Conforms to Regulation (EC) No.

1907/2006 (REACH), Annex II, as amended by Commission Regulation (EU)

2015/830 - United Kingdom (UK)

SAFETY DATA SHEET

Octamar (TM) BT-25
SECTION 1: Identification of the substance/mixture and of the company/
undertaking
1.1 Product identifier
Product name : Octamar (TM) BT-25
Product code : FS-000281
Internal code : 14024
Date of issue/ Date of revision : 2018-11-23
Date of previous issue : 2018-01-23
Version : 9
Product description : Mixture
Product type : Liquid.
1.2 Relevant identified uses of the substance or mixture and uses advised against
Identified uses
Petrochemical industry: Fuel additive. COMPANY NAME
COMPANY ADDRESS
EMERGENCY TELEPHONE
1.3 Details of the supplier of the safety data sheet
Supplier : Innospec Limited
Innospec Manufacturing Park
Oil Sites Road
Ellesmere Port
Cheshire CH65 4EY
United Kingdom
Telephone no.: : +44 (0)151 355 3611
Fax no. : +44 (0)151 356 2349
e-mail address of person : sdsinfo@innospecinc.com
responsible for this SDS
NON-emergency enquiries : corporatecommunications@innospecinc.com
1.4 Emergency telephone number
In Europe, Middle East, Africa, Asia Pacific and South America
24 hour / 7 day emergency response for our products is
provided by the NCEC CARECHEM 24 global network

The main regional centres are listed here in Section 1. Other local contact numbers for specific language
support in Asia Pacific are listed in Section 16.

Country information Emergency telephone Location

number
Europe ( all countries, all languages ) : +44 (0) 1235 239 670 London, UK
Middle East, Africa ( Arabic, French, English ) : +44 (0) 1235 239 671 Lebanon
Middle East, Africa ( French, Portuguese, English ) : +44 (0) 1235 239 670 London UK

Date of issue/Date of revision : 2018-11-23 1/21

Conforms to Regulation (EC) No. 1907/2006 (REACH), Annex II - United Kingdom (UK)
Octamar (TM) BT-25

SECTION 1: Identification of the substance/mixture and of the company/

undertaking
Asia Pacific ( all countries except China ) : +65 3158 1074 Singapore
China : +86 10 5100 3039 Beijing China
South America ( all countries except Brazil and Mexico ) : +1 215 207 0061 Philadelphia USA
Brazil : +55 11 3197 5891 Brazil
Mexico : +52 555 004 8763 Mexico
In USA, Canada and North America, 24 h/7 days of emergency response for our product is provided by the
CHEMTREC(R) Emergency Call Center based in the USA.

Country information : Emergency telephone number

USA : 800 424 9300
Canada, Puerto Rico, Virgin Islands : +1 800 424 9300
In case of difficulty using the toll-free number, or for : +1 703 527 3887
ships at sea, call
See section 16.
Indicates information that has changed from previously issued version.

SECTION 2: Hazards identification

2.1 Classification of the substance or mixture
Product definition : Mixture
Classification according to Regulation (EC) No. 1272/2008 [CLP/GHS]
Skin Irrit. 2, H315
Eye Irrit. 2, H319
Carc. 2, H351
STOT SE 2, H371
STOT SE 3, H336
Asp. Tox. 1, H304
Aquatic Chronic 2, H411
See Section 16 for the full text of the H statements declared above.
See Section 11 for more detailed information on health effects and symptoms.

2.2 Label elements

Hazard pictograms :

Signal word : Danger

Hazard statements : H319 - Causes serious eye irritation.
H315 - Causes skin irritation.
H351 - Suspected of causing cancer.
H304 - May be fatal if swallowed and enters airways.
H371 - May cause damage to organs.
H336 - May cause drowsiness or dizziness.
H411 - Toxic to aquatic life with long lasting effects.
Supplemental label : Contains tris(methylphenyl) phosphate. May produce an allergic reaction.
elements
Precautionary statements
General : Not applicable.

Date of issue/Date of revision : 2018-11-23 2/21

Conforms to Regulation (EC) No. 1907/2006 (REACH), Annex II - United Kingdom (UK)
Octamar (TM) BT-25

SECTION 2: Hazards identification

Prevention : P201 - Obtain special instructions before use.
P280 - Wear protective gloves: > 8 hours (breakthrough time): Viton®; 1 - 4 hours
(breakthrough time): nitrile rubber. Wear eye or face protection: Recommended:
splash goggles. Wear protective clothing.
P273 - Avoid release to the environment.
P260 - Do not breathe vapour.
Response : P304 + P340 - IF INHALED: Remove person to fresh air and keep comfortable for
breathing.
P301 + P310 + P331 - IF SWALLOWED: Immediately call a POISON CENTER or
physician. Do NOT induce vomiting.
Storage : P405 - Store locked up.
Disposal : P501 - Dispose of contents and container in accordance with all local, regional,
national and international regulations.
Hazardous ingredients : Hydrocarbons C10, Aromatics, <1% Naphthalene, [Solvent naphtha (petroleum),
heavy arom.]; Camphor; Hydrocarbons, C10, aromatics, >1% naphthalene [Solvent
naphtha (petroleum), heavy arom.]; naphthalene
Special packaging requirements
Containers to be fitted : Not applicable.
with child-resistant
fastenings
Tactile warning of danger : Not applicable.
2.3 Other hazards
Other hazards which do : None known.
not result in classification

SECTION 3: Composition/information on ingredients

Substance/mixture : Mixture
Classification
Product/ingredient name Identifiers % Regulation (EC) No. Type
1272/2008 [CLP]
Hydrocarbons C10, Aromatics, REACH #: 01-2119463583-34 ≥10 - STOT SE 3, H336 [1] [2]
<1% Naphthalene, [Solvent EC: 265-198-5, [918-811-1] ≤25 Asp. Tox. 1, H304
naphtha (petroleum), heavy arom. CAS: 64742-94-5 Aquatic Chronic 2, H411
] Index: 649-424-00-3 EUH066
Camphor REACH #: Compliant ≥10 - Flam. Sol. 2, H228 [1] [2]
EC: 200-945-0 ≤22 Acute Tox. 4, H302
CAS: 76-22-2 Acute Tox. 4, H332
STOT SE 2, H371
Formaldehyde, polymer with CAS: 9040-65-7 ≥10 - Skin Irrit. 2, H315 [1]
nonylphenol ≤25
Polymer. - ≥10 - Eye Irrit. 2, H319 [1]
≤25
Hydrocarbons, C10, aromatics, REACH #: 01-2119463588-24 ≥10 - STOT SE 3, H336 [1] [2]
>1% naphthalene [Solvent EC: 265-198-5, [919-284-0] ≤25 Asp. Tox. 1, H304
naphtha (petroleum), heavy arom. CAS: 64742-94-5 Aquatic Chronic 2, H411
] EUH066
Hydrocarbons, C11-14, n- REACH #: 01-2119456620-43 <10 Asp. Tox. 1, H304 [1] [2]
alkanes, isoalkanes, cyclics, <2% EC: 265-149-8 [926-141-6] EUH066
aromatics [Distillates (petroleum), CAS: 64742-47-8
hydrotreated light] Index: 649-422-00-2
naphthalene REACH #: Compliant ≤2.1 Acute Tox. 4, H302 [1] [2]
EC: 202-049-5 Carc. 2, H351
CAS: 91-20-3 Aquatic Acute 1, H400 (M=1)
Index: 601-052-00-2 Aquatic Chronic 1, H410

Date of issue/Date of revision : 2018-11-23 3/21

Conforms to Regulation (EC) No. 1907/2006 (REACH), Annex II - United Kingdom (UK)
Octamar (TM) BT-25

SECTION 3: Composition/information on ingredients

(M=1)
1,2,4-trimethylbenzene REACH #: Compliant ≤3 Flam. Liq. 3, H226 [1] [2]
EC: 202-436-9 Acute Tox. 4, H332
CAS: 95-63-6 Skin Irrit. 2, H315
Index: 601-043-00-3 Eye Irrit. 2, H319
STOT SE 3, H335
Aquatic Chronic 2, H411
tris(methylphenyl) phosphate REACH #: Compliant ≤0.3 Eye Irrit. 2, H319 [1]
EC: 215-548-8 Skin Sens. 1, H317
CAS: 1330-78-5 Repr. 2, H361f (Fertility)
(oral)
STOT RE 2, H373 (nervous
system) (oral)
Aquatic Acute 1, H400
(M=10)
Aquatic Chronic 1, H410
(M=1)
See Section 16 for the full text of
the H statements declared above.

Additional information

There are no additional ingredients present which, within the current knowledge of the supplier and in the
concentrations applicable, are classified as hazardous to health or the environment, are PBTs or vPvBs or have been
assigned a workplace exposure limit and hence require reporting in this section.
Type
[1] Substance classified with a health or environmental hazard
[2] Substance with a workplace exposure limit
[3] Substance meets the criteria for PBT according to Regulation (EC) No. 1907/2006, Annex XIII
[4] Substance meets the criteria for vPvB according to Regulation (EC) No. 1907/2006, Annex XIII
[5] Substance of equivalent concern
Occupational exposure limits, if available, are listed in Section 8.
Our REACH (pre-) registrations DO NOT cover the following:
1. The manufacture of these products by our company outside the EU unless covered by the Only Representative provisions, and
2. The importation of these products into Europe by other companies. Re-importation by other companies is not covered by our (pre-) registrations
Customers and other third parties importing and/or re-importing our products into Europe will need either:
- Their own (pre-) registration for substances contained in the imported product, or constituent monomers (imported above 1 tonne per year and >2%
by weight) in the case of imported polymers, or
- In the case of importation only, to make use of the "Only Representative" provisions, if available.

SECTION 4: First aid measures

4.1 Description of first aid measures
Eye contact : Immediately flush eyes with plenty of water, occasionally lifting the upper and lower
eyelids. Check for and remove any contact lenses. Continue to rinse for at least 10
minutes. Get medical attention. If necessary, call a poison center or physician.
Inhalation : Remove victim to fresh air and keep at rest in a position comfortable for breathing.
If it is suspected that fumes are still present, the rescuer should wear an appropriate
mask or self-contained breathing apparatus. If not breathing, if breathing is irregular
or if respiratory arrest occurs, provide artificial respiration or oxygen by trained
personnel. It may be dangerous to the person providing aid to give mouth-to-mouth
resuscitation. Get medical attention. If necessary, call a poison center or physician.
If unconscious, place in recovery position and get medical attention immediately.
Maintain an open airway. Loosen tight clothing such as a collar, tie, belt or
waistband. In case of inhalation of decomposition products in a fire, symptoms may
be delayed. The exposed person may need to be kept under medical surveillance
for 48 hours.

Date of issue/Date of revision : 2018-11-23 4/21

Conforms to Regulation (EC) No. 1907/2006 (REACH), Annex II - United Kingdom (UK)
Octamar (TM) BT-25

SECTION 4: First aid measures

Skin contact : Flush contaminated skin with plenty of water. Remove contaminated clothing and
shoes. Continue to rinse for at least 10 minutes. Get medical attention. If
necessary, call a poison center or physician. Wash clothing before reuse. Clean
shoes thoroughly before reuse.
Ingestion : Get medical attention immediately. Call a poison center or physician. Remove
dentures if any. Wash out mouth with water. Stop if the exposed person feels sick
as vomiting may be dangerous. Remove victim to fresh air and keep at rest in a
position comfortable for breathing. Aspiration hazard if swallowed. Can enter lungs
and cause damage. Do not induce vomiting. If vomiting occurs, the head should be
kept low so that vomit does not enter the lungs. Never give anything by mouth to an
unconscious person. If unconscious, place in recovery position and get medical
attention immediately. Maintain an open airway. Loosen tight clothing such as a
collar, tie, belt or waistband.
Protection of first-aiders : No action shall be taken involving any personal risk or without suitable training. If it
is suspected that fumes are still present, the rescuer should wear an appropriate
mask or self-contained breathing apparatus. It may be dangerous to the person
providing aid to give mouth-to-mouth resuscitation.

4.2 Most important symptoms and effects, both acute and delayed
Potential acute health effects
Eye contact : Causes serious eye irritation.
Inhalation : Can cause central nervous system (CNS) depression. May cause drowsiness or
dizziness.
Skin contact : Causes skin irritation.
Ingestion : Can cause central nervous system (CNS) depression. May be fatal if swallowed
and enters airways.
Over-exposure signs/symptoms
Eye contact : Adverse symptoms may include the following:
pain or irritation
watering
redness
Inhalation : Adverse symptoms may include the following:
nausea or vomiting
headache
drowsiness/fatigue
dizziness/vertigo
unconsciousness
Skin contact : Adverse symptoms may include the following:
irritation
redness
Ingestion : Adverse symptoms may include the following:
nausea or vomiting

4.3 Indication of any immediate medical attention and special treatment needed
Notes to physician : In case of inhalation of decomposition products in a fire, symptoms may be delayed.
The exposed person may need to be kept under medical surveillance for 48 hours.
Specific treatments : No specific treatment.

Date of issue/Date of revision : 2018-11-23 5/21

Conforms to Regulation (EC) No. 1907/2006 (REACH), Annex II - United Kingdom (UK)
Octamar (TM) BT-25

SECTION 5: Firefighting measures

5.1 Extinguishing media
Suitable extinguishing : Use an extinguishing agent suitable for the surrounding fire.
media
Unsuitable extinguishing : None known.
media

5.2 Special hazards arising from the substance or mixture

Hazards from the : In a fire or if heated, a pressure increase will occur and the container may burst.
substance or mixture This material is toxic to aquatic life with long lasting effects. Fire water
contaminated with this material must be contained and prevented from being
discharged to any waterway, sewer or drain.
Hazardous thermal : Decomposition products may include the following materials:
decomposition products carbon dioxide
carbon monoxide
nitrogen oxides

5.3 Advice for firefighters

Special protective actions : Promptly isolate the scene by removing all persons from the vicinity of the incident if
for fire-fighters there is a fire. No action shall be taken involving any personal risk or without
suitable training.
Special protective : Fire-fighters should wear appropriate protective equipment and self-contained
equipment for fire-fighters breathing apparatus (SCBA) with a full face-piece operated in positive pressure
mode. Clothing for fire-fighters (including helmets, protective boots and gloves)
conforming to European standard EN 469 will provide a basic level of protection for
chemical incidents.

SECTION 6: Accidental release measures

6.1 Personal precautions, protective equipment and emergency procedures
For non-emergency : No action shall be taken involving any personal risk or without suitable training.
personnel Evacuate surrounding areas. Keep unnecessary and unprotected personnel from
entering. Do not touch or walk through spilt material. Avoid breathing vapour or
mist. Provide adequate ventilation. Wear appropriate respirator when ventilation is
inadequate. Put on appropriate personal protective equipment.
For emergency responders : If specialised clothing is required to deal with the spillage, take note of any
information in Section 8 on suitable and unsuitable materials. See also the
information in "For non-emergency personnel".

6.2 Environmental : Avoid dispersal of spilt material and runoff and contact with soil, waterways, drains
precautions and sewers. Inform the relevant authorities if the product has caused environmental
pollution (sewers, waterways, soil or air). Water polluting material. May be harmful
to the environment if released in large quantities. Collect spillage.

6.3 Methods and material for containment and cleaning up

Small spill : Stop leak if without risk. Move containers from spill area. Dilute with water and mop
up if water-soluble. Alternatively, or if water-insoluble, absorb with an inert dry
material and place in an appropriate waste disposal container. Dispose of via a
licensed waste disposal contractor.

Date of issue/Date of revision : 2018-11-23 6/21

Conforms to Regulation (EC) No. 1907/2006 (REACH), Annex II - United Kingdom (UK)
Octamar (TM) BT-25

SECTION 6: Accidental release measures

Large spill : Stop leak if without risk. Move containers from spill area. Approach the release
from upwind. Prevent entry into sewers, water courses, basements or confined
areas. Wash spillages into an effluent treatment plant or proceed as follows.
Contain and collect spillage with non-combustible, absorbent material e.g. sand,
earth, vermiculite or diatomaceous earth and place in container for disposal
according to local regulations. Dispose of via a licensed waste disposal contractor.
Contaminated absorbent material may pose the same hazard as the spilt product.

6.4 Reference to other : See Section 1 for emergency contact information.

sections See Section 8 for information on appropriate personal protective equipment.
See Section 13 for additional waste treatment information.

SECTION 7: Handling and storage

The information in this section contains generic advice and guidance. The list of Identified Uses in Section 1 should be
consulted for any available use-specific information provided in the Exposure Scenario(s).
7.1 Precautions for safe handling
Protective measures : Put on appropriate personal protective equipment (see Section 8). Avoid exposure -
obtain special instructions before use. Do not handle until all safety precautions
have been read and understood. Do not get in eyes or on skin or clothing. Do not
breathe vapour or mist. Do not swallow. Avoid release to the environment. Use
only with adequate ventilation. Wear appropriate respirator when ventilation is
inadequate. Keep in the original container or an approved alternative made from a
compatible material, kept tightly closed when not in use. Empty containers retain
product residue and can be hazardous. Do not reuse container.
Advice on general : Eating, drinking and smoking should be prohibited in areas where this material is
occupational hygiene handled, stored and processed. Workers should wash hands and face before
eating, drinking and smoking. Remove contaminated clothing and protective
equipment before entering eating areas. See also Section 8 for additional
information on hygiene measures.

7.2 Conditions for safe storage, including any incompatibilities

Storage : Store in accordance with local regulations. Store in a dry, cool and well-ventilated
area, away from incompatible materials (see Section 10). Store locked up. Keep
container tightly closed and sealed until ready for use. Containers that have been
opened must be carefully resealed and kept upright to prevent leakage. Do not
store in unlabelled containers. Use appropriate containment to avoid environmental
contamination.

7.3 Specific end use(s)

Recommendations : Not available.
Industrial sector specific : Not available.
solutions

SECTION 8: Exposure controls/personal protection

The information in this section contains generic advice and guidance. The list of Identified Uses in Section 1 should be
consulted for any available use-specific information provided in the Exposure Scenario(s).
8.1 Control parameters
Occupational exposure limits

Date of issue/Date of revision : 2018-11-23 7/21

Conforms to Regulation (EC) No. 1907/2006 (REACH), Annex II - United Kingdom (UK)
Octamar (TM) BT-25

SECTION 8: Exposure controls/personal protection

Product/ingredient name Exposure limit values
Hydrocarbons C10, Aromatics, <1% Supplier/Manufacturer (Europe, 2015).
Naphthalene, [Solvent naphtha (petroleum), EU HSPA (RCP Aromatic solvents 180 - 215): 151 mg/m³ 8 hours.
heavy arom.]
Camphor EH40/2005 WELs (United Kingdom (UK), 12/2011).
STEL: 19 mg/m³ 15 minutes.
STEL: 3 ppm 15 minutes.
TWA: 2 ppm 8 hours.
TWA: 13 mg/m³ 8 hours.
Hydrocarbons, C10, aromatics, >1% Supplier/Manufacturer (Europe, 2015).
naphthalene [Solvent naphtha (petroleum), EU HSPA (RCP Aromatic solvents 180 - 215): 151 mg/m³ 8 hours.
heavy arom.]
Hydrocarbons, C11-14, n-alkanes, isoalkanes, EU OEL (Europe, 2009).
cyclics, <2% aromatics [Distillates (petroleum), Supplier's information Reciprocal Calculation Procedure (RCP) :
hydrotreated light] 1200 mg/m³ 8 hours.
naphthalene EU OEL (Europe, 12/2017). Notes: list of indicative
occupational exposure limit values
TWA: 10 ppm 8 hours.
TWA: 50 mg/m³, 0 times per shift, 8 hours.
1,2,4-trimethylbenzene EH40/2005 WELs (United Kingdom (UK), 12/2011).
TWA: 25 ppm, 0 times per shift, 8 hours.
TWA: 125 mg/m³, 0 times per shift, 8 hours.
Recommended monitoring : If this product contains ingredients with exposure limits, personal, workplace
procedures atmosphere or biological monitoring may be required to determine the effectiveness
of the ventilation or other control measures and/or the necessity to use respiratory
protective equipment. Reference should be made to monitoring standards, such as
the following: European Standard EN 689 (Workplace atmospheres - Guidance for
the assessment of exposure by inhalation to chemical agents for comparison with
limit values and measurement strategy) European Standard EN 14042 (Workplace
atmospheres - Guide for the application and use of procedures for the assessment
of exposure to chemical and biological agents) European Standard EN 482
(Workplace atmospheres - General requirements for the performance of procedures
for the measurement of chemical agents) Reference to national guidance
documents for methods for the determination of hazardous substances will also be
required.
DNELs/DMELs
Product/ingredient name Type Exposure Value Population Effects
Hydrocarbons C10, Aromatics, <1% DNEL Long term Dermal 12.5 mg/ Workers Systemic
Naphthalene, [Solvent naphtha kg bw/day
(petroleum), heavy arom.]
DNEL Long term 151 mg/m³ Workers Systemic
Inhalation
DNEL Long term Dermal 7.5 mg/kg Consumers Systemic
bw/day
DNEL Long term 32 mg/m³ Consumers Systemic
Inhalation
DNEL Long term Oral 7.5 mg/kg Consumers Systemic
bw/day
Hydrocarbons, C10, aromatics, >1% DNEL Long term Dermal 12.5 mg/ Workers Systemic
naphthalene [Solvent naphtha kg bw/day
(petroleum), heavy arom.]
DNEL Long term 151 mg/m³ Workers Systemic
Inhalation
DNEL Long term Dermal 7.5 mg/kg Consumers Systemic
bw/day
DNEL Long term 32 mg/m³ Consumers Systemic

Date of issue/Date of revision : 2018-11-23 8/21

Conforms to Regulation (EC) No. 1907/2006 (REACH), Annex II - United Kingdom (UK)
Octamar (TM) BT-25

SECTION 8: Exposure controls/personal protection

Inhalation
DNEL Long term Oral 7.5 mg/kg Consumers Systemic
bw/day
naphthalene DNEL Long term Dermal 3.57 mg/ Workers Systemic
kg bw/day
DNEL Long term 25 mg/m³ Workers Systemic
Inhalation
DNEL Long term 25 mg/m³ Workers Local
Inhalation
1,2,4-trimethylbenzene DNEL Short term 100 mg/m³ Workers Systemic
Inhalation
DNEL Short term 100 mg/m³ Workers Local
Inhalation
DNEL Long term Dermal 16171 mg/ Workers Systemic
kg bw/day
DNEL Long term 100 mg/m³ Workers Systemic
Inhalation
DNEL Long term 100 mg/m³ Workers Local
Inhalation
DNEL Short term 29.4 mg/m³ Consumers Systemic
Inhalation
DNEL Short term 29.4 mg/m³ Consumers Local
Inhalation
DNEL Long term Dermal 9512 mg/ Consumers Systemic
kg bw/day
DNEL Long term 29.4 mg/m³ Consumers Systemic
Inhalation
DNEL Long term Oral 15 mg/kg Consumers Systemic
bw/day
DNEL Long term 29.4 mg/m³ Consumers Local
Inhalation
PNECs
Product/ingredient name Type Compartment Detail Value Method Detail
naphthalene PNEC Fresh water 2.4 μg/l -
PNEC Marine 0.24 μg/l -
PNEC Sewage Treatment 2.9 mg/l -
Plant
PNEC Fresh water sediment 67.2 μg/kg dwt -
PNEC Marine water sediment 67.2 μg/kg dwt -
PNEC Soil 53.3 μg/kg dwt -
1,2,4-trimethylbenzene PNEC Fresh water 0.12 mg/l -
PNEC Marine 0.12 mg/l -
PNEC Sewage Treatment 2.41 mg/l -
Plant
PNEC Fresh water sediment 13.56 mg/kg dwt -
PNEC Marine water sediment 13.56 mg/kg dwt -
PNEC Soil 2.34 mg/kg dwt -

8.2 Exposure controls

Appropriate engineering : Use only with adequate ventilation. Use process enclosures, local exhaust
controls ventilation or other engineering controls to keep worker exposure to airborne
contaminants below any recommended or statutory limits.
Individual protection measures

Date of issue/Date of revision : 2018-11-23 9/21

Conforms to Regulation (EC) No. 1907/2006 (REACH), Annex II - United Kingdom (UK)
Octamar (TM) BT-25

SECTION 8: Exposure controls/personal protection

Hygiene measures : Wash hands, forearms and face thoroughly after handling chemical products, before
eating, smoking and using the lavatory and at the end of the working period.
Appropriate techniques should be used to remove potentially contaminated clothing.
Wash contaminated clothing before reusing. Ensure that eyewash stations and
safety showers are close to the workstation location.
Eye/face protection : Safety eyewear complying with an approved standard should be used when a risk
assessment indicates this is necessary to avoid exposure to liquid splashes, mists,
gases or dusts. If contact is possible, the following protection should be worn,
unless the assessment indicates a higher degree of protection: chemical splash
goggles. Recommended: splash goggles
Skin protection
Hand protection : Chemical-resistant, impervious gloves complying with an approved standard should
be worn at all times when handling chemical products if a risk assessment indicates
this is necessary. Considering the parameters specified by the glove manufacturer,
check during use that the gloves are still retaining their protective properties. It
should be noted that the time to breakthrough for any glove material may be
different for different glove manufacturers. In the case of mixtures, consisting of
several substances, the protection time of the gloves cannot be accurately
estimated. > 8 hours (breakthrough time): Viton®
1 - 4 hours (breakthrough time): nitrile rubber
Body protection : Personal protective equipment for the body should be selected based on the task
being performed and the risks involved and should be approved by a specialist
before handling this product.
Other skin protection : Appropriate footwear and any additional skin protection measures should be
selected based on the task being performed and the risks involved and should be
approved by a specialist before handling this product.
Respiratory protection : Based on the hazard and potential for exposure, select a respirator that meets the
appropriate standard or certification. Respirators must be used according to a
respiratory protection program to ensure proper fitting, training, and other important
aspects of use. Recommended: organic vapour filter (Type A)
Environmental exposure : Emissions from ventilation or work process equipment should be checked to ensure
controls they comply with the requirements of environmental protection legislation. In some
cases, fume scrubbers, filters or engineering modifications to the process
equipment will be necessary to reduce emissions to acceptable levels.

SECTION 9: Physical and chemical properties

9.1 Information on basic physical and chemical properties
Appearance
Physical state : Liquid.
Colour : Brownish [Dark]
Odour : Characteristic.
Odour threshold : Not available.
pH : Not available.
Melting point/freezing point : Not available.
Initial boiling point and : Lowest known value: 168.01°C (334.4°F) (1,2,4-trimethylbenzene). Weighted
boiling range average: 256.25°C (493.3°F)
Flash point : Closed cup: 66°C (150.8°F) [DIN EN ISO 2719]
Evaporation rate : 600 (Distillates (petroleum), hydrotreated light) compared with ether (anhydrous)
Flammability (solid, gas) : Not available.
Burning time : Not applicable.
Burning rate : Not applicable.

Date of issue/Date of revision : 2018-11-23 10/21

Conforms to Regulation (EC) No. 1907/2006 (REACH), Annex II - United Kingdom (UK)
Octamar (TM) BT-25

SECTION 9: Physical and chemical properties

Upper/lower flammability or : Greatest known range: Lower: 0.5% Upper: 8% (Distillates (petroleum),
explosive limits hydrotreated light)
Vapour pressure : Highest known value: 0.1 kPa (0.8 mm Hg) (at 20°C) (Solvent naphtha
(petroleum), heavy arom.). Weighted average: 0.06 kPa (0.45 mm Hg) (at 20°C)
Vapour density : Highest known value: 4.6 to 5.5 (Air = 1) (Solvent naphtha (petroleum), heavy
arom.). Weighted average: 4.33 (Air = 1)
Relative density : Not available.
Density : 0.9444 g/cm³ [15°C (59°F)]
Solubility(ies) : Very slightly soluble in the following materials: cold water, hot water.
Insoluble in the following materials: methanol, diethyl ether.
Partition coefficient: n-octanol/ : Not applicable.
water
Auto-ignition temperature : >400°C (>752°F)
Decomposition temperature : Not available.
Viscosity : Kinematic (40°C (104°F)): 0.17 cm2/s (17 cSt) [ISO 3104 / DIN 51562]
Explosive properties : Not available.
Oxidising properties : Not applicable.

9.2 Other information

SECTION 10: Stability and reactivity

10.1 Reactivity : No specific test data related to reactivity available for this product or its ingredients.

10.2 Chemical stability : The product is stable.

10.3 Possibility of : Under normal conditions of storage and use, hazardous reactions will not occur.
hazardous reactions

10.4 Conditions to avoid : No specific data.

10.5 Incompatible materials : No specific data.

10.6 Hazardous : Under normal conditions of storage and use, hazardous decomposition products
decomposition products should not be produced.

SECTION 11: Toxicological information

11.1 Information on toxicological effects
Acute toxicity
Product/ingredient name Test Species Result type Dose
Hydrocarbons C10, - Rat LC50 >590 mg/m³ 4 hours
Aromatics, <1% Inhalation
Naphthalene, [Solvent Vapour
naphtha (petroleum), heavy
arom.]
- Rabbit LD50 Dermal >2 mL/kg -
- Rabbit LD50 Dermal 2000 mg/kg -
- Rat LDLo Oral 5 mL/kg -
Camphor OECD 402 Acute Dermal Rat LD50 Dermal >2000 mg/kg -
Toxicity

Date of issue/Date of revision : 2018-11-23 11/21

Conforms to Regulation (EC) No. 1907/2006 (REACH), Annex II - United Kingdom (UK)
Octamar (TM) BT-25

SECTION 11: Toxicological information

- Mouse LD50 Oral 1310 mg/kg -
Polymer. - Rat LD50 Oral >5000 mg/kg -
Hydrocarbons, C10, - Rat LC50 >590 mg/m³ 4 hours
aromatics, >1% Inhalation
naphthalene [Solvent Vapour
naphtha (petroleum), heavy
arom.]
- Rabbit LD50 Dermal >2 mL/kg -
- Rabbit LD50 Dermal 2000 mg/kg -
- Rat LDLo Oral 5 mL/kg -
Hydrocarbons, C11-14, n- OECD 403 Acute Inhalation Rat LC50 >5000 mg/m³ 8 hours
alkanes, isoalkanes, cyclics, Toxicity Inhalation
<2% aromatics [Distillates Vapour
(petroleum), hydrotreated
light]
OECD 402 Acute Dermal Rabbit LD50 Dermal >5000 mg/kg -
Toxicity
OECD 401 Acute Oral Toxicity Rat LD50 Oral >5000 mg/kg -
naphthalene - Rat LC50 >340 mg/m³ 1 hours
Inhalation
Vapour
- Rabbit LD50 Dermal >2000 mg/kg -
- Rat LD50 Oral 490 mg/kg -
tris(methylphenyl) - Rabbit LD50 Dermal >10000 mg/kg -
phosphate
- Rat LD50 Oral 3 g/kg -
Acute toxicity estimates (ATE)
Route ATE value
Oral 2359.3 mg/kg
Inhalation (vapours) 52.71 mg/l
Irritation/Corrosion
Product/ingredient name Test Species Result
Hydrocarbons C10, - Rabbit Skin - Mild irritant -
Aromatics, <1%
Naphthalene, [Solvent
naphtha (petroleum), heavy
arom.]
- Mammal - Eyes - Mild irritant -
species
unspecified
Hydrocarbons, C10, - Rabbit Skin - Mild irritant -
aromatics, >1%
naphthalene [Solvent
naphtha (petroleum), heavy
arom.]
- Mammal - Eyes - Mild irritant -
species
unspecified
tris(methylphenyl) - Rabbit Eyes - Mild irritant -
phosphate
- Rabbit Skin - Mild irritant -
Sensitisation

Date of issue/Date of revision : 2018-11-23 12/21

Conforms to Regulation (EC) No. 1907/2006 (REACH), Annex II - United Kingdom (UK)
Octamar (TM) BT-25

SECTION 11: Toxicological information

Product/ingredient name Test Species Result
Hydrocarbons, C11-14, n- - Rat Not sensitizing -
alkanes, isoalkanes, cyclics,
<2% aromatics [Distillates
(petroleum), hydrotreated
light]
Mutagenicity
Product/ingredient name Test Experiment Result
Hydrocarbons, C11-14, n- - Experiment: In vivo Negative
alkanes, isoalkanes, cyclics, Subject: Bacteria
<2% aromatics [Distillates
(petroleum), hydrotreated
light]

Information on likely routes : Routes of entry anticipated: Oral, Dermal, Inhalation.

of exposure
Potential acute health effects
Eye contact : Causes serious eye irritation.
Inhalation : Can cause central nervous system (CNS) depression. May cause drowsiness or
dizziness.
Skin contact : Causes skin irritation.
Ingestion : Can cause central nervous system (CNS) depression. May be fatal if swallowed
and enters airways.

Symptoms related to the physical, chemical and toxicological characteristics

Eye contact : Adverse symptoms may include the following:
pain or irritation
watering
redness
Inhalation : Adverse symptoms may include the following:
nausea or vomiting
headache
drowsiness/fatigue
dizziness/vertigo
unconsciousness
Skin contact : Adverse symptoms may include the following:
irritation
redness
Ingestion : Adverse symptoms may include the following:
nausea or vomiting

Delayed and immediate effects as well as chronic effects from short and long-term exposure
Short term exposure
Potential immediate : Not available.
effects
Potential delayed effects : Not available.
Long term exposure
Potential immediate : Not available.
effects
Potential delayed effects : Not available.

Date of issue/Date of revision : 2018-11-23 13/21

Conforms to Regulation (EC) No. 1907/2006 (REACH), Annex II - United Kingdom (UK)
Octamar (TM) BT-25

SECTION 11: Toxicological information

General : No known significant effects or critical hazards.
Carcinogenicity : Suspected of causing cancer. Risk of cancer depends on duration and level of
exposure.
Mutagenicity : No known significant effects or critical hazards.
Teratogenicity : No known significant effects or critical hazards.
Developmental effects : No known significant effects or critical hazards.
Fertility effects : No known significant effects or critical hazards.

SECTION 12: Ecological information

12.1 Toxicity
Product/ingredient name Test Species Exposure Result
Hydrocarbons C10, - Algae 72 Acute EC50 1 to 3 mg/l
Aromatics, <1% hours
Naphthalene, [Solvent
naphtha (petroleum), heavy
arom.]
- Daphnia 48 Acute EC50 3 to 10 mg/l
hours
- Fish 96 Acute LC50 2 to 5 mg/l
hours
Hydrocarbons, C10, - Algae 72 Acute EC50 1 to 3 mg/l
aromatics, >1% hours
naphthalene [Solvent
naphtha (petroleum), heavy
arom.]
- Daphnia 48 Acute EC50 3 to 10 mg/l
hours
- Fish 96 Acute LC50 2 to 5 mg/l
hours
naphthalene - Daphnia - Water flea - 48 Acute EC50 1.96 mg/l Fresh
Daphnia magna hours water
- Crustaceans - 48 Acute LC50 2350 μg/l Marine
Daggerblade grass hours water
shrimp -
Palaemonetes pugio
- Fish - Oncorhynchus 96 Acute LC50 1.6 mg/l
mykiss hours
- Crustaceans - Fiddler 3 Chronic NOEC 0.5 mg/l
crab - Uca pugnax - weeks Marine water
Adult
- Fish - Mozambique 60 days Chronic NOEC 1.5 mg/l
tilapia - Oreochromis Fresh water
mossambicus
1,2,4-trimethylbenzene - Fish - Pimephales 96 Acute LC50 7.72 mg/l
promelas hours
tris(methylphenyl) phosphate - Algae - Green algae - 96 Acute EC50 1300 μg/l Fresh
Scenedesmus hours water
pannonicus -
Exponential growth
phase
- Daphnia - Daphnia 48 Acute EC50 3.2 mg/l
magna hours
- Fish - Oncorhynchus 96 Acute LC50 0.26 mg/l
mykiss hours

Date of issue/Date of revision : 2018-11-23 14/21

Conforms to Regulation (EC) No. 1907/2006 (REACH), Annex II - United Kingdom (UK)
Octamar (TM) BT-25

SECTION 12: Ecological information

- Fish - Threespine 96 Chronic NOEC 160 μg/l Fresh
stickleback - hours water
Gasterosteus
aculeatus - Egg

12.2 Persistence and degradability

Product/ingredient name Test Result
Polymer. OECD 310 Ready Biodegradability - CO2 in 12 % - Inherent - 28 days
Sealed Vessels (Headspace Test)
Hydrocarbons, C11-14, n- OECD 301F Ready Biodegradability - 69 % - Readily - 28 days
alkanes, isoalkanes, cyclics, Manometric Respirometry Test
<2% aromatics [Distillates
(petroleum), hydrotreated
light]
tris(methylphenyl) OECD 301B Ready Biodegradability - CO2 82 % - 28 days
phosphate Evolution Test
OECD 301C Ready Biodegradability - Modified 80 % - 28 days
MITI Test (I)

Product/ingredient name Aquatic half-life Photolysis Biodegradability

Hydrocarbons C10, - - Inherent
Aromatics, <1%
Naphthalene, [Solvent
naphtha (petroleum), heavy
arom.]
Polymer. - - Inherent
Hydrocarbons, C10, - - Inherent
aromatics, >1%
naphthalene [Solvent
naphtha (petroleum), heavy
arom.]
Hydrocarbons, C11-14, n- - - Readily
alkanes, isoalkanes, cyclics,
<2% aromatics [Distillates
(petroleum), hydrotreated
light]
tris(methylphenyl) phosphate - 50%; < 28 day(s) Readily

12.3 Bioaccumulative potential

Product/ingredient name LogPow BCF Potential
Hydrocarbons C10, 2.8 to 6.5 <100 low
Aromatics, <1%
Naphthalene, [Solvent
naphtha (petroleum), heavy
arom.]
Polymer. <-1 - low
Hydrocarbons, C10, - <100 low
aromatics, >1%
naphthalene [Solvent
naphtha (petroleum), heavy
arom.]
Hydrocarbons, C11-14, n- 6 to 8 - high
alkanes, isoalkanes, cyclics,
<2% aromatics [Distillates
(petroleum), hydrotreated
light]

Date of issue/Date of revision : 2018-11-23 15/21

Conforms to Regulation (EC) No. 1907/2006 (REACH), Annex II - United Kingdom (UK)
Octamar (TM) BT-25

SECTION 12: Ecological information

naphthalene 3.3 >100 low
1,2,4-trimethylbenzene 4.09 275 low

12.4 Mobility in soil

Soil/water partition : Not available.
coefficient (KOC)
Mobility : Not available.

12.5 Results of PBT and vPvB assessment

PBT : Not applicable.
vPvB : Not applicable.

12.6 Other adverse effects : No known significant effects or critical hazards.

SECTION 13: Disposal considerations

The information in this section contains generic advice and guidance. The list of Identified Uses in Section 1 should be
consulted for any available use-specific information provided in the Exposure Scenario(s).
13.1 Waste treatment methods
Product
Methods of disposal : The generation of waste should be avoided or minimised wherever possible.
Disposal of this product, solutions and any by-products should at all times comply
with the requirements of environmental protection and waste disposal legislation
and any regional local authority requirements. Dispose of surplus and non-
recyclable products via a licensed waste disposal contractor. Waste should not be
disposed of untreated to the sewer unless fully compliant with the requirements of
all authorities with jurisdiction.
Hazardous waste : The classification of the product may meet the criteria for a hazardous waste.
Packaging
Methods of disposal : The generation of waste should be avoided or minimised wherever possible. Waste
packaging should be recycled. Incineration or landfill should only be considered
when recycling is not feasible.
Special precautions : This material and its container must be disposed of in a safe way. Care should be
taken when handling emptied containers that have not been cleaned or rinsed out.
Empty containers or liners may retain some product residues. Avoid dispersal of
spilt material and runoff and contact with soil, waterways, drains and sewers.

SECTION 14: Transport information

ADR/RID ADN IMDG IATA
14.1 UN number UN3082 UN3082 UN3082 UN3082

14.2 UN proper ENVIRONMENTALLY ENVIRONMENTALLY ENVIRONMENTALLY Environmentally

shipping name HAZARDOUS HAZARDOUS HAZARDOUS hazardous substance,
SUBSTANCE, SUBSTANCE, SUBSTANCE, liquid, n.o.s. (Solvent
LIQUID, N.O.S. LIQUID, N.O.S. LIQUID, N.O.S. naphtha (petroleum),
(Solvent naphtha (Solvent naphtha (Solvent naphtha heavy arom.)
(petroleum), heavy (petroleum), heavy (petroleum), heavy
arom.) arom.) arom.). Marine
pollutant (Solvent
naphtha (petroleum),

Date of issue/Date of revision : 2018-11-23 16/21

Conforms to Regulation (EC) No. 1907/2006 (REACH), Annex II - United Kingdom (UK)
Octamar (TM) BT-25

SECTION 14: Transport information

heavy arom.)
14.3 Transport hazard 9 9 9 9
class(es)

14.4 Packing group III III III III

14.5 Environmental Yes. Yes. Yes. Yes.
hazards

Additional information This product is not This product is not This product is not
regulated as a regulated as a regulated as a
dangerous good when dangerous good when dangerous good when
transported in sizes of transported in sizes of transported in sizes of
≤5 L or ≤5 kg, ≤5 L or ≤5 kg, ≤5 L or ≤5 kg,
provided the provided the provided the
packagings meet the packagings meet the packagings meet the
general provisions of general provisions of general provisions of
4.1.1.1, 4.1.1.2 and 4. 4.1.1.1, 4.1.1.2 and 4. 4.1.1.1, 4.1.1.2 and 4.
1.1.4 to 4.1.1.8. 1.1.4 to 4.1.1.8. 1.1.4 to 4.1.1.8.

Hazard identification Special provisions Emergency

number 274, 335, 375, 601 schedules (EmS)
90 F-A, S-F

Limited quantity Special provisions

5L 274, 335, 969

Special provisions
274, 335, 601, 375

14.6 Special
precautions for user

14.7 Transport in bulk

according to Annex II
of Marpol and the IBC
Code

Date of issue/Date of revision : 2018-11-23 17/21

Conforms to Regulation (EC) No. 1907/2006 (REACH), Annex II - United Kingdom (UK)
Octamar (TM) BT-25

SECTION 15: Regulatory information

15.1 Safety, health and environmental regulations/legislation specific for the substance or mixture
EU Regulation (EC) No. 1907/2006 (REACH)
Annex XIV - List of substances subject to authorisation
Substances of very high concern
None of the components are listed.
Annex XVII - Restrictions : Not applicable.
on the manufacture,
placing on the market
and use of certain
dangerous substances,
mixtures and articles
Other EU regulations
Seveso Directive - Reporting thresholds (in tonnes)
Danger criteria
Category Notification and MAPP Safety report threshold
threshold
E2: Hazardous to the aquatic environment - Chronic 2 200 500
9ii: Toxic for the environment 200 500

Black List Chemicals : Not listed

Priority List Chemicals : Not determined
Industrial emissions : Not listed
(integrated pollution
prevention and control) -
Air
Industrial emissions : Not listed
(integrated pollution
prevention and control) -
Water
Product/ingredient name Carcinogenic Mutagenic effects Developmental Fertility effects
effects effects
naphthalene Carc. 2, H351 - - -
tris(methylphenyl) - - - Repr. 2, H361f
phosphate (Fertility) (oral)

Chemical Weapons : Not listed

Convention List Schedule I
Chemicals
Chemical Weapons : Not listed
Convention List Schedule II
Chemicals
Chemical Weapons : Not listed
Convention List Schedule III
Chemicals

International lists
Australia inventory (AICS) : All components are listed or exempted.

Date of issue/Date of revision : 2018-11-23 18/21

Conforms to Regulation (EC) No. 1907/2006 (REACH), Annex II - United Kingdom (UK)
Octamar (TM) BT-25

SECTION 15: Regulatory information

Canada inventory : All components are listed or exempted.
China inventory (IECSC) : All components are listed or exempted.
EU Inventory (EINECS/ : All components are listed or exempted.
ELINCS/NLP)
Japan inventory (ENCS) : Japan inventory (ENCS): All components are listed or exempted.
Japan inventory (ISHL): Not determined.
Korea inventory (KECI) : All components are listed or exempted.
New Zealand Inventory of : All components are listed or exempted.
Chemicals (NZIoC)
Philippines inventory : All components are listed or exempted.
(PICCS)
Taiwan inventory (TCSI) : All components are listed or exempted.
United States inventory : All components are listed or exempted.
(TSCA 8b)

15.2 Chemical safety : This product contains substances for which Chemical Safety Assessments are still
assessment required.

SECTION 16: Other information

Abbreviations and : ATE = Acute Toxicity Estimate
acronyms CLP = Classification, Labelling and Packaging Regulation [Regulation (EC) No.
1272/2008]
DNEL = Derived No Effect Level
EUH statement = CLP-specific Hazard statement
PNEC = Predicted No Effect Concentration
RRN = REACH Registration Number
Procedure used to derive the classification according to Regulation (EC) No. 1272/2008 [CLP/GHS]
Classification Justification
Skin Irrit. 2, H315 Calculation method
Eye Irrit. 2, H319 Calculation method
Carc. 2, H351 Calculation method
STOT SE 2, H371 Calculation method
STOT SE 3, H336 Calculation method
Asp. Tox. 1, H304 Calculation method
Aquatic Chronic 2, H411 Calculation method
Full text of abbreviated H : H226 Flammable liquid and vapour.
statements H228 Flammable solid.
H302 Harmful if swallowed.
H304 May be fatal if swallowed and enters airways.
H315 Causes skin irritation.
H317 May cause an allergic skin reaction.
H319 Causes serious eye irritation.
H332 Harmful if inhaled.
H335 May cause respiratory irritation.
H336 May cause drowsiness or dizziness.
H351 Suspected of causing cancer.
H361f Suspected of damaging fertility if swallowed.
(oral)

Date of issue/Date of revision : 2018-11-23 19/21

Conforms to Regulation (EC) No. 1907/2006 (REACH), Annex II - United Kingdom (UK)
Octamar (TM) BT-25

SECTION 16: Other information

H371 May cause damage to organs.
H373 May cause damage to organs through prolonged or repeated exposure if
(oral) swallowed.
H400 Very toxic to aquatic life.
H410 Very toxic to aquatic life with long lasting effects.
H411 Toxic to aquatic life with long lasting effects.
Full text of classifications : Acute Tox. 4, H302 ACUTE TOXICITY (oral) - Category 4
[CLP/GHS] Acute Tox. 4, H332 ACUTE TOXICITY (inhalation) - Category 4
Aquatic Acute 1, H400 ACUTE AQUATIC HAZARD - Category 1
Aquatic Chronic 1, H410 LONG-TERM AQUATIC HAZARD - Category 1
Aquatic Chronic 2, H411 LONG-TERM AQUATIC HAZARD - Category 2
Asp. Tox. 1, H304 ASPIRATION HAZARD - Category 1
Carc. 2, H351 CARCINOGENICITY - Category 2
EUH066 Repeated exposure may cause skin dryness or cracking.
Eye Irrit. 2, H319 SERIOUS EYE DAMAGE/EYE IRRITATION - Category 2
Flam. Liq. 3, H226 FLAMMABLE LIQUIDS - Category 3
Flam. Sol. 2, H228 FLAMMABLE SOLIDS - Category 2
Repr. 2, H361f (oral) REPRODUCTIVE TOXICITY (Fertility) (oral) - Category 2
Skin Irrit. 2, H315 SKIN CORROSION/IRRITATION - Category 2
Skin Sens. 1, H317 SKIN SENSITISATION - Category 1
STOT RE 2, H373 (oral) SPECIFIC TARGET ORGAN TOXICITY - REPEATED
EXPOSURE (oral) - Category 2
STOT SE 2, H371 SPECIFIC TARGET ORGAN TOXICITY - SINGLE
EXPOSURE - Category 2
STOT SE 3, H335 SPECIFIC TARGET ORGAN TOXICITY - SINGLE
EXPOSURE (Respiratory tract irritation) - Category 3
STOT SE 3, H336 SPECIFIC TARGET ORGAN TOXICITY - SINGLE
EXPOSURE (Narcotic effects) - Category 3
Date of printing : 2018-11-23
Date of issue/ Date of : 2018-11-23
revision
Date of previous issue : 2018-01-23
Version : 9
Emergency contact numbers for local language support in Asia Pacific region
Country information Languages supported Telephone no.: Location
Australia English +61 2 8014 4558 Australia
Bangladesh Bengali, English +65 3158 1200 Singapore
China Mandarin, English +86 10 5100 3039 Beijing China
India Hindi, English +65 3158 1198 Singapore
India ( local toll free number ) Hindi, English 000800 100 7479 India
Indonesia (local toll free Bahasa Indonesian, English 00780 3011 0293 Indonesia
number)
Japan Japanese, English +81 3 4578 9341 Japan
Korea Korean, English +65 3158 1285 Singapore
Malaysia Bahasa Malaysian, English +60 3 6207 4347 Malaysia
New Zealand English +64 9929 1483 New Zealand
Pakistan Urdu, English +65 3158 1329 Singapore
Philippines Tagalog, English +65 3158 1203 Singapore
Sri Lanka Sinhalese, English +65 3158 1195 Singapore

Date of issue/Date of revision : 2018-11-23 20/21

Conforms to Regulation (EC) No. 1907/2006 (REACH), Annex II - United Kingdom (UK)
Octamar (TM) BT-25

SECTION 16: Other information

Thailand (local toll free Thai, English 001800 1 2066 6751 Thailand
number)
Vietnam Vietnamese, English +65 3158 1255 Singapore
Notice to reader
To the best of our knowledge, the information contained herein is accurate. However, neither the above-
named supplier, nor any of its subsidiaries, assumes any liability whatsoever for the accuracy or
completeness of the information contained herein.
Final determination of suitability of any material is the sole responsibility of the user. All materials may
present unknown hazards and should be used with caution. Although certain hazards are described herein,
we cannot guarantee that these are the only hazards that exist.

Date of issue/Date of revision : 2018-11-23 21/21