EH1100-3

Dump Truck
Nominal Payload with Standard Equipment : 59.0 tonnes (65.0 tons)
Maximum GMW : 110 677 kg
Engine : MTU Detroit Diesel 12 V Series 2000
Rated Power 567 kW (760 HP)
Engineered for Performance,
Designed for Comfort,
and Built to Last.
Hitachi Technologies
Hitachi Trucks, like Hitachi Excavators are designed and manufactured
using cutting edge technology. Trucks designed by Hitachi using Hitachi
Electronic devices result in great electrical system reliability, efficiency and
control.

High-Powered Engine
Strong, reliable power is provided by the MTU Detroit Diesel 12 V Series
2000 diesel engine. This engine features the latest in diesel engine devel-
opment providing low fuel consumption while meeting the emission regu-
lations of U.S. EPA Tier 2 and EU Stage II.

Long Frame Life

Frame rails are tapered from front to rear to distribute the load evenly over
the entire length of the chassis. In place of castings, cold rolled steel is
used as it is known to be more homogeneous and easier to repair. Weld
joints are oriented longitudinally to the principal flow of stress for strength
and long life. Proven design and manufacturing methods with state-of-
the-art ultrasonic testing ensure a quality product.

Unique Body Design

The single sloped floor evenly distributes material shedding during dump-
ing. A continuously exhaust-heated body reduces carry-back of material,
and muffles exhaust. Horizontal floor and side rail stiffeners distribute load
shocks evenly over the entire body length, minimizing stress concentra-
tions in any one area. Closely spaced floor stiffeners reduce wear due to
impact loading.

Well Matched: EH1100-3 & Excavators

Excavator ZX870LCH-3 EX1200 -5D (BH) EX1200 -5D (LD) EX1900 -5 (BH)

Boom 7.1 m - BE Boom 8.4 m - H Boom 9.1 m - Boom 7.55 m - BE Boom - 11.8 m - Boom

Arm 2.95 m - BE Arm 3.7 m - H Arm 3.4 m - Arm 3.4 m - BE Arm - 5.5 m - Arm

Bucket Capacity
4.3 m3 3.5 m3 5.0 m3 6.5 m3 6.5 m3 4.8 m3
(SAE, PCSA heaped)

Passes 8 10 7 5 5 7

 
Rugged Construction
Technologically Advanced
The EH1100 -3 is designed to develop
low cycle times and extra efficiency in
the heavy duty applications of quarrying
and mining. This truck provides low op-
erating costs, unparalleled productivity
and overall quality through its superior
structure and systems designs.

Robust Frame
Full fabricated box section main rails
with section height tapered from rear
to front. Wider at the rear to support
Fully Hydraulic Brake
the loads and narrower at the front to 400 BRINNELL STEEL
allow for engine accessibility. One piece The fully hydraulic brakes feature high
top and bottom flanges that eliminate Reinforced Body reliability, durability and serviceability.
cross member tie in joints and provide a Optimum brake force yields maximum
Built for quarry and mining applications,
large exposed center area for access to available braking under tough ground
the EH1100 -3 body uses a 18 mm floor
major components. Large radii at frame conditions for best control. Unique vari-
plate and 8 mm side plates made of 400
junctions are blended and ground to able front to rear brake proportioning
BHN high-tensile steel. This provides
minimize stress concentrations. Weld maximizes stop performance under
high resistance to wear and impact. A
joints are oriented longitudinally to slippery road conditions.
low loading height and large target area
the principal flow of stress for greater
allow easy, quick loading by a variety of
durability and more strength. Frame
loading tools.
utilizes 345 MPa yield high strength low
alloy steel that is robotically welded to
ensure consistently high quality welds.

 
Ease of Operation
Superior Suspension
Spindle
The Hitachi ACCU-TRAC suspension Each spindle is controlled by a hydraulic
system delivers excellent maneuverabil- steering cylinder, rotates around the king-
ity, even at higher speeds. The trailing pin and the outer end of the trailing arm
to position the wheels for steering. The
arm layout offers greater ease of servic-
spindles are attached by one tie-rod.
ing while improving truck performance
compared to suspended king-pin de-
Both Struts at normal height
signs. The pivot mounting of the trailing
arm design allows only axial input to the
strut and allows wheel movement to the King-Pin
vertical plane only. Retains the spindle to the trailing arm.
Spindle rotates around the king-pin, which
Features: is locked in position. The Neocon-E strut
attaches to the top.
Lateral forces that act on the front
wheels are minimized, resulting in
reduced tire scuffing.
Dynamic friction (side-wall force)
within the strut is low due to the fea- Trailing Arm
tures of the ACCU-TRAC design, Both struts in compression Main suspension member to which other
allowing the use of a lighter strut suspension components are attached.
engineered to a smaller diameter and The trailing arms hinge on a torque tube
longer stroke. that is clamped to the front of the frame.
The necessary frame bulk (horse-
collar structure) needed to mount a sus-
pended king-pin is non-existent.
The elimination of the “horse-collar” Neocon Strut
member provides greater engine The energy absorbtion and release com-
access. ponent of the ACCU-TRAC suspension
The NEOCON strut used with the system. Pinned to ball bushings at the
ACCU-TRAC suspension, improves frame and at the top of the king-pin to pre-
Drivers Side Strut in compression,
operator and component isolation, other strut in extension vent bending movements from transferring
to the strut. Receives only axial input.
provides better hauler stability and
predictable operational control.
HI-TECH ROPS / FOPS Cab Locating the king-pin close to the
wheel assembly and at a slight angle With no horizontal deflection
The new Hi-TECH (Hitachi Technology) results in low “Dry Park Steering” effort.
ROPS/FOPS Cab features a center Development of the compressible
integrated, “flat panel” style dashboard media, NEOCON-E TM fluid (propri-
that positions the display and controls etary, silicone based, environmentally
within close view of the road ahead. The friendly) for use in the suspension strut Trailing Arm Suspension (Front)
cab uses double-wall construction and with Helium gas, results in an improved
a 3-point rubber iso-mount to absorb energy absorption (isolation) system
shocks and noise. The new high pow- and an improved energy release (stabil-
ered heater provides ample BTU's for ity) system that responds favorably
all enviroments and working conditions. whether traveling empty or with payload
The new Hitachi controller, built by in a wide range of ambient tempera-
Hitachi and also used in excavators, will tures.
perform its function of processing input
and output information with reliability
during the most rigorous haul cycle.
The ACCU-TRAC suspension design NEOCON Strut (Front/Rear)
allows the front struts to be removed
and installed without removing the trail-
Helium gas
ing arms, brakes or tires. This relates
to fewer tools and less labour required NEOCON-E TM fluid
to perform the repair, which aims to
Auto-Lubrication System (Optional)
reduce the amount of hauler downtime,
A pump fed system automatically ap- increasing productivity.
plies grease to lube points via plumbing.
The lubricant is automatically delivered
in time controlled and metered quanti- Impact
ties to all connected lube points in the
system

Auto Lubricator Controller

 
SPECIFICATIONS

ENGINE TIRES STEERING SYSTEM Retarder

Foot-operated valve controls all-hydraulic actuation of oil-cooled wet
Model������������������������� MTU Detroit Diesel 12 V Series 2000 Front��������������������������� 24.00 R35(**) (Standard) Closed-center, full-time hydrostatic steering system using two double-acting
disc brakes on rear axle. System provides modulated pressure to rear
Type��������������������������� 4 Cycle, V12, diesel injection Rear���������������������������� 24.00 R35(**) (Standard) cylinders, pressure limit with unload piston pump and brake actuation/
brakes for constant speed control.
Emission Certification� U.S. E.P.A Tier 2, E.U. Stage II steering system reservoir. An accumulator provides supplementary steering
Rim Width������������������� 432 mm (17 in)
in accordance with SAE J1511 and ISO 5010. The Operators steering
Aspiration������������������� Turbocharged / Aftercooled Optional tires and tread patterns may be available. Continuous 656 kW (880 HP)
wheel offers 35 degrees of tilt and 57.2 mm of tilt travel.
Rated Power Intermittent 1 268 kW (1 700 HP)
SAE J1995, gross�� 567 kW (760 HP) at 2 100 min-1(rpm) Certain job conditions may require higher TKPH(TMPH) in order to Steering Angle 39 degrees
SAE J1349, net������ 520 kW (698 HP) at 2 100 min-1(rpm) maintain maximum production. Hitachi recommends evaluating the Load/Dump Brake Apply
Turning Diameter: (SAE) 19.28 m
ISO 9249, net��������� 520 kW (698 HP) at 2 100 min-1(rpm) job conditions and consulting the tire manufacturer to make proper tire Through activation of a switch by the operator, a solenoid is energized,
Steering Pump Output* 95.7 L/min sending full brake pressure to apply the rear Wet Disc brakes. For use
EEC 80/1269, net�� 520 kW (698 HP) at 2 100 min-1(rpm) selection.
System Pressure 18.9 MPa during the load and dump cycles.
Maximum Torque�������� 3 091 N·m (315 kgf·m) at 1 350 min-1(rpm) *Steering Pump Output (at 2 100 min-1(rpm))
Piston Displacement��� 23.9 L ELECTRICAL SYSTEM
HI-TECH ROPS / FOPS CAB
Bore and Stroke��������� 130 x 150 mm Twenty-four volt starting, lighting and accessories system. Seventy-five
HYDRAULIC SYSTEM Hi-Tech ROPS / FOPS Cab
Torque Rise���������������� 20 % ampere alternator with integral transistorized voltage regulator. Two 12 V
heavy duty batteries capable of 1300 cold cranking amps, each, at -17 Two 2-stage, double-acting cylinders, with cushioning in retraction, ROPS complies with ISO 3471 and SAE J1040-May 94. FOPS complies
Starting���������������������� Electric
degree C (0 degree F). A Hitachi solid state reprogrammable controller inverted and outboard mounted. Separate Hoist/Brake Cooling reservoir with ISO 3449. Double wall construction of 11 gauge inner and outer steel
controls and monitors hauler systems, provides output information to and independent tandem gear pump. Control valve mounted on reservoir. panels, lends itself to a more structurally sound cab. Multiple layered floor
TRANSMISSION control gauges and lights and incorporates connections for diagnostic mats act to absorb sound and control interior temperature.
Model�������������������������� Allison H6610A tools. Body Raise Travel 60 degrees A properly maintained cab from Hitachi, tested with doors and windows
Body Raise Time (at 2100 min-1(rpm)) 12.0 s closed per work cycle procedures in ISO 6394: 1998 (dBA), results in an
Design������������������������� Fully automatic, planetary type with integral
Body Down Time (at idle) 16.0 s operator sound exposure Leq (Equivalent Sound Level) of 81 dB(A).
lock-up converter BODY CAPACITY
Brake Cooling Pump Output (at 2100 min-1(rpm)) 176 L/min A three-point rubber iso-mount arrangement to the deck surface
Mounting/Position������� R e m o t e f ro m e n g i n e a n d re a r a x l e f o r m3 minimizes vibration to the operator compartment.
serviceability Struck (SAE) 28.2 Hoist Pump Output (at 2100 min-1(rpm)) 468 L/min
Ranges����������������������� 6 forward, 2 reverse Heap 3 : 1 35.2 System Relief Pressure* 17.2 MPa Excellent Serviceability
Control������������������������ Allison CEC2 electronics shift system with *System Relief Pressure (Hoist)
Heap 2 : 1 (SAE) 38.7 A removable front panel allows easy access to service brake valves,
SEM (Shift Energy Management) Body capacity and payload subject to change based on customer retarder valve and heater assembly. A removable cover located behind
BRAKE SYSTEM the operators seat provides easy access to the Transmission Contoller
specific material density, options and application.
Maximum Speeds @Governed Engine Speed with standard Brake system complies with SAE J1473/ISO 3450. (TCU), Central Contoller (CCU) and all electrical junction points.
24.00R35(**)E4 tires WEIGHTS (Approximate)
All-hydraulic actuated braking system providing precise braking control Comfort and Ease of Operation
Standard Weights given are for standard options, standard body and tires. and quick system response. The Hitachi brake controller has a unique A flat panel style dashboard positions controls within easy reach and
Final Drive Net machine weight changes will directly affect the payload. variable front to rear brake proportioning that maximizes the stopping visual contact. A full complement of easy-to-read gauges, automobile type
Differential 3.64 : 1 Material density will determine body volume figures. performance under all road conditions. monitor with warning system, a spacious environment, multiple position
Planetary 5.80 : 1 adjustable seat, tilt/telescopic steering wheel, filtered cab ventilation and
kg Service door locks all contribute to operator convenience, control and comfort.
Gear Ratio km/h
Chassis with Hoist 33 325 All-hydraulic actuated front disc brakes and rear oil-cooled wet disc.
1 4.00 9.7
Body 12 488
2 2.68 14.5
Net Machine Weight 45 813 WET DISC BRAKE
3 2.01 19.3
Maximum GMW* with Std. Tires [24.00 R35 (**) E4] 110 677 The Hitachi wet disc brake is engineered for long service life even in the
4 1.35 28.8
most extreme environments. The wet disc brakes are located on the rear
5 1.00 38.8 *This specification is not to be exceeded and includes all options,
axle and provide service braking, secondary braking, and retarding. The
6 0.67 57.9 customer installed attachments, 50% fuel, with operator and payload.
brakes are a multi-plate design, and continuously oil-cooled. The sealed
R1 5.15 7.6 design protects against environmental contamination for prolonged service
Payload with Standard Equipment 64.9 tonnes (71.5 tons)
R2 3.46 11.3 life. The wet disc brake is designed with automatic retraction to prevent
drag. Separate pedals activate the service braking and retarding functions.
Note: Nominal Payload on front cover shows 100/110 of Payload with
DRIVE AXLE Standard Equipment. Front Axle - Dry Disc
Model Differential��������� 2354 Disc Diameter Each (2 discs/axle) 686 cm
Major Options Brake Surface Area Per Axle 4 129 cm2
Axle Design����������������� Full floating axle shafts using a model 2354
The following list of options (not limited to) is an example of what will Lining Area Per Axle 2 787 cm2
differential and single reduction planetaries at
change the net machine weight. Brake Pressure (Max.) 15.8 MPa
each wheel
Automatic Fire Suppression
Traction Control����������� An optional electronic feature that includes the Body Liner, heavy duty and partial
Electronic Downhill Speed Control feature Rear Axle - Oil-Cooled Wet Disc
Deck Mounted Muffler Brake Surface Area Per Axle 59 616 cm2
Differential and Final Drive Ratios
Brake Pressure (Max.) 4.8 MPa
Ratios Standard Weight Distribution Front Rear
Differential 3.64 : 1 Empty 50 % 50 % Secondary
Planetary 5.80 : 1 Loaded 34 % 66 % Two independent circuits within the service brake system provide back-
Total Reduction 21.11 : 1 up stopping capability. System is manually or automatically applied to
Maximum Speeds stop machine within prescribed braking distance.
with 24.00R35 tires 57.9 km/h
Parking
Dry disc mounted on differential input shaft. Controlled by a toggle
switch on the dash. Automatically applied if brake hydraulic pressure is
lost.

Size (Diameter) 597 mm

 
SPECIFICATIONS Equipment & Dimensions

SUSPENSION The horizontal stiffener design of the Hitachi CAB OPTIONAL EQUIPMENT
body minimizes stress concentrations in any Air filtration/replaceable element Quick connect test ports
Front and Rear Suspension one area. Load shocks are dissipated over CAB
Ash tray Roll down operator window
For years, Hitachi haulers have enjoyed an industry-wide reputation for the entire body length. Active Traction Control (ATC) w/ Circuit Breakers in place of fuses
Cab interior light Rubber floor mat
superior suspension systems. That experience and knowledge has now The closely spaced floor stiffeners provide Electonic Downhill Speed DC - DC, 24 to 12 V convertor
Cigar lighter, 24 volt Safety glass
been pushed to the next level, to develop the truly advanced ACCU- additional protection by minimizing distance Control (EDSC) Electric RS and LS power windows
Door locks Seat belts, retractable
TRAC suspension for the EH1100-3. To make sure it was fine tuned to between unsupported areas. Air conditioning HAULTRONICS III load monitoring
Foot rest, left Seat, mechanical, adjustable,
the limit, Lotus Engineering, a world leader in suspension design, was Air suspension seat w/ lumbar system
Heater and defroster multi-position
contracted to review the entire system to assure optimized ride and Air suspension seat, semi-active, Hill hold brake
Integral ROPS/FOPS cab Sunvisor
handling performance. w/ heat, w/ lumbar, 3 point seat Speakers, antenna and wiring only
Integrated engine diagnostics Tilt/telescoping steering wheel
belts Trainers seat
connector Tinted glass, all windows
The ACCU-TRAC suspension system features independent trailing arms AM-FM radio w/ CD
Integrated transmission 12 volt accessory connection
for each front wheel with NEOCON struts, containing energy absorbing
diagnostics connector Windshield washer
gas and compressible NEOCON-E™ fluid, mounted between the king
ISO driver envelope Windshield wiper, intermittent
pins and the frame. This arrangement allows a wider front track that
SERVICE CAPACITIES Modular instrumentation
provides a better ride, improved stability and a reduced turning circle. CHASSIS
The rear axle housing has an A-frame mounting. The rear NEOCON L
5 piece rims Fluid drain kit - FEMCO
struts are mounted in a more vertical position which allows a more pure Crankcase (includes filters) 83.3
Additional backup lights - halogen, Fluid sampling points
axial loading and reduces the tractive and braking forces transmitted to Transmission, Cooler and Lines 93.3
INDICATOR LIGHTS mudguard mounted Fog lights
the nose cone. Cooling System 224.5
Battery charge Filter restrictions Additional backup lights - HID, Front underview mirror
Fuel Tank 700
Body up High beam mudguard mounted Ground level engine shutdown
NEOCON struts outperform competitive strut designs by improving Hydraulics
Brake system oil pressure Parking brake applied Ansul fire suppression, manually Hi-lite green paint
isolation, stability, and control. Improved isolation means reduced Hoist Tank and System 256
Central warning (caution) Steering oil pressure actuated Lube system, centralized
impact loading on the structural members of the machine and greater Steering Tank and System 112
Central warning (stop) Steering oil temperature Body liners (400BHN) plates, Lube system, Groeneveld
operator comfort, resulting in longer equipment life and increased Drive Axle (2 wheels and differential) 103
Engine coolant level Transmission malfunction medium heavy duty or partial Lube system, Lincoln
productivity. Improved stability means more consistent dynamic response Windshield Washer Fluid 5.7
Engine oil pressure Transmission oil pressure Canopy spill guard extension Premium light package (HID
of the machine to fluctuating load energy, resulting in predictable Cold weather package headlights, LED marker lights)
Engine, other malfunctions Turn signal / hazard
machine performance. The improved control means better machine Mild cold weather package Rear view camera
maneuverability. (0 deg C to -20 deg C) Rock cap
(32 deg F to -4 deg F) Service center
The Hitachi frame and ACCU-TRAC suspension system are designed Extreme cold weather package Side extensions
to work in unison to provide maximum structural integrity and operator GAUGES
Brake oil temperature Odometer (-20 deg C to -35 deg C) Side Mudguards, mounted to cab
comfort. The fabricated rectangular frame rail construction provides (-4 deg F to -31 deg F) deck
superior resistance to bending and torsional loads while eliminating Convertor oil temperature Speedometer
Engine coolant temperature Steering / brake oil pressure Electrically heated mirrors Spare rim
unnecessary weight. The unique ACCU-TRAC independent trailing arm Engine access step Spare tire with rim
suspension absorbs haul road input, minimizing suspension-induced Fuel guage Tachometer
Hourmeter, engine Engine compartment lights Tires (type & rating)
frame twisting while providing independent tire action. Extra reverse light on light mount Transynd transmission fluid
NEOCON ride struts are mounted with spherical bushings, eliminating bracket Unit sound suppression
extreme sidewall forces by ensuring a purely axial input to the ride strut. Fire extinguisher, deck mounted
The wide track stance of the ACCU-TRAC suspension system and the
long wheel base assure a more stable, comfortable ride. MACHINE LIGHTS
Back-up light Stop & tail (2)
STANDARD EQUIPMENT Clearance light - front (2) Amber turn signals and four-way MISCELLANEOUS
BODY
Clearance light - rear (2) flashers Extra operators manual Service Manuals - hardcopy
The body has been made to the flat floor, flat tail chute design. GENERAL
Halogen head lights (4) Extra parts manual - hardcopy
The rear hinge has been designed to cause the hinge pin to float when ACCU-TRAC suspension system Ground level auxilliary start receptacle
the body is in the fully lowered position. All-hydraulic braking Guard rails
The weight of the body and payload is distributed across rubber body Allison H6610A automatic Hoist interlock
pads that are evenly spread across the length of the body rail-box that transmission Hoist tank sight guage Standard and optional equipment may vary from country to country. Special options
rests on the truck frame. Battery disconnect switch ISO decals provided on request. All specifications are subject to change without notice.
Thickness: Body down cushioning Load/dump brake
Body down indicator Mirrors, left and right, hand Note: Dimensions shown are for empty machine with 24.00R35(**)E4 tires.
mm (in) Body up speed restriction adjustable
Floor 18 (0.69) Canopy spill guard Mud flaps
unit : mm
Front 10 (0.38) Continuous body heating NEOCON-E suspension struts
Sides 8 (0.31) Cooling system sight guage Park brake - dry disc
Canopy 6 (0.25) Cooling system surge tank Park brake interlock
Driveline guard, front Radiator grille guard 4 440

Optional Body Liners (Medium Duty) Electric horns Reverse alarm and light 9 450 4 240
Floor & Corners 10 (0.38) Electric start Rock ejector bars 4 980
6 830 3 940
Sides & Front 6 (0.25) Electronic hoist Steering accumulator 4 450

End Protection 10 (0.38) Engine belt protection Steering tank sight guage

8 890
1 600 60
Optional Body Liners (Heavy Duty) Fan guard Tires 24.00 R35
Floor & Corners 13 (0.50) Fenders Tow points, front
Sides & Front 8 (0.31) Fixed steering stops Transmission guard
End Protection 10 (0.38) Front brake cut-off switch Transmission sight guage

4 620
Optional Partial Liner (Heavy Duty) Fuel tank level guage Two speed reverse

4 140

3 760
Floor & Corners 13 (0.50)
End Protection 10 (0.38)
Optional Rock Cap
Top of the Body Side Plate 10 (0.38)
790 610 2 690 740 635
2 790 4 320 3 050 1 450
2 310
3 530 3 050
4 240 4 420

10 11
Performance Data
VEHICLE WEIGHT VEHICLE WEIGHT
50 100 150 100 250
kN ( ) 00
lb
x
kg x 1 000
kN ( ) 00
lb kg x 1 000

--

-
x

--

-
-

-
-

-
-

-
-

-
-

-
-
-

-
1 000 40 80 120 160 200 240 280 320 360 400 ( lb x 1 000 ) 1 000 50 100 150 200 250 300 350 400 450 500 (lb x 1 000)
100- 25 100- 20
400- 90- PERFORMANCE CHART 400- 90- NMW MAX RETARDER CHART 18
NMW EH1100-3 GMW EH1100-3
80- @ 567 kW 760 HP 20 80- Grade Length Continuous 16
70- 70- 14
300- 300-

GRADE IN %
GRADE IN %
60- MAX 15 60- 12

RIMPULL
RIMPULL

1ST
50- GMW 50- 10
200- 200- 2ND
40- 10 40- 8
3RD
30- 30- 4TH
6
100- 20- 100- 20- 5TH
5 4
6TH
10- 10- 2
0- 0- 0 0- 0- 0
(mph) 0 5 10 15 20 25 30 35 40 45 50 (mph) 0 5 10 15 20 25 30 35 40 45 50
-

--

--
-

--
--

--
-

--

--

--
-

--
-

- -

-
-

-
-

-
-
km/h 0 10 20 30 40 50 60 70 80 km/h 0 10 20 30 40 50 60 70 80
VEHICLE SPEED VEHICLE SPEED

VEHICLE WEIGHT VEHICLE WEIGHT

100 250 100 250
kN ( ) 00
lb
x
kg x 1 000
kN ( ) 00
lb
x
kg x 1 000
--

--
-

-
-

-
-

-
-

-
-

-
1 000 50 100 150 200 250 300 350 400 450 500 (lb x 1 000) 1 000 50 100 150 200 250 300 350 400 450 500 (lb x 1 000)
100- 20 100- 20
400- 90- NMW MAX RETARDER CHART 18 400- 90- NMW MAX RETARDER CHART 18
GMW EH1100-3 GMW EH1100-3
80- Grade Length 450 m 1 500 ft 16 80- Grade Length 600 m 2 000 ft 16
70- 14 70- 14
300- 300-
GRADE IN %

GRADE IN %
60- 12 60- 12
RIMPULL

RIMPULL
1ST 1ST
50- 10 50- 10
200- 2ND 200- 2ND
40- 8 40- 8
3RD 3RD
30- 4TH
6 30- 4TH
6
100- 20- 5TH 100- 20- 5TH
4 4
6TH 6TH
10- 2 10- 2
0- 0- 0 0- 0- 0
(mph) 0 5 10 15 20 25 30 35 40 45 50 (mph) 0 5 10 15 20 25 30 35 40 45 50
--
-

--

--
-

--
--

--
-

--

--

--
-

--
-

-
-

-
-

-
-

-
km/h 0 10 20 30 40 50 60 70 80 km/h 0 10 20 30 40 50 60 70 80
VEHICLE SPEED VEHICLE SPEED
VEHICLE WEIGHT VEHICLE WEIGHT
100 250 100 250
kN ( )
lb
x
0 kg x 1 000
kN ( )
lb
x
0 kg x 1 000
--

--
-

-
-

-
-

-
-

-
-

-
1 000 0 50 100 150 200 250 300 350 400 450 500 (lb x 1 000) 1 000 0 50 100 150 200 250 300 350 400 450 500 (lb x 1 000)
100- 20 100- 20
400- 90- NMW MAX RETARDER CHART 18 400- 90- NMW MAX RETARDER CHART 18
GMW EH1100-3 GMW EH1100-3
80- Grade Length 900 m 3 000 ft 16 80- Grade Length 1 500 m 5 000 ft 16
70- 14 70- 14
300- 300-
GRADE IN %

GRADE IN %
60- 12 60- 12
RIMPULL

RIMPULL

1ST 1ST
50- 10 50- 10
200- 2ND 200- 2ND
40- 8 40- 8
3RD 3RD
30- 4TH
6 30- 4TH
6
100- 20- 5TH 100- 20- 5TH
4 4
6TH 6TH
10- 2 10- 2
0- 0- 0 0- 0- 0
(mph) 0 5 10 15 20 25 30 35 40 45 50 (mph) 0 5 10 15 20 25 30 35 40 45 50
--
-

--

--
-

--
--

--
-

--

--

--
-

--
-

-
-

-
-

-
-

km/h 0 10 20 30 40 50 60 70 80 km/h 0 10 20 30 40 50 60 70 80
VEHICLE SPEED VEHICLE SPEED

NOTES:
Diagonal lines represent total resistance (Grade % plus rolling resistance %).
Charts based on 0 % rolling resistance, standard power of engine, standard tires and gearing unless otherwise stated.
1. Find the total resistance on diagonal lines on right-hand border of rimpull or retarder chart.
2. Follow the diagonal line downward and intersect the NMW or GMW weight line.
3. From intersection, read horizontally right or left to intersect the rimpull or retarder curve.
4. Read down for machine speed.

These specifications are subject to change without notice.

Illustrations and photos show the standard models, and may or may not include optional equipment,
accessories, and all standard equipment with some differences in color and features.
Before use, read and understand the Operator’s Manual for proper operation.

Hitachi Construction Machinery

KR-EN001 06.08 (SA / KA,MT3)
www.hitachi-c-m.com
Printed in Japan