
480 355 481
430 315 S SL 431
340 250 341 340 341 SLF
270 200 S 271 270 271
220 160 220 221
180 132 S 180 SD SF SDF
150 110 150 151 150 150 SLF 150
125 90 S 125 SD 125 SF 125 SDF
100 75 100-2 101 100-2 101 100-2 101 100-2
90 65 90-2 90-2 SLF
75 55 75-2 75-2
S SD SF 75 SDF
60 45
60-2 61-2 60-2 61-2 60-2 61 60-2
50 37
50-2 50-2 51 SLDF
40 30 S(-) SD(-) SF SDF
40-2 40-2 40 40
30 22 29-2 29-2 29-2 29-2
31-2 31-2 30 30
25 18,5 24-2 24-2
24-2 24-2
20 15 20-2 20-2
S(-) SD(-) SF SDF
15 11
15 15 15 15
10 7,5
10 10
frequency controlled
The C series up to 7.5 kW: Space saving
and more energy efficient than ever!
Design advantages.
THE CM COMPACT MODULE:
All necessary components are integrated into the airend block. Maintenance and wear
parts are easily accessible – for maximum comfort and highest operational safety.
Integrated oil separating system

Both oil separating cartridge and oil filter
cartridge are easily accessible: for maintenance
purposes only the cover needs to be opened. Multifunctional intake control with
The oil sump is located at the lowest point: for integrated solenoid valve for functionally
effective pre-separation according to the gravity reliable operation without leakages.
principle.
Minimum pressure / Silenced intake filter with

check valve* paper filter cartridge
The filter separates 99.9 percent of all particles
larger than 3 µm: assuring high quality
compressed air right at its source.
BOGE airend with special BOGE

profile and HD bearing
The specially designed airend is characterised
by its high output and low energy consumption.
* Minimum
pressure / check
valve
Integrated design
eliminates piping –
for maximum leakage
safety.
Temperature sensor
CNC machined cast iron housing

High quality machining eliminates the risk of
leakage. The heavy cast iron housing also serves
Thermo-static oil level regulation to reduce noise right at the source.
Easily accessible from the outside.

Compact & highly efficient! The monoblock compact design of the
airend range up to 7.5 kW offers distinct advantages. The integrated
design minimises the number of oil pipes by clever internal routing -
for a highly efficient and reliable compressor. At the same time the
airend requires less space providing the user with a compact, space
saving and energy efficient solution from BOGE!
COMPACT DESIGN EXTREMELY QUIET HIGHEST EFFICIENCY

Integration of all essential components Because of the sound adsorbing graphite casting The BOGE airend design ensures industry
eliminates almost all interconnecting pipes. the C series is very quiet in operation and leading specific power ratios (Optimised output
Leakages are virtually eliminated. Internal vibration free. No further silencing is volumes at low energy consumption).
pressure losses are minimised. required. The canopy versions C-/CD series are
therefore super-silent with low sound pressure
values.
CONTROL OPTIONAL FREQUENCY CONTROL OPTIONAL REFRIGERATION DRYER

The compressor has BASIC control system with The frequency converter in the CLF-/CLDF series The C series can be equipped with a refrigeration
LC display and pressure transducer technology. flexibly controls the motor speed and therefore dryer as an option – either top mounted on a
FOCUS control is available as an option that the airend. This ensures the compressor output compressed air receiver (CLD-/CLDF series) or
offers additional monitoring and control features automatically adjusts to the momentary demand. horizontally mounted (CD series). No additional
(CL(D)F and C-/CD series). FOCUS is also Soft starting via the frequency convertor also space is required for the generation of dry
programmed to act as a changeover switch and avoids undue wear and tear and prolongs the compressed air.
can control up to three compressors. service life of the compressor.
C Series Screw Compressors 15

Screw compressor CL 3 to CL 7
Compressed air system CL 3- to CL 7-
Compressed air centre CLD 3- to CLD 7-
Effective free air delivery:
0.234 – 0.728 m³/min, 8 – 25 cfm
Pressure range: 10 and 13 bar, 150 and 190 psig
Motor range: 2.2 – 5.5 kW, 3 – 7.5 HP
Screw compressor CL
Compact screw compressor, direct coupled
Compressed air system CL-

Receiver mounted screw compressor,
direct coupled
Compressed air centre CLD-

Receiver mounted screw compressor and
refrigerant dryer, direct coupled

BOGE Max. pressure Effective free air deli- Effective free air Motor Dimensions Weight
Model very* 50 Hz delivery* 60 Hz power WxDxH
bar psig m3/min cfm m3/min cfm kW HP mm kg
CL 3 10 150 0.240 9 – – 2.2 3.0 755 x 485 x 495 105
CL 4 10 150 0.340 12 0.31 11 3.0 4.0 755 x 485 x 495 110
CL 4 13 190 0.234 8 – – 3.0 4.0 755 x 485 x 495 110
CL 5 10 150 0.545 19 0.40 14 4.0 5.5 755 x 485 x 495 125
CL 7 10 150 0.728 25 – – 5.5 7.5 755 x 485 x 495 130
CL 7 13 190 0.525 19 – – 5.5 7.5 755 x 485 x 495 130
* Free air delivery figures in accordance with ISO 1217, Appendix C, at 20ºC ambient temperature and maximum pressure. Emitted sound pressure levels from 61 dB(A) according
to DIN EN ISO 2151:2009
BOGE Max. pressure Receiver Effective free air Effective free air Motor Receiver Dimensions Weight
Model volume delivery* 50 Hz delivery* 60 Hz power option WxDxH
bar psig Litres m3/min cfm m3/min cfm kW HP Litres mm kg
CL 3- 10 150 90 0.240 9 – – 2.2 3.0 270 1130 x 490 x 920 155
CL 4- 10 150 90 0.340 12 0.31 11 3.0 4.0 270 1130 x 490 x 920 160
CL 4- 13 190 90 0.234 8 – – 3.0 4.0 270 1130 x 490 x 920 165
CL 5- 10 150 90 0.545 19 0.40 14 4.0 5.5 270 1130 x 490 x 920 175
CL 7- 10 150 90 0.728 25 – – 5.5 7.5 270 1130 x 490 x 920 180
CL 7- 13 190 90 0.525 19 – – 5.5 7.5 270 1130 x 490 x 920 185
BOGE Max. pressure** Receiver Effective free air Effective free air Motor Dimensions Weight
Model volume delivery* 50 Hz delivery* 60 Hz power WxDxH
bar psig Litres m3/min cfm m3/min cfm kW PS mm kg
CLD 3- 10 150 270 0.240 9 – – 2.2 3.0 1700 x 590 x 1130 225
CLD 4- 10 150 270 0.340 12 0.31 11 3.0 4.0 1700 x 590 x 1130 230
CLD 4- 13 190 270 0.234 8 – – 3.0 4.0 1700 x 590 x 1130 250
CLD 5- 10 150 270 0.545 19 0.40 14 4.0 5.5 1700 x 590 x 1130 245
CLD 7- 10 150 270 0.728 25 – – 5.5 7.5 1700 x 590 x 1130 250
CLD 7- 13 190 270 0.525 19 – – 5.5 7.5 1700 x 590 x 1130 270
** Max. pressure of the compressor

Screw compressor C 4 to C 9
Compressed air station CD 4 to CD 9
Effective free air delivery: 0.28 – 1.2 m³/min, 10 – 42 cfm
Pressure range: 8 – 13 bar, 115 – 190 psig
Motor range: 3 – 7,5 kW, 4 – 10 HP
C 4 to C 7 C 9 and CD 4 to CD 9
EFFICIENCY REFRIGERANT DRYER EXTREMELY QUIET CONTROL

The specially designed BOGE As an option the compressor can All C series compressors are BASIC control is the standard
airend provides high output be supplied with a horizontal characterised by very low sound compressor controller with LC
volumes at low energy refrigerant dryer (CD series). No pressure levels due to their super- display and pressure sensor
consumption – for reliable and additional footprint is required. silenced cabinets. technology. The FOCUS control,
efficient compressed air supply. offering additional monitoring and
control options, is available as an
optional extra.

Compact, efficient, very quiet: The space saving C series screw compressors
are designed for long-term performance. A refrigerant dryer mounted on a
horizontal receiver is available as an option. Even at full load operation the
compressor operates reliably and safely at optimum efficiency providing a
long service life.
BOGE Max. pressure** Effective free air delivery* Motor power Dimensions Weight
Model WxDxH
bar psig m3/min cfm kW HP mm kg
C4 8 115 0.427 15 3.0 4.0 480 x 920 x 960 190
C4 10 150 0.340 12 3.0 4.0 480 x 920 x 960 190
C4 13 190 0.280 10 3.0 4.0 480 x 920 x 960 190
C5 8 115 0.630 22 4.0 5.5 480 x 920 x 960 195
C5 10 150 0.545 19 4.0 5.5 480 x 920 x 960 195
C5 13 190 0.440 15 4.0 5.5 480 x 920 x 960 195
C7 8 115 0.900 32 5.5 7.5 480 x 920 x 960 210
C7 10 150 0.770 27 5.5 7.5 480 x 920 x 960 210
C7 13 190 0.642 23 5.5 7.5 480 x 920 x 960 210
C9 8 115 1.200 42 7.5 10.0 480 x 1000 x 1240 215
C9 10 150 1.100 39 7.5 10.0 480 x 1000 x 1240 215
C9 13 190 0.900 32 7.5 10.0 480 x 1000 x 1240 215
CD 4 8 115 0.427 15 3.0 4.0 480 x 1000 x 1240 210
CD 4 10 150 0.340 12 3.0 4.0 480 x 1000 x 1240 210
CD 4 13 190 0.280 10 3.0 4.0 480 x 1000 x 1240 210
CD 5 8 115 0.630 22 4.0 5.5 480 x 1000 x 1240 215
CD 5 10 150 0.545 19 4.0 5.5 480 x 1000 x 1240 215
CD 5 13 190 0.440 15 4.0 5.5 480 x 1000 x 1240 215
CD 7 8 115 0.900 32 5.5 7.5 480 x 1000 x 1240 230
CD 7 10 150 0.770 27 5.5 7.5 480 x 1000 x 1240 230
CD 7 13 190 0.642 23 5.5 7.5 480 x 1000 x 1240 230
CD 9 8 115 1.200 42 7.5 10.0 480 x 1000 x 1240 235
CD 9 10 150 1.100 39 7.5 10.0 480 x 1000 x 1240 235
CD 9 13 190 0.900 32 7.5 10.0 480 x 1000 x 1240 235
* Free air delivery figures in accordance with ISO 1217, Appendix C, at 20ºC ambient temperature and maximum pressure. Emitted sound pressure levels from 59 dB(A) according to
DIN EN ISO 2151:2009.

Screw compressor CLF 9 /
Compressor system CLF 9- / Compressed air centre CLDF 9- /
with frequency control
0.24 – 1.27 m³/min, 8 – 45 cfm
Motor range: 7,5 kW, 10 HP
CLF 9- (super-silenced
as option)
CLF 9 (super-silenced as option)

CLDF 9-
FREQUENCY CONTROL MAXIMUM EFFICIENCY REFRIGERANT DRYER CONTROL

The frequency converter flexibly The airend operates at the The CLDF version is equipped with The compressor is controlled via
controls the motor speed and necessary speed to generate as a refrigerant dryer. This enables the BOGE BASIC control with LC
therefore the airend this ensures much compressed air as is required. users to generate dry air without display and pressure sensor
the compressor output Expensive idling as well as load/no any additional space requirements. technology. The BOGE FOCUS
automatically adjusts to the load cycles are thus eliminated. At control is available as an optional
momentary demand. the same time, a tighter pressure extra, offering further monitoring
band can be maintained, also and control possibilities.
helping to save energy.

The ideal operating mode: The frequency controlled CLF series automati-
cally adjusts to the air demand whilst controlling the pressure perfectly.
In the event of a change of the pressure value, the output automatically
adjusts. For example a 13 bar machine regulated to an 8 bar yields a
correspondingly higher output – without any expensive remodelling or
design related modifications.
BOGE Max. Receiver Effective free Motor Dimensions Dimensions Com- Weight Weight
Model pressure** volume air delivery* power silenced super-silenced pressed silenced super-
WxDxH W x D x H air outlet silenced.
bar psig Litres m3/min cfm kW HP mm mm kg kg
CLF 9 8 115 – 0.26-1.27 9-45 7.5 10 1020 x 532 x 723 1020 x 532 x 796 G 1/2 200 208
CLF 9 10 150 – 0.25-1.12 9-40 7.5 10 1020 x 532 x 723 1020 x 532 x 796 G 1/2 200 208
CLF 9 13 190 – 0.24-0.93 8-33 7.5 10 1020 x 532 x 723 1020 x 532 x 796 G 1/2 200 208
CLF 9- 8 115 270 0.26-1.27 9-45 7.5 10 1820 x 633 x 1270 1820 x 633 x 1343 G 1/2 315 323
CLF 9- 10 150 270 0.25-1.12 9-40 7.5 10 1820 x 633 x 1270 1820 x 633 x 1343 G 1/2 315 323
1
CLF 9- 13 190 250 0.24-0.93 8-33 7.5 10 1620 x 633 x 1270 1620 x 633 x 1343 G /2 310 318
CLDF 9- 8 115 270 0.26-1.27 9-45 7.5 10 1820 x 633 x 1270 1820 x 633 x 1343 G 1/2 362 370
CLDF 9- 10 150 270 0.25-1.12 9-40 7.5 10 1820 x 633 x 1270 1820 x 633 x 1343 G 1/2 362 370
CLDF 9- 13 190 250 0.24-0.93 8-33 7.5 10 1620 x 633 x 1270 1620 x 633 x 1343 G 1/2 357 365
* Free air delivery figures in accordance with ISO 1217, Appendix E, at 20ºC ambient temperature and maximum pressure. Emitted sound pressure levels from 72 dB(A) according to
DIN EN ISO 2151:2009
Ask for further receiver dimensions.

The C series up to 22 kW: This is the
way compressors are made today!
Design advantages.
Multifunctional intake control with Silenced paper cartridge intake filter

integrated solenoid valve for functionally This filter separates 99.9 percent of all particles
reliable operation without leakages. larger than 3 µm: for high quality compressed air
at its source.
Integrated airend with special BOGE profile

and HD bearing
The specially designed airend is characterised
by its high free air delivery at low energy
consumption. Motor sizes up to 22 kW with free
air delivery up to 3,62 m³/min.
Effective oil pre-separation harnessing to the

laws of gravity. Service friendly access.
Minimum pressure valve / check valve

Integrated design serves to eliminate
pipework – virtually eliminates the risk of oil Oil control valve, zeasily accessible
leakages. from the outside.

The state-of-the-art compressor: Extremely quiet, compact & efficient –
the „large“ BOGE C series has set industry standard in specific power and
sound pressure values. The BOGE compact module enables short distances
and less pipelines - for a highly efficient and reliable compressor solution.
Depending on your requirements, the C series up to 22 kW can be equipped
with refrigerant dryer, frequency control or heat recovery: This is the way
compressors are made today!
INTEGRATED DESIGN COMPACT EFFICIENCY CONTROL

The integration of all essential components in the The BOGE C series is engineered to generate BASIC control with LC display and pressure
compact module serves to eliminate pipework and high free air deliveries in continuous operation sensor technology is fitted standard. FOCUS
to reduce flow losses: for maximum operating and in a incomparably efficient manner. Due to control is available as an option and includes an
dependability and efficiency! its compact design space requirements are kept integrated energy efficiency display as well as
to a minimum: an installation surface of less additional monitoring and control options. FOCUS
than 1 square metre is sufficient. software now includes a three compressor
changeover system.
OPTIONAL REFRIGERANT DRYER OPTIONAL HEAT RECOVERY OPTIONAL FREQUENCY CONTROL

The C series can be supplied with an integrated A heat recovery system can be added as an The frequency controlled option (CLF-/CLDF
dryer or, with the CLD series and CD/CDF series, option. Up to 94 percent of the input electrical series) ensures a continuous volume flow
mounted on top of a horizontal air receiver. energy is dissipated through the cooling medium between 25 and 100 percent. This ensures
(air or water) and can be recovered for space adaptation to the momentary demand of the
heating or pre-heating domestic water. compressed air system. Soft starting also avoids
undue wear and tear and prolongs the service
life of the compressor.

Screw compressor CL 10 to CL 20
Compressed air system CL 10- to CL 20-
Compressed air centre CLD 10- to CLD 20-
1.060 – 2.280 m³/min, 37 – 80 cfm
Pressure range: 8 and 10 bar, 115 and 150 psig
Motor range: 7,5 – 15 kW, 10 – 20 PS
Screw compressor CL
Compact screw compressor, directly coupled
Compressed air system CL-

Receiver mounted screw compressor,
direct coupled
Compressed air centre CLD-

Receiver mounted screw compressor and
refrigerant dryer, direct coupled

A class of its own: The directly coupled screw compressors of the CL
series are space saving and extremely efficient at the same time.They are
available with horizontal receiver and/or top mounted refrigeration dryer
and can flexibly be adapted to suit particular application requirements.
BOGE Max. pressure Effective free air Effective free air Motor power Dimensions Weight
Model delivery* 50 Hz delivery* 60 Hz BxTxH
bar psig m3/min cfm m3/min cfm kW PS mm kg
CL 10 8 115 1,100 38 1,07 37 7,5 10,0 1171 x 599 x 595 260
CL 10 10 150 1,060 37 1,03 36 7,5 10,0 1171 x 599 x 595 260
CL 15 8 115 1,770 62 – – 10,0 15,0 1333 x 599 x 606 290
CL 15 10 150 1,700 60 – – 10,0 15,0 1333 x 599 x 606 290
CL 20 8 115 2,280 80 2,21 78 15,0 20,0 1333 x 599 x 606 300
CL 20 10 150 2,240 79 2,17 76 15,0 20,0 1333 x 599 x 606 300
BOGE Max. pressure Receiver Effective free air Effective free air Motor power Receiver Dimensions Weight
Model volume delivery* 50 Hz delivery* 60 Hz option BxTxH
bar psig Litres m3/min cfm m3/min cfm kW PS Litres mm kg
CL 10- 8 115 350 1.100 38 1.07 37 7.5 10.0 500 1729 x 620 x 1229 370
CL 10- 10 150 350 1.060 37 1.03 36 7.5 10.0 500 1730 x 620 x 1229 370
CL 15- 8 115 350 1.770 62 – – 10.0 15.0 500 1731 x 620 x 1229 410
CL 15- 10 150 350 1.700 60 – – 10.0 15.0 500 1732 x 620 x 1229 410
CL 20- 8 115 350 2.280 80 2.21 78 15.0 20.0 500 1733 x 620 x 1229 430
CL 20- 10 150 350 2.240 79 2.17 76 15.0 20.0 500 1734 x 620 x 1229 430
BOGE Max. pressure** Behälter- Effective free air Effective free air Motor power Dimensions Weight
Model inhalt delivery* 50 Hz delivery* 60 Hz BxTxH
bar psig Liter m3/min cfm m3/min cfm kW PS mm kg
CLD 10- 8 115 350 1.100 38 1.07 37 7.5 10.0 1814 x 620 x 1282 400
CLD 10- 10 150 350 1.060 37 1.03 36 7.5 10.0 1815 x 620 x 1282 400
CLD 15- 8 115 350 1.770 62 – – 10.0 15.0 1813 x 620 x 1282 440
CLD 15- 10 150 350 1.700 60 – – 10.0 15.0 1814 x 620 x 1282 440
CLD 20- 8 115 350 2.280 80 2.21 78 15.0 20.0 1813 x 620 x 1282 460
CLD 20- 10 150 350 2.240 79 2.17 76 15.0 20.0 1814 x 620 x 1282 460

Screw compressor C 15 to C 30
Compressed air station CD 15 to CD 30
1.35 – 3.62 m³/min, 47 – 127 cfm
Pressure range: 8 to 13 bar, 115 to 190 psig
Motor range: 11 – 22 kW, 15 – 30 HP
MAXIMUM EFFICIENCY EXTREMELY QUIET REFRIGERANT DRYERS CONTROL

The BOGE C series up to 22 kW is All C series compressors feature The CD series screw compressors The compressor is controlled by
characterised by its industry very low sound pressure levels. include an integrated refrigerant the BASIC control system with LC
leading specific power ratios. dryer for high quality compressed display and pressure sensor
You rarely come across such air. No additional footprint is technology.
compact screw compressor required. The FOCUS control system is
efficiency. available as an option.

Real winners: The belt driven C series models up to 22 kW are highly
efficient and extremely quiet in operation requiring only a minimum foot-
print. The footprint is even kept to a minimum with the CD series which
includes an integrated refrigerant dryer.
An integrated design means short distances and extremely low pressure
losses. As well as generating industry leading outputs, the C series is also
very energy efficient.
BOGE Max. pressure Effective free air Motor Dimensions Compressed Weight
Model delivery* power WxDxH air outlet

C 15 8 115 1.89 66 11.0 15 772 x 1056 x 1735 G1 432
C 15 10 150 1.63 57 11.0 15 772 x 1056 x 1735 G1 432
C 15 13 190 1.35 47 11.0 15 772 x 1056 x 1735 G1 432
C 20 8 115 2.55 90 15.0 20 772 x 1056 x 1735 G1 438
C 20 10 150 2.25 79 15.0 20 772 x 1056 x 1735 G1 438
C 20 13 190 1.89 66 15.0 20 772 x 1056 x 1735 G1 438
C 25 8 115 3.10 109 18.5 25 772 x 1056 x 1735 G1 499
C 25 10 150 2.71 95 18.5 25 772 x 1056 x 1735 G1 499
C 25 13 190 2.32 81 18.5 25 772 x 1056 x 1735 G1 499
C 30 8 115 3.62 127 22.0 30 772 x 1056 x 1735 G1 461
C 30 10 150 3.21 113 22.0 30 772 x 1056 x 1735 G1 461
C 30 13 190 2.71 95 22.0 30 772 x 1056 x 1735 G1 461
* Free air delivery for the complete package in accordance with ISO 1217, Appendix C, at 20ºC ambient temperature and maximum pressure. Emitted sound pressure values from 63 dB(A) according
BOGE Max. pressure Effective free air Motor Dimensions Compressed Weight
Model delivery* power WxDxH air outlet

CD 15 8 115 1.89 66 11.0 15 1072 x 1056 x 1735 G1 532
CD 15 10 150 1.63 57 11.0 15 1072 x 1056 x 1735 G1 532
CD 15 13 190 1.35 47 11.0 15 1072 x 1056 x 1735 G1 532
CD 20 8 115 2.55 90 15.0 20 1072 x 1056 x 1735 G1 538
CD 20 10 150 2.25 79 15.0 20 1072 x 1056 x 1735 G1 538
CD 20 13 190 1.89 66 15.0 20 1072 x 1056 x 1735 G1 538
CD 25 8 115 3.10 109 18.5 25 1072 x 1056 x 1735 G1 599
CD 25 10 150 2.71 95 18.5 25 1072 x 1056 x 1735 G1 599
CD 25 13 190 2.32 81 18.5 25 1072 x 1056 x 1735 G1 599
CD 30 8 115 3.62 127 22.0 30 1072 x 1056 x 1735 G1 561
CD 30 10 150 3.21 113 22.0 30 1072 x 1056 x 1735 G1 561
CD 30 13 190 2.71 95 22.0 30 1072 x 1056 x 1735 G1 561

Screw compressor CF 20 to CF 30
Compressed air station CDF 20 to CDF 30
0.47 – 3.62 m³/min, 17 – 127 cfm
Pressure range: 8 to 13 bar, 115 to 190 psig
Available from
January 2011 !
MAXIMUM EFFICIENCY FREQUENCY CONTROL REFRIGERANT DRYER CONTROL

The BOGE C series up to 22 kW is The optional frequency converter The CDF series include an The compressor is controlled by
characterised by its industry (CLF-/CLDF series) ensures a integrated refrigerant dryer for the FOCUS control system which
leading specific power ratios – for continuous volume flow between extremely high compressed air includes an integrated efficiency
efficient compressed air supply. 25 and 100 percent. This allows quality. display as well as additional
adaptation to the momentary monitoring and control options.
demand of the compressed air FOCUS is programmed as a
system. Soft starting also avoids changeover switch and can control
undue wear and tear and prolongs up to three machines.
the service life of the compressor.

This is as efficient as it gets: With these frequency controlled belt driven
compressors you can rest assure that lower compressed air demand
translates into reduced energy consumption with the frequency inverter
continuously adjusting the volume flow to the actual demand. This leads to
minimised idling times and pressure fluctuations. Soft starting also avoids
undue wear and tear and prolongs the service life of the compressor.
BOGE Max. pressure Effective free air Motor Maße Compressed Weight
Model delivery* power BxTxH air outlet

CF 20 8 115 0.64-2.55 23-90 15.0 20 772 x 1056 x 1735 G1 448
CF 20 10 150 0.56-2.25 20-79 15.0 20 772 x 1056 x 1735 G1 448
CF 20 13 190 0.47-1.89 17-66 15.0 20 772 x 1056 x 1735 G1 448
CF 25 8 115 0.78-3.10 27-109 18.5 25 772 x 1056 x 1735 G1 509
CF 25 10 150 0.68-2.71 24-95 18.5 25 772 x 1056 x 1735 G1 509
CF 25 13 190 0.58-2.32 20-81 18.5 25 772 x 1056 x 1735 G1 509
CF 30 8 115 0.91-3.62 32-127 22.0 30 772 x 1056 x 1735 G1 471
CF 30 10 150 0.80-3.21 28-113 22.0 30 772 x 1056 x 1735 G1 471
CF 30 13 190 0.68-2.71 24-95 22.0 30 772 x 1056 x 1735 G1 471
* Free air delivery for the complete package in accordance with ISO 1217, Appendix E, at 20ºC ambient temperature and maximum pressure. Emitted sound pressure values from 63 dB(A)
according to DIN EN ISO 2151:2009 ).
BOGE Max. pressure** Effective free air Motor Maße Compressed Weight
Model delivery* power BxTxH air outlet

CDF 20 8 115 0.64-2.55 23-90 15.0 20 1072 x 1056 x 1735 G1 548
CDF 20 10 150 0.56-2.25 20-79 15.0 20 1072 x 1056 x 1735 G1 548
CDF 20 13 190 0.47-1.89 17-66 15.0 20 1072 x 1056 x 1735 G1 548
CDF 25 8 115 0.78-3.10 27-109 18.5 25 1072 x 1056 x 1735 G1 609
CDF 25 10 150 0.68-2.71 24-95 18.5 25 1072 x 1056 x 1735 G1 609
CDF 25 13 190 0.58-2.32 20-81 18.5 25 1072 x 1056 x 1735 G1 609
CDF 30 8 115 0.91-3.62 32-127 22.0 30 1072 x 1056 x 1735 G1 571
CDF 30 10 150 0.80-3.21 28-113 22.0 30 1072 x 1056 x 1735 G1 571
CDF 30 13 190 0.68-2.71 24-95 22.0 30 1072 x 1056 x 1735 G1 571
* Free air delivery for the complete package in accordance with ISO 1217, Appendix E, at 20ºC ambient temperature and maximum pressure. Emitted sound pressure values from 63 dB(A)
according to DIN EN ISO 2151:2009
The S series: Powerful in every detail.
Design advantages.
INTAKE FILTER WITH PAPER

MICROFILTER INSERT
quietly intakes air from the cool section of the
cooling air flow whilst at the same time
intensively cleans it to ensure the longest
possible service life of all downstream
components. The compressor operates trouble-
free even in dusty conditions.
MULTIFUNCTIONAL INTAKE CONTROL

ensures a valve-less oil circuit without oil stop or
check valve and the lowest possible internal
pressure losses. It hermetically seals to prevent
discharge of oil vapours. A fully unloaded start
helps to save energy. The Multifunction control is
intrinsically safe in operation and in the event of
shutdown fails safe. AIREND WITH ELECTRIC MOTOR
The airend is driven by a class F, IP55 standard
motor which is located in the coolest section of
the compressor. BOGE motors have genuine
power reserves and are therefore not
overloaded.

Intelligent design advantage: The award winning BOGE S series design
incorporates a clever cabinet layout with a high quality finish and
maximum efficiency. Every component part incorporates the decade
long know-how of our engineers – advantages paid back through
reliable daily operation.
COOLER SECTION EASY MAINTENANCE INTERNAL PIPEWORK

The self-sufficient section, where the highest All maintenance parts are easily accessible All oil carrying pipes are made of steel
cooling air temperatures occur, is located at from one side of the compressor. This terminating with high quality precision threaded
the top of the compressor in the cooling air reduces maintenance costs to a minimum. joints that are leak proof and safe even under
discharge and houses a generously dimensioned highest pressures. The entire machine utilises
aftercooler with separate cooling air fan and only one hose on the clean air side which also
cooling air guiding hood. The cooling air either serves for vibration damping.
discharges to the atmosphere or ideally, as
heat recovery, to supplement space heating
via ducting.
BOGE SAFETY OIL SEPARATION SYSTEM INTEGRATED SWITCH CABINET OPTIONAL WATER COOLING
Includes horizontal oil separation reservoir, The switch cabinet is integrated into the screw The larger high volume BOGE screw
directly mounted airend and external oil compressor housing. It is fully pre-wired and compressors are available cooled.
separator cartridge. This innovative system ready for use. The cabinet also houses a quick fit
ensures oil separation with virtually no pressure modular microprocessor compressor controller.
losses and a residual oil content of only
1-3 mg/m3 in every operating phase. The
external oil separator cartridge is minimally
loaded: a guarantee for long service life.
S series screw compressors 31

Screw compressor S 10 to S 29-2

Motor range: 7.5 – 22 kW, 10 – 30 HP
VALVE-LESS OIL CIRCUIT DECOUPLED UNIT HORIZONTAL OIL RESERVOIR Control

The BOGE screw compressor is A sub-frame mounted on vibration For long service life and high The compressor is controlled via
designed with a valve-less oil damping feet prevents transmission compressed air quality! The oil the BOGE BASIC control with LC
circuit eliminating the need for oil of structure borne sound. A rigid separation reservoir tank is located display and pressure sensor
stop or check valves. This function basic frame allows easy in the lowest section of the technology. The BOGE FOCUS
provides maximum operating transportation by lift truck or stacker machine and here rapid oil pre- control is available as an optional
safety. truck. separation takes place before the extra, offering further monitoring
compressed air enters the external and control possibilities.
oil separator cartridge.

Dependable output: BOGE S series screw compressors are designed
for flexible and reliable operation in every situation. These industrial
compressors can be tank mounted with or without a dryer. The high
quality workmanship and efficient compact design stand for high
operating safety and maximum efficiency.
BOGE Max. Effective free Motor power Dimensions Dimensions Weight Weight
Model pressure air delivery* super-silenced ultra-silenced super-silenced. ultra-silenced.
WxDxH WxDxH
bar psig m3/min cfm kW HP mm mm kg kg
S 10 8 115 1.18 42 7.5 10 940 x 700 x 970 940 x 700 x 1200 220 235
10 150 1.06 39 7.5 10 940 x 700 x 970 940 x 700 x 1200 220 235
13 190 0.91 32 7.5 10 940 x 700 x 970 940 x 700 x 1200 220 235
S 15 8 115 1.65 58 11.0 15 940 x 700 x 970 940 x 700 x 1200 220 235
10 150 1.45 51 11.0 15 940 x 700 x 970 940 x 700 x 1200 220 235
13 190 1.25 44 11.0 15 940 x 700 x 970 940 x 700 x 1200 220 235
S 20-2 8 115 2.57 91 15.0 20 1200 x 850 x 1150 1200 x 850 x 1500 350 375
10 150 2.24 80 15.0 20 1200 x 850 x 1150 1200 x 850 x 1500 350 375
13 190 1.90 67 15.0 20 1200 x 850 x 1150 1200 x 850 x 1500 350 375
S 24-2 8 115 3.05 108 18.5 25 1200 x 850 x 1150 1200 x 850 x 1500 365 390
10 150 2.66 94 18.5 25 1200 x 850 x 1150 1200 x 850 x 1500 365 390
13 190 2.26 80 18.5 25 1200 x 850 x 1150 1200 x 850 x 1500 365 390
S 29-2 8 115 3.45 122 22.0 30 1200 x 850 x 1150 1200 x 850 x 1500 365 390
10 150 3.11 110 22.0 30 1200 x 850 x 1150 1200 x 850 x 1500 365 390
13 190 2.57 91 22.0 30 1200 x 850 x 1150 1200 x 850 x 1500 365 390

Compressor system S 10- to S 29-2-
Duplex system S 10-…D to S 15-…D
Motor range: 7.5 – 22 kW, 10 – 30 HP
Compressor system S-
Screw compressor
mounted on horizontal receiver
Duplex system S-…D

2 screw compressors

BOGE Receiver Max. Effective free Motor Receiver BOGE Dimensions Weight
Model volume pressure air delivery* power options Model WxDxH
Litres bar psig m3/min cfm kW HP Litres mm kg
S 10- 270 8 115 1.18 42 7.5 10 350. 500. 750 S 10- to S 15-
10 150 1.06 39 7.5 10 350. 500. 750 super-silenced from 1650 x 790 x 1520 325
S 10- 250 13 190 0.91 32 7.5 10 350. 500. 750 to 2000 x 935 x 1760 470
S 15- 350 8 115 1.65 58 11.0 15 500. 750 ultra-silenced from 1650 x 790 x 1750 340
10 150 1.45 51 11.0 15 500. 750 to 2000 x 935 x 1990 485
13 190 1.25 44 11.0 15 500. 750
S 20-2- 750 8 115 2.57 91 15.0 20 S 20-2- to S 29-2-
10 150 2.24 80 15.0 20 super-silenced from 2000 x 950 x 1950 600
13 190 1.90 67 15.0 20 to 2000 x 950 x 1950 615
S 24-2- 750 8 115 3.05 108 18.5 25 ultra-silenced from 2000 x 950 x 2300 625
10 150 2.66 94 18.5 25 to 2000 x 950 x 2300 640
13 190 2.26 80 18.5 25
S 29-2- 750 8 115 3.45 122 22.0 30
10 150 3.11 110 22.0 30
13 190 2.57 91 22.0 30
BOGE Receiver Max. Effective free air Motor BOGE Dimensions Weight
Model volume pressure delivery* power Model WxDxH
Litres bar psig m3/min cfm kW HP mm kg
S 10-…D 750 8 115 2 x 1.18 2 x 42 2 x 7.5 2 x 10 S 10-…D to S 15-…D
10 150 2 x 1.06 2 x 39 2 x 7.5 2 x 10 super-silenced from 2220 x 820 x 1750 325
13 190 2 x 0.91 2 x 32 2 x 7.5 2 x 10 to 2220 x 820 x 1750 470
S 15-…D 750 8 115 2 x 1.65 2 x 58 2 x 11.0 2 x 15 ultra-silenced from 1650 x 790 x 1750 340
10 150 2 x 1.45 2 x 51 2 x 11.0 2 x 15 to 1650 x 790 x 1750 485
13 190 2 x 1.25 2 x 44 2 x 11.0 2 x 15

Compressed air station SD 10 to SD 15
Compressed air centre SD 10- to SD 29-2-
Motor range: 7.5 – 22 kW, 10 – 30 HP
Compressed air station SD

Screw compressor
with integral refrigerant dryer
Compressed air centre SD-

Screw compressor
with refrigerant dryer

BOGE Effective free air Motor BOGE Dimensions Weight
Max. pressure**
Model delivery* power Model WxDxH
3
bar psig m /min cfm kW HP mm kg
SD 10 8 115 1.18 42 7.5 10 SD 10 to SD 15
10 150 1.06 39 7.5 10 super-silenced 975 x 700 x 1265 260
13 190 0.91 32 7.5 10 ultra-silenced 975 x 700 x 1495 275
SD 15 8 115 1.65 58 11.0 15
10 150 1.45 51 11.0 15
13 190 1.25 44 11.0 15
BOGE Receiver Max. Effective free Motor Receiver BOGE Dimensions Weight
Model volume pressure** air delivery* power options Model WxDxH
Litres bar psig m3/min cfm kW HP Litres mm kg
SD 10- 350 8 115 1.18 42 7.5 10 500. 750 SD 10- to SD 15-
10 150 1.06 39 7.5 10 500. 750 super-silenced from 1650 x 790 x 1550 400
13 190 0.91 32 7.5 10 500. 750 to 2000 x 935 x 1760 520
SD 15- 350 8 115 1.65 58 11.0 15 500. 750 ultra-silenced from 1650 x 790 x 1750 415
10 150 1.45 51 11.0 15 500. 750 to 2000 x 935 x 1990 535
13 190 1.25 44 11.0 15 500. 750
SD 20-2- 750 8 115 2.57 91 15.0 20 SD 20-2- to SD 29-2-
10 150 2.24 80 15.0 20 super-silenced from 2000 x 950 x 1950 670
13 190 1.90 67 15.0 20 to 2000 x 950 x 1950 695
SD 24-2- 750 8 115 3.05 108 18.5 25 ultra-silenced from 2000 x 950 x 2300 695
10 150 2.66 94 18.5 25 to 2000 x 950 x 2300 720
13 190 2.26 80 18.5 25
SD 29-2- 750 8 115 3.45 122 22.0 30
10 150 3.11 110 22.0 30
13 190 2.57 91 22.0 30

Screw compressor S 31-2 to S 341

Motor range: 22 – 250 kW, 30 – 340 HP
VALVE-LESS OIL CIRCUIT DECOUPLED UNIT EFFICIENCY CONTROL

The BOGE screw compressor is A sub-frame mounted on vibration The specially designed BOGE The BOGE FOCUS control is the
designed with a valve-less oil damping feet prevents transmission airend provides high output standard compressor control and
circuit eliminating the need for oil of structure borne sound. A rigid volumes at low energy provides numerous control and
stop or check valves. This function basic frame allows easy consumption – for reliable and monitoring features.
provides maximum operating transportation by lift truck energy efficient compressed air
safety. or stacker truck. supply.

BOGE Max. Effective free Motor power Dimensions1) Dimensions2) Com- Weight Weight
Model pressure air delivery* Main drive Fan silenced super-silenced pressed silenced super-
motor motor WxDxH WxDxH air silenced
bar psig m3/min cfm kW HP kW HP mm mm outlet kg kg
S 31-2 8 115 3.88 137 22 30 0.55 0.75 1620x 960x1450 1620x 960x1950 G 11/4 740 770
S 31-2 10 150 3.30 117 22 30 0.55 0.75 1620x 960x1450 1620x 960x1950 G 11/4 740 770
S 31-2 13 190 2.67 94 22 30 0.55 0.75 1620x 960x1450 1620x 960x1950 G 11/4 740 770
S 40-2 8 115 5.17 183 30 40 1.10 1.50 1620x 960x1450 1620x 960x1950 G 11/4 740 770
S 40-2 10 150 4.63 164 30 40 1.10 1.50 1620x 960x1450 1620x 960x1950 G 11/4 740 770
S 40-2 13 190 3.82 135 30 40 1.10 1.50 1620x 960x1450 1620x 960x1950 G 11/4 740 770
S 50-2 8 115 6.35 225 37 50 1.10 1.50 1620x 960x1450 1620x 960x1950 G 11/4 760 790
S 50-2 10 150 5.78 204 37 50 1.10 1.50 1620x 960x1450 1620x 960x1950 G 11/4 760 790
S 50-2 13 190 4.95 175 37 50 1.10 1.50 1620x 960x1450 1620x 960x1950 G 11/4 760 790
S 60-2 8 115 7.00 247 45 60 1.10 1.50 1620x 960x1450 1620x 960x1950 G 11/4 840 870
S 60-2 10 150 6.34 224 45 60 1.10 1.50 1620x 960x1450 1620x 960x1950 G 11/4 840 870
S 60-2 13 190 5.36 190 45 60 1.10 1.50 1620x 960x1450 1620x 960x1950 G 11/4 840 870
S 61-2 8 115 7.70 272 45 60 1.50 2.00 2000x1065x1450 2000x1065x1950 G 11/2 1100 1150
S 61-2 10 150 6.92 244 45 60 1.50 2.00 2000x1065x1450 2000x1065x1950 G 11/2 1100 1150
S 61-2 13 190 5.87 207 45 60 1.50 2.00 2000x1065x1450 2000x1065x1950 G 11/2 1100 1150
S 75-2 8 115 9.33 329 55 75 2.20 3.00 2000x1065x1450 2000x1065x1950 G 11/2 1180 1230
S 75-2 10 150 8.30 293 55 75 2.20 3.00 2000x1065x1450 2000x1065x1950 G 11/2 1180 1230
S 75-2 13 190 7.11 251 55 75 2.20 3.00 2000x1065x1450 2000x1065x1950 G 11/2 1180 1230
S 90-2 8 115 10.80 381 65 90 2.20 3.00 2000x1065x1450 2000x1065x1950 G 11/2 1250 1300
S 90-2 10 150 9.65 341 65 90 2.20 3.00 2000x1065x1450 2000x1065x1950 G 11/2 1250 1300
S 90-2 13 190 8.45 298 65 90 2.20 3.00 2000x1065x1450 2000x1065x1950 G 11/2 1250 1300
S 100-2 8 115 12.10 428 75 100 2.20 3.00 2000x1065x1450 2000x1065x1950 G 11/2 1140 1190
S 100-2 10 150 10.50 371 75 100 2.20 3.00 2000x1065x1450 2000x1065x1950 G 11/2 1140 1190
S 100-2 13 190 9.20 325 75 100 2.20 3.00 2000x1065x1450 2000x1065x1950 G 11/2 1140 1190
S 101 8 115 13.10 465 75 100 2.20 3.00 2365x1335x1750 2365x1335x2250 G 21/2 1960 2020
S 101 10 150 11.40 405 75 100 2.20 3.00 2365x1335x1750 2365x1335x2250 G 21/2 1960 2020
S 101 13 190 9.80 350 75 100 2.20 3.00 2365x1335x1750 2365x1335x2250 G 21/2 1960 2020
S 125 8 115 15.70 555 90 125 4.00 5.50 2365x1335x1750 2365x1335x2250 G 21/2 1980 2040
S 125 10 150 13.70 485 90 125 4.00 5.50 2365x1335x1750 2365x1335x2250 G 21/2 1980 2040
S 125 13 190 12.00 425 90 125 4.00 5.50 2365x1335x1750 2365x1335x2250 G 21/2 1980 2040
S 150 8 115 18.40 650 110 150 4.00 5.50 2365x1335x1750 2365x1335x2250 G 21/2 2040 2100
S 150 10 150 16.30 575 110 150 4.00 5.50 2365x1335x1750 2365x1335x2250 G 21/2 2040 2100
S 150 13 190 14.20 505 110 150 4.00 5.50 2365x1335x1750 2365x1335x2250 G 21/2 2040 2100
S 151 8 115 19.40 685 110 150 4.00 5.50 2265x1585x2005 2565x1585x2505 DN 80 3100 3200
S 151 10 150 17.00 600 110 150 4.00 5.50 2265x1585x2005 2565x1585x2505 DN 80 3100 3200
S 151 13 190 14.40 508 110 150 4.00 5.50 2265x1585x2005 2565x1585x2505 DN 80 3100 3200
S 180 8 115 23.30 825 132 180 4.00 5.50 2265x1585x2005 2565x1585x2505 DN 80 3400 3500
S 180 10 150 20.80 735 132 180 4.00 5.50 2265x1585x2005 2565x1585x2505 DN 80 3400 3500
S 180 13 190 17.80 630 132 180 4.00 5.50 2265x1585x2005 2565x1585x2505 DN 80 3400 3500
S 220 8 115 27.90 990 160 220 4.00 5.50 2265x1585x2005 2565x1585x2505 DN 80 3400 3500
S 220 10 150 25.10 890 160 220 4.00 5.50 2265x1585x2005 2565x1585x2505 DN 80 3400 3500
S 220 13 190 21.70 770 160 220 4.00 5.50 2265x1585x2005 2565x1585x2505 DN 80 3400 3500
S 271 8 115 34.70 1225 200 270 5.50 7.50 3100x1910x2145 3500x1910x2645 DN 100 4500 4600
S 271 10 150 30.50 1077 200 270 5.50 7.50 3100x1910x2145 3500x1910x2645 DN 100 4500 4600
S 271 13 190 24.70 872 200 270 5.50 7.50 3100x1910x2145 3500x1910x2645 DN 100 4500 4600
S 341 8 115 40.80 1441 250 340 7.50 10.00 3100x1910x2145 3500x1910x2645 DN 100 5000 5100
S 341 10 150 37.10 1310 250 340 7.50 10.00 3100x1910x2145 3500x1910x2645 DN 100 5000 5100
S 341 13 190 31.70 1119 250 340 7.50 10.00 3100x1910x2145 3500x1910x2645 DN 100 5000 5100
1)
Super-silenced at the intake end
2)
Super-silenced at the intake end and discharge end

Compressed air station SD 40-2 to SD 150
Motor range: 30 – 110 kW, 40 – 150 HP
REFRIGERANT DRYERS CYCLONE SEPARATOR INTERNAL PIPEWORK OPERATOR PANEL AND

The frame mounted refrigerant A cyclone separator with electronic All oil carrying pipes are made of CONTROL
dryer has a pressure dew point of loss free condensate drain is steel terminating with high quality The dryer controls are clearly
+3°C (DIN ISO 7183) and simply positioned before the dryer to precision threaded joints that are visible on the compressor control
drops into the top of the screw remove any condensate before it leak proof and safe even under the panel. The BOGE FOCUS control
compressor cabinet enabling enters the dryer. highest pressures. The entire which offers numerous monitoring
simple maintenance or removal if machine utilises only one hose on and control features, comes as
ever necessary. the clean air side which also serves standard.
for vibration damping.

This is how compact compressed air can be: Standard S series components
along with a refrigerant dryer are assembled into one standalone package
reducing footprint size and eliminating installation costs. Flexibility doesn’t
end there: a dryer bypass is provided in the scope of delivery that allows
for direct connection of the compressor to the compressed air network.
BOGE Max. Effective free Motor power Dimensions Dimensions Com- Weight Weight
Model pressure** air delivery* Main drive Fan silenced super-silenced pressed silenced super-
SD 40-2 8 115 5.17 183 30 40 1.1 1.5 1620x 960x1665 1620x 960x1950 G 11/4 835 865
10 150 4.63 163 30 40 1.1 1.5 1620x 960x1665 1620x 960x1950 G 11/4 835 865
13 190 3.83 135 30 40 1.1 1.5 1620x 960x1665 1620x 960x1950 G 11/4 835 865
SD 50-2 8 115 6.35 224 37 50 1.1 1.5 1620x 960x1665 1620x 960x1950 G 11/4 870 900
10 150 5.78 204 37 50 1.1 1.5 1620x 960x1665 1620x 960x1950 G 11/4 870 900
13 190 4.95 175 37 50 1.1 1.5 1620x 960x1665 1620x 960x1950 G 11/4 870 900
SD 60-2 8 115 7.00 247 45 60 1.1 1.5 1620x 960x1665 1620x 960x1950 G 11/4 950 980
10 150 6.34 224 45 60 1.1 1.5 1620x 960x1665 1620x 960x1950 G 11/4 950 980
13 190 5.36 189 45 60 1.1 1.5 1620x 960x1665 1620x 960x1950 G 11/4 950 980
SD 61-2 8 115 7.70 272 45 60 1.5 2.0 2000x1065x1910 2000x1065x1950 G 11/2 1250 1300
10 150 6.92 244 45 60 1.5 2.0 2000x1065x1910 2000x1065x1950 G 11/2 1250 1300
13 190 5.87 207 45 60 1.5 2.0 2000x1065x1910 2000x1065x1950 G 11/2 1250 1300
SD 75-2 8 115 9.33 329 55 75 2.2 3.0 2000x1065x1910 2000x1065x1950 G 11/2 1350 1400
10 150 8.30 293 55 75 2.2 3.0 2000x1065x1910 2000x1065x1950 G 11/2 1350 1400
13 190 7.11 251 55 75 2.2 3.0 2000x1065x1910 2000x1065x1950 G 11/2 1350 1400
SD 90-2 8 115 10.80 381 65 90 2.2 3.0 2000x1065x1910 2000x1065x1950 G 11/2 1425 1475
10 150 9.65 341 65 90 2.2 3.0 2000x1065x1910 2000x1065x1950 G 11/2 1425 1475
13 190 9.20 325 65 90 2.2 3.0 2000x1065x1910 2000x1065x1950 G 11/2 1425 1475
SD 100-2 8 115 12.10 428 75 100 2.2 3.0 2000x1065x1910 2000x1065x1950 G 11/2 1335 1385
10 150 10.50 371 75 100 2.2 3.0 2000x1065x1910 2000x1065x1950 G 11/2 1335 1385
13 190 9.20 325 75 100 2.2 3.0 2000x1065x1910 2000x1065x1950 G 11/2 1335 1385
SD 101 8 115 13.10 463 75 100 2.2 3.0 2365x1335x2153 2365x1335x2250 G 21/2 2135 2195
10 150 11.40 403 75 100 2.2 3.0 2365x1335x2153 2365x1335x2250 G 21/2 2135 2195
13 190 9.80 346 75 100 2.2 3.0 2365x1335x2153 2365x1335x2250 G 21/2 2135 2195
SD 125 8 115 15.70 554 90 125 4.0 5.5 2365x1335x2153 2365x1335x2250 G 21/2 2155 2215
10 150 13.70 484 90 125 4.0 5.5 2365x1335x2153 2365x1335x2250 G 21/2 2155 2215
13 190 12.00 424 90 125 4.0 5.5 2365x1335x2153 2365x1335x2250 G 21/2 2155 2215
SD 150 8 115 18.40 650 110 150 4.0 5.5 2365x1335x2153 2365x1335x2250 G 21/2 2220 2280
10 150 16.30 576 110 150 4.0 5.5 2365x1335x2153 2365x1335x2250 G 21/2 2220 2280
13 190 14.20 501 110 150 4.0 5.5 2365x1335x2153 2365x1335x2250 G 21/2 2220 2280

Screw compressor SL 270 to SL 481
Effective free air delivery: 33 – 43.7 m³/min, 1166 – 1544 cfm

Motor range: 200 – 355 kW, 270 – 480 HP
EFFICIENCY INTERNAL PIPEWORK VALVE-LESS OIL CIRCUIT CONTROL

The specially designed BOGE All oil carrying pipes are made of The BOGE screw compressor is The BOGE FOCUS control is the
airend provides high output steel terminating with high quality designed with a valve-less oil standard compressor control and
volumes at low energy precision threaded joints that are circuit eliminating the need for oil provides numerous control and
consumption – for reliable and leak proof and safe even under the stop or check valves. This function monitoring features.
energy efficient compressed air highest pressures. The entire provides maximum operating
supply. machine utilises only one hose on safety.
the clean air side which also serves
for vibration damping.

Larger volumes of compressed air: The SL series screw compressors are
designed for reliability and efficiency when producing large volumes of
compressed air.
BOGE Max. Effective free Motor power Dimensions Dimensions Com- Weight Weight
Model pressure air delivery* Main drive Fan silenced super-silenced pressed silenced super-
SL 270 8 115 33.3 1177 200 270 5.5 7.5 3100x1910x2145 3100x1910x2645 DN 100 3900 4000
SL 340 10 150 33.2 1173 250 340 7.5 10.0 3100x1910x2145 3100x1910x2645 DN 100 4500 4600
SL 340 13 190 33.0 1166 250 340 7.5 10.0 3100x1910x2145 3100x1910x2645 DN 100 4500 4600
SL 341 8 115 43.7 1544 250 340 7.5 10.0 3100x1910x2145 3100x1910x2645 DN 100 5000 5100
SL 431 10 150 43.4 1533 315 430 7.5 10.0 3100x1910x2145 3100x1910x2645 DN 100 5000 5100
SL 481 13 190 42.7 1508 355 480 7.5 10.0 3100x1910x2145 3500x1910x2645 DN 100 5600 5700

Screw compressor SF 15 to SF 29-2
Compressed air station SDF 15
SF 15 to SF 29-2 SDF 15
FREQUENCY CONTROL INTERNAL PIPEWORK ENERGY SAVING CONTROL

The frequency converter ensures a All oil carrying pipes are made of Tighter/reduced system pressure The BOGE FOCUS control is the
continuous volume flow between steel terminating with high quality virtually eliminates off load running, standard compressor control and
25 and 100 percent automatically precision threaded joints that are and in turn reduces start-up provides numerous control and
adapting to the momentary leak proof and safe even under the current peaks, and contributes to monitoring features.
demand of the compressed air highest pressures. The entire potential energy savings of up to
system. Soft starting also avoids machine utilises only one hose on 40%
undue wear and tear and prolongs the clean air side which also serves
the service life of the compressor. for vibration damping.

Advantage through distinctly reduced energy consumption: The integrated
frequency control of the SF series reduces idling times and eliminates
pressure fluctuations. Using less compressed air means using less energy
because the volume flow is continuously adapted to demand. Soft starting also
avoids undue wear and tear and prolongs the service life of the compressor.
BOGE Max. pressure Effective free air delivery* Motor power Dimensions Weight
Model WxDxH
SF 15 8 115 0.49-1.65 17- 58 11.0 15 940 x 700 x 1180 255
10 150 0.39-1.45 14- 51 11.0 15 940 x 700 x 1180 255
13 190 0.39-1.25 14- 44 11.0 15 940 x 700 x 1180 255
SF 24-2 8 115 0.85-3.05 30-108 18.5 25 1200 x 850 x 1403 337
10 150 0.63-2.66 22- 94 18.5 25 1200 x 850 x 1403 337
13 190 0.44-2.26 16- 80 18.5 25 1200 x 850 x 1403 337
SF 29-2 8 115 1.02-3.45 36-122 22.0 30 1200 x 850 x 1403 387
10 150 0.88-3.11 31-110 22.0 30 1200 x 850 x 1403 387
13 190 0.71-2.57 25- 91 22.0 30 1200 x 850 x 1403 387
* Free air delivery for the complete package in accordance with ISO 1217, Appendix E, at 20ºC ambient temperature and maximum pressure. Emitted sound pressure values from 72 dB(A) according
BOGE Max. pressure** Effective free air delivery* Motor power Dimensions Weight
Model WxDxH
SDF 15 8 115 0.49-1.65 17- 58 11.0 15 975 x 700 x 1470 295
10 150 0.39-1.45 14- 51 11.0 15 975 x 700 x 1470 295
13 190 0.39-1.25 14- 44 11.0 15 975 x 700 x 1470 295

Screw compressor SF 60-2 to SF 150
Compressed air station SDF 60-2 to SDF 150
Motor range: 45 – 110 kW, 60 – 150 HP
SF 60-2 to SF 150 SDF 60-2 to SDF 150
FREQUENCY CONTROL REFRIGERANT COMPRESSED ENERGY SAVING CONTROL

The frequency converter ensures a AIR DRYERS Tighter/reduced system pressure The BOGE FOCUS control is the
continuous volume flow between The frame mounted refrigerant virtually eliminates off load running, standard compressor control and
25 and 100 percent automatically dryer has a pressure dew point of in turn reduces start-up current provides numerous control and
adapting to the momentary +3°C (DIN ISO 7183) and simply peaks, and contributes to potential monitoring features.
demand of the compressed air drops into the top of the screw energy savings of up to 40 %
system. Soft starting also avoids compressor cabinet enabling
undue wear and tear and prolongs simple maintenance or removal if
the service life of the compressor. ever necessary.

For maximised efficiency and air delivery: This range of screw compressors
is ideal for the efficient operation of larger volumes of air. The integrated
frequency converter ensures a continuous volume flow between 25 and
100 percent by automatically adapting to the momentary demand of the
compressed air system – an advantage with big pay back due to distinctly
reduced energy costs.
BOGE Max. Effective free air Motor power Dimensions Dimensions Com- Weight Weight
Model pressure delivery* Main drive Fan silenced super-silenced pressed silenced super-
SF 60-2 8 115 1.75- 7.00 62-247 45 60 1.1 1.5 1620x 960x1450 1620x 960x1950 G 11/4 885 915
10 150 1.58- 6.34 56-224 45 60 1.1 1.5 1620x 960x1450 1620x 960x1950 G 11/4 885 915
13 190 1.34- 5.36 47-189 45 60 1.1 1.5 1620x 960x1450 1620x 960x1950 G 11/4 885 915
SF 100-2 8 115 3.02-12.10 106-428 75 100 2.2 3.0 2000x1065x1450 2000x1065x1950 G 11/2 1350 1400
10 150 2.62-10.50 93-371 75 100 2.2 3.0 2000x1065x1450 2000x1065x1950 G 11/2 1350 1400
13 190 2.30- 9.20 81-325 75 100 2.2 3.0 2000x1065x1450 2000x1065x1950 G 11/2 1350 1400
SF 150 8 115 4.60-18.40 163-650 110 150 4.0 5.5 2365x1335x1750 2365x1335x2250 G 21/2 2200 2260
10 150 4.08-16.30 144-575 110 150 4.0 5.5 2365x1335x1750 2365x1335x2250 G 21/2 2200 2260
13 190 3.55-14.20 125-505 110 150 4.0 5.5 2365x1335x1750 2365x1335x2250 G 21/2 2200 2260
BOGE Max. Effective free air Motor power Dimensions Dimensions Com- Weight Weight
Model pressure** delivery* Main drive Fan silenced super-silenced pressed silenced super-
1
SDF 60-2 8 115 1.75- 7.00 62-247 45 60 1.1 1.5 1620x 960x1665 1620x 960x1950 G 1 /4 1005 1035
10 150 1.58- 6.34 56-224 45 60 1.1 1.5 1620x 960x1665 1620x 960x1950 G 11/4 1005 1035
13 190 1.34- 5.36 47-189 45 60 1.1 1.5 1620x 960x1665 1620x 960x1950 G 11/4 1005 1035
SDF 100-2 8 115 3.02-12.10 106-428 75 100 2.2 3.0 2000x1065x1910 2000x1065x1950 G 11/2 2170 2230
1
10 150 2.32-10.50 93-371 75 100 2.2 3.0 2000x1065x1910 2000x1065x1950 G 1 /2 2170 2230
13 190 2.00- 9.20 81-325 75 100 2.2 3.0 2000x1065x1910 2000x1065x1950 G 11/2 2170 2230
SDF 150 8 115 4.60-18.40 163-650 110 150 4.0 5.5 2365x1315x1755 2365x1315x2255 G 21/2 2400 2460
10 150 4.08-16.30 144-575 110 150 4.0 5.5 2365x1315x1755 2365x1315x2255 G 21/2 2400 2460
13 190 3.55-14.20 125-505 110 150 4.0 5.5 2365x1315x1755 2365x1315x2255 G 21/2 2400 2460

Screw compressor SLF 30 to SLF 271
Compressed air station SLDF 30 and SLDF 40
Motor range: 22 – 200 kW, 30 – 270 HP
SLF 30 (optionally with radial fan) SLDF 30 (optionally with radial fan)
FREQUENCY CONTROL MAXIMUM EFFICIENCY REFRIGERANT COMPRESSED CONTROL

The frequency converter ensures a The specially designed BOGE AIR DRYERS The BOGE FOCUS control is the
continuous volume flow between 25 airend provides high output volumes The frame mounted refrigerant standard compressor control and
and 100 percent automatically at low energy consumption – for dryer has a pressure dew point of provides numerous control and
adapting to the momentary demand reliable and energy efficient +3°C (DIN ISO 7183) and simply monitoring features.
of the compressed air system. The compressed air supply. Tighter/ drops into the top of the screw
soft starting also avoids undue wear reduced system pressure virtually compressor cabinet enabling
and tear and prolongs the service eliminates off load running, which in simple maintenance or removal if
life of the compressor. turn reduces start-up current peaks, ever necessary.
and contributes to potential energy
savings of up to 40 %
Best specific working point: When frequency controlled the CLF series
compressors automatically adjust to the air demand whilst controlling
the pressure perfectly. In the event of a change of the pressure value, the
output automatically adjusts. A 13 bar machine thus regulated to an 8 bar
machine yields a correspondingly higher output – without any expensive
remodelling or design related modifications.
BOGE Max. Effective free air Motor Dimensions Dimensions Com- Weight Weight
Model pressure delivery* power silenced super-silenced/ pressed silenced/ super-
with radial fan air with radial fan silenced
bar psig m3/min cfm kW HP W x D x H in mm W x D x H in mm outlet kg kg
SLF 30 8 115 1.06- 3.87 37- 137 22 30 1830 x 966 x 1444 1830 x 966 x 1944 G 11/4 700/730 730
10 150 1.06- 3.30 37- 117 22 30 1830 x 966 x 1444 1830 x 966 x 1944 G 11/4 700/730 730
13 190 1.06- 2.68 37- 95 22 30 1830 x 966 x 1444 1830 x 966 x 1944 G 11/4 700/730 730
SLF 40 8 115 1.06- 5.05 37- 178 30 40 1830 x 966 x 1444 1830 x 966 x 1944 G 11/4 770/805 810
10 150 1.06- 4.53 37- 160 30 40 1830 x 966 x 1444 1830 x 966 x 1944 G 11/4 770/805 810
13 190 1.06- 3.82 37- 135 30 40 1830 x 966 x 1444 1830 x 966 x 1944 G 11/4 770/805 810
1
SLF 51 8 115 1.51- 6.71 53- 237 37 50 2040 x 1090 x 1450 2040 x 1090 x 1950/2060 G 1 /4 1020/1070 1070
10 150 1.47- 6.04 52- 213 37 50 2040 x 1090 x 1450 2040 x 1090 x 1950/2060 G 11/4 1020/1070 1070
13 190 1.37- 4.98 48- 176 37 50 2040 x 1090 x 1450 2040 x 1090 x 1950/2060 G 11/4 1020/1070 1070
1
SLF 61 8 115 1.55- 7.87 55- 278 45 60 2040 x 1090 x 1450 2040 x 1090 x 1950/2060 G 1 /2 1150/1200 1200
10 150 1.51- 6.92 53- 244 45 60 2040 x 1090 x 1450 2040 x 1090 x 1950/2060 G 11/2 1150/1200 1200
13 190 1.42- 5.90 50- 208 45 60 2040 x 1090 x 1450 2040 x 1090 x 1950/2060 G 11/2 1150/1200 1200
SLF 75 8 115 1.55- 9.33 55- 329 55 75 2040 x 1090 x 1450 2040 x 1090 x 1950/2060 G 11/2 1270/1320 1320
1
10 150 1.51- 8.40 53- 297 55 75 2040 x 1090 x 1450 2040 x 1090 x 1950/2060 G 1 /2 1270/1320 1320
13 190 1.46- 7.26 52- 256 55 75 2040 x 1090 x 1450 2040 x 1090 x 1950/2060 G 11/2 1270/1320 1320
SLF 101 8 115 4.22-13.64 149- 482 75 100 2415 x 1335 x 1750 2415 x 1335 x 2250 G 21/2 2200/ – 2260
10 150 4.16-12.33 147- 435 75 100 2415 x 1335 x 1750 2415 x 1335 x 2250 G 21/2 2200/ – 2260
13 190 4.00-10.58 141- 374 75 100 2415 x 1335 x 1750 2415 x 1335 x 2250 G 21/2 2200/ – 2260
1
SLF 125 8 115 4.22-15.70 149- 554 90 125 2415 x 1335 x 1750 2415 x 1335 x 2250 G 2 /2 2250/ – 2310
10 150 4.16-14.36 147- 507 90 125 2415 x 1335 x 1750 2415 x 1335 x 2250 G 21/2 2250/ – 2310
13 190 4.00-12.56 141- 443 90 125 2415 x 1335 x 1750 2415 x 1335 x 2250 G 21/2 2250/ – 2310
SLF 221 8 115 6.46-28.21 228- 996 160 220 3145 x 1910 x 2145 3145 x 1910 x 2645 DN 100 4500/ – 4600
10 150 6.18-25.06 218- 885 160 220 3145 x 1910 x 2145 3145 x 1910 x 2645 DN 100 4500/ – 4600
13 190 5.46-20.36 193- 719 160 220 3145 x 1910 x 2145 3145 x 1910 x 2645 DN 100 4500/ – 4600
SLF 271 8 115 6.46-34.70 228-1225 200 270 3145 x 1910 x 2145 3145 x 1910 x 2645 DN 100 4700/ – 4800
10 150 6.18-30.50 218-1077 200 270 3145 x 1910 x 2145 3145 x 1910 x 2645 DN 100 4700/ – 4800
13 190 5.46-24.73 193- 873 200 270 3145 x 1910 x 2145 3145 x 1910 x 2645 DN 100 4700/ – 4800
BOGE Max. Effective free air Motor Dimensions Dimensions Com- Weight Weight
Model pressure** delivery* power silenced super-silenced/ pressed silenced/ super-
with radial fan air with radial fan silenced
bar psig m3/min cfm kW HP W x D x H in mm W x D x H in mm outlet kg kg
SLDF 30 8 115 1.06-3.87 37-137 22 30 1830 x 966 x 1664 1830 x 966 x 1944 G 11/4 785/ – 815
10 150 1.06-3.30 37-117 22 30 1830 x 966 x 1664 1830 x 966 x 1944 G 11/4 785/ – 815
13 190 1.06-2.68 37- 95 22 30 1830 x 966 x 1664 1830 x 966 x 1944 G 11/4 785/ – 815
SLDF 40 8 115 1.06-5.05 37-178 30 40 1830 x 966 x 1664 1830 x 966 x 1944 G 11/4 855/ – 895
10 150 1.06-4.53 37-160 30 40 1830 x 966 x 1664 1830 x 966 x 1944 G 11/4 855/ – 895
1
13 190 1.06-3.82 37-135 30 40 1830 x 966 x 1664 1830 x 966 x 1944 G 1 /4 855/ – 895

READY FOR ACTION WORLDWIDE:
BOGE Service Support – Worldwide
SERVICE
Service / Maintenance Extended Warranty Comprehensive Service Cover
Service support solutions including Extension of your factory warranty up to The comprehensive “cair” package
contracts covering repair and even 5 years (e.g. with BOGE bestcair): includes a guaranteed reaction time
warranty extension. Routine maintenance for total security and back-up within the warranty period.
according to our flat rate service plan as (see overleaf for more details).
well as inspection and breakdown cover.
Maintenance & Repair Commissioning 24 Hour Helpline

Options include; long-term fixed cost Connection and adjustment of all Emergency helpline for trouble
maintenance plans, a flat rate for all equipment at your facility: a fast shooting and technical support:
types of service and spare parts with and dependable service delivered available any time around the clock!
a possible warranty extension up to by qualified BOGE service technicians.
10 years. Full installation on request.
A comprehensive service plan created to satisfy your individual requirements:

COMPRESSED
e.g. taking responsibility for the compressed air station at your facility including complete plant
AIR FLAT RATE
management for a monthly flat rate irrespective of hours of operation (energy costs not included).
FLEXIBLE SERVICE
This BOGE service programme has been developed to adapt to each customer’s unique requirements.
It is our objective to create a tailor-made BOGE service package covering inspection, service,
breakdown, with customised warranty arrangements as well as complete all-in service contracts.
Please contact us to help you determine the type of service best suited to meet your needs:
Just email us at service@boge.de – our service specialists will be in touch with you shortly!

Service your added value! Maximised reliability and economic
efficiency are not the only technical advantages that BOGE has
to offer. Our comprehensive service support program will ensure
your BOGE compressed air system remains in tip top condition.
Wherever you need us, whatever we can do for you: BOGE Service
Support is always readily available close by – competent, to the
highest standards, and always one step ahead.
BOGE BESTCAIR BOGE GENUINE PARTS ALWAYS NEARBY

BOGE bestcair enables you to extend your Only original BOGE spare parts have the BOGE has a network of dedicated service
factory warranty up to 5 years: 2 years factory manufacturer’s technological edge. You can be technicians and certified partners at its disposal
warranty with 3 years additional bestcair confident when opting for BOGE original spare to help you worldwide with your installation,
warranty – the choice is yours. Furthermore, parts in the service of your BOGE compressed upgrading, commissioning or approval,
cairplan ensures manufacturer’s recommended air system will ensure that the integrity of the maintenance, repair, or inspection:
maintenance schedule of new and existing compressor is maintained, efficiency is retained You can rely on the know-how and experience
equipment at the specified service intervals. and your peace of mind is sustained. of our qualified experts – at all times.
For more information email Hotline Mobile Service: +49 5206 601-130
bestcair@boge.com
C E R T I F I E D
24-h
SERVICE TECHNICIAN
EMERGENCY ASSISTANCE AIR AUDITS TRAINING COURSES

In the case of an emergency where immediate By analysing your existing compressed air The BOGE Compressed Air College was
technical support is required, the BOGE product system, our energy efficiency experts can established in order to train and certify internal
support trouble shooters or the BOGE Helpline identify where savings can be made. The employees and external partners as qualified
team are available to you 24/7. BOGE AIReport includes measurement of: BOGE Service Technicians. Attendance of training
Product Support Hotline: dew point control, vibration control, leakage, courses held in the in-house training centre
+49 5206 601-140 noise, oil check and TAN check. further assist in refreshing existing BOGE Service
BOGE Helpline: +49 170 4400444 Technician’s knowledge at regular intervals.
For four generations, customers from mechanical engineering, industry and trade have
relied on BOGE know-how when it comes to planning, developing and manufacturing
compressed air systems. They are fully aware of the fact that BOGE AIR is more than just
ordinary compressed air: utmost safety, outstanding efficiency, excellent quality, maximised
flexibility along with dependable service are the ingredients to transform BOGE AIR into air
to work with – in Germany, in Europe and in more than 80 countries around the world.
Our ranges of services include the following:

• Energy efficient systems development
• Plant design and engineering
• System control and visualisation
• Oil-free piston, screw and turbo compressors
• Oil injected screw compressors
and oil lubricated piston compressors
• Compressed air treatment
• Compressed air distribution and storage
• Compressed air accessories
• Compressed air service
302-GB-5-08.2010/T · Technical changes and errors reserved.
BOGE KOMPRESSOREN
Otto Boge GmbH & Co. KG
P.O. Box 10 07 13 · 33507 Bielefeld
Otto-Boge-Straße 1–7 · 33739 Bielefeld
Fon +49 5206 601-0 · Fax +49 5206 601-200
info@boge.com · www.boge.com

Screw Compressors: Boge Air. The Air To Work

Uploaded by

Copyright:

Available Formats

Screw Compressors: Boge Air. The Air To Work

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Screw Compressors: Boge Air. The Air To Work

Uploaded by

Copyright:

Available Formats

What are BOGE screw compressors used for?

What are BOGE screw compressors used for?

How does the cooling system of BOGE screw compressors work?

How does the cooling system of BOGE screw compressors work?

BOGE AIR. THE AIR TO WORK.

For more than three decades BOGE screw compressors

BOGE AIR. THE AIR TO WORK.

4 BOGE AIR. THE AIR TO WORK.

THERMAL ADVANTAGE: THE BOGE COOLING AIR FLOW.

GRAVITY ADVANTAGE: THE BOGE OIL SEPARATION SYSTEM.

The heart of every BOGE screw compressor:

6 BOGE AIR. THE AIR TO WORK.

PREMIUM QUALITY MADE IN GERMANY

THE COMPRESSION PROCEDURE

8 BOGE AIR. THE AIR TO WORK.

INTELLIGENT SAVINGS output – without any expensive remodelling or

investment costs maintenance

Your BOGE advantage:

QUALITY PAYS OFF

10 BOGE AIR. THE AIR TO WORK.

German engineering Strict guidelines Permanent optimisation

Compressed air receiver Refrigerant dryer Frequency control

ADVANTAGES OF THE COMPACT MODULAR DESIGN:

12 BOGE AIR. THE AIR TO WORK.

PERFORMANCE OVERVIEW OF THE C SERIES

PERFORMANCE OVERVIEW OF THE S SERIES

Integrated oil separating system

Minimum pressure / Silenced intake filter with

BOGE airend with special BOGE

CNC machined cast iron housing

14 BOGE AIR. THE AIR TO WORK.

COMPACT DESIGN EXTREMELY QUIET HIGHEST EFFICIENCY

CONTROL OPTIONAL FREQUENCY CONTROL OPTIONAL REFRIGERATION DRYER

C Series Screw Compressors 15

Compressed air system CL-

Compressed air centre CLD-

16 BOGE AIR. THE AIR TO WORK.

C Series Screw Compressors 17

EFFICIENCY REFRIGERANT DRYER EXTREMELY QUIET CONTROL

18 BOGE AIR. THE AIR TO WORK.

C Series Screw Compressors 19

CLF 9 (super-silenced as option)

FREQUENCY CONTROL MAXIMUM EFFICIENCY REFRIGERANT DRYER CONTROL

20 BOGE AIR. THE AIR TO WORK.

C Series Screw Compressors 21

Multifunctional intake control with Silenced paper cartridge intake filter

Integrated airend with special BOGE profile

Effective oil pre-separation harnessing to the

Minimum pressure valve / check valve

22 BOGE AIR. THE AIR TO WORK.

INTEGRATED DESIGN COMPACT EFFICIENCY CONTROL

OPTIONAL REFRIGERANT DRYER OPTIONAL HEAT RECOVERY OPTIONAL FREQUENCY CONTROL

C Series Screw Compressors 23

Compressed air system CL-

Compressed air centre CLD-

24 BOGE AIR. THE AIR TO WORK.

C Series Screw Compressors 25

MAXIMUM EFFICIENCY EXTREMELY QUIET REFRIGERANT DRYERS CONTROL

26 BOGE AIR. THE AIR TO WORK.