Truck Parts Catalogue May 2021
Truck Parts Catalogue May 2021
Truck Parts Catalogue May 2021
Catalogue
HC-ATM Group Pty Ltd
ABN: 87 140 887 501
TELEPHONE: (07) 3277 5111 FAX: (07) 3875 1945
WEB: www.aussietruckparts.com.au
102 Stradbroke St, Heathwood, Brisbane, QLD 4110
About Us
We manufacture heavy duty and high-quality Truck Parts, Trailer Parts and Tooling designed for long
life and reliability.
Our parts have been field tested in tough Australian, Papua New Guinea, Indonesia and U.S.A
conditions including mine sites, off-road and logging sites to make sure they perform.
Our design and innovation in manufacturing produces the reliability and cost effectiveness required in
today’s market.
Our Philosophy
If it works well in the tough Australian conditions then it will work anywhere!
We Supply To …
1-1/2” – 10 Spline, Standard “S” Head Camshafts - Heavy Duty Cams for use with Tayco Lock-On Slack Adjusters
03.1210.L 03.1210.R 205.1mm 45mm 162.6mm 22mm For Mack - Heavy Duty Version of 03.021 O.L & 03.021
O.R
Heavy Duty
98.1210.L Camshaft Kit Left Hand & Camshaft Kit Right Hand
98.1210.R Includes:
1 x 03.1210 L or R & 1 x 01.0131.00
ARM 67.0mm
OD = 120mm
Hole PCD = 96 X 8.8mm
98.38MH39401M Tapped Hole PCD = Hub Fix
Width = 152.4mm
OD = 44.45mm (Button /
Pin) Mack Upper Insulator
Replaces
98.25115012 Length = 152.4mm
Mack 10QK370 & ATRO MA37000
Height= 76.2 Mm
Width = 114.30mm
OD = 50.2mm
Straddle Pin for Primaax Suspension with 7/8
09.1665.18 Centre to Centre = 111.0mm
Hole
Hole = 16.0mm
OD = 76.35mm
Bush Length = 64mm Hendrickson Torque Rod Bush
09.1659.08
Pin Length = 82mm Replaces: 45477.000L, Atro IN35190
ID = 28.8mm
OD = 76.35mm
Bush Length = 64mm Hendrickson Torque Rod Bush
09.1659.18
Bolt Hole = 20mm Replaces: 45477.001L, Atro IN35180
Centre to Centre =144mm
Length = 104mm
Width = 56mm Kenworth Hood Mount Block
12.6002.8
Height = 71mm Replaces R85-1236 & R85-1236R
Holes Centres Are
60mm
OD = 189.5mm
Kenworth Seal Air Piping
12.6004.9 ID= 176mm
Replaces
G42-1008 Kenworth Part Number
Length = 80mm
Width = 34mm Kenworth Hood Mount Block
12.6005.8 Height = 80mm
Replaces R85-1252L & R85 1252R
Holes Centres Are
30mm
Length = 80mm
Width = 34mm Kenworth Hood Mount Block
12.6006.8 Height = 80mm
Replaces R85-1160L & R85 1160R
Holes Centres Are
40mm
Kenworth Bush
OD = 80mm
Typical applications are as a bottom
ID= 16.5mm radiator mount, cab mounts, and/or
12.6011.8 hood mounts
MiddleDiameter=45mm
Replaces
Height = 63mm
Kenworth K066-250 & K066-176
Top & Bottom view - sold individually Made with 80 Duro
OD = 40.9mm
ID= 20mm Kenworth Bonnet Pivot Bush
Middle Diameter Comes with 2 bushes & 1 centre pin
=27.5mm
Replaces
Overall Height =
12.6101.8 K066-497 Kenworth Part Number
16.4mm
Rubber Bush
Per Bush K066-500 Kenworth Part Number
Pin OD= 20.1mm Pin / Shaft
Pin ID =15.8mm Made with 80 Duro
Pin Length = 41mm
OD = 2 3/4" Replaces
09.1656.28 Length = 8 1/6” ATRO TT38000A, TT38000, Neway
229610, Arvin Meritor R302228,
Stud = 1 1/4" 12 TPI R308651, Euclid E-2228, E-8651, GAFF
13518, 13533, Hendrickson 44697,
64400-004L, Kenworth 229610
I.D = 105mm
Kenworth Suspension Bush
O.D=138 mm
12.K066-95 Replaces Kenworth K066-95
Overall Length=
132mm
I.D = 22.5mm
O.D= 55.7mm For a 7/8 Bolt to be used with 12.K102-
09.1340.08 1488 Rod
Length= 76.2mm
Centre to
Centre=575.5mm
Adjustable Cross Member Under Bell
12.K102-1488 Length of Centre Pin= Torque Rod includes Bushing (Non-
76.2mm repairable)
Length = 101mm
Western Star Isolator Rear Support
Width = 76mm Hood
99.A1718108001.70 Depth = 38mm
Holes Centres are Replaces
Top & Bottom view 50mm
sold individually A1718108001.70
99.BTC.373033417HD
Western Star Front Shocker Arm Replacement.
APPLICATION AND
PART NO: DIMENSIONS
GENERAL INFORMATION
O.D =100.0mm
Hole Dia. = 25.6mm
Neway/Holland - Bushing Beam Center
Boss O.D= 100.0mm
09.1671.08 Bar Pin Style 90508012 To Suit AD-
Boss Width = 126.0mm 126/252/378 Shaft
Centre to Centre =
215.90mm
Across Flats=57.0m
OD = 76.35mm
Bush Length = 64mm
Hendrickson Torque Rod Bush
09.1659.18 Bolt Hole = 20mm
Replaces: 45477.001L, Atro IN35180
Center to Center =144mm
OD = 78.15mm
99.IVECO.9 Iveco Stralis
Width = 63.22mm
7384377 Front Cab Pivot Bush
ID = 15.85mm
OD = 60.60mm
Iveco Front Bushing
ID = 22.60mm
09.1905.08 Replaces
Length = 117mm
Iveco HD 40432-000
OD = 46.6mm
Iveco Bush Airtec Spring
ID = 19.65mm
09.1906.8 Replaces
Length = 107mm
Iveco HD 40443-000
OD = 79.5mm
International Acco F1, F2, & F5 4 x 4
Width = 48.4mm
99.ACCO.08 Ex-Army Truck Straddle Mount
Overall Length = 137mm (inc tapered Assembly
pin
Straddle Bush
Assembly
09.1660.08 19.5 84 68 116 24
Volvo . V – Rods
Replacement
ID = 24.20mm
Volvo Front Axle Leaf
98.20592656 24.20 62 80 Overall Length = Spring Bush
96mm
09.1501.28 Heavy Duty Mack Lightweight, 38,000 Ib and Heavyweight - Straddle Mount
09.1509.08 For MAN. Bus (80mm O.D. Bush). Replaces: MAN. 81-43230-6043
09.1510.08 For MAN. (85mm O.D. Bush) and 86 Model Volvo . Replaces: MAN. 81-95302-0059
09.1511.08 For Mercedes Bus (80mm O.D. Bush). Replaces: Mercedes A-000-586-14-33
09.1516.08 Rockwell - Small O.D. Boss - Straddle Mount Replaces: Rockwell: A-2297 -H-1 048
09.1517.08 Mack, Neway AD. 252-11 and Rockwell- Straddle Mount . Replaces: Mack: 38QF29407M
09.1517.18 Non – Repairable Mack, Neway AD. 252-11 and Rockwell- Straddle Mount .Replaces: Mack: 38QF29407M
09.1517.28 Mack, Neway AD. 252-11 and Rockwell- Tapered Shaft. Replaces: Mack: 38QF29408M
Non – Repairable. Rockwell - Large O.D. Boss - Small Shaft - Straddle Mount
09.1519.18 Replaces: Rockwell: A-2297 -L-1 052 , Rockwell: A-2297 -P-3162 Rockwell: A-2297-Q-17A
Mack, Neway AD. 252-11, Rockwell and Western Star - Large O.D. Boss - Large Shaft - Straddle Mount
09.1520.08 Replaces: Mack: 38QF29402M, Rockwell: A-2297-D-82A, Rockwell: A-2297-X-3664
Non- Repairable Mack, Neway AD. 252-11, Rockwell and Western Star - Large O.D. Boss - Large
09.1520.18 Shaft – Straddle Mount. Replaces: Mack: 38QF29402M, Rockwell: A-2297-D-82A, Rockwell: A-2297-X-3664
09.1520.28 Mack and Neway AD. 252-11 - Tapered Shaft. Replaces: Mack: 38QF29403M
09.1521.08 Kenworth - Standard - Straddle Mount. Replaces: Kenworth:K066C259 , Rockwell: A-2297 -R-18A
09.1521.18 Non- Repairable Kenworth - Standard - Straddle Mount. Replaces: Kenworth:K066C259 , Rockwell: A-2297 -R-18A
09.1650.08 Replaces: Kenworth C13-6001 Airglide 380. ATRO SU00-29001 Spring Link Bushing
Non – Repairable. Replaces: Kenworth 227720: Airglide 100, Glide Ride, 4 Bag Airglide, ‘Big 6” for use in stabiliser
bar.Kenworth 836940: Airglide 200/400/460/690 International 1693061C1: Corporate Four Springs, 8100/9200
09.1651.18 Single Axle, Corporate Air Hendrickson 44695, Mack 1688-227720: SS34/38, ST34 Taper Leaf, Mack 240530
(SS44, SW557, SW5573 Camelback
Mack Tapered Straddle Mount Pin Assembly. Replaces ATRO TT38000A, TT38000, Neway 229610, Arvin
09.1656.28 MeritorR302228, R308651, Euclid E-2228, E-8651, GAFF 13518, 13533, Hendrickson 44697, 64400-004L, Kenworth
229610
2 Inch 3/4 Straddle Assembly Suits Mack Torque Rod And Swaybar Bar Straddle Bushing
98.1688.227720 Replaces ATRO TS38000 & TS38095
99.48423.08 Front of Rear Shackle Bush & Pin Assembly 85mm Mitsubishi / Fuso
E
B C D
A SHAFT
BOSS BOSS SHAFT APPLICATION AND
PART NO. INCLUDES SHAFT ACROS
O.D. WIDTH HOLE GENERAL INFORMATION
HOLE DIA. S
TO
FLATS
HOLE
Non-Repairable Bush
09.1522.18 Non – Repairable Poly Bush 19.1 105.1 52.0 110.0 32.0 (as above 09.1522.08).
Replaces:
1. 09.1650.03
Kenworth C13-6001 Airglide 380
2. 09.1651.04
09.1650.08 3. 09.1650.06 16.6 60.33 62.98 111.0 25.1
ATRO SU00-29001 Spring Link
4. 09.1650.09
Bushing
Replaces:
1. 09.1653.04F
Mack
2. 09.1653.05 F
09.1653.08 18 76.2 61.95 111.0 29 ATRO: TS46000
3. 09.1651.03
E
B C D
A SHAFT
BOSS BOSS SHAFT APPLICATION AND
PART NO. INCLUDES SHAFT ACROS
O.D. WIDTH HOLE GENERAL INFORMATION
HOLE DIA. S
TO
FLATS
HOLE
1. 71.058.10.125 Bolt(1)
For Mack and
2. 70.111.10 Washer (1)
Neway AD. 252-11
3. 09.1520.26 Washer (1)
1-1/4” Suspensions
4. 09.1521.05 Boss Outer (1)
09.1520.28 200.0 104.7 63.5 12 TPI 73.8 35.3
5. 09.1521.06 Washer (2)
UNF Replaces:
6. 09.1521.09 Bush-Red (2)
Mack
7. 09.1520.23 Shaft (1)
38QF29403M
8. 38.130.085 Circlip (1)
9. 71.611.20 Nyloc Nut(1)
International
Outside Dia. = 66mm
09.1533.09 Heavy Duty Bush Polyurethane A90
Overall Width= 57mm
Colour: Red
• You only need to stock 2 types of bushing for all trucks which means that you don’t have to carry heaps of stock
with you & have a reduced cost of spare parts. Applicable to approx 80% of Torque Rods – excludes taper pins.
Our torque rods can be customised to suit Japanese, European and American Models, and also be customized for race,
transport & retail.
A E
D
SHAFT SHAFT
PART NO. INCLUDES SHAFT APPLICATION AND GENERAL INFORMATION
HOLE ACROSS
HOLE TO
DIA. FLATS
HOLE
CAMSHAFT NUT
APPLICATION AND
PART NO. REPLACES AND INCLUDES GENERAL
INFORMATION
102.0mm I.D.
For Kenworth Big 6 Truck Spring
09.7972.9 127.0mm O.D. suspensions
125.0mm Length
If you detect any errors in this catalogue, we would appreciate it if you let us know, as we want this
information to be as accurate as possible.
Notes