This 3 page document provides instructions for loading paper into the 250- and 550-sheet trays of a printer. It describes pulling out the tray, extending the length guide if needed, adjusting the length and width guides to the paper size, flexing and fanning the paper, loading it printable side up against the guides, and setting the paper size and type from the printer control panel.
This 3 page document provides instructions for loading paper into the 250- and 550-sheet trays of a printer. It describes pulling out the tray, extending the length guide if needed, adjusting the length and width guides to the paper size, flexing and fanning the paper, loading it printable side up against the guides, and setting the paper size and type from the printer control panel.
This 3 page document provides instructions for loading paper into the 250- and 550-sheet trays of a printer. It describes pulling out the tray, extending the length guide if needed, adjusting the length and width guides to the paper size, flexing and fanning the paper, loading it printable side up against the guides, and setting the paper size and type from the printer control panel.
This 3 page document provides instructions for loading paper into the 250- and 550-sheet trays of a printer. It describes pulling out the tray, extending the length guide if needed, adjusting the length and width guides to the paper size, flexing and fanning the paper, loading it printable side up against the guides, and setting the paper size and type from the printer control panel.
The printer has one 250-sheet tray (Tray 1) with an integrated manual feeder. The 250-sheet tray, the 650-sheet duo tray, and the 550-sheet tray support the same paper sizes and types and are loaded in the same way. CAUTION—POTENTIAL INJURY: To reduce the risk of equipment instability, load each tray separately. Keep all other trays closed until needed. 1 Pull out the tray completely. Note: Do not remove trays while a job is printing or while Busy appears on the display. Doing so may cause a jam.
2 If the paper is longer than letter‑size paper, then squeeze and then slide the length guide at the back of the tray to extend it.
2 Printing guide Page 2 of 3
3 Squeeze, and then slide the length guide tab to the correct position for the size of the paper being loaded.
Note: Use the paper size indicators on the bottom of the tray to help position the guide. 4 Squeeze, and then slide the width guide tab to the correct position for the size of the paper being loaded.
Note: Use the paper size indicators on the bottom of the tray to help position the guides. 5 Flex the sheets back and forth to loosen them, and then fan them. Do not fold or crease the paper. Straighten the edges on a level surface. Printing guide Page 3 of 3
6 Load the paper stack with the recommended printable side faceup.
7 Place the paper guides securely against the edges of the paper. 8 Insert the tray.
9 From the printer control panel, set the paper size and paper type in the Paper menu to match the paper loaded in the tray. Note: Mixing paper sizes or paper types in a tray may cause jams.
Setting the paper size and type
From the home screen navigate to:
> Paper Menu > Paper Size/Type > select a tray > select the paper size or type >
