Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • Proposed 6 Hole Logging String

    Uploaded by

    Yaqoob Ibrahim
    42 views4 pages
    This document summarizes four well logging tool string runs. It provides details on the tool string configuration, individual tool specifications, maintenance status, and remarks for each run. Key details include total length, maximum outer diameter, temperature ratings up to 350 degrees Fahrenheit for most tools, which tools have flask protection or backups available, and heat check/maintenance status for each tool.

    Original Description:

    Original Title

    Proposed 6 hole logging String

    Copyright

    © © All Rights Reserved

    Available Formats

    DOC, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    Report this Document
    This document summarizes four well logging tool string runs. It provides details on the tool string configuration, individual tool specifications, maintenance status, and remarks for each run. Key details include total length, maximum outer diameter, temperature ratings up to 350 degrees Fahrenheit for most tools, which tools have flask protection or backups available, and heat check/maintenance status for each tool.

    Copyright:

    © All Rights Reserved
    Download as DOC, PDF, TXT or read online from Scribd
    Flag for inappropriate content
    Download as doc, pdf, or txt
    42 views4 pages

    Proposed 6 Hole Logging String

    Uploaded by

    Yaqoob Ibrahim
    This document summarizes four well logging tool string runs. It provides details on the tool string configuration, individual tool specifications, maintenance status, and remarks for each run. Key details include total length, maximum outer diameter, temperature ratings up to 350 degrees Fahrenheit for most tools, which tools have flask protection or backups available, and heat check/maintenance status for each tool.

    Copyright:

    © All Rights Reserved
    Download as DOC, PDF, TXT or read online from Scribd
    Flag for inappropriate content
    Download as doc, pdf, or txt
    of 4

    Run 1.

    DLT-DSI-EMS-SGT-SP

    Tool String Tool Stats

    Total Length 38.46 m


    Max. OD 4.625 in
    Zero to First reading 4.62 m
    Temp. Rating 350 DegF*

    * 1 hour rating. Some of the tools ratings


    in the string are higher.

    Maintenance status / backup

    Tool QC / Backup Flask


    HC
    DLT Yes Yes Yes
    DSI Yes Yes No
    EMS Yes Yes Yes
    SGT Yes Yes Yes
    GPIT Yes Yes Yes
    DTA Yes Yes Yes
    DTC Yes Yes Yes
    QC: Q-Check, HC: Heat check

    Remarks

     Eccentralized String with ½’’ stand-


    offs.
     Flask is protecting the electronics
    section on each mentioned tool. This
    extends temperature protection up to
    500 DegF in some cases.
     DSI flask is not existent. Tool is
    rated 350 DegF and recently Q-
    checked.
     All tools not flasked are extensively
    heat checked.
     All the tools that are flasked are not
    heat checked.
    Run 2. LDT-CNT-MSFL-LDS-HNGS

    Tool String Tool Stats

    Total Length 33.68 m


    Max. OD 4.5 in
    Zero to First reading 0.99 m
    Temp. Rating 350 DegF*

    * 1 hour rating. Some of the tools ratings


    in the string are higher.

    Maintenance status / backup

    Tool QC / Backup Flask


    HC
    LDT Yes Yes Yes
    CNT Yes Yes No
    MSFL Yes Yes Yes
    LDS Yes Yes Yes
    HNGS Yes NGT No
    GPIT Yes Yes Yes
    DTA Yes Yes Yes
    DTC Yes Yes Yes
    QC: Q-Check, HC: Heat check

    Remarks

     Eccentralized String
     Flask is protecting the electronics
    section on each mentioned tool. This
    extends temperature protection up to
    500 DegF in some cases.
     CNT rating is 400 DegF.
     LDT/LDS main tool uses HT
    Detectors (rated 400 DegF). Backup
    uses standard ones (350 DegF)
     LDS tool will be run if required after
    first run
     MSFL is running new HT pad
     All tools not flasked are extensively
    heat checked.
     3 knuckle joints used for decoupling.
     GPIT is aligned with LDS and
    HNGS and is 90 DEG off with the
    rest of tool.
    Run 3. Slim FMS-GR

    Tool String Tool Stats

    Total Length 15.53 m


    Max. OD 4.5 in
    Zero to First reading 0.46 m
    Temp. Rating 350 DegF*

    * 1 hour rating. Some of the tools ratings


    in the string are higher.

    Maintenance status / backup

    Tool QC / Backup Flask


    HC
    FMS Yes FMI No
    SGT Yes Yes Yes
    GPIT Yes Yes Yes
    DTA Yes Yes Yes
    DTC Yes Yes Yes
    QC: Q-Check, HC: Heat check

    Remarks

     Centralized String
     Flask is protecting the electronics
    section on each mentioned tool. This
    extends temperature protection up to
    500 DegF in some cases.
     Slim FMS rating is 350 DegF.
     No backup for this tool was
    available in the area. FMI / UBI will
    be available if required.
     All tools not flasked are extensively
    heat checked.
    Run 4. Slim RFT-GR

    Tool String Tool Stats

    Total Length 14.65 m


    Max. OD 3.325 in
    Zero to probe 0.4 m
    Temp. Rating 350 DegF*

    * 1 hour rating. Some of the tools ratings


    in the string are higher.

    Maintenance status / backup

    Tool QC / Backup Flask


    HC
    SRFT Yes MDT No
    SGT Yes Yes Yes
    DTA Yes Yes Yes
    DTC Yes Yes Yes
    QC: Q-Check, HC: Heat check

    Remarks

     Eccentralized String
     Flask is protecting the electronics
    section on each mentioned tool. This
    extends temperature protection up to
    500 DegF in some cases.
     Slim RFT rating is 350 DegF.
     No backup for this tool was
    available in the area. MDT will be
    available if required.
     All tools not flasked are extensively
    heat checked.

    You might also like