SM-N9600 Confidential

SUB ANT 1
(LB/MB)
LMB DRX: B5/8/12/13/17/18/19/20/26/28/39
CA: B7/39/40
MIMO: B1/3/4/7/38/40/41/66 TRX1 TRX2 LNA_AUX2 LNA_AUX1

LB LFEM(SKY13716), 4.0 x 3.0

LNA_AUX1 LNA_LB_OUT1
B29 B8

LNA_OUT2

LNA_OUT1

LNA_AUX1

LNA_AUX2
DPX 202700DT-4162A1
2.0 x 1.25 B26/B5/B18/B19
B8

Mu lt i path
B20

SW
ANT

B26/B5/B18/B19 RFFE #2
X-GND B12/B13 LNA_AUX2 (PA&ASM)
Switch(MIPI)
B20 RFFE #3
B28A B12/B13
LNA_LB_OUT2
(LNA 38.4MHz)
B28B B28A
B28B
BGSA 132 MN10(SP3T) B29
1.1 x 1.5 HB_TX _CH1
ZT
MI PI RFFE #4(38.4MHz) Port Freq. Range MB_TX_CH1 LB_ANT
_ANT
RF_IN LB
TX_CH1_LTEU 5000-6000M
TX_CH1_UHB 3400-3800M
TX_CH1_HB1 LTE B7/30/38/40/41
MSEL -> VRF_DRX_MIPI_IO_1P8 RFFE #4(38.4MHz) TX_CH1_MB
TX_CH1_MB2
1700-2000M (all techs)
GSM HB
MAIN ANT 1-1
U2004 MI PI TX_CH1_LMB1
600-915 (all techs)
1400-1500M (W/LTE)
LB LPAMiD (SKY78160-51)
COUPLING_MHB
(LB/MB/HB)
TX_CH0_LB2 600-915 (all techs)

2G_IN
OMB LFEM(QDM3870), 4.0 x 3.0 TX_CH0_HB2 LTE B7/30/38/40/41 5.5 x 8.0 x 0.9 COUPLING_OUT LB:5/8/12/13/17/18/19/20/26/28
TX_CH0_HB1 LTE B7/40/41 Tx_B5/8/12/13/17/18/19/20/26/28_BC0 DEA162 690LT-505 1B1 MB:1/2/3/4/25/34/39/66
1880-2025M (GSM HB, 1.6 x 0.8
TX_CH0_MB2
TDD-LTE, TDSCDMA)
Tx_B7/38/40/41
HB CA: 7
1400-1500M (W/LTE,
TX_CH0_LMB
GSMLB/HB)
2G PA(SKY77365-11) TRX_ANT_LB
HB MIMO : 40
DRX_TR_IN _MI MO TX_CH0_MB1 1700-2000 (all techs) RFFE #2 3.0 x 3.5 x 0.9
Tx_GSM_1800/1900 (PA&ASM)
LNA_MHB_OUT1
Tx_GSM_850/900 DPX 202690DT- QAT
1
Tx_B1/2/3/4/25/34/39/66 4196J1K
2.0 x 1.25
3550
Ape rtu re
Tu ne r
DRX_TR_IN _LHB RFFE #6
COUPLING_OUT
LNA_MHB_OUT2 QAT351 6
GND pa th : r out e sid e b y sid e wit h F BRx inp ut 1.2 x 1.6
RFFE #6
OMH LPAMiD (AFEM-9090), NA 는 AFEM-9096
9.0 x 10.5 x 0.9

SDR845 OMH LPAMID

TRX2

TRX1

LN A_AU X_HB 1
B41 Direct mapp in g Phase sh ifter
Qco m to gu di e the Ph as e sh if ter va lu e ac co d
r i ng to Boa rd a nd Fil ter co nd it i on B41 B41: SAF RC2G59MA0F3K
B41 Rx Fil ter는 OMH LFEM AUX에서5mm 이내배치
1.4x1.1

B41
LN A_AU X_HB 2

ANT1 TRX_ANT1_MHB
LN A_AU X_M B3

B39
B39/41:SAWF D1G90AA0F3K
1.5x1.1 MIMO_B3/7/38/40/41 COUPLING_MHB

WiFi 1(5G) WiFi 2(5G)

Wifi Module(SWB-E30A) 7.6x8.8 CA_7/40/41
ANT2
TRX_ANT2_MHB
MIMO_B1/3/4/7/40/41
Rx_OUT_HB_Aux2 2.5 ~ 2.7GHz

CA_B3/4/7/39/40/41 4P4T LNA_OUT_HB_AUX2

MIMO_B1/3/4/39/40/66 RFFE #2
LOW
MAIN ANT 1-2
LNA_OUT_HB_AUX1
CHN/HK/Latin PRX_B5/8/12/13/17/18/19/20/26/28
U1004
Rx_OUT_HB_Aux 2.3 ~ 2.4GHz
(MB/HB)
사업자 Trial用
LNA_OUT_MB_MIM O2
CA_B5/8/12/13/17/20/28
B
Rx_OUT_MB_4Rx2
MB CA: B3
DEA165 500BT-220 8A1K MB MIMO: B1/3/4
1.6 x 0.8 x 0.65T
LTE-U ANT0 RFFE #4 PRX_B7/38/40/41 Rx_OUT_HB2
HB: B7/38/40/41
(38.4MHz) CA_B1/4/7/38/40/41 A
LNA_OUT_HB2
2
B1/B3

SUB ANT 2
VDD_1P8 VDD_1P2 VIO ID0 CLK DATA
BGSX 44MA12 LNA_OUT_MB_MIM O1
Rx_OUT_MB_4Rx1 Ape rtu re
GND 13 RF FE 2.0
PRX_B1/2/3/4/25/34/39/66 1.6 x 1.6 Tu ne r

CA_B1/2/3/4/7/39/40/66
(MB/HB) LTE-U ANT1
LNA_IN1 7
OUT_1A
OUT_1B

OUT_2A
HIGH Rx_OUT_HB1 QAT351 6
DRX: B1/2/3/4/7/25/34 LNA_IN2 4
OUT_2B

CA_B40 B
U1010 LNA_OUT_HB1 1.2 x 1.6
RFFE #6
38/39/40/41/66 DEA165 500BT-220 8A1K
1.6 x 0.8 x 0.65T
QLN205 0 MIMO_B1/3/4/7/40/41/66
1.95 x 2.0 x 0.62T
CA: B1/2/3/4/7/38/40/41 B
Rx_OUT_MB2
LTE-U LNA B7/38/40/41 LNA_OUT_MB2

DRX_B5/8/12/13/17/18/19/20/26/28 A Rx_OUT_MB1
CA_B5/8/12/13/17/20/28 LNA_OUT_MB1

TRX5
TRX3
TRX4
TRX1
B866 6

TRX2
BGSX 44MA12
1.7 x 1.3 GPS_LNA_EN 1.6 x 1.6

GPS_SUB2 close to
LPAMid

LNA_IN_B1/4/66_MIM O
LNA_IN_B25/3_MIM O
LNA_IN_B34

LNA_IN_HB_MIM O

LNA_IN_HB_Aux1

LNA_IN_HB_Aux2
BGU801 9W
1.1 x 0.9
SAF FB1G56KE0F3K
1.1 x 0.9
B34 SFHG17AA002
1.1 x 0.9
MAIN ANT 3
MSEL -> GND RFFE #4(38.4MHz)
(MB CA/MIMO)
MI PI
B1(66)
MB CA: B1/3/4/66
U2006 CA_B7/39 B3
S AKRR1G84AU0F3K
18x14 MB MIMO: B1/3/66
OMB LFEM(QDM3870), 4.0 x 3.0 MIMO_B1/3/4/7/38/40/41/66 B7

B40

A
LNA_MHB_OUT1

S FWG52DBB02
15x11

B40_MIM O MAIN ANT 4

B

DRX_ANT_MHB
LNA_MHB_OUT2
B7_MIM O
(HB CA/MIMO)
W_GRFC _1
W_GRFC _1
HB CA: B40
HB MIMO: B7//38/40/41
A
CA_B1/3/4/7/40/41
BGS12SN6
LNA_MHB_OUT3 1.1 x 0.7 BGS12SN6
1.1 x 0.7
B41_MIM O

B41: S AF RC2G59MA 0F3K

14x11
DRX_B7/38/40/41
CA_B1/4/7/38/40/41

DRX_B1/2/3/4/25/34/39/66
TRX2

TRX1

B41 Direct mapp in g Phase sh ifter B41: SAF RC2G59MA0F3K CA_1/2/3/4/39/40/66

Qco m to gu id e the Ph as e sh if ter va lu e ac co d
r i ng to Boa rd a nd Fil ter co nd it i on B41 1.4x1.1
B41 Rx Fil ter는 OMH LFEM AUX에서5mm 이내배치

[Splitting information]
B39 1. B2/3/7/41: E xt ernal S plit
2. LTE U/LNA: S DR 845
B34 LTEU/LAA: It’ s b est to sp li t o n SDRs in ce e LNA ca n be be t e ro ptim iz ed a t 5 to 6GHz. If y ou p la n to ke ep h
t e i nter stag e fi lt er
be twee n eL NAa nd SDR, the re sh ou ld n ot be o t o mu ch i nte rfe ren ce from WiF i 2.4GHz.

For B41, thi s ba nd is s ufferin g from WiF i 2.4GHz i nterfere nc e, i t’ s be st to sp li t o n eL NA. The i so la tio n be twe en h
t e two e LNA
ou tpu ts wi l l mi ni mi ze the B41de se ns e du e to Wi Fi 2.4GHz j amm er.
 SIM/T_FLASH_DET
UFS_TX_D0/1_P/N
UFS_RX_D0/1_P/N
UFS
SIM1_RST, CLK UFS_REFCLK KLUDG4U1EA-B0C1

SAMSUNG
T_FLASH_CMD/CLK UFS_RST
A3LSMN960U T_FLASH_DATA
SUB_CAM_RST_N

Confidential
NFC_SWP1/2 SIM1/2_DATA CAM_OIS_RST_N
GPIO_I2C_1P8
Baseband Block Diagram EXPANDER_RST_N
GPIO Expander
HRM_BOOST_EN
BTP_INT_N

NFC_ANT NFC IC NFC_EN/FIRM

NFC_HRM__I2C_1P8 PCAL6524
BTP_LDO_EN
NFC_EN/FIRM
*AP PMIC NFC_CLK_REQ SEN82LBXS2-YT30 NFC_IRQ ESE_PWR_EN
eSE_SPI WPC_EN
MST_PWR_EN
MST_EN/DATA POP
MFC IC
VDD_WLCHG
*IF PMIC
AMP_I2S RCV Amp RCV_AMP_OUT_P/N
LPDDR4 RAM
MFC_AP_INT
AMP_I2C_1P8 MAX98512BEWX+T RCV_OUT_FB_P/N
MFC_I2C_1P8
WPC_DET P9320S-2AHGI8 RCV
WPC_EN SPK Amp SPK_AMP_OUT_P/N

USB TYPE C
SPK

Conn.
MAX98512BEWX+T SPK_OUT_FB_P/N

2ND CAM PMIC SUB_PMIC2_I2C_1P8 MAIN_MIC_CLK, DATA

S2MPB03X01-6030 CODEC_RST_N MIC
SLIMBUS_D0/1 SUB_MIC_CLK, DATA SUB MIC
SUB_PMIC_I2C_1P8
SLIMBUS_CLK Audio codec EAR_OUT_L/R

10PIN EARJACK Conn.

FLASH CAM PMIC PROXY/IRIS_LED_EN
LED
S2MPB02X01-6030 FLASH_EN
CODEC_INT1_N WCD9341 EAR_OUT_FB, EAR_L/G DET

VOICE_INT EAR_MIC_P/N EAR L/R

SUB_PMIC_IRQ FLASH_LED_TORCH EAR_MIC_3.5_P
FM_L/R
CODEC_SPI

PM845_PON_OUT
AP SUB-PMIC FM_INT
FM RADIO
EAR MIC

FM_ANT
PM8005 AP_PMIC_SPMI_CLK FM_I2C_1P8 QSC5103M
AP_PMIC_SPMI_DATA
COPR_SPI
TSP_ICID / OLED_ID
TSP_INT
TSP_I2C_1P8
SW_ON
System Power PLCD_MIPI_4lane
*AP
Etc. Power
AP PMIC DISPLAY
VOL_UP EL_ON1
SUB PMIC
DISP_PM_INT EL_ON2
VOL_DN
PM845 AP_PS_HOLD
Display PMIC ELAVDD 7P6 WQHD+400
INT_KEY
6.38"
AP/CP
PMIC_PON_RST_N DISP_I2C_1P8 S2DOS05X01-6030 ELVSS -4P4
SLEEP_CLK
CT1612DB38400D0FLHA1 ELVDD 4P6
(38.4MHz Oscillator)

SDM845 Finger Print

BTP_SPI
BTP_INT_N
DISP_TE
CX2016DB16000D0FZZC1
CHG_DET / CHG_INT (16MHz Oscillator)
IFC_SENSE_CC IF_PMIC_I2C_1P8
SPEN_I2C_1P8
WACOM IC SPEN_VREF1 DIGITIZER
SPEN_IRQ_IP8
VBAT_SENSE
USB_AP_D_N/P
SPEN_PDCT_IP8 W9018 CL00 ~ CL36 BM035-I40B-C08-D
VBATGND_SENSE
PROXY_INT
AP_UART_TXD/RXD PROXY_I2C Proxy sensor / SVC LED RGB_R/G/B *IF PMIC
IFC_SENSE_INT_AP Hall sensor1 (AH1897S) HALL_INT
*AP PMIC
Motor (10pi 4t)
IF PMIC
VIB_PWM
MOTOR_P/N
Hall sensor2 (AH1897S) HALL_INT2

6AXIS_INT/INT2
VPH_PWR
MAX77705FEWN+T 6AXIS_SPI
6 axis sensor (LSM6DSL)
JIG VBUS_IF_5P0 OVP Load (battery path 차단) VPH_PWR
Switch VBUS_5P0 SENSOR_I2C Barometer sensor / Magnetic sensor (LPS22HB)
KTS1657EUY-TR
TA VBUS_IF_5P0 (Battery 충전,
VPH_PWR 공급) HRM_INT
HRM sensor (MAX86917EFD+T)
USB TYPE C Conn.

NFC_HRM_I2C
JIG_ONB_CC
GRIP_INT
VBUS_DISCHARGING_EN
GRIP_I2C GRIP sensor (SX9321IULTRT)
CC1 / CC2
IRIS_12C_1P8
MUIC_D_N/P
IRIS_MIPI_2 lane IRIS CAM
IRIS_RST_N / MCLK NL17SG08P5T5G
AUX Switch VTCAM_RST_N / MCLK
FRONT CAM
SBU1/2 EDP_AUX_P/N
DG2730DN-T1-GE4 CAM_UNIFY_I2C_1P8 VTCAM_I2C_1P8

SUB_DET VTCAM_MIPI_2lane
KN67B0.8-34D
CAM_UNIFY_AF_I2C_1P8 VTCAM_AF_I2C_1P8
USB3.0_SSRX0/1_M_AP, USB3.0_SSRX0/1_P_AP P2-0.35V
USB3.0_SSTX0/1_M_AP, USB3.0_SSTX0/1_P_AP
SUBCAM_I2C_1P8
WLAN_SLEEP_CLK
BT_EN *AP PMIC SUBCAM_AF_I2C_1P8
WiFi Antenna 1
(2.4GHz/5GHz) FROM_SPI REAR CAM
LTE Band 46 Rx Only
OIS_AF_I2C_1P8 (DUAL)
CAM_I2C_1P8
ANT+/BT/WiFi Antenna2
BT/WIFI IC
BT_PCM/UART
SUB_CAM_MIPI_4 lane
BM035-
배터리 사용 PATH GPIO EXPANDER (2.4GHz/5GHz)
BT_WAKE/
LTE Band 46 Rx Only
LBEE5DZ1QW-225 BT_HOST_WAKE CAM_MIPI_4 lane I78B-C08C
충전 PATH BT_I2S_IRQ CAM_RST_N / MCLK
SUB_CAM_RST_N /
CAM_OIS_RST_N
 ANT2000

MIC8000

ANT2002

ANT3000

ANT3001
C2000
V2000
L2000 L2002

U2000
L2008 C2008
C2084 C2009 L2006

V3010 L3017
L3012

L2001
C2003
V3008
L3014

R3012 R3013
R3023R3024
C2001

L3013
C3005
U3003 C3050

C2024

C3032 L3026
C2079

L2056
C2076 C2071

R8011
C8062
C2075 L2053 L2054
R3006 C3029

C4049
L2051 L2052 C4050 L3033 L3024

R3028
C3036
C3035
R3022
V7018 C3028

U3002

C4045
C8060

L3025
C3031
F2009 C2073
TP3004 TP3005

U4011

C8061
C3049 TP3006 TP3007

V70005

L3007
C3003

L3010
C3004
R5042 TP3011 TP3010

C10027

R3015
C10024

L3018
C3009
TP3013 TP3012

U3004
F3000
F3001
R3029

L10009

V3001
R5041 TP3003 TP3016 R3011

R3027
ZD10014
C10031 C10032

L2048
L2057
C2074 C10026

F3003
ZD10017 ZD10018
TP3014 TP3018
R3010

C2080
L2040
C10025

ZD10016 ZD10015 ZD10021 ZD10020

TP3002 TP3017 R3026 R3025
L2041 R3001 TP3009 TP3019

ZD3021 R3016 ZD3020

L2049 L3006 L3009 L3030 C3047

C3046
SUS3001

HDC10002

C3000
TP3015 TP3008
C3040

C3010R3000
L3019
C2070 U2007 L3008 L3011
HDC10001

L2039

U3000
C2077

C3033 R3009
C3034
C3001

R5053
R5052
C3002
L2045

RFS2002

R3017R3014 R3018R3019 R3021

C3045
C3030
ANT2005

R9002
R9001

L3031 C3039 C3038 C3037

L10008 C10021C10029

ZD3019 ZD3018 ZD3017

L3005 L3003 L3027

V7001
C9026 L3000 L3001

C9023
C10022

SC3000

C3021 C3027
C3008
L3004 L3002 C3022
HDC3000

L3020
C3007
F3002

R3005
TH3000
CN7000

V7021
C4030

C9010
L3021

C9002
C9003
C3025

L9002 C9011
L3023

C3026
C10028 C10023 TP3001

L9001
CN7001

L10006
C90111
L10004 TP3000

V7000
C9008

V7020
U9001

C10008 C10007 C10010 C10011 C10009

C9029

C10040

U4004
L10001 C9017 L10000 L10002 ZD10004
C9028
C4032 C3043

SC3002

LED9000
R7020 R7014 C7151
ZD9000 C9025 C3042 R3020

C4033
C9007 C3041 ZD3022

C9012 L3029 C3048 L3028 C3044

L9000

R4013

HDC7000
C9004

C9009
C9027
L9003 HDC9001 R8008 C8038

C8035 C8069
R5004 R5002
L9014

U8001
TP8000

C9100 C9072

C10041
C9030
C9031
TP8002
C9001

C8034
C9071
TP8003

C4034
SC3001
C9069 TP8001

C9074 U9005 C9070

C8042
C4035
TP9005

L8010
C8036

BOTHHOLE7003 CN7003 C8041

C9073
TP9007
R5011

C8037
U4006

R5055
R5054
C9059
V7023
V7022

C9057
ZD9001
TA7001

C4038
R5008
C9032
C9064 C9060 C9065
U9003

ZD9003 ZD9009

C4040
C10014

C9098 C9099

U4008
C4039

CON5000

CON5006
C9063 C9110
C9062

ZD9019
ZD9015
C9061 C9082 C7110
HDC6000
C9058
C10015 BOTHHOLE7004
C9068 R9020
C7112

C9104
C9055
C9066
C9067
ZD9006 C9005 C9103 R5070
C10005 C7111

R7008

C7152
ZD9004 R5073

C7153
C10006 ZD9008
U9000

U4007
R5071

L4005 L4004

R9000 R10002
ZD9007
C9056
TP_AXIS_INT2 TP4014 TP4013 TP4012
TP4011
R5072
TP_AXIS_INT

U10000 TP9006
C9006
C4037 C4036
C6072 C6073

ZD7003ZD7004
TP9001

C7102

ANT7012 ANT7014ANT7010
ZD7002
BOTHHOLE7010

R7034
ANT7008

C7099

C2083
BOTHHOLE7006

ANT7015
ZD7008
C7148

R7040 TH7001
ANT7016

TA7000
ZD7007

U7008
ANT7009
C7104 C7109

C7141
C7143
C7108

ZD7006
C7134
C7138
C7140
C7142 C7133 ZD7005

C7132
C7129
C7128
V7002

C7135
TA7003

C7131
C7130
U7011

C7145 C7146
TA7002
C7144 C7147 BOTHHOLE7000

R5017
R5016

R7038
C7137
C7136
R7003
C7139 DEBUG_IO TP7013 TP7012 TP7011 D E B U G _ C L K R7026

R7029 R7027

C7015
C7008
R7030 R7028

OSC7000 R7032 R7031

C7004
TP5002

C7071 C7072 C7052

C7010
C7005

C7094
C7097
C7077 C7064
C7003

C6068 C6066
C7045
C7007

C7074
C7073 C7079
C7067
C7069 C7068
C7070
C7012
C7037 C7013

C7076
C7075

L7006
C7088
C7083 C7051 C7092

C7089
L7008

C7080

C7062

C7061
C7058
C7096
C7081
C7029
C7093

C7078
C7095
C7098 C7028
L7007
U7003
C7025
L7010 C7035

C7021
C7020 L7005
L7004 C7036

L7011

L7009C7009
C7022

C7001

C7016

C7017
C7066
C7000 C7019
C7014

L7012

L7017 C6004
L7015
L7014
L7013
C7006
SC3006

C7059
C7002

C6029 C6016
C6031
C7063
C6058C6033
C6056

C6059
C6046 C6063 C6043

C6030
C6025 C6010

C6023

C6015
C6060
C7011 C7056
C6020
C6011 C6002

C6003
C6064 C6005
C6076 C6077

C6082
C6008 C6006
C6001 C6009 C6049

C6019
TP_SLIMBUS_DATA8001
TP7002

C6017
C6081

C6007

C7082 C6024

C6083
TP_SLIMBUS_DATA8000

C6062 C6028
C6042 TP5000

R5050
C6052

C6034
C7065
C5006
C6045 TP5001

C6014 C6000

C6040
C6041
C6061 C6013
C6018 C6032

C6051
C6079 C6080 C6065 C7057
C6078 C6055

C6022
C6048
C6050 C6075 C6054 C6057

C6053 C9044

C6047
C6027

L7021
L7023

L7024
C6044 C6026

C9107
C9041 C9048 C9033

L9010
C9106

L9004
C9035

L7022
C7123

U7010
C7122
C7125 C9038 C9034

C9051
C9052
L9011 C9046

C7124
TP7005 TP7010

U9002
TP7000 TP7008
C9045

C9053
C9054
C9050 C9042

C7126 C7127

C9049
C7119
C7116 C7118
C7117 C9047

L9008
R9012
C7115 C9086
C9043

C9037
C9036
R9015

C7120 C9083
R9014
L9007
C9084

C8050 TP2009

C9096
L9012 C9080 L9013

C2017
C2030
C2021
C2006
C2023
C2014 C2020

C2015
C2018
C2005
C2035
C2034
C2033
C2019
C2013 TP2000 TP2008

C2012 TP2001

C2010
C2011
C2004

C9087C9088
C2028

U2005
L2035 C2060
L2038 C2067
L2030 C2055
L2050 C2072
L2024 C2046

C9097R9009C9081 C9090C9077
C1020 C1015

L2037 C2065

L1036
C1039

C2031
C2022
C2029
C2027
C2026

C2016
C2032 R2003
L2047
C2078
L2055
L2046
F2008 L1035 HDC9000

SC3004

L1096 C1123
C1127

U1004
L1094

C1120
L1051

C1066L1068

C1061L1057
C90157 L12056
L1052

BOTHHOLE7007

C9078

C9079

C9092
C9091

C9093
L9006

L9009
C9089 L9005

V7017
BOTHHOLE7009

HDC11001
ANT12011
TP12002 TP_UB6001 TP_UB R6004
TP12001

HDC11000
R11007 C11009 TP11001 C11011 TP11000

ANT1003
C1037
C1019 C1038

R11008
C1036

U11000
L12050

V1002
R11001
R11002
R11006

RFS1002
R11003
R11005

R11004

C11004
C11007 C11002 C11008 C11001 C11003

C11000 L11001 L11000

L11002 C11010
SUS3002 C1029 L1025
L1023 C1105

RFS1000
C12036
R12015

R12013

ZD12015 ZD12014

C1023
R12011

R12010
C12030

L1014
C1022
C1024
ZD12025
C12029 C1027
ZD12024

ZD12008
ZD12011

ANT1000

ANT1001
HDC12000 ZD12010
R12006 C1101
L1006
R12005

ZD12017 ZD12016
ZD12009
L1008 C1104
R12004 C12026 ZD12023

R12003 C12025 ZD12022

RFS1001
ZD12013 ZD12012

BOTHHOLE12000

V12008
BOTHHOLE12002

V12010
V12009 ANT12009

ANT12008
L12030
BOTHHOLE12001
L12005

C12004
C12014
U12001

C12002
L12011

C12009
C12012

U12003 C12016
C12008
C12011

L12009
L12010
C12051 C12000

U12010C12013
L12002
V12000
C12006

C12010 L12008
ANT12002

C12015
C12022 C12003 C12020
C12053 C12017

L12013 V12002
L12014
C12021
C12052

ANT12003
C12019

L12001 V12013 L12012

ANT12001
 ANT3002

ANT2009
ANT7006C2007 L2003 V2001ANT2001
L2009

ANT2006
V2008

L2058

V2006
C2061C2064

L2044 C2063

L2036
L2107

SC3003U2006
F2000

U2001
C2025L2011

C2043 C2042

F2007 L2043
C2069
L2005L2004

L2108
C2664

C2066
V7014

C2062
ANT7022 U2518
L2111
C2557

SUS3000
C2564
L2109
C8066

C8067

ANT8001 ANT8000 L2007

L2110

C2068
L2042

L2010

ANT2003
V2003
R9021

C90113 U12070
R9023
V7015

C9019
U9006

V2005 V2007
ZD10000
C9014 C9020 L2021 L2018
C2053 C2052
ZD10010 ZD10009 ZD10008 ZD10007 C9015 C9022C9000 C9018

SIM3000
R9022
C10020
C10034

C10035
C12054 C10004 C10000 R5023
ZD10001 C10016 ZD10002 C10003 C12055 R5020

L2033
ZD3016 ZD3004 ZD3003

C2039 L2017 C2145 L2063

ZD8001 C2058
ZD10019 C10033 C10019

U12014L2062 F2006

C8052
L8012
C8053

C3054 L3036 ZD3012

SC3010
U2004
L2034

C2059
C2144

C3055 L3037 ZD3015 C8048

C12059C12058C12057C12056
R5005 R5003 R5013R5010
L7020

C3053 L3035 ZD3013 C8043

R10000

C10017
L8009

ZD3014
L3038
ANT7021
L2092
L2091
C8046

C3056 TP2005 TP2003

C8045
ZD3000
ZD8000
C9013
C9024

ANT7017 C3016 C3015

HDC10000 ZD10006

ZD10005
R7033

C7100
C9016C9021
C10001 C10002

C7101

ANT7019
C7107 C7103
R7036 R7035
C7106

V7008
ZD10013 ZD10012
R5001 R5000
C7114

ANT7020 V2004
L10005 ZD10011
C10039
V7009

ANT2004
ZD10003
R9004 C10013

CON5001 TP9002
ZD3001

TP9000

ANT7003
C4029

TP7006 TP4018
C3018 C3013 ZD3005 ZD3002
V7011 V7024
ZD3009

ZD3006

ZD3008 ZD3007
C3020
R3004

CON5003
C4091
U4005

TP4054
C4095

R4014

R3002
ANT7007
ZD3010
ZD3011

C9039
C9101

C4048
C4090

R3003

ANT7004 ANT7005

ANT7001 ANT7000
C9040
C9102
C3019
C3014

C4092
TP4051 TP4053
C3051
L3032
L4003

C4058
L3034 C3052
C4094

R5056
L4043L4044

C4077
C4031

TP4056

U4002
C4074
R5057
C4051 C90114

C4069
R4040 R4041
ZD7010 ZD7009

R5058
C4071
C4065

C4053

C4066
TP4061 TP4060
C4099 TP4057 TP4052 TP4050 TP4047
C4076 C4064
R7010
R7009

C7055
C7032 L7001L7000
C7150

TP4048

R7024 C7054 TP4049

C7149 C7027 C7018

C7024
C7084

C7042
C7041
C7030

C7087
R7025

C7031
C7086
C7043
L7002
C7034

U7001
C7048
R7004 U7000 TP7001

R7005
C7049
C7046
L7003
D7000 C7033
R7000

C7039 C7040 C7050 R7021 R7022

TH7000

C7047

R7023
C7053
R7013
R7012
R7006 R7011

TP7004

L7016
C7026 C7023

C7044
C7038

R7017R7015
R7018R7016

SC3008

C7085
R7037 C7091 U7002
U5000

R5061
R5024 R5021

C7090
U5001
C5002R5043

R5045 R5039R5040
C5005

R5060 R5044
TP5005

TP6005 TP7003 TP7009 TP7007

TP6003

UME6000
C6085 C6084

R5031
R5029
L3016

C6071 C6074 R5015 L3015 C7060 C6070

C3012
C3011
R3007
R3008
R5064

TP6013 TP6011 TP6007 TP_PS_HOLD

L10003 L10007 R10001 TP6008 TP6001 TP6006

C5000
TH5000 C10012 C10030 C10018
TP6012 TP6010
TP6009 TP6000
C5001 R5014

R5028 R7007

C6067
TR7000
UCP500

R7001
R5026 C6069
R9013
C9085

TP_SSC_DEBUG_RXD

R5047
TP_SSC_DEBUG_TXD

R5063
R5046
R5048
R5049

SC3007
ZD7001
R7002

TP5003

R5062 TP5004

R9006
C6021
U9004

C6012

R9007

R9005 R9008 R5036

R5025
C4028 R5030

R5037 R5033
R5038
R4007
R9010

R9003
R8010
R5012
R8013R12017 R12009 C12028

C12027
R12019 R12002 C12023

C12024

R5009
U4003

TP2011
R5035 T P _ C O D E C _ R E S E TC_OND E C _ S P I _ D O U T C O D E C _ S P I _ D I N

C5004 R8012 TP2010 TP_VOICE_INT TP_CODEC_INT CODEC_SPI_CLK CODEC_SPI_CSN TP2002

C8064

C5003
C8054
U8003
R5034
R5032

R5027
R12016 R12008
R12018 R12001

C4043
R4009
R4010

R8014

TP5006 TP2004
R4008 TP_FM_SLEEP_CLK
L4008
C4044

U4009 L4006
TP4015
C8063

L8015 C8065 C9076 R5006

C9075 R5007 TP4016
C4041 L4007
U1011
C1091

L12057

C1095 L1081 C1097

L1065
C1088 C1064
U12058 L1059

C1093
C1092
U1010
TP1001
U12026
C90137

TP1000
C1089 C90149
C1098
L1270
L1266

C1094
L1005

L12077 L1082 L1084

U12062
L12063
L12062
U12061

C1100
U8002L8008

L1085
L8011
L8002

C8015
C1071 C8018
C8029

C8016
L8003

L1067
C8027
C8013
C8010

C8026

C1072
R8006
C1069 R8005 C8044 C8006
C8023
C1070

L1058 C1073C1076C1077

L1064 L8006 C8025

C8017
C8007

L8000
U12067

C8028
C8024
R1000 C8022 C8051 C8009
C8030

R8000
R8002

C1078
C8005
C1081

C8047
C1065

C8019 C8014

L1066 C8011
C8020
L8005

L8004
C8049

R8003
C8021

C8055 C8031
C1079
L8007 C8033 C8032
C8012
U1000
C1002

C1003
R2002
R2000
C1000C1001 C1012 C1008

SC3009
R2001
C1021
L1010
C1017
L1011
C1018
C1050

C1051

L1043

C1007 C1102 C1006

C1046C1043C1042 V7012

TP1003 TP1002
C1047 L1009 TH1000 C1048 L12066

U1005
C1096 L1080
C1053
C1052

U12047 L1024C1031

L1101
U1302

U1003
C1401
L1103 L1100

C1059
L1054

L1000

C1320 L1394 L1002

L1603

L1604
L1605
L1104

U12015 C1016
C1404

L12065
L1102
ZD7000 F1501

L1012
U1301 L1055

C1113
F1009
R1005 L1567

F1000
C1402 L1601
C1403
L12071

C1126
L1600 L1001
U12069 C1125
R1006
L1602

L1004 C1400 L1007 C90140 C1014

TP4017 C4017 C4016

U4000

U8000 L8001
ANT1002

C4014

C8070
C8001 C8068

C8003
C1103

SC3005
C8002
L12049
C4015

R8001C8004 C8008

C4012
C11006 C11005
OSC11000

C8000

V1003

L4000
JTAG6002

D4000 C8056 C8057

L8014
L8013

D40001

C7113

ANT7002
L7018 L7019
JTAG6000

ANT7018 V3002
ANT7011
U4010

C7105
R4015

ZD12030 R12014
R12000

C12035

ZD12031 ZD12026
R12020 C4046 C4047
ZD12020 ZD12021
U12004
C12045 C12043 C12044
R12007

ZD12005 ZD12027
ZD12028

L12048
C12039

L12015
ANT12021 ANT12017 C12038
ANT12018

ZD12029

U12068 L12047
R12021
ZD12003 C8058

C12042

L12020

C12041
V12012
U12000
ANT12016
ZD12002 C12033

V12004

ANT12012
C12001L12000

L12004

ANT12014 ANT12015
JTAG6001

C12034 C12032

ANT12013
JTAG6003

ANT12019 ANT12020
ANT12010

V12007
C8059

R12012
ZD12006 ZD12001

ANT12006
V12003

ANT12004

ANT12005
 FM1

V100

U2 V101
ANT100
ANT101

SUS100

V102
C100
C101

FM4

USB100
AU100
 U1
FM3

FM2

SOC100
8. Level 3 Repair

8-3. Flow chart of Troubleshooting.

Oscilloscope Digital Multimeter

Power Supply + driver, ESD Safe Tweezer

8960 & Spectrum Analyzer Soldering iron

Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
8. Level 3 Repair

8-4-1. Power on

Mobile phone does not power on

YES

Check the Battery NO Charging the battery by TA. If its voltage level
Voltage level. is extremely low (under 2.5V),
Is it more than 3.5V? Charge current is only 50mA.
It will take more time to meet booting voltage

YES

Power-on the phone and NO

check the power-on Change the FRONT-LCD ASSY
sound
or motor Vibration.

YES

When pressing Power NO

key, check if the Power Replace the POWER KEY FPCB
key FPCB pad on front
is shorted

#1 Check the TP_PS_HOLD is High.

#2 Check the output voltage of U7003
YES - L7004=0.8V, L7005=1.1V
L7006=1.35V, L7009=0.8V
L8012=0.75V, L7017=0.75

※ Each voltage level has ±10% margin

NO → Change the U7003 If the voltage level is
Check the signal of
AP_PS_HOLD = 1.8V abnormal,

#4 Check the Clock OSC7000.

Frequency is 38.4MHz

YES ※ Test condition (Oscilloscope setting)

: 20.0us.div (time division)
 Replace the OSC7000.

check the initial operation (8-4-3)

YES

END

Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
8. Level 3 Repair

8-4-2. Motor

Motor does not work

Yes

No
Check the Clip Resolder or Reconnect
(ANT7002 and ANT7018) ANT7002, ANT7018

Yes

No
Check (crack,open,etc) Resolder or Replace
L7018, L7019 L7018, L7019

Yes

No
Check the C7090 = 5.2V Resolder or Replace U7002

Yes

Replace Motor

Yes

END

Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
8. Level 3 Repair

8-4-3. initial

Initial Failure

Re-download Software

Re check “8-4-1 Power on” NO

Check the UCP500 (Crack etc )
Trouble shooting process

Normal

Change UME6000.
Do not use Blank MEMORY

Normal

Change PBA

YES

END

Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
8. Level 3 Repair

8-4-4. SIM PART

SIM Card does not work

Check the SIM card Abnormal Change SIM Card or

SIM Socket Replace SIM Socket

Normal

Check the SIM Voltage

VDD_NFC_SIM1, VDD_NFC_SIM2, NO Check the NFC IC (U4002)
VREG_L9A_1P8_3P0, VREG_L10A_1P8_3P0 Check the PMIC (U7003)
1.8V or 3.0V?

YES

Check the SIM RST / CLK / IO

NO
SIM1 : ZD3003, ZD3004, ZD3005 Check the AP (UCP500)
SIM2 : ZD3006, ZD3007, ZD3008
Is signal OK?

YES

END

Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
8. Level 3 Repair

8-4-5. SD PART

SD Card does not work

Check the SD card Abnormal Change SD Card or

SD Socket Replace SD Socket

Normal

Check the SD Voltage

NO
VREG_L21A_2P95 Check the PMIC (U7003)

2.95V?

YES

Check the SD CLK//DATA/CMD

NO
ZD3000, ZD3012, ZD3013 Check the AP (UCP500)
ZD3014, ZD3015, ZD3016
Is signal OK?

YES

END

Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
8. Level 3 Repair

8-4-6. OTG

OTG does not work

Abnormal
Check the OTG ICON Check the OVP
(U4000)

YES

Abnormal Check the IF PMIC

Check the Voltage of
BUCK OUT (L7001)=5V (U7001)

YES

Check the IF Socket &

SUB PCB connector

Normal

END

Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
8. Level 3 Repair

8-4-7. Hall IC

Hall Sensor #2 of main PBA does not work

Yes

No
Check the voltage
C4036, L4004 =1.8V Replace U7003

Yes

Check
Check the
the voltage
voltage No
without
C10092Magnet
=1.8V
C4037 =1.8V Replace U4007
with Magnet
C4037 =0V

Yes

END

Hall Sensor #1 of main PBA does not work

Yes

No
Check the voltage
C12001, L12000 =1.8V Replace U7003

Yes

Check the voltage No

without Magnet Replace U12000
C4037 =1.8V
with Magnet
C4037 =0V
Yes

END

Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
8. Level 3 Repair

8-4-8. 6Axis sensor

6Axis Sensor does not work

Yes

No
Check the voltage
C4039, C4040 =1.8V Replace U9005

Yes

No
Check U4008’s package, smd status
(crack, open, short, etc.) Replace U4008

Yes

No
Check 6Axis Replace U4008
MOSI, CLK, NSS, MISO pin (If there is still out of order, replace UCP500)

Yes

END

Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
8. Level 3 Repair

8-4-9. Magnetic sensor

Magnetic Sensor does not work

Yes

No
Check the voltage
C4045 =1.8V Replace U9005

Yes

No
Check U4011’s package, smd status
(crack, open, short, etc.) Replace U4011

Yes

No
Check R5008, R5011 Replace U4011
(I2C is OK?) (If there is still out of order, replace UCP500)

Yes

END

Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
8. Level 3 Repair

8-4-10. Barometer sensor

Barometer Sensor does not work

Yes

No
Check the voltage
C4038 =1.8V Replace U9005

Yes

No
Check U4006’s package, smd status
(crack, open, short, etc.) Replace U4006

Yes

No
Check R5008, R5011 Replace U4006
(I2C is OK?) (If there is still problem, replace UCP500)

Yes

END

Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
8. Level 3 Repair

8-4-11. Proximity + RGB sensor

Proximity + RGB Light Sensor does not work

Yes

Check the voltage No

L3028, C3043, 3044 =1.8V Replace U9005
(Sensor’s IO voltage)

Yes

Check the voltage No

L3029, C3048 =3.3V Replace U9001
(Sensor’s LED voltage)

Yes

No
Check R3016, R3017
Replace UCP500
(I2C is OK?)

Yes

No
Check connection HDC3000 Reconnect HDC3000

Yes

Abnormal
Check sensor FPCB
(crack, damaged, etc.) Replace Sensor FPCB

Yes

END

Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
8. Level 3 Repair

8-4-12. HRM sensor

HRM Sensor does not work

Yes

Check the voltage No

C4032, C4033 =1.8V Replace U7003
(Sensor’s ASIC voltage)

Yes

Check the voltage No

C4034, C4035 =5.25V Replace U4005
(Sensor’s LED voltage)

Yes

No
Check R5002, R5004
(I2C is OK?) Replace U4004

Yes

END

Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
8. Level 3 Repair

8-4-13. Display

LCD is still off after PWR ON

Yes

No
Check the connection of Reconnect the HDC9000
HDC9000

Yes

Check No
VDD_DDI_3P0=3.0V (C9077) Resolder or Replace the PMIC (U9002)
VDD_DDI_1P8=1.8V (C9078 )
VDD_DDR_1P6=1.6V(C9090)

Yes

No
Check Resolder or Replace the PMIC (U9002)
ELVDD_4P6=4.6V (C9034,C9035)
ELVSS_-4P4 = -1.4 ~ -5.4V (C9036,C9037)
ELAVDD_7P6 = 5.8 ~ 7.9V (C9038)

Yes

Resolder or Replace UCP500

Yes

END

Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
8. Level 3 Repair

8-4-14. TSP

Touch Screen does not work

Yes

Check TSP Connector on No

MAIN PBA Reconnect the HDC9000

Yes

Check No
VDD_TSP_1P8 (C9081, C9051) Resolder or Replace U9002
VDD_TSP_3P0 (C9080, C9053)

Yes

Replace the UB

Yes

END

Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
8. Level 3 Repair

8-4-15. VT CAMERA

“Camera” function does not work

Yes

Check the Camera connector No

Reconnect the HDC10002
on Main PBA

Yes

Check the voltage

C10019 : 2.8V No
C10028 : 1.05V Resolder or Replace U9001
C10020 : 1.8V
C10021,C10029 : 2.8V

Yes

No
Check the VTCAM_MCLK is
Replace the PBA
24Mhz (C10030)

Yes

Replace the camera module

Yes

END

Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
8. Level 3 Repair

8-4-16. 12M CAMERA

“Camera” function does not work

Yes

Check the Camera connector No

Reconnect the HDC10000
on Main PBA

Yes

Check the voltage

C10005, C10006 : 1.1V,
C10014, C10015 : 1.0V No
C10004 : 1.1V , C10009 : 3.2V Resolder or Replace U9003
C10010, C10011 : 2.8V ,
C10003 : 1.8V

Yes

No
Check the CAM_MCLK is
Replace the PBA
24Mhz (C10012)

Yes

Replace the camera module

Yes

END

Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
8. Level 3 Repair

8-4-17. IRIS CAMERA

“Camera” function does not work

Yes

Check the Sensor FPCB No

Reconnect or Replace the Sensor FPCB
Connection

Yes

Check the Camera module No

Reconnect the HDC10001
Connection

Yes

No
Check the voltage
Resolder or Replace U9001
C10022 : 2.8V

Yes

Check the voltage No

C10023 : 1.05V , C10024 : 1.8V Resolder or Replace U7003

Yes

No
Check the IRIS_MCLK is
Replace the PBA
24 Mhz (C10018)

Yes

Replace the camera module

Yes

END

Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
8. Level 3 Repair

8-4-18. Finger Print

Finger Print Sensor does not work

Yes

No
Check the Sensor FPCB
Connection Reconnect or Replace the Sensor FPCB

Yes

Check the voltage No

C9103 = 3.0V Check U9000 or UCP5000
C9005 = 1.8V

Yes

Check U9000 No
C9006 = 3.2V over Replace U7010

Yes

Abnormal
Check sensor FPCB
Replace Sensor FPCB
(crack, damaged, etc.)

Normal

No
Check ZD9007,ZD9008 Replace the Sensor FPCB or
C9082,ZD9006
(SPI is OK?)
Replace UCP500

Yes

END

Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
8. Level 3 Repair

8-4-19-1. Main MIC

Check main microphone function

In voice call Handset mode
or voice recorder mode

Check sub board NO

Set the HDC8000 connection
Connection (HDC12000)

YES

Check the signal of

NO
C8049 = 1.8V
Resolder or replace the U8002 (Codec IC)
R8005 = 2.4MHz

YES

Replace the Sub board

YES

END

Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
8. Level 3 Repair

8-4-19-2. Sub(2nd) MIC

Check sub(2nd) microphone function

In voice call LoudSPK mode
or camcording mode

YES

Check the signal of

C8050, C8061= 1.8V NO
R8006 = 2.4MHz Resolder or replace the U8002(Codec IC)

YES

Resolder or replace the MIC8000

YES

END

Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
8. Level 3 Repair

8-4-20. Speaker part

Check the speaker function,

Play MP3 with maximum volume level

Check the contact

NO
C-clips(pins) of ANT100,
Resolder or replace the ANT100, ANT101 (sub pba)
ANT101(sub pba)

YES

Check the signal of

NO
C8000, C8001, C8068
Resolder or replace the U8000 (SPK amp)
= 10V

YES

Check the signals of NO

L12047, L12048 Resolder or replace the L12047, L12048

YES

Replace the SPK module

YES

END

Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
8. Level 3 Repair

8-4-21. Receiver part

Check the Receiver function,

In voice call Handset mode

Check the contact

NO
C-clips(pins) of
Resolder or replace the ANT8000, ANT8001
ANT8000, ANT8001

YES

Check the signals of NO

C8034, C8035, C8069 Resolder or replace the U8001 (RCV amp)
= 10V?

YES

Check the signals of NO

Resolder or replace the L8009, L8012
L8009, L8012

YES

Replace the RCV module

YES

END

Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
8. Level 3 Repair

8-4-22. BT/WIFI

BT/WIFI is not working

Yes

No
Check BT or WIFI fuction ON Enable BT or WIFI function.

Yes

No
Check the Voltage on Check the U7003
C3022 = 1.8V
(Crack, open, damaged, etc)

Yes

Check the Voltage on No

R3006= Resolder or change R3006
3.7~4.3V(VBAT)

Yes

No
Check the status of Resolder or change the
ANT3000,ANT3001,ANT3002 ANT3000,ANT3001,ANT3002

Yes

Check the Status of Resolder or Replace of

C3005,C3007,C3008,C3009,C3010, No
C3005,C3007,C3008,C3009,C3010,
C3029,C3030,C3031,C3032,C3050, C3029,C3030,C3031,C3032,C3050,
V3008,V3010 V3008,V3010

Yes

Resolder or change U3002

Yes

END

Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
8. Level 3 Repair

8-4-23. GPS

GPS is not working

Yes

No
Check GPS function ON Enable GPS Function in the setting.

Yes

No 1. Resolder or Replace ANT2009

Connected Check the Antenna
connect 2. Replace REAR

Yes

Check(crack,open,etc)
C2075, C2076, L2051, F2009, C2073, No
Resolder or change the wrong element
L2040, L2041, L2045, L2046, L2047, (open, crack, deviation, etc)
U2007, F2008

Yes

No Check OSC7000
Check 38.4MHz Clock at output
of OSC7000 (short, open, crack, etc.)

Yes

No Check AP PMIC(U7003)
Check the voltage on
L2039=1.8V (short, open, crack, etc.)

Yes

Resolder or change U2005

Yes

END

Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
8. Level 3 Repair

8-4-24. FM Radio

FM Radio is not working

Yes
No
Check FM Radio function ON Enable FM Radio Function in the setting.

Yes

No
Check the Earphone Connect the earphone into the phone.

Yes

No
Check the Sub PBA work well. Replace the Sub PBA.

Yes
No Resolder or change the wrong element
Check C4041, L4006 (open, crack, deviation, etc)

Yes

Check the voltage on

C4043=1.8V No Check AP PMIC(U7003)
C4044=2.8V (short, open, crack, etc.)
Check Reference Clock at
TP_FM_SLEEP_CLK.

Yes

Resolder or change U4009

Yes

END

Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
8. Level 3 Repair

8-4-25. NFC

NFC is not working

Yes

No
Check NFC function ON Enable NFC Function

Yes

No
Check the NFC FPCB Antenna Replace NFC Antenna

Yes

No
Check the Antenna connect Resolder or Replace ANT7008, ANT7012
ANT7008, ANT7012

Yes

Check the voltage on

C4053 = 1.8V No Check AP PMIC(U7003)
Check reference clock at (short, open, crack, etc.)
TP4061

Yes

Check L4043, L4044,

No Resolder or change the wrong element
C4076, C4077, C4066, C4069, C4071,
R4040, R4041, C4064, C4074, C4065 (open, crack, deviation, etc)
(crack, open, damaged, etc.)

Yes

Resolder or Replace U4002

Yes

END

Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
8. Level 3 Repair

8-4-26. MST

MST is not working

Yes

No
Check the battery level
Battery >= 5% Charging the Battery

Yes

No
Check MST FPCB Antenna Replace MST Antenna

Yes

No
Check the Antenna contact
Resolder or Replace ANT7009, ANT7014
ANT7009, ANT7014

Yes

Check voltage at C7144 No

Check signal at ANT7014 Resolder or Replace U7008
(*#0*# -> MST test -> turn on
continous)

Yes

END

Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
8. Level 3 Repair

8-4-27-1. Charging Part

Wirless Charging (Normal/Fast)

TA / USB Insert

Charging Sequence NO Reconnect TA or USB

Start C4012 = 5V or 9V or Check sub PBA

YES

NO Resolder or Replace U4000

Check the voltage
C4014 = 5V or 9V

YES

NO Resolder or Replace U7001

Battery is Charging?

END

Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
8. Level 3 Repair

8-4-27-2. Charging Part

Wirless Charging (Normal/Fast)

Contact Wireless charger

Charging Sequence NO Replace Combo Antenna

Start C7142 = 5V ~ 11V

YES

Check the voltage NO Resolder or Replace U7011

C7018 = 5V or 10V

YES

NO Resolder or Replace U7001

Check again about
charging status

YES

END

Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
8. Level 3 Repair

8-4-28. GSM 850/900, CDMA BC0, WCDMA B5/8, LTE B5/8/12/13/17/18/19/20/26/28/71

RX

NORMAL CONDITION
Catch the channel?

No
No
Check RFS 1001 ≤ -65dBm Check the ANT, Sub PBA

Yes

No Resolder or change
Check L1007 ≤-65dBm
RFS1001, C1104, L1006, C90140

Yes

No Resolder or change
Check C1102 ≤-65dBm
F1000, C1016

Yes

Check component No
soldering status ok? Resolder or change
U1000, C1006 U1000, C1006

Yes
No
Check C1015 ≤-65dBm Resolder or change
C1015, U1000

Yes

Check soldering
status(U2005) and the No Resolder or change
voltage at C2010, C2033 U2005
=1.0V & C2020=1.2V &
C2014, C2019=1.8V

Yes

No
Receiver is OK? Resolder or change
U2005

Yes

END

Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
8. Level 3 Repair

8-4-29. GSM 1800/1900, WCDMA B1/2/4, TDSCDMA B34/39, LTE B1/2/3/4/25/39/66 RX

NORMAL CONDITION
Catch the channel?

No
No
Check RFS1001 ≤ -65dBm Check the ANT, Sub PBA

Yes

No Resolder or change
Check L1007 ≤-65dBm
RFS1001, C1104, L1006, C90140

Yes

No Resolder or change
Check L1002 ≤-65dBm
F1000, L1000

Yes

No
Check component
soldering status ok? Resolder or change
U1005, C1109 U1005, C1109

Yes
No
Check C1066 ≤-65dBm Resolder or change
U1005, C1066

Yes
No
Resolder or change
Check L1096 ≤-65dBm
U1004, C1123

Check soldering
status(U2005) and the Resolder or change
voltage at C2010, C2033 U2005
=1.0V & C2020=1.2V &
No
C2014, C2019=1.8V

Yes

No Resolder or change
Receiver is OK? U2005

Yes

END

Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
8. Level 3 Repair

8-4-30. LTE B7/38/40/41 RX

NORMAL CONDITION
Catch the channel?

No
No
Check RFS 1000 ≤ -65dBm Check the ANT, Sub PBA

Yes

No Resolder or change
Check C1031 ≤-65dBm
RFS1000, C1105, C1029, L1024

Yes

No
Check component
Resolder or change
soldering status ok?
U1005, U12026
U1005, U12026

Yes

No
Check C1048 ≤-65dBm Resolder or change
C1048

Yes

No
Check L1081 ≤-65dBm Resolder or change
U1010, C1097

Yes

Check soldering No
status(U2005) and the Resolder or change
voltage at C2010, C2033 U2005
=1.0V & C2020=1.2V &
C2014, C2019=1.8V

Yes

No
Resolder or change
Receiver is OK?
U2005

Yes

END

Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
8. Level 3 Repair

8-4-31. LTE B34 RX

NORMAL CONDITION
Catch the channel?

No
No
Check RFS 1001 ≤ -65dBm Check the ANT, Sub PBA

Yes

No Resolder or change
Check L1007 ≤-65dBm
RFS1001, C1104, L1006, C90140

Yes

No Resolder or change
Check L1002 ≤-65dBm
F1000, L1000

Yes

No
Check component
soldering status ok? Resolder or change
U1005, L1055 U1005, L1055

Yes
No Resolder or change
Check C1059 ≤-65dBm F1009, C1059

Yes
No
Resolder or change
Check C1066 ≤-65dBm C1066

Yes

No Resolder or change
Check L1096 ≤-65dBm U1004, C1123

Yes

Check soldering
status(U2005) and the No
Resolder or change
voltage at C2010, C2033 U2005
=1.0V & C2020=1.2V &
C2014, C2019=1.8V

Yes

No Resolder or change
Receiver is OK? U2005

END

Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
8. Level 3 Repair

8-4-32. CDMA BC0, GSM 850/900, WCDMA B5/8, LTE B5/8/12/13/17/18/19/20/26/28

DRX

NORMAL CONDITION
Catch the channel?

No

No
Resolder or change
Check V2001 ≤ -65dBm ?
ANT2001

Yes

No
Check L2005 ≤ -65dBm ? Resolder or change
L2003, L2004

Yes

Check component No Resolder or change

soldering status ok? F2000, C2025
F2000, C2025

Yes

No
Check component soldering status OK at Resolder or change
U2001, C2046 ? U2001, C2046

Yes

Check soldering status(U2005) and the NO

voltage at C2010, C2033 =1.0V & Resolder or change
C2020=1.2V & C2014, C2019=1.8V U2005

Yes

NO
Resolder or change
Receiver is O.K? U2005

Yes

END

Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
8. Level 3 Repair

8-4-33. GSM1800/1900, WCDMA B1/2/4, LTE B1/2/3/4/25/66 DRX

NORMAL CONDITION
catch the channel?

No

No
Check L2053 ≤ -65dBm ? Resolder or change
ANT2009, C2075, C2076

Yes

No
Resolder or change
Check C2063 ≤ -65dBm ? L2051, F2009, L2052, L2036

Yes

No
Check component soldering status OK at Resolder or change
U2006, C2065 ? U2006, C2065

Yes

No Resolder or change
Check C2065 ≤ -65dBm ?
C2065, U2006

Yes

Check soldering status(U2005) and the No

Resolder or change
voltage at C2010, C2033 =1.0V &
U2005
C2020=1.2V & C2014, C2019=1.8V

Yes

No
Resolder or change
Receiver is O.K?
U2005

Yes

END

Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
8. Level 3 Repair

8-3-34. LTE 38/41 DRX

NORMAL CONDITION
catch the channel?

No

No
Check L2053≤ -65dBm ? Resolder or change
ANT2009, C2075, C2076

Yes

No
Resolder or change
Check L2063≤ -65dBm ? L2051, F2009, L2052, L2036

Yes

No
Check component soldering status OK at Resolder or change
U2006, C2069 ? U2006, C2069

Yes

No Resolder or change
Check L2043 ≤ -65dBm ?
C2069, U2006

Yes

No
Check component soldering status OK at Resolder or change
F2007, C2068 ? F2007, C2068

Yes

No Resolder or change
Check C2068 ≤ -65dBm ?
C2068, F2007

Yes

Check component soldering status OK at No Resolder or change

C2072 ? C2072

Yes

Check soldering status(U2005) and the

No Resolder or change
voltage at C2010, C2033 =1.0V &
C2020=1.2V & C2014, C2019=1.8V U2005

Yes

No
Resolder or change
Receiver is O.K?
U2005

Yes

END

Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
8. Level 3 Repair

8-3-35. LTE B34 DRX

NORMAL CONDITION
Catch the channel?

No

No
Check L2053≤ -65dBm ? Resolder or change
ANT2009, C2075, C2076

Yes

No Resolder or change
Check L2063≤ -65dBm ?
L2051, F2009, L2052, L2036

Yes

No
Check component soldering status OK at Resolder or change
U2006, C2069 ? U2006, C2069

Yes

No Resolder or change
Check L2108 ≤ -65dBm ?
C2664, U2006

Yes

No
Check component soldering status OK at Resolder or change
U2518, C2557 ? U2518, C2557

Yes

No Resolder or change
Check C2065 ≤ -65dBm ?
C2065, U2006

Yes

Check soldering status(U2005) and the

No Resolder or change
voltage at C2010, C2033 =1.0V &
C2020=1.2V & C2014, C2019=1.8V U2005

Yes

No
Resolder or change
Receiver is O.K?
U2005

Yes

END

Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
8. Level 3 Repair

8-3-36. LTE B39 DRX

NORMAL CONDITION
Catch the channel?

No

No
Check L2053≤ -65dBm ? Resolder or change
ANT2009, C2075, C2076

Yes

No
Resolder or change
Check L2063≤ -65dBm ? L2051, F2009, L2052, L2036

Yes

No
Check component soldering status OK at Resolder or change
U2006, C2069 ? U2006, C2069

Yes

No Resolder or change
Check L2108 ≤ -65dBm ?
C2664, U2100

Yes

No
Check component soldering status OK at Resolder or change
U2518, C2564 ? U2518, C2564

Yes

No Resolder or change
Check C2065 ≤ -65dBm ?
C2065

Yes

Check soldering status(U2005) and the

No
voltage at C2010, C2033 =1.0V & Resolder or change
C2020=1.2V & C2014, C2019=1.8V U2005

Yes

No
Resolder or change
Receiver is O.K?
U2005

Yes

END

Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
8. Level 3 Repair

8-4-37. GSM 850/900 TX

NORMAL CONDITION
Catch the channel?

No

Yes
Check RFS 1001 Check the ANT
about ≥ 23dBm?

No
Yes Resolder or change
Check L1007 ≥ 23dBm
C1104, L1006, C90140

No
Yes Resolder or change
Check C1006 ≥ 23dBm
F1000, C1016

No

Check component No
soldering status ok? Resolder or change
U1000, C1100 U1000, C1100

Yes

Check component No
soldering status ok? Resolder or change
U1011, L12077 U1011, L12077

Yes

Check soldering
status(U2005) and the No
Resolder or change
voltage at C2010, C2033
U2005
=1.0V & C2020=1.2V &
C2014, C2019=1.8V

Yes

No Resolder or change
Receiver is OK? U2005

Yes

END

Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
8. Level 3 Repair

8-4-38. GSM 1800/1900 TX

NORMAL CONDITION
Catch the channel?

No

Yes
Check RFS 1001 Check the ANT
about ≥ 23dBm?

No
Yes Resolder or change
Check L1007 ≥ 23dBm
C1104, L1006, C90140

No
Yes Resolder or change
Check L1035 ≥ 23dBm
F1000, L1000, C1039

No

Check component No
soldering status ok? Resolder or change
U1005, C1096, C1095 U1005, C1096, C1095

Check component No Resolder or change

soldering status ok? U1011, C1098
U1011, C1098

Yes

Check soldering
status(U2005) and the No Resolder or change
voltage at C2010, C2033
U2005
=1.0V & C2020=1.2V &
C2014, C2019=1.8V

Yes

No Resolder or change
Receiver is OK? U2005

Yes

END

Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
8. Level 3 Repair

8-4-39. CDMA BC0, WCDMA B5/8, LTE5/8/12/13/17/18/19/20/26/28 TX

NORMAL CONDITION
Catch the channel?

No

No
Check RFS 1001 Check the ANT
about ≥ 23dBm?

Yes
No
Resolder or change
Check L1007 ≥ 23dBm
RFS1001, C1104, L1006, C90140

Yes

No
Check C1020 ≥ 23dBm Resolder or change
F1000, C1016, C1015

Yes

Check component No
soldering status ok? Resolder or change
U1000, C1006 U1000, C1006

Yes

Check soldering
status(U2005) and the No
voltage at C2010, C2033 Resolder or change
=1.0V & C2020=1.2V & U2005
C2014, C2019=1.8V

Yes

No
Resolder or change
Receiver is OK?
U2005

Yes

END

Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
8. Level 3 Repair

8-4-40. TDSCDMA B34/39, WCDMA B1/2/4, LTE B1/2/3/4/25/34/39/66 TX

NORMAL CONDITION
Catch the channel?

No

No
Check RFS 1001 ≥ Check the ANT
23dBm?

Yes
No
No Resolder or change
Check L1007 ≥ 23dBm
RFS1001, C1104, L1006, C90140

Yes
No

Check L1002 ≥ 23dBm Resolder or change

F1000, L1000

Yes

Check component No
soldering status ok? Resolder or change
U1005, L1035 U1005, L1035

Yes

No
Check C1039 ≥ 23dBm Resolder or change
C1039

Yes

Check soldering
status(U2005) and the No Resolder or change
voltage at C2010, C2033 U2005
=1.0V & C2020=1.2V &
C2014, C2019=1.8V

Yes

No
Resolder or change
Receiver is OK?
U2005

Yes

END

Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
8. Level 3 Repair

8-4-41. LTE B7/38/40/41 TX

NORMAL CONDITION
Catch the channel?

No

No
Check RFS 1000 ≥ Check the ANT
23dBm?

Yes
No
Resolder or change
Check C1031 ≥ 23dBm
RFS1000, C1105, C1029, L1024

Yes

No
Check component
soldering status ok? Resolder or change
U1005, C1048, L12066 U1005, C1048, L12066

Yes

Check soldering
status(U2005) and the No
voltage at C2010, C2033 Resolder or change
=1.0V & C2020=1.2V & U2005
C2014, C2019=1.8V

Yes

No
Resolder or change
Receiver is OK?
U2005

Yes

END

Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
8. Level 3 Repair

8-4-42. Force Touch

Touch Screen does not work

Yes

Check TSP Connector on No

MAIN PBA Reconnect the HDC9000

Yes

Check the voltage No

VDD_TSP_1P8 (C9081) = 1.8V Resolder or Replace U9002
VDD_TSP_3P0 (C9080) = 3.0V

Yes

Replace the Display module

Yes

END

Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
8. Level 3 Repair

8-4-43. DeX Station

DeX does not work

Yes

No
Check the TA connected to Connect TA to DeX Station
DeX station

Yes

Check the DeX work Yes

properly after changing Change the DeX Station
another DeX Station

No

No No Connect again or
Lower Sub PBA chage the lower
USB Device is recognized
Connection is OK Sub PBA

Yes Yes

DeX Screen is Change the U7001

displayed to monitor
Yes
DeX work END
No

Yes
Lower Sub PBA
Change the U4003 No
connection is OK

No
Change Main
Connect again or
PBA
Change lower Sub PBA

Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
8. Level 3 Repair

8-4-44. S PEN

“S-Pen” function does not work

Yes

No
Check the Digitizer connector
on Main PBA Reconnect the HDC11000

Yes

No
Check the voltage
Resolder or Replace U7003
C7080 3.3V

Yes

Check the OSC11000 is 16 Mhz No

Resolder or Replace OSC11000
(C11005)

Yes

Replace the Display module

Yes

END

Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.