Technical Information KORLOY: Endmill

Technical Information KORLOY
Endmill
Drill
Reamer
Chamfer
Thread
CONTENTS
PART 1
Endmill Endmill index 20
Super Endmill [ for difficult-to-cut materials(HRSA/Ti) ] 030

H-Star Endmill [ for high speed and high hardness(HRC50~63) ] 039
U-Star Endmill [ for general cutting(HRC30~50) ] 112
G-Star Endmill [ for general cutting(HRC10~30) ] 196
R+ Endmill [ for roughing ] 221
S-Star Endmill [ for stainless steel ] 228
A-Star Endmill [ for aluminum ] 241
D Endmill [ for graphite ] 253
Composite Router Endmill [ for composite materials ] 262
T Endmill [ for dental prostheses ] 268
PCD Endmill [ for non-ferrous metals ] 271
PART 2
Drill index 272 Drill

MSD Plus 276
MSD Plus-S 282
MLD Plus 287
MSD Plus CFRP 290
MSFD 292
P-Star Drill 297
W-Star Drill 315
SSD-N 324
Burnishing Drill 327
Top Solid Drill 329
PCD Drill 330
Gun Drill 333
PART 3
Reamer / Chamfer / Thread index 336 Reamer

Chucking / Machine Reamer 340 Chamfer
PCD Reamer 342
Cermet Reamer 343 Thread
Broach Reamer 344
Chamfer Tool 345

Counter Sink 348
Thread Mill 352

TAP 374
Recommended cutting conditions 409

Endmills series for difficult-to-cut
materials (HRSA and Ti)
Super
For HRSA
Endmill For Ti
- Machining HRSA and Ti components like
engine, turbine and etc. used in aerospace
and power generation industries
- Optimal for difficult-to-cut materials
machining due to reduced cutting heat and
enhanced chip evacuation
See page 30.
Super Endmill
Optimal endmill for Ni Based super alloy HRSA :
Inconel718, Hastelloy, waspalloy and etc.
4 KORLOY
For High Hardness
H-Star
Endmill - Ultra-fine substrate increases cutting
edge strength of tools.
- The new coating layer applied
provides hardness and a high
temperature oxidation resistance
of cutting edge in high speed
machining
- Optimally designed cutting edge for
high speed machining ensures stable
machinability.
See page 39.
H-Star Endmill
Suitable for high speed machining of hardened

workpieces (HRC50~63).
The line-up of long neck, rib, taper neck, etc. is available for
using in machining with various shapes.
KORLOY
Y 5
U-Star Endmill
U-Star Endmill is suitable for machining medium hardness workpieces

(HRC30~50) made of alloy steel, carbon steel, die steel, etc.
Full line-up available with various shapes like miniature type,

taper neck, ball type, etc.
For mold & die
U-Star
Endmill
- U-Star Endmill is available for a wide cutting range:
roughing, medium cutting and finishing of molds and
dies, and for various cutting methods of curved and
inclined surfaces, special shapes, etc.
- High toughness substrate actualizes chipping resistance
and hardness in machining.
- The new coating technology ensures oxidation resistance
and high cutting edge strength.
See page 112.
6 KORLOY
For low hardness
- E
Excellent Rake angn le and
d Cut
utting
ng edg
dgee co
cons
nsider
e ed
d
the charracte
teristics of wor
orkp
kpie
iece
c .
- Impr
Improv
oved
ed chihippppin
ingg re
resi
sist
stan
ance
ce and enhnhan
ance
cedd
mach
ma chin
inab
abililit
ityy by usi
sing
ng hig
ighh to
toug
ughn
hnes
esss ma
mate
teri
rial
alss.
- TiAl
TiAlNN co
coat
atin
ingg fo
forr en
enha
hanc
nced
ed oxi
xida
dati
tion
n resis
i taanc
n e and
d
chip
ch ippi
ping
ng res
esissta
tancce.
Seee pa
Se page
ge 196
96.
G-Star Endmill
Suitable for low hardness steel (HRC10~30); alloy steel,
carbon steel, Pre-hardened, hardened steel etc.
G ne
Ge neraraal pu
p rp
r osse su
suit
i ab
it able
le for rou
ugh mac achi
hini
ning
ng,,
fini
fi nish
ni s in
sh ing
g an
andd cu
curv
urved
ed andn slolope
ped
pe d su
surf
rfac
facces
Highly Effi
fficient Roughing Endmill Series
- Cost-saving cutting edge design foor highly

efficient roughing applications
- Reduced cutting load due to both differentiall
pitch and unequal helix formation
See page 221.
R+ Endmill
Blade design ideal for roughing
High machining efficiency

due to the special design for
medium to rough cutting
KORLOY
Y 7
For Stainless Steel Machining
S-Star
Endmill
- Highh machining g effi
f ciency throoug
gh unequal ind
dex
cuttting edge in all seriess.
- Exceelleent ch
hipping resisstance and Minimizeed sudden
breakage by using hig gh touughness materialls.
- Multi layer coating for enhanced oxidation resistancce
and high hardness on surrface..
- Superb Groovee design to improve ch
hip emission
according to workpiece’s characteristics.
See page 228.
S-Star Endmill
Suitable for the hard-to-cut and low hardness material

; Stainless, Titanium and Inconel etc.
Gene
Ge nera
rall purp
rpose suitable for roough
h maachi
hini
ning
ng, fi
fini
nish
shing
g an
andd
curv
cu rved and sloped surf rfac
acess.
8 KORLOY
Endmill Series for Aluminum Machining
A-Star
Endmill
- Sharp cutting edgee con
nsid
dered the characteristiccs of
workpiece
- High deposition resisstan
nce and enhanced chip p emissioon
through the surfface of a mirror in the groove.
- Various speccificcattioons in the line such as Ball, sing
glee
flute and roug
ghing etc. for wide range in machining g.
See pa
p ge 241
41..
41
A-Star Endmill
Suitable for Aluminum, aluminum alloy and non-ferrous

materials.
KORLOY
Y 9
Dia
amon
nd-Coated
Endmilll Series
D Endmill
- Extended tool life due to thee diaamond
d
coating of high hardness
- Excellent machhinab
billityy due to the optimizzed
blade desiign
Seee pa
Se p gee 253
53.
D Endmill
One-Pass grinding applied Inhibited unevenness and

excellent finish in machined surfaces
Tangential cutting edge design for

exceptional surface finish
10 KORLOY
Composite Router Endmill
Nano-crystalline diamond coating for excellent tool life
Router Endmill optimized for machining composite materials

(CFRP, GFRP, etc.)
Router Endmill Series for Machining

Composite Materials
Composite
Router Endmill
- Blade design to inhibit delamination and burrs
- Boosted productivity due to highly efficient machining
See page 262.
T Endmill
Customized tools for various machine applications for
dental prostheses
Optimized cutting performance by matching a proper grade

with each type of dental prostheses
Endmill Series for Dental Prostheses

Made of Zirconia, Titanium, Co-Cr,
Wax, PMMA, etc.
T Endmill
- Inhibited unevenness and excellent finish in machined
surfaces due to the optimized cutting edge design
- Specialized tool shape for each machine type
See page 268.
KORLOY 11
Highly Efficient Hole Machining for Various
Workpieces Including Automotive Components
MSD Plus
- Highly efficient hole machining for various
workpiece types such as automotive components
- Wider chip pockets for smooth chip evacuation
See page 276.
MSD Plus
Improved wear resistance by the new grade PC325U
The Hole Machining Tool for

High Precision and High Quality
MLD Plus
- Additional guide margins for stable machinability
See page 287.
MLD Plus
Improved wear resistance by the new grade PC315G
12 KORLOY
For Hole Machining of
Inconel and Titanium
MSD Plus-S
- Stable mach
hinability with th
he optimized blad
de
design and chip pockets
- Exten nded tool liffe du
ue to excelleent high temp
p
resisstance to chiipping
See page 282.
MSD Plus-S
Specialized for heat-resistant alloys used in aerospace,
energy, power generation and automotive industries
Improv
Impr oved
ed produ uctivity and wear resistance
duee to sta
du t bl
blee ma
mach
chin
ch inab
abililit
lityy
KORLOY
Y 13
The Hole Machining Tool
Optimized for CFRP
MSD Plus
CFRP
- Reduced burrs and excellent hole quality in CFRP
machining by the high rake cutting edges
See page 290.
MSD Plus CFRP
Strong wear resistance by the new diamond-coated

grade ND2100
14 KORLOY
The Hole Machining Tool
for Wide Applications
Including Ramped,
Curved and Flat Surfaces
MSFD - High-quality drilling availability in ramped

surfaces by 180° point angle
See page 292.
MSFD
Improved resistance to chipping and welding, and

reduced burrs by edge honing and chamfering
KORLOY 15
Universal drill applied
with DIN standard
P-Star Drill
- High toughness substrate enabling a high speed
and high feed machining.
- The new coating strengthens surface hardness
and thermal stability
- Internal coolant series of P-Star Drill actualizes
high machinability and reduces frictional heat.
See page 297.
P-Star Drill
Drill applied with DIN standard is suitable for

high speed machining (~HRC50).
16 KORLOY
Optimal solid drill for general use of
various workpieces
W-Star Drill
- Enhanced wear resistance, cutting
performance and productivity
- Stable cutting performance in wide cutting
range from low to high speed machining
See page 315.
W-Star Drill
Good wear resistance and welding resistance
KORLOY 17
Carbide Solid
d Drill for Non-ferrous
metalss and Mild steel Machining
SSD-N
- Stable machining for high productivity
S e page 324.
Se
SSD-N
Available for various workpieces such as mild steel

and non-ferrous metals
18 KORLOY
PCD Drill
PCD Drill for highly efficient machining
PCD Drill for High

Precision Machining
PCD Drill
- High functional drill for machining in various
cutting applications
· Cone type drill
· Sandwich type drill
- Realizing excellent precision and surface finish
See page 330.
Various counter sinks for

high efficient machining
Counter Sink
- Unequal division and unequal lead applied for
a high efficiency machining.
- Improved machinability actualizes high
precision and stable machining.
- The new coating layer ensures stable
machinability and extended tool life.
See page 348.
Counter Sink
Carbide/HSS countersink with fast and stable
performance
KORLOY 19
PART 1
Product detaills
2
20 KORL
KORLOY
OY
Super Endmill [for difficult-to-cut materials(HRSA/Ti)] 030
H-Star Endmill [for high speed and high hardness(HRC50~63)] 039
U-Star Endmill [for general cutting(HRC30~55)] 112
G-Star Endmill [for general cutting(HRC10~30)] 196
R+ Endmill [for roughing] 221
S-Star Endmill [for stainless steel] 228
A-Star Endmill [for aluminum] 241
D Endmill [for graphite] 253
Composite Router Endmill [for composite materials] 262
T Endmill [for dental prostheses] 268
PCD Endmill [for non-ferrous metals] 271
Technical information for Endmill
KORLOY 21
Solid tools solution _ part 1
KORLOY Endmill
Application area
Hardness (HRC)
D En
Endmill
nd illl

H-Star Endmill

CComposittte
U St Endmill
U-Star E d ill, Router
o Enddmill
m
T EEndmill
dmill G-Star
G Star Endmill
m
Sup
S per EEndmill
nd ill

S-Star Endmill
d
A-Star
Sta EEndmill
d ill
Workpiece
H S P M K N
Hardened steel Heat resistant alloy, Steel Stainless steel Cast iron Non-ferrous metal
Titanium alloy
Tool selection guideline by functions ●1 st recommended ◑ 2nd recommended ○Not recommended
Type No. of tooth
Precise Trochoidal
Finishing Roughing Slotting Plunging Copying
finishing milling
2
teeth ○ ○ ◑ ● ● ○ ○
3
teeth ○ ◑ ◑ ● ◑ ○ ○
Flat/
Radius
4
teeth ● ● ● ● ○ ○ ●
6
teeth
or over
● ● ○ ○ ○ ○ ●
2
teeth ○ ○ ○ ● ○ ● ○
Ball
4
teeth ○ ○ ○ ◑ ○ ● ○
- It is recommended to choose the shortest length tool in every application as possible.

- Stable machining actualizes long tool life and enhanced surface finish.
22 KORLOY
Solid tools solution _ part 1 Endmill Drill Reamer Chamfer Thread
Line-up and features
Work- Product No. of Diameter Picture

Use Type Features
piece name tooth (tolerance)
No. of standard items
F
•Economical tools for high speed and high
High hardness H-Star hardness machining
H (~HRC63) Endmill
B 2~6 0.1~20
•Available for various shapes of workpiece
R
3,007 Items as long-neck
F •Economical tools for general machining with

hardness U-Star B high performance
2~6 0.1~25
(~HRC50) Endmill R •For various workpiece machining (carbon steel,
R 4,585 Items alloy steel, cast iron, pre-hardened, etc.)
P K
F
•For general machining with high performance
General G-Star and high quality
B 2~4 1.0~20
(~HRC30) Endmill •For various workpiece machining (carbon steel,
R
456 Items alloy steel, cast iron, pre-hardened, etc.)
Stainless S-Star B •Optimal performance in stainless machining

M steel Endmill
2~7 1.0~20
R •Enhanced oxidation resistance
R 187 Items
•Endmill for HRSA machining

Super F
HRSA 4 3.0~20 •Optimal for machining of Ni based HRSA such
Endmill R
as Inconel, Hastelloy, Waspaloy, etc.
162 Items
S
•Endmill for titanium and stainless steel cutting
Super F
Titanium 2/4 1.0~20 •Longer tool life : high toughness substrate and high
Endmill R
lubrication coating layer
64 Items
Non-ferrous F •Effective chip evacuation in high feed machining

A-Star with U-shape
metal, B 2~3 1.0~20
Endmill
Aluminum R •Double relief angle (stronger cutting edge)
330 Items
Composite •Router for composite material machining

Composite F
Router 2~8 4.0~12 •High performance due to Nano-Crystalline
materials
Endmill dia-coating
44 Items
N
F •Longer tool life due to high hardness dia-coating
Graphite, D
B 2~4 0.6~12 •Applying one-pass grinding and
Ceramics Endmill
R good surface finish
280 Items
Dental, •Endmill for machining materials for stooping teeth,

metal, T Zirconia, Titanium, Co-Cr, Wax, PMMA, etc.
B 2 0.6~3
wax, Endmill •Applicable to dental milling machine and various
Zirconia materials for stooping teeth
11 Items
For
general
machin- R+ R •Endmill with a shape minimizing cutting
ing with Roughing 2~4 5.0~25
Endmill load for roughing
special
function 204 Items
KORLOY
Y 23
KORLOY Endmill
Workpiece
Size (Ø)
P M K N S H
No.
Heat resistant alloy,

Stainless steel
Non-ferrous metal
Type Used Shape Designation Figure Coated of page
Hardened steel
Titanium alloy
Cast iron
flute
Steel
Min Max
Flat SFES SL 4 3.0 20.0 ◎ 31

HRSA
Radius SRES SL 4 3.0 20.0 ◎ 32
Super Endmill
Flat SFET UL 4 3.0 20.0 ◎ ◎ 35
Radius SRET UL 4 3.0 20.0 ◎ ◎ 36

Ti/STS
SBET UL 2 1.0 12.0 ◎ ◎ 37
SBET
SBET UL 4 4.0 12.0 ◎ ◎ 38
ESB702 AlTiN 2 0.1 12.0 ◎ ◎ ○ ◎ 41
ESB712 AlTiN 2 1.0 12.0 ◎ ◎ ○ ◎ 42

Ball
ESB703 AlTiN 3 2.0 12.0 ◎ ◎ ○ ◎ 43
ESB734 AlTiN 4 2.0 10.0 ◎ ◎ ○ ◎ 44
ESE702 AlTiN 2 0.1 20.0 ◎ ◎ ○ ◎ 45
ESE712 AlTiN 2 1.0 6.0 ◎ ◎ ○ ◎ 46
ESE704 AlTiN 4 1.0 20.0 ◎ ◎ ○ ◎ 47
Flat ESE714 AlTiN 4 1.0 12.0 ◎ ◎ ○ ◎ 48

H-Star Endmill
High speed, ESE724(6) AlTiN 4/6 1.0 12.0 ◎ ◎ ○ ◎ 49

High
hardness ESE744 AlTiN 4 1.0 12.0 ◎ ◎ ○ ◎ 50
ESE716 AlTiN 6 6.0 20.0 ◎ ◎ ○ ◎ 51
ESR702 AlTiN 2 1.0 12.0 ◎ ◎ ○ ◎ 52
ESR732 AlTiN 2 1.0 12.0 ◎ ◎ ○ ◎ 55
ESR704 AlTiN 4 1.0 12.0 ◎ ◎ ○ ◎ 56
Radius ESR714 AlTiN 4 3.0 12.0 ◎ ◎ ○ ◎ 58
ESR724 AlTiN 4 6.0 12.0 ◎ ◎ ○ ◎ 59
ESR734 AlTiN 4 1.0 12.0 ◎ ◎ ○ ◎ 60
ESR706 AlTiN 6 6.0 12.0 ◎ ◎ ○ ◎ 61
◎: Excellent ○: Good
24 KORLOY
Workpiece
Size (Ø)
P M K N S H
No.

Stainless steel
Non-ferrous metal
Hardened steel
Titanium alloy
Cast iron
flute
Steel
Min Max
Radius ESR736 AlTiN 6 6.0 12.0 ◎ ◎ ○ ◎ 62
Rib ball ESRB712 AlTiN 2 0.1 12.0 ◎ ◎ ○ ◎ 63
ESRE712 AlTiN 2 0.1 12.0 ◎ ◎ ○ ◎ 67

Rib flat
ESRE714 AlTiN 4 0.5 12.0 ◎ ◎ ○ ◎ 70
ESRR712 AlTiN 2 0.2 16.0 ◎ ◎ ○ ◎ 73

Rib radius
ESRR714 AlTiN 4 0.5 20.0 ◎ ◎ ○ ◎ 79
ESXE704 AlTiN 4 1.0 12.0 ◎ ◎ ○ ◎ 86

Flat
H-Star Endmill
ESXE714 AlTiN 4 2.0 12.0 ◎ ◎ ○ ◎ 87

High speed,
High Radius ESXR704 AlTiN 4 2.0 12.0 ◎ ◎ ○ ◎ 88
hardness
ESLNB20 AlTiN 2 0.1 5.0 ◎ ◎ ○ ◎ 89
Rib ball ESTNB20 AlTiN 2 0.2 10.0 ◎ ◎ ○ ◎ 93
ESTNB30 AlTiN 3 2.0 5.0 ◎ ◎ ○ ◎ 97
ESLNS20 AlTiN 2 0.1 5.0 ◎ ◎ ○ ◎ 99

Rib flat
ESLNS40 AlTiN 4 1.0 5.0 ◎ ◎ ○ ◎ 103
ESLNR AlTiN 2 0.2 3.0 ◎ ◎ ○ ◎ 105

Rib radius
ESTNR AlTiN 2 0.2 3.0 ◎ ◎ ○ ◎ 109
High feed ESPM4 AlTiN 4 3.0 12.0 ◎ ◎ ○ ◎ 111
UE502 AlCrN 2 0.1 25.0 ◎ ○ ○ ◎ 115
UE512 AlCrN 2 0.1 12.0 ◎ ○ ○ ◎ 117
UE522 AlCrN 2 1.0 25.0 ◎ ○ ○ ◎ 120

U-Star Endmill
General Flat UXE502 AlCrN 2 0.1 20.0 ◎ ○ ○ ◎ 122
UE504H AlCrN 4 1.0 20.0 ◎ ○ ○ ◎ 124
UE514 AlCrN 4 1.0 12.0 ◎ ○ ○ ◎ 125
UE524 AlCrN 4 1.0 25.0 ◎ ○ ○ ◎ 127
KORLOY
Y 25
KORLOY Endmill
Workpiece
Size (Ø)
P M K N S H
No.

Stainless steel
Non-ferrous metal
Hardened steel
Titanium alloy
Cast iron
flute
Steel
Min Max
ULE504 AlCrN 4 3.0 16.0 ◎ ○ ○ ◎ 129
UE504 AlCrN 4 0.8 25.0 ◎ ○ ○ ◎ 130
UXE504 AlCrN 4 1.0 20.0 ◎ ○ ○ ◎ 131

Flat
UE506 AlCrN 6 6.0 20.0 ◎ ○ ○ ◎ 132
UTE502 AlCrN 2 0.3 10.0 ◎ ○ ○ ◎ 133
UTE504 AlCrN 4 0.8 10.0 ◎ ○ ○ ◎ 135
UR502 AlCrN 2 0.2 20.0 ◎ ○ ○ ◎ 138
UR512 AlCrN 2 0.2 20.0 ◎ ○ ○ ◎ 141
UR542 AlCrN 2 0.2 4.0 ◎ ○ ○ ◎ 147
UR504 AlCrN 4 3.0 20.0 ◎ ○ ○ ◎ 153
UR544 AlCrN 4 1.0 4.0 ◎ ○ ○ ◎ 154
Radius UXR504 AlCrN 4 1.0 20.0 ◎ ○ ○ ◎ 158

U-Star Endmill
UXR514 AlCrN 4 1.0 20.0 ◎ ○ ○ ◎ 161

General
UR506 AlCrN 6 6.0 20.0 ◎ ○ ○ ◎ 166
UDR503 AlCrN 3 6.0 20.0 ◎ ○ ○ ◎ 167
USPM4 AlCrN 4 1.0 20.0 ◎ ○ ○ ◎ 168
UTR504 AlCrN 4 0.8 2.5 ◎ ○ ○ ◎ 169
UB502 AlCrN 2 1.0 25.0 ◎ ○ ○ ◎ 173
UB502---P AlCrN 2 0.1 12.0 ◎ ○ ○ ◎ 175
UB512 AlCrN 2 0.1 12.0 ◎ ○ ○ ◎ 176
UB512S6 AlCrN 2 0.5 2.0 ◎ ○ ○ ◎ 180
Ball UB532 AlCrN 2 3.0 12.0 ◎ ○ ○ ◎ 181
UB542 AlCrN 2 0.1 12.0 ◎ ○ ○ ◎ 182
USB502 AlCrN 2 3.0 20.0 ◎ ○ ○ ◎ 189
UB503 AlCrN 3 1.0 12.0 ◎ ○ ○ ◎ 190
UB504 AlCrN 4 1.0 12.0 ◎ ○ ○ ◎ 191
26 KORLOY
Solid tools
ool
○ solution _ part 1 Endmill Drill Reamer Chamfer Thread
Workpiece
Size (Ø)
P M K N S H
No.

Stainless steel
Non-ferrous metal
Hardened steel
Titanium alloy
Cast iron
flute
Steel
Min Max
Ball UTB502 AlCrN 2 0.3 2.0 ◎ ○ ○ ◎ 192

U-Star Endmill
UF50 AlCrN 3~5 3.0 25.0 ◎ ○ ○ ◎ 193

General
Roughing UF51 AlCrN 3~5 3.0 25.0 ◎ ○ ○ ◎ 194
UF51---H AlCrN 3~5 3.0 25.0 ◎ ○ ○ ◎ 195
DB312 AlTiN 2 1.0 20.0 ◎ ○ ◎ ○ 198

Ball
DB342 AlTiN 2 1.0 12.0 ◎ ○ ◎ ○ 199
TX202 AlTiN 2 1.0 20.0 ◎ ○ ◎ ○ 200
TX204 AlTiN 4 1.0 20.0 ◎ ○ ◎ ○ 201
TX222 AlTiN 2 3.0 20.0 ◎ ○ ◎ ○ 202
Flat TX224 AlTiN 4 3.0 20.0 ◎ ○ ◎ ○ 203
TX302 AlTiN 2 1.0 20.0 ◎ ○ ◎ ○ 204
TX304 AlTiN 4 1.0 20.0 ◎ ○ ◎ ○ 205
TX304H AlTiN 4 3.0 20.0 ◎ ○ ◎ ○ 206

G-Star Endmill
TXB202 AlTiN 2 1.0 20.0 ◎ ○ ◎ ○ 207
General TXB204 AlTiN 4 2.0 20.0 ◎ ○ ◎ ○ 208
TXB222 AlTiN 2 3.0 20.0 ◎ ○ ◎ ○ 209

Ball
TXB232 AlTiN 2 3.0 20.0 ◎ ○ ◎ ○ 210
TXB302 AlTiN 2 1.0 20.0 ◎ ○ ◎ ○ 211
TXB304 AlTiN 4 1.0 20.0 ◎ ○ ◎ ○ 212
ZE302P AlTiN 2 1.0 20.0 ◎ ○ ◎ ○ 213
ZE304P AlTiN 4 1.0 20.0 ◎ ○ ◎ ○ 214

Flat
ZE322 AlTiN 2 3.0 20.0 ◎ ○ ◎ ○ 215
ZE324 AlTiN 4 3.0 20.0 ◎ ○ ◎ ○ 216
ZR304H AlTiN 4 3.0 12.0 ◎ ○ ◎ ○ 217

Radius
ZR322 AlTiN 2 3.0 12.0 ◎ ○ ◎ ○ 218
KORLOY
Y 27
KORLOY Endmill
Workpiece
Size (Ø)
P M K N S H
No.

Stainless steel
Non-ferrous metal
Hardened steel
Titanium alloy
Cast iron
flute
Steel
Min Max
3.0 12.0 ◎ ○ ◎ ○
Endmill
ZR324 AlTiN 4 219

G-Star
General Radius
ZR324H AlTiN 4 6.0 12.0 ◎ ○ ◎ ○ 220
Carbide,
Aluminum RPAE
Non
3 6.0 25.0 ◎ 222
Carbide,
RPE-FP-H 4 5.0 20.0 ◎ ○ ◎ ○ 222
TiAIN
Carbide,
RPLE-FP-H 4 5.0 20.0 ◎ ○ ◎ ○ 223
TiAIN
Carbide,
RPE-XG 4 5.0 20.0 ◎ ○ ◎ ○ 223
TiAIN
R+ Endmill
Carbide,
RPE-FP-L 4 5.0 20.0 ◎ ○ ◎ ○ 224
TiAIN
Roughing
Carbide,
General RPE-RG 4 5.0 20.0 ◎ ○ ◎ ○ 224
TiAICrN
RPE-RG HSS, TiAIN 4 6.0 20.0 ◎ ○ ◎ ○ 225
RPE-FF HSS, TiAIN 4 6.0 20.0 ◎ ○ ◎ ○ 225
RPE-FP HSS, TiAIN 4 6.0 20.0 ◎ ○ ◎ ○ 226
HSS, TiCN
RPE-RG HSS, TiN 4 6.0 50.0 ◎ ○ ◎ ○ 227
SE502 AlCrN 2 1.0 20.0 ○ ◎ ○ 231
SE503 AlCrN 3 1.0 20.0 ○ ◎ ○ 232

Flat
SE504 AlCrN 4 1.0 20.0 ○ ◎ ○ 233
SE506 AlCrN 6 6.0 20.0 ○ ◎ ○ 234

S-Star Endmill
SR504 AlCrN 4 1.0 20.0 ○ ◎ ○ 235

STS
Radius SR505 AlCrN 5 6.0 20.0 ○ ◎ ○ 236
SR507 AlCrN 7 6.0 20.0 ○ ◎ ○ 237
SB502 AlCrN 2 1.0 12.0 ○ ◎ ○ 238

Ball
SB504 AlCrN 4 3.0 20.0 ○ ◎ ○ 239
Roughing SF51H AlCrN 3~5 3.0 20.0 ○ ◎ ○ 240

A-Star Endmill
Ball WAB312 Non 2 6.0 20.0 ○ ◎ 243
Aluminum WAE301 Non 1 0.2 12.0 ○ ◎ 244

Flat
WAE302 Non 2 1.0 25.0 ○ ◎ 245
28 KORLOY
Workpiece
Size (Ø)
P M K N S H
No.

Stainless steel
Non-ferrous metal
Hardened steel
Titanium alloy
Cast iron
flute
Steel
Min Max
Flat WAE30(2)3 Non 3 1.0 25.0 ○ ◎ 246
WAR302 Non 2 6.0 20.0 ○ ◎ 248

A-Star Endmill
Radius WAR303 Non 3 6.0 20.0 ○ ◎ 249

Aluminum
WAR502 Non 2 1.0 12.0 ○ ◎ 250
Radius WAR503 Non 3 4.0 20.0 ○ ◎ 251
Roughing WAF303 Non 3 4.0 20.0 ○ ◎ 252
Diamond 2 1.0 12.0 ◎ 254

Flat DFE
Diamond 4 2.0 12.0 ◎ 255
D Endmill
Diamond 2 0.5 3.0 ◎ 256

Graphite,
Radius DRE
Ceramics
Diamond 4 4.0 12.0 ◎ 257
Diamond 2 0.6 12.0 ◎ 258

Ball DBE
Diamond 4 2.0 12.0 ◎ 260
Diamond 4 6.0 8.0 ◎ 263

CCDR
Diamond 6 10.0 12.0 ◎ 263
Diamond 4 6.0 8.0 ◎ 264

Router Endmill
CCHR
Composite
Diamond 6 10.0 12.0 ◎ 264

Composite
Flat
CFRP, GFRP
CCR Diamond 2 4.0 12.0 ◎ 265
CCLR Diamond 4 4.0 12.0 ◎ 266
Diamond 6 6.0 8.0 ◎ 267

CCRR
Diamond 8 10.0 12.0 ◎ 267
Dental,
Zirconia
Ball TZBE Diamond 2 0.6 3.0 ◎ 268
T Endmill
Dental,
Metal
TTBE Diamond 2 0.6 3.0 ◎ 268
Ball
Dental,
Wax
TWBE - 2 0.6 3.0 ◎ 268
◎
Endmill
- 1 4.6 6.0 271

PCD
Nonferrous,
Flat PDE
High speed
- 2 6.0 12.0 ◎ 271
KORLOY
Y 29
Super Endmill
Endmill for Ni series HRSA machining (Inconel, Hasteloy, Waspaloy and etc.)
Super Endmill For HRSA
t Super Endmill For HRSA increases cutting performance and cutting stability applying positive rake angle
and irregular flute spacing. Also, the new coating layer with high hardness controls fracture in cutting edge
and ensures long tool life for HRSA machining by its increased wear resistance.
Code system
S RE S 4 120 080 R30

Super Type Workpiece No. of flutes Tool diameter Overall length Corner R
Endmill
FE: Flat Endmill S: Super alloy 4: 4 Flute 120: Ø12.0 mm 080: 80 mm R30: 30 mm
RE: Radius Endmill t Inconel718
BE: Ball Endmill
t Waspaloy
t Hastelloy
T: Titanium/STS
Features
t Aerospace and generation industries : Exclusive Endmill series for HRSA workpieces engine, turbine parts and etc.
t Sharp cutting edge : Reducing cutting load and suppression of work hardening
t Longer tool life : Applying high toughness substrate and new grade with high wear resistance
SRES4000 (Radius) SFES4000 (Flat)
A° B° C° D°
A° ≠ B° C° ≠ D°
Irregular flute spacing shape Corner gash

- Reduced chattering and vibration land shape
- Prevent fracture on the
corner edge
High rigidity core web design
- Enhancing cutting stability and chip evacuation
Grade features
SL coating (Ultra Lubricating coating)

t Applying high lubrication coating and special surface treatment technology
- Increased welding resistance, chipping resistance and cutting stability by surface
treatment technology
30 KORLOY
ES4000 (Flat)
SFES400 t50-&3"/$&
DATA ØD Ød
35 /38 SL Ø1 ~ Ø6 0 ~ -0.015mm
Coating h6
HELIX Ø6.1 ~ Ø20 0 ~ -0.02mm
(mm)
Designation ØD Ød ℓ L
SFES4030-050 3 6 8 50
SFES4040-050 4 6 10 50
SFES4050-060 5 6 15 60
SFES4060-060 6 6 15 60
SFES4080-070 8 8 20 70
SFES4100-075 10 10 25 75
SFES4120-080 12 12 30 80
SFES4140-100 14 14 35 90
SFES4160-100 16 16 42 100
SFES4200-100 20 20 48 100
KORLOY
Y 31
Endmill
ES4000 (Radius)
SRES400 t50-&3"/$&
ØD Ød
35 /38 R SL DATA
Ø1 ~ Ø6 0 ~ -0.015mm
±0.01 Coating h5
HELIX Ø6.1 ~ Ø20 0 ~ -0.02mm
Corner R
(mm)
Designation ØD Ød ℓ L r Designation ØD Ød ℓ L r
SRES4030-055-R02 3 6 8 55 0.2 SRES4080-100-R05 8 8 20 100 0.5

SRES4030-055-R03 3 6 8 55 0.3 SRES4080-100-R08 8 8 20 100 0.8
SRES4030-055-R05 3 6 8 55 0.5 SRES4080-100-R10 8 8 20 100 1.0
SRES4040-055-R02 4 6 10 55 0.2 SRES4080-100-R15 8 8 20 100 1.5
SRES4040-055-R03 4 6 10 55 0.3 SRES4080-100-R20 8 8 20 100 2.0
SRES4040-055-R05 4 6 10 55 0.5 SRES4080-100-R25 8 8 20 100 2.5
SRES4040-070-R02 4 6 10 70 0.2 SRES4080-100-R30 8 8 20 100 3.0
SRES4040-070-R03 4 6 10 70 0.3 SRES4100-075-R03 10 10 25 75 0.3
SRES4040-070-R05 4 6 10 70 0.5 SRES4100-075-R05 10 10 25 75 0.5
SRES4050-055-R02 5 6 15 55 0.2 SRES4100-075-R08 10 10 25 75 0.8
SRES4050-055-R03 5 6 15 55 0.3 SRES4100-075-R10 10 10 25 75 1.0
SRES4050-055-R05 5 6 15 55 0.5 SRES4100-075-R15 10 10 25 75 1.5
SRES4050-090-R02 5 6 15 90 0.2 SRES4100-075-R20 10 10 25 75 2.0
SRES4050-090-R03 5 6 15 90 0.3 SRES4100-075-R25 10 10 25 75 2.5
SRES4050-090-R05 5 6 15 90 0.5 SRES4100-075-R30 10 10 25 75 3.0
SRES4060-060-R03 6 6 15 60 0.3 SRES4100-100-R03 10 10 25 100 0.3
SRES4060-060-R05 6 6 15 60 0.5 SRES4100-100-R05 10 10 25 100 0.5
SRES4060-060-R08 6 6 15 60 0.8 SRES4100-100-R08 10 10 25 100 0.8
SRES4060-060-R10 6 6 15 60 1.0 SRES4100-100-R10 10 10 25 100 1.0
SRES4060-060-R15 6 6 15 60 1.5 SRES4100-100-R15 10 10 25 100 1.5
SRES4060-060-R20 6 6 15 60 2.0 SRES4100-100-R20 10 10 25 100 2.0
SRES4060-090-R03 6 6 15 90 0.3 SRES4100-100-R25 10 10 25 100 2.5
SRES4060-090-R05 6 6 15 90 0.5 SRES4100-100-R30 10 10 25 100 3.0
SRES4060-090-R08 6 6 15 90 0.8 SRES4120-080-R05 12 12 30 80 0.5
SRES4060-090-R10 6 6 15 90 1.0 SRES4120-080-R08 12 12 30 80 0.8
SRES4060-090-R15 6 6 15 90 1.5 SRES4120-080-R10 12 12 30 80 1.0
SRES4060-090-R20 6 6 15 90 2.0 SRES4120-080-R15 12 12 30 80 1.5
SRES4080-070-R03 8 8 20 70 0.3 SRES4120-080-R20 12 12 30 80 2.0
SRES4080-070-R05 8 8 20 70 0.5 SRES4120-080-R25 12 12 30 80 2.5
SRES4080-070-R08 8 8 20 70 0.8 SRES4120-080-R30 12 12 30 80 3.0
SRES4080-070-R10 8 8 20 70 1.0 SRES4120-080-R35 12 12 30 80 3.5
SRES4080-070-R15 8 8 20 70 1.5 SRES4120-080-R40 12 12 30 80 4.0
SRES4080-070-R20 8 8 20 70 2.0 SRES4120-110-R05 12 12 30 110 0.5
SRES4080-070-R25 8 8 20 70 2.5 SRES4120-110-R08 12 12 30 110 0.8
SRES4080-070-R30 8 8 20 70 3.0 SRES4120-110-R10 12 12 30 110 1.0
SRES4080-100-R03 8 8 20 100 0.3 SRES4120-110-R15 12 12 30 110 1.5
32 KORLOY
ES4000 (Radius)
SRES400 t50-&3"/$&
ØD Ød
35 /38 R SL DATA
Ø1 ~ Ø6 0 ~ -0.015mm
±0.01 Coating h5
HELIX Ø6.1 ~ Ø20 0 ~ -0.02mm
Corner R
Designation ØD Ød ℓ L r Designation ØD Ød ℓ L r
SRES4120-110-R20 12 12 30 110 2.0 SRES4160-150-R40 16 16 42 150 4.0

SRES4120-110-R25 12 12 30 110 2.5 SRES4160-150-R50 16 16 42 150 5.0
SRES4120-110-R30 12 12 30 110 3.0 SRES4160-150-R60 16 16 42 150 6.0
SRES4120-110-R35 12 12 30 110 3.5 SRES4180-100-R05 18 20 45 100 0.5
SRES4120-110-R40 12 12 30 110 4.0 SRES4180-100-R08 18 20 45 100 0.8
SRES4140-090-R05 14 14 35 90 0.5 SRES4180-100-R10 18 20 45 100 1.0
SRES4140-090-R08 14 14 35 90 0.8 SRES4180-100-R15 18 20 45 100 1.5
SRES4140-090-R10 14 14 35 90 1.0 SRES4180-100-R20 18 20 45 100 2.0
SRES4140-090-R15 14 14 35 90 1.5 SRES4180-100-R30 18 20 45 100 3.0
SRES4140-090-R20 14 14 35 90 2.0 SRES4180-150-R05 18 20 45 150 0.5
SRES4140-090-R30 14 14 35 90 3.0 SRES4180-150-R08 18 20 45 150 0.8
SRES4140-150-R05 14 14 35 150 0.5 SRES4180-150-R10 18 20 45 150 1.0
SRES4140-150-R08 14 14 35 150 0.8 SRES4180-150-R15 18 20 45 150 1.5
SRES4140-150-R10 14 14 35 150 1.0 SRES4180-150-R20 18 20 45 150 2.0
SRES4140-150-R15 14 14 35 150 1.5 SRES4180-150-R30 18 20 45 150 3.0
SRES4140-150-R20 14 14 35 150 2.0 SRES4200-100-R05 20 20 48 100 0.5
SRES4140-150-R30 14 14 35 150 3.0 SRES4200-100-R10 20 20 48 100 1.0
SRES4160-100-R05 16 16 42 100 0.5 SRES4200-100-R15 20 20 48 100 1.5
SRES4160-100-R08 16 16 42 100 0.8 SRES4200-100-R20 20 20 48 100 2.0
SRES4160-100-R10 16 16 42 100 1.0 SRES4200-100-R25 20 20 48 100 2.5
SRES4160-100-R15 16 16 42 100 1.5 SRES4200-100-R30 20 20 48 100 3.0
SRES4160-100-R20 16 16 42 100 2.0 SRES4200-100-R35 20 20 48 100 3.5
SRES4160-100-R25 16 16 42 100 2.5 SRES4200-100-R40 20 20 48 100 4.0
SRES4160-100-R30 16 16 42 100 3.0 SRES4200-100-R50 20 20 48 100 5.0
SRES4160-100-R35 16 16 42 100 3.5 SRES4200-100-R60 20 20 48 100 6.0
SRES4160-100-R40 16 16 42 100 4.0 SRES4200-150-R05 20 20 48 150 0.5
SRES4160-100-R50 16 16 42 100 5.0 SRES4200-150-R10 20 20 48 150 1.0
SRES4160-100-R60 16 16 42 100 6.0 SRES4200-150-R15 20 20 48 150 1.5
SRES4160-150-R05 16 16 42 150 0.5 SRES4200-150-R20 20 20 48 150 2.0
SRES4160-150-R08 16 16 42 150 0.8 SRES4200-150-R25 20 20 48 150 2.5
SRES4160-150-R10 16 16 42 150 1.0 SRES4200-150-R30 20 20 48 150 3.0
SRES4160-150-R15 16 16 42 150 1.5 SRES4200-150-R35 20 20 48 150 3.5
SRES4160-150-R20 16 16 42 150 2.0 SRES4200-150-R40 20 20 48 150 4.0
SRES4160-150-R25 16 16 42 150 2.5 SRES4200-150-R50 20 20 48 150 5.0
SRES4160-150-R30 16 16 42 150 3.0 SRES4200-150-R60 20 20 48 150 6.0
SRES4160-150-R35 16 16 42 150 3.5
KORLOY
Y 33
Endmill
Super Endmill For Ti
Endmills series for difficult-to-cut materials

t With its optimal edge structure for Titanium machining and enlarged chip pocket in flutes
design, Super Endmill For Ti reduces cutting load and cutting heat and it improves chip
evacuation. In addition, applying high toughness substrate and high lubrication coating layer
minimizing irregular tool fracture and welding ensure maximized tool life.
Code system
S RE T 4 120 080 R30

Super Type Workpiece No. of flutes Tool diameter Overall length Corner R
Endmill
FE : Flat Endmill T : Titanium/STS 4: 4 Flute 120: Ø12.0 mm 080: 80 mm R30: 30 mm
RE : Radius Endmill S : Super alloy
BE : Ball Endmill t Inconel718
t Waspaloy
t Hastelloy
Features
t Endmill for titanium and stainless steel cutting
t Longer tool life : high toughness substrate and high lubrication coating layer
SFET (Flat) / SRET (Radius) SBET (Ball)
A° B° A° B°
C° D° C° D°
A° ≠ B° C° ≠ D° A° ≠ B° C° ≠ D°
Irregular flute spacing shape

- Reduced chattering and vibration
Large chip pocket

S-curve cutting edge
and streamlined flute design
- Reduced cutting load
- Good chip evacuation
Grade features
UL coating (Ultra Lubricating coating)

t Enhanced chip control and welding resistance by exclusive lubrication coating technology
t High chipping resistance substrate
34 KORLOY
ET4000 (Flat)
SFET400 t50-&3"/$&
DATA ØD Ød
35 /38 UL Ø1 ~ Ø6 0 ~ -0.015mm
Coating h6
HELIX Ø6.1 ~ Ø20 0 ~ -0.020mm
(mm)
SFET4030-050 3 6 8 50
SFET4040-050 4 6 10 50
SFET4050-060 5 6 15 60
SFET4060-060 6 6 15 60
SFET4080-070 8 8 20 70
SFET4100-075 10 10 25 75
SFET4120-080 12 12 30 80
SFET4160-100 16 16 42 100
SFET4200-100 20 20 48 100
KORLOY
Y 35
Endmill
ET4000 (Radius)
SRET400 t50-&3"/$&
DATA ØD Ød
35 /38 UL Ø1 ~ Ø6 0 ~ -0.015mm
Coating h6
HELIX Ø6.1 ~ Ø20 0 ~ -0.020mm
Designation ØD Ød ℓ L r
SRET4030-050-R02 3 6 8 50 0.2
SRET4030-050-R05 3 6 8 50 0.5
SRET4040-050-R02 4 6 10 50 0.2
SRET4040-050-R05 4 6 10 50 0.5
SRET4050-060-R02 5 6 15 60 0.2
SRET4050-060-R05 5 6 15 60 0.5
SRET4050-060-R10 5 6 15 60 1
SRET4060-060-R03 6 6 15 60 0.3
SRET4060-060-R05 6 6 15 60 0.5
SRET4060-060-R10 6 6 15 60 1
SRET4080-070-R03 8 8 20 70 0.3
SRET4080-070-R05 8 8 20 70 0.5
SRET4080-070-R10 8 8 20 70 1
SRET4100-075-R03 10 10 25 75 0.3
SRET4100-075-R05 10 10 25 75 0.5
SRET4100-075-R10 10 10 25 75 1
SRET4100-075-R15 10 10 25 75 1.5
SRET4100-075-R20 10 10 25 75 2
SRET4120-080-R05 12 12 30 80 0.5
SRET4120-080-R10 12 12 30 80 1
SRET4120-080-R15 12 12 30 80 1.5
SRET4120-080-R20 12 12 30 80 2
SRET4120-080-R25 12 12 30 80 2.5
SRET4120-080-R30 12 12 30 80 3
SRET4160-100-R05 16 16 42 100 0.5
SRET4160-100-R10 16 16 42 100 1
SRET4200-100-R05 20 20 48 100 0.5
SRET4200-100-R10 20 20 48 100 1
36 KORLOY
ET2000 (Ball)
SBET200 t50-&3"/$&
DATA ØD Ød
30 R UL Ø1 ~ Ø6 0 ~ -0.015mm
±0.01 Coating h6
HELIX Ø6.1 ~ Ø20 0 ~ -0.020mm
r tolerance
(mm)
SBET2010-050 1 6 1 50 0.5
SBET2020-050 2 6 2 50 1
SBET2030-050 3 6 3 50 1.5
SBET2040-050 4 6 8 50 2
SBET2040-070 4 6 8 70 2
SBET2050-060 5 6 12 60 2.5
SBET2050-080 5 6 12 80 2.5
SBET2060-060 6 6 12 60 3
SBET2060-090 6 6 12 90 3
SBET2080-070 8 8 16 70 4
SBET2080-100 8 8 16 100 4
SBET2100-075 10 10 20 75 5
SBET2100-100 10 10 20 100 5
SBET2120-080 12 12 25 80 6
SBET2120-100 12 12 25 100 6
KORLOY
Y 37
Endmill
ET4000 (Ball)
SBET400 t50-&3"/$&
DATA ØD Ød
38 /40 R UL Ø1 ~ Ø6 0 ~ -0.015mm
±0.01 Coating h6
HELIX Ø6.1 ~ Ø20 0 ~ -0.020mm
r tolerance
SBET4040-050 4 6 8 50 2.0
SBET4040-070 4 6 8 70 2.0
SBET4050-060 5 6 12 60 2.5
SBET4050-080 5 6 12 80 2.5
SBET4060-060 6 6 12 60 3.0
SBET4060-090 6 6 12 90 3.0
SBET4080-070 8 8 16 70 4.0
SBET4080-100 8 8 16 100 4.0
SBET4100-075 10 10 20 75 5.0
SBET4100-100 10 10 20 100 5.0
SBET4120-080 12 12 25 80 6.0
SBET4120-100 12 12 25 100 6.0
38 KORLOY
For high hardness
H-Star Endmill
t High hardness coating layer - Ensuring stable cutting from high Si content, increased wear resistance and
frictional heat resistance due to applying a new AlTiSiN series coating layer
t High hardness substrate - Containing ultra-fine WC + Co 9% and expanded general application range
by maximizing cutting edge feature
t Edge treatment - Increased chipping resistance in the beginning of high hardness steel cutting and
enhanced wear resistance lead to stable cutting
Features
t High hardness coating layer t Edge treatment
After Before
- High Si content - Enhancing chipping resistance in the beginning of

- Enhanced wear resistance high hardness steel cutting
- Stable cutting through frictional heat - Increased wear resistance and stable cutting performance
resistance increase
t High hardness substrate
- Ultra-fine WC + Co 9%
- Expanded general application range by
maximizing cutting edge feature
Code system
ES R 7 0 4 100 15 32 10
H-Star Grade No. of flutes Corner R Shank Dia.
Endmill 7 : Grade 2 : 2 flutes 05 : 0.5 mm 6 : Ø6.0 mm
Type 3 : 3 flutes 15 : 1.5 mm 10 : Ø10.0 mm
4 : 4 flutes 20 : 2.0 mm 12 : Ø12.0 mm
B : Ball
6 : 6 flutes
E : Flat
R : Radius
Length, Effective
XE : Flat (irregular flute spacing) Shank type Tool dia. length
XR : Radius (irregular flute spacing)
0 : Neck 010 : Ø1.0 mm 10 : 10 mm
PM : Power mill
1 : Straight, neck 060 : Ø6.0 mm 12 : 12 mm
RB : Rib ball
2 : Long shank neck 065 : Ø6.5 mm 32 : 32 mm
RE : Rib flat
3 : Long shank 100 : Ø10.0 mm
RR : Rib radius
LNB : Long neck ball 4 : Helix 35°
TNB : Taper neck ball
LNS : Long neck flat
LNR : Long neck radius
KORLOY
Y 39
Endmill
H-Star Endmill
&%1/0 Appearance Type Range Page
ESB702 2 Flutes neck type ball endmill Ø0.1 ~ 12.0 41
ESB712 2 Flutes ball endmill Ø1.0 ~ 12.0 42
ESB703 3 Flutes neck type ball endmill Ø2.0 ~ 12.0 43
ESB734 4 Flutes 15° helix ball endmill Ø2.0 ~ 10.0 44
ESE702 2 Flutes neck type flat endmill Ø0.1 ~ 20.0 45
ESE712 2 Flutes flat endmill Ø1.0 ~ 12.0 46
ESE704 4 Flutes neck type flat endmill Ø1.0 ~ 20.0 47
ESE714 4 Flutes high helix flat endmill Ø1.0 ~ 12.0 48
ESE724 ( 6 ) 4&6 Flutes neck type flat endmill Ø1.0 ~ 12.0 49
ESR702 2 Flutes neck type radius endmill Ø1.0 ~ 12.0 52~54
ESR732 2 Flutes long shank radius endmill Ø1.0 ~ 12.0 55
ESR704 4 Flutes neck type radius endmill Ø1.0 ~ 12.0 56
ESR714 4 Flutes radius endmill Ø3.0 ~ 12.0 58
ESR734 4 Flutes long shank radius endmill Ø1.0 ~ 12.0 60
ESR736 6 Flutes radius endmill Ø6.0 ~ 12.0 62
ESRB712 2 Flutes rib ball endmill Ø0.1 ~ 12.0 63~66
ESRE712 2 Flutes rib neck type flat endmill Ø0.1 ~ 12.0 67~69
ESRE714 4 Flutes rib sqaure endmill Ø0.5 ~ 12.0 70~72
ESRR712 2 Flutes rib radius endmill Ø0.2 ~ 16.0 73~78
ESRR714 4 Flutes rib radius endmill Ø0.5 ~ 20.0 79~85
ESXE704 4 Flutes neck type flat endmill Ø1.0 ~ 12.0 86
ESXE714 4 Flutes flat endmill Ø2.0 ~ 12.0 87
ESXR704 4 Flutes neck type radius endmill Ø1.0 ~ 12.0 88
ESLNB20 2 Flutes long neck type ball endmill Ø0.1 ~ 5.0 89~92
ESTNB20 2 Flutes tapered neck type ball endmill Ø0.2 ~ 10.0 93~96
ESTNB30 3 Flutes tapered neck type ball endmill Ø2.0 ~ 5.0 97~98
ESLNS20 2 Flutes long neck type flat endmill Ø0.1 ~ 5.0 99~102
ESLNS40 4 Flutes long neck type flat endmill Ø1.0 ~ 5.0 103~104
ESLNR 2 Flutes long neck type radius endmill Ø0.2 ~ 3.0 105~108
ESTNR 2 Flutes tapered neck type radius endmill Ø0.2 ~ 3.0 109~110
ESPM4 4 Flutes neck type radius endmill Ø3.0 ~ 12.0 111
40 KORLOY
ESB
SB702 2 Flutes neck type ball endmill
t50-&3"/$&
ØD Ød
ULTRA 30 R R AlTiN
DATA
~ Ø6 0 ~ -0.012mm
FINE ±0.005 ±0.008 h5
HELIX Ø8 ~ Ø12 0 ~ -0.015mm
R3 or Under Above R3 p.413
13°
1
R 2
(mm)
Designation R ØD Ød ℓ1 ℓ2 L
ESB702001 0.05 0.1 4 0.15 - 40

ESB702002 0.1 0.2 4 0.3 - 40
ESB702003 0.15 0.3 4 0.5 - 40
ESB702004 0.2 0.4 4 0.6 - 40
ESB702005 0.25 0.5 4 0.7 - 40
ESB702006 0.3 0.6 4 0.9 - 40
ESB702007 0.35 0.7 4 1.1 - 40
ESB702008 0.4 0.8 4 1.2 - 40
ESB702009 0.45 0.9 4 1.4 - 40
ESB702010 0.5 1 6 1.5 3 50
ESB702010S4 0.5 1 4 1.5 - 45
ESB702015 0.75 1.5 6 2 4 50
ESB702015S4 0.75 1.5 4 2 - 45
ESB702020 1 2 6 2.5 5 50
ESB702020S4 1 2 4 2.5 - 45
ESB702025 1.25 2.5 6 3 7 50
ESB702030 1.5 3 6 4 10 60
ESB702030S 1.5 3 6 4 10 50
ESB702030S4 1.5 3 4 4 - 45
ESB702031 1.5 3 6 4 10 70
ESB702040 2 4 6 5 10 60
ESB702040S 2 4 6 5 10 50
ESB702040S4 2 4 4 5 - 45
ESB702041 2 4 6 5 10 70
ESB702050 2.5 5 6 6 12 60
ESB702060 3 6 6 7 12 60
ESB702061 3 6 6 7 12 90
ESB702080 4 8 8 9 15 70
ESB702081 4 8 8 9 15 100
ESB702100 5 10 10 11 25 75
ESB702101 5 10 10 11 25 100
ESB702120 6 12 12 12 25 80
ESB702121 6 12 12 12 25 110
٘ The above specifications are subject to change without prior notice for product quality improvement.
t Applicable Workpiece
Carbon steel Alloy steel Pre-hardened steel Hardened steel Cast iron
Copper Graphite Aluminum Stainless steel
~ HB225 HB225~325 HRC30~50 SKD61~HRC55 SKD11 HRC55~63 ~FCD500
○ ◎ ◎ ○
◎: Excellent
◎ ○: Good
KORLOY
Y 41
Endmill
H-Star Endmill
ESB
SB712 t50-&3"/$&
2 Flutes ball endmill
ØD Ød
ULTRA 30 R R AlTiN
DATA
~ Ø6 0 ~ -0.012mm
FINE ±0.005 ±0.008 h5
HELIX Ø8 ~ Ø12 0 ~ -0.015mm
(mm)
Designation R ØD Ød ℓ L
ESB712010 0.5 1 6 2.5 50

ESB712010S 0.5 1 6 1.5 40
ESB712010S4 0.5 1 4 2.5 50
ESB712012 0.6 1.2 6 3 50
ESB712015 0.75 1.5 6 4 50
ESB712015S 0.75 1.5 6 2.5 40
ESB712015S4 0.75 1.5 4 4 50
ESB712020 1 2 6 5 50
ESB712020S 1 2 6 3 40
ESB712020S4 1 2 4 5 50
ESB712025 1.25 2.5 6 7 60
ESB712030 1.5 3 6 8 60
ESB712030S 1.5 3 6 4.5 50
ESB712030S4 1.5 3 4 8 60
ESB712040 2 4 6 8 70
ESB712040S 2 4 6 6 50
ESB712050 2.5 5 6 10 80
ESB712050S 2.5 5 6 7.5 50
ESB712060 3 6 6 12 90
ESB712060S 3 6 6 9 50
ESB712080S 4 8 8 12 50
ESB712081 4 8 8 14 100
ESB712100 5 10 10 18 100
ESB712100S 5 10 10 15 60
ESB712120 6 12 12 22 110
ESB712120S 6 12 12 18 60
○ ◎ ◎ ○
42 KORLOY
ESB7
SB703 3 Flutes neck type ball endmill
t50-&3"/$&
ØD Ød
ULTRA 30 R R AlTiN
DATA
~ Ø6 0 ~ -0.012mm
FINE ±0.005 ±0.008 h5
HELIX Ø8 ~ Ø12 0 ~ -0.015mm
13°
1
R 2
(mm)
ESB703020 1 2 6 2.5 5 50
ESB703025 1.25 2.5 6 3 7 50
ESB703030 1.5 3 6 4 10 60
ESB703030S 1.5 3 6 4 10 50
ESB703031 1.5 3 6 4 10 70
ESB703040 2 4 6 5 10 60
ESB703040S 2 4 6 5 10 50
ESB703041 2 4 6 5 10 70
ESB703050 2.5 5 6 6 12 60
ESB703060 3 6 6 7 12 60
ESB703061 3 6 6 7 12 90
ESB703080 4 8 8 9 15 70
ESB703081 4 8 8 9 15 100
ESB703100 5 10 10 11 25 75
ESB703101 5 10 10 11 25 100
ESB703120 6 12 12 12 25 80
ESB703121 6 12 12 12 25 110
○ ◎ ◎ ○
◎: Excellent
◎ ○: Good
KORLOY
Y 43
Endmill
H-Star Endmill
ESB
SB734 4 Flutes 15° helix ball endmill
t50-&3"/$&
ØD Ød
ULTRA 15 R R AlTiN
DATA
FINE HELIX ±0.005 ±0.008 All sizes 0 ~ -0.012mm h5
1
R 2
(mm)
Designation R ØD Ød ℓ1 ℓ2 ѡ L
ESB734020-2.5 1 2 4 2 25 2.5 60
ESB734020-3.5 1 2 4 2 18 3.5 60
ESB734025-2.5 1.25 2.5 4 3 20 2.5 60
ESB734025-3.0 1.25 2.5 4 3 17 3 60
ESB734030-2.0 1.5 3 6 3 46 2 70
ESB734030-2.5 1.5 3 6 3 37 2.5 70
ESB734040-2.0 2 4 6 4 33 2 70
ESB734040-2.5 2 4 6 4 27 2.5 70
ESB734050-2.5 2.5 5 6 5 16 2.5 70
ESB734060-1.5 3 6 8 6 44 1.5 100
ESB734060-2.5 3 6 8 6 29 2.5 100
ESB734080-1.5 4 8 10 8 46 1.5 100
ESB734080-2.5 4 8 10 8 31 2.5 100
ESB734100-1.5 5 10 12 10 48 1.5 110
ESB734100-2.5 5 10 12 10 33 2.5 110
○ ◎ ◎ ○
44 KORLOY
ESE
SE702 2 Flutes neck type flat endmill
t50-&3"/$&
DATA ØD Ød
ULTRA 30 ~ Ø6
FINE
AlTiN 0 ~ -0.012mm
h5
HELIX Ø8 ~ Ø20 0 ~ -0.015mm
p.414, 415
13°
1
2
(mm)
Designation ØD Ød ℓ1 ℓ2 L
ESE702001 0.1 4 0.2 - 40

ESE702002 0.2 4 0.4 - 40
ESE702003 0.3 4 0.5 - 40
ESE702004 0.4 4 0.7 - 40
ESE702005 0.5 4 1 - 40
ESE702006 0.6 4 1.2 - 40
ESE702007 0.7 4 1.4 - 40
ESE702008 0.8 4 1.6 - 40
ESE702009 0.9 4 2 - 40
ESE702010 1 6 1.5 - 40
ESE702010S4 1 4 1.5 - 40
ESE702015 1.5 6 2.2 - 40
ESE702020 2 6 3 6 40
ESE702020S4 2 4 3 6 40
ESE702025 2.5 6 4 6 40
ESE702030 3 6 4 7 45
ESE702035 3.5 6 6 9 45
ESE702040 4 6 6 9 45
ESE702045 4.5 6 6 10 45
ESE702050 5 6 6 11 50
ESE702060 6 6 7 14 50
ESE702080 8 8 9 18 60
ESE702100 10 10 12 25 75
ESE702120 12 12 15 30 75
ESE702160 16 16 18 38 90
ESE702200 20 20 24 45 100
○ ◎ ◎ ○
◎: Excellent
◎ ○: Good
KORLOY
Y 45
Endmill
H-Star Endmill
ESE
SE712 t50-&3"/$&
2 Flutes flat endmill
DATA ØD Ød
ULTRA 35 ~ Ø6
FINE
AlTiN 0 ~ -0.012mm
h5
HELIX Ø8 ~ Ø12 0 ~ -0.015mm
p.416
(mm)
Designation ØD Ød ℓ L Designation ØD Ød ℓ L
ESE712010 1 6 3 40 ESE712030-12 3 6 12 50
ESE712010-02 1 6 2 40 ESE712035 3.5 6 10 45
ESE712010-02S4 1 4 2 40 ESE712040 4 6 10 45
ESE712010-04 1 6 4 40 ESE712040S4 4 4 10 45
ESE712012 1.2 6 3 40 ESE712040-12 4 6 12 50
ESE712015 1.5 6 4 40 ESE712040-16 4 6 16 60
ESE712015S4 1.5 4 4 40 ESE712045 4.5 6 11 45
ESE712015-06 1.5 6 6 40 ESE712050 5 6 13 50
ESE712015-08 1.5 6 8 40 ESE712055 5.5 6 13 50
ESE712020 2 6 5 40 ESE712060 6 6 13 50
ESE712020S4 2 4 5 40 ESE712060-15 6 6 15 60
ESE712020-08 2 6 8 40 ESE712065 6.5 8 16 60
ESE712020-10 2 6 10 50 ESE712070 7 8 18 60
ESE712025 2.5 6 6 40 ESE712080 8 8 19 60
ESE712025S4 2.5 4 6 40 ESE712100 10 10 22 70
ESE712030 3 6 8 45 ESE712100-25 10 10 25 70
ESE712030S4 3 4 8 45 ESE712120 12 12 26 75
ESE712030-10 3 6 10 50 ESE712120-30 12 12 30 75
○ ◎ ◎ ○
46 KORLOY
ESE
SE704 4 Flutes neck type flat endmill
t50-&3"/$&
DATA ØD Ød
ULTRA 30 ~ Ø6
FINE
AlTiN 0 ~ -0.012mm
h5
HELIX Ø8 ~ Ø20 0 ~ -0.015mm
p.415
13°
1
2
(mm)
ESE704010 1 6 1.5 - 40
ESE704010S4 1 4 1.5 - 40
ESE704015 1.5 6 2.2 - 40
ESE704015S4 1.5 4 2.2 - 40
ESE704020 2 6 3 6 40
ESE704020S4 2 4 3 6 40
ESE704025 2.5 6 4 6 40
ESE704025S4 2.5 4 4 6 40
ESE704030 3 6 4 7 45
ESE704030S4 3 4 4 7 45
ESE704035 3.5 6 5 9 45
ESE704040 4 6 5 9 45
ESE704040S4 4 4 5 9 45
ESE704045 4.5 6 6 10 45
ESE704050 5 6 6 11 50
ESE704060 6 6 7 14 50
ESE704080 8 8 9 18 60
ESE704100 10 10 12 25 75
ESE704120 12 12 15 30 75
ESE704160 16 16 18 38 90
ESE704200 20 20 24 45 100
○ ◎ ◎ ○
◎: Excellent
◎ ○: Good
KORLOY
Y 47
Endmill
H-Star Endmill
ESE
SE714 4 Flutes high helix flat endmill
t50-&3"/$&
DATA ØD Ød
ULTRA 45 ~ Ø6
FINE
AlTiN 0 ~ -0.012mm
h5
HELIX Ø8 ~ Ø12 0 ~ -0.015mm
p.415
(mm)
ESE714010 1 6 2.5 40
ESE714010S4 1 4 2.5 40
ESE714012 1.2 6 3 40
ESE714015 1.5 6 4 40
ESE714015S4 1.5 4 4 40
ESE714020 2 6 5 40
ESE714020S4 2 4 5 40
ESE714025 2.5 6 6 40
ESE714025S4 2.5 4 6 40
ESE714030 3 6 8 45
ESE714030S4 3 4 8 45
ESE714035 3.5 6 9 45
ESE714040 4 6 10 45
ESE714040S4 4 4 10 45
ESE714050 5 6 13 50
ESE714060 6 6 13 50
ESE714060-15 6 6 15 60
ESE714060-15L 6 6 15 90
ESE714080 8 8 19 60
ESE714080L 8 8 19 100
ESE714100 10 10 22 70
ESE714100-25 10 10 25 70
ESE714100-25L 10 10 25 100
ESE714120 12 12 26 75
ESE714120-30 12 12 30 80
ESE714120-30L 12 12 30 100
○ ◎ ◎ ○
48 KORLOY
SE724(6)
ESE 4&6 Flutes neck type flat endmill
t50-&3"/$&
DATA ØD Ød
ULTRA 45 60 ~ Ø6
FINE
AlTiN 0 ~ -0.012mm
h5
HELIX HELIX Ø8 ~ Ø12 0 ~ -0.015mm
Z=6 p.417
13°
(mm)
ØD Ød ℓ1 ℓ2 L Z
ESE724010 1 6 1.5 5 45 4
ESE724015 1.5 6 2.2 6 45 4
ESE724020 2 6 3 8 45 4
ESE724030 3 6 4 9 50 4
ESE724040 4 6 5 12 50 4
ESE724040S4L 4 4 5 12 75 4
ESE724050 5 6 6 15 50 4
ESE726060 6 6 7 20 60 6
ESE726080 8 8 9 25 70 6
ESE726100 10 10 12 32 75 6
ESE726120 12 12 15 38 80 6
○ ◎ ◎ ○
◎: Excellent
◎ ○: Good
KORLOY
Y 49
Endmill
H-Star Endmill
ESE
t50-&3"/$&
DATA ØD Ød
ULTRA 35 ~ Ø6
FINE
AlTiN 0 ~ -0.012mm
h5
HELIX Ø8 ~ Ø12 0 ~ -0.015mm
p.415
(mm)
ESE744010S3 1 3 2.5 40
ESE744010S4 1 4 2.5 40
ESE744010 1 6 2.5 40
ESE744012S3 1.2 3 3 40
ESE744012S4 1.2 4 3 40
ESE744015S3 1.5 3 4 40
ESE744015S4 1.5 4 4 40
ESE744015 1.5 6 4 40
ESE744020S3 2 3 6 40
ESE744020S4 2 4 6 40
ESE744020 2 6 6 40
ESE744025S3 2.5 3 8 45
ESE744025S4 2.5 4 8 45
ESE744025 2.5 6 8 45
ESE744030S3 3 3 8 50
ESE744030S4 3 4 8 45
ESE744030 3 6 8 45
ESE744035 3.5 6 10 45
ESE744040S4 4 4 11 45
ESE744040 4 6 11 45
ESE744045 4.5 6 11 45
ESE744050 5 6 13 50
ESE744055 5.5 6 13 50
ESE744060 6 6 13 50
ESE744080 8 8 19 60
ESE744100 10 10 22 70
ESE744120 12 12 26 75
○ ◎ ◎ ○
50 KORLOY
ESE
t50-&3"/$&
DATA ØD Ød
ULTRA 50 ~ Ø6
FINE
AlTiN 0 ~ -0.012mm
h5
HELIX Ø8 ~ Ø20 0 ~ -0.015mm
p.417
(mm)
ESE716060 6 6 13 50
ESE716080 8 8 18 60
ESE716100 10 10 22 70
ESE716120 12 12 26 75
ESE716160 16 16 35 90
ESE716200 20 20 44 100
○ ◎ ◎ ○
KORLOY
Y 51
Endmill
H-Star Endmill
ESR
SR702 2 Flutes neck type radius endmill
t50-&3"/$&
DATA ØD Ød
ULTRA 30 R R ~ Ø6
FINE
AlTiN 0 ~ -0.012mm
h5
HELIX ±0.01 ±0.015 Ø8 ~ Ø12 0 ~ -0.015mm
6 or Under Above Ø6 p.418, 419
13°
2
R
(mm)
Designation R ØD Ød ℓ1 ℓ2 L Designation R ØD Ød ℓ1 ℓ2 L
ESR70201000503S4 0.05 1 4 1.5 3 50 ESR7020150110S4 0.1 1.5 4 2.5 10 50

ESR70201000504S4 0.05 1 4 1.5 4 50 ESR7020150112S4 0.1 1.5 4 2.5 12 50
ESR70201000506S4 0.05 1 4 1.5 6 50 ESR7020150204 0.2 1.5 6 2.5 4 50
ESR70201000508S4 0.05 1 4 1.5 8 50 ESR7020150204S4 0.2 1.5 4 2.5 4 50
ESR70201000510S4 0.05 1 4 1.5 10 50 ESR7020150206 0.2 1.5 6 2.5 6 50
ESR7020100103S4 0.1 1 4 1.5 3 50 ESR7020150206S4 0.2 1.5 4 2.5 6 50
ESR7020100104 0.1 1 6 1.5 4 50 ESR7020150208 0.2 1.5 6 2.5 8 50
ESR7020100104S4 0.1 1 4 1.5 4 50 ESR7020150208S4 0.2 1.5 4 2.5 8 50
ESR7020100106 0.1 1 6 1.5 6 50 ESR7020150210 0.2 1.5 6 2.5 10 50
ESR7020100106S4 0.1 1 4 1.5 6 50 ESR7020150210S4 0.2 1.5 4 2.5 10 50
ESR7020100108S4 0.1 1 4 1.5 8 50 ESR7020150212S4 0.2 1.5 4 2.5 12 50
ESR7020100110S4 0.1 1 4 1.5 10 50 ESR7020150215 0.2 1.5 6 2.5 15 50
ESR7020100203S4 0.2 1 4 1.5 3 50 ESR7020150304S4 0.3 1.5 4 2.5 4 50
ESR7020100204 0.2 1 6 1.5 4 50 ESR7020150306S4 0.3 1.5 4 2.5 6 50
ESR7020100204S4 0.2 1 4 1.5 4 50 ESR7020150308S4 0.3 1.5 4 2.5 8 50
ESR7020100206 0.2 1 6 1.5 6 50 ESR7020150310S4 0.3 1.5 4 2.5 10 50
ESR7020100206S4 0.2 1 4 1.5 6 50 ESR7020150312S4 0.3 1.5 4 2.5 12 50
ESR7020100208S4 0.2 1 4 1.5 8 50 ESR7020150504S4 0.5 1.5 4 2.5 4 50
ESR7020100210 0.2 1 6 1.5 10 50 ESR7020150506S4 0.5 1.5 4 2.5 6 50
ESR7020100210S4 0.2 1 4 1.5 10 50 ESR7020150508S4 0.5 1.5 4 2.5 8 50
ESR7020100212 0.2 1 6 1.5 12 50 ESR7020150510S4 0.5 1.5 4 2.5 10 50
ESR7020100303S4 0.3 1 4 1.5 3 50 ESR7020150512S4 0.5 1.5 4 2.5 12 50
ESR7020100304S4 0.3 1 4 1.5 4 50 ESR7020200106S4 0.1 2 4 3 6 50
ESR7020100306S4 0.3 1 4 1.5 6 50 ESR7020200108 0.1 2 6 3 8 50
ESR7020100308S4 0.3 1 4 1.5 8 50 ESR7020200108S4 0.1 2 4 3 8 50
ESR7020100310S4 0.3 1 4 1.5 10 50 ESR7020200110S4 0.1 2 4 3 10 50
ESR7020120208 0.2 1.2 6 2 8 50 ESR7020200112 0.1 2 6 3 12 50
ESR7020120212 0.2 1.2 6 2 12 50 ESR7020200112S4 0.1 2 4 3 12 50
ESR70201500504S4 0.05 1.5 4 2.5 4 50 ESR7020200116S4 0.1 2 4 3 16 50
ESR70201500506S4 0.05 1.5 4 2.5 6 50 ESR7020200120S4 0.1 2 4 3 20 50
ESR70201500508S4 0.05 1.5 4 2.5 8 50 ESR7020200206 0.2 2 6 3 6 50
ESR70201500510S4 0.05 1.5 4 2.5 10 50 ESR7020200206S4 0.2 2 4 3 6 50
ESR70201500512S4 0.05 1.5 4 2.5 12 50 ESR7020200208S4 0.2 2 4 3 8 50
ESR7020150104S4 0.1 1.5 4 2.5 4 50 ESR7020200209 0.2 2 6 3 9 50
ESR7020150106S4 0.1 1.5 4 2.5 6 50 ESR7020200210S4 0.2 2 4 3 10 50
ESR7020150108S4 0.1 1.5 4 2.5 8 50 ESR7020200212S4 0.2 2 4 3 12 50
52 KORLOY
ESR
t50-&3"/$&
DATA ØD Ød
ULTRA 30 R R ~ Ø6
FINE
AlTiN 0 ~ -0.012mm
h5
HELIX ±0.01 ±0.015 Ø8 ~ Ø12 0 ~ -0.015mm
13°
2
R
ESR7020200216 0.2 2 6 3 16 50 ESR7020300120 0.1 3 6 4.5 20 60

ESR7020200216S4 0.2 2 4 3 16 50 ESR7020300208 0.2 3 6 4.5 8 55
ESR7020200220S4 0.2 2 4 3 20 50 ESR7020300209 0.2 3 6 4.5 9 55
ESR7020200306 0.3 2 6 3 6 50 ESR7020300210 0.2 3 6 4.5 10 55
ESR7020200306S4 0.3 2 4 3 6 50 ESR7020300212 0.2 3 6 4.5 12 55
ESR7020200308S4 0.3 2 4 3 8 50 ESR7020300216 0.2 3 6 4.5 16 55
ESR7020200310S4 0.3 2 4 3 10 50 ESR7020300220 0.2 3 6 4.5 20 60
ESR7020200312S4 0.3 2 4 3 12 50 ESR7020300308 0.3 3 6 4.5 8 55
ESR7020200316S4 0.3 2 4 3 16 50 ESR7020300309 0.3 3 6 4.5 9 55
ESR7020200320S4 0.3 2 4 3 20 50 ESR7020300310 0.3 3 6 4.5 10 55
ESR7020200506 0.5 2 6 3 6 50 ESR7020300312 0.3 3 6 4.5 12 55
ESR7020200506S4 0.5 2 4 3 6 50 ESR7020300314 0.3 3 6 4.5 14 55
ESR7020200508S4 0.5 2 4 3 8 50 ESR7020300316 0.3 3 6 4.5 16 55
ESR7020200509 0.5 2 6 3 9 50 ESR7020300320 0.3 3 6 4.5 20 60
ESR7020200510S4 0.5 2 4 3 10 50 ESR7020300508 0.5 3 6 4.5 8 55
ESR7020200512 0.5 2 6 3 12 50 ESR7020300509 0.5 3 6 4.5 9 55
ESR7020200512S4 0.5 2 4 3 12 50 ESR7020300510 0.5 3 6 4.5 10 55
ESR7020200516 0.5 2 6 3 16 50 ESR7020300512 0.5 3 6 4.5 12 55
ESR7020200516S4 0.5 2 4 3 16 50 ESR7020300516 0.5 3 6 4.5 16 55
ESR7020200520S4 0.5 2 4 3 20 50 ESR7020300520 0.5 3 6 4.5 20 60
ESR7020250208S4 0.2 2.5 4 3.5 8 50 ESR7020301008 1 3 6 4.5 8 55
ESR7020250210S4 0.2 2.5 4 3.5 10 50 ESR7020301010 1 3 6 4.5 10 55
ESR7020250212S4 0.2 2.5 4 3.5 12 50 ESR7020301012 1 3 6 4.5 12 55
ESR7020250216S4 0.2 2.5 4 3.5 16 50 ESR7020301016 1 3 6 4.5 16 55
ESR7020250308S4 0.3 2.5 4 3.5 8 50 ESR7020301020 1 3 6 4.5 20 60
ESR7020250310S4 0.3 2.5 4 3.5 10 50 ESR7020301025 1 3 6 4.5 25 60
ESR7020250312S4 0.3 2.5 4 3.5 12 50 ESR7020400110 0.1 4 6 6 10 55
ESR7020250316S4 0.3 2.5 4 3.5 16 50 ESR7020400112 0.1 4 6 6 12 55
ESR7020250508S4 0.5 2.5 4 3.5 8 50 ESR7020400116 0.1 4 6 6 16 55
ESR7020250510S4 0.5 2.5 4 3.5 10 50 ESR7020400120 0.1 4 6 6 20 60
ESR7020250512S4 0.5 2.5 4 3.5 12 50 ESR7020400125 0.1 4 6 6 25 60
ESR7020250516S4 0.5 2.5 4 3.5 16 50 ESR7020400210 0.2 4 6 6 10 55
ESR7020300108 0.1 3 6 4.5 8 55 ESR7020400212 0.2 4 6 6 12 55
ESR7020300110 0.1 3 6 4.5 10 55 ESR7020400216 0.2 4 6 6 16 55
ESR7020300112 0.1 3 6 4.5 12 55 ESR7020400220 0.2 4 6 6 20 60
ESR7020300116 0.1 3 6 4.5 16 55 ESR7020400225 0.2 4 6 6 25 60
KORLOY
Y 53
Endmill
H-Star Endmill
ESR
t50-&3"/$&
DATA ØD Ød
ULTRA 30 R R ~ Ø6
FINE
AlTiN 0 ~ -0.012mm
h5
HELIX ±0.01 ±0.015 Ø8 ~ Ø12 0 ~ -0.015mm
13°
2
R
(mm)
ESR7020400310 0.3 4 6 6 10 55 ESR7020600520 0.5 6 6 9 20 60

ESR7020400312 0.3 4 6 6 12 55 ESR7020601020 1 6 6 9 20 60
ESR7020400316 0.3 4 6 6 16 55 ESR7020601520 1.5 6 6 9 20 60
ESR7020400320 0.3 4 6 6 20 60 ESR7020602020 2 6 6 9 20 60
ESR7020400325 0.3 4 6 6 25 60 ESR7020800225 0.2 8 8 12 25 60
ESR7020400510 0.5 4 6 6 10 55 ESR7020800325 0.3 8 8 12 25 60
ESR7020400512 0.5 4 6 6 12 55 ESR7020800525 0.5 8 8 12 25 60
ESR7020400516 0.5 4 6 6 16 55 ESR7020801025 1 8 8 12 25 60
ESR7020400520 0.5 4 6 6 20 60 ESR7020801525 1.5 8 8 12 25 60
ESR7020400525 0.5 4 6 6 25 60 ESR7021000232 0.2 10 10 15 32 70
ESR7020400530 0.5 4 6 6 30 70 ESR7021000332 0.3 10 10 15 32 70
ESR7020401010 1 4 6 6 10 55 ESR7021000532 0.5 10 10 15 32 70
ESR7020401012 1 4 6 6 12 55 ESR7021001032 1 10 10 15 32 70
ESR7020401016 1 4 6 6 16 55 ESR7021001532 1.5 10 10 15 32 70
ESR7020401020 1 4 6 6 20 60 ESR7021002032 2 10 10 15 32 70
ESR7020401025 1 4 6 6 25 60 ESR7021200338 0.3 12 12 18 38 80
ESR7020401030 1 4 6 6 30 70 ESR7021200538 0.5 12 12 18 38 80
ESR7020500318 0.3 5 6 8 18 60 ESR7021201038 1 12 12 18 38 80
ESR7020600220 0.2 6 6 9 20 60 ESR7021201538 1.5 12 12 18 38 80
ESR7020600320 0.3 6 6 9 20 60 ESR7021202038 2 12 12 18 38 80
○ ◎ ◎ ○
54 KORLOY
ESR
SR732 2 Flutes long shank radius endmill
t50-&3"/$&
DATA ØD Ød
ULTRA 30 R R ~ Ø6
FINE
AlTiN 0 ~ -0.012mm
h5
HELIX ±0.01 ±0.015 Ø8 ~ Ø12 0 ~ -0.015mm
Ø6 or Under Above Ø6 p.419
Designation R ØD Ød ℓ L Designation R ØD Ød ℓ L
ESR73201001 0.1 1 6 2 50 ESR73205002 0.2 5 6 13 80

ESR73201002 0.2 1 6 2 50 ESR73205003 0.3 5 6 13 80
ESR73201003 0.3 1 6 2 50 ESR73205005 0.5 5 6 13 80
ESR73201501 0.1 1.5 6 3 50 ESR73205010 1 5 6 13 80
ESR73201502 0.2 1.5 6 3 50 ESR73206001 0.1 6 6 15 90
ESR73201503 0.3 1.5 6 3 50 ESR73206002 0.2 6 6 15 90
ESR73201505 0.5 1.5 6 3 50 ESR73206003 0.3 6 6 15 90
ESR73202001 0.1 2 6 5 50 ESR73206005 0.5 6 6 15 90
ESR73202002 0.2 2 6 5 50 ESR73206010 1 6 6 15 90
ESR73202003 0.3 2 6 5 50 ESR73208001 0.1 8 8 20 100
ESR73202005 0.5 2 6 5 50 ESR73208002 0.2 8 8 20 100
ESR73202501 0.1 2.5 6 7 60 ESR73208003 0.3 8 8 20 100
ESR73202502 0.2 2.5 6 7 60 ESR73208005 0.5 8 8 20 100
ESR73202503 0.3 2.5 6 7 60 ESR73208010 1 8 8 20 100
ESR73202505 0.5 2.5 6 7 60 ESR73208020 2 8 8 20 100
ESR73203001 0.1 3 6 8 60 ESR73210002 0.2 10 10 25 100
ESR73203002 0.2 3 6 8 60 ESR73210003 0.3 10 10 25 100
ESR73203003 0.3 3 6 8 60 ESR73210005 0.5 10 10 25 100
ESR73203005 0.5 3 6 8 60 ESR73210010 1 10 10 25 100
ESR73204001 0.1 4 6 10 70 ESR73210020 2 10 10 25 100
ESR73204002 0.2 4 6 10 70 ESR73212002 0.2 12 12 30 110
ESR73204003 0.3 4 6 10 70 ESR73212003 0.3 12 12 30 110
ESR73204005 0.5 4 6 10 70 ESR73212005 0.5 12 12 30 110
ESR73204010 1 4 6 10 70 ESR73212010 1 12 12 30 110
ESR73205001 0.1 5 6 13 80 ESR73212020 2 12 12 30 110
○ ◎ ◎ ○
KORLOY
Y 55
Endmill
H-Star Endmill
ESR
t50-&3"/$&
DATA ØD Ød
ULTRA 30 R R ~ Ø6
FINE
AlTiN 0 ~ -0.012mm
h5
HELIX ±0.01 ±0.015 Ø8 ~ Ø12 0 ~ -0.015mm
6 or Under Above Ø6 p.419
13°
2
R
(mm)
ESR7040100103S4 0.1 1 4 2 3 50 ESR7040300220 0.2 3 6 4 20 60

ESR7040100104S4 0.1 1 4 2 4 50 ESR7040300308 0.3 3 6 4 8 55
ESR7040100106S4 0.1 1 4 2 6 50 ESR7040300309 0.3 3 6 4 9 55
ESR7040100203S4 0.2 1 4 2 3 50 ESR7040300310 0.3 3 6 4 10 55
ESR7040100204S4 0.2 1 4 2 4 50 ESR7040300312 0.3 3 6 4 12 55
ESR7040100206S4 0.2 1 4 2 6 50 ESR7040300316 0.3 3 6 4 16 55
ESR7040100303S4 0.3 1 4 2 3 50 ESR7040300320 0.3 3 6 4 20 60
ESR7040100304S4 0.3 1 4 2 4 50 ESR7040300508 0.5 3 6 4 8 55
ESR7040100306S4 0.3 1 4 2 6 50 ESR7040300509 0.5 3 6 4 9 55
ESR7040150104S4 0.1 1.5 4 2.5 4 50 ESR7040300510 0.5 3 6 4 10 55
ESR7040150106S4 0.1 1.5 4 2.5 6 50 ESR7040300512 0.5 3 6 4 12 55
ESR7040150204S4 0.2 1.5 4 2.5 4 50 ESR7040300516 0.5 3 6 4 16 55
ESR7040150206S4 0.2 1.5 4 2.5 6 50 ESR7040300520 0.5 3 6 4 20 60
ESR7040150304S4 0.3 1.5 4 2.5 4 50 ESR7040301008 1 3 6 4 8 55
ESR7040150306S4 0.3 1.5 4 2.5 6 50 ESR7040301010 1 3 6 4 10 55
ESR7040200106S4 0.1 2 4 3 6 50 ESR7040301012 1 3 6 4 12 55
ESR7040200108S4 0.1 2 4 3 8 50 ESR7040301016 1 3 6 4 16 55
ESR7040200206S4 0.2 2 4 3 6 50 ESR7040301020 1 3 6 4 20 60
ESR7040200208 0.2 2 6 3 8 50 ESR7040400110 0.1 4 6 6 10 55
ESR7040200208S4 0.2 2 4 3 8 50 ESR7040400112 0.1 4 6 6 12 55
ESR7040200210 0.2 2 6 3 10 50 ESR7040400116 0.1 4 6 6 16 55
ESR7040200212 0.2 2 6 3 12 50 ESR7040400120 0.1 4 6 6 20 60
ESR7040200306S4 0.3 2 4 3 6 50 ESR7040400125 0.1 4 6 6 25 60
ESR7040200308S4 0.3 2 4 3 8 50 ESR7040400210 0.2 4 6 6 10 55
ESR7040200506S4 0.5 2 4 3 6 50 ESR7040400212 0.2 4 6 6 12 55
ESR7040200508S4 0.5 2 4 3 8 50 ESR7040400216 0.2 4 6 6 16 55
ESR7040250106S4 0.1 2.5 4 3.5 6 50 ESR7040400220 0.2 4 6 6 20 60
ESR7040300108 0.1 3 6 4 8 55 ESR7040400225 0.2 4 6 6 25 60
ESR7040300110 0.1 3 6 4 10 55 ESR7040400310 0.3 4 6 6 10 55
ESR7040300112 0.1 3 6 4 12 55 ESR7040400312 0.3 4 6 6 12 55
ESR7040300116 0.1 3 6 4 16 55 ESR7040400316 0.3 4 6 6 16 55
ESR7040300120 0.1 3 6 4 20 60 ESR7040400320 0.3 4 6 6 20 60
ESR7040300208 0.2 3 6 4 8 55 ESR7040400325 0.3 4 6 6 25 60
ESR7040300210 0.2 3 6 4 10 55 ESR7040400510 0.5 4 6 6 10 55
ESR7040300212 0.2 3 6 4 12 55 ESR7040400512 0.5 4 6 6 12 55
ESR7040300216 0.2 3 6 4 16 55 ESR7040400516 0.5 4 6 6 16 55
56 KORLOY
ESR
t50-&3"/$&
DATA ØD Ød
ULTRA 30 R R ~ Ø6
FINE
AlTiN 0 ~ -0.012mm
h5
HELIX ±0.01 ±0.015 Ø8 ~ Ø12 0 ~ -0.015mm
13°
2
R
(mm)
ESR7040400520 0.5 4 6 6 20 60 ESR7040800525 0.5 8 8 12 25 60

ESR7040400525 0.5 4 6 6 25 60 ESR7040801025 1 8 8 12 25 60
ESR7040401010 1 4 6 6 10 55 ESR7040801525 1.5 8 8 12 25 60
ESR7040401012 1 4 6 6 12 55 ESR7040802025 2 8 8 12 25 60
ESR7040401016 1 4 6 6 16 55 ESR7041000232 0.2 10 10 15 32 70
ESR7040401020 1 4 6 6 20 60 ESR7041000332 0.3 10 10 15 32 70
ESR7040401025 1 4 6 6 25 60 ESR7041000532 0.5 10 10 15 32 70
ESR7040600220 0.2 6 6 9 20 60 ESR7041001032 1 10 10 15 32 70
ESR7040600320 0.3 6 6 9 20 60 ESR7041001532 1.5 10 10 15 32 70
ESR7040600520 0.5 6 6 9 20 60 ESR7041002032 2 10 10 15 32 70
ESR7040601020 1 6 6 9 20 60 ESR7041200338 0.3 12 12 18 38 80
ESR7040601520 1.5 6 6 9 20 60 ESR7041200538 0.5 12 12 18 38 80
ESR7040602020 2 6 6 9 20 60 ESR7041201038 1 12 12 18 38 80
ESR7040800225 0.2 8 8 12 25 60 ESR7041201538 1.5 12 12 18 38 80
ESR7040800325 0.3 8 8 12 25 60 ESR7041202038 2 12 12 18 38 80
○ ◎ ◎ ○
KORLOY
Y 57
Endmill
H-Star Endmill
ESR
SR714 4 Flutes radius endmill
t50-&3"/$&
DATA ØD Ød
ULTRA 45 R R ~ Ø6
FINE
AlTiN 0 ~ -0.012mm
h5
HELIX ±0.01 ±0.015 Ø8 ~ Ø12 0 ~ -0.015mm
(mm)
ESR7140303 0.3 3 6 8 50
ESR7140305S4 0.5 3 4 8 50
ESR7140305 0.5 3 6 8 50
ESR7140403 0.3 4 6 11 50
ESR7140405 0.5 4 6 11 50
ESR7140405S4 0.5 4 4 11 50
ESR7140410 1 4 6 11 50
ESR7140603 0.3 6 6 15 60
ESR7140605 0.5 6 6 15 60
ESR7140610 1 6 6 15 60
ESR7140803 0.3 8 8 20 60
ESR7140805 0.5 8 8 20 60
ESR7140810 1 8 8 20 60
ESR7140815 1.5 8 8 20 60
ESR7140820 2 8 8 20 60
ESR7141003 0.3 10 10 25 70
ESR7141005 0.5 10 10 25 70
ESR7141010 1 10 10 25 70
ESR7141015 1.5 10 10 25 70
ESR7141020 2 10 10 25 70
ESR7141025 2.5 10 10 25 70
ESR7141030 3 10 10 25 70
ESR7141203 0.3 12 12 30 80
ESR7141205 0.5 12 12 30 80
ESR7141210 1 12 12 30 80
ESR7141215 1.5 12 12 30 80
ESR7141220 2 12 12 30 80
ESR7141225 2.5 12 12 30 80
ESR7141230 3 12 12 30 80
○ ◎ ◎ ○
58 KORLOY
ESR
t50-&3"/$&
DATA ØD Ød
ULTRA 30 R R ~ Ø6
FINE
AlTiN 0 ~ -0.012mm
h5
HELIX ±0.01 ±0.015 Ø8 ~ Ø12 0 ~ -0.015mm
13°
R 2
(mm)
ESR7240600520 0.5 6 6 9 20 90
ESR7240601020 1 6 6 9 20 90
ESR7240800525 0.5 8 8 12 25 100
ESR7240801025 1 8 8 12 25 100
ESR7241000532 0.5 10 10 15 32 100
ESR7241001032 1 10 10 15 32 100
ESR7241002032 2 10 10 15 32 100
ESR7241200538 0.5 12 12 18 38 110
ESR7241201038 1 12 12 18 38 110
ESR7241202038 2 12 12 18 38 110
○ ◎ ◎ ○
KORLOY
Y 59
Endmill
H-Star Endmill
ESR
SR734 4 Flutes long shank radius endmill
t50-&3"/$&
DATA ØD Ød
ULTRA 30 R R ~ Ø6
FINE
AlTiN 0 ~ -0.012mm
h5
HELIX ±0.01 ±0.015 Ø8 ~ Ø12 0 ~ -0.015mm
(mm)
ESR73401001 0.1 1 6 2 50 ESR73405002 0.2 5 6 13 80

ESR73401002 0.2 1 6 2 50 ESR73405003 0.3 5 6 13 80
ESR73401003 0.3 1 6 2 50 ESR73405005 0.5 5 6 13 80
ESR73401501 0.1 1.5 6 3 50 ESR73405010 1 5 6 13 80
ESR73401502 0.2 1.5 6 3 50 ESR73406001 0.1 6 6 15 90
ESR73401503 0.3 1.5 6 3 50 ESR73406002 0.2 6 6 15 90
ESR73401505 0.5 1.5 6 3 50 ESR73406003 0.3 6 6 15 90
ESR73402001 0.1 2 6 5 50 ESR73406005 0.5 6 6 15 90
ESR73402002 0.2 2 6 5 50 ESR73406010 1 6 6 15 90
ESR73402003 0.3 2 6 5 50 ESR73408001 0.1 8 8 20 100
ESR73402005 0.5 2 6 5 50 ESR73408002 0.2 8 8 20 100
ESR73402501 0.1 2.5 6 7 60 ESR73408003 0.3 8 8 20 100
ESR73402502 0.2 2.5 6 7 60 ESR73408005 0.5 8 8 20 100
ESR73402503 0.3 2.5 6 7 60 ESR73408010 1 8 8 20 100
ESR73402505 0.5 2.5 6 7 60 ESR73408020 2 8 8 20 100
ESR73403001 0.1 3 6 8 60 ESR73410002 0.2 10 10 25 100
ESR73403002 0.2 3 6 8 60 ESR73410003 0.3 10 10 25 100
ESR73403003 0.3 3 6 8 60 ESR73410005 0.5 10 10 25 100
ESR73403005 0.5 3 6 8 60 ESR73410010 1 10 10 25 100
ESR73404001 0.1 4 6 10 70 ESR73410020 2 10 10 25 100
ESR73404002 0.2 4 6 10 70 ESR73412002 0.2 12 12 30 110
ESR73404002S4 0.2 4 4 10 70 ESR73412003 0.3 12 12 30 110
ESR73404003 0.3 4 6 10 70 ESR73412005 0.5 12 12 30 110
ESR73404005 0.5 4 6 10 70 ESR73412010 1 12 12 30 110
ESR73404005S4 0.5 4 4 10 70 ESR73412010L 1 12 12 30 150
ESR73404010 1 4 6 10 70 ESR73412020 2 12 12 30 110
ESR73405001 0.1 5 6 13 80
○ ◎ ◎ ○
60 KORLOY
ESR
t50-&3"/$&
DATA ØD Ød
ULTRA 45 R R ~ Ø6
FINE
AlTiN 0 ~ -0.012mm
h5
HELIX ±0.01 ±0.015 Ø8 ~ Ø12 0 ~ -0.015mm
13°
R 2
(mm)
ESR7060600314 0.3 6 6 6 14 50
ESR7060600514 0.5 6 6 6 14 50
ESR7060800524 0.5 8 8 8 24 60
ESR7060801024 1 8 8 8 24 60
ESR7061000530 0.5 10 10 10 30 70
ESR7061001030 1 10 10 10 30 70
ESR7061200530 0.5 12 12 12 30 75
ESR7061201030 1 12 12 12 30 75
○ ◎ ◎ ○
KORLOY
Y 61
Endmill
H-Star Endmill
ESR
SR736 6 Flutes radius endmill
t50-&3"/$&
DATA ØD Ød
ULTRA 45 R R ~ Ø6
FINE
AlTiN 0 ~ -0.012mm
h5
HELIX ±0.01 ±0.015 Ø8 ~ Ø12 0 ~ -0.015mm
(mm)
ESR73606005 0.5 6 6 15 90
ESR73606010 1 6 6 15 90
ESR73608005 0.5 8 8 20 100
ESR73608010 1 8 8 20 100
ESR73610005 0.5 10 10 25 100
ESR73610010 1 10 10 25 100
ESR73612005 0.5 12 12 30 110
ESR73612010 1 12 12 30 110
○ ◎ ◎ ○
62 KORLOY
ESR
SRB712 2 Flutes rib ball endmill
t50-&3"/$&
ØD Ød
ULTRA 30 R R AlTiN
DATA
~ Ø6 0 ~ -0.012mm
FINE ±0.005 ±0.008 h5
HELIX Ø8 ~ Ø12 0 ~ -0.015mm
R3 or Under Above R3 p.421~425
13°
1
R 2
(mm)
ESRB712001002 0.05 0.1 4 0.1 0.2 40 ESRB71200512 0.25 0.5 4 0.5 12 45

ESRB712001003 0.05 0.1 4 0.1 0.3 40 ESRB71200514 0.25 0.5 4 0.5 14 45
ESRB712001005 0.05 0.1 4 0.1 0.5 40 ESRB71200516 0.25 0.5 4 0.5 16 45
ESRB71200101 0.05 0.1 4 0.1 1 40 ESRB71200601 0.3 0.6 4 0.6 1 45
ESRB712002005 0.1 0.2 4 0.2 0.5 40 ESRB71200601S6 0.3 0.6 6 0.6 1 45
ESRB712002015 0.1 0.2 4 0.2 1.5 40 ESRB71200602 0.3 0.6 4 0.6 2 45
ESRB71200201 0.1 0.2 4 0.2 1 40 ESRB71200602S6 0.3 0.6 6 0.6 2 45
ESRB71200202 0.1 0.2 4 0.2 2 40 ESRB71200603 0.3 0.6 4 0.6 3 45
ESRB71200203 0.1 0.2 4 0.2 3 40 ESRB71200603S6 0.3 0.6 6 0.6 3 45
ESRB712003015 0.15 0.3 4 0.3 1.5 40 ESRB71200604 0.3 0.6 4 0.6 4 45
ESRB71200301 0.15 0.3 4 0.3 1 40 ESRB71200604S6 0.3 0.6 6 0.6 4 45
ESRB712003025 0.15 0.3 4 0.3 2.5 40 ESRB71200605 0.3 0.6 4 0.6 5 45
ESRB71200302 0.15 0.3 4 0.3 2 40 ESRB71200605S6 0.3 0.6 6 0.6 5 45
ESRB71200303 0.15 0.3 4 0.3 3 40 ESRB71200606 0.3 0.6 4 0.6 6 45
ESRB71200304 0.15 0.3 4 0.3 4 40 ESRB71200606S6 0.3 0.6 6 0.6 6 45
ESRB71200305 0.15 0.3 4 0.3 5 40 ESRB71200608 0.3 0.6 4 0.6 8 45
ESRB712004015 0.2 0.4 4 0.4 1.5 40 ESRB71200608S6 0.3 0.6 6 0.6 8 45
ESRB71200401 0.2 0.4 4 0.4 1 40 ESRB71200610 0.3 0.6 4 0.6 10 45
ESRB712004025 0.2 0.4 4 0.4 2.5 40 ESRB71200610S6 0.3 0.6 6 0.6 10 45
ESRB71200402 0.2 0.4 4 0.4 2 40 ESRB71200612 0.3 0.6 4 0.6 12 45
ESRB71200403 0.2 0.4 4 0.4 3 40 ESRB71200612S6 0.3 0.6 6 0.6 12 45
ESRB71200404 0.2 0.4 4 0.4 4 40 ESRB71200614 0.3 0.6 4 0.6 14 45
ESRB71200405 0.2 0.4 4 0.4 5 40 ESRB71200614S6 0.3 0.6 6 0.6 14 45
ESRB71200406 0.2 0.4 4 0.4 6 40 ESRB71200616 0.3 0.6 4 0.6 16 45
ESRB71200408 0.2 0.4 4 0.4 8 40 ESRB71200616S6 0.3 0.6 6 0.6 16 50
ESRB71200410 0.2 0.4 4 0.4 10 40 ESRB71200702 0.35 0.7 4 0.7 2 45
ESRB712005015 0.25 0.5 4 0.5 1.5 45 ESRB71200704 0.35 0.7 4 0.7 4 45
ESRB71200501 0.25 0.5 4 0.5 1 45 ESRB71200706 0.35 0.7 4 0.7 6 45
ESRB71200501S6 0.25 0.5 6 0.5 1 45 ESRB71200708 0.35 0.7 4 0.7 8 45
ESRB712005025 0.25 0.5 4 0.5 2.5 45 ESRB71200710 0.35 0.7 4 0.7 10 45
ESRB71200502 0.25 0.5 4 0.5 2 45 ESRB71200712 0.35 0.7 4 0.7 12 45
ESRB71200502S6 0.25 0.5 6 0.5 2 45 ESRB71200801 0.4 0.8 4 0.8 1 45
ESRB71200503 0.25 0.5 4 0.5 3 45 ESRB71200801S6 0.4 0.8 6 0.8 1 45
ESRB71200504 0.25 0.5 4 0.5 4 45 ESRB71200802 0.4 0.8 4 0.8 2 45
ESRB71200504S6 0.25 0.5 6 0.5 4 45 ESRB71200802S6 0.4 0.8 6 0.8 2 45
ESRB71200505 0.25 0.5 4 0.5 5 45 ESRB71200803 0.4 0.8 4 0.8 3 45
ESRB71200506 0.25 0.5 4 0.5 6 45 ESRB71200803S6 0.4 0.8 6 0.8 3 45
ESRB71200508 0.25 0.5 4 0.5 8 45 ESRB71200804 0.4 0.8 4 0.8 4 45
ESRB71200510 0.25 0.5 4 0.5 10 45 ESRB71200804S6 0.4 0.8 6 0.8 4 45
KORLOY
Y 63
Endmill
H-Star Endmill
ESR
t50-&3"/$&
ØD Ød
ULTRA 30 R R AlTiN
DATA
~ Ø6 0 ~ -0.012mm
FINE ±0.005 ±0.008 h5
HELIX Ø8 ~ Ø12 0 ~ -0.015mm
13°
1
R 2
(mm)
ESRB71200805 0.4 0.8 4 0.8 5 45 ESRB71201012S6 0.5 1 6 1 12 50

ESRB71200805S6 0.4 0.8 6 0.8 5 45 ESRB71201014 0.5 1 4 1 14 50
ESRB71200806 0.4 0.8 4 0.8 6 45 ESRB71201014S6 0.5 1 6 1 14 50
ESRB71200806S6 0.4 0.8 6 0.8 6 45 ESRB71201016 0.5 1 4 1 16 50
ESRB71200808 0.4 0.8 4 0.8 8 45 ESRB71201016S6 0.5 1 6 1 16 50
ESRB71200808S6 0.4 0.8 6 0.8 8 45 ESRB71201018 0.5 1 4 1 18 50
ESRB71200810 0.4 0.8 4 0.8 10 45 ESRB71201018S6 0.5 1 6 1 18 50
ESRB71200810S6 0.4 0.8 6 0.8 10 45 ESRB71201020 0.5 1 4 1 20 55
ESRB71200812 0.4 0.8 4 0.8 12 45 ESRB71201020S6 0.5 1 6 1 20 55
ESRB71200812S6 0.4 0.8 6 0.8 12 45 ESRB71201022 0.5 1 4 1 22 60
ESRB71200814 0.4 0.8 4 0.8 14 45 ESRB71201022S6 0.5 1 6 1 22 60
ESRB71200814S6 0.4 0.8 6 0.8 14 45 ESRB71201026 0.5 1 4 1 26 60
ESRB71200816 0.4 0.8 4 0.8 16 45 ESRB71201026S6 0.5 1 6 1 26 60
ESRB71200816S6 0.4 0.8 6 0.8 16 50 ESRB71201030 0.5 1 4 1 30 70
ESRB71200820 0.4 0.8 4 0.8 20 50 ESRB71201030S6 0.5 1 6 1 30 70
ESRB71200820S6 0.4 0.8 6 0.8 20 55 ESRB71201040 0.5 1 4 1 40 80
ESRB71200904 0.45 0.9 4 0.9 4 45 ESRB71201050 0.5 1 4 1 50 100
ESRB71200906 0.45 0.9 4 0.9 6 45 ESRB71201204 0.6 1.2 4 1.2 4 50
ESRB71200908 0.45 0.9 4 0.9 8 45 ESRB71201206 0.6 1.2 4 1.2 6 50
ESRB71200910 0.45 0.9 4 0.9 10 45 ESRB71201208 0.6 1.2 4 1.2 8 50
ESRB71201002 0.5 1 4 1 2 50 ESRB71201210 0.6 1.2 4 1.2 10 50
ESRB71201002S6 0.5 1 6 1 2 50 ESRB71201212 0.6 1.2 4 1.2 12 50
ESRB71201003 0.5 1 4 1 3 50 ESRB71201216 0.6 1.2 4 1.2 16 50
ESRB71201003S6 0.5 1 6 1 3 50 ESRB71201220 0.6 1.2 4 1.2 20 50
ESRB71201004 0.5 1 4 1 4 50 ESRB71201226 0.6 1.2 4 1.2 26 60
ESRB71201004S6 0.5 1 6 1 4 50 ESRB71201406 0.7 1.4 4 1.4 6 50
ESRB71201005 0.5 1 4 1 5 50 ESRB71201408 0.7 1.4 4 1.4 8 50
ESRB71201005S6 0.5 1 6 1 5 50 ESRB71201410 0.7 1.4 4 1.4 10 50
ESRB71201006 0.5 1 4 1 6 50 ESRB71201412 0.7 1.4 4 1.4 12 50
ESRB71201006S6 0.5 1 6 1 6 50 ESRB71201416 0.7 1.4 4 1.4 16 50
ESRB71201007 0.5 1 4 1 7 50 ESRB71201503 0.75 1.5 4 1.5 3 50
ESRB71201007S6 0.5 1 6 1 7 50 ESRB71201503S6 0.75 1.5 6 1.5 3 50
ESRB71201008 0.5 1 4 1 8 50 ESRB71201504 0.75 1.5 4 1.5 4 50
ESRB71201008S6 0.5 1 6 1 8 50 ESRB71201504S6 0.75 1.5 6 1.5 4 50
ESRB71201009 0.5 1 4 1 9 50 ESRB71201505 0.75 1.5 4 1.5 5 50
ESRB71201009S6 0.5 1 6 1 9 50 ESRB71201506 0.75 1.5 4 1.5 6 50
ESRB71201010 0.5 1 4 1 10 50 ESRB71201506S6 0.75 1.5 6 1.5 6 50
ESRB71201010S6 0.5 1 6 1 10 50 ESRB71201507 0.75 1.5 4 1.5 7 50
ESRB71201012 0.5 1 4 1 12 50 ESRB71201508 0.75 1.5 4 1.5 8 50
64 KORLOY
ESR
t50-&3"/$&
ØD Ød
ULTRA 30 R R AlTiN
DATA
~ Ø6 0 ~ -0.012mm
FINE ±0.005 ±0.008 h5
HELIX Ø8 ~ Ø12 0 ~ -0.015mm
13°
1
R 2
(mm)
ESRB71201508S6 0.75 1.5 6 1.5 8 50 ESRB71202006 1 2 4 2 6 50

ESRB71201510 0.75 1.5 4 1.5 10 50 ESRB71202006S6 1 2 6 2 6 50
ESRB71201510S6 0.75 1.5 6 1.5 10 50 ESRB71202008 1 2 4 2 8 50
ESRB71201512 0.75 1.5 4 1.5 12 50 ESRB71202008S6 1 2 6 2 8 50
ESRB71201512S6 0.75 1.5 6 1.5 12 50 ESRB71202010 1 2 4 2 10 50
ESRB71201514 0.75 1.5 4 1.5 14 50 ESRB71202010S6 1 2 6 2 10 50
ESRB71201514S6 0.75 1.5 6 1.5 14 50 ESRB71202012 1 2 4 2 12 50
ESRB71201516 0.75 1.5 4 1.5 16 50 ESRB71202012S6 1 2 6 2 12 50
ESRB71201516S6 0.75 1.5 6 1.5 16 50 ESRB71202014 1 2 4 2 14 50
ESRB71201518 0.75 1.5 4 1.5 18 50 ESRB71202014S6 1 2 6 2 14 50
ESRB71201518S6 0.75 1.5 6 1.5 18 50 ESRB71202016 1 2 4 2 16 50
ESRB71201520 0.75 1.5 4 1.5 20 55 ESRB71202016S6 1 2 6 2 16 50
ESRB71201520S6 0.75 1.5 6 1.5 20 55 ESRB71202018 1 2 4 2 18 55
ESRB71201522 0.75 1.5 4 1.5 22 60 ESRB71202018S6 1 2 6 2 18 55
ESRB71201522S6 0.75 1.5 6 1.5 22 60 ESRB71202020 1 2 4 2 20 55
ESRB71201526 0.75 1.5 4 1.5 26 60 ESRB71202020S6 1 2 6 2 20 55
ESRB71201526S6 0.75 1.5 6 1.5 26 60 ESRB71202022 1 2 4 2 22 60
ESRB71201530 0.75 1.5 4 1.5 30 70 ESRB71202022S6 1 2 6 2 22 60
ESRB71201530S6 0.75 1.5 6 1.5 30 70 ESRB71202026 1 2 4 2 26 60
ESRB71201535 0.75 1.5 4 1.5 35 70 ESRB71202026S6 1 2 6 2 26 60
ESRB71201535S6 0.75 1.5 6 1.5 35 70 ESRB71202030 1 2 4 2 30 70
ESRB71201540 0.75 1.5 4 1.5 40 80 ESRB71202030S6 1 2 6 2 30 70
ESRB71201540S6 0.75 1.5 6 1.5 40 80 ESRB71202035 1 2 4 2 35 70
ESRB71201604 0.8 1.6 4 1.6 4 50 ESRB71202035S6 1 2 6 2 35 70
ESRB71201606 0.8 1.6 4 1.6 6 50 ESRB71202040 1 2 4 2 40 80
ESRB71201608 0.8 1.6 4 1.6 8 50 ESRB71202040S6 1 2 6 2 40 80
ESRB71201610 0.8 1.6 4 1.6 10 50 ESRB71202045 1 2 4 2 45 90
ESRB71201612 0.8 1.6 4 1.6 12 50 ESRB71202045S6 1 2 6 2 45 90
ESRB71201616 0.8 1.6 4 1.6 16 50 ESRB71202050 1 2 4 2 50 100
ESRB71201620 0.8 1.6 4 1.6 20 50 ESRB71202050S6 1 2 6 2 50 100
ESRB71201804 0.9 1.8 4 1.8 4 50 ESRB71202060 1 2 4 2 60 110
ESRB71201806 0.9 1.8 4 1.8 6 50 ESRB71202508 1.25 2.5 4 2.5 8 50
ESRB71201808 0.9 1.8 4 1.8 8 50 ESRB71202510 1.25 2.5 4 2.5 10 50
ESRB71201810 0.9 1.8 4 1.8 10 50 ESRB71202512 1.25 2.5 4 2.5 12 50
ESRB71201812 0.9 1.8 4 1.8 12 50 ESRB71202516 1.25 2.5 4 2.5 16 50
ESRB71201816 0.9 1.8 4 1.8 16 50 ESRB71202520 1.25 2.5 4 2.5 20 50
ESRB71201820 0.9 1.8 4 1.8 20 50 ESRB71202522 1.25 2.5 4 2.5 22 60
ESRB71202004 1 2 4 2 4 50 ESRB71202526 1.25 2.5 4 2.5 26 60
ESRB71202004S6 1 2 6 2 4 50 ESRB71202530 1.25 2.5 4 2.5 30 70
KORLOY
Y 65
Endmill
H-Star Endmill
ESR
t50-&3"/$&
ØD Ød
ULTRA 30 R R AlTiN
DATA
~ Ø6 0 ~ -0.012mm
FINE ±0.005 ±0.008 h5
HELIX Ø8 ~ Ø12 0 ~ -0.015mm
13°
1
R 2
(mm)
ESRB71202535 1.25 2.5 4 2.5 35 70 ESRB71204030 2 4 6 4 30 70

ESRB71202540 1.25 2.5 4 2.5 40 80 ESRB71204035 2 4 6 4 35 70
ESRB71202545 1.25 2.5 4 2.5 45 90 ESRB71204040 2 4 6 4 40 80
ESRB71202550 1.25 2.5 4 2.5 50 100 ESRB71204045 2 4 6 4 45 90
ESRB71203006 1.5 3 6 3 6 50 ESRB71204050 2 4 6 4 50 100
ESRB71203008 1.5 3 6 3 8 50 ESRB71204055 2 4 6 4 55 100
ESRB71203010 1.5 3 6 3 10 50 ESRB71204060 2 4 6 4 60 100
ESRB71203012 1.5 3 6 3 12 50 ESRB71205015 2.5 5 6 6 15 60
ESRB71203014 1.5 3 6 3 14 60 ESRB71205020 2.5 5 6 6 20 60
ESRB71203016 1.5 3 6 3 16 60 ESRB71205026 2.5 5 6 6 26 65
ESRB71203018 1.5 3 6 3 18 60 ESRB71205030 2.5 5 6 6 30 70
ESRB71203020 1.5 3 6 3 20 60 ESRB71205035 2.5 5 6 6 35 70
ESRB71203022 1.5 3 6 3 22 65 ESRB71205040 2.5 5 6 6 40 80
ESRB71203026 1.5 3 6 3 26 65 ESRB71205045 2.5 5 6 6 45 90
ESRB71203030 1.5 3 6 3 30 70 ESRB71205050 2.5 5 6 6 50 100
ESRB71203035 1.5 3 6 3 35 70 ESRB71205055 2.5 5 6 6 55 100
ESRB71203040 1.5 3 6 3 40 80 ESRB71205060 2.5 5 6 6 60 100
ESRB71203045 1.5 3 6 3 45 90 ESRB7120602090 3 6 6 12 20 90
ESRB71203050 1.5 3 6 3 50 100 ESRB71206020 3 6 6 8 20 60
ESRB71203060 1.5 3 6 3 60 100 ESRB7120603090 3 6 6 12 30 90
ESRB71203510 1.75 3.5 6 3 10 50 ESRB71206030 3 6 6 8 30 60
ESRB71203516 1.75 3.5 6 3 16 60 ESRB71208025100 4 8 8 14 25 100
ESRB71203520 1.75 3.5 6 3 20 60 ESRB71208025 4 8 8 10 25 70
ESRB71203526 1.75 3.5 6 3 26 65 ESRB71208035100 4 8 8 14 35 100
ESRB71203530 1.75 3.5 6 3 30 70 ESRB71208035 4 8 8 10 35 70
ESRB71204008 2 4 6 4 8 50 ESRB71210030100 5 10 10 18 30 100
ESRB71204010 2 4 6 4 10 50 ESRB71210030 5 10 10 12 30 75
ESRB71204012 2 4 6 4 12 50 ESRB71210040100 5 10 10 18 40 100
ESRB71204014 2 4 6 4 14 60 ESRB71210040 5 10 10 12 40 75
ESRB71204016 2 4 6 4 16 60 ESRB71212032110 6 12 12 22 32 110
ESRB71204018 2 4 6 4 18 60 ESRB71212032 6 12 12 14 32 80
ESRB71204020 2 4 6 4 20 60 ESRB71212045110 6 12 12 22 45 110
ESRB71204022 2 4 6 4 22 65 ESRB71212045 6 12 12 14 45 80
ESRB71204026 2 4 6 4 26 65
○ ◎ ◎ ○
66 KORLOY
ESR
SRE712 2 Flutes rib neck type flat endmill
t50-&3"/$&
DATA ØD Ød
ULTRA 30 ~ Ø6
FINE
AlTiN 0 ~ -0.012mm
h5
HELIX Ø8 ~ Ø12 0 ~ -0.015mm
p.426~430
13°
1
2
(mm)
Designation ØD Ød ℓ1 ℓ2 L Designation ØD Ød ℓ1 ℓ2 L
ESRE712001003 0.1 4 0.15 0.3 40 ESRE71200603 0.6 4 0.9 3 45

ESRE712001005 0.1 4 0.15 0.5 40 ESRE71200604 0.6 4 0.9 4 45
ESRE71200101 0.1 4 0.15 1 40 ESRE71200605 0.6 4 0.9 5 45
ESRE712002005 0.2 4 0.3 0.5 40 ESRE71200606 0.6 4 0.9 6 45
ESRE712002015 0.2 4 0.3 1.5 40 ESRE71200608 0.6 4 0.9 8 45
ESRE71200201 0.2 4 0.3 1 40 ESRE71200610 0.6 4 0.9 10 45
ESRE71200202 0.2 4 0.3 2 40 ESRE71200612 0.6 4 0.9 12 45
ESRE712003015 0.3 4 0.5 1.5 40 ESRE71200614 0.6 4 0.9 14 45
ESRE71200301 0.3 4 0.5 1 40 ESRE71200616 0.6 4 0.9 16 45
ESRE712003025 0.3 4 0.5 2.5 40 ESRE71200702 0.7 4 1.2 2 45
ESRE71200302 0.3 4 0.5 2 40 ESRE71200704 0.7 4 1.2 4 45
ESRE71200303 0.3 4 0.5 3 40 ESRE71200706 0.7 4 1.2 6 45
ESRE71200304 0.3 4 0.5 4 40 ESRE71200708 0.7 4 1.2 8 45
ESRE71200305 0.4 4 0.5 5 40 ESRE71200710 0.7 4 1.2 10 45
ESRE712004015 0.4 4 0.6 1.5 40 ESRE71200712 0.7 4 1.2 12 45
ESRE71200401 0.4 4 0.6 1 40 ESRE71200802 0.8 4 1.2 2 45
ESRE712004025 0.4 4 0.6 2.5 40 ESRE71200803 0.8 4 1.2 3 45
ESRE71200402 0.4 4 0.6 2 40 ESRE71200804 0.8 4 1.2 4 45
ESRE71200403 0.4 4 0.6 3 40 ESRE71200805 0.8 4 1.2 5 45
ESRE71200404 0.4 4 0.6 4 40 ESRE71200806 0.8 4 1.2 6 45
ESRE71200405 0.4 4 0.6 5 40 ESRE71200808 0.8 4 1.2 8 45
ESRE71200406 0.4 4 0.6 6 40 ESRE71200810 0.8 4 1.2 10 45
ESRE71200408 0.4 4 0.6 8 40 ESRE71200812 0.8 4 1.2 12 45
ESRE71200410 0.5 4 0.6 10 40 ESRE71200814 0.8 4 1.2 14 45
ESRE712005015 0.5 4 0.7 1.5 45 ESRE71200816 0.8 4 1.2 16 45
ESRE71200501 0.5 4 0.7 1 45 ESRE71200820 0.8 4 1.2 20 50
ESRE712005025 0.5 4 0.7 2.5 45 ESRE71200906 0.9 4 1.3 6 45
ESRE71200502 0.5 4 0.7 2 45 ESRE71200908 0.9 4 1.3 8 45
ESRE71200503 0.5 4 0.7 3 45 ESRE71200910 0.9 4 1.3 10 45
ESRE71200504 0.5 4 0.7 4 45 ESRE71201002 1 4 1.5 2 50
ESRE71200505 0.5 4 0.7 5 45 ESRE71201003 1 4 1.5 3 50
ESRE71200506 0.5 4 0.7 6 45 ESRE71201004 1 4 1.5 4 50
ESRE71200508 0.5 4 0.7 8 45 ESRE71201005 1 4 1.5 5 50
ESRE71200510 0.5 4 0.7 10 45 ESRE71201006 1 4 1.5 6 50
ESRE71200512 0.5 4 0.7 12 45 ESRE71201007 1 4 1.5 7 50
ESRE71200514 0.5 4 0.7 14 45 ESRE71201008 1 4 1.5 8 50
ESRE71200516 0.5 4 0.7 16 45 ESRE71201010 1 4 1.5 10 50
ESRE71200602 0.6 4 0.9 2 45 ESRE71201012 1 4 1.5 12 50
KORLOY
Y 67
Endmill
H-Star Endmill
ESR
t50-&3"/$&
DATA ØD Ød
ULTRA 30 ~ Ø6
FINE
AlTiN 0 ~ -0.012mm
h5
HELIX Ø8 ~ Ø12 0 ~ -0.015mm
p.426~430
13°
1
2
(mm)
ESRE71201014 1 4 1.5 14 50 ESRE71201530 1.5 4 2.3 30 70

ESRE71201016 1 4 1.5 16 50 ESRE71201608 1.6 4 2.3 8 50
ESRE71201018 1 4 1.5 18 50 ESRE71201610 1.6 4 2.3 10 50
ESRE71201020 1 4 1.5 20 50 ESRE71201612 1.6 4 2.3 12 50
ESRE71201022 1 4 1.5 22 60 ESRE71201616 1.6 4 2.3 16 50
ESRE71201026 1 4 1.5 26 60 ESRE71201620 1.6 4 2.3 20 50
ESRE71201030 1 4 1.5 30 70 ESRE71201808 1.8 4 2.7 8 50
ESRE71201040 1 4 1.5 40 80 ESRE71201810 1.8 4 2.7 10 50
ESRE71201050 1 4 1.5 50 100 ESRE71201812 1.8 4 2.7 12 50
ESRE71201204 1.2 4 1.8 4 50 ESRE71201816 1.8 4 2.7 16 50
ESRE71201206 1.2 4 1.8 6 50 ESRE71201820 1.8 4 2.7 20 50
ESRE71201208 1.2 4 1.8 8 50 ESRE71202006 2 4 3 6 50
ESRE71201210 1.2 4 1.8 10 50 ESRE71202008 2 4 3 8 50
ESRE71201212 1.2 4 1.8 12 50 ESRE71202010 2 4 3 10 50
ESRE71201214 1.2 4 1.8 14 50 ESRE71202012 2 4 3 12 50
ESRE71201216 1.2 4 1.8 16 50 ESRE71202014 2 4 3 14 50
ESRE71201220 1.2 4 1.8 20 50 ESRE71202016 2 4 3 16 50
ESRE71201226 1.2 4 1.8 26 60 ESRE71202018 2 4 3 18 50
ESRE71201230 1.2 4 1.8 30 70 ESRE71202020 2 4 3 20 50
ESRE71201406 1.4 4 2.1 6 50 ESRE71202022 2 4 3 22 60
ESRE71201408 1.4 4 2.1 8 50 ESRE71202026 2 4 3 26 60
ESRE71201410 1.4 4 2.1 10 50 ESRE71202030 2 4 3 30 70
ESRE71201414 1.4 4 2.1 14 50 ESRE71202035 2 4 3 35 70
ESRE71201416 1.4 4 2.1 16 50 ESRE71202040 2 4 3 40 80
ESRE71201420 1.4 4 2.1 20 50 ESRE71202045 2 4 3 45 90
ESRE71201504 1.5 4 2.3 4 50 ESRE71202050 2 4 3 50 100
ESRE71201505 1.5 4 2.3 5 50 ESRE71202060 2 4 3 60 110
ESRE71201506 1.5 4 2.3 6 50 ESRE71202508 2.5 4 4 8 50
ESRE71201507 1.5 4 2.3 7 50 ESRE71202510 2.5 4 4 10 50
ESRE71201508 1.5 4 2.3 8 50 ESRE71202512 2.5 4 4 12 50
ESRE71201510 1.5 4 2.3 10 50 ESRE71202514 2.5 4 4 14 50
ESRE71201512 1.5 4 2.3 12 50 ESRE71202516 2.5 4 4 16 50
ESRE71201514 1.5 4 2.3 14 50 ESRE71202518 2.5 4 4 18 50
ESRE71201516 1.5 4 2.3 16 50 ESRE71202520 2.5 4 4 20 50
ESRE71201518 1.5 4 2.3 18 50 ESRE71202522 2.5 4 4 22 60
ESRE71201520 1.5 4 2.3 20 50 ESRE71202526 2.5 4 4 26 60
ESRE71201522 1.5 4 2.3 22 60 ESRE71202530 2.5 4 4 30 70
ESRE71201526 1.5 4 2.3 26 60 ESRE71202535 2.5 4 4 35 70
68 KORLOY
ESR
t50-&3"/$&
DATA ØD Ød
ULTRA 30 ~ Ø6
FINE
AlTiN 0 ~ -0.012mm
h5
HELIX Ø8 ~ Ø12 0 ~ -0.015mm
p.426~430
13°
1
2
(mm)
ESRE71202540 2.5 4 4 40 80 ESRE71204030 4 6 6 30 70

ESRE71202545 2.5 4 4 45 90 ESRE71204035 4 6 6 35 70
ESRE71202550 2.5 4 4 50 100 ESRE71204040 4 6 6 40 80
ESRE71203006 3 6 4.5 6 50 ESRE71204045 4 6 6 45 90
ESRE71203008 3 6 4.5 8 50 ESRE71204050 4 6 6 50 100
ESRE71203010 3 6 4.5 10 50 ESRE71204060 4 6 6 60 100
ESRE71203012 3 6 4.5 12 50 ESRE71205016 5 6 8 16 60
ESRE71203014 3 6 4.5 14 60 ESRE71205020 5 6 8 20 60
ESRE71203016 3 6 4.5 16 60 ESRE71205026 5 6 8 26 65
ESRE71203018 3 6 4.5 18 60 ESRE71205030 5 6 8 30 70
ESRE71203020 3 6 4.5 20 60 ESRE71205035 5 6 8 35 75
ESRE71203022 3 6 4.5 22 65 ESRE71205040 5 6 8 40 80
ESRE71203026 3 6 4.5 26 65 ESRE71205050 5 6 8 50 90
ESRE71203030 3 6 4.5 30 70 ESRE71205060 5 6 8 60 100
ESRE71203035 3 6 4.5 35 70 ESRE71206015 6 6 9 15 60
ESRE71203040 3 6 4.5 40 80 ESRE71206020 6 6 9 20 60
ESRE71203045 3 6 4.5 45 90 ESRE71206030 6 6 9 30 70
ESRE71203050 3 6 4.5 50 100 ESRE71206032 6 6 9 32 90
ESRE71203060 3 6 4.5 60 100 ESRE71208025 8 8 12 25 70
ESRE71204008 4 6 6 8 50 ESRE71208030 8 8 12 30 80
ESRE71204010 4 6 6 10 50 ESRE71208042 8 8 12 42 100
ESRE71204012 4 6 6 12 50 ESRE71210030 10 10 15 30 75
ESRE71204014 4 6 6 14 60 ESRE71210035 10 10 15 35 80
ESRE71204016 4 6 6 16 60 ESRE71210045 10 10 15 45 100
ESRE71204018 4 6 6 18 60 ESRE71212035 12 12 20 35 80
ESRE71204020 4 6 6 20 60 ESRE71212040 12 12 20 40 90
ESRE71204022 4 6 6 22 65 ESRE71212050 12 12 20 50 110
ESRE71204026 4 6 6 26 65
○ ◎ ◎ ○
KORLOY
Y 69
Endmill
H-Star Endmill
ESR
SRE714 4 Flutes rib sqaure endmill
t50-&3"/$&
DATA ØD Ød
ULTRA 30 ~ Ø6
FINE
AlTiN 0 ~ -0.012mm
h5
HELIX Ø8 ~ Ø12 0 ~ -0.015mm
p.431~434
13°
R 2
(mm)
ESRE71400501 0.5 4 0.5 1 40 ESRE71401008 1 4 1 8 45

ESRE71400502 0.5 4 0.5 2 40 ESRE71401010 1 4 1 10 50
ESRE71400503 0.5 4 0.5 3 45 ESRE71401012 1 4 1 12 50
ESRE71400504 0.5 4 0.5 4 45 ESRE71401014 1 4 1 14 50
ESRE71400505 0.5 4 0.5 5 45 ESRE71401016 1 4 1 16 50
ESRE71400506 0.5 4 0.5 6 45 ESRE71401018 1 4 1 18 60
ESRE71400508 0.5 4 0.5 8 45 ESRE71401020 1 4 1 20 60
ESRE71400510 0.5 4 0.5 10 50 ESRE71401204 1.2 4 1.2 4 45
ESRE71400601 0.6 4 0.6 1 45 ESRE71401206 1.2 4 1.2 6 45
ESRE71400602 0.6 4 0.6 2 45 ESRE71401208 1.2 4 1.2 8 45
ESRE71400603 0.6 4 0.6 3 45 ESRE71401210 1.2 4 1.2 10 50
ESRE71400604 0.6 4 0.6 4 45 ESRE71401212 1.2 4 1.2 12 50
ESRE71400605 0.6 4 0.6 5 45 ESRE71401216 1.2 4 1.2 16 50
ESRE71400606 0.6 4 0.6 6 45 ESRE71401218 1.2 4 1.2 18 60
ESRE71400608 0.6 4 0.6 8 45 ESRE71401220 1.2 4 1.2 20 60
ESRE71400610 0.6 4 0.6 10 50 ESRE71401406 1.4 4 1.4 6 45
ESRE71400612 0.6 4 0.6 12 50 ESRE71401408 1.4 4 1.4 8 45
ESRE71400702 0.7 4 0.7 2 45 ESRE71401410 1.4 4 1.4 10 50
ESRE71400704 0.7 4 0.7 4 45 ESRE71401412 1.4 4 1.4 12 50
ESRE71400706 0.7 4 0.7 6 45 ESRE71401414 1.4 4 1.4 14 50
ESRE71400708 0.7 4 0.7 8 45 ESRE71401416 1.4 4 1.4 16 50
ESRE71400710 0.7 4 0.7 10 50 ESRE71401504 1.5 4 1.5 4 45
ESRE71400801 0.8 4 0.8 1 40 ESRE71401506 1.5 4 1.5 6 45
ESRE71400802 0.8 4 0.8 2 40 ESRE71401508 1.5 4 1.5 8 45
ESRE71400803 0.8 4 0.8 3 40 ESRE71401510 1.5 4 1.5 10 50
ESRE71400804 0.8 4 0.8 4 40 ESRE71401512 1.5 4 1.5 12 50
ESRE71400805 0.8 4 0.8 5 40 ESRE71401516 1.5 4 1.5 16 50
ESRE71400806 0.8 4 0.8 6 40 ESRE71401518 1.5 4 1.5 18 60
ESRE71400808 0.8 4 0.8 8 40 ESRE71401520 1.5 4 1.5 20 60
ESRE71400810 0.8 4 0.8 10 50 ESRE71401525 1.5 4 1.5 25 60
ESRE71400812 0.8 4 0.8 12 50 ESRE71401530 1.5 4 1.5 30 70
ESRE71400816 0.8 4 0.8 16 50 ESRE71401606 1.6 4 1.6 6 45
ESRE71401002 1 4 1 2 45 ESRE71401608 1.6 4 1.6 8 45
ESRE71401003 1 4 1 3 45 ESRE71401610 1.6 4 1.6 10 50
ESRE71401004 1 4 1 4 45 ESRE71401612 1.6 4 1.6 12 50
ESRE71401006 1 4 1 6 45 ESRE71401614 1.6 4 1.6 14 50
70 KORLOY
ESR
t50-&3"/$&
DATA ØD Ød
ULTRA 30 ~ Ø6
FINE
AlTiN 0 ~ -0.012mm
h5
HELIX Ø8 ~ Ø12 0 ~ -0.015mm
p.431~434
13°
R 2
(mm)
ESRE71401616 1.6 4 1.6 16 50 ESRE71403030 3 6 3 30 70

ESRE71401618 1.6 4 1.6 18 60 ESRE71403035 3 6 3 35 75
ESRE71401620 1.6 4 1.6 20 60 ESRE71403040 3 6 3 40 80
ESRE71401625 1.6 4 1.6 25 70 ESRE71403045 3 6 3 45 90
ESRE71401806 1.8 4 1.8 6 45 ESRE71403050 3 6 3 50 100
ESRE71401808 1.8 4 1.8 8 45 ESRE71403060 3 6 3 60 110
ESRE71401810 1.8 4 1.8 10 50 ESRE71403512 3.5 6 3.5 12 50
ESRE71401812 1.8 4 1.8 12 50 ESRE71403516 3.5 6 3.5 16 55
ESRE71401816 1.8 4 1.8 16 50 ESRE71403520 3.5 6 3.5 20 60
ESRE71401820 1.8 4 1.8 20 60 ESRE71403525 3.5 6 3.5 25 65
ESRE71401825 1.8 4 1.8 25 70 ESRE71403530 3.5 6 3.5 30 70
ESRE71402004 2 4 2 4 45 ESRE71403535 3.5 6 3.5 35 75
ESRE71402006 2 4 2 6 45 ESRE71403540 3.5 6 3.5 40 80
ESRE71402008 2 4 2 8 45 ESRE71404006 4 6 4 6 50
ESRE71402010 2 4 2 10 50 ESRE71404008 4 6 4 8 50
ESRE71402012 2 4 2 12 50 ESRE71404010 4 6 4 10 50
ESRE71402014 2 4 2 14 50 ESRE71404012 4 6 4 12 50
ESRE71402016 2 4 2 16 50 ESRE71404016 4 6 4 16 55
ESRE71402018 2 4 2 18 50 ESRE71404020 4 6 4 20 60
ESRE71402020 2 4 2 20 50 ESRE71404025 4 6 4 25 65
ESRE71402022 2 4 2 22 60 ESRE71404030 4 6 4 30 70
ESRE71402025 2 4 2 25 60 ESRE71404040 4 6 4 40 80
ESRE71402030 2 4 2 30 70 ESRE71404045 4 6 4 45 90
ESRE71402510 2.5 4 2.5 10 50 ESRE71404050 4 6 4 50 100
ESRE71402512 2.5 4 2.5 12 50 ESRE71404060 4 6 4 60 110
ESRE71402516 2.5 4 2.5 16 50 ESRE71404512 4.5 6 4.5 12 50
ESRE71402520 2.5 4 2.5 20 50 ESRE71404516 4.5 6 4.5 16 55
ESRE71402525 2.5 4 2.5 25 60 ESRE71404520 4.5 6 4.5 20 60
ESRE71402530 2.5 4 2.5 30 70 ESRE71404525 4.5 6 4.5 25 65
ESRE71403006 3 6 3 6 45 ESRE71404530 4.5 6 4.5 30 70
ESRE71403008 3 6 3 8 45 ESRE71404540 4.5 6 4.5 40 80
ESRE71403010 3 6 3 10 50 ESRE71405016 5 6 5 16 60
ESRE71403012 3 6 3 12 50 ESRE71405020 5 6 5 20 60
ESRE71403016 3 6 3 16 55 ESRE71405025 5 6 5 25 65
ESRE71403020 3 6 3 20 60 ESRE71405030 5 6 5 30 70
ESRE71403025 3 6 3 25 65 ESRE71405040 5 6 5 40 80
KORLOY
Y 71
Endmill
H-Star Endmill
ESR
t50-&3"/$&
DATA ØD Ød
ULTRA 30 ~ Ø6
FINE
AlTiN 0 ~ -0.012mm
h5
HELIX Ø8 ~ Ø12 0 ~ -0.015mm
p.431~434
13°
R 2
(mm)
ESRE71405050 5 6 5 50 100 ESRE71408040 8 8 12 40 100

ESRE71405060 5 6 5 60 110 ESRE71408050 8 8 12 50 110
ESRE71406020 6 6 6 20 60 ESRE71410030 10 10 15 30 70
ESRE71406030 6 6 6 30 75 ESRE71410050 10 10 15 50 100
ESRE71406040 6 6 6 40 80 ESRE71410060 10 10 15 60 120
ESRE71406050 6 6 6 50 90 ESRE71412040 12 12 18 40 80
ESRE71406060 6 6 6 60 100 ESRE71412060 12 12 18 60 110
ESRE71408025 8 8 12 25 65 ESRE71412070 12 12 18 70 130
○ ◎ ◎ ○
72 KORLOY
ESR
SRR712 2 Flutes rib radius endmill
t50-&3"/$&
DATA ØD Ød
ULTRA 30 ~ Ø6
FINE
AlTiN 0 ~ -0.012mm
h5
HELIX Ø8 ~ Ø16 0 ~ -0.015mm
p.435~444
13°
R 2
(mm)
ESRR712002002005 0.02 0.2 4 0.2 0.5 40 ESRR71200500503 0.05 0.5 4 0.5 3 45

ESRR71200200201 0.02 0.2 4 0.2 1 40 ESRR71200500504 0.05 0.5 4 0.5 4 45
ESRR712002002015 0.02 0.2 4 0.2 1.5 40 ESRR71200500505 0.05 0.5 4 0.5 5 45
ESRR712002005005 0.05 0.2 4 0.2 0.5 40 ESRR71200500506 0.05 0.5 4 0.5 6 45
ESRR71200200501 0.05 0.2 4 0.2 1 40 ESRR71200500508 0.05 0.5 4 0.5 8 45
ESRR712002005015 0.05 0.2 4 0.2 1.5 40 ESRR71200500510 0.05 0.5 4 0.5 10 45
ESRR71200300201 0.02 0.3 4 0.3 1 40 ESRR71200501001 0.1 0.5 4 0.5 1 45
ESRR71200300202 0.02 0.3 4 0.3 2 40 ESRR712005010015 0.1 0.5 4 0.5 1.5 45
ESRR71200300203 0.02 0.3 4 0.3 3 40 ESRR71200501002 0.1 0.5 4 0.5 2 45
ESRR71200300501 0.05 0.3 4 0.3 1 40 ESRR712005010025 0.1 0.5 4 0.5 2.5 45
ESRR71200300502 0.05 0.3 4 0.3 2 40 ESRR71200501003 0.1 0.5 4 0.5 3 45
ESRR71200300503 0.05 0.3 4 0.3 3 40 ESRR71200501004 0.1 0.5 4 0.5 4 45
ESRR71200400201 0.02 0.4 4 0.4 1 40 ESRR71200501005 0.1 0.5 4 0.5 5 45
ESRR71200400202 0.02 0.4 4 0.4 2 40 ESRR71200501006 0.1 0.5 4 0.5 6 45
ESRR71200400203 0.02 0.4 4 0.4 3 40 ESRR71200501008 0.1 0.5 4 0.5 8 45
ESRR71200400204 0.02 0.4 4 0.4 4 40 ESRR71200501010 0.1 0.5 4 0.5 10 45
ESRR71200400501 0.05 0.4 4 0.4 1 40 ESRR71200600202 0.02 0.6 4 0.6 2 45
ESRR71200400502 0.05 0.4 4 0.4 2 40 ESRR71200600203 0.02 0.6 4 0.6 3 45
ESRR71200400503 0.05 0.4 4 0.4 3 40 ESRR71200600204 0.02 0.6 4 0.6 4 45
ESRR71200400504 0.05 0.4 4 0.4 4 40 ESRR71200600206 0.02 0.6 4 0.6 6 45
ESRR71200401001 0.1 0.4 4 0.4 1 40 ESRR71200600208 0.02 0.6 4 0.6 8 45
ESRR712004010015 0.1 0.4 4 0.4 1.5 40 ESRR71200600210 0.02 0.6 4 0.6 10 45
ESRR71200401002 0.1 0.4 4 0.4 2 40 ESRR71200600212 0.02 0.6 4 0.6 12 50
ESRR71200401003 0.1 0.4 4 0.4 3 40 ESRR71200600502 0.05 0.6 4 0.6 2 45
ESRR71200401004 0.1 0.4 4 0.4 4 40 ESRR71200600503 0.05 0.6 4 0.6 3 45
ESRR71200500201 0.02 0.5 4 0.5 1 45 ESRR71200600504 0.05 0.6 4 0.6 4 45
ESRR712005002015 0.02 0.5 4 0.5 1.5 45 ESRR71200600506 0.05 0.6 4 0.6 6 45
ESRR71200500202 0.02 0.5 4 0.5 2 45 ESRR71200600508 0.05 0.6 4 0.6 8 45
ESRR712005002025 0.02 0.5 4 0.5 2.5 45 ESRR71200600510 0.05 0.6 4 0.6 10 45
ESRR71200500203 0.02 0.5 4 0.5 3 45 ESRR71200600512 0.05 0.6 4 0.6 12 50
ESRR71200500204 0.02 0.5 4 0.5 4 45 ESRR71200601002 0.1 0.6 4 0.6 2 45
ESRR71200500205 0.02 0.5 4 0.5 5 45 ESRR71200601003 0.1 0.6 4 0.6 3 45
ESRR71200500206 0.02 0.5 4 0.5 6 45 ESRR71200601004 0.1 0.6 4 0.6 4 45
ESRR71200500208 0.02 0.5 4 0.5 8 45 ESRR71200601006 0.1 0.6 4 0.6 6 45
ESRR71200500210 0.02 0.5 4 0.5 10 45 ESRR71200601008 0.1 0.6 4 0.6 8 45
ESRR71200500501 0.05 0.5 4 0.5 1 45 ESRR71200601010 0.1 0.6 4 0.6 10 45
ESRR712005005015 0.05 0.5 4 0.5 1.5 45 ESRR71200601012 0.1 0.6 4 0.6 12 50
ESRR71200500502 0.05 0.5 4 0.5 2 45 ESRR71200701002 0.1 0.7 4 0.7 2 45
ESRR712005005025 0.05 0.5 4 0.5 2.5 45 ESRR71200701004 0.1 0.7 4 0.7 4 45
KORLOY
Y 73
Endmill
H-Star Endmill
ESR
t50-&3"/$&
DATA ØD Ød
ULTRA 30 ~ Ø6
FINE
AlTiN 0 ~ -0.012mm
h5
HELIX Ø8 ~ Ø16 0 ~ -0.015mm
p.435~444
13°
R 2
(mm)
ESRR71200701006 0.1 0.7 4 0.7 6 45 ESRR71201000512 0.05 1 4 1 12 50

ESRR71200701008 0.1 0.7 4 0.7 8 45 ESRR71201000514 0.05 1 4 1 14 50
ESRR71200701010 0.1 0.7 4 0.7 10 45 ESRR71201000516 0.05 1 4 1 16 50
ESRR71200800202 0.02 0.8 4 0.8 2 45 ESRR71201000520 0.05 1 4 1 20 50
ESRR71200800204 0.02 0.8 4 0.8 4 45 ESRR71201001004 0.1 1 4 1 4 45
ESRR71200800206 0.02 0.8 4 0.8 6 45 ESRR71201001006 0.1 1 4 1 6 45
ESRR71200800208 0.02 0.8 4 0.8 8 45 ESRR71201001008 0.1 1 4 1 8 45
ESRR71200800210 0.02 0.8 4 0.8 10 45 ESRR71201001010 0.1 1 4 1 10 50
ESRR71200800212 0.02 0.8 4 0.8 12 50 ESRR71201001012 0.1 1 4 1 12 50
ESRR71200800502 0.05 0.8 4 0.8 2 45 ESRR71201001014 0.1 1 4 1 14 50
ESRR71200800504 0.05 0.8 4 0.8 4 45 ESRR71201001016 0.1 1 4 1 16 50
ESRR71200800506 0.05 0.8 4 0.8 6 45 ESRR71201001020 0.1 1 4 1 20 50
ESRR71200800508 0.05 0.8 4 0.8 8 45 ESRR71201002004 0.2 1 4 1 4 45
ESRR71200800510 0.05 0.8 4 0.8 10 45 ESRR71201002006 0.2 1 4 1 6 45
ESRR71200800512 0.05 0.8 4 0.8 12 50 ESRR71201002008 0.2 1 4 1 8 45
ESRR71200801002 0.1 0.8 4 0.8 2 45 ESRR71201002010 0.2 1 4 1 10 50
ESRR71200801004 0.1 0.8 4 0.8 4 45 ESRR71201002012 0.2 1 4 1 12 50
ESRR71200801006 0.1 0.8 4 0.8 6 45 ESRR71201002014 0.2 1 4 1 14 50
ESRR71200801008 0.1 0.8 4 0.8 8 45 ESRR71201002016 0.2 1 4 1 16 50
ESRR71200801010 0.1 0.8 4 0.8 10 45 ESRR71201002020 0.2 1 4 1 20 50
ESRR71200801012 0.1 0.8 4 0.8 12 50 ESRR71201003004 0.3 1 4 1 4 45
ESRR71200802002 0.2 0.8 4 0.8 2 45 ESRR71201003006 0.3 1 4 1 6 45
ESRR71200802004 0.2 0.8 4 0.8 4 45 ESRR71201003008 0.3 1 4 1 8 45
ESRR71200802006 0.2 0.8 4 0.8 6 45 ESRR71201003010 0.3 1 4 1 10 50
ESRR71200802008 0.2 0.8 4 0.8 8 45 ESRR71201003012 0.3 1 4 1 12 50
ESRR71200802010 0.2 0.8 4 0.8 10 45 ESRR71201003014 0.3 1 4 1 14 50
ESRR71200802012 0.2 0.8 4 0.8 12 50 ESRR71201003016 0.3 1 4 1 16 50
ESRR71201000204 0.02 1 4 1 4 45 ESRR71201003020 0.3 1 4 1 20 50
ESRR71201000206 0.02 1 4 1 6 45 ESRR71201200204 0.02 1.2 4 1.2 4 45
ESRR71201000208 0.02 1 4 1 8 45 ESRR71201200206 0.02 1.2 4 1.2 6 45
ESRR71201000210 0.02 1 4 1 10 50 ESRR71201200208 0.02 1.2 4 1.2 8 45
ESRR71201000212 0.02 1 4 1 12 50 ESRR71201200210 0.02 1.2 4 1.2 10 50
ESRR71201000214 0.02 1 4 1 14 50 ESRR71201200212 0.02 1.2 4 1.2 12 50
ESRR71201000216 0.02 1 4 1 16 50 ESRR71201200214 0.02 1.2 4 1.2 14 50
ESRR71201000220 0.02 1 4 1 20 50 ESRR71201200216 0.02 1.2 4 1.2 16 50
ESRR71201000504 0.05 1 4 1 4 45 ESRR71201200220 0.02 1.2 4 1.2 20 50
ESRR71201000506 0.05 1 4 1 6 45 ESRR71201200504 0.05 1.2 4 1.2 4 45
ESRR71201000508 0.05 1 4 1 8 45 ESRR71201200506 0.05 1.2 4 1.2 6 45
ESRR71201000510 0.05 1 4 1 10 50 ESRR71201200508 0.05 1.2 4 1.2 8 45
74 KORLOY
ESR
t50-&3"/$&
DATA ØD Ød
ULTRA 30 ~ Ø6
FINE
AlTiN 0 ~ -0.012mm
h5
HELIX Ø8 ~ Ø16 0 ~ -0.015mm
p.435~444
13°
R 2
(mm)
ESRR71201200510 0.05 1.2 4 1.2 10 50 ESRR71201500508 0.05 1.5 4 1.5 8 45

ESRR71201200512 0.05 1.2 4 1.2 12 50 ESRR71201500510 0.05 1.5 4 1.5 10 50
ESRR71201200514 0.05 1.2 4 1.2 14 50 ESRR71201500512 0.05 1.5 4 1.5 12 50
ESRR71201200516 0.05 1.2 4 1.2 16 50 ESRR71201500514 0.05 1.5 4 1.5 14 50
ESRR71201200520 0.05 1.2 4 1.2 20 50 ESRR71201500516 0.05 1.5 4 1.5 16 50
ESRR71201201004 0.1 1.2 4 1.2 4 45 ESRR71201500520 0.05 1.5 4 1.5 20 50
ESRR71201201006 0.1 1.2 4 1.2 6 45 ESRR71201501004 0.1 1.5 4 1.5 4 45
ESRR71201201008 0.1 1.2 4 1.2 8 45 ESRR71201501006 0.1 1.5 4 1.5 6 45
ESRR71201201010 0.1 1.2 4 1.2 10 50 ESRR71201501008 0.1 1.5 4 1.5 8 45
ESRR71201201012 0.1 1.2 4 1.2 12 50 ESRR71201501010 0.1 1.5 4 1.5 10 50
ESRR71201201014 0.1 1.2 4 1.2 14 50 ESRR71201501012 0.1 1.5 4 1.5 12 50
ESRR71201201016 0.1 1.2 4 1.2 16 50 ESRR71201501014 0.1 1.5 4 1.5 14 50
ESRR71201201020 0.1 1.2 4 1.2 20 50 ESRR71201501016 0.1 1.5 4 1.5 16 50
ESRR71201202004 0.2 1.2 4 1.2 4 45 ESRR71201501020 0.1 1.5 4 1.5 20 50
ESRR71201202006 0.2 1.2 4 1.2 6 45 ESRR71201502004 0.2 1.5 4 1.5 4 45
ESRR71201202008 0.2 1.2 4 1.2 8 45 ESRR71201502006 0.2 1.5 4 1.5 6 45
ESRR71201202010 0.2 1.2 4 1.2 10 50 ESRR71201502008 0.2 1.5 4 1.5 8 45
ESRR71201202012 0.2 1.2 4 1.2 12 50 ESRR71201502010 0.2 1.5 4 1.5 10 50
ESRR71201202014 0.2 1.2 4 1.2 14 50 ESRR71201502012 0.2 1.5 4 1.5 12 50
ESRR71201202016 0.2 1.2 4 1.2 16 50 ESRR71201502014 0.2 1.5 4 1.5 14 50
ESRR71201202020 0.2 1.2 4 1.2 20 50 ESRR71201502016 0.2 1.5 4 1.5 16 50
ESRR71201203004 0.3 1.2 4 1.2 4 45 ESRR71201502020 0.2 1.5 4 1.5 20 50
ESRR71201203006 0.3 1.2 4 1.2 6 45 ESRR71201503004 0.3 1.5 4 1.5 4 45
ESRR71201203008 0.3 1.2 4 1.2 8 45 ESRR71201503006 0.3 1.5 4 1.5 6 45
ESRR71201203010 0.3 1.2 4 1.2 10 50 ESRR71201503008 0.3 1.5 4 1.5 8 45
ESRR71201203012 0.3 1.2 4 1.2 12 50 ESRR71201503010 0.3 1.5 4 1.5 10 50
ESRR71201203014 0.3 1.2 4 1.2 14 50 ESRR71201503012 0.3 1.5 4 1.5 12 50
ESRR71201203016 0.3 1.2 4 1.2 16 50 ESRR71201503014 0.3 1.5 4 1.5 14 50
ESRR71201203020 0.3 1.2 4 1.2 20 50 ESRR71201503016 0.3 1.5 4 1.5 16 50
ESRR71201500204 0.02 1.5 4 1.5 4 45 ESRR71201503020 0.3 1.5 4 1.5 20 50
ESRR71201500206 0.02 1.5 4 1.5 6 45 ESRR71201505004 0.5 1.5 4 1.5 4 45
ESRR71201500208 0.02 1.5 4 1.5 8 45 ESRR71201505006 0.5 1.5 4 1.5 6 45
ESRR71201500210 0.02 1.5 4 1.5 10 50 ESRR71201505008 0.5 1.5 4 1.5 8 45
ESRR71201500212 0.02 1.5 4 1.5 12 50 ESRR71201505010 0.5 1.5 4 1.5 10 50
ESRR71201500214 0.02 1.5 4 1.5 14 50 ESRR71201505012 0.5 1.5 4 1.5 12 50
ESRR71201500216 0.02 1.5 4 1.5 16 50 ESRR71201505014 0.5 1.5 4 1.5 14 50
ESRR71201500220 0.02 1.5 4 1.5 20 50 ESRR71201505016 0.5 1.5 4 1.5 16 50
ESRR71201500504 0.05 1.5 4 1.5 4 45 ESRR71201505020 0.5 1.5 4 1.5 20 50
ESRR71201500506 0.05 1.5 4 1.5 6 45 ESRR71202000206 0.02 2 4 2 6 45
KORLOY
Y 75
Endmill
H-Star Endmill
ESR
t50-&3"/$&
DATA ØD Ød
ULTRA 30 ~ Ø6
FINE
AlTiN 0 ~ -0.012mm
h5
HELIX Ø8 ~ Ø16 0 ~ -0.015mm
p.435~444
13°
R 2
(mm)
ESRR71202000208 0.02 2 4 2 8 45 ESRR71202003020 0.3 2 4 2 20 50

ESRR71202000210 0.02 2 4 2 10 50 ESRR71202003025 0.3 2 4 2 25 60
ESRR71202000212 0.02 2 4 2 12 50 ESRR71202003030 0.3 2 4 2 30 70
ESRR71202000214 0.02 2 4 2 14 50 ESRR71202005006 0.5 2 4 2 6 45
ESRR71202000216 0.02 2 4 2 16 50 ESRR71202005008 0.5 2 4 2 8 45
ESRR71202000220 0.02 2 4 2 20 50 ESRR71202005010 0.5 2 4 2 10 50
ESRR71202000225 0.02 2 4 2 25 60 ESRR71202005012 0.5 2 4 2 12 50
ESRR71202000506 0.05 2 4 2 6 45 ESRR71202005014 0.5 2 4 2 14 50
ESRR71202000508 0.05 2 4 2 8 45 ESRR71202005016 0.5 2 4 2 16 50
ESRR71202000510 0.05 2 4 2 10 50 ESRR71202005020 0.5 2 4 2 20 50
ESRR71202000512 0.05 2 4 2 12 50 ESRR71202005025 0.5 2 4 2 25 60
ESRR71202000514 0.05 2 4 2 14 50 ESRR71202005030 0.5 2 4 2 30 70
ESRR71202000516 0.05 2 4 2 16 50 ESRR71202501010 0.1 2.5 4 2.5 10 50
ESRR71202000520 0.05 2 4 2 20 50 ESRR71202501016 0.1 2.5 4 2.5 16 50
ESRR71202000525 0.05 2 4 2 25 60 ESRR71202501020 0.1 2.5 4 2.5 20 50
ESRR71202001006 0.1 2 4 2 6 45 ESRR71202501025 0.1 2.5 4 2.5 25 60
ESRR71202001008 0.1 2 4 2 8 45 ESRR71202501030 0.1 2.5 4 2.5 30 70
ESRR71202001010 0.1 2 4 2 10 50 ESRR71202502010 0.2 2.5 4 2.5 10 50
ESRR71202001012 0.1 2 4 2 12 50 ESRR71202502016 0.2 2.5 4 2.5 16 50
ESRR71202001014 0.1 2 4 2 14 50 ESRR71202502020 0.2 2.5 4 2.5 20 50
ESRR71202001016 0.1 2 4 2 16 50 ESRR71202503010 0.3 2.5 4 2.5 10 50
ESRR71202001020 0.1 2 4 2 20 50 ESRR71202503016 0.3 2.5 4 2.5 16 50
ESRR71202001025 0.1 2 4 2 25 60 ESRR71202503020 0.3 2.5 4 2.5 20 50
ESRR71202001030 0.1 2 4 2 30 70 ESRR71202505010 0.5 2.5 4 2.5 10 50
ESRR71202002006 0.2 2 4 2 6 45 ESRR71202505016 0.5 2.5 4 2.5 16 50
ESRR71202002008 0.2 2 4 2 8 45 ESRR71202505020 0.5 2.5 4 2.5 20 50
ESRR71202002010 0.2 2 4 2 10 50 ESRR71203001010 0.1 3 6 3 10 50
ESRR71202002012 0.2 2 4 2 12 50 ESRR71203001012 0.1 3 6 3 12 50
ESRR71202002014 0.2 2 4 2 14 50 ESRR71203001016 0.1 3 6 3 16 55
ESRR71202002016 0.2 2 4 2 16 50 ESRR71203001020 0.1 3 6 3 20 60
ESRR71202002020 0.2 2 4 2 20 50 ESRR71203001025 0.1 3 6 3 25 65
ESRR71202002025 0.2 2 4 2 25 60 ESRR71203001030 0.1 3 6 3 30 70
ESRR71202002030 0.2 2 4 2 30 70 ESRR71203001035 0.1 3 6 3 35 75
ESRR71202003006 0.3 2 4 2 6 45 ESRR71203001040 0.1 3 6 3 40 80
ESRR71202003008 0.3 2 4 2 8 45 ESRR71203002010 0.2 3 6 3 10 50
ESRR71202003010 0.3 2 4 2 10 50 ESRR71203002012 0.2 3 6 3 12 50
ESRR71202003012 0.3 2 4 2 12 50 ESRR71203002016 0.2 3 6 3 16 55
ESRR71202003014 0.3 2 4 2 14 50 ESRR71203002020 0.2 3 6 3 20 60
ESRR71202003016 0.3 2 4 2 16 50 ESRR71203002025 0.2 3 6 3 25 65
76 KORLOY
ESR
t50-&3"/$&
DATA ØD Ød
ULTRA 30 ~ Ø6
FINE
AlTiN 0 ~ -0.012mm
h5
HELIX Ø8 ~ Ø16 0 ~ -0.015mm
p.435~444
13°
R 2
(mm)
ESRR71203002030 0.2 3 6 3 30 70 ESRR71204002035 0.2 4 6 4 35 75

ESRR71203002035 0.2 3 6 3 35 75 ESRR71204002040 0.2 4 6 4 40 80
ESRR71203002040 0.2 3 6 3 40 80 ESRR71204003012 0.3 4 6 4 12 50
ESRR71203003010 0.3 3 6 3 10 50 ESRR71204003016 0.3 4 6 4 16 55
ESRR71203003012 0.3 3 6 3 12 50 ESRR71204003020 0.3 4 6 4 20 60
ESRR71203003016 0.3 3 6 3 16 55 ESRR71204003025 0.3 4 6 4 25 65
ESRR71203003020 0.3 3 6 3 20 60 ESRR71204003030 0.3 4 6 4 30 70
ESRR71203003025 0.3 3 6 3 25 65 ESRR71204003035 0.3 4 6 4 35 75
ESRR71203003030 0.3 3 6 3 30 70 ESRR71204003040 0.3 4 6 4 40 80
ESRR71203003035 0.3 3 6 3 35 75 ESRR71204005012 0.5 4 6 4 12 50
ESRR71203003040 0.3 3 6 3 40 80 ESRR71204005016 0.5 4 6 4 16 55
ESRR71203005010 0.5 3 6 3 10 50 ESRR71204005020 0.5 4 6 4 20 60
ESRR71203005012 0.5 3 6 3 12 50 ESRR71204005025 0.5 4 6 4 25 65
ESRR71203005016 0.5 3 6 3 16 55 ESRR71204005030 0.5 4 6 4 30 70
ESRR71203005020 0.5 3 6 3 20 60 ESRR71204005035 0.5 4 6 4 35 75
ESRR71203005025 0.5 3 6 3 25 65 ESRR71204005040 0.5 4 6 4 40 80
ESRR71203005030 0.5 3 6 3 30 70 ESRR71204010012 1 4 6 4 12 50
ESRR71203005035 0.5 3 6 3 35 75 ESRR71204010016 1 4 6 4 16 55
ESRR71203005040 0.5 3 6 3 40 80 ESRR71204010020 1 4 6 4 20 60
ESRR71203010010 1 3 6 3 10 50 ESRR71204010025 1 4 6 4 25 65
ESRR71203010012 1 3 6 3 12 50 ESRR71204010030 1 4 6 4 30 70
ESRR71203010016 1 3 6 3 16 55 ESRR71204010035 1 4 6 4 35 75
ESRR71203010020 1 3 6 3 20 60 ESRR71204010040 1 4 6 4 40 80
ESRR71203010025 1 3 6 3 25 65 ESRR71205002015 0.2 5 6 6 15 60
ESRR71203010030 1 3 6 3 30 70 ESRR71205002025 0.2 5 6 6 25 70
ESRR71203010035 1 3 6 3 35 75 ESRR71205002030 0.2 5 6 6 30 70
ESRR71203010040 1 3 6 3 40 80 ESRR71205002040 0.2 5 6 6 40 80
ESRR71204001012 0.1 4 6 4 12 50 ESRR71205005015 0.5 5 6 6 15 60
ESRR71204001016 0.1 4 6 4 16 55 ESRR71205005025 0.5 5 6 6 25 70
ESRR71204001020 0.1 4 6 4 20 60 ESRR71205005030 0.5 5 6 6 30 70
ESRR71204001025 0.1 4 6 4 25 65 ESRR71205005040 0.5 5 6 6 40 80
ESRR71204001030 0.1 4 6 4 30 70 ESRR71205010015 1 5 6 6 15 60
ESRR71204001035 0.1 4 6 4 35 75 ESRR71205010025 1 5 6 6 25 70
ESRR71204001040 0.1 4 6 4 40 80 ESRR71205010030 1 5 6 6 30 70
ESRR71204002012 0.2 4 6 4 12 50 ESRR71205010040 1 5 6 6 40 80
ESRR71204002016 0.2 4 6 4 16 55 ESRR71206001020 0.1 6 6 7 20 60
ESRR71204002020 0.2 4 6 4 20 60 ESRR71206001040 0.1 6 6 7 40 80
ESRR71204002025 0.2 4 6 4 25 65 ESRR71206002020 0.2 6 6 7 20 60
ESRR71204002030 0.2 4 6 4 30 70 ESRR71206002040 0.2 6 6 7 40 80
KORLOY
Y 77
Endmill
H-Star Endmill
ESR
t50-&3"/$&
DATA ØD Ød
ULTRA 30 ~ Ø6
FINE
AlTiN 0 ~ -0.012mm
h5
HELIX Ø8 ~ Ø16 0 ~ -0.015mm
p.435~444
13°
R 2
(mm)
ESRR71206003020 0.3 6 6 7 20 60 ESRR71210003024 0.3 10 10 11 24 70

ESRR71206003040 0.3 6 6 7 40 80 ESRR71210005024 0.5 10 10 11 24 70
ESRR71206005020 0.5 6 6 7 20 60 ESRR71210010024 1 10 10 11 24 70
ESRR71206005040 0.5 6 6 7 40 80 ESRR71210015024 1.5 10 10 11 24 70
ESRR71206010020 1 6 6 7 20 60 ESRR71210020024 2 10 10 11 24 70
ESRR71206010040 1 6 6 7 40 80 ESRR71212002026 0.2 12 12 13 26 80
ESRR71206015020 1.5 6 6 7 20 60 ESRR71212003026 0.3 12 12 13 26 80
ESRR71206015040 1.5 6 6 7 40 80 ESRR71212005026 0.5 12 12 13 26 80
ESRR71208002022 0.2 8 8 9 22 65 ESRR71212010026 1 12 12 13 26 80
ESRR71208003022 0.3 8 8 9 22 65 ESRR71212015026 1.5 12 12 13 26 80
ESRR71205005022 0.5 5 8 9 22 65 ESRR71212020026 2 12 12 13 26 80
ESRR71208010022 1 8 8 9 22 65 ESRR71212030026 3 12 12 13 26 80
ESRR71208015022 1.5 8 8 9 22 65 ESRR71216005035 0.5 16 16 20 35 110
ESRR71210002024 0.2 10 10 11 24 70 ESRR71216010035 1 16 16 20 35 110
○ ◎ ◎ ○
78 KORLOY
ESR
t50-&3"/$&
DATA ØD Ød
ULTRA 30 R R ~ Ø6
FINE
AlTiN 0 ~ -0.012mm
h5
HELIX ±0.01 ±0.015 Ø8 ~ Ø20 0 ~ -0.015mm
Ø6 or Under Above Ø6 p.445~456
13°
R 2
(mm)
ESRR71400500502 0.05 0.5 4 0.5 2 45 ESRR71400801008 0.1 0.8 4 0.8 8 45

ESRR71400500504 0.05 0.5 4 0.5 4 45 ESRR71400801010 0.1 0.8 4 0.8 10 45
ESRR71400500506 0.05 0.5 4 0.5 6 45 ESRR71400801012 0.1 0.8 4 0.8 12 50
ESRR71400500508 0.05 0.5 4 0.5 8 45 ESRR71401000204 0.02 1 4 1 4 45
ESRR71400501002 0.1 0.5 4 0.5 2 45 ESRR71401000206 0.02 1 4 1 6 45
ESRR71400501004 0.1 0.5 4 0.5 4 45 ESRR71401000208 0.02 1 4 1 8 45
ESRR71400501006 0.1 0.5 4 0.5 6 45 ESRR71401000210 0.02 1 4 1 10 50
ESRR71400501008 0.1 0.5 4 0.5 8 45 ESRR71401000212 0.02 1 4 1 12 50
ESRR71400600502 0.05 0.6 4 0.6 2 45 ESRR71401000214 0.02 1 4 1 14 50
ESRR71400600504 0.05 0.6 4 0.6 4 45 ESRR71401000216 0.02 1 4 1 16 50
ESRR71400600506 0.05 0.6 4 0.6 6 45 ESRR71401000220 0.02 1 4 1 20 50
ESRR71400600508 0.05 0.6 4 0.6 8 45 ESRR71401000503 0.05 1 4 1 3 45
ESRR71400601002 0.1 0.6 4 0.6 2 45 ESRR71401000504 0.05 1 4 1 4 45
ESRR71400601004 0.1 0.6 4 0.6 4 45 ESRR71401000506 0.05 1 4 1 6 45
ESRR71400601006 0.1 0.6 4 0.6 6 45 ESRR71401000508 0.05 1 4 1 8 45
ESRR71400601008 0.1 0.6 4 0.6 8 45 ESRR71401000510 0.05 1 4 1 10 50
ESRR71400700502 0.05 0.7 4 0.7 2 45 ESRR71401000512 0.05 1 4 1 12 50
ESRR71400700504 0.05 0.7 4 0.7 4 45 ESRR71401000514 0.05 1 4 1 14 50
ESRR71400700506 0.05 0.7 4 0.7 6 45 ESRR71401000516 0.05 1 4 1 16 50
ESRR71400700508 0.05 0.7 4 0.7 8 45 ESRR71401000520 0.05 1 4 1 20 50
ESRR71400701002 0.1 0.7 4 0.7 2 45 ESRR71401001003 0.1 1 4 1 3 45
ESRR71400701004 0.1 0.7 4 0.7 4 45 ESRR71401001004 0.1 1 4 1 4 45
ESRR71400701006 0.1 0.7 4 0.7 6 45 ESRR71401001006 0.1 1 4 1 6 45
ESRR71400701008 0.1 0.7 4 0.7 8 45 ESRR71401001008 0.1 1 4 1 8 45
ESRR71400800202 0.02 0.8 4 0.8 2 45 ESRR71401001010 0.1 1 4 1 10 50
ESRR71400800204 0.02 0.8 4 0.8 4 45 ESRR71401001012 0.1 1 4 1 12 50
ESRR71400800206 0.02 0.8 4 0.8 6 45 ESRR71401001014 0.1 1 4 1 14 50
ESRR71400800208 0.02 0.8 4 0.8 8 45 ESRR71401001016 0.1 1 4 1 16 50
ESRR71400800210 0.02 0.8 4 0.8 10 45 ESRR71401001020 0.1 1 4 1 20 50
ESRR71400800212 0.02 0.8 4 0.8 12 50 ESRR71401002003 0.2 1 4 1 3 45
ESRR71400800502 0.05 0.8 4 0.8 2 45 ESRR71401002004 0.2 1 4 1 4 45
ESRR71400800504 0.05 0.8 4 0.8 4 45 ESRR71401002006 0.2 1 4 1 6 45
ESRR71400800506 0.05 0.8 4 0.8 6 45 ESRR71401002008 0.2 1 4 1 8 45
ESRR71400800508 0.05 0.8 4 0.8 8 45 ESRR71401002010 0.2 1 4 1 10 50
ESRR71400800510 0.05 0.8 4 0.8 10 45 ESRR71401002012 0.2 1 4 1 12 50
ESRR71400800512 0.05 0.8 4 0.8 12 50 ESRR71401002014 0.2 1 4 1 14 50
ESRR71400801002 0.1 0.8 4 0.8 2 45 ESRR71401002016 0.2 1 4 1 16 50
ESRR71400801004 0.1 0.8 4 0.8 4 45 ESRR71401002020 0.2 1 4 1 20 50
ESRR71400801006 0.1 0.8 4 0.8 6 45 ESRR71401003003 0.3 1 4 1 3 45
KORLOY
Y 79
Endmill
H-Star Endmill
ESR
t50-&3"/$&
DATA ØD Ød
ULTRA 30 R R ~ Ø6
FINE
AlTiN 0 ~ -0.012mm
h5
HELIX ±0.01 ±0.015 Ø8 ~ Ø20 0 ~ -0.015mm
13°
R 2
(mm)
ESRR71401003004 0.3 1 4 1 4 45 ESRR71401202012 0.2 1.2 4 1.2 12 50

ESRR71401003006 0.3 1 4 1 6 45 ESRR71401202014 0.2 1.2 4 1.2 14 50
ESRR71401003008 0.3 1 4 1 8 45 ESRR71401202016 0.2 1.2 4 1.2 16 50
ESRR71401003010 0.3 1 4 1 10 50 ESRR71401202020 0.2 1.2 4 1.2 20 50
ESRR71401003012 0.3 1 4 1 12 50 ESRR71401203003 0.3 1.2 4 1.2 3 45
ESRR71401003014 0.3 1 4 1 14 50 ESRR71401203004 0.3 1.2 4 1.2 4 45
ESRR71401003016 0.3 1 4 1 16 50 ESRR71401203006 0.3 1.2 4 1.2 6 45
ESRR71401003020 0.3 1 4 1 20 50 ESRR71401203008 0.3 1.2 4 1.2 8 45
ESRR71401200204 0.02 1.2 4 1.2 4 45 ESRR71401203010 0.3 1.2 4 1.2 10 50
ESRR71401200206 0.02 1.2 4 1.2 6 45 ESRR71401203012 0.3 1.2 4 1.2 12 50
ESRR71401200208 0.02 1.2 4 1.2 8 45 ESRR71401203016 0.3 1.2 4 1.2 16 50
ESRR71401200210 0.02 1.2 4 1.2 10 50 ESRR71401203020 0.3 1.2 4 1.2 20 50
ESRR71401200212 0.02 1.2 4 1.2 12 50 ESRR71401500206 0.02 1.5 4 1.5 6 45
ESRR71401200214 0.02 1.2 4 1.2 14 50 ESRR71401500208 0.02 1.5 4 1.5 8 45
ESRR71401200216 0.02 1.2 4 1.2 16 50 ESRR71401500210 0.02 1.5 4 1.5 10 50
ESRR71401200220 0.02 1.2 4 1.2 20 50 ESRR71401500212 0.02 1.5 4 1.5 12 50
ESRR71401200503 0.05 1.2 4 1.2 3 45 ESRR71401500214 0.02 1.5 4 1.5 14 50
ESRR71401200504 0.05 1.2 4 1.2 4 45 ESRR71401500216 0.02 1.5 4 1.5 16 50
ESRR71401200506 0.05 1.2 4 1.2 6 45 ESRR71401500220 0.02 1.5 4 1.5 20 50
ESRR71401200508 0.05 1.2 4 1.2 8 45 ESRR71401500222 0.02 1.5 4 1.5 22 60
ESRR71401200510 0.05 1.2 4 1.2 10 50 ESRR71401500504 0.05 1.5 4 1.5 4 45
ESRR71401200512 0.05 1.2 4 1.2 12 50 ESRR71401500506 0.05 1.5 4 1.5 6 45
ESRR71401200514 0.05 1.2 4 1.2 14 50 ESRR71401500508 0.05 1.5 4 1.5 8 45
ESRR71401200516 0.05 1.2 4 1.2 16 50 ESRR71401500510 0.05 1.5 4 1.5 10 50
ESRR71401200520 0.05 1.2 4 1.2 20 50 ESRR71401500512 0.05 1.5 4 1.5 12 50
ESRR71401201003 0.1 1.2 4 1.2 3 45 ESRR71401500514 0.05 1.5 4 1.5 14 50
ESRR71401201004 0.1 1.2 4 1.2 4 45 ESRR71401500516 0.05 1.5 4 1.5 16 50
ESRR71401201006 0.1 1.2 4 1.2 6 45 ESRR71401500520 0.05 1.5 4 1.5 20 50
ESRR71401201008 0.1 1.2 4 1.2 8 45 ESRR71401500522 0.05 1.5 4 1.5 22 60
ESRR71401201010 0.1 1.2 4 1.2 10 50 ESRR71401500526 0.05 1.5 4 1.5 26 60
ESRR71401201012 0.1 1.2 4 1.2 12 50 ESRR71401501004 0.1 1.5 4 1.5 4 45
ESRR71401201014 0.1 1.2 4 1.2 14 50 ESRR71401501006 0.1 1.5 4 1.5 6 45
ESRR71401201016 0.1 1.2 4 1.2 16 50 ESRR71401501008 0.1 1.5 4 1.5 8 45
ESRR71401201020 0.1 1.2 4 1.2 20 50 ESRR71401501010 0.1 1.5 4 1.5 10 50
ESRR71401202003 0.2 1.2 4 1.2 3 45 ESRR71401501012 0.1 1.5 4 1.5 12 50
ESRR71401202004 0.2 1.2 4 1.2 4 45 ESRR71401501014 0.1 1.5 4 1.5 14 50
ESRR71401202006 0.2 1.2 4 1.2 6 45 ESRR71401501016 0.1 1.5 4 1.5 16 50
ESRR71401202008 0.2 1.2 4 1.2 8 45 ESRR71401501020 0.1 1.5 4 1.5 20 50
ESRR71401202010 0.2 1.2 4 1.2 10 50 ESRR71401501022 0.1 1.5 4 1.5 22 60
80 KORLOY
ESR
t50-&3"/$&
DATA ØD Ød
ULTRA 30 R R ~ Ø6
FINE
AlTiN 0 ~ -0.012mm
h5
HELIX ±0.01 ±0.015 Ø8 ~ Ø20 0 ~ -0.015mm
13°
R 2
(mm)
ESRR71401501026 0.1 1.5 4 1.5 26 60 ESRR71402000230 0.02 2 4 2 30 70

ESRR71401502004 0.2 1.5 4 1.5 4 45 ESRR71402000506 0.05 2 4 2 6 45
ESRR71401502006 0.2 1.5 4 1.5 6 45 ESRR71402000508 0.05 2 4 2 8 45
ESRR71401502008 0.2 1.5 4 1.5 8 45 ESRR71402000510 0.05 2 4 2 10 50
ESRR71401502010 0.2 1.5 4 1.5 10 50 ESRR71402000512 0.05 2 4 2 12 50
ESRR71401502012 0.2 1.5 4 1.5 12 50 ESRR71402000514 0.05 2 4 2 14 50
ESRR71401502014 0.2 1.5 4 1.5 14 50 ESRR71402000516 0.05 2 4 2 16 50
ESRR71401502016 0.2 1.5 4 1.5 16 50 ESRR71402000520 0.05 2 4 2 20 50
ESRR71401502020 0.2 1.5 4 1.5 20 50 ESRR71402000525 0.05 2 4 2 25 60
ESRR71401502022 0.2 1.5 4 1.5 22 60 ESRR71402000530 0.05 2 4 2 30 70
ESRR71401502025 0.2 1.5 4 1.5 25 60 ESRR71402001006 0.1 2 4 2 6 45
ESRR71401503004 0.3 1.5 4 1.5 4 45 ESRR71402001008 0.1 2 4 2 8 45
ESRR71401503006 0.3 1.5 4 1.5 6 45 ESRR71402001010 0.1 2 4 2 10 50
ESRR71401503008 0.3 1.5 4 1.5 8 45 ESRR71402001012 0.1 2 4 2 12 50
ESRR71401503010 0.3 1.5 4 1.5 10 50 ESRR71402001014 0.1 2 4 2 14 50
ESRR71401503012 0.3 1.5 4 1.5 12 50 ESRR71402001016 0.1 2 4 2 16 50
ESRR71401503014 0.3 1.5 4 1.5 14 50 ESRR71402001020 0.1 2 4 2 20 50
ESRR71401503016 0.3 1.5 4 1.5 16 50 ESRR71402001022 0.1 2 4 2 22 60
ESRR71401503020 0.3 1.5 4 1.5 20 50 ESRR71402001025 0.1 2 4 2 25 60
ESRR71401503022 0.3 1.5 4 1.5 22 60 ESRR71402001030 0.1 2 4 2 30 70
ESRR71401503025 0.3 1.5 4 1.5 25 60 ESRR71402002006 0.2 2 4 2 6 45
ESRR71401505004 0.5 1.5 4 1.5 4 45 ESRR71402002008 0.2 2 4 2 8 45
ESRR71401505006 0.5 1.5 4 1.5 6 45 ESRR71402002010 0.2 2 4 2 10 50
ESRR71401505008 0.5 1.5 4 1.5 8 45 ESRR71402002012 0.2 2 4 2 12 50
ESRR71401505010 0.5 1.5 4 1.5 10 50 ESRR71402002014 0.2 2 4 2 14 50
ESRR71401505012 0.5 1.5 4 1.5 12 50 ESRR71402002016 0.2 2 4 2 16 50
ESRR71401505014 0.5 1.5 4 1.5 14 50 ESRR71402002020 0.2 2 4 2 20 50
ESRR71401505016 0.5 1.5 4 1.5 16 50 ESRR71402002022 0.2 2 4 2 22 60
ESRR71401505020 0.5 1.5 4 1.5 20 50 ESRR71402002025 0.2 2 4 2 25 60
ESRR71401505022 0.5 1.5 4 1.5 22 60 ESRR71402002030 0.2 2 4 2 30 70
ESRR71401505025 0.5 1.5 4 1.5 25 60 ESRR71402003006 0.3 2 4 2 6 45
ESRR71402000206 0.02 2 4 2 6 45 ESRR71402003008 0.3 2 4 2 8 45
ESRR71402000208 0.02 2 4 2 8 45 ESRR71402003010 0.3 2 4 2 10 50
ESRR71402000210 0.02 2 4 2 10 50 ESRR71402003012 0.3 2 4 2 12 50
ESRR71402000212 0.02 2 4 2 12 50 ESRR71402003014 0.3 2 4 2 14 50
ESRR71402000214 0.02 2 4 2 14 50 ESRR71402003016 0.3 2 4 2 16 50
ESRR71402000216 0.02 2 4 2 16 50 ESRR71402003020 0.3 2 4 2 20 50
ESRR71402000220 0.02 2 4 2 20 50 ESRR71402003022 0.3 2 4 2 22 60
ESRR71402000225 0.02 2 4 2 25 60 ESRR71402003025 0.3 2 4 2 25 60
KORLOY
Y 81
Endmill
H-Star Endmill
ESR
t50-&3"/$&
DATA ØD Ød
ULTRA 30 R R ~ Ø6
FINE
AlTiN 0 ~ -0.012mm
h5
HELIX ±0.01 ±0.015 Ø8 ~ Ø20 0 ~ -0.015mm
13°
R 2
(mm)
ESRR71402003030 0.3 2 4 2 30 70 ESRR71402505016 0.5 2.5 4 2.5 16 50

ESRR71402005006 0.5 2 4 3 6 45 ESRR71402505020 0.5 2.5 4 2.5 20 50
ESRR71402005008 0.5 2 4 2 8 45 ESRR71402505025 0.5 2.5 4 2.5 25 60
ESRR71402005010 0.5 2 4 2 10 50 ESRR71402505030 0.5 2.5 4 2.5 30 70
ESRR71402005012 0.5 2 4 2 12 50 ESRR71403001008 0.1 3 6 3 8 45
ESRR71402005014 0.5 2 4 2 14 50 ESRR71403001010 0.1 3 6 3 10 50
ESRR71402005016 0.5 2 4 2 16 50 ESRR71403001012 0.1 3 6 3 12 50
ESRR71402005020 0.5 2 4 2 20 50 ESRR71403001014 0.1 3 6 3 14 50
ESRR71402005022 0.5 2 4 2 22 60 ESRR71403001016 0.1 3 6 3 16 55
ESRR71402005025 0.5 2 4 2 25 60 ESRR71403001020 0.1 3 6 3 20 60
ESRR71402005030 0.5 2 4 2 30 70 ESRR71403001025 0.1 3 6 3 25 65
ESRR71402501008 0.1 2.5 4 2.5 8 45 ESRR71403001030 0.1 3 6 3 30 70
ESRR71402501010 0.1 2.5 4 2.5 10 50 ESRR71403001035 0.1 3 6 3 35 75
ESRR71402501012 0.1 2.5 4 2.5 12 50 ESRR71403001040 0.1 3 6 3 40 80
ESRR71402501014 0.1 2.5 4 2.5 14 50 ESRR71403001045 0.1 3 6 3 45 90
ESRR71402501016 0.1 2.5 4 2.5 16 50 ESRR71403002008 0.2 3 6 3 8 45
ESRR71402501020 0.1 2.5 4 2.5 20 50 ESRR71403002010 0.2 3 6 3 10 50
ESRR71402501025 0.1 2.5 4 2.5 25 60 ESRR71403002012 0.2 3 6 3 12 50
ESRR71402501030 0.1 2.5 4 2.5 30 70 ESRR71403002014 0.2 3 6 3 14 50
ESRR71402502008 0.2 2.5 4 2.5 8 45 ESRR71403002016 0.2 3 6 3 16 55
ESRR71402502010 0.2 2.5 4 2.5 10 50 ESRR71403002020 0.2 3 6 3 20 60
ESRR71402502012 0.2 2.5 4 2.5 12 50 ESRR71403002025 0.2 3 6 3 25 65
ESRR71402502014 0.2 2.5 4 2.5 14 50 ESRR71403002030 0.2 3 6 3 30 70
ESRR71402502016 0.2 2.5 4 2.5 16 50 ESRR71403002035 0.2 3 6 3 35 75
ESRR71402502020 0.2 2.5 4 2.5 20 50 ESRR71403002040 0.2 3 6 3 40 80
ESRR71402502025 0.2 2.5 4 2.5 25 60 ESRR71403002045 0.2 3 6 3 45 90
ESRR71402502030 0.2 2.5 4 2.5 30 70 ESRR71403003008 0.3 3 6 3 8 45
ESRR71402503008 0.3 2.5 4 2.5 8 45 ESRR71403003010 0.3 3 6 3 10 50
ESRR71402503010 0.3 2.5 4 2.5 10 50 ESRR71403003012 0.3 3 6 3 12 50
ESRR71402503012 0.3 2.5 4 2.5 12 50 ESRR71403003014 0.3 3 6 3 14 50
ESRR71402503014 0.3 2.5 4 2.5 14 50 ESRR71403003016 0.3 3 6 3 16 55
ESRR71402503016 0.3 2.5 4 2.5 16 50 ESRR71403003020 0.3 3 6 3 20 60
ESRR71402503020 0.3 2.5 4 2.5 20 50 ESRR71403003025 0.3 3 6 3 25 65
ESRR71402503025 0.3 2.5 4 2.5 25 60 ESRR71403003030 0.3 3 6 3 30 70
ESRR71402503030 0.3 2.5 4 2.5 30 70 ESRR71403003035 0.3 3 6 3 35 75
ESRR71402505008 0.5 2.5 4 2.5 8 45 ESRR71403003040 0.3 3 6 3 40 80
ESRR71402505010 0.5 2.5 4 2.5 10 50 ESRR71403003045 0.3 3 6 3 45 90
ESRR71402505012 0.5 2.5 4 2.5 12 50 ESRR71403005008 0.5 3 6 3 8 45
ESRR71402505014 0.5 2.5 4 2.5 14 50 ESRR71403005010 0.5 3 6 3 10 50
82 KORLOY
ESR
t50-&3"/$&
DATA ØD Ød
ULTRA 30 R R ~ Ø6
FINE
AlTiN 0 ~ -0.012mm
h5
HELIX ±0.01 ±0.015 Ø8 ~ Ø20 0 ~ -0.015mm
13°
R 2
(mm)
ESRR71403005012 0.5 3 6 3 12 50 ESRR71404002030 0.2 4 6 4 30 70

ESRR71403005014 0.5 3 6 3 14 50 ESRR71404002035 0.2 4 6 4 35 75
ESRR71403005016 0.5 3 6 3 16 55 ESRR71404002040 0.2 4 6 4 40 80
ESRR71403005020 0.5 3 6 3 20 60 ESRR71404002045 0.2 4 6 4 45 90
ESRR71403005025 0.5 3 6 3 25 65 ESRR71404002050 0.2 4 6 4 50 100
ESRR71403005030 0.5 3 6 3 30 70 ESRR71404003010 0.3 4 6 4 10 50
ESRR71403005035 0.5 3 6 3 35 75 ESRR71404003012 0.3 4 6 4 12 50
ESRR71403005040 0.5 3 6 3 40 80 ESRR71404003013 0.3 4 6 4 13 55
ESRR71403005045 0.5 3 6 3 45 90 ESRR71404003016 0.3 4 6 4 16 55
ESRR71403005050 0.5 3 6 3 50 100 ESRR71404003020 0.3 4 6 4 20 60
ESRR71403010008 1 3 6 3 8 45 ESRR71404003025 0.3 4 6 4 25 65
ESRR71403010010 1 3 6 3 10 50 ESRR71404003030 0.3 4 6 4 30 70
ESRR71403010012 1 3 6 3 12 50 ESRR71404003035 0.3 4 6 4 35 75
ESRR71403010014 1 3 6 3 14 50 ESRR71404003040 0.3 4 6 4 40 80
ESRR71403010016 1 3 6 3 16 55 ESRR71404003045 0.3 4 6 4 45 90
ESRR71403010020 1 3 6 3 20 60 ESRR71404003050 0.3 4 6 4 50 100
ESRR71403010025 1 3 6 3 25 65 ESRR71404005010 0.5 4 6 4 10 50
ESRR71403010030 1 3 6 3 30 70 ESRR71404005012 0.5 4 6 4 12 50
ESRR71403010035 1 3 6 3 35 75 ESRR71404005013 0.5 4 6 4 13 55
ESRR71403010040 1 3 6 3 40 80 ESRR71404005016 0.5 4 6 4 16 55
ESRR71403010045 1 3 6 3 45 90 ESRR71404005020 0.5 4 6 4 20 60
ESRR71403010050 1 3 6 3 50 100 ESRR71404005025 0.5 4 6 4 25 65
ESRR71404001010 0.1 4 6 4 10 50 ESRR71404005030 0.5 4 6 4 30 70
ESRR71404001012 0.1 4 6 4 12 50 ESRR71404005035 0.5 4 6 4 35 75
ESRR71404001013 0.1 4 6 4 13 55 ESRR71404005040 0.5 4 6 4 40 80
ESRR71404001016 0.1 4 6 4 16 55 ESRR71404005045 0.5 4 6 4 45 90
ESRR71404001020 0.1 4 6 4 20 60 ESRR71404005050 0.5 4 6 4 50 100
ESRR71404001025 0.1 4 6 4 25 65 ESRR71404005055 0.5 4 6 4 55 100
ESRR71404001030 0.1 4 6 4 30 70 ESRR71404010010 1 4 6 4 10 50
ESRR71404001035 0.1 4 6 4 35 75 ESRR71404010012 1 4 6 4 12 50
ESRR71404001040 0.1 4 6 4 40 80 ESRR71404010013 1 4 6 4 13 55
ESRR71404001045 0.1 4 6 4 45 90 ESRR71404010016 1 4 6 4 16 55
ESRR71404001050 0.1 4 6 4 50 100 ESRR71404010020 1 4 6 4 20 60
ESRR71404002010 0.2 4 6 4 10 50 ESRR71404010025 1 4 6 4 25 65
ESRR71404002012 0.2 4 6 4 12 50 ESRR71404010030 1 4 6 4 30 70
ESRR71404002013 0.2 4 6 4 13 55 ESRR71404010035 1 4 6 4 35 75
ESRR71404002016 0.2 4 6 4 16 55 ESRR71404010040 1 4 6 4 40 80
ESRR71404002020 0.2 4 6 4 20 60 ESRR71404010045 1 4 6 4 45 90
ESRR71404002025 0.2 4 6 4 25 65 ESRR71404010050 1 4 6 4 50 100
KORLOY
Y 83
Endmill
H-Star Endmill
ESR
t50-&3"/$&
DATA ØD Ød
ULTRA 30 R R ~ Ø6
FINE
AlTiN 0 ~ -0.012mm
h5
HELIX ±0.01 ±0.015 Ø8 ~ Ø20 0 ~ -0.015mm
13°
R 2
(mm)
ESRR71404010055 1 4 6 4 55 100 ESRR71406010040 1 6 6 7 40 80

ESRR71405001016 0.1 5 6 5 16 60 ESRR71406010050 1 6 6 7 50 100
ESRR71405001030 0.1 5 6 5 30 70 ESRR71406010060 1 6 6 7 60 110
ESRR71405001040 0.1 5 6 5 40 80 ESRR71406015020 1.5 6 6 7 20 60
ESRR71405002016 0.2 5 6 5 16 60 ESRR71406015040 1.5 6 6 7 40 80
ESRR71405002030 0.2 5 6 5 30 70 ESRR71406015050 1.5 6 6 7 50 100
ESRR71405002040 0.2 5 6 5 40 80 ESRR71406020020 2 6 6 7 20 60
ESRR71405003016 0.3 5 6 5 16 60 ESRR71406020030 2 6 6 7 30 70
ESRR71405003030 0.3 5 6 5 30 70 ESRR71406020040 2 6 6 7 40 80
ESRR71405003040 0.3 5 6 5 40 80 ESRR71406020050 2 6 6 7 50 100
ESRR71405005016 0.5 5 6 5 16 60 ESRR71408001025 0.1 8 8 9 25 70
ESRR71405005030 0.5 5 6 5 30 70 ESRR71408002022 0.2 8 8 9 22 65
ESRR71405005040 0.5 5 6 5 40 80 ESRR71408002040 0.2 8 8 9 40 100
ESRR71405005050 0.5 5 6 5 50 100 ESRR71408003022 0.3 8 8 9 22 65
ESRR71405005060 0.5 5 6 5 60 110 ESRR71408003040 0.3 8 8 9 40 100
ESRR71405010016 1 5 6 5 16 60 ESRR71408005022 0.5 8 8 9 22 65
ESRR71405010030 1 5 6 5 30 70 ESRR71408005035 0.5 8 8 9 35 100
ESRR71405010040 1 5 6 5 40 80 ESRR71408005040 0.5 8 8 9 40 100
ESRR71405010050 1 5 6 5 50 100 ESRR71408005050 0.5 8 8 9 50 120
ESRR71405010060 1 5 6 5 60 110 ESRR71408005060 0.5 8 8 9 60 120
ESRR71405015015 1.5 5 6 5 15 60 ESRR71408010022 1 8 8 9 22 65
ESRR71405020015 2 5 6 5 15 60 ESRR71408010035 1 8 8 9 35 100
ESRR71406001020 0.1 6 6 7 20 60 ESRR71408010040 1 8 8 9 40 100
ESRR71406001040 0.1 6 6 7 40 80 ESRR71408010050 1 8 8 9 50 120
ESRR71406001050 0.1 6 6 7 50 100 ESRR71408010060 1 8 8 9 60 120
ESRR71406002020 0.2 6 6 7 20 60 ESRR71408015022 1.5 8 8 9 22 65
ESRR71406002040 0.2 6 6 7 40 80 ESRR71408015040 1.5 8 8 9 40 100
ESRR71406002050 0.2 6 6 7 50 100 ESRR71408020022 2 8 8 9 22 65
ESRR71406003020 0.3 6 6 7 20 60 ESRR71408020040 2 8 8 9 40 100
ESRR71406003030 0.3 6 6 7 30 70 ESRR71408020050 2 8 8 9 50 120
ESRR71406003040 0.3 6 6 7 40 80 ESRR71410001030 0.1 10 10 11 30 75
ESRR71406003050 0.3 6 6 7 50 100 ESRR71410002024 0.2 10 10 11 24 70
ESRR71406005020 0.5 6 6 7 20 60 ESRR71410002040 0.2 10 10 11 40 100
ESRR71406005030 0.5 6 6 7 30 70 ESRR71410003024 0.3 10 10 11 24 70
ESRR71406005040 0.5 6 6 7 40 80 ESRR71410003040 0.3 10 10 11 40 100
ESRR71406005050 0.5 6 6 7 50 100 ESRR71410005024 0.5 10 10 11 24 70
ESRR71406005060 0.5 6 6 7 60 110 ESRR71410005040 0.5 10 10 11 40 100
ESRR71406010020 1 6 6 7 20 60 ESRR71410005050 0.5 10 10 11 50 120
ESRR71406010030 1 6 6 7 30 70 ESRR71410005060 0.5 10 10 11 60 120
84 KORLOY
ESR
t50-&3"/$&
DATA ØD Ød
ULTRA 30 R R ~ Ø6
FINE
AlTiN 0 ~ -0.012mm
h5
HELIX ±0.01 ±0.015 Ø8 ~ Ø20 0 ~ -0.015mm
13°
R 2
(mm)
ESRR71410010024 1 10 10 11 24 70 ESRR71412010026 1 12 12 13 26 80
ESRR71410010040 1 10 10 11 40 100 ESRR71412010040 1 12 12 13 40 110
ESRR71410010050 1 10 10 11 50 120 ESRR71412010060 1 12 12 13 60 130
ESRR71410010060 1 10 10 11 60 120 ESRR71412015026 1.5 12 12 13 26 80
ESRR71410015024 1.5 10 10 11 24 70 ESRR71412020026 2 12 12 13 26 80
ESRR71410015040 1.5 10 10 11 40 100 ESRR71412020040 2 12 12 13 40 110
ESRR71410020024 2 10 10 11 24 70 ESRR71412030026 3 12 12 13 26 80
ESRR71410020040 2 10 10 11 40 100 ESRR71416005035 0.5 16 16 20 35 100
ESRR71410020050 2 10 10 11 50 120 ESRR71416005050 0.5 16 20 35 50 150
ESRR71410025024 2.5 10 10 11 24 70 ESRR71416010035 1 16 16 20 35 100
ESRR71412002032 0.2 12 12 13 32 80 ESRR71416010050 1 16 20 35 50 150
ESRR71412003026 0.3 12 12 13 26 80 ESRR71420005040 0.5 20 20 25 40 100
ESRR71412003045 0.3 12 12 13 45 110 ESRR71420005055 0.5 20 20 40 55 150
ESRR71412005026 0.5 12 12 13 26 80 ESRR71420010040 1 20 20 25 40 100
ESRR71412005040 0.5 12 12 13 40 110 ESRR71420010055 1 20 20 40 55 150
ESRR71412005060 0.5 12 12 13 60 130
○ ◎ ◎ ○
KORLOY
Y 85
Endmill
H-Star Endmill
ESXE704
E704 4 Flutes neck type flat endmill
t50-&3"/$&
DATA ØD Ød
ULTRA M AlTiN
FINE HELIX
All sizes 0 ~ -0.02mm h5
p.457
13°
(mm)
ESXE704010 1 4 1.5 4 45
ESXE704020 2 4 3 6 45
ESXE704030 3 6 4 7 45
ESXE704040 4 6 5 9 45
ESXE704060 6 6 7 14 50
ESXE704080 8 8 9 18 60
ESXE704100 10 10 12 25 75
ESXE704120 12 12 15 30 75
○ ◎ ◎ ○
86 KORLOY
ESX
SXE714 t50-&3"/$&
DATA ØD Ød
ULTRA M AlTiN
FINE HELIX
p.457
(mm)
ESXE714020 2 4 5 45
ESXE714030 3 6 8 45
ESXE714040 4 6 10 45
ESXE714040S4 4 4 10 45
ESXE714060 6 6 16 50
ESXE714080 8 8 20 60
ESXE714100 10 10 25 75
ESXE714120 12 12 35 85
○ ◎ ◎ ○
KORLOY
Y 87
Endmill
H-Star Endmill
ESX
SXR704 4 Flutes neck type radius endmill
t50-&3"/$&
DATA ØD Ød
ULTRA M R R AlTiN
FINE HELIX ±0.01 ±0.015 All sizes 0 ~ -0.02mm h5
13°
2
R
(mm)
ESXR70401000504 0.05 1 4 1.5 4 45 ESXR7040600220 0.2 6 6 7 20 60

ESXR70402000506 0.05 2 4 3 6 45 ESXR7040600320 0.3 6 6 7 20 60
ESXR70402000507 0.05 2 4 2.5 7 50 ESXR7040600520 0.5 6 6 7 20 60
ESXR7040200107 0.1 2 4 2.5 7 50 ESXR7040601020 1 6 6 7 20 60
ESXR7040300107 0.1 3 6 4 7 45 ESXR7040601520 1.5 6 6 7 20 60
ESXR7040300109 0.1 3 6 4 9 55 ESXR7040800125 0.1 8 8 9 25 60
ESXR7040300209 0.2 3 6 4 9 55 ESXR7040800218 0.2 8 8 9 18 60
ESXR7040300309 0.3 3 6 4 9 55 ESXR7040800225 0.2 8 8 9 25 60
ESXR7040300312 0.3 3 6 4 12 55 ESXR7040800325 0.3 8 8 9 25 60
ESXR7040300316 0.3 3 6 4 16 55 ESXR7040800525 0.5 8 8 9 25 60
ESXR7040400109 0.1 4 6 5 9 45 ESXR7040801025 1 8 8 9 25 60
ESXR7040400212 0.2 4 6 5 12 55 ESXR7040801525 1.5 8 8 9 25 60
ESXR7040400212S4 0.2 4 4 5 12 55 ESXR7040802025 2 8 8 9 25 60
ESXR7040400312 0.3 4 6 5 12 55 ESXR7041000225 0.2 10 10 12 25 75
ESXR7040400316 0.3 4 6 5 16 55 ESXR7041000232 0.2 10 10 11 32 75
ESXR7040400320 0.3 4 6 5 20 55 ESXR7041000332 0.3 10 10 11 32 75
ESXR7040400512 0.5 4 6 5 12 55 ESXR7041000532 0.5 10 10 11 32 75
ESXR7040400516 0.5 4 6 5 16 55 ESXR7041001032 1 10 10 11 32 75
ESXR7040400516S4 0.5 4 4 5 16 55 ESXR7041001532 1.5 10 10 11 32 75
ESXR7040400520 0.5 4 6 5 20 55 ESXR7041002032 2 10 10 11 32 75
ESXR7040401012 1 4 6 5 12 55 ESXR7041200238 0.2 12 12 12 38 75
ESXR7040500116 0.1 5 6 6 16 60 ESXR7041200330 0.3 12 12 15 30 75
ESXR7040500216 0.2 5 6 6 16 60 ESXR7041200338 0.3 12 12 12 38 75
ESXR7040500316 0.3 5 6 6 16 60 ESXR7041200538 0.5 12 12 12 38 75
ESXR7040500516 0.5 5 6 6 16 60 ESXR7041201038 1 12 12 12 38 75
ESXR7040501016 1 5 6 6 16 60 ESXR7041201538 1.5 12 12 12 38 75
ESXR7040600120 0.1 6 6 7 20 60 ESXR7041202038 2 12 12 12 38 75
ESXR7040600214 0.2 6 6 7 14 50
○ ◎ ◎ ○
88 KORLOY
ESL
SLNB20 2 Flutes long neck type ball endmill
t50-&3"/$&
ØD Ød
ULTRA 30 R AlTiN
DATA
FINE HELIX ±0.005 All sizes 0 ~ -0.012mm h5
Above Ø6 p.457
3 θ
1
R 2
(mm)
Sizes(mm) Effective length by inclination angle

Designation
R ØD Ød ℓ1 ℓ2 D3 ѡ L 0.5° 1° 1.5° 2° 3°
ESLNB2001-0.2 0.05 0.1 4 0.08 0.2 0.08 11.8 45 0.3 0.3 0.3 0.4 0.4
ESLNB2001-0.3 0.05 0.1 4 0.08 0.3 0.08 11.7 45 0.4 0.4 0.5 0.5 0.5
ESLNB2001-0.5 0.05 0.1 4 0.08 0.5 0.08 11.4 45 0.6 0.7 0.7 0.7 0.8
ESLNB2002-0.5 0.1 0.2 4 0.15 0.5 0.17 11.5 50 1.2 1.3 1.5 1.6 2
ESLNB2002-1 0.1 0.2 4 0.15 1 0.17 10.9 50 1.7 1.9 2.1 2.3 2.7
ESLNB2002-1.5 0.1 0.2 4 0.15 1.5 0.17 10.4 50 2.3 2.5 2.8 3 3.4
ESLNB2002-2 0.1 0.2 4 0.15 2 0.17 9.9 50 2.8 3.1 3.4 3.6 4.1
ESLNB2002-2.5 0.1 0.2 4 0.15 2.5 0.17 9.5 50 3.4 3.7 4 4.2 4.7
ESLNB2002-3.0 0.1 0.2 4 0.15 3 0.17 9.1 50 3.9 4.3 4.6 4.9 5.4
ESLNB2003-1 0.15 0.3 4 0.25 1 0.27 10.9 50 1.7 1.9 2.1 2.3 2.7
ESLNB2003-1.5 0.15 0.3 4 0.25 1.5 0.27 10.4 50 2.3 2.5 2.7 3 3.4
ESLNB2003-2 0.15 0.3 4 0.25 2 0.27 9.9 50 2.8 3.1 3.4 3.6 4
ESLNB2003-2.5 0.15 0.3 4 0.25 2.5 0.27 9.5 50 3.4 3.7 4 4.2 4.7
ESLNB2003-3 0.15 0.3 4 0.25 3 0.27 9.1 50 3.9 4.3 4.6 4.8 5.3
ESLNB2004-1 0.2 0.4 4 0.3 1 0.37 11 50 1.7 1.9 2.1 2.3 2.7
ESLNB2004-1.5 0.2 0.4 4 0.3 1.5 0.37 10.4 50 2.3 2.5 2.7 2.9 3.4
ESLNB2004-2 0.2 0.4 4 0.3 2 0.37 9.9 50 2.8 3.1 3.4 3.6 4
ESLNB2004-2.5 0.2 0.4 4 0.3 2.5 0.37 9.5 50 3.4 3.7 4 4.2 4.7
ESLNB2004-3 0.2 0.4 4 0.3 3 0.37 9.1 50 3.9 4.3 4.6 4.8 5.3
ESLNB2004-3.5 0.2 0.4 4 0.3 3.5 0.37 8.7 50 4.5 4.8 5.2 5.4 6
ESLNB2004-4 0.2 0.4 4 0.3 4 0.37 8.3 50 5 5.4 5.7 6 6.6
ESLNB2004-4.5 0.2 0.4 4 0.3 4.5 0.37 8 50 5.6 6 6.3 6.6 7.2
ESLNB2005-1 0.25 0.5 4 0.35 1 0.47 11 50 1.7 1.9 2.1 2.3 2.6
ESLNB2005-2 0.25 0.5 4 0.35 2 0.47 9.9 50 2.8 3.1 3.3 3.6 4
ESLNB2005-3 0.25 0.5 4 0.35 3 0.47 9 50 3.9 4.3 4.6 4.8 5.3
ESLNB2005-4 0.25 0.5 4 0.35 4 0.47 8.3 50 5 5.4 5.7 6 6.6
ESLNB2005-5 0.25 0.5 4 0.35 5 0.47 7.7 50 6.1 6.5 6.9 7.2 7.8
ESLNB2005-6 0.25 0.5 4 0.35 6 0.47 7.1 50 7.2 7.6 8 8.4 9
ESLNB2005-8 0.25 0.5 4 0.35 8 0.47 6.3 50 9.3 9.9 10.3 10.7 11.4
ESLNB2006-1 0.3 0.6 4 0.4 1 0.57 11 50 1.7 1.9 2.1 2.3 2.6
ESLNB2006-2 0.3 0.6 4 0.4 2 0.57 9.9 50 2.8 3.1 3.3 3.6 4
ESLNB2006-3 0.3 0.6 4 0.4 3 0.57 9 50 3.9 4.3 4.5 4.8 5.3
ESLNB2006-4 0.3 0.6 4 0.4 4 0.57 8.3 50 5 5.4 5.7 6 6.6
ESLNB2006-5 0.3 0.6 4 0.4 5 0.57 7.6 50 6.1 6.5 6.9 7.2 7.8
ESLNB2006-6 0.3 0.6 4 0.4 6 0.57 7.1 50 7.2 7.6 8 8.4 9
ESLNB2006-7 0.3 0.6 4 0.4 7 0.57 6.6 50 8.3 8.8 9.2 9.5 10.2
KORLOY
Y 89
Endmill
H-Star Endmill
ESL
t50-&3"/$&
ØD Ød
ULTRA 30 R AlTiN
DATA
Above Ø6 p.457
3 θ
1
R 2
(mm)

Designation
R ØD Ød ℓ1 ℓ2 D3 ѡ L 0.5° 1° 1.5° 2° 3°
0.3 0.6 4 0.4 8 0.57 6.2 50 9.3 9.9 10.3 10.7 11.4
ESLNB2006-9 0.3 0.6 4 0.4 9 0.57 5.8 50 10.4 10.9 11.4 11.8 12.5
ESLNB2006-10 0.3 0.6 4 0.4 10 0.57 5.5 50 11.4 12 12.5 12.9 13.7
ESLNB2006-12 0.3 0.6 4 0.4 12 0.57 5 50 13.6 14.2 14.7 15.2 16
ESLNB2008-2 0.4 0.8 4 0.5 2 0.77 9.9 50 2.8 3.1 3.3 3.5 4
ESLNB2008-4 0.4 0.8 4 0.5 4 0.77 8.2 50 5 5.4 5.7 6 6.5
ESLNB2008-5 0.4 0.8 4 0.5 5 0.77 7.5 50 6.1 6.5 6.9 7.2 7.8
ESLNB2008-6 0.4 0.8 4 0.5 6 0.77 7 50 7.2 7.6 8 8.4 9
ESLNB2008-8 0.4 0.8 4 0.5 8 0.77 6.1 50 9.3 9.8 10.3 10.7 11.3
ESLNB2008-10 0.4 0.8 4 0.5 10 0.77 5.4 50 11.4 12 12.5 12.9 13.7
ESLNB2010-2 0.5 1 4 0.8 2 0.96 9.9 50 2.9 3.1 3.3 3.5 4
ESLNB2010-3 0.5 1 4 0.8 3 0.96 8.9 50 4 4.3 4.5 4.8 5.3
ESLNB2010-4 0.5 1 4 0.8 4 0.96 8.1 50 5 5.4 5.7 6 6.5
ESLNB2010-5 0.5 1 4 0.8 5 0.96 7.4 50 6.1 6.5 6.9 7.2 7.8
ESLNB2010-6 0.5 1 4 0.8 6 0.96 6.8 50 7.2 7.7 8 8.4 9
ESLNB2010-7 0.5 1 4 0.8 7 0.96 6.3 50 8.3 8.8 9.2 9.5 10.2
ESLNB2010-8 0.5 1 4 0.8 8 0.96 5.9 50 9.3 9.9 10.3 10.7 11.3
ESLNB2010-9 0.5 1 4 0.8 9 0.96 5.5 50 10.4 11 11.4 11.8 12.5
ESLNB2010-10 0.5 1 4 0.8 10 0.96 5.2 50 11.5 12 12.5 12.9 13.7
ESLNB2010-12 0.5 1 4 0.8 12 0.96 4.6 55 13.6 14.2 14.7 15.2 15.9
ESLNB2010-14 0.5 1 4 0.8 14 0.96 4.2 55 15.7 16.4 16.9 17.4 18.5
ESLNB2010-16 0.5 1 4 0.8 16 0.96 3.8 55 17.8 18.5 19.1 19.6 21.2
ESLNB2010-18 0.5 1 4 0.8 18 0.96 3.5 60 19.9 20.7 21.3 21.8 23.8
ESLNB2010-20 0.5 1 4 0.8 20 0.96 3.3 60 22 22.8 23.4 24 26.5
ESLNB2012-4 0.6 1.2 4 1.1 4 1.15 7.9 50 5.1 5.4 5.7 6 6.5
ESLNB2012-6 0.6 1.2 4 1.1 6 1.15 6.6 50 7.2 7.7 8 8.4 9
ESLNB2012-8 0.6 1.2 4 1.1 8 1.15 5.7 50 9.4 9.9 10.3 10.7 11.3
ESLNB2012-10 0.6 1.2 4 1.1 10 1.15 5 50 11.5 12.1 12.5 12.9 13.7
ESLNB2012-12 0.6 1.2 4 1.1 12 1.15 4.5 55 13.6 14.2 14.7 15.2 15.9
ESLNB2014-8 0.7 1.4 4 1.3 8 1.34 5.5 50 9.4 9.9 10.3 10.7 11.3
ESLNB2014-12 0.7 1.4 4 1.3 12 1.34 4.3 55 13.6 14.2 14.7 15.2 15.9
ESLNB2014-16 0.7 1.4 4 1.3 16 1.34 3.5 55 17.8 18.5 19.1 19.6 21.2
ESLNB2015-4 0.75 1.5 4 1.35 4 1.44 7.7 50 5.1 5.4 5.7 6 6.5
ESLNB2015-6 0.75 1.5 4 1.35 6 1.44 6.4 50 7.3 7.7 8 8.4 9
ESLNB2015-8 0.75 1.5 4 1.35 8 1.44 5.4 50 9.4 9.9 10.3 10.7 11.3
ESLNB2015-10 0.75 1.5 4 1.35 10 1.44 4.7 50 11.5 12.1 12.5 12.9 13.7
90 KORLOY
ESL
t50-&3"/$&
ØD Ød
ULTRA 30 R AlTiN
DATA
Above Ø6 p.457
3 θ
1
R 2
(mm)

Designation
R ØD Ød ℓ1 ℓ2 D3 ѡ L 0.5° 1° 1.5° 2° 3°
ESLNB2015-12 0.75 1.5 4 1.35 12 1.44 4.2 55 13.6 14.2 14.7 15.2 15.9
ESLNB2015-14 0.75 1.5 4 1.35 14 1.44 3.8 55 15.7 16.4 16.9 17.4 18.5
ESLNB2015-16 0.75 1.5 4 1.35 16 1.44 3.4 55 17.8 18.5 19.1 19.6 21.1
ESLNB2015-20 0.75 1.5 4 1.35 20 1.44 2.9 60 22 22.8 23.4 24 -
ESLNB2016-8 0.8 1.6 4 1.4 8 1.54 5.3 50 9.4 9.9 10.3 10.7 11.3
ESLNB2016-10 0.8 1.6 4 1.4 10 1.54 4.6 55 11.5 12.1 12.5 12.9 13.7
ESLNB2016-12 0.8 1.6 4 1.4 12 1.54 4.1 55 13.6 14.2 14.7 15.2 15.9
ESLNB2016-16 0.8 1.6 4 1.4 16 1.54 3.3 55 17.8 18.5 19.1 19.6 21.1
ESLNB2016-20 0.8 1.6 4 1.4 20 1.54 2.8 60 22 22.8 23.4 24 -
ESLNB2018-8 0.9 1.8 4 1.6 8 1.73 5.1 50 9.4 9.9 10.3 10.7 11.3
ESLNB2018-12 0.9 1.8 4 1.6 12 1.73 3.9 55 13.7 14.3 14.7 15.2 15.9
ESLNB2018-16 0.9 1.8 4 1.6 16 1.73 3.1 55 17.9 18.6 19.1 19.6 21.1
ESLNB2018-20 0.9 1.8 4 1.6 20 1.73 2.6 60 22 22.8 23.4 24 -
ESLNB2020-3 1 2 4 1.7 3 1.92 8.3 50 4.1 4.4 4.6 4.8 5.2
ESLNB2020-4 1 2 4 3 4 1.92 7.3 50 5.2 5.5 5.8 6 6.5
ESLNB2020-6 1 2 4 3 6 1.92 5.8 50 7.3 7.7 8.1 8.4 9
ESLNB2020-8 1 2 4 3 8 1.92 4.9 50 9.5 9.9 10.3 10.7 11.3
ESLNB2020-10 1 2 4 3 10 1.92 4.2 50 11.6 12.1 12.6 12.9 13.6
ESLNB2020-12 1 2 4 3 12 1.92 3.7 55 13.7 14.3 14.8 15.2 15.9
ESLNB2020-14 1 2 4 3 14 1.92 3.2 55 15.8 16.4 16.9 17.4 18.5
ESLNB2020-16 1 2 4 3 16 1.92 2.9 55 17.9 18.6 19.1 19.6 -
ESLNB2020-18 1 2 4 3 18 1.92 2.7 60 20 20.7 21.3 21.8 -
ESLNB2020-20 1 2 4 3 20 1.92 2.4 60 22.1 22.8 23.4 24 -
ESLNB2020-22 1 2 4 3 22 1.92 2.3 60 24.1 24.9 25.6 26.3 -
ESLNB2020-25 1 2 4 3 25 1.92 2 65 27.3 28.1 28.8 - -
ESLNB2020-30 1 2 4 3 30 1.92 1.7 70 32.4 33.4 34.2 - -
ESLNB2020-35 1 2 4 3 35 1.92 1.5 75 37.6 38.6 - - -
ESLNB2020-40 1 2 4 3 40 1.92 1.4 80 42.8 43.8 - - -
ESLNB2025-10 1.25 2.5 4 4 10 2.4 3.4 50 11.6 12.1 12.6 13 13.6
ESLNB2025-16 1.25 2.5 4 4 16 2.4 2.3 55 17.9 18.6 19.1 19.6 -
ESLNB2025-20 1.25 2.5 4 4 20 2.4 1.9 60 22.1 22.8 23.5 - -
ESLNB2030-8 1.5 3 6 4 8 2.88 6.2 55 9.6 10 10.4 10.7 11.3
ESLNB2030-10 1.5 3 6 4 10 2.88 5.5 55 11.7 12.2 12.6 13 13.6
ESLNB2030-13 1.5 3 6 4 13 2.88 4.6 60 14.8 15.4 15.9 16.3 17.1
ESLNB2030-16 1.5 3 6 4 16 2.88 4 60 18 18.6 19.1 19.6 21.1
ESLNB2030-18 1.5 3 6 4 18 2.88 3.6 60 20 20.7 21.3 21.8 23.7
KORLOY
Y 91
Endmill
H-Star Endmill
ESL
t50-&3"/$&
ØD Ød
ULTRA 30 R AlTiN
DATA
Above Ø6 p.457
3 θ
1
R 2
(mm)

Designation
R ØD Ød ℓ1 ℓ2 D3 ѡ L 0.5° 1° 1.5° 2° 3°
ESLNB2030-20 1.5 3 6 4 20 2.88 3.4 65 22.1 22.9 23.5 24 26.4
ESLNB2030-25 1.5 3 6 4 25 2.88 2.8 70 27.3 28.2 28.8 29.9 -
ESLNB2030-30 1.5 3 6 4 30 2.88 2.5 75 32.5 33.4 34.3 35.9 -
ESLNB2030-35 1.5 3 6 4 35 2.88 2.2 80 37.7 38.7 40 41.9 -
ESLNB2040-10 2 4 6 5 10 3.9 4.5 55 11.6 12.1 12.5 12.9 13.5
ESLNB2040-13 2 4 6 5 13 3.9 3.6 60 14.7 15.3 15.8 16.2 17
ESLNB2040-16 2 4 6 5 16 3.9 3.1 60 17.9 18.5 19.1 19.5 20.9
ESLNB2040-20 2 4 6 5 20 3.9 2.5 65 22.1 22.8 23.4 23.9 -
ESLNB2040-25 2 4 6 5 25 3.9 2.1 70 27.3 28.1 28.8 29.8 -
ESLNB2040-30 2 4 6 5 30 3.9 1.8 75 32.4 33.4 34.2 - -
ESLNB2040-35 2 4 6 5 35 3.9 1.6 80 37.6 38.6 39.9 - -
ESLNB2040-40 2 4 6 5 40 3.9 1.4 80 42.8 43.8 - - -
ESLNB2040-45 2 4 6 5 45 3.9 1.2 90 47.9 49.1 - - -
ESLNB2040-50 2 4 6 5 50 3.9 1.1 100 53.1 54.5 - - -
ESLNB2050-20 2.5 5 6 6 20 4.9 1.4 65 22 22.8 - - -
ESLNB2050-25 2.5 5 6 6 25 4.9 1.2 70 27.2 28.1 - - -
ESLNB2050-30 2.5 5 6 6 30 4.9 1 75 32.4 - - - -
ESLNB2050-35 2.5 5 6 6 35 4.9 0.8 80 42.8 - - - -
ESLNB2050-40 2.5 5 6 6 40 4.9 0.7 90 42.8 - - - -
Effective neck L2
length
Rake ang
gle
Interference ٘The marked effective neck length is the default value to prevent
angle interference with the workpiece.
Proper control of the processing environment is required.
○ ◎ ◎ ○
92 KORLOY
EST
STNB20 2 Flutes tapered neck type ball endmill
t50-&3"/$&
DATA ØD Ød
ULTRA 30 R R ~ Ø6
FINE
AlTiN 0 ~ -0.012mm
h5
HELIX ±0.01 ±0.015 Ø8 ~ Ø12 0 ~ -0.015mm
3 4
θ2 θ
1 (B.T:3~5°)
R App.L
2
R2 and below are not back draft type

(mm)

Designation
R ØD Ød ℓ1 ℓ2 ѡ D3 D4 App. L ѡ2 L 0.5° 1° 1.5° 2° 3°
ESTNB2002-1-04 0.1 0.2 4 0.15 1 0.4 0.17 0.18 1.35 10.9 50 1.5 1.7 1.8 2 2.3
ESTNB2002-1.5-04 0.1 0.2 4 0.15 1.5 0.4 0.17 0.19 1.77 10.4 50 2 2.2 2.4 2.6 2.9
ESTNB2002-2-09 0.1 0.2 4 0.15 2 0.9 0.17 0.23 1.1 10.1 50 - 2.8 3.1 3.4 3.9
ESTNB2002-2.5-09 0.1 0.2 4 0.15 2.5 0.9 0.17 0.24 1.1 9.6 50 - 3.3 3.7 4 4.5
ESTNB2003-2-04 0.15 0.3 4 0.25 2 0.4 0.28 0.29 2.19 10 50 2.5 2.8 3 3.2 3.5
ESTNB2003-3-09 0.15 0.3 4 0.25 3 0.9 0.28 0.36 1.2 9.3 50 - 3.8 4.2 4.5 5.1
ESTNB2003-4-09 0.15 0.3 4 0.25 4 0.9 0.28 0.39 1.2 8.6 50 - 4.8 5.3 5.7 6.3
ESTNB2004-2-04 0.2 0.4 4 0.3 2 0.4 0.37 0.39 2.2 10 50 2.5 2.8 3 3.2 3.5
ESTNB2004-3-04 0.2 0.4 4 0.3 3 0.4 0.37 0.41 2.44 9.1 50 3.6 3.9 4.1 4.4 4.8
ESTNB2004-4-04 0.2 0.4 4 0.3 4 0.4 0.37 0.42 2.44 8.4 50 4.7 5.2 5.6 5.9 6.5
ESTNB2004-4-09 0.2 0.4 4 0.3 4 0.9 0.37 0.49 1.25 8.5 50 - 4.8 5.3 5.7 6.3
ESTNB2004-5-04 0.2 0.4 4 0.3 5 0.4 0.37 0.44 2.44 7.8 50 5.7 6.3 6.7 7.1 7.7
ESTNB2004-5-09 0.2 0.4 4 0.3 5 0.9 0.37 0.52 1.25 7.9 50 - 5.9 6.4 6.8 7.5
ESTNB2005-4-04 0.25 0.5 4 0.35 4 0.4 0.47 0.52 2.49 8.4 50 4.6 5 5.3 5.5 5.9
ESTNB2005-8-09 0.25 0.5 4 0.35 8 0.9 0.47 0.71 1.3 6.5 50 - 8.9 9.6 10.1 10.9
ESTNB2005-12-09 0.25 0.5 4 0.35 12 0.9 0.47 0.84 1.3 5.3 50 - 13 13.9 14.5 15.4
ESTNB20054-2-04 0.27 0.54 4 0.37 2 0.4 0.52 0.54 1.8 10 50 2.3 2.5 2.7 2.8 3
ESTNB20054-4-04 0.27 0.54 4 0.37 4 0.4 0.52 0.57 1.8 8.4 50 4.5 4.9 5.2 5.5 5.9
ESTNB20054-5-04 0.27 0.54 4 0.37 5 0.4 0.52 0.59 1.8 7.8 50 5.5 6 6.3 6.6 7.1
ESTNB20054-6-04 0.27 0.54 4 0.37 6 0.4 0.52 0.6 1.8 7.2 50 6.7 7.3 7.8 8.2 8.8
ESTNB20054-6.5-04 0.27 0.54 4 0.37 6.5 0.4 0.52 0.61 1.8 7 50 7.2 7.9 8.3 8.7 9.4
ESTNB20054-7-04 0.27 0.54 4 0.37 7 0.4 0.52 0.61 1.8 6.8 50 7.7 8.4 8.9 9.3 10
ESTNB2006-2-04 0.3 0.6 4 0.4 2 0.4 0.57 0.59 2.17 10 50 2.4 2.5 2.7 2.8 3
ESTNB2006-4-04 0.3 0.6 4 0.4 4 0.4 0.57 0.62 2.54 8.4 50 4.6 5 5.2 5.5 5.9
ESTNB2006-6-04 0.3 0.6 4 0.4 6 0.4 0.57 0.65 2.54 7.2 50 6.8 7.4 7.8 8.2 8.8
ESTNB2006-6-09 0.3 0.6 4 0.4 6 0.9 0.57 0.75 1.35 7.3 50 - 6.9 7.5 7.9 8.6
ESTNB2006-8-09 0.3 0.6 4 0.4 8 0.9 0.57 0.81 1.35 6.4 50 - 8.9 9.6 10.1 10.9
ESTNB2006-10-04 0.3 0.6 4 0.4 10 0.4 0.57 0.7 2.54 5.6 50 10.8 11.7 12.2 12.7 13.5
ESTNB2006-10-09 0.3 0.6 4 0.4 10 0.9 0.57 0.87 1.35 5.7 50 - 11 11.8 12.3 13.2
ESTNB2006-12-09 0.3 0.6 4 0.4 12 0.9 0.57 0.93 1.35 5.2 55 - 13 13.9 14.5 15.4
ESTNB2006-15-04 0.3 0.6 4 0.4 15 0.4 0.57 0.77 2.54 4.4 55 15.9 17 17.6 18.2 19.2
ESTNB2006-15-09 0.3 0.6 4 0.4 15 0.9 0.57 1.03 1.35 4.5 55 - 16.1 17.1 17.7 18.8
ESTNB2008-4-04 0.4 0.8 4 0.5 4 0.4 0.77 0.82 2.64 8.3 50 4.6 4.9 5.2 5.5 5.9
ESTNB2008-6-04 0.4 0.8 4 0.5 6 0.4 0.77 0.85 2.64 7.1 50 6.6 7.1 7.5 7.7 8.3
ESTNB2008-8-09 0.4 0.8 4 0.5 8 0.9 0.77 1.01 1.45 6.3 50 - 8.9 9.6 10.1 10.9
ESTNB2008-12-09 0.4 0.8 4 0.5 12 0.9 0.77 1.13 1.45 5 55 - 13 13.9 14.5 15.4
KORLOY
Y 93
Endmill
H-Star Endmill
EST
t50-&3"/$&
DATA ØD Ød
ULTRA 30 R R ~ Ø6
FINE
AlTiN 0 ~ -0.012mm
h5
HELIX ±0.01 ±0.015 Ø8 ~ Ø12 0 ~ -0.015mm
3 4
θ2 θ
1 (B.T:3~5°)
R App.L
2

(mm)

Designation
0.4 0.8 4 0.5 16 0.9 0.77 1.26 1.45 4.2 55 - 17.1 18.1 18.8 19.9
ESTNB2009-4-04 0.45 0.9 4 0.6 4 0.4 0.86 0.91 3.46 8.2 50 4.5 4.7 4.9 5.1 5.4
ESTNB2009-8-04 0.45 0.9 4 0.6 8 0.4 0.86 0.96 3.46 6.1 55 8.7 9.3 9.7 10 10.6
ESTNB2009-12-04 0.45 0.9 4 0.6 12 0.4 0.86 1.02 3.46 4.8 55 12.9 13.8 14.4 14.9 15.7
ESTNB2009-16-04 0.45 0.9 4 0.6 16 0.4 0.86 1.08 3.46 4 60 17 18 18.7 19.3 20.5
ESTNB2009-18-04 0.45 0.9 4 0.6 18 0.4 0.86 1.1 3.46 3.7 65 19.1 20.1 20.9 21.5 23.1
ESTNB2009-20-04 0.45 0.9 4 0.6 20 0.4 0.86 1.13 3.46 3.4 65 21.1 22.2 23 23.6 25.6
ESTNB2009-22-04 0.45 0.9 4 0.6 22 0.4 0.86 1.16 3.46 3.2 65 23.1 24.3 25.1 25.8 28.2
ESTNB2009-24-04 0.45 0.9 4 0.6 24 0.4 0.86 1.19 3.46 3 70 25.2 26.4 27.2 27.9 -
ESTNB2010-6-04 0.5 1 6 0.8 6 0.4 0.94 1.01 5.09 8.3 50 6.8 7.2 7.5 7.8 8.3
ESTNB2010-8-04 0.5 1 6 0.8 8 0.4 0.94 1.04 5.09 7.5 55 8.8 9.3 9.7 10 10.6
ESTNB2010-10-04 0.5 1 6 0.8 10 0.4 0.94 1.07 5.09 6.8 55 11 11.7 12.3 12.7 13.5
ESTNB2010-10-09 0.5 1 6 0.8 10 0.9 0.94 1.23 2.7 6.9 55 - 11.2 11.9 12.4 13.2
ESTNB2010-15-09 0.5 1 6 0.8 15 0.9 0.94 1.39 2.7 5.7 60 - 16.2 17.1 17.8 18.8
ESTNB2010-20-04 0.5 1 6 0.8 20 0.4 0.94 1.21 5.09 4.7 65 21.2 22.3 23 23.6 25.7
ESTNB2010-20-09 0.5 1 6 0.8 20 0.4 0.94 1.54 2.7 4.8 65 - 21.3 22.4 23.1 24.6
ESTNB2010-25-09 0.5 1 6 0.8 25 0.4 0.94 1.7 2.7 4.2 70 - 26.4 27.6 28.4 30.8
ESTNB2010-30-04 0.5 1 6 0.8 30 0.4 0.94 1.35 5.09 3.6 75 31.3 32.7 33.6 34.8 38.5
ESTNB2010-30-09 0.5 1 6 0.8 30 0.9 0.94 1.86 2.7 3.7 75 - 31.4 32.8 33.7 36.9
ESTNB2010-35-09 0.5 1 6 0.8 35 0.9 0.94 2.02 2.7 3.3 80 - 36.5 38 39 43.1
ESTNB2010-40-09 0.5 1 6 0.8 40 0.9 0.94 2.17 2.7 3 85 - 41.6 43.2 44.4 -
ESTNB2010-50-09 0.5 1 6 0.8 50 0.9 0.94 2.49 2.7 2.5 95 - 51.7 53.5 55.5 -
ESTNB2010-60-09 0.5 1 6 0.8 60 0.9 0.94 2.8 2.7 2.2 105 - 61.8 63.8 66.6 -
ESTNB2010-70-09 0.5 1 6 0.8 70 0.9 0.94 3.11 2.7 1.9 115 - 71.9 74 - -
ESTNB2015-8-04 0.75 1.5 6 1.35 8 0.4 1.42 1.51 7.07 7.3 55 8.9 9.4 9.7 10 10.6
ESTNB2015-10-04 0.75 1.5 6 1.35 10 0.4 1.42 1.54 7.07 6.6 55 10.9 11.5 11.9 12.2 12.9
ESTNB2015-12-04 0.75 1.5 6 1.35 12 0.4 1.42 1.57 7.07 6 55 13 13.6 14 14.4 15.4
ESTNB2015-15-09 0.75 1.5 6 1.35 15 0.9 1.42 1.85 3.89 5.4 60 - 16.4 17.2 17.8 18.8
ESTNB2015-20-09 0.75 1.5 6 1.35 20 0.9 1.42 2.01 3.89 4.5 65 - 21.4 22.4 23.2 24.7
ESTNB2015-30-09 0.75 1.5 6 1.35 30 0.9 1.42 2.32 3.89 3.4 75 - 31.5 32.9 33.7 37
ESTNB2018-4-04 0.9 1.8 6 1.6 4 0.4 1.73 1.76 4.38 9.2 50 4.6 4.8 4.9 5.1 5.4
ESTNB2018-8-04 0.9 1.8 6 1.6 8 0.4 1.73 1.82 6.61 7.1 50 8.6 9 9.2 9.4 10.2
ESTNB2018-12-04 0.9 1.8 6 1.6 12 0.4 1.73 1.88 6.61 5.8 55 12.9 13.5 14 14.4 15.4
ESTNB2018-16-04 0.9 1.8 6 1.6 16 0.4 1.73 1.93 6.61 4.9 60 17 17.7 18.3 18.7 20.5
ESTNB2018-20-04 0.9 1.8 6 1.6 20 0.4 1.73 1.99 6.61 4.3 65 21.2 22.3 23 23.6 25.6
ESTNB2018-24-04 0.9 1.8 6 1.6 24 0.4 1.73 2.04 6.61 3.8 65 25.3 26.5 27.3 27.9 30.8
94 KORLOY
EST
t50-&3"/$&
DATA ØD Ød
ULTRA 30 R R ~ Ø6
FINE
AlTiN 0 ~ -0.012mm
h5
HELIX ±0.01 ±0.015 Ø8 ~ Ø12 0 ~ -0.015mm
3 4
θ2 θ
1 (B.T:3~5°)
R App.L
2

(mm)

Designation
ESTNB2018-28-04 0.9 1.8 6 1.6 28 0.4 1.73 2.1 6.61 3.4 70 29.4 30.6 31.5 32.4 35.9
ESTNB2018-32-04 0.9 1.8 6 1.6 32 0.4 1.73 2.15 6.61 3 70 33.4 34.8 35.7 37.1 -
ESTNB2018-36-04 0.9 1.8 6 1.6 36 0.4 1.73 2.21 6.61 2.8 75 37.5 38.9 39.9 41.7 -
ESTNB2018-38-04 0.9 1.8 6 1.6 38 0.4 1.73 2.24 6.61 2.7 80 39.5 41 42 44 -
ESTNB2018-40-04 0.9 1.8 6 1.6 40 0.4 1.73 2.27 6.61 2.6 80 41.5 43.1 44.2 46.3 -
ESTNB2020-8-04 1 2 6 1.7 8 0.4 1.92 2.01 7.42 7 50 8.7 9 9.2 9.5 10.2
ESTNB2020-12-04 1 2 6 1.7 12 0.4 1.92 2.06 7.42 5.7 55 13 13.6 14 14.4 15.4
ESTNB2020-16-04 1 2 6 1.7 16 0.4 1.92 2.12 7.42 4.8 60 17 17.7 18.3 18.7 20.5
ESTNB2020-20-04 1 2 6 1.7 20 0.4 1.92 2.18 7.42 4.1 65 21.3 22.3 23 23.6 25.6
ESTNB2020-20-09 1 2 6 1.7 20 0.9 1.92 2.5 4.24 4.2 65 - 21.4 22.4 23.2 24.6
ESTNB2020-25-09 1 2 6 1.7 25 0.9 1.92 2.65 4.24 3.6 65 - 26.5 27.7 28.5 30.8
ESTNB2020-30-04 1 2 6 1.7 30 0.4 1.92 2.32 7.42 3.1 70 31.4 32.7 33.6 34.8 38.5
ESTNB2020-30-09 1 2 6 1.7 30 0.9 1.92 2.81 4.24 3.2 70 - 31.6 32.9 33.7 36.9
ESTNB2020-35-09 1 2 6 1.7 35 0.9 1.92 2.97 4.24 2.8 75 - 36.6 38 39 -
ESTNB2020-40-04 1 2 6 1.7 40 0.4 1.92 2.46 7.42 2.5 80 41.5 43.1 44.2 46.3 -
ESTNB2020-40-09 1 2 6 1.7 40 0.9 1.92 3.12 4.24 2.6 80 - 41.7 43.2 44.5 -
ESTNB2020-50-09 1 2 6 1.7 50 0.9 1.92 3.44 4.24 2.1 90 - 51.5 53.5 55.5 -
ESTNB2020-60-09 1 2 6 1.7 60 0.9 1.92 3.75 4.24 1.8 100 - 61.9 63.8 - -
ESTNB2020-70-09 1 2 6 1.7 70 0.9 1.92 4.07 4.24 1.8 110 - 72 74.1 - -
ESTNB2030-8-04 1.5 3 6 2.5 8 0.4 2.86 2.94 8.5 6.3 50 8.8 9.1 9.3 9.5 10.3
ESTNB2030-16-04 1.5 3 6 2.5 16 0.4 2.86 3.05 12.52 4.1 55 17.2 17.8 18.3 18.7 20.6
ESTNB2030-20-04 1.5 3 6 2.5 20 0.4 2.86 3.1 12.52 3.4 60 21.2 22 22.6 23.3 25.7
ESTNB2030-30-04 1.5 3 6 2.5 30 0.4 2.86 3.24 12.52 2.5 70 31.6 32.8 33.7 34.9 -
ESTNB2030-30-09 1.5 3 6 2.5 30 0.9 2.86 3.72 6.95 2.6 70 - 31.8 33 33.8 -
ESTNB2030-40-04 1.5 3 6 2.5 40 0.4 2.86 3.38 12.52 2 80 41.7 43.2 44.3 - -
ESTNB2030-40-09 1.5 3 6 2.5 40 0.9 2.86 4.04 6.95 2 80 - 41.9 43.3 - -
ESTNB2030-50-09 1.5 3 6 2.5 50 0.9 2.86 4.35 6.95 1.7 90 - 52 53.6 - -
ESTNB2030-60-09 1.5 3 6 2.5 60 0.9 2.86 4.67 6.95 1.4 100 - 62.1 - - -
ESTNB2030-70-09 1.5 3 6 2.5 70 0.9 2.86 4.98 6.95 1.2 110 - 72.1 - - -
ESTNB2040-20-10 2 4 8 8 20 1 3.86 4.28 12.01 5 70 20.5 21.6 22.3 22.8 23.5
ESTNB2040-30-10 2 4 8 8 30 1 3.86 4.63 12.01 3.51 80 22 31.6 32.5 33.2 34.16
ESTNB2040-40-10 2 4 8 8 40 1 3.86 4.98 12.01 2.7 90 22 42 43.4 44.3 -
ESTNB2040-50-10 2 4 8 8 50 1 3.86 5.33 12.01 2.2 100 22 52 53.6 54.7 -
ESTNB2040-60-10 2 4 8 8 60 1 3.86 5.68 12.01 1.9 110 22 62 63.8 - -
ESTNB2050-30-10 2.5 5 8 10 30 1 4.86 5.56 14.01 2.8 80 25.5 31.7 32.6 33.2 -
ESTNB2050-40-10 2.5 5 8 10 40 1 4.86 5.91 14.01 2.1 90 25.5 41.7 42.8 43.5 -
KORLOY
Y 95
Endmill
H-Star Endmill
EST
t50-&3"/$&
DATA ØD Ød
ULTRA 30 R R ~ Ø6
FINE
AlTiN 0 ~ -0.012mm
h5
HELIX ±0.01 ±0.015 Ø8 ~ Ø12 0 ~ -0.015mm
3 4
θ2 θ
1 (B.T:3~5°)
R App.L
2

(mm)

Designation
2.5 5 8 10 60 1 4.86 6.61 14.01 1.5 110 25.5 62.1 - - -
ESTNB2060-30-10 3 6 8 12 30 1 5.86 6.49 16.01 1.9 80 29 31.8 32.6 - -
ESTNB2060-40-10 3 6 8 12 40 1 5.86 6.84 16.01 1.5 90 29 41.8 - - -
ESTNB2060-50-10 3 6 8 12 50 1 5.86 7.19 16.01 1.2 100 29 51.8 - - -
ESTNB2060-60-10 3 6 10 12 60 1 5.86 7.54 16.01 1.9 110 29 62.2 63.9 - -
ESTNB2060-70-10 3 6 10 12 70 1 5.86 7.89 16.01 1.7 120 29 72.2 74.1 - -
ESTNB2060-80-10 3 6 10 12 80 1 5.86 8.23 16.01 1.5 130 29 82.2 - - -
ESTNB2080-50-10 4 8 10 14 50 1 7.86 9.12 18.01 1.2 110 32 51.9 - - -
ESTNB2080-60-10 4 8 10 14 60 1 7.86 9.47 18.01 1 120 32 - - - -
ESTNB2080-70-10 4 8 10 14 70 1 7.86 9.82 18.01 0.9 130 32 - - - -
ESTNB2080-80-10 4 8 12 14 80 1 7.86 10.16 18.01 1.5 140 32 82.3 - - -
ESTNB2100-60-10 5 10 12 18 60 1 9.86 11.33 22.01 1.1 130 39 62.1 - - -
ESTNB2100-75-10 5 10 12 18 75 1 9.86 11.85 22.01 0.9 140 39 - - - -
○ ◎ ◎ ○
96 KORLOY
EST
t50-&3"/$&
ØD Ød
ULTRA 30 R AlTiN
DATA
~ Ø6 0 ~ -0.012mm
FINE ±0.005 h5
HELIX Ø8 ~ Ø12 0 ~ -0.015mm
All sizes p.461~464
3 4
θ2 θ
1 (B.T:3~5°)
R
App.L
2

(mm)

Designation
ESTNB3020-8-04 1 2 6 1.7 8 0.4 1.92 2.01 7.42 7 50 8.7 9 9.2 9.5 10.2
ESTNB3020-12-04 1 2 6 1.7 12 0.4 1.92 2.06 7.42 5.7 55 13 13.6 14 14.4 15.4
ESTNB3020-16-04 1 2 6 1.7 16 0.4 1.92 2.12 7.42 4.8 60 17 17.7 18.3 18.7 20.5
ESTNB3020-20-04 1 2 6 1.7 20 0.4 1.92 2.18 7.42 4.1 65 21.3 22.3 23 23.6 25.6
ESTNB3020-20-09 1 2 6 1.7 20 0.9 1.92 2.5 4.24 4.2 65 - 21.4 22.4 23.2 24.6
ESTNB3020-25-09 1 2 6 1.7 25 0.9 1.92 2.65 4.24 3.6 65 - 26.5 27.7 28.5 30.8
ESTNB3020-30-04 1 2 6 1.7 30 0.4 1.92 2.32 7.42 3.1 70 31.4 32.7 33.6 34.8 38.5
ESTNB3020-30-09 1 2 6 1.7 30 0.9 1.92 2.81 4.24 3.2 70 - 31.6 32.9 33.7 36.9
ESTNB3020-35-09 1 2 6 1.7 35 0.9 1.92 2.97 4.24 2.8 75 - 36.6 38 39 -
ESTNB3020-40-04 1 2 6 1.7 40 0.4 1.92 2.46 7.42 2.5 80 41.5 43.1 44.2 46.3 -
ESTNB3020-40-09 1 2 6 1.7 40 0.9 1.92 3.12 4.24 2.6 80 - 41.7 43.2 44.5 -
ESTNB3020-50-09 1 2 6 1.7 50 0.9 1.92 3.44 4.24 2.1 90 - 51.8 53.5 55.5 -
ESTNB3020-60-09 1 2 6 1.7 60 0.9 1.92 3.75 4.24 1.8 100 - 61.9 63.8 - -
ESTNB3020-70-09 1 2 6 1.7 70 0.9 1.92 4.07 4.24 1.6 110 - 72 74.1 - -
ESTNB3030-8-04 1.5 3 6 2.5 8 0.4 2.86 2.94 8.5 6.3 50 8.8 9.1 9.3 9.5 10.3
ESTNB3030-16-04 1.5 3 6 2.5 16 0.4 2.86 3.05 12.52 4.1 55 17.2 17.8 18.3 18.7 20.6
ESTNB3030-20-04 1.5 3 6 2.5 20 0.4 2.86 3.1 12.52 3.4 60 21.2 22 22.6 23.3 25.7
ESTNB3030-30-04 1.5 3 6 2.5 30 0.4 2.86 3.24 12.52 2.5 70 31.6 32.8 33.7 34.9 -
ESTNB3030-30-09 1.5 3 6 2.5 30 0.9 2.86 3.72 6.95 2.6 70 - 31.8 33 33.8 -
ESTNB3030-40-04 1.5 3 6 2.5 40 0.4 2.86 3.38 12.52 2 80 41.7 43.2 44.3 - -
ESTNB3030-40-09 1.5 3 6 2.5 40 0.9 2.86 4.04 6.95 2 80 - 41.9 43.3 - -
ESTNB3030-50-09 1.5 3 6 2.5 50 0.9 2.86 4.35 6.95 1.7 90 - 52 53.6 - -
ESTNB3030-60-09 1.5 3 6 2.5 60 0.9 2.86 4.67 6.95 1.4 100 - 62.1 - - -
ESTNB3030-70-09 1.5 3 6 2.5 70 0.9 2.86 4.98 6.95 1.2 110 - 72.1 - - -
ESTNB3040-20-10 2 4 8 8 20 1 3.86 4.28 12.01 5 70 20.5 21.6 22.3 22.8 23.5
ESTNB3040-30-10 2 4 8 8 30 1 3.86 4.63 12.01 3.6 80 22 31.6 32.5 33.2 34.1
ESTNB3040-40-10 2 4 8 8 40 1 3.86 4.98 12.01 2.7 90 22 42 43.4 44.3 -
ESTNB3040-50-10 2 4 8 8 50 1 3.86 5.33 12.01 2.2 100 22 52 53.6 54.7 -
ESTNB3040-60-10 2 4 8 8 60 1 3.86 5.68 12.01 1.9 110 22 62 63.8 - -
ESTNB3050-30-10 2.5 5 8 10 30 1 4.86 5.56 14.01 2.8 80 25.5 31.7 32.6 33.2 -
KORLOY
Y 97
Endmill
H-Star Endmill
EST
t50-&3"/$&
ØD Ød
ULTRA 30 R AlTiN
DATA
~ Ø6 0 ~ -0.012mm
FINE ±0.005 h5
HELIX Ø8 ~ Ø12 0 ~ -0.015mm
All sizes p.461~464
3 4
θ2 θ
1 (B.T:3~5°)
R
App.L
2

(mm)

Designation
2.5 5 8 10 40 1 4.86 5.91 14.01 2.1 90 25.5 41.7 42.8 43.5 -
ESTNB3050-60-10 2.5 5 8 10 60 1 4.86 6.61 12.52 1.5 110 25.5 62.1 - - -

Effective neck L2
length
Rake ang
gle
○ ◎ ◎ ○
98 KORLOY
ESL
SLNS20 2 Flutes long neck type flat endmill
t50-&3"/$&
DATA ØD Ød
ULTRA 45
FINE
AlTiN All sizes 0 ~ -0.012mm h5
HELIX
p.465
3 θ
1
2
(mm)

Designation
ØD Ød ℓ1 ℓ2 D3 ѡ L 0.5° 1° 1.5° 2° 3°
ESLNS2001-0.3 0.1 4 0.15 0.3 0.08 11.6 45 0.4 0.4 0.5 0.5 0.5
ESLNS2001-0.5 0.1 4 0.15 0.5 0.08 11.4 45 0.6 0.7 0.7 0.7 0.8
ESLNS2001-1 0.1 4 0.15 1 0.08 10.9 45 1.2 1.2 1.2 1.3 1.4
ESLNS2002-0.5 0.2 4 0.3 0.5 0.17 11.3 50 1.2 1.3 1.5 1.7 2
ESLNS2002-1 0.2 4 0.3 1 0.17 10.8 50 1.7 1.9 2.2 2.4 2.7
ESLNS2002-1.5 0.2 4 0.3 1.5 0.17 10.3 50 2.3 2.5 2.8 3 3.4
ESLNS2003-1 0.3 4 0.45 1 0.27 10.8 50 1.7 1.9 2.2 2.4 2.7
ESLNS2003-1.5 0.3 4 0.45 1.5 0.27 10.3 50 2.3 2.5 2.8 3 3.4
ESLNS2003-2 0.3 4 0.45 2 0.27 9.8 50 2.8 3.1 3.4 3.6 4.1
ESLNS2003-2.5 0.3 4 0.45 2.5 0.27 9.4 50 3.4 3.7 4 4.3 4.7
ESLNS2003-3 0.3 4 0.45 3 0.27 9 50 3.9 4.3 4.6 4.9 5.4
ESLNS2004-1 0.4 4 0.6 1 0.37 10.7 50 1.7 1.9 2.2 2.4 2.7
ESLNS2004-1.5 0.4 4 0.6 1.5 0.37 10.2 50 2.3 2.5 2.8 3 3.4
ESLNS2004-2 0.4 4 0.6 2 0.37 9.7 50 2.8 3.1 3.4 3.6 4.1
ESLNS2004-2.5 0.4 4 0.6 2.5 0.37 9.3 50 3.4 3.7 4 4.3 4.7
ESLNS2004-3 0.4 4 0.6 3 0.37 8.9 50 3.9 4.3 4.6 4.9 5.4
ESLNS2004-3.5 0.4 4 0.6 3.5 0.37 8.6 50 4.5 4.9 5.2 5.5 6
ESLNS2004-4 0.4 4 0.6 4 0.37 8.2 50 5 5.4 5.8 6.1 6.6
ESLNS2004-5 0.4 4 0.6 5 0.37 7.6 50 6.1 6.6 6.9 7.3 7.8
ESLNS2004-6 0.4 4 0.6 6 0.37 7.1 50 7.2 7.7 8.1 8.4 9
ESLNS2005-1 0.5 4 0.75 1 0.47 10.7 50 1.7 1.9 2.2 2.4 2.7
ESLNS2005-1.5 0.5 4 0.75 1.5 0.47 10.2 50 2.3 2.5 2.8 3 3.4
ESLNS2005-2 0.5 4 0.75 2 0.47 9.7 50 2.8 3.1 3.4 3.6 4.1
ESLNS2005-2.5 0.5 4 0.75 2.5 0.47 9.3 50 3.4 3.7 4 4.3 4.7
ESLNS2005-3 0.5 4 0.75 3 0.47 8.9 50 3.9 4.3 4.6 4.9 5.4
ESLNS2005-4 0.5 4 0.75 4 0.47 8.1 50 5 5.4 5.8 6.1 6.6
ESLNS2005-5 0.5 4 0.75 5 0.47 7.5 50 6.1 6.6 6.9 7.3 7.8
ESLNS2005-6 0.5 4 0.75 6 0.47 7 50 7.2 7.7 8.1 8.4 9
ESLNS2005-8 0.5 4 0.75 8 0.47 6.2 50 9.3 9.9 10.3 10.7 11.4
ESLNS2006-2 0.6 4 0.9 2 0.57 9.6 50 2.8 3.1 3.4 3.6 4.1
ESLNS2006-4 0.6 4 0.9 4 0.57 6.9 50 7.2 7.7 8.1 8.4 9
ESLNS2006-6 0.6 4 0.9 6 0.57 6.1 50 9.3 9.9 10.3 10.7 11.4
ESLNS2006-8 0.6 4 0.9 8 0.57 5.4 50 11.5 12.1 12.6 13 13.7
ESLNS2006-10 0.6 4 0.9 10 0.57 9.6 50 2.8 3.1 3.4 3.6 4.1
ESLNS2007-2 0.7 4 1.05 2 0.67 8 50 5 5.4 5.8 6.1 6.6
ESLNS2007-4 0.7 4 1.05 4 0.67 6.9 50 7.2 7.7 8.1 8.4 9
ESLNS2007-6 0.7 4 1.05 6 0.67 6 50 9.3 9.9 10.3 10.7 11.4
ESLNS2007-8 0.7 4 1.05 8 0.67 5.3 50 11.5 12.1 12.6 13 13.7
ESLNS2007-10 0.7 4 1.2 10 0.77 7.9 50 5 5.4 5.8 6.1 6.6
ESLNS2008-4 0.8 4 1.2 4 0.77 6.8 50 7.2 7.7 8.1 8.4 9
KORLOY
Y 99
Endmill
H-Star Endmill
ESL
t50-&3"/$&
DATA ØD Ød
ULTRA 45
FINE
HELIX
p.465
3 θ
1
2
(mm)

Designation
ØD Ød ℓ1 ℓ2 D3 ѡ L 0.5° 1° 1.5° 2° 3°
ESLNS2008-6 0.8 4 1.2 6 0.77 5.9 50 9.3 9.9 10.3 10.7 11.4
ESLNS2008-8 0.8 4 1.2 8 0.77 5.2 50 11.5 12.1 12.6 13 13.7
ESLNS2008-10 0.8 4 1.2 10 0.77 4.7 55 13.6 14.2 14.8 15.2 16
ESLNS2008-12 0.8 4 1.2 12 0.77 6.7 55 7.2 7.7 8.1 8.4 9.1
ESLNS2009-6 0.9 4 1.35 6 0.86 5.8 50 9.4 9.9 10.4 10.7 11.4
ESLNS2009-8 0.9 4 1.35 8 0.86 5.1 50 11.5 12.1 12.6 13 13.7
ESLNS2009-10 0.9 4 1.35 10 0.86 4.6 55 13.6 14.3 14.8 15.2 16
ESLNS2009-12 0.9 4 1.35 12 0.86 9.4 55 2.9 3.2 3.4 3.7 4.1
ESLNS2010-2 1 4 1.5 2 0.96 7.7 50 5.1 5.5 5.8 6.1 6.6
ESLNS2010-4 1 4 1.5 4 0.96 6.6 50 7.2 7.7 8.1 8.4 9.1
ESLNS2010-6 1 4 1.5 6 0.96 5.7 50 9.4 9.9 10.4 10.7 11.4
ESLNS2010-8 1 4 1.5 8 0.96 5 50 11.5 12.1 12.6 13 13.7
ESLNS2010-10 1 4 1.5 10 0.96 4.5 55 13.6 14.3 14.8 15.2 16
ESLNS2010-12 1 4 1.5 12 0.96 4.1 55 15.7 16.4 17 17.4 18.7
ESLNS2010-14 1 4 1.5 14 0.96 3.8 60 17.8 18.6 19.1 19.6 21.3
ESLNS2010-16 1 4 1.5 16 0.96 3.2 60 22 22.8 23.5 24 26.6
ESLNS2010-20 1 4 1.5 20 0.96 6.3 60 7.3 7.7 8.1 8.5 9.1
ESLNS2012-6 1.2 4 1.8 6 1.15 5.5 50 9.4 9.9 10.4 10.8 11.4
ESLNS2012-8 1.2 4 1.8 8 1.15 4.8 50 11.5 12.1 12.6 13 13.7
ESLNS2012-10 1.2 4 1.8 10 1.15 11.5 50 12.1 12.6 13 13.7 16
ESLNS2012-12 1.2 4 1.8 12 1.15 4.3 55 13.6 14.3 14.8 15.2 16
ESLNS2012-16 1.2 4 1.8 16 1.15 3.6 55 17.8 18.6 19.2 19.7 21.3
ESLNS2014-6 1.4 4 2.1 6 1.34 6.1 50 7.3 7.8 8.1 8.5 9.1
ESLNS2014-8 1.4 4 2.1 8 1.34 5.3 50 9.4 10 10.4 10.8 11.5
ESLNS2014-10 1.4 4 2.1 10 1.34 4.6 50 11.6 12.1 12.6 13 13.8
ESLNS2014-12 1.4 4 2.1 12 1.34 4.1 55 13.7 14.3 14.8 15.3 16.1
ESLNS2014-14 1.4 4 2.1 14 1.34 3.7 55 15.8 16.5 17 17.5 18.7
ESLNS2014-16 1.4 4 2.1 16 1.34 3.4 55 17.9 18.6 19.2 19.7 21.4
ESLNS2015-4 1.5 4 2.25 4 1.44 7.2 50 5.2 5.5 5.9 6.2 6.7
ESLNS2015-6 1.5 4 2.25 6 1.44 6 50 7.3 7.8 8.1 8.5 9.1
ESLNS2015-8 1.5 4 2.25 8 1.44 5.1 50 9.4 10 10.4 10.8 11.5
ESLNS2015-10 1.5 4 2.25 10 1.44 4.5 50 11.6 12.1 12.6 13 13.8
ESLNS2015-12 1.5 4 2.25 12 1.44 4 55 13.7 14.3 14.8 15.3 16.1
ESLNS2015-14 1.5 4 2.25 14 1.44 3.6 55 15.8 16.5 17 17.5 18.7
ESLNS2015-16 1.5 4 2.25 16 1.44 3.3 55 17.9 18.6 19.2 19.7 -
ESLNS2015-18 1.5 4 2.25 18 1.44 3 60 20 20.7 21.3 21.9 -
ESLNS2015-20 1.5 4 2.25 20 1.44 2.8 60 22 22.9 23.5 24.1 -
ESLNS2015-25 1.5 4 2.25 25 1.44 2.4 65 27.3 28.1 28.8 30 -
ESLNS2016-6 1.6 4 2.4 6 1.54 5.9 50 7.3 7.8 8.1 8.5 9.1
ESLNS2016-8 1.6 4 2.4 8 1.54 5 50 9.4 10 10.4 10.8 11.5
100 KORLOY
ESL
t50-&3"/$&
DATA ØD Ød
ULTRA 45
FINE
HELIX
p.465
3 θ
1
2
(mm)

Designation
ØD Ød ℓ1 ℓ2 D3 ѡ L 0.5° 1° 1.5° 2° 3°
ESLNS2016-10 1.6 4 2.4 10 1.54 4.4 50 11.6 12.1 12.6 13 13.8
ESLNS2016-12 1.6 4 2.4 12 1.54 3.9 55 13.7 14.3 14.8 15.3 16.1
ESLNS2016-14 1.6 4 2.4 14 1.54 3.5 55 15.8 16.5 17 17.5 18.7
ESLNS2016-16 1.6 4 2.4 16 1.54 3.2 55 17.9 18.6 19.2 19.7 21.4
ESLNS2016-18 1.6 4 2.4 18 1.54 2.9 60 20 20.7 21.3 21.9 -
ESLNS2016-20 1.6 4 2.4 20 1.54 2.7 60 22 22.9 23.5 24.1 -
ESLNS2018-6 1.8 4 2.7 6 1.73 5.6 50 7.4 7.8 8.2 8.5 9.1
ESLNS2018-8 1.8 4 2.7 8 1.73 4.8 50 9.5 10 10.4 10.8 11.5
ESLNS2018-10 1.8 4 2.7 10 1.73 4.2 50 11.6 12.2 12.6 13 13.8
ESLNS2018-12 1.8 4 2.7 12 1.73 3.7 55 13.7 14.3 14.8 15.3 16.1
ESLNS2018-14 1.8 4 2.7 14 1.73 3.3 55 15.8 16.5 17 17.5 18.8
ESLNS2018-16 1.8 4 2.7 16 1.73 3 55 17.9 18.6 19.2 19.7 -
ESLNS2018-18 1.8 4 2.7 18 1.73 2.7 60 20 20.7 21.3 21.9 -
ESLNS2018-20 1.8 4 2.7 20 1.73 2.5 60 22.1 22.9 23.5 24.1 -
ESLNS2020-4 2 4 3 4 1.92 6.5 50 5.3 5.6 5.9 6.2 6.7
ESLNS2020-6 2 4 3 6 1.92 5.3 50 7.4 7.8 8.2 8.5 9.1
ESLNS2020-8 2 4 3 8 1.92 4.5 50 9.5 10 10.4 10.8 11.5
ESLNS2020-10 2 4 3 10 1.92 3.9 50 11.6 12.2 12.7 13.1 13.8
ESLNS2020-12 2 4 3 12 1.92 3.4 55 13.7 14.3 14.9 15.3 16.1
ESLNS2020-14 2 4 3 14 1.92 3.1 55 15.8 16.5 17 17.5 18.8
ESLNS2020-16 2 4 3 16 1.92 2.8 55 17.9 18.6 19.2 19.7 -
ESLNS2020-18 2 4 3 18 1.92 2.6 60 20 20.8 21.4 21.9 -
ESLNS2020-20 2 4 3 20 1.92 2.4 60 22.1 22.9 23.5 24.1 -
ESLNS2020-25 2 4 3 25 1.92 2 65 27.3 28.2 28.9 - -
ESLNS2020-30 2 4 3 30 1.92 1.7 70 32.5 33.4 34.4 - -
ESLNS2025-8 2.5 4 3.75 8 2.4 3.7 50 9.6 10.1 10.5 10.9 11.5
ESLNS2025-10 2.5 4 3.75 10 2.4 3.1 50 11.7 12.2 12.7 13.1 13.8
ESLNS2025-12 2.5 4 3.75 12 2.4 2.7 55 13.8 14.4 14.9 15.3 -
ESLNS2025-14 2.5 4 3.75 14 2.4 2.4 55 15.9 16.5 17.1 17.5 -
ESLNS2025-16 2.5 4 3.75 16 2.4 2.2 55 18 18.7 19.2 19.7 -
ESLNS2025-18 2.5 4 3.75 18 2.4 2 55 20.1 20.8 21.4 - -
ESLNS2025-20 2.5 4 3.75 20 2.4 1.8 60 22.1 22.9 23.5 - -
ESLNS2025-25 2.5 4 3.75 25 2.4 1.5 60 27.3 28.2 - - -
ESLNS2025-30 2.5 4 3.75 30 2.4 1.3 70 32.6 33.5 - - -
ESLNS2030-8 3 6 4.5 8 2.88 5.6 55 9.6 10.1 10.5 10.9 11.5
ESLNS2030-10 3 6 4.5 10 2.88 5 55 11.7 12.3 12.7 13.1 13.8
ESLNS2030-12 3 6 4.5 12 2.88 4.5 60 13.8 14.4 14.9 15.4 16.3
ESLNS2030-14 3 6 4.5 14 2.88 4.1 60 15.9 16.6 17.1 17.6 18.9
ESLNS2030-16 3 6 4.5 16 2.88 3.7 60 18 18.7 19.3 19.8 21.6
ESLNS2030-18 3 6 4.5 18 2.88 3.4 60 20.1 20.8 21.4 21.9 24.2
KORLOY
Y 101
Endmill
H-Star Endmill
ESL
t50-&3"/$&
DATA ØD Ød
ULTRA 45
FINE
HELIX
p.465
3 θ
1
2
(mm)

Designation
ØD Ød ℓ1 ℓ2 D3 ѡ L 0.5° 1° 1.5° 2° 3°
ESLNS2030-20 3 6 4.5 20 2.88 3.2 65 22.2 23 23.6 24.2 26.9
ESLNS2030-25 3 6 4.5 25 2.88 2.7 70 27.4 28.2 28.9 30.2 -
ESLNS2030-30 3 6 4.5 30 2.88 2.4 75 32.6 33.5 34.5 36.2 -
ESLNS2030-35 3 6 4.5 35 2.88 2.1 80 37.7 38.7 40.2 42.2 -
ESLNS2030-40 3 6 4.5 40 2.88 1.9 90 42.9 43.9 45.9 - -
ESLNS2040-12 4 6 6 12 3.85 3.4 60 13.9 14.5 15 15.4 16.3
ESLNS2040-16 4 6 6 16 3.85 2.8 60 18.1 18.8 19.3 19.8 -
ESLNS2040-20 4 6 6 20 3.85 2.3 70 22.3 23 23.6 24.3 -
ESLNS2040-25 4 6 6 25 3.85 2 70 27.4 28.3 28.9 - -
ESLNS2040-30 4 6 6 30 3.85 1.7 80 32.6 33.5 34.6 - -
ESLNS2040-35 4 6 6 35 3.85 1.5 80 37.8 38.8 - - -
ESLNS2040-40 4 6 6 40 3.85 1.3 90 42.9 44 - - -
ESLNS2040-45 4 6 6 45 3.85 1.2 90 48.1 49.4 - - -
ESLNS2040-50 4 6 6 50 3.85 1.1 100 53.2 54.8 - - -
ESLNS2050-16 5 6 7.5 16 4.85 1.5 60 18.1 18.8 - - -
ESLNS2050-20 5 6 7.5 20 4.85 1.3 60 22.3 23 - - -
ESLNS2050-25 5 6 7.5 25 4.85 1.1 70 27.4 28.3 - - -
ESLNS2050-30 5 6 7.5 30 4.85 0.9 70 32.6 - - - -
ESLNS2050-35 5 6 7.5 35 4.85 0.8 80 37.8 - - - -
ESLNS2050-40 5 6 7.5 40 4.85 0.7 90 42.9 - - - -
ESLNS2050-50 5 6 7.5 50 4.85 0.6 100 53.2 - - - -
Effective neck L2
length
Rake ang
gle
○ ◎ ◎ ○
102 KORLOY
ESL
t50-&3"/$&
DATA ØD Ød
ULTRA 30
FINE
HELIX
p.465
3 θ
1
2
(mm)

Designation
ØD Ød ℓ1 ℓ2 D3 ѡ L 0.5° 1° 1.5° 2° 3°
ESLNS4010-4 1 4 1.5 4 0.96 7.7 50 5.1 5.5 5.8 6.1 6.6
ESLNS4010-6 1 4 1.5 6 0.96 6.6 50 7.2 7.7 8.1 8.4 9.1
ESLNS4010-8 1 4 1.5 8 0.96 5.7 50 9.4 9.9 10.4 10.7 11.4
ESLNS4010-10 1 4 1.5 10 0.96 5 50 11.5 12.1 12.6 13 13.7
ESLNS4015-4 1.5 4 2.25 4 1.44 7.2 50 5.2 5.5 5.9 6.2 6.7
ESLNS4015-6 1.5 4 2.25 6 1.44 6 50 7.3 7.8 8.1 8.5 9.1
ESLNS4015-8 1.5 4 2.25 8 1.44 5.1 50 9.4 10 10.4 10.8 11.5
ESLNS4015-10 1.5 4 2.25 10 1.44 4.5 50 11.6 12.1 12.6 13 13.8
ESLNS4015-12 1.5 4 2.25 12 1.44 4 55 13.7 14.3 14.8 15.3 16.1
ESLNS4015-14 1.5 4 2.25 14 1.44 3.6 55 15.8 16.5 17 17.5 18.7
ESLNS4015-16 1.5 4 2.25 16 1.44 3.3 55 17.9 18.6 19.2 19.7 -
ESLNS4015-18 1.5 4 2.25 18 1.44 3 60 20 20.7 21.3 21.9 -
ESLNS4015-20 1.5 4 2.25 20 1.44 2.8 60 22 22.9 23.5 24.1 -
ESLNS4015-25 1.5 4 2.25 25 1.44 2.4 65 27.3 28.1 28.8 30 -
ESLNS4020-4 2 4 3 4 1.92 6.5 50 5.3 5.6 5.9 6.2 6.7
ESLNS4020-6 2 4 3 6 1.92 5.3 50 7.4 7.8 8.2 8.5 9.1
ESLNS4020-8 2 4 3 8 1.92 4.5 50 9.5 10 10.4 10.8 11.5
ESLNS4020-10 2 4 3 10 1.92 3.9 50 11.6 12.2 12.7 13.1 13.8
ESLNS4020-12 2 4 3 12 1.92 3.4 55 13.7 14.3 14.9 15.3 16.1
ESLNS4020-14 2 4 3 14 1.92 3.1 55 15.8 16.5 17 17.5 18.8
ESLNS4020-16 2 4 3 16 1.92 2.8 55 17.9 18.6 19.2 19.7 -
ESLNS4020-18 2 4 3 18 1.92 2.6 60 20 20.8 21.4 21.9 -
ESLNS4020-20 2 4 3 20 1.92 2.4 60 22.1 22.9 23.5 24.1 -
ESLNS4020-25 2 4 3 25 1.92 2 65 27.3 28.2 28.9 - -
ESLNS4020-30 2 4 3 30 1.92 1.7 70 32.5 33.4 34.4 - -
ESLNS4025-8 2.5 4 3.75 8 2.4 3.7 50 9.6 10.1 10.5 10.9 11.5
ESLNS4025-10 2.5 4 3.75 10 2.4 3.1 50 11.7 12.2 12.7 13.1 13.8
ESLNS4025-12 2.5 4 3.75 12 2.4 2.7 55 13.8 14.4 14.9 15.3 -
ESLNS4025-14 2.5 4 3.75 14 2.4 2.4 55 15.9 16.5 17.1 17.5 -
ESLNS4025-16 2.5 4 3.75 16 2.4 2.2 55 18 18.7 19.2 19.7 -
ESLNS4025-18 2.5 4 3.75 18 2.4 2 60 20.1 20.8 21.4 - -
ESLNS4025-20 2.5 4 3.75 20 2.4 1.8 60 22.1 22.9 23.5 - -
ESLNS4025-25 2.5 4 3.75 25 2.4 1.5 65 27.3 28.2 - - -
ESLNS4025-30 2.5 4 3.75 30 2.4 1.3 70 32.6 33.5 - - -
ESLNS4030-8 3 6 4.5 8 2.88 5.6 55 9.6 10.1 10.5 10.9 11.5
ESLNS4030-10 3 6 4.5 10 2.88 5 55 11.7 12.3 12.7 13.1 13.8
KORLOY
Y 103
Endmill
H-Star Endmill
ESL
t50-&3"/$&
DATA ØD Ød
ULTRA 30
FINE
HELIX
p.465
3 θ
1
2
(mm)

Designation
ØD Ød ℓ1 ℓ2 D3 ѡ L 0.5° 1° 1.5° 2° 3°
ESLNS4030-12 3 6 4.5 12 2.88 4.5 60 13.8 14.4 14.9 15.4 16.3
ESLNS4030-14 3 6 4.5 14 2.88 4.1 60 15.9 16.6 17.1 17.6 18.9
ESLNS4030-16 3 6 4.5 16 2.88 3.7 60 18 18.7 19.3 19.8 21.6
ESLNS4030-18 3 6 4.5 18 2.88 3.4 60 20.1 20.8 21.4 21.9 24.2
ESLNS4030-20 3 6 4.5 20 2.88 3.2 65 22.2 23 23.6 24.2 26.9
ESLNS4030-25 3 6 4.5 25 2.88 2.7 70 27.4 28.2 28.9 30.2 -
ESLNS4030-30 3 6 4.5 30 2.88 2.4 75 32.6 33.5 34.5 36.2 -
ESLNS4030-35 3 6 4.5 35 2.88 2.1 80 37.7 38.7 40.2 42.2 -
ESLNS4030-40 3 6 4.5 40 2.88 1.9 90 42.9 43.9 45.9 - -
ESLNS4040-12 4 6 6 12 3.85 3.4 60 13.9 14.5 15 15.4 16.3
ESLNS4040-16 4 6 6 16 3.85 2.8 60 18.1 18.8 19.3 19.8 -
ESLNS4040-20 4 6 6 20 3.85 2.3 70 22.3 23 23.6 24.3 -
ESLNS4040-25 4 6 6 25 3.85 2 70 27.4 28.3 28.9 - -
ESLNS4040-30 4 6 6 30 3.85 1.7 80 32.6 33.5 34.6 - -
ESLNS4040-35 4 6 6 35 3.85 1.5 80 37.8 38.8 - - -
ESLNS4040-40 4 6 6 40 3.85 1.3 90 42.9 44 - - -
ESLNS4040-45 4 6 6 45 3.85 1.2 90 48.1 49.4 - - -
ESLNS4040-50 4 6 6 50 3.85 1.1 100 53.2 54.8 - - -
ESLNS4050-16 5 6 7.5 16 4.85 1.5 60 18.1 18.8 - - -
ESLNS4050-20 5 6 7.5 20 4.85 1.3 60 22.3 23 - - -
ESLNS4050-25 5 6 7.5 25 4.85 1.1 70 27.4 28.3 - - -
ESLNS4050-30 5 6 7.5 30 4.85 0.9 70 32.6 - - - -
ESLNS4050-35 5 6 7.5 35 4.85 0.8 80 37.8 - - - -
ESLNS4050-40 5 6 7.5 40 4.85 0.7 90 42.9 - - - -
ESLNS4050-50 5 6 7.5 50 4.85 0.6 100 53.2 - - - -
○ ◎ ◎ ○
104 KORLOY
ESL
SLNR 2 Flutes long neck type radius endmill
t50-&3"/$&
DATA ØD Ød
ULTRA 30 R
FINE
HELIX ±0.01
All sizes p.466~468
3 θ
1 (B.T:1.5~6°)
R 2
(mm)

Designation
R ØD Ød ℓ1 ℓ2 D3 ѡ L 0.5° 1° 1.5° 2° 3°
ESLNR2002-0.5-005 0.05 0.2 4 0.15 0.5 0.17 11.4 50 0.9 1 1 1.1 12
ESLNR2002-1-005 0.05 0.2 4 0.15 1 0.17 10.9 50 1.6 1.7 1.9 2 2.3
ESLNR2002-1.5-005 0.05 0.2 4 0.15 1.5 0.17 10.3 50 2.1 2.3 2.5 2.7 3
ESLNR2002-2-005 0.05 0.2 4 0.15 2 0.17 9.9 50 2.8 3.1 3.4 3.6 4.1
ESLNR2003-1-005 0.05 0.3 4 0.25 1 0.27 10.8 50 1.4 1.5 1.6 1.7 1.9
ESLNR2003-1.5-005 0.05 0.3 4 0.25 1.5 0.27 10.3 50 2.1 2.3 2.5 2.7 3
ESLNR2003-2.5-005 0.05 0.3 4 0.25 2.5 0.27 9.8 50 2.7 2.9 3.1 3.3 3.6
ESLNR2003-2-005 0.05 0.3 4 0.25 2 0.27 9.4 50 3.2 3.5 3.7 3.9 4.3
ESLNR2003-3-005 0.05 0.3 4 0.25 3 0.27 9 50 3.9 4.3 4.6 4.9 5.4
ESLNR2004-1-005 0.05 0.4 4 0.3 1 0.37 10.8 50 1.4 1.5 1.6 1.7 1.9
ESLNR2004-1.5-005 0.05 0.4 4 0.3 1.5 0.37 10.3 50 2 2.1 2.2 2.3 2.5
ESLNR2004-2-005 0.05 0.4 4 0.3 2 0.37 9.8 50 2.7 2.9 3.1 3.3 3.6
ESLNR2004-2.5-005 0.05 0.4 4 0.3 2.5 0.37 9.4 50 3.2 3.5 3.7 3.9 4.3
ESLNR2004-3-005 0.05 0.4 4 0.3 3 0.37 9 50 3.8 4 4.3 4.5 4.9
ESLNR2004-3.5-005 0.05 0.4 4 0.3 3.5 0.37 8.6 50 4.3 4.6 4.9 5.1 5.5
ESLNR2004-4-005 0.05 0.4 4 0.3 4 0.37 8.3 50 5 5.4 5.8 6.1 6.6
ESLNR2004-2-01 0.1 0.4 4 0.3 2 0.37 9.8 50 2.7 2.9 3.1 3.3 3.6
ESLNR2004-3-01 0.1 0.4 4 0.3 3 0.37 9 50 3.8 4 4.3 4.5 4.9
ESLNR2004-4-01 0.1 0.4 4 0.3 4 0.37 8.3 50 5 5.4 5.8 6.1 6.6
ESLNR2005-1-005 0.05 0.5 4 0.35 1 0.47 10.8 50 1.4 1.5 1.6 1.7 1.9
ESLNR2005-2-005 0.05 0.5 4 0.35 2 0.47 9.7 50 2.5 2.6 2.8 2.9 3.1
ESLNR2005-3-005 0.05 0.5 4 0.35 3 0.47 8.9 50 3.8 4 4.3 4.5 4.9
ESLNR2005-4-005 0.05 0.5 4 0.35 4 0.47 8.2 50 4.8 5.2 5.4 5.7 6.1
ESLNR2005-5-005 0.05 0.5 4 0.35 5 0.47 7.6 50 6.1 6.6 6.9 7.3 7.8
ESLNR2005-6-005 0.05 0.5 4 0.35 6 0.47 7 50 7.2 7.7 8.1 8.4 9
ESLNR2005-1-01 0.1 0.5 4 0.35 1 0.47 10.8 50 1.4 1.5 1.6 1.7 1.9
ESLNR2005-2-01 0.1 0.5 4 0.35 2 0.47 9.8 50 2.5 2.6 2.8 2.9 3.1
ESLNR2005-3-01 0.1 0.5 4 0.35 3 0.47 8.9 50 3.8 4 4.3 4.5 4.9
ESLNR2005-4-01 0.1 0.5 4 0.35 4 0.47 8.2 50 4.8 5.2 5.4 5.7 6.1
ESLNR2005-5-01 0.1 0.5 4 0.35 5 0.47 7.6 50 6.1 6.5 6.9 7.2 7.8
ESLNR2005-6-01 0.1 0.5 4 0.35 6 0.47 7.1 50 7.2 7.7 8.1 8.4 9
ESLNR2006-2-01 0.1 0.6 4 0.4 2 0.57 9.7 50 2.5 2.6 2.8 2.9 3.1
ESLNR2006-4-01 0.1 0.6 4 0.4 4 0.57 8.1 50 4.8 5.2 5.4 5.7 6.1
ESLNR2006-6-01 0.1 0.6 4 0.4 6 0.57 7 50 7.2 7.7 8.1 8.4 9
KORLOY
Y 105
Endmill
H-Star Endmill
ESL
t50-&3"/$&
DATA ØD Ød
ULTRA 30 R
FINE
HELIX ±0.01
All sizes p.466~468
3 θ
1 (B.T:1.5~6°)
R 2
(mm)

Designation
R ØD Ød ℓ1 ℓ2 D3 ѡ L 0.5° 1° 1.5° 2° 3°
ESLNR2006-8-01 0.1 0.6 4 0.4 8 0.57 6.1 50 9.3 9.9 10.3 10.7 11
ESLNR2006-10-01 0.1 0.6 4 0.4 10 0.57 5.5 50 11.5 12.1 12.5 13 13.7
ESLNR2008-4-01 0.1 0.8 4 0.5 4 4 8 50 4.8 5.2 5.4 5.7 6.1
ESLNR2008-6-01 0.1 0.8 4 0.5 6 6 6.8 50 7 7.4 7.7 7.9 8.4
ESLNR2008-8-01 0.1 0.8 4 0.5 8 8 5.9 50 9.3 9.9 10.3 10.7 11.4
ESLNR2008-12-01 0.1 0.8 4 0.5 12 12 4.7 50 13.6 14.2 14.7 15.2 16
ESLNR2008-4-02 0.2 0.8 4 0.5 4 4 8 50 4.8 5.1 5.4 5.6 6.1
ESLNR2008-6-02 0.2 0.8 4 0.5 6 6 6.9 50 7 7.3 7.7 7.9 8.4
ESLNR2010-4-01 0.1 1 4 0.8 4 0.94 7.7 50 4.7 4.9 5.1 5.2 5.5
ESLNR2010-6-01 0.1 1 4 0.8 6 0.94 6.6 50 7.1 7.4 7.7 8 8.5
ESLNR2010-8-01 0.1 1 4 0.8 8 0.94 5.7 50 9.2 9.6 9.9 10.2 10.8
ESLNR2010-10-01 0.1 1 4 0.8 10 0.94 5.1 50 11.6 12.1 12.6 13 13.7
ESLNR2010-12-01 0.1 1 4 0.8 12 0.94 4.5 55 13.7 14.3 14.8 15.3 16
ESLNR2010-16-01 0.1 1 4 0.8 16 0.94 3.8 60 17.9 18.6 19.2 19.7 21.3
ESLNR2010-20-01 0.1 1 4 0.8 20 0.94 3.2 60 22 22.8 23.5 24 26.7
ESLNR2010-4-02 0.2 1 4 0.8 4 0.94 7.8 50 4.7 4.9 5.1 5.2 5.5
ESLNR2010-6-02 0.2 1 4 0.8 6 0.94 6.6 50 7.1 7.4 7.7 8 8.5
ESLNR2010-8-02 0.2 1 4 0.8 8 0.94 5.8 50 9.2 9.6 9.9 10.2 10.8
ESLNR2010-10-02 0.2 1 4 0.8 10 0.94 5.1 50 11.6 12.1 12.6 13 13.7
ESLNR2010-12-02 0.2 1 4 0.8 12 0.94 4.6 55 13.7 14.3 14.8 15.2 16
ESLNR2010-16-02 0.2 1 4 0.8 16 0.94 3.8 60 17.9 18.6 19.2 19.7 21.3
ESLNR2010-20-02 0.2 1 4 0.8 20 0.94 3.2 60 22 22.8 23.5 24 26.6
ESLNR2010-6-03 0.3 1 4 0.8 6 0.94 6.7 50 7.1 7.4 7.7 8 8.4
ESLNR2010-10-03 0.3 1 4 0.8 10 0.94 5.1 50 11.5 12.1 12.6 13 13.7
ESLNR2010-16-03 0.3 1 4 0.8 16 0.94 3.8 60 17.9 18.6 19.1 19.6 21.3
ESLNR2010-20-03 0.3 1 4 0.8 20 0.94 3.2 60 22 22.8 23.5 24 26.6
ESLNR2015-4-01 0.1 1.5 4 1.35 4 1.42 7.2 50 4.8 4.9 5.1 5.3 5.5
ESLNR2015-8-01 0.1 1.5 4 1.35 8 1.42 5.2 50 9.2 9.6 10 10.3 10.8
ESLNR2015-12-01 0.1 1.5 4 1.35 12 1.42 4 55 13.4 13.9 14.3 14.7 16.1
ESLNR2015-15-01 0.1 1.5 4 1.35 15 1.42 3.5 55 16.9 17.6 18.1 18.6 20.1
ESLNR2015-20-01 0.1 1.5 4 1.35 20 1.42 2.8 60 22.1 22.9 23.5 24.1 -
ESLNR2015-4-02 0.2 1.5 4 1.35 4 1.42 7.3 50 4.7 4.9 5.1 5.3 5.5
ESLNR2015-8-02 0.2 1.5 4 1.35 8 1.42 5.2 50 9.2 9.6 10 10.3 10.8
ESLNR2015-12-02 0.2 1.5 4 1.35 12 1.42 4.1 55 13.4 13.9 14.3 14.7 16.1
106 KORLOY
ESL
t50-&3"/$&
DATA ØD Ød
ULTRA 30 R
FINE
HELIX ±0.01
All sizes p.466~468
3 θ
1 (B.T:1.5~6°)
R 2
(mm)

Designation
R ØD Ød ℓ1 ℓ2 D3 ѡ L 0.5° 1° 1.5° 2° 3°
ESLNR2015-15-02 0.2 1.5 4 1.35 15 1.42 3.5 55 16.9 17.5 18.1 18.6 20
ESLNR2015-20-02 0.2 1.5 4 1.35 20 1.42 2.8 60 22.1 22.9 23.5 24.1 -
ESLNR2015-8-03 0.3 1.5 4 1.35 8 1.42 5.2 50 9.2 9.6 10 10.3 10.8
ESLNR2015-15-03 0.3 1.5 4 1.35 15 1.42 3.5 55 16.9 17.5 18.1 18.6 20
ESLNR2015-20-03 0.3 1.5 4 1.35 20 1.42 2.8 60 22.1 22.9 23.5 24 -
ESLNR2020-6-02 0.2 2 4 1.7 6 1.92 5.4 50 6.8 7.1 7.3 7.5 8.1
ESLNR2020-8-02 0.2 2 4 1.7 8 1.92 4.6 50 8.9 9.2 9.4 9.7 10.8
ESLNR2020-12-02 0.2 2 4 1.7 12 1.92 3.5 55 13.4 13.9 14.3 14.7 16.1
ESLNR2020-16-02 0.2 2 4 1.7 16 1.92 2.8 55 17.6 18.1 18.6 19.3 -
ESLNR2020-20-02 0.2 2 4 1.7 20 1.92 2.4 60 22.1 22.9 23.5 24.1 -
ESLNR2020-25-02 0.2 2 4 1.7 25 1.92 2 65 27.3 28.2 28.8 - -
ESLNR2020-30-02 0.2 2 4 1.7 30 1.92 1.7 70 32.5 33.4 34.4 - -
ESLNR2020-8-03 0.3 2 4 1.7 8 1.92 4.6 50 8.9 9.2 9.4 9.7 10.7
ESLNR2020-16-03 0.3 2 4 1.7 16 1.92 2.8 55 17.6 18.1 18.6 19.3 -
ESLNR2020-20-03 0.3 2 4 1.7 20 1.92 2.4 60 22.1 22.9 23.5 24 -
ESLNR2020-6-05 0.5 2 4 1.7 6 1.92 5.5 50 6.8 7.1 7.3 7.4 8
ESLNR2020-8-05 0.5 2 4 1.7 8 1.92 4.7 50 8.9 9.2 9.4 9.6 10.7
ESLNR2020-12-05 0.5 2 4 1.7 12 1.92 3.5 55 13.4 13.9 14.3 14.6 16
ESLNR2020-16-05 0.5 2 4 1.7 16 1.92 2.9 55 17.6 18.1 18.6 19.2 -
ESLNR2020-20-05 0.5 2 4 1.7 20 1.92 2.4 60 22.1 22.9 23.5 24 -
ESLNR2020-25-05 0.5 2 4 1.7 25 1.92 2 65 27.3 28.1 28.8 - -
ESLNR2020-30-05 0.5 2 4 1.7 30 1.92 1.7 70 32.5 33.4 34.3 - -
ESLNR2020-8-08 0.8 2 4 1.7 8 1.92 4.8 50 8.9 9.2 9.4 9.6 10.6
ESLNR2020-16-08 0.8 2 4 1.7 16 1.92 2.9 55 17.6 18.1 18.6 19.2 -
ESLNR2020-20-08 0.8 2 4 1.7 20 1.92 2.4 60 22.1 22.8 23.5 24 -
ESLNR2030-8-02 0.2 3 6 2.5 8 2.86 5.7 55 9 9.3 9.5 9.9 10.9
ESLNR2030-12-02 0.2 3 6 2.5 12 2.86 4.5 60 13.1 13.5 14 14.7 16.2
ESLNR2030-16-02 0.2 3 6 2.5 16 2.86 3.8 60 17.7 18.2 18.7 19.5 21.6
ESLNR2030-20-02 0.2 3 6 2.5 20 2.86 3.2 65 21.8 22.4 23.1 24.2 26.9
ESLNR2030-30-02 0.2 3 6 2.5 30 2.86 2.4 75 32.6 33.5 34.5 36.2 -
ESLNR2030-35-02 0.2 3 6 2.5 35 2.86 2.1 80 37.7 38.7 40.2 42.2 -
ESLNR2030-8-03 0.3 3 6 2.5 8 2.86 5.7 55 9 9.3 9.5 9.9 10.9
ESLNR2030-16-03 0.3 3 6 2.5 16 2.86 3.8 60 17.7 18.2 18.7 19.4 21.5
ESLNR2030-20-03 0.3 3 6 2.5 20 2.86 3.2 65 21.8 22.4 23.1 24.2 26.8
KORLOY
Y 107
Endmill
H-Star Endmill
ESL
t50-&3"/$&
DATA ØD Ød
ULTRA 30 R
FINE
HELIX ±0.01
All sizes p.466~468
3 θ
1 (B.T:1.5~6°)
R 2
(mm)

Designation
R ØD Ød ℓ1 ℓ2 D3 ѡ L 0.5° 1° 1.5° 2° 3°
ESLNR2030-30-03 0.3 3 6 2.5 30 2.86 2.4 75 32.6 33.5 34.5 36.2 -
ESLNR2030-8-05 0.5 3 6 2.5 8 2.86 5.8 55 9 9.3 9.5 9.8 10.8
ESLNR2030-12-05 0.5 3 6 2.5 12 2.86 4.6 60 13.1 13.5 13.9 14.6 16.2
ESLNR2030-16-05 0.5 3 6 2.5 16 2.86 3.8 60 17.7 18.2 18.7 19.4 21.5
ESLNR2030-20-05 0.5 3 6 2.5 20 2.86 3.2 65 21.8 22.4 23.1 24.2 26.8
ESLNR2030-30-05 0.5 3 6 2.5 30 2.86 2.4 75 32.6 33.5 34.5 36.1 -
ESLNR2030-35-05 0.5 3 6 2.5 35 2.86 2.1 80 37.7 38.7 40.2 42.1 -
Effective neck L2
length
Rake ang
gle
○ ◎ ◎ ○
108 KORLOY
EST
STNR 2 Flutes tapered neck type radius endmill
t50-&3"/$&
ØD Ød
ULTRA 30 R AlTiN
DATA
All sizes p.469~470
3 4
θ2 θ
1 (B.T:1.5~6°)
R
App.L
2
(mm)

Designation
ESTNR2002-2-09005 0.05 0.2 4 0.15 2 0.9 0.17 0.23 1.1 10 50 - 2.8 3.1 3.4 3.9
ESTNR2004-4-09005 0.05 0.4 4 0.3 4 0.9 0.37 0.49 1.25 8.4 50 - 4.9 5.3 5.7 6.3
ESTNR2004-5-09005 0.05 0.4 4 0.3 5 0.9 0.37 0.52 1.25 7.8 50 - 5.9 6.4 6.8 7.5
ESTNR2004-4-0901 0.1 0.4 4 0.3 4 0.9 0.37 0.49 1.25 8.5 50 - 4.9 5.3 5.7 6.3
ESTNR2004-5-0901 0.1 0.4 4 0.3 5 0.9 0.37 0.52 1.25 7.9 50 - 5.9 6.4 6.8 7.5
ESTNR2005-5-0901 0.1 0.5 4 0.35 5 0.9 0.47 0.62 1.3 7.8 50 - 5.9 6.4 6.8 7.5
ESTNR2005-8-0901 0.1 0.5 4 0.35 8 0.9 0.47 0.71 1.3 6.4 50 - 9 9.7 10.2 11
ESTNR2005-10-0901 0.1 0.5 4 0.35 10 0.9 0.47 0.77 1.3 5.8 55 - 11 11.8 12.4 13.2
ESTNR2006-12-0901 0.1 0.6 4 0.4 12 0.9 0.57 0.93 1.35 5.1 55 - 13 13.9 14.5 15.5
ESTNR2006-15-0901 0.1 0.6 4 0.4 15 0.9 0.57 13 1.35 4.5 55 - 16.1 17.1 17.8 18.8
ESTNR2008-6-0402 0.2 0.8 4 0.5 6 0.4 0.77 0.85 2.64 7 50 6.6 7.1 7.5 7.8 8.3
ESTNR2008-12-0902 0.2 0.8 4 0.5 12 0.9 0.77 1.13 1.45 5 55 - 13 13.9 14.5 15.5
ESTNR2010-8-0402 0.2 1 6 0.8 8 0.4 0.94 14 5.09 7.4 55 8.8 9.3 9.7 10.1 10.6
ESTNR2010-10-0902 0.2 1 6 0.8 10 0.9 0.94 1.23 5.09 6.8 55 - 11.2 11.9 12.4 13.3
ESTNR2010-15-0902 0.2 1 6 0.8 15 0.9 0.94 1.39 2.7 5.6 60 - 16.3 17.2 17.8 18.8
ESTNR2010-20-0902 0.2 1 6 0.8 20 0.9 0.94 1.54 2.7 4.8 65 - 21.3 22.4 23.2 24.7
ESTNR2010-25-0902 0.2 1 6 0.8 25 0.9 0.94 1.7 2.7 4.1 70 - 26.4 27.6 28.5 30.9
ESTNR2010-30-0902 0.2 1 6 0.8 30 0.9 0.94 1.86 2.7 3.7 75 - 31.5 32.8 33.7 37
ESTNR2010-35-0902 0.2 1 6 0.8 35 0.9 0.94 22 2.7 3.3 80 - 36.5 38 39 43.2
ESTNR2010-8-0403 0.3 1 6 0.8 8 0.4 0.94 14 2.7 7.4 55 8.8 9.3 9.7 10 10.6
ESTNR2010-15-0903 0.3 1 6 0.8 15 0.9 0.94 1.39 2.7 5.6 60 - 16.3 17.2 17.8 18.8
ESTNR2010-25-0903 0.3 1 6 0.8 25 0.9 0.94 1.7 2.7 4.2 70 - 26.4 27.6 28.5 30.8
ESTNR2010-30-0903 0.3 1 6 0.8 30 0.9 0.94 1.86 2.7 3.7 75 - 31.5 32.8 33.7 37
ESTNR2015-10-0402 0.2 1.5 6 1.35 10 0.4 1.42 1.54 7.07 6.4 55 11 11.5 11.9 12.3 13
ESTNR2015-15-0902 0.2 1.5 6 1.35 15 0.9 1.42 1.85 7.07 5.3 60 - 16.4 17.3 17.9 18.9
ESTNR2015-20-0902 0.2 1.5 6 1.35 20 0.9 1.42 21 3.89 4.5 65 - 21.5 22.5 23.2 24.9
ESTNR2015-25-0902 0.2 1.5 6 1.35 25 0.9 1.42 2.16 3.89 3.9 70 - 26.6 27.7 28.5 31
ESTNR2015-30-0902 0.2 1.5 6 1.35 30 0.9 1.42 2.32 3.89 3.4 75 - 31.6 32.9 33.8 37.1
ESTNR2015-10-0403 0.3 1.5 6 1.35 10 0.4 1.42 1.54 3.89 6.4 55 11 11.5 11.9 12.3 13
ESTNR2015-20-0903 0.3 1.5 6 1.35 20 0.9 1.42 21 3.89 4.5 65 - 21.5 22.5 23.2 24.8
ESTNR2015-25-0903 0.3 1.5 6 1.35 25 0.9 1.42 2.16 3.89 3.9 70 - 26.5 27.7 28.5 31
ESTNR2015-30-0903 0.3 1.5 6 1.35 30 0.9 1.42 2.32 3.89 3.4 75 - 31.6 32.9 33.8 37.1
ESTNR2020-30-0902 0.2 2 6 1.7 30 0.9 1.92 2.81 7.42 3.1 70 - 31.6 32.9 33.8 37.2
ESTNR2020-40-0902 0.2 2 6 1.7 40 0.9 1.92 3.12 7.42 2.5 80 - 41.8 43.3 44.6 -
ESTNR2020-50-0902 0.2 2 6 1.7 50 0.9 1.92 3.44 7.42 2.1 90 - 51.9 53.6 55.7 -
ESTNR2020-12-0403 0.3 2 6 1.7 12 0.4 1.92 2.06 7.42 5.5 55 13 13.6 14.1 14.5 15.6
ESTNR2020-20-0903 0.3 2 6 1.7 20 0.9 1.92 2.5 4.24 4.1 65 - 21.5 22.5 23.2 24.9
ESTNR2020-30-0903 0.3 2 6 1.7 30 0.9 1.92 2.81 4.24 3.1 70 - 31.6 32.9 33.8 37.1
KORLOY
Y 109
Endmill
H-Star Endmill
EST
STNR 2 Flutes tapered neck type radius endmill
t50-&3"/$&
ØD Ød
ULTRA 30 R AlTiN
DATA
All sizes p.469~470
3 4
θ2 θ
1 (B.T:1.5~6°)
R
App.L
2
(mm)

Designation
ESTNR2020-40-0903 0.3 2 6 1.7 40 0.9 1.92 3.12 4.24 2.5 80 - 41.7 43.3 44.6 -
ESTNR2020-50-0903 0.3 2 6 1.7 50 0.9 1.92 3.44 4.24 2.1 90 - 51.8 53.6 55.7 -
ESTNR2020-8-0405 0.5 2 6 1.7 8 0.4 1.92 2.01 4.24 6.8 50 8.7 9 9.3 9.5 10.4
ESTNR2020-12-0405 0.5 2 6 1.7 12 0.4 1.92 2.06 4.24 5.6 55 13 13.6 14.1 14.4 15.5
ESTNR2020-16-0405 0.5 2 6 1.7 16 0.4 1.92 2.12 4.24 4.7 60 17 17.8 18.3 18.7 20.7
ESTNR2020-20-0905 0.5 2 6 1.7 20 0.9 1.92 2.5 4.24 4.2 65 - 21.5 22.5 23.2 24.8
ESTNR2020-25-0905 0.5 2 6 1.7 25 0.9 1.92 2.65 4.24 3.6 65 - 26.6 27.7 28.5 30.9
ESTNR2020-30-0905 0.5 2 6 1.7 30 0.9 1.92 2.81 4.24 3.1 70 - 31.6 32.9 33.8 37.1
ESTNR2020-40-0905 0.5 2 6 1.7 40 0.9 1.92 3.12 4.24 2.5 80 - 41.7 43.2 44.6 -
ESTNR2020-50-0905 0.5 2 6 1.7 50 0.9 1.92 3.44 4.24 2.1 90 - 51.8 53.6 55.6 -
ESTNR2030-40-0902 0.2 3 6 2.5 40 0.9 2.86 4.04 6.95 2 80 - 42 43.4 - -
ESTNR2030-50-0902 0.2 3 6 2.5 50 0.9 2.86 4.35 6.95 1.6 90 - 52.1 53.7 - -
ESTNR2030-60-0902 0.2 3 6 2.5 60 0.9 2.86 4.67 6.95 1.4 100 - 62.2 - - -
ESTNR2030-40-0903 0.3 3 6 2.5 40 0.9 2.86 4.04 6.95 2 80 - 42 43.4 - -
ESTNR2030-50-0903 0.3 3 6 2.5 50 0.9 2.86 4.35 6.95 1.7 90 - 52.1 53.7 - -
ESTNR2030-60-0903 0.3 3 6 2.5 60 0.9 2.86 4.67 6.95 1.4 100 - 62.2 - - -
ESTNR2030-40-0905 0.5 3 6 2.5 40 0.9 2.86 4.04 6.95 2 80 - 42 43.4 - -
ESTNR2030-50-0905 0.5 3 6 2.5 50 0.9 2.86 4.35 6.95 1.7 90 - 52.1 53.7 - -
ESTNR2030-60-0905 0.5 3 6 2.5 60 0.9 2.86 4.67 6.95 1.4 100 - 62.1 - - -
Effective neck L2
length
Rake ang
gle
○ ◎ ◎ ○
110 KORLOY
ESP
SPM4 4 Flutes neck type radius endmill
t50-&3"/$&
DATA ØD Ød
ULTRA 0 R
FINE
HELIX ±0.015
All sizes p.471
13°
R 2
(mm)
ESPM4030-05 0.5 3 6 1.2 8 50

ESPM4040-05 0.5 4 6 1.5 10 50
ESPM4060-05 0.5 6 6 2.5 12 60
ESPM4060-10 1 6 6 2.5 12 60
ESPM4060-15 1.5 6 6 2.5 12 60
ESPM4060-15L 1.5 6 6 2.5 12 90
ESPM4080-10 1 8 8 3.5 16 60
ESPM4080-20 2 8 8 3.5 16 60
ESPM4080-20L 2 8 8 3.5 16 100
ESPM4100-10 1 10 10 4 20 70
ESPM4100-20 2 10 10 4 20 70
ESPM4100-20L 2 10 10 4 20 100
ESPM4120-20 2 12 12 5 25 80
ESPM4120-30 3 12 12 5 25 80
ESPM4120-30L 3 12 12 5 25 110
○ ◎ ◎ ○
KORLOY
Y 111
For mold & die
U-Star Endmill
t Carbide Endmill for HRC30~50 medium hardness steel and die steel cutting
t Enhanced wear resistance, anti-oxidation and lubrication by applying AlCrN series coating layer
Features
t Enhanced cutting edge strength of ball Endmill applying ultra-fine substrate (PC303W)
t Higher chipping resistance of flat Endmill applying high toughness substrate (PC315W)
t Various shaped line-ups for complicated mold machining
t Suitable for precision cutting with high precision tolerance of h5 shank, flute and radius
t Edge treatment
t Applying S-curved gash shape
After Before
- Enhanced chipping resistance in the

beginning of cutting
- Guiding stable cutting for managing the
properties of mold machining
- Increased cutting performance and wear

resistance due to dispersing cutting force
t Applying substrate for medium

hardness steel cutting t AlCrN base new coating
- Separating the substrate (PC303W

and PC315W) maximizes the features - Increased wear resistance and oxidation
of tool and ensures general use. resistance by multi layer
- Enhanced lubrication with Cr containing
- Stable cutting under frictional heat
112 KORLOY
Tool selection guide
A-Star
Endmill
D Endmill
Composite
Router Endmill
U-Star Endmill
S-Star Super Endmill H-Star
G-Star Endmill For Ti
Endmill Super Endmill Endmill
Super Endmill For HRSA S-Star
For Ti Endmill
P K M S H N
Carbon steel, Cast iron Stainless steel Inconel718, Titanium High hardened Non-ferrous Graphite Composite
Alloy steel Waspaloy, alloy materials
Hastelloy (CFRP/GFRP)
Code system
U R 5 1 2 030 10 25 100 S3
U-Star Endmill Grade No. of flute Corner R Overall length
5 : Grade 2 : 2 flute 005 : 0.05 mm 50 : 50 mm
3 : 3 flute 010 : 0.10 mm 100 : 100 mm
4 : 4 flute 020 : 0.20 mm 150 : 150 mm
5 : 5 flute
Type 6 : 6 flute
B : Ball
Length, Tool dia. Effective length Shank dia.
SB : Staright ball
Shank type 010 : Ø1.0 mm 005 : 0.5 mm S3 : Ø3 mm
E : Flat
R : Radius 0 : Straight 060 : Ø6.0 mm 10 : 10 mm S6 : Ø6 mm
SPM : High feed 1 : Neck 250 : Ø25.0 mm 50 : 50 mm S20 : Ø20 mm
XE : Heavy cut flat 2 : Long shank
XR : Multi helix radius 3 : Lollipop
TE : Taper flat 4 : Taper neck
TR : Taper radius
TB : Taper ball
DR : Double radius
F : Roughing
LE : Flat (lathe)
KORLOY 113
Endmill
U-Star Endmill
EDP. NO Appearance Type Range Page
UE502 2 Flutes flat endmill Ø0.1 ~ 25.0 115~116
UE512 2 Flutes long neck flat endmill Ø0.1 ~ 12.0 117~119
UXE502 2 Flutes flat endmill for heavy cuts Ø0.1 ~ 20.0 122~123
UE504H 4 Flutes 45° helix flat endmill Ø1.0 ~ 20.0 124
UE514 4 Flutes long neck flat endmill Ø1.0 ~ 12.0 125~126
ULE504 4 Flutes automatic cnc flat endmill Ø3.0 ~ 16.0 129
UE504 4 Flutes flat endmill Ø0.8 ~ 25.0 130
UXE504 4 Flutes flat endmill for heavy cuts Ø1.0 ~ 20.0 131
UE506 6 Flutes flat endmill Ø6.0 ~ 20.0 132
UTE502 2 Flutes tapered flat endmill Ø0.3 ~ 10.0 133~134
UTE504 4 Flutes tapered flat endmill Ø0.8 ~ 10.0 135~137
UR502 2 Flutes radius endmill Ø0.2 ~ 20.0 138~140
UR512 2 Flutes neck type radius endmill Ø0.2 ~ 20.0 141~146
UR542 2 Flutes tapered neck radius endmill Ø0.2 ~ 4.0 147~152
UR504 4 Flutes radius endmill Ø3.0 ~ 20.0 153
UR544 4 Flutes tapered neck radius endmill Ø1.0 ~ 4.0 154~157
UXR504 4 Flutes multi helix radius endmill Ø1.0 ~ 20.0 158~160
UXR514 4 Flutes multi helix neck radius endmill Ø1.0 ~ 20.0 161~165
UR506 6 Flutes radius endmill Ø6.0 ~ 20.0 166
UDR503 3 Flutes double radius endmill Ø6.0 ~ 20.0 167
USPM4 4 Flutes radius endmill for high speed machining Ø1.0 ~ 20.0 168
UTR504 4 Flutes tapered radius endmill Ø0.8 ~ 2.5 169~172
UB502 2 Flutes ball endmill Ø1.0 ~ 25.0 173~174
UB502---P 2 Flutes high precision ball endmill Ø0.1 ~ 12.0 175
UB512 2 Flutes long neck ball endmill Ø0.1 ~ 12.0 176~179
UB512S6 2 Flutes long neck ball endmill (shank 6) Ø0.5 ~ 2.0 180
UB532 2 Flutes lollipop style ball endmill Ø3.0 ~ 12.0 181
UB542 2 Flutes tapered neck ball endmill Ø0.1 ~ 12.0 182~188
USB502 2 Flutes straight ball endmill Ø3.0 ~ 20.0 189
UB503 3 Flutes ball endmill Ø1.0 ~ 12.0 190
UB504 4 Flutes ball endmill Ø1.0 ~ 12.0 191
UTB502 2 Flutes tapered ball endmill Ø0.3 ~ 2.0 192
UF50 3~5 Flutes chamfer pitch roughing endmill Ø3.0 ~ 25.0 193
UF51 3~5 Flutes fine pitch roughing endmill Ø3.0 ~ 25.0 194
UF51---H 3~5 Flutes 45° helix fine pitch roughing endmill Ø3.0 ~ 25.0 195
114 KORLOY
UE5
E502 t50-&3"/$&
DATA ØD Ød
CARBIDE 30 AlCrN Ø0.1 ~ Ø6 0 ~ -0.012mm
h5
HELIX Ø6.5 ~ Ø25 0 ~ -0.015mm
p.472

(mm)
UE502001S3 0.1 3 0.2 40 UE502015S3 1.5 3 4 50

UE502001 0.1 4 0.2 40 UE502015S4 1.5 4 4 50
UE5020015 0.15 4 0.3 40 UE502015 1.5 6 4 50
UE502002S3 0.2 3 0.4 40 UE502016S4 1.6 4 4 50
UE502002 0.2 4 0.4 40 UE502017S4 1.7 4 4 50
UE5020025 0.25 4 0.5 40 UE502018S4 1.8 4 5 50
UE502003S3 0.3 3 0.6 40 UE502019S4 1.9 4 5 50
UE502003 0.3 4 0.6 40 UE502020S3 2 3 6 50
UE5020035 0.35 4 0.7 40 UE502020S4 2 4 6 50
UE502004S3 0.4 3 0.8 40 UE502020 2 6 6 50
UE502004 0.4 4 0.8 40 UE502021S4 2.1 4 6 50
UE5020045 0.45 4 0.9 40 UE502022S4 2.2 4 6 50
UE502005S3 0.5 3 1 40 UE502023S4 2.3 4 6 50
UE502005 0.5 4 1 40 UE502024S4 2.4 4 6 50
UE5020055 0.55 4 1.1 40 UE502025S3 2.5 3 7 50
UE502006S3 0.6 3 1.2 40 UE502025 2.5 6 7 50
UE502006 0.6 4 1.2 40 UE502025S4 2.5 4 8 50
UE5020065 0.65 4 1.3 40 UE502026S4 2.6 4 8 50
UE502007S3 0.7 3 1.4 40 UE502027S4 2.7 4 8 50
UE502007 0.7 4 1.4 40 UE502028S4 2.8 4 8 50
UE5020075 0.75 4 1.5 40 UE502029S4 2.9 4 8 50
UE502008S3 0.8 3 1.6 40 UE502030S3 3 3 8 50
UE502008 0.8 4 1.6 40 UE502030S4 3 4 8 50
UE5020085 0.85 4 1.7 40 UE502030 3 6 8 50
UE502009S3 0.9 3 1.8 40 UE502035S4 3.5 4 10 50
UE502009 0.9 4 1.8 40 UE502035 3.5 6 10 50
UE5020095 0.95 4 2 40 UE502040080S4 4 4 10 80
UE502010S3 1 3 2.5 50 UE502040S4 4 4 10 50
UE502010S4 1 4 2.5 50 UE502040 4 6 10 50
UE502010 1 6 2.5 50 UE502045 4.5 6 14 50
UE502011S4 1.1 4 3 50 UE502050 5 6 15 60
UE502012S3 1.2 3 3 50 UE502055 5.5 6 15 60
UE502012S4 1.2 4 3 50 UE502060 6 6 15 60
UE502012 1.2 6 3 50 UE502065 6.5 8 18 60
UE502013S4 1.3 4 3 50 UE502070 7 8 20 60
UE502014S4 1.4 4 4 50 UE502075 7.5 8 20 60
KORLOY
Y 115
Endmill
U-Star Endmill
UE5
E502 t50-&3"/$&
DATA ØD Ød
h5
HELIX Ø6.5 ~ Ø25 0 ~ -0.015mm
p.472

UE502080 8 8 20 70 UE502150 15 16 38 100

UE502085 8.5 10 22 70 UE502160 16 16 40 100
UE502090 9 10 22 70 UE502170 17 16 42 100
UE502095 9.5 10 24 70 UE502180 18 18 45 100
UE502100 10 10 25 75 UE502180S16 18 16 45 100
UE502105 10.5 12 26 75 UE502190 19 20 45 100
UE502110 11 12 30 75 UE502200 20 20 45 100
UE502115 11.5 12 30 80 UE502210 21 20 45 100
UE502120 12 12 30 80 UE502220 22 20 45 100
UE502130 13 12 35 100 UE502230 23 25 50 120
UE502140S16 14 16 35 100 UE502240 24 25 50 120
UE502140 14 14 35 100 UE502250 25 25 50 120
UE502140S12 14 12 35 100
Carbon steel Alloy steel Pre-hardened steel Hardened steel Cast iron Stainless
Aluminum Ti-Alloy Ni-Alloy
~ HB225 HB225~325 HRC30~50 SKD61~HRC55 SKD11 HRC55~ ~FCD500 steel
○ ◎ ◎ ○ ○
116 KORLOY
UE5
E512 2 Flutes long neck flat endmill
t50-&3"/$&
DATA ØD Ød
h5
HELIX Ø8 ~ Ø12 0 ~ -0.015mm
p.473~477

(mm)
UE512001003 0.1 4 0.15 0.3 40 UE51200602 0.6 4 0.9 2 45

UE512001005 0.1 4 0.15 0.5 40 UE51200603 0.6 4 0.9 3 45
UE51200101 0.1 4 0.15 1 40 UE51200604 0.6 4 0.9 4 45
UE512002005 0.2 4 0.3 0.5 40 UE51200605 0.6 4 0.9 5 45
UE51200201 0.2 4 0.3 1 40 UE51200606 0.6 4 0.9 6 45
UE512002015 0.2 4 0.3 1.5 40 UE51200608 0.6 4 0.9 8 45
UE51200202 0.2 4 0.3 2 40 UE51200610 0.6 4 0.9 10 45
UE51200301 0.3 4 0.5 1 40 UE51200612 0.6 4 0.9 12 45
UE512003015 0.3 4 0.5 1.5 40 UE51200614 0.6 4 0.9 14 45
UE51200302 0.3 4 0.5 2 40 UE51200616 0.6 4 0.9 16 45
UE512003025 0.3 4 0.5 2.5 40 UE51200702 0.7 4 1.2 2 45
UE51200303 0.3 4 0.5 3 40 UE51200704 0.7 4 1.2 4 45
UE51200304 0.3 4 0.5 4 40 UE51200706 0.7 4 1.2 6 45
UE51200305 0.3 4 0.5 5 40 UE51200708 0.7 4 1.2 8 45
UE51200401 0.4 4 0.6 1 40 UE51200710 0.7 4 1.2 10 45
UE512004015 0.4 4 0.6 1.5 40 UE51200712 0.7 4 1.2 12 45
UE51200402 0.4 4 0.6 2 40 UE51200802 0.8 4 1.2 2 45
UE512004025 0.4 4 0.6 2.5 40 UE51200803 0.8 4 1.2 3 45
UE51200403 0.4 4 0.6 3 40 UE51200804 0.8 4 1.2 4 45
UE51200404 0.4 4 0.6 4 40 UE51200805 0.8 4 1.2 5 45
UE51200405 0.4 4 0.6 5 40 UE51200806 0.8 4 1.2 6 45
UE51200406 0.4 4 0.6 6 40 UE51200808 0.8 4 1.2 8 45
UE51200408 0.4 4 0.6 8 40 UE51200810 0.8 4 1.2 10 45
UE51200410 0.4 4 0.6 10 40 UE51200812 0.8 4 1.2 12 45
UE51200501 0.5 4 0.7 1 45 UE51200814 0.8 4 1.2 14 45
UE512005015 0.5 4 0.7 1.5 45 UE51200816 0.8 4 1.2 16 45
UE51200502 0.5 4 0.7 2 45 UE51200820 0.8 4 1.2 20 45
UE512005025 0.5 4 0.7 2.5 45 UE51200906 0.9 4 1.3 6 45
UE51200503 0.5 4 0.7 3 45 UE51200908 0.9 4 1.3 8 45
UE51200504 0.5 4 0.7 4 45 UE51200910 0.9 4 1.3 10 45
UE51200505 0.5 4 0.7 5 45 UE51201002 1 4 1.5 2 50
UE51200506 0.5 4 0.7 6 45 UE51201003 1 4 1.5 3 50
UE51200508 0.5 4 0.7 8 45 UE51201004 1 4 1.5 4 50
UE51200510 0.5 4 0.7 10 45 UE51201005 1 4 1.5 5 50
UE51200512 0.5 4 0.7 12 45 UE51201006 1 4 1.5 6 50
UE51200514 0.5 4 0.7 14 45 UE51201007 1 4 1.5 7 50
UE51200516 0.5 4 0.7 16 45 UE51201008 1 4 1.5 8 50
KORLOY
Y 117
Endmill
U-Star Endmill
UE5
t50-&3"/$&
DATA ØD Ød
h5
HELIX Ø8 ~ Ø12 0 ~ -0.015mm
p.473~477

(mm)
UE51201010 1 4 1.5 10 50 UE51201520 1.5 4 2.3 20 50

UE51201012 1 4 1.5 12 50 UE51201522 1.5 4 2.3 22 60
UE51201014 1 4 1.5 14 50 UE51201526 1.5 4 2.3 26 60
UE51201016 1 4 1.5 16 50 UE51201530 1.5 4 2.3 30 70
UE51201018 1 4 1.5 18 50 UE51201608 1.6 4 2.3 8 50
UE51201020 1 4 1.5 20 50 UE51201610 1.6 4 2.3 10 50
UE51201022 1 4 1.5 22 60 UE51201612 1.6 4 2.3 12 50
UE51201026 1 4 1.5 26 60 UE51201616 1.6 4 2.3 16 50
UE51201030 1 4 1.5 30 70 UE51201620 1.6 4 2.3 20 50
UE51201040 1 4 1.5 40 80 UE51201808 1.8 4 2.7 8 50
UE51201050 1 4 1.5 50 100 UE51201810 1.8 4 2.7 10 50
UE51201204 1.2 4 1.8 4 50 UE51201812 1.8 4 2.7 12 50
UE51201206 1.2 4 1.8 6 50 UE51201816 1.8 4 2.7 16 50
UE51201208 1.2 4 1.8 8 50 UE51201820 1.8 4 2.7 20 50
UE51201210 1.2 4 1.8 10 50 UE51202006 2 4 3 6 50
UE51201212 1.2 4 1.8 12 50 UE51202008 2 4 3 8 50
UE51201214 1.2 4 1.8 14 50 UE51202010 2 4 3 10 50
UE51201216 1.2 4 1.8 16 50 UE51202012 2 4 3 12 50
UE51201220 1.2 4 1.8 20 50 UE51202014 2 4 3 14 50
UE51201226 1.2 4 1.8 26 60 UE51202016 2 4 3 16 50
UE51201230 1.2 4 1.8 30 70 UE51202018 2 4 3 18 50
UE51201406 1.4 4 2.1 6 50 UE51202020 2 4 3 20 50
UE51201408 1.4 4 2.1 8 50 UE51202022 2 4 3 22 60
UE51201410 1.4 4 2.1 10 50 UE51202026 2 4 3 26 60
UE51201414 1.4 4 2.1 14 50 UE51202030 2 4 3 30 70
UE51201416 1.4 4 2.1 16 50 UE51202035 2 4 3 35 70
UE51201420 1.4 4 2.1 20 50 UE51202040 2 4 3 40 80
UE51201504 1.5 4 2.3 4 50 UE51202045 2 4 3 45 90
UE51201505 1.5 4 2.3 5 50 UE51202050 2 4 3 50 100
UE51201506 1.5 4 2.3 6 50 UE51202060 2 4 3 60 110
UE51201507 1.5 4 2.3 7 50 UE51202508 2.5 4 4 8 50
UE51201508 1.5 4 2.3 8 50 UE51202510 2.5 4 4 10 50
UE51201510 1.5 4 2.3 10 50 UE51202512 2.5 4 4 12 50
UE51201512 1.5 4 2.3 12 50 UE51202514 2.5 4 4 14 50
UE51201514 1.5 4 2.3 14 50 UE51202516 2.5 4 4 16 50
UE51201516 1.5 4 2.3 16 50 UE51202518 2.5 4 4 18 50
UE51201518 1.5 4 2.3 18 50 UE51202520 2.5 4 4 20 50
118 KORLOY
UE5
t50-&3"/$&
DATA ØD Ød
h5
HELIX Ø8 ~ Ø12 0 ~ -0.015mm
p.473~477

(mm)
2.5 4 4 22 60 UE51204022 4 6 6 22 65
UE51202526 2.5 4 4 26 60 UE51204026 4 6 6 26 65
UE51202530 2.5 4 4 30 70 UE51204030 4 6 6 30 70
UE51202535 2.5 4 4 35 70 UE51204035 4 6 6 35 70
UE51202540 2.5 4 4 40 80 UE51204040 4 6 6 40 80
UE51202545 2.5 4 4 45 90 UE51204045 4 6 6 45 90
UE51202550 2.5 4 4 50 100 UE51204050 4 6 6 50 100
UE51203006 3 6 4.5 6 50 UE51204060 4 6 6 60 100
UE51203008 3 6 4.5 8 50 UE51205016 5 6 8 16 60
UE51203010 3 6 4.5 10 50 UE51205020 5 6 8 20 60
UE51203012 3 6 4.5 12 50 UE51205026 5 6 8 26 65
UE51203014 3 6 4.5 14 60 UE51205030 5 6 8 30 70
UE51203016 3 6 4.5 16 60 UE51205035 5 6 8 35 75
UE51203018 3 6 4.5 18 60 UE51205040 5 6 8 40 80
UE51203020 3 6 4.5 20 60 UE51205050 5 6 8 50 90
UE51203022 3 6 4.5 22 65 UE51205060 5 6 8 60 100
UE51203026 3 6 4.5 26 65 UE51206015 6 6 9 15 60
UE51203030 3 6 4.5 30 70 UE51206020 6 6 9 20 60
UE51203035 3 6 4.5 35 70 UE51206030 6 6 9 30 70
UE51203040 3 6 4.5 40 80 UE51206032 6 6 9 32 90
UE51203045 3 6 4.5 45 90 UE51208025 8 8 12 25 70
UE51203050 3 6 4.5 50 100 UE51208030 8 8 12 30 80
UE51203060 3 6 4.5 60 100 UE51208042 8 8 12 42 100
UE51204008 4 6 6 8 50 UE51210030 10 10 15 30 75
UE51204010 4 6 6 10 50 UE51210035 10 10 15 35 80
UE51204012 4 6 6 12 50 UE51210045 10 10 15 45 100
UE51204014 4 6 6 14 60 UE51212035 12 12 20 35 80
UE51204016 4 6 6 16 60 UE51212040 12 12 20 40 90
UE51204018 4 6 6 18 60 UE51212050 12 12 20 50 110
UE51204020 4 6 6 20 60
○ ◎ ◎ ○ ○
KORLOY
Y 119
Endmill
U-Star Endmill
UE5
E522 t50-&3"/$&
DATA ØD Ød
h5
HELIX Ø6.5 ~ Ø25 0 ~ -0.015mm
p.478

(mm)
UE52201003 1 6 3 60 UE52204012 4 6 12 70
UE52201004 1 6 4 60 UE52204016 4 6 16 70
UE52201005 1 6 5 60 UE52204020 4 6 20 70
UE52201006 1 6 6 60 UE52204020S4 4 4 20 100
UE52201007 1 6 7 60 UE52204026 4 6 26 70
UE52201008 1 6 8 60 UE52204030 4 6 30 70
UE52201010 1 6 10 60 UE52205015 5 6 15 70
UE52201012 1 6 12 60 UE52205020 5 6 20 70
UE52201204 1.2 6 4 60 UE52205025100 5 6 25 100
UE52201206 1.2 6 6 60 UE52205025 5 6 25 70
UE52201208 1.2 6 8 60 UE52205030 5 6 30 80
UE52201210 1.2 6 10 60 UE52205035 5 6 35 90
UE52201212 1.2 6 12 60 UE52205040 5 6 40 100
UE52201506 1.5 6 6 60 UE52206015080 6 6 15 80
UE52201508 1.5 6 8 60 UE52206015 6 6 15 60
UE52201510 1.5 6 10 60 UE52206020090 6 6 20 90
UE52201512 1.5 6 12 60 UE52206020 6 6 20 70
UE52201514 1.5 6 14 60 UE52206025 6 6 25 75
UE52201516 1.5 6 16 60 UE52206030150 6 6 30 150
UE52202008 2 6 8 60 UE52206030100 6 6 30 100
UE52202010 2 6 10 60 UE52206030 6 6 30 80
UE52202012 2 6 12 60 UE52206035 6 6 35 90
UE52202014 2 6 14 60 UE52206040120 6 6 40 120
UE52202016 2 6 16 60 UE52206040 6 6 40 90
UE52202510 2.5 6 10 60 UE52206045 6 6 45 150
UE52202512 2.5 6 12 60 UE52207035 7 8 35 85
UE52202516 2.5 6 16 60 UE52208020 8 8 20 100
UE52202520 2.5 6 20 60 UE52208025 8 8 25 80
UE52202526 2.5 6 26 60 UE52208030100 8 8 30 100
UE52203010 3 6 10 70 UE52208030 8 8 30 80
UE52203012 3 6 12 70 UE52208035 8 8 35 90
UE52203014 3 6 14 70 UE52208040150 8 8 40 150
UE52203016 3 6 16 70 UE52208040120 8 8 40 120
UE52203016S3 3 3 16 100 UE52208040 8 8 40 90
UE52203020 3 6 20 70 UE52208045 8 8 45 100
UE52203026 3 6 26 70 UE52208050150 8 8 50 150
UE52203030 3 6 30 70 UE52208050 8 8 50 100
120 KORLOY
UE5
E522 t50-&3"/$&
DATA ØD Ød
h5
HELIX Ø6.5 ~ Ø25 0 ~ -0.015mm
p.478

(mm)
UE52209045 9 10 45 100 UE52214060 14 16 60 120

UE52210025 10 10 25 100 UE52216040150 16 16 40 150
UE52210030100 10 10 30 100 UE52216040 16 16 40 120
UE52210030 10 10 30 80 UE52216050150 16 16 50 150
UE52210035 10 10 35 90 UE52216050 16 16 50 110
UE52210040120 10 10 40 120 UE52216060 16 16 60 120
UE52210040 10 10 40 90 UE52216070200 16 16 70 200
UE52210045 10 10 45 100 UE52216070150 16 16 70 150
UE52210050200 10 10 50 200 UE52216070 16 16 70 130
UE52210050150 10 10 50 150 UE52216080 16 16 80 150
UE52210050 10 10 50 100 UE52216090 16 16 90 150
UE52210055 10 10 55 150 UE522160110 16 16 110 200
UE52210060200 10 10 60 200 UE522160120 16 16 120 250
UE52210060155 10 10 60 155 UE52218050 18 20 50 120
UE52210060 10 10 60 110 UE52218060 18 18 60 120
UE52211050 11 12 50 110 UE52218070 18 20 70 130
UE52212035 12 12 35 90 UE522180100 18 20 100 200
UE52212040120 12 12 40 120 UE52220050150 20 20 50 150
UE52212040 12 12 40 100 UE52220050 20 20 50 110
UE52212045 12 12 45 130 UE52220060 20 20 60 130
UE52212050150 12 12 50 150 UE52220070 20 20 70 130
UE52212050 12 12 50 100 UE52220080 20 20 80 150
UE52212055 12 12 55 110 UE52220090200 20 20 90 200
UE52212060200 12 12 60 200 UE52220090 20 20 90 150
UE52212060150 12 12 60 150 UE522200110 20 20 110 200
UE52212060 12 12 60 110 UE522200120 20 20 120 250
UE52212065 12 12 65 150 UE52222075 22 20 75 150
UE52212070200 12 12 70 200 UE522220110 22 20 110 200
UE52212070 12 12 70 120 UE52225070 25 25 70 150
UE52214040 14 16 40 110 UE52225090 25 25 90 150
UE52214050 14 16 50 110 UE522250110 25 25 110 200
UE52214060150 14 16 60 150 UE522250120 25 25 120 250
○ ◎ ◎ ○ ○
KORLOY
Y 121
Endmill
U-Star Endmill
UXE
XE502 2 Flutes flat endmill for heavy cuts
t50-&3"/$&
DATA ØD Ød
h5
HELIX Ø8 ~ Ø20 0 ~ -0.015mm
p.472

(mm)
UXE502001001 0.1 4 0.1 40 UXE502015015 1.5 6 1.5 40

UXE502001 0.1 4 0.2 40 UXE50201503 1.5 6 3 40
UXE502001003 0.1 4 0.3 40 UXE502015 1.5 6 4 50
UXE502002002 0.2 4 0.2 40 UXE50201506 1.5 6 6 50
UXE502002 0.2 4 0.4 40 UXE50201508 1.5 6 8 50
UXE502002006 0.2 4 0.6 40 UXE50201510 1.5 6 10 50
UXE502003003 0.3 4 0.3 40 UXE50202002 2 6 2 40
UXE502003 0.3 4 0.6 40 UXE50202004 2 6 4 40
UXE502003009 0.3 4 0.9 40 UXE502020 2 6 6 50
UXE502004004 0.4 4 0.4 40 UXE50202008 2 6 8 50
UXE502004 0.4 4 0.8 40 UXE50202010 2 6 10 50
UXE502004012 0.4 4 1.2 40 UXE50202012 2 6 12 50
UXE502005005 0.5 4 0.5 40 UXE502025025 2.5 6 2.5 40
UXE502005 0.5 4 1 40 UXE50202505 2.5 6 5 40
UXE502005015 0.5 4 1.5 40 UXE502025 2.5 6 7 50
UXE502006006 0.6 4 0.6 40 UXE50202510 2.5 6 10 50
UXE502006 0.6 4 1.2 40 UXE50202512 2.5 6 12 50
UXE502006018 0.6 4 1.8 40 UXE50203003 3 6 3 40
UXE502007007 0.7 4 0.7 40 UXE50203006 3 6 6 40
UXE502007 0.7 4 1.4 40 UXE502030 3 6 8 50
UXE502007021 0.7 4 2.1 40 UXE50203010 3 6 10 50
UXE502008008 0.8 4 0.8 40 UXE50203012 3 6 12 50
UXE502008 0.8 4 1.6 40 UXE50203014 3 6 14 50
UXE502008024 0.8 4 2.4 40 UXE50203510 3.5 6 10 50
UXE502009009 0.9 4 0.9 40 UXE50204004 4 6 4 40
UXE502009 0.9 4 1.8 40 UXE50204008 4 6 8 40
UXE502009027 0.9 4 2.7 40 UXE502040 4 6 10 50
UXE50201001 1 6 1 40 UXE50204012 4 6 12 50
UXE50201002 1 6 2 40 UXE50204014 4 6 14 50
UXE502010 1 6 2.5 50 UXE50204016 4 6 16 50
UXE50201003 1 6 3 50 UXE50204511 4.5 6 11 50
UXE50201004 1 6 4 50 UXE50205005 5 6 5 50
UXE50201006 1 6 6 50 UXE50205010 5 6 10 50
UXE50201202 1.2 6 2 40 UXE502050 5 6 15 60
UXE502012 1.2 6 3 50 UXE50205020 5 6 20 60
UXE50201204 1.2 6 4 50 UXE50205025 5 6 25 60
UXE50201206 1.2 6 6 50 UXE50205513 5.5 6 13 50
122 KORLOY
UXE
t50-&3"/$&
DATA ØD Ød
h5
HELIX Ø8 ~ Ø20 0 ~ -0.015mm
p.472

(mm)
UXE50206006 6 6 6 50 UXE502100 10 10 25 75
UXE50206012 6 6 12 50 UXE50210030 10 10 30 75
UXE502060 6 6 15 60 UXE50210035 10 10 35 75
UXE50206020 6 6 20 60 UXE50212026 12 12 26 70
UXE50206025 6 6 25 60 UXE502120 12 12 30 80
UXE50206513 6.5 8 13 60 UXE50212035 12 12 35 80
UXE50207018 7 8 18 60 UXE50212040 12 12 40 80
UXE50208016 8 8 16 60 UXE502140 14 16 35 100
UXE502080 8 8 20 70 UXE502160 16 16 32 100
UXE50208025 8 8 25 70 UXE50216040 16 16 40 100
UXE50208030 8 8 30 70 UXE502180 18 20 45 100
UXE50210022 10 10 22 65 UXE502200 20 20 45 100
○ ◎ ◎ ○ ○
KORLOY
Y 123
Endmill
U-Star Endmill
UE5
E504H 4 Flutes 45° helix flat endmill
t50-&3"/$&
DATA ØD Ød
CARBIDE 45 AlCrN
Ø1 ~ Ø20 0 ~ -0.03mm h5
HELIX
p.478

(mm)
UE504H010 1 6 2.5 50 UE504H06030 6 6 30 80

UE504H01004 1 6 4 60 UE504H080 8 8 20 70
UE504H01006 1 6 6 60 UE504H08030 8 8 30 80
UE504H015 1.5 6 4 50 UE504H08035 8 8 35 90
UE504H01506 1.5 6 6 60 UE504H08040 8 8 40 90
UE504H01508 1.5 6 8 60 UE504H100 10 10 25 75
UE504H020 2 6 6 50 UE504H10030 10 10 30 80
UE504H02008 2 6 8 60 UE504H10040 10 10 40 90
UE504H02010 2 6 10 60 UE504H10050 10 10 50 100
UE504H030 3 6 8 50 UE504H120 12 12 30 80
UE504H03010 3 6 10 70 UE504H12040 12 12 40 90
UE504H03012 3 6 12 70 UE504H12050 12 12 50 100
UE504H03016 3 6 16 70 UE504H12060 12 12 60 110
UE504H040 4 6 10 50 UE504H160 16 16 40 100
UE504H04012 4 6 12 70 UE504H16050 16 16 50 110
UE504H04016 4 6 16 70 UE504H16060 16 16 60 120
UE504H04020 4 6 20 70 UE504H160110 16 16 110 200
UE504H050 5 6 15 50 UE504H200 20 20 45 100
UE504H05030 5 6 30 80 UE504H20060 20 20 60 120
UE504H060 6 6 15 60 UE504H20070 20 20 70 130
UE504H06020 6 6 20 70 UE504H200110 20 20 110 200
○ ◎ ◎ ○ ○
124 KORLOY
UE5
t50-&3"/$&
DATA ØD Ød
CARBIDE 35 AlCrN
Ø1 ~ Ø12 0 ~ -0.03mm h5
HELIX
p.479

(mm)
1 4 1.5 2 50 UE51401518 1.5 4 2.3 18 50

UE51401003 1 4 1.5 3 50 UE51401520 1.5 4 2.3 20 50
UE51401004 1 4 1.5 4 50 UE51401522 1.5 4 2.3 22 60
UE51401005 1 4 1.5 5 50 UE51401526 1.5 4 2.3 26 60
UE51401006 1 4 1.5 6 50 UE51401530 1.5 4 2.3 30 70
UE51401007 1 4 1.5 7 50 UE51402006 2 4 3 6 50
UE51401008 1 4 1.5 8 50 UE51402008 2 4 3 8 50
UE51401010 1 4 1.5 10 50 UE51402010 2 4 3 10 50
UE51401012 1 4 1.5 12 50 UE51402012 2 4 3 12 50
UE51401014 1 4 1.5 14 50 UE51402014 2 4 3 14 50
UE51401016 1 4 1.5 16 50 UE51402016 2 4 3 16 50
UE51401018 1 4 1.5 18 50 UE51402018 2 4 3 18 50
UE51401020 1 4 1.5 20 50 UE51402020 2 4 3 20 50
UE51401022 1 4 1.5 22 60 UE51402022 2 4 3 22 60
UE51401026 1 4 1.5 26 60 UE51402026 2 4 3 26 60
UE51401030 1 4 1.5 30 70 UE51402030 2 4 3 30 70
UE51401040 1 4 1.5 40 80 UE51402035 2 4 3 35 70
UE51401050 1 4 1.5 50 100 UE51402040 2 4 3 40 80
UE51401204 1.2 4 1.8 4 50 UE51402045 2 4 3 45 90
UE51401206 1.2 4 1.8 6 50 UE51402050 2 4 3 50 100
UE51401208 1.2 4 1.8 8 50 UE51402060 2 4 3 60 110
UE51401210 1.2 4 1.8 10 50 UE51402508 2.5 4 4 8 50
UE51401212 1.2 4 1.8 12 50 UE51402510 2.5 4 4 10 50
UE51401214 1.2 4 1.8 14 50 UE51402512 2.5 4 4 12 50
UE51401216 1.2 4 1.8 16 50 UE51402514 2.5 4 4 14 50
UE51401220 1.2 4 1.8 20 50 UE51402516 2.5 4 4 16 50
UE51401226 1.2 4 1.8 26 60 UE51402518 2.5 4 4 18 50
UE51401230 1.2 4 1.8 30 70 UE51402520 2.5 4 4 20 50
UE51401504 1.5 4 2.3 4 50 UE51402522 2.5 4 4 22 60
UE51401505 1.5 4 2.3 5 50 UE51402526 2.5 4 4 26 60
UE51401506 1.5 4 2.3 6 50 UE51402530 2.5 4 4 30 70
UE51401507 1.5 4 2.3 7 50 UE51402535 2.5 4 4 35 70
UE51401508 1.5 4 2.3 8 50 UE51402540 2.5 4 4 40 80
UE51401510 1.5 4 2.3 10 50 UE51402545 2.5 4 4 45 90
UE51401512 1.5 4 2.3 12 50 UE51402550 2.5 4 4 50 100
UE51401514 1.5 4 2.3 14 50 UE51403006 3 6 4.5 6 50
UE51401516 1.5 4 2.3 16 50 UE51403008 3 6 4.5 8 50
KORLOY
Y 125
Endmill
U-Star Endmill
UE5
t50-&3"/$&
DATA ØD Ød
CARBIDE 35 AlCrN
Ø1 ~ Ø12 0 ~ -0.03mm h5
HELIX
p.479

(mm)
UE51403010 3 6 4.5 10 50 UE51404040 4 6 4.5 40 80

UE51403012 3 6 4.5 12 50 UE51404045 4 6 4.5 45 90
UE51403014 3 6 4.5 14 60 UE51404050 4 6 4.5 50 100
UE51403016 3 6 4.5 16 60 UE51404060 4 6 4.5 60 100
UE51403018 3 6 4.5 18 60 UE51405016 5 6 8 16 60
UE51403020 3 6 4.5 20 60 UE51405020 5 6 8 20 60
UE51403022 3 6 4.5 22 65 UE51405026 5 6 8 26 65
UE51403026 3 6 4.5 26 65 UE51405030 5 6 8 30 70
UE51403030 3 6 4.5 30 70 UE51405035 5 6 8 35 75
UE51403035 3 6 4.5 35 70 UE51405040 5 6 8 40 80
UE51403040 3 6 4.5 40 80 UE51405050 5 6 8 50 90
UE51403045 3 6 4.5 45 90 UE51405060 5 6 8 60 100
UE51403050 3 6 4.5 50 100 UE51406015 6 6 9 15 60
UE51403060 3 6 4.5 60 100 UE51406020 6 6 9 20 60
UE51404008 4 6 4.5 8 50 UE51406030 6 6 9 30 70
UE51404010 4 6 4.5 10 50 UE51406032 6 6 9 32 90
UE51404012 4 6 4.5 12 50 UE51408025 8 8 12 25 70
UE51404014 4 6 4.5 14 60 UE51408030 8 8 12 30 80
UE51404016 4 6 4.5 16 60 UE51408042 8 8 12 42 100
UE51404018 4 6 4.5 18 60 UE51410030 10 10 15 30 75
UE51404020 4 6 4.5 20 60 UE51410035 10 10 15 35 80
UE51404022 4 6 4.5 22 65 UE51410045 10 10 15 45 100
UE51404026 4 6 4.5 26 65 UE51412035 12 12 20 35 80
UE51404030 4 6 4.5 30 70 UE51412040 12 12 20 40 90
UE51404035 4 6 4.5 35 70 UE51412050 12 12 20 50 110
○ ◎ ◎ ○ ○
126 KORLOY
UE5
E524 t50-&3"/$&
DATA ØD Ød
CARBIDE 35 AlCrN
Ø1 ~ Ø25 0 ~ -0.03mm h5
HELIX
p.479

(mm)
UE52401003 1 6 3 60 UE52404012 4 6 12 70
UE52401004 1 6 4 60 UE52404016 4 6 16 70
UE52401005 1 6 5 60 UE52404020 4 6 20 70
UE52401006 1 6 6 60 UE52404020S4 4 4 20 100
UE52401007 1 6 7 60 UE52404026 4 6 26 70
UE52401008 1 6 8 60 UE52404030 4 6 30 70
UE52401010 1 6 10 60 UE52405015 5 6 15 70
UE52401012 1 6 12 60 UE52405020 5 6 20 70
UE52401204 1.2 6 4 60 UE52405025100 5 6 25 100
UE52401206 1.2 6 6 60 UE52405025 5 6 25 70
UE52401208 1.2 6 8 60 UE52405030 5 6 30 80
UE52401210 1.2 6 10 60 UE52405035 5 6 35 90
UE52401212 1.2 6 12 60 UE52405040 5 6 40 100
UE52401506 1.5 6 6 60 UE52406015080 6 6 15 80
UE52401508 1.5 6 8 60 UE52406015 6 6 15 60
UE52401510 1.5 6 10 60 UE52406020090 6 6 20 90
UE52401512 1.5 6 12 60 UE52406020 6 6 20 70
UE52401514 1.5 6 14 60 UE52406025 6 6 25 75
UE52401516 1.5 6 16 60 UE52406030150 6 6 30 150
UE52401520 1.5 6 20 60 UE52406030100 6 6 30 100
UE52401526 1.5 6 26 60 UE52406030 6 6 30 80
UE52402008 2 6 8 60 UE52406030100 6 6 30 100
UE52402008S4 2 4 8 40 UE52406030 6 6 30 80
UE52402010 2 6 10 60 UE52406035 6 6 35 90
UE52402012 2 6 12 60 UE52406040120 6 6 40 120
UE52402014 2 6 14 60 UE52406040 6 6 40 90
UE52402016 2 6 16 60 UE52406045 6 6 45 150
UE52402510 2.5 6 10 60 UE52407035 7 8 35 85
UE52402512 2.5 6 12 60 UE52408020 8 8 20 100
UE52402516 2.5 6 16 60 UE52408025 8 8 25 80
UE52402520 2.5 6 20 60 UE52408030100 8 8 30 100
UE52402526 2.5 6 26 60 UE52408030 8 8 30 80
UE52403010 3 6 10 70 UE52408035 8 8 35 90
UE52403012 3 6 12 70 UE52408040150 8 8 40 150
UE52403014 3 6 14 70 UE52408040120 8 8 40 120
UE52403016 3 6 16 70 UE52408040 8 8 40 90
UE52403016S3 3 3 16 100 UE52408045 8 8 45 100
UE52403020 3 6 20 70 UE52408050150 8 8 50 150
UE52403026 3 6 26 70 UE52408050 8 8 50 100
UE52403030 3 6 30 70 UE52408060 8 8 60 155
UE52403035 3 6 35 90 UE52408080 8 8 80 200
KORLOY
Y 127
Endmill
U-Star Endmill
UE5
E524 t50-&3"/$&
DATA ØD Ød
CARBIDE 35 AlCrN
Ø1 ~ Ø25 0 ~ -0.03mm h5
HELIX
p.479

(mm)
UE52409045 9 10 45 100 UE52416040 16 16 40 150

UE52410025 10 10 25 100 UE52416050150 16 16 50 150
UE524100100 10 10 30 100 UE52416050 16 16 50 110
UE52410030 10 10 30 80 UE52416060 16 16 60 120
UE52410035 10 10 35 90 UE52416070200 16 16 70 200
UE52410040120 10 10 40 120 UE52416070150 16 16 70 150
UE52410040 10 10 40 90 UE52416070 16 16 70 130
UE52410045 10 10 45 100 UE52416080 16 16 80 150
UE52410050200 10 10 50 200 UE52416090 16 16 90 150
UE52410050150 10 10 50 150 UE524160100 16 16 100 200
UE52410050 10 10 50 100 UE524160110 16 16 110 200
UE52410055 10 10 55 150 UE524160120 16 16 120 250
UE52410060200 10 10 60 200 UE52418050 18 20 50 120
UE52410060155 10 10 60 155 UE52418070 18 20 70 130
UE52410060 10 10 60 110 UE524180100 18 20 100 200
UE52410080200 10 10 80 200 UE52420050150 20 20 50 150
UE52411050 11 12 50 110 UE52420050 20 20 50 110
UE52412030 12 12 30 110 UE52420060 20 20 60 130
UE52412035 12 12 35 90 UE52420070 20 20 70 130
UE52412040120 12 12 40 120 UE52420080 20 20 80 150
UE52412040 12 12 40 100 UE52420090200 20 20 90 200
UE52412045 12 12 45 130 UE52420090 20 20 90 150
UE52412050150 12 12 50 150 UE524200100 20 20 100 200
UE52412050 12 12 50 100 UE524200110 20 20 110 200
UE52412055 12 12 55 110 UE524200120 20 20 120 250
UE52412060200 12 12 60 200 UE524200130 20 20 130 250
UE52412060150 12 12 60 150 UE52422075 22 20 75 150
UE52412060 12 12 60 110 UE524220110 22 20 110 200
UE52412065 12 12 65 150 UE52425070 25 25 70 150
UE52412070200 12 12 70 200 UE52425090 25 25 90 150
UE52412070 12 12 70 120 UE524250100 25 25 100 200
UE52412080 12 12 80 200 UE524250110 25 25 110 200
UE52414040 14 16 40 110 UE524250120 25 25 120 250
UE52414050 14 16 50 110 UE524250150 25 25 150 250
UE52414060 14 16 60 150
○ ◎ ◎ ○ ○
128 KORLOY
ULE5
LE504 4 Flutes automatic CNC flat endmill
t50-&3"/$&
DATA ØD Ød
CARBIDE 30 AlCrN
Ø3 ~ Ø16 0 ~ -0.02mm h5
HELIX
p.480

(mm)
ULE504030S04 3 4 3 35
ULE504040S04 4 4 4 35
ULE504060S06 6 6 6 35
ULE504070S07 7 7 20 45
ULE504080S08 8 8 8 45
ULE504080S06 8 6 8 35
ULE504080S07 8 7 15 45
ULE504090S07 9 7 15 45
ULE504100S06 10 6 10 35
ULE504100S10 10 10 15 45
ULE504100S07 10 7 15 45
ULE504110S07 11 7 15 45
ULE504120S10 12 10 12 45
ULE504120S06 12 6 12 35
ULE504120S07 12 7 15 45
ULE504120-25S10 12 10 25 55
ULE504130S10 13 10 25 55
ULE504140S10 14 10 25 55
ULE504140S07 14 7 25 55
ULE504160S10 16 10 25 60
○ ◎ ◎ ○ ○
KORLOY
Y 129
Endmill
U-Star Endmill
UE5
E504 t50-&3"/$&
DATA ØD Ød
CARBIDE 34 36 AlCrN
Ø0.8 ~ Ø25 0 ~ -0.03mm h5
HELIX HELIX
p.480

(mm)
UE504008 0.8 4 1.6 40 UE504105 10.5 12 26 75

UE504009 0.9 4 1.8 40 UE504110 11 12 30 75
UE504010 1 6 2.5 50 UE504115 11.5 12 30 80
UE504012 1.2 6 3 50 UE504120 12 12 30 80
UE504015 1.5 6 4 50 UE504125 12.5 12 30 80
UE504020 2 6 6 50 UE504130 13 12 35 100
UE504025 2.5 6 7 50 UE504140 14 16 35 100
UE504030 3 6 8 50 UE504140S14 14 14 35 100
UE504035 3.5 6 10 50 UE504140S12 14 12 35 100
UE504040 4 6 10 50 UE504150 15 16 38 100
UE504045 4.5 6 14 50 UE504160 16 16 40 100
UE504050 5 6 15 60 UE504170 17 16 42 100
UE504055 5.5 6 15 60 UE504180 18 18 45 100
UE504060 6 6 15 60 UE504180S16 18 16 45 100
UE504065 6.5 8 18 60 UE504190 19 20 45 100
UE504070 7 8 20 60 UE504200 20 20 45 100
UE504075 7.5 8 20 60 UE504210 21 20 45 100
UE504080 8 8 20 70 UE504220 22 20 45 100
UE504085 8.5 10 22 70 UE504230 23 25 50 120
UE504090 9 10 22 70 UE504240 24 25 50 120
UE504095 9.5 10 24 70 UE504250 25 25 50 120
UE504100 10 10 25 75
○ ◎ ◎ ○ ○
130 KORLOY
UXE
t50-&3"/$&
DATA ØD Ød
CARBIDE 34 36 AlCrN
Ø1 ~ Ø25 0 ~ -0.03mm h5
HELIX HELIX
p.480

(mm)
ØD Ød ℓ L Designation ØD Ød ℓ L
UXE50401001 1 6 1 40 UXE50404004 4 6 4 40
UXE50401002 1 6 2 40 UXE50404008 4 6 8 40
UXE504010 1 6 2.5 50 UXE504040 4 6 10 50
UXE50401003 1 6 3 50 UXE50404012 4 6 12 50
UXE50401004 1 6 4 50 UXE50404014 4 6 14 50
UXE50401006 1 6 6 50 UXE50404016 4 6 16 50
UXE50401202 1.2 6 2 40 UXE50405005 5 6 5 50
UXE504012 1.2 6 3 50 UXE50405010 5 6 10 50
UXE50401204 1.2 6 4 50 UXE504050 5 6 15 60
UXE50401206 1.2 6 6 50 UXE50405020 5 6 20 60
UXE504015015 1.5 6 1.5 40 UXE50405025 5 6 25 60
UXE50401503 1.5 6 3 40 UXE50406006 6 6 6 50
UXE504015 1.5 6 4 50 UXE50406012 6 6 12 50
UXE50401506 1.5 6 6 50 UXE504060 6 6 15 60
UXE50401508 1.5 6 8 50 UXE50406020 6 6 20 60
UXE50401510 1.5 6 10 50 UXE50406025 6 6 25 60
UXE50402002 2 6 2 40 UXE50408016 8 8 16 60
UXE50402004 2 6 4 40 UXE504080 8 8 20 70
UXE504020 2 6 6 50 UXE50408025 8 8 25 70
UXE50402008 2 6 8 50 UXE50408030 8 8 30 70
UXE50402010 2 6 10 50 UXE50410022 10 10 22 65
UXE50402012 2 6 12 50 UXE504100 10 10 25 75
UXE504025025 2.5 6 2.5 40 UXE50410030 10 10 30 75
UXE50402505 2.5 6 5 40 UXE50410035 10 10 35 75
UXE504025 2.5 6 7 50 UXE50412026 12 12 26 70
UXE50402510 2.5 6 10 50 UXE504120 12 12 30 80
UXE50402512 2.5 6 12 50 UXE50412035 12 12 35 80
UXE50403003 3 6 3 40 UXE50412040 12 12 40 80
UXE50403006 3 6 6 40 UXE504140 14 16 35 100
UXE504030 3 6 8 50 UXE50416032 16 16 32 100
UXE50403010 3 6 10 50 UXE504160 16 16 40 100
UXE50403012 3 6 12 50 UXE504180 18 20 45 100
UXE50403014 3 6 14 50 UXE504200 20 20 45 100
○ ◎ ◎ ○ ○
KORLOY
Y 131
Endmill
U-Star Endmill
UE5
E506 t50-&3"/$&
6 Flutes flat end mill
DATA ØD Ød
CARBIDE 45 AlCrN
Ø6 ~ Ø25 0 ~ -0.03mm h5
HELIX
p.481

(mm)
ØD Ød ℓ L Designation ØD Ød ℓ L
UE506060 6 6 15 60 UE50612060150 12 12 60 150

UE50606020 6 6 20 70 UE50612060 12 12 60 110
UE50606030110 6 6 30 110 UE506130 13 14 32 85
UE50606030 6 6 30 80 UE506140 14 14 32 85
UE506070 7 8 18 60 UE506160 16 16 40 100
UE506080 8 8 20 70 UE50616050 16 16 50 110
UE50608030 8 8 30 80 UE50616060 16 16 60 120
UE50608035 8 8 35 90 UE50616090 16 16 90 150
UE50608040130 8 8 40 130 UE506160110250 16 16 110 250
UE50608040 8 8 40 90 UE506160110 16 16 110 200
UE506090 9 10 22 70 UE506180 18 18 44 100
UE506100 10 10 25 75 UE506200 20 20 45 100
UE50610030 10 10 30 80 UE50620060 20 20 60 120
UE50610040 10 10 40 90 UE50620070 20 20 70 130
UE50610050150 10 10 50 150 UE506200110300 20 20 110 300
UE50610050 10 10 50 100 UE506200110250 20 20 110 250
UE506110 11 12 26 75 UE506200110 20 20 110 200
UE506120 12 12 30 80 UE506250 25 25 50 120
UE50612040 12 12 40 90 UE506251 25 25 92 180
UE50612050 12 12 50 100
○ ◎ ◎ ○ ○
132 KORLOY
UTE
TE502 2 Flutes tapered flat endmill
t50-&3"/$&
DATA ØD Ød
CARBIDE 30 AlCrN
Ø1 ~ Ø12 0 ~ -0.03mm h5
HELIX
p.482

(mm)
Designation ØD Ød ℓ ѡ L Designation ØD Ød ℓ ѡ L
0.3 4 1.2 0.5 40 UTE50200703 0.7 4 2.8 3 45

UTE50200301 0.3 4 1.2 1 40 UTE50200705 0.7 4 3.5 5 45
UTE502003015 0.3 4 1.2 1.5 40 UTE50200707 0.7 4 3.5 7 45
UTE50200302 0.3 4 1.2 2 40 UTE50200710 0.7 4 3.5 10 45
UTE50200303 0.3 4 1.5 3 40 UTE502008005 0.8 4 3.2 0.5 45
UTE50200305 0.3 4 1.5 5 40 UTE50200801 0.8 4 3.2 1 45
UTE50200307 0.3 4 1.5 7 40 UTE502008015 0.8 4 3.2 1.5 45
UTE50200310 0.3 4 1.5 10 40 UTE50200802 0.8 4 3.2 2 45
UTE502004005 0.4 4 1.6 0.5 40 UTE50200803 0.8 4 3.2 3 45
UTE50200401 0.4 4 1.6 1 40 UTE50200805 0.8 4 4 5 45
UTE502004015 0.4 4 1.6 1.5 40 UTE50200807 0.8 4 4 7 45
UTE50200402 0.4 4 1.6 2 40 UTE50200810 0.8 4 4 10 45
UTE50200403 0.4 4 1.6 3 40 UTE502010005 1 4 4 0.5 50
UTE50200405 0.4 4 2 5 40 UTE50201001 1 4 4 1 50
UTE50200407 0.4 4 2 7 40 UTE502010015 1 4 4 1.5 50
UTE50200410 0.4 4 2 10 40 UTE50201002 1 4 6 2 50
UTE502005005 0.5 4 2 0.5 45 UTE50201003 1 4 6 3 50
UTE50200501 0.5 4 2 1 45 UTE50201005 1 4 8 5 50
UTE502005015 0.5 4 2 1.5 45 UTE50201007 1 4 8 7 50
UTE50200502 0.5 4 2 2 45 UTE50201010 1 4 8 10 50
UTE50200503 0.5 4 2 3 45 UTE502015005 1.5 4 6 0.5 50
UTE50200505 0.5 4 2.5 5 45 UTE50201501 1.5 4 6 1 50
UTE50200507 0.5 4 2.5 7 45 UTE502015015 1.5 4 6 1.5 50
UTE50200510 0.5 4 2.5 10 45 UTE50201502 1.5 4 8 2 50
UTE502006005 0.6 4 2.4 0.5 45 UTE50201503 1.5 4 8 3 50
UTE50200601 0.6 4 2.4 1 45 UTE50201505 1.5 4 10 5 50
UTE502006015 0.6 4 2.4 1.5 45 UTE50201507 1.5 4 10 7 50
UTE50200602 0.6 4 2.4 2 45 UTE50201510 1.5 6 10 10 50
UTE50200603 0.6 4 2.4 3 45 UTE502020005 2 4 8 0.5 50
UTE50200605 0.6 4 3 5 45 UTE50202001 2 4 8 1 50
UTE50200607 0.6 4 3 7 45 UTE502020015 2 4 8 1.5 50
UTE50200610 0.6 4 3 10 45 UTE50202002 2 4 10 2 50
UTE502007005 0.7 4 2.8 0.5 45 UTE50202003 2 4 10 3 50
UTE50200701 0.7 4 2.8 1 45 UTE50202005 2 6 12 5 50
UTE502007015 0.7 4 2.8 1.5 45 UTE50202007 2 6 12 7 50
UTE50200702 0.7 4 2.8 2 45 UTE50202010 2 8 12 10 50
KORLOY
Y 133
Endmill
U-Star Endmill
UTE
t50-&3"/$&
DATA ØD Ød
CARBIDE 30 AlCrN
Ø1 ~ Ø12 0 ~ -0.03mm h5
HELIX
p.482

(mm)
UTE502025005 2.5 6 10 0.5 50 UTE50206003 6 8 19 3 65

UTE50202501 2.5 6 10 1 50 UTE50206005 6 10 22 5 75
UTE502025015 2.5 6 10 1.5 50 UTE50206007 6 12 24 7 75
UTE50202502 2.5 6 12 2 50 UTE50206010 6 12 17 10 75
UTE50202503 2.5 6 12 3 50 UTE502070005 7 8 28 0.5 70
UTE50202505 2.5 6 14 5 50 UTE50207001 7 8 28 1 70
UTE50202507 2.5 6 14 7 50 UTE502070015 7 10 28 1.5 70
UTE50202510 2.5 8 14 10 50 UTE50207002 7 10 28 2 80
UTE502030005 3 6 12 0.5 50 UTE50207003 7 10 28 3 80
UTE50203001 3 6 12 1 50 UTE50207005 7 12 28 5 80
UTE502030015 3 6 12 1.5 50 UTE502080005 8 10 35 0.5 90
UTE50203002 3 6 14 2 50 UTE50208001 8 10 35 1 90
UTE50203003 3 6 14 3 50 UTE502080015 8 10 35 1.5 90
UTE50203005 3 6 16 5 50 UTE50208002 8 10 28 2 90
UTE50203007 3 8 16 7 50 UTE50208003 8 12 38 3 90
UTE50203010 3 10 16 10 50 UTE50208005 8 16 45 5 100
UTE502040005 4 6 16 0.5 60 UTE50208007 8 16 32 7 90
UTE50204001 4 6 16 1 60 UTE50208010 8 20 34 10 100
UTE502040015 4 6 16 1.5 60 UTE50208010S25 8 25 48 10 150
UTE50204002 4 6 16 2 60 UTE502100005 10 12 40 0.5 90
UTE50204003 4 6 19 3 60 UTE50210001 10 12 40 1 90
UTE50204005 4 8 22 5 65 UTE502100015 10 12 38 1.5 90
UTE50204007 4 8 16 7 65 UTE50210002 10 16 40 2 75
UTE50204010 4 10 17 10 65 UTE50210003 10 16 40 3 100
UTE502060005 6 8 20 0.5 65 UTE50210005 10 16 34 5 100
UTE50206001 6 8 20 1 65 UTE50210007 10 20 40 7 90
UTE502060015 6 8 20 1.5 65 UTE50210010 10 25 42 10 100
UTE50206002 6 8 20 2 65
○ ◎ ◎ ○ ○
134 KORLOY
UTE
t50-&3"/$&
DATA ØD Ød
CARBIDE 30 AlCrN
Ø0.8 ~ Ø12 0 ~ -0.08mm h5
HELIX
p.482
θ 13°

(mm)
UTE50400800504 0.8 4 4 0.5 45 UTE50401001516 1 4 16 1.5 50

UTE50400800506 0.8 4 6 0.5 45 UTE50401002004 1 4 4 2 50
UTE50400800508 0.8 4 8 0.5 45 UTE50401002006 1 4 6 2 50
UTE50400800510 0.8 4 10 0.5 45 UTE50401002008 1 4 8 2 50
UTE50400800512 0.8 4 12 0.5 45 UTE50401002010 1 4 10 2 50
UTE50400801004 0.8 4 4 1 45 UTE50401002012 1 4 12 2 50
UTE50400801006 0.8 4 6 1 45 UTE50401002016 1 4 16 2 50
UTE50400801008 0.8 4 8 1 45 UTE50401003004 1 4 4 3 50
UTE50400801010 0.8 4 10 1 45 UTE50401003006 1 4 6 3 50
UTE50400801012 0.8 4 12 1 45 UTE50401003008 1 4 8 3 50
UTE50400801504 0.8 4 4 1.5 45 UTE50401003010 1 4 10 3 50
UTE50400801506 0.8 4 6 1.5 45 UTE50401003012 1 4 12 3 50
UTE50400801508 0.8 4 8 1.5 45 UTE50401003016 1 4 16 3 50
UTE50400801510 0.8 4 10 1.5 45 UTE50401200506 1.2 4 6 0.5 50
UTE50400801512 0.8 4 12 1.5 45 UTE50401200508 1.2 4 8 0.5 50
UTE50400802004 0.8 4 4 2 45 UTE50401200510 1.2 4 10 0.5 50
UTE50400802006 0.8 4 6 2 45 UTE50401200512 1.2 4 12 0.5 50
UTE50400802008 0.8 4 8 2 45 UTE50401200516 1.2 4 16 0.5 50
UTE50400802010 0.8 4 10 2 45 UTE50401201006 1.2 4 6 1 50
UTE50400802012 0.8 4 12 2 45 UTE50401201008 1.2 4 8 1 50
UTE50401000504 1 4 4 0.5 50 UTE50401201010 1.2 4 10 1 50
UTE50401000506 1 4 6 0.5 50 UTE50401201012 1.2 4 12 1 50
UTE50401000508 1 4 8 0.5 50 UTE50401201016 1.2 4 16 1 50
UTE50401000510 1 4 10 0.5 50 UTE50401201506 1.2 4 6 1.5 50
UTE50401000512 1 4 12 0.5 50 UTE50401201508 1.2 4 8 1.5 50
UTE50401000516 1 4 16 0.5 50 UTE50401201510 1.2 4 10 1.5 50
UTE50401001004 1 4 4 1 50 UTE50401201512 1.2 4 12 1.5 50
UTE50401001006 1 4 6 1 50 UTE50401201516 1.2 4 16 1.5 50
UTE50401001008 1 4 8 1 50 UTE50401202006 1.2 4 6 2 50
UTE50401001010 1 4 10 1 50 UTE50401202008 1.2 4 8 2 50
UTE50401001012 1 4 12 1 50 UTE50401202010 1.2 4 10 2 50
UTE50401001016 1 4 16 1 50 UTE50401202012 1.2 4 12 2 50
UTE50401001504 1 4 4 1.5 50 UTE50401202016 1.2 4 16 2 50
UTE50401001506 1 4 6 1.5 50 UTE50401203006 1.2 4 6 3 50
UTE50401001508 1 4 8 1.5 50 UTE50401203008 1.2 4 8 3 50
UTE50401001510 1 4 10 1.5 50 UTE50401203010 1.2 4 10 3 50
UTE50401001512 1 4 12 1.5 50 UTE50401203012 1.2 4 12 3 50
KORLOY
Y 135
Endmill
U-Star Endmill
UTE
t50-&3"/$&
DATA ØD Ød
CARBIDE 30 AlCrN
Ø0.8 ~ Ø12 0 ~ -0.08mm h5
HELIX
p.482
θ 13°

(mm)
UTE50401203016 1.2 4 16 3 50 UTE50402001008 2 4 8 1 50

UTE50401500506 1.5 4 6 0.5 50 UTE50402001010 2 4 10 1 50
UTE50401500508 1.5 4 8 0.5 50 UTE50402001012 2 4 12 1 50
UTE50401500510 1.5 4 10 0.5 50 UTE50402001016 2 4 16 1 50
UTE50401500512 1.5 4 12 0.5 50 UTE50402001020 2 4 20 1 60
UTE50401500516 1.5 4 16 0.5 50 UTE50402001025 2 4 25 1 60
UTE50401500520 1.5 4 20 0.5 60 UTE50402001508 2 4 8 1.5 50
UTE50401501006 1.5 4 6 1 50 UTE50402001510 2 4 10 1.5 50
UTE50401501008 1.5 4 8 1 50 UTE50402001512 2 4 12 1.5 50
UTE50401501010 1.5 4 10 1 50 UTE50402001516 2 4 16 1.5 50
UTE50401501012 1.5 4 12 1 50 UTE50402001520 2 4 20 1.5 60
UTE50401501016 1.5 4 16 1 50 UTE50402001525 2 4 25 1.5 60
UTE50401501020 1.5 4 20 1 60 UTE50402002008 2 4 8 2 50
UTE50401501506 1.5 4 6 1.5 50 UTE50402002010 2 4 10 2 50
UTE50401501508 1.5 4 8 1.5 50 UTE50402002012 2 4 12 2 50
UTE50401501510 1.5 4 10 1.5 50 UTE50402002016 2 4 16 2 50
UTE50401501512 1.5 4 12 1.5 50 UTE50402002020 2 4 20 2 60
UTE50401501516 1.5 4 16 1.5 50 UTE50402002025 2 4 25 2 60
UTE50401501520 1.5 4 20 1.5 60 UTE50402003008 2 4 8 3 50
UTE50401502006 1.5 4 6 2 50 UTE50402003010 2 4 10 3 50
UTE50401502008 1.5 4 8 2 50 UTE50402003012 2 4 12 3 50
UTE50401502010 1.5 4 10 2 50 UTE50402003016 2 4 16 3 50
UTE50401502012 1.5 4 12 2 50 UTE50402003020 2 6 20 3 60
UTE50401502016 1.5 4 16 2 50 UTE50402003025 2 6 25 3 60
UTE50401502020 1.5 4 20 2 60 UTE50402500510 2.5 4 10 0.5 50
UTE50401503006 1.5 4 6 3 50 UTE50402500512 2.5 4 12 0.5 50
UTE50401503008 1.5 4 8 3 50 UTE50402500516 2.5 4 16 0.5 50
UTE50401503010 1.5 4 10 3 50 UTE50402500520 2.5 4 20 0.5 60
UTE50401503012 1.5 4 12 3 50 UTE50402500525 2.5 4 25 0.5 60
UTE50401503016 1.5 4 16 3 50 UTE50402500530 2.5 4 30 0.5 60
UTE50401503020 1.5 4 20 3 60 UTE50402501010 2.5 4 10 1 50
UTE50402000508 2 4 8 0.5 50 UTE50402501012 2.5 4 12 1 50
UTE50402000510 2 4 10 0.5 50 UTE50402501016 2.5 4 16 1 50
UTE50402000512 2 4 12 0.5 50 UTE50402501020 2.5 4 20 1 60
UTE50402000516 2 4 16 0.5 50 UTE50402501025 2.5 4 25 1 60
UTE50402000520 2 4 20 0.5 60 UTE50402501030 2.5 4 30 1 60
UTE50402000525 2 4 25 0.5 60 UTE50402501510 2.5 4 10 1.5 50
136 KORLOY
UTE
t50-&3"/$&
DATA ØD Ød
CARBIDE 30 AlCrN
Ø0.8 ~ Ø12 0 ~ -0.08mm h5
HELIX
p.482
θ 13°

(mm)
UTE50402501512 2.5 4 12 1.5 50 UTE50404010 4 10 17 10 65

UTE50402501516 2.5 4 16 1.5 50 UTE504060005 6 8 20 0.5 65
UTE50402501520 2.5 4 20 1.5 60 UTE50406001 6 8 20 1 65
UTE50402501525 2.5 4 25 1.5 60 UTE504060015 6 8 20 1.5 65
UTE50402501530 2.5 6 30 1.5 60 UTE50406002 6 8 20 2 65
UTE50402502010 2.5 4 10 2 50 UTE50406003 6 8 19 3 65
UTE50402502012 2.5 4 12 2 50 UTE50406005 6 10 22 5 75
UTE50402502016 2.5 4 16 2 50 UTE50406007 6 12 24 7 75
UTE50402502020 2.5 4 20 2 60 UTE50406010 6 12 17 10 75
UTE50402502025 2.5 6 25 2 60 UTE504070005 7 8 28 0.5 70
UTE50402502030 2.5 6 30 2 60 UTE50407001 7 8 28 1 70
UTE50402503010 2.5 4 10 3 50 UTE504070015 7 10 28 1.5 70
UTE50402503012 2.5 4 12 3 50 UTE50407002 7 10 28 2 80
UTE50402503016 2.5 6 16 3 50 UTE50407003 7 10 28 3 80
UTE50402503020 2.5 6 20 3 60 UTE50407005 7 12 28 5 80
UTE50402503025 2.5 6 25 3 60 UTE504080005 8 10 35 0.5 90
UTE50402503030 2.5 6 30 3 60 UTE50408001 8 10 35 1 90
UTE504030005 3 6 12 0.5 50 UTE504080015 8 10 35 1.5 90
UTE50403001 3 6 12 1 50 UTE50408002 8 10 28 2 90
UTE504030015 3 6 12 1.5 50 UTE50408003 8 12 38 3 90
UTE50403002 3 6 14 2 50 UTE50408005 8 16 45 5 100
UTE50403003 3 6 14 3 50 UTE50408007 8 16 32 7 90
UTE50403005 3 6 16 5 50 UTE50408010 8 20 34 10 100
UTE50403007 3 8 16 7 50 UTE504100005 10 12 40 0.5 90
UTE50403010 3 10 16 10 50 UTE50410001 10 12 40 1 90
UTE504040005 4 6 16 0.5 60 UTE504100015 10 12 38 1.5 90
UTE50404001 4 6 16 1 60 UTE50410002 10 16 40 2 90
UTE504040015 4 6 16 1.5 60 UTE50410003 10 16 40 3 100
UTE50404002 4 6 16 2 60 UTE50410005 10 16 34 5 100
UTE50404003 4 6 19 3 60 UTE50410007 10 20 40 7 90
UTE50404005 4 8 22 5 65 UTE50410010 10 25 42 10 100
UTE50404007 4 8 16 7 65
○ ◎ ◎ ○ ○
KORLOY
Y 137
Endmill
U-Star Endmill
UR5
R502 t50-&3"/$&
2 Flutes radius endmill
ØD Ød
CARBIDE 30 R R AlCrN
DATA
Ø0.2 ~ Ø6 0 ~ -0.012mm
h5
HELIX ±0.01 ±0.01 Ø7 ~ Ø20 0 ~ -0.015mm
p.483

(mm)
UR502002002 0.02 0.2 4 0.4 40 UR50202505 0.5 2.5 6 7 60

UR502002005 0.05 0.2 4 0.4 40 UR50203001 0.1 3 6 8 60
UR502003002 0.02 0.3 4 0.6 40 UR50203002 0.2 3 6 8 60
UR502003005 0.05 0.3 4 0.6 40 UR50203003 0.3 3 6 8 60
UR502004005 0.05 0.4 4 0.8 40 UR50203005 0.5 3 6 8 60
UR50200401 0.1 0.4 4 0.8 40 UR50203010 1 3 6 8 60
UR502005005 0.05 0.5 4 1 40 UR50203501 0.1 3.5 6 10 70
UR50200501 0.1 0.5 4 1 40 UR50203502 0.2 3.5 6 10 70
UR502006005 0.05 0.6 4 1.2 40 UR50203503 0.3 3.5 6 10 70
UR50200601 0.1 0.6 4 1.2 40 UR50203505 0.5 3.5 6 10 70
UR50200602 0.2 0.6 4 1.2 40 UR50204001 0.1 4 6 10 70
UR502007005 0.05 0.7 4 1.4 40 UR50204001100S4 0.1 4 4 10 100
UR50200701 0.1 0.7 4 1.4 40 UR50204001S4 0.1 4 4 10 70
UR50200702 0.2 0.7 4 1.4 40 UR50204002 0.2 4 6 10 70
UR502008005 0.05 0.8 4 1.6 40 UR50204002100S4 0.2 4 4 10 100
UR50200801 0.1 0.8 4 1.6 40 UR50204002S4 0.2 4 4 10 70
UR50200802 0.2 0.8 4 1.6 40 UR50204003 0.3 4 6 10 70
UR502009005 0.05 0.9 4 1.8 40 UR50204003100S4 0.3 4 4 10 100
UR50200901 0.1 0.9 4 1.8 40 UR50204003S4 0.3 4 4 10 70
UR502010005 0.05 1 6 2.5 50 UR50204005 0.5 4 6 10 70
UR50201001 0.1 1 6 2.5 50 UR50204005100S4 0.5 4 4 10 100
UR50201002 0.2 1 6 2.5 50 UR50204005S4 0.5 4 4 10 70
UR50201003 0.3 1 6 2.5 50 UR50204010 1 4 6 10 70
UR502012005 0.05 1.2 6 3 50 UR50204010100S4 1 4 4 10 100
UR50201201 0.1 1.2 6 3 50 UR50204010S4 1 4 4 10 70
UR50201202 0.2 1.2 6 3 50 UR50204501 0.1 4.5 6 11 80
UR50201203 0.3 1.2 6 3 50 UR50204502 0.2 4.5 6 11 80
UR502015005 0.05 1.5 6 4 50 UR50204503 0.3 4.5 6 11 80
UR50201501 0.1 1.5 6 4 50 UR50204505 0.5 4.5 6 11 80
UR50201502 0.2 1.5 6 4 50 UR50205001 0.1 5 6 13 90
UR50201503 0.3 1.5 6 4 50 UR50205002 0.2 5 6 13 90
UR50201505 0.5 1.5 6 4 50 UR50205003 0.3 5 6 13 90
UR50202001 0.1 2 6 6 50 UR50205005 0.5 5 6 13 90
UR50202002 0.2 2 6 6 50 UR50205010 1 5 6 13 90
UR50202003 0.3 2 6 6 50 UR50205501 0.1 5.5 6 13 90
UR50202005 0.5 2 6 6 50 UR50205502 0.2 5.5 6 13 90
UR50202501 0.1 2.5 6 7 60 UR50205503 0.3 5.5 6 13 90
UR50202502 0.2 2.5 6 7 60 UR50205505 0.5 5.5 6 13 90
UR50202503 0.3 2.5 6 7 60 UR50205510 1 5.5 6 13 90
138 KORLOY
UR5
R502 t50-&3"/$&
ØD Ød
DATA
Ø0.2 ~ Ø6 0 ~ -0.012mm
h5
HELIX ±0.01 ±0.01 Ø7 ~ Ø20 0 ~ -0.015mm
p.483

(mm)
UR50206001 0.1 6 6 15 90 UR5021000375 0.3 10 10 25 75

UR50206002 0.2 6 6 15 90 UR50210005 0.5 10 10 25 100
UR50206003 0.3 6 6 15 90 UR50210005130 0.5 10 10 25 130
UR5020600360 0.3 6 6 15 60 UR50210005150 0.5 10 10 25 150
UR50206005 0.5 6 6 15 90 UR5021000575 0.5 10 10 25 75
UR50206005110 0.5 6 6 15 110 UR50210010 1 10 10 25 100
UR50206005130 0.5 6 6 15 130 UR50210010130 1 10 10 25 130
UR5020600560 0.5 6 6 15 60 UR50210010150 1 10 10 25 150
UR50206010 1 6 6 15 90 UR5021001075 1 10 10 25 75
UR50206010110 1 6 6 15 110 UR50210015 1.5 10 10 25 100
UR50206010130 1 6 6 15 130 UR50210020 2 10 10 25 100
UR5020601060 1 6 6 15 60 UR50210025 2.5 10 10 25 100
UR50206015 1.5 6 6 15 90 UR50210030 3 10 10 25 100
UR50206020 2 6 6 15 90 UR50210040 4 10 10 25 100
UR50207001 0.1 7 8 16 90 UR50211002 0.2 11 12 25 110
UR50207002 0.2 7 8 16 90 UR50211003 0.3 11 12 25 110
UR50207003 0.3 7 8 16 90 UR50211005 0.5 11 12 25 110
UR50207005 0.5 7 8 16 90 UR50211010 1 11 12 25 110
UR50207010 1 7 8 16 90 UR50211020 2 11 12 25 110
UR50207020 2 7 8 16 90 UR50212001 0.1 12 12 30 110
UR50208001 0.1 8 8 20 100 UR50212002 0.2 12 12 30 110
UR50208002 0.2 8 8 20 100 UR50212003 0.3 12 12 30 110
UR50208003 0.3 8 8 20 100 UR5021200380 0.3 12 12 30 80
UR5020800370 0.3 8 8 20 70 UR50212005 0.5 12 12 30 110
UR50208005 0.5 8 8 20 100 UR50212005130 0.5 12 12 30 130
UR50208005120 0.5 8 8 20 120 UR50212005150 0.5 12 12 30 150
UR50208005150 0.5 8 8 20 150 UR5021200580 0.5 12 12 30 80
UR5020800570 0.5 8 8 20 70 UR50212010 1 12 12 30 110
UR50208010 1 8 8 20 100 UR50212010130 1 12 12 30 130
UR50208010120 1 8 8 20 120 UR50212010150 1 12 12 30 150
UR50208010150 1 8 8 20 150 UR5021201080 1 12 12 30 80
UR5020801070 1 8 8 20 70 UR50212015 1.5 12 12 30 110
UR50208015 1.5 8 8 20 100 UR50212020 2 12 12 30 110
UR50208020 2 8 8 20 100 UR50212025 2.5 12 12 30 110
UR50208025 2.5 8 8 20 100 UR50212030 3 12 12 30 110
UR50208030 3 8 8 20 100 UR50212040 4 12 12 30 110
UR50210001 0.1 10 10 25 100 UR50212050 5 12 12 30 110
UR50210002 0.2 10 10 25 100 UR50214005 0.5 14 16 30 150
UR50210003 0.3 10 10 25 100 UR50214010 1 14 16 30 150
KORLOY
Y 139
Endmill
U-Star Endmill
UR5
R502 t50-&3"/$&
ØD Ød
DATA
Ø0.2 ~ Ø6 0 ~ -0.012mm
h5
HELIX ±0.01 ±0.01 Ø7 ~ Ø20 0 ~ -0.015mm
p.483

(mm)
UR50214020 2 14 16 30 150 UR50201502 0.2 1.5 6 4 50

UR50216005 0.5 16 16 32 150 UR50201503 0.3 1.5 6 4 50
UR50216010 1 16 16 32 150 UR50201505 0.5 1.5 6 4 50
UR50216015 1.5 16 16 32 150 UR50202001 0.1 2 6 6 50
UR502002002 0.02 0.2 4 0.4 40 UR50202002 0.2 2 6 6 50
UR502002005 0.05 0.2 4 0.4 40 UR50202003 0.3 2 6 6 50
UR502003002 0.02 0.3 4 0.6 40 UR50202005 0.5 2 6 6 50
UR502003005 0.05 0.3 4 0.6 40 UR50202501 0.1 2.5 6 7 60
UR502004005 0.05 0.4 4 0.8 40 UR50202502 0.2 2.5 6 7 60
UR50200401 0.1 0.4 4 0.8 40 UR50202503 0.3 2.5 6 7 60
UR502005005 0.05 0.5 4 1 40 UR50202505 0.5 2.5 6 7 60
UR50200501 0.1 0.5 4 1 40 UR50203001 0.1 3 6 8 60
UR502006005 0.05 0.6 4 1.2 40 UR50203002 0.2 3 6 8 60
UR50200601 0.1 0.6 4 1.2 40 UR50203003 0.3 3 6 8 60
UR50200602 0.2 0.6 4 1.2 40 UR50203005 0.5 3 6 8 60
UR502007005 0.05 0.7 4 1.4 40 UR50203010 1 3 6 8 60
UR50200701 0.1 0.7 4 1.4 40 UR50203501 0.1 3.5 6 10 70
UR50200702 0.2 0.7 4 1.4 40 UR50203502 0.2 3.5 6 10 70
UR502008005 0.05 0.8 4 1.6 40 UR50203503 0.3 3.5 6 10 70
UR50200801 0.1 0.8 4 1.6 40 UR50203505 0.5 3.5 6 10 70
UR50200802 0.2 0.8 4 1.6 40 UR50204001 0.1 4 6 10 70
UR502009005 0.05 0.9 4 1.8 40 UR50204001100S4 0.1 4 4 10 100
UR50200901 0.1 0.9 4 1.8 40 UR50204001S4 0.1 4 4 10 70
UR502010005 0.05 1 6 2.5 50 UR50204002 0.2 4 6 10 70
UR50201001 0.1 1 6 2.5 50 UR50204002100S4 0.2 4 4 10 100
UR50201002 0.2 1 6 2.5 50 UR50204002S4 0.2 4 4 10 70
UR50201003 0.3 1 6 2.5 50 UR50204003 0.3 4 6 10 70
UR502012005 0.05 1.2 6 3 50 UR50204003100S4 0.3 4 4 10 100
UR50201201 0.1 1.2 6 3 50 UR50204003S4 0.3 4 4 10 70
UR50201202 0.2 1.2 6 3 50 UR50204005 0.5 4 6 10 70
UR50201203 0.3 1.2 6 3 50 UR50204005100S4 0.5 4 4 10 100
UR502015005 0.05 1.5 6 4 50 UR50204005S4 0.5 4 4 10 70
UR50201501 0.1 1.5 6 4 50 UR50204010 1 4 6 10 70
○ ◎ ◎ ○ ○
140 KORLOY
UR5
R512 2 Flutes neck type radius endmill
t50-&3"/$&
ØD Ød
DATA
Ø0.2 ~ Ø6 0 ~ -0.012mm
h5
HELIX ±0.01 ±0.01 Ø8 ~ Ø20 0 ~ -0.015mm
Corner R p.484
13°

1
2
(mm)
UR512002002005 0.02 0.2 4 0.3 0.5 40 UR5120050103 0.1 0.5 4 0.7 3 45

UR51200200201 0.02 0.2 4 0.3 1 40 UR5120050104 0.1 0.5 4 0.7 4 45
UR512002002015 0.02 0.2 4 0.3 1.5 40 UR5120050105 0.1 0.5 4 0.7 5 45
UR51200200202 0.02 0.2 4 0.3 2 40 UR5120050106 0.1 0.5 4 0.7 6 45
UR512002005005 0.05 0.2 4 0.3 0.5 40 UR51200600502 0.05 0.6 4 0.9 2 45
UR51200200501 0.05 0.2 4 0.3 1 40 UR51200600503 0.05 0.6 4 0.9 3 45
UR512002005015 0.05 0.2 4 0.3 1.5 40 UR51200600504 0.05 0.6 4 0.9 4 45
UR51200200502 0.05 0.2 4 0.3 2 40 UR51200600506 0.05 0.6 4 0.9 6 45
UR51200300201 0.02 0.3 4 0.5 1 40 UR51200600508 0.05 0.6 4 0.9 8 45
UR51200300202 0.02 0.3 4 0.5 2 40 UR51200600510 0.05 0.6 4 0.9 10 45
UR51200300203 0.02 0.3 4 0.5 3 40 UR5120060102 0.1 0.6 4 0.9 2 45
UR51200300501 0.05 0.3 4 0.5 1 40 UR5120060103 0.1 0.6 4 0.9 3 45
UR51200300502 0.05 0.3 4 0.5 2 40 UR5120060104 0.1 0.6 4 0.9 4 45
UR51200300503 0.05 0.3 4 0.5 3 40 UR5120060106 0.1 0.6 4 0.9 6 45
UR51200400501 0.05 0.4 4 0.6 1 40 UR5120060108 0.1 0.6 4 0.9 8 45
UR512004005015 0.05 0.4 4 0.6 1.5 40 UR5120060110 0.1 0.6 4 0.9 10 45
UR51200400502 0.05 0.4 4 0.6 2 40 UR5120060202 0.2 0.6 4 0.9 2 45
UR512004005025 0.05 0.4 4 0.6 2.5 40 UR5120060203 0.2 0.6 4 0.9 3 45
UR51200400503 0.05 0.4 4 0.6 3 40 UR5120060204 0.2 0.6 4 0.9 4 45
UR51200400504 0.05 0.4 4 0.6 4 40 UR5120060206 0.2 0.6 4 0.9 6 45
UR5120040101 0.1 0.4 4 0.6 1 40 UR5120060208 0.2 0.6 4 0.9 8 45
UR51200401015 0.1 0.4 4 0.6 1.5 40 UR5120060210 0.2 0.6 4 0.9 10 45
UR5120040102 0.1 0.4 4 0.6 2 40 UR51200700502 0.05 0.7 4 1.2 2 45
UR51200401025 0.1 0.4 4 0.6 2.5 40 UR51200700504 0.05 0.7 4 1.2 4 45
UR5120040103 0.1 0.4 4 0.6 3 40 UR51200700506 0.05 0.7 4 1.2 6 45
UR5120040104 0.1 0.4 4 0.6 4 40 UR51200700508 0.05 0.7 4 1.2 8 45
UR51200500501 0.05 0.5 4 0.7 1 45 UR51200700510 0.05 0.7 4 1.2 10 45
UR512005005015 0.05 0.5 4 0.7 1.5 45 UR5120070102 0.1 0.7 4 1.2 2 45
UR51200500502 0.05 0.5 4 0.7 2 45 UR5120070104 0.1 0.7 4 1.2 4 45
UR512005005025 0.05 0.5 4 0.7 2.5 45 UR5120070106 0.1 0.7 4 1.2 6 45
UR51200500503 0.05 0.5 4 0.7 3 45 UR5120070108 0.1 0.7 4 1.2 8 45
UR51200500504 0.05 0.5 4 0.7 4 45 UR5120070110 0.1 0.7 4 1.2 10 45
UR51200500505 0.05 0.5 4 0.7 5 45 UR5120070202 0.2 0.7 4 1.2 2 45
UR51200500506 0.05 0.5 4 0.7 6 45 UR5120070204 0.2 0.7 4 1.2 4 45
UR5120050101 0.1 0.5 4 0.7 1 45 UR5120070206 0.2 0.7 4 1.2 6 45
UR51200501015 0.1 0.5 4 0.7 1.5 45 UR5120070208 0.2 0.7 4 1.2 8 45
UR5120050102 0.1 0.5 4 0.7 2 45 UR5120070210 0.2 0.7 4 1.2 10 45
UR51200501025 0.1 0.5 4 0.7 2.5 45 UR51200800502 0.05 0.8 4 1.2 2 45
KORLOY
Y 141
Endmill
U-Star Endmill
UR5
t50-&3"/$&
ØD Ød
DATA
Ø0.2 ~ Ø6 0 ~ -0.012mm
h5
HELIX ±0.01 ±0.01 Ø8 ~ Ø20 0 ~ -0.015mm
Corner R p.484
13°

1
2
(mm)
UR51200800503 0.05 0.8 4 1.2 3 45 UR5120100208 0.2 1 4 1.5 8 50

UR51200800504 0.05 0.8 4 1.2 4 45 UR5120100210 0.2 1 4 1.5 10 50
UR51200800506 0.05 0.8 4 1.2 6 45 UR5120100212 0.2 1 4 1.5 12 50
UR51200800508 0.05 0.8 4 1.2 8 45 UR5120100214 0.2 1 4 1.5 14 50
UR51200800510 0.05 0.8 4 1.2 10 45 UR5120100216 0.2 1 4 1.5 16 50
UR5120080102 0.1 0.8 4 1.2 2 45 UR5120100220 0.2 1 4 1.5 20 50
UR5120080103 0.1 0.8 4 1.2 3 45 UR5120100303 0.3 1 4 1.5 3 50
UR5120080104 0.1 0.8 4 1.2 4 45 UR5120100304 0.3 1 4 1.5 4 50
UR5120080106 0.1 0.8 4 1.2 6 45 UR5120100306 0.3 1 4 1.5 6 50
UR5120080108 0.1 0.8 4 1.2 8 45 UR5120100308 0.3 1 4 1.5 8 50
UR5120080110 0.1 0.8 4 1.2 10 45 UR5120100310 0.3 1 4 1.5 10 50
UR5120080202 0.2 0.8 4 1.2 2 45 UR5120100312 0.3 1 4 1.5 12 50
UR5120080203 0.2 0.8 4 1.2 3 45 UR5120100314 0.3 1 4 1.5 14 50
UR5120080204 0.2 0.8 4 1.2 4 45 UR5120100316 0.3 1 4 1.5 16 50
UR5120080206 0.2 0.8 4 1.2 6 45 UR5120100320 0.3 1 4 1.5 20 50
UR5120080208 0.2 0.8 4 1.2 8 45 UR51201200503 0.05 1.2 4 1.8 3 50
UR5120080210 0.2 0.8 4 1.2 10 45 UR51201200504 0.05 1.2 4 1.8 4 50
UR51201000503 0.05 1 4 1.5 3 50 UR51201200506 0.05 1.2 4 1.8 6 50
UR51201000504 0.05 1 4 1.5 4 50 UR51201200508 0.05 1.2 4 1.8 8 50
UR51201000506 0.05 1 4 1.5 6 50 UR51201200510 0.05 1.2 4 1.8 10 50
UR51201000508 0.05 1 4 1.5 8 50 UR51201200512 0.05 1.2 4 1.8 12 50
UR51201000510 0.05 1 4 1.5 10 50 UR51201200516 0.05 1.2 4 1.8 16 50
UR51201000512 0.05 1 4 1.5 12 50 UR51201200520 0.05 1.2 4 1.8 20 50
UR51201000514 0.05 1 4 1.5 14 50 UR5120120103 0.1 1.2 4 1.8 3 50
UR51201000516 0.05 1 4 1.5 16 50 UR5120120104 0.1 1.2 4 1.8 4 50
UR51201000520 0.05 1 4 1.5 20 50 UR5120120106 0.1 1.2 4 1.8 6 50
UR5120100103 0.1 1 4 1.5 3 50 UR5120120108 0.1 1.2 4 1.8 8 50
UR5120100104 0.1 1 4 1.5 4 50 UR5120120110 0.1 1.2 4 1.8 10 50
UR5120100106 0.1 1 4 1.5 6 50 UR5120120112 0.1 1.2 4 1.8 12 50
UR5120100108 0.1 1 4 1.5 8 50 UR5120120116 0.1 1.2 4 1.8 16 50
UR5120100110 0.1 1 4 1.5 10 50 UR5120120120 0.1 1.2 4 1.8 20 50
UR5120100112 0.1 1 4 1.5 12 50 UR5120120203 0.2 1.2 4 1.8 3 50
UR5120100114 0.1 1 4 1.5 14 50 UR5120120204 0.2 1.2 4 1.8 4 50
UR5120100116 0.1 1 4 1.5 16 50 UR5120120206 0.2 1.2 4 1.8 6 50
UR5120100120 0.1 1 4 1.5 20 50 UR5120120208 0.2 1.2 4 1.8 8 50
UR5120100203 0.2 1 4 1.5 3 50 UR5120120210 0.2 1.2 4 1.8 10 50
UR5120100204 0.2 1 4 1.5 4 50 UR5120120212 0.2 1.2 4 1.8 12 50
UR5120100206 0.2 1 4 1.5 6 50 UR5120120216 0.2 1.2 4 1.8 16 50
142 KORLOY
UR5
t50-&3"/$&
ØD Ød
DATA
Ø0.2 ~ Ø6 0 ~ -0.012mm
h5
HELIX ±0.01 ±0.01 Ø8 ~ Ø20 0 ~ -0.015mm
Corner R p.484
13°

1
2
(mm)
UR5120120220 0.2 1.2 4 1.8 20 50 UR5120150226 0.2 1.5 4 2.3 26 60

UR5120120303 0.3 1.2 4 1.8 3 50 UR5120150304 0.3 1.5 4 2.3 4 50
UR5120120304 0.3 1.2 4 1.8 4 50 UR5120150306 0.3 1.5 4 2.3 6 50
UR5120120306 0.3 1.2 4 1.8 6 50 UR5120150308 0.3 1.5 4 2.3 8 50
UR5120120308 0.3 1.2 4 1.8 8 50 UR5120150310 0.3 1.5 4 2.3 10 50
UR5120120310 0.3 1.2 4 1.8 10 50 UR5120150312 0.3 1.5 4 2.3 12 50
UR5120120312 0.3 1.2 4 1.8 12 50 UR5120150314 0.3 1.5 4 2.3 14 50
UR5120120316 0.3 1.2 4 1.8 16 50 UR5120150316 0.3 1.5 4 2.3 16 50
UR5120120320 0.3 1.2 4 1.8 20 50 UR5120150320 0.3 1.5 4 2.3 20 50
UR51201500504 0.05 1.5 4 2.3 4 50 UR5120150322 0.3 1.5 4 2.3 22 60
UR51201500506 0.05 1.5 4 2.3 6 50 UR5120150326 0.3 1.5 4 2.3 26 60
UR51201500508 0.05 1.5 4 2.3 8 50 UR5120150504 0.5 1.5 4 2.3 4 50
UR51201500510 0.05 1.5 4 2.3 10 50 UR5120150506 0.5 1.5 4 2.3 6 50
UR51201500512 0.05 1.5 4 2.3 12 50 UR5120150508 0.5 1.5 4 2.3 8 50
UR51201500514 0.05 1.5 4 2.3 14 50 UR5120150510 0.5 1.5 4 2.3 10 50
UR51201500516 0.05 1.5 4 2.3 16 50 UR5120150512 0.5 1.5 4 2.3 12 50
UR51201500520 0.05 1.5 4 2.3 20 50 UR5120150514 0.5 1.5 4 2.3 14 50
UR51201500522 0.05 1.5 4 2.3 22 60 UR5120150516 0.5 1.5 4 2.3 16 50
UR51201500526 0.05 1.5 4 2.3 26 60 UR5120150520 0.5 1.5 4 2.3 20 50
UR5120150104 0.1 1.5 4 2.3 4 50 UR5120150522 0.5 1.5 4 2.3 22 60
UR5120150106 0.1 1.5 4 2.3 6 50 UR5120150526 0.5 1.5 4 2.3 26 60
UR5120150108 0.1 1.5 4 2.3 8 50 UR5120200106 0.1 2 4 3 6 50
UR5120150110 0.1 1.5 4 2.3 10 50 UR5120200108 0.1 2 4 3 8 50
UR5120150112 0.1 1.5 4 2.3 12 50 UR5120200110 0.1 2 4 3 10 50
UR5120150114 0.1 1.5 4 2.3 14 50 UR5120200112 0.1 2 4 3 12 50
UR5120150116 0.1 1.5 4 2.3 16 50 UR5120200114 0.1 2 4 3 14 50
UR5120150120 0.1 1.5 4 2.3 20 50 UR5120200116 0.1 2 4 3 16 50
UR5120150122 0.1 1.5 4 2.3 22 60 UR5120200120 0.1 2 4 3 20 50
UR5120150126 0.1 1.5 4 2.3 26 60 UR5120200122 0.1 2 4 3 22 60
UR5120150204 0.2 1.5 4 2.3 4 50 UR5120200126 0.1 2 4 3 26 60
UR5120150206 0.2 1.5 4 2.3 6 50 UR5120200130 0.1 2 4 3 30 70
UR5120150208 0.2 1.5 4 2.3 8 50 UR5120200206 0.2 2 4 3 6 50
UR5120150210 0.2 1.5 4 2.3 10 50 UR5120200208 0.2 2 4 3 8 50
UR5120150212 0.2 1.5 4 2.3 12 50 UR5120200210 0.2 2 4 3 10 50
UR5120150214 0.2 1.5 4 2.3 14 50 UR5120200212 0.2 2 4 3 12 50
UR5120150216 0.2 1.5 4 2.3 16 50 UR5120200214 0.2 2 4 3 14 50
UR5120150220 0.2 1.5 4 2.3 20 50 UR5120200216 0.2 2 4 3 16 50
UR5120150222 0.2 1.5 4 2.3 22 60 UR5120200220 0.2 2 4 3 20 50
KORLOY
Y 143
Endmill
U-Star Endmill
UR5
t50-&3"/$&
ØD Ød
DATA
Ø0.2 ~ Ø6 0 ~ -0.012mm
h5
HELIX ±0.01 ±0.01 Ø8 ~ Ø20 0 ~ -0.015mm
Corner R p.484
13°

1
2
(mm)
UR5120200222 0.2 2 4 3 22 60 UR5120250230 0.2 2.5 4 4 30 70

UR5120200226 0.2 2 4 3 26 60 UR5120250308 0.3 2.5 4 4 8 50
UR5120200230 0.2 2 4 3 30 70 UR5120250310 0.3 2.5 4 4 10 50
UR5120200306 0.3 2 4 3 6 50 UR5120250312 0.3 2.5 4 4 12 50
UR5120200308 0.3 2 4 3 8 50 UR5120250314 0.3 2.5 4 4 14 50
UR5120200310 0.3 2 4 3 10 50 UR5120250316 0.3 2.5 4 4 16 50
UR5120200312 0.3 2 4 3 12 50 UR5120250320 0.3 2.5 4 4 20 50
UR5120200314 0.3 2 4 3 14 50 UR5120250326 0.3 2.5 4 4 26 60
UR5120200316 0.3 2 4 3 16 50 UR5120250330 0.3 2.5 4 4 30 70
UR5120200320 0.3 2 4 3 20 50 UR5120250508 0.5 2.5 4 4 8 50
UR5120200322 0.3 2 4 3 22 60 UR5120250510 0.5 2.5 4 4 10 50
UR5120200326 0.3 2 4 3 26 60 UR5120250512 0.5 2.5 4 4 12 50
UR5120200330 0.3 2 4 3 30 70 UR5120250514 0.5 2.5 4 4 14 50
UR5120200506 0.5 2 4 3 6 50 UR5120250516 0.5 2.5 4 4 16 50
UR5120200508 0.5 2 4 3 8 50 UR5120250520 0.5 2.5 4 4 20 50
UR5120200510 0.5 2 4 3 10 50 UR5120250526 0.5 2.5 4 4 26 60
UR5120200512 0.5 2 4 3 12 50 UR5120250530 0.5 2.5 4 4 30 70
UR5120200514 0.5 2 4 3 14 50 UR5120300108 0.1 3 6 4.5 8 50
UR5120200516 0.5 2 4 3 16 50 UR5120300110 0.1 3 6 4.5 10 50
UR5120200520 0.5 2 4 3 20 50 UR5120300112 0.1 3 6 4.5 12 50
UR5120200522 0.5 2 4 3 22 60 UR5120300114 0.1 3 6 4.5 14 60
UR5120200526 0.5 2 4 3 26 60 UR5120300116 0.1 3 6 4.5 16 60
UR5120200530 0.5 2 4 3 30 70 UR5120300120 0.1 3 6 4.5 20 60
UR5120250108 0.1 2.5 4 4 8 50 UR5120300126 0.1 3 6 4.5 26 65
UR5120250110 0.1 2.5 4 4 10 50 UR5120300130 0.1 3 6 4.5 30 70
UR5120250112 0.1 2.5 4 4 12 50 UR5120300135 0.1 3 6 4.5 35 70
UR5120250114 0.1 2.5 4 4 14 50 UR5120300140 0.1 3 6 4.5 40 80
UR5120250116 0.1 2.5 4 4 16 50 UR5120300208 0.2 3 6 4.5 8 50
UR5120250120 0.1 2.5 4 4 20 50 UR5120300210 0.2 3 6 4.5 10 50
UR5120250126 0.1 2.5 4 4 26 60 UR5120300212 0.2 3 6 4.5 12 50
UR5120250130 0.1 2.5 4 4 30 70 UR5120300214 0.2 3 6 4.5 14 60
UR5120250208 0.2 2.5 4 4 8 50 UR5120300216 0.2 3 6 4.5 16 60
UR5120250210 0.2 2.5 4 4 10 50 UR5120300220 0.2 3 6 4.5 20 60
UR5120250212 0.2 2.5 4 4 12 50 UR5120300226 0.2 3 6 4.5 26 65
UR5120250214 0.2 2.5 4 4 14 50 UR5120300230 0.2 3 6 4.5 30 70
UR5120250216 0.2 2.5 4 4 16 50 UR5120300235 0.2 3 6 4.5 35 70
UR5120250220 0.2 2.5 4 4 20 50 UR5120300240 0.2 3 6 4.5 40 80
UR5120250226 0.2 2.5 4 4 26 60 UR5120300308 0.3 3 6 4.5 8 50
144 KORLOY
UR5
t50-&3"/$&
ØD Ød
DATA
Ø0.2 ~ Ø6 0 ~ -0.012mm
h5
HELIX ±0.01 ±0.01 Ø8 ~ Ø20 0 ~ -0.015mm
Corner R p.484
13°

1
2
(mm)
UR5120300310 0.3 3 6 4.5 10 50 UR5120400145 0.1 4 6 6 45 90

UR5120300312 0.3 3 6 4.5 12 50 UR5120400150 0.1 4 6 6 50 100
UR5120300314 0.3 3 6 4.5 14 60 UR5120400210 0.2 4 6 6 10 50
UR5120300316 0.3 3 6 4.5 16 60 UR5120400212 0.2 4 6 6 12 50
UR5120300320 0.3 3 6 4.5 20 60 UR5120400214 0.2 4 6 6 14 60
UR5120300326 0.3 3 6 4.5 26 65 UR5120400216 0.2 4 6 6 16 60
UR5120300330 0.3 3 6 4.5 30 70 UR5120400220 0.2 4 6 6 20 60
UR5120300335 0.3 3 6 4.5 35 70 UR5120400226 0.2 4 6 6 26 65
UR5120300340 0.3 3 6 4.5 40 80 UR5120400230 0.2 4 6 6 30 65
UR5120300508 0.5 3 6 4.5 8 50 UR5120400235 0.2 4 6 6 35 70
UR5120300510 0.5 3 6 4.5 10 50 UR5120400240 0.2 4 6 6 40 80
UR5120300512 0.5 3 6 4.5 12 50 UR5120400245 0.2 4 6 6 45 90
UR5120300514 0.5 3 6 4.5 14 60 UR5120400250 0.2 4 6 6 50 100
UR5120300516 0.5 3 6 4.5 16 60 UR5120400310 0.3 4 6 6 10 50
UR5120300520 0.5 3 6 4.5 20 60 UR5120400312 0.3 4 6 6 12 50
UR5120300526 0.5 3 6 4.5 26 65 UR5120400314 0.3 4 6 6 14 60
UR5120300530 0.5 3 6 4.5 30 70 UR5120400316 0.3 4 6 6 16 60
UR5120300535 0.5 3 6 4.5 35 70 UR5120400320 0.3 4 6 6 20 60
UR5120300540 0.5 3 6 4.5 40 80 UR5120400326 0.3 4 6 6 26 65
UR5120301008 1 3 6 4.5 8 50 UR5120400330 0.3 4 6 6 30 65
UR5120301010 1 3 6 4.5 10 50 UR5120400335 0.3 4 6 6 35 70
UR5120301012 1 3 6 4.5 12 50 UR5120400340 0.3 4 6 6 40 80
UR5120301014 1 3 6 4.5 14 60 UR5120400345 0.3 4 6 6 45 90
UR5120301016 1 3 6 4.5 16 60 UR5120400350 0.3 4 6 6 50 100
UR5120301020 1 3 6 4.5 20 60 UR5120400510 0.5 4 6 6 10 50
UR5120301026 1 3 6 4.5 26 65 UR5120400512 0.5 4 6 6 12 50
UR5120301030 1 3 6 4.5 30 70 UR5120400514 0.5 4 6 6 14 60
UR5120301035 1 3 6 4.5 35 70 UR5120400516 0.5 4 6 6 16 60
UR5120301040 1 3 6 4.5 40 80 UR5120400520 0.5 4 6 6 20 60
UR5120400110 0.1 4 6 6 10 50 UR5120400526 0.5 4 6 6 26 65
UR5120400112 0.1 4 6 6 12 50 UR5120400530 0.5 4 6 6 30 65
UR5120400114 0.1 4 6 6 14 60 UR5120400535 0.5 4 6 6 35 70
UR5120400116 0.1 4 6 6 16 60 UR5120400540 0.5 4 6 6 40 80
UR5120400120 0.1 4 6 6 20 60 UR5120400545 0.5 4 6 6 45 90
UR5120400126 0.1 4 6 6 26 65 UR5120400550 0.5 4 6 6 50 100
UR5120400130 0.1 4 6 6 30 65 UR5120401010 1 4 6 6 10 50
UR5120400135 0.1 4 6 6 35 70 UR5120401012 1 4 6 6 12 50
UR5120400140 0.1 4 6 6 40 80 UR5120401014 1 4 6 6 14 60
KORLOY
Y 145
Endmill
U-Star Endmill
UR5
t50-&3"/$&
ØD Ød
DATA
Ø0.2 ~ Ø6 0 ~ -0.012mm
h5
HELIX ±0.01 ±0.01 Ø8 ~ Ø20 0 ~ -0.015mm
Corner R p.484
13°

1
2
(mm)
1 4 6 6 16 60 UR51208010 1 8 8 12 25 70
UR5120401020 1 4 6 6 20 60 UR51208010100 1 8 8 20 35 100
UR5120401026 1 4 6 6 26 65 UR51208015 1.5 8 8 12 25 70
UR5120401030 1 4 6 6 30 65 UR51208020 2 8 8 12 25 70
UR5120401035 1 4 6 6 35 70 UR51210001 0.1 10 10 15 30 75
UR5120401040 1 4 6 6 40 80 UR51210002 0.2 10 10 15 30 75
UR5120401045 1 4 6 6 45 90 UR51210003 0.3 10 10 15 30 75
UR5120401050 1 4 6 6 50 100 UR51210003100 0.3 10 10 25 40 100
UR51205001 0.1 5 6 8 15 60 UR51210005 0.5 10 10 15 30 75
UR51205002 0.2 5 6 8 15 60 UR51210005100 0.5 10 10 25 40 100
UR51205003 0.3 5 6 8 15 60 UR51210010 1 10 10 15 30 75
UR51205005 0.5 5 6 8 15 60 UR51210010100 1 10 10 25 40 100
UR51205010 1 5 6 8 15 60 UR51210015 1.5 10 10 15 30 75
UR51205015 1.5 5 6 8 15 60 UR51210020 2 10 10 15 30 75
UR51205020 2 5 6 8 15 60 UR51212002 0.2 12 12 18 32 80
UR51206001 0.1 6 6 9 20 60 UR51212003 0.3 12 12 18 32 80
UR51206002 0.2 6 6 9 20 60 UR51212003110 0.3 12 12 30 45 110
UR51206003 0.3 6 6 9 20 60 UR51212005 0.5 12 12 18 32 80
UR5120600390 0.3 6 6 15 30 90 UR51212005110 0.5 12 12 30 45 110
UR51206005 0.5 6 6 9 20 60 UR51212010 1 12 12 18 32 80
UR5120600590 0.5 6 6 15 30 90 UR51212010110 1 12 12 30 45 110
UR51206010 1 6 6 9 20 60 UR51212015 1.5 12 12 18 32 80
UR5120601090 1 6 6 15 30 90 UR51212020 2 12 12 18 32 80
UR51206015 1.5 6 6 9 20 60 UR51216005 0.5 16 16 20 35 100
UR51206020 2 6 6 9 20 60 UR51216005150 0.5 16 16 35 50 150
UR51208001 0.1 8 8 12 25 70 UR51216010 1 16 16 20 35 100
UR51208002 0.2 8 8 12 25 70 UR51216010150 1 16 16 35 50 150
UR51208003 0.3 8 8 12 25 70 UR51220005 0.5 20 20 25 40 100
UR51208003100 0.3 8 8 20 35 100 UR51220005150 0.5 20 20 40 55 150
UR51208005 0.5 8 8 12 25 70 UR51220010 1 20 20 25 40 100
UR51208005100 0.5 8 8 20 35 100 UR51220010150 1 20 20 40 55 150
○ ◎ ◎ ○ ○
146 KORLOY
UR5
R542 2 Flutes tapered neck radius endmill
t50-&3"/$&
ØD Ød
CARBIDE 30 R AlCrN
DATA
Ø0.2 ~ Ø4 0 ~ -0.012mm h5
HELIX ±0.01
Corner R p.484

1
2
(mm)
R ØD Ød ℓ1 ℓ2 ℓ3 ѡ L R ØD Ød ℓ1 ℓ2 ℓ3 ѡ L
UR5420020050101 0.05 0.2 4 0.3 0.4 1 1 40 UR542004010105 0.1 0.4 4 0.6 0.8 5 1 50
UR5420020050102 0.05 0.2 4 0.3 0.4 2 1 40 UR542004010106 0.1 0.4 4 0.6 0.8 6 1 50
UR5420020050103 0.05 0.2 4 0.3 0.4 3 1 40 UR542004010202 0.1 0.4 4 0.6 0.8 2 2 50
UR5420020050201 0.05 0.2 4 0.3 0.4 1 2 40 UR542004010203 0.1 0.4 4 0.6 0.8 3 2 50
UR5420020050202 0.05 0.2 4 0.3 0.4 2 2 40 UR542004010204 0.1 0.4 4 0.6 0.8 4 2 50
UR5420020050203 0.05 0.2 4 0.3 0.4 3 2 40 UR542004010205 0.1 0.4 4 0.6 0.8 5 2 50
UR5420030050102 0.05 0.3 4 0.5 0.6 2 1 40 UR542004010206 0.1 0.4 4 0.6 0.8 6 2 50
UR5420030050103 0.05 0.3 4 0.5 0.6 3 1 40 UR5420050050104 0.05 0.5 4 0.7 1 4 1 50
UR5420030050104 0.05 0.3 4 0.5 0.6 4 1 40 UR5420050050106 0.05 0.5 4 0.7 1 6 1 50
UR5420030050105 0.05 0.3 4 0.5 0.6 5 1 40 UR5420050050108 0.05 0.5 4 0.7 1 8 1 50
UR5420030050202 0.05 0.3 4 0.5 0.6 2 2 40 UR5420050050110 0.05 0.5 4 0.7 1 10 1 50
UR5420030050203 0.05 0.3 4 0.5 0.6 3 2 40 UR5420050050204 0.05 0.5 4 0.7 1 4 2 50
UR5420030050204 0.05 0.3 4 0.5 0.6 4 2 40 UR5420050050206 0.05 0.5 4 0.7 1 6 2 50
UR5420030050205 0.05 0.3 4 0.5 0.6 5 2 40 UR5420050050208 0.05 0.5 4 0.7 1 8 2 50
UR5420040050102 0.05 0.4 4 0.6 0.8 2 1 50 UR5420050050210 0.05 0.5 4 0.7 1 10 2 50
UR5420040050103 0.05 0.4 4 0.6 0.8 3 1 50 UR542005010104 0.1 0.5 4 0.7 1 4 1 50
UR5420040050104 0.05 0.4 4 0.6 0.8 4 1 50 UR542005010106 0.1 0.5 4 0.7 1 6 1 50
UR5420040050105 0.05 0.4 4 0.6 0.8 5 1 50 UR542005010108 0.1 0.5 4 0.7 1 8 1 50
UR5420040050106 0.05 0.4 4 0.6 0.8 6 1 50 UR542005010110 0.1 0.5 4 0.7 1 10 1 50
UR5420040050202 0.05 0.4 4 0.6 0.8 2 2 50 UR542005010204 0.1 0.5 4 0.7 1 4 2 50
UR5420040050203 0.05 0.4 4 0.6 0.8 3 2 50 UR542005010206 0.1 0.5 4 0.7 1 6 2 50
UR5420040050204 0.05 0.4 4 0.6 0.8 4 2 50 UR542005010208 0.1 0.5 4 0.7 1 8 2 50
UR5420040050205 0.05 0.4 4 0.6 0.8 5 2 50 UR542005010210 0.1 0.5 4 0.7 1 10 2 50
UR5420040050206 0.05 0.4 4 0.6 0.8 6 2 50 UR542006010104 0.1 0.6 4 0.9 1.2 4 1 50
UR542004010102 0.1 0.4 4 0.6 0.8 2 1 50 UR542006010106 0.1 0.6 4 0.9 1.2 6 1 50
UR542004010103 0.1 0.4 4 0.6 0.8 3 1 50 UR5420020050101 0.05 0.2 4 0.3 0.4 1 1 40
UR542004010104 0.1 0.4 4 0.6 0.8 4 1 50 UR5420020050102 0.05 0.2 4 0.3 0.4 2 1 40
UR542004010105 0.1 0.4 4 0.6 0.8 5 1 50 UR5420020050103 0.05 0.2 4 0.3 0.4 3 1 40
UR542004010106 0.1 0.4 4 0.6 0.8 6 1 50 UR5420020050201 0.05 0.2 4 0.3 0.4 1 2 40
UR542004010202 0.1 0.4 4 0.6 0.8 2 2 50 UR5420020050202 0.05 0.2 4 0.3 0.4 2 2 40
UR542004010203 0.1 0.4 4 0.6 0.8 3 2 50 UR5420020050203 0.05 0.2 4 0.3 0.4 3 2 40
UR5420040050204 0.05 0.4 4 0.6 0.8 4 2 50 UR5420030050102 0.05 0.3 4 0.5 0.6 2 1 40
UR5420040050205 0.05 0.4 4 0.6 0.8 5 2 50 UR5420030050103 0.05 0.3 4 0.5 0.6 3 1 40
UR5420040050206 0.05 0.4 4 0.6 0.8 6 2 50 UR5420030050104 0.05 0.3 4 0.5 0.6 4 1 40
UR542004010102 0.1 0.4 4 0.6 0.8 2 1 50 UR5420030050105 0.05 0.3 4 0.5 0.6 5 1 40
UR542004010103 0.1 0.4 4 0.6 0.8 3 1 50 UR5420030050202 0.05 0.3 4 0.5 0.6 2 2 40
UR542004010104 0.1 0.4 4 0.6 0.8 4 1 50 UR5420030050203 0.05 0.3 4 0.5 0.6 3 2 40
KORLOY
Y 147
Endmill
U-Star Endmill
UR5
t50-&3"/$&
ØD Ød
CARBIDE 30 R AlCrN
DATA
Ø0.2 ~ Ø4 0 ~ -0.012mm h5
HELIX ±0.01
Corner R p.484

1
2
(mm)
UR5420030050204 0.05 0.3 4 0.5 0.6 4 2 40 UR542005010210 0.1 0.5 4 0.7 1 10 2 50

UR5420030050205 0.05 0.3 4 0.5 0.6 5 2 40 UR542006010104 0.1 0.6 4 0.9 1.2 4 1 50
UR5420040050102 0.05 0.4 4 0.6 0.8 2 1 50 UR542006010106 0.1 0.6 4 0.9 1.2 6 1 50
UR5420040050103 0.05 0.4 4 0.6 0.8 3 1 50 UR542006010108 0.1 0.6 4 0.9 1.2 8 1 50
UR5420040050104 0.05 0.4 4 0.6 0.8 4 1 50 UR542006010110 0.1 0.6 4 0.9 1.2 10 1 50
UR5420040050105 0.05 0.4 4 0.6 0.8 5 1 50 UR542006010112 0.1 0.6 4 0.9 1.2 12 1 50
UR5420040050106 0.05 0.4 4 0.6 0.8 6 1 50 UR542006010204 0.1 0.6 4 0.9 1.2 4 2 50
UR5420040050202 0.05 0.4 4 0.6 0.8 2 2 50 UR542006010206 0.1 0.6 4 0.9 1.2 6 2 50
UR5420040050203 0.05 0.4 4 0.6 0.8 3 2 50 UR542006010208 0.1 0.6 4 0.9 1.2 8 2 50
UR5420040050204 0.05 0.4 4 0.6 0.8 4 2 50 UR542006010210 0.1 0.6 4 0.9 1.2 10 2 50
UR5420040050205 0.05 0.4 4 0.6 0.8 5 2 50 UR542006010212 0.1 0.6 4 0.9 1.2 12 2 50
UR5420040050206 0.05 0.4 4 0.6 0.8 6 2 50 UR542006020104 0.2 0.6 4 0.9 1.2 4 1 50
UR542004010102 0.1 0.4 4 0.6 0.8 2 1 50 UR542006020106 0.2 0.6 4 0.9 1.2 6 1 50
UR542004010103 0.1 0.4 4 0.6 0.8 3 1 50 UR542006020108 0.2 0.6 4 0.9 1.2 8 1 50
UR542004010104 0.1 0.4 4 0.6 0.8 4 1 50 UR542006020110 0.2 0.6 4 0.9 1.2 10 1 50
UR542004010105 0.1 0.4 4 0.6 0.8 5 1 50 UR542006020112 0.2 0.6 4 0.9 1.2 12 1 50
UR542004010106 0.1 0.4 4 0.6 0.8 6 1 50 UR542006020204 0.2 0.6 4 0.9 1.2 4 2 50
UR542004010202 0.1 0.4 4 0.6 0.8 2 2 50 UR542006020206 0.2 0.6 4 0.9 1.2 6 2 50
UR542004010203 0.1 0.4 4 0.6 0.8 3 2 50 UR542006020208 0.2 0.6 4 0.9 1.2 8 2 50
UR542004010204 0.1 0.4 4 0.6 0.8 4 2 50 UR542006020210 0.2 0.6 4 0.9 1.2 10 2 50
UR542004010205 0.1 0.4 4 0.6 0.8 5 2 50 UR542006020212 0.2 0.6 4 0.9 1.2 12 2 50
UR542004010206 0.1 0.4 4 0.6 0.8 6 2 50 UR542008010104 0.1 0.8 4 1.2 1.6 4 1 50
UR5420050050104 0.05 0.5 4 0.7 1 4 1 50 UR542008010106 0.1 0.8 4 1.2 1.6 6 1 50
UR5420050050106 0.05 0.5 4 0.7 1 6 1 50 UR542008010108 0.1 0.8 4 1.2 1.6 8 1 50
UR5420050050108 0.05 0.5 4 0.7 1 8 1 50 UR542008010110 0.1 0.8 4 1.2 1.6 10 1 50
UR5420050050110 0.05 0.5 4 0.7 1 10 1 50 UR542008010112 0.1 0.8 4 1.2 1.6 12 1 50
UR5420050050204 0.05 0.5 4 0.7 1 4 2 50 UR542008010116 0.1 0.8 4 1.2 1.6 16 1 50
UR5420050050206 0.05 0.5 4 0.7 1 6 2 50 UR542008010204 0.1 0.8 4 1.2 1.6 4 2 50
UR5420050050208 0.05 0.5 4 0.7 1 8 2 50 UR542008010206 0.1 0.8 4 1.2 1.6 6 2 50
UR5420050050210 0.05 0.5 4 0.7 1 10 2 50 UR542008010208 0.1 0.8 4 1.2 1.6 8 2 50
UR542005010104 0.1 0.5 4 0.7 1 4 1 50 UR542008010210 0.1 0.8 4 1.2 1.6 10 2 50
UR542005010106 0.1 0.5 4 0.7 1 6 1 50 UR542008010212 0.1 0.8 4 1.2 1.6 12 2 50
UR542005010108 0.1 0.5 4 0.7 1 8 1 50 UR542008010216 0.1 0.8 4 1.2 1.6 16 2 50
UR542005010110 0.1 0.5 4 0.7 1 10 1 50 UR542008020104 0.2 0.8 4 1.2 1.6 4 1 50
UR542005010204 0.1 0.5 4 0.7 1 4 2 50 UR542008020106 0.2 0.8 4 1.2 1.6 6 1 50
UR542005010206 0.1 0.5 4 0.7 1 6 2 50 UR542008020108 0.2 0.8 4 1.2 1.6 8 1 50
UR542005010208 0.1 0.5 4 0.7 1 8 2 50 UR542008020110 0.2 0.8 4 1.2 1.6 10 1 50
148 KORLOY
UR5
t50-&3"/$&
ØD Ød
CARBIDE 30 R AlCrN
DATA
Ø0.2 ~ Ø4 0 ~ -0.012mm h5
HELIX ±0.01
Corner R p.484

1
2
(mm)
UR542008020112 0.2 0.8 4 1.2 1.6 12 1 50 UR542010020150 0.2 1 6 1.5 2.5 50 1 90

UR542008020116 0.2 0.8 4 1.2 1.6 16 1 50 UR542010020206 0.2 1 4 1.5 2.5 6 2 50
UR542008020204 0.2 0.8 4 1.2 1.6 4 2 50 UR542010020208 0.2 1 4 1.5 2.5 8 2 50
UR542008020206 0.2 0.8 4 1.2 1.6 6 2 50 UR542010020210 0.2 1 4 1.5 2.5 10 2 50
UR542008020208 0.2 0.8 4 1.2 1.6 8 2 50 UR542010020212 0.2 1 4 1.5 2.5 12 2 50
UR542008020210 0.2 0.8 4 1.2 1.6 10 2 50 UR542010020216 0.2 1 4 1.5 2.5 16 2 50
UR542008020212 0.2 0.8 4 1.2 1.6 12 2 50 UR542010020220 0.2 1 4 1.5 2.5 20 2 50
UR542008020216 0.2 0.8 4 1.2 1.6 16 2 50 UR542010020225 0.2 1 4 1.5 2.5 25 2 60
UR542010010106 0.1 1 4 1.5 2.5 6 1 50 UR542010020230 0.2 1 4 1.5 2.5 30 2 70
UR542010010108 0.1 1 4 1.5 2.5 8 1 50 UR542010020240 0.2 1 4 1.5 2.5 40 2 80
UR542010010110 0.1 1 4 1.5 2.5 10 1 50 UR542010020250 0.2 1 6 1.5 2.5 50 2 90
UR542010010112 0.1 1 4 1.5 2.5 12 1 50 UR542012010108 0.1 1.2 4 1.8 3 8 1 50
UR542010010116 0.1 1 4 1.5 2.5 16 1 50 UR542012010112 0.1 1.2 4 1.8 3 12 1 50
UR542010010120 0.1 1 4 1.5 2.5 20 1 50 UR542012010116 0.1 1.2 4 1.8 3 16 1 50
UR542010010125 0.1 1 4 1.5 2.5 25 1 60 UR542012010120 0.1 1.2 4 1.8 3 20 1 50
UR542010010130 0.1 1 4 1.5 2.5 30 1 70 UR542012010125 0.1 1.2 4 1.8 3 25 1 60
UR542010010140 0.1 1 4 1.5 2.5 40 1 80 UR542012010130 0.1 1.2 4 1.8 3 30 1 70
UR542010010150 0.1 1 6 1.5 2.5 50 1 90 UR542012010208 0.1 1.2 4 1.8 3 8 2 50
UR542010010206 0.1 1 4 1.5 2.5 6 2 50 UR542012010212 0.1 1.2 4 1.8 3 12 2 50
UR542010010208 0.1 1 4 1.5 2.5 8 2 50 UR542012010216 0.1 1.2 4 1.8 3 16 2 50
UR542010010210 0.1 1 4 1.5 2.5 10 2 50 UR542012010220 0.1 1.2 4 1.8 3 20 2 50
UR542010010212 0.1 1 4 1.5 2.5 12 2 50 UR542012010225 0.1 1.2 4 1.8 3 25 2 60
UR542010010216 0.1 1 4 1.5 2.5 16 2 50 UR542012010230 0.1 1.2 4 1.8 3 30 2 70
UR542010010220 0.1 1 4 1.5 2.5 20 2 50 UR542012020108 0.2 1.2 4 1.8 3 8 1 50
UR542010010225 0.1 1 4 1.5 2.5 25 2 60 UR542012020112 0.2 1.2 4 1.8 3 12 1 50
UR542010010230 0.1 1 4 1.5 2.5 30 2 70 UR542012020116 0.2 1.2 4 1.8 3 16 1 50
UR542010010240 0.1 1 4 1.5 2.5 40 2 80 UR542012020120 0.2 1.2 4 1.8 3 20 1 50
UR542010010250 0.1 1 6 1.5 2.5 50 2 90 UR542012020125 0.2 1.2 4 1.8 3 25 1 60
UR542010020106 0.2 1 4 1.5 2.5 6 1 50 UR542012020130 0.2 1.2 4 1.8 3 30 1 70
UR542010020108 0.2 1 4 1.5 2.5 8 1 50 UR542012020208 0.2 1.2 4 1.8 3 8 2 50
UR542010020110 0.2 1 4 1.5 2.5 10 1 50 UR542012020212 0.2 1.2 4 1.8 3 12 2 50
UR542010020112 0.2 1 4 1.5 2.5 12 1 50 UR542012020216 0.2 1.2 4 1.8 3 16 2 50
UR542010020116 0.2 1 4 1.5 2.5 16 1 50 UR542012020220 0.2 1.2 4 1.8 3 20 2 50
UR542010020120 0.2 1 4 1.5 2.5 20 1 50 UR542012020225 0.2 1.2 4 1.8 3 25 2 60
UR542010020125 0.2 1 4 1.5 2.5 25 1 60 UR542012020230 0.2 1.2 4 1.8 3 30 2 70
UR542010020130 0.2 1 4 1.5 2.5 30 1 70 UR542015010108 0.1 1.5 4 2.3 3 8 1 50
UR542010020140 0.2 1 4 1.5 2.5 40 1 80 UR542015010110 0.1 1.5 4 2.3 3 10 1 50
KORLOY
Y 149
Endmill
U-Star Endmill
UR5
t50-&3"/$&
ØD Ød
CARBIDE 30 R AlCrN
DATA
Ø0.2 ~ Ø4 0 ~ -0.012mm h5
HELIX ±0.01
Corner R p.484

1
2
(mm)
UR542015010112 0.1 1.5 4 2.3 3 12 1 50 UR542015030116 0.3 1.5 4 2.3 3 16 1 50

UR542015010116 0.1 1.5 4 2.3 3 16 1 50 UR542015030120 0.3 1.5 4 2.3 3 20 1 50
UR542015010120 0.1 1.5 4 2.3 3 20 1 50 UR542015030125 0.3 1.5 4 2.3 3 25 1 60
UR542015010125 0.1 1.5 4 2.3 3 25 1 60 UR542015030130 0.3 1.5 4 2.3 3 30 1 70
UR542015010130 0.1 1.5 4 2.3 3 30 1 70 UR542015030140 0.3 1.5 4 2.3 3 40 1 80
UR542015010140 0.1 1.5 4 2.3 3 40 1 80 UR542015030150 0.3 1.5 4 2.3 3 50 1 90
UR542015010150 0.1 1.5 4 2.3 3 50 1 90 UR542015030208 0.3 1.5 4 2.3 3 8 2 50
UR542015010208 0.1 1.5 4 2.3 3 8 2 50 UR542015030210 0.3 1.5 4 2.3 3 10 2 50
UR542015010210 0.1 1.5 4 2.3 3 10 2 50 UR542015030212 0.3 1.5 4 2.3 3 12 2 50
UR542015010212 0.1 1.5 4 2.3 3 12 2 50 UR542015030216 0.3 1.5 4 2.3 3 16 2 50
UR542015010216 0.1 1.5 4 2.3 3 16 2 50 UR542015030220 0.3 1.5 4 2.3 3 20 2 50
UR542015010220 0.1 1.5 4 2.3 3 20 2 50 UR542015030225 0.3 1.5 4 2.3 3 25 2 60
UR542015010225 0.1 1.5 4 2.3 3 25 2 60 UR542015030230 0.3 1.5 4 2.3 3 30 2 70
UR542015010230 0.1 1.5 4 2.3 3 30 2 70 UR542015030240 0.3 1.5 6 2.3 3 40 2 80
UR542015010240 0.1 1.5 6 2.3 3 40 2 80 UR542015030250 0.3 1.5 6 2.3 3 50 2 90
UR542015010250 0.1 1.5 6 2.3 3 50 2 90 UR542020010110 0.1 2 4 2 5 10 1 50
UR542015020108 0.2 1.5 4 2.3 3 8 1 50 UR542020010112 0.1 2 4 2 5 12 1 50
UR542015020110 0.2 1.5 4 2.3 3 10 1 50 UR542020010116 0.1 2 4 2 5 16 1 50
UR542015020112 0.2 1.5 4 2.3 3 12 1 50 UR542020010120 0.1 2 4 2 5 20 1 50
UR542015020116 0.2 1.5 4 2.3 3 16 1 50 UR542020010125 0.1 2 4 2 5 25 1 60
UR542015020120 0.2 1.5 4 2.3 3 20 1 50 UR542020010130 0.1 2 4 2 5 30 1 70
UR542015020125 0.2 1.5 4 2.3 3 25 1 60 UR542020010140 0.1 2 6 2 5 40 1 80
UR542015020130 0.2 1.5 4 2.3 3 30 1 70 UR542020010150 0.1 2 6 2 5 50 1 100
UR542015020140 0.2 1.5 4 2.3 3 40 1 80 UR542020010160 0.1 2 6 2 5 60 1 100
UR542015020150 0.2 1.5 4 2.3 3 50 1 90 UR542020010180 0.1 2 6 2 5 80 1 140
UR542015020208 0.2 1.5 4 2.3 3 8 2 50 UR542020010210 0.1 2 4 2 5 10 2 50
UR542015020210 0.2 1.5 4 2.3 3 10 2 50 UR542020010212 0.1 2 4 2 5 12 2 50
UR542015020212 0.2 1.5 4 2.3 3 12 2 50 UR542020010216 0.1 2 4 2 5 16 2 50
UR542015020216 0.2 1.5 4 2.3 3 16 2 50 UR542020010220 0.1 2 4 2 5 20 2 50
UR542015020220 0.2 1.5 4 2.3 3 20 2 50 UR542020010225 0.1 2 4 2 5 25 2 60
UR542015020225 0.2 1.5 4 2.3 3 25 2 60 UR542020010230 0.1 2 4 2 5 30 2 70
UR542015020230 0.2 1.5 4 2.3 3 30 2 70 UR542020010240 0.1 2 6 2 5 40 2 80
UR542015020240 0.2 1.5 6 2.3 3 40 2 80 UR542020010250 0.1 2 6 2 5 50 2 100
UR542015020250 0.2 1.5 6 2.3 3 50 2 90 UR542020010260 0.1 2 6 2 5 60 2 100
UR542015030108 0.3 1.5 4 2.3 3 8 1 50 UR542020010280 0.1 2 8 2 5 80 2 140
UR542015030110 0.3 1.5 4 2.3 3 10 1 50 UR542020020110 0.2 2 4 2 5 10 1 50
UR542015030112 0.3 1.5 4 2.3 3 12 1 50 UR542020020112 0.2 2 4 2 5 12 1 50
150 KORLOY
UR5
t50-&3"/$&
ØD Ød
CARBIDE 30 R AlCrN
DATA
Ø0.2 ~ Ø4 0 ~ -0.012mm h5
HELIX ±0.01
Corner R p.484

1
2
(mm)
UR542020020116 0.2 2 4 2 5 16 1 50 UR542020030280 0.3 2 8 2 5 80 2 140

UR542020020120 0.2 2 4 2 5 20 1 50 UR542020050110 0.5 2 4 2 5 10 1 50
UR542020020125 0.2 2 4 2 5 25 1 60 UR542020050112 0.5 2 4 2 5 12 1 50
UR542020020130 0.2 2 4 2 5 30 1 70 UR542020050116 0.5 2 4 2 5 16 1 50
UR542020020140 0.2 2 6 2 5 40 1 80 UR542020050120 0.5 2 4 2 5 20 1 50
UR542020020150 0.2 2 6 2 5 50 1 100 UR542020050125 0.5 2 4 2 5 25 1 60
UR542020020160 0.2 2 6 2 5 60 1 100 UR542020050130 0.5 2 4 2 5 30 1 70
UR542020020180 0.2 2 6 2 5 80 1 140 UR542020050140 0.5 2 6 2 5 40 1 80
UR542020020210 0.2 2 4 2 5 10 2 50 UR542020050150 0.5 2 6 2 5 50 1 100
UR542020020212 0.2 2 4 2 5 12 2 50 UR542020050160 0.5 2 6 2 5 60 1 100
UR542020020216 0.2 2 4 2 5 16 2 50 UR542020050180 0.5 2 6 2 5 80 1 140
UR542020020220 0.2 2 4 2 5 20 2 50 UR542020050210 0.5 2 4 2 5 10 2 50
UR542020020225 0.2 2 4 2 5 25 2 60 UR542020050212 0.5 2 4 2 5 12 2 50
UR542020020230 0.2 2 4 2 5 30 2 70 UR542020050216 0.5 2 4 2 5 16 2 50
UR542020020240 0.2 2 6 2 5 40 2 80 UR542020050220 0.5 2 4 2 5 20 2 50
UR542020020250 0.2 2 6 2 5 50 2 100 UR542020050225 0.5 2 4 2 5 25 2 60
UR542020020260 0.2 2 6 2 5 60 2 100 UR542020050230 0.5 2 4 2 5 30 2 70
UR542020020280 0.2 2 8 2 5 80 2 140 UR542020050240 0.5 2 6 2 5 40 2 80
UR542020030110 0.3 2 4 2 5 10 1 50 UR542020050250 0.5 2 6 2 5 50 2 100
UR542020030112 0.3 2 4 2 5 12 1 50 UR542020050260 0.5 2 6 2 5 60 2 100
UR542020030116 0.3 2 4 2 5 16 1 50 UR542020050280 0.5 2 8 2 5 80 2 140
UR542020030120 0.3 2 4 2 5 20 1 50 UR542030020116 0.2 3 6 4.5 6 16 1 60
UR542020030125 0.3 2 4 2 5 25 1 60 UR542030020120 0.2 3 6 4.5 6 20 1 65
UR542020030130 0.3 2 4 2 5 30 1 70 UR542030020130 0.2 3 6 4.5 6 30 1 70
UR542020030140 0.3 2 6 2 5 40 1 80 UR542030020140 0.2 3 6 4.5 6 40 1 80
UR542020030150 0.3 2 6 2 5 50 1 100 UR542030020150 0.2 3 6 4.5 6 50 1 90
UR542020030160 0.3 2 6 2 5 60 1 100 UR542030020160 0.2 3 6 4.5 6 60 1 100
UR542020030180 0.3 2 6 2 5 80 1 140 UR542030020216 0.2 3 6 4.5 6 16 2 60
UR542020030210 0.3 2 4 2 5 10 2 50 UR542030020220 0.2 3 6 4.5 6 20 2 65
UR542020030212 0.3 2 4 2 5 12 2 50 UR542030020230 0.2 3 6 4.5 6 30 2 70
UR542020030216 0.3 2 4 2 5 16 2 50 UR542030020240 0.2 3 6 4.5 6 40 2 80
UR542020030220 0.3 2 4 2 5 20 2 50 UR542030020250 0.2 3 8 4.5 6 50 2 90
UR542020030225 0.3 2 4 2 5 25 2 60 UR542030020260 0.2 3 8 4.5 6 60 2 100
UR542020030230 0.3 2 4 2 5 30 2 70 UR542030020270 0.2 3 8 4.5 6 70 2 120
UR542020030240 0.3 2 6 2 5 40 2 80 UR542030030116 0.3 3 6 4.5 6 16 1 60
UR542020030250 0.3 2 6 2 5 50 2 100 UR542030030120 0.3 3 6 4.5 6 20 1 65
UR542020030260 0.3 2 6 2 5 60 2 100 UR542030030130 0.3 3 6 4.5 6 30 1 70
KORLOY
Y 151
Endmill
U-Star Endmill
UR5
t50-&3"/$&
ØD Ød
CARBIDE 30 R AlCrN
DATA
Ø0.2 ~ Ø4 0 ~ -0.012mm h5
HELIX ±0.01
Corner R p.484

1
2
(mm)
UR542030030140 0.3 3 6 4.5 6 40 1 80 0.2 4 6 6 8 50 1 100

UR542030030150 0.3 3 6 4.5 6 50 1 90 UR542040020160 0.2 4 6 6 8 60 1 110
UR542030030160 0.3 3 6 4.5 6 60 1 100 UR542040020170 0.2 4 8 6 8 70 1 120
UR542030030216 0.3 3 6 4.5 6 16 2 60 UR542040020240 0.2 4 8 6 8 40 2 90
UR542030030220 0.3 3 6 4.5 6 20 2 65 UR542040020250 0.2 4 8 6 8 50 2 100
UR542030030230 0.3 3 6 4.5 6 30 2 70 UR542040020260 0.2 4 8 6 8 60 2 110
UR542030030240 0.3 3 6 4.5 6 40 2 80 UR542040020270 0.2 4 10 6 8 70 2 120
UR542030030250 0.3 3 8 4.5 6 50 2 90 UR542040030140 0.3 4 6 6 8 40 1 90
UR542030030260 0.3 3 8 4.5 6 60 2 100 UR542040030150 0.3 4 6 6 8 50 1 100
UR542030030270 0.3 3 8 4.5 6 70 2 120 UR542040030160 0.3 4 6 6 8 60 1 110
UR542030050116 0.5 3 6 4.5 6 16 1 60 UR542040030170 0.3 4 8 6 8 70 1 120
UR542030050120 0.5 3 6 4.5 6 20 1 65 UR542040030240 0.3 4 8 6 8 40 2 90
UR542030050130 0.5 3 6 4.5 6 30 1 70 UR542040030250 0.3 4 8 6 8 50 2 100
UR542030050140 0.5 3 6 4.5 6 40 1 80 UR542040030260 0.3 4 8 6 8 60 2 110
UR542030050150 0.5 3 6 4.5 6 50 1 90 UR542040030270 0.3 4 10 6 8 70 2 120
UR542030050160 0.5 3 6 4.5 6 60 1 100 UR542040050140 0.5 4 6 6 8 40 1 90
UR542030050216 0.5 3 6 4.5 6 16 2 60 UR542040050150 0.5 4 6 6 8 50 1 100
UR542030050220 0.5 3 6 4.5 6 20 2 65 UR542040050160 0.5 4 6 6 8 60 1 110
UR542030050230 0.5 3 6 4.5 6 30 2 70 UR542040050170 0.5 4 8 6 8 70 1 120
UR542030050240 0.5 3 6 4.5 6 40 2 80 UR542040050240 0.5 4 8 6 8 40 2 90
UR542030050250 0.5 3 8 4.5 6 50 2 90 UR542040050250 0.5 4 8 6 8 50 2 100
UR542030050260 0.5 3 8 4.5 6 60 2 100 UR542040050260 0.5 4 8 6 8 60 2 110
UR542030050270 0.5 3 8 4.5 6 70 2 120 UR542040050270 0.5 4 10 6 8 70 2 120
UR542040020140 0.2 4 6 6 8 40 1 90
○ ◎ ◎ ○ ○
152 KORLOY
UR504 t50-&3"/$&
ØD Ød
CARBIDE 40 R "M$S/
DATA
Ø3 ~ Ø20 0 ~ -0.03mm h5
HELIX ±0.02
Corner R p.484
ØD Ød
(mm)
UR50403002 0.2 3 6 8 60 UR50410003075 0.3 10 10 25 75

UR50403002S4 0.2 3 4 8 60 UR50410005 0.5 10 10 25 100
UR50403003 0.3 3 6 8 60 UR50410005075 0.5 10 10 25 75
UR50403005 0.5 3 6 8 60 UR50410010 1 10 10 25 100
UR50403005S4 0.5 3 4 8 60 UR50410010075 1 10 10 25 75
UR50404002 0.2 4 6 10 70 UR50410015 1.5 10 10 25 100
UR50404002S4 0.2 4 4 10 70 UR50410020 2 10 10 25 100
UR50404003 0.3 4 6 10 70 UR50410025 2.5 10 10 25 100
UR50404005 0.5 4 6 10 70 UR50412003 0.3 12 12 30 110
UR50404005S4 0.5 4 4 10 70 UR50412003080 0.3 12 12 30 80
UR50404010 1 4 6 10 70 UR50412005 0.5 12 12 30 110
UR50404010S4 1 4 4 10 70 UR50412005080 0.5 12 12 30 80
UR50405002 0.2 5 6 13 90 UR50412010 1 12 12 30 110
UR50405003 0.3 5 6 13 90 UR50412010080 1 12 12 30 80
UR50405003060 0.3 5 6 13 60 UR50412015 1.5 12 12 30 110
UR50405005 0.5 5 6 13 90 UR50412020 2 12 12 30 110
UR50405005060 0.5 5 6 13 60 UR50412025 2.5 12 12 30 110
UR50405010 1 5 6 13 90 UR50412030 3 12 12 30 110
UR50406002 0.2 6 6 13 90 UR50416005 0.5 16 16 32 150
UR50406003 0.3 6 6 15 90 UR50416005100 0.5 16 16 32 100
UR50406003060 0.3 6 6 15 60 UR50416010 1 16 16 32 150
UR50406005 0.5 6 6 15 90 UR50416010100 1 16 16 32 100
UR50406005060 0.5 6 6 15 60 UR50416015 1.5 16 16 32 150
UR50406010 1 6 6 15 90 UR50416015100 1.5 16 16 32 100
UR50406010060 1 6 6 15 60 UR50416020 2 16 16 32 150
UR50408003 0.3 8 8 20 100 UR50416020100 2 16 16 32 100
UR50408003070 0.3 8 8 20 70 UR50420005 0.5 20 20 38 150
UR50408005 0.5 8 8 20 100 UR50420005100 0.5 20 20 38 100
UR50408005070 0.5 8 8 20 70 UR50420010 1 20 20 38 150
UR50408010 1 8 8 20 100 UR50420010100 1 20 20 38 100
UR50408010070 1 8 8 20 70 UR50420015 1.5 20 20 38 150
UR50408015 1.5 8 8 20 100 UR50420015100 1.5 20 20 38 100
UR50408020 2 8 8 20 100 UR50420020 2 20 20 38 150
UR50410003 0.3 10 10 25 100 UR50420020100 2 20 20 38 100
○ ◎ ◎ ○ ○
KORLOY 153
Endmill
U-Star Endmill
UR5
t50-&3"/$&
ØD Ød
CARBIDE 30 R AlCrN
DATA
Ø1 ~ Ø4 0 ~ -0.012mm h5
HELIX ±0.01
Corner R p.485
θ 13°

1
2
(mm)
UR544010010106 0.1 1 4 1.5 2.5 6 1 50 UR544010020225 0.2 1 4 1.5 2.5 25 2 60

UR544010010108 0.1 1 4 1.5 2.5 8 1 50 UR544010020230 0.2 1 4 1.5 2.5 30 2 70
UR544010010110 0.1 1 4 1.5 2.5 10 1 50 UR544010020240 0.2 1 4 1.5 2.5 40 2 80
UR544010010112 0.1 1 4 1.5 2.5 12 1 50 UR544010020250 0.2 1 6 1.5 2.5 50 2 90
UR544010010116 0.1 1 4 1.5 2.5 16 1 50 UR544012010108 0.1 1.2 4 1.8 3 8 2 50
UR544010010120 0.1 1 4 1.5 2.5 20 1 50 UR544012010112 0.1 1.2 4 1.8 3 12 1 50
UR544010010125 0.1 1 4 1.5 2.5 25 1 60 UR544012010116 0.1 1.2 4 1.8 3 16 1 50
UR544010010130 0.1 1 4 1.5 2.5 30 1 70 UR544012010120 0.1 1.2 4 1.8 3 20 1 50
UR544010010140 0.1 1 4 1.5 2.5 40 1 80 UR544012010125 0.1 1.2 4 1.8 3 25 1 60
UR544010010150 0.1 1 4 1.5 2.5 50 1 90 UR544012010130 0.1 1.2 4 1.8 3 30 1 70
UR544010010206 0.1 1 4 1.5 2.5 6 1 50 UR544012010208 0.1 1.2 4 1.8 3 8 1 50
UR544010010208 0.1 1 4 1.5 2.5 8 2 50 UR544012010212 0.1 1.2 4 1.8 3 12 2 50
UR544010010210 0.1 1 4 1.5 2.5 10 2 50 UR544012010216 0.1 1.2 4 1.8 3 16 2 50
UR544010010212 0.1 1 4 1.5 2.5 12 2 50 UR544012010220 0.1 1.2 4 1.8 3 20 2 50
UR544010010216 0.1 1 4 1.5 2.5 16 2 50 UR544012010225 0.1 1.2 4 1.8 3 25 2 60
UR544010010220 0.1 1 4 1.5 2.5 20 2 50 UR544012010230 0.1 1.2 4 1.8 3 30 2 70
UR544010010225 0.1 1 4 1.5 2.5 25 2 60 UR544012020108 0.2 1.2 4 1.8 3 8 2 50
UR544010010230 0.1 1 4 1.5 2.5 30 2 70 UR544012020112 0.2 1.2 4 1.8 3 12 1 50
UR544010010240 0.1 1 4 1.5 2.5 40 2 80 UR544012020116 0.2 1.2 4 1.8 3 16 1 50
UR544010010250 0.1 1 6 1.5 2.5 50 2 90 UR544012020120 0.2 1.2 4 1.8 3 20 1 50
UR544010020106 0.2 1 4 1.5 2.5 6 2 50 UR544012020125 0.2 1.2 4 1.8 3 25 1 60
UR544010020108 0.2 1 4 1.5 2.5 8 1 50 UR544012020130 0.2 1.2 4 1.8 3 30 1 70
UR544010020110 0.2 1 4 1.5 2.5 10 1 50 UR544012020208 0.2 1.2 4 1.8 3 8 1 50
UR544010020112 0.2 1 4 1.5 2.5 12 1 50 UR544012020212 0.2 1.2 4 1.8 3 12 2 50
UR544010020116 0.2 1 4 1.5 2.5 16 1 50 UR544012020216 0.2 1.2 4 1.8 3 16 2 50
UR544010020120 0.2 1 4 1.5 2.5 20 1 50 UR544012020220 0.2 1.2 4 1.8 3 20 2 50
UR544010020125 0.2 1 4 1.5 2.5 25 1 60 UR544012020225 0.2 1.2 4 1.8 3 25 2 60
UR544010020130 0.2 1 4 1.5 2.5 30 1 70 UR544012020230 0.2 1.2 4 1.8 3 30 2 70
UR544010020140 0.2 1 4 1.5 2.5 40 1 80 UR544015010108 0.1 1.5 4 2.3 3 8 2 50
UR544010020150 0.2 1 4 1.5 2.5 50 1 90 UR544015010110 0.1 1.5 4 2.3 3 10 1 50
UR544010020206 0.2 1 4 1.5 2.5 6 1 50 UR544015010112 0.1 1.5 4 2.3 3 12 1 50
UR544010020208 0.2 1 4 1.5 2.5 8 2 50 UR544015010116 0.1 1.5 4 2.3 3 16 1 50
UR544010020210 0.2 1 4 1.5 2.5 10 2 50 UR544015010120 0.1 1.5 4 2.3 3 20 1 50
UR544010020212 0.2 1 4 1.5 2.5 12 2 50 UR544015010125 0.1 1.5 4 2.3 3 25 1 60
UR544010020216 0.2 1 4 1.5 2.5 16 2 50 UR544015010130 0.1 1.5 4 2.3 3 30 1 70
UR544010020220 0.2 1 4 1.5 2.5 20 2 50 UR544015010140 0.1 1.5 4 2.3 3 40 1 80
154 KORLOY
UR5
t50-&3"/$&
ØD Ød
CARBIDE 30 R AlCrN
DATA
Ø1 ~ Ø4 0 ~ -0.012mm h5
HELIX ±0.01
Corner R p.485
θ 13°

1
2
(mm)
UR544015010150 0.1 1.5 4 2.3 3 50 1 90 UR544015030150 0.3 1.5 4 2.3 3 50 1 90

UR544015010208 0.1 1.5 4 2.3 3 8 1 50 UR544015030208 0.3 1.5 4 2.3 3 8 1 50
UR544015010210 0.1 1.5 4 2.3 3 10 2 50 UR544015030210 0.3 1.5 4 2.3 3 10 2 50
UR544015010212 0.1 1.5 4 2.3 3 12 2 50 UR544015030212 0.3 1.5 4 2.3 3 12 2 50
UR544015010216 0.1 1.5 4 2.3 3 16 2 50 UR544015030216 0.3 1.5 4 2.3 3 16 2 50
UR544015010220 0.1 1.5 4 2.3 3 20 2 50 UR544015030220 0.3 1.5 4 2.3 3 20 2 50
UR544015010225 0.1 1.5 4 2.3 3 25 2 60 UR544015030225 0.3 1.5 4 2.3 3 25 2 60
UR544015010230 0.1 1.5 4 2.3 3 30 2 70 UR544015030230 0.3 1.5 4 2.3 3 30 2 70
UR544015010240 0.1 1.5 6 2.3 3 40 2 80 UR544015030240 0.3 1.5 6 2.3 3 40 2 80
UR544015010250 0.1 1.5 6 2.3 3 50 2 90 UR544015030250 0.3 1.5 6 2.3 3 50 2 90
UR544015020108 0.2 1.5 4 2.3 3 8 2 50 UR544020010110 0.1 2 4 2 5 10 2 50
UR544015020110 0.2 1.5 4 2.3 3 10 1 50 UR544020010112 0.1 2 4 2 5 12 1 50
UR544015020112 0.2 1.5 4 2.3 3 12 1 50 UR544020010116 0.1 2 4 2 5 16 1 50
UR544015020116 0.2 1.5 4 2.3 3 16 1 50 UR544020010120 0.1 2 4 2 5 20 1 50
UR544015020120 0.2 1.5 4 2.3 3 20 1 50 UR544020010125 0.1 2 4 2 5 25 1 60
UR544015020125 0.2 1.5 4 2.3 3 25 1 60 UR544020010130 0.1 2 4 2 5 30 1 70
UR544015020130 0.2 1.5 4 2.3 3 30 1 70 UR544020010140 0.1 2 6 2 5 40 1 80
UR544015020140 0.2 1.5 4 2.3 3 40 1 80 UR544020010150 0.1 2 6 2 5 50 1 100
UR544015020150 0.2 1.5 4 2.3 3 50 1 90 UR544020010160 0.1 2 6 2 5 60 1 100
UR544015020208 0.2 1.5 4 2.3 3 8 1 50 UR544020010180 0.1 2 6 2 5 80 1 140
UR544015020210 0.2 1.5 4 2.3 3 10 2 50 UR544020010210 0.1 2 4 2 5 10 1 50
UR544015020212 0.2 1.5 4 2.3 3 12 2 50 UR544020010212 0.1 2 4 2 5 12 2 50
UR544015020216 0.2 1.5 4 2.3 3 16 2 50 UR544020010216 0.1 2 4 2 5 16 2 50
UR544015020220 0.2 1.5 4 2.3 3 20 2 50 UR544020010220 0.1 2 4 2 5 20 2 50
UR544015020225 0.2 1.5 4 2.3 3 25 2 60 UR544020010225 0.1 2 4 2 5 25 2 60
UR544015020230 0.2 1.5 4 2.3 3 30 2 70 UR544020010230 0.1 2 4 2 5 30 2 70
UR544015020240 0.2 1.5 6 2.3 3 40 2 80 UR544020010240 0.1 2 6 2 5 40 2 80
UR544015020250 0.2 1.5 6 2.3 3 50 2 90 UR544020010250 0.1 2 6 2 5 50 2 100
UR544015030108 0.3 1.5 4 2.3 3 8 2 50 UR544020010260 0.1 2 6 2 5 60 2 100
UR544015030110 0.3 1.5 4 2.3 3 10 1 50 UR544020010280 0.1 2 8 2 5 80 2 140
UR544015030112 0.3 1.5 4 2.3 3 12 1 50 UR544020020110 0.2 2 4 2 5 10 2 50
UR544015030116 0.3 1.5 4 2.3 3 16 1 50 UR544020020112 0.2 2 4 2 5 12 1 50
UR544015030120 0.3 1.5 4 2.3 3 20 1 50 UR544020020116 0.2 2 4 2 5 16 1 50
UR544015030125 0.3 1.5 4 2.3 3 25 1 60 UR544020020120 0.2 2 4 2 5 20 1 50
UR544015030130 0.3 1.5 4 2.3 3 30 1 70 UR544020020125 0.2 2 4 2 5 25 1 60
UR544015030140 0.3 1.5 4 2.3 3 40 1 80 UR544020020130 0.2 2 4 2 5 30 1 70
KORLOY
Y 155
Endmill
U-Star Endmill
UR5
t50-&3"/$&
ØD Ød
CARBIDE 30 R AlCrN
DATA
Ø1 ~ Ø4 0 ~ -0.012mm h5
HELIX ±0.01
Corner R p.485
θ 13°

1
2
(mm)
UR544020020140 0.2 2 6 2 5 40 1 80 UR544020050116 0.5 2 4 2 5 16 1 50

UR544020020150 0.2 2 6 2 5 50 1 100 UR544020050120 0.5 2 4 2 5 20 1 50
UR544020020160 0.2 2 6 2 5 60 1 100 UR544020050125 0.5 2 4 2 5 25 1 60
UR544020020180 0.2 2 6 2 5 80 1 140 UR544020050130 0.5 2 4 2 5 30 1 70
UR544020020210 0.2 2 4 2 5 10 1 50 UR544020050140 0.5 2 6 2 5 40 1 80
UR544020020212 0.2 2 4 2 5 12 2 50 UR544020050150 0.5 2 6 2 5 50 1 100
UR544020020216 0.2 2 4 2 5 16 2 50 UR544020050160 0.5 2 6 2 5 60 1 100
UR544020020220 0.2 2 4 2 5 20 2 50 UR544020050180 0.5 2 6 2 5 80 1 140
UR544020020225 0.2 2 4 2 5 25 2 60 UR544020050210 0.5 2 4 2 5 10 1 50
UR544020020230 0.2 2 4 2 5 30 2 70 UR544020050212 0.5 2 4 2 5 12 2 50
UR544020020240 0.2 2 6 2 5 40 2 80 UR544020050216 0.5 2 4 2 5 16 2 50
UR544020020250 0.2 2 6 2 5 50 2 100 UR544020050220 0.5 2 4 2 5 20 2 50
UR544020020260 0.2 2 6 2 5 60 2 100 UR544020050225 0.5 2 4 2 5 25 2 60
UR544020020280 0.2 2 8 2 5 80 2 140 UR544020050230 0.5 2 4 2 5 30 2 70
UR544020030110 0.3 2 4 2 5 10 2 50 UR544020050240 0.5 2 6 2 5 40 2 80
UR544020030112 0.3 2 4 2 5 12 1 50 UR544020050250 0.5 2 6 2 5 50 2 100
UR544020030116 0.3 2 4 2 5 16 1 50 UR544020050260 0.5 2 6 2 5 60 2 100
UR544020030120 0.3 2 4 2 5 20 1 50 UR544020050280 0.5 2 8 2 5 80 2 140
UR544020030125 0.3 2 4 2 5 25 1 60 UR544030020116 0.2 3 6 4.5 6 16 2 60
UR544020030130 0.3 2 4 2 5 30 1 70 UR544030020120 0.2 3 6 4.5 6 20 1 65
UR544020030140 0.3 2 6 2 5 40 1 80 UR544030020130 0.2 3 6 4.5 6 30 1 70
UR544020030150 0.3 2 6 2 5 50 1 100 UR544030020140 0.2 3 6 4.5 6 40 1 80
UR544020030160 0.3 2 6 2 5 60 1 100 UR544030020150 0.2 3 6 4.5 6 50 1 90
UR544020030180 0.3 2 6 2 5 80 1 140 UR544030020160 0.2 3 6 4.5 6 60 1 100
UR544020030210 0.3 2 4 2 5 10 1 50 UR544030020216 0.2 3 6 4.5 6 16 1 60
UR544020030212 0.3 2 4 2 5 12 2 50 UR544030020220 0.2 3 6 4.5 6 20 2 65
UR544020030216 0.3 2 4 2 5 16 2 50 UR544030020230 0.2 3 6 4.5 6 30 2 70
UR544020030220 0.3 2 4 2 5 20 2 50 UR544030020240 0.2 3 6 4.5 6 40 2 80
UR544020030225 0.3 2 4 2 5 25 2 60 UR544030020250 0.2 3 8 4.5 6 50 2 90
UR544020030230 0.3 2 4 2 5 30 2 70 UR544030020260 0.2 3 8 4.5 6 60 2 100
UR544020030240 0.3 2 6 2 5 40 2 80 UR544030020270 0.2 3 8 4.5 6 70 2 120
UR544020030250 0.3 2 6 2 5 50 2 100 UR544030030116 0.3 3 6 4.5 6 16 2 60
UR544020030260 0.3 2 6 2 5 60 2 100 UR544030030120 0.3 3 6 4.5 6 20 1 65
UR544020030280 0.3 2 8 2 5 80 2 140 UR544030030130 0.3 3 6 4.5 6 30 1 70
UR544020050110 0.5 2 4 2 5 10 2 50 UR544030030140 0.3 3 6 4.5 6 40 1 80
UR544020050112 0.5 2 4 2 5 12 1 50 UR544030030150 0.3 3 6 4.5 6 50 1 90
156 KORLOY
UR5
t50-&3"/$&
ØD Ød
CARBIDE 30 R AlCrN
DATA
Ø1 ~ Ø4 0 ~ -0.012mm h5
HELIX ±0.01
Corner R p.485
θ 13°

1
2
(mm)
UR544030030160 0.3 3 6 4.5 6 60 1 100 UR544040020160 0.2 4 6 6 8 60 1 110

UR544030030216 0.3 3 6 4.5 6 16 1 60 UR544040020170 0.2 4 8 6 8 70 1 120
UR544030030220 0.3 3 6 4.5 6 20 2 65 UR544040020240 0.2 4 8 6 8 40 1 90
UR544030030230 0.3 3 6 4.5 6 30 2 70 UR544040020250 0.2 4 8 6 8 50 2 100
UR544030030240 0.3 3 6 4.5 6 40 2 80 UR544040020260 0.2 4 8 6 8 60 2 110
UR544030030250 0.3 3 8 4.5 6 50 2 90 UR544040020270 0.2 4 10 6 8 70 2 120
UR544030030260 0.3 3 8 4.5 6 60 2 100 UR544040030140 0.3 4 6 6 8 40 2 90
UR544030030270 0.3 3 8 4.5 6 70 2 120 UR544040030150 0.3 4 6 6 8 50 1 100
UR544030050116 0.5 3 6 4.5 6 16 2 60 UR544040030160 0.3 4 6 6 8 60 1 110
UR544030050120 0.5 3 6 4.5 6 20 1 65 UR544040030170 0.3 4 8 6 8 70 1 120
UR544030050130 0.5 3 6 4.5 6 30 1 70 UR544040030240 0.3 4 8 6 8 40 1 90
UR544030050140 0.5 3 6 4.5 6 40 1 80 UR544040030250 0.3 4 8 6 8 50 2 100
UR544030050150 0.5 3 6 4.5 6 50 1 90 UR544040030260 0.3 4 8 6 8 60 2 110
UR544030050160 0.5 3 6 4.5 6 60 1 100 UR544040030270 0.3 4 10 6 8 70 2 120
UR544030050216 0.5 3 6 4.5 6 16 1 60 UR544040050140 0.5 4 6 6 8 40 2 90
UR544030050220 0.5 3 6 4.5 6 20 2 65 UR544040050150 0.5 4 6 6 8 50 1 100
UR544030050230 0.5 3 6 4.5 6 30 2 70 UR544040050160 0.5 4 6 6 8 60 1 110
UR544030050240 0.5 3 6 4.5 6 40 2 80 UR544040050170 0.5 4 8 6 8 70 1 120
UR544030050250 0.5 3 8 4.5 6 50 2 90 UR544040050240 0.5 4 8 6 8 40 1 90
UR544030050260 0.5 3 8 4.5 6 60 2 100 UR544040050250 0.5 4 8 6 8 50 2 100
UR544030050270 0.5 3 8 4.5 6 70 2 120 UR544040050260 0.5 4 8 6 8 60 2 110
UR544040020140 0.2 4 6 6 8 40 2 90 UR544040050270 0.5 4 10 6 8 70 2 120
UR544040020150 0.2 4 6 6 8 50 1 100
○ ◎ ◎ ○ ○
KORLOY
Y 157
Endmill
U-Star Endmill
UXR
XR504 4 Flutes multi helix radius endmill
t50-&3"/$&
ØD Ød
CARBIDE 34 36 R AlCrN
DATA
Ø1 ~ Ø20 0 ~ -0.03mm h5
HELIX HELIX ±0.02
Corner R p.486

(mm)
UXR504010005 0.05 1 6 2.5 50 UXR50404003 0.3 4 6 10 70

UXR50401001 0.1 1 6 2.5 50 UXR50404003100S4 0.3 4 4 10 100
UXR50401002 0.2 1 6 2.5 50 UXR50404003S4 0.3 4 4 10 70
UXR50401003 0.3 1 6 2.5 50 UXR50404005 0.5 4 6 10 70
UXR504012005 0.05 1.2 6 3 50 UXR50404005100S4 0.5 4 4 10 100
UXR50401201 0.1 1.2 6 3 50 UXR50404005S4 0.5 4 4 10 70
UXR50401202 0.2 1.2 6 3 50 UXR50404010 1 4 6 10 70
UXR50401203 0.3 1.2 6 3 50 UXR50404010100S4 1 4 4 10 100
UXR504015005 0.05 1.5 6 4 50 UXR50404010S4 1 4 4 10 70
UXR50401501 0.1 1.5 6 4 50 UXR50404501 0.1 4.5 6 11 80
UXR50401502 0.2 1.5 6 4 50 UXR50404502 0.2 4.5 6 11 80
UXR50401503 0.3 1.5 6 4 50 UXR50404503 0.3 4.5 6 11 80
UXR50401505 0.5 1.5 6 4 50 UXR50404505 0.5 4.5 6 11 80
UXR50402001 0.1 2 6 6 50 UXR50405001 0.1 5 6 13 90
UXR50402002 0.2 2 6 6 50 UXR50405002 0.2 5 6 13 90
UXR50402003 0.3 2 6 6 50 UXR50405003 0.3 5 6 13 90
UXR50402005 0.5 2 6 6 50 UXR50405005 0.5 5 6 13 90
UXR50402501 0.1 2.5 6 7 60 UXR50405010 1 5 6 13 90
UXR50402502 0.2 2.5 6 7 60 UXR50405501 0.1 5.5 6 13 90
UXR50402503 0.3 2.5 6 7 60 UXR50405502 0.2 5.5 6 13 90
UXR50402505 0.5 2.5 6 7 60 UXR50405503 0.3 5.5 6 13 90
UXR50403001 0.1 3 6 8 60 UXR50405505 0.5 5.5 6 13 90
UXR50403002 0.2 3 6 8 60 UXR50405510 1 5.5 6 13 90
UXR50403003 0.3 3 6 8 60 UXR50406001 0.1 6 6 15 90
UXR50403005 0.5 3 6 8 60 UXR50406001060 0.1 6 6 15 60
UXR50403010 1 3 6 8 60 UXR50406002 0.2 6 6 15 90
UXR50403501 0.1 3.5 6 10 70 UXR50406002060 0.2 6 6 15 60
UXR50403502 0.2 3.5 6 10 70 UXR50406003 0.3 6 6 15 90
UXR50403503 0.3 3.5 6 10 70 UXR50406005 0.5 6 6 15 90
UXR50403505 0.5 3.5 6 10 70 UXR50406005060 0.5 6 6 15 60
UXR50404001 0.1 4 6 10 70 UXR50406005110 0.5 6 6 15 110
UXR50404001100S4 0.1 4 4 10 100 UXR50406005130 0.5 6 6 15 130
UXR50404001S4 0.1 4 4 10 70 UXR50406010 1 6 6 15 90
UXR50404002 0.2 4 6 10 70 UXR50406010060 1 6 6 15 60
UXR50404002100S4 0.2 4 4 10 100 UXR50406010110 1 6 6 15 110
UXR50404002S4 0.2 4 4 10 70 UXR50406010130 1 6 6 15 130
158 KORLOY
UXR
t50-&3"/$&
ØD Ød
DATA
Ø1 ~ Ø20 0 ~ -0.03mm h5
HELIX HELIX ±0.02
Corner R p.486

(mm)
UXR50406015 1.5 6 6 15 90 UXR50410010130 1 10 10 22 130

UXR50406020 2 6 6 15 90 UXR50410010150 1 10 10 22 150
UXR50407001 0.1 7 8 16 90 UXR50410015 1.5 10 10 25 100
UXR50407002 0.2 7 8 16 90 UXR50410020 2 10 10 25 100
UXR50407003 0.3 7 8 16 90 UXR50410025 2.5 10 10 25 100
UXR50407005 0.5 7 8 16 90 UXR50410030 3 10 10 25 100
UXR50407010 1 7 8 16 90 UXR50410040 4 10 10 25 100
UXR50407020 2 7 8 16 90 UXR50411002 0.2 11 12 25 110
UXR50408001 0.1 8 8 20 100 UXR50411003 0.3 11 12 25 110
UXR50408002 0.2 8 8 20 100 UXR50411005 0.5 11 12 25 110
UXR50408003 0.3 8 8 20 100 UXR50411010 1 11 12 25 110
UXR50408003070 0.3 8 8 20 70 UXR50411020 2 11 12 25 110
UXR50408005 0.5 8 8 20 100 UXR50412001 0.1 12 12 30 110
UXR50408005070 0.5 8 8 20 70 UXR50412002 0.2 12 12 30 110
UXR50408005120 0.5 8 8 20 120 UXR50412003 0.3 12 12 30 110
UXR50408005150 0.5 8 8 20 150 UXR50412003080 0.3 12 12 30 80
UXR50408010 1 8 8 20 100 UXR50412005 0.5 12 12 30 110
UXR50408010070 1 8 8 20 70 UXR50412005080 0.5 12 12 30 80
UXR50408010120 1 8 8 20 120 UXR50412005130 0.5 12 12 30 130
UXR50408010150 1 8 8 20 150 UXR50412005150 0.5 12 12 30 150
UXR50408015 1.5 8 8 20 100 UXR50412010 1 12 12 30 110
UXR50408015070 1.5 8 8 20 70 UXR50412010080 1 12 12 30 80
UXR50408020 2 8 8 20 100 UXR50412010130 1 12 12 30 130
UXR50408020070 2 8 8 20 70 UXR50412010150 1 12 12 30 150
UXR50408025 2.5 8 8 20 100 UXR50412015 1.5 12 12 30 110
UXR50408030 3 8 8 20 100 UXR50412015080 1.5 12 12 30 80
UXR50410001 0.1 10 10 25 100 UXR50412020 2 12 12 30 110
UXR50410002 0.2 10 10 25 100 UXR50412020080 2 12 12 30 80
UXR50410003 0.3 10 10 25 100 UXR50412025 2.5 12 12 30 110
UXR50410003075 0.3 10 10 25 75 UXR50412025080 2.5 12 12 30 80
UXR50410005 0.5 10 10 25 100 UXR50412030 3 12 12 30 110
UXR50410005075 0.5 10 10 25 75 UXR50412030080 3 12 12 30 80
UXR50410005130 0.5 10 10 22 130 UXR50412040 4 12 12 30 110
UXR50410005150 0.5 10 10 22 150 UXR50412050 5 12 12 30 110
UXR50410010 1 10 10 25 100 UXR50414005 0.5 14 16 35 150
UXR50410010075 1 10 10 25 75 UXR50414010 1 14 16 35 150
KORLOY
Y 159
Endmill
U-Star Endmill
UXR
t50-&3"/$&
ØD Ød
DATA
Ø1 ~ Ø20 0 ~ -0.03mm h5
HELIX HELIX ±0.02
Corner R p.486

(mm)
UXR50414020 2 14 16 35 150 UXR50420005 0.5 20 20 45 110

UXR50416005 0.5 16 16 40 100 UXR50420005150 0.5 20 20 45 150
UXR50416005150 0.5 16 16 40 150 UXR50420010 1 20 20 45 110
UXR50416010 1 16 16 40 100 UXR50420010150 1 20 20 45 150
UXR50416010150 1 16 16 40 150 UXR50420015 1.5 20 20 45 110
UXR50416015 1.5 16 16 40 100 UXR50420015150 1.5 20 20 45 150
UXR50416015150 1.5 16 16 40 150 UXR50420020 2 20 20 45 110
UXR50416020 2 16 16 40 100 UXR50420020150 2 20 20 45 150
UXR50416020150 2 16 16 40 150 UXR50420030 3 20 20 45 110
UXR50416030 3 16 16 40 100
○ ◎ ◎ ○ ○
160 KORLOY
UXR
XR514 4 flutes multi helix neck radius endmill
t50-&3"/$&
ØD Ød
DATA
Ø1 ~ Ø20 0 ~ -0.03mm h5
HELIX HELIX ±0.02
Corner R p.485
13°

1

2
(mm)
UXR51401000503 0.05 1 4 1.5 3 50 UXR51401200503 0.05 1.2 4 1.8 3 50

UXR51401000504 0.05 1 4 1.5 4 50 UXR51401200504 0.05 1.2 4 1.8 4 50
UXR51401000506 0.05 1 4 1.5 6 50 UXR51401200506 0.05 1.2 4 1.8 6 50
UXR51401000508 0.05 1 4 1.5 8 50 UXR51401200508 0.05 1.2 4 1.8 8 50
UXR51401000510 0.05 1 4 1.5 10 50 UXR51401200510 0.05 1.2 4 1.8 10 50
UXR51401000512 0.05 1 4 1.5 12 50 UXR51401200512 0.05 1.2 4 1.8 12 50
UXR51401000514 0.05 1 4 1.5 14 50 UXR51401200516 0.05 1.2 4 1.8 16 50
UXR51401000516 0.05 1 4 1.5 16 50 UXR51401200520 0.05 1.2 4 1.8 20 50
UXR51401000520 0.05 1 4 1.5 20 50 UXR5140120103 0.1 1.2 4 1.8 3 50
UXR5140100103 0.1 1 4 1.5 3 50 UXR5140120104 0.1 1.2 4 1.8 4 50
UXR5140100104 0.1 1 4 1.5 4 50 UXR5140120106 0.1 1.2 4 1.8 6 50
UXR5140100106 0.1 1 4 1.5 6 50 UXR5140120108 0.1 1.2 4 1.8 8 50
UXR5140100108 0.1 1 4 1.5 8 50 UXR5140120110 0.1 1.2 4 1.8 10 50
UXR5140100110 0.1 1 4 1.5 10 50 UXR5140120112 0.1 1.2 4 1.8 12 50
UXR5140100112 0.1 1 4 1.5 12 50 UXR5140120116 0.1 1.2 4 1.8 16 50
UXR5140100114 0.1 1 4 1.5 14 50 UXR5140120120 0.1 1.2 4 1.8 20 50
UXR5140100116 0.1 1 4 1.5 16 50 UXR5140120203 0.2 1.2 4 1.8 3 50
UXR5140100120 0.1 1 4 1.5 20 50 UXR5140120204 0.2 1.2 4 1.8 4 50
UXR5140100203 0.2 1 4 1.5 3 50 UXR5140120206 0.2 1.2 4 1.8 6 50
UXR5140100204 0.2 1 4 1.5 4 50 UXR5140120208 0.2 1.2 4 1.8 8 50
UXR5140100206 0.2 1 4 1.5 6 50 UXR5140120210 0.2 1.2 4 1.8 10 50
UXR5140100208 0.2 1 4 1.5 8 50 UXR5140120212 0.2 1.2 4 1.8 12 50
UXR5140100210 0.2 1 4 1.5 10 50 UXR5140120216 0.2 1.2 4 1.8 16 50
UXR5140100212 0.2 1 4 1.5 12 50 UXR5140120220 0.2 1.2 4 1.8 20 50
UXR5140100214 0.2 1 4 1.5 14 50 UXR5140120303 0.3 1.2 4 1.8 3 50
UXR5140100216 0.2 1 4 1.5 16 50 UXR5140120304 0.3 1.2 4 1.8 4 50
UXR5140100220 0.2 1 4 1.5 20 50 UXR5140120306 0.3 1.2 4 1.8 6 50
UXR5140100303 0.3 1 4 1.5 3 50 UXR5140120308 0.3 1.2 4 1.8 8 50
UXR5140100304 0.3 1 4 1.5 4 50 UXR5140120310 0.3 1.2 4 1.8 10 50
UXR5140100306 0.3 1 4 1.5 6 50 UXR5140120312 0.3 1.2 4 1.8 12 50
UXR5140100308 0.3 1 4 1.5 8 50 UXR5140120316 0.3 1.2 4 1.8 16 50
UXR5140100310 0.3 1 4 1.5 10 50 UXR5140120320 0.3 1.2 4 1.8 20 50
UXR5140100312 0.3 1 4 1.5 12 50 UXR51401500504 0.05 1.5 4 2.3 4 50
UXR5140100314 0.3 1 4 1.5 14 50 UXR51401500506 0.05 1.5 4 2.3 6 50
UXR5140100316 0.3 1 4 1.5 16 50 UXR51401500508 0.05 1.5 4 2.3 8 50
UXR5140100320 0.3 1 4 1.5 20 50 UXR51401500510 0.05 1.5 4 2.3 10 50
KORLOY
Y 161
Endmill
U-Star Endmill
UXR
t50-&3"/$&
ØD Ød
DATA
Ø1 ~ Ø20 0 ~ -0.03mm h5
HELIX HELIX ±0.02
Corner R p.485
13°

1

2
(mm)
UXR51401500512 0.05 1.5 4 2.3 12 50 UXR5140150504 0.5 1.5 4 2.3 4 50

UXR51401500514 0.05 1.5 4 2.3 14 50 UXR5140150506 0.5 1.5 4 2.3 6 50
UXR51401500516 0.05 1.5 4 2.3 16 50 UXR5140150508 0.5 1.5 4 2.3 8 50
UXR51401500520 0.05 1.5 4 2.3 20 50 UXR5140150510 0.5 1.5 4 2.3 10 50
UXR51401500522 0.05 1.5 4 2.3 22 60 UXR5140150512 0.5 1.5 4 2.3 12 50
UXR51401500526 0.05 1.5 4 2.3 26 60 UXR5140150514 0.5 1.5 4 2.3 14 50
UXR5140150104 0.1 1.5 4 2.3 4 50 UXR5140150516 0.5 1.5 4 2.3 16 50
UXR5140150106 0.1 1.5 4 2.3 6 50 UXR5140150520 0.5 1.5 4 2.3 20 50
UXR5140150108 0.1 1.5 4 2.3 8 50 UXR5140150522 0.5 1.5 4 2.3 22 60
UXR5140150110 0.1 1.5 4 2.3 10 50 UXR5140150526 0.5 1.5 4 2.3 26 60
UXR5140150112 0.1 1.5 4 2.3 12 50 UXR5140200106 0.1 2 4 3 6 50
UXR5140150114 0.1 1.5 4 2.3 14 50 UXR5140200108 0.1 2 4 3 8 50
UXR5140150116 0.1 1.5 4 2.3 16 50 UXR5140200110 0.1 2 4 3 10 50
UXR5140150120 0.1 1.5 4 2.3 20 50 UXR5140200112 0.1 2 4 3 12 50
UXR5140150122 0.1 1.5 4 2.3 22 60 UXR5140200114 0.1 2 4 3 14 50
UXR5140150126 0.1 1.5 4 2.3 26 60 UXR5140200116 0.1 2 4 3 16 50
UXR5140150204 0.2 1.5 4 2.3 4 50 UXR5140200120 0.1 2 4 3 20 50
UXR5140150206 0.2 1.5 4 2.3 6 50 UXR5140200122 0.1 2 4 3 22 60
UXR5140150208 0.2 1.5 4 2.3 8 50 UXR5140200126 0.1 2 4 3 26 60
UXR5140150210 0.2 1.5 4 2.3 10 50 UXR5140200130 0.1 2 4 3 30 70
UXR5140150212 0.2 1.5 4 2.3 12 50 UXR5140200206 0.2 2 4 3 6 50
UXR5140150214 0.2 1.5 4 2.3 14 50 UXR5140200208 0.2 2 4 3 8 50
UXR5140150216 0.2 1.5 4 2.3 16 50 UXR5140200210 0.2 2 4 3 10 50
UXR5140150220 0.2 1.5 4 2.3 20 50 UXR5140200212 0.2 2 4 3 12 50
UXR5140150222 0.2 1.5 4 2.3 22 60 UXR5140200214 0.2 2 4 3 14 50
UXR5140150226 0.2 1.5 4 2.3 26 60 UXR5140200216 0.2 2 4 3 16 50
UXR5140150304 0.3 1.5 4 2.3 4 50 UXR5140200220 0.2 2 4 3 20 50
UXR5140150306 0.3 1.5 4 2.3 6 50 UXR5140200222 0.2 2 4 3 22 60
UXR5140150308 0.3 1.5 4 2.3 8 50 UXR5140200226 0.2 2 4 3 26 60
UXR5140150310 0.3 1.5 4 2.3 10 50 UXR5140200230 0.2 2 4 3 30 70
UXR5140150312 0.3 1.5 4 2.3 12 50 UXR5140200306 0.3 2 4 3 6 50
UXR5140150314 0.3 1.5 4 2.3 14 50 UXR5140200308 0.3 2 4 3 8 50
UXR5140150316 0.3 1.5 4 2.3 16 50 UXR5140200310 0.3 2 4 3 10 50
UXR5140150320 0.3 1.5 4 2.3 20 50 UXR5140200312 0.3 2 4 3 12 50
UXR5140150322 0.3 1.5 4 2.3 22 60 UXR5140200314 0.3 2 4 3 14 50
UXR5140150326 0.3 1.5 4 2.3 26 60 UXR5140200316 0.3 2 4 3 16 50
162 KORLOY
UXR
t50-&3"/$&
ØD Ød
DATA
Ø1 ~ Ø20 0 ~ -0.03mm h5
HELIX HELIX ±0.02
Corner R p.485
13°

1

2
(mm)
UXR5140200320 0.3 2 4 3 20 50 UXR5140250326 0.3 2.5 4 4 26 60

UXR5140200322 0.3 2 4 3 22 60 UXR5140250330 0.3 2.5 4 4 30 70
UXR5140200326 0.3 2 4 3 26 60 UXR5140250508 0.5 2.5 4 4 8 50
UXR5140200330 0.3 2 4 3 30 70 UXR5140250510 0.5 2.5 4 4 10 50
UXR5140200506 0.5 2 4 3 6 50 UXR5140250512 0.5 2.5 4 4 12 50
UXR5140200508 0.5 2 4 3 8 50 UXR5140250514 0.5 2.5 4 4 14 50
UXR5140200510 0.5 2 4 3 10 50 UXR5140250516 0.5 2.5 4 4 16 50
UXR5140200512 0.5 2 4 3 12 50 UXR5140250520 0.5 2.5 4 4 20 50
UXR5140200514 0.5 2 4 3 14 50 UXR5140250526 0.5 2.5 4 4 26 60
UXR5140200516 0.5 2 4 3 16 50 UXR5140250530 0.5 2.5 4 4 30 70
UXR5140200520 0.5 2 4 3 20 50 UXR5140300108 0.1 3 6 4.5 8 50
UXR5140200522 0.5 2 4 3 22 60 UXR5140300110 0.1 3 6 4.5 10 50
UXR5140200526 0.5 2 4 3 26 60 UXR5140300112 0.1 3 6 4.5 12 50
UXR5140200530 0.5 2 4 3 30 70 UXR5140300114 0.1 3 6 4.5 14 60
UXR5140250108 0.1 2.5 4 4 8 50 UXR5140300116 0.1 3 6 4.5 16 60
UXR5140250110 0.1 2.5 4 4 10 50 UXR5140300120 0.1 3 6 4.5 20 60
UXR5140250112 0.1 2.5 4 4 12 50 UXR5140300126 0.1 3 6 4.5 26 65
UXR5140250114 0.1 2.5 4 4 14 50 UXR5140300130 0.1 3 6 4.5 30 70
UXR5140250116 0.1 2.5 4 4 16 50 UXR5140300135 0.1 3 6 4.5 35 70
UXR5140250120 0.1 2.5 4 4 20 50 UXR5140300140 0.1 3 6 4.5 40 80
UXR5140250126 0.1 2.5 4 4 26 60 UXR5140300208 0.2 3 6 4.5 8 50
UXR5140250130 0.1 2.5 4 4 30 70 UXR5140300210 0.2 3 6 4.5 10 50
UXR5140250208 0.2 2.5 4 4 8 50 UXR5140300212 0.2 3 6 4.5 12 50
UXR5140250210 0.2 2.5 4 4 10 50 UXR5140300214 0.2 3 6 4.5 14 60
UXR5140250212 0.2 2.5 4 4 12 50 UXR5140300216 0.2 3 6 4.5 16 60
UXR5140250214 0.2 2.5 4 4 14 50 UXR5140300220 0.2 3 6 4.5 20 60
UXR5140250216 0.2 2.5 4 4 16 50 UXR5140300226 0.2 3 6 4.5 26 65
UXR5140250220 0.2 2.5 4 4 20 50 UXR5140300230 0.2 3 6 4.5 30 70
UXR5140250226 0.2 2.5 4 4 26 60 UXR5140300235 0.2 3 6 4.5 35 70
UXR5140250230 0.2 2.5 4 4 30 70 UXR5140300240 0.2 3 6 4.5 40 80
UXR5140250308 0.3 2.5 4 4 8 50 UXR5140300308 0.3 3 6 4.5 8 50
UXR5140250310 0.3 2.5 4 4 10 50 UXR5140300310 0.3 3 6 4.5 10 50
UXR5140250312 0.3 2.5 4 4 12 50 UXR5140300312 0.3 3 6 4.5 12 50
UXR5140250314 0.3 2.5 4 4 14 50 UXR5140300314 0.3 3 6 4.5 14 60
UXR5140250316 0.3 2.5 4 4 16 50 UXR5140300316 0.3 3 6 4.5 16 60
UXR5140250320 0.3 2.5 4 4 20 50 UXR5140300320 0.3 3 6 4.5 20 60
KORLOY
Y 163
Endmill
U-Star Endmill
UXR
t50-&3"/$&
ØD Ød
DATA
Ø1 ~ Ø20 0 ~ -0.03mm h5
HELIX HELIX ±0.02
Corner R p.485
13°

1

2
(mm)
UXR5140300326 0.3 3 6 4.5 26 65 UXR5140400212 0.2 4 6 6 12 50

UXR5140300330 0.3 3 6 4.5 30 70 UXR5140400214 0.2 4 6 6 14 60
UXR5140300335 0.3 3 6 4.5 35 70 UXR5140400216 0.2 4 6 6 16 60
UXR5140300340 0.3 3 6 4.5 40 80 UXR5140400220 0.2 4 6 6 20 60
UXR5140300508 0.5 3 6 4.5 8 50 UXR5140400226 0.2 4 6 6 26 65
UXR5140300510 0.5 3 6 4.5 10 50 UXR5140400230 0.2 4 6 6 30 70
UXR5140300512 0.5 3 6 4.5 12 50 UXR5140400235 0.2 4 6 6 35 70
UXR5140300514 0.5 3 6 4.5 14 60 UXR5140400240 0.2 4 6 6 40 80
UXR5140300516 0.5 3 6 4.5 16 60 UXR5140400245 0.2 4 6 6 45 90
UXR5140300520 0.5 3 6 4.5 20 60 UXR5140400250 0.2 4 6 6 50 100
UXR5140300526 0.5 3 6 4.5 26 65 UXR5140400310 0.3 4 6 6 10 50
UXR5140300530 0.5 3 6 4.5 30 70 UXR5140400312 0.3 4 6 6 12 50
UXR5140300535 0.5 3 6 4.5 35 70 UXR5140400314 0.3 4 6 6 14 60
UXR5140300540 0.5 3 6 4.5 40 80 UXR5140400316 0.3 4 6 6 16 60
UXR5140301008 1 3 6 4.5 8 50 UXR5140400320 0.3 4 6 6 20 60
UXR5140301010 1 3 6 4.5 10 50 UXR5140400326 0.3 4 6 6 26 65
UXR5140301012 1 3 6 4.5 12 50 UXR5140400330 0.3 4 6 6 30 70
UXR5140301014 1 3 6 4.5 14 60 UXR5140400335 0.3 4 6 6 35 70
UXR5140301016 1 3 6 4.5 16 60 UXR5140400340 0.3 4 6 6 40 80
UXR5140301020 1 3 6 4.5 20 60 UXR5140400345 0.3 4 6 6 45 90
UXR5140301026 1 3 6 4.5 26 65 UXR5140400350 0.3 4 6 6 50 100
UXR5140301030 1 3 6 4.5 30 70 UXR5140400510 0.5 4 6 6 10 50
UXR5140301035 1 3 6 4.5 35 70 UXR5140400512 0.5 4 6 6 12 50
UXR5140301040 1 3 6 4.5 40 80 UXR5140400514 0.5 4 6 6 14 60
UXR5140400110 0.1 4 6 6 10 50 UXR5140400516 0.5 4 6 6 16 60
UXR5140400112 0.1 4 6 6 12 50 UXR5140400520 0.5 4 6 6 20 60
UXR5140400114 0.1 4 6 6 14 60 UXR5140400526 0.5 4 6 6 26 65
UXR5140400116 0.1 4 6 6 16 60 UXR5140400530 0.5 4 6 6 30 70
UXR5140400120 0.1 4 6 6 20 60 UXR5140400535 0.5 4 6 6 35 70
UXR5140400126 0.1 4 6 6 26 65 UXR5140400540 0.5 4 6 6 40 80
UXR5140400130 0.1 4 6 6 30 70 UXR5140400545 0.5 4 6 6 45 90
UXR5140400135 0.1 4 6 6 35 70 UXR5140400550 0.5 4 6 6 50 100
UXR5140400140 0.1 4 6 6 40 80 UXR5140401010 1 4 6 6 10 50
UXR5140400145 0.1 4 6 6 45 90 UXR5140401012 1 4 6 6 12 50
UXR5140400150 0.1 4 6 6 50 100 UXR5140401014 1 4 6 6 14 60
UXR5140400210 0.2 4 6 6 10 50 UXR5140401016 1 4 6 6 16 60
164 KORLOY
UXR
t50-&3"/$&
ØD Ød
DATA
Ø1 ~ Ø20 0 ~ -0.03mm h5
HELIX HELIX ±0.02
Corner R p.485
13°

1

2
(mm)
UXR5140401020 1 4 6 6 20 60 UXR51408010100 1 8 8 20 35 100

UXR5140401026 1 4 6 6 26 65 UXR51408015 1.5 8 8 12 25 70
UXR5140401030 1 4 6 6 30 70 UXR51408020 2 8 8 12 25 70
UXR5140401035 1 4 6 6 35 70 UXR51410001 0.1 10 10 15 30 75
UXR5140401040 1 4 6 6 40 80 UXR51410002 0.2 10 10 15 30 75
UXR5140401045 1 4 6 6 45 90 UXR51410003 0.3 10 10 15 30 75
UXR5140401050 1 4 6 6 50 100 UXR51410003100 0.3 10 10 25 40 100
UXR51405001 0.1 5 6 8 15 60 UXR51410005 0.5 10 10 15 30 75
UXR51405002 0.2 5 6 8 15 60 UXR51410005100 0.5 10 10 25 40 100
UXR51405003 0.3 5 6 8 15 60 UXR51410010 1 10 10 15 30 75
UXR51405005 0.5 5 6 8 15 60 UXR51410010100 1 10 10 25 40 100
UXR51405010 1 5 6 8 15 60 UXR51410015 1.5 10 10 15 30 75
UXR51405015 1.5 5 6 8 15 60 UXR51410020 2 10 10 15 30 75
UXR51405020 2 5 6 8 15 60 UXR51412002 0.2 12 12 18 32 80
UXR51406001 0.1 6 6 9 20 60 UXR51412003 0.3 12 12 18 32 80
UXR51406002 0.2 6 6 9 20 60 UXR51412003110 0.3 12 12 30 45 110
UXR51406003 0.3 6 6 9 20 60 UXR51412005 0.5 12 12 18 32 80
UXR51406003090 0.3 6 6 15 30 90 UXR51412005110 0.5 12 12 30 45 110
UXR51406005 0.5 6 6 9 20 60 UXR51412010 1 12 12 18 32 80
UXR51406005090 0.5 6 6 15 30 90 UXR51412010110 1 12 12 30 45 110
UXR51406010 1 6 6 9 20 60 UXR51412015 1.5 12 12 18 32 80
UXR51406010090 1 6 6 15 30 90 UXR51412020 2 12 12 18 32 80
UXR51406015 1.5 6 6 9 20 60 UXR51416005 0.5 16 16 20 35 100
UXR51406020 2 6 6 9 20 60 UXR51416005150 0.5 16 16 35 50 150
UXR51408001 0.1 8 8 12 25 70 UXR51416010 1 16 16 20 35 100
UXR51408002 0.2 8 8 12 25 70 UXR51416010150 1 16 16 35 50 150
UXR51408003 0.3 8 8 12 25 70 UXR51420005 0.5 20 20 25 40 100
UXR51408003100 0.3 8 8 20 35 100 UXR51420005150 0.5 20 20 40 55 150
UXR51408005 0.5 8 8 12 25 70 UXR51420010 1 20 20 25 40 100
UXR51408005100 0.5 8 8 20 35 100 UXR51420010150 1 20 20 40 55 150
UXR51408010 1 8 8 12 25 70
○ ◎ ◎ ○ ○
KORLOY
Y 165
Endmill
U-Star Endmill
UR5
R506 t50-&3"/$&
ØD Ød
CARBIDE 45 R AlCrN
DATA
Ø6 ~ Ø20 0 ~ -0.03mm h5
HELIX ±0.015
Corner R p.486

(mm)
Designation R ØD ℓ1 ℓ2 L
UR50606003 6 0.3 15 90 6
UR50606005 6 0.5 15 90 6
UR50606010 6 1 15 90 6
UR50608003 8 0.3 20 100 8
UR50608005 8 0.5 20 100 8
UR50608010 8 1 20 100 8
UR50610003 10 0.3 25 100 10
UR50610005 10 0.5 25 100 10
UR50610010 10 1 25 100 10
UR50612003 12 0.3 30 110 12
UR50612005 12 0.5 30 110 12
UR50612010 12 1 30 110 12
UR50616005 16 0.5 32 150 16
UR50616010 16 1 32 150 16
UR50616015 16 1.5 32 150 16
UR50616020 16 2 32 150 16
UR50620005 20 0.5 38 150 20
UR50620010 20 1 38 150 20
UR50620015 20 1.5 38 150 20
UR50620020 20 2 38 150 20
○ ◎ ◎ ○ ○
166 KORLOY
UDR
DR503 3 Flutes double radius endmill
t50-&3"/$&
ØD Ød
CARBIDE 45 R AlCrN
DATA
Ø6 ~ Ø20 0 ~ -0.02mm h5
HELIX ±0.02
Corner R p.487
1

2
(mm)
Designation R ØD Ød R2 ℓ L
UDR50306005 0.5 6 6 6 10 90
UDR50306010 1 6 6 6 10 90
UDR50306020 2 6 6 6 10 90
UDR50308005 0.5 8 8 8 16 100
UDR50308010 1 8 8 8 16 100
UDR50308020 2 8 8 8 16 100
UDR50310005 0.5 10 10 10 20 100
UDR50310010 1 10 10 10 20 100
UDR50310020 2 10 10 10 20 100
UDR50312005 0.5 12 12 12 24 110
UDR50312010 1 12 12 12 24 110
UDR50312020 2 12 12 12 24 110
UDR50316005 0.5 16 16 16 32 150
UDR50316010 1 16 16 16 32 150
UDR50320005 0.5 20 20 20 40 150
UDR50320010 1 20 20 20 40 150
○ ◎ ◎ ○ ○
KORLOY
Y 167
Endmill
U-Star Endmill
USP
SPM4 4 Flutes radius endmill for high speed machining
t50-&3"/$&
ØD Ød
CARBIDE 10 R AlCrN
DATA
Ø1 ~ Ø20 0 ~ -0.03mm h5
HELIX ±0.02
Corner R p.488

13°

(mm)
USPM4010-01 0.1 1 6 1 2.5 50 USPM4100-02 0.2 10 10 10 25 75

USPM4010-02 0.2 1 6 1 2.5 50 USPM4100-02L 0.2 10 10 10 25 100
USPM4010-03 0.3 1 6 1 2.5 50 USPM4100-03 0.3 10 10 10 25 75
USPM4015-02 0.2 1.5 6 1.5 4 50 USPM4100-03L 0.3 10 10 10 25 100
USPM4015-03 0.3 1.5 6 1.5 4 50 USPM4100-05 0.5 10 10 10 25 75
USPM4015-05 0.5 1.5 6 1.5 4 50 USPM4100-05L 0.5 10 10 10 25 100
USPM4020-02 0.2 2 6 2 6 50 USPM4100-10 1 10 10 10 25 75
USPM4020-03 0.3 2 6 2 6 50 USPM4100-10L 1 10 10 10 25 100
USPM4020-05 0.5 2 6 2 6 50 USPM4100-15 1.5 10 10 10 25 75
USPM4030-02 0.2 3 6 3 8 50 USPM4100-15L 1.5 10 10 10 25 100
USPM4030-03 0.3 3 6 3 8 50 USPM4100-20 2 10 10 10 25 75
USPM4030-05 0.5 3 6 3 8 50 USPM4100-20L 2 10 10 10 25 100
USPM4040-02 0.2 4 6 4 10 50 USPM4120-03 0.3 12 12 12 30 80
USPM4040-03 0.3 4 6 4 10 50 USPM4120-03L 0.3 12 12 12 30 110
USPM4040-05 0.5 4 6 4 10 50 USPM4120-05 0.5 12 12 12 30 80
USPM4040-10 1 4 6 4 10 50 USPM4120-05L 0.5 12 12 12 30 110
USPM4060-02 0.2 6 6 6 15 60 USPM4120-10 1 12 12 12 30 80
USPM4060-02L 0.2 6 6 6 15 90 USPM4120-10L 1 12 12 12 30 110
USPM4060-03 0.3 6 6 6 15 60 USPM4120-15 1.5 12 12 12 30 80
USPM4060-03L 0.3 6 6 6 15 90 USPM4120-15L 1.5 12 12 12 30 110
USPM4060-05 0.5 6 6 6 15 60 USPM4120-20 2 12 12 12 30 80
USPM4060-05L 0.5 6 6 6 15 90 USPM4120-20L 2 12 12 12 30 110
USPM4060-10 1 6 6 6 15 60 USPM4120-30 3 12 12 12 30 80
USPM4060-10L 1 6 6 6 15 90 USPM4120-30L 3 12 12 12 30 110
USPM4060-20 2 6 6 6 15 60 USPM4160-05 0.5 16 16 16 35 100
USPM4060-20L 2 6 6 6 15 90 USPM4160-05L 0.5 16 16 16 35 150
USPM4080-02 0.2 8 8 8 20 70 USPM4160-10 1 16 16 16 35 100
USPM4080-02L 0.2 8 8 8 20 100 USPM4160-10L 1 16 16 16 35 150
USPM4080-03 0.3 8 8 8 20 70 USPM4160-20 2 16 16 16 35 100
USPM4080-03L 0.3 8 8 8 20 100 USPM4160-20L 2 16 16 16 35 150
USPM4080-05 0.5 8 8 8 20 70 USPM4200-05 0.5 20 20 20 40 100
USPM4080-05L 0.5 8 8 8 20 100 USPM4200-05L 0.5 20 20 20 40 150
USPM4080-10 1 8 8 8 20 70 USPM4200-10 1 20 20 20 40 100
USPM4080-10L 1 8 8 8 20 100 USPM4200-10L 1 20 20 20 40 150
USPM4080-20 2 8 8 8 20 70 USPM4200-20 2 20 20 20 40 100
USPM4080-20L 2 8 8 8 20 100 USPM4200-20L 2 20 20 20 40 150
○ ◎ ◎ ○ ○
168 KORLOY
UTR
TR504 4 Flutes tapered radius endmill
t50-&3"/$&
ØD Ød
CARBIDE 30 R AlCrN
DATA
Ø0.8 ~ Ø2.5 0 ~ -0.03mm h5
HELIX ±0.01
Corner R p.488
θ 13°

(mm)
UTR504008010104 0.1 0.8 4 1 4 45 UTR504010020112 0.2 1 4 1 12 50

UTR504008010106 0.1 0.8 4 1 6 45 UTR5040100201504 0.2 1 4 1.5 4 50
UTR504008010108 0.1 0.8 4 1 8 45 UTR5040100201506 0.2 1 4 1.5 6 50
UTR5040080101504 0.1 0.8 4 1.5 4 45 UTR5040100201508 0.2 1 4 1.5 8 50
UTR5040080101506 0.1 0.8 4 1.5 6 45 UTR5040100201510 0.2 1 4 1.5 10 50
UTR5040080101508 0.1 0.8 4 1.5 8 45 UTR5040100201512 0.2 1 4 1.5 12 50
UTR504008020104 0.2 0.8 4 1 4 45 UTR504010020204 0.2 1 4 2 4 50
UTR504008020106 0.2 0.8 4 1 6 45 UTR504010020206 0.2 1 4 2 6 50
UTR504008020108 0.2 0.8 4 1 8 45 UTR504010020208 0.2 1 4 2 8 50
UTR5040080201504 0.2 0.8 4 1.5 4 45 UTR504010020210 0.2 1 4 2 10 50
UTR5040080201506 0.2 0.8 4 1.5 6 45 UTR504010020212 0.2 1 4 2 12 50
UTR5040080201508 0.2 0.8 4 1.5 8 45 UTR504010020304 0.2 1 4 3 4 50
UTR504010010104 0.1 1 4 1 4 50 UTR504010020306 0.2 1 4 3 6 50
UTR504010010106 0.1 1 4 1 6 50 UTR504010020308 0.2 1 4 3 8 50
UTR504010010108 0.1 1 4 1 8 50 UTR504010020310 0.2 1 4 3 10 50
UTR504010010110 0.1 1 4 1 10 50 UTR504010020312 0.2 1 4 3 12 50
UTR504010010112 0.1 1 4 1 12 50 UTR504010030104 0.3 1 4 1 4 50
UTR5040100101504 0.1 1 4 1.5 4 50 UTR504010030106 0.3 1 4 1 6 50
UTR5040100101506 0.1 1 4 1.5 6 50 UTR504010030108 0.3 1 4 1 8 50
UTR5040100101508 0.1 1 4 1.5 8 50 UTR504010030110 0.3 1 4 1 10 50
UTR5040100101510 0.1 1 4 1.5 10 50 UTR504010030112 0.3 1 4 1 12 50
UTR5040100101512 0.1 1 4 1.5 12 50 UTR5040100301504 0.3 1 4 1.5 4 50
UTR504010010204 0.1 1 4 2 4 50 UTR5040100301506 0.3 1 4 1.5 6 50
UTR504010010206 0.1 1 4 2 6 50 UTR5040100301508 0.3 1 4 1.5 8 50
UTR504010010208 0.1 1 4 2 8 50 UTR5040100301510 0.3 1 4 1.5 10 50
UTR504010010210 0.1 1 4 2 10 50 UTR5040100301512 0.3 1 4 1.5 12 50
UTR504010010212 0.1 1 4 2 12 50 UTR504010030204 0.3 1 4 2 4 50
UTR504010010304 0.1 1 4 3 4 50 UTR504010030206 0.3 1 4 2 6 50
UTR504010010306 0.1 1 4 3 6 50 UTR504010030208 0.3 1 4 2 8 50
UTR504010010308 0.1 1 4 3 8 50 UTR504010030210 0.3 1 4 2 10 50
UTR504010010310 0.1 1 4 3 10 50 UTR504010030212 0.3 1 4 2 12 50
UTR504010010312 0.1 1 4 3 12 50 UTR504010030304 0.3 1 4 3 4 50
UTR504010020104 0.2 1 4 1 4 50 UTR504010030306 0.3 1 4 3 6 50
UTR504010020106 0.2 1 4 1 6 50 UTR504010030308 0.3 1 4 3 8 50
UTR504010020108 0.2 1 4 1 8 50 UTR504010030310 0.3 1 4 3 10 50
UTR504010020110 0.2 1 4 1 10 50 UTR504010030312 0.3 1 4 3 12 50
KORLOY
Y 169
Endmill
U-Star Endmill
UTR
t50-&3"/$&
ØD Ød
CARBIDE 30 R AlCrN
DATA
Ø0.8 ~ Ø2.5 0 ~ -0.03mm h5
HELIX ±0.01
Corner R p.488
θ 13°

(mm)
UTR504012010106 0.1 1.2 4 1 6 50 UTR504015010106 0.1 1.5 4 1 6 50

UTR504012010108 0.1 1.2 4 1 8 50 UTR504015010108 0.1 1.5 4 1 8 50
UTR504012010110 0.1 1.2 4 1 10 50 UTR504015010110 0.1 1.5 4 1 10 50
UTR504012010112 0.1 1.2 4 1 12 50 UTR504015010112 0.1 1.5 4 1 12 50
UTR504012010206 0.1 1.2 4 2 6 50 UTR504015010116 0.1 1.5 4 1 16 50
UTR504012010208 0.1 1.2 4 2 8 50 UTR504015010120 0.1 1.5 4 1 20 60
UTR504012010210 0.1 1.2 4 2 10 50 UTR504015010206 0.1 1.5 4 2 6 50
UTR504012010212 0.1 1.2 4 2 12 50 UTR504015010208 0.1 1.5 4 2 8 50
UTR504012010306 0.1 1.2 4 3 6 50 UTR504015010210 0.1 1.5 4 2 10 50
UTR504012010308 0.1 1.2 4 3 8 50 UTR504015010212 0.1 1.5 4 2 12 50
UTR504012010310 0.1 1.2 4 3 10 50 UTR504015010216 0.1 1.5 4 2 16 50
UTR504012010312 0.1 1.2 4 3 12 50 UTR504015010220 0.1 1.5 4 2 20 60
UTR504012020106 0.2 1.2 4 1 6 50 UTR504015010306 0.1 1.5 4 3 6 50
UTR504012020108 0.2 1.2 4 1 8 50 UTR504015010308 0.1 1.5 4 3 8 50
UTR504012020110 0.2 1.2 4 1 10 50 UTR504015010310 0.1 1.5 4 3 10 50
UTR504012020112 0.2 1.2 4 1 12 50 UTR504015010312 0.1 1.5 4 3 12 50
UTR504012020206 0.2 1.2 4 2 6 50 UTR504015010316 0.1 1.5 4 3 16 50
UTR504012020208 0.2 1.2 4 2 8 50 UTR504015010320 0.1 1.5 4 3 20 60
UTR504012020210 0.2 1.2 4 2 10 50 UTR504015020106 0.2 1.5 4 1 6 50
UTR504012020212 0.2 1.2 4 2 12 50 UTR504015020108 0.2 1.5 4 1 8 50
UTR504012020306 0.2 1.2 4 3 6 50 UTR504015020110 0.2 1.5 4 1 10 50
UTR504012020308 0.2 1.2 4 3 8 50 UTR504015020112 0.2 1.5 4 1 12 50
UTR504012020310 0.2 1.2 4 3 10 50 UTR504015020116 0.2 1.5 4 1 16 50
UTR504012020312 0.2 1.2 4 3 12 50 UTR504015020120 0.2 1.5 4 1 20 60
UTR504012030106 0.3 1.2 4 1 6 50 UTR504015020206 0.2 1.5 4 2 6 50
UTR504012030108 0.3 1.2 4 1 8 50 UTR504015020208 0.2 1.5 4 2 8 50
UTR504012030110 0.3 1.2 4 1 10 50 UTR504015020210 0.2 1.5 4 2 10 50
UTR504012030112 0.3 1.2 4 1 12 50 UTR504015020212 0.2 1.5 4 2 12 50
UTR504012030206 0.3 1.2 4 2 6 50 UTR504015020216 0.2 1.5 4 2 16 50
UTR504012030208 0.3 1.2 4 2 8 50 UTR504015020220 0.2 1.5 4 2 20 60
UTR504012030210 0.3 1.2 4 2 10 50 UTR504015020306 0.2 1.5 4 3 6 50
UTR504012030212 0.3 1.2 4 2 12 50 UTR504015020308 0.2 1.5 4 3 8 50
UTR504012030306 0.3 1.2 4 3 6 50 UTR504015020310 0.2 1.5 4 3 10 50
UTR504012030308 0.3 1.2 4 3 8 50 UTR504015020312 0.2 1.5 4 3 12 50
UTR504012030310 0.3 1.2 4 3 10 50 UTR504015020316 0.2 1.5 4 3 16 50
UTR504012030312 0.3 1.2 4 3 12 50 UTR504015020320 0.2 1.5 4 3 20 60
170 KORLOY
UTR
t50-&3"/$&
ØD Ød
CARBIDE 30 R AlCrN
DATA
Ø0.8 ~ Ø2.5 0 ~ -0.03mm h5
HELIX ±0.01
Corner R p.488
θ 13°

(mm)
UTR504015030106 0.3 1.5 4 1 6 50 UTR504020020108 0.2 2 4 1 8 50

UTR504015030108 0.3 1.5 4 1 8 50 UTR504020020110 0.2 2 4 1 10 50
UTR504015030110 0.3 1.5 4 1 10 50 UTR504020020112 0.2 2 4 1 12 50
UTR504015030112 0.3 1.5 4 1 12 50 UTR504020020116 0.2 2 4 1 16 50
UTR504015030116 0.3 1.5 4 1 16 50 UTR504020020120 0.2 2 4 1 20 60
UTR504015030120 0.3 1.5 4 1 20 60 UTR504020020125 0.2 2 4 1 25 60
UTR504015030206 0.3 1.5 4 2 6 50 UTR504020020208 0.2 2 4 2 8 50
UTR504015030208 0.3 1.5 4 2 8 50 UTR504020020210 0.2 2 4 2 10 50
UTR504015030210 0.3 1.5 4 2 10 50 UTR504020020212 0.2 2 4 2 12 50
UTR504015030212 0.3 1.5 4 2 12 50 UTR504020020216 0.2 2 4 2 16 50
UTR504015030216 0.3 1.5 4 2 16 50 UTR504020020220 0.2 2 4 2 20 60
UTR504015030220 0.3 1.5 4 2 20 60 UTR504020020225 0.2 2 4 2 25 60
UTR504015030306 0.3 1.5 4 3 6 50 UTR504020020308 0.2 2 4 3 8 50
UTR504015030308 0.3 1.5 4 3 8 50 UTR504020020310 0.2 2 4 3 10 50
UTR504015030310 0.3 1.5 4 3 10 50 UTR504020020312 0.2 2 4 3 12 50
UTR504015030312 0.3 1.5 4 3 12 50 UTR504020020316 0.2 2 4 3 16 50
UTR504015030316 0.3 1.5 4 3 16 50 UTR504020020320 0.2 2 6 3 20 60
UTR504015030320 0.3 1.5 4 3 20 60 UTR504020020325 0.2 2 6 3 25 60
UTR504020010108 0.1 2 4 1 8 50 UTR504020030108 0.3 2 4 1 8 50
UTR504020010110 0.1 2 4 1 10 50 UTR504020030110 0.3 2 4 1 10 50
UTR504020010112 0.1 2 4 1 12 50 UTR504020030112 0.3 2 4 1 12 50
UTR504020010116 0.1 2 4 1 16 50 UTR504020030116 0.3 2 4 1 16 50
UTR504020010120 0.1 2 4 1 20 60 UTR504020030120 0.3 2 4 1 20 60
UTR504020010125 0.1 2 4 1 25 60 UTR504020030125 0.3 2 4 1 25 60
UTR504020010208 0.1 2 4 2 8 50 UTR504020030208 0.3 2 4 2 8 50
UTR504020010210 0.1 2 4 2 10 50 UTR504020030210 0.3 2 4 2 10 50
UTR504020010212 0.1 2 4 2 12 50 UTR504020030212 0.3 2 4 2 12 50
UTR504020010216 0.1 2 4 2 16 50 UTR504020030216 0.3 2 4 2 16 50
UTR504020010220 0.1 2 4 2 20 60 UTR504020030220 0.3 2 4 2 20 60
UTR504020010225 0.1 2 4 2 25 60 UTR504020030225 0.3 2 4 2 25 60
UTR504020010308 0.1 2 4 3 8 50 UTR504020030308 0.3 2 4 3 8 50
UTR504020010310 0.1 2 4 3 10 50 UTR504020030310 0.3 2 4 3 10 50
UTR504020010312 0.1 2 4 3 12 50 UTR504020030312 0.3 2 4 3 12 50
UTR504020010316 0.1 2 4 3 16 50 UTR504020030316 0.3 2 4 3 16 50
UTR504020010320 0.1 2 6 3 20 60 UTR504020030320 0.3 2 6 3 20 60
UTR504020010325 0.1 2 6 3 25 60 UTR504020030325 0.3 2 6 3 25 60
KORLOY
Y 171
Endmill
U-Star Endmill
UTR
t50-&3"/$&
ØD Ød
CARBIDE 30 R AlCrN
DATA
Ø0.8 ~ Ø2.5 0 ~ -0.03mm h5
HELIX ±0.01
Corner R p.488
θ 13°

(mm)
UTR504025010110 0.1 2.5 4 1 10 50 UTR504025020220 0.2 2.5 4 2 20 60

UTR504025010112 0.1 2.5 4 1 12 50 UTR504025020225 0.2 2.5 6 2 25 60
UTR504025010116 0.1 2.5 4 1 16 50 UTR504025020230 0.2 2.5 6 2 30 60
UTR504025010120 0.1 2.5 4 1 20 60 UTR504025020310 0.2 2.5 4 3 10 50
UTR504025010125 0.1 2.5 4 1 25 60 UTR504025020312 0.2 2.5 4 3 12 50
UTR504025010130 0.1 2.5 4 1 30 60 UTR504025020316 0.2 2.5 6 3 16 50
UTR504025010210 0.1 2.5 4 2 10 50 UTR504025020320 0.2 2.5 6 3 20 60
UTR504025010212 0.1 2.5 4 2 12 50 UTR504025020325 0.2 2.5 6 3 25 60
UTR504025010216 0.1 2.5 4 2 16 50 UTR504025020330 0.2 2.5 6 3 30 60
UTR504025010220 0.1 2.5 4 2 20 60 UTR504025030110 0.3 2.5 4 1 10 50
UTR504025010225 0.1 2.5 6 2 25 60 UTR504025030112 0.3 2.5 4 1 12 50
UTR504025010230 0.1 2.5 6 2 30 60 UTR504025030116 0.3 2.5 4 1 16 50
UTR504025010310 0.1 2.5 4 3 10 50 UTR504025030120 0.3 2.5 4 1 20 60
UTR504025010312 0.1 2.5 4 3 12 50 UTR504025030125 0.3 2.5 4 1 25 60
UTR504025010316 0.1 2.5 6 3 16 50 UTR504025030130 0.3 2.5 4 1 30 60
UTR504025010320 0.1 2.5 6 3 20 60 UTR504025030212 0.3 2.5 4 2 12 50
UTR504025010325 0.1 2.5 6 3 25 60 UTR504025030216 0.3 2.5 4 2 16 50
UTR504025010330 0.1 2.5 6 3 30 60 UTR504025030220 0.3 2.5 4 2 20 60
UTR504025020110 0.2 2.5 4 1 10 50 UTR504025030225 0.3 2.5 6 2 25 60
UTR504025020112 0.2 2.5 4 1 12 50 UTR504025030230 0.3 2.5 6 2 30 60
UTR504025020116 0.2 2.5 4 1 16 50 UTR504025030310 0.3 2.5 4 3 10 50
UTR504025020120 0.2 2.5 4 1 20 60 UTR504025030312 0.3 2.5 4 3 12 50
UTR504025020125 0.2 2.5 4 1 25 60 UTR504025030316 0.3 2.5 6 3 16 50
UTR504025020130 0.2 2.5 4 1 30 60 UTR504025030320 0.3 2.5 6 3 20 60
UTR504025020210 0.2 2.5 4 2 10 50 UTR504025030325 0.3 2.5 6 3 25 60
UTR504025020212 0.2 2.5 4 2 12 50 UTR504025030330 0.3 2.5 6 3 30 60
UTR504025020216 0.2 2.5 4 2 16 50
○ ◎ ◎ ○ ○
172 KORLOY
UB5
B502 t50-&3"/$&
ØD Ød
DATA
Ø0.1 ~ Ø6 0 ~ -0.012mm
h5
HELIX ±0.01 ±0.005 Ø6.5 ~ Ø25 0 ~ -0.015mm
Corner R p.489

(mm)
UB502001S 0.05 0.1 4 0.1 40 UB502012S3 0.6 1.2 3 3 50

UB502001 0.05 0.1 4 0.2 40 UB502012S4 0.6 1.2 4 3 50
UB502001S3 0.05 0.1 3 0.2 40 UB502012 0.6 1.2 6 3 50
UB5020015S 0.075 0.15 4 0.15 40 UB502012070 0.6 1.2 6 3 70
UB5020015 0.075 0.15 4 0.3 40 UB502012100 0.6 1.2 6 3 100
UB5020015S3 0.075 0.15 3 0.3 40 UB502015S 0.75 1.5 6 2.5 40
UB502002S 0.1 0.2 4 0.2 40 UB502015S3 0.75 1.5 3 4 50
UB502002 0.1 0.2 4 0.4 40 UB502015S4 0.75 1.5 4 4 50
UB502002S3 0.1 0.2 3 0.4 40 UB502015 0.75 1.5 6 4 50
UB502003S 0.15 0.3 4 0.3 40 UB502015070 0.75 1.5 6 4 70
UB502003 0.15 0.3 4 0.6 40 UB502015100 0.75 1.5 6 4 100
UB502003S3 0.15 0.3 3 0.6 40 UB502020S 1 2 6 3 40
UB502004S 0.2 0.4 4 0.4 40 UB502020S3 1 2 3 5 50
UB502004 0.2 0.4 4 0.8 40 UB502020S4 1 2 4 5 50
UB502004S3 0.2 0.4 3 0.8 40 UB502020 1 2 6 5 50
UB502005S 0.25 0.5 4 0.5 40 UB502020080 1 2 6 5 80
UB502005 0.25 0.5 4 1 40 UB502020100 1 2 6 5 100
UB502005S3 0.25 0.5 3 1 40 UB502025S 1.25 2.5 6 4 40
UB502006S 0.3 0.6 4 0.6 40 UB502025S3 1.25 2.5 3 6 60
UB502006 0.3 0.6 4 1.2 40 UB502025S4 1.25 2.5 4 6 60
UB502006S3 0.3 0.6 3 1.2 40 UB502025 1.25 2.5 6 6 60
UB502007S 0.35 0.7 4 0.7 40 UB502025080 1.25 2.5 6 6 80
UB502007 0.35 0.7 4 1.4 40 UB502025100 1.25 2.5 6 6 100
UB502007S3 0.35 0.7 3 1.4 40 UB502030S 1.5 3 6 4.5 40
UB502008S 0.4 0.8 4 0.8 40 UB502030S3 1.5 3 3 6 60
UB502008 0.4 0.8 4 1.6 40 UB502030S4 1.5 3 4 6 60
UB502008S3 0.4 0.8 3 1.6 40 UB502030 1.5 3 6 6 60
UB502009S 0.45 0.9 4 0.9 40 UB502030080 1.5 3 6 6 80
UB502009 0.45 0.9 4 1.8 40 UB502030100 1.5 3 6 6 100
UB502009S3 0.45 0.9 3 1.8 40 UB502035 1.75 3.5 6 8 70
UB502010S 0.5 1 6 1.5 40 UB502040S 2 4 6 6 50
UB502010S3 0.5 1 3 2.5 50 UB502040S4 2 4 4 8 70
UB502010S4 0.5 1 4 2.5 50 UB502040 2 4 6 8 70
UB502010 0.5 1 6 2.5 50 UB502040100S4 2 4 4 8 100
UB502010070 0.5 1 6 2.5 70 UB502040120S4 2 4 4 8 120
UB502010100 0.5 1 6 2.5 100 UB502040100 2 4 6 8 100
UB502012S 0.6 1.2 6 2 40 UB502040120 2 4 6 8 120
KORLOY
Y 173
Endmill
U-Star Endmill
UB5
B502 t50-&3"/$&
ØD Ød
DATA
Ø0.1 ~ Ø6 0 ~ -0.012mm
h5
HELIX ±0.01 ±0.005 Ø6.5 ~ Ø25 0 ~ -0.015mm
Corner R p.489

(mm)
UB502045 2.25 4.5 6 9 80 UB502100180 5 10 10 18 180

UB502050S 2.5 5 6 7.5 60 UB502100200 5 10 10 18 200
UB502050 2.5 5 6 10 80 UB502110 5.5 11 12 20 100
UB502050S5 2.5 5 5 10 80 UB502120S 6 12 12 18 60
UB502055 2.75 5.5 6 11 90 UB502120080 6 12 12 18 80
UB502060S 3 6 6 9 50 UB502120090 6 12 12 18 90
UB502060060 3 6 6 9 60 UB502120100 6 12 12 18 100
UB502060080 3 6 6 9 80 UB502120 6 12 12 24 110
UB502060 3 6 6 12 90 UB502120130 6 12 12 24 130
UB502060110 3 6 6 12 110 UB502120150 6 12 12 24 150
UB502060130 3 6 6 12 130 UB502120180 6 12 12 24 180
UB502060150 3 6 6 12 150 UB502120200 6 12 12 24 200
UB502065 3.25 6.5 8 13 90 UB502130 6.5 13 12 24 100
UB502070 3.5 7 8 14 90 UB502140S12 7 14 12 26 100
UB502080S 4 8 8 12 50 UB502140 7 14 14 26 100
UB502080060 4 8 8 12 60 UB502140S16 7 14 16 26 100
UB502080080 4 8 8 12 80 UB502150 7.5 15 16 28 140
UB502080090 4 8 8 12 90 UB502160100 8 16 16 24 100
UB502080 4 8 8 14 100 UB502160130 8 16 16 24 130
UB502080130 4 8 8 14 130 UB502160 8 16 16 30 150
UB502080150 4 8 8 14 150 UB502160180 8 16 16 30 180
UB502085 4.25 8.5 10 16 100 UB502160200 8 16 16 30 200
UB502090 4.5 9 10 18 100 UB502180S16 9 18 16 34 150
UB502100S 5 10 10 15 50 UB502180 9 18 18 34 150
UB502100060 5 10 10 15 60 UB502200100 10 20 20 30 100
UB502100080 5 10 10 15 80 UB502200130 10 20 20 30 130
UB502100090 5 10 10 15 90 UB502200 10 20 20 38 150
UB502100 5 10 10 18 100 UB502200200 10 20 20 38 200
UB502100130 5 10 10 18 130 UB502250120 12.5 25 25 50 120
UB502100150 5 10 10 18 150 UB502250180 12.5 25 25 50 180
○ ◎ ◎ ○ ○
174 KORLOY
UB5
B502…P 2 Flutes high precision ball endmill
t50-&3"/$&
ØD Ød
DATA
Ø0.1 ~ Ø6 0 ~ -0.012mm
h5
HELIX ±0.01 ±0.002 Ø6.5 ~ Ø25 0 ~ -0.015mm
Corner R p.489

(mm)
UB502001P 0.05 0.1 4 0.2 40

UB5020015P 0.075 0.15 4 0.3 40
UB502002P 0.1 0.2 4 0.4 40
UB502003P 0.15 0.3 4 0.6 40
UB502004P 0.2 0.4 4 0.8 40
UB502005P 0.25 0.5 4 1 40
UB502006P 0.3 0.6 4 1.2 40
UB502007P 0.35 0.7 4 1.4 40
UB502008P 0.4 0.8 4 1.6 40
UB502009P 0.45 0.9 4 1.8 40
UB502010P 0.5 1 6 2.5 50
UB502012P 0.6 1.2 6 3 50
UB502015P 0.75 1.5 6 4 50
UB502020P 1 2 6 5 50
UB502025P 1.25 2.5 6 6 60
UB502030P 1.5 3 6 6 60
UB502040P 2 4 6 8 70
UB502050P 2.5 5 6 10 80
UB502060P 3 6 6 12 90
UB502080P 4 8 8 14 100
UB502100P 5 10 10 18 100
UB502120P 6 12 12 24 110
○ ◎ ◎ ○ ○
KORLOY
Y 175
Endmill
U-Star Endmill
UB5
B512 2 Flutes long neck ball endmill
t50-&3"/$&
ØD Ød
DATA
Ø0.1 ~ Ø6 0 ~ -0.012mm
h5
HELIX ±0.01 ±0.005 Ø8 ~ Ø12 0 ~ -0.015mm
Corner R p.490~494
13°

1

2
(mm)
UB512001002 0.05 0.1 4 0.1 0.2 40 UB51200508 0.25 0.5 4 0.5 8 45

UB512001003 0.05 0.1 4 0.1 0.3 40 UB51200510 0.25 0.5 4 0.5 10 45
UB512001005 0.05 0.1 4 0.1 0.5 40 UB51200512 0.25 0.5 4 0.5 12 45
UB51200101 0.05 0.1 4 0.1 1 40 UB51200514 0.25 0.5 4 0.5 14 45
UB512002005 0.1 0.2 4 0.2 0.5 40 UB51200516 0.25 0.5 4 0.5 16 45
UB51200201 0.1 0.2 4 0.2 1 40 UB51200601 0.3 0.6 4 0.6 1 45
UB512002015 0.1 0.2 4 0.2 1.5 40 UB51200602 0.3 0.6 4 0.6 2 45
UB51200202 0.1 0.2 4 0.2 2 40 UB51200603 0.3 0.6 4 0.6 3 45
UB51200203 0.1 0.2 4 0.2 3 40 UB51200604 0.3 0.6 4 0.6 4 45
UB51200301 0.15 0.3 4 0.3 1 40 UB51200605 0.3 0.6 4 0.6 5 45
UB512003015 0.15 0.3 4 0.3 1.5 40 UB51200606 0.3 0.6 4 0.6 6 45
UB51200302 0.15 0.3 4 0.3 2 40 UB51200608 0.3 0.6 4 0.6 8 45
UB512003025 0.15 0.3 4 0.3 2.5 40 UB51200610 0.3 0.6 4 0.6 10 45
UB51200303 0.15 0.3 4 0.3 3 40 UB51200612 0.3 0.6 4 0.6 12 45
UB51200304 0.15 0.3 4 0.3 4 40 UB51200614 0.3 0.6 4 0.6 14 45
UB51200305 0.15 0.3 4 0.3 5 40 UB51200616 0.3 0.6 4 0.6 16 45
UB51200401 0.2 0.4 4 0.4 1 40 UB51200702 0.35 0.7 4 0.7 2 45
UB512004015 0.2 0.4 4 0.4 1.5 40 UB51200704 0.35 0.7 4 0.7 4 45
UB51200402 0.2 0.4 4 0.4 2 40 UB51200706 0.35 0.7 4 0.7 6 45
UB512004025 0.2 0.4 4 0.4 2.5 40 UB51200708 0.35 0.7 4 0.7 8 45
UB51200403 0.2 0.4 4 0.4 3 40 UB51200710 0.35 0.7 4 0.7 10 45
UB51200404 0.2 0.4 4 0.4 4 40 UB51200712 0.35 0.7 4 0.7 12 45
UB51200405 0.2 0.4 4 0.4 5 40 UB51200801 0.4 0.8 4 0.8 1 45
UB51200406 0.2 0.4 4 0.4 6 40 UB51200802 0.4 0.8 4 0.8 2 45
UB51200408 0.2 0.4 4 0.4 8 40 UB51200803 0.4 0.8 4 0.8 3 45
UB51200410 0.2 0.4 4 0.4 10 40 UB51200804 0.4 0.8 4 0.8 4 45
UB51200501 0.25 0.5 4 0.5 1 45 UB51200805 0.4 0.8 4 0.8 5 45
UB512005015 0.25 0.5 4 0.5 1.5 45 UB51200806 0.4 0.8 4 0.8 6 45
UB51200502 0.25 0.5 4 0.5 2 45 UB51200807 0.4 0.8 4 0.8 7 45
UB512005025 0.25 0.5 4 0.5 2.5 45 UB51200808 0.4 0.8 4 0.8 8 45
UB51200503 0.25 0.5 4 0.5 3 45 UB51200810 0.4 0.8 4 0.8 10 45
UB51200504 0.25 0.5 4 0.5 4 45 UB51200812 0.4 0.8 4 0.8 12 45
UB51200505 0.25 0.5 4 0.5 5 45 UB51200814 0.4 0.8 4 0.8 14 45
UB51200506 0.25 0.5 4 0.5 6 45 UB51200816 0.4 0.8 4 0.8 16 45
176 KORLOY
UB5
t50-&3"/$&
ØD Ød
DATA
Ø0.1 ~ Ø6 0 ~ -0.012mm
h5
HELIX ±0.01 ±0.005 Ø8 ~ Ø12 0 ~ -0.015mm
Corner R p.490~494
13°

1

2
(mm)
UB51200820 0.4 0.8 4 0.8 20 45 UB51201406 0.7 1.4 4 1.4 6 50

UB51200904 0.45 0.9 4 0.9 4 45 UB51201408 0.7 1.4 4 1.4 8 50
UB51200906 0.45 0.9 4 0.9 6 45 UB51201410 0.7 1.4 4 1.4 10 50
UB51200908 0.45 0.9 4 0.9 8 45 UB51201412 0.7 1.4 4 1.4 12 50
UB51200910 0.45 0.9 4 0.9 10 45 UB51201416 0.7 1.4 4 1.4 16 50
UB51201002 0.5 1 4 1 2 50 UB51201503 0.75 1.5 4 1.5 3 50
UB512010025 0.5 1 4 1 2.5 50 UB51201504 0.75 1.5 4 1.5 4 50
UB51201003 0.5 1 4 1 3 50 UB51201505 0.75 1.5 4 1.5 5 50
UB51201004 0.5 1 4 1 4 50 UB51201506 0.75 1.5 4 1.5 6 50
UB51201005 0.5 1 4 1 5 50 UB51201507 0.75 1.5 4 1.5 7 50
UB51201006 0.5 1 4 1 6 50 UB51201508 0.75 1.5 4 1.5 8 50
UB51201007 0.5 1 4 1 7 50 UB51201510 0.75 1.5 4 1.5 10 50
UB51201008 0.5 1 4 1 8 50 UB51201512 0.75 1.5 4 1.5 12 50
UB51201009 0.5 1 4 1 9 50 UB51201514 0.75 1.5 4 1.5 14 50
UB51201010 0.5 1 4 1 10 50 UB51201516 0.75 1.5 4 1.5 16 50
UB51201012 0.5 1 4 1 12 50 UB51201518 0.75 1.5 4 1.5 18 50
UB51201014 0.5 1 4 1 14 50 UB51201520 0.75 1.5 4 1.5 20 55
UB51201016 0.5 1 4 1 16 50 UB51201522 0.75 1.5 4 1.5 22 60
UB51201018 0.5 1 4 1 18 50 UB51201526 0.75 1.5 4 1.5 26 60
UB51201020 0.5 1 4 1 20 55 UB51201530 0.75 1.5 4 1.5 30 70
UB51201022 0.5 1 4 1 22 60 UB51201535 0.75 1.5 4 1.5 35 70
UB51201026 0.5 1 4 1 26 60 UB51201540 0.75 1.5 4 1.5 40 80
UB51201030 0.5 1 4 1 30 70 UB51201604 0.8 1.6 4 1.6 4 50
UB51201040 0.5 1 4 1 40 80 UB51201606 0.8 1.6 4 1.6 6 50
UB51201050 0.5 1 4 1 50 100 UB51201608 0.8 1.6 4 1.6 8 50
UB51201204 0.6 1.2 4 1.2 4 50 UB51201610 0.8 1.6 4 1.6 10 50
UB51201206 0.6 1.2 4 1.2 6 50 UB51201612 0.8 1.6 4 1.6 12 50
UB51201208 0.6 1.2 4 1.2 8 50 UB51201616 0.8 1.6 4 1.6 16 50
UB51201210 0.6 1.2 4 1.2 10 50 UB51201620 0.8 1.6 4 1.6 20 50
UB51201212 0.6 1.2 4 1.2 12 50 UB51201804 0.9 1.8 4 1.8 4 50
UB51201214 0.6 1.2 4 1.2 14 50 UB51201806 0.9 1.8 4 1.8 6 50
UB51201216 0.6 1.2 4 1.2 16 50 UB51201808 0.9 1.8 4 1.8 8 50
UB51201220 0.6 1.2 4 1.2 20 55 UB51201810 0.9 1.8 4 1.8 10 50
UB51201226 0.6 1.2 4 1.2 26 60 UB51201812 0.9 1.8 4 1.8 12 50
KORLOY
Y 177
Endmill
U-Star Endmill
UB5
t50-&3"/$&
ØD Ød
DATA
Ø0.1 ~ Ø6 0 ~ -0.012mm
h5
HELIX ±0.01 ±0.005 Ø8 ~ Ø12 0 ~ -0.015mm
Corner R p.490~494
13°

1

2
(mm)
UB51201816 0.9 1.8 4 1.8 16 50 UB51203010 1.5 3 6 3 10 50

UB51201820 0.9 1.8 4 1.8 20 50 UB51203012 1.5 3 6 3 12 50
UB51202004 1 2 4 2 4 50 UB51203014 1.5 3 6 3 14 60
UB51202005 1 2 4 2 5 50 UB51203016 1.5 3 6 3 16 60
UB51202006 1 2 4 2 6 50 UB51203018 1.5 3 6 3 18 60
UB51202008 1 2 4 2 8 50 UB51203020 1.5 3 6 3 20 60
UB51202010 1 2 4 2 10 50 UB51203022 1.5 3 6 3 22 65
UB51202012 1 2 4 2 12 50 UB51203026 1.5 3 6 3 26 65
UB51202014 1 2 4 2 14 50 UB51203030 1.5 3 6 3 30 70
UB51202016 1 2 4 2 16 50 UB51203035 1.5 3 6 3 35 70
UB51202018 1 2 4 2 18 55 UB51203040 1.5 3 6 3 40 80
UB51202020 1 2 4 2 20 55 UB51203045 1.5 3 6 3 45 90
UB51202022 1 2 4 2 22 60 UB51203050 1.5 3 6 3 50 100
UB51202026 1 2 4 2 26 60 UB51203060 1.5 3 6 3 60 100
UB51202030 1 2 4 2 30 70 UB51204008 2 4 6 4 8 50
UB51202035 1 2 4 2 35 70 UB51204010 2 4 6 4 10 50
UB51202040 1 2 4 2 40 80 UB51204012 2 4 6 4 12 50
UB51202045 1 2 4 2 45 90 UB51204014 2 4 6 4 14 60
UB51202050 1 2 4 2 50 100 UB51204016 2 4 6 4 16 60
UB51202060 1 2 4 2 60 110 UB51204018 2 4 6 4 18 60
UB51202508 1.25 2.5 4 2.5 8 50 UB51204020 2 4 6 4 20 60
UB51202510 1.25 2.5 4 2.5 10 50 UB51204022 2 4 6 4 22 65
UB51202512 1.25 2.5 4 2.5 12 50 UB51204026 2 4 6 4 26 65
UB51202516 1.25 2.5 4 2.5 16 50 UB51204030 2 4 6 4 30 70
UB51202520 1.25 2.5 4 2.5 20 50 UB51204035 2 4 6 4 35 70
UB51202522 1.25 2.5 4 2.5 22 60 UB51204040 2 4 6 4 40 80
UB51202526 1.25 2.5 4 2.5 26 60 UB51204045 2 4 6 4 45 90
UB51202530 1.25 2.5 4 2.5 30 70 UB51204050 2 4 6 4 50 100
UB51202535 1.25 2.5 4 2.5 35 70 UB51204055 2 4 6 4 55 100
UB51202540 1.25 2.5 4 2.5 40 80 UB51204060 2 4 6 4 60 100
UB51202545 1.25 2.5 4 2.5 45 90 UB51205015 2.5 5 6 6 15 60
UB51202550 1.25 2.5 4 2.5 50 100 UB51205020 2.5 5 6 6 20 60
UB51203006 1.5 3 6 3 6 50 UB51205026 2.5 5 6 6 26 65
UB51203008 1.5 3 6 3 8 50 UB51205030 2.5 5 6 6 30 70
178 KORLOY
UB5
t50-&3"/$&
ØD Ød
DATA
Ø0.1 ~ Ø6 0 ~ -0.012mm
h5
HELIX ±0.01 ±0.005 Ø8 ~ Ø12 0 ~ -0.015mm
Corner R p.490~494
13°

1

2
(mm)
UB51205035 2.5 5 6 6 35 70 UB51208025100 4 8 8 14 25 100

UB51205040 2.5 5 6 6 40 80 UB51208035 4 8 8 10 35 70
UB51205045 2.5 5 6 6 45 90 UB51208035100 4 8 8 14 35 100
UB51205050 2.5 5 6 6 50 100 UB51210030 5 10 10 12 30 75
UB51205055 2.5 5 6 6 55 100 UB51210030100 5 10 10 18 30 100
UB51205060 2.5 5 6 6 60 100 UB51210040 5 10 10 12 40 75
UB51206020 3 6 6 8 20 60 UB51210040100 5 10 10 18 40 100
UB5120602090 3 6 6 12 20 90 UB51212032 6 12 12 14 32 80
UB51206030 3 6 6 8 30 60 UB51212032110 6 12 12 22 32 110
UB5120603090 3 6 6 12 30 90 UB51212045 6 12 12 14 45 80
UB51208025 4 8 8 10 25 70 UB51212045110 6 12 12 22 45 110
○ ◎ ◎ ○ ○
KORLOY
Y 179
Endmill
U-Star Endmill
UB5
B512S6 2 Flutes long neck ball end mill (shank 6)
t50-&3"/$&
ØD Ød
CARBIDE 30 R AlCrN
DATA
Ø0.5 ~ Ø2 0 ~ -0.012mm h5
HELIX ±0.005
Corner R p.490~494
13°

1

2
(mm)
UB51200501S6 0.25 0.5 6 0.5 1 45 UB51201016S6 0.5 1 6 1 16 50

UB51200502S6 0.25 0.5 6 0.5 2 45 UB51201018S6 0.5 1 6 1 18 50
UB51200504S6 0.25 0.5 6 0.5 4 45 UB51201020S6 0.5 1 6 1 20 55
UB51200601S6 0.3 0.6 6 0.6 1 45 UB51201022S6 0.5 1 6 1 22 60
UB51200602S6 0.3 0.6 6 0.6 2 45 UB51201026S6 0.5 1 6 1 26 60
UB51200603S6 0.3 0.6 6 0.6 3 45 UB51201030S6 0.5 1 6 1 30 70
UB51200604S6 0.3 0.6 6 0.6 4 45 UB51201503S6 0.75 1.5 6 1.5 3 50
UB51200605S6 0.3 0.6 6 0.6 5 45 UB51201504S6 0.75 1.5 6 1.5 4 50
UB51200606S6 0.3 0.6 6 0.6 6 45 UB51201506S6 0.75 1.5 6 1.5 6 50
UB51200608S6 0.3 0.6 6 0.6 8 45 UB51201508S6 0.75 1.5 6 1.5 8 50
UB51200610S6 0.3 0.6 6 0.6 10 45 UB51201510S6 0.75 1.5 6 1.5 10 50
UB51200612S6 0.3 0.6 6 0.6 12 45 UB51201512S6 0.75 1.5 6 1.5 12 50
UB51200614S6 0.3 0.6 6 0.6 14 45 UB51201514S6 0.75 1.5 6 1.5 14 50
UB51200616S6 0.3 0.6 6 0.6 16 45 UB51201516S6 0.75 1.5 6 1.5 16 50
UB51200801S6 0.4 0.8 6 0.8 1 45 UB51201518S6 0.75 1.5 6 1.5 18 50
UB51200802S6 0.4 0.8 6 0.8 2 45 UB51201520S6 0.75 1.5 6 1.5 20 55
UB51200803S6 0.4 0.8 6 0.8 3 45 UB51201522S6 0.75 1.5 6 1.5 22 60
UB51200804S6 0.4 0.8 6 0.8 4 45 UB51201526S6 0.75 1.5 6 1.5 26 60
UB51200805S6 0.4 0.8 6 0.8 5 45 UB51201530S6 0.75 1.5 6 1.5 30 70
UB51200806S6 0.4 0.8 6 0.8 6 45 UB51201535S6 0.75 1.5 6 1.5 35 70
UB51200808S6 0.4 0.8 6 0.8 8 45 UB51201540S6 0.75 1.5 6 1.5 40 80
UB51200810S6 0.4 0.8 6 0.8 10 45 UB51202004S6 1 2 6 2 4 50
UB51200812S6 0.4 0.8 6 0.8 12 45 UB51202006S6 1 2 6 2 6 50
UB51200814S6 0.4 0.8 6 0.8 14 45 UB51202008S6 1 2 6 2 8 50
UB51200816S6 0.4 0.8 6 0.8 16 45 UB51202010S6 1 2 6 2 10 50
UB51200820S6 0.4 0.8 6 0.8 20 55 UB51202012S6 1 2 6 2 12 50
UB51201002S6 0.5 1 6 1 2 50 UB51202014S6 1 2 6 2 14 50
UB51201003S6 0.5 1 6 1 3 50 UB51202016S6 1 2 6 2 16 50
UB51201004S6 0.5 1 6 1 4 50 UB51202018S6 1 2 6 2 18 50
UB51201005S6 0.5 1 6 1 5 50 UB51202020S6 1 2 6 2 20 50
UB51201006S6 0.5 1 6 1 6 50 UB51202022S6 1 2 6 2 22 60
UB51201007S6 0.5 1 6 1 7 50 UB51202026S6 1 2 6 2 26 60
UB51201008S6 0.5 1 6 1 8 50 UB51202030S6 1 2 6 2 30 70
UB51201009S6 0.5 1 6 1 9 50 UB51202035S6 1 2 6 2 35 70
UB51201010S6 0.5 1 6 1 10 50 UB51202040S6 1 2 6 2 40 80
UB51201012S6 0.5 1 6 1 12 50 UB51202045S6 1 2 6 2 45 90
UB51201014S6 0.5 1 6 1 14 50 UB51202050S6 1 2 6 2 50 100
○ ◎ ◎ ○ ○
180 KORLOY
UB5
B512S6 2 Flutes long neck ball end mill (shank 6)
t50-&3"/$&
ØD Ød
CARBIDE 30 R AlCrN
DATA
Ø0.5 ~ Ø2 0 ~ -0.012mm h5
HELIX ±0.005
Corner R p.490~494
13°

1

2
(mm)
Designation R ØD Ød ℓ1 ℓ2 ѡ L
UB532030 1.5 3 6 2.3 16 1.5 80

UB532040 2 4 6 3.1 20 1.5 80
UB532050 2.5 5 6 3.9 25 1.5 80
UB532060 3 6 6 4.9 30 1.5 100
UB532080 4 8 8 6.3 35 1.5 100
UB532100 5 10 10 7.9 40 1.5 100
UB532120 6 12 12 9.5 50 1.5 100
○ ◎ ◎ ○ ○
KORLOY
Y 181
Endmill
U-Star Endmill
UB5
B542 2 Flutes tapered neck ball endmill
t50-&3"/$&
ØD Ød
DATA
Ø0.1 ~ Ø6 0 ~ -0.012mm
h5
HELIX ±0.005 ±0.01 Ø8 ~ Ø12 0 ~ -0.015mm
R3 OR UNDER ABOVE R3 p.495
θ 13°

1
2
(mm)
Designation R ØD Ød ℓ1 ℓ2 ℓ3 ѡ L R ØD Ød ℓ1 ℓ2 ℓ3 ѡ L
UB54200105005 0.05 0.1 4 0.1 - 0.5 0.5 40 UB5420031503 0.15 0.3 4 0.3 0.6 3 1.5 40
UB5420010501 0.05 0.1 4 0.1 - 1 0.5 40 UB5420031504 0.15 0.3 4 0.3 0.6 4 1.5 40
UB54200110005 0.05 0.1 4 0.1 - 0.5 1 40 UB5420031505 0.15 0.3 4 0.3 0.6 5 1.5 40
UB5420011001 0.05 0.1 4 0.1 - 1 1 40 UB5420032002 0.15 0.3 4 0.3 0.6 2 2 40
UB54200115005 0.05 0.1 4 0.1 - 0.5 1.5 40 UB5420032003 0.15 0.3 4 0.3 0.6 3 2 40
UB5420011501 0.05 0.1 4 0.1 - 1 1.5 40 UB5420032004 0.15 0.3 4 0.3 0.6 4 2 40
UB54200120005 0.05 0.1 4 0.1 - 0.5 2 40 UB5420032005 0.15 0.3 4 0.3 0.6 5 2 40
UB5420012001 0.05 0.1 4 0.1 - 1 2 40 UB5420033002 0.15 0.3 4 0.3 0.6 2 3 40
UB54200130005 0.05 0.1 4 0.1 - 0.5 3 40 UB5420033003 0.15 0.3 4 0.3 0.6 3 3 40
UB5420013001 0.05 0.1 4 0.1 - 1 3 40 UB5420033004 0.15 0.3 4 0.3 0.6 4 3 40
UB5420020501 0.1 0.2 4 0.2 0.4 1 0.5 40 UB5420033005 0.15 0.3 4 0.3 0.6 5 3 40
UB5420020502 0.1 0.2 4 0.2 0.4 2 0.5 40 UB5420035005 0.15 0.3 4 0.3 0.6 5 5 40
UB5420020503 0.1 0.2 4 0.2 0.4 3 0.5 40 UB5420040502 0.2 0.4 4 0.4 0.8 2 0.5 50
UB5420021001 0.1 0.2 4 0.2 0.4 1 1 40 UB5420040503 0.2 0.4 4 0.4 0.8 3 0.5 50
UB5420021002 0.1 0.2 4 0.2 0.4 2 1 40 UB5420040504 0.2 0.4 4 0.4 0.8 4 0.5 50
UB5420021003 0.1 0.2 4 0.2 0.4 3 1 40 UB5420040505 0.2 0.4 4 0.4 0.8 5 0.5 50
UB5420021501 0.1 0.2 4 0.2 0.4 1 1.5 40 UB5420040506 0.2 0.4 4 0.4 0.8 6 0.5 50
UB5420021502 0.1 0.2 4 0.2 0.4 2 1.5 40 UB5420041002 0.2 0.4 4 0.4 0.8 2 1 50
UB5420021503 0.1 0.2 4 0.2 0.4 3 1.5 40 UB5420041003 0.2 0.4 4 0.4 0.8 3 1 50
UB5420022001 0.1 0.2 4 0.2 0.4 1 2 40 UB5420041004 0.2 0.4 4 0.4 0.8 4 1 50
UB5420022002 0.1 0.2 4 0.2 0.4 2 2 40 UB5420041005 0.2 0.4 4 0.4 0.8 5 1 50
UB5420022003 0.1 0.2 4 0.2 0.4 3 2 40 UB5420041006 0.2 0.4 4 0.4 0.8 6 1 50
UB5420023001 0.1 0.2 4 0.2 0.4 1 3 40 UB5420041502 0.2 0.4 4 0.4 0.8 2 1.5 50
UB5420023002 0.1 0.2 4 0.2 0.4 2 3 40 UB5420041503 0.2 0.4 4 0.4 0.8 3 1.5 50
UB5420023003 0.1 0.2 4 0.2 0.4 3 3 40 UB5420041504 0.2 0.4 4 0.4 0.8 4 1.5 50
UB5420025002 0.1 0.2 4 0.2 0.4 2 5 40 UB5420041505 0.2 0.4 4 0.4 0.8 5 1.5 50
UB5420025003 0.1 0.2 4 0.2 0.4 3 5 40 UB5420041506 0.2 0.4 4 0.4 0.8 6 1.5 50
UB5420030502 0.15 0.3 4 0.3 0.6 2 0.5 40 UB5420042002 0.2 0.4 4 0.4 0.8 2 2 50
UB5420030503 0.15 0.3 4 0.3 0.6 3 0.5 40 UB5420042003 0.2 0.4 4 0.4 0.8 3 2 50
UB5420030504 0.15 0.3 4 0.3 0.6 4 0.5 40 UB5420042004 0.2 0.4 4 0.4 0.8 4 2 50
UB5420030505 0.15 0.3 4 0.3 0.6 5 0.5 40 UB5420042005 0.2 0.4 4 0.4 0.8 5 2 50
UB5420031002 0.15 0.3 4 0.3 0.6 2 1 40 UB5420042006 0.2 0.4 4 0.4 0.8 6 2 50
UB5420031003 0.15 0.3 4 0.3 0.6 3 1 40 UB5420043002 0.2 0.4 4 0.4 0.8 2 3 50
UB5420031004 0.15 0.3 4 0.3 0.6 4 1 40 UB5420043003 0.2 0.4 4 0.4 0.8 3 3 50
UB5420031005 0.15 0.3 4 0.3 0.6 5 1 40 UB5420043004 0.2 0.4 4 0.4 0.8 4 3 50
UB5420031502 0.15 0.3 4 0.3 0.6 2 1.5 40 UB5420043005 0.2 0.4 4 0.4 0.8 5 3 50
182 KORLOY
UB5
t50-&3"/$&
ØD Ød
DATA
Ø0.1 ~ Ø6 0 ~ -0.012mm
h5
HELIX ±0.005 ±0.01 Ø8 ~ Ø12 0 ~ -0.015mm
θ 13°

1
2
(mm)
UB5420043006 0.2 0.4 4 0.4 0.8 6 3 50 UB5420061510 0.3 0.6 4 0.6 1.2 10 1.5 50
UB5420045004 0.2 0.4 4 0.4 0.8 4 5 50 UB5420061512 0.3 0.6 4 0.6 1.2 12 1.5 50
UB5420045006 0.2 0.4 4 0.4 0.8 6 5 50 UB5420062004 0.3 0.6 4 0.6 1.2 4 2 50
UB5420050504 0.25 0.5 4 0.5 1 4 0.5 50 UB5420062006 0.3 0.6 4 0.6 1.2 6 2 50
UB5420050506 0.25 0.5 4 0.5 1 6 0.5 50 UB5420062008 0.3 0.6 4 0.6 1.2 8 2 50
UB5420050508 0.25 0.5 4 0.5 1 8 0.5 50 UB5420062010 0.3 0.6 4 0.6 1.2 10 2 50
UB5420050510 0.25 0.5 4 0.5 1 10 0.5 50 UB5420062012 0.3 0.6 4 0.6 1.2 12 2 50
UB5420051004 0.25 0.5 4 0.5 1 4 1 50 UB5420063004 0.3 0.6 4 0.6 1.2 4 3 50
UB5420051006 0.25 0.5 4 0.5 1 6 1 50 UB5420063006 0.3 0.6 4 0.6 1.2 6 3 50
UB5420051008 0.25 0.5 4 0.5 1 8 1 50 UB5420063008 0.3 0.6 4 0.6 1.2 8 3 50
UB5420051010 0.25 0.5 4 0.5 1 10 1 50 UB5420063010 0.3 0.6 4 0.6 1.2 10 3 50
UB5420051504 0.25 0.5 4 0.5 1 4 1.5 50 UB5420063012 0.3 0.6 4 0.6 1.2 12 3 50
UB5420051506 0.25 0.5 4 0.5 1 6 1.5 50 UB5420080504 0.4 0.8 4 0.8 1.6 4 0.5 50
UB5420051508 0.25 0.5 4 0.5 1 8 1.5 50 UB5420080506 0.4 0.8 4 0.8 1.6 6 0.5 50
UB5420051510 0.25 0.5 4 0.5 1 10 1.5 50 UB5420080508 0.4 0.8 4 0.8 1.6 8 0.5 50
UB5420052004 0.25 0.5 4 0.5 1 4 2 50 UB5420080510 0.4 0.8 4 0.8 1.6 10 0.5 50
UB5420052006 0.25 0.5 4 0.5 1 6 2 50 UB5420080512 0.4 0.8 4 0.8 1.6 12 0.5 50
UB5420052008 0.25 0.5 4 0.5 1 8 2 50 UB5420080516 0.4 0.8 4 0.8 1.6 16 0.5 50
UB5420052010 0.25 0.5 4 0.5 1 10 2 50 UB5420081004 0.4 0.8 4 0.8 1.6 4 1 50
UB5420053004 0.25 0.5 4 0.5 1 4 3 50 UB5420081006 0.4 0.8 4 0.8 1.6 6 1 50
UB5420053006 0.25 0.5 4 0.5 1 6 3 50 UB5420081008 0.4 0.8 4 0.8 1.6 8 1 50
UB5420053008 0.25 0.5 4 0.5 1 8 3 50 UB5420081010 0.4 0.8 4 0.8 1.6 10 1 50
UB5420053010 0.25 0.5 4 0.5 1 10 3 50 UB5420081012 0.4 0.8 4 0.8 1.6 12 1 50
UB5420060504 0.3 0.6 4 0.6 1.2 4 0.5 50 UB5420081016 0.4 0.8 4 0.8 1.6 16 1 50
UB5420060506 0.3 0.6 4 0.6 1.2 6 0.5 50 UB5420081504 0.4 0.8 4 0.8 1.6 4 1.5 50
UB5420060508 0.3 0.6 4 0.6 1.2 8 0.5 50 UB5420081506 0.4 0.8 4 0.8 1.6 6 1.5 50
UB5420060510 0.3 0.6 4 0.6 1.2 10 0.5 50 UB5420081508 0.4 0.8 4 0.8 1.6 8 1.5 50
UB5420060512 0.3 0.6 4 0.6 1.2 12 0.5 50 UB5420081510 0.4 0.8 4 0.8 1.6 10 1.5 50
UB5420061004 0.3 0.6 4 0.6 1.2 4 1 50 UB5420081512 0.4 0.8 4 0.8 1.6 12 1.5 50
UB5420061006 0.3 0.6 4 0.6 1.2 6 1 50 UB5420081516 0.4 0.8 4 0.8 1.6 16 1.5 50
UB5420061008 0.3 0.6 4 0.6 1.2 8 1 50 UB5420082004 0.4 0.8 4 0.8 1.6 4 2 50
UB5420061010 0.3 0.6 4 0.6 1.2 10 1 50 UB5420082006 0.4 0.8 4 0.8 1.6 6 2 50
UB5420061012 0.3 0.6 4 0.6 1.2 12 1 50 UB5420082008 0.4 0.8 4 0.8 1.6 8 2 50
UB5420061504 0.3 0.6 4 0.6 1.2 4 1.5 50 UB5420082010 0.4 0.8 4 0.8 1.6 10 2 50
UB5420061506 0.3 0.6 4 0.6 1.2 6 1.5 50 UB5420082012 0.4 0.8 4 0.8 1.6 12 2 50
UB5420061508 0.3 0.6 4 0.6 1.2 8 1.5 50 UB5420082016 0.4 0.8 4 0.8 1.6 16 2 50
KORLOY
Y 183
Endmill
U-Star Endmill
UB5
t50-&3"/$&
ØD Ød
DATA
Ø0.1 ~ Ø6 0 ~ -0.012mm
h5
HELIX ±0.005 ±0.01 Ø8 ~ Ø12 0 ~ -0.015mm
θ 13°

1
2
(mm)
UB5420083004 0.4 0.8 4 0.8 1.6 4 3 50 UB5420102006 0.5 1 4 1 2.5 6 2 50

UB5420083006 0.4 0.8 4 0.8 1.6 6 3 50 UB5420102008 0.5 1 4 1 2.5 8 2 50
UB5420083008 0.4 0.8 4 0.8 1.6 8 3 50 UB5420102010 0.5 1 4 1 2.5 10 2 50
UB5420083010 0.4 0.8 4 0.8 1.6 10 3 50 UB5420102012 0.5 1 4 1 2.5 12 2 50
UB5420083012 0.4 0.8 4 0.8 1.6 12 3 50 UB5420102016 0.5 1 4 1 2.5 16 2 50
UB5420083016 0.4 0.8 4 0.8 1.6 16 3 50 UB5420102020 0.5 1 4 1 2.5 20 2 50
UB5420100506 0.5 1 4 1 2.5 6 0.5 50 UB5420102025 0.5 1 4 1 2.5 25 2 60
UB5420100508 0.5 1 4 1 2.5 8 0.5 50 UB5420102030 0.5 1 4 1 2.5 30 2 70
UB5420100510 0.5 1 4 1 2.5 10 0.5 50 UB5420102040 0.5 1 4 1 2.5 40 2 80
UB5420100512 0.5 1 4 1 2.5 12 0.5 50 UB5420102050 0.5 1 6 1 2.5 50 2 90
UB5420100516 0.5 1 4 1 2.5 16 0.5 50 UB5420103006 0.5 1 4 1 2.5 6 3 50
UB5420100520 0.5 1 4 1 2.5 20 0.5 50 UB5420103008 0.5 1 4 1 2.5 8 3 50
UB5420100525 0.5 1 4 1 2.5 25 0.5 60 UB5420103010 0.5 1 4 1 2.5 10 3 50
UB5420100530 0.5 1 4 1 2.5 30 0.5 70 UB5420103012 0.5 1 4 1 2.5 12 3 50
UB5420100540 0.5 1 4 1 2.5 40 0.5 80 UB5420103016 0.5 1 4 1 2.5 16 3 50
UB5420100550 0.5 1 4 1 2.5 50 0.5 90 UB5420103020 0.5 1 4 1 2.5 20 3 50
UB5420101006 0.5 1 4 1 2.5 6 1 50 UB5420103025 0.5 1 4 1 2.5 25 3 60
UB5420101008 0.5 1 4 1 2.5 8 1 50 UB5420103030 0.5 1 6 1 2.5 30 3 70
UB5420101010 0.5 1 4 1 2.5 10 1 50 UB5420103040 0.5 1 6 1 2.5 40 3 80
UB5420101012 0.5 1 4 1 2.5 12 1 50 UB5420103050 0.5 1 6 1 2.5 50 3 90
UB5420101016 0.5 1 4 1 2.5 16 1 50 UB5420105030 0.5 1 6 1 2.5 30 5 70
UB5420101020 0.5 1 4 1 2.5 20 1 50 UB5420120508 0.6 1.2 4 1.2 3 8 0.5 50
UB5420101025 0.5 1 4 1 2.5 25 1 60 UB5420120512 0.6 1.2 4 1.2 3 12 0.5 50
UB5420101030 0.5 1 4 1 2.5 30 1 70 UB5420120516 0.6 1.2 4 1.2 3 16 0.5 50
UB5420101040 0.5 1 4 1 2.5 40 1 80 UB5420120520 0.6 1.2 4 1.2 3 20 0.5 50
UB5420101050 0.5 1 4 1 2.5 50 1 90 UB5420120525 0.6 1.2 4 1.2 3 25 0.5 60
UB5420101506 0.5 1 4 1 2.5 6 1.5 50 UB5420120530 0.6 1.2 4 1.2 3 30 0.5 70
UB5420101508 0.5 1 4 1 2.5 8 1.5 50 UB5420121008 0.6 1.2 4 1.2 3 8 1 50
UB5420101510 0.5 1 4 1 2.5 10 1.5 50 UB5420121012 0.6 1.2 4 1.2 3 12 1 50
UB5420101512 0.5 1 4 1 2.5 12 1.5 50 UB5420121016 0.6 1.2 4 1.2 3 16 1 50
UB5420101516 0.5 1 4 1 2.5 16 1.5 50 UB5420121020 0.6 1.2 4 1.2 3 20 1 50
UB5420101520 0.5 1 4 1 2.5 20 1.5 50 UB5420121025 0.6 1.2 4 1.2 3 25 1 60
UB5420101525 0.5 1 4 1 2.5 25 1.5 60 UB5420121030 0.6 1.2 4 1.2 3 30 1 70
UB5420101530 0.5 1 4 1 2.5 30 1.5 70 UB5420121508 0.6 1.2 4 1.2 3 8 1.5 50
UB5420101540 0.5 1 4 1 2.5 40 1.5 80 UB5420121512 0.6 1.2 4 1.2 3 12 1.5 50
UB5420101550 0.5 1 4 1 2.5 50 1.5 90 UB5420121516 0.6 1.2 4 1.2 3 16 1.5 50
184 KORLOY
UB5
t50-&3"/$&
ØD Ød
DATA
Ø0.1 ~ Ø6 0 ~ -0.012mm
h5
HELIX ±0.005 ±0.01 Ø8 ~ Ø12 0 ~ -0.015mm
θ 13°

1
2
(mm)
UB5420121520 0.6 1.2 4 1.2 3 20 1.5 50 UB5420151516 0.75 1.5 4 1.5 4 16 1.5 50
UB5420121525 0.6 1.2 4 1.2 3 25 1.5 60 UB5420151520 0.75 1.5 4 1.5 4 20 1.5 50
UB5420121530 0.6 1.2 4 1.2 3 30 1.5 70 UB5420151525 0.75 1.5 4 1.5 4 25 1.5 60
UB5420122008 0.6 1.2 4 1.2 3 8 2 50 UB5420151530 0.75 1.5 4 1.5 4 30 1.5 70
UB5420122012 0.6 1.2 4 1.2 3 12 2 50 UB5420151540 0.75 1.5 4 1.5 4 40 1.5 80
UB5420122016 0.6 1.2 4 1.2 3 16 2 50 UB5420151550 0.75 1.5 4 1.5 4 50 1.5 90
UB5420122020 0.6 1.2 4 1.2 3 20 2 50 UB5420121016 0.6 1.2 4 1.2 3 16 1 50
UB5420122025 0.6 1.2 4 1.2 3 25 2 60 UB5420121020 0.6 1.2 4 1.2 3 20 1 50
UB5420122030 0.6 1.2 4 1.2 3 30 2 70 UB5420121025 0.6 1.2 4 1.2 3 25 1 60
UB5420123008 0.6 1.2 4 1.2 3 8 3 50 UB5420121030 0.6 1.2 4 1.2 3 30 1 70
UB5420123012 0.6 1.2 4 1.2 3 12 3 50 UB5420121508 0.6 1.2 4 1.2 3 8 1.5 50
UB5420123016 0.6 1.2 4 1.2 3 16 3 50 UB5420121512 0.6 1.2 4 1.2 3 12 1.5 50
UB5420123020 0.6 1.2 4 1.2 3 20 3 50 UB5420121516 0.6 1.2 4 1.2 3 16 1.5 50
UB5420123025 0.6 1.2 4 1.2 3 25 3 60 UB5420121520 0.6 1.2 4 1.2 3 20 1.5 50
UB5420123030 0.6 1.2 6 1.2 3 30 5 70 UB5420121525 0.6 1.2 4 1.2 3 25 1.5 60
UB5420150508 0.75 1.5 4 1.5 4 8 0.5 50 UB5420121530 0.6 1.2 4 1.2 3 30 1.5 70
UB5420150510 0.75 1.5 4 1.5 4 10 0.5 50 UB5420122008 0.6 1.2 4 1.2 3 8 2 50
UB5420150512 0.75 1.5 4 1.5 4 12 0.5 50 UB5420122012 0.6 1.2 4 1.2 3 12 2 50
UB5420150516 0.75 1.5 4 1.5 4 16 0.5 50 UB5420122016 0.6 1.2 4 1.2 3 16 2 50
UB5420150520 0.75 1.5 4 1.5 4 20 0.5 50 UB5420122020 0.6 1.2 4 1.2 3 20 2 50
UB5420150525 0.75 1.5 4 1.5 4 25 0.5 60 UB5420122025 0.6 1.2 4 1.2 3 25 2 60
UB5420150530 0.75 1.5 4 1.5 4 30 0.5 70 UB5420122030 0.6 1.2 4 1.2 3 30 2 70
UB5420150540 0.75 1.5 4 1.5 4 40 0.5 80 UB5420123008 0.6 1.2 4 1.2 3 8 3 50
UB5420150550 0.75 1.5 4 1.5 4 50 0.5 90 UB5420123012 0.6 1.2 4 1.2 3 12 3 50
UB5420151008 0.75 1.5 4 1.5 4 8 1 50 UB5420123016 0.6 1.2 4 1.2 3 16 3 50
UB5420151010 0.75 1.5 4 1.5 4 10 1 50 UB5420123020 0.6 1.2 4 1.2 3 20 3 50
UB5420151012 0.75 1.5 4 1.5 4 12 1 50 UB5420123025 0.6 1.2 4 1.2 3 25 3 60
UB5420151016 0.75 1.5 4 1.5 4 16 1 50 UB5420123030 0.6 1.2 6 1.2 3 30 5 70
UB5420151020 0.75 1.5 4 1.5 4 20 1 50 UB5420150508 0.75 1.5 4 1.5 4 8 0.5 50
UB5420151025 0.75 1.5 4 1.5 4 25 1 60 UB5420150510 0.75 1.5 4 1.5 4 10 0.5 50
UB5420151030 0.75 1.5 4 1.5 4 30 1 70 UB5420150512 0.75 1.5 4 1.5 4 12 0.5 50
UB5420151040 0.75 1.5 4 1.5 4 40 1 80 UB5420150516 0.75 1.5 4 1.5 4 16 0.5 50
UB5420151050 0.75 1.5 4 1.5 4 50 1 90 UB5420150520 0.75 1.5 4 1.5 4 20 0.5 50
UB5420151508 0.75 1.5 4 1.5 4 8 1.5 50 UB5420150525 0.75 1.5 4 1.5 4 25 0.5 60
UB5420151510 0.75 1.5 4 1.5 4 10 1.5 50 UB5420150530 0.75 1.5 4 1.5 4 30 0.5 70
UB5420151512 0.75 1.5 4 1.5 4 12 1.5 50 UB5420150540 0.75 1.5 4 1.5 4 40 0.5 80
KORLOY
Y 185
Endmill
U-Star Endmill
UB5
t50-&3"/$&
ØD Ød
DATA
Ø0.1 ~ Ø6 0 ~ -0.012mm
h5
HELIX ±0.005 ±0.01 Ø8 ~ Ø12 0 ~ -0.015mm
θ 13°

1
2
(mm)
UB5420150550 0.75 1.5 4 1.5 4 50 0.5 90 UB5420200520 1 2 4 2 5 20 0.5 50

UB5420151008 0.75 1.5 4 1.5 4 8 1 50 UB5420200525 1 2 4 2 5 25 0.5 60
UB5420151010 0.75 1.5 4 1.5 4 10 1 50 UB5420200530 1 2 4 2 5 30 0.5 70
UB5420151012 0.75 1.5 4 1.5 4 12 1 50 UB5420200540 1 2 4 2 5 40 0.5 80
UB5420151016 0.75 1.5 4 1.5 4 16 1 50 UB5420200550 1 2 6 2 5 50 0.5 100
UB5420151020 0.75 1.5 4 1.5 4 20 1 50 UB5420200560 1 2 6 2 5 60 0.5 100
UB5420151025 0.75 1.5 4 1.5 4 25 1 60 UB5420200580 1 2 6 2 5 80 0.5 140
UB5420151030 0.75 1.5 4 1.5 4 30 1 70 UB5420201010 1 2 4 2 5 10 1 50
UB5420151040 0.75 1.5 4 1.5 4 40 1 80 UB5420201012 1 2 4 2 5 12 1 50
UB5420151050 0.75 1.5 4 1.5 4 50 1 90 UB5420201016 1 2 4 2 5 16 1 50
UB5420151508 0.75 1.5 4 1.5 4 8 1.5 50 UB5420201020 1 2 4 2 5 20 1 50
UB5420151510 0.75 1.5 4 1.5 4 10 1.5 50 UB5420201025 1 2 4 2 5 25 1 60
UB5420151512 0.75 1.5 4 1.5 4 12 1.5 50 UB5420201030 1 2 4 2 5 30 1 70
UB5420151516 0.75 1.5 4 1.5 4 16 1.5 50 UB5420201040 1 2 6 2 5 40 1 80
UB5420151520 0.75 1.5 4 1.5 4 20 1.5 50 UB5420201050 1 2 6 2 5 50 1 100
UB5420151525 0.75 1.5 4 1.5 4 25 1.5 60 UB5420201060 1 2 6 2 5 60 1 100
UB5420151530 0.75 1.5 4 1.5 4 30 1.5 70 UB5420201080 1 2 6 2 5 80 1 140
UB5420151540 0.75 1.5 4 1.5 4 40 1.5 80 UB5420201510 1 2 4 2 5 10 1.5 50
UB5420151550 0.75 1.5 4 1.5 4 50 1.5 90 UB5420201512 1 2 4 2 5 12 1.5 50
UB5420152008 0.75 1.5 4 1.5 4 8 2 50 UB5420201516 1 2 4 2 5 16 1.5 50
UB5420152010 0.75 1.5 4 1.5 4 10 2 50 UB5420201520 1 2 4 2 5 20 1.5 50
UB5420152012 0.75 1.5 4 1.5 4 12 2 50 UB5420201525 1 2 4 2 5 25 1.5 60
UB5420152016 0.75 1.5 4 1.5 4 16 2 50 UB5420201530 1 2 6 2 5 30 1.5 70
UB5420152020 0.75 1.5 4 1.5 4 20 2 50 UB5420201540 1 2 6 2 5 40 1.5 80
UB5420152025 0.75 1.5 4 1.5 4 25 2 60 UB5420201550 1 2 6 2 5 50 1.5 100
UB5420152030 0.75 1.5 4 1.5 4 30 2 70 UB5420201560 1 2 6 2 5 60 1.5 100
UB5420152040 0.75 1.5 6 1.5 4 40 2 80 UB5420201580 1 2 6 2 5 80 1.5 140
UB5420152050 0.75 1.5 6 1.5 4 50 2 90 UB5420202010 1 2 4 2 5 10 2 50
UB5420153020 0.75 1.5 6 1.5 4 20 3 50 UB5420202012 1 2 4 2 5 12 2 50
UB5420153030 0.75 1.5 6 1.5 4 30 3 70 UB5420202016 1 2 4 2 5 16 2 50
UB5420153040 0.75 1.5 6 1.5 4 40 3 80 UB5420202020 1 2 4 2 5 20 2 55
UB5420153050 0.75 1.5 8 1.5 4 50 3 90 UB5420202025 1 2 4 2 5 25 2 60
UB5420155030 0.75 1.5 8 1.5 4 30 5 70 UB5420202030 1 2 4 2 5 30 2 70
UB5420200510 1 2 4 2 5 10 0.5 50 UB5420202040 1 2 6 2 5 40 2 80
UB5420200512 1 2 4 2 5 12 0.5 50 UB5420202050 1 2 6 2 5 50 2 90
UB5420200516 1 2 4 2 5 16 0.5 50 UB5420202060 1 2 6 2 5 60 2 100
186 KORLOY
UB5
t50-&3"/$&
ØD Ød
DATA
Ø0.1 ~ Ø6 0 ~ -0.012mm
h5
HELIX ±0.005 ±0.01 Ø8 ~ Ø12 0 ~ -0.015mm
θ 13°

1
2
(mm)
UB5420202080 1 2 8 2 5 80 2 140 UB5420400540 2 4 6 6 8 40 0.5 90

UB5420203030 1 2 6 2 5 30 3 70 UB5420400550 2 4 6 6 8 50 0.5 100
UB5420203040 1 2 6 2 5 40 3 80 UB5420400560 2 4 6 6 8 60 0.5 110
UB5420203050 1 2 8 2 5 50 3 90 UB5420400570 2 4 6 6 8 70 0.5 120
UB5420203060 1 2 8 2 5 60 3 100 UB5420401040 2 4 6 6 8 40 1 90
UB5420203080 1 2 10 2 5 80 3 140 UB5420401050 2 4 6 6 8 50 1 100
UB5420205030 1 2 8 2 5 30 5 70 UB5420401060 2 4 8 6 8 60 1 110
UB5420205040 1 2 10 2 5 40 5 90 UB5420401070 2 4 8 6 8 70 1 120
UB5420300516 1.5 3 6 4.5 6 16 0.5 60 UB5420401540 2 4 6 6 8 40 1.5 90
UB5420300520 1.5 3 6 4.5 6 20 0.5 65 UB5420401550 2 4 8 6 8 50 1.5 100
UB5420300530 1.5 3 6 4.5 6 30 0.5 70 UB5420401560 2 4 8 6 8 60 1.5 110
UB5420300540 1.5 3 6 4.5 6 40 0.5 80 UB5420401570 2 4 8 6 8 70 1.5 120
UB5420300550 1.5 3 6 4.5 6 50 0.5 90 UB5420403050 2 4 10 6 8 50 3 100
UB5420300560 1.5 3 6 4.5 6 60 0.5 100 UB5420405050 2 4 12 6 8 50 5 100
UB5420301016 1.5 3 6 4.5 6 16 1 60 UB5420501060 2.5 5 8 10 13 60 1 120
UB5420301020 1.5 3 6 4.5 6 20 1 65 UB5420501560 2.5 5 8 10 13 60 1.5 120
UB5420301030 1.5 3 6 4.5 6 30 1 70 UB5420503040 2.5 5 8 10 13 40 3 120
UB5420301040 1.5 3 6 4.5 6 40 1 80 UB5420601060 3 6 8 12 15 60 1 120
UB5420301050 1.5 3 6 4.5 6 50 1 90 UB5420601090 3 6 10 12 15 90 1 150
UB5420301060 1.5 3 6 4.5 6 60 1 100 UB5420601560 3 6 10 12 15 60 1.5 120
UB5420301070 1.5 3 6 4.5 6 70 1 120 UB5420601590 3 6 10 12 15 90 1.5 150
UB5420301516 1.5 3 6 4.5 6 16 1.5 60 UB5420602060 3 6 10 12 15 60 2 120
UB5420301520 1.5 3 6 4.5 6 20 1.5 65 UB5420602090 3 6 12 12 15 90 2 150
UB5420301530 1.5 3 6 4.5 6 30 1.5 70 UB5420603060 3 6 12 12 15 60 3 120
UB5420301540 1.5 3 6 4.5 6 40 1.5 80 UB5420603090 3 6 14 12 15 90 3 150
UB5420301550 1.5 3 6 4.5 6 50 1.5 90 UB54208010100 4 8 12 14 18 100 1 150
UB5420301560 1.5 3 6 4.5 6 60 1.5 100 UB5420801070 4 8 10 14 18 70 1 130
UB5420302016 1.5 3 6 4.5 6 16 2 60 UB54208015100 4 8 14 14 18 100 1.5 150
UB5420302020 1.5 3 6 4.5 6 20 2 65 UB5420801570 4 8 12 14 18 70 1.5 130
UB5420302030 1.5 3 6 4.5 6 30 2 70 UB54208020100 4 8 14 14 18 100 2 150
UB5420302040 1.5 3 6 4.5 6 40 2 80 UB5420802070 4 8 12 14 18 70 2 130
UB5420302050 1.5 3 8 4.5 6 50 2 90 UB54208030100 4 8 18 14 18 100 3 150
UB5420303030 1.5 3 6 4.5 6 30 3 70 UB5420803070 4 8 14 14 18 70 3 130
UB5420303040 1.5 3 8 4.5 6 40 3 90 UB54210010100 5 10 14 18 22 100 1 200
UB5420305030 1.5 3 8 4.5 6 30 5 70 UB5421001070 5 10 12 18 22 70 1 130
UB5420305040 1.5 3 10 4.5 6 40 5 90 UB5421001080 5 10 14 18 22 80 1 150
KORLOY
Y 187
Endmill
U-Star Endmill
UB5
t50-&3"/$&
ØD Ød
DATA
Ø0.1 ~ Ø6 0 ~ -0.012mm
h5
HELIX ±0.005 ±0.01 Ø8 ~ Ø12 0 ~ -0.015mm
θ 13°

1
2
(mm)
Designation R ØD Ød ℓ1 ℓ2 ℓ3 ѡ L R ØD Ød ℓ1 ℓ2 ℓ3 ѡ L
UB54210015100 5 10 16 18 22 100 1.5 200 UB54212015100 6 12 16 22 25 100 1.5 200

UB5421001570 5 10 14 18 22 70 1.5 130 UB5421201560 6 12 14 22 25 60 1.5 130
UB5421001580 5 10 14 18 22 80 1.5 150 UB5421201580 6 12 16 22 25 80 1.5 150
UB54210020100 5 10 16 18 22 100 2 200 UB5421201590 6 12 16 22 25 90 1.5 180
UB5421002070 5 10 14 18 22 70 2 130 UB54212020100 6 12 18 22 25 100 2 200
UB5421002080 5 10 16 18 22 80 2 150 UB5421202060 6 12 16 22 25 60 2 130
UB54210030100 5 10 20 18 22 100 3 200 UB5421202080 6 12 16 22 25 80 2 150
UB5421003070 5 10 16 18 22 70 3 130 UB5421202090 6 12 18 22 25 90 2 180
UB5421003080 5 10 18 18 22 80 3 150 UB54212030100 6 12 20 22 25 100 3 200
UB54212010100 6 12 16 22 25 100 1 200 UB5421203060 6 12 16 22 25 60 3 130
UB5421201060 6 12 14 22 25 60 1 130 UB5421203080 6 12 18 22 25 80 3 150
UB5421201080 6 12 14 22 25 80 1 150 UB5421203090 6 12 20 22 25 90 3 180
UB5421201090 6 12 16 22 25 90 1 180
○ ◎ ◎ ○ ○
188 KORLOY
USB
SB502 2 Flutes straight ball endmill
t50-&3"/$&
ØD Ød
CARBIDE 0 R R AlCrN
DATA
Ø3 ~ Ø6 0 ~ -0.012mm
h5
HELIX ±0.005 ±0.01 Ø8 ~ Ø20 0 ~ -0.015mm

(mm)
USB502030 1.5 3 6 10 70
USB502040 2 4 6 12 70
USB502050 2.5 5 6 18 90
USB502060 3 6 6 20 90
USB502080 4 8 8 25 100
USB502100 5 10 10 30 100
USB502120 6 12 12 32 110
USB502160 8 16 16 35 150
USB502200 10 20 20 40 150
○ ◎ ◎ ○ ○
KORLOY
Y 189
Endmill
U-Star Endmill
UB5
B503 t50-&3"/$&
ØD Ød
DATA
Ø1 ~ Ø12 0 ~ -0.02mm h5
HELIX ±0.005 ±0.01
13°

(mm)
UB503010 0.5 1 6 1 50
UB503015 0.75 1.5 6 1.5 50
UB503020 1 2 6 2 50
UB503030 1.5 3 6 3 60
UB503040 2 4 6 4 70
UB503050 2.5 5 6 5 80
UB503060 3 6 6 6 90
UB503080 4 8 8 8 100
UB503100 5 10 10 10 100
UB503120 6 12 12 12 110
○ ◎ ◎ ○ ○
190 KORLOY
UB5
B504 t50-&3"/$&
ØD Ød
DATA
Ø1 ~ Ø12 0 ~ -0.02mm h5
HELIX ±0.005 ±0.01
13°

(mm)
UB504010 0.5 1 6 1 50
UB504015 0.75 1.5 6 1.5 50
UB504020 1 2 6 2 50
UB504030 1.5 3 6 3 60
UB504040 2 4 6 4 70
UB504050 2.5 5 6 5 80
UB504060 3 6 6 6 90
UB504080 4 8 8 8 100
UB504100 5 10 10 10 100
UB504120 6 12 12 12 110
○ ◎ ◎ ○ ○
KORLOY
Y 191
Endmill
U-Star Endmill
UTB
TB502 2 Flutes tapered ball endmill
t50-&3"/$&
ØD Ød
CARBIDE 30 R AlCrN
DATA
Ø0.3 ~ Ø2 0 ~ -0.03mm h5
HELIX ±0.01
Corner R p.497
θ 13°

(mm)
Designation R ØD Ød ℓ ѡ L Designation R ØD Ød ℓ ѡ L
UTB502003005 0.15 0.3 4 1.2 0.5 40 UTB50200703 0.35 0.7 4 2.5 3 45

UTB50200301 0.15 0.3 4 1.2 1 40 UTB50200705 0.35 0.7 4 2.5 5 45
UTB502003015 0.15 0.3 4 1.2 1.5 40 UTB50200707 0.35 0.7 4 3 7 45
UTB50200302 0.15 0.3 4 1.2 2 40 UTB50200710 0.35 0.7 4 3 10 45
UTB50200303 0.15 0.3 4 1.2 3 40 UTB502008005 0.4 0.8 4 3.2 0.5 45
UTB50200305 0.15 0.3 4 1.2 5 40 UTB50200801 0.4 0.8 4 3.2 1 45
UTB50200307 0.15 0.3 4 1.5 7 40 UTB502008015 0.4 0.8 4 3.2 1.5 45
UTB50200310 0.15 0.3 4 1.5 10 40 UTB50200802 0.4 0.8 4 3.2 2 45
UTB502004005 0.2 0.4 4 1.6 0.5 40 UTB50200803 0.4 0.8 4 3.2 3 45
UTB50200401 0.2 0.4 4 1.6 1 40 UTB50200805 0.4 0.8 4 3.2 5 45
UTB502004015 0.2 0.4 4 1.6 1.5 40 UTB50200807 0.4 0.8 4 3.2 7 45
UTB50200402 0.2 0.4 4 1.6 2 40 UTB50200810 0.4 0.8 4 3.2 10 45
UTB50200403 0.2 0.4 4 1.6 3 40 UTB502010005 0.5 1 4 4 0.5 50
UTB50200405 0.2 0.4 4 1.6 5 40 UTB50201001 0.5 1 4 4 1 50
UTB50200407 0.2 0.4 4 2 7 40 UTB502010015 0.5 1 4 4 1.5 50
UTB50200410 0.2 0.4 4 2 10 40 UTB50201002 0.5 1 4 4 2 50
UTB502005005 0.25 0.5 4 2 0.5 45 UTB50201003 0.5 1 4 4 3 50
UTB50200501 0.25 0.5 4 2 1 45 UTB50201005 0.5 1 4 4 5 50
UTB502005015 0.25 0.5 4 2 1.5 45 UTB50201007 0.5 1 4 4 7 50
UTB50200502 0.25 0.5 4 2 2 45 UTB50201010 0.5 1 4 4 10 50
UTB50200503 0.25 0.5 4 2 3 45 UTB502015005 0.75 1.5 4 6 0.5 50
UTB50200505 0.25 0.5 4 2 5 45 UTB50201501 0.75 1.5 4 6 1 50
UTB50200507 0.25 0.5 4 2.5 7 45 UTB502015015 0.75 1.5 4 6 1.5 50
UTB50200510 0.25 0.5 4 2.5 10 45 UTB50201502 0.75 1.5 4 7 2 50
UTB502006005 0.3 0.6 4 2 0.5 45 UTB50201503 0.75 1.5 4 8 3 50
UTB50200601 0.3 0.6 4 2 1 45 UTB50201505 0.75 1.5 4 10 5 50
UTB502006015 0.3 0.6 4 2 1.5 45 UTB50201507 0.75 1.5 4 10 7 50
UTB50200602 0.3 0.6 4 2 2 45 UTB50201510 0.75 1.5 6 10 10 50
UTB50200603 0.3 0.6 4 2 3 45 UTB502020005 1 2 4 6 0.5 50
UTB50200605 0.3 0.6 4 2 5 45 UTB50202001 1 2 4 6 1 50
UTB50200607 0.3 0.6 4 2.5 7 45 UTB502020015 1 2 4 6 1.5 50
UTB50200610 0.3 0.6 4 2.5 10 45 UTB50202002 1 2 4 10 2 50
UTB502007005 0.35 0.7 4 2.5 0.5 45 UTB50202003 1 2 4 10 3 50
UTB50200701 0.35 0.7 4 2.5 1 45 UTB50202005 1 2 4 10 5 50
UTB502007015 0.35 0.7 4 2.5 1.5 45 UTB50202007 1 2 6 10 7 50
UTB50200702 0.35 0.7 4 2.5 2 45 UTB50202010 1 2 6 11 10 50
○ ◎ ◎ ○ ○
192 KORLOY
UF50
F50 3~5 Flutes chamfer pitch roughing endmill
t50-&3"/$&
ØD Ød
29 31 R DATA
CARBIDE CHAMFERED 3~5 AlCrN
Ø3 ~ Ø25 0 ~ -0.05mm h5
HELIX HELIX ±0.025
Corner R p.498

(mm)
Designation R ØD Ød ℓ L z
UF503030 0.2 3 6 8 50 3
UF503040 0.2 4 6 10 50 3
UF504050 0.2 5 6 13 50 4
UF504060 0.2 6 6 10 50 4
UF50406015 0.2 6 6 15 60 4
UF504070 0.2 7 8 18 70 4
UF504080 0.2 8 8 12 60 4
UF50408020 0.2 8 8 20 70 4
UF504090 0.3 9 10 22 75 4
UF504100 0.3 10 10 15 65 4
UF50410025 0.3 10 10 25 75 4
UF504110 0.3 11 12 27 80 4
UF504120 0.3 12 12 20 70 4
UF50412030 0.3 12 12 30 80 4
UF505130 0.5 13 12 35 100 5
UF505140S16 0.5 14 16 35 100 5
UF505140 0.5 14 14 35 100 5
UF505150 0.5 15 16 35 100 5
UF505160 1 16 16 25 80 5
UF50516040 1 16 16 40 100 5
UF505180S20 1 18 20 40 100 5
UF505180 1 18 18 40 100 5
UF505200 1 20 20 25 80 5
UF50520045 1 20 20 45 100 5
UF505250 1 25 25 45 100 5
○ ◎ ◎ ○ ○
KORLOY
Y 193
Endmill
U-Star Endmill
UF5
F51 3~5 Flutes fine pitch roughing endmill
t50-&3"/$&
ØD Ød
20 DATA Ø3 0 ~ -0.04mm
CARBIDE
FINE 3~5 AlCrN Ø4 ~ Ø6 0 ~ -0.048mm
HELIX Ø7 ~ Ø10 0 ~ -0.058mm h5
p.498 Ø11 ~ Ø18 0 ~ -0.07mm
Ø20 ~ Ø25 0 ~ -0.084mm

(mm)
Designation ØD Ød ℓ L z
UF513030 3 6 8 50 3
UF513040 4 6 10 50 3
UF513050 5 6 13 50 3
UF513060 6 6 15 60 3
UF51306020 6 6 20 60 3
UF513070 7 8 18 70 3
UF513080 8 8 20 70 3
UF51308025 8 8 25 70 3
UF514090 9 10 22 75 4
UF514100 10 10 25 75 4
UF51410030 10 10 30 75 4
UF514110 11 12 27 80 4
UF514120 12 12 30 80 4
UF51412035 12 12 35 80 4
UF514130 13 12 35 100 4
UF514140 14 16 35 100 4
UF514160 16 16 40 100 4
UF514180 18 18 40 100 4
UF514200 20 20 50 100 4
UF515250 25 25 50 100 5
○ ◎ ◎ ○ ○
194 KORLOY
UF5
F51H 3~5 Flutes 45° helix fine pitch roughing endmill
t50-&3"/$&
DATA ØD Ød
45
CARBIDE
FINE 3~5 AlCrN
Ø3 ~ Ø25 0 ~ -0.05mm h5
HELIX
p.499

(mm)
C ØD Ød ℓ L z
UF513030H 0.2 3 6 8 50 3
UF513040H 0.2 4 6 10 50 3
UF514050H 0.3 5 6 13 50 4
UF514060H 0.3 6 6 10 50 4
UF51406015H 0.3 6 6 15 60 4
UF514070H 0.4 7 8 18 70 4
UF514080H 0.4 8 8 12 60 4
UF51408020H 0.4 8 8 20 70 4
UF514090H 0.4 9 10 22 75 4
UF514100H 0.4 10 10 15 65 4
UF51410025H 0.4 10 10 25 75 4
UF514110H 0.5 11 12 27 80 4
UF514120H 0.5 12 12 20 70 4
UF51412030H 0.5 12 12 30 80 4
UF515130H 0.5 13 12 35 100 5
UF515140S16H 0.5 14 16 35 100 5
UF515140H 0.5 14 14 35 100 5
UF515160H 0.5 16 16 25 80 5
UF51516040H 0.5 16 16 40 100 5
UF515180S20H 0.5 18 20 40 100 5
UF515180H 0.5 18 18 40 100 5
UF515200H 0.5 20 20 25 80 5
UF51520045H 0.5 20 20 45 100 5
UF515250H 0.5 25 25 45 100 5
○ ◎ ◎ ○ ○
KORLOY
Y 195
For low hardness
G-Star Endmill
t Suitable for low hardness steel (HRC10 ~ 30); Alloy steel, Carbon steel, Pre-harden, Hardened steel etc.
t General purpose suitable for rough machining, Finishing and curved and sloped surfaces
Features
t Excellent Rake angle and Cutting edge considered the characteristics of workpiece.
t Improved chipping resistance and enhanced machinability by using high toughness materials
t TiAlN coating for enhanced oxidation resistance and chipping resistance
Performance evaluation
Workpiece STC3
Cutting conditions n (rpm) = 4,515, Feed = 845, ap = 10, ae = 0.4
Tools ZE304100P
t Excellent workpiece finishes by

45°high helix angle
KORLOY Competitor
Code system
Z R 3 2 4H 08 10 S4
Type Grade No. of flutes Corner R
D : Dynamic 3 : Grade 2 : 2 Flutes 0.2 ~ 3 mm
Z : G-Star Endmill 2 : Grade 4 : 4 Flutes
T : Thunder 4H : 4 Flutes
Length, (Helix 45º)
Appearance Shank type Cutting dia. Shank dia.
B : Ball 0 : Straight 1 ~ 20 4 ~ 20 mm
E : Flat 1 : Standard
R : Radius 2 : Long Cutting Length
X : Flat 3 : Long Shank
S : Flat 4 : Tapered Neck
XB : Ball
196 KORLOY
DB312 2 Flutes ball nose endmill Ø1.0 ~ 20.0 198
DB342 2 Flutes tapered neck type ball nose endmill Ø1.0 ~ 12.0 199
TX202 2 Flutes short shank flat endmill Ø1.0 ~ 20.0 200
TX204 4 Flutes short shank flat endmill Ø1.0 ~ 20.0 201
TX222 2 Flutes long flat endmill Ø3.0 ~ 20.0 202
TX224 4 Flutes long flat endmill Ø3.0 ~ 20.0 203
TX302 2 Flutes flat endmill Ø1.0 ~ 20.0 204
TX304 4 Flutes flat endmill Ø1.0 ~ 20.0 205
TX304H 4 Flutes 45° helix flat endmill Ø3.0 ~ 20.0 206
TXB202 2 Flutes short shank ball nose endmill Ø1.0 ~ 20.0 207
TXB204 4 Flutes short shank ball nose endmill Ø2.0 ~ 20.0 208
TXB222 2 Flutes long ball nose endmill Ø3.0 ~ 20.0 209
TXB232 2 Flutes long shank ball nose endmill Ø3.0 ~ 20.0 210
TXB302 2 Flutes ball nose endmill Ø1.0 ~ 20.0 211
TXB304 4 Flutes ball nose endmill Ø1.0 ~ 20.0 212
ZE302P 2 Flutes flat endmill Ø1.0 ~ 20.0 213
ZE304P 4 Flutes flat endmill Ø1.0 ~ 20.0 214
ZE322 2 Flutes extra long flat endmill Ø3.0 ~ 20.0 215
ZE324 4 Flutes extra long flat endmill Ø3.0 ~ 20.0 216
ZR304H 4 Flutes 45° helix radius endmill Ø3.0 ~ 12.0 217
ZR322 2 Flutes long shank radius endmill Ø3.0 ~ 12.0 218
ZR324 4 Flutes long shank radius endmill Ø3.0 ~ 12.0 219
ZR324H 4 Flutes 45° helix radius endmill Ø6.0 ~ 12.0 220
KORLOY
Y 197
Endmill
G-Star Endmill
DB312
DB3 2 Flutes ball nose endmill
t50-&3"/$&
ØD Ød
FINE 30 R AiTlN
DATA
GRAIN HELIX ±0.01 All sizes 0 ~ -0.02mm h6.5
All sizes p.500
(mm)
DB312 010 S4 0.5 1 4 2.5 50 DB312 055 2.75 5.5 6 10 80

DB312 010 0.5 1 6 2.5 50 DB312 060S 3 6 6 12 60
DB312 012 0.6 1.2 6 3 50 DB312 060 3 6 6 12 90
DB312 015 0.75 1.5 6 4 50 DB312 065 3.25 6.5 8 12 90
DB312 020 S4 1 2 4 5 50 DB312 070 3.5 7 8 14 90
DB312 020 1 2 6 5 50 DB312 080S 4 8 8 14 60
DB312 025 1.25 2.5 6 6 60 DB312 080 4 8 8 14 100
DB312 030 S3 1.5 3 3 8 60 DB312 090 4.5 9 10 18 100
DB312 030 S4 1.5 3 4 8 60 DB312 100S 5 10 10 18 60
DB312 030 1.5 3 6 8 60 DB312 100 5 10 10 18 100
DB312 035 1.75 3.5 6 8 70 DB312 120 6 12 12 22 110
DB312 040 S4 2 4 4 8 70 DB312 140 7 14 14 26 110
DB312 040 2 4 6 8 70 DB312 160 8 16 16 30 140
DB312 045 2.25 4.5 6 8 70 DB312 180 9 18 18 34 140
DB312 050 2.5 5 6 10 80 DB312 200 10 20 20 38 160
~ HB225 HB225~325 HRC30~50 SKD61~HRC55 SKD11 HRC55~ ~FCD500
◎ ◎ ○
198 KORLOY
DB342
DB3 2 Flutes tapered neck type ball nose endmill
t50-&3"/$&
ØD Ød
FINE 30 R AiTlN
DATA
GRAIN HELIX ±0.01 All sizes 0 ~ -0.02mm h6
All sizes p.500
θ
13°
1
R 2
(mm)
Designation R ØD Ød ℓ1 ℓ2 ℓ3 ѡ L
DB342 01015 0.5 1 6 2 4 23 1˚30´ 60

DB342 01050 0.5 1 6 2 4 23 5˚ 60
DB342 01030 0.5 1 6 2 4 42 3˚ 80
DB342 02015 1 2 6 4 6 23 1˚30´ 60
DB342 02050 1 2 6 4 6 23 5˚ 60
DB342 02030 1 2 6 4 6 41 3˚ 80
DB342 03030 1.5 3 6 6 8 32 3˚ 70
DB342 03015 1.5 3 6 6 8 52 1˚30´ 90
DB342 04030 2 4 6 8 10 28 3˚ 70
DB342 04015 2 4 6 8 10 49 1˚30´ 90
DB342 05030 2.5 5 8 10 12 41 3˚ 90
DB342 05015 2.5 5 8 10 12 61 1˚30´ 110
DB342 06030 3 6 8 12 15 34 3˚ 90
DB342 06015 3 6 8 12 15 53 1˚30´ 110
DB342 08030 4 8 10 14 17 36 3˚ 100
DB342 08015 4 8 10 14 17 55 1˚30´ 120
DB342 10030 5 10 12 18 21 40 3˚ 110
DB342 10015 5 10 12 18 21 59 1˚30´ 130
DB342 12030 6 12 16 22 25 63 3˚ 140
DB342 12015 6 12 16 22 25 83 1˚30´ 160
◎ ◎ ○
KORLOY
Y 199
Endmill
G-Star Endmill
TX20
X202 2 Flutes short shank flat endmill
t50-&3"/$&
ØD Ød
FINE 30 DATA Ø1 ~ Ø3 -0.014 ~ -0.028mm
GRAIN
AiTlN Ø4 ~ Ø6 -0.02 ~ -0.038mm
HELIX Ø7 ~ Ø10 -0.025 ~ -0.047mm h6
p.501 Ø12 ~ Ø18 -0.032 ~ -0.059mm
Ø20 ~ -0.04 ~ -0.073mm
(mm)
TX202 010 1 3 3 39
TX202 015 1.5 3 5 39
TX202 020 2 3 7 39
TX202 025 2.5 3 8 39
TX202 030 3 3 10 39
TX202 040 4 4 14 51
TX202 050 5 5 16 51
TX202 060 6 6 19 64
TX202 080 8 8 21 64
TX202 100 10 10 25 70
TX202 120 12 12 25 76
TX202 160 16 16 32 89
TX202 200 20 20 38 102
◎ ◎ ○
200 KORLOY
TX20
X204 4 Flutes short shank flat endmill
t50-&3"/$&
ØD Ød
FINE 30 DATA Ø1 ~ Ø3 -0.014 ~ -0.028mm
GRAIN
AiTlN Ø4 ~ Ø6 -0.02 ~ -0.038mm
HELIX Ø7 ~ Ø10 -0.025 ~ -0.047mm h6
p.502 Ø12 ~ Ø18 -0.032 ~ -0.059mm
Ø20 ~ -0.04 ~ -0.073mm
(mm)
TX204 010 1 3 3 39
TX204 015 1.5 3 5 39
TX204 020 2 3 7 39
TX204 025 2.5 3 8 39
TX204 030 3 3 10 39
TX204 040 4 4 14 51
TX204 050 5 5 16 51
TX204 060 6 6 19 64
TX204 080 8 8 21 64
TX204 100 10 10 25 70
TX204 120 12 12 25 76
TX204 160 16 16 32 89
TX204 200 20 20 38 102
◎ ◎ ○
KORLOY
Y 201
Endmill
G-Star Endmill
TX22
X222 t50-&3"/$&
2 Flutes long flat endmill
ØD Ød
FINE 30 DATA Ø1 ~ Ø3 -0.014 ~ -0.028mm
GRAIN
AiTlN Ø4 ~ Ø6 -0.02 ~ -0.038mm
HELIX Ø7 ~ Ø10 -0.025 ~ -0.047mm h6
p.501 Ø12 ~ Ø18 -0.032 ~ -0.059mm
Ø20 ~ -0.04 ~ -0.073mm
(mm)
TX222 030 3 3 20 60
TX222 040 4 4 20 60
TX222 050 5 5 25 75
TX222 060 6 6 30 75
TX222 080 8 8 30 75
TX222 100 10 10 40 100
TX222 120 12 12 45 100
TX222 140 14 14 45 100
TX222 160 16 16 45 100
TX222 180 18 18 45 100
TX222 200 20 20 45 100
◎ ◎ ○
202 KORLOY
TX22
X224 t50-&3"/$&
4 Flutes long flat endmill
ØD Ød
FINE 30 DATA Ø1 ~ Ø3 -0.014 ~ -0.028mm
GRAIN
AiTlN Ø4 ~ Ø6 -0.02 ~ -0.038mm
HELIX Ø7 ~ Ø10 -0.025 ~ -0.047mm h6
p.502 Ø12 ~ Ø18 -0.032 ~ -0.059mm
Ø20 ~ -0.04 ~ -0.073mm
(mm)
TX224 030 3 3 20 60
TX224 040 4 4 20 60
TX224 050 5 5 25 75
TX224 060 6 6 30 75
TX224 080 8 8 30 75
TX224 081 8 8 30 100
TX224 100 10 10 40 100
TX224 120 12 12 45 100
TX224 140 14 14 45 100
TX224 160 16 16 45 100
TX224 180 18 18 45 100
TX224 200 20 20 45 100
◎ ◎ ○
KORLOY
Y 203
Endmill
G-Star Endmill
TX30
X302 t50-&3"/$&
ØD Ød
FINE 30 DATA Ø1 ~ Ø3 -0.014 ~ -0.028mm
GRAIN
AiTlN Ø4 ~ Ø6 -0.02 ~ -0.038mm
HELIX Ø7 ~ Ø10 -0.025 ~ -0.047mm h6
p.502 Ø12 ~ Ø18 -0.032 ~ -0.059mm
Ø20 ~ -0.04 ~ -0.073mm
(mm)
TX302 010 1 4 3 50
TX302 015 1.5 4 4 50
TX302 020 2 4 6 50
TX302 025 2.5 4 8 50
TX302 030 3 4 9 50
TX302 040 4 4 11 50
TX302 050 5 6 13 50
TX302 060 6 6 16 50
TX302 070 7 8 16 60
TX302 080 8 8 19 60
TX302 090 9 10 19 60
TX302 100 10 10 25 75
TX302 120 12 12 30 75
TX302 140 14 14 32 75
TX302 160 16 16 32 100
TX302 180 18 18 32 100
TX302 200 20 20 38 100
◎ ◎ ○
204 KORLOY
TX30
X304 t50-&3"/$&
ØD Ød
FINE 30 DATA Ø1 ~ Ø3 -0.014 ~ -0.028mm
GRAIN
AiTlN Ø4 ~ Ø6 -0.02 ~ -0.038mm
HELIX Ø7 ~ Ø10 -0.025 ~ -0.047mm h6
p.502 Ø12 ~ Ø18 -0.032 ~ -0.059mm
Ø20 ~ -0.04 ~ -0.073mm
(mm)
TX304 010 1 4 3 50
TX304 015 1.5 4 4 50
TX304 020 2 4 6 50
TX304 025 2.5 4 8 50
TX304 030 3 4 9 50
TX304 040 4 4 11 50
TX304 050 5 6 13 50
TX304 060 6 6 16 50
TX304 070 7 8 16 60
TX304 080 8 8 19 60
TX304 090 9 10 19 60
TX304 100 10 10 25 75
TX304 120 12 12 30 75
TX304 140 14 14 32 75
TX304 160 16 16 32 100
TX304 180 18 18 32 100
TX304 200 20 20 38 100
◎ ◎ ○
KORLOY
Y 205
Endmill
G-Star Endmill
TX304
X304H 4 Flutes 45° helix flat endmill
t50-&3"/$&
ØD Ød
FINE 45 DATA Ø1 ~ Ø3 -0.014 ~ -0.028mm
GRAIN
AiTlN Ø4 ~ Ø6 -0.02 ~ -0.038mm
HELIX Ø7 ~ Ø10 -0.025 ~ -0.047mm h6
p.503 Ø12 ~ Ø18 -0.032 ~ -0.059mm
Ø20 ~ -0.04 ~ -0.073mm
(mm)
TX304H 030 3 6 8 50
TX304H 030 S3 3 3 8 50
TX304H 030 S4 3 4 8 50
TX304H 040 4 6 11 50
TX304H 040 S4 4 4 11 50
TX304H 050 5 6 13 50
TX304H 060 6 6 13 50
TX304H 080 8 8 19 60
TX304H 100 10 10 22 70
TX304H 120 12 12 26 75
TX304H 130 13 12 26 80
TX304H 140 14 14 26 80
TX304H 160 16 16 32 90
TX304H 180 18 18 32 100
TX304H 200 20 20 38 100
◎ ◎ ○
206 KORLOY
TXB2
XB202 2 Flutes short shank ball nose endmill
t50-&3"/$&
ØD Ød
FINE 30 R AiTlN
DATA
All sizes p.503
(mm)
TXB202 010 0.5 1 3 3 39

TXB202 015 0.75 1.5 3 5 39
TXB202 020 1 2 3 7 39
TXB202 025 1.25 2.5 3 8 39
TXB202 030 1.5 3 3 10 39
TXB202 040 2 4 4 14 51
TXB202 050 2.5 5 5 16 51
TXB202 060 3 6 6 19 64
TXB202 080 4 8 8 21 64
TXB202 100 5 10 10 25 70
TXB202 120 6 12 12 25 76
TXB202 160 8 16 16 32 89
TXB202 200 10 20 20 38 100
◎ ◎ ○
KORLOY
Y 207
Endmill
TXB2
XB204 4 Flutes short shank ball nose endmill
t50-&3"/$&
ØD Ød
FINE 30 R AiTlN
DATA
All sizes p.504
(mm)
TXB204 020 1 2 3 7 39
TXB204 030 1.5 3 3 10 39
TXB204 040 2 4 4 14 51
TXB204 050 2.5 5 5 16 51
TXB204 060 3 6 6 19 64
TXB204 080 4 8 8 21 64
TXB204 100 5 10 10 25 70
TXB204 120 6 12 12 25 76
TXB204 160 8 16 16 32 89
TXB204 200 10 20 20 38 100
◎ ◎ ○
208 KORLOY
TXB2
XB222 2 Flutes long ball nose endmill
t50-&3"/$&
ØD Ød
FINE 30 R AiTlN
DATA
All sizes p.503
(mm)
TXB222 030 1.5 3 3 20 60

TXB222 040 2 4 4 20 60
TXB222 050 2.5 5 5 25 75
TXB222 060 3 6 6 30 75
TXB222 080 4 8 8 30 100
TXB222 100 5 10 10 40 100
TXB222 120 6 12 12 45 100
TXB222 140 7 14 14 45 100
TXB222 160 8 16 16 45 100
TXB222 180 9 18 18 45 100
TXB222 200 10 20 20 45 100
◎ ◎ ○
KORLOY
Y 209
Endmill
G-Star Endmill
TXB2
XB232 2 Flutes long shank ball nose endmill
t50-&3"/$&
ØD Ød
FINE 30 R AiTlN
DATA
All sizes p.503
(mm)
TXB232 030 1.5 3 3 5 75

TXB232 040 2 4 4 8 75
TXB232 050 2.5 5 5 9 75
TXB232 060 3 6 6 10 100
TXB232 060-75 3 6 6 10 75
TXB232 080 4 8 8 12 100
TXB232 080-75 4 8 8 12 75
TXB232 100 5 10 10 14 100
TXB232 100L 5 10 10 14 150
TXB232 120 6 12 12 16 100
TXB232 120L 6 12 12 16 150
TXB232 140 7 14 14 18 100
TXB232 160 8 16 16 22 150
TXB232 200 10 20 20 26 150
◎ ◎ ○
210 KORLOY
TXB3
XB302 2 Flutes ball nose endmill
t50-&3"/$&
ØD Ød
FINE 30 R AiTlN
DATA
All sizes p.503
(mm)
TXB302 010 0.5 1 4 2 50

TXB302 015 0.75 1.5 4 3 50
TXB302 020 1 2 4 4 50
TXB302 025 1.25 2.5 4 6 50
TXB302 030 1.5 3 4 6 50
TXB302 040 2 4 4 8 50
TXB302 050 2.5 5 6 10 50
TXB302 060 3 6 6 12 50
TXB302 080 4 8 8 14 60
TXB302 100 5 10 10 18 75
TXB302 120 6 12 12 22 75
TXB302 140 7 14 14 32 75
TXB302 160 8 16 16 32 100
TXB302 180 9 18 18 32 100
TXB302 200 10 20 20 38 100
◎ ◎ ○
KORLOY
Y 211
Endmill
G-Star Endmill
TXB3
XB304 4 Flutes ball nose endmill
t50-&3"/$&
ØD Ød
FINE 30 R AiTlN
DATA
All sizes p.504
(mm)
TXB304 010 0.5 1 4 2 50

TXB304 015 0.75 1.5 4 3 50
TXB304 020 1 2 4 4 50
TXB304 030 1.5 3 4 6 50
TXB304 040 2 4 4 8 50
TXB304 050 2.5 5 6 10 50
TXB304 060 3 6 6 12 50
TXB304 080 4 8 8 14 60
TXB304 100 5 10 10 18 75
TXB304 120 6 12 12 22 75
TXB304 140 7 14 14 32 75
TXB304 160 8 16 16 32 100
TXB304 180 9 18 18 32 100
TXB304 200 10 20 20 38 100
◎ ◎ ○
212 KORLOY
ZE302
E302P t50-&3"/$&
DATA ØD Ød
FINE 30
GRAIN
AiTlN All sizes 0 ~ -0.02mm h6
HELIX
p.505
(mm)
ZE302 010P 1 6 2.5 50

ZE302 015P 1.5 6 4 50
ZE302 020P 2 6 6 50
ZE302 025P 2.5 6 8 50
ZE302 030P 3 6 10 50
ZE302 035P 3.5 6 10 50
ZE302 040P 4 6 12 50
ZE302 045P 4.5 6 14 50
ZE302 050P 5 6 15 60
ZE302 055P 5.5 6 15 60
ZE302 060P 6 6 15 60
ZE302 065P 6.5 8 18 60
ZE302 070P 7 8 20 65
ZE302 075P 7.5 8 20 65
ZE302 080P 8 8 20 65
ZE302 085P 8.5 10 22 70
ZE302 090P 9 10 22 70
ZE302 095P 9.5 10 24 70
ZE302 100P 10 10 25 70
ZE302 105P 10.5 12 26 80
ZE302 110P 11 12 30 80
ZE302 115P 11.5 12 30 80
ZE302 120P 12 12 30 80
ZE302 130P 13 12 35 90
ZE302 140P 14 14 35 100
ZE302 150P 15 16 40 100
ZE302 160P 16 16 40 100
ZE302 180P 18 18 45 100
ZE302 200P 20 20 45 100
◎ ◎ ○
KORLOY
Y 213
Endmill
G-Star Endmill
ZE304
E304P t50-&3"/$&
DATA ØD Ød
FINE 30
GRAIN
HELIX
p.506
(mm)
ZE304 010P 1 6 2.5 50

ZE304 015P 1.5 6 4 50
ZE304 020P 2 6 6 50
ZE304 025P 2.5 6 8 50
ZE304 030P 3 6 10 50
ZE304 035P 3.5 6 10 50
ZE304 040P 4 6 12 50
ZE304 045P 4.5 6 14 50
ZE304 050P 5 6 15 60
ZE304 055P 5.5 6 15 60
ZE304 060P 6 6 15 60
ZE304 065P 6.5 8 18 60
ZE304 070P 7 8 20 65
ZE304 075P 7.5 8 20 65
ZE304 080P 8 8 20 65
ZE304 085P 8.5 10 22 70
ZE304 090P 9 10 22 70
ZE304 095P 9.5 10 24 70
ZE304 100P 10 10 25 70
ZE304 105P 10.5 12 26 80
ZE304 110P 11 12 30 80
ZE304 115P 11.5 12 30 80
ZE304 120P 12 12 30 80
ZE304 130P 13 12 35 90
ZE304 140P 14 14 35 100
ZE304 150P 15 16 40 100
ZE304 160P 16 16 40 100
ZE304 180P 18 18 45 100
ZE304 200P 20 20 45 100
◎ ◎ ○
214 KORLOY
ZE32
E322 2 Flutes extra long flat endmill
t50-&3"/$&
DATA ØD Ød
FINE 30
GRAIN
HELIX
p.505
(mm)
ZE322 030 3 6 15 60 ZE322 101 10 10 35 100

ZE322 031 3 6 20 70 ZE322 102 10 10 45 150
ZE322 030S 3 3 20 100 ZE322 103 10 10 55 180
ZE322 040 4 6 15 60 ZE322 120 12 12 30 90
ZE322 041 4 6 20 70 ZE322 121 12 12 40 110
ZE322 040S 4 4 20 100 ZE322 122 12 12 50 150
ZE322 050 5 6 20 60 ZE322 123 12 12 60 200
ZE322 051 5 6 20 80 ZE322 140 14 14 40 120
ZE322 052 5 6 25 100 ZE322 141 14 14 60 150
ZE322 060 6 6 20 80 ZE322 160 16 16 50 140
ZE322 061 6 6 30 100 ZE322 161 16 16 70 160
ZE322 062 6 6 40 150 ZE322 162 16 16 80 200
ZE322 080 8 8 30 90 ZE322 180 18 18 50 140
ZE322 081 8 8 35 100 ZE322 200 20 20 60 150
ZE322 082 8 8 40 150 ZE322 201 20 20 100 200
ZE322 100 10 10 30 90 ZE322 202 20 20 130 250
◎ ◎ ○
KORLOY
Y 215
Endmill
G-Star Endmill
ZE32
E324 4 Flutes extra long flat endmill
t50-&3"/$&
DATA ØD Ød
FINE 30
GRAIN
HELIX
(mm)
ZE324 030 3 6 15 60 ZE324 101 10 10 35 100

ZE324 031 3 6 20 70 ZE324 102 10 10 45 150
ZE324 030S 3 3 20 100 ZE324 103 10 10 55 180
ZE324 040 4 6 15 60 ZE324 120 12 12 30 90
ZE324 041 4 6 20 70 ZE324 121 12 12 40 110
ZE324 040S 4 4 20 100 ZE324 122 12 12 50 150
ZE324 050 5 6 20 60 ZE324 123 12 12 60 200
ZE324 051 5 6 20 80 ZE324 140 14 14 40 120
ZE324 052 5 6 25 100 ZE324 141 14 14 60 150
ZE324 060 6 6 20 80 ZE324 160 16 16 50 140
ZE324 061 6 6 30 100 ZE324 161 16 16 70 160
ZE324 062 6 6 40 150 ZE324 162 16 16 80 200
ZE324 080 8 8 30 90 ZE324 180 18 18 50 140
ZE324 081 8 8 35 100 ZE324 200 20 20 60 150
ZE324 082 8 8 40 150 ZE324201 20 20 100 200
ZE324 100 10 10 30 90 ZE324202 20 20 130 250
◎ ◎ ○
216 KORLOY
ZR30
R304H 4 Flutes 45° helix radius endmill
t50-&3"/$&
DATA ØD Ød
FINE 45 R
GRAIN
HELIX ±0.02
All sizes p.504
13°
2
R
(mm)
ZR304H 0303 0.3 3 6 4 12 55

ZR304H 0302S3 0.2 3 3 4 12 55
ZR304H 0303S4 0.3 3 4 4 12 55
ZR304H 0305 0.5 3 6 4 12 55
ZR304H 0305S3 0.5 3 3 4 12 55
ZR304H 0305S4 0.5 3 4 4 12 55
ZR304H 0402S4 0.2 4 4 5 16 55
ZR304H 0403 0.3 4 6 5 16 55
ZR304H 0403S4 0.3 4 4 5 16 55
ZR304H 0405 0.5 4 6 5 16 55
ZR304H 0405S4 0.5 4 4 5 16 55
ZR304H 0605 0.5 6 6 7 20 60
ZR304H 0610 1 6 6 7 20 60
ZR304H 0805 0.5 8 8 10 25 65
ZR304H 0810 1 8 8 10 25 65
ZR304H 1005 0.5 10 10 12 30 70
ZR304H 1010 1 10 10 12 30 70
ZR304H 1015 1.5 10 10 12 30 70
ZR304H 1020 2 10 10 12 30 70
ZR304H 1205 0.5 12 12 15 30 80
ZR304H 1210 1 12 12 15 30 80
ZR304H 1215 1.5 12 12 15 30 80
ZR304H 1220 2 12 12 15 30 80
◎ ◎ ○
KORLOY
Y 217
Endmill
G-Star Endmill
ZR3
R322 2 Flutes long shank radius endmill
t50-&3"/$&
ØD Ød
FINE 30 R AiTlN
DATA
All sizes p.507
(mm)
ZR322 0302S4 0.2 3 4 8 60 ZR322 0610 1 6 6 13 90

ZR322 0302 0.2 3 6 8 60 ZR322 0803 0.3 8 8 19 100
ZR322 0303 0.3 3 6 8 60 ZR322 0805 0.5 8 8 19 100
ZR322 0305S4 0.5 3 4 8 60 ZR322 0810 1 8 8 19 100
ZR322 0305 0.5 3 6 8 60 ZR322 0815 1.5 8 8 19 100
ZR322 0402S4 0.2 4 4 11 70 ZR322 0820 2 8 8 19 100
ZR322 0402 0.2 4 6 11 70 ZR322 1003 0.3 10 10 22 100
ZR322 0403 0.3 4 6 11 70 ZR322 1005 0.5 10 10 22 100
ZR322 0405S4 0.5 4 4 11 70 ZR322 1010 1 10 10 22 100
ZR322 0405 0.5 4 6 11 70 ZR322 1015 1.5 10 10 22 100
ZR322 0410S4 1 4 4 11 70 ZR322 1020 2 10 10 22 100
ZR322 0410 1 4 6 11 70 ZR322 1025 2.5 10 10 22 100
ZR322 0502 0.2 5 6 13 80 ZR322 1205 0.5 12 12 26 110
ZR322 0503 0.3 5 6 13 80 ZR322 1210 1 12 12 26 110
ZR322 0505 0.5 5 6 13 80 ZR322 1215 1.5 12 12 26 110
ZR322 0510 1 5 6 13 80 ZR322 1220 2 12 12 26 110
ZR322 0602 0.2 6 6 13 90 ZR322 1225 2.5 12 12 26 110
ZR322 0603 0.3 6 6 13 90 ZR322 1230 3 12 12 26 110
ZR322 0605 0.5 6 6 13 90
◎ ◎ ○
218 KORLOY
ZR3
R324 4 Flutes long shank radius endmill
t50-&3"/$&
ØD Ød
FINE 30 R AiTlN
DATA
All sizes p.507
(mm)
ZR324 0302S4 0.2 3 4 8 60 ZR324 0610 1 6 6 13 90

ZR324 0302 0.2 3 6 8 60 ZR324 0803 0.3 8 8 19 100
ZR324 0303 0.3 3 6 8 60 ZR324 0805 0.5 8 8 19 100
ZR324 0305S4 0.5 3 4 8 60 ZR324 0810 1 8 8 19 100
ZR324 0305 0.5 3 6 8 60 ZR324 0815 1.5 8 8 19 100
ZR324 0402S4 0.2 4 4 11 70 ZR324 0820 2 8 8 19 100
ZR324 0402 0.2 4 6 11 70 ZR324 1003 0.3 10 10 22 100
ZR324 0403 0.3 4 6 11 70 ZR324 1005 0.5 10 10 22 100
ZR324 0405S4 0.5 4 4 11 70 ZR324 1010 1 10 10 22 100
ZR324 0405 0.5 4 6 11 70 ZR324 1015 1.5 10 10 22 100
ZR324 0410S4 1 4 4 11 70 ZR324 1020 2 10 10 22 100
ZR324 0410 1 4 6 11 70 ZR324 1025 2.5 10 10 22 100
ZR324 0502 0.2 5 6 13 80 ZR324 1205 0.5 12 12 26 110
ZR324 0503 0.3 5 6 13 80 ZR324 1210 1 12 12 26 110
ZR324 0505 0.5 5 6 13 80 ZR324 1215 1.5 12 12 26 110
ZR324 0510 1 5 6 13 80 ZR324 1220 2 12 12 26 110
ZR324 0602 0.2 6 6 13 90 ZR324 1225 2.5 12 12 26 110
ZR324 0603 0.3 6 6 13 90 ZR324 1230 3 12 12 26 110
ZR324 0605 0.5 6 6 13 90
◎ ◎ ○
KORLOY
Y 219
Endmill
G-Star Endmill
ZR32
R324H 4 Flutes 45° helix radius endmill
t50-&3"/$&
DATA ØD Ød
FINE 45 R
GRAIN
HELIX ±0.02
All sizes p.504
13°
2
R
(mm)
ZR324H 0605 0.5 6 6 9 20 90

ZR324H 0610 1 6 6 9 20 90
ZR324H 0805 0.5 8 8 12 25 100
ZR324H 0810 1 8 8 12 25 100
ZR324H 1005 0.5 10 10 15 32 100
ZR324H 1010 1 10 10 15 32 100
ZR324H 1015 1.5 10 10 15 32 100
ZR324H 1020 2 10 10 15 32 100
ZR324H 1205 0.5 12 12 18 38 110
ZR324H 1210 1 12 12 18 38 110
ZR324H 1215 1.5 12 12 18 38 110
ZR324H 1220 2 12 12 18 38 110
◎ ◎ ○
220 KORLOY
High efficient roughing endmill
+
R Endmill
t Cost-effective cutting-edge design for rough machining
t Specifically designed corners as irregular flute spacing and lead angle
Features
t Excellent machining efficiency - Special design for medium to rough cu
utting
t Longer cutting life - Extended tool cost thanks to newly applied gradess
t Higher cutting performance - Blade design ideal for roughing
β1°
α2 ° β2°
α1°
t Lower cutting t Soft cutting

- Ideal for medium to - Serrated cutting edges
rough cutting - 3 Combo R ( α1° ≠ α2° ) ( β1° ≠ β2° )
- Special edge design t Irregular flute spacing to t Irregular lead angles to
prevent chattering disperse cutting force
Grade system
Carbide roughing HSS roughing
FN30T Carbide, uncoated HN30T HSS PM, uncoated
PC10T Carbide, TiCN coated HN20T HSS, uncoated
PC20T Carbide, TiN coated HC10T HSS, TiCN coated
PC30T Carbide, TiAIN coated HC20T HSS, TiN coated
PC40T Carbide, TiAlCrN coated HC30T HSS PM, TiAlN coated
Application examples
Workpiece Mold Workpiece Mold
Cutting conditions vc (m/min) = 57, fz (mm/t) = 0.03 Cutting conditions vc (m/min) = 68, fz (mm/t) = 0.06
ap (mm) = 8, dry ap (mm) = 8, dry
Tools RPE4080-075-FF Tools RPE4080-063-FP-H
[ Test result ] [ Test result ]

Cutting time (hours)
40%
more
11
30%
more 8
7
5.5
R+ Endmill Competitor R+ Endmill Competitor
KORLOY
Y 221
Endmill
R+ Endmill
RPAE
PAE Wave roughing endmill for Al
t50-&3"/$&
Substrate DATA ØD Ød
45
FN30T Ø6 ~ Ø25 0 ~ -0.05mm h6
HELIX
p.508
tCarbide
(mm)
Designation ØD Ød ℓ L C
RPAE 3060-063 6 6 18 63 0.3

RPAE 3070-063 7 8 23 63 0.3
RPAE 3080-063 8 8 23 63 0.3
RPAE 3090-080 9 10 30 80 0.3
RPAE 3100-080 10 10 30 80 0.3
RPAE 3110-080 11 12 32 80 0.5
RPAE 3120-080 12 12 32 80 0.5
RPAE 3140-080 14 14 32 80 0.5
RPAE 3160-105 16 16 48 105 0.5
RPAE 3180-105 18 18 48 105 0.5
RPAE 3200-105 20 20 50 105 0.5
RPAE 3250-105 25 25 50 105 0.5
RPE-FP
PE-FP-H Fine pitch standard type roughing endmill
t50-&3"/$&
40 /42
PC30T Ø5 ~ Ø20 0 ~ -0.05mm h6
HELIX
p.508
tCarbide, High helix angle, irregular flute spacing and lead

(mm)
RPE 4050-057-FP-H 5 6 13 57 0.3

RPE 4060-057-FP-H 6 6 13 57 0.5
RPE 4080-063-FP-H 8 8 19 63 0.5
RPE 4100-072-FP-H 10 10 22 72 0.5
RPE 4120-082-FP-H 12 12 26 82 0.5
RPE 4140-082-FP-H 14 16 26 82 0.6
RPE 4160-092-FP-H 16 16 32 92 0.6
RPE 4180-092-FP-H 18 20 32 92 0.6
RPE 4200-0104-FP-H 20 20 38 104 0.6
222 KORLOY
RPLE-FP
LE-FP-H Fine pitch long type roughing endmill
t50-&3"/$&
40 /42
PC30T Ø5 ~ Ø20 0 ~ -0.05mm h6
HELIX
p.508
tCarbide, High helix angle, irregular flute spacing and lead (mm)
RPLE 4050-063-FP-H 5 6 19 63 0.3

RPLE 4060-063-FP-H 6 8 19 63 0.5
RPLE 4080-072-FP-H 8 8 28 72 0.5
RPLE 4100-082-FP-H 10 10 34 82 0.5
RPLE 4120-097-FP-H 12 12 40 97 0.5
RPLE 4140-097-FP-H 14 16 40 97 0.6
RPLE 4160-108-FP-H 16 16 48 108 0.6
RPLE 4180-108-FP-H 18 20 48 108 0.6
RPLE 4200-122-FP-H 20 20 56 122 0.6
RPE-X
PE-XG Endmill for finishing and roughing
t50-&3"/$&
30
PC30T Ø6 ~ Ø20 0 ~ -0.05mm h6
HELIX
p.509
tCarbide
(mm)
RPE 4060-052-XG 6 6 14 52 0.25

RPE 4070-063-XG 7 8 18 63 0.3
RPE 4080-063-XG 8 8 18 63 0.3
RPE 4090-080-XG 9 10 22 80 0.3
RPE 4100-080-XG 10 10 22 80 0.3
RPE 4110-080-XG 11 12 26 80 0.4
RPE 4120-080-XG 12 12 26 80 0.4
RPE 4140-080-XG 14 14 30 80 0.4
RPE 4160-105-XG 16 16 34 105 0.6
RPE 4180-105-XG 18 18 38 105 0.6
RPE 4200-105-XG 20 20 42 105 0.6
KORLOY
Y 223
Endmill
R+ Endmill
RPE-FP
PE-FP-L Roughing endmill for fine pitches
t50-&3"/$&
18 /23
PC30T Ø5 ~ Ø20 0 ~ -0.05mm h6
HELIX
p.509
tCarbide, irregular flute spacing and lead (mm)
RPE 4050-060-FP-L 5 6 13 60 0.3

RPE 4060-080-FP-L 6 8 13 80 0.5
RPE 4080-080-FP-L 8 8 19 80 0.5
RPE 4100-080-FP-L 10 10 22 80 0.5
RPE 4120-080-FP-L 12 12 26 80 0.5
RPE 4140-085-FP-L 14 16 26 85 0.6
RPE 4160-100-FP-L 16 16 32 100 0.6
RPE 4180-100-FP-L 18 20 32 100 0.6
RPE 4200-105-FP-L 20 20 38 105 0.6
RPE-R
PE-RG Standard roughing endmill
t50-&3"/$&
30
PC40T Ø5 ~ Ø20 0 ~ -0.05mm h6
HELIX
p.510
tCarbide
(mm)
RPE 4050-050-RG 5 6 13 50 0.3

RPE 4060-050-RG 6 6 16 50 0.3
RPE 4080-060-RG 8 8 20 60 0.3
RPE 4100-075-RG 10 10 25 75 0.3
RPE 4120-080-RG 12 12 30 80 0.4
RPE 4140-100-RG 14 16 35 100 0.6
RPE 4160-100-RG 16 16 40 100 0.6
RPE 4180-110-RG 18 20 40 110 0.6
RPE 4200-110-RG 20 20 45 110 0.6
224 KORLOY
RPE-R
PE-RG 4F Roughing endmill
t50-&3"/$&
30 HSS
PM HN30T Ø6 ~ Ø20 ±0.1mm h6
HELIX HC30T
p.510
tHSS PM (mm)
RPE 4060-060-RG 6 6 20 60
RPE 4070-070-RG 7 10 20 70
RPE 4080-075-RG 8 10 25 75
RPE 4090-075-RG 9 10 30 75
RPE 4100-085-RG 10 10 35 85
RPE 4120-100-RG 12 12 40 100
RPE 4140-100-RG 14 16 40 100
RPE 4160-110-RG 16 16 50 110
RPE 4180-110-RG 18 20 50 110
RPE 4200-125-RG 20 20 60 125
RPE-F
PE-FF Roughing endmill for fine pitches
t50-&3"/$&
25 /30 HSS
PM HC30T Ø6 ~ Ø20 ±0.1mm h6
HELIX
p.510
tHSS PM, Irregular flute spacing (mm)
RPE 4060-060-FF 6 6 20 60 0.5

RPE 4070-070-FF 7 10 20 70 0.5
RPE 4080-075-FF 8 10 25 75 0.5
RPE 4090-075-FF 9 10 30 75 0.5
RPE 4100-085-FF 10 10 35 85 0.5
RPE 4120-100-FF 12 12 40 100 0.6
RPE 4140-100-FF 14 12 40 100 0.6
RPE 4160-110-FF 16 16 50 110 0.6
RPE 4180-110-FF 18 16 50 110 0.6
RPE 4200-125-FF 20 20 60 125 0.6
KORLOY
Y 225
Endmill
R+ Endmill
RPE-F
PE-FP Roughing endmill for fine pitches
t50-&3"/$&
25 /30 HSS Ø6 ~ Ø12 0 ~ -0.05mm
PM HC30T h6
HELIX Ø12.1 ~ Ø20 0 ~ -0.1mm
p.510
tHSS PM, irregular flute spacing and lead (mm)
RPE 4060-080-FP 6 6 13 80 0.5

RPE 4070-080-FP 7 10 16 80 0.5
RPE 4080-085-FP 8 10 19 85 0.5
RPE 4090-095-FP 9 10 19 95 0.5
RPE 4100-100-FP 10 10 22 100 0.5
RPE 4120-110-FP 12 12 26 110 0.6
RPE 4140-110-FP 14 12 26 110 0.6
RPE 4160-125-FP 16 16 32 125 0.6
RPE 4180-125-FP 18 16 32 125 0.6
RPE 4200-140-FP 20 20 38 140 0.6
226 KORLOY
RPE-R
PE-RG t50-&3"/$&
Roughing endmill
30 HSS HN20T
Co 8% HC20T Ø6 ~ Ø50 ±0.1mm h6
HELIX HC10T
p.511
tHSS
(mm)
RPE 4060-060-RG 6 6 15 60
RPE 4070-065-RG 7 8 20 65
RPE 4080-065-RG 8 8 20 65
RPE 4090-075-RG 9 10 25 75
RPE 4100-075-RG 10 10 25 75
RPE 4110-080-RG 11 12 30 80
RPE 4120-080-RG 12 12 30 80
RPE 4130-090-RG 13 12 35 90
RPE 4140-090-RG 14 12 35 90
RPE 4150-095-RG 15 12 40 95
RPE 4160-095-RG 16 16 40 95
RPE 4170-095-RG 17 16 40 95
RPE 4180-105-RG 18 16 40 105
RPE 4190-110-RG 19 16 45 110
RPE 4200-110-RG 20 20 45 110
RPE 4210-110-RG 21 20 45 110
RPE 4220-110-RG 22 20 45 110
RPE 4230-110-RG 23 20 45 110
RPE 4240-120-RG 24 25 50 120
RPE 4250-120-RG 25 25 50 120
RPE 4260-120-RG 26 25 50 120
RPE 4270-125-RG 27 25 55 125
RPE 4280-125-RG 28 25 55 125
RPE 4300-125-RG 30 25 55 125
RPE 4320-145-RG 32 32 60 145
RPE 4340-145-RG 34 32 60 145
RPE 4350-145-RG 35 32 60 145
RPE 4360-145-RG 36 32 60 145
RPE 4380-150-RG 38 32 65 150
RPE 4400-150-RG 40 32 65 150
RPE 4420-155-RG 42 42 65 155
RPE 4440-155-RG 44 42 65 155
RPE 4450-160-RG 45 42 70 160
RPE 4460-160-RG 46 42 70 160
RPE 4500-160-RG 50 42 70 160
KORLOY
Y 227
For stainless steel machining
S-Star Endmill
t Suitable for difficult to cut material such as STS, Ti, Ni and Inconel
t New coatings with high oxidation resistance and surface hardness
t Advanced surface roughness with improved chip emission and deposition resistance
Features
t Stable high speed processing with minimum vibration, unequal index and optimal rake angle
t High processability and low vibration by applying unequal index in cutting edge
t Minimum vibration through optimized helix angle and R gash, enhanced chip emission with
stiffness supplementation
t Reduced friction resistance and improved chip emission by applying new coatings with high
surface hardness oxidation resistance
t Enhanced chipping resistance and deposition resistance with new strengthened flute
t Cutting edge
t Unequal Index / R gash
After Before
- Settled initial chipping resistance in processing

- Enhancing wear resistance and inducing stable
processing
- High chip emission through R gash shape - High quality by stabilizing cutting edge
- Stability when shouldering machining
t Additional finishing edge
t Multi-layered AlCrN coating
- Improved surface roughness by enhancing

the first O.D grinding roughness
- High quality of cutting edge and improved
- Improved lubrication through containing Cr deposition resistance
- Stability caused by frictional heat
- Securing wear resistance by enhancing t Raw-material for high performance
coating thickness
- Chipping resistance and working stability

through high performance raw-material
228 KORLOY
Tool selection guide
A-Star
Endmill
D Endmill
Composite
Router Endmill
U-Star Endmill
S-Star Super Endmill H-Star
G-Star Endmill For Ti
Endmill Super Endmill Endmill
Super Endmill For HRSA S-Star
For Ti Endmill
P K M S H N
Carbon steel, Cast iron Stainless steel Inconel718, Titanium High hardened Non-ferrous Graphite Composite
Alloy steel Waspaloy, alloy materials
Hastelloy (CFRP/GFRP)
Performance evaluation (Wear resistance) Equal or

better wear
resistance
Workpiece STS304
Cutting conditions vc (m/min) = 60, fz (mm/t) = 0.03,
ap (mm) = 9, ae (mm) = 0.6, wet

Tools SE504060 (4F Ø6 Flat Endmill)
S-Star Endmill Competitor
Code system
S R 5 1 4 120 03 H
Type Grade No. of flutes Corner radius
S : STS high 5 : Grade 2 : 2 Flute 0.1 ~ 2 mm
performance 3 : 3 Flute
4 : 4 Flute
5 : 5 Flute
Appearance 6 : 6 Flute
7 : 7 Flute
B : Ball Type
Length, Cutting dia. Helix
E : Flat Type
Shank type 1 ~ 20 mm H : High helix
R : Radius Type
F : Roughing 0 : Standard
1 : Straight, Neck
KORLOY 229
Endmill
S-Star Endmill
SE502 2 Flutes flat endmill Ø1.0 ~ 20.0 231
SR504 4 Flutes radius endmill Ø1.0 ~ 20.0 235
SR505 5 Flutes nick type radius endmill Ø6.0 ~ 20.0 236
SR507 7 Flutes nick type radius endmill Ø6.0 ~ 20.0 237
SB502 2 Flutes ball endmill Ø1.0 ~ 12.0 238
SB504 4 Flutes ball endmill Ø3.0 ~ 20.0 239
SF51H 3~5 Flutes roughing endmill Ø3.0 ~ 20.0 240
230 KORLOY
SE50
E502 t50-&3"/$&
DATA ØD Ød
CARBIDE 36 AlCrN Ø1 ~ Ø5 0 ~ -0.015mm
)&-*9 Ø6 0 ~ -0.02mm h5
Ø8 ~ Ø20 0 ~ -0.03mm
p.512

(mm)
SE502010 1 6 2.5 50
SE502012 1.2 6 3 50
SE502015 1.5 6 4 50
SE502020 2 6 6 50
SE502025 2.5 6 7 50
SE502030 3 6 8 55
SE502040 4 6 10 55
SE502050 5 6 15 55
SE502060 6 6 15 60
SE502080 8 8 20 70
SE502100 10 10 25 75
SE502120 12 12 30 80
SE502140 14 16 35 90
SE502160 16 16 42 100
SE502180 18 16 45 100
SE502200 20 20 48 100
○ ○ ○ ◎ ○ ○
KORLOY
Y 231
Endmill
S-Star Endmill
SE50
E503 t50-&3"/$&
DATA ØD Ød
CARBIDE 42 42.5 45 AlCrN Ø1 ~ Ø5 0 ~ -0.015mm
)&-*9 )&-*9 )&-*9 Ø6 0 ~ -0.02mm h5
Ø8 ~ Ø20 0 ~ -0.03mm
p.513

(mm)
SE503010 1 6 2.5 50
SE503012 1.2 6 3 50
SE503015 1.5 6 4 50
SE503020 2 6 6 50
SE503025 2.5 6 7 50
SE503030 3 6 8 55
SE50303010 3 6 10 60
SE503040 4 6 10 55
SE50304012 4 6 12 60
SE503050 5 6 13 55
SE503060 6 6 15 60
SE50306020 6 6 20 65
SE503080 8 8 20 70
SE50308030 8 8 30 80
SE503100 10 10 25 75
SE50310035 10 10 35 85
SE503120 12 12 30 80
SE50312040 12 12 40 90
SE503140 14 16 35 90
SE503160 16 16 42 100
SE503180 18 16 45 100
SE503200 20 20 48 100
○ ○ ○ ◎ ○ ○
232 KORLOY
SE50
E504 t50-&3"/$&
DATA ØD Ød
CARBIDE 35 37 AlCrN Ø1 ~ Ø5.5 0 ~ -0.015mm
)&-*9 )&-*9 Ø6 ~ Ø7 0 ~ -0.02mm h5
Ø8 ~ Ø20 0 ~ -0.03mm
p.514

(mm)
SE504010 1 6 2.5 50 SE504065 6.5 8 15 60

SE504012 1.2 6 3 50 SE504070 7 8 20 80
SE504015 1.5 6 4 50 SE504080 8 8 20 70
SE504020 2 6 6 50 SE50408025 8 8 25 70
SE504025 2.5 6 7 50 SE50408030 8 8 30 80
SE504030 3 6 8 55 SE504085 8.5 10 20 70
SE50403010 3 6 10 60 SE504090 9 10 25 80
SE504035 3.5 6 10 55 SE504100 10 10 25 75
SE504040 4 6 10 55 SE50410035 10 10 35 85
SE50404012 4 6 12 60 SE504120 12 12 30 80
SE504045 4.5 6 12 55 SE50412040 12 12 40 90
SE504050 5 6 15 55 SE504140 14 16 35 90
SE504055 5.5 6 15 60 SE504160 16 16 42 100
SE504060 6 6 15 60 SE504180 18 16 45 100
SE50406020 6 6 20 65 SE504200 20 20 48 100
○ ○ ○ ◎ ○ ○
KORLOY
Y 233
Endmill
S-Star Endmill
SE50
E506 t50-&3"/$&
DATA ØD Ød
CARBIDE 45 AlCrN Ø6 0 ~ -0.02mm
h5
)&-*9 Ø8 ~ Ø20 0 ~ -0.03mm
p.515

(mm)
SE506060 6 6 15 60
SE506080 8 8 20 70
SE506100 10 10 25 75
SE506120 12 12 30 80
SE506160 16 16 42 100
SE506200 20 20 48 100
○ ○ ○ ◎ ○ ○
234 KORLOY
SR5
R504 t50-&3"/$&
ØD Ød
DATA
Ø1 ~ Ø5 0 ~ -0.015mm
)&-*9 )&-*9 ±0.01 Ø6 ~ Ø7 0 ~ -0.02mm h5
Ø8 ~ Ø20 0 ~ -0.03mm
p.514
13°

(mm)
SR50401001 0.1 1 6 2.5 50 SR50408005 0.5 8 8 20 70

SR50401002 0.2 1 6 2.5 50 SR50408010 1 8 8 20 70
SR50401201 0.1 1.2 6 3 50 SR50410003 0.3 10 10 25 75
SR50401501 0.1 1.5 6 4 50 SR50410005 0.5 10 10 25 75
SR50401502 0.2 1.5 6 4 50 SR50410010 1 10 10 25 75
SR50402001 0.1 2 6 6 50 SR50410015 1.5 10 10 25 75
SR50402002 0.2 2 6 6 50 SR50410020 2 10 10 25 75
SR50402502 0.2 2.5 6 7 50 SR50410030 3 10 10 25 75
SR50403002 0.2 3 6 8 55 SR50412003 0.3 12 12 30 80
SR50403003 0.3 3 6 8 55 SR50412005 0.5 12 12 30 80
SR50403005 0.5 3 6 8 55 SR50412010 1 12 12 30 80
SR50404002 0.2 4 6 10 55 SR50412015 1.5 12 12 30 80
SR50404003 0.3 4 6 10 55 SR50412020 2 12 12 30 80
SR50404005 0.5 4 6 10 55 SR50412030 3 12 12 30 80
SR50405002 0.2 5 6 15 55 SR50412040 4 12 12 30 80
SR50405003 0.3 5 6 15 55 SR50414005 0.5 14 16 35 90
SR50405005 0.5 5 6 15 55 SR50414010 1 14 16 35 90
SR50406003 0.3 6 6 15 60 SR50416005 0.5 16 16 42 100
SR50406005 0.5 6 6 15 60 SR50416010 1 16 16 42 100
SR50406010 1 6 6 15 60 SR50418005 0.5 18 16 45 100
SR50407003 0.3 7 8 15 60 SR50420005 0.5 20 20 48 100
SR50408002 0.2 8 8 20 70 SR50420010 1 20 20 48 100
SR50408003 0.3 8 8 20 70
○ ○ ○ ◎ ○ ○
KORLOY
Y 235
Endmill
S-Star Endmill
SR5
R505 5 Flutes nick type radius endmill
t50-&3"/$&
ØD Ød
35 38 R DATA
CARBIDE 5 ±0.01
AlCrN Ø6 0 ~ -0.02mm
h5
)&-*9 )&-*9 Ø8 ~ Ø20 0 ~ -0.03mm
p.516

(mm)
SR50506005 0.5 6 6 15 60
SR50508005 0.5 8 8 20 70
SR50510005 0.5 10 10 25 75
SR50512005 0.5 12 12 30 80
SR50516005 0.5 16 16 42 100
SR50520005 0.5 20 20 48 100
○ ○ ○ ◎ ○ ○
236 KORLOY
SR5
R507 7 Flutes nick type radius endmill
t50-&3"/$&
ØD Ød
38 R DATA
CARBIDE 7 AlCrN Ø6 0 ~ -0.02mm
h5
)&-*9 ±0.01 Ø8 ~ Ø20 0 ~ -0.03mm
p.516

(mm)
SR50706005 0.5 6 6 15 60
SR50708005 0.5 8 8 20 70
SR50710005 0.5 10 10 25 75
SR50712005 0.5 12 12 30 80
SR50716005 0.5 16 16 42 100
SR50720005 0.5 20 20 48 100
○ ○ ○ ◎ ○ ○
KORLOY
Y 237
Endmill
S-Star Endmill
SB5
B502 t50-&3"/$&
ØD Ød
CARBIDE 38 R AlCrN
DATA
Ø1 ~ Ø5 0 ~ -0.015mm
)&-*9 ±0.01 Ø6 0 ~ -0.02mm h5
Ø8 ~ Ø20 0 ~ -0.03mm
p.516

(mm)
SB502010 0.5 1 6 3 50
SB502020 1 2 6 6 50
SB502030 1.5 3 6 8 50
SB502030L 1.5 3 6 8 70
SB502040 2 4 6 10 50
SB502040L 2 4 6 10 70
SB502050 2.5 5 6 13 50
SB502050L 2.5 5 6 13 80
SB502060 3 6 6 13 50
SB502060L 3 6 6 13 90
SB502080 4 8 8 19 60
SB502080L 4 8 8 19 100
SB502100 5 10 10 22 70
SB502100L 5 10 10 22 100
SB502120 6 12 12 26 75
SB502120L 6 12 12 26 110
○ ○ ○ ◎ ○ ○
238 KORLOY
SB5
B504 t50-&3"/$&
ØD Ød
DATA
Ø1 ~ Ø5 0 ~ -0.015mm
)&-*9 )&-*9 ±0.01 Ø6 ~ Ø7 0 ~ -0.02mm h5
Ø8 ~ Ø20 0 ~ -0.03mm
p.517

(mm)
SB504030 1.5 3 6 8 60
SB504040 2 4 6 8 70
SB504050 2.5 5 6 12 80
SB504060 3 6 6 12 90
SB504080 4 8 8 16 100
SB504100 5 10 10 20 100
SB504120 6 12 12 25 100
SB504160 8 16 16 30 100
SB504200 10 20 20 38 100
○ ○ ○ ◎ ○ ○
KORLOY
Y 239
Endmill
S-Star Endmill
SF51
F51H 3~5 Flutes roughing endmill
t50-&3"/$&
DATA ØD Ød
45
CARBIDE 3~5 AlCrN Ø3 ~ Ø20 0 ~ -0.05mm h5
)&-*9
p.518
13°

(mm)
Designation C ØD Ød ℓ1 ℓ2 L z
SF51303002H 0.2 3 6 8 - 50 3
SF51304002H 0.2 4 6 10 - 50 3
SF51405002H 0.3 5 6 13 - 50 4
SF51406002H 0.3 6 6 13 - 60 4
SF51406002NH 0.3 6 6 10 20 60 4
SF51407002H 0.4 7 8 18 - 70 4
SF51408002H 0.4 8 8 19 - 70 4
SF51408002NH 0.4 8 8 12 25 70 4
SF51409003H 0.4 9 10 20 - 70 4
SF51410003H 0.4 10 10 22 - 75 4
SF51410003NH 0.4 10 10 15 30 75 4
SF51411003H 0.5 11 12 25 - 80 4
SF51412003H 0.5 12 12 26 - 80 4
SF51412003NH 0.5 12 12 20 35 80 4
SF51506002H 0.3 6 6 13 - 60 5
SF51508002H 0.4 8 8 19 - 65 5
SF51510003H 0.4 10 10 22 - 70 5
SF51512003H 0.5 12 12 26 - 80 5
SF51514005H 0.5 14 16 28 - 90 5
SF51516005H 0.5 16 16 32 - 100 5
SF5151600542H 0.5 16 16 42 - 100 5
SF51520005H 0.5 20 20 38 - 100 5
SF5152000545H 0.5 20 20 45 - 100 5
○ ○ ○ ◎ ○ ○
240 KORLOY
Endmill series for aluminum machining
A-Star Endmill
t Suitable for Aluminum, aluminum alloy and non-ferrous materials.
t Various specifications in the line such as Ball, single flute and roughing etc. for wide range in machining.
Features
t Sharp cutting edge considered the characteristics of workpiece
t High deposition resistance and enhanced chip emission through the surface of a mirror in the groove.
Applications
[ Case Study ]
Acryl
Tool life
40 30%
longer
Aluminum Aluminum 30
Alloy
A-Star 20
Endmill
10
Alloy Non-ferrous
Steel materials
0
A-Star Endmill Competitor
Copper
Code system
WA R 3 0 3 14 10
A-Star Endmill Grade No. of flutes Corner radius
3 : NON Coating 1 : 1 Flutes 0.05 ~ 5 mm
5 : D.L.C Coating 2 : 2 Flutes
Length, 3 : 3 Flutes
Appearance Shank type Cutting dia.
B : Ball 0 : Stub Length 0.2 ~ 25 mm
E : Flat 1 : Regula Length
R : Radius 2 : Long Length
F : Roughing
KORLOY
Y 241
Endmill
A-Star Endmill
WAB312 2 Flutes ball nose endmill Ø6.0 ~ 20.0 243
WAE301 1 Flutes flat endmill Ø0.2 ~ 12.0 244
WAE302 2 Flutes flat endmill Ø1.0 ~ 25.0 245
WAE30(2)3 3 Flutes flat endmill Ø1.0 ~ 25.0 246~247
WAR302 2 Flutes radius endmill Ø6.0 ~ 20.0 248
WAF303 3 Flutes roughing endmill Ø6.0 ~ 20.0 252
242 KORLOY
WAB312
WAB 2 Flutes ball nose endmill
t50-&3"/$&
ØD Ød
FINE 50 R Un- DATA
GRAIN )&-*9 ±0.02 coated All sizes ±0.02mm h6
All sizes p.519
13°
1
R 2
(mm)
WAB312 060 3 6 6 5.5 25 55

WAB312 061 3 6 6 5.5 40 90
WAB312 080 4 8 8 7 30 65
WAB312 081 4 8 8 7 50 100
WAB312 100 5 10 10 8.5 35 75
WAB312 101 5 10 10 10 50 100
WAB312 102 5 10 10 10 60 150
WAB312 120 6 12 12 10.5 40 75
WAB312 121 6 12 12 12 50 110
WAB312 122 6 12 12 12 60 150
WAB312 160 8 16 16 14 50 90
WAB312 161 8 16 16 16 70 150
WAB312 162 8 16 16 16 90 200
WAB312 200 10 20 20 17 50 100
○ ◎
○: GOOD ◎: EXCELLENT
KORLOY
Y 243
Endmill
A-Star Endmill
WAE301
WAE t50-&3"/$&
DATA ØD Ød
FINE 30 Un- Ø0.2 ~ Ø5 0 ~ -0.02mm
GRAIN )&-*9 coated h5
Ø6 ~ Ø12 0 ~ -0.03mm
p.519
13°
(mm)
WAE301 002 0.2 4 0.3 40 WAE301 025-8 2.5 6 8 50

WAE301 003 0.3 4 0.9 40 WAE301 025-10 2.5 6 10 50
WAE301 004 0.4 4 1.2 40 WAE301 025-12 2.5 6 12 50
WAE301 005 0.5 4 1.5 40 WAE301 030 3 6 8 50
WAE301 006 0.6 4 1.8 40 WAE301 030-12 3 6 12 50
WAE301 007 0.7 4 2.1 40 WAE301 030-15 3 6 15 50
WAE301 008 0.8 4 2.4 40 WAE301 040 4 6 10 50
WAE301 009 0.9 4 2.7 40 WAE301 040-15 4 6 15 50
WAE301 010 1 6 3 45 WAE301 040-20 4 6 20 60
WAE301 010-4.5 1 6 4.5 45 WAE301 050 5 6 13 60
WAE301 010-6 1 6 6 50 WAE301 050-20 5 6 20 60
WAE301 012 1.2 6 3 45 WAE301 050-25 5 6 25 60
WAE301 012-5 1.2 6 5 45 WAE301 060 6 6 15 60
WAE301 012-6 1.2 6 6 50 WAE301 060-20 6 6 20 60
WAE301 015 1.5 6 4 45 WAE301 060-25 6 6 25 60
WAE301 015-6 1.5 6 6 50 WAE301 080 8 8 20 70
WAE301 015-8 1.5 6 8 50 WAE301 080-25 8 8 25 75
WAE301 020 2 6 6 50 WAE301 100 10 10 22 75
WAE301 020-8 2 6 8 50 WAE301 100-30 10 10 30 80
WAE301 020-10 2 6 10 50 WAE301 120 12 12 26 75
WAE301 025 2.5 6 7 50 WAE301 120-35 12 12 35 90
○ ◎
244 KORLOY
WAE302
WAE t50-&3"/$&
DATA ØD Ød
FINE 45 Un-
SHARP
GRAIN )&-*9 EDGE
coated All sizes 0 ~ -0.02mm h6
p.520
13°
(mm)
WAE302 010 1 4 3 50 WAE302 080 8 8 23 70

WAE302 010-6 1 6 6 60 WAE302 080-31 8 8 31 80
WAE302 012 1.2 6 4 50 WAE302 090 9 10 25 72
WAE302 015 1.5 6 6 50 WAE302 100 10 10 28 75
WAE302 015-8 1.5 6 8 60 WAE302 100-36 10 10 36 90
WAE302 020 S4 2 4 6 50 WAE302 110 11 12 30 80
WAE302 020 2 6 6 50 WAE302 120 12 12 33 80
WAE302 020-10 2 6 10 60 WAE302 120-41 12 12 41 95
WAE302 025 2.5 6 12 55 WAE302 122 12 12 45 100
WAE302 030 3 6 12 55 WAE302 130 13 14 35 85
WAE302 030-15 3 6 15 65 WAE302 140 14 14 38 90
WAE302 035 3.5 6 14 57 WAE302 150 15 16 40 90
WAE302 040 4 6 14 55 WAE302 160 16 16 45 100
WAE302 040-16 4 6 16 65 WAE302 160-53 16 16 53 110
WAE302 050 5 6 17 55 WAE302 180 18 18 49 100
WAE302 050-22 5 6 22 60 WAE302 200 20 20 50 100
WAE302 060 6 6 17 60 WAE302 200-55 20 20 55 110
WAE302 060-22 6 6 22 60 WAE302 250 25 25 50 120
WAE302 070 7 8 20 63
○ ◎
KORLOY
Y 245
Endmill
A-Star Endmill
WAE30(2)3
WAE t50-&3"/$&
DATA ØD Ød
FINE 45 Un-
SHARP
GRAIN )&-*9 EDGE
p.521
(mm)
WAE303 010-02 1 6 2 40 WAE303 050 5 6 17 55

WAE303 010-025 1 6 2.5 40 WAE303 051 5 6 22 60
WAE303 010 1 6 3 50 WAE303 052 5 6 26 70
WAE303 010-04 1 6 4 60 WAE323 050 5 6 31 75
WAE303 010-06 1 6 6 60 WAE323 051 5 6 36 80
WAE303 012 1.2 6 4 50 WAE323 052 5 6 41 85
WAE303 015-03 1.5 6 3 40 WAE323 053 5 6 46 90
WAE303 015 1.5 6 5 50 WAE303 055 5.5 6 17 55
WAE303 015-06 1.5 6 6 60 WAE303 060-07 6 6 7 50
WAE303 015-08 1.5 6 8 60 WAE303 060-13 6 6 13 50
WAE303 015-10 1.5 6 10 60 WAE303 060 6 6 17 60
WAE303 020-03 2 6 3 40 WAE303 061 6 6 22 60
WAE303 020 2 6 6 50 WAE303 062 6 6 26 70
WAE303 020-08 2 6 8 60 WAE303 063 6 6 31 75
WAE303 020-10 2 6 10 60 WAE323 060 6 6 36 80
WAE303 020-12 2 6 12 60 WAE323 061 6 6 43 90
WAE303 025 2.5 6 8 40 WAE323 062 6 6 51 100
WAE303 025-10 2.5 6 10 55 WAE303 070 7 8 23 65
WAE303 025-12 2.5 6 12 60 WAE303 080-10 8 8 10 60
WAE303 030-04 3 6 4 45 WAE303 080-20 8 8 20 60
WAE303 030-08 3 6 8 45 WAE303 080 8 8 23 70
WAE303 030 3 6 12 55 WAE303 080-29 8 8 29 80
WAE303 031 3 6 15 65 WAE303 081 8 8 31 80
WAE323 030 3 6 20 70 WAE303 082 8 8 36 85
WAE323 031 3 6 25 75 WAE323 080 8 8 41 90
WAE323 032 3 6 30 80 WAE323 081 8 8 46 95
WAE303 035 3.5 6 12 55 WAE323 082 8 8 51 100
WAE303 040-05 4 6 5 45 WAE323 083 8 8 56 105
WAE303 040-08 4 6 8 45 WAE323 084 8 8 66 110
WAE303 040-11 4 6 11 45 WAE303 090 9 10 28 70
WAE303 040 4 6 14 55 WAE303 100-12 10 10 12 65
WAE303 040-16 4 6 16 65 WAE303 100-23 10 10 23 65
WAE303 041 4 6 20 70 WAE303 100 10 10 28 75
WAE323 040 4 6 26 75 WAE303 100-33 10 10 33 90
WAE323 041 4 6 30 80 WAE303 101 10 10 36 90
WAE303 045 4.5 6 15 55 WAE303 100-41 10 10 41 90
WAE303 050-06 5 6 6 45 WAE303 102 10 10 46 100
246 KORLOY
WAE30(2)3
WAE t50-&3"/$&
DATA ØD Ød
FINE 45 Un-
SHARP
GRAIN )&-*9 EDGE
p.521
(mm)
WAE303 103 10 10 51 100 WAE303 160-53 16 16 53 105

WAE323 100 10 10 56 110 WAE303 161 16 16 56 110
WAE323 100-61 10 10 61 110 WAE303 162 16 16 66 130
WAE323 101 10 10 66 120 WAE303 163 16 16 76 150
WAE303 110 11 12 30 80 WAE323 160 16 16 86 160
WAE303 120-14 12 12 14 70 WAE323 161 16 16 96 180
WAE303 120-27 12 12 27 70 WAE323 162 16 16 106 190
WAE303 120 12 12 33 80 WAE323 163 16 16 116 200
WAE303 121 12 12 41 95 WAE303 180 18 18 49 100
WAE303 122 12 12 46 100 WAE303 200-23 20 20 23 90
WAE303 122-51 12 12 51 100 WAE303 200-39 20 20 39 90
WAE303 123 12 12 56 110 WAE303 200 20 20 50 100
WAE303 124-61 12 12 61 110 WAE303 201 20 20 60 110
WAE323 120 12 12 66 120 WAE303 202 20 20 70 130
WAE323 120-71 12 12 71 120 WAE303 203 20 20 76 150
WAE323 121 12 12 76 135 WAE323 200 20 20 86 160
WAE303 130 13 14 35 85 WAE323 201 20 20 96 180
WAE303 140 14 14 38 90 WAE323 202 20 20 106 190
WAE303 150 15 16 40 90 WAE323 203 20 20 116 200
WAE303 160-19 16 16 19 90 WAE323 204 20 20 126 220
WAE303 160-33 16 16 33 90 WAE303 250 25 25 50 120
WAE303 160 16 16 45 100
○ ◎
KORLOY
Y 247
Endmill
WAR302
WAR 2 Flutes radius endmill
t50-&3"/$&
DATA ØD Ød
FINE 45 R Un-
GRAIN )&-*9 ±0.015 coated All sizes 0 ~ -0.02mm h6
All sizes p.521
(mm)
WAR302 06 05 0.5 6 6 15 50 WAR302 12 30 3 12 12 30 75

WAR302 06 10 1 6 6 15 50 WAR302 12 40 4 12 12 30 75
WAR302 06 15 1.5 6 6 15 50 WAR302 14 10 1 14 14 35 80
WAR302 06 20 2 6 6 15 50 WAR302 14 20 2 14 14 35 80
WAR302 08 05 0.5 8 8 20 60 WAR302 14 30 3 14 14 35 80
WAR302 08 10 1 8 8 20 60 WAR302 14 40 4 14 14 35 80
WAR302 08 15 1.5 8 8 20 60 WAR302 14 50 5 14 14 35 80
WAR302 08 20 2 8 8 20 60 WAR302 16 10 1 16 16 40 90
WAR302 08 30 3 8 8 20 60 WAR302 16 20 2 16 16 40 90
WAR302 10 05 0.5 10 10 25 70 WAR302 16 30 3 16 16 40 90
WAR302 10 10 1 10 10 25 70 WAR302 16 40 4 16 16 40 90
WAR302 10 15 1.5 10 10 25 70 WAR302 16 50 5 16 16 40 90
WAR302 10 20 2 10 10 25 70 WAR302 20 10 1 20 20 45 100
WAR302 10 30 3 10 10 25 70 WAR302 20 20 2 20 20 45 100
WAR302 10 40 4 10 10 25 70 WAR302 20 30 3 20 20 45 100
WAR302 12 10 1 12 12 30 75 WAR302 20 40 4 20 20 45 100
WAR302 12 20 2 12 12 30 75 WAR302 20 50 5 20 20 45 100
○ ◎
248 KORLOY
WAR303
t50-&3"/$&
DATA ØD Ød
FINE 45 R Un-
GRAIN )&-*9 ±0.015 coated All sizes 0 ~ -0.02mm h6
All sizes p.521
(mm)
WAR303 06 05 0.5 6 6 15 50 WAR303 12 40 4 12 12 30 75

WAR303 06 10 1 6 6 15 50 WAR303 14 10 1 14 14 35 80
WAR303 06 15 1.5 6 6 15 50 WAR303 14 20 2 14 14 35 80
WAR303 06 20 2 6 6 15 50 WAR303 14 30 3 14 14 35 80
WAR303 08 05 0.5 8 8 20 60 WAR303 14 40 4 14 14 35 80
WAR303 08 10 1 8 8 20 60 WAR303 14 50 5 14 14 35 80
WAR303 08 15 1.5 8 8 20 60 WAR303 16 10 1 16 16 40 90
WAR303 08 20 2 8 8 20 60 WAR303 16 20 2 16 16 40 90
WAR303 10 05 0.5 10 10 25 70 WAR303 16 30 3 16 16 40 90
WAR303 10 10 1 10 10 25 70 WAR303 16 40 4 16 16 40 90
WAR303 10 15 1.5 10 10 25 70 WAR303 16 50 5 16 16 40 90
WAR303 10 20 2 10 10 25 70 WAR303 20 10 1 20 20 45 100
WAR303 10 30 3 10 10 25 70 WAR303 20 20 2 20 20 45 100
WAR303 10 40 4 10 10 25 70 WAR303 20 30 3 20 20 45 100
WAR303 12 10 1 12 12 30 75 WAR303 20 40 4 20 20 45 100
WAR303 12 20 2 12 12 30 75 WAR303 20 50 5 20 20 45 100
WAR303 12 30 3 12 12 30 75
○ ◎
KORLOY
Y 249
Endmill
A-Star Endmill
WAR502
WAR t50-&3"/$&
DATA ØD Ød
FINE 45 R
GRAIN )&-*9 ±0.015 %-$
All sizes p.523
13°
(mm)
WAR502 010 0.05 1 6 3 40

WAR502 015 0.05 1.5 6 5 40
WAR502 020 0.1 2 6 6 40
WAR502 021 0.1 2 6 12 50
WAR502 030 0.1 3 6 10 50
WAR502 031 0.1 3 6 20 60
WAR502 040 0.1 4 6 12 50
WAR502 041 0.1 4 6 20 60
WAR502 050 0.1 5 6 15 57
WAR502 060 0.1 6 6 15 57
WAR502 061 0.1 6 6 22 65
WAR502 070 0.1 7 8 20 63
WAR502 080 0.1 8 8 20 63
WAR502 081 0.1 8 8 28 70
WAR502 090 0.1 9 10 25 72
WAR502 100 0.2 10 10 28 72
WAR502 101 0.2 10 10 32 80
WAR502 110 0.2 11 12 30 80
WAR502 120 0.2 12 12 32 80
WAR502 121 0.2 12 12 40 100
○ ◎
250 KORLOY
WAR503
t50-&3"/$&
DATA ØD Ød
FINE 45 R
GRAIN )&-*9 ±0.015 %-$
All sizes p.524~525
(mm)
WAR503 040 0.5 4 6 14 57

WAR503 041 1 4 6 25 62
WAR503 060 0.5 6 6 16 57
WAR503 061 1 6 6 25 62
WAR503 080 0.5 8 8 22 63
WAR503 081 1 8 8 35 80
WAR503 100 0.5 10 10 28 72
WAR503 101 1 10 10 45 100
WAR503 120 0.5 12 12 32 80
WAR503 121 1 12 12 45 100
WAR503 160 0.5 16 16 45 90
WAR503 161 1 16 16 65 125
WAR503 200 0.5 20 20 50 100
WAR503 201 1 20 20 70 130
○ ◎
KORLOY
Y 251
Endmill
A-Star Endmill
WAF303
WAF 3 Flutes roughing endmill
t50-&3"/$&
ØD Ød
FINE 38 Un- DATA Ø4 ~ Ø6 0 ~ -0.048mm
GRAIN COARSE
DIN DIN
coated Ø7 ~ Ø10 0 ~ -0.058mm
)&-*9 h6
6535HA 6535HB Ø12 ~ Ø18 0 ~ -0.07mm
Conventional p.526 Ø20 ~ 0 ~ -0.084mm
Pitch
13°
(mm)
WAF303 040 4 6 10 55
WAF303 050 5 6 15 55
WAF303 060 6 6 16 60
WAF303 061 6 6 25 80
WAF303 070 7 8 16 63
WAF303 080 8 8 20 65
WAF303 081 8 8 30 90
WAF303 090 9 10 19 72
WAF303 100 10 10 25 75
WAF303 101 10 10 40 100
WAF303 120 12 12 30 80
WAF303 121 12 12 50 110
WAF303 140 14 14 35 90
WAF303 160 16 16 42 100
WAF303 161 16 16 52 150
WAF303 162 16 16 65 125
WAF303 180 18 18 32 92
WAF303 200 20 20 38 104
WAF303 201 20 20 55 160
٘ Flat shank is available upon request ٘ The above specifications are subject to change without prior notice for product quality improvement.
ex) WAF303100F: Flat shank
○ ◎
252 KORLOY
Diamond coated endmill
D Endmill
t Tangential cutting-edge geometries for excellent surface finish
t Excellent wear resistance due to high hardness and high purity diamond coating
t Advanced surface finish and cutting performance thanks to sharp edges and tangential tool geometries
Features
t Tangential cutting-edge geometries
- One-Pass grinding system
- Prevents stepped cone on the machined surface
- 2-flutes and 4-flutes tooling with a ball nose
t Center-matched ball shape (4-flutes)

- Ball point shape for high feed machining
- Improved rigidity and excellent surface finish
[ Test result ]
Workpiece Graphite mold
20% longer
tool life
Cutting conditions vc (m/min) = 100, fz (mm/t) = 0.11
8
ap (mm) = 0.26, dry 6.5
Tools DBE4060-110-N250S06
D Endmill Competitor
[ Test result ]
25% longer
tool life
10
ap (mm) = 0.2, dry 8
[ Test result ]
Cutting conditions vc (m/min) = 300, fz (mm/t) = 0.1 25% longer

tool life
ap (mm) = 0.15, dry 6 5
KORLOY
Y 253
Endmill
D Endmill
DFE2000 (Flat)
DFE t50-&3"/$&
30 ~ Ø5.9 0 ~ -0.02mm
ND3000 h6
)&-*9 Ø6.0 ~ 0 ~ -0.03mm
p.527
(mm)
DFE2002-045-N004S04 0.2 4 0.4 - 45 DFE2020-080-N250S04 2 4 6 25 80

DFE2003-045-N006S04 0.3 4 0.6 - 45 DFE2020-080-N300S04 2 4 6 30 80
DFE2004-045-N008S04 0.4 4 0.8 - 45 DFE2020-080-N400S04 2 4 6 40 80
DFE2005-045-N010S04 0.5 4 1 - 45 DFE2030-050-N100S06 3 6 9 10 50
DFE2006-045-N012S04 0.6 4 1.2 - 45 DFE2030-080-N100S04 3 4 9 10 80
DFE2007-045-N015S04 0.7 4 1.5 - 45 DFE2030-080-N120S04 3 4 9 12 80
DFE2008-045-N020S04 0.8 4 2 - 45 DFE2030-080-N200S04 3 4 9 20 80
DFE2009-045-N025S04 0.9 4 2.5 - 45 DFE2030-080-N250S04 3 4 9 25 80
DFE2010-045-N030S04 1 4 3 - 45 DFE2030-080-N300S04 3 4 9 30 80
DFE2010-045-N050S04 1 4 3 5 45 DFE2030-080-N400S04 3 4 9 40 80
DFE2010-060-N050S04 1 4 3 5 60 DFE2040-050-N120S06 4 6 12 - 50
DFE2010-060-N100S04 1 4 3 10 60 DFE2040-050-N160S06 4 6 12 16 50
DFE2010-060-N150S04 1 4 3 15 60 DFE2040-080-N160S04 4 4 12 16 80
DFE2010-060-N200S04 1 4 3 20 60 DFE2050-060-N150S06 5 6 15 - 60
DFE2010-060-N250S04 1 4 3 25 60 DFE2050-060-N200S06 5 6 15 20 60
DFE2015-060-N050S04 1.5 4 4 5 60 DFE2050-110-N200S06 5 6 15 20 110
DFE2015-060-N060S04 1.5 4 4 6 60 DFE2060-060-N180S06 6 6 18 - 60
DFE2015-060-N100S04 1.5 4 4 10 60 DFE2060-110-N250S06 6 6 18 25 110
DFE2015-060-N150S04 1.5 4 4 15 60 DFE2060-150-N250S06 6 6 18 25 150
DFE2015-060-N200S04 1.5 4 4 20 60 DFE2080-070-N250S08 8 8 25 - 70
DFE2015-060-N250S04 1.5 4 4 25 60 DFE2080-150-N400S08 8 8 25 40 150
DFE2020-045-N060S04 2 4 6 - 45 DFE2100-080-N300S10 10 10 30 - 80
DFE2020-045-N080S04 2 4 6 8 45 DFE2100-150-N500S10 10 10 30 50 150
DFE2020-080-N080S04 2 4 6 8 80 DFE2100-160-N500S10 10 10 30 50 160
DFE2020-080-N100S04 2 4 6 10 80 DFE2120-080-N250S12 12 12 25 - 80
DFE2020-080-N120S04 2 4 6 12 80 DFE2120-080-N350S12 12 12 35 - 80
DFE2020-080-N150S04 2 4 6 15 80 DFE2120-150-N600S12 12 12 35 60 150
DFE2020-080-N200S04 2 4 6 20 80 DFE2120-160-N600S12 12 12 35 60 160
254 KORLOY
DFE4000 (Flat)
DFE t50-&3"/$&
30 ~ Ø5.9 0 ~ -0.02mm
ND3000 h6
)&-*9 Ø6.0 ~ 0 ~ -0.03mm
p.527
(mm)
4020-045-N060S04 2 4 6 8 45
4020-060-N100S04 2 4 10 12 60
4030-050-N100S06 3 6 10 12 50
4030-060-N150S03 3 3 15 - 60
4030-060-N150S04 3 4 15 18 60
4040-050-N120S06 4 6 12 - 50
4040-050-N150S06 4 6 15 18 50
4040-080-N200S04 4 4 20 - 80
4060-060-N180S06 6 6 18 - 60
4060-110-N300S06 6 6 30 - 110
4060-150-N300S06 6 6 30 - 150
4080-070-N250S08 8 8 25 - 70
4080-110-N400S08 8 8 40 - 110
4080-150-N400S08 8 8 40 - 150
4100-080-N250S10 10 10 25 - 80
4100-110-N400S10 10 10 40 - 110
4100-150-N500S10 10 10 50 - 150
4120-080-N300S12 12 12 30 - 80
4120-110-N400S12 12 12 40 - 110
4120-110-N450S12 12 12 45 - 110
4120-150-N500S12 12 12 50 - 150
4120-150-N550S12 12 12 55 - 150
KORLOY
Y 255
Endmill
D Endmill
DRE2000 (Radius)
DRE t50-&3"/$&
30 ~ Ø5.9 0 ~ -0.02mm
ND3000 h6
)&-*9 Ø6.0 ~ 0 ~ -0.03mm
p.527
1

2
(mm)
DRE2005-060-N050S04-R005 0.05 0.5 4 1 5 60

DRE2005-060-N080S04-R005 0.05 0.5 4 1 8 60
DRE2005-060-N100S04-R005 0.05 0.5 4 1 10 60
DRE2006-060-N060S04-R005 0.05 0.6 4 1.2 6 60
DRE2006-060-N090S04-R005 0.05 0.6 4 1.2 9 60
DRE2006-060-N120S04-R005 0.05 0.6 4 1.2 12 60
DRE2008-060-N040S04-R005 0.05 0.8 4 1.6 4 60
DRE2008-060-N080S04-R005 0.05 0.8 4 1.6 8 60
DRE2008-060-N100S04-R005 0.05 0.8 4 1.6 10 60
DRE2010-060-N050S04-R005 0.05 1 4 2 5 60
DRE2010-060-N100S04-R005 0.05 1 4 2 10 60
DRE2010-060-N100S04-R02 0.2 1 4 2 10 60
DRE2010-060-N150S04-R02 0.2 1 4 2 15 60
DRE2010-060-N200S04-R005 0.05 1 4 2 20 60
DRE2010-060-N200S04-R02 0.2 1 4 2 20 60
DRE2015-060-N050S04-R005 0.05 1.5 4 3 5 60
DRE2015-060-N100S04-R005 0.05 1.5 4 3 10 60
DRE2015-060-N150S04-R005 0.05 1.5 4 3 15 60
DRE2015-060-N150S04-R02 0.2 1.5 4 3 15 60
DRE2015-060-N200S04-R005 0.05 1.5 4 3 20 60
DRE2015-060-N200S04-R02 0.2 1.5 4 3 20 60
DRE2020-060-N120S04-R02 0.2 2 4 3.5 12 60
DRE2020-060-N120S04-R03 0.3 2 4 3.5 12 60
DRE2020-060-N180S04-R03 0.3 2 4 3.5 18 60
DRE2020-060-N250S04-R02 0.2 2 4 3.5 25 60
DRE2020-060-N250S04-R03 0.3 2 4 3.5 25 60
DRE2020-060-N300S04-R02 0.2 2 4 3.5 30 60
DRE2020-060-N300S04-R03 0.3 2 4 3.5 30 60
DRE2030-080-N100S04-R02 0.2 3 4 4 10 80
DRE2030-080-N200S04-R02 0.2 3 4 4 20 80
DRE2030-080-N200S04-R03 0.3 3 4 4 20 80
DRE2030-080-N300S04-R02 0.2 3 4 4 30 80
DRE2030-080-N400S04-R02 0.2 3 4 4 40 80
DRE2030-080-N400S04-R03 0.3 3 4 4 40 80
256 KORLOY
DRE4000 (Radius)
DRE t50-&3"/$&
30 ~ Ø5.9 0 ~ -0.02mm
ND3000 h6
)&-*9 Ø6.0 ~ 0 ~ -0.03mm
p.527
1

2
(mm)
DRE4020-060-N120S04-R03 0.3 2 4 3.5 12 60

DRE4020-060-N180S04-R02 0.2 2 4 3.5 18 60
DRE4020-060-N180S04-R03 0.3 2 4 3.5 18 60
DRE4020-060-N250S04-R02 0.2 2 4 3.5 25 60
DRE4020-060-N250S04-R03 0.3 2 4 3.5 25 60
DRE4020-060-N300S04-R02 0.2 2 4 3.5 30 60
DRE4020-060-N300S04-R03 0.3 2 4 3.5 30 60
DRE4030-080-N100S04-R05 0.5 3 4 4 10 80
DRE4030-080-N200S04-R03 0.3 3 4 4 20 80
DRE4030-080-N200S04-R05 0.5 3 4 4 20 80
DRE4030-080-N300S04-R03 0.3 3 4 4 30 80
DRE4030-080-N300S04-R05 0.5 3 4 4 30 80
DRE4030-080-N400S04-R03 0.3 3 4 4 40 80
DRE4030-080-N400S04-R05 0.5 3 4 4 40 80
DRE4040-100-N200S04-R03 0.3 4 4 6 20 100
DRE4060-110-N250S06-R03 0.3 6 6 9 25 110
DRE4060-110-N250S06-R05 0.5 6 6 9 25 110
DRE4060-150-N300S06-R05 0.5 6 6 9 30 150
DRE4080-110-N300S08-R03 0.3 8 8 12 30 110
DRE4080-110-N300S08-R05 0.5 8 8 12 30 110
DRE4080-150-N400S08-R05 0.5 8 8 12 40 150
DRE4100-110-N350S10-R05 0.5 10 10 15 35 110
DRE4100-160-N450S10-R05 0.5 10 10 15 45 160
DRE4120-110-N400S12-R05 0.5 12 12 18 40 110
DRE4120-160-N450S12-R05 0.5 12 12 18 45 160
KORLOY
Y 257
Endmill
D Endmill
DBE2000 (Ball)
DBE t50-&3"/$&
30 ~ Ø5.9 0 ~ -0.02mm
ND3000 h6
)&-*9 Ø6.0 ~ 0 ~ -0.03mm
p.527
R 2
(mm)
DBE2003-045-N012S04 0.15 0.3 4 1.2 - 45 DBE2010-080-N350S04 0.5 1 4 3 35 80

DBE2003-045-N020S04 0.15 0.3 4 1.2 2 45 DBE2010-080-N400S04 0.5 1 4 3 40 80
DBE2004-045-N015S04 0.2 0.4 4 1.5 - 45 DBE2015-060-N050S04 0.75 1.5 4 4 5 60
DBE2004-045-N020S04 0.2 0.4 4 1.5 2 45 DBE2015-060-N080S04 0.75 1.5 4 4 8 60
DBE2004-045-N030S04 0.2 0.4 4 1.5 3 45 DBE2015-080-N100S04 0.75 1.5 4 4 10 80
DBE2004-045-N040S04 0.2 0.4 4 1.5 4 45 DBE2015-080-N120S04 0.75 1.5 4 4 12 80
DBE2004-045-N050S04 0.2 0.4 4 1.5 5 45 DBE2015-080-N150S04 0.75 1.5 4 4 15 80
DBE2005-045-N020S04 0.25 0.5 4 2 - 45 DBE2015-080-N180S04 0.75 1.5 4 4 18 80
DBE2005-045-N030S04 0.25 0.5 4 2 3 45 DBE2015-080-N200S04 0.75 1.5 4 4 20 80
DBE2005-045-N040S04 0.25 0.5 4 2 4 45 DBE2015-080-N250S04 0.75 1.5 4 4 25 80
DBE2005-045-N050S04 0.25 0.5 4 2 5 45 DBE2015-080-N300S04 0.75 1.5 4 4 30 80
DBE2005-045-N060S04 0.25 0.5 4 2 6 45 DBE2015-080-N350S04 0.75 1.5 4 4 35 80
DBE2006-045-N020S04 0.3 0.6 4 2 2 45 DBE2015-080-N400S04 0.75 1.5 4 4 40 80
DBE2006-045-N030S04 0.3 0.6 4 2 3 45 DBE2020-060-N060S04 1 2 4 6 - 60
DBE2006-045-N040S04 0.3 0.6 4 2 4 45 DBE2020-060-N080S04 1 2 4 6 8 60
DBE2006-045-N050S04 0.3 0.6 4 2 5 45 DBE2020-080-N100S04 1 2 4 6 10 80
DBE2006-045-N060S04 0.3 0.6 4 2 6 45 DBE2020-080-N150S04 1 2 4 6 15 80
DBE2006-045-N080S04 0.3 0.6 4 2 8 45 DBE2020-080-N200S04 1 2 4 6 20 80
DBE2006-045-N100S04 0.3 0.6 4 2 10 45 DBE2020-080-N250S04 1 2 4 6 25 80
DBE2008-045-N030S04 0.4 0.8 4 2.5 3 45 DBE2020-080-N300S04 1 2 4 6 30 80
DBE2008-045-N040S04 0.4 0.8 4 2.5 4 45 DBE2020-080-N350S04 1 2 4 6 35 80
DBE2008-045-N050S04 0.4 0.8 4 2.5 5 45 DBE2020-100-N400S04 1 2 4 6 40 100
DBE2008-045-N060S04 0.4 0.8 4 2.5 6 45 DBE2020-100-N450S04 1 2 4 6 45 100
DBE2008-045-N080S04 0.4 0.8 4 2.5 8 45 DBE2020-100-N500S04 1 2 4 6 50 100
DBE2008-045-N100S04 0.4 0.8 4 2.5 10 45 DBE2020-100-N600S04 1 2 4 6 60 100
DBE2010-060-N030S04 0.5 1 4 3 3 60 DBE2030-060-N100S04 1.5 3 4 9 10 60
DBE2010-060-N040S04 0.5 1 4 3 4 60 DBE2030-100-N150S04 1.5 3 4 9 15 100
DBE2010-060-N050S04 0.5 1 4 3 5 60 DBE2030-100-N150S06 1.5 3 6 9 15 100
DBE2010-060-N060S04 0.5 1 4 3 6 60 DBE2030-100-N200S04 1.5 3 4 9 20 100
DBE2010-060-N080S04 0.5 1 4 3 8 60 DBE2030-100-N250S04 1.5 3 4 9 25 100
DBE2010-060-N100S04 0.5 1 4 3 10 60 DBE2030-100-N300S04 1.5 3 4 9 30 100
DBE2010-060-N120S04 0.5 1 4 3 12 60 DBE2030-100-N350S04 1.5 3 4 9 35 100
DBE2010-060-N150S04 0.5 1 4 3 15 60 DBE2030-100-N400S04 1.5 3 4 9 40 100
DBE2010-060-N200S04 0.5 1 4 3 20 60 DBE2030-100-N500S04 1.5 3 4 9 50 100
DBE2010-080-N250S04 0.5 1 4 3 25 80 DBE2030-100-N600S04 1.5 3 4 9 60 100
DBE2010-080-N300S04 0.5 1 4 3 30 80 DBE2040-060-N160S04 2 4 4 12 16 60
258 KORLOY
DBE2000 (Ball)
DBE t50-&3"/$&
30 ~ Ø5.9 0 ~ -0.02mm
ND3000 h6
)&-*9 Ø6.0 ~ 0 ~ -0.03mm
p.527
R 2
(mm)
DBE2040-080-N160S04 2 4 4 12 16 80 DBE2080-110-N300S08 4 8 8 25 30 110

DBE2040-080-N300S04 2 4 4 12 30 80 DBE2080-110-N400S08 4 8 8 25 40 110
DBE2040-100-N160S04 2 4 4 12 16 100 DBE2080-150-N500S08 4 8 8 25 50 150
DBE2040-100-N400S04 2 4 4 12 40 100 DBE2080-200-N400S08 4 8 8 25 40 200
DBE2040-130-N160S04 2 4 4 12 16 130 DBE2100-080-N400S10 5 10 10 30 40 80
DBE2040-130-N400S04 2 4 4 12 40 130 DBE2100-110-N400S10 5 10 10 30 40 110
DBE2040-150-N160S04 2 4 4 12 16 150 DBE2100-110-N500S10 5 10 10 30 50 110
DBE2040-150-N500S04 2 4 4 12 50 150 DBE2100-150-N600S10 5 10 10 30 60 150
DBE2050-110-N200S06 2.5 5 6 15 20 110 DBE2100-160-N600S10 5 10 10 30 60 160
DBE2060-080-N250S06 3 6 6 20 25 80 DBE2100-200-N500S10 5 10 10 30 50 200
DBE2060-110-N250S06 3 6 6 20 25 110 DBE2120-110-N500S12 6 12 12 35 50 110
DBE2060-110-N400S06 3 6 6 20 40 110 DBE2120-150-N500S12 6 12 12 35 50 150
DBE2060-150-N300S06 3 6 6 20 30 150 DBE2120-160-N500S12 6 12 12 35 50 160
DBE2060-150-N500S06 3 6 6 20 50 150 DBE2120-200-N600S12 6 12 12 35 60 200
DBE2080-080-N300S08 4 8 8 25 30 80
KORLOY
Y 259
Endmill
D Endmill
DBE4000 (Ball)
DBE t50-&3"/$&
30 ~ Ø5.9 0 ~ -0.02mm
ND3000 h6
)&-*9 Ø6.0 ~ 0 ~ -0.03mm
p.527
R 2
(mm)
DBE4010-060-N030S04 0.5 1 4 3 - 60
DBE4010-060-N050S04 0.5 1 4 3 5 60
DBE4010-060-N100S04 0.5 1 4 3 10 60
DBE4010-060-N150S04 0.5 1 4 3 15 60
DBE4010-060-N200S04 0.5 1 4 3 20 60
DBE4010-060-N250S04 0.5 1 4 3 25 60
DBE4015-045-N040S04 0.75 1.5 4 4 - 45
DBE4015-050-N040S04 0.75 1.5 4 4 - 50
DBE4015-060-N100S04 0.75 1.5 4 4 10 60
DBE4015-060-N150S04 0.75 1.5 4 4 15 60
DBE4015-060-N200S04 0.75 1.5 4 4 20 60
DBE4015-060-N250S04 0.75 1.5 4 4 25 60
DBE4020-060-N080S04 1 2 4 6 8 60
DBE4020-080-N100S04 1 2 4 6 10 80
DBE4020-080-N200S04 1 2 4 6 20 80
DBE4020-080-N300S04 1 2 4 6 30 80
DBE4020-080-N400S04 1 2 4 6 40 80
DBE4030-060-N100S04 1.5 3 4 9 10 60
DBE4030-100-N150S04 1.5 3 4 9 15 100
DBE4030-100-N200S04 1.5 3 4 9 20 100
DBE4030-100-N300S04 1.5 3 4 9 30 100
DBE4030-100-N400S04 1.5 3 4 9 40 100
DBE4030-100-N500S04 1.5 3 4 9 50 100
DBE4040-060-N160S04 2 4 4 12 16 60
DBE4040-080-N160S04 2 4 4 12 16 80
DBE4040-100-N160S04 2 4 4 12 16 100
DBE4040-130-N160S04 2 4 4 12 16 130
DBE4060-080-N250S06 3 6 6 20 25 80
DBE4060-110-N250S06 3 6 6 20 25 110
DBE4060-150-N300S06 3 6 6 20 30 150
DBE4080-080-N300S08 4 8 8 25 30 80
DBE4080-110-N300S08 4 8 8 25 30 110
DBE4080-150-N350S08 4 8 8 25 35 150
DBE4080-200-N400S08 4 8 8 25 40 200
260 KORLOY
DBE4000 (Ball)
DBE t50-&3"/$&
30 ~ Ø5.9 0 ~ -0.02mm
ND3000 h6
)&-*9 Ø6.0 ~ 0 ~ -0.03mm
p.527
R 2
5 10 10 30 35 80
DBE4100-110-N350S10 5 10 10 30 35 110
DBE4100-150-N400S10 5 10 10 30 40 150
DBE4100-160-N400S10 5 10 10 30 40 160
DBE4100-200-N500S10 5 10 10 30 50 200
DBE4120-110-N500S12 6 12 12 35 50 110
DBE4120-150-N500S12 6 12 12 35 50 150
DBE4120-200-N600S12 6 12 12 35 60 200
KORLOY
Y 261
Router endmill for machining composite materials

t Router endmills optimized for machining composite materials (CFRP/GFRP)
t Excellent tool life thanks to nano-crystal diamond coating
t Blade design for reducing flaking and burrs
t Improved productivity through high efficiency machining
Features
Excellent
t Diamond-coated grade ND2110 for machining resistance
to friction
composite materials
t High hardness diamond coating (over Hv 8,000)
t Nano-diamond coating with excellent resistance to
friction and welding
t Improved resistance to flaking thanks by applying the Nano-diamond coating Existing diamond coating
specialized grade for diamond coating
CCDR (Dual Helix Router Endmill) CCHR (High-performance Router Endmill)
t Dual helix design to inhibit flaking t Multi flute nick shaped for high
on upper and lower faces of efficient machining
workpieces t Endmill for shape contouring,
t Endmill for finishing, profiling, grooving, roughing
and grooving
CCR (Router Endmill) $$-3(Low Helix Router Endmill)
t Down cut design for low vibrations t Fewer burrs thanks to the low axial
and cutting force cutting force
t Endmill for roughing, profiling, t Endmill for finishing, profiling,
and grooving and blind groove making
CCRR (Reverse Helix Router Endmill)
t Reverse helix design to inhibit a drift

in the workpiece’s course
t Endmill for finishing, profiling,
and through groove making
262 KORLOY
CDR4000/6000 (Flat)
CCD t50-&3"/$&
Substrate ØD Ød
30 /-30
ND2100 Ø6 ~ Ø12 0 ~ -0.03mm h5
)&-*9
Fig. 1
1
Fig. 2
1
2
(mm)
Designation ØD Ød ℓ1 ℓ2 L Fig.
CCDR 4060-065 6 6 3 18 65 1
CCDR 4080-075 8 8 4 24 75 1
CCDR 6100-085 10 10 5 30 85 2
CCDR 6120-100 12 12 6 36 100 2
t50-&3"/$&
Substrate ØD Ød
30 /-30
0 ~ -0.0012
ND2100 Ø0.25 ~ Ø0.5 h5
)&-*9 (inch)
(inch)
Designation ØD Ød ℓ1 ℓ2 L Fig.
CCDR 402500 1/4 0.250 0.25 0.125 0.75 2.5 1

CCDR 402500L 1/4 0.250 0.25 0.125 1.5 4 1
CCDR 603750 3/8 0.375 0.375 0.125 1 3.25 2
CCDR 603750L 3/8 0.375 0.375 0.125 1.5 4 2
CCDR 605000 1/2 0.500 0.5 0.125 1 3.25 2
CCDR 605000L 1/2 0.500 0.5 0.125 1.5 4 2
KORLOY
Y 263
Endmill
CHR4000/6000 (Flat)
CCH t50-&3"/$&
Substrate ØD Ød
15
ND2100 Ø6 ~ Ø12 0 ~ -0.05mm h5
)&-*9
Fig. 1
ℓ
Fig. 2
ℓ
(mm)
Designation ØD Ød ℓ L Fig.
CCHR 4060-065 6 6 18 65 1
CCHR 4080-075 8 8 24 75 1
CCHR 6100-085 10 10 30 85 2
CCHR 6120-100 12 12 36 100 2
t50-&3"/$&
Substrate ØD Ød
15
0 ~ -0.002
ND2100 Ø0.25 ~ Ø0.5 h5
)&-*9 (inch)
(inch)
CCHR 402500 1/4 0.250 0.25 0.75 2.5 1

CCHR 402500L 1/4 0.250 0.25 1.5 4 1
CCHR 603750 3/8 0.375 0.375 1 3.25 2
CCHR 603750L 3/8 0.375 0.375 1.5 4 2
CCHR 605000 1/2 0.500 0.5 1 3.25 2
CCHR 605000L 1/2 0.500 0.5 1.5 4 2
264 KORLOY
CR2000 (Flat)
CCR t50-&3"/$&
Substrate ØD Ød
-27
ND2100 Ø4 ~ Ø12 -0.02 ~ -0.08mm h5
)&-*9
CCR 2040-050 4 4 12 50
CCR 2050-050 5 5 15 50
CCR 2060-065 6 6 18 65
CCR 2080-075 8 8 24 75
CCR 2100-085 10 10 30 85
CCR 2120-100 12 12 36 100
t50-&3"/$&
Substrate ØD Ød
-27
-0.0008 ~ -0.0032
ND2100 Ø0.25 ~ Ø0.5 h5
)&-*9 (inch)
(inch)
CCR 202500 1/4 0.250 0.25 0.75 2.5

CCR 202500L 1/4 0.250 0.25 1.5 4
CCR 203750 3/8 0.375 0.375 1 3.25
CCR 203750L 3/8 0.375 0.375 1.5 4
CCR 205000 1/2 0.500 0.5 1 3.25
CCR 205000L 1/2 0.500 0.5 1.5 4
KORLOY
Y 265
Endmill
$-3(Flat)
$$- t50-&3"/$&
Substrate ØD Ød
15
ND2100 Ø4 ~ Ø12 0 ~ -0.03mm h5
)&-*9
CCLR 4040-050 4 4 12 50
CCLR 4050-050 5 5 15 50
CCLR 4060-065 6 6 18 65
CCLR 4080-075 8 8 24 75
CCLR 4100-085 10 10 30 85
CCLR 4120-100 12 12 36 100
t50-&3"/$&
Substrate ØD Ød
15
0 ~ -0.0012
ND2100 Ø0.25 ~ Ø0.5 h5
)&-*9 (inch)
(inch)
CCLR 402500 1/4 0.250 0.25 0.75 2.5

CCLR 402500L 1/4 0.250 0.25 1.5 4
CCLR 403750 3/8 0.375 0.375 1 3.25
CCLR 403750L 3/8 0.375 0.375 1.5 4
CCLR 405000 1/2 0.500 0.5 1 3.25
CCLR 405000L 1/2 0.500 0.5 1.5 4
266 KORLOY
CRR6000/8000 (Flat)
CCR t50-&3"/$&
Substrate ØD Ød
-25
ND2100 Ø6 ~ Ø12 0 ~ -0.03mm h5
)&-*9
Fig. 1
Fig. 2
(mm)
CCRR 6060-065 6 6 18 65 1
CCRR 6080-075 8 8 24 75 1
CCRR 8100-085 10 10 30 85 2
CCRR 8120-100 12 12 36 100 2
t50-&3"/$&
Substrate ØD Ød
-25
0 ~ -0.0012
ND2100 Ø0.25 ~ Ø0.5 h5
)&-*9 (inch)
(inch)
CCRR 602500 1/4 0.250 0.25 0.75 2.5 1

CCRR 602500L 1/4 0.250 0.25 1.5 4 1
CCRR 803750 3/8 0.375 0.375 1 3.25 2
CCRR 803750L 3/8 0.375 0.375 1.5 4 2
CCRR 805000 1/2 0.500 0.5 1 3.25 2
CCRR 805000L 1/2 0.500 0.5 1.5 4 2
KORLOY
Y 267
Endmill for machining dental prostheses
T Endmill
t For machining dental prostheses made of zirconia, titanium, Co-Cr, wax, PMMA, etc
t Optimized cutting performance by matching a proper grade with each type of materials
t Inhibited unevenness and excellent finish in machined surfaces due to the optimized
cutting-edge design
t Specialized tool shape for each machine type
Features
t A dedicated tool for each machine - Meets marketplace demands
t A specialized grade for each workpiece - Provides optimized performance for various materials of implants
t Optimized cutting-edge design - Enables excellent machinability
t Tangential cutting-edge geometries

- One-Pass grinding system
- Prevents stepped cone on the machined surface
- 2-flutes and 4-flutes tooling with a ball nose
t Center-matched ball shape (4-flutes)

- Ball point shape for high feed machining
- Improved rigidity and excellent surface finish
DATA
Code system p.528
T Z BE 2 030 050 N100 S04 (Z-MATCH)

T Endmill Type Drill dia. Neck length Machine Maker
BE : Ball Endmill 030 : 3 mm N100 : 10 mm
FE : Flat Endmill
RE : Radius Endmill
Workpiece No. of flutes Overall length Shank dia.

Z : Zirconia 2 : 2 Flute 050 : 50 mm S04 : 4 mm
T : Ti/Co-Cr
W : Wax/PMMA
268 KORLOY
Grade solution for zirconia

t Development of ND3000 (Diamond-coated grade)
- High hardness diamond coating that is excellent in machining graphite and ceramic
- Optimized for high speed and medium duty cutting thanks to its excellent grip to coated layers
Surface of ND3000 Cross section of coated layers
High hardness diamond

Specialized grade for Zirconia
coating (Hv 10,000) provides
provides excellent adhesion
excellent wear resistance
Grade solution for titanium

t Development of PC2510 (Coated grade for high hardened steel)
- Post-coating treatment was applied to improve surface finish
- A grade optimized for interrupted machining of high hardness steels and wet treatment accompanying high thermal shock.
Its ultrafine substrate features high toughness which allows stable performance
I
Improved Improved
wear surface finish
resistance
e
Fine grade Ultrafine grade Conventional coating Post-coating treatment
Performance evaluation
Workpiece Co-Cr
ap (mm) = 0.13, ae (mm) = 0.7, wet
Tools TTBE2030-050
[ Test result ]
No. of machined pockets (ea)
30%
longer T Endmill Competitor
80 Excellent resistance to toughness and wear
more
thanks to the new grade PC2510
40
T Endmill Competitor
KORLOY
Y 269
Endmill
T Endmill
Special T Endmill order form [ Data Sheet ]
Type of machine
t4UPQSJOHTBOEPUIFSUPPMSFTPVSDFTDBOCFNBEFUPPSEFS
Workpiece
Dental material
Cutting diameter (D1)
D1 D2 Shank diameter (D2)
L1 Cutting length (L1)
L2 Neck length (L2)
Stop ring position (L3)
L3
Overall length (L4)
L4 Stop ring shape
[ Stop ring specification ]
ØD_i ØD_o
ØD_i
t ØD_o t
< Plastic ring > < E type ring >

(mm)
Stop ring Shank diameter

Type
ØD_o ØD_i t Ø3 Ø4 Ø6
Ø7.55 Ø3 4.45
Plastic ring Ø7.7 Ø4 5.0
Ø10.5 Ø6 6.5
E type ring Ø6.0 Ø2.5 0.4

٘ Stop ring can be made to order when specified sizes are send to an adjacent KORLOY sales office
270 KORLOY
-POHFSUPPMMJGFBOEHPPETVSGBDFGJOJTIFT
PCD Endmill
t Longer tool life and good surface roughness
t Reducing burrs at non-ferrous metals machining
t 1000 type: Ultra finishing for non-ferrous metals
t 2000 type: Optimal for aluminum alloy, carbon steel, graphite and reinforced Plastic machining
DE1000/2000 (Flat)
PDE
0 Substrate DATA
PCD
)&-*9 DP200
p.528
(mm)
PDE 1040 4 6 15 45
PDE 1050 5 6 15 50
PDE 1060 6 6 20 60
PDE 2060 6 8 20 60
PDE 2070 7 8 20 60
PDE 2080 8 8 20 60
PDE 2090 9 10 25 70
PDE 2100 10 10 25 70
PDE 2120 12 12 25 75
Special endmill order form
Fig. 1 Fig. 2
No. of Dimension (mm)

Designation Fig.
flute ØD Ød r a ℓ L
PDES
٘ Depending on customer requests, we can make special Endmill
KORLOY
Y 271
PART 2
Product details
272
27
272 KO
ORL
LOY
OY
Technical information for Drill
MSD Plus 2 6
27
MSD
MS D Pl
P uss-S
S 282
28 2
MLLD Pl
M P us
u 287
28 7
MS
MSD
SD Pl
Plus
us CFR
RP 29
90
MSFD
MS
SFD
D 292
29 2
P-St
P- S ar Dri
St rill
lll 297
29 7
W-St
W- Star
St a Dri
ar r ll 315
31 5
SSD-
SS D--N 324
32 4
Burn
Bu rnis
rn i hi
is hing
ng Dri
r ll
l 327
32 7
Top
To p So
Soli
lid
d Dr
D il
illl 329
32 9
PCD
D Dr
Dril
illl 330
33 0
Gu
un Dr
D il
il 333
33 3
KO
ORL
RLOY
Y 273
Solid Drill
Application area
Accuracy of processing
Aspect ratio (L/D)

IT8
100
P-Star
t Gun Drill
G
Gu
50
MLD Pl
MLD Plus
MLD
D Plus MSD Pluss
W -Star 10
8
P-S
P Sttar
taa
IT9
Gun Drill
G D ill MSD P
Plus,
Plus
5 W-Staar
a
3
0 Ø05 Ø10 Ø20 Ø30 Drill dia. (mm) 0 Ø05 Ø10 Ø20 Ø30 Drill dia. (mm)
Solid drill Line-up and features

Aspect
Work- Product Drill dia.
Use Coolant ratio Geometries Features
piece name (tolerance)
(L/D)
Medium Central/ Ø3.0~20.0 •The optimal international standard for

P-Star 3D~8D
hardness peripheral (h7) high speed machining with ~ HRC50
•High efficiency machining for

Central/ Ø1.0~20.0
MSD Plus 3D~7D various workpiece machining such as
peripheral (h7)
automobile components
MLD Plus Ø3.0~10.0 •For deep drilling with high efficiency

Central 10D~25D
(Long drill) (h7) and high quality
PM K
Ø1.0~20.0
W-Star Peripheral 5D~7D •High efficient and economic endmill
General (h7)
•Flat drill for various types of drill-

Central/ Ø2.5~12.0 ing such as helical machining, curved
MSFD 2D~3D
peripheral (h7) surface machining, flat surface machin-
ing, etc.
50D •High efficient drilling of deep hole

Ø3.0~33.0 (50D~100D)
Gun Drill - ~
(h7)
100D •Availability of special types
•For HRSA machining

Ø3.0~16.0 •For hard-to-cut material machining of
S HRSA MSD Plus-S Central
(h7)
3D~5D
aerospace, energy, power generation,
automobile, etc.
MSD Plus Ø3.0~12.7

CFRP Peripheral 5D •Machining for CFRP workpiece
CFRP (m7)
Ø1.0~13.0 •Non-coated drill for non-ferrous steel

N SSD-N Peripheral
(h7)
-
and mild steel
Non-ferrous
metal,
Aluminum
Ø2.0~12.0 •High precision and surface finish
PCD Drill Peripheral -
(h7) •Cone/Sandwich type
274 KORLOY
Aspect
Type Designation Shape Drills dia. Page
ratio
Mach Solid Drill

MSDPH Ø2.5 ~ Ø20.0 3D ~ 7D 277
Plus
Mach Solid Drill
MSDPH-S Ø3.0 ~ Ø16.0 3D ~ 5D 283
Plus-S
Mach Long Drill
MLD Ø3.0 ~ Ø10.0 10D ~ 25D 288
Plus
Mach Solid Drill
MSDP-C Ø3.0 ~ Ø12.7 5D 291
Plus CFRP
MSFD Ø2.5 ~ Ø16.0 2D 293

Mach Solid
Flat Drill
MSFDH Ø2.5 ~ Ø16.0 3D 295
HP503 Ø3.0 ~ Ø16.0 3D 299
HPI503 Ø3.0 ~ Ø20.0 3D 301
HPI505 Ø3.0 ~ Ø20.0 5D 304
P-Star Drill HPI508-N Ø3.0 ~ Ø20.0 8D 307
P503A(F) Ø3.0 ~ Ø20.0 3D 309
PI503A(F) Ø3.0 ~ Ø20.0 3D 311
PI505A(F) Ø4.0 ~ Ø20.0 5D 313

Solid Drills
NDPG503 Ø1.0 ~ Ø13.0 3D 316
W-Star Drill NDPG504 Ø1.0 ~ Ø20.0 4D 318
NDPG507 Ø3.0 ~ Ø20.0 7D 321
Carbide Drill SSD-N Ø1.0 ~ Ø13.0 - 325
BDS Ø4.0 ~ Ø16.0 5D ~ 7D 327

Burnishing Drill
BDT Ø4.2 ~ Ø10.3 2D ~ 4D 328
Top solid Drill TSDM Ø8.0 ~ Ø25.0 5D ~ 8D 329
PDD Ø5.0 ~ Ø12.0 5D 330
CPD Ø2.0 ~ Ø8.0 3D ~ 5D 331

PCD Drill
CPDL Ø2.0 ~ Ø8.0 12D ~ 45D 331
SPD Ø4.0 ~ Ø16.0 4D ~ 5D 332
KGDS Ø3.0 ~ Ø33.0 50D ~ 100D 334

Gun Drill
KGDT Ø6.0 ~ Ø26.5 50D ~ 100D 335
KORLOY 275
Highly efficient hole making for various workpieces including components
MSD Plus
Mach Solid Drill Plus
Special type
Code system
MSDPH 040 5 P 100L 5S

Oil hole Standard type Overall length
None : MSDP Aspect ratio (L/D) 100L : 100 mm
With oil hole : MSDPH 3D, 5D, 7D
Drill dia.(ØD) Special type Machining area Shank dia.

040 : Ø4.0 mm Flute length P : Carbon steel, alloy steel 5S : Ø5 mm
(One decimal place marked) 100 : 100 mm M : Stainless steel
K : Cast iron
N : Aluminum, copper alloy
Features
t New grade (PC325U)
- Lubricative coating layer improves welding resistance at middle to
o high speed.
- Increase wear resistance in machining carbon steel
IIncreased
wear
resistancee
t Surface of coating layer

- Increased welding resistance and lower cutting load
- Reduced frictional resistance at cutting edges and on the flute
t Flute shape
Improved - Improved chip evacuation thanks
lubrication to wider chip pocket
Rough coating surface Smooth coating surface
Application area
Cutting speed, vc (m/min)
200
FG2
150
PC325U PC325U
100 PC325U PC325U
PC325U
50
Workpiece
P P M K K N
Carbon steel Alloy steel Stainless steel Gray cast iron Ductile cast iron Aluminum
276 KORLOY
MSDPH
DPH - (P/M/K/N)
t50-&3"/$&
DATA Terminology P M K N
Grade PC325U FG2
( Dia.)
Tolerance(drill h7
p.529
(
Tolerance(shank Dia.) h6
Point angle 140° 135°
Twist angle 30°
Thinning X type
Coolant Through/External
P Steel M Stainless steel K Cast iron N Non-ferrous metal
3P,M,K,N 5P,M,K,N 7P,M,K,N

Designation ØD Ød
ℓ L ℓ L ℓ L
MSDPH 025 - P,M,K,N 2.5 3 14 53 20 66 30 70
MSDPH 026 - P,M,K,N 2.6 3 17 53 20 66 30 70
MSDPH 027 - P,M,K,N 2.7 3 17 53 20 66 30 70
MSDPH 028 - P,M,K,N 2.8 3 17 53 20 66 30 70
MSDPH 029 - P,M,K,N 2.9 3 17 53 20 66 30 70
MSDPH 030 - P,M,K,N 3 3 17 53 20 66 30 70
MSDPH 031 - P,M,K,N 3.1 4 20 58 28 74 30 70
MSDPH 032 - P,M,K,N 3.2 4 20 58 28 74 30 70
MSDPH 033 - P,M,K,N 3.3 4 20 58 28 74 30 70
MSDPH 034 - P,M,K,N 3.4 4 20 58 28 74 37.5 75
MSDPH 035 - P,M,K,N 3.5 4 20 58 28 74 37.5 75
MSDPH 036 - P,M,K,N 3.6 4 22 58 32 74 37.5 75
MSDPH 037 - P,M,K,N 3.7 4 22 58 32 74 37.5 75
MSDPH 038 - P,M,K,N 3.8 4 22 58 32 74 37.5 75
MSDPH 039 - P,M,K,N 3.9 4 22 58 32 74 37.5 75
MSDPH 040 - P,M,K,N 4 4 22 58 32 74 37.5 75
MSDPH 041 - P,M,K,N 4.1 5 24 62 36 82 37.5 75
MSDPH 042 - P,M,K,N 4.2 5 24 62 36 82 37.5 75
MSDPH 043 - P,M,K,N 4.3 5 24 62 36 82 45 85
MSDPH 044 - P,M,K,N 4.4 5 24 62 36 82 45 85
MSDPH 045 - P,M,K,N 4.5 5 24 62 36 82 45 85
MSDPH 046 - P,M,K,N 4.6 5 26 62 38 82 45 85
MSDPH 047 - P,M,K,N 4.7 5 26 62 38 82 45 85
MSDPH 048 - P,M,K,N 4.8 5 26 62 38 82 50 90
MSDPH 049 - P,M,K,N 4.9 5 26 62 38 82 50 90
MSDPH 050 - P,M,K,N 5 5 26 62 38 82 50 90
MSDPH 051 - P,M,K,N 5.1 6 28 66 44 82 50 90
MSDPH 052 - P,M,K,N 5.2 6 28 66 44 82 50 90
MSDPH 053 - P,M,K,N 5.3 6 28 66 44 82 50 90
MSDPH 054 - P,M,K,N 5.4 6 28 66 44 82 50 90
MSDPH 055 - P,M,K,N 5.5 6 28 66 44 82 57 97
MSDPH 056 - P,M,K,N 5.6 6 28 66 44 82 57 97
MSDPH 057 - P,M,K,N 5.7 6 28 66 44 82 57 97
MSDPH 058 - P,M,K,N 5.8 6 28 66 44 82 57 97
MSDPH 059 - P,M,K,N 5.9 6 28 66 44 82 57 97
MSDPH 060 - P,M,K,N 6 6 28 66 44 82 57 97
MSDPH 061 - P,M,K,N 6.1 7 34 74 50 91 66 106
KORLOY
Y 277
Drill
MSD Plus
MSDP
SDPH - (P/M/K/N)
t50-&3"/$&
Grade PC325U FG2
( Dia.)
Tolerance(drill h7
p.529
(
Twist angle 30°
Thinning X type
(mm)
Designation ØD Ød
ℓ L ℓ L ℓ L
MSDPH 062 - P,M,K,N 6.2 7 34 74 50 91 66 106
MSDPH 063 - P,M,K,N 6.3 7 34 74 50 91 66 106
MSDPH 064 - P,M,K,N 6.4 7 34 74 50 91 66 106
MSDPH 065 - P,M,K,N 6.5 7 34 74 50 91 66 106
MSDPH 066 - P,M,K,N 6.6 7 34 74 50 91 66 106
MSDPH 067 - P,M,K,N 6.7 7 34 74 50 91 66 106
MSDPH 068 - P,M,K,N 6.8 7 34 74 50 91 66 106
MSDPH 069 - P,M,K,N 6.9 7 34 74 50 91 76 116
MSDPH 070 - P,M,K,N 7 7 34 74 50 91 76 116
MSDPH 071 - P,M,K,N 7.1 8 41 79 53 91 76 116
MSDPH 072 - P,M,K,N 7.2 8 41 79 53 91 76 116
MSDPH 073 - P,M,K,N 7.3 8 41 79 53 91 76 116
MSDPH 074 - P,M,K,N 7.4 8 41 79 53 91 76 116
MSDPH 075 - P,M,K,N 7.5 8 41 79 53 91 76 116
MSDPH 076 - P,M,K,N 7.6 8 41 79 53 91 76 116
MSDPH 077 - P,M,K,N 7.7 8 41 79 53 91 76 116
MSDPH 078 - P,M,K,N 7.8 8 41 79 53 91 76 116
MSDPH 079 - P,M,K,N 7.9 8 41 79 53 91 76 116
MSDPH 080 - P,M,K,N 8 8 43 84 58 98 87 131
MSDPH 081 - P,M,K,N 8.1 9 43 84 58 98 87 131
MSDPH 082 - P,M,K,N 8.2 9 43 84 58 98 87 131
MSDPH 083 - P,M,K,N 8.3 9 43 84 58 98 87 131
MSDPH 084 - P,M,K,N 8.4 9 43 84 58 98 87 131
MSDPH 085 - P,M,K,N 8.5 9 43 84 58 98 87 131
MSDPH 086 - P,M,K,N 8.6 9 43 84 58 98 87 131
MSDPH 087 - P,M,K,N 8.7 9 43 84 58 98 87 131
MSDPH 088 - P,M,K,N 8.8 9 43 84 58 98 87 131
MSDPH 089 - P,M,K,N 8.9 9 43 84 58 98 87 131
MSDPH 090 - P,M,K,N 9 9 43 84 58 98 87 131
MSDPH 091 - P,M,K,N 9.1 10 47 89 61 105 95 139
MSDPH 092 - P,M,K,N 9.2 10 47 89 61 105 95 139
MSDPH 093 - P,M,K,N 9.3 10 47 89 61 105 95 139
MSDPH 094 - P,M,K,N 9.4 10 47 89 61 105 95 139
MSDPH 095 - P,M,K,N 9.5 10 47 89 61 105 95 139
MSDPH 096 - P,M,K,N 9.6 10 47 89 61 105 95 139
MSDPH 097 - P,M,K,N 9.7 10 47 89 61 105 95 139
MSDPH 098 - P,M,K,N 9.8 10 47 89 61 105 95 139
278 KORLOY
MSDPH
DPH - (P/M/K/N)
t50-&3"/$&
Grade PC325U FG2
( Dia.)
Tolerance(drill h7
p.529
(
Twist angle 30°
Thinning X type

Designation ØD Ød
ℓ L ℓ L ℓ L
MSDPH 099 - P,M,K,N 9.9 10 47 89 61 105 95 139
MSDPH 100 - P,M,K,N 10 10 47 89 61 105 95 139
MSDPH 101 - P,M,K,N 10.1 11 55 95 68 114 106 155
MSDPH 102 - P,M,K,N 10.2 11 55 95 68 114 106 155
MSDPH 103 - P,M,K,N 10.3 11 55 95 68 114 106 155
MSDPH 104 - P,M,K,N 10.4 11 55 95 68 114 106 155
MSDPH 105 - P,M,K,N 10.5 11 55 95 68 114 106 155
MSDPH 106 - P,M,K,N 10.6 11 55 95 68 114 106 155
MSDPH 107 - P,M,K,N 10.7 11 55 95 68 114 106 155
MSDPH 108 - P,M,K,N 10.8 11 55 95 68 114 106 155
MSDPH 109 - P,M,K,N 10.9 11 55 95 68 114 106 155
MSDPH 110 - P,M,K,N 11 11 55 95 68 114 106 155
MSDPH 111 - P,M,K,N 11.1 12 55 102 71 120 114 163
MSDPH 112 - P,M,K,N 11.2 12 55 102 71 120 114 163
MSDPH 113 - P,M,K,N 11.3 12 55 102 71 120 114 163
MSDPH 114 - P,M,K,N 11.4 12 55 102 71 120 114 163
MSDPH 115 - P,M,K,N 11.5 12 55 102 71 120 114 163
MSDPH 116 - P,M,K,N 11.6 12 55 102 71 120 114 163
MSDPH 117 - P,M,K,N 11.7 12 55 102 71 120 114 163
MSDPH 118 - P,M,K,N 11.8 12 55 102 71 120 114 163
MSDPH 119 - P,M,K,N 11.9 12 55 102 71 120 114 163
MSDPH 120 - P,M,K,N 12 12 55 102 71 120 114 163
MSDPH 121 - P,M,K,N 12.1 13 60 107 77 124 133 182
MSDPH 122 - P,M,K,N 12.2 13 60 107 77 124 133 182
MSDPH 123 - P,M,K,N 12.3 13 60 107 77 124 133 182
MSDPH 124 - P,M,K,N 12.4 13 60 107 77 124 133 182
MSDPH 125 - P,M,K,N 12.5 13 60 107 77 124 133 182
MSDPH 126 - P,M,K,N 12.6 13 60 107 77 124 133 182
MSDPH 127 - P,M,K,N 12.7 13 60 107 77 124 133 182
MSDPH 128 - P,M,K,N 12.8 13 60 107 77 124 133 182
MSDPH 129 - P,M,K,N 12.9 13 60 107 77 124 133 182
MSDPH 130 - P,M,K,N 13 13 60 107 77 124 133 182
MSDPH 131 - P,M,K,N 13.1 14 62 107 80 133 133 182
MSDPH 132 - P,M,K,N 13.2 14 62 107 80 133 133 182
MSDPH 133 - P,M,K,N 13.3 14 62 107 80 133 133 182
MSDPH 134 - P,M,K,N 13.4 14 62 107 80 133 133 182
MSDPH 135 - P,M,K,N 13.5 14 62 107 80 133 133 182
KORLOY
Y 279
Drill
MSD Plus
MSDPH
DPH - (P/M/K/N)
t50-&3"/$&
Grade PC325U FG2
( Dia.)
Tolerance(drill h7
p.529
(
Twist angle 30°
Thinning X type
(mm)
Designation ØD Ød
ℓ L ℓ L ℓ L
MSDPH 136 - P,M,K,N 13.6 14 62 107 80 133 133 182
MSDPH 137 - P,M,K,N 13.7 14 62 107 80 133 133 182
MSDPH 138 - P,M,K,N 13.8 14 62 107 80 133 133 182
MSDPH 139 - P,M,K,N 13.9 14 62 107 80 133 133 182
MSDPH 140 - P,M,K,N 14 14 62 107 80 133 133 182
MSDPH 141 - P,M,K,N 14.1 15 65 115 85 143 152 204
MSDPH 142 - P,M,K,N 14.2 15 65 115 85 143 152 204
MSDPH 143 - P,M,K,N 14.3 15 65 115 85 143 152 204
MSDPH 144 - P,M,K,N 14.4 15 65 115 85 143 152 204
MSDPH 145 - P,M,K,N 14.5 15 65 115 85 143 152 204
MSDPH 146 - P,M,K,N 14.6 15 65 115 85 143 152 204
MSDPH 147 - P,M,K,N 14.7 15 65 115 85 143 152 204
MSDPH 148 - P,M,K,N 14.8 15 65 115 85 143 152 204
MSDPH 149 - P,M,K,N 14.9 15 65 115 85 143 152 204
MSDPH 150 - P,M,K,N 15 15 65 115 85 143 152 204
MSDPH 151 - P,M,K,N 15.1 16 68 115 88 143 152 204
MSDPH 152 - P,M,K,N 15.2 16 68 115 88 143 152 204
MSDPH 153 - P,M,K,N 15.3 16 68 115 88 143 152 204
MSDPH 154 - P,M,K,N 15.4 16 68 115 88 143 152 204
MSDPH 155 - P,M,K,N 15.5 16 68 115 88 143 152 204
MSDPH 156 - P,M,K,N 15.6 16 68 115 88 143 152 204
MSDPH 157 - P,M,K,N 15.7 16 68 115 88 143 152 204
MSDPH 158 - P,M,K,N 15.8 16 68 115 88 143 152 204
MSDPH 159 - P,M,K,N 15.9 16 68 115 88 143 152 204
MSDPH 160 - P,M,K,N 16 16 68 115 88 143 152 204
MSDPH 161 - P,M,K,N 16.1 17 73 123 93 153 171 223
MSDPH 162 - P,M,K,N 16.2 17 73 123 93 153 171 223
MSDPH 163 - P,M,K,N 16.3 17 73 123 93 153 171 223
MSDPH 164 - P,M,K,N 16.4 17 73 123 93 153 171 223
MSDPH 165 - P,M,K,N 16.5 17 73 123 93 153 171 223
MSDPH 166 - P,M,K,N 16.6 17 73 123 93 153 171 223
MSDPH 167 - P,M,K,N 16.7 17 73 123 93 153 171 223
MSDPH 168 - P,M,K,N 16.8 17 73 123 93 153 171 223
MSDPH 169 - P,M,K,N 16.9 17 73 123 93 153 171 223
MSDPH 170 - P,M,K,N 17 17 73 123 93 153 171 223
MSDPH 171 - P,M,K,N 17.1 18 73 123 98 153 171 223
MSDPH 172 - P,M,K,N 17.2 18 73 123 98 153 171 223
280 KORLOY
MSDPH
DPH - (P/M/K/N)
t50-&3"/$&
Grade PC325U FG2
( Dia.)
Tolerance(drill h7
p.529
(
Twist angle 30°
Thinning X type

Designation ØD Ød
ℓ L ℓ L ℓ L
MSDPH 173 - P,M,K,N 17.3 18 73 123 98 153 171 223
MSDPH 174 - P,M,K,N 17.4 18 73 123 98 153 171 223
MSDPH 175 - P,M,K,N 17.5 18 73 123 98 153 171 223
MSDPH 176 - P,M,K,N 17.6 18 73 123 98 153 171 223
MSDPH 177 - P,M,K,N 17.7 18 73 123 98 153 171 223
MSDPH 178 - P,M,K,N 17.8 18 73 123 98 153 171 223
MSDPH 179 - P,M,K,N 17.9 18 73 123 98 153 171 223
MSDPH 180 - P,M,K,N 18 18 73 123 98 153 171 223
MSDPH 181 - P,M,K,N 18.1 19 79 131 103 153 190 244
MSDPH 182 - P,M,K,N 18.2 19 79 131 103 153 190 244
MSDPH 183 - P,M,K,N 18.3 19 79 131 103 153 190 244
MSDPH 184 - P,M,K,N 18.4 19 79 131 103 153 190 244
MSDPH 185 - P,M,K,N 18.5 19 79 131 103 153 190 244
MSDPH 186 - P,M,K,N 18.6 19 79 131 103 153 190 244
MSDPH 187 - P,M,K,N 18.7 19 79 131 103 153 190 244
MSDPH 188 - P,M,K,N 18.8 19 79 131 103 153 190 244
MSDPH 189 - P,M,K,N 18.9 19 79 131 103 153 190 244
MSDPH 190 - P,M,K,N 19 19 79 131 103 153 190 244
MSDPH 191 - P,M,K,N 19.1 20 79 131 107 153 190 244
MSDPH 192 - P,M,K,N 19.2 20 79 131 107 153 190 244
MSDPH 193 - P,M,K,N 19.3 20 79 131 107 153 190 244
MSDPH 194 - P,M,K,N 19.4 20 79 131 107 153 190 244
MSDPH 195 - P,M,K,N 19.5 20 79 131 107 153 190 244
MSDPH 196 - P,M,K,N 19.6 20 79 131 107 153 190 244
MSDPH 197 - P,M,K,N 19.7 20 79 131 107 153 190 244
MSDPH 198 - P,M,K,N 19.8 20 79 131 107 153 190 244
MSDPH 199 - P,M,K,N 19.9 20 79 131 107 153 190 244
MSDPH 200 - P,M,K,N 20 20 79 131 107 153 190 244
KORLOY
Y 281
Specialized for heat-resistant alloys used in the aerospace, energy,

power generation and automotive industries
MSD Plus-S
Mach Solid Drill Plus-S
t Improved Productivity and Excellent Machinability - Ensuring machinability with
optimized blade design and chip pockets
t Stronger Resistance to Wear - Extended tool life due to excellent high temp resistance to chipping
Special type
Code system
MSDP(H) 060 5 S 100L 5S

None : MSDP Aspect ratio (L/D) 100L : 100 mm
With oil hole : MSDPH 3D, 5D
Drill dia.(ØD) Special type Machining area Shank dia.

060 : Ø6.0 mm Flute length S : HRSA 5S : Ø5 mm
50 : 50 mm
Features
t Notch-controlled blade design and specially treated t Optimized margin and back-tapered design
cutting edges prevent chipping and breakage
① Cutting edges designed for ❶ Reduced friction resistance and cutting temperature
low cutting resistance ❷ Wider chip pockets improve chip evacuation
② Tip relief angle and shape optimized
d
for heat evacuation 1
1
2
t Improved resistance to heat and oxidation thanks to the newly applied grade, PC325T
t Reduced friction resistance and improved chip evacuation due to excellent surface finish
t Exceptional wear resistance when machining heat-resistant alloys at high temperatures
Stronger
wear
resistancee
PC325T Smooth coating surface
282 KORLOY
MSDPH-S
DPH-S t50-&3"/$&
DATA Terminology S
Grade PC325T
( Dia.)
Tolerance(drill h7
p.529
(
Point angle 140°
ØD Ød Twist angle 30°
Thinning X type
Coolant Through
International standard DIN 6537
L
Shank type DIN 6535 HA
S Heat resistant alloy, Titanium alloy
(mm)
ØD 3S 5S
Designation Ød ℓ2
mm inch ℓ1 L ℓ1 L
MSDPH 030 - S 3.00 - 6 20 62 28 66 36
MSDPH 031 - S 3.10 - 6 20 62 28 66 36
MSDPH 0318 - S 3.18 1/8 6 20 62 28 66 36
MSDPH 032 - S 3.20 - 6 20 62 28 66 36
MSDPH 033 - S 3.30 - 6 20 62 28 66 36
MSDPH 034 - S 3.40 - 6 20 62 28 66 36
MSDPH 035 - S 3.50 - 6 20 62 28 66 36
MSDPH 0357 - S 3.57 9/64 6 20 62 28 66 36
MSDPH 036 - S 3.60 - 6 20 62 28 66 36
MSDPH 037 - S 3.70 - 6 20 62 28 66 36
MSDPH 038 - S 3.80 - 6 24 66 36 74 36
MSDPH 039 - S 3.90 - 6 24 66 36 74 36
MSDPH 0397 - S 3.97 5/32 6 24 66 36 74 36
MSDPH 040 - S 4.00 - 6 24 66 36 74 36
MSDPH 041 - S 4.10 - 6 24 66 36 74 36
MSDPH 042 - S 4.20 - 6 24 66 36 74 36
MSDPH 043 - S 4.30 - 6 24 66 36 74 36
MSDPH 0437 - S 4.37 11/64 6 24 66 36 74 36
MSDPH 044 - S 4.40 - 6 24 66 36 74 36
MSDPH 045 - S 4.50 - 6 24 66 36 74 36
MSDPH 046 - S 4.60 - 6 24 66 36 74 36
MSDPH 047 - S 4.70 - 6 24 66 36 74 36
MSDPH 0476 - S 4.76 3/16 6 28 66 44 82 36
MSDPH 048 - S 4.80 - 6 28 66 44 82 36
MSDPH 049 - S 4.90 - 6 28 66 44 82 36
MSDPH 050 - S 5.00 - 6 28 66 44 82 36
MSDPH 051 - S 5.10 - 6 28 66 44 82 36
MSDPH 0516 - S 5.16 13/64 6 28 66 44 82 36
MSDPH 052 - S 5.20 - 6 28 66 44 82 36
MSDPH 053 - S 5.30 - 6 28 66 44 82 36
MSDPH 054 - S 5.40 - 6 28 66 44 82 36
MSDPH 055 - S 5.50 - 6 28 66 44 82 36
MSDPH 0556 - S 5.56 7/32 6 28 66 44 82 36
MSDPH 056 - S 5.60 - 6 28 66 44 82 36
MSDPH 057 - S 5.70 - 6 28 66 44 82 36
MSDPH 058 - S 5.80 - 6 28 66 44 82 36
MSDPH 059 - S 5.90 - 6 28 66 44 82 36
MSDPH 0595 - S 5.95 15/64 6 28 66 44 82 36
MSDPH 060 - S 6.00 - 6 28 66 44 82 36
KORLOY
Y 283
Drill
MSD Plus-S
MSDPH-S
DPH-S t50-&3"/$&
DATA Terminology S
Grade PC325T
( Dia.)
Tolerance(drill h7
p.529
(
Point angle 140°
Thinning X type
Coolant Through
L
(mm)
ØD 3S 5S
MSDPH 061 - S 6.10 - 8 34 79 53 91 36
MSDPH 062 - S 6.20 - 8 34 79 53 91 36
MSDPH 063 - S 6.30 - 8 34 79 53 91 36
MSDPH 0635 - S 6.35 1/4 8 34 79 53 91 36
MSDPH 064 - S 6.40 - 8 34 79 53 91 36
MSDPH 065 - S 6.50 - 8 34 79 53 91 36
MSDPH 066 - S 6.60 - 8 34 79 53 91 36
MSDPH 067 - S 6.70 - 8 34 79 53 91 36
MSDPH 0675 - S 6.75 17/64 8 34 79 53 91 36
MSDPH 068 - S 6.80 - 8 34 79 53 91 36
MSDPH 069 - S 6.90 - 8 34 79 53 91 36
MSDPH 070 - S 7.00 - 8 34 79 53 91 36
MSDPH 071 - S 7.10 - 8 41 79 53 91 36
MSDPH 0714 - S 7.14 9/32 8 41 79 53 91 36
MSDPH 072 - S 7.20 - 8 41 79 53 91 36
MSDPH 073 - S 7.30 - 8 41 79 53 91 36
MSDPH 074 - S 7.40 - 8 41 79 53 91 36
MSDPH 075 - S 7.50 - 8 41 79 53 91 36
MSDPH 0754 - S 7.54 19/64 8 41 79 53 91 36
MSDPH 076 - S 7.60 - 8 41 79 53 91 36
MSDPH 077 - S 7.70 - 8 41 79 53 91 36
MSDPH 078 - S 7.80 - 8 41 79 53 91 36
MSDPH 079 - S 7.90 - 8 41 79 53 91 36
MSDPH 0794 - S 7.94 5/16 8 41 79 53 91 36
MSDPH 080 - S 8.00 - 8 41 79 53 91 36
MSDPH 081 - S 8.10 - 10 47 89 61 103 40
MSDPH 082 - S 8.20 - 10 47 89 61 103 40
MSDPH 083 - S 8.30 - 10 47 89 61 103 40
MSDPH 0833 - S 8.33 21/64 10 47 89 61 103 40
MSDPH 084 - S 8.40 - 10 47 89 61 103 40
MSDPH 085 - S 8.50 - 10 47 89 61 103 40
MSDPH 086 - S 8.60 - 10 47 89 61 103 40
MSDPH 087 - S 8.70 - 10 47 89 61 103 40
MSDPH 0873 - S 8.73 11/32 10 47 89 61 103 40
MSDPH 088 - S 8.80 - 10 47 89 61 103 40
MSDPH 089 - S 8.90 - 10 47 89 61 103 40
MSDPH 090 - S 9.00 - 10 47 89 61 103 40
MSDPH 091 - S 9.10 - 10 47 89 61 103 40
MSDPH 0913 - S 9.13 23/64 10 47 89 61 103 40
284 KORLOY
MSDPH-S
DPH-S t50-&3"/$&
DATA Terminology S
Grade PC325T
( Dia.)
Tolerance(drill h7
p.529
(
Point angle 140°
Thinning X type
Coolant Through
L
(mm)
ØD 3S 5S
MSDPH 092 - S 9.20 - 10 47 89 61 103 40
MSDPH 093 - S 9.30 - 10 47 89 61 103 40
MSDPH 094 - S 9.40 - 10 47 89 61 103 40
MSDPH 095 - S 9.50 - 10 47 89 61 103 40
MSDPH 0953 - S 9.53 3/8 10 47 89 61 103 40
MSDPH 096 - S 9.60 - 10 47 89 61 103 40
MSDPH 097 - S 9.70 - 10 47 89 61 103 40
MSDPH 098 - S 9.80 - 10 47 89 61 103 40
MSDPH 099 - S 9.90 - 10 47 89 61 103 40
MSDPH 0992 - S 9.92 25/64 10 47 89 61 103 40
MSDPH 100 - S 10.00 - 10 47 89 61 103 40
MSDPH 101 - S 10.10 - 12 55 102 71 118 45
MSDPH 102 - S 10.20 - 12 55 102 71 118 45
MSDPH 103 - S 10.30 - 12 55 102 71 118 45
MSDPH 1032 - S 10.32 13/32 12 55 102 71 118 45
MSDPH 104 - S 10.40 - 12 55 102 71 118 45
MSDPH 105 - S 10.50 - 12 55 102 71 118 45
MSDPH 106 - S 10.60 - 12 55 102 71 118 45
MSDPH 107 - S 10.70 - 12 55 102 71 118 45
MSDPH 1072 - S 10.72 27/64 12 55 102 71 118 45
MSDPH 108 - S 10.80 - 12 55 102 71 118 45
MSDPH 109 - S 10.90 - 12 55 102 71 118 45
MSDPH 110 - S 11.00 - 12 55 102 71 118 45
MSDPH 111 - S 11.10 - 12 55 102 71 118 45
MSDPH 1111 - S 11.11 7/16 12 55 102 71 118 45
MSDPH 112 - S 11.20 - 12 55 102 71 118 45
MSDPH 113 - S 11.30 - 12 55 102 71 118 45
MSDPH 114 - S 11.40 - 12 55 102 71 118 45
MSDPH 115 - S 11.50 - 12 55 102 71 118 45
MSDPH 1151 - S 11.51 29/64 12 55 102 71 118 45
MSDPH 116 - S 11.60 - 12 55 102 71 118 45
MSDPH 117 - S 11.70 - 12 55 102 71 118 45
MSDPH 118 - S 11.80 - 12 55 102 71 118 45
MSDPH 119 - S 11.90 - 12 55 102 71 118 45
MSDPH 1191 - S 11.91 15/32 12 55 102 71 118 45
MSDPH 120 - S 12.00 - 12 55 102 71 118 45
MSDPH 121 - S 12.10 - 14 60 107 77 124 45
MSDPH 122 - S 12.20 - 14 60 107 77 124 45
MSDPH 123 - S 12.30 31/64 14 60 107 77 124 45
MSDPH 124 - S 12.40 - 14 60 107 77 124 45
KORLOY
Y 285
Drill
MSD Plus-S
MSDPH-S
DPH-S t50-&3"/$&
DATA Terminology S
Grade PC325T
( Dia.)
Tolerance(drill h7
p.529
(
Point angle 140°
Thinning X type
Coolant Through
L
(mm)
ØD 3S 5S
MSDPH 125 - S 12.50 - 14 60 107 77 124 45
MSDPH 126 - S 12.60 - 14 60 107 77 124 45
MSDPH 127 - S 12.70 1/2 14 60 107 77 124 45
MSDPH 128 - S 12.80 - 14 60 107 77 124 45
MSDPH 129 - S 12.90 - 14 60 107 77 124 45
MSDPH 130 - S 13.00 - 14 60 107 77 124 45
MSDPH 131 - S 13.10 - 14 60 107 77 124 45
MSDPH 132 - S 13.20 - 14 60 107 77 124 45
MSDPH 133 - S 13.30 - 14 60 107 77 124 45
MSDPH 134 - S 13.40 - 14 60 107 77 124 45
MSDPH 1349 - S 13.49 17/32 14 60 107 77 124 45
MSDPH 135 - S 13.50 - 14 60 107 77 124 45
MSDPH 136 - S 13.60 - 14 60 107 77 124 45
MSDPH 137 - S 13.70 - 14 60 107 77 124 45
MSDPH 138 - S 13.80 - 14 60 107 77 124 45
MSDPH 139 - S 13.90 - 14 60 107 77 124 45
MSDPH 140 - S 14.00 - 14 60 107 77 124 45
MSDPH 141 - S 14.10 - 16 65 115 83 133 48
MSDPH 142 - S 14.20 - 16 65 115 83 133 48
MSDPH 1429 - S 14.29 9/16 16 65 115 83 133 48
MSDPH 143 - S 14.30 - 16 65 115 83 133 48
MSDPH 144 - S 14.40 - 16 65 115 83 133 48
MSDPH 145 - S 14.50 - 16 65 115 83 133 48
MSDPH 146 - S 14.60 - 16 65 115 83 133 48
MSDPH 147 - S 14.70 - 16 65 115 83 133 48
MSDPH 148 - S 14.80 - 16 65 115 83 133 48
MSDPH 149 - S 14.90 - 16 65 115 83 133 48
MSDPH 150 - S 15.00 - 16 65 115 83 133 48
MSDPH 151 - S 15.10 - 16 65 115 83 133 48
MSDPH 152 - S 15.20 - 16 65 115 83 133 48
MSDPH 153 - S 15.30 - 16 65 115 83 133 48
MSDPH 154 - S 15.40 - 16 65 115 83 133 48
MSDPH 155 - S 15.50 - 16 65 115 83 133 48
MSDPH 156 - S 15.60 - 16 65 115 83 133 48
MSDPH 157 - S 15.70 - 16 65 115 83 133 48
MSDPH 158 - S 15.80 - 16 65 115 83 133 48
MSDPH 1587 - S 15.87 5/8 16 65 115 83 133 48
MSDPH 159 - S 15.90 - 16 65 115 83 133 48
MSDPH 160 - S 16.00 - 16 65 115 83 133 48
286 KORLOY
High precision results when machining deep holes
MLD Plus
Mach Long Solid Drill Plus
Special type
Code system
MLD 0600N 10 P 100L 10S

Mach Long Standard type Overall length
Solid Drill Plus Aspect ratio (L/D) 100L : 100 mm
(MLD Plus)
10D, 15D, 20D, 25D
Drill dia. (ØD) Special type Machining area Shank dia.

0600 : Ø6.00 mm Flute length P : Carbon steel, alloy steel 10S : Ø10 mm
(Two decimal place marked) 100 : 100 mm K : Cast iron
N : Aluminum, copper alloy
Chip pocket t
Features Excellent
chip evacuation
t Cutting edge and flute shape
- Straight cutting edge provides better rigidity
- Excellent chip evacuation due to wider chip pocket
and improved flute surface roughness t Double margin
t Cutting edge shape
- Double margin secures machining stability
t New grade (PC315G) Increased wear

resistance
- Ultra-fine substrate and new coating applied
- Lubricative coating layer improves chip evacuation with lower frictional resistance
- Longer tool life due to higher wear resistance
PC315G
Application area
t PC215G - Excellent performance when machining cast iron and alloy [ Degree of machining precision ]
steel at high speed t Improved machining precision
t PC315G - Universal grade excellent when machining carbon steel, - Bent holes reduced, Inside hole surface roughness improved
cast iron, etc. at middle to low cutting speed - Hole size uniformity increased
t Improved point shape
- Precise location secured Excellent

140 precision
120
100 Competitor MLD Plus
80 PC2
215G
15G
15G
G
PC31
15G
G
60
40
20
Workpiece
a b
P K N Reduced bent holes compared to competitors (a > b)
Carbon steel Gray cast iron Aluminum
KORLOY
Y 287
Drill
MSD Plus
MLD - (P/K
P/K/N) t50-&3"/$&
DATA Terminology P K N
PC215G
Grade FG2
PC315G
p.530
( Dia.)
Tolerance(drill h7
(
ØD Ød Point angle 135°
ℓ Twist angle 30°

Thinning X type
L
Coolant Through
P Steel K Cast iron N Non-ferrous metal
(mm)
10 P,M,K 15 P,M,K 20 P,M,K 25 P,M,K
Designation ØD Ød
ℓ L ℓ L ℓ L ℓ L
MLD 0300N - P,K,N 3.0 3 40 90 55 105 70 120 - -
MLD 0310N - P,K,N 3.1 4 45 100 60 125 80 140 - -
MLD 0320N - P,K,N 3.2 4 45 100 60 125 80 140 - -
MLD 0330N - P,K,N 3.3 4 45 100 60 125 80 140 - -
MLD 0340N - P,K,N 3.4 4 50 100 65 125 85 140 - -
MLD 0350N - P,K,N 3.5 4 50 100 65 125 85 140 - -
MLD 0360N - P,K,N 3.6 4 50 100 65 125 85 140 - -
MLD 0370N - P,K,N 3.7 4 50 100 65 125 85 140 - -
MLD 0380N - P,K,N 3.8 4 50 100 75 125 90 140 - -
MLD 0390N - P,K,N 3.9 4 50 100 75 125 90 140 - -
MLD 0400N - P,K,N 4.0 4 50 100 75 125 90 140 115 165
MLD 0410N - P,K,N 4.1 5 55 115 75 140 100 165 120 190
MLD 0420N - P,K,N 4.2 5 55 115 75 140 100 165 120 190
MLD 0430N - P,K,N 4.3 5 60 115 85 140 110 165 135 190
MLD 0440N - P,K,N 4.4 5 60 115 85 140 110 165 135 190
MLD 0450N - P,K,N 4.5 5 60 115 85 140 110 165 135 190
MLD 0460N - P,K,N 4.6 5 60 115 85 140 110 165 135 190
MLD 0470N - P,K,N 4.7 5 60 115 85 140 110 165 135 190
MLD 0480N - P,K,N 4.8 5 65 115 90 140 115 165 140 190
MLD 0490N - P,K,N 4.9 5 65 115 90 140 115 165 140 190
MLD 0500N - P,K,N 5 5 65 115 90 140 115 165 140 190
MLD 0510N - P,K,N 5.1 6 70 128 95 160 120 190 150 220
MLD 0520N - P,K,N 5.2 6 70 128 95 160 120 190 150 220
MLD 0530N - P,K,N 5.3 6 70 128 95 160 120 190 150 220
MLD 0540N - P,K,N 5.4 6 78 128 110 160 140 190 170 220
MLD 0550N - P,K,N 5.5 6 78 128 110 160 140 190 170 220
MLD 0560N - P,K,N 5.6 6 78 128 110 160 140 190 170 220
MLD 0570N - P,K,N 5.7 6 78 128 110 160 140 190 170 220
MLD 0580N - P,K,N 5.8 6 78 128 110 160 140 190 170 220
MLD 0590N - P,K,N 5.9 6 78 128 110 160 140 190 170 220
MLD 0600N - P,K,N 6 6 78 128 110 160 140 190 170 220
MLD 0610N - P,K,N 6.1 7 87 140 120 175 155 210 190 250
MLD 0620N - P,K,N 6.2 7 87 140 120 175 155 210 190 250
MLD 0630N - P,K,N 6.3 7 87 140 120 175 155 210 190 250
MLD 0640N - P,K,N 6.4 7 87 140 120 175 155 210 190 250
MLD 0650N - P,K,N 6.5 7 87 140 120 175 155 210 190 250
288 KORLOY
MLD - (P/K
P/K/N) t50-&3"/$&
DATA Terminology P K N
PC215G
Grade FG2
PC315G
p.530
( Dia.)
Tolerance(drill h7
(
ØD Ød Point angle 135°
ℓ Twist angle 30°

Thinning X type
L
Coolant Through
P Steel K Cast iron N Non-ferrous metal
(mm)
10 P,M,K 15 P,M,K 20 P,M,K 25 P,M,K
Designation ØD Ød
ℓ L ℓ L ℓ L ℓ L
MLD 0660N - P,K,N 6.6 7 87 140 120 175 155 210 190 250
MLD 0670N - P,K,N 6.7 7 87 140 120 175 155 210 190 250
MLD 0680N - P,K,N 6.8 7 90 140 125 175 160 210 200 250
MLD 0690N - P,K,N 6.9 7 90 140 125 175 160 210 200 250
MLD 0700N - P,K,N 7 7 90 140 125 175 160 210 200 250
MLD 0710N - P,K,N 7.1 8 100 155 135 195 170 230 - -
MLD 0720N - P,K,N 7.2 8 100 155 135 195 170 230 - -
MLD 0730N - P,K,N 7.3 8 100 155 135 195 170 230 - -
MLD 0740N - P,K,N 7.4 8 100 155 135 195 170 230 - -
MLD 0750N - P,K,N 7.5 8 100 155 135 195 170 230 - -
MLD 0760N - P,K,N 7.6 8 105 155 145 195 180 230 - -
MLD 0770N - P,K,N 7.7 8 105 155 145 195 180 230 - -
MLD 0780N - P,K,N 7.8 8 105 155 145 195 180 230 - -
MLD 0790N - P,K,N 7.9 8 105 155 145 195 180 230 - -
MLD 0800N - P,K,N 8 8 105 155 145 195 180 230 - -
MLD 0810N - P,K,N 8.1 9 110 165 155 210 195 260 - -
MLD 0820N - P,K,N 8.2 9 110 165 155 210 195 260 - -
MLD 0830N - P,K,N 8.3 9 110 165 155 210 195 260 - -
MLD 0840N - P,K,N 8.4 9 110 165 155 210 195 260 - -
MLD 0850N - P,K,N 8.5 9 110 165 155 210 195 260 - -
MLD 0860N - P,K,N 8.6 9 115 165 160 210 210 260 - -
MLD 0870N - P,K,N 8.7 9 115 165 160 210 210 260 - -
MLD 0880N - P,K,N 8.8 9 115 165 160 210 210 260 - -
MLD 0890N - P,K,N 8.9 9 115 165 160 210 210 260 - -
MLD 0900N - P,K,N 9 9 115 165 160 210 210 260 - -
MLD 0910N - P,K,N 9.1 10 125 190 170 240 - - - -
MLD 0920N - P,K,N 9.2 10 125 190 170 240 - - - -
MLD 0930N - P,K,N 9.3 10 125 190 170 240 - - - -
MLD 0940N - P,K,N 9.4 10 125 190 170 240 - - - -
MLD 0950N - P,K,N 9.5 10 125 190 170 240 - - - -
MLD 0960N - P,K,N 9.6 10 130 190 180 240 - - - -
MLD 0970N - P,K,N 9.7 10 130 190 180 240 - - - -
MLD 0980N - P,K,N 9.8 10 130 190 180 240 - - - -
MLD 0990N - P,K,N 9.9 10 130 190 180 240 - - - -
MLD 1000N - P,K,N 10 10 130 190 180 240 - - - -
KORLOY
Y 289
0QUJNJ[FEUPPMGPSIPMFNBLJOHPG$'31
MSD Plus CFRP

Mach Solid Drill Plus CFRP
t KORLOY’s new diamond coated grade ND2110 offers excellent wear resistance
t The optimal cutting edge reduces burrs.
Special type
Code system
MSDP 060 5 C 100L 6S

Mach Solid Standard type Overall length
Drill Plus Aspect ratio (L/D) 100L : 100 mm
Special type
Drill dia. (ØD) Flute length Machining area Shank dia.
060 : Ø6.0 mm 100 : 100 mm C : CFRP 6S : Ø6 mm
(One decimal place marked)
Features
t The cutting edge with a 2 step shape reduces the cutting load
t The optimal point angle of cutting edge reduces burrs
t Higher hardness of cutting edge increases wear resistance
ND2110
t Diamond coating specialized in CFRP machining t Inhibited burr creation by

t Diamond-coated substrate optimized for CFRP cutting keeping cutting edges in good shape
lnhibited flaking
High hardness diamond coating Diamond coating’s strong grip Less wear and flaking Fewer burrs on workpieces
maintains well-cut shapes to the substrate on the rake surface
33%
[ Test result ] more
Workpiece CFRP (Wing Tail)
Hole (ea)
Cutting length
Cutting conditions vc (m/min) = 100, fz (mm/t) = 0.05 10.8 m
Cutting length
7.2 m
ap (mm) = 10, Air 1080
Tools MSDP060-5C (ND2110) 720
MSDP-C Competitor
290 KORLOY
MSD
MSDP-5C t50-&3"/$&
DATA Terminology C
Grade ND2100
( Dia.)
Tolerance(drill m7
p.530
(
Point angle 118°
Thinning X type
ℓ Coolant External
L C CFRP
(mm)
5C
Designation ØD Ød
ℓ L
MSDP 030-5C 3.00 6 28 66
MSDP 040-5C 4.00 6 36 74
MSDP 0476-5C 4.76 6 44 82
MSDP 050-5C 5.00 6 44 82
MSDP 060-5C 6.00 6 44 82
MSDP 0635-5C 6.35 8 53 91
MSDP 070-5C 7.00 8 53 91
MSDP 0794-5C 7.94 8 53 91
MSDP 080-5C 8.00 8 53 91
MSDP 090-5C 9.00 10 61 103
MSDP 0952-5C 9.52 10 61 103
MSDP 100-5C 10.00 10 61 103
MSDP 110-5C 11.00 12 71 118
MSDP 1111-5C 11.11 12 71 118
MSDP 120-5C 12.00 12 71 118
MSDP 127-5C 12.70 14 71 124
KORLOY
Y 291
The best tool for ramped, curved or flat workpieces
MSFD
Mach Solid Flat Drill
t High quality hole making capability with 180°-point angle

t Improved anti chipping and welding resistance by edge honing and chamfering
Minimized creation of burrs compared to general drills
Special type
Code system
MSFD(H) 060 2 P 100L 6S

None: MSFD Aspect ratio (L/D) 100L : 100 mm
With oil holes: MSFDH 2D, 3D
Drill dia. (ØD) Special type Machining area Shank dia.

060 : Ø6.0 mm Flute length P : General - Carbon 6S : Ø6 mm
(One decimal place marked) 100 : 100 mm steel, alloy steel
R
Features
t Excellent straightness with its 180° - point angle when drilling 180°
on ramped surface
t Stronger resistance to chipping through corner chamfering
t Widened chip pockets by the use of ‘R’ shape on the thinning part
t Multi-functional capability - end milling

Endmill
Drill
Endmill + Drill
and drilling using a single MSFD TTool cost

reduction, Higher
productivityy
MSFD Conventional tools used and

their application
Performance evaluation Increased

wear resistance
Workpiece SM48C
Cutting conditions vc (m/min) = 80, fz (mm/min) = 0.10
Cutting length 7.2 m (600 holes)
Tools MSFD060-2P (PC325U)
MSFD Competitor
Prolongs tool life
292 KORLOY
MSFD-2P
SFD-2P t50-&3"/$&
DATA Terminology P
Grade PC325U
( Dia.)
Tolerance(drill H7
p.530
(
Point angle 180°
Twist angle 20°
Thinning R type
1
Coolant External
2
P Steel
(mm)
2P 2P
Designation ØD Ød ØD Ød
ℓ1 ℓ2 L ℓ1 ℓ2 L
MSFD 025-2P 2.5 4 10.5 11.5 50 MSFD 062-2P 6.2 8 26.0 27.0 70
MSFD 026-2P 2.6 4 10.9 11.9 50 MSFD 063-2P 6.3 8 26.5 27.5 70
MSFD 027-2P 2.7 4 11.3 12.3 50 MSFD 064-2P 6.4 8 26.9 27.9 70
MSFD 028-2P 2.8 4 11.8 12.8 50 MSFD 065-2P 6.5 8 27.3 28.3 70
MSFD 029-2P 2.9 4 12.2 13.2 50 MSFD 066-2P 6.6 8 27.7 28.7 70
MSFD 030-2P 3.0 6 12.6 13.6 50 MSFD 067-2P 6.7 8 28.1 29.1 70
MSFD 031-2P 3.1 6 13.0 14.0 50 MSFD 068-2P 6.8 8 28.6 29.6 70
MSFD 032-2P 3.2 6 13.4 14.4 50 MSFD 069-2P 6.9 8 29.0 30.0 70
MSFD 033-2P 3.3 6 13.9 14.9 50 MSFD 070-2P 7.0 8 29.4 30.4 70
MSFD 034-2P 3.4 6 14.3 15.3 50 MSFD 071-2P 7.1 8 29.8 30.8 70
MSFD 035-2P 3.5 6 14.7 15.7 50 MSFD 072-2P 7.2 8 30.2 31.2 70
MSFD 036-2P 3.6 6 15.1 16.1 50 MSFD 073-2P 7.3 8 30.7 31.7 70
MSFD 037-2P 3.7 6 15.5 16.5 50 MSFD 074-2P 7.4 8 31.1 32.1 70
MSFD 038-2P 3.8 6 16.0 17.0 50 MSFD 075-2P 7.5 8 31.5 32.5 70
MSFD 039-2P 3.9 6 16.4 17.4 50 MSFD 076-2P 7.6 8 31.9 32.9 70
MSFD 040-2P 4.0 6 16.8 17.8 50 MSFD 077-2P 7.7 8 32.3 33.3 70
MSFD 041-2P 4.1 6 17.2 18.2 60 MSFD 078-2P 7.8 8 32.8 33.8 70
MSFD 042-2P 4.2 6 17.6 18.6 60 MSFD 079-2P 7.9 8 33.2 34.2 70
MSFD 043-2P 4.3 6 18.1 19.1 60 MSFD 080-2P 8.0 8 33.6 34.6 70
MSFD 044-2P 4.4 6 18.5 19.5 60 MSFD 081-2P 8.1 10 34.0 35.0 80
MSFD 045-2P 4.5 6 18.9 19.9 60 MSFD 082-2P 8.2 10 34.4 35.4 80
MSFD 046-2P 4.6 6 19.3 20.3 60 MSFD 083-2P 8.3 10 34.9 35.9 80
MSFD 047-2P 4.7 6 19.7 20.7 60 MSFD 084-2P 8.4 10 35.3 36.3 80
MSFD 048-2P 4.8 6 20.2 21.2 60 MSFD 085-2P 8.5 10 35.7 36.7 80
MSFD 049-2P 4.9 6 20.6 21.6 60 MSFD 086-2P 8.6 10 36.1 37.1 80
MSFD 050-2P 5.0 6 21.0 22.0 60 MSFD 087-2P 8.7 10 36.5 37.5 80
MSFD 051-2P 5.1 6 21.4 22.4 60 MSFD 088-2P 8.8 10 37.0 38.0 80
MSFD 052-2P 5.2 6 21.8 22.8 60 MSFD 089-2P 8.9 10 37.4 38.4 80
MSFD 053-2P 5.3 6 22.3 23.3 60 MSFD 090-2P 9.0 10 37.8 38.8 80
MSFD 054-2P 5.4 6 22.7 23.7 60 MSFD 091-2P 9.1 10 38.2 39.2 80
MSFD 055-2P 5.5 6 23.1 24.1 60 MSFD 092-2P 9.2 10 38.6 39.6 80
MSFD 056-2P 5.6 6 23.5 24.5 60 MSFD 093-2P 9.3 10 39.1 40.1 80
MSFD 057-2P 5.7 6 23.9 24.9 60 MSFD 094-2P 9.4 10 39.5 40.5 80
MSFD 058-2P 5.8 6 24.4 25.4 60 MSFD 095-2P 9.5 10 39.9 40.9 80
MSFD 059-2P 5.9 6 24.8 25.8 60 MSFD 096-2P 9.6 10 40.3 41.3 80
MSFD 060-2P 6.0 6 25.2 26.2 60 MSFD 097-2P 9.7 10 40.7 41.7 80
MSFD 061-2P 6.1 8 25.6 26.6 70 MSFD 098-2P 9.8 10 41.2 42.2 80
KORLOY
Y 293
Drill
MSFD
MSFD-2P
SFD-2P t50-&3"/$&
DATA Terminology P
Grade PC325U
( Dia.)
Tolerance(drill H7
p.530
(
Point angle 180°
Twist angle 20°
Thinning R type
1
Coolant External
2
P Steel
(mm)
2P 2P
ØD Ød ØD Ød
MSFD 099-2P 9.9 10 41.6 42.6 80 MSFD 130-2P 13.0 14 54.6 55.6 100
MSFD 100-2P 10.0 10 42.0 43.0 80 MSFD 131-2P 13.1 14 55.0 56.0 100
MSFD 101-2P 10.1 12 42.4 43.4 90 MSFD 132-2P 13.2 14 55.4 56.4 100
MSFD 102-2P 10.2 12 42.8 43.8 90 MSFD 133-2P 13.3 14 55.9 56.9 100
MSFD 103-2P 10.3 12 43.3 44.3 90 MSFD 134-2P 13.4 14 56.3 57.3 100
MSFD 104-2P 10.4 12 43.7 44.7 90 MSFD 135-2P 13.5 14 56.7 57.7 110
MSFD 105-2P 10.5 12 44.1 45.1 90 MSFD 136-2P 13.6 14 57.1 58.1 110
MSFD 106-2P 10.6 12 44.5 45.5 90 MSFD 137-2P 13.7 14 57.5 58.5 110
MSFD 107-2P 10.7 12 44.9 45.9 90 MSFD 138-2P 13.8 14 58.0 59.0 110
MSFD 108-2P 10.8 12 45.4 46.4 90 MSFD 139-2P 13.9 14 58.4 59.4 110
MSFD 109-2P 10.9 12 45.8 46.8 90 MSFD 140-2P 14.0 14 58.8 59.8 110
MSFD 110-2P 11.0 12 46.2 47.2 90 MSFD 141-2P 14.1 16 59.2 60.2 110
MSFD 111-2P 11.1 12 46.6 47.6 90 MSFD 142-2P 14.2 16 59.6 60.6 110
MSFD 112-2P 11.2 12 47.0 48.0 90 MSFD 143-2P 14.3 16 60.1 61.1 110
MSFD 113-2P 11.3 12 47.5 48.5 90 MSFD 144-2P 14.4 16 60.5 61.5 110
MSFD 114-2P 11.4 12 47.9 48.9 90 MSFD 145-2P 14.5 16 60.9 61.9 110
MSFD 115-2P 11.5 12 48.3 49.3 90 MSFD 146-2P 14.6 16 61.3 62.3 110
MSFD 116-2P 11.6 12 48.7 49.7 90 MSFD 147-2P 14.7 16 61.7 62.7 110
MSFD 117-2P 11.7 12 49.1 50.1 90 MSFD 148-2P 14.8 16 62.2 63.2 110
MSFD 118-2P 11.8 12 49.6 50.6 90 MSFD 149-2P 14.9 16 62.6 63.6 110
MSFD 119-2P 11.9 12 50.0 51.0 90 MSFD 150-2P 15.0 16 63.0 64.0 110
MSFD 120-2P 12.0 12 50.4 51.4 90 MSFD 151-2P 15.1 16 65.0 66.0 115
MSFD 121-2P 12.1 14 50.8 51.8 100 MSFD 152-2P 15.2 16 65.0 66.0 115
MSFD 122-2P 12.2 14 51.2 52.2 100 MSFD 153-2P 15.3 16 65.1 66.1 115
MSFD 123-2P 12.3 14 51.7 52.7 100 MSFD 154-2P 15.4 16 65.1 66.1 115
MSFD 124-2P 12.4 14 52.1 53.1 100 MSFD 155-2P 15.5 16 65.1 66.1 115
MSFD 125-2P 12.5 14 52.5 53.5 100 MSFD 156-2P 15.6 16 67.1 68.1 115
MSFD 126-2P 12.6 14 52.9 53.9 100 MSFD 157-2P 15.7 16 67.1 68.1 115
MSFD 127-2P 12.7 14 53.3 54.3 100 MSFD 158-2P 15.8 16 67.2 68.2 115
MSFD 128-2P 12.8 14 53.8 54.8 100 MSFD 159-2P 15.9 16 67.2 68.2 115
MSFD 129-2P 12.9 14 54.2 55.2 100 MSFD 160-2P 16.0 16 67.2 68.2 115
294 KORLOY
MSFDH-3P
FDH-3P t50-&3"/$&
DATA Terminology P
Grade PC325U
( Dia.)
Tolerance(drill H7
p.530
(
Point angle 180°
Twist angle 30°
Thinning R type
1
Coolant Through
2
P Steel
3P 3P
Designation ØD Ød ØD Ød
MSFDH 025-3P 2.5 3 17 18 58 MSFDH 062-3P 6.2 8 34 35 79
MSFDH 026-3P 2.6 3 17 18 58 MSFDH 063-3P 6.3 8 34 35 79
MSFDH 027-3P 2.7 3 17 18 58 MSFDH 064-3P 6.4 8 34 35 79
MSFDH 028-3P 2.8 3 17 18 58 MSFDH 065-3P 6.5 8 34 35 79
MSFDH 029-3P 2.9 3 17 18 58 MSFDH 066-3P 6.6 8 34 35 79
MSFDH 030-3P 3.0 6 20 21 62 MSFDH 067-3P 6.7 8 34 35 79
MSFDH 031-3P 3.1 6 20 21 62 MSFDH 068-3P 6.8 8 34 35 79
MSFDH 032-3P 3.2 6 20 21 62 MSFDH 069-3P 6.9 8 34 35 79
MSFDH 033-3P 3.3 6 20 21 62 MSFDH 070-3P 7.0 8 34 35 79
MSFDH 034-3P 3.4 6 20 21 62 MSFDH 071-3P 7.1 8 41 42 79
MSFDH 035-3P 3.5 6 20 21 62 MSFDH 072-3P 7.2 8 41 42 79
MSFDH 036-3P 3.6 6 20 21 62 MSFDH 073-3P 7.3 8 41 42 79
MSFDH 037-3P 3.7 6 20 21 62 MSFDH 074-3P 7.4 8 41 42 79
MSFDH 038-3P 3.8 6 24 25 66 MSFDH 075-3P 7.5 8 41 42 79
MSFDH 039-3P 3.9 6 24 25 66 MSFDH 076-3P 7.6 8 41 42 79
MSFDH 040-3P 4.0 6 24 25 66 MSFDH 077-3P 7.7 8 41 42 79
MSFDH 041-3P 4.1 6 24 25 66 MSFDH 078-3P 7.8 8 41 42 79
MSFDH 042-3P 4.2 6 24 25 66 MSFDH 079-3P 7.9 8 41 42 79
MSFDH 043-3P 4.3 6 24 25 66 MSFDH 080-3P 8.0 8 41 42 79
MSFDH 044-3P 4.4 6 24 25 66 MSFDH 081-3P 8.1 10 47 48 89
MSFDH 045-3P 4.5 6 24 25 66 MSFDH 082-3P 8.2 10 47 48 89
MSFDH 046-3P 4.6 6 24 25 66 MSFDH 083-3P 8.3 10 47 48 89
MSFDH 047-3P 4.7 6 24 25 66 MSFDH 084-3P 8.4 10 47 48 89
MSFDH 048-3P 4.8 6 28 29 66 MSFDH 085-3P 8.5 10 47 48 89
MSFDH 049-3P 4.9 6 28 29 66 MSFDH 086-3P 8.6 10 47 48 89
MSFDH 050-3P 5.0 6 28 29 66 MSFDH 087-3P 8.7 10 47 48 89
MSFDH 051-3P 5.1 6 28 29 66 MSFDH 088-3P 8.8 10 47 48 89
MSFDH 052-3P 5.2 6 28 29 66 MSFDH 089-3P 8.9 10 47 48 89
MSFDH 053-3P 5.3 6 28 29 66 MSFDH 090-3P 9.0 10 47 48 89
MSFDH 054-3P 5.4 6 28 29 66 MSFDH 091-3P 9.1 10 47 48 89
MSFDH 055-3P 5.5 6 28 29 66 MSFDH 092-3P 9.2 10 47 48 89
MSFDH 056-3P 5.6 6 28 29 66 MSFDH 093-3P 9.3 10 47 48 89
MSFDH 057-3P 5.7 6 28 29 66 MSFDH 094-3P 9.4 10 47 48 89
MSFDH 058-3P 5.8 6 28 29 66 MSFDH 095-3P 9.5 10 47 48 89
MSFDH 059-3P 5.9 6 28 29 66 MSFDH 096-3P 9.6 10 47 48 89
MSFDH 060-3P 6.0 6 28 29 66 MSFDH 097-3P 9.7 10 47 48 89
MSFDH 061-3P 6.1 8 34 35 79 MSFDH 098-3P 9.8 10 47 48 89
KORLOY
Y 295
Drill
MSFD
MSFDH-3P
FDH-3P t50-&3"/$&
DATA Terminology P
Grade PC325U
( Dia.)
Tolerance(drill H7
p.530
(
Point angle 180°
Twist angle 30°
Thinning R type
1
Coolant Through
2
P Steel
(mm)
3P 3P
ØD Ød ØD Ød
MSFDH 099-3P 9.9 10 47 48 89 MSFDH 130-3P 13.0 14 60 61 107
MSFDH 100-3P 10.0 10 47 48 89 MSFDH 131-3P 13.1 14 60 61 107
MSFDH 101-3P 10.1 12 55 56 102 MSFDH 132-3P 13.2 14 60 61 107
MSFDH 102-3P 10.2 12 55 56 102 MSFDH 133-3P 13.3 14 60 61 107
MSFDH 103-3P 10.3 12 55 56 102 MSFDH 134-3P 13.4 14 60 61 107
MSFDH 104-3P 10.4 12 55 56 102 MSFDH 135-3P 13.5 14 60 61 107
MSFDH 105-3P 10.5 12 55 56 102 MSFDH 136-3P 13.6 14 60 61 107
MSFDH 106-3P 10.6 12 55 56 102 MSFDH 137-3P 13.7 14 60 61 107
MSFDH 107-3P 10.7 12 55 56 102 MSFDH 138-3P 13.8 14 60 61 107
MSFDH 108-3P 10.8 12 55 56 102 MSFDH 139-3P 13.9 14 60 61 107
MSFDH 109-3P 10.9 12 55 56 102 MSFDH 140-3P 14.0 14 60 61 107
MSFDH 110-3P 11.0 12 55 56 102 MSFDH 141-3P 14.1 16 65 66 115
MSFDH 111-3P 11.1 12 55 56 102 MSFDH 142-3P 14.2 16 65 66 115
MSFDH 112-3P 11.2 12 55 56 102 MSFDH 143-3P 14.3 16 65 66 115
MSFDH 113-3P 11.3 12 55 56 102 MSFDH 144-3P 14.4 16 65 66 115
MSFDH 114-3P 11.4 12 55 56 102 MSFDH 145-3P 14.5 16 65 66 115
MSFDH 115-3P 11.5 12 55 56 102 MSFDH 146-3P 14.6 16 65 66 115
MSFDH 116-3P 11.6 12 55 56 102 MSFDH 147-3P 14.7 16 65 66 115
MSFDH 117-3P 11.7 12 55 56 102 MSFDH 148-3P 14.8 16 65 66 115
MSFDH 118-3P 11.8 12 55 56 102 MSFDH 149-3P 14.9 16 65 66 115
MSFDH 119-3P 11.9 12 55 56 102 MSFDH 150-3P 15.0 16 65 66 115
MSFDH 120-3P 12.0 12 55 56 102 MSFDH 151-3P 15.1 16 65 66 115
MSFDH 121-3P 12.1 14 60 61 107 MSFDH 152-3P 15.2 16 65 66 115
MSFDH 122-3P 12.2 14 60 61 107 MSFDH 153-3P 15.3 16 65 66 115
MSFDH 123-3P 12.3 14 60 61 107 MSFDH 154-3P 15.4 16 65 66 115
MSFDH 124-3P 12.4 14 60 61 107 MSFDH 155-3P 15.5 16 65 66 115
MSFDH 125-3P 12.5 14 60 61 107 MSFDH 156-3P 15.6 16 65 66 115
MSFDH 126-3P 12.6 14 60 61 107 MSFDH 157-3P 15.7 16 65 66 115
MSFDH 127-3P 12.7 14 60 61 107 MSFDH 158-3P 15.8 16 65 66 115
MSFDH 128-3P 12.8 14 60 61 107 MSFDH 159-3P 15.9 16 65 66 115
MSFDH 129-3P 12.9 14 60 61 107 MSFDH 160-3P 16.0 16 65 66 115
296 KORLOY
General use Drill with DIN standard
P-Star Drill
DIN standardized drill suitable for (~HRC50) high speed machining
t Applicable for high speed and high feed machining with high toughness substrate
t Enhanced surface hardness and heat resistance with new coating implementation
t Internal coolant types are also available with improved machinability and reduced friction heat
Features
Features of drill
t Excellent straightness with its 180° - point
angle when drilling on ramped surface
t Stronger resistance to chipping through
corner chamfering
t Widened chip pockets by the use of ‘R’ shape
on the thinning part
Features of substrate/grade Application area

t Enhanced surface hardness and heat resistance with

150
TiAlN coating implementation
t Excellent chipping resistance in high speed and high 100
feed machining with high toughness substrate
t Applicable for various workpieces such as alloy steel, 50
cast iron, stainless steel and pre-hardened steel

0 Workpiece
t Recommended for (~HRC50) high speed cutting
P P K K M
Ca
Al
Gr
Du
St
loy
ay
ain
rb
cti
on
le
ca
les
St
ee
ca
st
St
ss
ee
st
iro
te
l
iro
n
el
n
Code system
P I 5 05 A 040
P-Star Drill Appearance Grade Drilling depth Shank type Cutting dia.
P : P-Star Drill F : Facet Point 5 : Grade 03 : 3×D A : Plane 3 ~ 20 mm
S : Spiral Coolant I : Internal Coolant 05 : 5×D F : DIN 6535 HE
HP : High Precision 08 : 8×D
10 : 10×D
20 : 20×D
KORLOY
Y 297
Drill
P-Star Drill
&%1/0 Feature Length Diameter range (Ø)
Internal Margin Tolerance
INCH : ◆ Flutes
Relief Facet 3×D 5×D 8×D 10×D 20×D Coolant Type D Min. Max.
METRIC : ◇
◆◇ 2 ○ ○ Double m7 3 16
HPI503 ◇ 2 ○ ○ ○ Double m7 3 20
HPI505 ◆◇ 2 ○ ○ ○ Double m7 3 20
HPI508-N ◆◇ 2 ○ ○ ○ Double m7 3 20
P503A(F) ◇ 2 ○ ○ Single m7 3 20
PI503A(F ◇ 2 ○ ○ ○ Single m7 3 20
PI505A(F) ◇ 2 ○ ○ ○ Single m7 4 20
&%1/0 Appearance Type Drills dia. Page
Double margin drill - 3×D Ø3.0 ~ Ø16.0 299~300
HPI503 Double margin internal coolant drill - 3×D Ø3.0 ~ Ø20.0 301~303
HPI505 Double margin internal coolant drill - 5×D Ø3.0 ~ Ø20.0 304~306
HPI508-N Double margin internal coolant drill - 8×D Ø3.0 ~ Ø20.0 307~308
P503A(F) Din 6537k type drill Ø3.0 ~ Ø20.0 309~310
PI503A(F) Din 6537K type internal coolant drill Ø3.0 ~ Ø20.0 311~312
PI505A(F) Din 6537K type internal coolant drill Ø4.0 ~ Ø20.0 313~314
298 KORLOY
HP50
P503 Double margin drill - 3×D
t50-&3"/$&
DATA ØD Ød
DIN ULTRA 30 Ø3
6537K FINE 3×D Ø3.1 ~ Ø6
+0.012 ~ +0.002mm
+0.016 ~ +0.004mm
HELIX 140 Ø6.1 ~ Ø10 +0.021 ~ +0.006mm
h6
p.531 Ø10.1 ~ Ø16 +0.025 ~ +0.007mm
140˚
(mm)
ØD ØD
Ød ℓ L Designation Ød ℓ L
mm inch mm inch
HP503 030 3 0.1181 6 20 62 HP503 067 6.7 0.2638 8 34 79
HP503 031 3.1 0.1220 6 20 62 HP503 068 6.8 0.2677 8 34 79
HP503 032 3.2 0.1260 6 20 62 HP503 069 6.9 0.2717 8 34 79
HP503 033 3.3 0.1299 6 20 62 HP503 070 7 0.2756 8 34 79
HP503 034 3.4 0.1339 6 20 62 HP503 071 7.1 0.2795 8 41 79
HP503 035 3.5 0.1378 6 20 62 HP503 072 7.2 0.2835 8 41 79
HP503 036 3.6 0.1417 6 20 62 HP503 073 7.3 0.2874 8 41 79
HP503 037 3.7 0.1457 6 20 62 HP503 074 7.4 0.2913 8 41 79
HP503 038 3.8 0.1496 6 24 66 HP503 075 7.5 0.2953 8 41 79
HP503 039 3.9 0.1535 6 24 66 HP503 076 7.6 0.2992 8 41 79
HP503 040 4 0.1575 6 24 66 HP503 077 7.7 0.3031 8 41 79
HP503 041 4.1 0.1614 6 24 66 HP503 078 7.8 0.3071 8 41 79
HP503 042 4.2 0.1654 6 24 66 HP503 079 7.9 0.3110 8 41 79
HP503 043 4.3 0.1693 6 24 66 HP503 080 8 0.3150 8 41 79
HP503 044 4.4 0.1732 6 24 66 HP503 081 8.1 0.3189 10 47 89
HP503 045 4.5 0.1772 6 24 66 HP503 082 8.2 0.3228 10 47 89
HP503 046 4.6 0.1811 6 24 66 HP503 083 8.3 0.3268 10 47 89
HP503 047 4.7 0.1850 6 24 66 HP503 084 8.4 0.3307 10 47 89
HP503 048 4.8 0.1890 6 28 66 HP503 085 8.5 0.3346 10 47 89
HP503 049 4.9 0.1929 6 28 66 HP503 086 8.6 0.3386 10 47 89
HP503 050 5 0.1969 6 28 66 HP503 087 8.7 0.3425 10 47 89
HP503 051 5.1 0.2008 6 28 66 HP503 088 8.8 0.3465 10 47 89
HP503 052 5.2 0.2047 6 28 66 HP503 089 8.9 0.3504 10 47 89
HP503 053 5.3 0.2087 6 28 66 HP503 090 9 0.3543 10 47 89
HP503 054 5.4 0.2126 6 28 66 HP503 091 9.1 0.3583 10 47 89
HP503 055 5.5 0.2165 6 28 66 HP503 092 9.2 0.3622 10 47 89
HP503 056 5.6 0.2205 6 28 66 HP503 093 9.3 0.3661 10 47 89
HP503 057 5.7 0.2244 6 28 66 HP503 094 9.4 0.3701 10 47 89
HP503 058 5.8 0.2283 6 28 66 HP503 095 9.5 0.3740 10 47 89
HP503 059 5.9 0.2322 6 28 66 HP503 096 9.6 0.3780 10 47 89
HP503 060 6 0.2362 6 28 66 HP503 097 9.7 0.3819 10 47 89
HP503 061 6.1 0.2402 8 34 79 HP503 098 9.8 0.3858 10 47 89
HP503 062 6.2 0.2441 8 34 79 HP503 099 9.9 0.3898 10 47 89
HP503 063 6.3 0.2480 8 34 79 HP503 100 10 0.3937 10 47 89
HP503 064 6.4 0.2520 8 34 79 HP503 101 10.1 0.3976 12 55 102
HP503 065 6.5 0.2559 8 34 79 HP503 102 10.2 0.4016 12 55 102
HP503 066 6.6 0.2598 8 34 79 HP503 103 10.3 0.4055 12 55 102
KORLOY
Y 299
Drill
P-Star Drill
HP50
P503 Double margin drill - 3×D
t50-&3"/$&
DATA ØD Ød
DIN ULTRA 30 Ø3
6537K FINE 3×D Ø3.1 ~ Ø6
+0.012 ~ +0.002mm
+0.016 ~ +0.004mm
HELIX 140 Ø6.1 ~ Ø10 +0.021 ~ +0.006mm
h6
p.531 Ø10.1 ~ Ø16 +0.025 ~ +0.007mm
140˚
(mm)
ØD ØD
Ød ℓ L Ød ℓ L
mm inch mm inch
HP503 104 10.4 0.4094 12 55 102 HP503 125 12.5 0.4921 14 60 107
HP503 105 10.5 0.4134 12 55 102 HP503 126 12.6 0.4961 14 60 107
HP503 106 10.6 0.4173 12 55 102 HP503 127 12.7 0.5000 14 60 107
HP503 107 10.7 0.4213 12 55 102 HP503 128 12.8 0.5039 14 60 107
HP503 108 10.8 0.4252 12 55 102 HP503 129 12.9 0.5079 14 60 107
HP503 109 10.9 0.4291 12 55 102 HP503 130 13 0.5118 14 60 107
HP503 110 11 0.4331 12 55 102 HP503 131 13.1 0.5157 14 60 107
HP503 111 11.1 0.4370 12 55 102 HP503 132 13.2 0.5157 14 60 107
HP503 112 11.2 0.4409 12 55 102 HP503 133 13.3 0.5236 14 60 107
HP503 113 11.3 0.4449 12 55 102 HP503 135 13.5 0.5315 14 60 107
HP503 114 11.4 0.4488 12 55 102 HP503 137 13.7 0.5394 14 60 107
HP503 115 11.5 0.4528 12 55 102 HP503 140 14 0.5512 14 60 107
HP503 116 11.6 0.4567 12 55 102 HP503 142 14.2 0.5591 16 65 115
HP503 117 11.7 0.4606 12 55 102 HP503 143 14.3 0.5630 16 65 115
HP503 118 11.8 0.4646 12 55 102 HP503 145 14.5 0.5709 16 65 115
HP503 119 11.9 0.4685 12 55 102 HP503 146 14.6 0.5787 16 65 115
HP503 120 12 0.4724 12 55 102 HP503 148 14.8 0.5827 16 65 115
HP503 121 12.1 0.4764 14 60 107 HP503 150 15 0.5906 16 65 115
HP503 122 12.2 0.4803 14 60 107 HP503 155 15.5 0.6102 16 65 115
HP503 123 12.3 0.4843 14 60 107 HP503 157 15.7 0.6181 16 65 115
HP503 124 12.4 0.4882 14 60 107 HP503 160 16 0.6299 16 65 115
Carbon steel Alloy Steel Pre-hardened steel Hardened steel Cast iron
○ ◎ ◎ ○ ○ ◎ ○
300 KORLOY
HPI5
PI503 Double margin internal coolant drill - 3×D
t50-&3"/$&
DATA ØD Ød
DIN ULTRA 30 Ø3
6537K FINE 3×D Ø3.1 ~ Ø6
+0.012 ~ +0.002mm
+0.016 ~ +0.004mm
HELIX 140 Ø6.1 ~ Ø10 +0.021 ~ +0.006mm h6
p.531 Ø10.1 ~ Ø18 +0.025 ~ +0.007mm
Ø18.1 ~ +0.029 ~ +0.008mm
140˚
(mm)
ØD ØD
Designation Ød ℓ L Designation Ød ℓ L
mm fraction inch mm fraction inch
HPI503 030 3 - 0.1181 6 20 62 HPI503 056 5.6 - 0.2205 6 28 66
HPI503 031 3.1 - 0.1120 6 20 62 HPI503 057 5.7 - 0.2244 6 28 66
HPI503 03175 3.175 1/8 0.1250 6 20 62 HPI503 058 5.8 - 0.2283 6 28 66
HPI503 032 3.2 - 0.1260 6 20 62 HPI503 059 5.9 - 0.2323 6 28 66
HPI503 03264 3.264 - 0.1285 6 20 62 HPI503 05953 5.953 15/64 0.2344 6 28 66
HPI503 033 3.3 - 0.1299 6 20 62 HPI503 060 6 - 0.2362 6 28 66
HPI503 034 3.4 - 0.1339 6 20 62 HPI503 061 6.1 - 0.2402 8 34 79
HPI503 035 3.5 - 0.1378 6 20 62 HPI503 062 6.2 - 0.2441 8 34 79
HPI503 03572 3.572 9/64 0.1406 6 20 62 HPI503 063 6.3 - 0.2480 8 34 79
HPI503 036 3.6 - 0.1417 6 20 62 HPI503 0635 6.35 1/4 0.2500 8 34 79
HPI503 037 3.7 - 0.1457 6 20 62 HPI503 064 6.4 - 0.2520 8 34 79
HPI503 038 3.8 - 0.1496 6 24 66 HPI503 065 6.5 - 0.2559 8 34 79
HPI503 039 3.9 - 0.1535 6 24 66 HPI503 066 6.6 - 0.2598 8 34 79
HPI503 0397 3.97 5/32 0.1563 6 24 66 HPI503 067 6.7 - 0.2638 8 34 79
HPI503 040 4 - 0.1575 6 24 66 HPI503 06747 6.747 17/64 0.2656 8 34 79
HPI503 04039 4.039 - 0.1590 6 24 66 HPI503 068 6.8 - 0.2677 8 34 79
HPI503 041 4.1 - 0.1614 6 24 66 HPI503 069 6.9 - 0.2717 8 34 79
HPI503 042 4.2 - 0.1654 6 24 66 HPI503 070 7 - 0.2756 8 34 79
HPI503 043 4.3 - 0.1693 6 24 66 HPI503 071 7.1 - 0.2795 8 41 79
HPI503 04366 4.366 - 0.1719 6 24 66 HPI503 07145 7.145 9/32 0.2813 8 41 79
HPI503 044 4.4 - 0.1732 6 24 66 HPI503 072 7.2 - 0.2835 8 41 79
HPI503 045 4.5 - 0.1772 6 24 66 HPI503 073 7.3 - 0.2874 8 41 79
HPI503 046 4.6 - 0.1811 6 24 66 HPI503 074 7.4 - 0.2913 8 41 79
HPI503 047 4.7 - 0.1850 6 24 66 HPI503 075 7.5 - 0.2953 8 41 79
HPI503 04763 4.763 3/16 0.1875 6 28 66 HPI503 07541 7.541 19/64 0.2969 8 41 79
HPI503 048 4.8 - 0.1890 6 28 66 HPI503 076 7.6 - 0.2992 8 41 79
HPI503 049 4.9 - 0.1929 6 28 66 HPI503 077 7.7 - 0.3031 8 41 79
HPI503 050 5 - 0.1969 6 28 66 HPI503 078 7.8 - 0.0371 8 41 79
HPI503 051 5.1 - 0.2008 6 28 66 HPI503 079 7.9 - 0.3110 8 41 79
HPI503 05159 5.159 13/64 0.2031 6 28 66 HPI503 07938 7.938 5/16 0.3125 8 41 79
HPI503 052 5.2 - 0.2047 6 28 66 HPI503 080 8 - 0.3150 8 41 79
HPI503 053 5.3 - 0.2087 6 28 66 HPI503 081 8.1 - 0.3189 10 47 89
HPI503 054 5.4 - 0.2126 6 28 66 HPI503 082 8.2 - 0.3228 10 47 89
HPI503 055 5.5 - 0.2165 6 28 66 HPI503 083 8.3 - 0.3268 10 47 89
HPI503 05558 5.558 7/32 0.2188 6 28 66 HPI503 08334 8.334 21/64 0.3281 10 47 89
KORLOY
Y 301
Drill
P-Star Drill
HPI5
t50-&3"/$&
DATA ØD Ød
DIN ULTRA 30 Ø3
6537K FINE 3×D Ø3.1 ~ Ø6
+0.012 ~ +0.002mm
+0.016 ~ +0.004mm
HELIX 140 Ø6.1 ~ Ø10 +0.021 ~ +0.006mm h6
p.531 Ø10.1 ~ Ø18 +0.025 ~ +0.007mm
Ø18.1 ~ +0.029 ~ +0.008mm
140˚
(mm)
ØD ØD
HPI503 0834 8.34 - 0.3283 10 47 89 HPI503 11113 11.113 7/16 0.4375 12 55 105
HPI503 084 8.4 - 0.3307 10 47 89 HPI503 112 11.2 - 0.4409 12 55 105
HPI503 085 8.5 - 0.3346 10 47 89 HPI503 113 11.3 - 0.4449 12 55 105
HPI503 086 8.6 - 0.3386 10 47 89 HPI503 114 11.4 - 0.4488 12 55 105
HPI503 087 8.7 - 0.3425 10 47 89 HPI503 115 11.5 - 0.4528 12 55 105
HPI503 08733 8.733 11/32 0.3438 10 47 89 HPI503 11509 11.509 29/64 0.4531 12 55 105
HPI503 088 8.8 - 0.3465 10 47 89 HPI503 116 11.6 - 0.4567 12 55 105
HPI503 089 8.9 - 0.6504 10 47 89 HPI503 117 11.7 - 0.4606 12 55 105
HPI503 090 9 - 0.3543 10 47 89 HPI503 118 11.8 - 0.4646 12 55 105
HPI503 091 9.1 - 0.3583 10 47 89 HPI503 119 11.9 - 0.4685 12 55 105
HPI503 09129 9.129 23/64 0.3594 10 47 89 HPI503 11908 11.908 15/32 0.4688 12 55 105
HPI503 092 9.2 - 0.3622 10 47 89 HPI503 120 12 - 0.4724 12 55 105
HPI503 093 9.3 - 0.3661 10 47 89 HPI503 121 12.1 - 0.4764 14 60 107
HPI503 094 9.4 - 0.3680 10 47 89 HPI503 122 12.2 - 0.4803 14 60 107
HPI503 095 9.5 - 0.3740 10 47 89 HPI503 123 12.3 - 0.4843 14 60 107
HPI503 09525 9.525 3/8 0.3750 10 47 89 HPI503 12304 12.304 31/64 0.4844 14 60 107
HPI503 096 9.6 - 0.3780 10 47 89 HPI503 124 12.4 - 0.4882 14 60 107
HPI503 097 9.7 - 0.3819 10 47 89 HPI503 125 12.5 - 0.4921 14 60 107
HPI503 098 9.8 - 0.3858 10 47 89 HPI503 126 12.6 - 0.4961 14 60 107
HPI503 099 9.9 - 0.3898 10 47 89 HPI503 127 12.7 1/2 0.5000 14 60 107
HPI503 09921 9.9921 25/64 0.3906 10 47 89 HPI503 128 12.8 - 0.5039 14 60 107
HPI503 100 10 - 0.3937 10 47 89 HPI503 129 12.9 - 0.5079 14 60 107
HPI503 101 10.1 - 0.3976 12 55 105 HPI503 130 13 - 0.5118 14 60 107
HPI503 102 10.2 - 0.4016 12 55 105 HPI503 132 13.2 - 0.5197 14 60 107
HPI503 103 10.3 - 0.4055 12 55 105 HPI503 133 13.3 - 0.5236 14 60 107
HPI503 1032 10.32 13/32 0.4063 12 55 105 HPI503 13494 13.494 17/32 0.5313 14 60 107
HPI503 104 10.4 - 0.4094 12 55 105 HPI503 135 13.5 - 0.5315 14 60 107
HPI503 105 10.5 - 0.4134 12 55 105 HPI503 137 13.7 - 0.5394 14 60 107
HPI503 106 10.6 - 0.4173 12 55 105 HPI503 13891 13.891 35/64 0.5469 14 60 107
HPI503 107 10.7 - 0.4213 12 55 105 HPI503 140 14 - 0.5512 14 60 107
HPI503 10716 10.716 27/64 0.4219 12 55 105 HPI503 141 14.1 - 0.5551 16 65 115
HPI503 108 10.8 - 0.4252 12 55 105 HPI503 142 14.2 - 0.5591 16 65 115
HPI503 109 10.9 - 0.4291 12 55 105 HPI503 14288 14.288 9/16 0.5625 16 65 115
HPI503 110 11 - 0.4331 12 55 105 HPI503 145 14.5 - 0.5709 16 65 115
HPI503 111 11.1 - 0.4370 12 55 105 HPI503 146 14.6 - 0.5746 16 65 115
302 KORLOY
HPI5
t50-&3"/$&
DATA ØD Ød
DIN ULTRA 30 Ø3
6537K FINE 3×D Ø3.1 ~ Ø6
+0.012 ~ +0.002mm
+0.016 ~ +0.004mm
HELIX 140 Ø6.1 ~ Ø10 +0.021 ~ +0.006mm h6
p.531 Ø10.1 ~ Ø18 +0.025 ~ +0.007mm
Ø18.1 ~ +0.029 ~ +0.008mm
140˚
(mm)
ØD ØD
HPI503 147 14.7 - 0.5787 16 65 115 HPI503 168 16.8 - 0.6614 18 73 123
HPI503 150 15 - 0.5906 16 65 115 HPI503 170 17 - 0.6693 18 73 123
HPI503 15081 15.081 19/32 0.5937 16 65 115 HPI503 171 17.1 - 0.6732 18 73 123
HPI503 155 15.5 - 0.6102 16 65 115 HPI503 17463 17.463 11/16 0.6875 18 73 123
HPI503 157 15.7 - 0.6181 16 65 115 HPI503 175 17.5 - 0.6890 18 73 123
HPI503 158 15.8 - 0.6220 16 65 115 HPI503 180 18 - 0.7087 18 73 123
HPI503 15875 15.875 5/8 0.6250 16 65 115 HPI503 185 18.5 - 0.7883 20 79 131
HPI503 160 16 - 0.6299 16 65 115 HPI503 190 19 - 0.7480 20 79 131
HPI503 162 16.2 - 0.6378 18 73 123 HPI503 1905 19.05 3/4 0.7500 20 79 131
HPI503 163 16.3 - 0.6417 18 73 123 HPI503 197 19.7 - 0.7756 20 79 131
HPI503 165 16.5 - 0.6496 18 73 123 HPI503 200 20 - 0.7874 20 79 131
HPI503 167 16.7 - 0.6575 18 73 123
○ ◎ ◎ ○ ○ ◎ ○
KORLOY
Y 303
Drill
P-Star Drill
HPI5
t50-&3"/$&
DATA ØD Ød
DIN ULTRA 30 Ø3
6537K FINE 5×D Ø3.1 ~ Ø6
+0.012 ~ +0.002mm
+0.016 ~ +0.004mm
HELIX 140 Ø6.1 ~ Ø10 +0.021 ~ +0.006mm h6
p.531 Ø10.1 ~ Ø18 +0.025 ~ +0.007mm
Ø18.1 ~ +0.029 ~ +0.008mm
140˚
(mm)
ØD ØD
HPI505 030 3 - 0.1181 6 30 66 HPI505 05558 5.558 7/32 0.2188 6 44 82
HPI505 031 3.1 - 0.1120 6 30 66 HPI505 056 5.6 - 0.2205 6 44 82
HPI505 03175 3.175 - 0.1250 6 30 66 HPI505 057 5.7 - 0.2244 6 44 82
HPI505 032 3.2 - 0.1260 6 30 66 HPI505 058 5.8 - 0.2283 6 44 82
HPI505 03264 3.264 1/8 0.1285 6 30 66 HPI505 059 5.9 - 0.2323 6 44 82
HPI505 033 3.3 - 0.1299 6 30 66 HPI505 05953 5.953 15/64 0.2344 6 44 82
HPI505 034 3.4 - 0.1339 6 30 66 HPI505 060 6 - 0.2362 6 44 82
HPI505 035 3.5 - 0.1378 6 30 66 HPI505 061 6.1 - 0.2402 8 53 91
HPI505 03572 3.572 9/64 0.1406 6 30 66 HPI505 062 6.2 - 0.2441 8 53 91
HPI505 036 3.6 - 0.1417 6 30 66 HPI505 063 6.3 - 0.2480 8 53 91
HPI505 037 3.7 - 0.1457 6 30 66 HPI505 0635 6.35 1/4 0.2500 8 53 91
HPI505 038 3.8 - 0.1496 6 36 74 HPI505 064 6.4 - 0.2520 8 53 91
HPI505 039 3.9 - 0.1535 6 36 74 HPI505 065 6.5 - 0.2559 8 53 91
HPI505 0397 3.97 5/32 0.1563 6 36 74 HPI505 06528 6.528 - 0.2570 8 53 91
HPI505 040 4 - 0.1575 6 36 74 HPI505 066 6.6 - 0.2598 8 53 91
HPI505 04039 4.039 - 0.1590 6 36 74 HPI505 067 6.7 - 0.2638 8 53 91
HPI505 041 4.1 - 0.1614 6 36 74 HPI505 06747 6.747 17/64 0.2656 8 53 91
HPI505 042 4.2 - 0.1654 6 36 74 HPI505 068 6.8 - 0.2677 8 53 91
HPI505 043 4.3 - 0.1693 6 36 74 HPI505 069 6.9 - 0.2717 8 53 91
HPI505 04366 4.366 - 0.1719 6 36 74 HPI505 06909 6.909 - 0.2720 8 53 91
HPI505 044 4.4 - 0.1732 6 36 74 HPI505 070 7 - 0.2756 8 53 91
HPI505 045 4.5 - 0.1772 6 36 74 HPI505 071 7.1 - 0.2795 8 53 91
HPI505 0458 4.58 - 0.1803 6 36 74 HPI505 07145 7.145 9/32 0.2813 8 53 91
HPI505 046 4.6 - 0.1811 6 36 74 HPI505 072 7.2 - 0.2835 8 53 91
HPI505 04623 4.623 - 0.1820 6 36 74 HPI505 073 7.3 - 0.2874 8 53 91
HPI505 047 4.7 - 0.1850 6 36 74 HPI505 074 7.4 - 0.2913 8 53 91
HPI505 04763 4.763 3/16 0.1875 6 44 82 HPI505 075 7.5 - 0.2953 8 53 91
HPI505 048 4.8 - 0.1890 6 44 82 HPI505 07541 7.541 19/64 0.2969 8 53 91
HPI505 049 4.9 - 0.1929 6 44 82 HPI505 076 7.6 - 0.2992 8 53 91
HPI505 050 5 - 0.1969 6 44 82 HPI505 077 7.7 - 0.3031 8 53 91
HPI505 051 5.1 - 0.2008 6 44 82 HPI505 078 7.8 - 0.3071 8 53 91
HPI505 05159 5.159 13/64 0.2031 6 44 82 HPI505 079 7.9 - 0.3110 8 53 91
HPI505 052 5.2 - 0.2047 6 44 82 HPI505 07938 7.938 5/16 0.3125 8 53 91
HPI505 053 5.3 - 0.2087 6 44 82 HPI505 080 8 - 0.3150 8 53 91
HPI505 054 5.4 - 0.2126 6 44 82 HPI505 081 8.1 - 0.3189 10 61 103
HPI505 0541 5.41 - 0.2130 6 44 82 HPI505 082 8.2 - 0.3228 10 61 103
HPI505 055 5.5 - 0.2165 6 44 82 HPI505 083 8.3 - 0.3268 10 61 103
304 KORLOY
HPI5
t50-&3"/$&
DATA ØD Ød
DIN ULTRA 30 Ø3
6537K FINE 5×D Ø3.1 ~ Ø6
+0.012 ~ +0.002mm
+0.016 ~ +0.004mm
HELIX 140 Ø6.1 ~ Ø10 +0.021 ~ +0.006mm h6
p.531 Ø10.1 ~ Ø18 +0.025 ~ +0.007mm
Ø18.1 ~ +0.029 ~ +0.008mm
140˚
(mm)
ØD ØD
HPI505 08334 8.334 21/64 0.3281 10 61 103 HPI505 110 11 - 0.4331 12 71 118
HPI505 084 8.4 - 0.3307 10 61 103 HPI505 111 11.1 - 0.4370 12 71 118
HPI505 08433 8.433 - 0.3320 10 61 103 HPI505 11113 11.113 7/16 0.4375 12 71 118
HPI505 085 8.5 - 0.3346 10 61 103 HPI505 112 11.2 - 0.4409 12 71 118
HPI505 086 8.6 - 0.3386 10 61 103 HPI505 113 11.3 - 0.4449 12 71 118
HPI505 087 8.7 - 0.3425 10 61 103 HPI505 114 11.4 - 0.4488 12 71 118
HPI505 08733 8.733 11/32 0.3438 10 61 103 HPI505 115 11.5 - 0.4528 12 71 118
HPI505 088 8.8 - 0.3465 10 61 103 HPI505 11509 11.509 29/64 0.4531 12 71 118
HPI505 089 8.9 - 0.3504 10 61 103 HPI505 116 11.6 - 0.4567 12 71 118
HPI505 090 9 - 0.3543 10 61 103 HPI505 117 11.7 - 0.4606 12 71 118
HPI505 091 9.1 - 0.3583 10 61 103 HPI505 118 11.8 - 0.4646 12 71 118
HPI505 09129 9.129 23/64 0.3594 10 61 103 HPI505 119 11.9 - 0.4685 12 71 118
HPI505 092 9.2 - 0.3622 10 61 103 HPI505 11908 11.908 15/32 0.4688 12 71 118
HPI505 093 9.3 - 0.3661 10 61 103 HPI505 120 12 - 0.4724 12 71 118
HPI505 09347 9.347 - 0.3680 10 61 103 HPI505 121 12.1 - 0.4764 14 77 124
HPI505 094 9.4 - 0.3701 10 61 103 HPI505 122 12.2 - 0.4803 14 77 124
HPI505 095 9.5 - 0.3740 10 61 103 HPI505 123 12.3 - 0.4843 14 77 124
HPI505 09525 9.525 3/8 0.3750 10 61 103 HPI505 12304 12.304 31/64 0.4844 14 77 124
HPI505 096 9.6 - 0.3780 10 61 103 HPI505 124 12.4 - 0.4882 14 77 124
HPI505 097 9.7 - 0.3819 10 61 103 HPI505 125 12.5 - 0.4921 14 77 124
HPI505 09703 9.703 - 0.3820 10 61 103 HPI505 126 12.6 - 0.4961 14 77 124
HPI505 09746 9.746 - 0.3837 10 61 103 HPI505 127 12.7 1/2 0.5000 14 77 124
HPI505 098 9.8 - 0.3858 10 61 103 HPI505 128 12.8 - 0.5039 14 77 124
HPI505 099 9.9 - 0.3898 10 61 103 HPI505 129 12.9 - 0.5079 14 77 124
HPI505 09921 9.921 25/64 0.3906 10 61 103 HPI505 12903 12.903 - 0.5080 14 77 124
HPI505 100 10 - 0.3937 10 61 103 HPI505 130 13 - 0.5118 14 77 124
HPI505 101 10.1 - 0.3976 12 71 118 HPI505 13096 13.096 33/64 0.5156 14 77 124
HPI505 102 10.2 - 0.4016 12 71 118 HPI505 131 13.1 - 0.5157 14 77 124
HPI505 103 10.3 - 0.4055 12 71 118 HPI505 132 13.2 - 0.5197 14 77 124
HPI505 1032 10.32 13/32 0.4063 12 71 118 HPI505 133 13.3 - 0.5236 14 77 124
HPI505 104 10.4 - 0.4074 12 71 118 HPI505 134 13.4 - 0.5276 14 77 124
HPI505 105 10.5 - 0.4134 12 71 118 HPI505 13494 13.494 17/32 0.5313 14 77 124
HPI505 106 10.6 - 0.4173 12 71 118 HPI505 135 13.5 - 0.5315 14 77 124
HPI505 107 10.7 - 0.4213 12 71 118 HPI505 137 13.7 - 0.5394 14 77 124
HPI505 10716 10.716 27/64 0.4219 12 71 118 HPI505 138 13.8 - 0.5433 14 77 124
HPI505 108 10.8 - 0.4252 12 71 118 HPI505 13891 13.981 35/64 0.5504 14 77 124
HPI505 109 10.9 - 0.4291 12 71 118 HPI505 140 14 - 0.5512 14 77 124
KORLOY
Y 305
Drill
P-Star Drill
HPI5
t50-&3"/$&
DATA ØD Ød
DIN ULTRA 30 Ø3
6537K FINE 5×D Ø3.1 ~ Ø6
+0.012 ~ +0.002mm
+0.016 ~ +0.004mm
HELIX 140 Ø6.1 ~ Ø10 +0.021 ~ +0.006mm h6
p.531 Ø10.1 ~ Ø18 +0.025 ~ +0.007mm
Ø18.1 ~ +0.029 ~ +0.008mm
140˚
(mm)
ØD ØD
HPI505 141 14.1 - 0.5551 16 83 133 HPI505 170 17 - 0.6693 18 93 143
HPI505 142 14.2 - 0.5591 16 83 133 HPI505 171 17.1 - 0.6732 18 93 143
HPI505 14288 14.288 9/16 0.5625 16 83 133 HPI505 172 17.2 - 0.6772 18 93 143
HPI505 145 14.5 - 0.5709 16 83 133 HPI505 173 17.3 - 0.6811 18 93 143
HPI505 146 14.6 - 0.5748 16 83 133 HPI505 17463 17.463 11/16 0.6875 18 93 143
HPI505 147 14.7 - 0.5787 16 83 133 HPI505 175 17.5 - 0.6890 18 93 143
HPI505 148 14.8 - 0.5827 16 83 133 HPI505 176 17.6 - 0.6929 18 93 143
HPI505 149 14.9 - 0.5866 16 83 133 HPI505 177 17.7 - 0.6969 18 93 143
HPI505 150 15 - 0.5906 16 83 133 HPI505 178 17.8 - 0.7008 18 93 143
HPI505 15081 15.081 19/32 0.5937 16 83 133 HPI505 179 17.9 - 0.7047 18 93 143
HPI505 151 15.1 - 0.5945 16 83 133 HPI505 180 18 - 0.7087 18 93 143
HPI505 152 15.2 - 0.5984 16 83 133 HPI505 184 18.4 - 0.7244 20 101 153
HPI505 155 15.5 - 0.6102 16 83 133 HPI505 185 18.5 - 0.7283 20 101 153
HPI505 156 15.6 - 0.6142 16 83 133 HPI505 186 18.6 - 0.7323 20 101 153
HPI505 157 15.7 - 0.6181 16 83 133 HPI505 188 18.8 - 0.7402 20 101 153
HPI505 158 15.8 - 0.6220 16 83 133 HPI505 189 18.9 - 0.7441 20 101 153
HPI505 15875 15.875 5/8 0.6250 16 83 133 HPI505 190 19 - 0.7480 20 101 153
HPI505 159 15.9 - 0.6260 16 83 133 HPI505 1905 19.05 3/4 0.7500 20 101 153
HPI505 160 16 - 0.6299 16 83 133 HPI505 192 19.2 - 0.7559 20 101 153
HPI505 16078 16.078 - 0.6330 18 93 143 HPI505 19253 19.253 - 0.7580 20 101 153
HPI505 162 16.2 - 0.6378 18 93 143 HPI505 19446 19.446 49/64 0.7656 20 101 153
HPI505 164 16.4 - 0.6457 18 93 143 HPI505 195 19.5 - 0.7677 20 101 153
HPI505 165 16.5 - 0.6496 18 93 143 HPI505 197 19.7 - 0.7756 20 101 153
HPI505 166 16.6 - 0.6535 18 93 143 HPI505 19844 19.844 25/32 0.7813 20 101 153
HPI505 16667 16.667 21/32 0.6562 18 93 143 HPI505 200 20 - 0.7874 20 101 153
HPI505 167 16.7 - 0.6575 18 93 143
○ ◎ ◎ ○ ○ ◎ ○
306 KORLOY
HPI508-N
HP Double margin internal coolant drill - 8×D
t50-&3"/$&
DATA ØD Ød
ULTRA 30 Ø3
FINE 8×D Ø3.1 ~ Ø6
+0.012 ~ +0.002mm
+0.016 ~ +0.004mm
HELIX 140 Ø6.1 ~ Ø10 +0.021 ~ +0.006mm h6
p.531 Ø10.1 ~ Ø18 +0.025 ~ +0.007mm
Ø18.1 ~ +0.029 ~ +0.008mm
140˚
(mm)
ØD ØD
HPI508 030N 3 - 0.1181 6 43 80 HPI508 05953N 5.953 15/64 0.2344 6 56 94
HPI508 031N 3.1 - 0.1220 6 43 80 HPI508 060N 6 - 0.2362 6 65 94
HPI508 03175N 3.175 1/8 0.1250 6 43 80 HPI508 061N 6.1 - 0.2402 8 67 105
HPI508 032N 3.2 - 0.1260 6 43 80 HPI508 062N 6.2 - 0.2441 8 67 105
HPI508 03264N 3.264 - 0.1285 6 43 80 HPI508 063N 6.3 - 0.2480 8 67 105
HPI508 033N 3.3 - 0.1299 6 43 80 HPI508 0635N 6.35 1/4 0.2500 8 67 105
HPI508 034N 3.4 - 0.1339 6 43 80 HPI508 064N 6.4 - 0.2520 8 67 105
HPI508 035N 3.5 - 0.1378 6 43 80 HPI508 065N 6.5 - 0.2559 8 67 105
HPI508 03572N 3.572 9/64 0.1406 6 43 80 HPI508 066N 6.6 - 0.2598 8 67 105
HPI508 036N 3.6 - 0.1417 6 43 80 HPI508 067N 6.7 - 0.2638 8 67 105
HPI508 037N 3.7 - 0.1457 6 43 80 HPI508 06747N 6.747 17/64 0.2656 8 67 105
HPI508 038N 3.8 - 0.1496 6 49 87 HPI508 068N 6.8 - 0.2677 8 67 105
HPI508 039N 3.9 - 0.1535 6 49 87 HPI508 069N 6.9 - 0.2717 8 67 105
HPI508 0397N 3.97 5/32 0.1563 6 49 87 HPI508 070N 7 - 0.2756 8 76 116
HPI508 040N 4 - 0.1575 6 49 87 HPI508 071N 7.1 - 0.2795 8 76 116
HPI508 04039N 4.039 - 0.1590 6 49 87 HPI508 07145N 7.145 9/32 0.2813 8 76 116
HPI508 041N 4.1 - 0.1614 6 49 87 HPI508 072N 7.2 - 0.2835 8 76 116
HPI508 042N 4.2 - 0.1654 6 49 87 HPI508 073N 7.3 - 0.2874 8 76 116
HPI508 043N 4.3 - 0.1693 6 49 87 HPI508 074N 7.4 - 0.2913 8 76 116
HPI508 04366N 4.366 - 0.1719 6 49 87 HPI508 075N 7.5 - 0.2953 8 76 116
HPI508 044N 4.4 - 0.1732 6 49 87 HPI508 07541N 7.541 19/64 0.2969 8 76 116
HPI508 045N 4.5 - 0.1772 6 49 87 HPI508 076N 7.6 - 0.2992 8 76 116
HPI508 046N 4.6 - 0.1811 6 49 87 HPI508 077N 7.7 - 0.3031 8 76 116
HPI508 047N 4.7 - 0.1850 6 49 87 HPI508 078N 7.8 - 0.3071 8 76 116
HPI508 04763N 4.763 3/16 0.1875 6 56 94 HPI508 079N 7.9 - 0.3110 8 76 116
HPI508 048N 4.8 - 0.1890 6 56 94 HPI508 07938N 7.938 5/16 0.3125 8 76 116
HPI508 049N 4.9 - 0.1929 6 56 94 HPI508 080N 8 - 0.3150 8 76 116
HPI508 050N 5 - 0.1969 6 56 94 HPI508 081N 8.1 - 0.3189 10 87 131
HPI508 051N 5.1 - 0.2008 6 56 94 HPI508 082N 8.2 - 0.3228 10 87 131
HPI508 05159N 5.159 13/64 0.2031 6 56 94 HPI508 083N 8.3 - 0.3268 10 87 131
HPI508 052N 5.2 - 0.2047 6 56 94 HPI508 08334N 8.334 21/64 0.3281 10 87 131
HPI508 053N 5.3 - 0.2087 6 56 94 HPI508 084N 8.4 - 0.3307 10 87 131
HPI508 054N 5.4 - 0.2126 6 56 94 HPI508 085N 8.5 - 0.3346 10 87 131
HPI508 055N 5.5 - 0.2165 6 56 94 HPI508 086N 8.6 - 0.3386 10 87 131
HPI508 05558N 5.558 7/32 0.2188 6 56 94 HPI508 087N 8.7 - 0.3425 10 87 131
HPI508 056N 5.6 - 0.2205 6 56 94 HPI508 08733N 8.733 11/32 0.3438 10 87 131
HPI508 057N 5.7 - 0.2244 6 56 94 HPI508 088N 8.8 - 0.3465 10 87 131
HPI508 058N 5.8 - 0.2283 6 56 94 HPI508 089N 8.9 - 0.3504 10 87 131
HPI508 059N 5.9 - 0.2323 6 56 94 HPI508 090N 9 - 0.3543 10 87 131
KORLOY
Y 307
Drill
P-Star Drill
HPI508-N
HP Double margin internal coolant drill - 8×D
t50-&3"/$&
DATA ØD Ød
ULTRA 30 Ø3
FINE 8×D Ø3.1 ~ Ø6
+0.012 ~ +0.002mm
+0.016 ~ +0.004mm
HELIX 140 Ø6.1 ~ Ø10 +0.021 ~ +0.006mm h6
p.531 Ø10.1 ~ Ø18 +0.025 ~ +0.007mm
Ø18.1 ~ +0.029 ~ +0.008mm
140˚
(mm)
ØD ØD
HPI508 091N 9.1 - 0.3583 10 95 139 11.9 - 0.4685 12 114 163
HPI508 09129N 9.129 23/64 0.3594 10 95 139 HPI508 11908N 11.908 15/32 0.4688 12 114 163
HPI508 092N 9.2 - 0.3622 10 95 139 HPI508 120N 12 - 0.4724 12 114 163
HPI508 093N 9.3 - 0.3661 10 95 139 HPI508 12304N 12.304 31/64 0.4844 14 133 182
HPI508 094N 9.4 - 0.3701 10 95 139 HPI508 125N 12.5 - 0.4921 14 133 182
HPI508 095N 9.5 - 0.3740 10 95 139 HPI508 127N 12.7 1/2 0.5000 14 133 182
HPI508 09525N 9.525 3/8 0.3750 10 95 139 HPI508 128N 12.8 - 0.5039 14 133 182
HPI508 096N 9.6 - 0.3780 10 95 139 HPI508 130N 13 - 0.5118 14 133 182
HPI508 097N 9.7 - 0.3819 10 95 139 HPI508 13494N 13.494 - 0.5313 14 133 182
HPI508 098N 9.8 - 0.3858 10 95 139 HPI508 135N 13.5 - 0.5315 14 133 182
HPI508 099N 9.9 - 0.3898 10 95 139 HPI508 140N 14 - 0.5512 14 133 182
HPI508 09921N 9.921 25/64 0.3906 10 95 139 HPI508 14288N 14.288 9/16 0.5625 16 152 204
HPI508 100N 10 - 0.3937 10 95 139 HPI508 145N 14.5 - 0.5709 16 152 204
HPI508 101N 10.1 - 0.3976 12 106 155 HPI508 150N 15 - 0.5906 16 152 204
HPI508 102N 10.2 - 0.4016 12 106 155 HPI508 151N 15.1 - 0.5945 16 152 204
HPI508 103N 10.3 - 0.4055 12 106 155 HPI508 152N 15.2 - 0.5984 16 152 204
HPI508 1032N 10.32 13/32 0.4063 12 106 155 HPI508 153N 15.3 - 0.6024 16 152 204
HPI508 104N 10.4 - 0.4094 12 106 155 HPI508 155N 15.5 - 0.6102 16 152 204
HPI508 105N 10.5 - 0.4134 12 106 155 HPI508 158N 15.8 - 0.6220 16 152 204
HPI508 107N 10.7 - 0.4213 12 106 155 HPI508 15875N 15.875 5/8 0.6250 16 152 204
HPI508 10716N 10.716 27/64 0.4219 12 106 155 HPI508 160N 16 - 0.6299 16 152 204
HPI508 108N 10.8 - 0.4252 12 106 155 HPI508 16078N 16.078 - 0.6330 18 171 223
HPI508 109N 10.9 - 0.4291 12 106 155 HPI508 162N 16.2 - 0.6378 18 171 223
HPI508 110N 11 - 0.4331 12 106 155 HPI508 165N 16.5 - 0.6496 18 171 223
HPI508 111N 11.1 - 0.4370 12 114 163 HPI508 170N 17 - 0.6693 18 171 223
HPI508 11113N 11.113 7/16 0.4375 12 114 163 HPI508 17463N 17.463 11/16 0.6875 18 171 223
HPI508 112N 11.2 - 0.4409 12 114 163 HPI508 175N 17.5 - 0.6890 18 171 223
HPI508 113N 11.3 - 0.4449 12 114 163 HPI508 180N 18 - 0.7087 18 171 223
HPI508 114N 11.4 - 0.4488 12 114 163 HPI508 185N 18.5 - 0.7283 20 191 244
HPI508 115N 11.5 - 0.4528 12 114 163 HPI508 190N 19 - 0.7480 20 191 244
HPI508 11509N 11.509 29/64 0.4531 12 114 163 HPI508 1905N 19.05 3/4 0.7500 20 191 244
HPI508 116N 11.6 - 0.4567 12 114 163 HPI508 19253N 19.253 - 0.7580 20 191 244
HPI508 117N 11.7 - 0.4606 12 114 163 HPI508 198N 19.8 - 0.7795 20 191 244
HPI508 118N 11.8 - 0.4646 12 114 163 HPI508 200N 20 - 0.7874 20 191 244
○ ◎ ◎ ○ ○ ◎ ○
308 KORLOY
503A(F)
P503A t50-&3"/$&
Din 6537KK type drill
DATA D Ød
DIN ULTRA 30 Ø3
6537K FINE 3×D Ø3.1 ~ Ø6
+0.012 ~ +0.002mm
+0.016 ~ +0.004mm
HELIX 140 Ø6.1 ~ Ø10 +0.021 ~ +0.006mm h6
p.532 Ø10.1 ~ Ø18 +0.025 ~ +0.007mm
Ø18.1 ~ +0.029 ~ +0.008mm
140˚
(mm)
Designation ℓ Designation ℓ
Designation (Weldon shankk) ØD Ød L Designation (Weldon shankk) ØD Ød L
P503A 030 P503F 030 3 6 20 62 P503A 071 P503F 071 7.1 8 41 79

P503A 031 P503F 031 3.1 6 20 62 P503A 072 P503F 072 7.2 8 41 79
P503A 032 P503F 032 3.2 6 20 62 P503A 073 P503F 073 7.3 8 41 79
P503A 033 P503F 033 3.3 6 20 62 P503A 074 P503F 074 7.4 8 41 79
P503A 034 P503F 034 3.4 6 20 62 P503A 075 P503F 075 7.5 8 41 79
P503A 035 P503F 035 3.5 6 20 62 P503A 076 P503F 076 7.6 8 41 79
P503A 036 P503F 036 3.6 6 20 62 P503A 077 P503F 077 7.7 8 41 79
P503A 037 P503F 037 3.7 6 20 62 P503A 078 P503F 078 7.8 8 41 79
P503A 038 P503F 038 3.8 6 24 66 P503A 079 P503F 079 7.9 8 41 79
P503A 039 P503F 039 3.9 6 24 66 P503A 080 P503F 080 8 8 41 79
P503A 040 P503F 040 4 6 24 66 P503A 081 P503F 081 8.1 10 47 89
P503A 041 P503F 041 4.1 6 24 66 P503A 082 P503F 082 8.2 10 47 89
P503A 042 P503F 042 4.2 6 24 66 P503A 083 P503F 083 8.3 10 47 89
P503A 043 P503F 043 4.3 6 24 66 P503A 084 P503F 084 8.4 10 47 89
P503A 044 P503F 044 4.4 6 24 66 P503A 085 P503F 085 8.5 10 47 89
P503A 045 P503F 045 4.5 6 24 66 P503A 086 P503F 086 8.6 10 47 89
P503A 046 P503F 046 4.6 6 24 66 P503A 087 P503F 087 8.7 10 47 89
P503A 047 P503F 047 4.7 6 24 66 P503A 088 P503F 088 8.8 10 47 89
P503A 048 P503F 048 4.8 6 28 66 P503A 089 P503F 089 8.9 10 47 89
P503A 049 P503F 049 4.9 6 28 66 P503A 090 P503F 090 9 10 47 89
P503A 050 P503F 050 5 6 28 66 P503A 091 P503F 091 9.1 10 47 89
P503A 051 P503F 051 5.1 6 28 66 P503A 092 P503F 092 9.2 10 47 89
P503A 052 P503F 052 5.2 6 28 66 P503A 093 P503F 093 9.3 10 47 89
P503A 053 P503F 053 5.3 6 28 66 P503A 094 P503F 094 9.4 10 47 89
P503A 054 P503F 054 5.4 6 28 66 P503A 095 P503F 095 9.5 10 47 89
P503A 055 P503F 055 5.5 6 28 66 P503A 096 P503F 096 9.6 10 47 89
P503A 056 P503F 056 5.6 6 28 66 P503A 097 P503F 097 9.7 10 47 89
P503A 057 P503F 057 5.7 6 28 66 P503A 098 P503F 098 9.8 10 47 89
P503A 058 P503F 058 5.8 6 28 66 P503A 099 P503F 099 9.9 10 47 89
P503A 059 P503F 059 5.9 6 28 66 P503A 100 P503F 100 10 10 47 89
P503A 060 P503F 060 6 6 28 66 P503A 101 P503F 101 10.1 12 55 102
P503A 061 P503F 061 6.1 8 34 79 P503A 102 P503F 102 10.2 12 55 102
P503A 062 P503F 062 6.2 8 34 79 P503A 103 P503F 103 10.3 12 55 102
P503A 063 P503F 063 6.3 8 34 79 P503A 104 P503F 104 10.4 12 55 102
P503A 064 P503F 064 6.4 8 34 79 P503A 105 P503F 105 10.5 12 55 102
P503A 065 P503F 065 6.5 8 34 79 P503A 106 P503F 106 10.6 12 55 102
P503A 066 P503F 066 6.6 8 34 79 P503A 107 P503F 107 10.7 12 55 102
P503A 067 P503F 067 6.7 8 34 79 P503A 108 P503F 108 10.8 12 55 102
P503A 068 P503F 068 6.8 8 34 79 P503A 109 P503F 109 10.9 12 55 102
P503A 069 P503F 069 6.9 8 34 79 P503A 110 P503F 110 11 12 55 102
P503A 070 P503F 070 7 8 34 79 P503A 111 P503F 111 11.1 12 55 102
KORLOY
Y 309
Drill
P-Star Drill
503A(F)
P503A t50-&3"/$&
Din 6537KK type drill
DATA ØD Ød
DIN ULTRA 30 Ø3
6537K FINE 3×D Ø3.1 ~ Ø6
+0.012 ~ +0.002mm
+0.016 ~ +0.004mm
HELIX 140 Ø6.1 ~ Ø10 +0.021 ~ +0.006mm h6
p.532 Ø10.1 ~ Ø18 +0.025 ~ +0.007mm
Ø18.1 ~ +0.029 ~ +0.008mm
140˚
(mm)
P503A 112 P503F 112 11.2 12 55 102 P503A 146 P503F 146 14.6 16 65 115
P503A 113 P503F 113 11.3 12 55 102 P503A 147 P503F 147 14.7 16 65 115
P503A 114 P503F 114 11.4 12 55 102 P503A 148 P503F 148 14.8 16 65 115
P503A 115 P503F 115 11.5 12 55 102 P503A 149 P503F 149 14.9 16 65 115
P503A 116 P503F 116 11.6 12 55 102 P503A 150 P503F 150 15 16 65 115
P503A 117 P503F 117 11.7 12 55 102 P503A 151 P503F 151 15.1 16 65 115
P503A 118 P503F 118 11.8 12 55 102 P503A 152 P503F 152 15.2 16 65 115
P503A 119 P503F 119 11.9 12 55 102 P503A 153 P503F 153 15.3 16 65 115
P503A 120 P503F 120 12 12 55 102 P503A 154 P503F 154 15.4 16 65 115
P503A 121 P503F 121 12.1 14 60 107 P503A 155 P503F 155 15.5 16 65 115
P503A 122 P503F 122 12.2 14 60 107 P503A 156 P503F 156 15.6 16 65 115
P503A 123 P503F 123 12.3 14 60 107 P503A 157 P503F 157 15.7 16 65 115
P503A 124 P503F 124 12.4 14 60 107 P503A 158 P503F 158 15.8 16 65 115
P503A 125 P503F 125 12.5 14 60 107 P503A 159 P503F 159 15.9 16 65 115
P503A 126 P503F 126 12.6 14 60 107 P503A 160 P503F 160 16 16 65 115
P503A 127 P503F 127 12.7 14 60 107 P503A 161 P503F 161 16.1 18 73 123
P503A 128 P503F 128 12.8 14 60 107 P503A 163 P503F 163 16.3 18 73 123
P503A 129 P503F 129 12.9 14 60 107 P503A 165 P503F 165 16.5 18 73 123
P503A 130 P503F 130 13 14 60 107 P503A 170 P503F 170 17 18 73 123
P503A 131 P503F 131 13.1 14 60 107 P503A 171 P503F 171 17.1 18 73 123
P503A 132 P503F 132 13.2 14 60 107 P503A 172 P503F 172 17.2 18 73 123
P503A 133 P503F 133 13.3 14 60 107 P503A 175 P503F 175 17.5 18 73 123
P503A 134 P503F 134 13.4 14 60 107 P503A 177 P503F 177 17.7 18 73 123
P503A 135 P503F 135 13.5 14 60 107 P503A 178 P503F 178 17.8 18 73 123
P503A 136 P503F 136 13.6 14 60 107 P503A 180 P503F 180 18 18 73 123
P503A 137 P503F 137 13.7 14 60 107 P503A 181 P503F 181 18.1 20 79 131
P503A 138 P503F 138 13.8 14 60 107 P503A 182 P503F 182 18.2 20 79 131
P503A 139 P503F 139 13.9 14 60 107 P503A 185 P503F 185 18.5 20 79 131
P503A 140 P503F 140 14 14 60 107 P503A 190 P503F 190 19 20 79 131
P503A 141 P503F 141 14.1 16 65 115 P503A 191 P503F 191 19.1 20 79 131
P503A 142 P503F 142 14.2 16 65 115 P503A 195 P503F 195 19.5 20 79 131
P503A 143 P503F 143 14.3 16 65 115 P503A 197 P503F 197 19.7 20 79 131
P503A 144 P503F 144 14.4 16 65 115 P503A 200 P503F 200 20 20 79 131
P503A 145 P503F 145 14.5 16 65 115
○ ◎ ◎ ○ ○ ◎ ○
310 KORLOY
PI503A(F)
PI5 Din 6537K type internal coolant drill
t50-&3"/$&
DATA ØD Ød
DIN ULTRA 30 Ø3
6537K FINE 3×D Ø3.1 ~ Ø6
+0.012 ~ +0.002mm
+0.016 ~ +0.004mm
HELIX 140 Ø6.1 ~ Ø10 +0.021 ~ +0.006mm h6
p.532 Ø10.1 ~ Ø18 +0.025 ~ +0.007mm
Ø18.1 ~ +0.029 ~ +0.008mm
140˚
(mm)
PI503A 030 PI503F 030 3 6 20 62 PI503A071 PI503F 071 7.1 8 41 79

PI503A 031 PI503F 031 3.1 6 20 62 PI503A072 PI503F 072 7.2 8 41 79
PI503A 032 PI503F 032 3.2 6 20 62 PI503A073 PI503F 073 7.3 8 41 79
PI503A 033 PI503F 033 3.3 6 20 62 PI503A074 PI503F 074 7.4 8 41 79
PI503A 034 PI503F 034 3.4 6 20 62 PI503A075 PI503F 075 7.5 8 41 79
PI503A 035 PI503F 035 3.5 6 20 62 PI503A076 PI503F 076 7.6 8 41 79
PI503A 036 PI503F 036 3.6 6 20 62 PI503A077 PI503F 077 7.7 8 41 79
PI503A 037 PI503F 037 3.7 6 20 62 PI503A078 PI503F 078 7.8 8 41 79
PI503A 038 PI503F 038 3.8 6 24 66 PI503A079 PI503F 079 7.9 8 41 79
PI503A 039 PI503F 039 3.9 6 24 66 PI503A080 PI503F 080 8 8 41 79
PI503A 040 PI503F 040 4 6 24 66 PI503A081 PI503F 081 8.1 10 47 89
PI503A 041 PI503F 041 4.1 6 24 66 PI503A082 PI503F 082 8.2 10 47 89
PI503A 042 PI503F 042 4.2 6 24 66 PI503A083 PI503F 083 8.3 10 47 89
PI503A 043 PI503F 043 4.3 6 24 66 PI503A084 PI503F 084 8.4 10 47 89
PI503A 044 PI503F 044 4.4 6 24 66 PI503A085 PI503F 085 8.5 10 47 89
PI503A 045 PI503F 045 4.5 6 24 66 PI503A086 PI503F 086 8.6 10 47 89
PI503A 046 PI503F 046 4.6 6 24 66 PI503A087 PI503F 087 8.7 10 47 89
PI503A 047 PI503F 047 4.7 6 24 66 PI503A088 PI503F 088 8.8 10 47 89
PI503A 048 PI503F 048 4.8 6 28 66 PI503A089 PI503F 089 8.9 10 47 89
PI503A 049 PI503F 049 4.9 6 28 66 PI503A090 PI503F 090 9 10 47 89
PI503A 050 PI503F 050 5 6 28 66 PI503A091 PI503F 091 9.1 10 47 89
PI503A 051 PI503F 051 5.1 6 28 66 PI503A092 PI503F 092 9.2 10 47 89
PI503A 052 PI503F 052 5.2 6 28 66 PI503A093 PI503F 093 9.3 10 47 89
PI503A 053 PI503F 053 5.3 6 28 66 PI503A094 PI503F 094 9.4 10 47 89
PI503A 054 PI503F 054 5.4 6 28 66 PI503A095 PI503F 095 9.5 10 47 89
PI503A 055 PI503F 055 5.5 6 28 66 PI503A096 PI503F 096 9.6 10 47 89
PI503A 056 PI503F 056 5.6 6 28 66 PI503A097 PI503F 097 9.7 10 47 89
PI503A 057 PI503F 057 5.7 6 28 66 PI503A098 PI503F 098 9.8 10 47 89
PI503A 058 PI503F 058 5.8 6 28 66 PI503A099 PI503F 099 9.9 10 47 89
PI503A 059 PI503F 059 5.9 6 28 66 PI503A100 PI503F 100 10 10 47 89
PI503A 060 PI503F 060 6 6 28 66 PI503A101 PI503F 101 10.1 12 55 102
PI503A 061 PI503F 061 6.1 8 34 79 PI503A 102 PI503F 102 10.2 12 55 102
PI503A 062 PI503F 062 6.2 8 34 79 PI503A 103 PI503F 103 10.3 12 55 102
PI503A 063 PI503F 063 6.3 8 34 79 PI503A 104 PI503F 104 10.4 12 55 102
PI503A 064 PI503F 064 6.4 8 34 79 PI503A 105 PI503F 105 10.5 12 55 102
PI503A 065 PI503F 065 6.5 8 34 79 PI503A 106 PI503F 106 10.6 12 55 102
PI503A066 PI503F 066 6.6 8 34 79 PI503A 107 PI503F 107 10.7 12 55 102
PI503A067 PI503F 067 6.7 8 34 79 PI503A 108 PI503F 108 10.8 12 55 102
PI503A068 PI503F 068 6.8 8 34 79 PI503A 109 PI503F 109 10.9 12 55 102
PI503A069 PI503F 069 6.9 8 34 79 PI503A 110 PI503F 110 11 12 55 102
PI503A070 PI503F 070 7 8 34 79 PI503A 111 PI503F 111 11.1 12 55 102
KORLOY
Y 311
Drill
P-Star Drill
PI503A(F)
t50-&3"/$&
DATA ØD Ød
DIN ULTRA 30 Ø3
6537K FINE 3×D Ø3.1 ~ Ø6
+0.012 ~ +0.002mm
+0.016 ~ +0.004mm
HELIX 140 Ø6.1 ~ Ø10 +0.021 ~ +0.006mm h6
p.532 Ø10.1 ~ Ø18 +0.025 ~ +0.007mm
Ø18.1 ~ +0.029 ~ +0.008mm
140˚
(mm)
PI503A 112 PI503F 112 11.2 12 55 102 PI503A 146 PI503F 146 14.6 16 65 115
PI503A 113 PI503F 113 11.3 12 55 102 PI503A 147 PI503F 147 14.7 16 65 115
PI503A 114 PI503F 114 11.4 12 55 102 PI503A 148 PI503F 148 14.8 16 65 115
PI503A 115 PI503F 115 11.5 12 55 102 PI503A 149 PI503F 149 14.9 16 65 115
PI503A 116 PI503F 116 11.6 12 55 102 PI503A 150 PI503F 150 15 16 65 115
PI503A 117 PI503F 117 11.7 12 55 102 PI503A 151 PI503F 151 15.1 16 65 115
PI503A 118 PI503F 118 11.8 12 55 102 PI503A 152 PI503F 152 15.2 16 65 115
PI503A 119 PI503F 119 11.9 12 55 102 PI503A 153 PI503F 153 15.3 16 65 115
PI503A 120 PI503F 120 12 12 55 102 PI503A 154 PI503F 154 15.4 16 65 115
PI503A 121 PI503F 121 12.1 14 60 107 PI503A 155 PI503F 155 15.5 16 65 115
PI503A 122 PI503F 122 12.2 14 60 107 PI503A 156 PI503F 156 15.6 16 65 115
PI503A 123 PI503F 123 12.3 14 60 107 PI503A 157 PI503F 157 15.7 16 65 115
PI503A 124 PI503F 124 12.4 14 60 107 PI503A 158 PI503F 158 15.8 16 65 115
PI503A 125 PI503F 125 12.5 14 60 107 PI503A 159 PI503F 159 15.9 16 65 115
PI503A 126 PI503F 126 12.6 14 60 107 PI503A 160 PI503F 160 16 16 65 115
PI503A 127 PI503F 127 12.7 14 60 107 PI503A 161 PI503F 161 16.1 18 73 123
PI503A 128 PI503F 128 12.8 14 60 107 PI503A 163 PI503F 163 16.3 18 73 123
PI503A 129 PI503F 129 12.9 14 60 107 PI503A 165 PI503F 165 16.5 18 73 123
PI503A 130 PI503F 130 13 14 60 107 PI503A 170 PI503F 170 17 18 73 123
PI503A 131 PI503F 131 13.1 14 60 107 PI503A 171 PI503F 171 17.1 18 73 123
PI503A 132 PI503F 132 13.2 14 60 107 PI503A 172 PI503F 172 17.2 18 73 123
PI503A 133 PI503F 133 13.3 14 60 107 PI503A 175 PI503F 175 17.5 18 73 123
PI503A 134 PI503F 134 13.4 14 60 107 PI503A 177 PI503F 177 17.7 18 73 123
PI503A 135 PI503F 135 13.5 14 60 107 PI503A 178 PI503F 178 17.8 18 73 123
PI503A 136 PI503F 136 13.6 14 60 107 PI503A 180 PI503F 180 18 18 73 123
PI503A 137 PI503F 137 13.7 14 60 107 PI503A 181 PI503F 181 18.1 20 79 131
PI503A 138 PI503F 138 13.8 14 60 107 PI503A 182 PI503F 182 18.2 20 79 131
PI503A 139 PI503F 139 13.9 14 60 107 PI503A 185 PI503F 185 18.5 20 79 131
PI503A 140 PI503F 140 14 14 60 107 PI503A 190 PI503F 190 19 20 79 131
PI503A 141 PI503F 141 14.1 16 65 115 PI503A 191 PI503F 191 19.1 20 79 131
PI503A 142 PI503F 142 14.2 16 65 115 PI503A 195 PI503F 195 19.5 20 79 131
PI503A 143 PI503F 143 14.3 16 65 115 PI503A 197 PI503F 197 19.7 20 79 131
PI503A 144 PI503F 144 14.4 16 65 115 PI503A 200 PI503F 200 20 20 79 131
PI503A 145 PI503F 145 14.5 16 65 115
○ ◎ ◎ ○ ○ ◎ ○
312 KORLOY
PI505A(F)
t50-&3"/$&
DATA ØD Ød
DIN ULTRA 30 Ø4 ~ Ø6
6537K FINE 5×D Ø6.1 ~ Ø10
+0.016 ~ +0.004mm
+0.021 ~ +0.006mm
HELIX 140 Ø10.1 ~ Ø18 +0.025 ~ +0.007mm
h6
p.532 Ø18.1 ~ +0.029 ~ +0.008mm
140˚
(mm)
PI505A 040 PI505F 040 4 6 36 74 PI505A 078 PI505F 078 7.8 8 53 91

PI505A 041 PI505F 041 4.1 6 36 74 PI505A 079 PI505F 079 7.9 8 53 91
PI505A 042 PI505F 042 4.2 6 36 74 PI505A 080 PI505F 080 8 8 53 91
PI505A 043 PI505F 043 4.3 6 36 74 PI505A 081 PI505F 081 8.1 10 61 103
PI505A 044 PI505F 044 4.4 6 36 74 PI505A 082 PI505F 082 8.2 10 61 103
PI505A 045 PI505F 045 4.5 6 36 74 PI505A 083 PI505F 083 8.3 10 61 103
PI505A 046 PI505F 046 4.6 6 36 74 PI505A 084 PI505F 084 8.4 10 61 103
PI505A 047 PI505F 047 4.7 6 36 74 PI505A 085 PI505F 085 8.5 10 61 103
PI505A 048 PI505F 048 4.8 6 44 82 PI505A 086 PI505F 086 8.6 10 61 103
PI505A 049 PI505F 049 4.9 6 44 82 PI505A 087 PI505F 087 8.7 10 61 103
PI505A 050 PI505F 050 5 6 44 82 PI505A 088 PI505F 088 8.8 10 61 103
PI505A 051 PI505F 051 5.1 6 44 82 PI505A 089 PI505F 089 8.9 10 61 103
PI505A 052 PI505F 052 5.2 6 44 82 PI505A 090 PI505F 090 9 10 61 103
PI505A 053 PI505F 053 5.3 6 44 82 PI505A 091 PI505F 091 9.1 10 61 103
PI505A 054 PI505F 054 5.4 6 44 82 PI505A 092 PI505F 092 9.2 10 61 103
PI505A 055 PI505F 055 5.5 6 44 82 PI505A 093 PI505F 093 9.3 10 61 103
PI505A 056 PI505F 056 5.6 6 44 82 PI505A 094 PI505F 094 9.4 10 61 103
PI505A 057 PI505F 057 5.7 6 44 82 PI505A 095 PI505F 095 9.5 10 61 103
PI505A 058 PI505F 058 5.8 6 44 82 PI505A 096 PI505F 096 9.6 10 61 103
PI505A 059 PI505F 059 5.9 6 44 82 PI505A 097 PI505F 097 9.7 10 61 103
PI505A 060 PI505F 060 6 6 44 82 PI505A 098 PI505F 098 9.8 10 61 103
PI505A 061 PI505F 061 6.1 8 53 91 PI505A 099 PI505F 099 9.9 10 61 103
PI505A 062 PI505F 062 6.2 8 53 91 PI505A 100 PI505F 100 10 10 61 103
PI505A 063 PI505F 063 6.3 8 53 91 PI505A 101 PI505F 101 10.1 12 71 118
PI505A 064 PI505F 064 6.4 8 53 91 PI505A 102 PI505F 102 10.2 12 71 118
PI505A 065 PI505F 065 6.5 8 53 91 PI505A 103 PI505F 103 10.3 12 71 118
PI505A 066 PI505F 066 6.6 8 53 91 PI505A 104 PI505F 104 10.4 12 71 118
PI505A 067 PI505F 067 6.7 8 53 91 PI505A 105 PI505F 105 10.5 12 71 118
PI505A 068 PI505F 068 6.8 8 53 91 PI505A 106 PI505F 106 10.6 12 71 118
PI505A 069 PI505F 069 6.9 8 53 91 PI505A 107 PI505F 107 10.7 12 71 118
PI505A 070 PI505F 070 7 8 53 91 PI505A 108 PI505F 108 10.8 12 71 118
PI505A 071 PI505F 071 7.1 8 53 91 PI505A 109 PI505F 109 10.9 12 71 118
PI505A 072 PI505F 072 7.2 8 53 91 PI505A 110 PI505F 110 11 12 71 118
PI505A 073 PI505F 073 7.3 8 53 91 PI505A 111 PI505F 111 11.1 12 71 118
PI505A 074 PI505F 074 7.4 8 53 91 PI505A 112 PI505F 112 11.2 12 71 118
PI505A 075 PI505F 075 7.5 8 53 91 PI505A 113 PI505F 113 11.3 12 71 118
PI505A 076 PI505F 076 7.6 8 53 91 PI505A 114 PI505F 114 11.4 12 71 118
PI505A 077 PI505F 077 7.7 8 53 91 PI505A 115 PI505F 115 11.5 12 71 118
KORLOY
Y 313
Drill
P-Star Drill
PI505A(F)
t50-&3"/$&
DATA ØD Ød
DIN ULTRA 30 Ø4 ~ Ø6
6537K FINE 5×D Ø6.1 ~ Ø10
+0.016 ~ +0.004mm
+0.021 ~ +0.006mm
HELIX 140 Ø10.1 ~ Ø18 +0.025 ~ +0.007mm
h6
p.532 Ø18.1 ~ +0.029 ~ +0.008mm
140˚
(mm)
PI505A 116 PI505F 116 11.6 12 71 118 PI505A 148 PI505F 148 14.8 16 83 133
PI505A 117 PI505F 117 11.7 12 71 118 PI505A 149 PI505F 149 14.9 16 83 133
PI505A 118 PI505F 118 11.8 12 71 118 PI505A 150 PI505F 150 15 16 83 133
PI505A 119 PI505F 119 11.9 12 71 118 PI505A 151 PI505F 151 15.1 16 83 133
PI505A 120 PI505F 120 12 12 71 118 PI505A 152 PI505F 152 15.2 16 83 133
PI505A 121 PI505F 121 12.1 14 77 124 PI505A 153 PI505F 153 15.3 16 83 133
PI505A 122 PI505F 122 12.2 14 77 124 PI505A 154 PI505F 154 15.4 16 83 133
PI505A 123 PI505F 123 12.3 14 77 124 PI505A 155 PI505F 155 15.5 16 83 133
PI505A 124 PI505F 124 12.4 14 77 124 PI505A 156 PI505F 156 15.6 16 83 133
PI505A 125 PI505F 125 12.5 14 77 124 PI505A 157 PI505F 157 15.7 16 83 133
PI505A 126 PI505F 126 12.6 14 77 124 PI505A 158 PI505F 158 15.8 16 83 133
PI505A 127 PI505F 127 12.7 14 77 124 PI505A 159 PI505F 159 15.9 16 83 133
PI505A 128 PI505F 128 12.8 14 77 124 PI505A 160 PI505F 160 16 16 83 133
PI505A 129 PI505F 129 12.9 14 77 124 PI505A 161 PI505F 161 16.1 18 93 143
PI505A 130 PI505F 130 13 14 77 124 PI505A 163 PI505F 163 16.3 18 93 143
PI505A 131 PI505F 131 13.1 14 77 124 PI505A 165 PI505F 165 16.5 18 93 143
PI505A 132 PI505F 132 13.2 14 77 124 PI505A 170 PI505F 170 17 18 93 143
PI505A 133 PI505F 133 13.3 14 77 124 PI505A 171 PI505F 171 17.1 18 93 143
PI505A 134 PI505F 134 13.4 14 77 124 PI505A 172 PI505F 172 17.2 18 93 143
PI505A 135 PI505F 135 13.5 14 77 124 PI505A 175 PI505F 175 17.5 18 93 143
PI505A 136 PI505F 136 13.6 14 77 124 PI505A 177 PI505F 177 17.7 18 93 143
PI505A 137 PI505F 137 13.7 14 77 124 PI505A 178 PI505F 178 17.8 18 93 143
PI505A 138 PI505F 138 13.8 14 77 124 PI505A 180 PI505F 180 18 18 93 143
PI505A 139 PI505F 139 13.9 14 77 124 PI505A 181 PI505F 181 18.1 20 101 153
PI505A 140 PI505F 140 14 14 77 124 PI505A 182 PI505F 182 18.2 20 101 153
PI505A 141 PI505F 141 14.1 16 83 133 PI505A 185 PI505F 185 18.5 20 101 153
PI505A 142 PI505F 142 14.2 16 83 133 PI505A 190 PI505F 190 19 20 101 153
PI505A 143 PI505F 143 14.3 16 83 133 PI505A 191 PI505F 191 19.1 20 101 153
PI505A 144 PI505F 144 14.4 16 83 133 PI505A 195 PI505F 195 19.5 20 101 153
PI505A 145 PI505F 145 14.5 16 83 133 PI505A 197 PI505F 197 19.7 20 101 153
PI505A 146 PI505F 146 14.6 16 83 133 PI505A 200 PI505F 200 20 20 101 153
PI505A 147 PI505F 147 14.7 16 83 133
○ ◎ ◎ ○ ○ ◎ ◎
314 KORLOY
Economical carbide coated solid drill
W-Star Drill
t Better cutting performance with an improved thinning shape which lessens cutting load
t High rigidity and good chip evacuation from the optimal designed flute
t Excellent cutting performance in stainless machining
Code system
NDP G 5 04 100
W-Star Drill Appearance Grade Length Diameter
G: General 5 : Grade 03 : 3D 010 : Ø1.0 mm
04 : 4D 060 : Ø6.0 mm
07 : 7D 065 : Ø6.5 mm
100 : Ø10.0 mm
Features
t XR Thinning shape t 0QUJNBMGMVUF

- Reduced cutting load on - Good chip evacuation due to applying
the cutting edge with a the larger chip pocket
streamlined thinning
- Improved chip breaking
4&$5*0/""
A
A
Multi Point angle
t Multi Point angle t New AlCrN coating

- Separated cutting load by - Improved chip evacuation with enhanced
optimal point angle flute lubrication
- Streamlined 1st point angle - Enhanced wear resistance and oxidation
resistance by multi-layer coating
&%1/0 Appearance Type Drills dia. Page
NDPG503 General purpose drill Ø1.0 ~ Ø13.0 316~317
KORLOY
Y 315
Drill
W-Star Drill
NDPG50
DPG503 t50-&3"/$&
General purpose drill
DATA ØD Ød
ULTRA 30 Ø1 ~ Ø3 0 ~ -0.010mm
FINE 3×D Ø3.1 ~ Ø6 0 ~ -0.012mm
HELIX 140 h6
Ø6.1 ~ Ø10 0 ~ -0.015mm
p.533 Ø10.1 ~ Ø13 0 ~ -0.018mm
140˚
(mm)
Description (mm) TAP Description (mm) TAP
Designation Designation
ØD Ød ℓ L Size Limit ØD Ød ℓ L Size Limit
NDPG503010 1 3 5 38 - - NDPG503044 4.4 5 22 62 - -
NDPG503011 1.1 3 6 42 - - NDPG503045 4.5 5 22 62 - -
NDPG503012 1.2 3 6 42 - - NDPG503046 4.6 5 22 62 - -
NDPG503013 1.3 3 6 42 - - NDPG503047 4.7 5 22 62 - -
NDPG503014 1.4 3 7 42 - - NDPG50304763 4.763 5 24 62 - -
NDPG503015 1.5 3 7 42 - - NDPG503048 4.8 5 24 62 - -
NDPG503016 1.6 3 8 42 - - NDPG503049 4.9 5 24 62 - -
NDPG503017 1.7 3 8 42 - - NDPG503050 5 5 24 62 M6x1.0 WH1~4
NDPG503018 1.8 3 9 42 - - NDPG503051 5.1 6 24 62 M6x1.0 WH5~6
NDPG503019 1.9 3 9 42 - - NDPG50305159 5.159 6 28 66 - -
NDPG503020 2 3 10 50 - - NDPG503052 5.2 6 28 66 - -
NDPG503021 2.1 3 10 50 - - NDPG503053 5.3 6 28 66 - -
NDPG503022 2.2 3 11 50 - - NDPG503054 5.4 6 28 66 - -
NDPG503023 2.3 3 11 50 - - NDPG503055 5.5 6 28 66 - -
NDPG503024 2.4 3 12 50 - - NDPG50305556 5.556 6 28 66 - -
NDPG503025 2.5 3 12 50 M3x0.5 WH1~4 NDPG503056 5.6 6 28 66 - -
NDPG503026 2.6 3 12 50 M3x0.5 WH5~6 NDPG503057 5.7 6 28 66 - -
NDPG503027 2.7 3 14 50 - - NDPG503058 5.8 6 28 66 - -
NDPG503028 2.8 3 14 50 - - NDPG503059 5.9 6 28 66 - -
NDPG503029 2.9 3 14 50 - - NDPG50305953 5.953 6 28 66 - -
NDPG503030 3 3 14 55 - - NDPG503060 6 6 28 66 - -
NDPG503031 3.1 4 16 55 - - NDPG503061 6.1 7 30 66 - -
NDPG50303175 3.175 4 16 55 - - NDPG503062 6.2 7 34 74 - -
NDPG503032 3.2 4 16 55 - - NDPG503063 6.3 7 34 74 - -
NDPG50303264 3.264 4 16 55 - - NDPG5030635 6.35 7 34 74 - -
NDPG503033 3.3 4 16 55 M4x0.7 WH1~4 NDPG503064 6.4 7 34 74 - -
NDPG503034 3.4 4 16 55 M4x0.7 WH5~6 NDPG503065 6.5 7 34 74 - -
NDPG503035 3.5 4 16 55 - - NDPG503066 6.6 7 34 74 - -
NDPG50303572 3.572 4 18 55 - - NDPG503067 6.7 7 37 74 - -
NDPG503036 3.6 4 18 55 - - NDPG50306747 6.747 7 37 74 - -
NDPG503037 3.7 4 18 55 - - NDPG503068 6.8 7 37 74 M8x1.25 WH1~4
NDPG503038 3.8 4 20 55 - - NDPG503069 6.9 7 37 74 M8x1.25 WH5~6
NDPG503039 3.9 4 20 55 - - NDPG503070 7 7 37 74 M8x1.0 WH1~4
NDPG503040 4 4 20 55 - - NDPG503071 7.1 8 37 74 M8x1.0 WH5~6
NDPG50304039 4.039 5 20 55 - - NDPG50307144 7.144 8 40 79 - -
NDPG503041 4.1 5 20 55 - - NDPG503072 7.2 8 40 79 - -
NDPG503042 4.2 5 20 62 M5x0.8 WH1~4 NDPG503073 7.3 8 40 79 - -
NDPG503043 4.3 5 22 62 M5x0.8 WH5~6 NDPG503074 7.4 8 40 79 - -
316 KORLOY
NDPG503
PG503 t50-&3"/$&
DATA ØD Ød
ULTRA 30 Ø1 ~ Ø3 0 ~ -0.010mm
FINE 3×D Ø3.1 ~ Ø6 0 ~ -0.012mm
HELIX 140 h6
Ø6.1 ~ Ø10 0 ~ -0.015mm
p.533 Ø10.1 ~ Ø13 0 ~ -0.018mm
140˚
(mm)
NDPG503075 7.5 8 40 79 - - NDPG503103 10.3 11 51 95 M12x1.75 WH1~2
NDPG50307541 7.541 8 40 79 - - NDPG50310319 10.319 11 51 95 M12x1.75 WH3~4
NDPG503076 7.6 8 40 79 - - NDPG503104 10.4 11 51 95 M12x1.75 WH5~6
NDPG503077 7.7 8 40 79 - - NDPG503105 10.5 11 51 95 M12x1.5 WH1~4
NDPG503078 7.8 8 40 79 - - NDPG503106 10.6 11 51 95 M12x1.5 WH5~6
NDPG503079 7.9 8 40 79 - - NDPG503107 10.7 11 51 95 - -
NDPG50307938 7.938 8 40 79 - - NDPG50310716 10.716 11 51 95 - -
NDPG503080 8 8 40 79 - - NDPG503108 10.8 11 51 95 M12x1.25 WH1~4
NDPG503081 8.1 9 40 79 - - NDPG503109 10.9 11 51 95 M12x1.25 WH5~6
NDPG503082 8.2 9 43 84 - - NDPG503110 11 11 51 95 M12x1.0 WH1~4
NDPG503083 8.3 9 43 84 - - NDPG503111 11.1 12 51 95 M12x1.0 WH5~6
NDPG503084 8.4 9 43 84 - - NDPG50311113 11.113 12 54 102 - -
NDPG503085 8.5 9 43 84 M10x1.5 WH1~4 NDPG503112 11.2 12 54 102 - -
NDPG503086 8.6 9 43 84 M10x1.5 WH5~6 NDPG503113 11.3 12 54 102 - -
NDPG503087 8.7 9 43 84 - - NDPG503114 11.4 12 54 102 - -
NDPG50308731 8.731 9 43 84 - - NDPG503115 11.5 12 54 102 - -
NDPG503088 8.8 9 43 84 M10x1.25 WH1~4 NDPG503116 11.6 12 54 102 - -
NDPG503089 8.9 9 43 84 M10x1.25 WH5~6 NDPG503117 11.7 12 54 102 - -
NDPG503090 9 9 43 84 M10x1.0 WH1~4 NDPG503118 11.8 12 54 102 - -
NDPG503091 9.1 10 43 84 M10x1.0 WH5~6 NDPG503119 11.9 12 54 102 - -
NDPG503092 9.2 10 47 89 - - NDPG503120 12 12 54 102 M14x2 WH1~4
NDPG503093 9.3 10 47 89 - - NDPG503121 12.1 13 54 102 M14x2 WH5~6
NDPG503094 9.4 10 47 89 - - NDPG503122 12.2 13 57 102 - -
NDPG503095 9.5 10 47 89 - - NDPG503123 12.3 13 57 102 - -
NDPG50309525 9.525 10 47 89 - - NDPG503124 12.4 13 57 102 - -
NDPG503096 9.6 10 47 89 - - NDPG503125 12.5 13 57 102 M14x1.5 WH1~4
NDPG503097 9.7 10 47 89 - - NDPG503126 12.6 13 57 102 M14x1.5 WH5~6
NDPG503098 9.8 10 47 89 - - NDPG503127 12.7 13 57 102 - -
NDPG503099 9.9 10 47 89 - - NDPG503128 12.8 13 57 102 - -
NDPG503100 10 10 47 89 - - NDPG503129 12.9 13 57 102 - -
NDPG503101 10.1 11 47 89 - - NDPG503130 13 13 57 102 - -
NDPG503102 10.2 11 51 95 - -
Alloy steel Pre-hardened steel Hardened steel Nonferrous steels &
Cast iron Stainless steels
~ HB225 HB225~325 HRC30~50 SKD61~HRC55 SKD11 HRC55~ Aluminum
◎ ◎ ○ ○ ◎
KORLOY
Y 317
Drill
W-Star Drill
NDPG504
PG504 t50-&3"/$&
DATA ØD Ød
ULTRA 30 Ø1 ~ Ø3 0 ~ -0.010mm
FINE 4×D Ø3.1 ~ Ø6 0 ~ -0.012mm
HELIX 140
Ø6.1 ~ Ø10 0 ~ -0.015mm h6
p.533 Ø10.1 ~ Ø18 0 ~ -0.018mm
Ø18.1 ~ 0 ~ -0.021mm
140˚
(mm)
NDPG504010 1 3 8 38 - - NDPG504043 4.3 5 33 63 M5x0.8 WH1~4
NDPG504011 1.1 3 9 42 - - NDPG504044 4.4 5 33 63 M5x0.8 WH5~6
NDPG504012 1.2 3 10 42 - - NDPG504045 4.5 5 33 63 - -
NDPG504013 1.3 3 10 42 - - NDPG504046 4.6 5 33 63 - -
NDPG504014 1.4 3 11 42 - - NDPG504047 4.7 5 33 63 - -
NDPG504015 1.5 3 11 42 - - NDPG50404763 4.763 5 33 63 - -
NDPG504016 1.6 3 12 42 - - NDPG504048 4.8 5 33 63 - -
NDPG504017 1.7 3 12 42 - - NDPG504049 4.9 5 33 63 - -
NDPG504018 1.8 3 13 42 - - NDPG504050 5 5 33 63 M6x1.0 WH1~4
NDPG504019 1.9 3 13 42 - - NDPG504051 5.1 6 33 63 M6x1.0 WH5~6
NDPG504020 2 3 18 50 - - NDPG50405159 5.159 6 36 66 - -
NDPG504021 2.1 3 18 50 - - NDPG504052 5.2 6 36 66 - -
NDPG504022 2.2 3 18 50 - - NDPG504053 5.3 6 36 66 - -
NDPG504023 2.3 3 18 50 - - NDPG504054 5.4 6 36 66 - -
NDPG504024 2.4 3 18 50 - - NDPG504055 5.5 6 36 66 - -
NDPG504025 2.5 3 18 50 M3x0.5 WH1~4 NDPG50405556 5.556 6 36 66 - -
NDPG504026 2.6 3 18 50 M3x0.5 WH5~6 NDPG504056 5.6 6 36 66 - -
NDPG504027 2.7 3 18 50 - - NDPG504057 5.7 6 36 66 - -
NDPG504028 2.8 3 18 50 - - NDPG504058 5.8 6 36 66 - -
NDPG504029 2.9 3 18 50 - - NDPG504059 5.9 6 36 66 - -
NDPG504030 3 3 20 55 - - NDPG50405953 5.953 6 36 66 - -
NDPG504031 3.1 4 20 55 - - NDPG504060 6 6 36 66 - -
NDPG50403175 3.175 4 20 55 - - NDPG504061 6.1 7 36 66 - -
NDPG504032 3.2 4 20 55 - - NDPG504062 6.2 7 42 75 - -
NDPG50403264 3.264 4 20 55 - - NDPG504063 6.3 7 42 75 - -
NDPG504033 3.3 4 20 55 M3x0.7 WH1~4 NDPG5040635 6.35 7 42 75 - -
NDPG504034 3.4 4 20 55 M4x0.7 WH 5~6 NDPG504064 6.4 7 42 75 - -
NDPG504035 3.5 4 20 55 - - NDPG504065 6.5 7 42 75 - -
NDPG50403572 3.572 4 25 55 - - NDPG504066 6.6 7 42 75 - -
NDPG504036 3.6 4 25 55 - - NDPG504067 6.7 7 42 75 - -
NDPG504037 3.7 4 25 55 - - NDPG50406747 6.747 7 42 75 - -
NDPG504038 3.8 4 25 55 - - NDPG504068 6.8 7 42 75 M8x1.25 WH1~4
NDPG504039 3.9 4 25 55 - - NDPG504069 6.9 7 42 75 M8x1.25 WH5~6
NDPG504040 4 4 25 55 - - NDPG504070 7 7 42 75 M8x1.0 WH1~4
NDPG50404039 4.039 5 25 55 - - NDPG504071 7.1 8 42 75 M8x1.0 WH5~6
NDPG504041 4.1 5 25 55 - - NDPG50407144 7.144 8 46 80 - -
NDPG504042 4.2 5 33 63 - - NDPG504072 7.2 8 46 80 - -
318 KORLOY
NDPG504
PG504 t50-&3"/$&
DATA ØD Ød
ULTRA 30 Ø1 ~ Ø3 0 ~ -0.010mm
FINE 4×D Ø3.1 ~ Ø6 0 ~ -0.012mm
HELIX 140
Ø6.1 ~ Ø10 0 ~ -0.015mm h6
p.533 Ø10.1 ~ Ø18 0 ~ -0.018mm
Ø18.1 ~ 0 ~ -0.021mm
140˚
(mm)
NDPG504073 7.3 8 46 80 - - NDPG504105 10.5 11 57 95 M12x1.5 WH1~4
NDPG504074 7.4 8 46 80 - - NDPG504106 10.6 11 57 95 M12x1.5 WH5~6
NDPG504075 7.5 8 46 80 - - NDPG504107 10.7 11 57 95 - -
NDPG50407541 7.541 8 46 80 - - NDPG50410716 10.716 11 57 95 - -
NDPG504076 7.6 8 46 80 - - NDPG504108 10.8 11 57 95 M12x1.25 WH1~4
NDPG504077 7.7 8 46 80 - - NDPG504109 10.9 11 57 95 M12x1.25 WH5~6
NDPG504078 7.8 8 46 80 - - NDPG504110 11 11 57 95 M12x1.0 WH1~4
NDPG504079 7.9 8 46 80 - - NDPG504111 11.1 12 57 95 M12x1.0 WH5~6
NDPG50407938 7.938 8 46 80 - - NDPG50411113 11.113 12 63 102 - -
NDPG504080 8 8 46 80 - - NDPG504112 11.2 12 63 102 - -
NDPG504081 8.1 9 46 80 - - NDPG504113 11.3 12 63 102 - -
NDPG504082 8.2 9 50 85 - - NDPG504114 11.4 12 63 102 - -
NDPG504083 8.3 9 50 85 - - NDPG504115 11.5 12 63 102 - -
NDPG504084 8.4 9 50 85 - - NDPG504116 11.6 12 63 102 - -
NDPG504085 8.5 9 50 85 M10x1.5 WH1~4 NDPG504117 11.7 12 63 102 - -
NDPG504086 8.6 9 50 85 M10x1.5 WH5~6 NDPG504118 11.8 12 63 102 - -
NDPG504087 8.7 9 50 85 - - NDPG504119 11.9 12 63 102 - -
NDPG50408731 8.731 9 50 85 - - NDPG504120 12 12 63 102 M14x2.0 WH1~4
NDPG504088 8.8 9 50 85 M10x1.25 WH1~4 NDPG504121 12.1 13 63 102 M14x2.0 WH5~6
NDPG504089 8.9 9 50 85 M10x1.25 WH5~6 NDPG504122 12.2 13 63 102 - -
NDPG504090 9 9 50 85 M10x1.0 WH1~4 NDPG504123 12.3 13 63 102 - -
NDPG504091 9.1 10 50 85 M10x1.0 WH5~6 NDPG504124 12.4 13 63 102 - -
NDPG504092 9.2 10 55 90 - - NDPG504125 12.5 13 63 102 M14x1.5 WH1~4
NDPG504093 9.3 10 55 90 - - NDPG504126 12.6 13 63 102 M14x1.5 WH5~6
NDPG504094 9.4 10 55 90 - - NDPG504127 12.7 13 63 102 - -
NDPG504095 9.5 10 55 90 - - NDPG504128 12.8 13 63 102 - -
NDPG50409525 9.525 10 55 90 - - NDPG504129 12.9 13 63 102 - -
NDPG504096 9.6 10 55 90 - - NDPG504130 13 13 63 102 - -
NDPG504097 9.7 10 55 90 - - NDPG504131 13.1 14 63 102 - -
NDPG504098 9.8 10 55 90 - - NDPG504132 13.2 14 65 107 - -
NDPG504099 9.9 10 55 90 - - NDPG504133 13.3 14 65 107 - -
NDPG504100 10 10 55 90 - - NDPG504134 13.4 14 65 107 - -
NDPG504101 10.1 11 55 90 - - NDPG50413494 13.494 14 65 107 - -
NDPG504102 10.2 11 57 95 - - NDPG504135 13.5 14 65 107 - -
NDPG504103 10.3 11 57 95 M12x1.75 WH1~2 NDPG504136 13.6 14 65 107 - -
NDPG50410319 10.319 11 57 95 M12x1.75 WH3~4 NDPG504137 13.7 14 65 107 - -
NDPG504104 10.4 11 57 95 M12x1.75 WH5~6 NDPG504138 13.8 14 65 107 - -
KORLOY
Y 319
Drill
W-Star Drill
NDPG504
PG504 t50-&3"/$&
DATA ØD Ød
ULTRA 30 Ø1 ~ Ø3 0 ~ -0.010mm
FINE 4×D Ø3.1 ~ Ø6 0 ~ -0.012mm
HELIX 140
Ø6.1 ~ Ø10 0 ~ -0.015mm h6
p.533 Ø10.1 ~ Ø18 0 ~ -0.018mm
Ø18.1 ~ 0 ~ -0.021mm
140˚
(mm)
NDPG504139 13.9 14 65 107 - - 16 16 69 115 - -
NDPG504140 14 14 65 107 M16x2.0 WH1~4 NDPG504161 16.1 17 69 115 - -
NDPG504141 14.1 15 65 107 M16x2.0 WH5~6 NDPG504163 16.3 17 71 119 - -
NDPG504142 14.2 15 67 111 - - NDPG504165 16.5 17 71 119 M18x1.5 WH1~6
NDPG504143 14.3 15 67 111 - - NDPG50416669 16.669 17 71 119 - -
NDPG504144 14.4 15 67 111 - - NDPG504170 17 17 71 119 - -
NDPG504145 14.5 15 67 111 M16x1.5 WH1~4 NDPG504171 17.1 18 71 119 - -
NDPG504146 14.6 15 67 111 M16x1.5 WH5~6 NDPG504172 17.2 18 74 123 - -
NDPG504147 14.7 15 67 111 - - NDPG504175 17.5 18 74 123 M20x2.5 WH1~6
NDPG504148 14.8 15 67 111 - - NDPG504177 17.7 18 74 123 - -
NDPG504149 14.9 15 67 111 - - NDPG504178 17.8 18 74 123 - -
NDPG504150 15 15 67 111 - - NDPG504180 18 18 74 123 - -
NDPG504151 15.1 16 67 111 - - NDPG504181 18.1 19 74 123 - -
NDPG504152 15.2 16 69 115 - - NDPG504182 18.2 19 76 127 - -
NDPG504154 15.4 16 69 115 - - NDPG504185 18.5 19 76 127 M20x1.5 WH1~6
NDPG504155 15.5 16 69 115 M18x2.5 WH1~4 NDPG504190 19 19 76 127 - -
NDPG504156 15.6 16 69 115 M18x2.5 WH5~6 NDPG504191 19.1 20 76 127 - -
NDPG504157 15.7 16 69 115 - - NDPG504195 19.5 20 80 131 M22x2.5 WH1~6
NDPG504158 15.8 16 69 115 - - NDPG504197 19.7 20 80 131 - -
NDPG50415875 15.875 16 69 115 - - NDPG504200 20 20 80 131 - -
◎ ◎ ○ ○ ◎
320 KORLOY
NDPG507
PG507 t50-&3"/$&
DATA ØD Ød
ULTRA 30 Ø3 0 ~ -0.010mm
FINE 7×D Ø3.1 ~ Ø6 0 ~ -0.012mm
HELIX 140
Ø6.1 ~ Ø10 0 ~ -0.015mm h6
p.533 Ø10.1 ~ Ø18 0 ~ -0.018mm
Ø18.1 ~ 0 ~ -0.021mm
140˚
(mm)
NDPG507030 3 3 45 80 - - NDPG507059 5.9 6 50 83 - -
NDPG507031 3.1 4 45 80 - - NDPG507060 6 6 50 83 - -
NDPG50703175 3.175 4 45 80 - - NDPG507061 6.1 7 50 83 - -
NDPG507032 3.2 4 45 80 - - NDPG507062 6.2 7 53 85 - -
NDPG50703264 3.264 4 45 80 - - NDPG507063 6.3 7 53 85 - -
NDPG507033 3.3 4 45 80 M4x0.7 WH1~4 NDPG5070635 6.35 7 53 85 - -
NDPG507034 3.4 4 45 80 M4x0.7 WH5~6 NDPG507064 6.4 7 53 85 - -
NDPG507035 3.5 4 45 80 - - NDPG507065 6.5 7 53 85 - -
NDPG50703572 3.572 4 45 80 - - NDPG507066 6.6 7 53 85 - -
NDPG507036 3.6 4 45 80 - - NDPG507067 6.7 7 53 85 - -
NDPG507037 3.7 4 45 80 - - NDPG50706747 6.747 7 53 85 - -
NDPG507038 3.8 4 45 80 - - NDPG507068 6.8 7 53 85 M8x1.25 WH1~4
NDPG507039 3.9 4 45 80 - - NDPG507069 6.9 7 53 85 M8x1.25 WH5~6
NDPG507040 4 4 45 80 - - NDPG507070 7 7 53 85 M8x1.0 WH1~4
NDPG507041 4.1 5 45 80 - - NDPG507071 7.1 8 53 85 M8x1.0 WH5~6
NDPG507042 4.2 5 45 80 M5x0.8 WH1~4 NDPG50707144 7.144 8 58 90 - -
NDPG507043 4.3 5 45 80 M5x0.8 WH5~6 NDPG507072 7.2 8 58 90 - -
NDPG507044 4.4 5 45 80 - - NDPG507073 7.3 8 58 90 - -
NDPG507045 4.5 5 45 80 - - NDPG507074 7.4 8 58 90 - -
NDPG507046 4.6 5 45 80 - - NDPG507075 7.5 8 58 90 - -
NDPG507047 4.7 5 45 80 - - NDPG507076 7.6 8 58 90 - -
NDPG50704763 4.763 5 45 80 - - NDPG507077 7.7 8 58 90 - -
NDPG507048 4.8 5 45 80 - - NDPG507078 7.8 8 58 90 - -
NDPG507049 4.9 5 45 80 - - NDPG507079 7.9 8 58 90 - -
NDPG507050 5 5 45 80 M6x1.0 WH1~4 NDPG50707938 7.938 8 58 90 - -
NDPG507051 5.1 6 45 80 M6x1.0 WH5~6 NDPG507080 8 8 58 90 - -
NDPG50705159 5.159 6 50 83 - - NDPG507081 8.1 9 58 90 - -
NDPG507052 5.2 6 50 83 - - NDPG507082 8.2 9 64 98 - -
NDPG507053 5.3 6 50 83 - - NDPG507083 8.3 9 64 98 - -
NDPG507054 5.4 6 50 83 - - NDPG507084 8.4 9 64 98 - -
NDPG507055 5.5 6 50 83 - - NDPG507085 8.5 9 64 98 M10x1.5 WH1~4
NDPG50705556 5.556 6 50 83 - - NDPG507086 8.6 9 64 98 M10x1.5 WH5~6
NDPG507056 5.6 6 50 83 - - NDPG507087 8.7 9 64 98 - -
NDPG507057 5.7 6 50 83 - - NDPG50708731 8.731 9 64 98 - -
NDPG507058 5.8 6 50 83 - - NDPG507088 8.8 9 64 98 M10x1.25 WH1~4
KORLOY
Y 321
Drill
NDPG507
PG507 t50-&3"/$&
DATA ØD Ød
ULTRA 30 Ø3 0 ~ -0.010mm
FINE 7×D Ø3.1 ~ Ø6 0 ~ -0.012mm
HELIX 140
Ø6.1 ~ Ø10 0 ~ -0.015mm h6
p.533 Ø10.1 ~ Ø18 0 ~ -0.018mm
Ø18.1 ~ 0 ~ -0.021mm
140˚
(mm)
NDPG507089 8.9 9 64 98 M10x1.25 WH5~6 NDPG507120 12 12 80 120 M14x2.0 WH1~4
NDPG507090 9 9 64 98 M10x1.0 WH1~4 NDPG507121 12.1 13 80 120 M14x2.0 WH5~6
NDPG507091 9.1 10 64 98 M10x1.0 WH5~6 NDPG507122 12.2 13 90 137 - -
NDPG507092 9.2 10 68 105 - - NDPG507123 12.3 13 90 137 - -
NDPG507093 9.3 10 68 105 - - NDPG507124 12.4 13 90 137 - -
NDPG507094 9.4 10 68 105 - - NDPG507125 12.5 13 90 137 M14x1.5 WH1~4
NDPG507095 9.5 10 68 105 - - NDPG507126 12.6 13 90 137 M14x1.5 WH5~6
NDPG50709525 9.525 10 68 105 - - NDPG507127 12.7 13 90 137 - -
NDPG507096 9.6 10 68 105 - - NDPG507128 12.8 13 90 137 - -
NDPG507097 9.7 10 68 105 - - NDPG507129 12.9 13 90 137 - -
NDPG507098 9.8 10 68 105 - - NDPG507130 13 13 90 137 - -
NDPG507099 9.9 10 68 105 - - NDPG507131 13.1 14 90 137 - -
NDPG507100 10 10 68 105 - - NDPG507133 13.3 14 96 147 - -
NDPG507101 10.1 11 68 105 - - NDPG507134 13.4 14 96 147 - -
NDPG507102 10.2 11 73 110 - - NDPG50713494 13.494 14 96 147 - -
NDPG507103 10.3 11 73 110 M12x1.75 WH1~2 NDPG507135 13.5 14 96 147 - -
NDPG50710319 10.319 11 73 110 M12x1.75 WH3~4 NDPG507136 13.6 14 96 147 - -
NDPG507104 10.4 11 73 110 M12x1.75 WH5~6 NDPG507137 13.7 14 96 147 - -
NDPG507105 10.5 11 73 110 M12x1.5 WH1~4 NDPG507138 13.8 14 96 147 - -
NDPG507106 10.6 11 73 110 M12x1.5 WH5~6 NDPG50713891 13.891 14 96 147 - -
NDPG507107 10.7 11 73 110 - - NDPG507139 13.9 14 96 147 - -
NDPG50710716 10.716 11 73 110 - - NDPG507140 14 14 96 147 M16x2.0 WH1~4
NDPG507108 10.8 11 73 110 M12x1.25 WH1~4 NDPG507141 14.1 15 96 147 M16x2.0 WH5~6
NDPG507109 10.9 11 73 110 M12x1.25 WH5~6 NDPG507142 14.2 15 100 153 - -
NDPG507110 11 11 73 110 M12x1.0 WH1~4 NDPG50714288 14.288 15 100 153 - -
NDPG507111 11.1 12 73 110 M12x1.0 WH5~6 NDPG507143 14.3 15 100 153 - -
NDPG50711113 11.113 12 80 120 - - NDPG507145 14.5 15 100 153 M16x1.5 WH1~4
NDPG507112 11.2 12 80 120 - - NDPG507146 14.6 15 100 153 M16x1.5 WH5~6
NDPG507113 11.3 12 80 120 - - NDPG507147 14.7 15 100 153 - -
NDPG507114 11.4 12 80 120 - - NDPG507148 14.8 15 100 153 - -
NDPG507115 11.5 12 80 120 - - NDPG507149 14.9 15 100 153 - -
NDPG507116 11.6 12 80 120 - - NDPG507150 15 15 100 153 - -
NDPG507117 11.7 12 80 120 - - NDPG507151 15.1 16 100 153 - -
NDPG507118 11.8 12 80 120 - - NDPG507154 15.4 16 112 160 - -
NDPG507119 11.9 12 80 120 - - NDPG507155 15.5 16 112 160 M18x2.5 WH1~4
322 KORLOY
NDPG507
PG507 t50-&3"/$&
DATA ØD Ød
ULTRA 30 Ø3 0 ~ -0.010mm
FINE 7×D Ø3.1 ~ Ø6 0 ~ -0.012mm
HELIX 140
Ø6.1 ~ Ø10 0 ~ -0.015mm h6
p.533 Ø10.1 ~ Ø18 0 ~ -0.018mm
Ø18.1 ~ 0 ~ -0.021mm
140˚
(mm)
NDPG507156 15.6 16 112 160 M18x2.5 WH5~6 NDPG50717463 17.463 18 112 160 - -
NDPG507157 15.7 16 112 160 - - NDPG507175 17.5 18 112 160 M20x2.5 WH1~6
NDPG507158 15.8 16 112 160 - - NDPG507177 17.7 18 112 160 - -
NDPG50715875 15.875 16 112 160 - - NDPG507178 17.8 18 112 160 - -
NDPG507160 16 16 112 160 - - NDPG507180 18 18 112 160 - -
NDPG507161 16.1 17 112 160 - - NDPG507182 18.2 19 112 160 - -
NDPG507163 16.3 17 112 160 - - NDPG507185 18.5 19 112 160 M20x1.5 WH1~6
NDPG507165 16.5 17 112 160 M18x1.5 WH1~6 NDPG507190 19 19 112 160 - -
NDPG50716669 16.669 17 112 160 - - NDPG507195 19.5 20 112 160 M22x2.5 WH1~6
NDPG507170 17 17 112 160 - - NDPG507197 19.7 20 112 160 - -
NDPG507171 17.1 18 112 160 - - NDPG507200 20 20 112 160 - -
NDPG507172 17.2 18 112 160 - -
◎ ◎ ○ ○ ◎
KORLOY
Y 323
Carbide Solid Drill for Non-ferrous metals and Mild steel Machining
SSD-N
t Stable drilling for high productivity
t Available for various workpieces such as mild steel and non-ferrous metals
Special type
Code system
SSD 010 N 10 60L 6S

Solid Spiral Drill dia. (ØD) Nonferrous Flute length Overall length Shank dia.
Drill 6S : Ø6.0 mm
010 : Ø1.0 mm 10 : 10 mm 60L : 60 mm
Features
t Sharp cutting edge t Design for better chip
- Lower cutting load evacuation
t X-shaped fore-end
- High precision
Application range
150
100 Carbide
Carbide
50
Carbide
Workpiece
P N N
Carbon steel, Aluminum Copper alloy
alloy steel
324 KORLOY
SSD-
SD-N t50-&3"/$&
DATA Coating ×
( Dia.)
Tolerance(drill h8
(
p.533
Point angle 118°
Twist angle 30°
Thinning X type

Coolant External
(mm)
SSD 010-N 1.0 1.0 10 38 SSD 047-N 4.7 4.7 33 65

SSD 011-N 1.1 1.1 10 38 SSD 048-N 4.8 4.8 35 65
SSD 012-N 1.2 1.2 10 38 SSD 049-N 4.9 4.9 35 65
SSD 013-N 1.3 1.3 13 38 SSD 050-N 5.0 5.0 35 65
SSD 014-N 1.4 1.4 13 38 SSD 051-N 5.1 5.1 35 65
SSD 015-N 1.5 1.5 13 38 SSD 052-N 5.2 5.2 35 65
SSD 016-N 1.6 1.6 13 38 SSD 053-N 5.3 5.3 35 65
SSD 017-N 1.7 1.7 13 38 SSD 054-N 5.4 5.4 35 65
SSD 018-N 1.8 1.8 13 38 SSD 055-N 5.5 5.5 35 65
SSD 019-N 1.9 1.9 13 38 SSD 056-N 5.6 5.6 38 75
SSD 020-N 2.0 2.0 16 45 SSD 057-N 5.7 5.7 38 75
SSD 021-N 2.1 2.1 16 45 SSD 058-N 5.8 5.8 38 75
SSD 022-N 2.2 2.2 16 45 SSD 059-N 5.9 5.9 38 75
SSD 023-N 2.3 2.3 16 45 SSD 060-N 6.0 6.0 38 75
SSD 024-N 2.4 2.4 18 50 SSD 061-N 6.1 6.1 38 75
SSD 025-N 2.5 2.5 20 50 SSD 062-N 6.2 6.2 38 75
SSD 026-N 2.6 2.6 20 50 SSD 063-N 6.3 6.3 38 75
SSD 027-N 2.7 2.7 22 50 SSD 064-N 6.4 6.4 38 75
SSD 028-N 2.8 2.8 22 50 SSD 065-N 6.5 6.5 38 75
SSD 029-N 2.9 2.9 22 50 SSD 066-N 6.6 6.6 45 80
SSD 030-N 3.0 3.0 22 50 SSD 067-N 6.7 6.7 45 80
SSD 031-N 3.1 3.1 25 50 SSD 068-N 6.8 6.8 45 80
SSD 032-N 3.2 3.2 25 50 SSD 069-N 6.9 6.9 45 80
SSD 033-N 3.3 3.3 25 50 SSD 070-N 7.0 7.0 45 80
SSD 034-N 3.4 3.4 25 50 SSD 071-N 7.1 7.1 45 80
SSD 035-N 3.5 3.5 25 50 SSD 072-N 7.2 7.2 45 80
SSD 036-N 3.6 3.6 28 55 SSD 073-N 7.3 7.3 45 80
SSD 037-N 3.7 3.7 28 55 SSD 074-N 7.4 7.4 45 80
SSD 038-N 3.8 3.8 28 55 SSD 075-N 7.5 7.5 45 80
SSD 039-N 3.9 3.9 28 55 SSD 076-N 7.6 7.6 50 85
SSD 040-N 4.0 4.0 28 55 SSD 077-N 7.7 7.7 50 85
SSD 041-N 4.1 4.1 30 60 SSD 078-N 7.8 7.8 50 85
SSD 042-N 4.2 4.2 30 60 SSD 079-N 7.9 7.9 50 85
SSD 043-N 4.3 4.3 30 60 SSD 080-N 8.0 8.0 50 85
SSD 044-N 4.4 4.4 30 60 SSD 081-N 8.1 8.1 50 85
SSD 045-N 4.5 4.5 30 60 SSD 082-N 8.2 8.2 50 85
SSD 046-N 4.6 4.6 33 65 SSD 083-N 8.3 8.3 50 85
KORLOY
Y 325
Drill
SSD-N
SSD-N
SD-N t50-&3"/$&
DATA Coating ×
( Dia.)
Tolerance(drill h8
(
p.533
Point angle 118°
Twist angle 30°
Thinning X type

Coolant External
(mm)
SSD 084-N 8.4 8.4 50 85 SSD 103-N 10.3 10.3 55 115

SSD 085-N 8.5 8.5 50 85 SSD 104-N 10.4 10.4 55 115
SSD 086-N 8.6 8.6 50 95 SSD 105-N 10.5 10.5 55 115
SSD 087-N 8.7 8.7 50 95 SSD 106-N 10.6 10.6 60 115
SSD 088-N 8.8 8.8 50 95 SSD 107-N 10.7 10.7 60 115
SSD 089-N 8.9 8.9 50 95 SSD 108-N 10.8 10.8 60 115
SSD 090-N 9.0 9.0 50 95 SSD 109-N 10.9 10.9 60 115
SSD 091-N 9.1 9.1 50 95 SSD 110-N 11.0 11.0 60 115
SSD 092-N 9.2 9.2 50 95 SSD 111-N 11.1 11.1 65 120
SSD 093-N 9.3 9.3 50 95 SSD 112-N 11.2 11.2 65 120
SSD 094-N 9.4 9.4 50 95 SSD 113-N 11.3 11.3 65 120
SSD 095-N 9.5 9.5 50 95 SSD 115-N 11.5 11.5 65 120
SSD 096-N 9.6 9.6 50 95 SSD 118-N 11.8 11.8 65 120
SSD 097-N 9.7 9.7 50 95 SSD 119-N 11.9 11.9 65 120
SSD 098-N 9.8 9.8 50 95 SSD 120-N 12.0 12.0 65 120
SSD 099-N 9.9 9.9 55 100 SSD 124-N 12.4 12.4 70 125
SSD 100-N 10.0 10.0 55 100 SSD 125-N 12.5 12.5 70 125
SSD 101-N 10.1 10.1 55 115 SSD 130-N 13.0 13.0 75 130
SSD 102-N 10.2 10.2 55 115
326 KORLOY
Burnishing Drill
BDS
DATA
p.534
Fig 1 Fig 2
(mm)
BDS 040S 4.0 4 35 80 1

BDS 050S 5.0 5 40 85 1
BDS 060S 6.0 6 50 95 1
BDS 070S 7.0 7 55 100 1
BDS 080S 8.0 8 65 110 1
BDS 090S 9.0 9 70 120 1
BDS 100S 10.0 10 80 130 1
BDS 110S 11.0 11 90 140 1
BDS 120B 12.0 12 95 150 2
BDS 130B 13.0 16 105 160 2
BDS 140B 14.0 16 110 170 2
BDS 150B 15.0 16 120 185 2
BDS 160B 16.0 16 125 190 2
KORLOY
Y 327
Drill
Burnishing Drill
DT (St
BDT Step) For tapping a foundation hole
DATA
p.534
1
(mm)
Designation ØD Ød ℓ1 ℓ2 L Tap
BDT M05080 -ℓ1 4.2 6 35 9~15 90 M5XP0.8

BDT M06100 -ℓ1 5.0 7 40 11~18 95 M6XP1.0
BDT M08125 -ℓ1 6.8 10 50 15~24 105 M8XP1.25
BDT M10125 -ℓ1 8.8 12 55 17~30 110 M10XP1.25
BDT M10150 -ℓ1 8.5 12 55 17~30 110 M10XP1.5
BDT M12125 -ℓ1 10.8 14 60 19~36 120 M12XP1.25
BDT M12150 -ℓ1 10.5 14 60 19~36 120 M12XP1.5
BDT M12175 -ℓ1 10.3 14 60 19~36 120 M12XP1.75
328 KORLOY
Top Solid Drill

TSDM
SDM
DATA
p.534
ØD ℓ L a M.T No
TSDM 080~085 8.0~8.5 85 168 25 1

TSDM 086~090 8.6~9.0 88 172 25 1
TSDM 091~095 9.1~9.5 92 175 26 1
TSDM 096~100 9.6~10.0 95 178 26 1
TSDM 101~105 10.1~10.5 98 182 26 1
TSDM 106~110 10.6~11.0 102 185 26 1
TSDM 111~115 11.1~11.5 105 188 26 1
TSDM 116~120 11.6~12.0 108 192 26 1
TSDM 121~125 12.1~12.5 112 195 26 1
TSDM 126~130 12.6~13.0 115 198 26 2
TSDM 131~135 13.1~13.5 118 202 27 2
TSDM 136~140 13.6~14.0 122 205 27 2
TSDM 141~145 14.1~14.5 122 222 27 2
TSDM 146~150 14.6~15.0 125 225 27 2
TSDM 151~155 15.1~15.5 125 228 27 2
TSDM 156~160 15.6~16.0 130 230 27 2
TSDM 161~165 16.1~16.5 132 232 27 2
TSDM 166~170 16.6~17.0 135 234 27 2
TSDM 171~180 17.1~18.0 140 240 27 2
TSDM 181~190 18.1~19.0 145 245 27 2
TSDM 191~200 19.1~20.0 150 250 30 2
TSDM 201~210 20.1~21.0 155 255 30 2
TSDM 211~220 21.1~22.0 160 260 30 2
TSDM 221~230 22.1~23.0 165 265 30 2
TSDM 231~250 23.1~25.0 165 285 34 3
KORLOY
Y 329
PCD Drill
PDD Brazing type
DATA
p.535
(mm)
PDD 0500 5.0 5.0 30 80

PDD 0550 5.5 5.5 30 80
PDD 0600 6.0 6.0 30 80
PDD 0650 6.5 6.5 40 95
PDD 0700 7.0 7.0 40 95
PDD 0750 7.5 7.5 45 100
PDD 0800 8.0 8.0 45 100
PDD 0850 8.5 8.5 50 110
PDD 0900 9.0 9.0 50 110
PDD 0950 9.5 9.5 55 115
PDD 1000 10.0 10.0 55 115
PDD 1050 10.5 10.5 60 120
PDD 1100 11.0 11.0 60 120
PDD 1150 11.5 11.5 65 125
PDD 1200 12.0 12.0 65 125
330 KORLOY
CPD (Standar
Standard) Cone type
DATA
p.535
CPD 020~030 2.0~3.0 4 10 43

CPD 031~035 3.1~3.5 4 15 43
CPD 036~040 3.6~4.0 4 15 43
CPD 041~050 4.1~5.0 6 20 53
CPD 051~060 5.1~6.0 6 25 63
CPD 061~070 6.1~7.0 8 30 79
CPD 071~080 7.1~8.0 8 35 79
DL (Long)
CPDL Cone type
DATA
p.535
CPDL 020~030 2.0~3.0 4 90 160

CPDL 031~035 3.1~3.5 4 90 160
CPDL 036~040 3.6~4.0 4 90 160
CPDL 041~050 4.1~5.0 6 90 160
CPDL 051~060 5.1~6.0 6 90 160
CPDL 061~070 6.1~7.0 8 90 160
CPDL 071~080 7.1~8.0 8 90 160
Notice
t)JHIGVODUJPOBMESJMMGPSNBDIJOJOHJOWBSJPVTDVUUJOHSBOHF$POFUZQFESJMM(CPD)
t3FBMJ[JOHFYDFMMFOUBDDVSBDZBOETVSGBDFGJOJTI
t)JHIQSFDJTJPOQSFNJVN1$%ESJMM
KORLOY
Y 331
Drill
PCD Drill
SPD (Standar
Standard) Sandwich type
DATA
p.535
(mm)
SPD 040 4.0 4 20 43

SPD 045 4.5 6 20 53
SPD 050 5.0 6 25 63
SPD 055 5.5 6 25 63
SPD 060 6.0 6 25 63
SPD 065 6.5 8 30 79
SPD 070 7.0 8 35 79
SPD 075 7.5 8 35 79
SPD 080 8.0 8 35 79
SPD 085 8.5 10 60 110
SPD 090 9.0 10 60 110
SPD 095 9.5 10 60 110
SPD 100 10.0 10 60 110
SPD 105 10.5 10 60 110
SPD 110 11.0 12 70 110
SPD 115 11.5 12 70 110
SPD 120 12.0 12 80 150
SPD 125 12.5 12 80 150
SPD 130 13.0 14 80 150
SPD 135 13.5 14 80 150
SPD 140 14.0 14 80 150
SPD 145 14.5 14 80 150
SPD 150 15.0 16 80 150
SPD 160 16.0 16 80 150
Notice
t)JHIGVODUJPOBMESJMMGPSNBDIJOJOHJOWBSJPVTDVUUJOHSBOHF4BOEXJDIUZQFESJMM(SPD)
t3FBMJ[JOHFYDFMMFOUBDDVSBDZBOETVSGBDFGJOJTI
t)JHIQSFDJTJPOQSFNJVN1$%ESJMM
332 KORLOY
Stable performance and hole quality with our unique cutting edge and
guide pad available regrinding
Gun Drill
t High efficiency in deep hole machining
t High accuracy (Hole tolerance: IT9, surface finish: Ra0.1~3.0S)
t Stable Quality due to unique cutting edge and guide pad available regrinding
t Used drill can be recycled by exchanging the carbide part
t Depending on request, the drills can change geometry of cutting edge and drive specification
t For ordering, please check length of drill
Code system
KGD S 12.05 1500 / D30

KORLOY Lib type Drill dia. (ØD) Length of drill Drive no.
Gun Drill Ø12.05
S : Single 1500 mm D30
T : Twin
Features
Single lip type Twin lip type
Shape
Drill Dia. Ø3.0 ~ Ø33.0 Ø8.0 ~ Ø24.0

Depth of drilling ≥ 2,000 mm ≥ 1,000 mm
Tolerance IT9 IT10
Surface finish Ra 0.1~3.0 μm Ra 1.0~4.0 μm
t Workpieces with good chip evacuation
Application For all kinds of workpiece machining
t Machining of at higher feed than single lip type’s
t Refer to the code system and the above drawing when ordering
t Refer to the page 112 for the size of a driver
t The overall length can be chosen by order
KORLOY
Y 333
Drill
KGDS
KGD t50-&3"/$&
Single lip type
DATA Designation description

◯.◯◯ Diameter
Length
p.535
D Driver code no.
(mm)
Designation ØD a Designation ØD a
KGDS ◯.◯◯ - /D 3.00~3.49 19 KGDS ◯.◯◯ - /D 13.00~13.99 38

KGDS ◯.◯◯ - /D 3.50~3.99 19 KGDS ◯.◯◯ - /D 14.00~14.99 38
KGDS ◯.◯◯ - /D 4.00~4.49 23 KGDS ◯.◯◯ - /D 15.00~15.99 39
KGDS ◯.◯◯ - /D 4.50~4.99 23 KGDS ◯.◯◯ - /D 16.00~16.99 39
KGDS ◯.◯◯ - /D 5.00~5.49 24 KGDS ◯.◯◯ - /D 17.00~17.99 40
KGDS ◯.◯◯ - /D 5.50~5.99 26 KGDS ◯.◯◯ - /D 18.00~18.99 41
KGDS ◯.◯◯ - /D 6.00~6.49 27 KGDS ◯.◯◯ - /D 19.00~19.99 41
KGDS ◯.◯◯ - /D 6.50~6.99 28 KGDS ◯.◯◯ - /D 20.00~20.99 44
KGDS ◯.◯◯ - /D 7.00~7.49 29 KGDS ◯.◯◯ - /D 21.00~21.99 46
KGDS ◯.◯◯ - /D 7.50~7.99 30 KGDS ◯.◯◯ - /D 22.00~22.99 49
KGDS ◯.◯◯ - /D 8.00~8.49 31 KGDS ◯.◯◯ - /D 23.00~23.99 51
KGDS ◯.◯◯ - /D 8.50~8.99 31 KGDS ◯.◯◯ - /D 24.00~24.99 52
KGDS ◯.◯◯ - /D 9.00~8.49 31 KGDS ◯.◯◯ - /D 25.00~25.99 54
KGDS ◯.◯◯ - /D 9.50~9.99 31 KGDS ◯.◯◯ - /D 26.00~26.99 54
KGDS ◯.◯◯ - /D 10.00~10.49 31 KGDS ◯.◯◯ - /D 27.00~27.99 54
KGDS ◯.◯◯ - /D 10.50~10.99 32 KGDS ◯.◯◯ - /D 28.00~28.99 54
KGDS ◯.◯◯ - /D 11.00~11.49 35 KGDS ◯.◯◯ - /D 29.00~29.99 56
KGDS ◯.◯◯ - /D 11.50~11.99 35 KGDS ◯.◯◯ - /D 30.00~30.99 59
KGDS ◯.◯◯ - /D 12.00~12.49 38 KGDS ◯.◯◯ - /D 31.00~31.99 61
KGDS ◯.◯◯ - /D 12.50~12.99 38 KGDS ◯.◯◯ - /D 32.00~32.99 61
٘ When ordering, please mark the overall length(L) and driver number(or drawing)
Available overall length

Overall length
Designation Drill dia.
250 mm 500 mm 1000 mm 1500 mm 2000 mm
3.00 ~ 3.49 ○ ○ ○
KGDS
3.50 ~ 32.99 ○ ○ ○ ○ ○
334 KORLOY
KGDT
KGD t50-&3"/$&
Twin lip type
DATA Designation description

◯.◯◯ Diameter
Length
p.535
D Driver code no.
(mm)
Designation ØD a
KGDT ◯.◯◯ - /D 8.00~8.49 38

KGDT ◯.◯◯ - /D 8.50~8.99 38
KGDT ◯.◯◯ - /D 9.00~8.49 40
KGDT ◯.◯◯ - /D 9.50~9.99 40
KGDT ◯.◯◯ - /D 10.00~10.49 40
KGDT ◯.◯◯ - /D 10.50~10.99 40
KGDT ◯.◯◯ - /D 11.00~11.49 45
KGDT ◯.◯◯ - /D 11.50~11.99 45
KGDT ◯.◯◯ - /D 12.00~12.49 45
KGDT ◯.◯◯ - /D 12.50~12.99 48
KGDT ◯.◯◯ - /D 13.00~13.99 48
KGDT ◯.◯◯ - /D 14.00~14.99 48
KGDT ◯.◯◯ - /D 15.00~15.99 48
KGDT ◯.◯◯ - /D 16.00~16.99 50
KGDT ◯.◯◯ - /D 17.00~17.99 50
KGDT ◯.◯◯ - /D 18.00~18.99 50
KGDT ◯.◯◯ - /D 19.00~19.99 50
KGDT ◯.◯◯ - /D 20.00~20.99 55
KGDT ◯.◯◯ - /D 21.00~21.99 55
KGDT ◯.◯◯ - /D 22.00~22.99 55
KGDT ◯.◯◯ - /D 23.00~23.99 60
٘ When ordering, please mark the overall length(L) and driver number(or drawing)
Available overall length

Overall length
Designation Drill dia.
250 mm 500 mm 1000 mm 1500 mm 2000 mm
KGDT 8.00 ~ 23.99 ○ ○ ○
KORLOY
Y 335
PART 3
Producct detailss
336
336 KORL
KORLOY
OY
Technical information for Reamer / Chamfer / Thread
Reamer
Chucking / Machine Reamer 340
PCD Reamer 342
Cermet Reamer 343
Broach Reamer 344
Chamfer
Chamfer Tool 345
Counter Sink 348
Thread
Thread Mill 352
TAP 374
KORLOY 337
Reamer / Chamfer / Thread

Reamer / Chamfer
Aspect
Type Designation Shape Drills dia. Page
ratio
SCRS Ø5.0 ~ Ø20.0 2D ~ 3D 340
SCRH Ø5.0 ~ Ø20.0 2D ~ 3D 340

Chucking /
Machine Reamer
TCRS Ø7.0 ~ Ø30.0 2D ~ 3D 341
Reamer TMRS Ø7.0 ~ Ø30.0 3D ~ 5D 341
PCD Reamer PDR Ø5.0 ~ Ø20.0 3D ~ 5D 342
Cermet Reamer KCR Ø6.0 ~ Ø30.0 3D ~ 7D 343
Broach Reamer HBRE Ø3.0 ~ Ø25.0 3D ~ 7D 344
CET Ø3.0 ~ Ø16.0 - 345

Chamfer
Tool
CCT Ø3.0 ~ Ø12.0 - 346
CSPC Ø6.0 ~ Ø20.0 - 348
CSNC Ø10.0 ~ Ø30.0 - 348
CSNC Ø10.0 ~ Ø30.0 - 349

Chamfer
CSHC Ø10.0 ~ Ø30.0 - 349
Counter
Sink
CSPH Ø6.3 ~ Ø25.0 - 350
CSNH Ø10.0 ~ Ø50.0 - 350
CSNH Ø10.0 ~ Ø50.0 - 351
CSHH Ø10.0 ~ Ø50.0 - 351
Tap
Surface treatment
Type Designation Shape Size range Page
Coating Uncoated
710. - ○ M3 ~ M24 376
VPTM TiN - M3 ~ M24 377

Spiral Tap
VPCM TiCN - M3 ~ M24 378
HSSE
JIS
TAP
VPHM )0.0 - M3 ~ M24 379
Spiral
7/0. - ○ M3 ~ M24 380
Point Tap
VNTM TiN - M3 ~ M24 381
338 KORLOY
Surface treatment
Type Designation Shape Size range Page
Coating Uncoated
VNCM TiCN - M3 ~ M24 382

Spiral
Point Tap
VNHM )0.0 - M3 ~ M24 383
740. - ○ M3 ~ M24 384
Straight VSTM TiN - M3 ~ M24 385

Flute Tap
VSCM TiCN - M3 ~ M24 386
VSHM )0.0 - M3 ~ M24 387

JIS
730. - ○ M3 ~ M12 388
Roll Tap VRTM TiN - M3 ~ M12 389
VRCM TiCN - M3 ~ M12 390
7'0. - ○ M3 ~ M6 391
Spiral
Roll Tap VFTM TiN - M3 ~ M6 392
VFCM TiCN - M3 ~ M6 393
720. - ○ M3 ~ M24 394
HSSE
Spiral VQTM TiN - M3 ~ M24 395
TAP
Flute Tap
VQCM TiCN - M3 ~ M24 396
VQHM )0.0 - M3 ~ M24 397
7%0. - ○ M3 ~ M24 398
VDTM TiN - M3 ~ M24 399

Spiral
Point Tap
VDCM TiCN - M3 ~ M24 400
DIN VDHM )0.0 - M3 ~ M24 401
7(0. - ○ M3 ~ M24 402
Straight VGTM TiN - M3 ~ M24 403

Flute Tap
VGCM TiCN - M3 ~ M24 404
VGHM )0.0 - M3 ~ M24 405
7.0. - ○ M3 ~ M12 406
Roll Tap
VMTM TiN - M3 ~ M12 407
VMCM TiCN - M3 ~ M12 408
KORLOY
Y 339
Chucking / Machine Reamer

SCRS Chucking reamer
1 2 1 2
Fig. 1 Fig. 2
(mm)
Designation No. of flute ØD Ød ℓ1 ℓ2 L Fig.
SCRS 050S 4 5.0 6 20 40 100 1

SCRS 060S 4 6.0 6 20 40 115 1
SCRS 070S 4 7.0 8 20 40 125 1
SCRS 080S 4 8.0 8 20 40 135 1
SCRS 090S 4 9.0 10 20 45 140 1
SCRS 100B 4 10.0 10 25 50 145 2
SCRS 110B 4 11.0 12 25 50 150 2
SCRS 120B 4 12.0 12 25 50 160 2
SCRS 130B 4 13.0 16 25 50 165 2
SCRS 140B 6 14.0 16 25 50 170 2
SCRS 150B 6 15.0 16 30 50 180 2
SCRS 160B 6 16.0 16 30 50 190 2
SCRS 180B 6 18.0 20 30 55 210 2
SCRS 200B 6 20.0 20 40 60 230 2
٘ SCRS___S : Solid type, SCRS___B : Brazing type
SCRH Chucking reamer
1 2 1 2
Fig. 1 Fig. 2
Designation No. of flute ØD Ød ℓ1 ℓ2 L Fig.
SCRH 050S 4 5.0 6 20 40 100 1

SCRH 060S 4 6.0 6 20 40 115 1
SCRH 070S 4 7.0 8 20 40 125 1
SCRH 080S 4 8.0 8 20 40 135 1
SCRH 090S 4 9.0 10 20 45 140 1
SCRH 100B 4 10.0 10 25 50 145 2
SCRH 110B 4 11.0 12 25 50 150 2
SCRH 120B 4 12.0 12 25 50 160 2
SCRH 130B 4 13.0 16 25 50 165 2
SCRH 140B 6 14.0 16 25 50 170 2
SCRH 150B 6 15.0 16 30 50 180 2
SCRH 160B 6 16.0 16 30 50 190 2
SCRH 180B 6 18.0 20 30 55 210 2
SCRH 200B 6 20.0 20 40 60 230 2
٘ SCRS___S : Solid type, SCRS___B : Brazing type
340 KORLOY
TCR
CRS Chucking reamer
(mm)
Designation No. of flute ØD ℓ L M.T No.
TCRS 070 4 7.0 20 150 1

TCRS 080 4 8.0 20 150 1
TCRS 090 4 9.0 20 160 1
TCRS 100 4 10.0 25 160 1
TCRS 110 4 11.0 25 170 1
TCRS 120 4 12.0 25 170 1
TCRS 130 4 13.0 25 180 1
TCRS 140 6 14.0 25 190 1
TCRS 150 6 15.0 30 200 2
TCRS 160 6 16.0 30 200 2
TCRS 180 6 18.0 30 220 2
TCRS 200 6 20.0 40 230 2
TCRS 250 6 25.0 40 260 3
TCRS 280 8 28.0 40 270 3
TCRS 300 8 30.0 50 290 3
TMR
MRS Machine reamer
Designation No. of flute ØD ℓ1 ℓ2 L M.T No.
TMRS 070 4 7.0 60 60 150 1

TMRS 080 4 8.0 70 70 150 1
TMRS 090 4 9.0 70 70 160 1
TMRS 100 4 10.0 75 75 170 1
TMRS 110 4 11.0 75 75 170 1
TMRS 120 4 12.0 80 40 180 1
TMRS 130 4 13.0 85 40 190 1
TMRS 140 6 14.0 90 45 210 1
TMRS 150 6 15.0 90 45 215 2
TMRS 160 6 16.0 100 50 220 2
TMRS 180 6 18.0 105 50 225 2
TMRS 200 6 20.0 120 50 240 2
TMRS 250 6 25.0 130 50 270 3
TMRS 280 8 28.0 140 50 280 3
TMRS 300 8 30.0 150 50 290 3
KORLOY
Y 341
PCD Reamer
PDR
DATA
p.536
(mm)
Designation No. of flute ØD Ød ℓ L
PDR 2050 2 5.0 6 30 65

PDR 2060 2 6.0 6 40 75
PDR 2070 2 7.0 8 40 75
PDR 2080 2 8.0 8 40 75
PDR 2090 2 9.0 10 40 85
PDR 2100 2 10.0 10 40 85
PDR 2120 2 12.0 12 50 95
PDR 2140 2 14.0 16 50 95
PDR 2150 2 15.0 16 50 100
PDR 4160 4 16.0 16 50 100
PDR 4180 4 18.0 20 60 110
PDR 4200 4 20.0 20 60 110
342 KORLOY
Cermet Reamer
KCR
KC Standard type
DATA
p.537
ØD Ød
(mm)
No. of flute ØD Ød ℓ L
KCR 060~079-25-70L 2 6.0~7.9 8 25 70

KCR 080~099-035-90L 2 8.0~9.9 10 35 90
KCR 100~119-050-100L 4 10.0~11.9 12 50 100
KCR 120~159-060-110L 4 12.0~15.9 12 60 110
KCR 160~199-060-110L 4 16.0~19.9 16 60 110
KCR 200~259-060-110L 4 20.0~25.9 20 60 110
KCR 260~300-070-130L 4 26.0~30.0 25 70 130
٘ Customizing tools are available
(Maximum overhang length should be less than 150mm.)
Special type
C
α
ØD Ød
ℓ1
ℓ2
L
(mm)
Designation No. of flute ØD Ød ℓ1 ℓ2 L α°
KCR ~ - L 2~4 8.0~25.9 12~30 7~18 2~15 70 10˚~ 60˚
KORLOY
Y 343
Broach Reamer
HBRE
ØD Ød
1
ℓ
ℓ2
L
(mm)
Designation No. of flute ØD Ød ℓ1 ℓ2 L Type
HBRE 030 3 3.0 3 20 40 70 Solid

HBRE 040 3 4.0 4 25 40 70 Solid
HBRE 060 4 6.0 6 30 50 80 Solid
HBRE 080 4 8.0 8 30 60 100 Solid
HBRE 100 4 10.0 10 30 60 100 Solid
HBRE 120 4 12.0 12 40 70 120 Top Solid
HBRE 160 6 16.0 16 40 80 130 Top Solid
HBRE 200 6 20.0 20 50 90 150 Top Solid
HBRE 250 6 25.0 25 50 90 150 Top Solid
344 KORLOY
Chamfer Tool
CET
(mm)
ØD Ød ℓ L α°
CET060 030 3.0 3 5.5 50

CET060 040 4.0 4 7 50
CET060 060 6.0 6 10 60
CET060 080 8.0 8 13 70 60°
CET060 100 10.0 10 16 70
CET060 120 12.0 12 18 80
CET060 160 16.0 16 24 100
CET090 030 3.0 3 5.5 50
CET090 040 4.0 4 7 50
CET090 060 6.0 6 10 60
CET090 080 8.0 8 13 70 90°
CET090 100 10.0 10 16 70
CET090 120 12.0 12 18 80
CET090 160 16.0 16 24 100
CET120 030 3.0 3 5.5 50
CET120 040 4.0 4 7 50
CET120 060 6.0 6 10 60
CET120 080 8.0 8 13 70 120°
CET120 100 10.0 10 16 70
CET120 120 12.0 12 18 80
CET120 160 16.0 16 24 100
KORLOY
Y 345
Chamfer
Chamfer Tool
CCT
CC
Fig 1 Fig 2
(mm)
Designation ØD = Ød ØD1 L α° Fig.
CCT060 030 3.0 1.0 40

CCT060 040 4.0 1.5 40
CCT060 060 6.0 2.0 50
CCT060 080 8.0 2.5 60 1
CCT060 100 10.0 3.0 70
CCT060 120 12.0 4.0 80
CCT060 160 16.0 5.0 100
CCT060T 030 3.0 1.0 40
CCT060T 040 4.0 1.5 40
CCT060T 060 6.0 2.0 50
60°
CCT060T 080 8.0 2.5 60
CCT060T 100 10.0 3.0 70
CCT060T 120 12.0 4.0 80
CCT060T 160 16.0 5.0 100 2
CCT060T 030L 3.0 1.0 100
CCT060T 040L 4.0 1.5 100
CCT060T 060L 6.0 2.0 100
CCT060T 080L 8.0 2.5 120
CCT060T 100L 10.0 3.0 120
CCT060T 120L 12.0 4.0 150
CCT090 030 3.0 1.0 40
CCT090 040 4.0 1.5 40
CCT090 060 6.0 2.0 50
CCT090 080 8.0 2.5 60 1
CCT090 100 10.0 3.0 70
CCT090 120 12.0 4.0 80
CCT090 160 16.0 5.0 100
CCT090T 030 3.0 1.0 40
CCT090T 040 4.0 1.5 40
CCT090T 060 6.0 2.0 50
90°
CCT090T 080 8.0 2.5 60
CCT090T 100 10.0 3.0 70
CCT090T 120 12.0 4.0 80
CCT090T 160 16.0 5.0 100 2
CCT090T 030L 3.0 1.0 100
CCT090T 040L 4.0 1.5 100
CCT090T 060L 6.0 2.0 100
CCT090T 080L 8.0 2.5 120
CCT090T 100L 10.0 3.0 120
CCT090T 120L 12.0 4.0 150
CCT120 030 3.0 1.0 40
CCT120 040 4.0 1.5 40
120° 1
CCT120 060 6.0 2.0 50
CCT120 080 8.0 2.5 60
346 KORLOY
CCT
CC
Fig 1 Fig 2
(mm)
Designation ØD = Ød ØD1 L α° Fig.
CCT120 100 10.0 3.0 70

CCT120 120 12.0 4.0 80 120° 1
CCT120 160 16.0 5.0 100
CCT120T 030 3.0 1.0 40
CCT120T 040 4.0 1.5 40
CCT120T 060 6.0 2.0 50
CCT120T 080 8.0 2.5 60
CCT120T 100 10.0 3.0 70
CCT120T 120 12.0 4.0 80
CCT120T 160 16.0 5.0 100 120° 2
CCT120T 030L 3.0 1.0 100
CCT120T 040L 4.0 1.5 100
CCT120T 060L 6.0 2.0 100
CCT120T 080L 8.0 2.5 120
CCT120T 100L 10.0 3.0 120
CCT120T 120L 12.0 4.0 150
CET/CCT Application example

Chamfering Chamfering
Centering Hole Chamfering Side milling Slot milling
(External) (Internal)
Application
(CET)
60° × ● ● ●~▲ ● ×
90° ▲ ● ● ● ● ●~▲
120° ● ● ● ● ● ●
Application
(CCT)
60° ● ● ●~▲ ▲~× × ×
90° ● ● ●~▲ ▲~× × ×
120° ● ● ● ● × ●
KORLOY
Y 347
Counter Sink
CSPC3000 t50-&3"/$&
Unequal Substrate DATA ØD Ød
Division
/Lead PC40T All sizes ±0.5mm h6
p.537
(mm)
Designation ØD Ød ØD1 L α°
CSPC 3060-050 6.0 6 1.5 50 90˚

CSPC 3080-060 8.0 8 2 60 90˚
CSPC 3100-070 10.0 10 2.5 70 90˚
CSPC 3120-075 12.0 12 2.8 75 90˚
CSPC 3160-080 16.0 16 3.2 80 90˚
CSPC 3200-090 20.0 20 3.5 90 90˚
CSNC 3000 t50-&3"/$&
Straight
Type PC20T All sizes ±1.0mm h9
p.537
(mm)
Designation ØD Ød Range of dia L α°
CSNC 3100-047 10.0 6 2.0~9.0 47 90˚

CSNC 3150-053 15.0 8 3.0~14.0 53 90˚
CSNC 3200-057 20.0 10 4.0~19.0 57 90˚
CSNC 3250-067 25.0 12 5.0~24.0 67 90˚
CSNC 3300-075 30.0 12 6.0~29.0 75 90˚
٘ Order made available
348 KORLOY
CSN
SNC 1000 t50-&3"/$&
Straight
p.537
(mm)
CSNC 1100-048 10.0 6 2.0~9.0 48 90˚

CSNC 1150-054 15.0 8 2.0~14.0 54 90˚
CSNC 1200-059 20.0 10 2.0~19.0 59 90˚
CSNC 1250-069 25.0 12 3.0~24.0 69 90˚
CSNC 1300-077 30.0 12 4.0~29.0 77 90˚
CSH
SHC 1000 t50-&3"/$&
Hole
p.537
(mm)
CSHC 1100-045 10.0 6 4.0~8.0 45 90˚

CSHC 1150-055 15.0 8 5.0~12.0 55 90˚
CSHC 1200-070 20.0 10 8.0~15.0 70 90˚
CSHC 1250-075 25.0 12 10.0~20.0 75 90˚
CSHC 1300-085 30.0 12 12.0~25.0 85 90˚
٘ Order made available
KORLOY
Y 349
Chamfer
Counter Sink
CSP
SPH3000 t50-&3"/$&
Unequal Substrate DATA ØD Ød
Division
/Lead HC40T All sizes ±0.5mm h8
p.537
(mm)
Designation ØD Ød ØD1 L α°
CSPH 3060-045 6.3 5 1.5 45 90˚

CSPH 3080-050 8.3 6 2.0 50 90˚
CSPH 3100-050 10.4 6 2.5 50 90˚
CSPH 3120-056 12.4 8 2.8 56 90˚
CSPH 3160-060 16.5 10 3.2 60 90˚
CSPH 3200-063 20.5 10 3.5 63 90˚
CSPH 3250-068 25.0 10 3.8 68 90˚
CSN
SNH 3000 t50-&3"/$&
Straight
HC10T ±1.0mm
Type All sizes h9
HC20T ±1°
p.538
CSNH 3100-050 10 6 3~9 50 90˚

CSNH 3150-055 15 8 3~14 55 90˚
CSNH 3200-060 20 10 4~19 60 90˚
CSNH 3250-068 25 12 5~24 68 90˚
CSNH 3300-079 30 12 6~29 79 90˚
CSNH 3350-085 35 12 7~34 85 90˚
CSNH 3400-090 40 12 8~39 90 90˚
CSNH 3450-095 45 16 9~44 95 90˚
CSNH 3500-100 50 16 12~49 100 90˚
350 KORLOY
CSN
SNH 1000 t50-&3"/$&
Straight
Type HC10T All sizes ±1.0mm h9
HC20T
p.538
(mm)
CSNH 1100-070 10 6 2~9 50 90˚

CSNH 1150-075 15 8 2~14 55 90˚
CSNH 1200-090 20 10 2~19 60 90˚
CSNH 1250-080 25 12 2~24 70 90˚
CSNH 1300-090 30 12 6~29 75 90˚
CSNH 1350-080 35 12 7~34 80 90˚
CSNH 1400-085 40 12 8~39 85 90˚
CSNH 1450-087 45 12 9~44 87 90˚
CSNH 1500-090 50 12 12~49 90 90˚
CSH
SHH 1000 t50-&3"/$&
Hole
Type HC10T All sizes ±1.0mm h9
HC20T
p.538
CSHH 1100-070 10 6 3~9 50 90˚

CSHH 1150-075 15 8 5~12 60 90˚
CSHH 1200-090 20 10 8~15 65 90˚
CSHH 1250-080 25 12 10~20 74 90˚
CSHH 1300-090 30 12 12~25 85 90˚
CSHH 1350-095 35 16 14~30 95 90˚
CSHH 1400-105 40 16 16~35 105 90˚
CSHH 1450-120 45 16 18~40 120 90˚
CSHH 1500-130 50 16 20~45 130 90˚
KORLOY
Y 351
Thread Mill
ISO Metric Helical flutes with thru-hole coolant
Internal
Internal
Defined by : R262 (DIN 13)
Tolerance class : 6H
External
(ℓ2 1.5 × Thread Diameter)
Thread Pitch Dimensions (mm) No.of flute Tooth *Bore dia.

Designation PC9070M
M Coarse M Fine (mm) Ød D L ℓ1 ℓ2 z zt mm
M3×0.5 M3.5~M16×0.5 0.50 STMHC 04024L04-I0.50ISO 4 2.40 45 4.5 4.7 3 9 2.5
M4×0.7 - 0.70 04031L06-I0.70ISO 4 3.15 45 6.3 6.6 3 9 3.3
M5×0.8 - 0.80 04039L07-I0.80ISO 4 3.90 45 7.2 7.6 3 9 4.2
M6×1.0 M8~M40×1.0 1.00 06048L09-I1.00ISO 6 4.80 57 9.0 9.5 3 9 5.0
M8×1.25 - 1.25 08065L13-I1.25ISO 8 6.50 61 12.5 13.1 3 10 6.8
M10×1.5 M12~M48×1.5 1.50 10082L15-I1.50ISO 10 8.20 73 15.0 15.7 3 10 8.5
M12×1.75 - 1.75 10099L18-I1.75ISO 10 9.90 73 17.5 18.4 4 10 10.2
M14×2.0 M17~M80×2.0 2.00 12116L21-I2.00ISO 12 11.60 73 20.0 21.0 4 10 12.0
M16×2.0 M17~M80×2.0 2.00 14136L25-I2.00ISO 14 13.60 92 24.0 25.0 4 12 14.0
(ℓ2 2 × Thread Diameter)

Designation PC9070M
M3×0.5 M3.5~M16×0.5 0.50 STMHC 04024L06-I0.50ISO 4 2.40 45 6.0 6.2 3 12 2.5
- M4×0.5 0.50 04032L08-I0.50ISO 4 3.20 45 8.0 8.2 3 16 3.5
- M5×0.5 0.50 06042L10-I0.50ISO 6 4.20 57 10.0 10.2 3 20 4.5
M4×0.7 - 0.70 04031L08-I0.70ISO 4 3.15 45 8.4 8.7 3 12 3.3
- M6×0.75 0.75 06050L12-I0.75ISO 6 5.00 57 12.0 12.4 3 16 5.3
M5×0.8 - 0.80 04039L10-I0.80ISO 4 3.90 45 10.4 10.8 3 13 4.2
M6×1.0 M8~M40×1.0 1.00 06048L12-I1.00ISO 6 4.80 57 12.0 12.5 3 12 5.0
- M8×1.0 1.00 08067L16-I1.00ISO 8 6.70 61 16.0 16.5 3 16 7.0
- M10×1.0 1.00 10087L20-I1.00ISO 10 8.70 73 20.0 20.5 3 20 9.0
- M12×1.0 1.00 12107L24-I1.00ISO 12 10.70 73 24.0 24.5 4 24 11.0
M8×1.25 - 1.25 08065L16-I1.25ISO 8 6.50 61 16.2 16.9 3 13 6.8
- M10×1.25 1.25 10085L20-I1.25ISO 10 8.50 73 20.0 20.6 3 16 8.8
M10×1.5 M12~M48×1.5 1.50 10082L20-I1.50ISO 10 8.20 73 19.5 20.2 3 13 8.5
- M12×1.5 1.50 10099L24-I1.50ISO 10 9.90 73 24.0 24.7 4 16 10.5
- M14×1.5 1.50 12119L29-I1.50ISO 12 11.90 80 28.5 29.2 4 19 12.5
- M16×1.5 1.50 14139L32-I1.50ISO 14 13.90 92 31.5 32.2 4 21 14.5
M12×1.75 - 1.75 10099L25-I1.75ISO 10 9.90 73 24.5 25.4 4 14 10.2
M14×2.0 M17~M80×2.0 2.00 12116L29-I2.00ISO 12 11.60 80 28.0 29.0 4 14 12.0
M16×2.0 M17~M80×2.0 2.00 14136L33-I2.00ISO 14 13.60 92 32.0 33.0 4 16 14.0
M18×2.5 - 2.50 16148L36-I2.50ISO 16 14.80 92 35.0 36.2 4 14 15.5
M 20×2.5 - 2.50 18171L41-I2.50ISO 18 17.10 102 40.0 41.2 4 16 17.5
M 24×3.0 - 3.00 20199L49-I3.00ISO 20 19.90 102 48.0 49.5 4 16 21.0
Pitch ●: Stock item
* Bore Diameter applies to smallest thread Dia * Maximum thread length = ℓ2 -
4
352 KORLOY
American UN (UNC,UNF,UNEF) Helical flutes with thru-hole coolant
Internal
Internal
Defined by : ANSI B1.1.74
Tolerance class : 2B
External

Designation PC9070M
UNC UNF UNEF (tpi) Ød D L ℓ1 ℓ2 z zt mm
No.10~24 5/16˝ ,3/8˝×24 9/16˝~11/16˝×24 24 STMHC 04035L07-I24UNC 4 3.58 45 7.4 7.9 3 7 3.8
No.10~24 5/16˝ ,3/8˝×24 9/16˝~11/16˝×24 24 06041L08-I24UNC 6 4.15 57 8.5 9.0 3 8 4.5
1/4˝×20 7/16˝ ,1/2˝×20 3/4˝~1˝×20 20 06048L09-I20UNC 6 4.88 57 8.9 9.5 3 7 5.2
5/16˝×18 9/16˝ ,5/8˝×18 11/16˝~1 11/16˝×18 18 08061L11-I18UNC 8 6.15 61 11.3 12.0 3 8 6.5
3/8˝×16 3/4˝×16 - 16 08076L15-I16UNC 8 7.65 61 14.3 15.1 3 9 8.0
7/16˝×14 7/8˝×14 - 14 10090L17-I14UNC 10 9.00 73 16.3 17.2 3 9 9.3
1/2˝×13 - - 13 12104L20-I13UNC 12 10.35 73 19.5 20.5 4 10 10.8
9/16˝×12 1˝~1 1/2˝×12 - 12 12118L22-I12UNC 12 11.80 73 21.2 22.2 4 10 12.3

Designation PC9070M
UNC UNF UNEF (tpi) Ød D L ℓ1 ℓ2
z zt mm
- No.10~32 No. 12~3/8˝×32 32 STMHC 04038L09-I32UNF 4 3.80 45 9.5 9.9 3 12 4.0
- - No. 12~3/8˝×32 32 06044L11-I32UNEF 6 4.40 57 11.1 11.5 3 14 4.7
- No.12, 1/4˝×28 7/16˝; 1/2˝×28 28 06043L11-I28UNF 6 4.30 57 10.9 11.3 3 12 4.6
- 1/4˝×28 7/16˝; 1/2˝×28 28 06052L13-I28UNF 6 5.15 57 12.7 13.1 3 14 5.5
- - 7/16˝; 1/2˝×28 28 10099L22-I28UNEF 10 9.90 73 21.8 22.2 3 24 10.2
No.10~24 5/16˝, 3/8˝×24 9/16˝~11/16˝×24 24 04035L10-I24UNC 4 3.58 45 9.5 10.0 3 9 3.8
No.12~24 5/16˝, 3/8˝×24 9/16˝~11/16˝×24 24 06041L11-I24UNC 6 4.15 57 10.6 11.1 3 10 4.5
- 5/16˝, 3/8˝×24 9/16˝~11/16˝×24 24 08066L16-I24UNF 8 6.68 61 15.9 16.4 3 15 6.8
- 3/8˝×24 9/16˝~11/16˝×24 24 10082L19-I24UNF 10 8.20 73 19.0 19.6 3 18 8.5
- - 9/16˝~11/16˝×24 24 14129L29-I24UNEF 14 12.90 92 28.6 29.1 4 27 13.2
1/4˝×20 7/16˝, 1/2˝×20 3/4˝~1˝×20 20 06048L13-I20UNC 6 4.88 57 12.7 13.3 3 10 5.2
- 7/16˝, 1/2˝×20 3/4˝~1˝×20 20 10096L22-I20UNF 10 9.60 73 21.6 22.2 3 17 9.8
- 1/2˝×20 3/4˝~1˝×20 20 12111L26-I20UNF 12 11.10 80 25.4 26.0 3 20 11.5
- - 3/4˝~1˝×20 20 18174L38-I20UNEF 18 17.40 102 38.1 38.7 4 30 17.8
5/16˝×18 9/16˝, 5/8˝×18 11/16˝~1 11/16˝×18 18 08061L16-I18UNC 8 6.15 61 15.5 16.2 3 11 6.5
- 9/16˝, 5/8˝×18 11/16˝~1 11/16˝×18 18 14125L28-I18UNF 14 12.50 92 28.2 28.9 4 20 12.8
- 5/8˝×18 11/16˝~1 11/16˝×18 18 16141L31-I18UNF 16 14.10 92 31.0 31.7 4 22 14.5
3/8˝×16 3/4˝×16 - 16 08076L19-I16UNC 8 7.65 61 19.0 19.8 3 12 8.0
- 3/4˝×16 - 16 18170L38-I16UNF 18 17.00 102 38.1 38.8 4 24 17.5
7/16˝×14 7/8˝×14 - 14 10090L22-I14UNC 10 9.00 73 21.8 22.7 3 12 9.3
- 7/8˝×14 - 14 20199L44-I14UNF 20 19.90 102 43.5 44.4 4 24 20.5
1/2˝×13 - - 13 12104L26-I13UNC 12 10.35 80 25.4 26.4 4 13 10.8
9/16˝×12 1˝~1 1/2˝×12 - 12 12118L28-I12UNC 12 11.80 80 27.5 28.6 4 13 12.3
- 1˝~1 1/2˝×12 - 12 20199L51-I12UNF 20 19.90 102 50.8 51.9 4 24 23.5
5/8˝×11 - - 11 14131L33-I11UNC 14 13.10 92 32.3 33.5 4 14 13.5
3/4˝×10 - - 10 16159L39-I10UNC 16 15.90 92 38.1 39.4 4 15 16.5
7/8˝×9 - - 9 20190L46-I9UNC 20 19.00 102 45.2 46.6 4 16 19.5
1˝×8 - - 8 20199L52-I8UNC 20 19.90 102 50.8 52.4 4 16 22.0
2 Pitch ●: Stock item
* Bore Diameter applies to smallest thread Dia * Maximum thread length = ℓ -
4
KORLOY 353
Thread
Thread Mill
Whitworth (BSW,BSF) Helical flutes with thru-hole coolant
Internal
External / Internal
Defined by : B.S.84 : 1956,
DIN 259, ISO228/1 : 1982
Tolerance class : Medium class A
External

Designation PC9070M
BSW BSF (tpi) Ød D L ℓ1 ℓ2 z zt mm
- 1/4˝×26 26 STMHC 06050L13-EI26BSF 6 5.00 57 12.7 13.2 3 13 5.3
- 5/16˝×22 22 08063L16-EI22BSF 8 6.35 61 16.2 16.7 3 14 6.7
1/4˝×20 3/8˝×20 20 06044L13-EI20BSW 6 4.45 57 12.7 13.3 3 10 5.0
- 3/8˝×20 20 08076L19-EI20BSF 8 7.65 61 19.0 19.7 3 15 8.2
5/16˝×18 7/16˝×18 18 06058L16-EI18BSW 6 5.85 57 15.5 16.2 3 11 6.5
- 7/16˝×18 18 10092L23-EI18BSF 10 9.20 73 22.6 23.3 3 16 9.7
3/8˝×16 1/2˝, 9/16˝×16 16 08072L19-EI16BSW 8 7.20 61 19.0 19.8 3 12 7.9
- 1/2˝, 9/16˝×16 16 12105L26-EI16BSF 12 10.50 80 25.4 26.2 4 16 11.1
- 9/16˝×16 16 14122L29-EI16BSF 14 12.15 92 28.6 29.4 4 18 12.6
7/16˝×14 5/8˝, 11/16˝×14 14 10085L22-EI14BSW 10 8.50 73 21.8 22.7 3 12 9.2
- 5/8˝, 11/16˝×14 14 14134L31-EI14BSF 14 13.40 92 30.8 31.7 4 17 14.0
- 11/16˝×14 14 16150L35-EI14BSF 16 15.00 92 34.5 35.4 4 19 15.6
1/2˝×12 3/4˝×12 12 10096L26-EI12BSW 10 9.65 73 25.4 26.5 3 12 10.5
9/16˝×12 3/4˝×12 12 12113L28-EI12BSW 12 11.25 80 27.5 28.6 4 13 12.1
- 3/4˝×12 12 18162L39-EI12BSF 18 16.20 102 38.1 39.2 4 18 16.8
5/8˝×11 7/8˝×11 11 14126L33-EI11BSW 14 12.60 92 32.3 33.5 4 14 13.4
11/16˝×11 - 11 16142L35-EI11BSW 16 14.20 92 34.6 35.8 4 15 15.0
4
354 KORLOY
BSP(G) Helical flutes with thru-hole coolant
Internal
External / Internal
Defined by : B.S.2779:1956
Tolerance class : Medium class
External

Designation PC9070M
Standard (tpi) Ød D L ℓ1 ℓ2 z zt mm
1/16˝, 1/8˝x28 28 STMHC 08064L12-EI28BSP 8 6.4 61 11.8 12.2 3 13 6.7
1/8˝x28 28 10082L15-EI28BSP 10 8.2 73 14.5 15.0 3 16 8.7
1/4˝, 3/8˝x19 19 12110L20-EI19BSP 12 11.0 80 20.1 20.7 4 15 11.8
3/8˝x19 19 16145L26-EI19BSP 16 15.2 92 25.4 26.1 4 19 15.2
1˝-4˝x11 11 20199L42-EI11BSP 20 30.7 102 41.6 42.7 4 18 30.7

Designation PC9070M
1/16˝, 1/8˝x28 28 STMHC 08064L15-EI28BSP 8 6.4 61 11.8 15.9 3 13 6.7
1/8˝x28 28 10082L19-EI28BSP 10 8.2 73 14.5 19.5 3 16 8.7
1/4˝, 3/8˝x19 19 12110L27-EI19BSP 12 11.0 80 20.1 27.4 4 15 11.8
3/8˝x19 19 16145L34-EI19BSP 16 15.2 92 33.4 34.1 4 25 15.2
1/2˝-7/8˝x14 14 18179L42-EI14BSP 18 19.0 102 41.7 42.6 4 23 19.0

4
KORLOY 355
Thread
Thread Mill
NPT Helical flutes with thru-hole coolant
Internal
External / Internal
Defined by : USAS B2.1:1968
Tolerance class : Standard NPT
External

Designation PC9070M
1/16˝×27 27.0 STMHC 06059L09-EI27NPT 6 5.90 57 9.4 9.9 3 10 6.3
1/8˝×27 27.0 08076L09-EI27NPT 8 7.65 61 9.4 9.9 3 10 8.5
1/4˝×18 18.0 10099L14-EI18NPT 10 9.90 73 14.1 14.8 3 10 11.1
3/8˝×18 18.0 12111L14-EI18NPT 12 11.15 73 14.1 14.8 4 10 14.5
1/2˝, 3/4˝×14 14.0 16142L19-EI14NPT 16 14.25 92 18.1 19.0 4 10 17.7, 23.0
1˝, 1 1/14, 1 1/2˝, 2˝×11.5 11.5 20196L23-EI11.5NPT 20 19.60 102 22.1 23.2 4 10 29.0, 37.7, 44.0, 56.0
2 1/2˝×8 ; 3˝×8 8.0 20196L33-EI8NPT 20 19.60 102 31.7 33.3 4 10 66.5, 82.1
NPTF Helical flutes with thru-hole coolant
Internal
External / Internal
Defined by : ANSI 1.20.3-1976
Tolerance class : Standard NPTF
External

Designation PC9070M
1/16˝×27 27.0 STMHC 06059L09-EI27NPTF 6 5.90 57 9.4 9.9 3 10 6.3
1/8˝×27 27.0 08076L09-EI27NPTF 8 7.65 61 9.4 9.9 3 10 8.5
1/4˝×18 18.0 10099L14-EI18NPTF 10 9.90 73 14.1 14.8 3 10 11.1
3/8˝×18 18.0 12111L14-EI18NPTF 12 11.15 73 14.1 14.8 4 10 14.5
1/2˝, 3/4˝×14 14.0 16142L19-EI14NPTF 16 14.25 92 18.1 19.0 4 10 17.7, 23.4
1˝, 1 1/14, 1 1/2˝, 2˝×11.5 11.5 20196L23-EI11.5NPTF 20 19.60 102 22.1 23.2 4 10 29.0, 37.7, 43.7, 55.6
2 1/2˝×8 ; 3˝×8 8.0 20196L33-EI8NPTF 20 19.60 102 31.7 33.3 4 10 66.3, 82.1
4
356 KORLOY
BSPT Helical flutes with thru-hole coolant
Internal
External / Internal
Tolerance class : Standard BSPT
External

Designation PC9070M
1/16˝×28 28 STMHC 06059L10-EI28BSPT 6 5.90 57 10.0 10.2 3 11 6.7
1/8˝×28 28 08076L10-EI28BSPT 8 7.65 61 10.0 10.2 3 11 8.7
1/4˝×19 19 10099L15-EI19BSPT 10 9.90 73 14.7 15.4 3 11 11.8
3/8˝×19 19 12111L15-EI19BSPT 12 11.15 73 14.7 15.4 4 11 15.2
1/2˝, 3/4˝×14 14 16142L22-EI14BSPT 16 14.25 92 21.8 22.7 4 12 19.0
1˝, 1 1/2˝, 2˝, 2 1/2˝×11 11 20196L28-EI11BSPT 20 19.60 102 27.7 28.9 4 12 30.7
UNJ Helical flutes with thru-hole coolant
Internal
5/16P
Internal
Defined by : MIL-S-8879C
R max 0.18042P
R min 0.15011P External

Designation PC9070M
UNJC UNJF UNFEF/UNJ (tpi) Ød D L ℓ1 ℓ2 z zt mm
0.138˝(#6) 0.190˝(#10) 0.216(#12)/0.4375(7/16˝) 32 STMHC 04027L07-I32UNJ 4 2.7 45 7.1 7.5 3 9 2.80
- 0.250˝(1/4˝) 0.4375˝(7/16˝)/0.5625˝(9/16˝) 28 06054L13-I28UNJ 6 5.4 57 12.7 13.1 3 14 5.60
0.190˝(#10) 0.3125˝(5/16˝) 0.5625˝(9/16˝)/- 24 04037L09-I24UNJ 4 3.7 45 9.5 10.0 3 9 4.00
- 0.3125˝(5/16˝) 0.5625˝(9/16˝)/- 24 08067L15-I24UNJ 8 6.7 61 15.9 16.4 3 15 7.00
0.250˝(1/4˝) 0.4375˝(7/16˝) 0.750˝(3/4˝)/0.3125˝(5/16˝) 20 06050L12-I20UNJ 6 5.0 57 12.7 13.3 3 10 5.30
- 0.4375˝(7/16˝) 0.750˝(3/4˝)/0.5625˝(9/16˝) 20 10096L21-I20UNJ 10 9.6 73 21.6 22.2 4 17 10.00
0.3125˝(5/16˝) 0.5625˝(9/16˝) 1.0625˝(1 1/16˝)/- 18 08064L15-I18UNJ 8 6.4 61 15.5 16.2 3 11 6.75
0.375˝(3/8˝) 0.750˝(3/4˝) -/0.4375˝(7/16˝) 16 08077L19-I16UNJ 8 7.7 61 19.1 19.8 3 12 8.10
0.4375˝(7/16˝) 0.875˝(7/8˝) - 14 10092L21-I14UNJ 10 9.2 73 21.8 22.7 4 12 9.50
0.500˝(1/2˝) - - 13 10099L25-I13UNJ 10 9.9 73 25.4 26.4 4 13 11.00

4
KORLOY 357
Thread
Thread Mill
ISO Metric Helical flutes with radial cooling
Internal
Internal
External
(ℓ 2 × Thread Diameter)

Designation PC9070M
M6×1.0 M8~M40×1.0 1.0 STMHCR 06048L12-I1.00ISO 6 4.8 57 12.0 12.5 3 12 5.0
M10×1.0 1.0 10087L20-I1.00ISO 10 8.7 73 20.0 20.5 3 20 9.0
M12×1.0 1.0 12107L24-I1.00ISO 12 10.7 73 24.0 24.5 4 24 11.0
M8×1.25 1.25 08065L16-I1.25ISO 8 6.5 64 16.3 16.9 3 13 6.8
M10×1.5 M12~M48×1.5 1.5 10082L20-I1.50ISO 10 8.2 73 19.5 20.3 3 13 8.5
M12×1.5 1.5 10099L24-I1.50ISO 10 9.9 73 24.0 24.8 4 16 10.5
M14×1.5 1.5 12119L29-I1.50ISO 12 11.9 84 28.5 29.3 4 19 12.5
M16×1.5 1.5 14139L32-I1.50ISO 14 13.9 84 31.5 32.3 4 21 14.5
M12×1.75 1.75 10099L25-I1.75ISO 10 9.9 73 24.5 25.4 4 14 10.2
ISO Metric Helical flutes with thru-hole coolant-thru & Chamfer
Internal
Internal
External

Designation PC9070M
M Coarse M Fine (mm) Ød D Dc L ℓ1 ℓ2 Lc z zt mm
M6×1.0 M8~M40×1.0 1.0 STMHCC 08048L12-I1.00ISO 8 4.8 6.3 61 12.0 12.5 13.3 3 12 5.0
M10×1.0 1.0 12087L20-I1.00ISO 12 8.7 10.3 73 20.0 20.5 21.3 3 20 9.0
M12×1.0 1.0 14107L24-I1.00ISO 14 10.7 12.3 80 24.0 24.5 25.3 4 24 11.0
M8×1.25 1.25 10065L16-I1.25ISO 10 6.5 8.3 73 16.3 16.9 17.8 3 13 6.8
M10×1.5 M12~M48×1.5 1.5 12082L20-I1.50ISO 12 8.2 10.3 80 19.5 20.3 21.3 3 13 8.5
M12×1.5 1.5 14099L24-I1.50ISO 14 9.9 12.3 80 24.0 24.8 26.0 4 16 10.5
M14×1.5 1.5 16119L29-I1.50ISO 16 11.9 14.3 92 28.5 29.3 30.5 4 19 12.5
M16×1.5 1.5 18139L32-I1.50ISO 18 13.9 16.3 92 31.5 32.3 33.5 4 21 14.5
M12×1.75 1.75 14099L25-I1.75ISO 14 9.9 12.3 80 24.5 25.4 26.6 4 14 10.2
2 Pitch ●: Stock item
* Bore Diameter applies to smallest thread Dia * Maximum thread length = ℓ -
4
358 KORLOY
ISO Metric Drill, Chamfer & Thread with thru-hole coolant
Internal
Internal
External
Thread Pitch Dimensions (mm) No.of flute Tooth

Designation PC9070M
ISO 2D M Coarse (mm) L ℓ3 ℓ1 ℓ2 W Le D Ød D1 Dc D2 z zt
M6×1.0 1.0 STMHCD IM6×1.0ISO-2D 62.0 14.5 13.7 36 1.0 12.7 5.0 8 6.6 6.3 4.85 2 11
M8×1.25 1.25 IM8×1.25ISO-2D 74.0 18.2 17.1 40 1.3 15.8 6.8 10 9.0 8.3 6.45 2 11
M10×1.5 1.5 IM10×1.5ISO-2D 79.0 23.4 22.1 45 1.5 20.6 8.5 12 11.0 10.3 8.08 2 12
M12×1.75 1.75 IM12×1.75ISO-2D 89.0 27.1 25.5 45 1.5 24.0 10.3 14 13.5 12.3 9.74 2 12

Designation PC9070M
ISO 2.5D M Coarse (mm) L ℓ3 ℓ1 ℓ2 W Le D Ød D1 Dc D2 z zt
M6×1.0 1.0 STMHCD IM6×1.0ISO-2.5D 62.0 16.5 15.7 36 1.0 14.7 5.0 8 6.6 6.3 4.85 2 13
M8×1.25 1.25 IM8×1.25ISO-2.5D 74.0 23.2 22.1 40 1.3 20.8 6.8 10 9.0 8.3 6.45 2 15
M10×1.5 1.5 IM10×1.5ISO-2.5D 79.0 27.9 26.6 45 1.5 25.1 8.5 12 11.0 10.3 8.08 2 15
4
KORLOY 359
Thread
Thread Mill
ISO Metric Helical flutes
D L
Internal
ê
External / Internal
Tolerance class : 6g/6H Ød
External
External (ℓ 2 × Thread Diameter)

Designation PC9070M
M Coarse M Fine (mm) Ød D L ℓ z zt
M3x0.5 - 0.50 STMH 04039L06-E0.50ISO 4 3.9 45 6 3 12
M4.5x0.7 - 0.75 04039L09-E0.75ISO 4 3.9 45 9 3 12
M6x1.0 - 1.00 04039L12-E1.00ISO 4 3.9 45 12 3 12
M8x1.25 - 1.25 06059L16-E1.25ISO 6 5.9 57 16.25 3 13
M10x1.5 - 1.50 08079L21-E1.50ISO 8 7.9 63 21 3 14
M14x2.0 - 2.00 10099L28-E2.00ISO 10 9.9 73 28 4 14
Internal (ℓ 2 × Thread Diameter)

Designation PC9070M
M Coarse M Fine (mm) Ød D L ℓ z zt mm
M3x0.5 M3.5-M16x0.5 0.50 STMH 04022L06-I0.50ISO 4 2.2 45 6.0 3 12 2.5
- M4x0.5 0.50 04030L08-I0.50ISO 4 3.0 45 8.0 3 16 3.5
- M3x0.5 0.50 04039L10-I0.50ISO 4 3.9 45 6.0 3 12 4.5
M4x0.7 - 0.70 04028L08-I0.70ISO 4 2.8 45 8.4 3 12 3.3
- M6x0.75 0.75 04039L12-I0.75ISO 4 3.9 45 9.0 3 12 5.3
M5x0.8 - 0.80 04035L10-I0.80ISO 4 3.5 45 10.4 3 13 4.2
M6x1.0 M8-M40x1.0 1.00 04039L12-I1.00ISO 4 3.9 45 12.0 3 12 5.0
- M8x1.0 1.00 06059L16-I1.00ISO 6 5.9 57 16.0 3 16 7.0
- M10x1.0 1.00 08079L20-I1.00ISO 8 7.9 63 20.0 3 20 9.0
- M12x1.0 1.00 10099L24-I1.00ISO 10 3.9 45 12.0 3 12 11.0
M8x1.25 - 1.25 06058L16-I1.25ISO 6 5.8 57 16.25 3 13 6.8
- M10x1.25 1.25 08077L20-I1.25ISO 6 5.9 57 16.25 3 13 8.8
M10x1.5 M12-M48x1.5 1.50 08077L21-I1.50ISO 8 7.7 63 21.0 3 14 8.5
- M12x1.5 1.50 10094L24-I1.50ISO 8 7.9 63 21.0 3 14 10.5
- M14x1.5 1.50 12112L28-I1.50ISO 10 9.4 73 24.0 4 16 12.5
- M16x1.5 1.50 12119L33-I1.50ISO 12 11.2 83 28.5 4 19 14.5
M12x1.75 - 1.75 10087L24-I1.75ISO 10 8.7 73 24.5 4 14 10.2
M14x2.0 M17-M80x2.0 2.00 10099L28-I2.00ISO 10 9.9 73 28.0 4 14 12.0
M16x2.0 M17-M80x2.0 2.00 12119L32-I2.00ISO 10 9.9 73 28.0 4 14 14.0
M18-M22x2.5 - 2.50 16139L40-I2.50ISO 16 13.9 92 40.0 5 16 15.5
M24x3.0 - 3.00 16159L42-I3.00ISO 16 15.9 92 42.0 4 14 21.0
* Bore Diameter applies to smallest thread Dia ●: Stock item
360 KORLOY
American UN (UNC,UNF,UNEF) Helical flutes
D L
Internal
ê
External / Internal
Tolerance class : 2A/2B Ød
External
External (ℓ 2 × Thread Diameter)

Designation PC9070M
UNC UNF (tpi) Ød D L ℓ z zt
No.8-32 - 32 STMH 04039L09-E32UNC 4 3.9 45 8.7 3 11
- No.12-28 28 04039L12-E28UNF 4 3.9 45 11.8 3 13
No.12-24 - 24 04039L12-E24UNC 4 3.9 45 11.6 3 11
1/4˝x20 - 20 04039L13-E20UNC 4 3.9 45 12.7 3 10
5/16˝x18 - 18 06059L17-E18UNC 6 5.9 57 16.9 3 12
3/8˝x16 - 16 08079L19-E16UNC 8 7.9 63 19.1 3 12
9/16˝x12 - 12 12119L30-E12UNC 12 11.9 83 29.6 4 14
Internal (ℓ 2 × Thread Diameter)

Designation PC9070M
UNC UNF UNEF (tpi) Ød D L ℓ z zt mm
- No.8-36 36 STMH 04030L09-I36UNF 4 3.0 45 8.5 3 12 3.5
- No.10-32 No.12-3/8˝x32 32 04033L11-I32UNF 4 3.3 45 11.1 3 14 4.0
- No.12-28,1/4˝x28 7/16˝,1/2˝x28 28 04038L12-I28UNF 4 3.8 45 11.8 3 13 4.6
- 1/4˝x28 7/16˝,1/2˝x28 28 06046L13-I28UNF 6 4.6 57 12.7 3 14 5.5
- - 7/16˝,1/2˝x28 28 10092L23-I28UNEF 10 9.2 73 22.7 4 25 10.2
No.10-24 5/16˝,3/8˝x24 9/16˝-11/16˝x24 24 04029L11-I24UNC 4 2.9 45 10.6 3 10 3.8
No.12-24 5/16˝,3/8˝x24 9/16˝-11/16˝x24 24 04035L12-I24UNC 4 3.5 45 11.6 3 11 4.5
5/16˝, 3/8˝x24 9/16˝-11/16˝x24 24 06057L16-I24UNF 6 5.7 57 15.9 3 15 6.8
- 3/8˝x24 9/16˝-11/16˝x24 24 08074L19-I24UNF 8 7.4 63 19.1 3 18 8.5
- - 9/16˝-11/16˝x24 24 12119L29-I24UNEF 12 11.9 83 28.6 4 27 13.2
1/4˝x20 7/16˝,1/2˝x20 3/4˝-1˝x20 20 04039L13-I20UNC 4 3.9 45 12.7 3 10 5.2
7/16˝, 1/2˝x20 3/4˝-1˝x20 20 10085L23-I20UNF 10 8.5 73 22.9 4 18 9.8
- 1/2˝x20 3/4˝-1˝x20 20 10099L26-I20UNF 10 9.9 73 25.4 4 20 11.5
- - 3/4˝-1˝x20 20 16159L38-I20UNEF 16 15.9 92 38.1 5 30 17.8
5/16˝x18 9/16˝,5/8˝x18 11/16˝-1 11/16˝x18 18 06052L17-I18UNC 6 5.2 57 16.9 3 12 6.5
9/16˝, 5/8˝x18 11/16˝-1 11/16˝x18 18 12113L30-I18UNF 12 11.3 83 29.6 4 21 12.8
5/8˝x18 11/16˝-1 11/16˝x18 18 12119L33-I18UNF 12 11.9 83 32.5 4 23 14.5
3/8˝x16 3/4˝x16 - 16 08067L19-I16UNC 8 6.7 63 19.1 3 12 8.0
- 3/4˝x16 - 16 16159L38-I16UNF 16 15.9 92 38.1 4 24 17.5
7/16˝x14 7/8˝x14 - 14 08076L24-I14UNC 8 7.6 63 23.6 4 13 9.3
- 7/8˝x14 - 14 20187L44-I14UNF 20 18.7 104 43.5 4 24 20.5
1/2˝x13 - - 13 10089L26-I13UNC 10 8.9 73 25.4 4 13 10.8
9/16˝x12 1˝-1 1/2˝x12 - 12 12103L30-I12UNC 12 10.3 83 29.6 4 14 12.3
- 1˝-1 1/2˝x12 - 12 20199L51-I12UNF 20 19.9 104 50.8 5 24 23.5
5/8˝x11 - - 11 12110L32-I11UNC 12 11.0 83 32.3 4 14 13.5
3/4˝x10 - - 10 16135L38-I10UNC 16 13.5 92 38.1 5 15 16.5
7/8˝x9 - - 9 16152L45-I9UNC 16 15.2 92 45.2 4 16 19.5
1˝x8 - - 8 20170L51-I8UNC 20 17.0 104 50.8 4 16 22.0
KORLOY 361
Thread
Thread Mill
BSP Helical flutes
D L
Internal
ê
External / Internal
Defined by : B.S.2779 : 1956
Tolerance class : Medium class Ød
External

Designation PC9070M
Standard (tpi) Ød D L ℓ z zt mm
1⁄16˝x28,1⁄8˝x28 28 STMH 06058L16-EI28BSP 6 5.8 57 16.3 3 18 6.7
1⁄8˝x28 28 08077L20-EI28BSP 8 7.7 63 20.0 3 22 8.7
1⁄4˝x19, 3⁄8˝x19 19 10099L27-EI19BSP 10 9.9 73 26.7 4 20 11.8
3⁄8˝x19 19 16134L33-EI19BSP 16 13.4 92 33.4 4 25 15.2
1⁄2˝, 3⁄4˝x14 14 16157L44-EI14BSP 16 15.7 92 43.5 5 24 19.0
1˝, 1 1⁄2˝, 2˝, 2 1⁄2˝x11 11 20199L42-EI11BSP 20 19.9 104 41.6 5 18 30.7
BSPT Helical flutes
D L
Internal
ê
External / Internal
Defined by : B.S.21 : 1985
Tolerance class : Standard BSPT Ød
External

Designation PC9070M
1⁄16˝x28 28 STMH 06058L16-EI28BSPT 6 5.8 57 16.3 3 18 6.7
1⁄8˝x28 28 08077L20-EI28BSPT 8 7.7 63 20.0 3 22 8.7
1⁄4˝x19 19 10099L27-EI19BSPT 10 9.9 73 26.7 4 20 11.8
3⁄8˝x19 19 16134L33-EI19BSPT 16 13.4 92 33.4 4 25 15.2
1⁄2˝, 3⁄4˝x14 14 16157L44-EI14BSPT 16 15.7 92 43.5 5 24 19.0
1˝, 1 1⁄2˝, 2˝, 2 1⁄2˝x11 11 20199L42-EI11BSPT 20 19.9 104 41.6 5 18 30.7
362 KORLOY
NPT Helical flutes
D L
Internal
ê
External / Internal
Defined by : USAS B2.1 : 1968
Tolerance class : Standard NPT Ød
External

Designation PC9070M
1⁄16˝x27 27.0 STMH 06053L09-EI27NPT 6 5.3 57 9.4 3 10 6.3
1⁄8˝x27 27.0 08075L09-EI27NPT 8 7.5 63 9.4 4 10 8.5
1⁄4˝x18 18.0 10094L14-EI18NPT 10 9.4 73 14.1 4 10 11.1
3⁄8˝x18 18.0 12119L14-EI18NPT 12 11.9 83 14.1 4 10 14.5
1⁄2˝, 3⁄4˝x14 14.0 16155L25-EI14NPT 16 15.5 92 25.4 5 14 17.7, 23.0
1˝-2˝x11.5 11.5 20199L33-EI11.5NPT 20 19.9 104 33.1 5 15 29.0-56.0
2 1⁄2˝, 3˝x8 8.0 20199L38-EI8NPT 20 19.9 104 38.1 4 12 66.0
NPTF Helical flutes
D L
Internal
ê
External / Internal
Tolerance class : Standard NPTF Ød
External

Designation PC9070M
1⁄16˝x27 27.0 STMH 06053L09-EI27NPTF 6 5.3 57 9.4 3 10 6.3
1⁄8˝x27 27.0 08075L09-EI27NPTF 8 7.5 63 9.4 4 10 8.4
1⁄4˝x18 18.0 10094L14-EI18NPTF 10 9.4 73 14.1 4 10 11.1
3⁄8˝x18 18.0 12119L14-EI18NPTF 12 11.9 83 14.1 4 10 14.7
1⁄2˝, 3⁄4˝x14 14.0 16155L25-EI14NPTF 16 15.5 92 25.4 5 14 17.9, 23.4
1˝-2˝x11.5 11.5 20199L33-EI11.5NPTF 20 19.9 104 33.1 5 15 29.4-56.2
2 1⁄2˝, 3˝x8 8.0 20199L38-EI8NPTF 20 19.9 104 38.1 4 12 67.0
KORLOY 363
Thread
Thread Mill
ISO Metric Straight flutes
D L
Internal ê
External / Internal
Tolerance class : 6g/6H Ød
External
External
Designation PC9060M
Standard (mm) Ød D L ℓ z zt mm
M3 0.50 STMS 06059-E0.50ISO 6 5.9 57 15 3 30 0.31
M4.5 0.75 08079-E0.75ISO 8 7.9 63 19.5 3 26 0.46
M4.5 0.75 08079-E0.75ISO-TM5 8 7.9 63 19.5 5 26 0.46
M6 1.00 10099-E1.00ISO 10 9.9 72 24 5 24 0.61
M10 1.50 12119-E1.50ISO 12 11.9 83 30 5 20 0.92
M14 2.00 12119-E2.00ISO 12 11.9 83 30 5 15 1.23
M24 3.00 16159-E3.00ISO 16 15.9 92 36 5 12 1.84
M36 4.00 16159-E4.00ISO 16 15.9 92 40 5 10 2.45
M64 6.00 20199-E6.00ISO 20 19.9 104 36 5 6 3.68
Internal
Designation PC9060M
M4.5 0.75 STMS 04030-I0.75ISO 4 3 42 6.75 3 9 0.43
M8 0.75 06059-I0.75ISO 6 5.9 57 15.0 3 20 0.43
M5 0.80 04036-I0.80ISO 4 3.6 42 8.0 3 10 0.46
M6 1.00 06040-I1.00ISO 6 4 57 9.0 3 9 0.58
M12 1.00 08079-I1.00ISO 8 7.9 63 20.0 3, 5 20 0.58
M12 1.00 08079-I1.00ISO-TM5 8 7.9 63 20.0 3, 5 20 0.58
M8 1.25 06050-I1.25ISO 6 5 57 12.5 3 10 0.72
M10 1.50 06059-I1.50ISO 6 5.9 57 15.0 3 10 0.87
M14 1.50 10099-I1.50ISO 10 9.9 72 24.0 5 16 0.87
M18 1.50 12119-I1.50ISO 12 11.9 83 30.0 5 20 0.87
M12 1.75 08079-I1.75ISO 8 7.9 63 19.25 3, 5 11 1.01
M12 1.75 08079-I1.75ISO-TM5 8 7.9 63 19.25 3, 5 11 1.01
M16 2.00 10099-I2.00ISO 10 9.9 72 24.0 5 12 1.15
M18 2.00 12119-I2.00ISO 12 11.9 83 30.0 5 15 1.15
M20 2.50 12119-I2.50ISO 12 11.9 83 30.0 5 12 1.44
M24 3.00 16159-I3.00ISO 16 15.9 92 36.0 5 12 1.73
M30 3.50 16159-I3.50ISO 16 15.9 92 38.5 5 11 2.02
M36 4.00 16159-I4.00ISO 16 15.9 92 40.0 5 10 2.31
M48 5.00 20199-I5.00ISO 20 19.9 104 40.0 5 8 2.89
M64 6.00 20199-I6.00ISO 20 19.9 104 36.0 5 6 3.46
364 KORLOY
BSP Straight flutes
D L
Internal ê
External / Internal
Tolerance class : Medium class Ød
External

Designation PC9060M
1/16˝ 28 STMS 06059-EI28BSP 6 5.9 57 14.51 3 16 0.58
1/4˝ 19 08079-EI19BSP 8 7.9 63 18.72 3 14 0.86
1/4˝ 19 08079-EI19BSP-TM5 8 7.9 63 18.72 5 14 0.86
1/2˝ 14 12119-EI14BSP 12 11.9 83 29.03 5 16 1.16
1˝ 11 16159-EI11BSP 16 15.9 92 34.64 5 15 1.48
BSPT Straight flutes
D L
Internal ê
External / Internal
Defined by : B.S.21 : 1985
Tolerance class : Standard BSPT Ød
External

Designation PC9060M
1/16˝ 28 STMS 06059-EI28BSPT 6 5.9 57 9.98 3 11 0.58
1/4˝ 19 08079-EI19BSPT 8 7.9 63 14.71 3 11 0.86
1/4˝ 19 08079-EI19BSPT-TM5 8 7.9 63 14.71 5 11 0.86
1/2˝ 14 12119-EI14BSPT 12 11.9 83 19.96 5 11 1.16
1˝ 11 16159-EI11BSPT 16 15.9 92 39.25 5 17 1.48
KORLOY 365
Thread
Thread Mill
NPT Straight flutes
D L
Internal ê
External / Internal
Defined by : USAS B2.1:1968
Tolerance class : Standard NPT Ød
External

Designation PC9060M
1/16˝ 27.0 STMS 06059-EI27NPT 6 5.9 57 9.41 3.0 10 0.66
1/4˝ 18.0 08079-EI18NPT 8 7.9 63 14.11 3, 5 10 1.01
1/4˝ 18.0 08079-EI18NPT-TM5 8 7.9 63 14.11 3, 5 10 1.01
1/2˝ 14.0 12119-EI14NPT 12 11.9 83 19.96 5.0 11 1.33
1˝ 11.5 16159-EI11.5NPT 16 15.9 92 26.50 5.0 12 1.64
2 1/2˝ 8.0 16159-EI8NPT 16 15.9 92 38.10 5.0 12 2.42
NPTF Straight flutes
D L
Internal ê
External / Internal
Tolerance class : Standard NPTF Ød
External

Designation PC9060M
1/16˝ 27.0 STMS 06059-EI27NPTF 6 5.9 57 9.41 3 10 0.64
1/4˝ 18.0 08079-EI18NPTF 8 7.9 63 14.11 3, 5 10 1.00
1/2˝ 14.0 12119-EI14NPTF 12 11.9 83 19.96 5 11 1.35
1˝ 11.5 16159-EI11.5NPTF 16 15.9 92 26.50 5 12 1.63
2 1/2˝ 8.0 16159-EI8NPTF 16 15.9 92 38.10 5 12 2.38
366 KORLOY
ISO Metric Deep threading / Long-type tool
D L
Internal ê
Internal
Tolerance class : 6H Ød
External

Designation PC9070M
M6x1 1.00 STMD1T 08041-I1.00ISO 8 4.1 63 19 3 1 5.0
M8x1.25 1.25 10058-I1.25ISO 10 5.8 73 26 3 1 6.8
M10x1.5 1.50 10077-I1.50ISO 10 7.7 73 32 3 1 8.5
M12x1.5 1.50 12094-I1.50ISO 12 9.4 83 38 4 1 10.5
M12x1.75 1.75 12087-I1.75ISO 12 8.7 83 38 4 1 10.2
M14x2 2.00 16102-I2.00ISO 16 10.2 92 44 4 1 12.0
M16x2 2.00 16122-I2.00ISO 16 12.2 100 50 4 1 14.0
M18x2.5 2.50 16129-I2.50ISO 16 12.9 108 57 5 1 15.5
M20x2.5 2.50 16148-I2.50ISO 16 14.8 114 63 5 1 17.5
TP60 Deep threading / Long-type tool
D L
Internal ê
Internal
Ød
External
Thread Min. Thread Pitch Dimensions (mm) No.of flute Tooth

Designation PC9070M
M Coarse M Fine UN, UNF, UNEF (mm) (tpi) Ød D L ℓ z zt
No.10-56UNS, No.10-48UNS, 0.5 32
M5x0.5,
M5x0.8
M5X0.75
No.10-40UNS, No.10-36UNS,
~0.8 ~56
STMD1T 04390L160-ITA60 4 3.90 45 16 4 1
No.10-32UNF
No.12-56UNS, No.12-48UNS, 0.5 24
M6x0.5,
M6x1.0
M6X0.75
1 ⁄ 4 -40UNS, 1 ⁄ 4 -36UNS, 1 ⁄ 4 -32UNEF, 06485L200-ITB60 6 4.85 51 20 5 1
1 ⁄ 4 -28UNF, 1 ⁄ 4 -27UNS, 1 ⁄ 4 -24UNS ~1.0 ~56
5 ⁄ 16 -48UNS, 5 ⁄ 16 -40UNS,
M7x0.5, 0.5 20
5 ⁄ 16 -36UNS, 5 ⁄ 16 -32UNEF,
M8x1.25 M7x0.75,
5 ⁄ 16 -28UN, 5 ⁄ 16 -27UNS, 06590L250-ITF60 6 5.90 64 25 5 1
M7.5x1.0 ~1.25 ~48
5 ⁄ 16 -24UNS, 5 ⁄ 16 -20UN
M10.5x0.5, 0.5 24
7 ⁄ 16 -32UN, 7 ⁄ 16 -28UNEF,
M11x0.75,
7 ⁄ 16 -27UNS, 7 ⁄ 16 -24UNS 10990L350-ITB60 10 9.90 73 35 6 1
M11x1.0 ~1.0 ~56
M10x1.0, 3 ⁄ 8 -24UNF, 3 ⁄ 8 -20UN, 1.0 16

M10x1.5
M10X1.25 7 ⁄ 16 -18UNS, 7 ⁄ 16 -16UN 08790L320-ITC60 8 7.90 63 32 6 1
~1.50 ~24
M12x1.0, 1.0 14
1 ⁄ 2 -24UNS, 1 ⁄ 2 -20UNS,
M12x1.75 M12X1.25,
1 ⁄ 2 -18UNS, 1 ⁄ 2 -16UNS, 1 ⁄ 2 -14UNS ~1.75 ~24 10990L380-ITD60 10 9.90 73 38 6 1
M12x1.5
M13.5x1.0, 1.0 14
- M14x1.25, 9 ⁄ 16 -24UNEF 12119L450-ITD60 12 11.90 83 45 6 1
M14x1.5 ~1.75 ~24
KORLOY 367
Thread
Thread Mill
ISO Metric Deep threading
Internal
ê
Internal
Ød
External

Designation PC9070M
M1.6x0.35 - 0.35 STMD3T 03012L034-I0.35ISO 3 1.20 30 3.4 3 3 1.25
M2x0.4 - 0.40 06015L042-I0.40ISO 6 1.55 57 4.2 3 3 1.60
M2.2x0.45 - 0.45 06016L046-I0.45ISO 6 1.65 57 4.6 3 3 1.75
M2.5x0.45 - 0.45 06019L052-I0.45ISO 6 1.95 57 5.2 3 3 2.05
M3x0.5 M3.5-M16x0.5 0.50 06024L062-I0.50ISO 6 2.40 57 6.2 3 3 2.50
M3.5x0.6 - 0.60 06027L073-I0.60ISO 6 2.75 57 7.3 3 3 2.90
M4x0.7 - 0.70 06031L083-I0.70ISO 6 3.15 57 8.3 3 3 3.30
M5x0.8 - 0.80 06040L104-I0.80ISO 6 4.05 57 10.4 3 3 4.20
M6x1.0 M8-M40x1.0 1.00 06048L125-I1.00ISO 6 4.80 57 12.5 3 3 5.00
M8x1.25 - 1.25 08065L166-I1.25ISO 8 6.50 63 16.6 3 3 6.80
M10x1.5 M12-M48x1.50 1.50 10082L208-I1.50ISO 10 8.20 73 20.8 3 3 8.50
M12x1.75 - 1.75 10099L250-I1.75ISO 10 9.90 73 25.0 3 3 10.30
M16x2.0 - 2.00 12119L330-I2.00ISO 12 11.90 83 33.0 3 3 14.00
M20x2.5 - 2.50 16159L413-I2.50ISO 16 15.90 92 41.3 3 3 17.50

Designation PC9070M
M1.6X0.35 - 0.35 STMD3T 03012L050-I0.35ISO 3 1.20 30 5.0 3 3 1.25
M2x0.4 - 0.40 03015L062-I0.40IS0 3 1.55 30 6.2 3 3 1.60
M2X0.4 - 0.40 06015L062-I0.40ISO 6 1.55 57 6.2 3 3 1.60
M2.5x0.45 - 0.45 03019L077-I0.45ISO 3 1.95 30 7.7 3 3 2.05
M2.5x0.45 - 0.45 06019L077-I0.45ISO 6 1.95 57 7.7 3 3 2.05
M3X0.5 M3.5-M16x0.5 0.50 03024L092-I0.50ISO 3 2.40 30 9.2 3 3 2.50
M3x0.5 M3.5-M16x0.5 0.50 06024L092-I0.50ISO 6 2.40 57 9.2 3 3 2.50
M4x0.7 - 0.70 06031L123-I0.70ISO 6 3.15 57 12.3 3 3 3.30
M5x0.8 - 0.80 06040L154-I0.80ISO 6 4.05 57 15.4 3 3 4.20
M6x1.0 M8-M40x1.0 1.00 06048L185-I1.00ISO 6 4.80 57 18.5 3 3 5.00
M8x1.25 - 1.25 08065L246-I1.25ISO 8 6.50 63 24.6 3 3 6.80
368 KORLOY
American UN (UNC,UNF) Deep threading
Internal
ê
External / Internal
Ød
External

Designation PC9070M
UNC UNF (tpi) Ød D L ℓ z zt mm
- No.1-72 72 STMD3T 06014L039-I72UN 6 1.45 57 3.9 3 3 1.6
No.1-64 No.2-64 64 06014L042-I64UN 6 1.40 57 4.2 3 3 1.5
No.2-56 No.3-56 56 06016L050-I56UN 6 1.65 57 5.0 3 3 1.8
No.3-48 No.4-48 48 06019L060-I48UN 6 1.90 57 6.0 3 3 2.1
No.4,No.5-40 No.6-40 40 06021L060-I40UN 6 2.10 57 6.0 3 3 2.3
No.5-40 No.6-40 40 06024L072-I40UN 6 2.45 57 7.2 3 3 2.6
- No.8-36 36 06033L087-I36UN 6 3.30 57 8.7 3 3 3.5
No.6,No.8-32 No.10-32 32 06025L074-I32UN 6 2.55 57 7.4 3 3 2.8
No.8-32 No.10-32 32 06032L100-I32UN 6 3.20 57 10.0 3 3 3.5
- No.10-32 32 06038L103-I32UN 6 3.80 57 10.3 3 3 4.0
- 1/4˝x28 28 06052L132-I28UN 6 5.25 57 13.2 3 3 5.5
No.10-24 5/16˝x24 24 06035L102-I24UN 6 3.58 57 10.2 3 3 3.9
- 5/16˝x24 24 08066L165-I24UN 8 6.68 63 16.5 3 3 6.9
1/4˝x20 7/16˝x20 20 06048L134-I20UN 6 4.88 57 13.4 3 3 5.2
- 7/16˝x20 20 10095L230-I20UN 10 9.55 73 23.0 3 3 9.9
5/16˝x18 - 18 08061L169-I18UN 8 6.15 63 16.9 3 3 6.6
3/8˝x16 - 16 08067L191-I16UN 8 6.70 63 19.1 3 3 8.0
7/16˝x14 - 14 10090L233-I14UN 10 9.00 73 23.3 3 3 9.4

Designation PC9070M
M Coarse M Fine (tpi) Ød D L ℓ z zt mm
- No.1-72 72 STMD3T 03014L057-I72UN 3 1.45 30 5.75 3 3 1.6
- No.1-72 72 06014L057-I72UN 6 1.45 57 5.75 3 3 1.6
No.2-56 No.3-56 56 03016L070-I56UN 3 1.65 30 7.00 3 3 1.8
No.4, No.5-40 No.6-40 40 03021L090-I40UN 3 2.10 30 9.00 3 3 2.3
No.4, No.5-40 No.6-40 40 06021L090-I40UN 6 2.10 57 9.00 3 3 2.3
No.5-40 No.6-40 40 06024L100-I40UN 6 2.45 57 10.00 3 3 2.6
No.6, No.8-32 No.10-32 32 03025L110-I32UN 3 2.55 30 11.00 3 3 2.8
No.6, No.8-32 No.10-32 32 06025L110-I32UN 6 2.55 57 11.00 3 3 2.8
No.8-32 No.10-32 32 06032L130-I32UN 6 3.20 57 13.00 3 3 3.4
- No.10-32 32 06038L150-I32UN 6 3.80 57 15.10 3 3 4.0
- 1/4˝x28 28 06052L196-I28UN 6 5.25 57 19.60 3 3 5.5
- 5/16˝x24 24 08066L245-I24UN 8 6.68 63 24.50 3 3 6.9
1/4˝x20 7/16˝x20 20 06048L198-I20UN 6 4.88 57 19.80 3 3 5.1
5/16˝x18 - 18 08061L239-I18UN 8 6.15 63 24.00 3 3 6.6
KORLOY 369
Thread
Thread Mill
UNJ Deep threading
Internal
5/16P ê
Internal
Defined by : MIL-S-8879C
Ød
R max 0.18042P
R min 0.15011P External ê = Pitch X 3

Designation PC9070M
UNJC UNJF (tpi) Ød D L ℓ z zt mm
0.138˝(#6) 0.190˝(#10) 32 STMD3T 06027L110-I32UNJ 6 2.7 57 11.0 3 3 2.80
- 0.250˝(1/4˝) 28 06054L195-I28UNJ 6 5.4 57 19.5 3 3 5.60
0.190˝(#10) - 24 06037L149-I24UNJ 6 3.7 57 14.9 3 3 4.00
- 0.3125˝(5/16˝) 24 08067L241-I24UNJ 8 6.7 63 24.1 3 3 7.00
0.250˝(1/4˝) - 20 06050L195-I20UNJ 6 5 57 19.5 3 3 5.30
- 0.4375˝(7/16˝) 20 10096L335-I20UNJ 10 9.6 73 33.5 3 3 10.00
0.3125˝(5/16˝) 0.5625˝(9/16˝) 18 08064L241-I18UNJ 8 6.4 63 24.1 3 3 6.75
0.375˝(3/8˝) 0.750˝(3/4˝) 16 08077L290-I16UNJ 8 7.7 63 29.0 3 3 8.10
0.4375˝(7/16˝) 0.875˝(7/8˝) 14 10092L335-I14UNJ 10 9.2 73 33.5 3 3 9.50
0.500˝(1/2˝) - 13 10099L385-I13UNJ 10 9.9 73 38.5 3 3 11.00
MJ Deep threading
Internal
ê
Internal
Defined by : ISO 5855
Ød
Tolerance class : 4h/6h-4H/5H
External ê = Pitch X 3

Designation PC9070M
MJ3x0.5 0.50 STMD3T 06024L092-I0.5MJ 6 2.40 57 9.2 3 3 2.60
MJ3.5x0.6 0.60 06028L110-I0.6MJ 6 2.85 57 11.0 3 3 3.00
MJ4x0.7 0.70 06031L123-I0.7MJ 6 3.15 57 12.3 3 3 3.40
MJ5x0.8 0.80 06040L154-I0.8MJ 6 4.05 57 15.4 3 3 4.30
MJ6x1.0 1.00 06048L185-I1.0MJ 6 4.80 57 18.5 3 3 5.10
MJ8x1.25 1.25 08065L246-I1.25MJ 8 6.50 63 24.6 3 3 6.90
MJ10x1.5 1.50 10082L308-I1.50MJ 10 8.20 73 30.8 3 3 8.70
MJ12x1.75 1.75 10099L370-I1.75MJ 10 9.90 73 37.0 3 3 10.40
MJ14x2 2.00 12119L425-I2.0MJ 12 11.90 83 42.5 3 3 12.25
370 KORLOY
ISO Metric Deep threading for dental
D L
Internal
ê
Internal
Ød
External

Designation PC9070M
M1.0x0.25 M1.4x0.25 0.25 STMD1T 03007L031-I0.25ISO 3 0.70 31 3.1 3 1 0.75
M1.2x0.25 M1.4x0.25 0.25 03009L038-I0.25ISO 3 0.90 31 3.8 3 1 0.95
M1.4x0.3 - 0.30 03011L044-I0.30ISO 3 1.05 31 4.4 3 1 1.15
M1.6x0.35 - 0.35 03012L050-I0.35ISO 3 1.20 31 5.0 3 1 1.30
M1.8x0.35 M2.0x0.35 0.35 03014L056-I0.35ISO 3 1.40 31 5.6 3 1 1.50
M2.0x0.4 - 0.40 03015L062-I0.40ISO 3 1.50 31 6.2 3 1 1.65
M2.5x0.45 - 0.45 03019L077-I0.45ISO 3 1.95 31 7.7 3 1 2.10
American UNF Deep threading for dental
D L
Internal
ê
Internal
Ød
External

Designation PC9070M
UNF (tpi) Ød D L ℓ z zt mm
0-80 80 STMD1T 03011L046-I80UN 3 1.15 31 4.6 3 1 1.3
1-72 72 03014L065-I72UN 3 1.45 31 6.5 3 1 1.6
KORLOY 371
Thread
Thread Mill
ISO Metric Deep threading for hard materials
D L
Internal
ê
Internal
Tolerance class : 6H Ød
External

Designation PC9070M
M2x0.4 - 0.40 STMD2L 06015L042-I0.40ISO 6 1.55 76 4.60 4 2 1.60
M2.2x0.45 - 0.45 06016L046-I0.45ISO 6 1.65 76 5.05 4 2 1.80
M2.5x0.45 - 0.45 06019L052-I0.45ISO 6 1.95 76 5.65 4 2 2.05
M3x0.5 M3.5-M16x0.5 0.50 06024L062-I0.50ISO 6 2.40 76 6.75 4 2 2.55
M3.5x0.6 - 0.60 06027L073-I0.60ISO 6 2.75 76 7.90 4 2 2.95
M4x0.7 - 0.70 06031L083-I0.70ISO 6 3.15 76 9.05 4 2 3.35
M5x0.8 - 0.80 06040L104-I0.80ISO 6 4.05 76 11.20 4 2 4.30
M6x1.0 M8-M40x1.0 1.00 06048L125-I1.00ISO 6 4.80 76 13.50 5 2 5.10
M8x1.25 - 1.25 08065L166-I1.25ISO 8 6.50 80 17.85 5 2 6.80
M10x1.5 M12-M48x1.50 1.50 08079L208-I1.50ISO 8 7.90 80 22.30 6 2 8.60
M12x1.75 - 1.75 10099L250-I1.75ISO 10 9.90 101 26.75 6 2 10.40

Designation PC9070M
M2x0.4 - 0.40 STMD2L 06015L062-I0.40ISO 6 1.55 76 6.60 4 2 1.60
M2.5x0.45 - 0.45 06019L077-I0.45ISO 6 1.95 76 8.15 4 2 2.05
M3x0.5 M3.5-M16x0.5 0.50 06024L092-I0.50ISO 6 2.40 76 9.75 4 2 2.55
M4x0.7 - 0.70 06031L123-I0.70ISO 6 3.15 76 13.05 4 2 3.35
M5x0.8 - 0.80 06040L154-I0.80ISO 6 4.05 76 16.20 4 2 4.30
M6x1.0 M8-M40x1.0 1.00 06048L185-I1.00ISO 6 4.80 76 19.50 5 2 5.10
M8x1.25 - 1.25 08065L246-I1.25ISO 8 6.50 80 25.85 5 2 6.80
Roughing (Partial profile) Finish (Full profile)
Two cutting teeth: Partial profile for

leading tooth followed by full profile Deep threading for hard materials
for finishing tools are left handed.
The work direction should be from For CNC use M04 code.
the top to the bottom (Climb Milling)
1 pitch
372 KORLOY
American UN (UNC,UNF) Deep threading for hard materials
D L
Internal
ê
Internal
Tolerance class : 2B Ød
External

Designation PC9070M
No.2-56 No.3-56 56 STMD2L 06016L050-I56UN 6 1.65 76 5.45 4 2 1.80
No.3-48 No.4-48 48 06019L060-I48UN 6 1.90 76 6.53 4 2 2.10
No.4-40, No.5-40 No.6-40 40 06021L060-I40UN 6 2.10 76 6.64 4 2 2.35
No.5-40 No.6-40 40 06024L072-I40UN 6 2.45 76 7.84 4 2 2.65
- No.8-36 36 06033L087-I36UN 6 3.30 76 9.41 4 2 3.55
No.6-32, No.8-32 No.10-32 32 06025L074-I32UN 6 2.55 76 8.20 4 2 2.85
No.8-32 No.10-32 32 06032L100-I32UN 6 3.20 76 10.79 4 2 3.50
- No.10-32 32 06037L100-I32UN 6 3.70 76 10.80 4 2 4.17
- 1/4˝x28 28 06052L132-I28UN 6 5.25 76 14.11 5 2 5.55
No.10-24 5/16˝x24 24 06035L102-I24UN 6 3.58 76 11.26 4 2 3.90
- 5/16˝x24 24 08066L165-I24UN 8 6.68 80 17.56 5 2 7.00
1/4˝-20 7/16˝x20 20 06048L134-I20UN 6 4.88 76 14.67 5 2 5.20
- 7/16˝x20 20 10095L230-I20UN 10 9.55 101 24.27 6 2 9.90
5/16˝x18 - 18 08061L160-I18UN 8 6.15 80 18.17 4 2 6.50
3/8˝x16 - 16 08076L197-I16UN 8 7.65 80 21.29 5 2 8.00
7/16˝x14 - 14 10090L233-I14UN 10 9.00 101 25.11 6 2 9.50
1/2˝x13 - 13 10099L256-I13UN 10 9.90 101 27.55 6 2 10.90

Designation PC9070M
No.4-40, No.5-40 No.6-40 40 STMD2L 06021L090-I40UN 6 2.10 76 9.64 4 2 2.35
No.5-40 No.6-40 40 06024L100-I40UN 6 2.45 76 10.64 4 2 2.65
No.6-32, No.8-32 No.10-32 32 06025L110-I32UN 6 2.55 76 11.79 4 2 2.85
No.8-32 No.10-32 32 06032L130-I32UN 6 3.20 76 13.79 4 2 3.50
- 1/4˝x28 28 06052L196-I28UN 6 5.25 76 20.51 5 2 5.55
- 5/16˝x24 24 08066L245-I24UN 8 6.68 80 25.56 5 2 7.00
1/4˝x20 7/16˝x20 20 06048L198-I20UN 6 4.88 76 21.07 5 2 5.20
5/16˝x18 - 18 08061L240-I18UN 8 6.15 80 26.17 4 2 6.50
7/16˝x14 - 14 10090L335-I14UN 10 9.00 101 35.31 6 2 9.50
KORLOY 373
High performance carbide tap and HSS tap
TAP
t Suitable for Alloy Steels, Carbon steels, Brass, Aluminum alloy steels
t Extend customer choice with variety of size and type
Features Applications
t Improvement of wear resistance and chipping
resistance by applied to high toughness material
t High processability and Minimized chip deposition by Cast Iron
applied to TiN,TiCN coating
Carbon
t Response to a wide range of processing conditions by Aluminum
Steel
adopting the stepwise accuracy method of WH or GH
HSSE Tool
TAP Steels
Stainless
Alloy Steel
Steels
Copper
Code system
V R 0 M 06 100 40 S
Raw material Surface Size Pitch Oil Groove
V : HSSE
treatment M3 ~ M24 0.5 ~ 3.0 S : 1 Groove
O : NON M : 4 Groove
T : TiN
Appearance C : TiCN Thread Chamfer length
H : HOMO
S (JIS) : Straight M : Meter Thread 1.5
G (DIN) : Straight PT : Pipe Tapered 2.0
P (JIS) : Spiral NPT : National Pipe Tapered 2.5
Q (DIN) : Spiral PS : Pipe Straight 4.0
N (JIS) : Point PF : Pipe Fastening 5.0
D (DIN) : Point
R (JIS) : Roll
F (JIS) : Spiral Roll
M (DIN) : Roll
374 KORLOY
HSS TAP
Surface treatment
EDP. NO Appearance Type Size range Page
Coating Uncoated
VPOM Spiral flute tap - ○ M3 ~ M24 376
VPTM Spiral flute tap TiN - M3 ~ M24 377
VPCM Spiral flute tap TiCN - M3 ~ M24 378
VPHM Spiral flute tap HOMO - M3 ~ M24 379
VNOM Spiral point tap - ○ M3 ~ M24 380
VNTM Flute point tap TiN - M3 ~ M24 381
VNCM Flute point tap TiCN - M3 ~ M24 382
VNHM Flute point tap HOMO - M3 ~ M24 383
VSOM Straight flute tap - ○ M3 ~ M24 384

JIS
VSTM Straight flute tap TiN - M3 ~ M24 385
VSCM Straight flute tap TiCN - M3 ~ M24 386
VSHM Straight flute tap HOMO - M3 ~ M24 387
VROM Roll tap - ○ M3 ~ M12 388
VRTM Roll tap TiN - M3 ~ M12 389
VRCM Roll tap TiCN - M3 ~ M12 390
VFOM Spiral roll tap - ○ M3 ~ M6 391
VFTM Spiral roll tap TiN - M3 ~ M6 392
VFCM Spiral roll tap TiCN - M3 ~ M6 393
VQOM Spiral flute tap - ○ M3 ~ M24 394
VQTM Spiral flute tap TiN - M3 ~ M24 395
VQCM Spiral flute tap TiCN - M3 ~ M24 396
VQHM Spiral flute tap HOMO - M3 ~ M24 397
VDOM Spiral Point Tap - ○ M3 ~ M24 398
VDTM Spiral Point Tap TiN - M3 ~ M24 399
VDCM Flute point tap TiCN - M3 ~ M24 400
VDHM DIN Flute point tap HOMO - M3 ~ M24 401
VGOM Straight flute tap - ○ M3 ~ M24 402
VGTM Straight flute tap TiN - M3 ~ M24 403
VGCM Straight flute tap TiCN - M3 ~ M24 404
VGHM Straight flute tap HOMO - M3 ~ M24 405
VMOM Roll Tap - ○ M3 ~ M12 406
VMTM Roll Tap TiN - M3 ~ M12 407
VMCM Roll Tap TiCN - M3 ~ M12 408
KORLOY 375
Thread
TAP
VPOM
VPO JIS spiral flute taps
35 Un-
HSSE coated
HELIX

Designation
Thread size Limits L ℓ d K Kl Z
2.5P
VPOM0305025 M3 × 0.5 WH2 46 11 4 3.2 6 3
VPOM0407025 M4 × 0.7 WH2 52 13 5 4 7 3
VPOM04507525 M4.5 × 0.75 WH2 55 13 5 4 7 3
VPOM0508025 M5 × 0.8 WH2 60 16 5.5 4.5 7 3
VPOM0610025 M6 × 1.0 WH2 62 19 6 4.5 7 3
VPOM0812525 M8 × 1.25 WH2 70 22 6.2 5 8 3
VPOM1012525 M10 × 1.25 WH2 75 24 7 5.5 8 3
VPOM1015025 M10 × 1.5 WH2 75 24 7 5.5 8 3
VPOM1210025 M12 × 1.0 WH2 82 29 8.5 6.5 9 3
VPOM1212525 M12 × 1.25 WH2 82 29 8.5 6.5 9 3
VPOM1215025 M12 × 1.5 WH2 82 29 8.5 6.5 9 3
VPOM1217525 M12 × 1.75 WH2 82 29 8.5 6.5 9 3
VPOM1415025 M14 × 1.5 WH2 88 30 10.5 8 11 3
VPOM1420025 M14 × 2.0 WH2 88 30 10.5 8 11 3
VPOM1615025 M16 × 1.5 WH2 95 32 12.5 10 13 3
VPOM1620025 M16 × 2.0 WH2 95 32 12.5 10 13 3
VPOM1815025 M18 × 1.5 WH2 100 37 14 11 14 4
VPOM1825025 M18 × 2.5 WH3 100 37 14 11 14 4
VPOM2015025 M20 × 1.5 WH3 105 37 15 12 15 4
VPOM2025025 M20 × 2.5 WH3 105 37 15 12 15 4
VPOM2215025 M22 × 1.5 WH3 115 38 17 13 16 4
VPOM2225025 M22 × 2.5 WH3 115 38 17 13 16 4
VPOM2415025 M24 × 1.5 WH3 120 45 19 15 18 4
VPOM2420025 M24 × 2.0 WH3 120 45 19 15 18 4
VPOM2430025 M24 × 3.0 WH4 120 45 19 15 18 4
Low Medium High High Aluminum Aluminum Magnesium Thermoset-
Alloy Stainless Tool Cast Casting Zinc alloy Titanium Nickel Thermo-
carbon carbon carbon Hardened steels Cast iron strength Copper Brass Bronze rolled alloy cast- alloy cast- ting
steel steels steels steels brass castings alloys alloy plastic
steels steels steels steels material ings ings plastic
C C0.25% C 25~45 45~55 50~60
SCM STS SKD SC FC FCD Cu Bs BsC PB AL AC, ADC MC ZDC
~0.25% ~0.45% 0.45%~ HRC HRC HRC
◎ ◎ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
376 KORLOY
VPTM
VPT JIS spiral flute taps
35
HSSE
HELIX

Designation
2.5P
VPTM0305025 M3 × 0.5 WH2 46 11 4 3.2 6 3
VPTM0407025 M4 × 0.7 WH2 52 13 5 4 7 3
VPTM04507525 M4.5 × 0.75 WH2 55 13 5 4 7 3
VPTM0508025 M5 × 0.8 WH2 60 16 5.5 4.5 7 3
VPTM0610025 M6 × 1.0 WH2 62 19 6 4.5 7 3
VPTM0812525 M8 × 1.25 WH2 70 22 6.2 5 8 3
VPTM1012525 M10 × 1.25 WH2 75 24 7 5.5 8 3
VPTM1015025 M10 × 1.5 WH2 75 24 7 5.5 8 3
VPTM1210025 M12 × 1.0 WH2 82 29 8.5 6.5 9 3
VPTM1212525 M12 × 1.25 WH2 82 29 8.5 6.5 9 3
VPTM1215025 M12 × 1.5 WH2 82 29 8.5 6.5 9 3
VPTM1217525 M12 × 1.75 WH2 82 29 8.5 6.5 9 3
VPTM1415025 M14 × 1.5 WH2 88 30 10.5 8 11 3
VPTM1420025 M14 × 2.0 WH2 88 30 10.5 8 11 3
VPTM1615025 M16 × 1.5 WH2 95 32 12.5 10 13 3
VPTM1620025 M16 × 2.0 WH2 95 32 12.5 10 13 3
VPTM1815025 M18 × 1.5 WH2 100 37 14 11 14 4
VPTM1825025 M18 × 2.5 WH3 100 37 14 11 14 4
VPTM2015025 M20 × 1.5 WH3 105 37 15 12 15 4
VPTM2025025 M20 × 2.5 WH3 105 37 15 12 15 4
VPTM2215025 M22 × 1.5 WH3 115 38 17 13 16 4
VPTM2225025 M22 × 2.5 WH3 115 38 17 13 16 4
VPTM2415025 M24 × 1.5 WH3 120 45 19 15 18 4
VPTM2420025 M24 × 2.0 WH3 120 45 19 15 18 4
VPTM2430025 M24 × 3.0 WH4 120 45 19 15 18 4
C C0.25% C 25~45 45~55 50~60
~0.25% ~0.45% 0.45%~ HRC HRC HRC
◎ ◎ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
KORLOY
Y 377
Thread
VPCM
VPC JIS spiral flute taps
35
HSSE
HELIX

Designation
2.5P
VPCM0305025 M3 × 0.5 WH2 46 11 4 3.2 6 3
VPCM0407025 M4 × 0.7 WH2 52 13 5 4 7 3
VPCM04507525 M4.5 × 0.75 WH2 55 13 5 4 7 3
VPCM0508025 M5 × 0.8 WH2 60 16 5.5 4.5 7 3
VPCM0610025 M6 × 1.0 WH2 62 19 6 4.5 7 3
VPCM0812525 M8 × 1.25 WH2 70 22 6.2 5 8 3
VPCM1012525 M10 × 1.25 WH2 75 24 7 5.5 8 3
VPCM1015025 M10 × 1.5 WH2 75 24 7 5.5 8 3
VPCM1210025 M12 × 1.0 WH2 82 29 8.5 6.5 9 3
VPCM1212525 M12 × 1.25 WH2 82 29 8.5 6.5 9 3
VPCM1215025 M12 × 1.5 WH2 82 29 8.5 6.5 9 3
VPCM1217525 M12 × 1.75 WH2 82 29 8.5 6.5 9 3
VPCM1415025 M14 × 1.5 WH2 88 30 10.5 8 11 3
VPCM1420025 M14 × 2.0 WH2 88 30 10.5 8 11 3
VPCM1615025 M16 × 1.5 WH2 95 32 12.5 10 13 3
VPCM1620025 M16 × 2.0 WH2 95 32 12.5 10 13 3
VPCM1815025 M18 × 1.5 WH2 100 37 14 11 14 4
VPCM1825025 M18 × 2.5 WH3 100 37 14 11 14 4
VPCM2015025 M20 × 1.5 WH3 105 37 15 12 15 4
VPCM2025025 M20 × 2.5 WH3 105 37 15 12 15 4
VPCM2215025 M22 × 1.5 WH3 115 38 17 13 16 4
VPCM2225025 M22 × 2.5 WH3 115 38 17 13 16 4
VPCM2415025 M24 × 1.5 WH3 120 45 19 15 18 4
VPCM2420025 M24 × 2.0 WH3 120 45 19 15 18 4
VPCM2430025 M24 × 3.0 WH4 120 45 19 15 18 4
C C0.25% C 25~45 45~55 50~60
~0.25% ~0.45% 0.45%~ HRC HRC HRC
◎ ◎ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
378 KORLOY
VPHM
VPH JIS spiral flute taps
35
HSSE
HELIX

Designation
2.5P
VPHM0305025 M3 × 0.5 WH2 46 11 4 3.2 6 3
VPHM0407025 M4 × 0.7 WH2 52 13 5 4 7 3
VPHM04507525 M4.5 × 0.75 WH2 55 13 5 4 7 3
VPHM0508025 M5 × 0.8 WH2 60 16 5.5 4.5 7 3
VPHM0610025 M6 × 1.0 WH2 62 19 6 4.5 7 3
VPHM0812525 M8 × 1.25 WH2 70 22 6.2 5 8 3
VPHM1012525 M10 × 1.25 WH2 75 24 7 5.5 8 3
VPHM1015025 M10 × 1.5 WH2 75 24 7 5.5 8 3
VPHM1210025 M12 × 1.0 WH2 82 29 8.5 6.5 9 3
VPHM1212525 M12 × 1.25 WH2 82 29 8.5 6.5 9 3
VPHM1215025 M12 × 1.5 WH2 82 29 8.5 6.5 9 3
VPHM1217525 M12 × 1.75 WH2 82 29 8.5 6.5 9 3
VPHM1415025 M14 × 1.5 WH2 88 30 10.5 8 11 3
VPHM1420025 M14 × 2.0 WH2 88 30 10.5 8 11 3
VPHM1615025 M16 × 1.5 WH2 95 32 12.5 10 13 3
VPHM1620025 M16 × 2.0 WH2 95 32 12.5 10 13 3
VPHM1815025 M18 × 1.5 WH2 100 37 14 11 14 4
VPHM1825025 M18 × 2.5 WH3 100 37 14 11 14 4
VPHM2015025 M20 × 1.5 WH3 105 37 15 12 15 4
VPHM2025025 M20 × 2.5 WH3 105 37 15 12 15 4
VPHM2215025 M22 × 1.5 WH3 115 38 17 13 16 4
VPHM2225025 M22 × 2.5 WH3 115 38 17 13 16 4
VPHM2415025 M24 × 1.5 WH3 120 45 19 15 18 4
VPHM2420025 M24 × 2.0 WH3 120 45 19 15 18 4
VPHM2430025 M24 × 3.0 WH4 120 45 19 15 18 4
C C0.25% C 25~45 45~55 50~60
~0.25% ~0.45% 0.45%~ HRC HRC HRC
◎ ◎ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
KORLOY
Y 379
Thread
TAP
VNOM
VNO JIS spiral point taps
Un-
HSSE coated

Designation
5P
VNOM0305050 M3 × 0.5 WH2 46 11 4 3.2 6 3
VNOM0407050 M4 × 0.7 WH2 52 13 5 4 7 3
VNOM0508050 M5 × 0.8 WH2 60 16 5.5 4.5 7 3
VNOM0610050 M6 × 1.0 WH2 62 19 6 4.5 7 3
VNOM0812550 M8 × 1.25 WH3 70 22 6.2 5 8 3
VNOM1012550 M10 × 1.25 WH3 75 24 7 5.5 8 3
VNOM1015050 M10 × 1.5 WH3 75 24 7 5.5 8 3
VNOM1210050 M12 × 1.0 WH3 82 29 8.5 6.5 9 3
VNOM1212550 M12 × 1.25 WH3 82 29 8.5 6.5 9 3
VNOM1215050 M12 × 1.5 WH3 82 29 8.5 6.5 9 3
VNOM1217550 M12 × 1.75 WH4 82 29 8.5 6.5 9 3
VNOM1415050 M14 × 1.5 WH3 88 30 10.5 8 11 3
VNOM1420050 M14 × 2.0 WH4 88 30 10.5 8 11 3
VNOM1615050 M16 × 1.5 WH3 95 32 12.5 10 13 3
VNOM1620050 M16 × 2.0 WH4 95 32 12.5 10 13 3
VNOM1815050 M18 × 1.5 WH4 100 37 14 11 14 3
VNOM1825050 M18 × 2.5 WH4 100 37 14 11 14 3
VNOM2015050 M20 × 1.5 WH4 105 37 15 12 15 3
VNOM2025050 M20 × 2.5 WH4 105 37 15 12 15 3
VNOM2215050 M22 × 1.5 WH4 115 38 17 13 16 3
VNOM2225050 M22 × 2.5 WH4 115 38 17 13 16 3
VNOM2415050 M24 × 1.5 WH4 120 45 19 15 18 3
VNOM2420050 M24 × 2.0 WH4 120 45 19 15 18 3
VNOM2430050 M24 × 3.0 WH4 120 45 19 15 18 3
C C0.25% C 25~45 45~55 50~60
~0.25% ~0.45% 0.45%~ HRC HRC HRC
○ ○ ◎ ○ ○ ○ ○ ○ ○ ◎ ○ ○ ○ ○
380 KORLOY
VNTM
VNT JIS flute point taps
HSSE

Designation
5P
VNTM0305050 M3 × 0.5 WH2 46 11 4 3.2 6 3
VNTM0407050 M4 × 0.7 WH2 52 13 5 4 7 3
VNTM0508050 M5 × 0.8 WH2 60 16 5.5 4.5 7 3
VNTM0610050 M6 × 1.0 WH2 62 19 6 4.5 7 3
VNTM0812550 M8 × 1.25 WH3 70 22 6.2 5 8 3
VNTM1012550 M10 × 1.25 WH3 75 24 7 5.5 8 3
VNTM1015050 M10 × 1.5 WH3 75 24 7 5.5 8 3
VNTM1210050 M12 × 1.0 WH3 82 29 8.5 6.5 9 3
VNTM1212550 M12 × 1.25 WH3 82 29 8.5 6.5 9 3
VNTM1215050 M12 × 1.5 WH3 82 29 8.5 6.5 9 3
VNTM1217550 M12 × 1.75 WH4 82 29 8.5 6.5 9 3
VNTM1415050 M14 × 1.5 WH3 88 30 10.5 8 11 3
VNTM1420050 M14 × 2.0 WH4 88 30 10.5 8 11 3
VNTM1615050 M16 × 1.5 WH3 95 32 12.5 10 13 3
VNTM1620050 M16 × 2.0 WH4 95 32 12.5 10 13 3
VNTM1815050 M18 × 1.5 WH4 100 37 14 11 14 3
VNTM1825050 M18 × 2.5 WH4 100 37 14 11 14 3
VNTM2015050 M20 × 1.5 WH4 105 37 15 12 15 3
VNTM2025050 M20 × 2.5 WH4 105 37 15 12 15 3
VNTM2215050 M22 × 1.5 WH4 115 38 17 13 16 3
VNTM2225050 M22 × 2.5 WH4 115 38 17 13 16 3
VNTM2415050 M24 × 1.5 WH4 120 45 19 15 18 3
VNTM2420050 M24 × 2.0 WH4 120 45 19 15 18 3
VNTM2430050 M24 × 3.0 WH4 120 45 19 15 18 3
C C0.25% C 25~45 45~55 50~60
~0.25% ~0.45% 0.45%~ HRC HRC HRC
○ ○ ○ ○ ◎ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
KORLOY
Y 381
Thread
TAP
VNCM
VNC JIS flute point taps
HSSE

Designation
5P
VNCM0305050 M3 × 0.5 WH2 46 11 4 3.2 6 3
VNCM0407050 M4 × 0.7 WH2 52 13 5 4 7 3
VNCM0508050 M5 × 0.8 WH2 60 16 5.5 4.5 7 3
VNCM0610050 M6 × 1.0 WH2 62 19 6 4.5 7 3
VNCM0812550 M8 × 1.25 WH3 70 22 6.2 5 8 3
VNCM1012550 M10 × 1.25 WH3 75 24 7 5.5 8 3
VNCM1015050 M10 × 1.5 WH3 75 24 7 5.5 8 3
VNCM1210050 M12 × 1.0 WH3 82 29 8.5 6.5 9 3
VNCM1212550 M12 × 1.25 WH3 82 29 8.5 6.5 9 3
VNCM1215050 M12 × 1.5 WH3 82 29 8.5 6.5 9 3
VNCM1217550 M12 × 1.75 WH4 82 29 8.5 6.5 9 3
VNCM1415050 M14 × 1.5 WH3 88 30 10.5 8 11 3
VNCM1420050 M14 × 2.0 WH4 88 30 10.5 8 11 3
VNCM1615050 M16 × 1.5 WH3 95 32 12.5 10 13 3
VNCM1620050 M16 × 2.0 WH4 95 32 12.5 10 13 3
VNCM1815050 M18 × 1.5 WH4 100 37 14 11 14 3
VNCM1825050 M18 × 2.5 WH4 100 37 14 11 14 3
VNCM2015050 M20 × 1.5 WH4 105 37 15 12 15 3
VNCM2025050 M20 × 2.5 WH4 105 37 15 12 15 3
VNCM2215050 M22 × 1.5 WH4 115 38 17 13 16 3
VNCM2225050 M22 × 2.5 WH4 115 38 17 13 16 3
VNCM2415050 M24 × 1.5 WH4 120 45 19 15 18 3
VNCM2420050 M24 × 2.0 WH4 120 45 19 15 18 3
VNCM2430050 M24 × 3.0 WH4 120 45 19 15 18 3
C C0.25% C 25~45 45~55 50~60
~0.25% ~0.45% 0.45%~ HRC HRC HRC
◎ ◎ ◎ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
382 KORLOY
VNHM
VNH JIS flute point taps
HSSE

Designation
5P
VNHM0305050 M3 × 0.5 WH2 46 11 4 3.2 6 3
VNHM0407050 M4 × 0.7 WH2 52 13 5 4 7 3
VNHM0508050 M5 × 0.8 WH2 60 16 5.5 4.5 7 3
VNHM0610050 M6 × 1.0 WH2 62 19 6 4.5 7 3
VNHM0812550 M8 × 1.25 WH3 70 22 6.2 5 8 3
VNHM1012550 M10 × 1.25 WH3 75 24 7 5.5 8 3
VNHM1015050 M10 × 1.5 WH3 75 24 7 5.5 8 3
VNHM1210050 M12 × 1.0 WH3 82 29 8.5 6.5 9 3
VNHM1212550 M12 × 1.25 WH3 82 29 8.5 6.5 9 3
VNHM1215050 M12 × 1.5 WH3 82 29 8.5 6.5 9 3
VNHM1217550 M12 × 1.75 WH4 82 29 8.5 6.5 9 3
VNHM1415050 M14 × 1.5 WH3 88 30 10.5 8 11 3
VNHM1420050 M14 × 2.0 WH4 88 30 10.5 8 11 3
VNHM1615050 M16 × 1.5 WH3 95 32 12.5 10 13 3
VNHM1620050 M16 × 2.0 WH4 95 32 12.5 10 13 3
VNHM1815050 M18 × 1.5 WH4 100 37 14 11 14 3
VNHM1825050 M18 × 2.5 WH4 100 37 14 11 14 3
VNHM2015050 M20 × 1.5 WH4 105 37 15 12 15 3
VNHM2025050 M20 × 2.5 WH4 105 37 15 12 15 3
VNHM2215050 M22 × 1.5 WH4 115 38 17 13 16 3
VNHM2225050 M22 × 2.5 WH4 115 38 17 13 16 3
VNHM2415050 M24 × 1.5 WH4 120 45 19 15 18 3
VNHM2420050 M24 × 2.0 WH4 120 45 19 15 18 3
VNHM2430050 M24 × 3.0 WH4 120 45 19 15 18 3
C C0.25% C 25~45 45~55 50~60
~0.25% ~0.45% 0.45%~ HRC HRC HRC
◎ ◎ ○ ○ ○
KORLOY
Y 383
Thread
TAP
VSOM
VSO JIS straight flute taps
Un-
HSSE coated

Designation
1.5P 5P
VSOM0305015 VSOM0305050 M3 × 0.5 WH2 46 11 4 3.2 6 3
VSOM0407015 VSOM0407050 M4 × 0.7 WH2 52 13 5 4 7 3
VSOM0508015 VSOM0508050 M5 × 0.8 WH2 60 16 5.5 4.5 7 3
VSOM0610015 VSOM0610050 M6 × 1.0 WH2 62 19 6 4.5 7 3
VSOM0812515 VSOM0812550 M8 × 1.25 WH2 70 22 6.2 5 8 4
VSOM1012515 VSOM1012550 M10 × 1.25 WH2 75 24 7 5.5 8 4
VSOM1015015 VSOM1015050 M10 × 1.5 WH3 75 24 7 5.5 8 4
VSOM1210015 VSOM1210050 M12 × 1.0 WH2 82 29 8.5 6.5 9 4
VSOM1212515 VSOM1212550 M12 × 1.25 WH2 82 29 8.5 6.5 9 4
VSOM1215015 VSOM1215050 M12 × 1.5 WH3 82 29 8.5 6.5 9 4
VSOM1217515 VSOM1217550 M12 × 1.75 WH3 82 29 8.5 6.5 9 4
VSOM1415015 VSOM1415050 M14 × 1.5 WH3 88 30 10.5 8 11 4
VSOM1420015 VSOM1420050 M14 × 2.0 WH3 88 30 10.5 8 11 4
VSOM1615015 VSOM1615050 M16 × 1.5 WH3 95 32 12.5 10 13 4
VSOM1620015 VSOM1620050 M16 × 2.0 WH3 95 32 12.5 10 13 4
VSOM1815015 VSOM1815050 M18 × 1.5 WH3 100 37 14 11 14 4
VSOM1825015 VSOM1825050 M18 × 2.5 WH3 100 37 14 11 14 4
VSOM2015015 VSOM2015050 M20 × 1.5 WH3 105 37 15 12 15 4
VSOM2025015 VSOM2025050 M20 × 2.5 WH3 105 37 15 12 15 4
VSOM2215015 VSOM2215050 M22 × 1.5 WH3 115 38 17 13 16 4
VSOM2225015 VSOM2225050 M22 × 2.5 WH3 115 38 17 13 16 4
VSOM2415015 VSOM2415050 M24 × 1.5 WH3 120 45 19 15 18 4
VSOM2420015 VSOM2420050 M24 × 2.0 WH3 120 45 19 15 18 4
VSOM2430015 VSOM2430050 M24 × 3.0 WH3 120 45 19 15 18 4
1.5P Tap is removed external center as bottoming type
C C0.25% C 25~45 45~55 50~60
~0.25% ~0.45% 0.45%~ HRC HRC HRC
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
384 KORLOY
VSTM
VST JIS straight flute taps
HSSE

Designation
1.5P 5P
VSTM0305015 VSTM0305050 M3 × 0.5 WH2 46 11 4 3.2 6 3
VSTM0407015 VSTM0407050 M4 × 0.7 WH2 52 13 5 4 7 3
VSTM0508015 VSTM0508050 M5 × 0.8 WH2 60 16 5.5 4.5 7 3
VSTM0610015 VSTM0610050 M6 × 1.0 WH2 62 19 6 4.5 7 3
VSTM0812515 VSTM0812550 M8 × 1.25 WH2 70 22 6.2 5 8 4
VSTM1012515 VSTM1012550 M10 × 1.25 WH2 75 24 7 5.5 8 4
VSTM1015015 VSTM1015050 M10 × 1.5 WH3 75 24 7 5.5 8 4
VSTM1210015 VSTM1210050 M12 × 1.0 WH2 82 29 8.5 6.5 9 4
VSTM1212515 VSTM1212550 M12 × 1.25 WH2 82 29 8.5 6.5 9 4
VSTM1215015 VSTM1215050 M12 × 1.5 WH3 82 29 8.5 6.5 9 4
VSTM1217515 VSTM1217550 M12 × 1.75 WH3 82 29 8.5 6.5 9 4
VSTM1415015 VSTM1415050 M14 × 1.5 WH3 88 30 10.5 8 11 4
VSTM1420015 VSTM1420050 M14 × 2.0 WH3 88 30 10.5 8 11 4
VSTM1615015 VSTM1615050 M16 × 1.5 WH3 95 32 12.5 10 13 4
VSTM1620015 VSTM1620050 M16 × 2.0 WH3 95 32 12.5 10 13 4
VSTM1815015 VSTM1815050 M18 × 1.5 WH3 100 37 14 11 14 4
VSTM1825015 VSTM1825050 M18 × 2.5 WH3 100 37 14 11 14 4
VSTM2015015 VSTM2015050 M20 × 1.5 WH3 105 37 15 12 15 4
VSTM2025015 VSTM2025050 M20 × 2.5 WH3 105 37 15 12 15 4
VSTM2215015 VSTM2215050 M22 × 1.5 WH3 115 38 17 13 16 4
VSTM2225015 VSTM2225050 M22 × 2.5 WH3 115 38 17 13 16 4
VSTM2415015 VSTM2415050 M24 × 1.5 WH3 120 45 19 15 18 4
VSTM2420015 VSTM2420050 M24 × 2.0 WH3 120 45 19 15 18 4
VSTM2430015 VSTM2430050 M24 × 3.0 WH3 120 45 19 15 18 4
C C0.25% C 25~45 45~55 50~60
~0.25% ~0.45% 0.45%~ HRC HRC HRC
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
KORLOY
Y 385
Thread
TAP
VSCM
VSC JIS straight flute taps
HSSE

Designation
1.5P 5P
VSCM0305015 VSCM0305050 M3 × 0.5 WH2 46 11 4 3.2 6 3
VSCM0407015 VSCM0407050 M4 × 0.7 WH2 52 13 5 4 7 3
VSCM0508015 VSCM0508050 M5 × 0.8 WH2 60 16 5.5 4.5 7 3
VSCM0610015 VSCM0610050 M6 × 1.0 WH2 62 19 6 4.5 7 3
VSCM0812515 VSCM0812550 M8 × 1.25 WH2 70 22 6.2 5 8 4
VSCM1012515 VSCM1012550 M10 × 1.25 WH2 75 24 7 5.5 8 4
VSCM1015015 VSCM1015050 M10 × 1.5 WH3 75 24 7 5.5 8 4
VSCM1210015 VSCM1210050 M12 × 1.0 WH2 82 29 8.5 6.5 9 4
VSCM1212515 VSCM1212550 M12 × 1.25 WH2 82 29 8.5 6.5 9 4
VSCM1215015 VSCM1215050 M12 × 1.5 WH3 82 29 8.5 6.5 9 4
VSCM1217515 VSCM1217550 M12 × 1.75 WH3 82 29 8.5 6.5 9 4
VSCM1415015 VSCM1415050 M14 × 1.5 WH3 88 30 10.5 8 11 4
VSCM1420015 VSCM1420050 M14 × 2.0 WH3 88 30 10.5 8 11 4
VSCM1615015 VSCM1615050 M16 × 1.5 WH3 95 32 12.5 10 13 4
VSCM1620015 VSCM1620050 M16 × 2.0 WH3 95 32 12.5 10 13 4
VSCM1815015 VSCM1815050 M18 × 1.5 WH3 100 37 14 11 14 4
VSCM1825015 VSCM1825050 M18 × 2.5 WH3 100 37 14 11 14 4
VSCM2015015 VSCM2015050 M20 × 1.5 WH3 105 37 15 12 15 4
VSCM2025015 VSCM2025050 M20 × 2.5 WH3 105 37 15 12 15 4
VSCM2215015 VSCM2215050 M22 × 1.5 WH3 115 38 17 13 16 4
VSCM2225015 VSCM2225050 M22 × 2.5 WH3 115 38 17 13 16 4
VSCM2415015 VSCM2415050 M24 × 1.5 WH3 120 45 19 15 18 4
VSCM2420015 VSCM2420050 M24 × 2.0 WH3 120 45 19 15 18 4
VSCM2430015 VSCM2430050 M24 × 3.0 WH3 120 45 19 15 18 4
C C0.25% C 25~45 45~55 50~60
~0.25% ~0.45% 0.45%~ HRC HRC HRC
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
386 KORLOY
VSHM
VSH JIS straight flute taps
HSSE

Designation
1.5P 5P
VSHM0305015 VSHM0305050 M3 × 0.5 WH2 46 11 4 3.2 6 3
VSHM0407015 VSHM0407050 M4 × 0.7 WH2 52 13 5 4 7 3
VSHM0508015 VSHM0508050 M5 × 0.8 WH2 60 16 5.5 4.5 7 3
VSHM0610015 VSHM0610050 M6 × 1.0 WH2 62 19 6 4.5 7 3
VSHM0812515 VSHM0812550 M8 × 1.25 WH2 70 22 6.2 5 8 4
VSHM1012515 VSHM1012550 M10 × 1.25 WH2 75 24 7 5.5 8 4
VSHM1015015 VSHM1015050 M10 × 1.5 WH3 75 24 7 5.5 8 4
VSHM1210015 VSHM1210050 M12 × 1.0 WH2 82 29 8.5 6.5 9 4
VSHM1212515 VSHM1212550 M12 × 1.25 WH2 82 29 8.5 6.5 9 4
VSHM1215015 VSHM1215050 M12 × 1.5 WH3 82 29 8.5 6.5 9 4
VSHM1217515 VSHM1217550 M12 × 1.75 WH3 82 29 8.5 6.5 9 4
VSHM1415015 VSHM1415050 M14 × 1.5 WH3 88 30 10.5 8 11 4
VSHM1420015 VSHM1420050 M14 × 2.0 WH3 88 30 10.5 8 11 4
VSHM1615015 VSHM1615050 M16 × 1.5 WH3 95 32 12.5 10 13 4
VSHM1620015 VSHM1620050 M16 × 2.0 WH3 95 32 12.5 10 13 4
VSHM1815015 VSHM1815050 M18 × 1.5 WH3 100 37 14 11 14 4
VSHM1825015 VSHM1825050 M18 × 2.5 WH3 100 37 14 11 14 4
VSHM2015015 VSHM2015050 M20 × 1.5 WH3 105 37 15 12 15 4
VSHM2025015 VSHM2025050 M20 × 2.5 WH3 105 37 15 12 15 4
VSHM2215015 VSHM2215050 M22 × 1.5 WH3 115 38 17 13 16 4
VSHM2225015 VSHM2225050 M22 × 2.5 WH3 115 38 17 13 16 4
VSHM2415015 VSHM2415050 M24 × 1.5 WH3 120 45 19 15 18 4
VSHM2420015 VSHM2420050 M24 × 2.0 WH3 120 45 19 15 18 4
VSHM2430015 VSHM2430050 M24 × 3.0 WH3 120 45 19 15 18 4
C C0.25% C 25~45 45~55 50~60
~0.25% ~0.45% 0.45%~ HRC HRC HRC
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
KORLOY
Y 387
Thread
TAP
VROM
VRO JIS roll taps
Un-
HSSE coated

ℓ Oil
Thread size Limits L d K Kl
2P 4P groove
VROM0305020S - M3 × 0.5 GH5 46 11 4 3.2 6 S
VROM0305020M VROM0305040M M3 × 0.5 GH5 46 11 4 3.2 6 M
VROM0407020S - M4 × 0.7 GH6 52 13 5 4 7 S
VROM0407020M VROM0407040M M4 × 0.7 GH6 52 13 5 4 7 M
VROM0508020S - M5 × 0.8 GH6 60 16 5.5 4.5 7 S
VROM0508020M VROM0508040M M5 × 0.8 GH6 60 16 5.5 4.5 7 M
VROM0610020S - M6 × 1.0 GH7 62 19 6 4.5 7 S
VROM0610020M VROM0610040M M6 × 1.0 GH7 62 19 6 4.5 7 M
VROM0812520S - M8 × 1.25 GH7 70 22 6.2 5 8 S
VROM0812520M VROM0812540M M8 × 1.25 GH7 70 22 6.2 5 8 M
VROM1012520S - M10 × 1.25 GH7 75 24 7 5.5 8 S
VROM1012520M VROM1012540M M10 × 1.25 GH7 75 24 7 5.5 8 M
VROM1015020S - M10 × 1.5 GH7 75 24 7 5.5 8 S
VROM1015020M VROM1015040M M10 × 1.5 GH7 75 24 7 5.5 8 M
VROM1210020S - M12 × 1.0 GH7 82 29 8.5 6.5 9 S
VROM1210020M VROM1210040M M12 × 1.0 GH7 82 29 8.5 6.5 9 M
VROM1212520S - M12 × 1.25 GH7 82 29 8.5 6.5 9 S
VROM1212520M VROM1212540M M12 × 1.25 GH7 82 29 8.5 6.5 9 M
VROM1215020S - M12 × 1.5 GH7 82 29 8.5 6.5 9 S
VROM1215020M VROM1215040M M12 × 1.5 GH7 82 29 8.5 6.5 9 M
VROM1217520S - M12 × 1.75 GH8 82 29 8.5 6.5 9 S
VROM1217520M VROM1217540M M12 × 1.75 GH8 82 29 8.5 6.5 9 M
2.0P Tap is removed external center as bottoming type Oil groove S: 1 oil groove
Oil groove M: 4 oil groove
C C0.25% C 25~45 45~55 50~60
~0.25% ~0.45% 0.45%~ HRC HRC HRC
◎ ◎ ◎ ◎ ◎ ◎
388 KORLOY
VRTM
VRT JIS roll taps
HSSE

Designation Oil
Thread size Limits L ℓ d K Kl
2P 4P groove
VRTM0305020S - M3 × 0.5 GH5 46 11 4 3.2 6 S
VRTM0305020M VRTM0305040M M3 × 0.5 GH6 46 11 4 3.2 6 M
VRTM0407020S - M4 × 0.7 GH6 52 13 5 4 7 S
VRTM0407020M VRTM0407040M M4 × 0.7 GH6 52 13 5 4 7 M
VRTM0508020S - M5 × 0.8 GH6 60 16 5.5 4.5 7 S
VRTM0508020M VRTM0508040M M5 × 0.8 GH6 60 16 5.5 4.5 7 M
VRTM0610020S - M6 × 1.0 GH7 62 19 6 4.5 7 S
VRTM0610020M VRTM0610040M M6 × 1.0 GH7 62 19 6 4.5 7 M
VRTM0812520S - M8 × 1.25 GH7 70 22 6.2 5 8 S
VRTM0812520M VRTM0812540M M8 × 1.25 GH7 70 22 6.2 5 8 M
VRTM1012520S - M10 × 1.25 GH7 75 24 7 5.5 8 S
VRTM1012520M VRTM1012540M M10 × 1.25 GH7 75 24 7 5.5 8 M
VRTM1015020S - M10 × 1.5 GH7 75 24 7 5.5 8 S
VRTM1015020M VRTM1015040M M10 × 1.5 GH7 75 24 7 5.5 8 M
VRTM1210020S - M12 × 1.0 GH7 82 29 8.5 6.5 9 S
VRTM1210020M VRTM1210040M M12 × 1.0 GH7 82 29 8.5 6.5 9 M
VRTM1212520S - M12 × 1.25 GH7 82 29 8.5 6.5 9 S
VRTM1212520M VRTM1212540M M12 × 1.25 GH7 82 29 8.5 6.5 9 M
VRTM1215020S - M12 × 1.5 GH7 82 29 8.5 6.5 9 S
VRTM1215020M VRTM1215040M M12 × 1.5 GH7 82 29 8.5 6.5 9 M
VRTM1217520S - M12 × 1.75 GH8 82 29 8.5 6.5 9 S
VRTM1217520M VRTM1217540M M12 × 1.75 GH8 82 29 8.5 6.5 9 M
C C0.25% C 25~45 45~55 50~60
~0.25% ~0.45% 0.45%~ HRC HRC HRC
◎ ◎ ◎ ◎ ◎ ◎
KORLOY
Y 389
Thread
TAP
VRCM
VRC JIS roll taps
HSSE

ℓ Oil
Thread size Limits L d K Kl
2P 4P groove
VRCM0305020S - M3 × 0.5 GH5 46 11 4 3.2 6 S
VRCM0305020M VRCM0305040M M3 × 0.5 GH5 46 11 4 3.2 6 M
VRCM0407020S - M4 × 0.7 GH6 52 13 5 4 7 S
VRCM0407020M VRCM0407040M M4 × 0.7 GH6 52 13 5 4 7 M
VRCM0508020S - M5 × 0.8 GH6 60 16 5.5 4.5 7 S
VRCM0508020M VRCM0508040M M5 × 0.8 GH6 60 16 5.5 4.5 7 M
VRCM0610020S - M6 × 1.0 GH7 62 19 6 4.5 7 S
VRCM0610020M VRCM0610040M M6 × 1.0 GH7 62 19 6 4.5 7 M
VRCM0812520S - M8 × 1.25 GH7 70 22 6.2 5 8 S
VRCM0812520M VRCM0812540M M8 × 1.25 GH7 70 22 6.2 5 8 M
VRCM1012520S - M10 × 1.25 GH7 75 24 7 5.5 8 S
VRCM1012520M VRCM1012540M M10 × 1.25 GH7 75 24 7 5.5 8 M
VRCM1015020S - M10 × 1.50 GH7 75 24 7 5.5 8 S
VRCM1015020M VRCM1015040M M10 × 1.50 GH7 75 24 7 5.5 8 M
VRCM1210020S - M12 × 1.0 GH7 82 29 8.5 6.5 9 S
VRCM1210020M VRCM1210040M M12 × 1.0 GH7 82 29 8.5 6.5 9 M
VRCM1212520S - M12 × 1.25 GH7 82 29 8.5 6.5 9 S
VRCM1212520M VRCM1212540M M12 × 1.25 GH7 82 29 8.5 6.5 9 M
VRCM1215020S - M12 × 1.5 GH7 82 29 8.5 6.5 9 S
VRCM1215020M VRCM1215040M M12 × 1.5 GH7 82 29 8.5 6.5 9 M
VRCM1217520S - M12 × 1.75 GH8 82 29 8.5 6.5 9 S
VRCM1217520M VRCM1217540M M12 × 1.75 GH8 82 29 8.5 6.5 9 M
C C0.25% C 25~45 45~55 50~60
~0.25% ~0.45% 0.45%~ HRC HRC HRC
◎ ◎ ◎ ◎ ◎ ◎
390 KORLOY
VFOM JIS spiral roll taps
Un-
HSSE coated
2P / 4P Ød
Kl K
L
Designation
2P 4P
VFOM0305020 VFOM0305040 M3 × 0.5 GH6 46 18 4 3.2 6
VFOM03506020 VFOM03506040 M3.5 × 0.6 GH6 46 18 4 3.2 6
VFOM0407020 VFOM0407040 M4 × 0.7 GH7 52 20 5 4 7
VFOM0508020 VFOM0508040 M5 × 0.8 GH7 60 22 5.5 4.5 7
VFOM0610020 VFOM0610040 M6 × 1.0 GH7 62 24 6 4.5 7
C C0.25% C 25~45 45~55 50~60
~0.25% ~0.45% 0.45%~ HRC HRC HRC
○ ○ ○ ○ ○ ○
KORLOY 391
Thread
TAP
VFTM
VFT JIS spiral roll taps
HSSE

Designation
2P 4P
VFTM0305020 VFTM0305040 M3 × 0.5 GH6 46 18 4 3.2 6
VFTM03506020 VFTM03506040 M3.5 × 0.6 GH6 46 18 4 3.2 6
VFTM0407020 VFTM0407040 M4 × 0.7 GH7 52 20 5 4 7
VFTM0508020 VFTM0508040 M5 × 0.8 GH7 60 22 5.5 4.5 7
VFTM0610020 VFTM0610040 M6 × 1.0 GH7 62 24 6 4.5 7
C C0.25% C 25~45 45~55 50~60
~0.25% ~0.45% 0.45%~ HRC HRC HRC
○ ○ ○ ○ ○ ○
392 KORLOY
VFCM
VFC JIS spiral roll taps
HSSE

Designation
2P 4P
VFCM0305020 VFCM0305040 M3 × 0.5 GH6 46 18 4 3.2 6
VFCM03506020 VFCM03506040 M3.5 × 0.6 GH6 46 18 4 3.2 6
VFCM0407020 VFCM0407040 M4 × 0.7 GH7 52 20 5 4 7
VFCM0508020 VFCM0508040 M5 × 0.8 GH7 60 22 5.5 4.5 7
VFCM0610020 VFCM0610040 M6 × 1.0 GH7 62 24 6 4.5 7
C C0.25% C 25~45 45~55 50~60
~0.25% ~0.45% 0.45%~ HRC HRC HRC
◎ ◎ ○ ○ ◎ ◎ ◎ ◎ ◎ ◎ ◎
KORLOY
Y 393
Thread
TAP
VQOM
VQO DIN spiral flute taps
DIN 35 Un-
371-376 HSSE coated
374 HELIX

Thread size Limits L ℓ d K Kl Z Din type

2.5P
VQOM0305025 M3 × 0.5 6H 56 11 3.5 2.7 6 3 371
VQOM0407025 M4 × 0.7 6H 63 13 4.5 3.4 6 3 371
VQOM0508025 M5 × 0.8 6H 70 15 6 4.9 8 3 371
VQOM0610025 M6 × 1.0 6H 80 17 6 4.9 8 3 371
VQOM0810025 M8 × 1.0 6H 90 17 6 4.9 8 3 374
VQOM0812525 M8 × 1.25 6H 90 20 8 6.2 9 3 371
VQOM1010025 M10 × 1.0 6H 90 18 7 5.5 8 3 374
VQOM1012525 M10 × 1.25 6H 100 22 7 5.5 8 3 374
VQOM1015025 M10 × 1.5 6H 100 22 10 8 11 3 371
VQOM1210025 M12 × 1.0 6H 100 18 9 7 10 3 374
VQOM1212525 M12 × 1.25 6H 100 22 9 7 10 3 374
VQOM1215025 M12 × 1.5 6H 100 22 9 7 10 3 374
VQOM1217525 M12 × 1.75 6H 110 24 9 7 10 3 376
VQOM1415025 M14 × 1.5 6H 100 22 11 9 12 3 374
VQOM1420025 M14 × 2.0 6H 110 26 11 9 12 3 376
VQOM1615025 M16 × 1.5 6H 100 22 12 9 12 3 374
VQOM1620025 M16 × 2.0 6H 110 27 12 9 12 3 376
VQOM1815025 M18 × 1.5 6H 110 25 14 11 14 4 374
VQOM1825025 M18 × 2.5 6H 125 30 14 11 14 4 376
VQOM2015025 M20 × 1.5 6H 125 25 16 12 15 4 374
VQOM2025025 M20 × 2.5 6H 140 32 16 12 15 4 376
VQOM2215025 M22 × 1.5 6H 125 25 18 14.5 17 4 374
VQOM2225025 M22 × 2.5 6H 140 32 18 14.5 17 4 376
VQOM2415025 M24 × 1.5 6H 140 27 18 14.5 17 4 374
VQOM2420025 M24 × 2.0 6H 140 27 18 14.5 17 4 374
VQOM2430025 M24 × 3.0 6H 160 34 18 14.5 17 4 376
C C0.25% C 25~45 45~55 50~60
~0.25% ~0.45% 0.45%~ HRC HRC HRC
◎ ◎ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
394 KORLOY
VQTM
VQT DIN spiral flute taps
DIN 35
371-376 HSSE
374 HELIX

Designation
2.5P
VQTM0305025 M3 × 0.5 6H 56 11 3.5 2.7 6 3 371
VQTM0407025 M4 × 0.7 6H 63 13 4.5 3.4 6 3 371
VQTM0508025 M5 × 0.8 6H 70 15 6 4.9 8 3 371
VQTM0610025 M6 × 1.0 6H 80 17 6 4.9 8 3 371
VQTM0810025 M8 × 1.0 6H 90 17 6 4.9 8 3 374
VQTM0812525 M8 × 1.25 6H 90 20 8 6.2 9 3 371
VQTM1010025 M10 × 1.0 6H 90 18 7 5.5 8 3 374
VQTM1012525 M10 × 1.25 6H 100 22 7 5.5 8 3 374
VQTM1015025 M10 × 1.5 6H 100 22 10 8 11 3 371
VQTM1210025 M12 × 1.0 6H 100 18 9 7 10 3 374
VQTM1212525 M12 × 1.25 6H 100 22 9 7 10 3 374
VQTM1215025 M12 × 1.5 6H 100 22 9 7 10 3 374
VQTM1217525 M12 × 1.75 6H 110 24 9 7 10 3 376
VQTM1415025 M14 × 1.5 6H 100 22 11 9 12 3 374
VQTM1420025 M14 × 2.0 6H 110 26 11 9 12 3 376
VQTM1615025 M16 × 1.5 6H 100 22 12 9 12 3 374
VQTM1620025 M16 × 2.0 6H 110 27 12 9 12 3 376
VQTM1815025 M18 × 1.5 6H 110 25 14 11 14 4 374
VQTM1825025 M18 × 2.5 6H 125 30 14 11 14 4 376
VQTM2015025 M20 × 1.5 6H 125 25 16 12 15 4 374
VQTM2025025 M20 × 2.5 6H 140 32 16 12 15 4 376
VQTM2215025 M22 × 1.5 6H 125 25 18 14.5 17 4 374
VQTM2225025 M22 × 2.5 6H 140 32 18 14.5 17 4 376
VQTM2415025 M24 × 1.5 6H 140 27 18 14.5 17 4 374
VQTM2420025 M24 × 2.0 6H 140 27 18 14.5 17 4 374
VQTM2430025 M24 × 3.0 6H 160 34 18 14.5 17 4 376
C C0.25% C 25~45 45~55 50~60
~0.25% ~0.45% 0.45%~ HRC HRC HRC
◎ ◎ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
KORLOY
Y 395
Thread
TAP
VQCM
VQC DIN spiral flute taps
DIN 35
371-376 HSSE
374 HELIX


2.5P
VQCM0305025 M3 × 0.5 6H 56 11 3.5 2.7 6 3 371
VQCM0407025 M4 × 0.7 6H 63 13 4.5 3.4 6 3 371
VQCM0508025 M5 × 0.8 6H 70 15 6 4.9 8 3 371
VQCM0610025 M6 × 1.0 6H 80 17 6 4.9 8 3 371
VQCM0810025 M8 × 1.0 6H 90 17 6 4.9 8 3 374
VQCM0812525 M8 × 1.25 6H 90 20 8 6.2 9 3 371
VQCM1010025 M10 × 1.0 6H 90 18 7 5.5 8 3 374
VQCM1012525 M10 × 1.25 6H 100 22 7 5.5 8 3 374
VQCM1015025 M10 × 1.5 6H 100 22 10 8 11 3 371
VQCM1210025 M12 × 1.0 6H 100 18 9 7 10 3 374
VQCM1212525 M12 × 1.25 6H 100 22 9 7 10 3 374
VQCM1215025 M12 × 1.5 6H 100 22 9 7 10 3 374
VQCM1217525 M12 × 1.75 6H 110 24 9 7 10 3 376
VQCM1415025 M14 × 1.5 6H 100 22 11 9 12 3 374
VQCM1420025 M14 × 2.0 6H 110 26 11 9 12 3 376
VQCM1615025 M16 × 1.5 6H 100 22 12 9 12 3 374
VQCM1620025 M16 × 2.0 6H 110 27 12 9 12 3 376
VQCM1815025 M18 × 1.5 6H 110 25 14 11 14 4 374
VQCM1825025 M18 × 2.5 6H 125 30 14 11 14 4 376
VQCM2015025 M20 × 1.5 6H 125 25 16 12 15 4 374
VQCM2025025 M20 × 2.5 6H 140 32 16 12 15 4 376
VQCM2215025 M22 × 1.5 6H 125 25 18 14.5 17 4 374
VQCM2225025 M22 × 2.5 6H 140 32 18 14.5 17 4 376
VQCM2415025 M24 × 1.5 6H 140 27 18 14.5 17 4 374
VQCM2420025 M24 × 2.0 6H 140 27 18 14.5 17 4 374
VQCM2430025 M24 × 3.0 6H 160 34 18 14.5 17 4 376
C C0.25% C 25~45 45~55 50~60
~0.25% ~0.45% 0.45%~ HRC HRC HRC
◎ ◎ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
396 KORLOY
VQHM
VQH DIN spiral flute taps
DIN 35
371-376 HSSE
374 HELIX

Designation
2.5P
VQHM0305025 M3 × 0.5 6H 56 11 3.5 2.7 6 3 371
VQHM0407025 M4 × 0.7 6H 63 13 4.5 3.4 6 3 371
VQHM0508025 M5 × 0.8 6H 70 15 6 4.9 8 3 371
VQHM0610025 M6 × 1.0 6H 80 17 6 4.9 8 3 371
VQHM0810025 M8 × 1.0 6H 90 17 6 4.9 8 3 374
VQHM0812525 M8 × 1.25 6H 90 20 8 6.2 9 3 371
VQHM1010025 M10 × 1.0 6H 90 18 7 5.5 8 3 374
VQHM1012525 M10 × 1.25 6H 100 22 7 5.5 8 3 374
VQHM1015025 M10 × 1.5 6H 100 22 10 8 11 3 371
VQHM1210025 M12 × 1.0 6H 100 18 9 7 10 3 374
VQHM1212525 M12 × 1.25 6H 100 22 9 7 10 3 374
VQHM1215025 M12 × 1.5 6H 100 22 9 7 10 3 374
VQHM1217525 M12 × 1.75 6H 110 24 9 7 10 3 376
VQHM1415025 M14 × 1.5 6H 100 22 11 9 12 3 374
VQHM1420025 M14 × 2.0 6H 110 26 11 9 12 3 376
VQHM1615025 M16 × 1.5 6H 100 22 12 9 12 3 374
VQHM1620025 M16 × 2.0 6H 110 27 12 9 12 3 376
VQHM1815025 M18 × 1.5 6H 110 25 14 11 14 4 374
VQHM1825025 M18 × 2.5 6H 125 30 14 11 14 4 376
VQHM2015025 M20 × 1.5 6H 125 25 16 12 15 4 374
VQHM2025025 M20 × 2.5 6H 140 32 16 12 15 4 376
VQHM2215025 M22 × 1.5 6H 125 25 18 14.5 17 4 374
VQHM2225025 M22 × 2.5 6H 140 32 18 14.5 17 4 376
VQHM2415025 M24 × 1.5 6H 140 27 18 14.5 17 4 374
VQHM2420025 M24 × 2.0 6H 140 27 18 14.5 17 4 374
VQHM2430025 M24 × 3.0 6H 160 34 18 14.5 17 4 376
C C0.25% C 25~45 45~55 50~60
~0.25% ~0.45% 0.45%~ HRC HRC HRC
◎ ◎ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
KORLOY
Y 397
Thread
TAP
VDOM
VDO DIN point flute taps
DIN Un-
371-376 HSSE coated
374


5P
VDOM0305050 M3 × 0.5 6H 56 11 3.5 2.7 6 3 371
VDOM0407050 M4 × 0.7 6H 63 13 4.5 3.4 6 3 371
VDOM0508050 M5 × 0.8 6H 70 15 6 4.9 8 3 371
VDOM0610050 M6 × 1.0 6H 80 17 6 4.9 8 3 371
VDOM0810050 M8 × 1.0 6H 90 17 6 4.9 8 3 374
VDOM0812550 M8 × 1.25 6H 90 20 8 6.2 9 3 371
VDOM1010050 M10 × 1.0 6H 90 18 7 5.5 8 3 374
VDOM1012550 M10 × 1.25 6H 100 22 7 5.5 8 3 374
VDOM1015050 M10 × 1.5 6H 100 22 10 8 11 3 371
VDOM1210050 M12 × 1.0 6H 100 18 9 7 10 3 374
VDOM1212550 M12 × 1.25 6H 100 22 9 7 10 3 374
VDOM1215050 M12 × 1.5 6H 100 22 9 7 10 3 374
VDOM1217550 M12 × 1.75 6H 110 24 9 7 10 3 376
VDOM1415050 M14 × 1.5 6H 100 22 11 9 12 3 374
VDOM1420050 M14 × 2.0 6H 110 26 11 9 12 3 376
VDOM1615050 M16 × 1.5 6H 100 22 12 9 12 3 374
VDOM1620050 M16 × 2.0 6H 110 27 12 9 12 3 376
VDOM1815050 M18 × 1.5 6H 110 25 14 11 14 3 374
VDOM1825050 M18 × 2.5 6H 125 30 14 11 14 3 376
VDOM2015050 M20 × 1.5 6H 125 25 16 12 15 3 374
VDOM2025050 M20 × 2.5 6H 140 32 16 12 15 3 376
VDOM2215050 M22 × 1.5 6H 125 25 18 14.5 17 3 374
VDOM2225050 M22 × 2.5 6H 140 32 18 14.5 17 3 376
VDOM2415050 M24 × 1.5 6H 140 27 18 14.5 17 3 374
VDOM2420050 M24 × 2.0 6H 140 27 18 14.5 17 3 374
VDOM2430050 M24 × 3.0 6H 160 34 18 14.5 17 3 376
C C0.25% C 25~45 45~55 50~60
~0.25% ~0.45% 0.45%~ HRC HRC HRC
○ ○ ◎ ○ ○ ○ ○ ○ ○ ◎ ○ ○ ○ ○
398 KORLOY
VDTM DIN point flute taps
DIN
371-376 HSSE
374
5P
Ød
Kl K
L
Designation
5P
VDTM0305050 M3 × 0.5 6H 56 11 3.5 2.7 6 3 371
VDTM0407050 M4 × 0.7 6H 63 13 4.5 3.4 6 3 371
VDTM0508050 M5 × 0.8 6H 70 15 6 4.9 8 3 371
VDTM0610050 M6 × 1.0 6H 80 17 6 4.9 8 3 371
VDTM0810050 M8 × 1.0 6H 90 17 6 4.9 8 3 374
VDTM0812550 M8 × 1.25 6H 90 20 8 6.2 9 3 371
VDTM1010050 M10 × 1.0 6H 90 18 7 5.5 8 3 374
VDTM1012550 M10 × 1.25 6H 100 22 7 5.5 8 3 374
VDTM1015050 M10 × 1.5 6H 100 22 10 8 11 3 371
VDTM1210050 M12 × 1.0 6H 100 18 9 7 10 3 374
VDTM1212550 M12 × 1.25 6H 100 22 9 7 10 3 374
VDTM1215050 M12 × 1.5 6H 100 22 9 7 10 3 374
VDTM1217550 M12 × 1.75 6H 110 24 9 7 10 3 376
VDTM1415050 M14 × 1.5 6H 100 22 11 9 12 3 374
VDTM1420050 M14 × 2.0 6H 110 26 11 9 12 3 376
VDTM1615050 M16 × 1.5 6H 100 22 12 9 12 3 374
VDTM1620050 M16 × 2.0 6H 110 27 12 9 12 3 376
VDTM1815050 M18 × 1.5 6H 110 25 14 11 14 3 374
VDTM1825050 M18 × 2.5 6H 125 30 14 11 14 3 376
VDTM2015050 M20 × 1.5 6H 125 25 16 12 15 3 374
VDTM2025050 M20 × 2.5 6H 140 32 16 12 15 3 376
VDTM2215050 M22 × 1.5 6H 125 25 18 14.5 17 3 374
VDTM2225050 M22 × 2.5 6H 140 32 18 14.5 17 3 376
VDTM2415050 M24 × 1.5 6H 140 27 18 14.5 17 3 374
VDTM2420050 M24 × 2.0 6H 140 27 18 14.5 17 3 374
VDTM2430050 M24 × 3.0 6H 160 34 18 14.5 17 3 376
C C0.25% C 25~45 45~55 50~60
~0.25% ~0.45% 0.45%~ HRC HRC HRC
○ ○ ◎ ○ ○ ○ ○ ○ ○ ◎ ○ ○ ○ ○
KORLOY 399
Thread
TAP
VDCM
VDC DIN point flute taps
DIN
371-376 HSSE
374


5P
VDCM0305050 M3 × 0.5 6H 56 11 3.5 2.7 6 3 371
VDCM0407050 M4 × 0.7 6H 63 13 4.5 3.4 6 3 371
VDCM0508050 M5 × 0.8 6H 70 15 6 4.9 8 3 371
VDCM0610050 M6 × 1.0 6H 80 17 6 4.9 8 3 371
VDCM0810050 M8 × 1.0 6H 90 17 6 4.9 8 3 374
VDCM0812550 M8 × 1.25 6H 90 20 8 6.2 9 3 371
VDCM1010050 M10 × 1.0 6H 90 18 7 5.5 8 3 374
VDCM1012550 M10 × 1.25 6H 100 22 7 5.5 8 3 374
VDCM1015050 M10 × 1.5 6H 100 22 10 8 11 3 371
VDCM1210050 M12 × 1.0 6H 100 18 9 7 10 3 374
VDCM1212550 M12 × 1.25 6H 100 22 9 7 10 3 374
VDCM1215050 M12 × 1.5 6H 100 22 9 7 10 3 374
VDCM1217550 M12 × 1.75 6H 110 24 9 7 10 3 376
VDCM1415050 M14 × 1.5 6H 100 22 11 9 12 3 374
VDCM1420050 M14 × 2.0 6H 110 26 11 9 12 3 376
VDCM1615050 M16 × 1.5 6H 100 22 12 9 12 3 374
VDCM1620050 M16 × 2.0 6H 110 27 12 9 12 3 376
VDCM1815050 M18 × 1.5 6H 110 25 14 11 14 3 374
VDCM1825050 M18 × 2.5 6H 125 30 14 11 14 3 376
VDCM2015050 M20 × 1.5 6H 125 25 16 12 15 3 374
VDCM2025050 M20 × 2.5 6H 140 32 16 12 15 3 376
VDCM2215050 M22 × 1.5 6H 125 25 18 14.5 17 3 374
VDCM2225050 M22 × 2.5 6H 140 32 18 14.5 17 3 376
VDCM2415050 M24 × 1.5 6H 140 27 18 14.5 17 3 374
VDCM2420050 M24 × 2.0 6H 140 27 18 14.5 17 3 374
VDCM2430050 M24 × 3.0 6H 160 34 18 14.5 17 3 376
C C0.25% C 25~45 45~55 50~60
~0.25% ~0.45% 0.45%~ HRC HRC HRC
○ ○ ◎ ○ ○ ○ ○ ○ ○ ◎ ○ ○ ○ ○
400 KORLOY
VDHM
VDH DIN point flute taps
DIN
371-376 HSSE
374

Designation
5P
VDHM0305050 M3 × 0.5 6H 56 11 3.5 2.7 6 3 371
VDHM0407050 M4 × 0.7 6H 63 13 4.5 3.4 6 3 371
VDHM0508050 M5 × 0.8 6H 70 15 6 4.9 8 3 371
VDHM0610050 M6 × 1.0 6H 80 17 6 4.9 8 3 371
VDHM0810050 M8 × 1.0 6H 90 17 6 4.9 8 3 374
VDHM0812550 M8 × 1.25 6H 90 20 8 6.2 9 3 371
VDHM1010050 M10 × 1.0 6H 90 18 7 5.5 8 3 374
VDHM1012550 M10 × 1.25 6H 100 22 7 5.5 8 3 374
VDHM1015050 M10 × 1.5 6H 100 22 10 8 11 3 371
VDHM1210050 M12 × 1.0 6H 100 18 9 7 10 3 374
VDHM1212550 M12 × 1.25 6H 100 22 9 7 10 3 374
VDHM1215050 M12 × 1.5 6H 100 22 9 7 10 3 374
VDHM1217550 M12 × 1.75 6H 110 24 9 7 10 3 376
VDHM1415050 M14 × 1.5 6H 100 22 11 9 12 3 374
VDHM1420050 M14 × 2.0 6H 110 26 11 9 12 3 376
VDHM1615050 M16 × 1.5 6H 100 22 12 9 12 3 374
VDHM1620050 M16 × 2.0 6H 110 27 12 9 12 3 376
VDHM1815050 M18 × 1.5 6H 110 25 14 11 14 3 374
VDHM1825050 M18 × 2.5 6H 125 30 14 11 14 3 376
VDHM2015050 M20 × 1.5 6H 125 25 16 12 15 3 374
VDHM2025050 M20 × 2.5 6H 140 32 16 12 15 3 376
VDHM2215050 M22 × 1.5 6H 125 25 18 14.5 17 3 374
VDHM2225050 M22 × 2.5 6H 140 32 18 14.5 17 3 376
VDHM2415050 M24 × 1.5 6H 140 27 18 14.5 17 3 374
VDHM2420050 M24 × 2.0 6H 140 27 18 14.5 17 3 374
VDHM2430050 M24 × 3.0 6H 160 34 18 14.5 17 3 376
C C0.25% C 25~45 45~55 50~60
~0.25% ~0.45% 0.45%~ HRC HRC HRC
○ ○ ◎ ○ ○ ○ ○ ○ ○ ◎ ○ ○ ○ ○
KORLOY
Y 401
Thread
TAP
VGOM
VGO DIN straight flute taps
DIN Un-
371-376 HSSE coated
374

Designation
1.5P 5P
VGOM0305015 VGOM0305050 M3 × 0.5 6H 56 11 3.5 2.7 6 3 371
VGOM0407015 VGOM0407050 M4 × 0.7 6H 63 13 4.5 3.4 6 3 371
VGOM0508015 VGOM0508050 M5 × 0.8 6H 70 15 6 4.9 8 3 371
VGOM0610015 VGOM0610050 M6 × 1.0 6H 80 17 6 4.9 8 3 371
VGOM0810015 VGOM0810050 M8 × 1.0 6H 90 17 6 4.9 8 4 374
VGOM0812515 VGOM0812550 M8 × 1.25 6H 90 20 8 6.2 9 4 371
VGOM1010015 VGOM1010050 M10 × 1.0 6H 90 18 7 5.5 8 4 374
VGOM1012515 VGOM1012550 M10 × 1.25 6H 100 22 7 5.5 8 4 374
VGOM1015015 VGOM1015050 M10 × 1.5 6H 100 22 10 8 11 4 371
VGOM1210015 VGOM1210050 M12 × 1.0 6H 100 18 9 7 10 4 374
VGOM1212515 VGOM1212550 M12 × 1.25 6H 100 22 9 7 10 4 374
VGOM1215015 VGOM1215050 M12 × 1.5 6H 100 22 9 7 10 4 374
VGOM1217515 VGOM1217550 M12 × 1.75 6H 110 24 9 7 10 4 376
VGOM1415015 VGOM1415050 M14 × 1.5 6H 100 22 11 9 12 4 374
VGOM1420015 VGOM1420050 M14 × 2.0 6H 110 26 11 9 12 4 376
VGOM1615015 VGOM1615050 M16 × 1.5 6H 100 22 12 9 12 4 374
VGOM1620015 VGOM1620050 M16 × 2.0 6H 110 27 12 9 12 4 376
VGOM1815015 VGOM1815050 M18 × 1.5 6H 110 25 14 11 14 4 374
VGOM1825015 VGOM1825050 M18 × 2.5 6H 125 30 14 11 14 4 376
VGOM2015015 VGOM2015050 M20 × 1.5 6H 125 25 16 12 15 4 374
VGOM2025015 VGOM2025050 M20 × 2.5 6H 140 32 16 12 15 4 376
VGOM2215015 VGOM2215050 M22 × 1.5 6H 125 25 18 14.5 17 4 374
VGOM2225015 VGOM2225050 M22 × 2.5 6H 140 32 18 14.5 17 4 376
VGOM2415015 VGOM2415050 M24 × 1.5 6H 140 27 18 14.5 17 4 374
VGOM2420015 VGOM2420050 M24 × 2.0 6H 140 27 18 14.5 17 4 374
VGOM2430015 VGOM2430050 M24 × 3.0 6H 160 34 18 14.5 17 4 376
C C0.25% C 25~45 45~55 50~60
~0.25% ~0.45% 0.45%~ HRC HRC HRC
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
402 KORLOY
VGTM
VGT DIN straight flute taps
DIN
371-376 HSSE
374


1.5P 5P
VGTM0305015 VGTM0305050 M3 × 0.5 6H 56 11 3.5 2.7 6 3 371
VGTM0407015 VGTM0407050 M4 × 0.7 6H 63 13 4.5 3.4 6 3 371
VGTM0508015 VGTM0508050 M5 × 0.8 6H 70 15 6 4.9 8 3 371
VGTM0610015 VGTM0610050 M6 × 1.0 6H 80 17 6 4.9 8 3 371
VGTM0810015 VGTM0810050 M8 × 1.0 6H 90 17 6 4.9 8 4 374
VGTM0812515 VGTM0812550 M8 × 1.25 6H 90 20 8 6.2 9 4 371
VGTM1010015 VGTM1010050 M10 × 1.0 6H 90 18 7 5.5 8 4 374
VGTM1012515 VGTM1012550 M10 × 1.25 6H 100 22 7 5.5 8 4 374
VGTM1015015 VGTM1015050 M10 × 1.5 6H 100 22 10 8 11 4 371
VGTM1210015 VGTM1210050 M12 × 1.0 6H 100 18 9 7 10 4 374
VGTM1212515 VGTM1212550 M12 × 1.25 6H 100 22 9 7 10 4 374
VGTM1215015 VGTM1215050 M12 × 1.5 6H 100 22 9 7 10 4 374
VGTM1217515 VGTM1217550 M12 × 1.75 6H 110 24 9 7 10 4 376
VGTM1415015 VGTM1415050 M14 × 1.5 6H 100 22 11 9 12 4 374
VGTM1420015 VGTM1420050 M14 × 2.0 6H 110 26 11 9 12 4 376
VGTM1615015 VGTM1615050 M16 × 1.5 6H 100 22 12 9 12 4 374
VGTM1620015 VGTM1620050 M16 × 2.0 6H 110 27 12 9 12 4 376
VGTM1815015 VGTM1815050 M18 × 1.5 6H 110 25 14 11 14 4 374
VGTM1825015 VGTM1825050 M18 × 2.5 6H 125 30 14 11 14 4 376
VGTM2015015 VGTM2015050 M20 × 1.5 6H 125 25 16 12 15 4 374
VGTM2025015 VGTM2025050 M20 × 2.5 6H 140 32 16 12 15 4 376
VGTM2215015 VGTM2215050 M22 × 1.5 6H 125 25 18 14.5 17 4 374
VGTM2225015 VGTM2225050 M22 × 2.5 6H 140 32 18 14.5 17 4 376
VGTM2415015 VGTM2415050 M24 × 1.5 6H 140 27 18 14.5 17 4 374
VGTM2420015 VGTM2420050 M24 × 2.0 6H 140 27 18 14.5 17 4 374
VGTM2430015 VGTM2430050 M24 × 3.0 6H 160 34 18 14.5 17 4 376
C C0.25% C 25~45 45~55 50~60
~0.25% ~0.45% 0.45%~ HRC HRC HRC
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
KORLOY
Y 403
Thread
TAP
VGCM
VGC DIN straight flute taps
DIN
371-376 HSSE
374

Designation
1.5P 5P
VGCM0305015 VGCM0305050 M3 × 0.5 6H 56 11 3.5 2.7 6 3 371
VGCM0407015 VGCM0407050 M4 × 0.7 6H 63 13 4.5 3.4 6 3 371
VGCM0508015 VGCM0508050 M5 × 0.8 6H 70 15 6 4.9 8 3 371
VGCM0610015 VGCM0610050 M6 × 1.0 6H 80 17 6 4.9 8 3 371
VGCM0810015 VGCM0810050 M8 × 1.0 6H 90 17 6 4.9 8 4 374
VGCM0812515 VGCM0812550 M8 × 1.25 6H 90 20 8 6.2 9 4 371
VGCM1010015 VGCM1010050 M10 × 1.0 6H 90 18 7 5.5 8 4 374
VGCM1012515 VGCM1012550 M10 × 1.25 6H 100 22 7 5.5 8 4 374
VGCM1015015 VGCM1015050 M10 × 1.5 6H 100 22 10 8 11 4 371
VGCM1210015 VGCM1210050 M12 × 1.0 6H 100 18 9 7 10 4 374
VGCM1212515 VGCM1212550 M12 × 1.25 6H 100 22 9 7 10 4 374
VGCM1215015 VGCM1215050 M12 × 1.5 6H 100 22 9 7 10 4 374
VGCM1217515 VGCM1217550 M12 × 1.75 6H 110 24 9 7 10 4 376
VGCM1415015 VGCM1415050 M14 × 1.5 6H 100 22 11 9 12 4 374
VGCM1420015 VGCM1420050 M14 × 2.0 6H 110 26 11 9 12 4 376
VGCM1615015 VGCM1615050 M16 × 1.5 6H 100 22 12 9 12 4 374
VGCM1620015 VGCM1620050 M16 × 2.0 6H 110 27 12 9 12 4 376
VGCM1815015 VGCM1815050 M18 × 1.5 6H 110 25 14 11 14 4 374
VGCM1825015 VGCM1825050 M18 × 2.5 6H 125 30 14 11 14 4 376
VGCM2015015 VGCM2015050 M20 × 1.5 6H 125 25 16 12 15 4 374
VGCM2025015 VGCM2025050 M20 × 2.5 6H 140 32 16 12 15 4 376
VGCM2215015 VGCM2215050 M22 × 1.5 6H 125 25 18 14.5 17 4 374
VGCM2225015 VGCM2225050 M22 × 2.5 6H 140 32 18 14.5 17 4 376
VGCM2415015 VGCM2415050 M24 × 1.5 6H 140 27 18 14.5 17 4 374
VGCM2420015 VGCM2420050 M24 × 2.0 6H 140 27 18 14.5 17 4 374
VGCM2430015 VGCM2430050 M24 × 3.0 6H 160 34 18 14.5 17 4 376
C C0.25% C 25~45 45~55 50~60
~0.25% ~0.45% 0.45%~ HRC HRC HRC
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
404 KORLOY
VGHM
VGH DIN straight flute taps
DIN
371-376 HSSE
374

Designation
1.5P 5P
VGHM0305015 VGHM0305050 M3 × 0.5 6H 56 11 3.5 2.7 6 3 371
VGHM0407015 VGHM0407050 M4 × 0.7 6H 63 13 4.5 3.4 6 3 371
VGHM0508015 VGHM0508050 M5 × 0.8 6H 70 15 6 4.9 8 3 371
VGHM0610015 VGHM0610050 M6 × 1.0 6H 80 17 6 4.9 8 3 371
VGHM0810015 VGHM0810050 M8 × 1.0 6H 90 17 6 4.9 8 4 374
VGHM0812515 VGHM0812550 M8 × 1.25 6H 90 20 8 6.2 9 4 371
VGHM1010015 VGHM1010050 M10 × 1.0 6H 90 18 7 5.5 8 4 374
VGHM1012515 VGHM1012550 M10 × 1.25 6H 100 22 7 5.5 8 4 374
VGHM1015015 VGHM1015050 M10 × 1.5 6H 100 22 10 8 11 4 371
VGHM1210015 VGHM1210050 M12 × 1.0 6H 100 18 9 7 10 4 374
VGHM1212515 VGHM1212550 M12 × 1.25 6H 100 22 9 7 10 4 374
VGHM1215015 VGHM1215050 M12 × 1.5 6H 100 22 9 7 10 4 374
VGHM1217515 VGHM1217550 M12 × 1.75 6H 110 24 9 7 10 4 376
VGHM1415015 VGHM1415050 M14 × 1.5 6H 100 22 11 9 12 4 374
VGHM1420015 VGHM1420050 M14 × 2.0 6H 110 26 11 9 12 4 376
VGHM1615015 VGHM1615050 M16 × 1.5 6H 100 22 12 9 12 4 374
VGHM1620015 VGHM1620050 M16 × 2.0 6H 110 27 12 9 12 4 376
VGHM1815015 VGHM1815050 M18 × 1.5 6H 110 25 14 11 14 4 374
VGHM1825015 VGHM1825050 M18 × 2.5 6H 125 30 14 11 14 4 376
VGHM2015015 VGHM2015050 M20 × 1.5 6H 125 25 16 12 15 4 374
VGHM2025015 VGHM2025050 M20 × 2.5 6H 140 32 16 12 15 4 376
VGHM2215015 VGHM2215050 M22 × 1.5 6H 125 25 18 14.5 17 4 374
VGHM2225015 VGHM2225050 M22 × 2.5 6H 140 32 18 14.5 17 4 376
VGHM2415015 VGHM2415050 M24 × 1.5 6H 140 27 18 14.5 17 4 374
VGHM2420015 VGHM2420050 M24 × 2.0 6H 140 27 18 14.5 17 4 374
VGHM2430015 VGHM2430050 M24 × 3.0 6H 160 34 18 14.5 17 4 376
C C0.25% C 25~45 45~55 50~60
~0.25% ~0.45% 0.45%~ HRC HRC HRC
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
KORLOY
Y 405
Thread
TAP
VMOM
VM DIN roll taps
DIN Un-
371-376 HSSE coated
374

Designation Oil
2P 4P groove
VMOM0305020S - M3 × 0.5 6HX 56 11 3.5 2.7 6 S
VMOM0305020M VMOM0305040M M3 × 0.5 6HX 56 11 3.5 2.7 6 M
VMOM0407020S - M4 × 0.7 6HX 63 13 4.5 3.4 6 S
VMOM0407020M VMOM0407040M M4 × 0.7 6HX 63 13 4.5 3.4 6 M
VMOM0508020S - M5 × 0.8 6HX 70 15 6 4.9 8 S
VMOM0508020M VMOM0508040M M5 × 0.8 6HX 70 15 6 4.9 8 M
VMOM0610020S - M6 × 1.0 6HX 80 17 6 4.9 8 S
VMOM0610020M VMOM0610040M M6 × 1.0 6HX 80 17 6 4.9 8 M
VMOM0810020S - M8 × 1.0 6HX 90 17 6 4.9 8 S
VMOM0810020M VMOM0810040M M8 × 1.0 6HX 90 17 6 4.9 8 M
VMOM0812520S - M8 × 1.25 6HX 90 20 8 6.2 9 S
VMOM0812520M VMOM0812540M M8 × 1.25 6HX 90 20 8 6.2 9 M
VMOM1010020S - M10 × 1.0 6HX 90 18 7 5.5 8 S
VMOM1010020M VMOM1010040M M10 × 1.0 6HX 90 18 7 5.5 8 M
VMOM1012520S - M10 × 1.25 6HX 100 22 7 5.5 8 S
VMOM1012520M VMOM1012540M M10 × 1.25 6HX 100 22 7 5.5 8 M
VMOM1015020S - M10 × 1.5 6HX 100 22 10 8 11 S
VMOM1015020M VMOM1015040M M10 × 1.5 6HX 100 22 10 8 11 M
VMOM1210020S - M12 × 1.0 6HX 100 18 9 7 10 S
- VMOM1210040M M12 × 1.0 6HX 100 18 9 7 10 M
VMOM1212520S - M12 × 1.25 6HX 100 22 9 7 10 S
VMOM1212520M VMOM1212540M M12 × 1.25 6HX 100 22 9 7 10 M
VMOM1215020S - M12 × 1.5 6HX 100 22 9 7 10 S
VMOM1215020M VMOM1215040M M12 × 1.5 6HX 100 22 9 7 10 M
VMOM1217520S - M12 × 1.75 6HX 110 24 9 7 10 S
VMOM1217520M VMOM1217540M M12 × 1.75 6HX 100 24 9 7 10 M
C C0.25% C 25~45 45~55 50~60
~0.25% ~0.45% 0.45%~ HRC HRC HRC
◎ ◎ ◎ ◎ ◎ ◎
406 KORLOY
VMTM
VM DIN roll taps
DIN
371-376 HSSE
374

Designation Oil
2P 4P groove
VMTM0305020S - M3 × 0.5 6HX 56 11 3.5 2.7 6 S
VMTM0305020M VMTM0305040M M3 × 0.5 6HX 56 11 3.5 2.7 6 M
VMTM0407020S - M4 × 0.7 6HX 63 13 4.5 3.4 6 S
VMTM0407020M VMTM0407040M M4 × 0.7 6HX 63 13 4.5 3.4 6 M
VMTM0508020S - M5 × 0.8 6HX 70 15 6 4.9 8 S
VMTM0508020M VMTM0508040M M5 × 0.8 6HX 70 15 6 4.9 8 M
VMTM0610020S - M6 × 1.0 6HX 80 17 6 4.9 8 S
VMTM0610020M VMTM0610040M M6 × 1.0 6HX 80 17 6 4.9 8 M
VMTM0810020S - M8 × 1.0 6HX 90 17 8 6.2 9 S
VMTM0810020M VMTM0810040M M8 × 1.0 6HX 90 17 8 6.2 9 M
VMTM0812520S - M8 × 1.25 6HX 90 20 8 6.2 9 S
VMTM0812520M VMTM0812540M M8 × 1.25 6HX 90 20 8 6.2 9 M
VMTM1010020S - M10 × 1.0 6HX 90 18 10 8 11 S
VMTM1010020M VMTM1010040M M10 × 1.0 6HX 90 18 10 8 11 M
VMTM1012520S - M10 × 1.25 6HX 100 22 10 8 11 S
VMTM1012520M VMTM1012540M M10 × 1.25 6HX 100 22 10 8 11 M
VMTM1015020S - M10 × 1.5 6HX 100 22 10 8 11 S
VMTM1015020M VMTM1015040M M10 × 1.5 6HX 100 22 10 8 11 M
VMTM1210020S - M12 × 1.0 6HX 100 18 9 7 10 S
- VMTM1210040M M12 × 1.0 6HX 100 18 9 7 10 M
VMTM1212520S - M12 × 1.25 6HX 100 22 9 7 10 S
VMTM1212520M VMTM1212540M M12 × 1.25 6HX 100 22 9 7 10 M
VMTM1215020S - M12 × 1.5 6HX 100 22 9 7 10 S
VMTM1215020M VMTM1215040M M12 × 1.5 6HX 100 22 9 7 10 M
VMTM1217520S - M12 × 1.75 6HX 110 24 9 7 10 S
VMTM1217520M VMTM1217540M M12 × 1.75 6HX 110 24 9 7 10 M
C C0.25% C 25~45 45~55 50~60
~0.25% ~0.45% 0.45%~ HRC HRC HRC
◎ ◎ ◎ ◎ ◎ ◎
KORLOY
Y 407
Thread
TAP
VMCM
VM DIN roll taps
DIN
371-376 HSSE
374

Designation Oil
2P 4P groove
VMCM0305020S - M3 × 0.5 6HX 56 11 3.5 2.7 6 S
VMCM0305020M VMCM0305040M M3 × 0.5 6HX 56 11 3.5 2.7 6 M
VMCM0407020S - M4 × 0.7 6HX 63 13 4.5 3.4 6 S
VMCM0407020M VMCM0407040M M4 × 0.7 6HX 63 13 4.5 3.4 6 M
VMCM0508020S - M5 × 0.8 6HX 70 15 6 4.9 8 S
VMCM0508020M VMCM0508040M M5 × 0.8 6HX 70 15 6 4.9 8 M
VMCM0610020S - M6 × 1.0 6HX 80 17 6 4.9 8 S
VMCM0610020M VMCM0610040M M6 × 1.0 6HX 80 17 6 4.9 8 M
VMCM0810020S - M8 × 1.0 6HX 90 17 8 6.2 9 S
VMCM0810020M VMCM0810040M M8 × 1.0 6HX 90 17 8 6.2 9 M
VMCM0812520S - M8 × 1.25 6HX 90 20 8 6.2 9 S
VMCM0812520M VMCM0812540M M8 × 1.25 6HX 90 20 8 6.2 9 M
VMCM1010020S - M10 × 1.0 6HX 90 18 10 8 11 S
VMCM1010020M VMCM1010040M M10 × 1.0 6HX 90 18 10 8 11 M
VMCM1012520S - M10 × 1.25 6HX 100 22 10 8 11 S
VMCM1012520M VMCM1012540M M10 × 1.25 6HX 100 22 10 8 11 M
VMCM1015020S - M10 × 1.5 6HX 100 22 10 8 11 S
VMCM1015020M VMCM1015040M M10 × 1.5 6HX 100 22 10 8 11 M
VMCM1210020S - M12 × 1.0 6HX 100 18 9 7 10 S
- VMCM1210040M M12 × 1.0 6HX 100 18 9 7 10 M
VMCM1212520S - M12 × 1.25 6HX 100 22 9 7 10 S
VMCM1212520M VMCM1212540M M12 × 1.25 6HX 100 22 9 7 10 M
VMCM1215020S - M12 × 1.5 6HX 100 22 9 7 10 S
VMCM1215020M VMCM1215040M M12 × 1.5 6HX 100 22 9 7 10 M
VMCM1217520S - M12 × 1.75 6HX 110 24 9 7 10 S
VMCM1217520M VMCM1217540M M12 × 1.75 6HX 110 24 9 7 10 M
C C0.25% C 25~45 45~55 50~60
~0.25% ~0.45% 0.45%~ HRC HRC HRC
◎ ◎ ◎ ◎ ◎ ◎
408 KORLOY
Recommended
Cutting Conditions
Endmill
Drill
Reamer
Chamfer
Thread
Solid Tools Solution _ Recommended cutting conditions

SFES4000 (Flat), SRES4000 (Radius)
Workpiece Ni based heat resistant super alloy
(Inconel718, 625)
Conditions
R.P.M Feed R.P.M Feed
Diameter (Ø) n (min -1) vf (mm/min) n (min -1) vf (mm/min)
3 3,800 220 2,500 125

4 3,000 240 1,900 135
5 2,450 245 1,500 145
6 2,100 250 1,250 145
8 1,600 225 945 155
10 1,250 215 760 145
12 1,050 210 630 145
16 765 210 475 110
20 635 200 380 110
Application tip
■Shouldering depth ■Slotting depth
•ap: ≤ 1.5D •ap: ≤ 0.2D
•ae: ≤ 0.05D
※ Notice
t Please adjust the recommended cutting conditions properly, according to the condition of your machines, the target shapes,
and your purpose for machining.
t Please set the machine with high rigidity and check the workpiece clamping.
t Please select proper coolant for workpiece materials and check the pressure and amount of coolant enough for machining.
t In case of chattering, reduce RPM and feed rate by the same ratio.
410 KORLOY
Recommended cutting conditions
Endmill Drill Reamer Chamfer Thread
Super Endmill For Ti/STS

SFET4000 (Flat), SRET4000 (Radius)
Workpiece Diameter
Brinell Specific 3 4 5 6 8 10 12 16 20
(mm)
hard- cutting ap ae
ISO Machining
Workpiece AISI ness force (mm) (mm) Cutting
ISO (DIN) (HB) (N/mm2)
materials length 8 10 15 15 20 25 30 42 48
(mm)
vc 100 108 114 114 114 114 114 114 114
Shouldering fz 0.020 0.030 0.040 0.050 0.065 0.070 0.080 0.085 0.100
1.5D 0.1D
rpm 10610 8594 7257 6048 4536 3629 3024 2268 1814
(C22) 1020 400 feed 849 1031 1161 1210 1179 1016 968 771 726
Carbon C40 1039 230 ~
steel 600 vc 64 65 68 70 70 70 70 70 70
C45 1045
Slotting fz 0.016 0.022 0.030 0.038 0.046 0.050 0.056 0.060 0.070
0.5D 1D
rpm 6791 5173 4329 3714 2785 2228 1857 1393 1114
feed 435 455 519 564 512 446 416 334 312
P
vc 141 138 151 151 151 151 151 151 151
Shouldering fz 0.021 0.032 0.049 0.069 0.067 0.075 0.078 0.095 0.090
1.5D 0.1D
rpm 15000 11000 9600 8000 6000 4800 4000 3000 2400
20NiCrMo2 8615
Alloy - 4320 800 feed 1250 1400 1900 2200 1600 1440 1250 1140 860
280 ~
steel - 4130 1000 vc 65 70 71 70 70 69 72 70 69
42CrMo4 4140 Slotting fz 0.015 0.022 0.035 0.050 0.060 0.060 0.070 0.070 0.080
0.5D 1D
rpm 6900 5600 4500 3700 2800 2200 1900 1400 1100
feed 410 490 630 740 670 530 530 390 350
vc 100 108 114 114 114 114 114 114 114
X6CrAl13 405 Shouldering fz 0.020 0.030 0.040 0.050 0.065 0.070 0.080 0.085 0.100
450 1.5D 0.1D
X6Cr17 430 rpm 10610 8594 7257 6048 4536 3629 3024 2268 1814
Ferritic/ X12CrS13 416 feed 849 1031 1161 1210 1179 1016 968 771 726
martensitic 240 540
X6CrMo17-1 434 vc 64 65 68 70 70 70 70 70 70
series
Slotting fz 0.016 0.022 0.030 0.038 0.046 0.050 0.056 0.060 0.070
(X6Cr13) 403 0.5D 1D
450
X12Cr13 410 rpm 6791 5173 4329 3714 2785 2228 1857 1393 1114
feed 435 455 519 564 512 446 416 334 312
M
vc 72 76 78 80 80 80 80 80 80
Shouldering fz 0.020 0.030 0.040 0.050 0.065 0.070 0.080 0.085 0.100
1.5D 0.1D
rpm 7639 6048 4966 4244 3183 2546 2122 1592 1273
X10CrNiS18-9 303 feed 611 726 795 849 828 713 679 541 509
Austenite X5CrNi18-9 304 200 520
series vc 45 46 48 50 50 50 50 50 50
X5CrNiMo17-12-2 316
Slotting fz 0.016 0.022 0.030 0.038 0.046 0.050 0.056 0.060 0.070
0.5D 1D
rpm 4775 3660 3056 2653 1990 1592 1326 955 796
feed 306 322 367 403 366 318 297 229 223
vc 70 74 75 76 78 78 78 78 78
Shouldering fz 0.018 0.027 0.035 0.043 0.054 0.064 0.073 0.080 0.092
1.5D 0.1D
rpm 7427 5889 4775 4032 3104 2483 2069 1552 1241
Ti6Al4V Ti6Al4V 600 feed 535 636 668 693 670 636 604 497 457
Ti/
S Ti5Al5V5Mo Ti5Al5V5Mo 320 ~
Ti Alloy 1800 vc 40 41 43 45 45 45 45 45 45
Ti7Al4Mo Ti7Al4Mo
Slotting fz 0.014 0.020 0.027 0.034 0.040 0.045 0.050 0.054 0.063
0.5D 1D
rpm 4244 3263 2737 2387 1790 1432 1194 895 716
feed 238 261 296 327 286 258 239 193 180
KORLOY 411
Super Endmill for Ti/STS

SBET2000 (Ball)
Workpiece Diameter
Brinell Specific 1 2 3 4 5 6 8 10 12
(mm)
hard- cutting ap ae
ISO Machining
materials length 1 2 3 8 12 12 16 20 25
(mm)
(C22) 1020 vc 130 130 123 200 200 200 200 200 200
Carbon 400
C40 1039 230 ~ ≤ 0.1D ≤ 0.1D fz 0.039 0.056 0.080 0.044 0.051 0.050 0.059 0.070 0.085
steel C45 1045 600 Copying
rpm 41600 20800 13000 16000 12700 10600 8000 6400 5300
P
20NiCrMo2 8615
Alloy - 4320 800
280 ~ ≤ 0.1D ≤ 0.1D feed 1625 1170 1040 1400 1300 1050 950 900 900
steel - 4130 1000
42CrMo4 4140
X6CrAl13 405 450 vc 120 120 113 180 180 180 180 180 180
X6Cr17 430
Ferritic/
X12CrS13 416 ≤ 0.1D ≤ 0.1D Copying fz 0.039 0.056 0.080 0.035 0.039 0.044 0.058 0.068 0.081
martensitic X6CrMo17-1 240 540
434 rpm 38400 19200 12000 14400 11520 9600 7200 5760 4800
series
(X6Cr13) 403
M X12Cr13 410 450 ≤ 0.1D ≤ 0.1D feed 3000 2160 1920 1008 897 845 835 783 778
vc 100 100 94 150 150 150 150 150 150
X10CrNiS18-9 303 Copying fz 0.039 0.056 0.080 0.035 0.039 0.044 0.058 0.068 0.081
Austenite X5CrNi18-9 304 200 520 ≤ 0.1D ≤ 0.1D
series X5CrNiMo17-12-2 316 rpm 32000 16000 10000 12000 9600 8000 6000 4800 4000
feed 2500 1800 1600 850 750 700 700 650 650
vc 100 100 94 150 150 150 150 150 150
Ti6Al4V Ti6Al4V 600 Copying fz 0.039 0.056 0.080 0.035 0.039 0.044 0.058 0.068 0.081
Ti/
S Ti5Al5V5Mo Ti5Al5V5Mo 320 ~ ≤ 0.1D ≤ 0.1D
Ti Alloy 1800 rpm 32000 16000 10000 12000 9600 8000 6000 4800 4000
Ti7Al4Mo Ti7Al4Mo
feed 2500 1800 1600 850 750 700 700 650 650
SBET4000 (Ball)
Workpiece Diameter
Brinell Specific 4 5 6 8 10 12
(mm)
hard- cutting ap ae
ISO Machining
materials length 8 12 12 16 20 25
(mm)
(C22) 1020 vc 200 200 200 200 200 200

Carbon 400
C40 1039 230 ~ ≤ 0.1D ≤ 0.1D fz 0.044 0.051 0.050 0.059 0.070 0.085
steel C45 1045 600 Copying rpm 16000 12700 10600 8000 6400 5300
P
20NiCrMo2 8615
Alloy - 4320 800
280 ~ ≤ 0.1D ≤ 0.1D feed 2800 2600 2100 1900 1800 1800
steel - 4130 1000
42CrMo4 4140
X6CrAl13 405 450 vc 180 180 180 180 180 180
X6Cr17 430
Ferritic/
X12CrS13 416 ≤ 0.1D ≤ 0.1D Copying fz 0.035 0.039 0.044 0.058 0.068 0.081
martensitic X6CrMo17-1 240 540
434 rpm 14400 11520 9600 7200 5760 4800
series
(X6Cr13) 403
M X12Cr13 410 450 ≤ 0.1D ≤ 0.1D feed 2040 1800 1680 1680 1560 1560
vc 150 150 150 150 150 150
X10CrNiS18-9 303 Copying fz 0.035 0.039 0.044 0.058 0.068 0.081
Austenite X5CrNi18-9 304 200 520 ≤ 0.1D ≤ 0.1D
series X5CrNiMo17-12-2 316 rpm 12000 9600 8000 6000 4800 4000
feed 1700 1500 1400 1400 1300 1300
vc 150 150 150 150 150 150
Ti6Al4V Ti6Al4V 600 Copying fz 0.035 0.039 0.044 0.058 0.068 0.081
Ti/
S Ti5Al5V5Mo Ti5Al5V5Mo 320 ~ ≤ 0.1D ≤ 0.1D
Ti Alloy 1800 rpm 12000 9600 8000 6000 4800 4000
Ti7Al4Mo Ti7Al4Mo
feed 1700 1500 1400 1400 1300 1300
412 KORLOY
H-Star Endmill
ESB702, ESB712 series
Hardened steels
Workpiece Heat resistant alloy Hardened steels
Conditions HRC30~40 HRC40~50 HRC50~55 HRC55~60 HRC60~65 HRC65~70
Diameter (Ø) R.P.M Feed R.P.M Feed R.P.M Feed R.P.M Feed R.P.M Feed R.P.M Feed
n (min -1) vf (mm/min) n (min -1) vf (mm/min) n (min -1) vf (mm/min) n (min -1) vf (mm/min) n (min -1) vf (mm/min) n (min -1) vf (mm/min)
~0.2 50,000 1,200 50,000 1,050 45,000 960 40,000 770 35,000 674 31,500 570
0.3 50,000 1,500 50,000 1,350 45,000 1,200 40,000 765 35,000 840 31,500 700
0.4 50,000 1,900 50,000 1,700 45,000 1,500 40,000 1,200 35,000 1,050 31,500 1,100
0.5 50,000 2,400 50,000 2,100 45,000 1,900 40,000 1,500 35,000 1,300 31,500 1,100
0.6 50,000 2,900 50,000 2,500 45,000 2,200 40,000 1,800 35,000 1,600 31,500 1,400
0.8 50,000 3,900 50,000 3,300 45,000 3,000 40,000 2,400 35,000 1,600 31,500 1,800
1 50,000 4,800 50,000 4,200 45,000 3,800 40,000 3,000 35,000 2,600 35,000 2,300
1.5 50,000 5,400 48,000 4,500 43,000 4,000 23,000 3,100 33,000 2,700 29,700 2,300
2 49,700 5,700 47,800 4,800 40,000 4,000 35,000 3,150 32,000 2,800 28,500 2,300
3 33,100 6,000 31,800 5,300 26,500 4,000 23,500 3,150 21,000 28,00 19,000 2,300
4 24,900 6,000 23,900 5,300 20,000 4,000 17,500 3,150 16,000 2,800 14,500 2,300
5 18.6 5,800 17,800 4,900 15,000 3,750 13,500 3,050 11,500 2,550 10,500 2,100
6 13,900 4,850 13,400 4,100 11,000 3,100 10,000 2,500 8,800 2,150 8,000 1,750
8 11,100 4,200 10,700 3,500 9,000 2,700 8,000 2,150 7,000 1,850 6,500 1,550
10 9,300 3,700 8,900 3,100 7,500 2,400 6,600 1,900 5,800 1,650 5,300 1,380
12 6,950 2,950 6,680 2,500 5,600 1,900 5,000 1,550 4,400 1,250 4,000 1,050
Application tip
ae
*ae : D1 ~ D4 = 0.05 × D ap : 0.02D

D5 ~ D8 = 0.025mm
D10 ~ D20 = 0.30mm
ESB703 series
Workpiece Hardened steels
D × R(mm) R.P.M Feed R.P.M Feed R.P.M Feed R.P.M Feed R.P.M Feed R.P.M Feed
2 57,000 7,100 55,000 6,000 46,000 5,000 40,300 3,900 36,800 3,500 32,800 2,900
2.5 57,000 7,100 55,000 6,000 46,000 5,000 40,300 3,900 36,800 3,500 32,800 2,900
3 38,000 7,500 36,600 6,600 30,500 5,000 27,000 3,900 24,200 3,500 21,900 2,900
4 28,500 7,500 27,500 6,600 23,000 5,000 20,100 3,900 18,400 3,500 16,700 2,900
5 21,500 7,300 20,500 6,100 17,300 4,700 15,500 3,800 13,200 3,200 12,100 2,600
6 16,000 6,100 15,400 5,100 12,700 3,900 11,500 3,100 10,100 2,700 9,200 2,200
8 12,700 5,300 12,300 4,400 10,400 3,400 9,200 2,700 8,100 2,300 7,500 1,900
10 10,700 4,600 10,200 3,900 8,600 3,000 7,600 2,400 6,700 2,100 6,100 1,700
12 8,000 3,700 7,700 3,100 6,400 2,400 5,800 1,900 5,100 1,600 4,600 1,300
Application tip
ae
*ae : D1 ~ D4 = 0.05 × D ap : 0.02D

D5 ~ D8 = 0.025mm
D10 ~ D20 = 0.30mm
KORLOY 413
H-Star Endmill
ESB734 series
2 62,100 8,600 59,800 7,200 50,000 6,000 43,800 4,700 40,000 4,200 35,600 3,500
2.5 62,100 8,600 59,800 7,200 50,000 6,000 43,800 4,700 40,000 4,200 35,600 3,500
3 41,400 9,000 39,800 8,000 33,100 6,000 29,400 4,700 26,300 4,200 23,800 3,500
4 31,100 9,000 29,900 8,000 25,000 6,000 21,900 4,700 20,000 4,200 18,100 3,500
5 23,300 8,700 22,300 7,400 18,800 5,600 16,900 4,600 14,400 3,800 13,100 3,200
6 17,400 7,300 16,800 6,200 13,800 4,700 12,500 3,800 11,000 3,200 10,000 2,600
8 13,900 6,300 13,400 5,300 11,300 4,100 10,000 3,200 8,800 2,800 8,100 2,300
10 11,600 5,600 11,100 4,700 9,400 3,600 8,300 2,900 7,300 2,500 6,600 2,100
Application tip
ae
*ae : D1 ~ D4 = 0.05 × D ap : 0.02D

D5 ~ D8 = 0.025mm
D10 ~ D20 = 0.30mm
ESE702 series Side cutting

Hardened steel
1 48,000 1,050 38,000 820 25,500 510 20,500 310 16,000 190 12,500 125
2 33,300 1,200 26,000 970 17,500 600 14,500 370 11,000 230 9,500 165
3 21,800 1,200 17,300 970 11,500 600 9,500 370 7,500 230 6,400 165
4 16,700 1,250 13,200 1,000 8,800 625 7,200 385 5,600 240 4,750 170
5 15,700 1,450 12,500 1,150 8,300 710 6,400 410 5,100 260 4,450 190
6 13,100 1,350 10,350 1,100 6,900 690 5,300 400 4,200 255 3,700 185
8 9,880 1,320 7,800 1,030 5,200 635 4,000 365 3,200 235 2,800 170
10 7,800 1,200 6,150 970 4,100 590 3,200 340 2,550 220 2,200 160
12 6,650 1,200 5,250 970 3,500 590 2,650 340 2,100 220 1,860 160
16 4,900 1,050 3,900 840 2,600 520 2,000 300 1,600 190 1,400 140
20 3,900 950 3,100 750 2,050 475 1,600 275 1,300 175 1,100 125
Application tip
ap : 1.0D
ae : 0.03D
414 KORLOY
ESE702 series Slotting

Hardened steel
~0.2 50,000 130 45,000 115 40,000 95 33,000 60 33,000 45 26,400 30

0.3 50,000 190 45,000 140 40,000 115 33,000 70 25,000 50 20,000 35
0.4 50,000 235 45,000 180 40,000 140 33,000 90 25,000 55 20,000 40
0.5 50,000 370 45,000 280 40,000 220 33,000 140 25,000 85 20,000 60
0.6 50,000 470 45,000 360 40,000 285 33,000 160 25,000 105 20,000 75
0.8 50,000 600 40,000 440 30,000 295 25,000 185 19,000 110 15,200 80
0.9 49,000 655 39,000 520 27,800 330 22,700 205 17,500 125 14,000 90
1 48,000 750 38,000 570 25,500 360 20,500 215 16,000 135 12,500 85
2 33,300 850 26,000 680 17,500 420 14,500 260 11,000 160 9,500 115
3 21,800 850 17,300 680 11,500 420 9,500 260 7,500 160 6,400 115
4 16,700 880 13,200 700 8,800 440 7,200 270 5,600 170 4,750 118
5 15,700 1,000 12,500 805 8,300 500 6,400 285 5,100 180 4,450 132
6 13,100 950 10,350 770 6,900 480 5,300 280 4,200 180 3,700 130
8 9,880 930 7,800 720 5,200 445 4,000 255 3,200 165 2,800 120
10 7,800 850 6,150 680 4,100 415 3,200 240 2,550 155 2,200 122
12 6,650 850 5,250 680 3,500 415 2,650 240 2,100 155 1,860 112
16 4,900 730 3,900 580 2,600 365 2,000 210 1,600 135 1,400 95
20 3,900 660 3,100 525 2,050 335 1,600 195 1,300 125 1,100 85
Application tip
ap : 0.05D ap : 0.02D
ESE704, ESE714, ESE744 series Side cutting

Hardened steel
1 48,000 1,480 38,000 1,050 25,500 710 20,500 430 16,000 270 12,500 175
2 33,300 1,750 26,000 1,250 17,500 840 14,500 520 11,000 320 9,500 230
3 21,800 1,750 17,300 1,250 11,500 840 9,500 520 7,500 320 6,400 230
4 16,700 1,800 13,200 1,300 8,800 880 7,200 540 5,600 335 4,750 240
5 15,700 2,000 12,500 1,500 8,300 1,000 6,400 580 5,100 370 4,450 270
6 13,100 1,950 10,350 1,400 6,900 950 5,300 560 4,200 350 3,700 260
8 9,880 1,880 7,800 1,350 5,200 900 4,000 520 3,200 330 2,800 240
10 7,800 1,750 6,150 1,260 4,100 840 3,200 480 2,550 310 2,200 220
12 6,650 1,750 5,250 1,260 3,500 840 2,650 480 2,100 300 1,860 220
16 4,900 1,500 3,900 1,100 2,600 730 2,000 420 1,600 270 1,400 200
20 3,900 1,300 3,100 970 2,050 650 1,600 380 1,300 250 1,100 180
Application tip
ap : 1.0D ap : 1.0D
ae : 0.05D ae : 0.03D
KORLOY 415
H-Star Endmill
ESE712 series Slotting
Hardened steel
0.2 50,000 130 45,000 115 40,000 95 33,000 60 33,000 45 26,400 30

0.3 50,000 190 45,000 140 40,000 115 33,000 70 25,000 50 20,000 35
0.4 50,000 235 45,000 180 40,000 140 33,000 90 25,000 55 20,000 40
0.5 50,000 370 45,000 280 40,000 220 33,000 140 25,000 85 20,000 60
0.6 50,000 470 45,000 360 40,000 285 30,000 160 25,000 105 20,000 75
0.8 50,000 600 40,000 440 30,000 295 25,000 185 19,000 110 15,200 80
0.9 49,000 655 39,000 520 27,800 330 22,700 205 17,500 125 14,000 90
1 48,000 750 38,000 570 25,500 360 20,500 215 16,000 135 12,500 85
2 33,300 850 26,000 680 17,500 420 14,500 260 11,000 160 9,500 115
3 21,800 850 17,300 680 11,500 420 9,500 260 7,500 160 6,400 115
4 16,700 880 13,200 700 8,800 440 7,200 270 5,600 170 4,750 118
5 15,700 1,000 12,500 805 8,300 500 6,400 285 5,100 180 4,450 132
6 13,100 950 10,350 770 6,900 480 5,300 280 4,200 180 3,700 130
8 9,880 930 7,800 720 5,200 445 4,000 255 3,200 165 2,800 120
10 7,800 850 6,150 680 4,100 415 3,200 240 2,550 155 2,200 112
12 6,650 850 5,250 680 3,500 415 2,650 240 2,100 155 1,860 112
16 4,900 730 3,900 580 2,600 365 2,000 210 1,600 135 1,400 95
20 3,900 660 3,100 525 2,050 335 1,600 195 1,300 125 1,100 85
Application tip
ap : 0.05D ap : 0.02D

Hardened steels
1 48,000 1,050 38,000 820 25,500 510 20,500 310 16,000 190 12,500 125
2 33,300 1,200 26,000 970 17,500 600 14,500 370 11,000 230 9,500 165
3 21,800 1,200 17,300 970 11,500 600 9,500 370 7,500 230 6,400 165
4 16,700 1,250 13,200 1,000 8,800 625 7,200 385 5,600 240 4,750 170
5 15,700 1,450 12,500 1,150 8,300 710 6,400 410 5,100 260 4,450 190
6 13,100 1,350 10,350 1,100 6,900 690 5,300 400 4,200 255 3,700 185
8 9,880 1,320 7,800 1,030 5,200 635 4,000 365 3,200 235 2,800 170
10 7,800 1,200 6,150 970 4,100 590 3,200 340 2,550 220 2,200 160
12 6,650 1,200 5,250 970 3,500 590 2,650 340 2,100 220 1,860 160
16 4,900 1,050 3,900 840 2,600 520 2,000 300 1,600 190 1,400 140
20 3,900 950 3,100 750 2,050 475 1,600 275 1,300 175 1,100 125
Application tip
ap : 1.0D
ae : 0.03D
416 KORLOY

Hardened steels
6 24,800 5,350 23,500 4,900 16,000 4,900 13,500 3,300 10,500 2,100 8,000 1,450
8 20,000 5,500 19,000 5,000 12,000 4,600 10,000 3,100 8,000 2,000 6,000 1,400
10 16,000 4,900 15,500 4,500 9,500 4,100 8,000 2,900 6,400 1,800 4,800 1,300
12 13,000 4,500 12,500 4,100 8,000 3,800 6,600 2,500 5,300 1,600 4,000 1,150
16 10,000 4,000 9,700 3,700 6,000 3,400 5,000 2,300 4,000 1,250 3,000 870
20 8,000 3,350 7,800 3,400 4,800 3,200 4,000 2,100 3,200 1,020 2,400 690
Application tip
ap : 1.0D ap : 1.0D
ae : 0.05D ae : 0.03D

Hardened steels
1 48,000 1,480 38,000 1,050 25,500 710 20,500 430 16,000 270 12,500 175
2 33,300 1,750 26,000 1,250 17,500 840 14,500 520 11,000 320 9,500 230
3 21,800 1,750 17,300 1,250 11,500 840 9,500 520 7,500 320 6,400 230
4 16,700 1,800 13,200 1,300 8,800 880 7,200 540 5,600 335 4,750 240
5 15,700 2,000 12,500 1,500 8,300 1,000 6,400 580 5,100 370 4,450 270
6 13,100 1,950 10,350 1,400 6,900 950 5,300 560 4,200 350 3,700 260
8 9,880 1,880 7,800 1,350 5,200 900 4,000 520 3,200 330 2,800 240
10 7,800 1,750 6,150 1,260 4,100 840 3,200 480 2,550 310 2,200 220
12 6,650 1,750 5,250 1,260 3,500 840 2,650 480 2,100 300 1,860 220
16 4,900 1,500 3,900 1,100 2,600 730 2,000 420 1,600 270 1,400 200
20 3,900 1,300 3,100 970 2,050 650 1,600 380 1,300 250 1,100 180
Application tip
ap : 1.0D ap : 1.0D
ae : 0.05D ae : 0.03D
KORLOY 417
H-Star Endmill
ESE726, ESR736 series
Hardened steels
6 24,800 5,350 23,500 4,900 16,000 4,900 13,500 3,300 10,500 2,100 8,000 1,450
8 20,000 5,500 19,000 5,000 12,000 4,600 10,000 3,100 8,000 2,000 6,000 1,400
10 16,000 4,900 15,500 4,500 9,500 4,100 8,000 2,900 6,400 1,800 4,800 1,300
12 13,000 4,500 12,500 4,100 8,000 3,800 6,600 2,500 5,300 1,600 4,000 1,150
16 10,000 4,000 9,700 3,700 6,000 3,400 5,000 2,300 4,000 1,250 3,000 870
20 8,000 3,350 7,800 3,400 4,800 3,200 4,000 2,100 3,200 1,020 2,400 690
Application tip
ap : 1.0D ap : 1.0D
ae : 0.05D ae : 0.03D
ESR702 series Side cutting

Hardened steels
2 33,300 960 26,000 776 17,500 480 14,500 296 11,000 184 9,500 132
3 21,800 960 17,300 776 11,500 480 9,500 296 7,500 184 6,400 132
4 16,700 1,000 13,200 800 8,800 500 7,200 308 5,600 192 4,750 136
5 15,700 1,160 12,500 920 8,300 568 6,400 328 5,100 208 4,450 152
6 13,100 1,080 10,350 880 6,900 552 5,300 320 4,200 204 3,700 148
8 9,880 1,056 7,800 824 5,200 508 4,000 292 3,200 188 2,800 136
10 7,800 960 6,150 776 4,100 472 3,200 272 2,550 176 2,200 128
12 6,650 960 5,250 776 3,500 472 2,650 272 2,100 176 1,860 128
16 4,900 840 3,900 672 2,600 416 2,000 240 1,600 152 1,400 112
20 3,900 760 3,100 600 2,050 380 1,600 220 1,300 140 1,100 100
Application tip
ap : 1.0D
ae : 0.03D
418 KORLOY
ESR702, ESR732 series Slotting

Hardened steels
2 33,300 680 26,000 544 17,500 336 14,500 208 11,000 128 9,500 92
3 21,800 680 17,300 544 11,500 336 9,500 208 7,500 128 6,400 92
4 16,700 704 13,200 560 8,800 352 7,200 216 5,600 136 4,750 94
5 15,700 800 12,500 644 8,300 400 6,400 228 5,100 144 4,450 106
6 13,100 760 10,350 616 6,900 384 5,300 224 4,200 144 3,700 104
8 9,880 744 7,800 576 5,200 356 4,000 204 3,200 132 2,800 96
10 7,800 680 6,150 544 4,100 332 3,200 192 2,550 124 2,200 90
12 6,650 680 5,250 544 3,500 332 2,650 192 2,100 124 1,860 90
16 4,900 584 3,900 464 2,600 292 2,000 168 1,600 108 1,400 78
20 3,900 528 3,100 420 2,050 268 1,600 168 1,300 100 1,100 70
Application tip
ap : 0.05D ap : 0.02D
ESR724, ESR714, ESR734, ESR704 series Side cutting

Hardened steels
3 21,800 1,400 17,300 1,000 11,500 672 9,500 416 7,500 256 6,400 184
4 16,700 1,440 13,200 1,040 8,800 704 7,200 432 5,600 268 4,750 192
5 15,700 1,600 12,500 1,200 8,300 800 6,400 464 5,100 296 4,450 216
6 13,100 1,560 10,350 1,120 6,900 760 5,300 448 4,200 280 3,700 208
8 9,880 1,504 7,800 1,080 5,200 720 4,000 416 3,200 264 2,800 192
10 7,800 1,400 6,150 1,008 4,100 672 3,200 384 2,550 248 2,200 176
12 6,650 1,400 5,250 1,008 3,500 672 2,650 384 2,100 240 1,860 176
16 4,900 1,200 3,900 880 2,600 584 2,000 336 1,600 216 1,400 160
20 3,900 1,040 3,100 776 2,050 520 1,600 304 1,300 200 1,100 144
Application tip
ap : 1.0D
ae : 0.03D
KORLOY 419
H-Star Endmill
ESR706 series
Hardened steels
6 24,800 5,350 23,500 4,900 16,000 4,900 13,500 3,300 10,500 2,100 8,000 1,450
8 20,000 5,500 19,000 5,000 12,000 4,600 10,000 3,100 8,000 2,000 6,000 1,400
10 16,000 4,900 15,500 4,500 9,500 4,100 8,000 2,900 6,400 1,800 4,800 1,300
12 13,000 4,500 12,500 4,100 8,000 3,800 6,600 2,500 5,300 1,600 4,000 1,150
16 10,000 4,000 9,700 3,700 6,000 3,400 5,000 2,300 4,000 1,250 3,000 870
20 8,000 3,350 7,800 3,400 4,800 3,200 4,000 2,100 3,200 1,020 2,400 690
Application tip
ap : 1.0D ap : 1.0D
ae : 0.05D ae : 0.03D
420 KORLOY
ESRB712
Alloy steels, Carbon steels Pre-hardened steels Hardened steels
Workpiece
(SCM, SNCM, S45C) (NAK, CENA, KP4) (SKD, SKT, STAVAX)
Strength ~HRC35 HRC35~45 HRC45~55
Conditions ~1100N/mm2 1100~1500N/mm2 1500~2000N/mm2
R.P.M Feed ap R.P.M Feed ap R.P.M Feed ap
Diameter (Ø) Effective Length n (min -1) vf (mm/min) n (min -1) vf (mm/min) n (min -1) vf (mm/min)
(mm) (mm) (mm)
0.1 0.3 50,000 240 0.009 50,000 215 0.007 50,000 190 0.005
0.1 0.5 50,000 240 0.006 50,000 215 0.005 50,000 190 0.004
0.1 1 45,000 195 0.002 45,000 175 0.002 45,000 155 0.001
0.2 0.5 50,000 335 0.018 50,000 310 0.014 43,200 260 0.010
0.2 1 50,000 335 0.013 50,000 310 0.010 43,200 260 0.007
0.2 1.5 45,000 270 0.007 45,000 250 0.006 38,880 210 0.004
0.2 2 45,000 270 0.005 45,000 250 0.004 38,880 210 0.003
0.2 3 45,000 270 0.003 45,000 250 0.003 38,880 210 0.002
0.3 1 50,000 475 0.019 50,000 430 0.015 42,800 365 0.011
0.3 1.5 50,000 475 0.019 50,000 430 0.015 42,800 365 0.011
0.3 2 45,000 385 0.011 45,000 350 0.008 38,520 295 0.006
0.3 2.5 45,000 385 0.007 45,000 350 0.005 38,520 295 0.004
0.3 3 45,000 385 0.007 45,000 350 0.005 38,520 295 0.004
0.3 4 40,000 305 0.004 40,000 275 0.003 34,240 235 0.002
0.3 5 30,000 200 0.003 30,000 180 0.002 25,680 155 0.002
0.4 1 41,000 490 0.036 38,800 425 0.028 34,200 340 0.020
0.4 1.5 41,000 490 0.025 38,800 425 0.020 34,200 340 0.014
0.4 2 41,000 490 0.025 38,800 425 0.020 34,200 340 0.014
0.4 2.5 36,900 395 0.014 34,920 345 0.011 30,780 275 0.008
0.4 3 36,900 395 0.014 34,920 345 0.011 30,780 275 0.008
0.4 4 36,900 395 0.009 34,920 345 0.007 30,780 275 0.005
0.4 5 32,800 315 0.009 31,040 270 0.007 27,360 220 0.005
0.4 6 32,800 315 0.005 31,040 270 0.004 27,360 220 0.003
0.4 8 24,600 205 0.004 23,280 180 0.003 20,520 145 0.002
0.4 10 12,300 90 0.004 11,640 75 0.003 10,260 60 0.002
0.5 1 34,200 685 0.045 32,300 580 0.035 28,500 515 0.025
0.5 1.5 34,200 685 0.045 32,300 580 0.035 28,500 515 0.025
0.5 2 34,200 685 0.032 32,300 580 0.025 28,500 515 0.018
0.5 2.5 34,200 685 0.032 32,300 580 0.025 28,500 515 0.018
0.5 3 30,780 555 0.018 29,070 470 0.014 25,650 415 0.010
0.5 4 30,780 555 0.018 29,070 470 0.014 25,650 415 0.010
0.5 5 30,780 555 0.011 29,070 470 0.009 25,650 415 0.006
0.5 6 27,360 440 0.011 25,840 370 0.009 22,800 330 0.006
0.5 8 20,520 290 0.007 19,380 245 0.005 17,100 215 0.004
0.5 10 20,520 290 0.005 19,380 245 0.004 17,100 215 0.003
0.5 12 10,260 125 0.005 9,690 105 0.004 8,550 95 0.003
0.5 14 10,260 125 0.005 9,690 105 0.004 8,550 95 0.003
0.5 16 3,420 35 0.005 3,230 30 0.004 2,850 25 0.003
0.6 1 34,200 1,025 0.038 32,300 840 0.029 28,500 685 0.021
0.6 2 34,200 1,025 0.038 32,300 840 0.029 28,500 685 0.021
0.6 3 34,200 1,025 0.038 32,300 840 0.029 28,500 685 0.021
0.6 4 30,780 830 0.022 29,070 680 0.017 25,650 555 0.012
0.6 5 30,780 830 0.014 29,070 680 0.011 25,650 555 0.008
0.6 6 30,780 830 0.014 29,070 680 0.011 25,650 555 0.008
KORLOY
Y 421
H-Star Endmill
ESRB712
Workpiece
(mm) (mm) (mm)
0.6 8 27,360 655 0.008 25,840 540 0.006 22,800 440 0.005
0.6 10 20,520 430 0.005 19,380 355 0.004 17,100 290 0.003
0.6 12 20,520 430 0.005 19,380 355 0.004 17,100 290 0.003
0.6 14 10,260 185 0.005 9,690 150 0.004 8,550 125 0.003
0.6 16 10,260 185 0.005 9,690 150 0.004 8,550 125 0.003
0.7 2 34,200 1,130 0.063 32,300 930 0.049 28,500 765 0.035
0.7 4 30,780 915 0.025 29,070 755 0.020 25,650 620 0.014
0.7 6 30,780 915 0.016 29,070 755 0.012 25,650 620 0.009
0.7 8 27,360 725 0.016 25,840 595 0.012 22,800 490 0.009
0.7 10 27,360 725 0.009 25,840 595 0.007 22,800 490 0.005
0.7 12 20,520 475 0.006 19,380 390 0.005 17,100 320 0.004
0.8 2 34,200 1,230 0.072 32,300 1,035 0.056 28,500 855 0.040
0.8 3 34,200 1,230 0.050 32,300 1,035 0.039 28,500 855 0.028
0.8 4 34,200 1,230 0.050 32,300 1,035 0.039 28,500 855 0.028
0.8 5 30,780 995 0.029 29,070 840 0.022 25,650 695 0.016
0.8 6 30,780 995 0.029 29,070 840 0.022 25,650 695 0.016
0.8 8 30,780 995 0.018 29,070 840 0.014 25,650 695 0.010
0.8 10 27,360 785 0.018 25,840 660 0.014 22,800 545 0.010
0.8 12 27,360 785 0.011 25,840 660 0.008 22,800 545 0.006
0.8 14 20,520 515 0.007 19,380 435 0.006 17,100 360 0.004
0.8 16 20,520 515 0.007 19,380 435 0.006 17,100 360 0.004
0.8 20 10,260 220 0.007 9,690 185 0.006 8,550 155 0.004
0.9 4 29,250 1,120 0.032 27,630 935 0.025 24,390 775 0.018
0.9 6 29,250 1,120 0.032 27,630 935 0.025 24,390 775 0.018
0.9 8 29,250 1,120 0.020 27,630 935 0.016 24,390 775 0.011
0.9 10 26,000 885 0.020 24,560 740 0.016 21,680 610 0.011
1.0 2 30,800 1,540 0.090 29,100 1,310 0.070 25,700 1,075 0.050
1.0 3 30,800 1,540 0.090 29,100 1,310 0.070 25,700 1,075 0.050
1.0 4 30,800 1,540 0.063 29,100 1,310 0.049 25,700 1,075 0.035
1.0 5 30,800 1,540 0.063 29,100 1,310 0.049 25,700 1,075 0.035
1.0 6 27,720 1,245 0.036 26,190 1,060 0.028 23,130 870 0.020
1.0 7 27,720 1,245 0.036 26,190 1,060 0.028 23,130 870 0.020
1.0 8 27,720 1,245 0.036 26,190 1,060 0.028 23,130 870 0.020
1.0 10 27,720 1,245 0.023 26,190 1,060 0.018 23,130 870 0.013
1.0 12 24,640 985 0.023 23,280 840 0.018 20,560 690 0.013
1.0 14 24,640 985 0.014 23,280 840 0.011 20,560 690 0.008
1.0 16 18,480 645 0.014 17,460 550 0.011 15,420 450 0.008
1.0 18 18,480 645 0.009 17,460 550 0.007 15,420 450 0.005
1.0 20 18,480 645 0.009 17,460 550 0.007 15,420 450 0.005
1.0 22 9,240 275 0.009 8,730 235 0.007 7,710 195 0.005
1.0 26 9,240 275 0.009 8,730 235 0.007 7,710 195 0.005
1.0 30 9,240 275 0.009 8,730 235 0.007 7,710 195 0.005
1.0 40 3,080 75 0.009 2,910 65 0.007 2,570 55 0.005
1.0 50 3,080 75 0.006 2,910 65 0.005 2,570 55 0.003
422 KORLOY
ESRB712
Workpiece
(mm) (mm) (mm)
1.2 4 26,300 1,375 0.076 24,800 1,150 0.059 21,900 950 0.042
1.2 6 26,300 1,375 0.076 24,800 1,150 0.059 21,900 950 0.042
1.2 8 23,670 1,115 0.043 22,320 930 0.034 19,710 770 0.024
1.2 10 23,670 1,115 0.027 22,320 930 0.021 19,710 770 0.015
1.2 12 23,670 1,115 0.027 22,320 930 0.021 19,710 770 0.015
1.2 16 21,040 880 0.016 19,840 735 0.013 17,520 610 0.009
1.2 20 15,780 580 0.011 14,880 485 0.008 13,140 400 0.006
1.2 26 7,890 245 0.011 7,440 205 0.008 6,570 170 0.006
1.4 6 21,500 1,295 0.088 20,300 1,100 0.069 18,000 935 0.049
1.4 8 19,350 1,050 0.050 18,270 890 0.039 16,200 755 0.028
1.4 10 19,350 1,050 0.050 18,270 890 0.039 16,200 755 0.028
1.4 16 17,200 830 0.032 16,240 705 0.025 14,400 600 0.018
1.5 4 23,900 1,580 0.135 22,600 1,355 0.105 20,000 1,075 0.075
1.5 5 23,900 1,580 0.095 22,600 1,355 0.074 20,000 1,075 0.053
1.5 6 23,900 1,580 0.095 22,600 1,355 0.074 20,000 1,075 0.053
1.5 7 23,900 1,580 0.095 22,600 1,355 0.074 20,000 1,075 0.053
1.5 8 21,510 1,280 0.054 20,340 1,100 0.042 18,000 870 0.030
1.5 10 21,510 1,280 0.054 20,340 1,100 0.042 18,000 870 0.030
1.5 12 21,510 1,280 0.054 20,340 1,100 0.042 18,000 870 0.030
1.5 14 21,510 1,280 0.034 20,340 1,100 0.026 18,000 870 0.019
1.5 16 19,120 1,010 0.034 18,080 865 0.026 16,000 690 0.019
1.5 18 19,120 1,010 0.034 18,080 865 0.026 16,000 690 0.019
1.5 20 19,120 1,010 0.020 18,080 865 0.016 16,000 690 0.011
1.5 22 19,120 1,010 0.020 18,080 865 0.016 16,000 690 0.011
1.5 26 14,340 665 0.014 13,560 570 0.011 12,000 450 0.008
1.5 30 14,340 665 0.014 13,560 570 0.011 12,000 450 0.008
1.5 35 7,170 285 0.010 6,780 245 0.008 6,000 195 0.005
1.5 40 7,170 285 0.010 6,780 245 0.008 6,000 195 0.005
1.6 4 22,200 1,555 0.101 21,000 1,300 0.078 18,500 1,110 0.056
1.6 6 22,200 1,555 0.101 21,000 1,300 0.078 18,500 1,110 0.056
1.6 8 22,200 1,555 0.101 21,000 1,300 0.078 18,500 1,110 0.056
1.6 10 19,980 1,260 0.058 18,900 1,055 0.045 16,650 900 0.032
1.6 12 19,980 1,260 0.058 18,900 1,055 0.045 16,650 900 0.032
1.6 16 19,980 1,260 0.036 18,900 1,055 0.028 16,650 900 0.020
1.6 20 17,760 995 0.036 16,800 830 0.028 14,800 710 0.020
1.8 4 22,200 1,780 0.113 21,000 1,470 0.088 18,500 1,225 0.063
1.8 6 22,200 1,780 0.113 21,000 1,470 0.088 18,500 1,225 0.063
1.8 8 22,200 1,780 0.113 21,000 1,470 0.088 18,500 1,225 0.063
1.8 10 19,980 1,440 0.065 18,900 1,190 0.050 16,650 990 0.036
1.8 12 19,980 1,440 0.065 18,900 1,190 0.050 16,650 990 0.036
1.8 16 19,980 1,440 0.041 18,900 1,190 0.032 16,650 990 0.023
1.8 20 17,760 1,140 0.041 16,800 940 0.032 14,800 785 0.023
2.0 6 18,000 1,795 0.180 17,000 1,525 0.140 15,000 1,285 0.100
2.0 8 18,000 1,795 0.126 17,000 1,525 0.098 15,000 1,285 0.070
KORLOY
Y 423
H-Star Endmill
ESRB712
Workpiece
(mm) (mm) (mm)
2.0 10 18,000 1,795 0.126 17,000 1,525 0.098 15,000 1,285 0.070
2.0 12 16,200 1,455 0.072 15,300 1,235 0.056 13,500 1,040 0.040
2.0 14 16,200 1,455 0.072 15,300 1,235 0.056 13,500 1,040 0.040
2.0 16 16,200 1,455 0.072 15,300 1,235 0.056 13,500 1,040 0.040
2.0 18 16,200 1,455 0.045 15,300 1,235 0.035 13,500 1,040 0.025
2.0 20 16,200 1,455 0.045 15,300 1,235 0.035 13,500 1,040 0.025
2.0 22 14,400 1,150 0.045 13,600 975 0.035 12,000 820 0.025
2.0 26 14,400 1,150 0.045 13,600 975 0.035 12,000 820 0.025
2.0 30 14,400 1,150 0.027 13,600 975 0.021 12,000 820 0.015
2.0 35 10,800 755 0.018 10,200 640 0.014 9,000 540 0.010
2.0 40 10,800 755 0.018 10,200 640 0.014 9,000 540 0.010
2.0 45 5,400 325 0.018 5,100 275 0.014 4,500 230 0.010
2.0 50 5,400 325 0.018 5,100 275 0.014 4,500 230 0.010
2.0 60 5,400 325 0.018 5,100 275 0.014 4,500 230 0.010
2.5 8 15,800 1,925 0.158 14,900 1,605 0.123 13,200 1,305 0.088
2.5 10 15,800 1,925 0.158 14,900 1,605 0.123 13,200 1,305 0.088
2.5 12 15,800 1,925 0.158 14,900 1,605 0.123 13,200 1,305 0.088
2.5 16 14,220 1,560 0.090 13,410 1,300 0.070 11,880 1,055 0.050
2.5 20 14,220 1,560 0.090 13,410 1,300 0.070 11,880 1,055 0.050
2.5 22 14,220 1,560 0.056 13,410 1,300 0.044 11,880 1,055 0.031
2.5 26 12,640 1,230 0.056 11,920 1,025 0.044 10,560 835 0.031
2.5 30 12,640 1,230 0.056 11,920 1,025 0.044 10,560 835 0.031
2.5 35 12,640 1,230 0.034 11,920 1,025 0.026 10,560 835 0.019
2.5 40 9,480 810 0.034 8,940 675 0.026 7,920 550 0.019
2.5 45 9,480 810 0.023 8,940 675 0.018 7,920 550 0.013
2.5 50 9,480 810 0.023 8,940 675 0.018 7,920 550 0.013
3.0 6 13,700 2,050 0.270 12,900 1,730 0.210 11,400 1,435 0.150
3.0 8 13,700 2,050 0.270 12,900 1,730 0.210 11,400 1,435 0.150
3.0 10 13,700 2,050 0.189 12,900 1,730 0.147 11,400 1,435 0.105
3.0 12 13,700 2,050 0.189 12,900 1,730 0.147 11,400 1,435 0.105
3.0 14 13,700 2,050 0.189 12,900 1,730 0.147 11,400 1,435 0.105
3.0 16 12,330 1,660 0.108 11,610 1,400 0.084 10,260 1,160 0.06
3.0 18 12,330 1,660 0.108 11,610 1,400 0.084 10,260 1,160 0.06
3.0 20 12,330 1,660 0.108 11,610 1,400 0.084 10,260 1,160 0.06
3.0 22 12,330 1,660 0.108 11,610 1,400 0.084 10,260 1,160 0.06
3.0 26 12,330 1,660 0.068 11,610 1,400 0.053 10,260 1,160 0.038
3.0 30 12,330 1,660 0.068 11,610 1,400 0.053 10,260 1,160 0.038
3.0 35 10,960 1,310 0.068 10,320 1,105 0.053 9,120 920 0.038
3.0 40 10,960 1,310 0.041 10,320 1,105 0.032 9,120 920 0.023
3.0 45 10,960 1,310 0.041 10,320 1,105 0.032 9,120 920 0.023
3.0 50 8,220 860 0.027 7,740 725 0.021 6,840 605 0.015
3.0 60 8,220 860 0.027 7,740 725 0.021 6,840 605 0.015
4.0 8 9,800 1,965 0.360 9,300 1,670 0.280 8,200 1,395 0.200
4.0 10 9,800 1,965 0.360 9,300 1,670 0.280 8,200 1,395 0.200
424 KORLOY
ESRB712
Workpiece
(mm) (mm) (mm)
4.0 12 9,800 1,965 0.360 9,300 1,670 0.280 8,200 1,395 0.200
4.0 14 9,800 1,965 0.252 9,300 1,670 0.196 8,200 1,395 0.140
4.0 16 9,800 1,965 0.252 9,300 1,670 0.196 8,200 1,395 0.140
4.0 18 9,800 1,965 0.252 9,300 1,670 0.196 8,200 1,395 0.140
4.0 20 9,800 1,965 0.252 9,300 1,670 0.196 8,200 1,395 0.140
4.0 22 8,820 1,590 0.144 8,370 1,355 0.112 7,380 1,130 0.080
4.0 26 8,820 1,590 0.144 8,370 1,355 0.112 7,380 1,130 0.080
4.0 30 8,820 1,590 0.144 8,370 1,355 0.112 7,380 1,130 0.080
4.0 35 8,820 1,590 0.090 8,370 1,355 0.070 7,380 1,130 0.050
4.0 40 8,820 1,590 0.090 8,370 1,355 0.070 7,380 1,130 0.050
4.0 45 7,840 1,260 0.090 7,440 1,070 0.070 6,560 895 0.050
4.0 50 7,840 1,260 0.090 7,440 1,070 0.070 6,560 895 0.050
4.0 60 7,840 1,260 0.054 7,440 1,070 0.042 6,560 895 0.030
5.0 15 7,700 1,845 0.315 7,300 1,455 0.245 6,400 1,285 0.175
5.0 20 7,700 1,845 0.315 7,300 1,455 0.245 6,400 1,285 0.175
5.0 26 6,930 1,495 0.180 6,570 1,180 0.140 5,760 1,040 0.100
5.0 30 6,930 1,495 0.180 6,570 1,180 0.140 5,760 1,040 0.100
5.0 35 6,930 1,495 0.180 6,570 1,180 0.140 5,760 1,040 0.100
5.0 40 6,930 1,495 0.180 6,570 1,180 0.140 5,760 1,040 0.100
5.0 50 6,930 1,495 0.113 6,570 1,180 0.088 5,760 1,040 0.063
5.0 60 6,160 1,180 0.113 5,840 930 0.088 5,120 820 0.063
6.0 20 6,500 1,900 0.378 6,200 1,600 0.294 5,500 1,330 0.210
6.0 30 6,500 1,900 0.378 6,200 1,600 0.294 5,500 1,330 0.210
8.0 25 4,850 1,800 0.504 4,600 1,500 0.392 4,000 1,280 0.280
8.0 30 4,850 1,800 0.504 4,600 1,500 0.392 4,000 1,280 0.280
10.0 30 3,850 1,650 0.900 3,680 1,400 0.700 3,200 1,200 0.500
10.0 40 3,850 1,650 0.630 3,680 1,400 0.490 3,200 1,200 0.350
12.0 32 3,200 1,520 1.080 3,050 1,300 0.840 2,650 1,100 0.600
12.0 45 3,200 1,520 0.756 3,050 1,300 0.588 2,650 1,100 0.420
Application tip
ae
*ae : D1 ~ D4 = 0.05 × D ap
D5 ~ D8 = 0.025mm
D10 ~ D20 = 0.30mm
KORLOY
Y 425
H-Star Endmill
ESRE712 Side cutting
Workpiece
(mm) (mm) (mm)
0.1 0.3 50,000 315 0.009 46,200 230 0.007 40,600 170 0.005
0.1 0.5 50,000 315 0.006 46,200 230 0.005 40,600 170 0.004
0.1 1 45,000 255 0.002 41,580 185 0.002 36,540 140 0.001
0.2 0.5 38,500 380 0.018 36,300 270 0.014 32,100 200 0.010
0.2 1 38,500 380 0.013 36,300 270 0.010 32,100 200 0.007
0.2 1.5 34,650 310 0.007 32,670 220 0.006 28,890 160 0.004
0.2 2 34,650 310 0.005 32,670 220 0.004 28,890 160 0.003
0.3 1 34,200 390 0.019 32,300 270 0.015 28,500 230 0.011
0.3 1.5 34,200 390 0.019 32,300 270 0.015 25,800 230 0.011
0.3 2 30,780 315 0.011 29,070 220 0.008 25,650 185 0.006
0.3 2.5 30,780 315 0.007 29,070 220 0.005 25,650 185 0.004
0.3 3 30,780 315 0.007 29,070 220 0.005 25,650 185 0.004
0.3 4 27,360 250 0.004 25,840 175 0.003 22,800 145 0.002
0.3 5 20,520 165 0.003 19,380 115 0.002 17,100 95 0.002
0.4 1 27,400 540 0.036 25,800 380 0.028 22,800 280 0.020
0.4 1.5 27,400 540 0.025 25,800 380 0.020 22,800 280 0.014
0.4 2 27,400 540 0.025 25,800 380 0.020 22,800 280 0.014
0.4 2.5 24,660 435 0.014 23,220 310 0.011 20,520 225 0.008
0.4 3 24,660 435 0.014 23,220 310 0.011 20,520 225 0.008
0.4 4 24,660 435 0.009 23,220 310 0.007 20,520 225 0.005
0.4 5 21,920 345 0.009 20,640 245 0.007 18,240 180 0.005
0.4 6 21,920 345 0.005 20,640 245 0.004 18,240 180 0.003
0.4 8 16,440 225 0.004 15,480 160 0.003 13,680 120 0.002
0.4 10 8,220 95 0.004 7,740 70 0.003 6,840 50 0.002
0.5 1 27,400 540 0.045 25,800 425 0.035 22,800 285 0.025
0.5 1.5 27,400 540 0.045 25,800 425 0.035 22,800 285 0.025
0.5 2 27,400 540 0.032 25,800 425 0.025 22,800 285 0.018
0.5 2.5 27,400 540 0.032 25,800 425 0.025 22,800 285 0.018
0.5 3 24,660 435 0.018 23,220 345 0.014 20,520 230 0.010
0.5 4 24,660 435 0.018 23,220 345 0.014 20,520 230 0.010
0.5 5 24,660 435 0.011 23,220 345 0.009 20,520 230 0.006
0.5 6 21,920 345 0.011 20,640 270 0.009 18,240 180 0.006
0.5 8 16,440 225 0.007 15,480 180 0.005 13,680 120 0.004
0.5 10 16,440 225 0.005 15,480 180 0.004 13,680 120 0.003
0.5 12 8,220 95 0.005 7,740 75 0.004 6,840 50 0.003
0.5 14 8,220 95 0.005 7,740 75 0.004 6,840 50 0.003
0.5 16 2,740 25 0.005 2,580 20 0.004 2,280 15 0.003
0.6 2 27,400 775 0.038 25,800 545 0.029 22,800 405 0.021
0.6 3 27,400 775 0.038 25,800 545 0.029 22,800 405 0.021
0.6 4 24,660 630 0.022 23,220 440 0.017 20,520 330 0.012
0.6 5 24,660 630 0.014 23,220 440 0.011 20,520 330 0.008
0.6 6 24,660 630 0.014 23,220 440 0.011 20,520 330 0.008
0.6 8 21,920 495 0.008 20,640 350 0.006 18,240 260 0.005
0.6 10 16,440 325 0.005 15,480 230 0.004 13,680 170 0.003
426 KORLOY

Workpiece
(mm) (mm) (mm)
0.6 12 16,440 325 0.005 15,480 230 0.004 13,680 170 0.003
0.6 14 8,220 140 0.005 7,740 100 0.004 6,840 75 0.003
0.6 16 8,220 140 0.005 7,740 100 0.004 6,840 75 0.003
0.7 2 27,400 775 0.063 25,800 545 0.049 22,800 405 0.035
0.7 4 24,660 630 0.025 23,220 440 0.020 20,520 330 0.014
0.7 6 24,660 630 0.016 23,220 440 0.012 20,520 330 0.009
0.7 8 21,920 495 0.016 20,640 350 0.012 18,240 260 0.009
0.7 10 21,920 495 0.009 20,640 350 0.007 18,240 260 0.005
0.7 12 16,440 325 0.009 15,480 230 0.005 13,680 170 0.004
0.8 2 27,400 775 0.072 25,800 605 0.056 22,800 450 0.040
0.8 3 27,400 775 0.050 25,800 605 0.039 22,800 450 0.028
0.8 4 27,400 775 0.050 25,800 605 0.039 22,800 450 0.028
0.8 5 24,660 630 0.029 23,220 490 0.022 20,520 365 0.016
0.8 6 24,660 630 0.029 23,220 490 0.022 20,520 365 0.016
0.8 8 24,660 630 0.018 23,220 490 0.014 20,520 365 0.010
0.8 10 21,920 495 0.018 20,640 385 0.014 18,240 290 0.010
0.8 12 21,920 495 0.011 20,640 385 0.008 18,240 290 0.006
0.8 14 16,440 325 0.007 15,480 255 0.006 13,680 190 0.004
0.8 16 16,440 325 0.007 15,480 255 0.006 13,680 190 0.004
0.8 20 8,220 140 0.007 7,740 110 0.006 6,840 80 0.004
0.9 6 22,140 575 0.032 20,970 440 0.025 18,450 330 0.018
0.9 8 22,140 575 0.020 20,970 440 0.016 18,450 330 0.011
0.9 10 19,680 455 0.020 18,640 350 0.016 16,400 260 0.011
1.0 2 24,600 1,045 0.090 23,300 890 0.070 20,500 665 0.050
1.0 3 24,600 1,045 0.090 23,300 890 0.070 20,500 665 0.050
1.0 4 24,600 1,045 0.063 23,300 890 0.049 20,500 665 0.035
1.0 5 24,600 1,045 0.063 23,300 890 0.049 20,500 665 0.035
1.0 6 22,140 845 0.036 20,970 720 0.028 18,450 540 0.020
1.0 7 22,140 845 0.036 20,970 720 0.028 18,450 540 0.020
1.0 8 22,140 845 0.036 20,970 720 0.028 18,450 540 0.020
1.0 10 22,140 845 0.023 20,970 720 0.018 18,450 540 0.013
1.0 12 19,680 670 0.023 18,640 570 0.018 16,400 425 0.013
1.0 14 19,680 670 0.014 18,640 570 0.011 16,400 425 0.008
1.0 16 14,760 440 0.014 13,980 375 0.011 12,300 280 0.008
1.0 18 14,760 440 0.009 13,980 375 0.007 12,300 280 0.005
1.0 20 14,760 440 0.009 13,980 375 0.007 12,300 280 0.005
1.0 22 7,380 190 0.009 6,990 160 0.007 6,150 120 0.005
1.0 26 7,380 190 0.009 6,990 160 0.007 6,150 120 0.005
1.0 30 7,380 190 0.009 6,990 160 0.007 6,150 120 0.005
1.0 40 2,460 50 0.009 2,330 45 0.007 2,050 35 0.005
1.0 50 2,460 50 0.006 2,330 45 0.005 2,050 35 0.003
1.2 4 21,900 930 0.076 20,700 720 0.059 18,200 485 0.042
1.2 6 21,900 930 0.076 20,700 720 0.059 18,200 485 0.042
1.2 8 19,710 755 0.043 18,630 585 0.034 16,380 395 0.024
KORLOY
Y 427
H-Star Endmill
Workpiece
(mm) (mm) (mm)
1.2 10 19,710 755 0.027 18,630 585 0.021 16,380 395 0.015
1.2 12 19,710 755 0.027 18,630 585 0.021 16,380 395 0.015
1.2 14 17,520 595 0.027 16,560 460 0.021 14,560 310 0.015
1.2 16 17,520 595 0.016 16,560 460 0.013 14,560 310 0.009
1.2 20 13,140 390 0.011 12,420 300 0.008 10,920 205 0.006
1.2 26 6,570 165 0.011 6,210 130 0.008 5,460 85 0.006
1.2 30 6,570 165 0.011 6,210 130 0.008 5,460 85 0.006
1.4 6 19,200 815 0.088 18,100 570 0.069 16,000 425 0.049
1.4 8 17,280 660 0.050 16,290 460 0.039 14,400 345 0.028
1.4 10 17,280 660 0.050 16,290 460 0.039 14,400 345 0.028
1.4 14 17,280 660 0.032 16,290 460 0.025 14,400 345 0.018
1.4 16 15,360 520 0.032 14,480 365 0.025 12,800 270 0.018
1.4 20 15,360 520 0.019 14,480 365 0.015 12,800 270 0.011
1.5 4 19,200 905 0.135 18,100 635 0.105 16,000 475 0.075
1.5 5 19,200 905 0.095 18,100 635 0.074 16,000 475 0.053
1.5 6 19,200 905 0.095 18,100 635 0.074 16,000 475 0.053
1.5 7 19,200 905 0.095 18,100 635 0.074 16,000 475 0.053
1.5 8 17,280 735 0.054 16,290 515 0.042 14,400 385 0.030
1.5 10 17,280 735 0.054 16,290 515 0.042 14,400 385 0.030
1.5 12 17,280 735 0.054 16,290 515 0.042 14,400 385 0.030
1.5 14 17,280 735 0.034 16,290 515 0.026 14,400 385 0.019
1.5 16 15,360 580 0.034 14,480 405 0.026 12,800 305 0.019
1.5 18 15,360 580 0.034 14,480 405 0.026 12,800 305 0.019
1.5 20 15,360 580 0.020 14,480 405 0.016 12,800 305 0.011
1.5 22 15,360 580 0.020 14,480 405 0.016 12,800 305 0.011
1.5 26 11,520 380 0.014 10,860 265 0.011 9,600 200 0.008
1.5 30 11,520 380 0.014 10,860 265 0.011 9,600 200 0.008
1.6 8 17,800 840 0.101 16,800 655 0.078 14,800 490 0.056
1.6 10 16,020 680 0.058 15,120 530 0.045 13,320 395 0.032
1.6 12 16,020 680 0.058 15,120 530 0.045 13,320 395 0.032
1.6 16 16,020 680 0.036 15,120 530 0.028 13,320 395 0.020
1.6 20 14,240 540 0.036 13,440 420 0.028 11,840 315 0.020
1.8 8 17,800 840 0.113 16,800 655 0.088 14,800 490 0.063
1.8 10 16,020 680 0.065 15,120 530 0.050 13,320 395 0.036
1.8 12 16,020 680 0.065 15,120 530 0.050 13,320 395 0.036
1.8 16 16,020 680 0.041 15,120 530 0.032 13,320 395 0.023
1.8 20 14,240 540 0.041 13,440 420 0.032 11,840 315 0.023
2.0 6 14,400 820 0.180 13,600 620 0.140 12,000 475 0.100
2.0 8 14,400 820 0.126 13,600 620 0.098 12,000 475 0.070
2.0 10 14,400 820 0.126 13,600 620 0.098 12,000 475 0.070
2.0 12 12,960 665 0.072 12,240 500 0.056 10,800 385 0.040
2.0 14 12,960 665 0.072 12,240 500 0.056 10,800 385 0.040
2.0 16 12,960 665 0.072 12,240 500 0.056 10,800 385 0.040
2.0 18 12,960 665 0.045 12,240 500 0.035 10,800 385 0.025
428 KORLOY

Workpiece
(mm) (mm) (mm)
2.0 20 12,960 665 0.045 12,240 500 0.035 10,800 385 0.025
2.0 22 11,520 525 0.045 10,880 395 0.035 9,600 305 0.025
2.0 26 11,520 525 0.045 10,880 395 0.035 9,600 305 0.025
2.0 30 11,520 525 0.027 10,880 395 0.021 9,600 305 0.015
2.0 35 8,640 345 0.018 8,160 260 0.014 7,200 200 0.010
2.0 40 8,640 345 0.018 8,160 260 0.014 7,200 200 0.010
2.0 45 4,320 150 0.018 4,080 110 0.014 3,600 85 0.010
2.0 50 4,320 150 0.018 4,080 110 0.014 3,600 85 0.010
2.0 60 4,320 150 0.018 4,080 110 0.014 3,600 85 0.010
2.5 8 12,300 970 0.158 11,600 680 0.123 10,300 510 0.088
2.5 10 12,300 970 0.158 11,600 680 0.123 10,300 510 0.088
2.5 12 12,300 970 0.158 11,600 680 0.123 10,300 510 0.088
2.5 14 11,070 785 0.090 10,440 550 0.070 9,270 415 0.050
2.5 16 11,070 785 0.090 10,440 550 0.070 9,270 415 0.050
2.5 18 11,070 785 0.090 10,440 550 0.070 9,270 415 0.050
2.5 20 11,070 785 0.090 10,440 550 0.070 9,270 415 0.050
2.5 22 11,070 785 0.056 10,440 550 0.044 9,270 415 0.031
2.5 26 9,840 620 0.056 9,280 435 0.044 8,240 325 0.031
2.5 30 9,840 620 0.056 9,280 435 0.044 8,240 325 0.031
2.5 35 9,840 620 0.034 9,280 435 0.026 8,240 325 0.019
2.5 40 7,380 405 0.034 6,960 285 0.026 6,180 215 0.019
2.5 45 7,380 405 0.023 6,960 285 0.018 6,180 215 0.013
2.5 50 7,380 405 0.023 6,960 285 0.018 6,180 215 0.013
3.0 6 10,900 860 0.270 10,300 605 0.210 6,600 450 0.150
3.0 8 10,900 860 0.270 10,300 605 0.210 6,600 450 0.150
3.0 10 10,900 860 0.189 10,300 605 0.147 6,600 450 0.105
3.0 12 10,900 860 0.189 10,300 605 0.147 6,600 450 0.105
3.0 14 10,900 860 0.189 10,300 605 0.147 6,600 450 0.105
3.0 16 9,810 695 0.108 9,270 490 0.084 5,940 365 0.060
3.0 18 9,810 695 0.108 9,270 490 0.084 5,940 365 0.060
3.0 20 9,810 695 0.108 9,270 490 0.084 5,940 365 0.060
3.0 22 9,810 695 0.108 9,270 490 0.084 5,940 365 0.060
3.0 26 9,810 695 0.068 9,270 490 0.053 5,940 365 0.038
3.0 30 9,810 695 0.068 9,270 490 0.053 5,940 365 0.038
3.0 35 8,720 550 0.068 8,240 385 0.053 5,280 290 0.038
3.0 40 8,720 550 0.041 8,240 385 0.032 5,280 290 0.023
3.0 45 8,720 550 0.041 8,240 385 0.032 5,280 290 0.023
3.0 50 6,540 360 0.027 6,180 255 0.021 3,960 190 0.015
3.0 60 6,540 360 0.027 6,180 255 0.021 3,960 190 0.015
4.0 8 8,000 1,300 0.360 7,600 1,160 0.280 6,700 770 0.200
4.0 10 8,000 1,300 0.360 7,600 1,160 0.280 6,700 770 0.200
4.0 12 8,000 1,300 0.360 7,600 1,160 0.280 6,700 770 0.200
4.0 14 8,000 1,300 0.252 7,600 1,160 0.196 6,700 770 0.140
4.0 16 8,000 1,300 0.252 7,600 1,160 0.196 6,700 770 0.140
KORLOY
Y 429
H-Star Endmill
Workpiece
(mm) (mm) (mm)
4.0 18 8,000 1,300 0.252 7,600 1,160 0.196 6,700 770 0.140
4.0 20 8,000 1,300 0.252 7,600 1,160 0.196 6,700 770 0.140
4.0 22 7,200 1,055 0.144 6,840 940 0.112 6,030 625 0.080
4.0 26 7,200 1,055 0.144 6,840 940 0.112 6,030 625 0.080
4.0 30 7,200 1,055 0.144 6,840 940 0.112 6,030 625 0.080
4.0 35 7,200 1,055 0.090 6,840 940 0.070 6,030 625 0.050
4.0 40 7,200 1,055 0.090 6,840 940 0.070 6,030 625 0.050
4.0 45 6,400 830 0.090 6,080 740 0.070 5,360 495 0.050
4.0 50 6,400 830 0.090 6,080 740 0.070 5,360 495 0.050
4.0 60 6,400 830 0.054 6,080 740 0.042 5,360 495 0.030
5.0 16 6,400 1,155 0.315 6,100 900 0.245 5,400 605 0.175
5.0 20 6,400 1,155 0.315 6,100 900 0.245 5,400 605 0.175
5.0 26 5,760 935 0.180 5,490 730 0.140 4,860 490 0.100
5.0 30 5,760 935 0.180 5,490 730 0.140 4,860 490 0.100
5.0 35 5,760 935 0.180 5,490 730 0.140 4,860 490 0.100
5.0 40 5,760 935 0.180 5,490 730 0.140 4,860 490 0.100
5.0 50 5,760 935 0.113 5,490 730 0.088 4,860 490 0.063
5.0 60 5,120 740 0.113 4,880 575 0.088 4,320 385 0.063
6.0 15 5,300 1,055 0.540 5,000 820 0.420 4,400 550 0.300
6.0 20 5,300 1,055 0.378 5,000 820 0.294 4,400 550 0.210
6.0 30 5,300 1,055 0.378 5,000 820 0.294 4,400 550 0.210
6.0 32 4,770 855 0.216 4,500 665 0.168 3,960 445 0.120
8.0 25 4,000 950 0.504 3,800 750 0.392 3,300 500 0.280
8.0 30 4,000 950 0.504 3,800 750 0.392 3,300 500 0.280
8.0 42 3,600 770 0.288 3,400 605 0.224 2,950 405 0.160
10.0 30 3,200 900 0.900 3,050 680 0.700 2,630 400 0.500
10.0 35 3,200 900 0.630 3,050 680 0.490 2,630 400 0.350
10.0 45 3,200 900 0.630 3,050 680 0.490 2,630 400 0.350
12.0 35 2,650 800 1.080 2,520 600 0.840 2,180 350 0.600
12.0 40 2,650 800 0.756 2,520 600 0.588 2,180 350 0.420
12.0 50 2,650 800 0.756 2,520 600 0.588 2,180 350 0.420
Application tip
ap
ae : 0.03D
430 KORLOY
ESRE714
Workpiece
(mm) (mm) (mm)
0.5 1 27,400 756 0.045 25,800 595 0.035 22,800 399 0.025
0.5 2 27,400 756 0.032 25,800 595 0.025 22,800 399 0.018
0.5 3 24,660 609 0.018 23,220 483 0.014 20,520 322 0.01
0.5 4 24,660 609 0.018 23,220 483 0.014 20,520 322 0.01
0.5 5 24,660 609 0.011 23,220 483 0.009 20,520 322 0.006
0.5 6 21,920 483 0.011 20,640 378 0.009 18,240 252 0.006
0.5 8 16,440 315 0.007 15,480 252 0.005 13,680 168 0.004
0.5 10 16,440 315 0.005 15,480 252 0.004 13,680 168 0.003
0.6 1 27,400 1085 0.038 25,800 763 0.029 22,800 567 0.021
0.6 2 27,400 1085 0.038 25,800 763 0.029 22,800 567 0.021
0.6 3 27,400 1085 0.038 25,800 763 0.029 22,800 567 0.021
0.6 4 24,660 882 0.022 23,220 616 0.017 20,520 462 0.012
0.6 5 24,660 882 0.014 23,220 616 0.011 20,520 462 0.008
0.6 6 24,660 882 0.014 23,220 616 0.011 20,520 462 0.008
0.6 8 21,920 693 0.008 20,640 490 0.006 18,240 364 0.005
0.6 10 16,440 455 0.005 15,480 322 0.004 13,680 238 0.003
0.6 12 16,440 455 0.005 15,480 322 0.004 13,680 238 0.003
0.7 2 27,400 1085 0.063 25,800 763 0.049 22,800 567 0.035
0.7 4 24,660 882 0.025 23,220 616 0.02 20,520 462 0.014
0.7 6 24,660 693 0.016 23,220 616 0.012 20,520 462 0.009
0.7 8 21,920 693 0.016 20,640 490 0.012 18,240 364 0.009
0.7 10 21,920 0.009 20,640 490 0.007 18,240 364 0.005
0.8 1 27,400 1085 0.072 25,800 847 0.056 22,800 630 0.04
0.8 2 27,400 1085 0.072 25,800 847 0.056 22,800 630 0.04
0.8 3 27,400 1085 0.05 25,800 847 0.039 22,800 630 0.028
0.8 4 27,400 1085 0.05 25,800 847 0.039 22,800 630 0.028
0.8 5 24,660 882 0.029 23,220 686 0.022 20,520 511 0.016
0.8 6 24,660 882 0.029 23,220 686 0.022 20,520 511 0.016
0.8 8 24,660 882 0.018 23,220 686 0.014 20,520 511 0.01
0.8 10 21,920 693 0.018 20,640 539 0.014 18,240 406 0.01
0.8 12 21,920 693 0.011 20,640 539 0.008 18,240 406 0.006
0.8 16 16,440 455 0.007 15,480 357 0.006 13,680 266 0.004
1 2 24,600 1463 0.09 23,300 1246 0.07 20,500 931 0.05
1 3 24,600 1463 0.09 23,300 1246 0.07 20,500 931 0.05
1 4 24,600 1463 0.063 23,300 1246 0.049 20,500 931 0.035
1 6 22,140 1183 0.036 20,970 1008 0.028 18,450 756 0.02
1 8 22,140 1183 0.036 20,970 1008 0.028 18,450 756 0.02
1 10 22,140 1183 0.023 20,970 1008 0.018 18,450 756 0.013
1 12 19,680 938 0.023 18,640 798 0.018 16,400 595 0.013
1 14 19,680 938 0.014 18,640 798 0.011 16,400 595 0.008
1 16 14,760 616 0.014 13,980 525 0.011 12,300 392 0.008
1 18 14,760 616 0.009 13,980 525 0.007 12,300 392 0.005
1 20 14,760 616 0.009 13,980 525 0.007 12,300 392 0.005
1.2 4 21,900 1,302 0.076 20,700 1008 0.059 18,200 679 0.042
1.2 6 21,900 1,302 0.076 20,700 1008 0.059 18,200 679 0.042
1.2 8 19,710 1,057 0.043 18,630 819 0.034 16,380 553 0.024
1.2 10 19,710 1,057 0.027 18,630 819 0.021 16,380 553 0.015
1.2 12 19,710 1057 0.027 18,630 819 0.021 16,380 553 0.015
KORLOY 431
H-Star Endmill
ESRE714
Workpiece
(mm) (mm) (mm)
1.2 16 17,520 833 0.016 16,560 644 0.013 14,560 434 0.009
1.2 18 17,520 833 0.016 16,560 644 0.013 14,560 434 0.009
1.2 20 13,140 546 0.011 12,420 420 0.008 10,920 287 0.006
1.4 6 19,200 1141 0.088 18,100 798 0.069 16,000 595 0.049
1.4 8 17,280 924 0.05 16,290 644 0.039 14,400 483 0.028
1.4 10 17,280 924 0.05 16,290 644 0.039 14,400 483 0.028
1.4 12 17,280 924 0.05 16,290 644 0.039 14,400 483 0.028
1.4 14 17,280 924 0.032 16,290 644 0.025 14,400 483 0.018
1.4 16 15,360 728 0.032 14,480 511 0.025 12,800 378 0.018
1.5 4 19,200 1267 0.135 18,100 889 0.105 16,000 665 0.075
1.5 6 19,200 1267 0.095 18,100 889 0.074 16,000 665 0.053
1.5 8 17,280 1029 0.054 16,290 721 0.042 14,400 539 0.03
1.5 10 17,280 1029 0.054 16,290 721 0.042 14,400 539 0.03
1.5 12 17,280 1029 0.054 16,290 721 0.042 14,400 539 0.03
1.5 16 15,360 812 0.034 14,480 567 0.026 12,800 427 0.019
1.5 18 15,360 812 0.034 14,480 567 0.026 12,800 427 0.019
1.5 20 15,360 812 0.02 14,480 567 0.016 12,800 427 0.011
1.5 25 11,520 532 0.014 10,860 371 0.011 9,600 280 0.008
1.5 30 11,520 532 0.014 10,860 371 0.011 9,600 280 0.008
1.6 6 17,800 1176 0.101 16,800 917 0.078 14,800 686 0.056
1.6 8 17,800 1176 0.101 16,800 917 0.078 14,800 686 0.056
1.6 10 16,020 952 0.058 15,120 742 0.045 13,320 553 0.032
1.6 12 16,020 952 0.058 15,120 742 0.045 13,320 553 0.032
1.6 14 16,020 952 0.058 15,120 742 0.045 13,320 553 0.032
1.6 16 16,020 952 0.036 15,120 752 0.028 13,320 553 0.02
1.6 18 16,020 952 0.036 15,120 752 0.028 13,320 553 0.02
1.6 20 14,240 756 0.036 13,440 588 0.028 11,840 441 0.02
1.6 25 14,240 756 0.036 13,440 588 0.028 11,840 441 0.02
1.8 6 17,800 1176 0.113 16,800 917 0.088 14,800 686 0.063
1.8 8 17,800 1176 0.113 16,800 917 0.088 14,800 686 0.063
1.8 10 16,020 952 0.065 15,120 742 0.05 13,320 553 0.036
1.8 12 16,020 952 0.065 15,120 742 0.05 13,320 553 0.036
1.8 16 16,020 952 0.041 15,120 742 0.032 13,320 553 0.023
1.8 20 14,240 756 0.041 13,440 588 0.032 11,840 441 0.023
1.8 25 14,240 756 0.041 13,440 588 0.032 11,840 441 0.023
2 4 14,400 1148 0.18 13,600 868 0.14 12,000 665 0.1
2 6 14,400 1148 0.18 13,600 868 0.14 12,000 665 0.1
2 8 14,400 1148 0.126 13,600 868 0.098 12,000 665 0.07
2 10 14,400 1148 0.126 13,600 868 0.098 12,000 665 0.07
2 12 12,960 931 0.072 12,240 700 0.056 10,800 539 0.04
2 14 12,960 931 0.072 12,240 700 0.056 10,800 539 0.04
2 16 12,960 931 0.072 12,240 700 0.056 10,800 539 0.04
2 18 12,960 931 0.045 12,240 700 0.035 10,800 539 0.025
2 20 12,960 931 0.045 12,240 700 0.035 10,800 539 0.025
2 22 11,520 735 0.045 10,880 553 0.035 9,600 427 0.025
2 25 11,520 735 0.045 10,880 553 0.035 9,600 427 0.025
2 30 11,520 735 0.027 10,880 553 0.021 9,600 427 0.015
2.5 10 12,300 1358 0.158 11,600 952 0.123 10,300 714 0.088
432 KORLOY
ESRE714
Workpiece
(mm) (mm) (mm)
2.5 12 12,300 1358 0.158 11,600 952 0.123 10,300 714 0.088
2.5 16 11,070 1099 0.09 10,440 770 0.07 9,270 581 0.05
2.5 20 11,070 1099 0.09 10,440 770 0.07 9,270 581 0.05
2.5 25 9,840 868 0.056 9,280 609 0.044 8,240 455 0.031
2.5 30 9,840 868 0.056 9,280 609 0.044 8,240 455 0.031
3 6 10,900 1204 0.27 10,300 847 0.21 6,600 630 0.15
3 8 10,900 1204 0.27 10,300 847 0.21 6,600 630 0.15
3 10 10,900 1204 0.189 10,300 847 0.147 6,600 630 0.105
3 12 10,900 1204 0.189 10,300 847 0.147 6,600 630 0.105
3 16 9,810 973 0.108 9,270 686 0.084 5,940 511 0.06
3 20 9,810 973 0.108 9,270 686 0.084 5,940 511 0.06
3 25 9,810 973 0.068 9,270 686 0.053 5,940 511 0.038
3 30 9,810 973 0.068 9,270 686 0.053 5,940 511 0.038
3 35 8,720 770 0.068 8,240 539 0.053 5,280 406 0.038
3 40 8,720 770 0.041 8,240 539 0.032 5,280 406 0.023
3 45 8,720 770 0.041 8,240 539 0.032 5,280 406 0.023
3 50 6,540 504 0.027 6,180 357 0.021 3,960 266 0.015
3 60 6,540 504 0.027 6,180 357 0.021 3,960 266 0.015
3.5 12 9,310 1430 0.236 8,800 1008 0.183 5,640 750 0.131
3.5 16 8,380 1158 0.135 7,920 816 0.105 5,070 608 0.075
3.5 20 8,380 1158 0.135 7,920 816 0.105 5,070 608 0.047
3.5 25 8,380 1158 0.085 7,920 816 0.066 5,070 608 0.047
3.5 30 8,380 1158 0.085 7,920 816 0.066 5,070 608 0.047
3.5 35 7,450 916 0.085 7,040 641 0.066 4,510 483 0.047
3.5 40 7,450 916 0.051 7,040 641 0.04 4,510 483 0.028
4 6 8,000 1820 0.36 7,600 1624 0.28 6,700 1078 0.2
4 8 8,000 1820 0.36 7,600 1624 0.28 6,700 1078 0.2
4 10 8,000 1820 0.36 7,600 1624 0.28 6,700 1078 0.2
4 12 8,000 1820 0.36 7,600 1624 0.28 6,700 1078 0.2
4 16 8,000 1820 0.252 7,600 1624 0.196 6,700 1078 0.14
4 20 8,000 1820 0.252 7,600 1624 0.196 6,700 1078 0.14
4 25 7,200 1477 0.144 6,840 1316 0.112 6,030 875 0.08
4 30 7,200 1477 0.144 6,840 1316 0.112 6,030 875 0.08
4 40 7,200 1477 0.09 6,840 1316 0.07 6,030 875 0.05
4 45 6,400 1162 0.09 6,080 1036 0.07 5,360 693 0.05
4 50 6,400 1162 0.09 6,080 1036 0.07 5,360 693 0.05
4 60 6,400 1162 0.054 6,080 1036 0.042 5,360 693 0.03
4.5 12 6,830 2166 0.45 6,490 1933 0.35 5,720 1283 0.25
4.5 16 6,830 2166 0.315 6,490 1933 0.245 5,720 1283 0.175
4.5 20 6,830 2166 0.315 6,490 1933 0.245 5,720 1283 0.175
4.5 25 6,150 1758 0.18 5,840 1566 0.14 5,150 1041 0.1
4.5 30 6,150 1758 0.18 5,840 1566 0.14 5,150 1041 0.1
Application tip
ap
ae : 0.03D
KORLOY 433
H-Star Endmill
ESRE714
Workpiece
(mm) (mm) (mm)
4.5 40 6,150 1758 0.112 5,840 1566 0.087 5,150 1041 0.062
5 16 6,400 1617 0.315 6,100 1260 0.245 5,400 847 0.175
5 20 6,400 1617 0.315 6,100 1260 0.245 5,400 847 0.175
5 25 5,760 1309 0.18 5,490 1022 0.14 4,860 686 0.1
5 30 5,760 1309 0.18 5,490 1022 0.14 4,860 686 0.1
5 40 5,760 1309 0.18 5,490 1022 0.14 4,860 686 0.1
5 50 5,760 1309 0.113 5,490 1022 0.088 4,860 686 0.063
5 60 5,120 1036 0.113 4,880 805 0.088 4,320 539 0.063
6 20 5,300 1477 0.378 5,000 1148 0.294 4,400 770 0.21
6 30 5,300 1,477 0.378 5,000 1,148 0.294 4,400 770 0.21
6 40 4,770 1,197 0.216 4,500 931 0.168 3,960 623 0.12
6 50 4,770 1,197 0.216 4,500 931 0.168 3,960 623 0.12
6 60 4,370 958 0.141 4,171 931 0.11 3,690 623 0.078
8 25 4,000 1,330 0.504 3,800 1,050 0.392 3,300 700 0.28
8 40 3,600 1,078 0.288 3,400 847 0.224 2,950 567 0.16
8 50 3,600 1,078 0.288 3,400 847 0.224 2,950 567 0.16
10 30 3,200 1,260 0.9 3,050 952 0.7 2,630 560 0.5
10 50 3,200 1,260 0.63 3,050 952 0.49 2,630 560 0.35
10 60 3,200 1,260 0.63 3,050 952 0.49 2,630 560 0.35
12 40 2,650 1,120 0.756 2,520 840 0.588 2,180 490 0.42
12 60 2,360 896 0.472 2,250 672 0.367 1,940 392 0.262
12 70 2,360 896 0.472 2,250 672 0.367 1,940 392 0.262
Application tip
ap
434 KORLOY
ESRR712 series
Carbon steels, Alloy steels Pre-hardened steels Hardened steels High-hardened steels
Workpiece
180~250HB HRC35~45 HRC45~55 HRC55~65
Ratio to standard depth of cut Depth of Cut × 100% Depth of Cut × 80% Depth of Cut × 65% Depth of Cut × 60%
Diameter Corner R Neck length Depth of Cut R.P.M Feed R.P.M Feed R.P.M Feed R.P.M Feed
(Ø) (mm) (mm) (mm) n (min -1) vf (mm/min) n (min -1) vf (mm/min) n (min -1) vf (mm/min) n (min -1) vf (mm/min)
0.5 0.016 50,000 258 50,000 205 50,000 180 50,000 160
0.02 1 0.011 50,000 258 50,000 205 50,000 180 50,000 160
1.5 0.007 42,000 202 36,700 176 36,700 162 36,700 147
0.2
0.5 0.02 50,000 258 50,000 205 50,000 180 50,000 160
0.05 1 0.014 50,000 258 50,000 205 50,000 180 50,000 160
1.5 0.008 50,000 240 45,900 202 45,900 170 45,900 153
1 0.016 50,000 585 50,000 456 50,000 336 50,000 320
0.02 2 0.011 45,000 530 45,000 420 45,000 300 45,000 290
3 0.007 35,000 412 35,000 326 30,000 200 30,000 194
0.3
1 0.021 50,000 585 50,000 456 50,000 336 50,000 320
0.05 2 0.012 45,000 530 45,000 420 45,000 300 45,000 290
3 0.008 35,000 412 35,000 326 30,000 200 30,000 194
1 0.016 50,000 580 50,000 461 40,000 320 36,000 270
2 0.013 45,000 520 45,000 410 36,000 290 34,000 240
0.02
3 0.01 40,000 410 40,000 330 32,800 240 25,600 200
4 0.007 30,000 320 30,000 250 21,600 160 19,200 150
1 0.025 50,000 580 50,000 461 40,000 320 36,000 270
2 0.016 45,000 520 45,000 410 36,000 290 34,000 240
0.05
0.4 3 0.014 40,000 410 40,000 330 32,800 240 25,600 200
4 0.008 30,000 320 30,000 250 21,600 160 19,200 150
1 0.033 50,000 580 50,000 461 40,000 320 36,000 270
1.5 0.03 50,000 580 50,000 461 40,000 320 36,000 270
0.1 2 0.028 45,000 520 45,000 410 36,000 290 34,000 240
3 0.016 40,000 410 40,000 330 32,800 240 25,600 200
4 0.01 30,000 320 30,000 250 21,600 160 19,200 150
1 0.016 50,000 898 40,000 464 30,000 378 28,000 315
1.5 0.014 50,000 898 40,000 464 30,000 378 28,000 315
2 0.013 50,000 898 40,000 464 30,000 378 28,000 315
2.5 0.011 45,000 810 36,000 414 27,000 315 24,500 261
3 0.01 45,000 810 36,000 414 27,000 315 24,500 261
0.02
4 0.008 40,000 720 32,000 378 24,000 279 20,000 234
5 0.007 40,000 720 32,000 378 24,000 279 20,000 234
6 0.006 28,800 480 19,400 260 18,000 250 15,000 200
8 0.005 28,800 480 19,400 260 18,000 250 15,000 200
10 0.004 28,800 480 19,400 260 18,000 250 15,000 200
0.5
1 0.03 50,000 898 40,000 464 30,000 378 28,000 315
1.5 0.026 50,000 898 40,000 464 30,000 378 28,000 315
2 0.023 50,000 898 40,000 464 30,000 378 28,000 315
2.5 0.02 45,000 810 36,000 414 27,000 315 24,500 261
3 0.017 45,000 810 36,000 414 27,000 315 24,500 261
0.05
4 0.017 40,000 720 32,000 378 24,000 279 20,000 234
5 0.011 28,800 540 19,400 280 18,000 250 15,000 200
6 0.008 28,800 480 19,400 260 18,000 250 15,000 200
8 0.007 28,800 480 19,400 260 18,000 250 15,000 200
10 0.006 28,800 480 19,400 260 18,000 250 15,000 200
KORLOY
Y 435
H-Star Endmill
ESRR712 series
Workpiece
180~250HB HRC35~45 HRC45~55 HRC55~65
1 0.035 50,000 898 40,000 464 30,000 378 28,000 315

1.5 0.032 50,000 898 40,000 464 30,000 378 28,000 315
2 0.03 50,000 898 40,000 464 30,000 378 28,000 315
2.5 0.025 45,000 810 36,000 414 27,000 315 24,500 261
3 0.02 45,000 810 36,000 414 27,000 315 24,500 261
0.5 0.1
4 0.02 40,000 720 32,000 378 24,000 279 20,000 234
5 0.013 28,800 540 19,400 280 18,000 250 15,000 200
6 0.013 28,800 480 19,400 260 18,000 250 15,000 200
8 0.01 28,800 480 19,400 260 18,000 250 15,000 200
10 0.08 28,800 480 19,400 260 18,000 250 15,000 200
2 0.016 50,000 1,159 37,830 600 28,200 390 23,000 320
3 0.014 40,000 830 27,800 440 23,600 280 21,000 230
4 0.013 40,000 830 27,800 440 23,600 280 21,000 230
0.02 6 0.01 24,000 490 18,000 300 17,800 240 15,000 210
8 0.008 24,000 466 18,000 285 17,800 228 15,000 200
10 0.007 24,000 451 18,000 276 17,800 221 15,000 193
12 0.006 24,000 451 18,000 276 17,800 221 15,000 193
2 0.028 50,000 1,159 37,830 600 28,200 390 23,000 320
3 0.023 40,000 830 27,800 440 23,600 280 21,000 230
4 0.019 40,000 830 27,800 440 23,600 280 21,000 230
0.6 0.05 6 0.012 24,000 490 18,000 300 17,800 240 15,000 210
8 0.01 24,000 466 18,000 285 17,800 228 15,000 200
10 0.007 24,000 451 18,000 276 17,800 221 15,000 193
12 0.006 24,000 451 18,000 276 17,800 221 15,000 193
2 0.035 50,000 1,159 37,830 600 28,200 390 23,000 320
3 0.03 40,000 830 27,800 440 23,600 280 21,000 230
4 0.024 40,000 830 27,800 440 23,600 280 21,000 230
0.1 6 0.015 24,000 490 18,000 300 17,800 240 15,000 210
8 0.013 24,000 466 18,000 285 17,800 228 15,000 200
10 0.009 24,000 451 18,000 276 17,800 221 15,000 193
12 0.007 24,000 451 18,000 276 17,800 221 15,000 193
2 0.042 49,200 1,054 34,190 558 29,030 355 25,830 292
4 0.029 40,000 830 27,800 440 23,600 280 21,000 230
0.7 0.1 6 0.018 24,000 490 18,000 300 17,800 240 15,000 210
8 0.015 24,000 490 18,000 300 17,800 240 15,000 210
10 0.012 24,000 490 18,000 300 17,800 240 15,000 210
2 0.016 48,000 1,378 28,000 647 20,000 400 20,000 360
4 0.016 48,000 1,102 28,000 518 20,000 320 20,000 288
6 0.013 38,700 800 25,000 461 18,000 288 18,000 256
0.02
8 0.011 29,025 600 20,000 369 16,200 259 16,200 230
0.8
10 0.01 29,025 570 20,000 350 16,200 246 16,200 219
12 0.09 29,025 570 20,000 350 16,200 246 16,200 219
2 0.038 48,000 1,378 28,000 647 20,000 400 20,000 360
0.05
4 0.026 48,000 1,102 28,000 518 20,000 320 20,000 288
436 KORLOY
ESRR712 series
Workpiece
180~250HB HRC35~45 HRC45~55 HRC55~65
6 0.015 38,700 800 25,000 461 18,000 288 18,000 256

8 0.012 29,025 600 20,000 369 16,200 259 16,200 230
0.05
10 0.011 29,025 570 20,000 350 16,200 246 16,200 219
12 0.01 29,025 570 20,000 350 16,200 246 16,200 219
2 0.047 48,000 1,378 28,000 647 20,000 400 20,000 360
4 0.032 48,000 1,102 28,000 518 20,000 320 20,000 288
6 0.019 38,700 800 25,000 461 18,000 288 18,000 256
0.1
8 0.015 29,025 600 20,000 369 16,200 259 16,200 230
0.8
10 0.013 29,025 570 20,000 350 16,200 246 16,200 219
12 0.012 29,025 570 20,000 350 16,200 246 16,200 219
2 0.081 48,000 1,378 28,000 647 20,000 400 20,000 360
4 0.056 48,000 1,102 28,000 518 20,000 320 20,000 288
6 0.032 38,700 800 25,000 461 18,000 288 18,000 256
0.2
8 0.018 29,025 600 20,000 369 16,200 259 16,200 230
10 0.016 29,025 570 20,000 350 16,200 246 16,200 219
12 0.015 29,025 570 20,000 350 16,200 246 16,200 219
4 0.013 32,400 1,359 27,540 1,039 24,300 815 22,680 666
6 0.01 26,244 990 22,307 842 19,683 660 18,371 539
8 0.008 23,328 880 19,829 748 17,496 587 16,330 479
10 0.006 20,412 770 17,350 655 15,309 514 14,288 419
0.02
12 0.005 18,144 609 15,422 453 13,608 399 12,701 320
14 0.004 18,144 533 15,422 420 13,608 342 12,701 266
16 0.004 18,144 533 15,422 420 13,608 342 12,701 266
20 0.003 13,608 399 11,567 315 10,206 257 9,526 200
4 0.027 32,400 1,359 28,917 1,128 24,300 815 22,680 666
6 0.017 26,244 990 24,538 928 19,683 660 18,371 539
8 0.016 23,328 880 19,829 748 17,496 587 16,330 479
10 0.011 20,412 770 17,350 655 15,309 514 14,288 419
0.05
12 0.01 18,144 609 15,422 453 13,608 399 12,701 320
14 0.008 18,144 533 15,422 420 13,608 342 12,701 266
1
16 0.006 18,144 533 15,422 420 13,608 342 12,701 266
20 0.004 13,608 399 11,567 315 10,206 257 9,526 200
4 0.038 32,400 1,359 27,540 1,039 24,300 815 22,680 666
6 0.024 26,244 990 22,307 842 19,683 660 18,371 539
8 0.024 23,328 880 19,829 748 17,496 587 16,330 479
10 0.015 20,412 770 17,350 655 15,309 514 14,288 419
0.1
12 0.015 18,144 609 15,422 453 13,608 399 12,701 320
14 0.012 18,144 533 15,422 420 13,608 342 12,701 266
16 0.009 18,144 533 15,422 420 13,608 342 12,701 266
20 0.006 13,608 399 11,567 315 10,206 257 9,526 200
4 0.07 32,400 1,359 27,540 1,039 24,300 815 22,680 666
6 0.04 26,244 990 22,307 842 19,683 660 18,371 539
0.2
8 0.04 23,328 880 19,829 748 17,496 587 16,330 479
10 0.025 20,412 770 17,350 655 15,309 514 14,288 419
KORLOY
Y 437
H-Star Endmill
ESRR712 series
Workpiece
180~250HB HRC35~45 HRC45~55 HRC55~65
12 0.025 18,144 609 15,422 453 13,608 399 12,701 320

14 0.02 18,144 533 15,422 420 13,608 342 12,701 266
0.2
16 0.015 18,144 533 15,422 420 13,608 342 12,701 266
20 0.01 13,608 399 11,567 315 10,206 257 9,526 200
4 0.07 32,400 1,359 27,540 1,039 24,300 815 22,680 666
6 0.04 26,244 990 22,307 842 19,683 660 18,371 539
1
8 0.04 23,328 880 19,829 748 17,496 587 16,330 479
10 0.025 20,412 770 17,350 655 15,309 514 14,288 419
0.3
12 0.025 18,144 609 15,422 453 13,608 399 12,701 320
14 0.02 18,144 533 15,422 420 13,608 342 12,701 266
16 0.015 18,144 533 15,422 420 13,608 342 12,701 266
20 0.01 13,608 399 11,567 315 10,206 257 9,526 200
4 0.013 28,868 1,154 24,538 928 21,651 727 20,208 594
6 0.01 28,868 1,154 24,538 928 21,651 727 20,208 594
8 0.008 24,640 962 20,944 791 18,480 620 17,248 506
10 0.006 20,412 770 17,350 655 15,309 514 14,288 419
0.02
12 0.005 19,278 652 16,386 554 14,458 428 13,494 342
14 0.004 18,144 533 15,422 453 13,608 342 12,701 266
16 0.004 18,144 533 15,422 453 13,608 342 12,701 266
20 0.003 13,608 399 11,567 315 10,206 257 9,526 200
4 0.027 28,868 1,154 24,538 928 21,651 727 20,208 594
6 0.017 28,868 1,154 24,538 928 21,651 727 20,208 594
8 0.016 24,640 962 20,944 791 18,480 620 17,248 506
10 0.011 20,412 770 17,350 655 15,309 514 14,288 419
0.05
12 0.01 19,278 652 16,386 554 14,458 428 13,494 342
14 0.008 18,144 533 15,422 453 13,608 342 12,701 266
16 0.006 18,144 533 15,422 453 13,608 342 12,701 266
20 0.004 13,608 399 11,567 315 10,206 257 9,526 200
1.2
4 0.03 28,868 1,154 24,538 928 21,651 727 20,208 594
6 0.03 28,868 1,154 24,538 928 21,651 727 20,208 594
8 0.022 24,640 962 20,944 791 18,480 620 17,248 506
10 0.015 20,412 770 17,350 655 15,309 514 14,288 419
0.1
12 0.012 19,278 652 16,386 554 14,458 428 13,494 342
14 0.01 18,144 533 15,422 453 13,608 342 12,701 266
16 0.01 18,144 533 15,422 453 13,608 342 12,701 266
20 0.006 13,608 399 11,567 315 10,206 257 9,526 200
4 0.05 28,868 1,154 24,538 928 21,651 727 20,208 594
6 0.05 28,868 1,154 24,538 928 21,651 727 20,208 594
8 0.037 24,640 962 20,944 791 18,480 620 17,248 506
10 0.025 20,412 770 17,350 655 15,309 514 14,288 419
0.2
12 0.02 19,278 651 16,386 554 14,458 428 13,494 342
14 0.016 18,144 533 15,422 453 13,608 342 12,701 266
16 0.016 18,144 533 15,422 453 13,608 342 12,701 266
20 0.01 13,608 399 11,567 315 10,206 257 9,526 200
438 KORLOY
ESRR712 series
Workpiece
180~250HB HRC35~45 HRC45~55 HRC55~65
4 0.05 28,868 1,154 24,538 928 21,651 727 20,208 594

6 0.05 28,868 1,154 24,538 928 21,651 727 20,208 594
8 0.037 24,640 962 20,944 791 18,480 620 17,248 506
10 0.025 20,412 770 17,350 655 15,309 514 14,288 419
1.2 0.3
12 0.02 19,278 651 16,386 554 14,458 428 13,494 342
14 0.016 18,144 533 15,422 453 13,608 342 12,701 266
16 0.016 18,144 533 15,422 453 13,608 342 12,701 266
20 0.01 13,608 399 11,567 315 10,206 257 9,526 200
4 0.013 24,930 1,130 20,956 947 18,711 752 17,364 611
6 0.01 23,779 1,074 20,382 921 17,834 716 16,560 582
8 0.008 22,680 1,027 19,278 873 17,010 685 15,876 559
10 0.006 20,412 924 17,350 785 15,309 616 14,288 503
0.02
12 0.005 18,144 822 15,422 698 13,608 548 12,701 447
14 0.004 14,112 568 11,995 423 10,584 373 9,878 298
16 0.004 14,112 568 11,995 423 10,584 373 9,878 298
20 0.003 14,112 568 11,995 423 10,584 373 9,878 298
4 0.027 24,930 1,130 20,956 947 18,711 752 17,364 611
6 0.017 23,779 1,074 20,382 921 17,834 716 16,560 582
8 0.016 22,680 1,027 19,278 873 17,010 685 15,876 559
10 0.011 20,412 924 17,350 785 15,309 616 14,288 503
0.05
12 0.01 18,144 822 15,422 698 13,608 548 12,701 447
14 0.008 14,112 568 11,995 423 10,584 373 9,878 298
16 0.006 14,112 568 11,995 423 10,584 373 9,878 298
20 0.004 14,112 568 11,995 423 10,584 373 9,878 298
4 0.042 24,930 1,130 20,956 947 18,711 752 17,364 611
6 0.04 23,779 1,074 20,382 921 17,834 716 16,560 582
1.5
8 0.036 22,680 1,027 19,278 873 17,010 685 15,876 559
10 0.036 20,412 924 17,350 785 15,309 616 14,288 503
0.1
12 0.036 18,144 822 15,422 698 13,608 548 12,701 447
14 0.023 14,112 568 11,995 423 10,584 373 9,878 298
16 0.023 14,112 568 11,995 423 10,584 373 9,878 298
20 0.018 14,112 568 11,995 423 10,584 373 9,878 298
4 0.07 24,930 1,130 20,956 868 18,711 678 17,364 556
6 0.065 23,779 1,074 20,382 921 17,834 716 16,560 582
8 0.06 22,680 1,027 19,278 873 17,010 685 15,876 559
10 0.06 20,412 924 17,350 785 15,309 616 14,288 503
0.2
12 0.06 18,144 822 15,422 698 13,608 548 12,701 447
14 0.038 14,112 568 11,995 423 10,584 373 9,878 298
16 0.038 14,112 568 11,995 423 10,584 373 9,878 298
20 0.03 14,112 568 11,995 423 10,584 373 9,878 298
4 0.07 24,930 1,130 20,956 868 18,711 678 17,364 556
6 0.065 23,779 1,074 20,382 921 17,834 716 16,560 582
0.3
8 0.06 22,680 1,027 19,278 873 17,010 685 15,876 559
10 0.06 20,412 924 17,350 785 15,309 616 14,288 503
KORLOY
Y 439
H-Star Endmill
ESRR712 series
Workpiece
180~250HB HRC35~45 HRC45~55 HRC55~65
12 0.06 18,144 822 15,422 698 13,608 548 12,701 447

14 0.038 14,112 568 11,995 423 10,584 373 9,878 298
0.3
16 0.038 14,112 568 11,995 423 10,584 373 9,878 298
20 0.03 14,112 568 11,995 423 10,584 373 9,878 298
4 0.085 24,930 1,130 20,956 868 18,711 678 17,364 556
6 0.08 23,779 1,074 20,382 921 17,834 716 16,560 582
1.5
8 0.07 22,680 1,027 19,278 873 17,010 685 15,876 559
10 0.067 20,412 924 17,350 785 15,309 616 14,288 503
0.5
12 0.065 18,144 822 15,422 698 13,608 548 12,701 447
14 0.045 14,112 568 11,995 423 10,584 373 9,878 298
16 0.045 14,112 568 11,995 423 10,584 373 9,878 298
20 0.035 14,112 568 11,995 423 10,584 373 9,878 298
6 0.013 20,790 1,635 17,672 1,389 15,593 981 14,553 801
8 0.01 18,900 1,486 16,065 1,263 14,175 892 13,230 728
10 0.008 17104 1284 14539 1092 12828 807 11973 659
12 0.006 15,309 1,083 13,013 921 11,482 722 10,716 590
0.02
14 0.005 14,458 1023 12,290 869 10,844 682 10,121 557
16 0.004 13,608 963 11,567 818 10,206 642 9,526 524
20 0.004 11,907 843 10,121 716 8,930 562 8,335 459
25 0.003 11,907 757 10,121 643 8,930 505 8,335 411
6 0.027 20,790 1,635 17,672 1,389 15,593 981 14,553 801
8 0.017 18,900 1,486 16,065 1,263 14,175 892 13,230 728
10 0.016 17104 1284 14539 1092 12828 807 11973 659
12 0.011 15,309 1,083 13,013 921 11,482 722 10,716 590
0.05
14 0.01 14,458 1023 12,290 869 10,844 682 10,121 557
16 0.008 13,608 963 11,567 818 10,206 642 9,526 524
20 0.006 11,907 843 10,121 716 8,930 562 8,335 459
25 0.004 11,907 757 10,121 643 8,930 505 8,335 411
6 0.07 20,790 1,635 17,672 1,389 15,593 981 14,553 801
8 0.055 18,900 1,486 16,065 1,263 14,175 892 13,230 728
10 0.042 17104 1284 14539 1092 12828 807 11973 659
12 0.03 15,309 1,083 13,013 921 11,482 722 10,716 590
0.1 14 0.03 14,458 1023 12,290 869 10,844 682 10,121 557
16 0.03 13,608 963 11,567 818 10,206 642 9,526 524
20 0.025 11,907 843 10,121 716 8,930 562 8,335 459
25 0.015 11,907 757 10,121 643 8,930 505 8,335 411
30 0.01 11,312 719 9,615 611 8,484 480 7,918 391
6 0.08 20,790 1,635 17,672 1,389 15,593 981 14,553 801
8 0.07 18,900 1,486 16,065 1,263 14,175 892 13,230 728
10 0.055 17,104 1,284 14,539 1,092 12,828 807 11,973 659
0.2 12 0.04 15,309 1,083 13,013 921 11,482 722 10,716 590
14 0.04 14,458 1,023 12,290 869 10,844 682 10,121 557
16 0.04 13,608 963 11,567 818 10,206 642 9,526 524
20 0.035 11,907 843 10,121 716 8,930 562 8,335 459
440 KORLOY
ESRR712 series
Workpiece
180~250HB HRC35~45 HRC45~55 HRC55~65
25 0.025 11,907 757 10,121 643 8,930 505 8,335 411

0.2
30 0.017 11,312 719 9,615 611 8,484 480 7,918 391
6 0.11 20,790 1,635 17,672 1,389 15,593 981 14,553 801
8 0.09 18,900 1,486 16,065 1,263 14,175 892 13,230 728
10 0.075 17,104 1,284 14,539 1,092 12,828 807 11,973 659
12 0.06 15,309 1,083 13,013 921 11,482 722 10,716 590
0.3 14 0.06 14,458 1023 12,290 869 10,844 682 10,121 557
16 0.06 13,608 963 11,567 818 10,206 642 9,526 524
20 0.037 11,907 843 10,121 716 8,930 562 8,335 459
25 0.03 11,907 757 10,121 643 8,930 505 8,335 411
2
30 0.021 11,312 719 9,615 611 8,484 480 7,918 391
6 0.17 20,790 1,635 17,672 1,389 15,593 981 14,553 801
8 0.14 18,900 1,486 16,065 1,263 14,175 892 13,230 728
10 0.11 17,104 1284 14,539 1143 12,828 807 11,973 659
12 0.08 15,309 1,083 13,013 1,023 11,482 722 10,716 590
0.5 14 0.08 14,458 1023 12,290 920 1,084 682 10,121 557
16 0.08 13,608 963 11,567 818 10,206 642 9,526 524
20 0.05 11,907 843 10,121 716 8,930 562 8,335 459
25 0.05 11,907 757 10,121 643 8,930 505 8,335 411
30 0.03 11,312 719 9,615 611 8,484 480 7,918 391
10 0.055 18,900 1,486 16,065 1,263 14,175 892 13,230 728
16 0.042 16,254 1224 13,816 1040 12,190 767 11,378 626
0.1 20 0.03 13,608 963 11,567 818 10,206 642 9,526 524
25 0.022 12,757 860 10,844 730 9,568 573 8,930 467
30 0.015 11,907 757 10,121 643 8,930 505 8,335 411
10 0.07 18,900 1,486 16,065 1,263 14,175 892 13,230 728
0.2 16 0.055 16,254 1,224 1,386 1040 12,190 767 11,378 626
2.5
20 0.04 13,608 963 11,567 818 10,206 642 9,526 524
10 0.09 18,900 1,486 16,065 1,263 14,175 892 13,230 728
0.3 16 0.075 16,254 1,224 1,386 1040 12,190 767 11,378 626
20 0.06 13,608 963 11,567 818 10,206 642 9,526 524
10 0.14 18,900 1,486 16,065 1,263 14,175 892 13,230 728
0.5 16 0.11 16,254 1,224 1,386 1040 12,190 767 11,378 626
20 0.08 13,608 963 11,567 818 10,206 642 9,526 524
10 0.06 14,400 1,415 12,240 1,203 10,800 849 10,080 693
12 0.05 14,400 1,415 12,240 1,203 10,800 849 10,080 693
16 0.035 14,400 1,415 12,240 1,203 10,800 849 10,080 693
20 0.035 11,664 1,146 9,914 974 8,748 687 8,165 561
0.1
25 0.031 10,368 973 8,812 827 7,776 583 7,257 477
3
30 0.027 9,072 801 7,711 681 6,804 480 6,350 393
35 0.02 9,072 801 7,711 681 6,804 480 6,350 393
40 0.015 9,072 801 7,711 681 6,804 480 6,350 393
10 0.08 14,400 1,415 12,240 1,203 10,800 849 10,080 693
0.2
12 0.07 14,400 1,415 12,240 1,203 10,800 849 10,080 693
KORLOY
Y 441
H-Star Endmill
ESRR712 series
Workpiece
180~250HB HRC35~45 HRC45~55 HRC55~65
16 0.05 14,400 1,415 12,240 1,203 10,800 849 10,080 693

20 0.05 11,664 1,146 9,914 974 8,748 687 8,165 561
25 0.045 10,368 973 8,812 827 7,776 583 7,257 477
0.2
30 0.04 9,072 801 7,711 681 6,804 480 6,350 393
35 0.035 9,072 801 7,711 681 6,804 480 6,350 393
40 0.03 9,072 801 7,711 681 6,804 480 6,350 393
10 0.115 14,400 1,415 12,240 1,203 10,800 849 10,080 693
12 0.1 14,400 1,415 12,240 1,203 10,800 849 10,080 693
16 0.075 14,400 1,415 12,240 1,203 10,800 849 10,080 693
20 0.075 11,664 1,146 9,914 974 8,748 687 8,165 561
0.3
25 0.067 10,368 973 8,812 827 7,776 583 7,257 477
30 0.06 9,072 801 7,711 681 6,804 480 6,350 393
35 0.05 9,072 801 7,711 681 6,804 480 6,350 393
40 0.04 9,072 801 7,711 681 6,804 480 6,350 393
10 0.155 14,400 1,415 12,240 1,203 10,800 849 10,080 693
3
12 0.13 14,400 1,415 12,240 1,203 10,800 849 10,080 693
16 0.1 14,400 1,415 12,240 1,203 10,800 849 10,080 693
20 0.1 11,664 1,146 9,914 974 8,748 687 8,165 561
0.5
25 0.09 10,368 973 8,812 827 7,776 583 7,257 477
30 0.08 9,072 801 7,711 681 6,804 480 6,350 393
35 0.065 9,072 801 7,711 681 6,804 480 6,350 393
40 0.05 9,072 801 7,711 681 6,804 480 6,350 393
10 0.175 14,400 1,415 12,240 1,203 10,800 849 10,080 693
12 0.15 14,400 1,415 12,240 1,203 10,800 849 10,080 693
16 0.12 14,400 1,415 12,240 1,203 10,800 849 10,080 693
20 0.11 11,664 1,146 9,914 974 8,748 687 8,165 561
1
25 0.1 10,368 973 8,812 827 7,776 583 7,257 477
30 0.09 9,072 801 7,711 681 6,804 480 6,350 393
35 0.075 9,072 801 7,711 681 6,804 480 6,350 393
40 0.06 9,072 801 7,711 681 6,804 480 6,350 393
12 0.065 11,213 1,950 9,531 1,658 8,410 1,170 7,849 956
16 0.06 10,255 1,783 8,697 1,512 7,599 1,057 6,684 814
20 0.055 10,255 1,783 8,697 1,512 7,599 1,057 6,684 814
0.1 25 0.05 10,255 1,783 7,782 1293 6,545 872 5,904 687
30 0.045 10,255 1,783 6,867 1,075 5,491 688 5,124 561
35 0.04 10,255 1,783 6,867 1,075 5,491 688 5,124 561
40 0.035 10,255 1,783 6,867 1,075 5,491 688 5,124 561
4
12 0.14 11,213 1,950 9,531 1,658 8,410 1,170 7,849 956
16 0.13 10,255 1,783 8,697 1,512 7,599 1,057 6,684 814
20 0.11 10,255 1,783 8,697 1,512 7,599 1,057 6,684 814
0.2 25 0.105 10,255 1,783 7,782 1293 6,545 872 5,904 687
30 0.1 10,255 1,783 6,867 1,075 5,491 688 5,124 561
35 0.08 10,255 1,783 6,867 1,075 5,491 688 5,124 561
40 0.07 9,247 1,429 6,225 901 5,217 602 4,621 459
442 KORLOY
ESRR712 series
Workpiece
180~250HB HRC35~45 HRC45~55 HRC55~65
12 0.22 11,213 1,950 9,531 1,658 8,410 1,170 7,849 956

16 0.2 10,255 1,783 8,697 1,512 7,599 1,057 6,684 814
20 0.18 10,255 1,783 8,697 1,512 7,599 1,057 6,684 814
0.3 25 0.17 10,255 1,783 7,782 1293 6,545 872 5,904 687
30 0.16 10,255 1,783 6,867 1,075 5,491 688 5,124 561
35 0.14 10,255 1,783 6,867 1,075 5,491 688 5,124 561
40 0.13 9,247 1,429 6,225 901 5,217 602 4,621 459
12 0.35 11,213 1,950 9,531 1,658 8,410 1,170 7,849 956
16 0.25 10,255 1,783 8,697 1,512 7,599 1,057 6,684 814
20 0.2 10,255 1,783 8,697 1,512 7,599 1,057 6,684 814
4 0.5 25 0.175 10,255 1,783 7,782 1293 6,545 872 5,904 687
30 0.15 10,255 1,783 6,867 1,075 5,491 688 5,124 561
35 0.1 10,255 1,783 6,867 1,075 5,491 688 5,124 561
40 0.075 9,247 1,429 6,225 901 5,217 602 4,621 459
12 0.4 11,213 1,950 9,531 1,658 8,410 1,170 7,849 956
16 0.29 10,255 1,783 8,697 1,512 7,599 1,057 6,684 814
20 0.23 10,255 1,783 8,697 1,512 7,599 1,057 6,684 814
1 25 0.2 10,255 1,783 7,782 1293 6,545 872 5,904 687
30 0.17 10,255 1,783 6,867 1,075 5,491 688 5,124 561
35 0.12 10,255 1,783 6,867 1,075 5,491 688 5,124 561
40 0.09 9,247 1,429 6,225 901 5,217 602 4,621 459
15 0.16 9,154 1,990 7,781 1,692 6,866 1,194 6,408 975
25 0.152 8,513 1813 7,236 1541 6,385 1088 5,959 888
0.2
30 0.145 7,872 1637 6,691 1391 5,904 982 5,510 802
40 0.13 6,590 1,284 5,602 1,091 4,943 770 4,613 629
15 0.35 9,154 1,990 7,781 1,692 6,866 1,194 6,408 975
25 0.296 8,513 1813 7,236 1541 6,385 1088 5,959 888
5 0.5
30 0.24 7,872 1637 6,691 1391 5,904 982 5,510 802
40 0.135 6,590 1,284 5,602 1,091 4,943 770 4,613 629
15 0.4 9,154 1,990 7,781 1,692 6,866 1,194 6,408 975
25 0.337 8,513 1813 7,236 1541 6,385 1088 5,959 888
1
30 0.275 7,872 1637 6,691 1391 5,904 982 5,510 802
40 0.15 6,590 1,284 5,602 1,091 4,943 770 4,613 629
20 0.065 7,630 1,991 6,486 1,692 5,722 1,194 5,342 975
0.1
40 0.05 6,486 1,523 5,513 1,294 4,865 914 4,540 746
20 0.14 7,630 1,991 6,486 1,692 5,722 1,194 5,342 975
0.2
40 0.11 6,486 1,523 5,513 1,294 4,865 914 4,540 746
20 0.22 7,630 1,991 6,486 1,692 5,722 1,194 5,342 975
0.3
40 0.18 6,486 1,523 5,513 1,294 4,865 914 4,540 746
6
20 0.35 7,630 1,991 6,486 1,692 5,722 1,194 5,342 975
0.5
40 0.24 6,486 1,523 5,513 1,294 4,865 914 4,540 746
20 0.4 7,630 1,991 6,486 1,692 5,722 1,194 5,342 975
1
40 0.28 6,486 1,523 5,513 1,294 4,865 914 4,540 746
20 0.45 7,630 1,991 6,486 1,692 5,722 1,194 5,342 975
1.5
40 0.3 6,486 1,523 5,513 1,294 4,865 914 4,540 746
KORLOY
Y 443
H-Star Endmill
ESRR712 series
Workpiece
180~250HB HRC35~45 HRC45~55 HRC55~65
0.2 22 0.35 5,730 1900 4,524 1483 3,016 914 2,320 584
0.3 22 0.5 5,730 1900 4,524 1483 3,016 914 2,320 584
8 0.5 22 0.6 5,730 1900 4,524 1483 3,016 914 2,320 584
1 22 0.7 5,730 1900 4,524 1483 3,016 914 2,320 584
1.5 22 0.8 5,730 1900 4,524 1483 3,016 914 2,320 584
0.2 24 0.4 4,524 1728 3,567 1396 2,378 849 1,856 544
0.3 24 0.5 4,524 1728 3,567 1396 2,378 849 1,856 544
0.5 24 0.6 4,524 1728 3,567 1396 2,378 849 1,856 544
10
1 24 0.7 4,524 1728 3,567 1396 2,378 849 1,856 544
1.5 24 0.8 4,524 1728 3,567 1396 2,378 849 1,856 544
2 24 0.9 4,524 1728 3,567 1396 2,378 849 1,856 544
0.2 26 0.5 3,857 1728 3,045 1396 2,030 849 1,537 544
0.3 26 0.6 3,857 1728 3,045 1396 2,030 849 1,537 544
0.5 26 0.7 3,857 1728 3,045 1396 2,030 849 1,537 544
12 1 26 0.8 3,857 1728 3,045 1396 2,030 849 1,537 544
1.5 26 0.9 3,857 1728 3,045 1396 2,030 849 1,537 544
2 26 1 3,857 1728 3,045 1396 2,030 849 1,537 544
3 26 1 3,857 1728 3,045 1396 2,030 849 1,537 544
0.5 35 2 2,842 1,512 2,262 1209 1,508 748 1,160 480
16
1 35 2 2,842 453 2,262 362 1,508 224 1,160 480
t Please adjust the cutting depth index according to the cutting depth factors of above table.
t In actual machining, the condition should be adjusted according to the machining shape, purpose and machine type.
t If RPM of the machine is low, the feed rate should be low in the same ratio as RPM.
444 KORLOY
ESRR714 series
Workpiece
180~250HB HRC35~45 HRC45~55 HRC55~65
2 0.023 50,000 1257 40,000 649 30,000 529 28,000 441

4 0.017 40,000 1008 32,000 529 24,000 390 20,000 327
0.05
6 0.008 28,800 672 19,400 364 18,000 350 15,000 280
8 0.007 28,800 672 19,400 364 18,000 350 15,000 280
0.5
2 0.03 50,000 1257 40,000 649 30,000 529 28,000 441
4 0.02 40,000 1008 32,000 529 24,000 390 20,000 327
0.1
6 0.013 28,800 672 19,400 364 18,000 350 15,000 280
8 0.01 28,800 672 19,400 364 18,000 350 15,000 280
2 0.028 50,000 1622 37,830 840 28,200 546 23,000 448
4 0.019 40,000 1,162 27,800 616 23,600 392 21,000 322
0.05
6 0.012 24,000 686 18,000 420 17,800 336 15,000 294
8 0.01 24,000 652 18,000 399 17,800 319 15,000 280
0.6
2 0.035 50,000 1622 37,830 840 28,200 546 23,000 448
4 0.024 40,000 1,162 27,800 616 23,600 392 21,000 322
0.1
6 0.015 24,000 686 18,000 420 17,800 336 15,000 294
8 0.013 24,000 652 18,000 399 17,800 319 15,000 280
2 0.028 49,200 1,475 34,190 781 29,030 497 25,830 408
4 0.019 40,000 1,162 27,800 616 23,600 392 21,000 322
0.05
6 0.012 24,000 686 18,000 420 17,800 336 15,000 294
8 0.01 24,000 686 18,000 420 17,800 336 15,000 294
0.7
2 0.042 49,200 1,475 34,190 781 29,030 497 25,830 408
4 0.029 40,000 1,162 27,800 616 23,600 392 21,000 322
0.1
6 0.018 24,000 686 18,000 420 17,800 336 15,000 294
8 0.015 24,000 686 18,000 420 17,800 336 15,000 294
2 0.016 48,000 1929 28,000 905 20,000 560 360 504
4 0.016 48,000 1,542 28,000 725 20,000 448 288 403
6 0.013 38,700 1,120 25,000 645 18,000 403 256 358
0.02
8 0.011 29,025 840 20,000 516 16,200 362 230 322
10 0.01 29,025 798 20,000 490 16,200 344 219 306
12 0.09 29,025 798 20,000 490 16,200 344 219 306
2 0.038 48,000 1929 28,000 905 20,000 560 360 504
4 0.026 48,000 1,542 28,000 725 20,000 448 288 403
6 0.015 38,700 1,120 25,000 645 18,000 403 256 358
0.8 0.05
8 0.012 29,025 840 20,000 516 16,200 362 230 322
10 0.011 29,025 798 20,000 490 16,200 344 219 306
12 0.01 29,025 798 20,000 490 16,200 344 219 306
2 0.047 48,000 1929 28,000 905 20,000 560 360 504
4 0.032 48,000 1,542 28,000 725 20,000 448 288 403
6 0.019 38,700 1,120 25,000 645 18,000 403 256 358
0.1
8 0.015 29,025 840 20,000 516 16,200 362 230 322
10 0.013 29,025 798 20,000 490 16,200 344 219 306
12 0.012 29,025 798 20,000 490 16,200 344 219 306
4 0.013 32,400 1902 27,540 1454 24,300 1141 22,680 932
1 0.02
6 0.01 26,244 1386 22,307 1178 19,683 924 18,371 754
KORLOY
Y 445
H-Star Endmill
ESRR714 series
Workpiece
180~250HB HRC35~45 HRC45~55 HRC55~65
8 0.008 23,328 1232 19,829 1047 17,496 821 16,330 670

10 0.006 20,412 1,078 17,350 917 15,309 719 14,288 586
12 0.005 18,144 852 15,422 634 13,608 558 12,701 448
0.02
14 0.004 18,144 746 15,422 588 13,608 478 12,701 372
16 0.004 18,144 746 15,422 588 13,608 478 12,701 372
20 0.003 13,608 558 11,567 441 10,206 359 9,526 280
3 0.027 32,400 1902 27,540 1454 24,300 1141 22,680 932
4 0.027 32,400 1902 27,540 1454 24,300 1141 22,680 932
6 0.017 26,244 1386 22,307 1178 19,683 924 18,371 754
8 0.016 23,328 1232 19,829 1047 17,496 821 16,330 670
0.05 10 0.011 20,412 1,078 17,350 917 15,309 719 14,288 586
12 0.01 18,144 852 15,422 634 13,608 558 12,701 448
14 0.008 18,144 746 15,422 588 13,608 478 12,701 372
16 0.006 18,144 746 15,422 588 13,608 478 12,701 372
20 0.004 13,608 558 11,567 441 10,206 359 9,526 280
3 0.038 32,400 1902 27,540 1454 24,300 1141 22,680 932
4 0.038 32,400 1902 27,540 1454 24,300 1141 22,680 932
6 0.024 26,244 1386 22,307 1178 19,683 924 18,371 754
8 0.024 23,328 1232 19,829 1047 17,496 821 16,330 670
0.1 10 0.015 20,412 1,078 17,350 917 15,309 719 14,288 586
12 0.015 18,144 852 15,422 634 13,608 558 12,701 448
1
14 0.012 18,144 746 15,422 588 13,608 478 12,701 372
16 0.009 18,144 746 15,422 588 13,608 478 12,701 372
20 0.006 13,608 558 11,567 441 10,206 359 9,526 280
3 0.07 32,400 1902 27,540 1454 24,300 1141 22,680 932
4 0.07 32,400 1902 27,540 1454 24,300 1141 22,680 932
6 0.04 26,244 1386 22,307 1178 19,683 924 18,371 754
8 0.04 23,328 1232 19,829 1047 17,496 821 16,330 670
0.2 10 0.025 20,412 1,078 17,350 917 15,309 719 14,288 586
12 0.025 18,144 852 15,422 634 13,608 558 12,701 448
14 0.02 18,144 746 15,422 588 13,608 478 12,701 372
16 0.015 18,144 746 15,422 588 13,608 478 12,701 372
20 0.01 13,608 558 11,567 441 10,206 359 9,526 280
3 0.07 32,400 1902 27,540 1454 24,300 1141 22,680 932
4 0.07 32,400 1902 27,540 1454 24,300 1141 22,680 932
6 0.04 26,244 1386 22,307 1178 19,683 924 18,371 754
8 0.04 23,328 1232 19,829 1047 17,496 821 16,330 670
0.3 10 0.025 20,412 1,078 17,350 917 15,309 719 14,288 586
12 0.025 18,144 852 15,422 634 13,608 558 12,701 448
14 0.02 18,144 746 15,422 588 13,608 478 12,701 372
16 0.015 18,144 746 15,422 588 13,608 478 12,701 372
20 0.01 13,608 558 11,567 441 10,206 359 9,526 280
4 0.013 28,868 1,615 24,538 1,299 21,651 1017 20,208 831
1.2 0.02
6 0.01 28,868 1,615 24,538 1,299 21,651 1,017 20,208 831
446 KORLOY
ESRR714 series
Workpiece
180~250HB HRC35~45 HRC45~55 HRC55~65
8 0.008 24,640 1,346 20,944 1,107 18,480 868 17,248 708

10 0.006 20,412 1,078 17,350 917 15,309 719 14,288 586
12 0.005 19,278 912 16,386 775 14,458 599 13,494 478
0.02
14 0.004 18,144 746 15,422 634 13,608 478 12,701 372
16 0.004 18,144 746 15,422 634 13,608 478 12,701 372
20 0.003 13,608 558 11,567 441 10,206 359 9,526 280
3 0.027 28,868 1,615 24,538 1,299 21,651 1017 20,208 831
4 0.027 28,868 1,615 24,538 1,299 21,651 1017 20,208 831
6 0.017 28,868 1,615 24,538 1,299 21,651 1,017 20,208 831
8 0.016 24,640 1,346 20,944 1,107 18,480 868 17,248 708
0.05 10 0.011 20,412 1,078 17,350 917 15,309 719 14,288 586
12 0.01 19,278 912 16,386 775 14,458 599 13,494 478
14 0.008 18,144 746 15,422 634 13,608 478 12,701 372
16 0.006 18,144 746 15,422 634 13,608 478 12,701 372
20 0.004 13,608 558 11,567 441 10,206 359 9,526 280
3 0.03 28,868 1,615 24,538 1,299 21,651 1017 20,208 831
4 0.03 28,868 1,615 24,538 1,299 21,651 1017 20,208 831
6 0.03 28,868 1,615 24,538 1,299 21,651 1,017 20,208 831
8 0.022 24,640 1,346 20,944 1,107 18,480 868 17,248 708
0.1 10 0.015 20,412 1,078 17,350 917 15,309 719 14,288 586
1.2 12 0.012 19,278 912 16,386 775 14,458 599 13,494 478
14 0.01 18,144 746 15,422 634 13,608 478 12,701 372
16 0.01 18,144 746 15,422 634 13,608 478 12,701 372
20 0.006 13,608 558 11,567 441 10,206 359 9,526 280
3 0.05 28,868 1,615 24,538 1,299 21,651 1017 20,208 831
4 0.05 28,868 1,615 24,538 1,299 21,651 1017 20,208 831
6 0.05 28,868 1,615 24,538 1,299 21,651 1,017 20,208 831
8 0.037 24,640 1,346 20,944 1,107 18,480 868 17,248 708
0.2 10 0.025 20,412 1,078 17,350 917 15,309 719 14,288 586
12 0.02 19,278 912 16,386 775 14,458 599 13,494 478
14 0.016 18,144 746 15,422 634 13,608 478 12,701 372
16 0.016 18,144 746 15,422 634 13,608 478 12,701 372
20 0.01 13,608 558 11,567 441 10,206 359 9,526 280
3 0.05 28,868 1,615 24,538 1,299 21,651 1017 20,208 831
4 0.05 28,868 1,615 24,538 1,299 21,651 1017 20,208 831
6 0.05 28,868 1,615 24,538 1,299 21,651 1,017 20,208 831
8 0.037 24,640 1,346 20,944 1,107 18,480 868 17,248 708
0.3
10 0.025 20,412 1,078 17,350 917 15,309 719 14,288 586
12 0.02 19,278 912 16,386 775 14,458 599 13,494 478
16 0.016 18,144 746 15,422 634 13,608 478 12,701 372
20 0.01 13,608 558 11,567 441 10,206 359 9,526 280
6 0.01 23,779 1,503 20,382 1,325 17,834 1,052 16,560 855
1.5 0.02 8 0.008 22,680 1,437 19,278 1,289 17,010 1,002 15,876 814
10 0.006 20,412 1,293 17,350 1,222 15,309 959 14,288 782
KORLOY
Y 447
H-Star Endmill
ESRR714 series
Workpiece
180~250HB HRC35~45 HRC45~55 HRC55~65
12 0.005 18,144 1,150 15,422 1,099 13,608 862 12,701 704

14 0.004 14,112 795 11,995 977 10,584 767 9,878 625
0.02 16 0.004 14,112 795 11,995 592 10,584 522 9,878 417
20 0.003 14,112 795 11,995 592 10,584 522 9,878 417
22 0.003 14,112 795 11,995 592 10,584 522 9,878 417
4 0.027 24,930 1,582 20,956 1325 18,711 1052 17,364 855
6 0.017 23,779 1,503 20,382 1,325 17,834 1,052 16,560 855
8 0.016 22,680 1,437 19,278 1,289 17,010 1,002 15,876 814
10 0.011 20,412 1,293 17,350 1,222 15,309 959 14,288 782
12 0.01 18,144 1,150 15,422 1,099 13,608 862 12,701 704
0.05
14 0.008 14,112 795 11,995 977 10,584 767 9,878 625
16 0.006 14,112 795 11,995 592 10,584 522 9,878 417
20 0.004 14,112 795 11,995 592 10,584 522 9,878 417
22 0.004 14,112 795 11,995 592 10,584 522 9,878 417
26 0.003 14,112 795 11,995 592 10,584 522 9,878 417
4 0.042 24,930 1,582 20,956 1325 18,711 1052 17,364 855
6 0.04 23,779 1,503 20,382 1,325 17,834 1,052 16,560 855
8 0.036 22,680 1,437 19,278 1,289 17,010 1,002 15,876 814
10 0.036 20,412 1,293 17,350 1,222 15,309 959 14,288 782
12 0.036 18,144 1,150 15,422 1,099 13,608 862 12,701 704
0.1
14 0.023 14,112 795 11,995 977 10,584 767 9,878 625
16 0.023 14,112 795 11,995 592 10,584 522 9,878 417
1.5 20 0.018 14,112 795 11,995 592 10,584 522 9,878 417
22 0.015 14,112 795 11,995 592 10,584 522 9,878 417
26 0.01 14,112 795 11,995 592 10,584 522 9,878 417
4 0.07 24,930 1,582 20,956 1325 18,711 1052 17,364 855
6 0.065 23,779 1,503 20,382 1,325 17,834 1,052 16,560 855
8 0.06 22,680 1,437 19,278 1,289 17,010 1,002 15,876 814
10 0.06 20,412 1,293 17,350 1,222 15,309 959 14,288 782
12 0.06 18,144 1,150 15,422 1,099 13,608 862 12,701 704
0.2
14 0.038 14,112 795 11,995 977 10,584 767 9,878 625
16 0.038 14,112 795 11,995 592 10,584 522 9,878 417
20 0.03 14,112 795 11,995 592 10,584 522 9,878 417
22 0.025 14,112 795 11,995 592 10,584 522 9,878 417
25 0.02 14,112 795 11,995 592 10,584 522 9,878 417
4 0.07 24,930 1,582 20,956 1325 18,711 1052 17,364 855
6 0.065 23,779 1,503 20,382 1,325 17,834 1,052 16,560 855
8 0.06 22,680 1,437 19,278 1,289 17,010 1,002 15,876 814
10 0.06 20,412 1,293 17,350 1,222 15,309 959 14,288 782
12 0.06 18,144 1,150 15,422 1,099 13,608 862 12,701 704
0.3
14 0.038 14,112 795 11,995 977 10,584 767 9,878 625
16 0.038 14,112 795 11,995 592 10,584 522 9,878 417
20 0.03 14,112 795 11,995 592 10,584 522 9,878 417
22 0.025 14,112 795 11,995 592 10,584 522 9,878 417
25 0.02 14,112 795 11,995 592 10,584 522 9,878 417
448 KORLOY
ESRR714 series
Workpiece
180~250HB HRC35~45 HRC45~55 HRC55~65
4 0.085 24,930 1,582 20,956 1325 18,711 1052 17,364 855

6 0.08 23,779 1,503 20,382 1,325 17,834 1,052 16,560 855
8 0.07 22,680 1,437 19,278 1,289 17,010 1,002 15,876 814
10 0.067 20,412 1,293 17,350 1,222 15,309 959 14,288 782
12 0.065 18,144 1,150 15,422 1,099 13,608 862 12,701 704
1.5 0.5
14 0.045 14,112 795 11,995 977 10,584 767 9,878 625
16 0.045 14,112 795 11,995 592 10,584 522 9,878 417
20 0.035 14,112 795 11,995 592 10,584 522 9,878 417
22 0.03 14,112 795 11,995 592 10,584 522 9,878 417
25 0.025 14,112 795 11,995 592 10,584 522 9,878 417
6 0.013 20,790 2289 17,672 1944 15,593 1373 14,553 1121
8 0.01 18,900 2080 16,065 1768 14,175 1248 13,230 1019
10 0.008 17104 1797 14539 1528 12828 1129 11973 922
12 0.006 15,309 1516 13,013 1289 11,482 1010 10,716 826
0.02 14 0.005 14,458 1432 12,290 1216 10,844 954 10,121 779
16 0.004 13,608 1,348 11,567 1145 10,206 898 9,526 733
20 0.004 11,907 1180 10,121 1002 8,930 786 8,335 642
25 0.003 11,907 1059 10,121 900 8,930 707 8,335 575
30 0.003 11,312 1006 9,615 855 8,484 672 7,918 547
6 0.027 20,790 2289 17,672 1944 15,593 1373 14,553 1121
8 0.017 18,900 2080 16,065 1768 14,175 1248 13,230 1019
10 0.016 17104 1797 14539 1528 12828 1129 11973 922
12 0.011 15,309 1516 13,013 1289 11,482 1010 10,716 826
0.05 14 0.01 14,458 1432 12,290 1216 10,844 954 10,121 779
16 0.008 13,608 1,348 11,567 1145 10,206 898 9,526 733
20 0.006 11,907 1180 10,121 1002 8,930 786 8,335 642
25 0.004 11,907 1059 10,121 900 8,930 707 8,335 575
2
30 0.003 11,312 1006 9,615 855 8,484 672 7,918 547
6 0.07 20,790 2289 17,672 1944 15,593 1373 14,553 1121
8 0.055 18,900 2080 16,065 1768 14,175 1248 13,230 1019
10 0.042 17104 1797 14539 1528 12828 1129 11973 922
12 0.03 15,309 1516 13,013 1289 11,482 1010 10,716 826
14 0.03 14,458 1432 12,290 1216 10,844 954 10,121 779
0.1
16 0.03 13,608 1,348 11,567 1145 10,206 898 9,526 733
20 0.025 11,907 1180 10,121 1002 8,930 786 8,335 642
22 0.02 11,907 1059 10,121 900 8,930 707 8,335 575
25 0.015 11,907 1059 10,121 900 8,930 707 8,335 575
30 0.01 11,312 1006 9,615 855 8,484 672 7,918 547
6 0.08 20,790 2289 17,672 1944 15,593 1373 14,553 1121
8 0.07 18,900 2080 16,065 1768 14,175 1248 13,230 1019
10 0.055 17104 1797 14539 1528 12828 1129 11973 922
0.2
12 0.04 15,309 1516 13,013 1289 11,482 1010 10,716 826
14 0.04 14,458 1432 12,290 1216 10,844 954 10,121 779
16 0.04 13,608 1,348 11,567 1145 10,206 898 9,526 733
KORLOY
Y 449
H-Star Endmill
ESRR714 series
Workpiece
180~250HB HRC35~45 HRC45~55 HRC55~65
20 0.035 11,907 1180 10,121 1002 8,930 786 8,335 642

22 0.03 11,907 1059 10,121 900 8,930 707 8,335 575
0.2
25 0.025 11,907 1059 10,121 900 8,930 707 8,335 575
30 0.017 11,312 1006 9,615 855 8,484 672 7,918 547
6 0.11 20,790 2289 17,672 1944 15,593 1373 14,553 1121
8 0.09 18,900 2080 16,065 1768 14,175 1248 13,230 1019
10 0.075 17104 1797 14539 1528 12828 1129 11973 922
12 0.06 15,309 1516 13,013 1289 11,482 1010 10,716 826
14 0.06 14,458 1432 12,290 1216 10,844 954 10,121 779
0.3
16 0.06 13,608 1,348 11,567 1145 10,206 898 9,526 733
20 0.037 11,907 1180 10,121 1002 8,930 786 8,335 642
22 0.033 11,907 1059 10,121 900 8,930 707 8,335 575
2
25 0.03 11,907 1059 10,121 900 8,930 707 8,335 575
30 0.021 11,312 1006 9,615 855 8,484 672 7,918 547
6 0.17 20,790 2289 17,672 1944 15,593 1373 14,553 1121
8 0.14 18,900 2080 16,065 1768 14,175 1248 13,230 1019
10 0.11 17104 1797 14539 1528 12828 1129 11973 922
12 0.08 15,309 1516 13,013 1289 11,482 1010 10,716 826
14 0.08 14,458 1432 12,290 1216 10,844 954 10,121 779
0.5
16 0.08 13,608 1,348 11,567 1145 10,206 898 9,526 733
20 0.05 11,907 1180 10,121 1002 8,930 786 8,335 642
22 0.05 11,907 1059 10,121 900 8,930 707 8,335 575
25 0.05 11,907 1059 10,121 900 8,930 707 8,335 575
30 0.03 11,312 1006 9,615 855 8,484 672 7,918 547
8 0.06 18,900 2,080 16,065 1,768 14,175 1248 13,230 1019
10 0.055 18,900 2,080 16,065 1,768 14,175 1248 13,230 1019
12 0.051 18,018 1,958 15,315 1664 13,513 1190 12,613 1019
14 0.046 17,136 1835 14,566 1560 12,852 1132 11,995 971
0.1
16 0.042 16,254 1,713 13,816 1,456 12,190 1,073 11,378 876
20 0.03 13,608 1,348 11,567 1,145 10,206 898 9,526 733
25 0.022 12,757 1204 10,844 1022 9,568 802 8,930 653
30 0.015 11,907 1,059 10,121 900 8,930 707 8,335 575
8 0.08 18,900 2,080 16,065 1,768 14,175 1248 13,230 1019
10 0.07 18,900 2,080 16,065 1,768 14,175 1248 13,230 1019
2.5
12 0.06 18,018 1,958 15,315 1664 13,513 1190 12,613 1019
14 0.05 17,136 1835 14,566 1560 12,852 1132 11,995 971
0.2
16 0.055 16,254 1,713 13,816 1,456 12,190 1,073 11,378 876
20 0.04 13,608 1,348 11,567 1,145 10,206 898 9,526 733
25 0.03 12,757 1204 10,844 1022 9,568 802 8,930 653
30 0.02 11,907 1,059 10,121 900 8,930 707 8,335 575
8 0.1 18,900 2,080 16,065 1,768 14,175 1248 13,230 1019
10 0.09 18,900 2,080 16,065 1,768 14,175 1248 13,230 1019
0.3
12 0.085 18,018 1,958 15,315 1664 13,513 1190 12,613 1019
14 0.08 17,136 1835 14,566 1560 12,852 1132 11,995 971
450 KORLOY
ESRR714 series
Workpiece
180~250HB HRC35~45 HRC45~55 HRC55~65
16 0.075 16,254 1,713 13,816 1,456 12,190 1,073 11,378 876

20 0.06 13,608 1,348 11,567 1,145 10,206 898 9,526 733
0.3
25 0.065 12,757 1204 10,844 1022 9,568 802 8,930 653
30 0.06 11,907 1,059 10,121 900 8,930 707 8,335 575
8 0.15 18,900 2,080 16,065 1,768 14,175 1248 13,230 1019
10 0.14 18,900 2,080 16,065 1,768 14,175 1248 13,230 1019
2.5
12 0.13 18,018 1,958 15,315 1664 13,513 1190 12,613 1019
14 0.12 17,136 1835 14,566 1560 12,852 1132 11,995 971
0.5
16 0.11 16,254 1,713 13,816 1,456 12,190 1,073 11,378 876
20 0.08 13,608 1,348 11,567 1,145 10,206 898 9,526 733
25 0.07 12,757 1204 10,844 1022 9,568 802 8,930 653
30 0.05 11,907 1,059 10,121 900 8,930 707 8,335 575
8 0.07 14,400 1,981 12,240 1,684 10,800 1188 10,080 970
10 0.06 14400 1,981 12240 1,684 10800 1188 10080 970
12 0.05 14,400 1,981 12,240 1,684 10,800 1188 10,080 970
14 0.047 14,400 1,981 12,240 1,684 10,800 1188 10,080 970
16 0.035 14,400 1,981 12,240 1,684 10,800 1188 10,080 970
0.1 20 0.035 11,664 1,604 9,914 1,363 8,748 961 8,165 785
25 0.031 10368 1,362 8812.5 1,158 7776 816 7257.5 667
30 0.027 9,072 1,121 7,711 953 6,804 672 6,350 550
35 0.02 9,072 1,121 7,711 953 6,804 672 6,350 550
40 0.015 8,164 897 6,939 762 6,123 537 5,715 440
45 0.01 7,258 672 6,169 572 5,443 403 5,080 330
8 0.09 14,400 1,981 12,240 1,684 10,800 1188 10,080 970
10 0.08 14400 1,981 12240 1,684 10800 1188 10080 970
12 0.07 14,400 1,981 12,240 1,684 10,800 1188 10,080 970
14 0.06 14,400 1,981 12,240 1,684 10,800 1188 10,080 970
16 0.05 14,400 1,981 12,240 1,684 10,800 1188 10,080 970
3 0.2 20 0.05 11,664 1,604 9,914 1,363 8,748 961 8,165 785
25 0.045 10368 1,362 8812.5 1,158 7776 816 7257.5 667
30 0.04 9,072 1,121 7,711 953 6,804 672 6,350 550
35 0.035 9,072 1,121 7,711 953 6,804 672 6,350 550
40 0.03 8,164 897 6,939 762 6,123 537 5,715 440
45 0.025 7,258 672 6,169 572 5,443 403 5,080 330
8 0.13 14,400 1,981 12,240 1,684 10,800 1188 10,080 970
10 0.115 14400 1,981 12240 1,684 10800 1188 10080 970
12 0.1 14,400 1,981 12,240 1,684 10,800 1188 10,080 970
14 0.085 14,400 1,981 12,240 1,684 10,800 1188 10,080 970
16 0.075 14,400 1,981 12,240 1,684 10,800 1188 10,080 970
0.3 20 0.075 11,664 1,604 9,914 1,363 8,748 961 8,165 785
25 0.0675 10368 1,362 8812.5 1,158 7776 816 7257.5 667
30 0.06 9,072 1,121 7,711 953 6,804 672 6,350 550
35 0.05 9,072 1,121 7,711 953 6,804 672 6,350 550
40 0.04 8,164 897 6,939 762 6,123 537 5,715 440
45 0.03 7,258 672 6,169 572 5,443 403 5,080 330
KORLOY
Y 451
H-Star Endmill
ESRR714 series
Workpiece
180~250HB HRC35~45 HRC45~55 HRC55~65
8 0.18 14,400 1,981 12,240 1,684 10,800 1188 10,080 970

10 0.155 14400 1,981 12240 1,684 10800 1188 10080 970
12 0.13 14,400 1,981 12,240 1,684 10,800 1188 10,080 970
14 0.12 14,400 1,981 12,240 1,684 10,800 1188 10,080 970
16 0.1 14,400 1,981 12,240 1,684 10,800 1188 10,080 970
20 0.1 11,664 1,604 9,914 1,363 8,748 961 8,165 785
0.5
25 0.09 10368 1,362 8812.5 1,158 7776 816 7257.5 667
30 0.08 9,072 1,121 7,711 953 6,804 672 6,350 550
35 0.065 9,072 1,121 7,711 953 6,804 672 6,350 550
40 0.05 8,164 897 6,939 762 6,123 537 5,715 440
45 0.04 7,258 672 6,169 572 5,443 403 5,080 330
50 0.03 6,532 538 5,552 457 4,899 322 4,572 264
3
8 0.2 14,400 1,981 12,240 1,684 10,800 1188 10,080 970
10 0.175 14400 1,981 12240 1,684 10800 1188 10080 970
12 0.15 14,400 1,981 12,240 1,684 10,800 1188 10,080 970
14 0.13 14,400 1,981 12,240 1,684 10,800 1188 10,080 970
16 0.12 14,400 1,981 12,240 1,684 10,800 1188 10,080 970
20 0.11 11,664 1,604 9,914 1,363 8,748 961 8,165 785
1
25 0.1 10368 1,362 8812.5 1,158 7776 816 7257.5 667
30 0.09 9,072 1,121 7,711 953 6,804 672 6,350 550
35 0.075 9,072 1,121 7,711 953 6,804 672 6,350 550
40 0.06 8,164 897 6,939 762 6,123 537 5,715 440
45 0.045 7,258 672 6,169 572 5,443 403 5,080 330
50 0.03 6,532 538 5,552 457 4,899 322 4,572 264
10 0.072 11,213 2,730 9,531 2,321 8,410 1,638 7,849 1338
12 0.065 11,213 2,730 9,531 2,321 8,410 1638 7,849 1338
13 0.062 10,734 2,613 9,114 2,219 8,004 1558 7,266 1239
16 0.06 10,255 2,496 8,697 2116 7,599 1479 6,684 1139
20 0.055 10,255 2496 8,697 2,116 7,599 1479 6,884 1139
0.1 25 0.05 10,255 2,496 7,782 1,810 6,545 1,221 5,904 962
30 0.045 10,255 2,496 6,867 1,505 5,491 963 5,124 785
35 0.04 10,255 2,496 6,867 1505 5,491 963 5,124 785
40 0.035 9,247 2,000 6,225 1,262 5,217 842 4,621 643
45 0.03 8,240 1,505 5,584 1,019 4,944 722 4,119 501
4
50 0.02 7,398 1,200 4,980 757 4,174 505 3,697 385
10 0.15 11,213 2,730 9,531 2,321 8,410 1,638 7,849 1338
12 0.14 11,213 2,730 9,531 2,321 8,410 1638 7,849 1338
13 0.135 10,734 2,613 9,114 2,219 8,004 1558 7,266 1239
16 0.13 10,255 2,496 8,697 2116 7,599 1479 6,684 1139
0.2 20 0.11 10,255 2496 8,697 2,116 7,599 1479 6,884 1139
25 0.105 10,255 2,496 7,782 1,810 6,545 1,221 5,904 962
30 0.1 10,255 2,496 6,867 1,505 5,491 963 5,124 785
35 0.08 10,255 2,496 6,867 1505 5,491 963 5,124 785
40 0.07 9,247 2,000 6,225 1,262 5,217 842 4,621 643
452 KORLOY
ESRR714 series
Workpiece
180~250HB HRC35~45 HRC45~55 HRC55~65
45 0.06 8,240 1,505 5,584 1,019 4,944 722 4,119 501

0.2
50 0.05 7,398 1,200 4,980 757 4,174 505 3,697 385
10 0.23 11,213 2,730 9,531 2,321 8,410 1,638 7,849 1338
12 0.22 11,213 2,730 9,531 2,321 8,410 1638 7,849 1338
13 0.21 10,734 2,613 9,114 2,219 8,004 1558 7,266 1239
16 0.2 10,255 2,496 8,697 2116 7,599 1479 6,684 1139
20 0.18 10,255 2496 8,697 2,116 7,599 1479 6,884 1139
0.3 25 0.17 10,255 2,496 7,782 1,810 6,545 1,221 5,904 962
30 0.16 10,255 2,496 6,867 1,505 5,491 963 5,124 785
35 0.14 10,255 2,496 6,867 1505 5,491 963 5,124 785
40 0.13 9,247 2,000 6,225 1,262 5,217 842 4,621 643
45 0.12 8,240 1,505 5,584 1,019 4,944 722 4,119 501
50 0.11 7,398 1,200 4,980 757 4,174 505 3,697 385
10 0.4 11,213 2,730 9,531 2,321 8,410 1,638 7,849 1338
12 0.35 11,213 2,730 9,531 2,321 8,410 1638 7,849 1338
13 0.3 10,734 2,613 9,114 2,219 8,004 1558 7,266 1239
16 0.25 10,255 2,496 8,697 2116 7,599 1479 6,684 1139
20 0.2 10,255 2496 8,697 2,116 7,599 1479 6,884 1139
4 25 0.175 10,255 2,496 7,782 1,810 6,545 1,221 5,904 962
0.5
30 0.15 10,255 2,496 6,867 1,505 5,491 963 5,124 785
35 0.1 10,255 2,496 6,867 1505 5,491 963 5,124 785
40 0.075 9,247 2,000 6,225 1,262 5,217 842 4,621 643
45 0.05 8,240 1,505 5,584 1,019 4,944 722 4,119 501
50 0.04 7,398 1,200 4,980 757 4,174 505 3,697 385
55 0.03 6,592 9903 4,467 611 3,955 433 3,295 300
10 0.5 11,213 2,730 9,531 2,321 8,410 1,638 7,849 1338
12 0.4 11,213 2,730 9,531 2,321 8,410 1638 7,849 1338
13 0.35 10,734 2,613 9,114 2,219 8,004 1558 7,266 1239
16 0.29 10,255 2,496 8,697 2116 7,599 1479 6,684 1139
20 0.23 10,255 2496 8,697 2,116 7,599 1479 6,884 1139
25 0.2 10,255 2,496 7,782 1,810 6,545 1,221 5,904 962
1
30 0.17 10,255 2,496 6,867 1,505 5,491 963 5,124 785
35 0.12 10,255 2,496 6,867 1505 5,491 963 5,124 785
40 0.09 9,247 2,000 6,225 1,262 5,217 842 4,621 643
45 0.06 8,240 1,505 5,584 1,019 4,944 722 4,119 501
50 0.05 7,398 1,200 4,980 757 4,174 505 3,697 385
55 0.04 6,592 9903 4,467 611 3,955 433 3,295 300
16 0.08 9,154 2786 7,781 2368 6,866 1671 6,408 1365
0.1 30 0.07 7,872 2291 6,691 1948 5,904 1374 5,510 1122
40 0.06 6,590 1797 5,602 1527 4,943 1078 4,613 880
5
16 0.16 9,154 2786 7,781 2368 6,866 1671 6,408 1365
0.2 30 0.145 7,872 2291 6,691 1948 5,904 1374 5,510 1122
40 0.13 6,590 1797 5,602 1527 4,943 1078 4,613 880
KORLOY
Y 453
H-Star Endmill
ESRR714 series
Workpiece
180~250HB HRC35~45 HRC45~55 HRC55~65
16 0.24 9,154 2786 7,781 2368 6,866 1671 6,408 1365

0.3 30 0.22 7,872 2291 6,691 1948 5,904 1374 5,510 1122
40 0.2 6,590 1797 5,602 1527 4,943 1078 4,613 880
16 0.35 9,154 2786 7,781 2368 6,866 1671 6,408 1365
30 0.296 7,872 2291 6,691 1948 5,904 1374 5,510 1122
0.5 40 0.135 6,590 1797 5,602 1527 4,943 1078 4,613 880
50 0.12 5,272 1078 4,482 916 3,954 646 3,690 528
5 60 0.1 4,218 647 3,585 549 3,164 388 2,952 317
16 0.4 9,154 2786 7,781 2368 6,866 1671 6,408 1365
30 0.275 7,872 2291 6,691 1948 5,904 1374 5,510 1122
1 40 0.15 6,590 1797 5,602 1527 4,943 1078 4,613 880
50 0.13 5,272 1078 4,482 916 3,954 646 3,690 528
60 0.11 4,218 647 3,585 549 3,164 388 2,952 317
1.5 15 0.45 9,154 2786 7,781 2368 6,866 1671 6,408 1365
2 15 0.5 9,154 2786 7,781 2368 6,866 1671 6,408 1365
20 0.065 7,630 2787 6,486 2368 5,722 1671 5,432 1365
0.1 40 0.05 6,486 2132 5,513 1811 4,865 1279 4,540 1044
50 0.04 5,491 1,470 4,668 1,248 4,118 872 3,844 711
20 0.14 7,630 2787 6,486 2368 5,722 1671 5,432 1365
0.2 40 0.11 6,486 2132 5,513 1811 4,865 1279 4,540 1044
50 0.08 5,491 1,470 4,668 1,248 4,118 872 3,844 711
20 0.22 7,630 2787 6,486 2368 5,722 1671 5,432 1365
30 0.2 7,630 2787 6,486 2368 5,722 1671 5,432 1365
0.3
40 0.18 6,486 2132 5,513 1811 4,865 1279 4,540 1044
50 0.14 5,491 1,470 4,668 1,248 4,118 872 3,844 711
20 0.35 7,630 2787 6,486 2368 5,722 1671 5,432 1365
30 0.29 7,630 2787 6,486 2368 5,722 1671 5,432 1365
0.5 40 0.24 6,486 2132 5,513 1811 4,865 1279 4,540 1044
6 50 0.165 5,491 1,470 4,668 1,248 4,118 872 3,844 711
60 0.1 5,491 1,470 4,668 1,248 4,118 872 3,844 711
20 0.4 7,630 2787 6,486 2368 5,722 1671 5,432 1365
30 0.35 7,630 2787 6,486 2368 5,722 1671 5,432 1365
1 40 0.28 6,486 2132 5,513 1811 4,865 1279 4,540 1044
50 0.2 5,491 1,470 4,668 1,248 4,118 872 3,844 711
60 0.15 5,491 1,470 4,668 1,248 4,118 872 3,844 711
20 0.45 7,630 2787 6,486 2368 5,722 1671 5,432 1365
1.5 40 0.4 6,486 2132 5,513 1811 4,865 1279 4,540 1044
50 0.3 5,491 1,470 4,668 1,248 4,118 872 3,844 711
20 0.5 7,630 2787 6,486 2368 5,722 1671 5,432 1365
30 0.4 7,630 2787 6,486 2368 5,722 1671 5,432 1365
2
40 0.3 6,486 2132 5,513 1811 4,865 1279 4,540 1044
50 0.2 5,491 1,470 4,668 1,248 4,118 872 3,844 711
454 KORLOY
ESRR714 series
Workpiece
180~250HB HRC35~45 HRC45~55 HRC55~65
0.1 25 0.35 5,730 2660 4,524 2076 3,016 1279 2,320 817
22 0.5 5,730 2660 4,524 2076 3,016 1279 2,320 817
0.2
40 0.25 5,730 2660 4,524 2076 3,016 1279 2,320 817
22 0.6 5,730 2660 4,524 2076 3,016 1279 2,320 817
0.3
40 0.3 5,730 2660 4,524 2076 3,016 1279 2,320 817
22 0.7 5,730 2660 4,524 2076 3,016 1279 2,320 817
35 0.5 5,730 2660 4,524 2076 3,016 1279 2,320 817
0.5 40 0.35 5,730 2660 4,524 2076 3,016 1279 2,320 817
50 0.3 4,584 1596 3,619 1245 2,413 767 1,856 490
60 0.25 4,584 1596 3,619 1245 2,413 767 1,856 490
8
22 0.8 5,730 2660 4,524 2076 3,016 1279 2,320 817
35 0.6 5,730 2660 4,524 2076 3,016 1279 2,320 817
1 40 0.4 5,730 2660 4,524 2076 3,016 1279 2,320 817
50 0.4 4,584 1596 3,619 1245 2,413 767 1,856 490
60 0.3 4,584 1596 3,619 1245 2,413 767 1,856 490
22 0.9 5,730 2660 4,524 2076 3,016 1279 2,320 817
1.2
40 0.45 5,730 2660 4,524 2076 3,016 1279 2,320 817
22 1 5,730 2660 4,524 2076 3,016 1279 2,320 817
2 40 0.5 5,730 2660 4,524 2076 3,016 1279 2,320 817
50 0.4 4,584 1596 3,619 1245 2,413 767 1,856 490
0.1 30 0.4 4,524 2419 3,567 1954 2,378 1188 1,856 761
24 0.5 4,524 2419 3,567 1954 2,378 1188 1,856 761
0.2
40 0.25 4,524 2419 3,567 1954 2,378 1188 1,856 761
24 0.6 4,524 2419 3,567 1954 2,378 1188 1,856 761
0.3
40 0.3 4,524 2419 3,567 1954 2,378 1188 1,856 761
24 0.7 4,524 2419 3,567 1954 2,378 1188 1,856 761
40 0.4 4,524 2419 3,567 1954 2,378 1188 1,856 761
0.5
50 0.3 3,619 1451 2,854 1172 1,902 713 1,485 456
60 0.2 3,619 1451 2,854 1172 1,902 713 1,485 456
10 24 0.8 4,524 2419 3,567 1954 2,378 1188 1,856 761
40 0.5 4,524 2419 3,567 1954 2,378 1188 1,856 761
1
50 0.4 3,619 1451 2,854 1172 1,902 713 1,485 456
60 0.3 3,619 1451 2,854 1172 1,902 713 1,485 456
24 0.9 4,524 2419 3,567 1954 2,378 1188 1,856 761
1.5
40 0.55 4,524 2419 3,567 1954 2,378 1188 1,856 761
24 1 4,524 2419 3,567 1954 2,378 1188 1,856 761
2 40 0.5 3,619 1451 2,854 1172 1,902 713 1,485 456
50 0.4 2,895 870 2,283 703 1,522 427 1,188 274
2.5 24 1.1 4,524 2419 3,567 1954 2,378 1188 1,856 761
0.2 32 0.5 3,857 2419 3,045 1954 2,030 1188 1,537 761
26 0.6 3,857 2419 3,045 1954 2,030 1188 1,537 761
0.3
12 45 0.3 3,857 2419 3,045 1954 2,030 1188 1,537 761
26 0.7 3,857 2419 3,045 1954 2,030 1188 1,537 761
0.5
40 0.4 3,857 2419 3,045 1954 2,030 1188 1,537 761
KORLOY
Y 455
H-Star Endmill
ESRR714 series
Workpiece
180~250HB HRC35~45 HRC45~55 HRC55~65
0.5 60 0.3 3,086 1451 2,436 1172 1,624 713 1,230 456
26 0.8 3,857 2419 3,045 1954 2,030 1188 1,537 761
1 40 0.5 3,857 2419 3,045 1954 2,030 1188 1,537 761
60 0.3 3,086 1451 2,436 1172 1,624 713 1,230 456
12
1.5 26 0.9 3,857 2419 3,045 1954 2,030 1188 1,537 761
26 1 3,857 2419 3,045 1954 2,030 1188 1,537 761
2
40 0.5 3,857 2419 3,045 1954 2,030 1188 1,537 761
3 26 1 3,857 2419 3,045 1954 2,030 1188 1,537 761
35 2 2,842 2116 2,262 1692 1,508 1047 1,160 672
0.5
50 1 2,842 2116 2,262 1692 1,508 1047 1,160 672
16
35 2 2,842 2116 2,262 1692 1,508 1047 1,160 672
1
50 1 2,842 2116 2,262 1692 1,508 1047 1,160 672
40 2 2,262 1915 1,798 1512 1,189 957 928 616
0.5
55 1 2,262 1915 1,798 1512 1,189 957 928 616
20
40 2 2,262 1915 1,798 1512 1,189 957 928 616
1
55 1 2,262 1915 1,798 1512 1,189 957 928 616
456 KORLOY
ESXR704, ESXE704, ESXE714 series Side cutting

Hardened steels
Heat resistant alloy
Conditions HRC40~50 HRC50~55 HRC55~60 HRC60~65 HRC65~70
Diameter (Ø) R.P.M Feed R.P.M Feed R.P.M Feed R.P.M Feed R.P.M Feed
n (min -1) vf (mm/min) n (min -1) vf (mm/min) n (min -1) vf (mm/min) n (min -1) vf (mm/min) n (min -1) vf (mm/min)
4 17,200 1,690 11,440 1,140 9,360 700 7,280 430 6,170 310
6 13,450 1,820 8,970 1,230 6,890 720 5,460 450 4,810 330
8 9,100 1,750 6,760 1,170 5,200 670 4,160 420 3,640 310
10 8,000 1,630 5,330 1,090 4,160 620 3,320 400 2,860 280
12 6,830 1,630 4,550 1,010 3,450 580 2,730 370 2,420 260
Application tip
ap : 1.0D
ae : 0.03D
ESLNB20 series
Workpiece Alloy steels, Heat resistant steels Hardened steels Hardened steels
Copper, Copper alloy
HRC30~45 HRC45~55 HRC55~65
Conditions
R.P.M Feed ae R.P.M Feed ae R.P.M Feed ae R.P.M Feed ae
Diameter (Ø) n (min -1) vf (mm/min) (mm) n (min -1) vf (mm/min) (mm) n (min -1) vf (mm/min) (mm) n (min -1) vf (mm/min) (mm)
0.5 34,100~49,500 600~870 0.007~0.028 31,900~35,200 490~540 0.005~0.023 31,900~35,200 440~480 0.005~0.021 49,000~50,000 1,100~1,400 0.010~0.042
0.6 28,600~40,700 590~850 0.007~0.034 26,400~29,700 480~540 0.006~0.028 26,400~29,700 400~480 0.006~0.025 42,000~50,000 1,100~1,700 0.011~0.050
0.8 22,000~30,800 640~890 0.016~0.064 19,800~22,000 490~550 0.013~0.052 19,800~22,000 440~500 0.012~0.048 31,000~50,000 1,100~2,250 0.024~0.096
1.0 17,600~24,200 600~850 0.008~0.080 15,400~17,600 470~540 0.007~0.065 15,400~17,600 440~500 0.006~0.060 24,000~49,500 1,100~2,200 0.012~0.120
1.2 14,300~18,700 590~780 0.024~0.032 12,000~14,000 480~540 0.020~0.026 12,000~14,000 420~480 0.018~0.024 28,500~38,500 1,480~1,950 0.036~0.048
1.5 11,000~14,300 580~760 0.031~0.048 10,000~11,500 480~540 0.025~0.039 10,000~11,500 420~480 0.023~0.036 17,000~28,500 1,100~1,950 0.046~0.072
2.0 8,500~11,000 590~800 0.024~0.160 7,900~8,800 470~530 0.020~0.130 7,900~8,800 440~480 0.018~0.120 12,600~24,000 1,100~2,150 0.036~0.240
3.0 5,700~8,200 730~1,000 0.064~0.24 5,300~5,800 590~650 0.052~0.195 5,300~5,800 550~620 0.048~0.120 11,900~17,000 1,850~2,700 0.096~0.360
4.0 4,300~6,200 680~990 0.080~0.320 3,950~4,400 550~620 0.065~0.260 3,850~4,400 530~570 0.060~0.240 6,600~12,500 1,260~2,500 0.120~0.480
Application tip
ae
*ae : D1 ~ D4 = 0.05 × D ap
D5 ~ D8 = 0.025mm
D10 ~ D20 = 0.30mm
KORLOY 457
H-Star Endmill
ESTNB20 series
Workpiece
180~250HB HRC35~45 HRC45~55 HRC55~65
R Diameter Neck length Neck Angle Depth of Cut R.P.M Feed R.P.M Feed R.P.M Feed R.P.M Feed
(mm) (Ø) (mm) (˚) (mm) n (min -1) vf (mm/min) n (min -1) vf (mm/min) n (min -1) vf (mm/min) n (min -1) vf (mm/min)
4 0.4 0.062 32,000 2,560 22,400 1,613 20,800 1,331 20,800 1,165
6 0.4 0.045 32,000 2,560 22,400 1,613 20,800 1,331 20,800 1,165
0.4 0.8 8 0.9 0.026 25,600 1,475 17,920 1,032 16,640 852 16,640 745
12 0.9 0.020 20,800 1,065 14,560 699 13,520 606 13,520 519
16 0.9 0.018 20,800 932 14,560 612 13,520 530 13,520 454
4 0.4 0.063 28,300 2,547 19,810 1,605 18,395 1,324 18,395 1,159
8 0.4 0.050 28,300 2,547 19,810 1,605 18,395 1,324 18,395 1,159
12 0.4 0.037 18,400 1,325 12,880 811 11,960 753 11,960 646
16 0.4 0.024 18,400 1,325 12,880 811 11,960 753 11,960 646
0.45 0.9
18 0.4 0.018 18,400 1,325 12,880 811 11,960 753 11,960 646
20 0.4 0.015 15,850 1,141 11,095 699 10,303 649 10,303 556
22 0.4 0.012 15,850 1,141 11,095 699 10,303 649 10,303 556
24 0.4 0.009 14,150 1,019 9,905 624 9,198 579 9,198 497
6 0.4 0.055 25,600 2,560 17,920 1,613 16,640 1,331 16,640 1,165
8 0.4 0.055 25,600 2,560 17,920 1,613 16,640 1,331 16,640 1,165
10 0.4 0.032 20,800 1,872 14,560 1,310 13,520 1,082 13,520 946
10 0.9 0.035 20,800 1,872 14,560 1,310 13,520 1,082 13,520 946
15 0.9 0.028 16,640 1,331 11,648 874 10,816 757 10,816 649
20 0.4 0.018 16,640 1,331 11,648 874 10,816 757 10,816 649
20 0.9 0.020 16,640 1,331 11,648 874 10,816 757 10,816 649
0.5 1 25 0.9 0.017 14,560 1,165 10,192 764 9,464 662 9,464 568
30 0.4 0.015 12,480 874 8,736 568 8,112 487 8,112 406
30 0.9 0.017 12,480 874 8,736 568 8,112 487 8,112 406
35 0.9 0.010 10,400 728 7,280 473 6,760 406 6,760 338
40 0.9 0.009 10,000 700 7,000 455 6,500 390 6,500 325
50 0.9 0.007 9,500 665 6,650 432 6,175 371 6,175 309
60 0.9 0.005 9,000 630 6,300 410 5,850 351 5,850 293
70 0.9 0.003 8,500 595 5,950 387 5,525 332 5,525 276
8 0.4 0.070 16,960 2,544 11,872 1,603 11,024 1,323 11,024 1,158
10 0.4 0.070 16,960 2,544 11,872 1,603 11,024 1,323 11,024 1,158
12 0.4 0.070 16,960 2,544 11,872 1,603 11,024 1,323 11,024 1,158
0.75 1.5
15 0.9 0.045 13,568 1,832 9,498 1,282 8,819 1,058 8,819 926
20 0.9 0.040 11,024 1,323 7,717 810 7,166 752 7,166 645
30 0.9 0.028 11,024 1,323 7,717 810 7,166 752 7,166 645
Application tip
ae
*ae : D1 ~ D4 = 0.05 × D ap
D5 ~ D8 = 0.025mm
D10 ~ D20 = 0.30mm
t For Rib or Slotting machining process which are not easy for chip ejection, please reduce the cutting depth by 20~30% from the above cutting condition.
ex) ESTNB2040-20-10, HRC 55, Rib processing
ex) Cutting depth: 0.32(standard cutting depth) × 0.65 × 0.8 = 0.17mm
t In actual machining, the condition should be adjusted according to the machining shape, purpose and the machine type.
458 KORLOY
ESTNB20 series
Workpiece
180~250HB HRC35~45 HRC45~55 HRC55~65
4 0.4 0.120 14,200 2,556 9,940 1,610 9,230 1,329 9,230 1,163
8 0.4 0.100 14,200 2,556 9,940 1,610 9,230 1,329 9,230 1,163
12 0.4 0.080 14,200 2,556 9,940 1,610 9,230 1,329 9,230 1,163
16 0.4 0.071 14,200 2,556 9,940 1,610 9,230 1,329 9,230 1,163
20 0.4 0.062 9,230 1,329 6,461 814 6,000 756 6,000 648
0.9 1.8 24 0.4 0.053 9,230 1,329 6,461 814 6,000 756 6,000 648
28 0.4 0.044 9,230 1,329 6,461 814 6,000 756 6,000 648
32 0.4 0.036 9,230 1,329 6,461 814 6,000 756 6,000 648
36 0.4 0.028 9,230 1,329 6,461 814 6,000 756 6,000 648
38 0.4 0.020 8,000 1,152 5,600 706 5,200 655 5,200 562
40 0.4 0.015 8,000 1,152 5,600 706 5,200 655 5,200 562
8 0.4 0.150 15,200 3,040 10,640 1,915 9,880 1,581 9,880 1,383
12 0.4 0.090 15,200 3,040 10,640 1,915 9,880 1,581 9,880 1,383
16 0.4 0.090 15,200 3,040 10,640 1,915 9,880 1,581 9,880 1,383
20 0.4 0.060 12,160 2,189 8,512 1,532 7,904 1,265 7,904 1,107
20 0.9 0.070 12,160 2,189 8,512 1,532 7,904 1,265 7,904 1,107
25 0.9 0.070 9,880 1,581 6,916 968 6,442 899 6,422 771
30 0.4 0.040 9,880 1,581 6,916 968 6,442 899 6,422 771
1 2
30 0.9 0.045 9,880 1,581 6,916 968 6,442 899 6,422 771
35 0.9 0.045 9,880 1,581 6,916 968 6,442 899 6,422 771
40 0.4 0.030 9,880 1,581 6,916 968 6,442 899 6,422 771
40 0.9 0.035 9,880 1,581 6,916 968 6,442 899 6,422 771
50 0.9 0.170 8,512 1,192 5,958 775 5,533 664 5,533 553
60 0.9 0.009 7,235 1,013 5,065 658 4,703 564 4,703 470
70 0.9 0.005 6,150 861 4,305 560 3,997 480 3,997 400
8 0.4 0.320 12,720 3,816 8,904 2,404 8,268 1,984 8,268 1,736
16 0.4 0.220 12,720 3,816 8,904 2,404 8,268 1,984 8,268 1,736
20 0.4 0.150 12,720 3,434 8,904 2,137 8,268 1,736 8,268 1,488
30 0.4 0.080 10,176 2,748 7,123 1,496 6,614 1,389 6,614 1,191
30 0.9 0.090 10,176 2,748 7,123 1,496 6,614 1,389 6,614 1,191
1.5 3
40 0.4 0.060 8,268 1,984 5,788 1,215 5,374 1,129 5,374 967
40 0.9 0.070 8,268 1,984 5,788 1,215 5,374 1,129 5,374 967
50 0.9 0.050 8,268 1,984 5,788 1,215 5,374 1,129 5,374 967
60 0.9 0.030 7,123 1,710 4,986 1,047 4,630 972 4,630 833
70 0.9 0.020 6,233 1,496 4,363 916 4,051 851 4,051 729
Application tip
ae
*ae : D1 ~ D4 = 0.05 × D ap
D5 ~ D8 = 0.025mm
D10 ~ D20 = 0.30mm
KORLOY
Y 459
H-Star Endmill
ESTNB20 series
Workpiece
180~250HB HRC35~45 HRC45~55 HRC55~65
20 1 0.32 11,900 2,860 9,000 2,050 7,800 1,680 7,800 1,590

30 1 0.23 11,900 2,570 9,000 1,850 7,800 1,520 7,800 1,430
2 4 40 1 0.14 9,500 1,940 7,200 1,400 6,200 1,140 6,200 1,080
50 1 0.11 7,800 1,590 5,800 1,120 5,000 920 5,000 870
60 1 0.07 7,800 1,590 5,800 1,120 5,000 920 5,000 870
30 1 0.34 9,500 2,140 7,200 1,540 6,200 1,260 6,200 1,190
2.5 5 40 1 0.25 9,500 2,140 7,200 1,540 6,200 1,260 6,200 1,190
60 1 0.15 6,200 1,320 4,700 950 4,000 770 4,000 720
30 1 0.45 8,000 2,000 6,000 1,430 5,200 1,170 5,200 1,110
40 1 0.40 8,000 1,800 6,000 1,280 5,200 1,050 5,200 990
50 1 0.32 8,000 1,800 6,000 1,280 5,200 1,050 5,200 990
3 6
60 1 0.22 6,400 1,360 4,800 970 4,100 780 4,100 740
70 1 0.18 5,200 1,110 3,900 790 3,400 650 3,400 610
80 1 0.14 5,200 1,110 3,900 790 3,400 650 3,400 610
50 1 0.50 6,000 1,460 4,500 1,040 3,900 850 3,900 810
60 1 0.43 6,000 1,460 4,500 1,040 3,900 850 3,900 810
4 8
70 1 0.33 6,000 1,460 4,500 1,040 3,900 850 3,900 810
80 1 0.25 4,800 1,100 3,600 780 3,100 640 3,100 600
60 1 0.70 4,800 1,300 3,600 920 3,100 750 3,100 710
5 10
75 1 0.50 4,800 1,300 3,600 920 3,100 750 3,100 710
Application tip
ae
*ae : D1 ~ D4 = 0.05 × D ap
D5 ~ D8 = 0.025mm
D10 ~ D20 = 0.30mm
460 KORLOY
ESTNB30 series
Workpiece
180~250HB HRC35~45 HRC45~55 HRC55~65
1 0.4 0.017 40,000 800 28,000 504 26,000 416 26,000 364
1.5 0.4 0.009 40,000 800 28,000 504 26,000 416 26,000 364
0.1 0.2
2 0.9 0.007 32,000 461 22,400 323 20,800 266 20,800 233
2.5 0.9 0.004 26,000 333 18,200 204 16,900 189 16,900 162
2 0.4 0.025 40,000 1,200 28,000 756 26,000 624 26,000 546
0.15 0.3 3 0.9 0.013 32,000 691 22,400 484 20,800 399 20,800 349
4 0.9 0.010 26,000 499 18,200 306 16,900 284 16,900 243
2 0.4 0.035 40,000 1,600 28,000 1,008 26,000 832 26,000 728
3 0.4 0.020 40,000 1,600 28,000 1,008 26,000 832 26,000 728
4 0.4 0.007 32,000 922 22,400 645 20,800 532 20,800 466
0.2 0.4
4 0.9 0.009 32,000 922 22,400 645 20,800 532 20,800 466
5 0.4 0.006 26,000 666 18,200 408 16,900 379 16,900 324
5 0.9 0.007 26,000 666 18,200 408 16,900 379 16,900 324
4 0.4 0.040 40,000 2,000 28,000 1,260 26,000 1,040 26,000 910
0.25 0.5 8 0.9 0.010 26,000 728 18,200 446 16,900 414 16,900 355
12 0.9 0.005 22,400 627 15,680 384 14,560 357 14,560 306
2 0.4 0.050 40,000 2,160 28,000 1,361 26,000 1,123 26,000 983
4 0.4 0.037 40,000 2,160 28,000 1,361 26,000 1,123 26,000 983
5 0.4 0.031 40,000 1,512 28,000 1,176 26,000 1,040 26,000 832
0.27 0.54
6 0.4 0.025 26,000 1,244 18,200 871 16,900 676 16,900 629
6.5 0.4 0.020 26,000 1,011 18,200 619 16,900 575 16,900 493
7 0.4 0.015 26,000 899 18,200 585 16,900 543 16,900 465
2 0.4 0.055 40,000 2,400 28,000 1,512 26,000 1,248 26,000 1,092
4 0.4 0.035 40,000 2,400 28,000 1,512 26,000 1,248 26,000 1,092
6 0.4 0.018 32,000 1,382 22,400 968 20,800 799 20,800 699
6 0.9 0.020 32,000 1,382 22,400 968 20,800 799 20,800 699
8 0.9 0.020 26,000 998 18,200 612 16,900 568 16,900 487
0.3 0.6
10 0.4 0.013 26,000 874 18,200 535 16,900 497 16,900 426
10 0.9 0.015 26,000 874 18,200 535 16,900 497 16,900 426
12 0.9 0.010 26,000 874 18,200 535 16,900 497 16,900 426
15 0.4 0.005 22,400 753 15,680 461 14,560 367 14,560 367
15 0.9 0.006 22,400 753 15,680 461 14,560 367 14,560 367
Application tip
ae
*ae : D1 ~ D4 = 0.05 × D ap
D5 ~ D8 = 0.025mm
D10 ~ D20 = 0.30mm
KORLOY
Y 461
H-Star Endmill
ESTNB30 series
Workpiece
180~250HB HRC35~45 HRC45~55 HRC55~65
4 0.4 0.062 32,000 2,560 22,400 1,613 20,800 1,331 20,800 1,165
6 0.4 0.045 32,000 2,560 22,400 1,613 20,800 1,331 20,800 1,165
0.4 0.8 8 0.9 0.026 25,600 1,475 17,920 1,032 16,640 852 16,640 745
12 0.9 0.020 20,800 1,065 14,560 699 13,520 606 13,520 519
16 0.9 0.018 20,800 932 14,560 612 13,520 530 13,520 454
4 0.4 0.063 28,300 2,547 19,810 1,605 18,395 1,324 18,395 1,159
8 0.4 0.050 28,300 2,547 19,810 1,605 18,395 1,324 18,395 1,159
12 0.4 0.037 18,400 1,325 12,880 811 11,960 753 11,960 646
16 0.4 0.024 18,400 1,325 12,880 811 11,960 753 11,960 646
0.45 0.9
18 0.4 0.018 18,400 1,325 12,880 811 11,960 753 11,960 646
20 0.4 0.015 15,850 1,141 11,095 699 10,303 649 10,303 556
22 0.4 0.012 15,850 1,141 11,095 699 10,303 649 10,303 556
24 0.4 0.009 14,150 1,019 9,905 624 9,198 579 9,198 497
6 0.4 0.055 25,600 2,560 17,920 1,613 16,640 1,331 16,640 1,165
8 0.4 0.055 25,600 2,560 17,920 1,613 16,640 1,331 16,640 1,165
10 0.4 0.032 20,800 1,872 14,560 1,310 13,520 1,082 13,520 946
10 0.9 0.035 20,800 1,872 14,560 1,310 13,520 1,082 13,520 946
15 0.9 0.028 16,640 1,331 11,648 874 10,816 757 10,816 649
20 0.4 0.018 16,640 1,331 11,648 874 10,816 757 10,816 649
20 0.9 0.020 16,640 1,331 11,648 874 10,816 757 10,816 649
0.5 1 25 0.9 0.017 14,560 1,165 10,192 764 9,464 662 9,464 568
30 0.4 0.015 12,480 874 8,736 568 8,112 487 8,112 406
30 0.9 0.017 12,480 874 8,736 568 8,112 487 8,112 406
35 0.9 0.010 10,400 728 7,280 473 6,760 406 6,760 338
40 0.9 0.009 10,000 700 7,000 455 6,500 390 6,500 325
50 0.9 0.007 9,500 665 6,650 432 6,175 371 6,175 309
60 0.9 0.005 9,000 630 6,300 410 5,850 351 5,850 293
70 0.9 0.003 8,500 595 5,950 387 5,525 332 5,525 276
8 0.4 0.070 16,960 2,544 11,872 1,603 11,024 1,323 11,024 1,158
10 0.4 0.070 16,960 2,544 11,872 1,603 11,024 1,323 11,024 1,158
12 0.4 0.070 16,960 2,544 11,872 1,603 11,024 1,323 11,024 1,158
0.75 1.5
15 0.9 0.045 13,568 1,832 9,498 1,282 8,819 1,058 8,819 926
20 0.9 0.040 11,024 1,323 7,717 810 7,166 752 7,166 645
30 0.9 0.028 11,024 1,323 7,717 810 7,166 752 7,166 645
Application tip
ae
*ae : D1 ~ D4 = 0.05 × D ap
D5 ~ D8 = 0.025mm
D10 ~ D20 = 0.30mm
462 KORLOY
ESTNB30 series
Workpiece
180~250HB HRC35~45 HRC45~55 HRC55~65
4 0.4 0.120 14,200 2,556 9,940 1,610 9,230 1,329 9,230 1,163
8 0.4 0.100 14,200 2,556 9,940 1,610 9,230 1,329 9,230 1,163
12 0.4 0.080 14,200 2,556 9,940 1,610 9,230 1,329 9,230 1,163
16 0.4 0.071 14,200 2,556 9,940 1,610 9,230 1,329 9,230 1,163
20 0.4 0.062 9,230 1,329 6,461 814 6,000 756 6,000 648
0.9 1.8 24 0.4 0.053 9,230 1,329 6,461 814 6,000 756 6,000 648
28 0.4 0.044 9,230 1,329 6,461 814 6,000 756 6,000 648
32 0.4 0.036 9,230 1,329 6,461 814 6,000 756 6,000 648
36 0.4 0.028 9,230 1,329 6,461 814 6,000 756 6,000 648
38 0.4 0.020 8,000 1,152 5,600 706 5,200 655 5,200 562
40 0.4 0.015 8,000 1,152 5,600 706 5,200 655 5,200 562
8 0.4 0.150 15,200 3,040 10,640 1,915 9,880 1,581 9,880 1,383
12 0.4 0.090 15,200 3,040 10,640 1,915 9,880 1,581 9,880 1,383
16 0.4 0.090 15,200 3,040 10,640 1,915 9,880 1,581 9,880 1,383
20 0.4 0.060 12,160 2,189 8,512 1,532 7,904 1,265 7,904 1,107
20 0.9 0.070 12,160 2,189 8,512 1,532 7,904 1,265 7,904 1,107
25 0.9 0.070 9,880 1,581 6,916 968 6,442 899 6,422 771
30 0.4 0.040 9,880 1,581 6,916 968 6,442 899 6,422 771
1 2
30 0.9 0.045 9,880 1,581 6,916 968 6,442 899 6,422 771
35 0.9 0.045 9,880 1,581 6,916 968 6,442 899 6,422 771
40 0.4 0.030 9,880 1,581 6,916 968 6,442 899 6,422 771
40 0.9 0.035 9,880 1,581 6,916 968 6,442 899 6,422 771
50 0.9 0.170 8,512 1,192 5,958 775 5,533 664 5,533 553
60 0.9 0.009 7,235 1,013 5,065 658 4,703 564 4,703 470
70 0.9 0.005 6,150 861 4,305 560 3,997 480 3,997 400
8 0.4 0.320 12,720 3,816 8,904 2,404 8,268 1,984 8,268 1,736
16 0.4 0.220 12,720 3,816 8,904 2,404 8,268 1,984 8,268 1,736
20 0.4 0.150 12,720 3,434 8,904 2,137 8,268 1,736 8,268 1,488
30 0.4 0.080 10,176 2,748 7,123 1,496 6,614 1,389 6,614 1,191
30 0.9 0.090 10,176 2,748 7,123 1,496 6,614 1,389 6,614 1,191
1.5 3
40 0.4 0.060 8,268 1,984 5,788 1,215 5,374 1,129 5,374 967
40 0.9 0.070 8,268 1,984 5,788 1,215 5,374 1,129 5,374 967
50 0.9 0.050 8,268 1,984 5,788 1,215 5,374 1,129 5,374 967
60 0.9 0.030 7,123 1,710 4,986 1,047 4,630 972 4,630 833
70 0.9 0.020 6,233 1,496 4,363 916 4,051 851 4,051 729
Application tip
ae
*ae : D1 ~ D4 = 0.05 × D ap
D5 ~ D8 = 0.025mm
D10 ~ D20 = 0.30mm
KORLOY
Y 463
H-Star Endmill
ESTNB30 series
Workpiece
180~250HB HRC35~45 HRC45~55 HRC55~65
20 1 0.32 11,900 2,860 9,000 2,050 7,800 1,680 7,800 1,590

30 1 0.23 11,900 2,570 9,000 1,850 7,800 1,520 7,800 1,430
2 4 40 1 0.14 9,500 1,940 7,200 1,400 6,200 1,140 6,200 1,080
50 1 0.11 7,800 1,590 5,800 1,120 5,000 920 5,000 870
60 1 0.07 7,800 1,590 5,800 1,120 5,000 920 5,000 870
30 1 0.34 9,500 2,140 7,200 1,540 6,200 1,260 6,200 1,190
2.5 5 40 1 0.25 9,500 2,140 7,200 1,540 6,200 1,260 6,200 1,190
60 1 0.15 6,200 1,320 4,700 950 4,000 770 4,000 720
30 1 0.45 8,000 2,000 6,000 1,430 5,200 1,170 5,200 1,110
40 1 0.40 8,000 1,800 6,000 1,280 5,200 1,050 5,200 990
50 1 0.32 8,000 1,800 6,000 1,280 5,200 1,050 5,200 990
3 6
60 1 0.22 6,400 1,360 4,800 970 4,100 780 4,100 740
70 1 0.18 5,200 1,110 3,900 790 3,400 650 3,400 610
80 1 0.14 5,200 1,110 3,900 790 3,400 650 3,400 610
50 1 0.50 6,000 1,460 4,500 1,040 3,900 850 3,900 810
60 1 0.43 6,000 1,460 4,500 1,040 3,900 850 3,900 810
4 8
70 1 0.33 6,000 1,460 4,500 1,040 3,900 850 3,900 810
80 1 0.25 4,800 1,100 3,600 780 3,100 640 3,100 600
60 1 0.70 4,800 1,300 3,600 920 3,100 750 3,100 710
5 10
75 1 0.50 4,800 1,300 3,600 920 3,100 750 3,100 710
Application tip
ae
*ae : D1 ~ D4 = 0.05 × D ap
D5 ~ D8 = 0.025mm
D10 ~ D20 = 0.30mm
464 KORLOY
ESLNS20, ESLNS40 series

Workpiece Alloy steels, Heat resistant steels Hardened steels High-hardened steels
Copper, Copper alloy
HRC30~45 HRC45~55 HRC55~65
Conditions
R.P.M Feed ae R.P.M Feed ae R.P.M Feed ae R.P.M Feed ae
Diameter (Ø) n (min -1) vf (mm/min) (mm) n (min -1) vf (mm/min) (mm) n (min -1) vf (mm/min) (mm) n (min -1) vf (mm/min) (mm)
0.4 34,100~50,000 350~590 0.005~0.028 30,500~35,200 295~340 0.003~0.020 18,300~24,600 120~200 0.002~0.012 48,000~50,000 790~920 0.008~0.048
0.5 25,650~33,000 370~470 0.006~0.035 23,750~26,000 285~315 0.004~0.025 14,200~18,000 115~130 0.003~0.015 44,000~50,000 800~1,150 0.010~0.060
0.6 20,900~35,200 330~560 0.007~0.030 19,900~22,000 260~290 0.005~0.021 11,900~15,500 100~120 0.003~0.013 37,500~50,000 770~1,250 0.011~0.051
0.8 16,150~26,400 360~590 0.009~0.040 15,200~16,700 280~310 0.006~0.028 9,000~11,700 110~125 0.004~0.017 28,500~47,000 770~1,300 0.015~0.068
1.0 12,300~18,700 350~540 0.011~0.028 10,500~11,500 250~280 0.008~0.020 6,300~8,050 100~115 0.005~0.012 22,500~34,000 810~1,300 0.018~0.048
1.2 10,450~17,600 350~590 0.025~0.070 9,100~10,000 250~280 0.015~0.042 5,400~7,000 100~115 0.009~0.026 22,500~31,500 950~1,350 0.036~0.101
1.5 9,100~17,600 430~830 0.017~0.077 7,000~8,000 250~280 0.012~0.055 4,300~5,500 100~115 0.007~0.033 14,500~25,000 770~1,320 0.028~0.132
2.0 6,350~10,550 340~570 0.021~0.140 6,100~6,700 270~300 0.015~0.100 3,600~4,700 100~120 0.009~0.060 11,500~18,500 770~1,250 0.036~0.240
3.0 4,300~7,050 550~900 0.056~0.210 3,990~4,600 445~515 0.040~0.150 2,400~3,200 105~310 0.024~0.090 9,000~13,000 1,400~2,110 0.096~0.360
4.0 3,200~5,300 400~675 0.074~0.280 3,000~3,400 335~380 0.053~0.200 1,800~2,400 75~230 0.032~0.120 6,750~9,750 1,050~1,575 0.128~0.480
Application tip
ap
ae : 0.03D
KORLOY 465
H-Star Endmill
ESLNR series
Workpiece
180~250HB HRC35~45 HRC45~55 HRC55~65
0.5 0.020 50,000 258 50,000 205 50,000 180 50,000 160
1 0.014 50,000 258 50,000 205 50,000 180 50,000 160
0.2 0.05
1.5 0.008 50,000 240 45,900 202 45,900 170 45,900 153
2 0.008 42,000 202 36,700 176 36,700 162 36,700 147
1 0.021 50,000 585 50,000 456 50,000 336 50,000 320
1.5 0.016 50,000 585 45,000 456 45,000 336 45,000 320
0.3 0.05 2 0.012 45,000 530 45,000 420 45,000 300 45,000 290
2.5 0.010 40,000 471 40,000 373 40,000 267 40,000 258
3 0.008 35,000 412 35,000 326 30,000 200 30,000 194
1 0.025 50,000 580 50,000 461 40,000 320 36,000 270
1.5 0.020 50,000 580 50,000 461 40,000 320 36,000 270
2 0.016 45,000 520 45,000 410 36,000 290 34,000 240
0.05 2.5 0.015 40,500 480 40,500 370 33,400 270 30,600 220
3 0.014 40,000 410 40,000 330 32,800 240 25,600 200
0.4
3.5 0.012 36,000 380 36,000 300 29,400 200 22,920 180
4 0.008 30,000 320 30,000 250 21,600 160 19,200 150
2 0.028 45,000 520 45,000 410 36,000 290 34,000 240
0.1 3 0.016 40,000 410 40,000 330 32,800 240 25,600 200
4 0.010 30,000 320 30,000 250 21,600 160 19,200 150
1 0.030 50,000 898 40,000 464 30,000 378 28,000 315
2 0.023 50,000 898 40,000 464 30,000 378 28,000 315
3 0.017 45,000 810 36,000 414 27,000 315 24,500 261
0.05
4 0.017 40,000 820 32,000 378 24,000 279 20,000 234
5 0.011 28,800 540 19,400 280 18,000 250 15,000 200
6 0.008 28,800 480 19,400 260 18,000 250 15,000 200
0.5
1 0.035 50,000 898 40,000 464 30,000 378 28,000 315
2 0.030 50,000 898 40,000 464 30,000 378 28,000 315
3 0.020 45,000 810 36,000 414 27,000 315 24,500 261
0.1
4 0.020 40,000 720 32,000 378 24,000 279 20,000 234
5 0.013 28,800 540 19,400 280 18,000 250 15,000 200
6 0.013 28,800 480 19,400 260 18,000 250 15,000 200
2 0.035 50,000 1,159 37,830 600 28,200 390 23,000 320
4 0.024 40,000 830 27,800 440 23,600 280 21,000 230
0.6 0.1 6 0.015 24,000 490 18,000 300 17,800 240 15,000 210
8 0.013 24,000 466 18,000 285 17,800 228 15,000 200
10 0.009 24,000 451 18,000 276 17,800 221 15,000 193
Application tip
ap
ae : 0.03D
466 KORLOY
ESLNR series
Workpiece
180~250HB HRC35~45 HRC45~55 HRC55~65
6 0.08 20,790 1,635 17,672 1,389 15,593 981 14,553 801

8 0.07 18,900 1,486 16,065 1,263 14,175 892 13,230 728
12 0.04 15,309 1,083 13,013 921 11,482 722 10,716 590
0.2 16 0.04 13,608 963 11,567 818 10,206 642 9,526 524
20 0.035 11,907 843 10,121 716 8,930 562 8,335 459
25 0.025 11,907 843 10,121 716 8,930 562 8,335 459
30 0.017 11,312 800 9,615 680 8,484 534 7,918 436
8 0.09 18,900 1,651 16,065 1,403 14,175 991 13,230 809
0.3 16 0.06 13,608 1,070 11,567 909 10,206 713 9,526 583
20 0.037 11,907 936 10,121 796 8,930 624 8,335 510
2
6 0.017 20,709 1,635 17,672 1,389 15,593 981 14,553 801
8 0.014 18,900 1,651 16,065 1,403 14,175 991 13,230 809
12 0.08 15,309 1,204 13,013 1,023 11,482 802 10,716 655
0.5 16 0.08 13,608 1,070 11,567 909 10,206 713 9,526 583
20 0.05 11,907 936 10,121 796 8,930 624 8,335 510
25 0.05 11,907 936 10,121 796 8,930 624 8,335 510
30 0.03 11,312 889 9,615 756 8,484 593 7,918 484
8 0.2 18,900 1,651 16,065 1,403 14,175 991 13,230 809
0.8 16 0.1 13,608 1,070 11,567 909 10,206 713 9,526 583
20 0.06 11,907 936 10,121 796 8,930 624 8,335 510
8 0.09 14,400 1,415 12,240 1,203 10,800 849 10,080 693
12 0.07 14,400 1,415 12,240 1,203 10,800 849 10,080 693
16 0.05 14,400 1,415 12,240 1,203 10,800 849 10,080 693
0.2
20 0.05 11,664 1,146 9,914 974 8,748 764 8,165 624
30 0.04 9,072 1,146 7,711 974 6,804 764 6,350 624
35 0.035 9,072 1,146 7,711 974 6,804 764 6,350 624
8 0.13 14,400 1,572 12,240 1,337 10,800 943 10,080 771
16 0.075 14,400 1,572 12,240 1,337 10,800 943 10,080 771
3 0.3
20 0.075 11,664 1,274 9,914 1,083 8,748 849 8,165 693
30 0.06 9,072 1,274 7,711 1,083 6,804 849 6,350 693
8 0.18 14,400 1,572 12,240 1,337 10,800 943 10,080 771
12 0.13 14,400 1,572 12,240 1,337 10,800 943 10,080 771
16 0.1 14,400 1,572 12,240 1,337 10,800 943 10,080 771
0.5
20 0.1 11,664 1,274 9,914 1,083 8,748 849 8,165 693
30 0.08 9,072 1,274 7,711 1,083 6,804 849 6,350 693
35 0.065 9,072 1,274 7,711 1,083 6,804 849 6,350 693
Application tip
ap
ae : 0.03D
KORLOY 467
H-Star Endmill
ESLNR series
Workpiece
180~250HB HRC35~45 HRC45~55 HRC55~65
4 0.032 48,000 1,102 28,000 518 20,000 320 20,000 288

6 0.019 38,700 800 25,000 461 18,000 288 18,000 256
0.1
8 0.015 29,025 600 20,000 369 16,200 259 16,200 230
0.8
12 0.012 29,025 570 20,000 350 16,200 246 16,200 219
4 0.056 48,000 1,102 28,000 518 20,000 320 20,000 288
0.2
6 0.032 38,700 800 25,000 461 18,000 288 18,000 256
4 0.038 32,400 1,359 27,540 1,039 24,300 815 22,680 666
6 0.024 26,244 990 22,307 842 19,683 660 18,371 539
8 0.024 23,328 880 19,829 748 17,496 587 16,330 479
0.1 10 0.015 20,412 770 17,350 655 15,309 514 14,288 419
12 0.015 18,144 609 15,422 453 13,608 399 12,701 320
16 0.009 18,144 533 15,422 420 13,608 342 12,701 266
20 0.006 13,608 399 11,567 315 10,206 257 9,526 200
4 0.07 32,400 1,359 27,540 1,039 24,300 815 22,680 666
6 0.040 26,244 990 22,307 842 19,683 660 18,371 539
1
8 0.040 23,328 880 19,829 748 17,496 587 16,330 479
0.2 10 0.025 20,412 770 17,350 655 15,309 514 14,288 419
12 0.025 18,144 609 15,422 453 13,608 399 12,701 320
16 0.015 18,144 533 15,422 420 13,608 342 12,701 266
20 0.010 13,608 399 11,567 315 10,206 257 9,526 200
6 0.040 26,244 990 22,307 842 19,683 660 18,371 539
10 0.025 20,412 770 17,350 655 15,309 514 14,288 419
0.3
16 0.015 18,144 533 15,422 420 13,608 342 12,701 266
20 0.010 13,608 399 11,567 315 10,206 257 9,526 200
4 0.042 24,930 1,130 20,956 868 18,711 678 17,364 556
8 0.036 22,680 1,027 19,278 873 17,010 685 15,876 559
0.1 12 0.036 18,144 822 15,422 698 13,608 548 12,701 447
15 0.023 14,112 568 11,995 423 10,584 373 9,878 298
20 0.018 14,112 568 11,995 423 10,584 373 9,878 298
4 0.070 24,930 1,130 20,956 868 18,711 678 17,364 556
1.5 8 0.060 22,680 1,027 19,278 873 17,010 685 15,876 559
0.2 12 0.060 18,144 822 15,422 698 13,608 548 12,701 447
15 0.038 14,112 568 11,995 423 10,584 373 9,878 298
20 0.030 14,112 568 11,995 423 10,584 373 9,878 298
8 0.060 22,680 1,027 19,278 873 17,010 685 15,876 559
0.3 15 0.038 14,112 568 11,995 423 10,584 373 9,878 298
20 0.030 14,112 568 11,995 423 10,584 373 9,878 298
Application tip
ap
ae : 0.03D
468 KORLOY
ESTNR series
Workpiece
180~250HB HRC35~45 HRC45~55 HRC55~65
0.2 0.05 2 0.007 39,660 887 33,660 754 29,700 591 27,720 483
4 0.009 30,096 899 25,582 764 22,572 599 21,067 489
0.05
5 0.007 26,752 710 22,739 528 20,064 466 18,726 373
0.4
4 0.009 31,680 946 26,928 804 23,760 631 22,176 515
0.1
5 0.007 28,160 747 23,936 556 21,120 490 19,712 392
5 0.013 30,413 1,090 25,851 753 22,810 562 21,289 453
0.5 0.1 8 0.008 24,330 678 20,681 468 18,248 350 17,031 282
10 0.007 18,248 509 15,511 351 13,686 262 12,773 211
12 0.01 20,377 791 17,320 546 15,282 408 14,264 329
0.6 0.1
15 0.006 16,727 649 14,218 448 12,545 335 11,709 270
6 0.045 31,680 1,084 26,928 921 23,760 723 22,176 590
0.8 0.2
12 0.02 28,160 943 23,936 695 21,120 613 19,712 490
8 0.04 28,512 1,463 24,235 1,244 21,384 976 19,958 797
10 0.035 28,512 1,596 24,235 1,357 21,384 1,064 19,958 869
15 0.028 25,344 1,261 21,542 938 19,008 828 17,741 662
0.2 20 0.02 19,008 828 16,157 653 14,256 532 13,306 414
25 0.017 15,840 690 13,464 544 11,880 443 11,088 345
1 30 0.017 15,840 690 13,464 544 11,880 443 11,088 345
35 0.01 15,840 690 13,464 544 11,880 443 11,088 345
8 0.04 28,512 1,463 24,235 1,244 21,384 976 19,958 797
15 0.028 25,344 1,261 21,542 938 19,008 828 17,741 662
0.3
25 0.017 15,840 690 13,464 544 11,880 443 11,088 345
30 0.017 15,840 690 13,464 544 11,880 443 11,088 345
10 0.05 21,683 1,079 18,431 803 16,262 708 15,178 567
15 0.045 19,712 981 16,755 730 14,784 644 13,798 515
0.2 20 0.042 17,347 863 14,745 642 13,010 567 12,143 453
25 0.032 14,784 644 12,566 508 11,088 414 10,349 322
1.5 30 0.028 12,320 536 10,472 423 9,240 345 8,624 268
10 0.05 21,683 1,079 18,431 803 16,262 708 15,178 567
20 0.042 17,347 863 14,745 642 13,010 567 12,143 453
0.3
25 0.032 14,784 644 12,566 508 11,088 414 10,349 322
30 0.028 12,320 536 10,472 423 9,240 345 8,624 268
Application tip
ap
ae : 0.03D
KORLOY
Y 469
H-Star Endmill
ESTNR series
Workpiece
180~250HB HRC35~45 HRC45~55 HRC55~65
30 0.045 13,440 1,254 11,424 933 10,080 823 9,408 658

0.2 40 0.035 10,080 823 8,568 650 7,560 529 7,056 412
50 0.017 8,400 686 7,140 541 6,300 441 5,880 343
12 0.088 22,680 1,814 19,278 1,427 17,010 1,191 15,876 1,048
20 0.054 18,144 1,452 15,422 1,141 13,608 953 12,701 838
0.3 30 0.045 13,440 1,393 11,424 1,036 10,080 914 9,408 732
40 0.035 10,080 914 8,568 722 7,560 588 7,056 457
50 0.017 8,400 762 7,140 601 6,300 490 5,880 381
2
8 0.170 22,680 1,814 19,278 1,427 17,010 1,191 15,876 1,048
12 0.088 22,680 1,814 19,278 1,427 17,010 1,191 15,876 1,048
16 0.088 19,278 1,542 16,386 1,213 14,459 1,012 13,495 891
20 0.054 18,114 1,452 15,422 1,141 13,608 953 12,701 838
0.5
25 0.054 15,876 1,270 13,495 999 11,907 833 11,113 733
30 0.045 13,440 1,393 11,424 1,036 10,080 914 9,408 732
40 0.035 10,080 914 8,568 722 7,560 588 7,056 457
50 0.017 8,400 762 7,140 601 6,300 490 5,880 381
40 0.070 10,240 956 8,704 711 7,680 627 7,168 502
0.2 50 0.050 7,680 627 6,528 495 5,760 403 5,376 314
60 0.030 6,400 523 5,440 412 4,800 336 4,480 261
40 0.070 10,240 1,062 8,704 790 7,680 697 7,168 557
3 0.3 50 0.050 7,680 697 6,528 550 5,760 448 5,376 348
60 0.030 6,400 581 5,440 458 4,800 373 4,480 290
40 0.070 10,240 1,062 8,704 790 7,680 697 7,168 557
0.5 50 0.050 7,680 697 6,528 550 5,760 448 5,376 348
60 0.030 6,400 581 5,440 458 4,800 373 4,480 290
Application tip
ap
ae : 0.03D
470 KORLOY
ESPM4 series Side cutting

Hardened steels
Conditions ~HRC40 HRC40~50 HRC50~55 HRC55~60 HRC60~65
Diameter (Ø) × R (mm) R.P.M Feed R.P.M Feed R.P.M Feed R.P.M Feed R.P.M Feed
3 × R0.5 9,550 6,500 6,900 4,150 4,550 2,750 2,850 1,150 1,900 610
4 × R0.5 7,950 7,000 5,750 4,600 4,000 3,200 2,550 1,350 1,750 700
6 × R0.5 5,800 7,650 4,100 4,900 2,900 3,500 1,850 1,850 1,350 795
6 × R1.0 5,800 7,650 4,100 4,900 2,900 3,500 1,850 1,850 1,350 795
8 × R1.0 4,350 7,650 3,050 4,900 2,200 3,500 1,400 1,850 995 795
8 × R2.0 4,350 7,650 3,050 4,900 2,200 3,500 1,400 1,850 995 795
10 × R1.0 3,500 7,650 2,450 4,900 1,750 3,500 1,100 1,850 795 795
10 × R2.0 3,500 7,650 2,450 4,900 1,750 3,500 1,100 1,850 795 795
12 × R2.0 2,900 7,650 2,050 4,900 1,450 3,500 925 1,850 665 795
12 × R3.0 2,900 7,650 2,050 4,900 1,450 3,500 925 1,850 665 795
Application tip
ap : 0.2R ap : 0.1R
ae : 0.5D ae : 0.5D
ESPM4 series High Speed Cutting

Hardened steels
Conditions ~HRC40 HRC40~50 HRC50~55 HRC55~60 HRC60~65
Diameter (Ø) × R (mm) R.P.M Feed R.P.M Feed R.P.M Feed R.P.M Feed R.P.M Feed
3 × R0.5 22,000 16,000 17,000 10,000 12,500 8,000 9,500 4,600 6,900 2,500
4 × R0.5 17,000 17,500 13,000 12,000 11,000 9,200 8,000 5,500 5,600 2,900
6 × R0.5 13,500 18,500 10,500 13,800 9,000 11,000 6,400 6,400 4,500 3,600
6 × R1.0 13,500 18,500 10,500 13,800 9,000 11,000 6,400 6,400 4,500 3,600
8 × R1.0 10,000 18,500 8,000 14,000 6,800 11,000 4,800 6,700 3,400 4,100
8 × R2.0 10,000 18,500 8,000 14,000 6,800 11,000 4,800 6,700 3,400 4,100
10 × R1.0 8,000 18,500 6,400 14,000 5,400 11,000 3,800 6,800 2,700 3,800
10 × R2.0 8,000 18,500 6,400 14,000 5,400 11,000 3,800 6,800 2,700 3,800
12 × R2.0 6,600 18,500 5,300 14,000 4,500 11,000 3,200 7,000 2,250 3,600
12 × R3.0 6,600 18,500 5,300 14,000 4,500 11,000 3,200 7,000 2,250 3,600
Application tip
ap : 0.1R ap : 0.05R
ae : 0.3D ae : 0.3D
KORLOY 471
U-Star Endmill
UE502, UXE502 series
Alloy steels, Carbon steels Pre-hardened steels Stainless steels Hardened steels
Workpiece (SCM, SNCM, S45C) (NAK, CENA, KP4) (SUS) (SKD, SKT, STAVAX)
Conditions ~ 1100N/mm2 1100 ~ 1500N/mm2 1500 ~ 2000N/mm2
Diameter (Ø) R.P.M Feed R.P.M Feed R.P.M Feed R.P.M Feed
n (min -1) vf (mm/min) n (min -1) vf (mm/min) n (min -1) vf (mm/min) n (min -1) vf (mm/min)
2.0 11,560 190 7,560 120 6,300 90 5,040 35

3.0 8,920 210 5,560 140 4,620 120 3,360 40
4.0 7,560 300 4,620 180 3,880 150 2,940 40
5.0 6,300 320 3,780 190 3,160 160 2,320 50
6.0 5,560 350 3,360 220 2,840 180 2,000 55
8.0 4,200 380 2,520 200 2,100 180 1,680 75
10.0 3,260 330 2,000 160 1,680 160 1,360 60
12.0 2,740 280 1,680 130 1,360 130 1,160 55
16.0 2,200 220 1,360 110 1,060 110 900 40
20.0 1,680 170 1,060 80 840 80 680 30
25.0 1,360 130 840 70 680 60 540 20
Application tip
ap : 0.5D ap : 0.5D
(ap : UP to Ø3 : 0.2D)
472 KORLOY
UE512 series
Workpiece (SCM, SNCM, S45C) (NAK, CENA, KP4) (SKD, SKT, STAVAX)
Diameter Effective R.P.M Feed ap R.P.M Feed ap R.P.M Feed ap
(Ø) Length (mm) n (min -1) vf (mm/min) (mm) n (min -1) vf (mm/min) (mm) n (min -1) vf (mm/min) (mm)
0.1 0.3 50000 315 0.009 46200 230 0.007 40600 170 0.005
0.1 0.5 50000 315 0.006 46200 230 0.005 40600 170 0.004
0.1 1 45000 255 0.002 41580 185 0.002 36540 140 0.001
0.2 0.5 38500 380 0.018 36300 270 0.014 32100 200 0.01
0.2 1 38500 380 0.013 36300 270 0.010 32100 200 0.007
0.2 1.5 34650 310 0.007 32670 220 0.006 28890 160 0.004
0.2 2 34650 310 0.005 32670 220 0.004 28890 160 0.003
0.3 1 34200 390 0.019 32300 270 0.015 28500 230 0.011
0.3 1.5 34200 390 0.019 32300 270 0.015 25800 230 0.011
0.3 2 30780 315 0.011 29070 220 0.008 25650 185 0.006
0.3 2.5 30780 315 0.007 29070 220 0.005 25650 185 0.004
0.3 3 30780 315 0.007 29070 220 0.005 25650 185 0.004
0.3 4 27360 250 0.004 25840 175 0.003 22800 145 0.002
0.3 5 20520 165 0.003 19380 115 0.002 17100 95 0.002
0.4 1 27400 540 0.036 25800 380 0.028 22800 280 0.02
0.4 1.5 27400 540 0.025 25800 380 0.020 22800 280 0.014
0.4 2 27400 540 0.025 25800 380 0.020 22800 280 0.014
0.4 2.5 24660 435 0.014 23220 310 0.011 20520 225 0.008
0.4 3 24660 435 0.014 23220 310 0.011 20520 225 0.008
0.4 4 24660 435 0.009 23220 310 0.007 20520 225 0.005
0.4 5 21920 345 0.009 20640 245 0.007 18240 180 0.005
0.4 6 21920 345 0.005 20640 245 0.004 18240 180 0.003
0.4 8 16440 225 0.004 15480 160 0.003 13680 120 0.002
0.4 10 8220 95 0.004 7740 70 0.003 6840 50 0.002
0.5 1 27400 540 0.045 25800 425 0.035 22800 285 0.025
0.5 1.5 27400 540 0.045 25800 425 0.035 22800 285 0.025
0.5 2 27400 540 0.032 25800 425 0.025 22800 285 0.018
0.5 2.5 27400 540 0.032 25800 425 0.025 22800 285 0.018
0.5 3 24660 435 0.018 23220 345 0.014 20520 230 0.01
0.5 4 24660 435 0.018 23220 345 0.014 20520 230 0.01
0.5 5 24660 435 0.011 23220 345 0.009 20520 230 0.006
0.5 6 21920 345 0.011 20640 270 0.009 18240 180 0.006
0.5 8 16440 225 0.007 15480 180 0.005 13680 120 0.004
0.5 10 16440 225 0.005 15480 180 0.004 13680 120 0.003
0.5 12 8220 95 0.005 7740 75 0.004 6840 50 0.003
0.5 14 8220 95 0.005 7740 75 0.004 6840 50 0.003
0.5 16 2740 25 0.005 2580 20 0.004 2280 15 0.003
0.6 2 27400 775 0.038 25800 545 0.029 22800 405 0.021
0.6 3 27400 775 0.038 25800 545 0.029 22800 405 0.021
0.6 4 24660 630 0.022 23220 440 0.017 20520 330 0.012
0.6 5 24660 630 0.014 23220 440 0.011 20520 330 0.008
0.6 6 24660 630 0.014 23220 440 0.011 20520 330 0.008
0.6 8 21920 495 0.008 20640 350 0.006 18240 260 0.005
KORLOY 473
U-Star Endmill
UE512 series
0.6 10 16440 325 0.005 15480 230 0.004 13680 170 0.003
0.6 12 16440 325 0.005 15480 230 0.004 13680 170 0.003
0.6 14 8220 140 0.005 7740 100 0.004 6840 75 0.003
0.6 16 8220 140 0.005 7740 100 0.004 6840 75 0.003
0.7 2 27400 775 0.063 25800 545 0.049 22800 405 0.035
0.7 4 24660 630 0.025 23220 440 0.020 20520 330 0.014
0.7 6 24660 630 0.016 23220 440 0.012 20520 330 0.009
0.7 8 21920 495 0.016 20640 350 0.012 18240 260 0.009
0.7 10 21920 495 0.009 20640 350 0.007 18240 260 0.005
0.7 12 16440 325 0.009 15480 230 0.005 13680 170 0.004
0.8 2 27400 775 0.072 25800 605 0.056 22800 450 0.040
0.8 3 27400 775 0.050 25800 605 0.039 22800 450 0.028
0.8 4 27400 775 0.050 25800 605 0.039 22800 450 0.028
0.8 5 24660 630 0.029 23220 490 0.022 20520 365 0.016
0.8 6 24660 630 0.029 23220 490 0.022 20520 365 0.016
0.8 8 24660 630 0.018 23220 490 0.014 20520 365 0.010
0.8 10 21920 495 0.018 20640 385 0.014 18240 290 0.01
0.8 12 21920 495 0.011 20640 385 0.008 18240 290 0.006
0.8 14 16440 325 0.007 15480 255 0.006 13680 190 0.004
0.8 16 16440 325 0.007 15480 255 0.006 13680 190 0.004
0.8 20 8220 140 0.007 7740 110 0.006 6840 80 0.004
0.9 6 22140 575 0.032 20970 440 0.025 18450 330 0.018
0.9 8 22140 575 0.020 20970 440 0.016 18450 330 0.011
0.9 10 19680 455 0.020 18640 350 0.016 16400 260 0.011
1.0 2 24600 1045 0.090 23300 890 0.070 20500 665 0.050
1.0 3 24600 1045 0.090 23300 890 0.070 20500 665 0.050
1.0 4 24600 1045 0.063 23300 890 0.049 20500 665 0.035
1.0 5 24600 1045 0.063 23300 890 0.049 20500 665 0.035
1.0 6 22140 845 0.036 20970 720 0.028 18450 540 0.020
1.0 7 22140 845 0.036 20970 720 0.028 18450 540 0.020
1.0 8 22140 845 0.036 20970 720 0.028 18450 540 0.020
1.0 10 22140 845 0.023 20970 720 0.018 18450 540 0.013
1.0 12 19680 670 0.023 18640 570 0.018 16400 425 0.013
1.0 14 19680 670 0.014 18640 570 0.011 16400 425 0.008
1.0 16 14760 440 0.014 13980 375 0.011 12300 280 0.008
1.0 18 14760 440 0.009 13980 375 0.007 12300 280 0.005
1.0 20 14760 440 0.009 13980 375 0.007 12300 280 0.005
1.0 22 7380 190 0.009 6990 160 0.007 6150 120 0.005
1.0 26 7380 190 0.009 6990 160 0.007 6150 120 0.005
1.0 30 7380 190 0.009 6990 160 0.007 6150 120 0.005
1.0 40 2460 50 0.009 2330 45 0.007 2050 35 0.005
1.0 50 2460 50 0.006 2330 45 0.005 2050 35 0.003
1.2 4 21900 930 0.076 20700 720 0.059 18200 485 0.042
474 KORLOY
UE512 series
1.2 6 21900 930 0.076 20700 720 0.059 18200 485 0.042
1.2 8 19710 755 0.043 18630 585 0.034 16380 395 0.024
1.2 10 19710 755 0.027 18630 585 0.021 16380 395 0.015
1.2 12 19710 755 0.027 18630 585 0.021 16380 395 0.015
1.2 14 17520 595 0.027 16560 460 0.021 14560 310 0.015
1.2 16 17520 595 0.016 16560 460 0.013 14560 310 0.009
1.2 20 13140 390 0.011 12420 300 0.008 10920 205 0.006
1.2 26 6570 165 0.011 6210 130 0.008 5460 85 0.006
1.2 30 6570 165 0.011 6210 130 0.008 5460 85 0.006
1.4 6 19200 815 0.088 18100 570 0.069 16000 425 0.049
1.4 8 17280 660 0.050 16290 460 0.039 14400 345 0.028
1.4 10 17280 660 0.050 16290 460 0.039 14400 345 0.028
1.4 14 17280 660 0.032 16290 460 0.025 14400 345 0.018
1.4 16 15360 520 0.032 14480 365 0.025 12800 270 0.018
1.4 20 15360 520 0.019 14480 365 0.015 12800 270 0.011
1.5 4 19200 905 0.135 18100 635 0.105 16000 475 0.075
1.5 5 19200 905 0.095 18100 635 0.074 16000 475 0.053
1.5 6 19200 905 0.095 18100 635 0.074 16000 475 0.053
1.5 7 19200 905 0.095 18100 635 0.074 16000 475 0.053
1.5 8 17280 735 0.054 16290 515 0.042 14400 385 0.030
1.5 10 17280 735 0.054 16290 515 0.042 14400 385 0.03
1.5 12 17280 735 0.054 16290 515 0.042 14400 385 0.030
1.5 14 17280 735 0.034 16290 515 0.026 14400 385 0.019
1.5 16 15360 580 0.034 14480 405 0.026 12800 305 0.019
1.5 18 15360 580 0.034 14480 405 0.026 12800 305 0.019
1.5 20 15360 580 0.020 14480 405 0.016 12800 305 0.011
1.5 22 15360 580 0.020 14480 405 0.016 12800 305 0.011
1.5 26 11520 380 0.014 10860 265 0.011 9600 200 0.008
1.5 30 11520 380 0.014 10860 265 0.011 9600 200 0.008
1.6 8 17800 840 0.101 16800 655 0.078 14800 490 0.056
1.6 10 16020 680 0.058 15120 530 0.045 13320 395 0.032
1.6 12 16020 680 0.058 15120 530 0.045 13320 395 0.032
1.6 16 16020 680 0.036 15120 530 0.028 13320 395 0.020
1.6 20 14240 540 0.036 13440 420 0.028 11840 315 0.020
1.8 8 17800 840 0.113 16800 655 0.088 14800 490 0.063
1.8 10 16020 680 0.065 15120 530 0.050 13320 395 0.036
1.8 12 16020 680 0.065 15120 530 0.050 13320 395 0.036
1.8 16 16020 680 0.041 15120 530 0.032 13320 395 0.023
1.8 20 14240 540 0.041 13440 420 0.032 11840 315 0.023
2.0 6 14400 820 0.180 13600 620 0.140 12000 475 0.100
2.0 8 14400 820 0.126 13600 620 0.098 12000 475 0.070
2.0 10 14400 820 0.126 13600 620 0.098 12000 475 0.070
2.0 12 12960 665 0.072 12240 500 0.056 10800 385 0.040
KORLOY 475
U-Star Endmill
UE512 series
2.0 14 12960 665 0.072 12240 500 0.056 10800 385 0.040
2.0 16 12960 665 0.072 12240 500 0.056 10800 385 0.040
2.0 18 12960 665 0.045 12240 500 0.035 10800 385 0.025
2.0 20 12960 665 0.045 12240 500 0.035 10800 385 0.025
2.0 22 11520 525 0.045 10880 395 0.035 9600 305 0.025
2.0 26 11520 525 0.045 10880 395 0.035 9600 305 0.025
2.0 30 11520 525 0.027 10880 395 0.021 9600 305 0.015
2.0 35 8640 345 0.018 8160 260 0.014 7200 200 0.010
2.0 40 8640 345 0.018 8160 260 0.014 7200 200 0.010
2.0 45 4320 150 0.018 4080 110 0.014 3600 85 0.010
2.0 50 4320 150 0.018 4080 110 0.014 3600 85 0.010
2.0 60 4320 150 0.018 4080 110 0.014 3600 85 0.010
2.5 8 12300 970 0.158 11600 680 0.123 10300 510 0.088
2.5 10 12300 970 0.158 11600 680 0.123 10300 510 0.088
2.5 12 12300 970 0.158 11600 680 0.123 10300 510 0.088
2.5 14 11070 785 0.090 10440 550 0.070 9270 415 0.050
2.5 16 11070 785 0.090 10440 550 0.070 9270 415 0.050
2.5 18 11070 785 0.090 10440 550 0.070 9270 415 0.050
2.5 20 11070 785 0.090 10440 550 0.070 9270 415 0.050
2.5 22 11070 785 0.056 10440 550 0.044 9270 415 0.031
2.5 26 9840 620 0.056 9280 435 0.044 8240 325 0.031
2.5 30 9840 620 0.056 9280 435 0.044 8240 325 0.031
2.5 35 9840 620 0.034 9280 435 0.026 8240 325 0.019
2.5 40 7380 405 0.034 6960 285 0.026 6180 215 0.019
2.5 45 7380 405 0.023 6960 285 0.018 6180 215 0.013
2.5 50 7380 405 0.023 6960 285 0.018 6180 215 0.013
3.0 6 10900 860 0.270 10300 605 0.210 6600 450 0.150
3.0 8 10900 860 0.270 10300 605 0.210 6600 450 0.150
3.0 10 10900 860 0.189 10300 605 0.147 6600 450 0.105
3.0 12 10900 860 0.189 10300 605 0.147 6600 450 0.105
3.0 14 10900 860 0.189 10300 605 0.147 6600 450 0.105
3.0 16 9810 695 0.108 9270 490 0.084 5940 365 0.060
3.0 18 9810 695 0.108 9270 490 0.084 5940 365 0.060
3.0 20 9810 695 0.108 9270 490 0.084 5940 365 0.060
3.0 22 9810 695 0.108 9270 490 0.084 5940 365 0.060
3.0 26 9810 695 0.068 9270 490 0.053 5940 365 0.038
3.0 30 9810 695 0.068 9270 490 0.053 5940 365 0.038
3.0 35 8720 550 0.068 8240 385 0.053 5280 290 0.038
3.0 40 8720 550 0.041 8240 385 0.032 5280 290 0.023
3.0 45 8720 550 0.041 8240 385 0.032 5280 290 0.023
3.0 50 6540 360 0.027 6180 255 0.021 3960 190 0.015
3.0 60 6540 360 0.027 6180 255 0.021 3960 190 0.015
4.0 8 8000 1300 0.360 7600 1160 0.280 6700 770 0.200
476 KORLOY
UE512 series
4.0 10 8000 1300 0.360 7600 1160 0.280 6700 770 0.200
4.0 12 8000 1300 0.360 7600 1160 0.280 6700 770 0.200
4.0 14 8000 1300 0.252 7600 1160 0.196 6700 770 0.140
4.0 16 8000 1300 0.252 7600 1160 0.196 6700 770 0.140
4.0 18 8000 1300 0.252 7600 1160 0.196 6700 770 0.140
4.0 20 8000 1300 0.252 7600 1160 0.196 6700 770 0.140
4.0 22 7200 1055 0.144 6840 940 0.112 6030 625 0.080
4.0 26 7200 1055 0.144 6840 940 0.112 6030 625 0.080
4.0 30 7200 1055 0.144 6840 940 0.112 6030 625 0.080
4.0 35 7200 1055 0.090 6840 940 0.070 6030 625 0.050
4.0 40 7200 1055 0.090 6840 940 0.070 6030 625 0.050
4.0 45 6400 830 0.090 6080 740 0.070 5360 495 0.050
4.0 50 6400 830 0.090 6080 740 0.070 5360 495 0.050
4.0 60 6400 830 0.054 6080 740 0.042 5360 495 0.030
5.0 16 6400 1155 0.315 6100 900 0.245 5400 605 0.175
5.0 20 6400 1155 0.315 6100 900 0.245 5400 605 0.175
5.0 26 5760 935 0.180 5490 730 0.140 4860 490 0.100
5.0 30 5760 935 0.180 5490 730 0.140 4860 490 0.100
5.0 35 5760 935 0.180 5490 730 0.140 4860 490 0.100
5.0 40 5760 935 0.180 5490 730 0.140 4860 490 0.100
5.0 50 5760 935 0.113 5490 730 0.088 4860 490 0.063
5.0 60 5120 740 0.113 4880 575 0.088 4320 385 0.063
6.0 15 5300 1055 0.540 5000 820 0.420 4400 550 0.300
6.0 20 5300 1055 0.378 5000 820 0.294 4400 550 0.210
6.0 30 5300 1055 0.378 5000 820 0.294 4400 550 0.210
6.0 32 4770 855 0.216 4500 665 0.168 3960 445 0.120
8.0 25 4000 950 0.504 3800 750 0.392 3300 500 0.280
8.0 30 4000 950 0.504 3800 750 0.392 3300 500 0.280
8.0 42 3600 770 0.288 3400 605 0.224 2950 405 0.160
10 30 3200 900 0.900 3050 680 0.700 2630 400 0.500
10 35 3200 900 0.630 3050 680 0.490 2630 400 0.350
10 45 3200 900 0.630 3050 680 0.490 2630 400 0.350
12 35 2650 800 1.080 2520 600 0.840 2180 350 0.600
12 40 2650 800 0.756 2520 600 0.588 2180 350 0.420
12 50 2650 800 0.756 2520 600 0.588 2180 350 0.420
Application tip
ap
KORLOY 477
U-Star Endmill
UE522 series
Diameter (Ø) R.P.M Feed R.P.M Feed R.P.M Feed

n (min -1) vf (mm/min) n (min -1) vf (mm/min) n (min -1) vf (mm/min)
2.0 6,300 60 5,040 50 3,150 25

3.0 4,410 70 3,570 60 2,200 30
4.0 3,570 85 2,840 70 1,790 35
5.0 3,050 105 2,420 85 1,580 40
6.0 2,630 125 2,100 105 1,370 50
8.0 2,000 135 1,580 105 1,050 50
10.0 1,680 135 1,370 105 840 50
12.0 1,370 105 1,160 95 700 40
16.0 1,160 95 890 75 560 35
20.0 840 70 680 50 420 25
Application tip
ap : 0.3D ap : 0.5D
(ap : UP to Ø3.0 : 0.4mm)
UE504H series

1.0 45,000 750 37,000 560 23,000 300

2.0 23,500 800 18,000 540 12,000 360
3.0 15,750 810 12,600 580 8,280 380
4.0 12,150 830 9,540 600 6,345 400
6.0 9,450 900 7,470 640 4,950 440
8.0 7,110 860 5,625 620 3,780 410
10.0 5,580 800 4,410 570 2,925 380
12.0 4,770 800 3,780 570 2,520 380
16.0 3,600 810 2,900 570 2,000 400
20.0 3,000 810 2,300 570 1,600 400
Application tip
ap : 1.0D
ae : 0.03D
478 KORLOY
UE514 series
1.0 22,000 310 13,500 180 10,750 140 8,500 50

1.5 17,000 320 10,700 190 8,500 150 6,500 50
2.0 13,900 330 9,070 200 7,560 165 6,000 60
2.5 12,000 350 7,600 220 6,000 180 4,500 60
3.0 10,700 380 6,670 240 5,110 200 4,030 70
4.0 9,070 680 5,540 420 4,650 330 3,530 70
5.0 7,560 720 4,530 430 3,800 360 2,780 85
6.0 6,670 790 4,030 490 3,400 390 2,400 95
8.0 5,040 850 3,020 450 2,520 420 2,010 130
10.0 3,910 730 2,400 360 2,010 360 1,630 105
12.0 3,300 620 2,010 300 1,630 280 1,400 95
Application tip
ap : 1.0D
ae : 0.02D
UE524 series

2.0 6,300 100 5,040 80 3,150 45

3.0 4,410 115 3,570 100 2,200 55
4.0 3,570 140 2,840 115 1,790 60
5.0 3,050 180 2,420 140 1,580 70
6.0 2,630 215 2,100 180 1,370 90
8.0 2,000 230 1,580 180 1,050 90
10.0 1,680 230 1,370 180 840 90
12.0 1,370 180 1,160 160 700 70
16.0 1,160 160 890 125 560 60
20.0 840 115 680 90 420 45
Application tip
ap : 2.5D ap : 2.0D
ae : 0.05D ae : 0.02D
KORLOY 479
U-Star Endmill
ULE504 series General processing
Non-ferrous steel
Workpiece Heat treatment steel Stainless steel
Alloy steel, Cast iron
2.0 12,100 320 7,900 195 2,700 47 6,600 160

3.0 9,400 370 5,840 230 2,000 58 4,850 195
4.0 7,900 655 4,850 405 1,500 58 4,070 320
5.0 6,600 690 3,970 415 1,300 58 3,320 345
6.0 5,830 760 3,530 470 1,150 58 2,980 380
8.0 4,410 815 2,650 435 880 58 2,200 405
10.0 3,420 700 2,100 345 720 46 1,760 345
12.0 2,880 600 1,760 290 590 46 1,430 275
16.0 2,310 470 1,430 230 460 29 1,150 230
20.0 1,760 370 1,110 185 340 29 880 175
25.0 1,430 290 880 150 270 23 715 140
Application tip
ap : 1.0D ap : 1.0D
ae : 0.1D ae : 0.02D
UE504, UXE504 series

2 2 2
Conditions ~ 1100N/mm 1100 ~ 1500N/mm 1500 ~ 2000N/mm 1500 ~ 2000N/mm2
2.0 11,560 280 7,560 170 6,300 140 6,300 5,040

3.0 8,920 320 5,560 200 4,620 170 4,620 3,360
4.0 7,560 570 4,620 350 3,880 280 3,880 2,940
5.0 6,300 600 3,780 360 3,160 300 3,160 2,320
6.0 5,560 660 3,360 410 2,840 330 2,840 2,000
8.0 4,200 710 2,520 380 2,100 350 2,100 1,680
10.0 3,260 610 2,000 300 1,680 300 1,680 1,360
12.0 2,740 520 1,680 250 1,360 240 1,360 1,160
16.0 2,200 410 1,360 200 1,100 300 1,100 900
20.0 1,680 320 1,060 160 840 150 840 680
25.0 1,360 250 840 130 680 120 680 540
Application tip
ap : 1.0D
ae : 0.05D
480 KORLOY
UE506 series General processing


6.0 5,560 2,000 3,880 1,370 1,580 210

8.0 4,200 2,000 2,940 1,370 1,160 210
10.0 3,360 2,000 2,320 1,370 1,000 210
12.0 2,840 1,680 2,000 1,160 840 180
16.0 2,100 1,260 1,480 880 640 130
20.0 1,680 1,010 1,160 690 500 110
25.0 1,500 90 1,100 600 430 90
Application tip
ap : 1.5D ap : 1.5D ap : 1.0D
ae : 0.1D ae : 0.05D ae : 0.05D
UE506 series High speed processing

Alloy steels, Carbon steels Hardened steels
Workpiece (SCM, SNCM, S45C) (SKD, SKT, STAVAX)
Strength ~HRC35 HRC45~55
2
Conditions ~ 1100N/mm 1500 ~ 2000N/mm2
Diameter (Ø) R.P.M Feed R.P.M Feed

n (min -1) vf (mm/min) n (min -1) vf (mm/min)
6.0 16,800 6,090 8,400 3,050

8.0 12,600 6,090 6,300 3,050
10.0 9,980 5,990 5,040 3,050
12.0 8,400 5,040 4,200 2,520
16.0 6,300 3,780 3,160 1,890
20.0 5,040 3,050 2,520 1,470
25.0 4,500 2,700 2,200 1,300
Application tip
ap : 1.5D ap : 1.0D
ae : 0.05D ae : 0.05D
KORLOY 481
U-Star Endmill
UTE502 series
Alloy steels, Carbon steels Pre-hardened steels
Workpiece (SCM, SNCM, S45C) (NAK, CENA, KP4)
Conditions ~ 1100N/mm2 1100 ~ 1500N/mm2

0.3 45,000 135 35,000 105

0.4 36,000 144 27,900 113
0.6 25,200 144 18,900 113
0.8 18,000 144 13,950 108
1.0 14,850 149 11,250 113
2.0 7,560 153 5,670 113
3.0 3,969 108 3,213 90
4.0 3,213 126 2,556 104
6.0 2,367 189 1,890 153
8.0 1,800 225 1,422 162
10.0 1,440 225 1,170 167
Application tip
ap : 2.5D
5D
ae : 0.0
UTE504 series

3.0 3,969 216 3,213 180

4.0 3,213 252 2,556 207
6.0 2,367 378 1,890 306
8.0 1,800 450 1,422 324
10.0 1,440 450 1,170 333
Application tip
ap : 2.5D
5D
ae : 0.0
482 KORLOY
UR502 series

0.2 44,000 145 28,800 60 17,600 40

0.3 41,000 170 27,000 70 16,500 45
0.4 41,000 170 27,000 70 16,500 45
0.5 36,000 190 23,400 80 14,300 50
0.6 30,000 210 19,800 90 12,100 55
0.8 30,000 210 19,800 90 12,100 55
1.0 27,600 240 18,000 100 11,000 60
1.5 22,000 250 13,500 110 8,500 60
2.0 18,000 260 11,560 120 7,200 70
2.5 15,000 270 9,500 130 6,100 70
3.0 13,240 280 8,560 140 5,280 70
4.0 10,720 340 6,820 170 4,300 80
5.0 9,160 420 5,800 200 3,800 100
6.0 7,900 500 5,040 250 3,280 120
8.0 6,000 540 3,800 250 2,520 120
10.0 5,040 540 3,280 250 2,020 120
12.0 4,120 420 2,780 230 1,680 100
16.0 3,100 360 2,100 170 1,280 80
20.0 2,520 280 1,640 120 1,000 60
Application tip
ap : 0.2D ap : 0.05D
KORLOY 483
U-Star Endmill
UR504, UR512 series

3.0 4,410 115 3,570 100 2,200 55

4.0 3,570 140 2,840 115 1,790 60
5.0 3,050 180 2,420 140 1,580 70
6.0 2,630 215 2,100 180 1,370 85
8.0 2,000 230 1,580 180 1,050 85
10.0 1,680 230 1,370 180 840 85
12.0 1,370 180 1,160 160 700 70
16.0 1,160 160 890 125 560 60
20.0 840 115 680 90 420 45
Application tip
ap : 2.0D ap : 2.0D
ae : 0.05D ae : 0.02D
UR542 series

0.2 50,000 170 34,500 75 21,150 45

0.3 50,000 200 32,000 85 20,000 50
0.4 50,000 200 32,000 85 20,000 50
0.5 43,000 220 28,000 95 17,100 60
0.6 36,400 250 24,000 110 14,500 65
0.8 36,400 250 24,000 110 14,500 65
1.0 33,100 280 21,600 120 13,200 70
1.5 26,400 300 16,200 130 10,200 70
2.0 21,600 310 13,800 140 8,640 80
2.5 18,000 320 11,400 150 7,320 80
3.0 15,900 330 10,300 160 6,300 80
4.0 12,800 400 8,200 200 5,150 95
5.0 11,000 500 7,000 240 4,560 120
6.0 9,500 600 6,000 300 3,930 140
8.0 7,200 640 4,550 300 3,020 140
10.0 6,000 640 4,000 300 2,420 140
12.0 5,000 500 3,340 270 2,000 120
16.0 3,720 450 2,520 210 1,540 95
20.0 3,000 330 1,950 140 1,200 70
Application tip
ap : 0.2D ap : 0.05D
484 KORLOY
UR544, UXR514 series


1.0 33,100 360 21,600 260 13,200 140

1.5 26,400 370 16,200 270 10,200 140
2.0 21,600 380 13,800 280 8,640 150
2.5 18,000 390 11,400 300 7,320 150
3.0 15,900 400 10,300 310 6,300 150
4.0 12,800 500 8,200 360 5,150 160
5.0 11,000 510 7,000 430 4,560 200
6.0 9,500 510 6,000 430 3,930 200
8.0 7,200 550 4,550 430 3,020 200
10.0 6,000 550 4,000 430 2,420 200
12.0 5,000 430 3,340 380 2,000 160
16.0 3,720 330 2,520 280 1,540 135
20.0 3,000 270 1,950 210 1,200 100
Application tip
ap : 1.0D
ae : 0.02D
KORLOY 485
U-Star Endmill
UXR504 series

1.0 27,600 300 18,000 220 11,000 120

1.5 22,000 310 13,500 230 8,500 120
2.0 18,000 320 11,560 240 7,200 130
2.5 15,000 330 9,500 250 6,100 130
3.0 13,240 340 8,560 260 5,280 130
4.0 10,720 420 6,820 300 4,300 140
5.0 9,160 430 5,800 360 3,800 170
6.0 7,900 430 5,040 360 3,280 170
8.0 6,000 460 3,800 360 2,520 170
10.0 5,040 460 3,280 360 2,020 170
12.0 4,120 360 2,780 320 1,680 140
16.0 3,100 280 2,100 230 1,280 115
20.0 2,520 230 1,640 180 1,000 90
Application tip
ap : 2.0D ap : 2.0D
ae : 0.05D ae : 0.02D
UR506 series
2 2
Conditions ~ 1100N/mm 1100 ~ 1500N/mm 1500 ~ 2000N/mm2

6.0 14,880 3,210 14,100 2,940 9,600 2,940

8.0 12,000 3,300 11,400 3,000 7,200 2,760
10.0 9,600 2,940 9,300 2,700 5,700 2,460
12.0 7,800 2,700 7,500 2,460 4,800 2,280
16.0 6,000 2,400 5,820 2,220 3,600 2,040
20.0 4,800 2,010 4,680 2,040 2,880 1,920
Application tip
ap : 1.5D ap : 1.5D
ae : 0.05D ae : 0.02D
486 KORLOY
UDR503 series General processing


6.0 5,100 3,500 5,500 3,750 3,850 2,700

8.0 3,800 3,400 4,150 3,700 2,850 2,550
10.0 3,800 3,750 3,600 3,500 2,700 2,700
12.0 3,200 4,200 3,250 4,250 2,250 2,300
16.0 2,400 3,100 2,250 2,900 1,700 1,750
20.0 1,900 2,500 1,800 2,350 1,350 1,400
Application tip
ap : 0.03D ap : 0.03D
ae : 0.5D ae : 0.3D
UDR503 series High speed processing

2 2
Conditions ~ 1100N/mm 1100 ~ 1500N/mm 1500 ~ 2000N/mm2

6.0 8,300 5,700 7,650 5,250 6,400 4,550

8.0 6,200 5,550 5,750 5,100 5,250 4,700
10.0 5,750 5,650 5,000 4,900 4,200 4,250
12.0 4,800 6,300 4,150 5,450 3,500 3,650
16.0 3,600 4,700 3,100 4,050 2,650 2,700
20.0 2,900 3,750 2,500 3,250 2,100 2,150
Application tip
ap : 0.03D ap : 0.03D
ae : 0.5D ae : 0.3D
KORLOY 487
U-Star Endmill
USPM4 series

1.0 49000 7650 40000 6500 35000 5750

1.5 37000 8550 30000 7200 27000 6400
2.0 29700 9000 24300 7560 21600 6750
3.0 19800 9900 16200 8100 14400 7650
4.0 15300 10800 12600 8550 10800 7920
6.0 9900 11700 8100 9900 7200 8640
8.0 7380 11700 6300 9900 5400 8640
10.0 5850 10800 4950 9000 4320 8550
12.0 4950 10800 4140 9000 3690 8100
16.0 3690 9000 3060 7920 2700 7020
20.0 2970 7200 2430 6300 2160 5670
Application tip
ap : 0.02D ap : 0.015D
ae : 0.4D ae : 0.4D
UTR504 series
Diameter (Ø) R.P.M Feed Ap R.P.M Feed Ap R.P.M Feed Ap

n (min -1) vf (mm/min) (mm) n (min -1) vf (mm/min) (mm) n (min -1) vf (mm/min) (mm)
0.4 40,000 630 0.008~0.016 32,000 450 0.008~0.012 22,000 270 0.004~0.008
0.6 30,000 630 0.012~0.024 23,000 450 0.012~0.018 15,000 270 0.006~0.012
0.8 22,500 630 0.016~0.032 17,000 450 0.016~0.024 11,500 270 0.008~0.016
1.0 18,000 630 0.020~0.040 13,500 450 0.020~0.030 9,000 270 0.010~0.020
1.2 14,400 630 0.025~0.050 11,700 450 0.025~0.040 7,200 270 0.012~0.025
1.5 11,700 630 0.030~0.060 9,000 450 0.030~0.050 5,850 270 0.015~0.030
2.0 9,000 630 0.040~0.080 7,200 450 0.040~0.060 4,500 270 0.020~0.040
Application tip
ap
488 KORLOY
UB502---P series

0.1 40,000 550 40,000 500 33,000 400

0.2 30,000 720 30,000 630 27,000 575
0.3 30,000 900 30,000 810 27,000 720
0.4 30,000 1,140 30,000 1,020 27,000 900
0.5 30,000 1,440 30,000 1,260 27,000 1,140
0.6 30,000 1,740 30,000 1,500 27,000 1,320
0.8 30,000 2,340 30,000 1,980 27,000 1,800
1.0 30,000 2,880 30,000 2,520 27,000 2,280
1.2 30,000 3,060 28,800 2,580 25,800 2,310
1.5 30,000 3,240 28,800 2,700 25,800 2,400
2.0 29,820 3,420 28,680 2,880 24,000 2,400
3.0 19,860 3,600 19,080 3,180 15,900 2,400
4.0 14,940 3,600 14,340 3,180 12,000 2,400
5.0 11,160 3,480 10,680 2,940 9,000 2,250
6.0 8,340 2,910 8,040 2,460 6,600 1,860
8.0 6,660 2,520 6,420 2,100 5,400 1,620
10.0 5,580 2,220 5,340 1,860 4,500 1,440
12.0 4,170 1,770 4,008 1,500 3,360 1,140
16.0 3,340 1,590 3,210 1,320 2,700 1,020
20.0 2,670 1,410 2,580 1,170 2,160 900
25.0 2,130 1,150 2,060 950 1,730 730
Application tip
ae : 0.05D
ap : 0.03D
KORLOY 489
U-Star Endmill
UB512, UB512S6 series
0.1 0.2 50000 240 0.009 50000 215 0.007 50000 190 0.005
0.1 0.3 50000 240 0.009 50000 215 0.007 50000 190 0.005
0.1 0.5 50000 240 0.006 50000 215 0.005 50000 190 0.004
0.1 1 45000 195 0.002 45000 175 0.002 45000 155 0.001
0.2 0.5 50000 335 0.018 50000 310 0.014 43200 260 0.010
0.2 1 50000 335 0.013 50000 310 0.010 43200 260 0.007
0.2 1.5 45000 270 0.007 45000 250 0.006 38880 210 0.004
0.2 2 45000 270 0.005 45000 250 0.004 38880 210 0.003
0.2 3 45000 270 0.003 45000 250 0.003 38880 210 0.002
0.3 1 50000 475 0.019 50000 430 0.015 42800 365 0.011
0.3 1.5 50000 475 0.019 50000 430 0.015 42800 365 0.011
0.3 2 45000 385 0.011 45000 350 0.008 38520 295 0.006
0.3 2.5 45000 385 0.007 45000 350 0.005 38520 295 0.004
0.3 3 45000 385 0.007 45000 350 0.005 38520 295 0.004
0.3 4 40000 305 0.004 40000 275 0.003 34240 235 0.002
0.3 5 30000 200 0.003 30000 180 0.002 25680 155 0.002
0.4 1 41000 490 0.036 38800 425 0.028 34200 340 0.020
0.4 1.5 41000 490 0.025 38800 425 0.020 34200 340 0.014
0.4 2 41000 490 0.025 38800 425 0.020 34200 340 0.014
0.4 2.5 36900 395 0.014 34920 345 0.011 30780 275 0.008
0.4 3 36900 395 0.014 34920 345 0.011 30780 275 0.008
0.4 4 36900 395 0.009 34920 345 0.007 30780 275 0.005
0.4 5 32800 315 0.009 31040 270 0.007 27360 220 0.005
0.4 6 32800 315 0.005 31040 270 0.004 27360 220 0.003
0.4 8 24600 205 0.004 23280 180 0.003 20520 145 0.002
0.4 10 12300 90 0.004 11640 75 0.003 10260 60 0.002
0.5 1 34200 685 0.045 32300 580 0.035 28500 515 0.025
0.5 1.5 34200 685 0.045 32300 580 0.035 28500 515 0.025
0.5 2 34200 685 0.032 32300 580 0.025 28500 515 0.018
0.5 2.5 34200 685 0.032 32300 580 0.025 28500 515 0.018
0.5 3 30780 555 0.018 29070 470 0.014 25650 415 0.010
0.5 4 30780 555 0.018 29070 470 0.014 25650 415 0.010
0.5 5 30780 555 0.011 29070 470 0.009 25650 415 0.006
0.5 6 27360 440 0.011 25840 370 0.009 22800 330 0.006
0.5 8 20520 290 0.007 19380 245 0.005 17100 215 0.004
0.5 10 20520 290 0.005 19380 245 0.004 17100 215 0.003
0.5 12 10260 125 0.005 9690 105 0.004 8550 95 0.003
0.5 14 10260 125 0.005 9690 105 0.004 8550 95 0.003
0.5 16 3420 35 0.005 3230 30 0.004 2850 25 0.003
0.6 1 34200 1025 0.038 32300 840 0.029 28500 685 0.021
0.6 2 34200 1025 0.038 32300 840 0.029 28500 685 0.021
0.6 3 34200 1025 0.038 32300 840 0.029 28500 685 0.021
0.6 4 30780 830 0.022 29070 680 0.017 25650 555 0.012
490 KORLOY

0.6 5 30780 830 0.014 29070 680 0.011 25650 555 0.008
0.6 6 30780 830 0.014 29070 680 0.011 25650 555 0.008
0.6 8 27360 655 0.008 25840 540 0.006 22800 440 0.005
0.6 10 20520 430 0.005 19380 355 0.004 17100 290 0.003
0.6 12 20520 430 0.005 19380 355 0.004 17100 290 0.003
0.6 14 10260 185 0.005 9690 150 0.004 8550 125 0.003
0.6 16 10260 185 0.005 9690 150 0.004 8550 125 0.003
0.7 2 34200 1130 0.063 32300 930 0.049 28500 765 0.035
0.7 4 30780 915 0.025 29070 755 0.020 25650 620 0.014
0.7 6 30780 915 0.016 29070 755 0.012 25650 620 0.009
0.7 8 27360 725 0.016 25840 595 0.012 22800 490 0.009
0.7 10 27360 725 0.009 25840 595 0.007 22800 490 0.005
0.7 12 20520 475 0.006 19380 390 0.005 17100 320 0.004
0.8 2 34200 1230 0.072 32300 1035 0.056 28500 855 0.040
0.8 3 34200 1230 0.050 32300 1035 0.039 28500 855 0.028
0.8 4 34200 1230 0.050 32300 1035 0.039 28500 855 0.028
0.8 5 30780 995 0.029 29070 840 0.022 25650 695 0.016
0.8 6 30780 995 0.029 29070 840 0.022 25650 695 0.016
0.8 8 30780 995 0.018 29070 840 0.014 25650 695 0.010
0.8 10 27360 785 0.018 25840 660 0.014 22800 545 0.010
0.8 12 27360 785 0.011 25840 660 0.008 22800 545 0.006
0.8 14 20520 515 0.007 19380 435 0.006 17100 360 0.004
0.8 16 20520 515 0.007 19380 435 0.006 17100 360 0.004
0.8 20 10260 220 0.007 9690 185 0.006 8550 155 0.004
0.9 4 29250 1120 0.032 27630 935 0.025 24390 775 0.018
0.9 6 29250 1120 0.032 27630 935 0.025 24390 775 0.018
0.9 8 29250 1120 0.020 27630 935 0.016 24390 775 0.011
0.9 10 26000 885 0.020 24560 740 0.016 21680 610 0.011
1.0 2 30800 1540 0.090 29100 1310 0.070 25700 1075 0.050
1.0 3 30800 1540 0.090 29100 1310 0.070 25700 1075 0.050
1.0 4 30800 1540 0.063 29100 1310 0.049 25700 1075 0.035
1.0 5 30800 1540 0.063 29100 1310 0.049 25700 1075 0.035
1.0 6 27720 1245 0.036 26190 1060 0.028 23130 870 0.020
1.0 7 27720 1245 0.036 26190 1060 0.028 23130 870 0.020
1.0 8 27720 1245 0.036 26190 1060 0.028 23130 870 0.020
1.0 10 27720 1245 0.023 26190 1060 0.018 23130 870 0.013
1.0 12 24640 985 0.023 23280 840 0.018 20560 690 0.013
1.0 14 24640 985 0.014 23280 840 0.011 20560 690 0.008
1.0 16 18480 645 0.014 17460 550 0.011 15420 450 0.008
1.0 18 18480 645 0.009 17460 550 0.007 15420 450 0.005
1.0 20 18480 645 0.009 17460 550 0.007 15420 450 0.005
1.0 22 9240 275 0.009 8730 235 0.007 7710 195 0.005
1.0 26 9240 275 0.009 8730 235 0.007 7710 195 0.005
KORLOY 491
U-Star Endmill
1.0 30 9240 275 0.009 8730 235 0.007 7710 195 0.005
1.0 40 3080 75 0.009 2910 65 0.007 2570 55 0.005
1.0 50 3080 75 0.006 2910 65 0.005 2570 55 0.003
1.2 4 26300 1375 0.076 24800 1150 0.059 21900 950 0.042
1.2 6 26300 1375 0.076 24800 1150 0.059 21900 950 0.042
1.2 8 23670 1115 0.043 22320 930 0.034 19710 770 0.024
1.2 10 23670 1115 0.027 22320 930 0.021 19710 770 0.015
1.2 12 23670 1115 0.027 22320 930 0.021 19710 770 0.015
1.2 16 21040 880 0.016 19840 735 0.013 17520 610 0.009
1.2 20 15780 580 0.011 14880 485 0.008 13140 400 0.006
1.2 26 7890 245 0.011 7440 205 0.008 6570 170 0.006
1.4 6 21500 1295 0.088 20300 1100 0.069 18000 935 0.049
1.4 8 19350 1050 0.050 18270 890 0.039 16200 755 0.028
1.4 10 19350 1050 0.050 18270 890 0.039 16200 755 0.028
1.4 16 17200 830 0.032 16240 705 0.025 14400 600 0.018
1.5 4 23900 1580 0.135 22600 1355 0.105 20000 1075 0.075
1.5 5 23900 1580 0.095 22600 1355 0.074 20000 1075 0.053
1.5 6 23900 1580 0.095 22600 1355 0.074 20000 1075 0.053
1.5 7 23900 1580 0.095 22600 1355 0.074 20000 1075 0.053
1.5 8 21510 1280 0.054 20340 1100 0.042 18000 870 0.030
1.5 10 21510 1280 0.054 20340 1100 0.042 18000 870 0.03
1.5 12 21510 1280 0.054 20340 1100 0.042 18000 870 0.030
1.5 14 21510 1280 0.034 20340 1100 0.026 18000 870 0.019
1.5 16 19120 1010 0.034 18080 865 0.026 16000 690 0.019
1.5 18 19120 1010 0.034 18080 865 0.026 16000 690 0.019
1.5 20 19120 1010 0.020 18080 865 0.016 16000 690 0.011
1.5 22 19120 1010 0.020 18080 865 0.016 16000 690 0.011
1.5 26 14340 665 0.014 13560 570 0.011 12000 450 0.008
1.5 30 14340 665 0.014 13560 570 0.011 12000 450 0.008
1.5 35 7170 285 0.010 6780 245 0.008 6000 195 0.005
1.5 40 7170 285 0.010 6780 245 0.008 6000 195 0.005
1.6 4 22200 1555 0.101 21000 1300 0.078 18500 1110 0.056
1.6 6 22200 1555 0.101 21000 1300 0.078 18500 1110 0.056
1.6 8 22200 1555 0.101 21000 1300 0.078 18500 1110 0.056
1.6 10 19980 1260 0.058 18900 1055 0.045 16650 900 0.032
1.6 12 19980 1260 0.058 18900 1055 0.045 16650 900 0.032
1.6 16 19980 1260 0.036 18900 1055 0.028 16650 900 0.020
1.6 20 17760 995 0.036 16800 830 0.028 14800 710 0.020
1.8 4 22200 1780 0.113 21000 1470 0.088 18500 1225 0.063
1.8 6 22200 1780 0.113 21000 1470 0.088 18500 1225 0.063
1.8 8 22200 1780 0.113 21000 1470 0.088 18500 1225 0.063
1.8 10 19980 1440 0.065 18900 1190 0.050 16650 990 0.036
1.8 12 19980 1440 0.065 18900 1190 0.050 16650 990 0.036
492 KORLOY

1.8 16 19980 1440 0.041 18900 1190 0.032 16650 990 0.023
1.8 20 17760 1140 0.041 16800 940 0.032 14800 785 0.023
2.0 6 18000 1795 0.18 17000 1525 0.140 15000 1285 0.100
2.0 8 18000 1795 0.126 17000 1525 0.098 15000 1285 0.070
2.0 10 18000 1795 0.126 17000 1525 0.098 15000 1285 0.070
2.0 12 16200 1455 0.072 15300 1235 0.056 13500 1040 0.040
2.0 14 16200 1455 0.072 15300 1235 0.056 13500 1040 0.040
2.0 16 16200 1455 0.072 15300 1235 0.056 13500 1040 0.040
2.0 18 16200 1455 0.045 15300 1235 0.035 13500 1040 0.025
2.0 20 16200 1455 0.045 15300 1235 0.035 13500 1040 0.025
2.0 22 14400 1150 0.045 13600 975 0.035 12000 820 0.025
2.0 26 14400 1150 0.045 13600 975 0.035 12000 820 0.025
2.0 30 14400 1150 0.027 13600 975 0.021 12000 820 0.015
2.0 35 10800 755 0.018 10200 640 0.014 9000 540 0.010
2.0 40 10800 755 0.018 10200 640 0.014 9000 540 0.010
2.0 45 5400 325 0.018 5100 275 0.014 4500 230 0.010
2.0 50 5400 325 0.018 5100 275 0.014 4500 230 0.010
2.0 60 5400 325 0.018 5100 275 0.014 4500 230 0.010
2.5 8 15800 1925 0.158 14900 1605 0.123 13200 1305 0.088
2.5 10 15800 1925 0.158 14900 1605 0.123 13200 1305 0.088
2.5 12 15800 1925 0.158 14900 1605 0.123 13200 1305 0.088
2.5 16 14220 1560 0.090 13410 1300 0.070 11880 1055 0.050
2.5 20 14220 1560 0.090 13410 1300 0.070 11880 1055 0.050
2.5 22 14220 1560 0.056 13410 1300 0.044 11880 1055 0.031
2.5 26 12640 1230 0.056 11920 1025 0.044 10560 835 0.031
2.5 30 12640 1230 0.056 11920 1025 0.044 10560 835 0.031
2.5 35 12640 1230 0.034 11920 1025 0.026 10560 835 0.019
2.5 40 9480 810 0.034 8940 675 0.026 7920 550 0.019
2.5 45 9480 810 0.023 8940 675 0.018 7920 550 0.013
2.5 50 9480 810 0.023 8940 675 0.018 7920 550 0.013
3.0 6 13700 2050 0.270 12900 1730 0.21 11400 1435 0.150
3.0 8 13700 2050 0.270 12900 1730 0.21 11400 1435 0.150
3.0 10 13700 2050 0.189 12900 1730 0.147 11400 1435 0.105
3.0 12 13700 2050 0.189 12900 1730 0.147 11400 1435 0.105
3.0 14 13700 2050 0.189 12900 1730 0.147 11400 1435 0.105
3.0 16 12330 1660 0.108 11610 1400 0.084 10260 1160 0.060
3.0 18 12330 1660 0.108 11610 1400 0.084 10260 1160 0.060
3.0 20 12330 1660 0.108 11610 1400 0.084 10260 1160 0.060
3.0 22 12330 1660 0.108 11610 1400 0.084 10260 1160 0.060
3.0 26 12330 1660 0.068 11610 1400 0.053 10260 1160 0.038
3.0 30 12330 1660 0.068 11610 1400 0.053 10260 1160 0.038
3.0 35 10960 1310 0.068 10320 1105 0.053 9120 920 0.038
3.0 40 10960 1310 0.041 10320 1105 0.032 9120 920 0.023
KORLOY 493
U-Star Endmill
3.0 45 10960 1310 0.041 10320 1105 0.032 9120 920 0.023
3.0 50 8220 860 0.027 7740 725 0.021 6840 605 0.015
3.0 60 8220 860 0.027 7740 725 0.021 6840 605 0.015
4.0 8 9800 1965 0.360 9300 1670 0.28 8200 1395 0.200
4.0 10 9800 1965 0.360 9300 1670 0.28 8200 1395 0.200
4.0 12 9800 1965 0.360 9300 1670 0.28 8200 1395 0.200
4.0 14 9800 1965 0.252 9300 1670 0.196 8200 1395 0.140
4.0 16 9800 1965 0.252 9300 1670 0.196 8200 1395 0.140
4.0 18 9800 1965 0.252 9300 1670 0.196 8200 1395 0.140
4.0 20 9800 1965 0.252 9300 1670 0.196 8200 1395 0.140
4.0 22 8820 1590 0.144 8370 1355 0.112 7380 1130 0.080
4.0 26 8820 1590 0.144 8370 1355 0.112 7380 1130 0.080
4.0 30 8820 1590 0.144 8370 1355 0.112 7380 1130 0.080
4.0 35 8820 1590 0.090 8370 1355 0.07 7380 1130 0.050
4.0 40 8820 1590 0.090 8370 1355 0.07 7380 1130 0.050
4.0 45 7840 1260 0.090 7440 1070 0.07 6560 895 0.050
4.0 50 7840 1260 0.090 7440 1070 0.07 6560 895 0.050
4.0 60 7840 1260 0.054 7440 1070 0.042 6560 895 0.030
5.0 15 7700 1845 0.315 7300 1455 0.245 6400 1285 0.175
5.0 20 7700 1845 0.315 7300 1455 0.245 6400 1285 0.175
5.0 26 6930 1495 0.180 6570 1180 0.14 5760 1040 0.100
5.0 30 6930 1495 0.180 6570 1180 0.14 5760 1040 0.100
5.0 35 6930 1495 0.180 6570 1180 0.14 5760 1040 0.100
5.0 40 6930 1495 0.180 6570 1180 0.14 5760 1040 0.100
5.0 50 6930 1495 0.113 6570 1180 0.088 5760 1040 0.063
5.0 60 6160 1180 0.113 5840 930 0.088 5120 820 0.063
6.0 20 6500 1900 0.378 6200 1600 0.294 5500 1330 0.210
6.0 30 6500 1900 0.378 6200 1600 0.294 5500 1330 0.210
8.0 25 4850 1800 0.504 4600 1500 0.392 4000 1280 0.280
8.0 30 4850 1800 0.504 4600 1500 0.392 4000 1280 0.280
10.0 30 3850 1650 0.900 3680 1400 0.7 3200 1200 0.500
10.0 40 3850 1650 0.630 3680 1400 0.49 3200 1200 0.350
12.0 32 3200 1520 1.080 3050 1300 0.84 2650 1100 0.600
12.0 45 3200 1520 0.756 3050 1300 0.588 2650 1100 0.420
Application tip
ae ae
ap ap
ap: D1~D6 = 0.2mm ae: 0.2 × D ap: D1~D4 = 0.05 × D ae: 0.1 × D
D8~D12 = 0.3mm D5~D8 = 0.25mm
D10~D12 = 0.3mm
494 KORLOY
UB532 series

3.0 35,000 2,800 33,000 2,600 12,000 900

4.0 26,000 2,300 25,000 2,200 9,000 800
5.0 21,000 2,100 20,000 2,000 7,000 700
6.0 17,000 1,900 16,000 1,800 6,000 650
8.0 13,000 1,700 12,000 1,600 4,500 550
10.0 10,500 1,450 10,000 1,400 3,500 500
12.0 9,000 1,400 8,000 1,300 3,000 450
Application tip
ae : 0.05D
ap : 0.02D
UB542 series General processing


0.1 16,500 80 25,500 185 25,500 160

0.2 16,500 90 25,500 220 25,500 200
0.3 15,300 112 24,000 260 24,000 220
0.4 15,300 112 24,000 260 24,000 220
0.5 13,300 128 20,800 300 20,800 250
0.6 11,200 144 17,600 330 17,600 280
0.8 11,200 144 17,600 330 17,600 280
1.0 10,180 160 16,000 370 16,000 320
1.5 9,500 220 13,000 500 12,800 400
2.0 9,250 260 11,500 640 11,300 590
3.0 8,000 370 10,200 880 9,800 850
4.0 6,720 420 8,500 880 8,200 850
5.0 5,840 460 7,500 880 7,200 850
6.0 5,500 660 6,900 920 6,500 880
8.0 4,600 740 5,600 840 5,300 800
10 4,070 820 4,850 800 4,650 770
12 3,700 890 4,350 800 4,150 770
Application tip
ae ae
ap ap
ap: D1~D6 = 0.2mm ae: 0.2 × D ap: D1~D4 = 0.05 × D ae: 0.1 × D
D8~D12 = 0.3mm D5~D8 = 0.25mm
D10~D12 = 0.3mm
KORLOY 495
U-Star Endmill
USB502 series

3.0 13,500 1,700 13,200 1,620 12,500 860

4.0 10,600 1,700 10,300 1,620 9,800 860
5.0 9,400 1,650 9,050 1,570 8,600 860
6.0 8,600 1,750 8,250 1,670 7,850 865
8.0 7,000 1,550 6,700 1,460 6,350 890
10.0 6,050 1,450 5,800 1,360 5,450 870
12.0 5,450 1,420 5,200 1,330 4,900 785
16.0 4,300 1,200 4,000 1,100 3,700 650
20.0 3,600 1,050 3,200 900 3,000 550
Application tip
ae : 0.05D
ap : 0.02D
UB503 series

1.0 50,000 4,150 44,000 3,000 33,000 2100

1.5 40,000 5,100 35,000 3,660 36,400 2600
2.0 33,000 5,890 29,000 4,150 21,700 3000
3.0 25,000 6,930 22,000 4,880 16,500 3490
4.0 21,670 6,930 18,120 4,880 13,400 3490
5.0 18,000 6,520 15,100 4,880 11,160 3320
6.0 16,200 7,710 13,680 5,590 10,980 4050
8.0 12,150 6,610 10,170 4,720 8,280 3580
10.0 9,720 5,870 8,190 4,130 6,620 3100
12.0 8,150 5,490 4,130 3,830 5,520 2870
Application tip
ae : 0.05D
ap : 0.02D
496 KORLOY
UB504 series

1.0 48,000 3,300 35,000 2,350 32,000 2,200

1.5 38,400 4,100 28,000 2,900 25,600 2,700
2.0 31,680 4,600 23,100 3,300 21,000 3,100
3.0 24,000 5,430 17,500 3,880 16,000 3,650
4.0 20,130 5,430 14,880 3,880 14,220 3,650
5.0 16,780 5,430 12,400 3,690 11,670 3,470
6.0 15,200 6,220 12,200 4,500 11,100 3,830
8.0 11,300 5,250 9,200 3,980 8,320 3,350
10.0 9,100 4,590 7,350 3,450 6,660 2,870
12.0 7,590 4,260 6,130 3,190 5,530 2,400
Application tip
ae : 0.05D
ap : 0.02D
UTE502 series

0.4 36,000 144 27,900 113

0.6 25,200 144 18,900 113
0.8 18,000 144 13,950 108
1.0 14,850 149 11,250 113
2.0 7,560 153 5,670 113
3.0 3,969 108 3,213 90
4.0 3,213 126 2,556 104
Application tip
ap : 2.5D
5D
ae : 0.0
KORLOY 497
U-Star Endmill
UF50 series
Non ferrous 3teel, Alloy steel,
Workpiece Stainless Steel Heat treatment steel
Alloy steel, Cast iron Heat resisting steel
Strength ~HRC30 HRC30~38 HRC38~45 HRC45~55 HRC55~65
Conditions ~ 1000N/mm2 1000 ~ 1200N/mm2 1200 ~ 1400N/mm2 1400 ~ 2000N/mm2 2000N/mm2 ~
6.0 15,600 2,320 12,400 840 8,400 570 3,400 260 2,400 190
8.0 11,600 2,320 9,200 840 6,300 570 2,400 240 1,800 180
10.0 9,200 2,320 7,600 840 5,100 570 2,000 290 1,300 190
12.0 8,000 2,400 6,000 800 4,200 570 1,680 260 1,200 190
14.0 6,800 2,400 5,200 840 3,600 570 1,400 200 900 130
16.0 6,000 2,400 4,800 760 3,300 510 1,200 160 800 110
18.0 5,200 2,320 4,400 720 2,700 420 1,100 150 700 100
20.0 4,800 2,160 3,600 560 2,400 360 1,000 150 660 100
25.0 4,300 2,150 3,200 620 2,160 410 900 160 600 100
Application tip
ap : 1.5D ap : 1.0D
ae : 0.3D ae : 0.05D
UF51 series

6.0 12,400 840 8,400 570 3,400 260

8.0 9,200 840 6,300 570 2,400 240
10.0 7,600 840 5,100 570 2,000 290
12.0 6,000 800 4,200 570 1,680 260
14.0 5,200 840 3,600 570 1,400 200
16.0 4,800 760 3,300 510 1,200 160
18.0 4,400 720 2,700 420 1,100 150
20.0 3,600 560 2,400 360 1,000 150
25.0 3,200 620 2,160 410 900 160
Application tip
ap : 1.5D ap : 1.0D
ae : 0.3D ae : 0.05D
498 KORLOY
UF51---H series
Alloy steels Alloy steels
Alloy steels Alloy steels
Carbon steels Carbon steels
Workpiece Carbon steels Carbon steels
(SCM, S45C, S50C) Pre-hardened steels (SCM, S45C, S50C) Pre-hardened steels
(SCM, SKD, NAK, KP4) (SCM, SKD, NAK, KP4)
Conditions ~HRC25 HRC25~40 ~HRC25 HRC25~40
6.0 12,000 1,550 10,600 1,100 15,800 2,570 14,300 1,850

8.0 9,000 1,650 8,100 1,180 11,900 2,700 10,700 1,950
10.0 7,200 1,650 6,400 1,180 9,500 2,700 8,500 1,950
12.0 6,000 1,540 5,400 1,140 8,000 2,570 7,100 1,850
16.0 4,500 1,500 4,100 1,050 6,000 2,450 5,400 1,750
20.0 3,600 1,330 3,200 900 4,800 2,140 4,300 1,500
Application tip
ap : 1.0D ap : 0.8D ap : 1.0D ap : 1.0D
ae : 0.5D ae : 0.35D
KORLOY 499
G-Star Endmill
DB312, DB342, DB402, DB502, DB512, DB522, DB54(5)2 General Cutting
N0N-alloyed steels
Workpiece Alloy steels, Heat resistant steels Hardened steels
alloy steels · Cast iron
Conditions ~ 1100N/mm2 1000 ~ 1250N/mm2 1500N/mm2

1.0 16,500 290 13,300 230 6,100 105

1.5 16,500 405 12,700 310 5,590 140
2.0 15,100 865 11,200 565 4,900 175
2.5 15,100 865 11,200 565 4,900 175
3.0 13,800 780 10,500 530 4,750 175
4.0 11,000 850 8,800 610 4,410 205
5.0 9,600 945 7,600 665 3,860 205
6.0 8,900 1,150 7,200 955 3,340 220
8.0 7,500 1,500 6,050 1,060 2,590 255
10.0 6,700 1,750 5,300 1,170 2,140 260
12.0 6,150 2,000 4,900 1,280 1,840 280
16.0 5,000 1,950 3,900 1,220 1,420 280
20.0 4,350 1,900 3,400 1,200 1,170 290
Application tip
ae ae: D1~D6 = 0.2mm ae: D1~D6 = 0.2mm
D8~D20 = 0.3mm D8~D20 = 0.25mm
ap ap: 0.2 × D ap: 0.1 × D
※ Please reduce cutting speed around 20~30% from the above table or DB522 series.
DB312, DB342, DB402, DB502, DB512, DB522, DB54(5)2 High Speed Cutting
N0N-alloyed steels
Workpiece Alloy steels, Heat resistant steels
alloy steels · Cast iron

1.0 26,000 1,500 26,000 920

1.5 24,000 1,600 24,000 990
2.0 22,000 1,700 22,000 1,080
2.5 22,000 2,000 20,000 1,130
3.0 22,000 2,300 17,800 1,200
4.0 22,000 3,350 14,300 1,300
5.0 22,000 4,150 12,600 1,380
6.0 22,000 4,600 11,000 1,440
8.0 17,500 4,600 8,800 1,440
10.0 14,700 4,450 7,350 1,380
12.0 12,800 4,450 6,400 1,330
16.0 10,000 4,000 5,000 1,150
20.0 8,350 3,650 4,150 1,060
Application tip
ae ae: D1~D6 = 0.2mm
D8~D20 = 0.3mm
ap ap: 0.2 × D
※ Please reduce cutting speed around 20~30% from the above table or DB522 series.
500 KORLOY
ZR324, ZR504, ZR514, ZR524

Non-Alloyed steels
Alloy steels, Heat resistant steels hardened steels
Alloy steels · Cast iron

3 6,950 195 4,500 150 3,300 100

4 5,600 240 3,600 170 2,700 105
5 4,800 250 3,050 210 2,350 125
6 4,150 250 2,650 210 2,050 125
8 3,150 265 2,000 210 1,600 125
10 2,150 265 1,700 210 1,250 125
12 1,800 210 1,500 185 1,050 105
16 1,880 185 1,100 140 840 90
20 1,300 130 860 105 625 65
Application tip
2.0D 2.0D
0.05D 0.02D
TX202, TX222, TX302

Non-Alloy steels, Alloy steels, Heat Copper, Brass
Workpiece Stainless steels Cast iron Aluminum alloys
alloy steels, Cast iron resistant steels Non-ferrous metals
Strength ~HRC30 HRC30~45 - - - -
Conditions ~1000N/mm2 1000~1500N/mm2 - - - -
1.0 14,300 105 8,500 65 7,150 50 18,700 205 44,000 330 24,700 200
1.5 9,350 150 5,550 85 5,600 80 12,100 205 27,500 385 20,300 300
2.0 7,850 160 5,150 100 4,300 80 9,350 220 22,000 460 16,500 340
3.0 6,100 180 3,800 120 3,150 100 6,050 220 15,400 460 11,000 340
4.0 5,150 255 3,150 155 2,650 130 4,600 220 11,000 460 8,800 340
5.0 4,300 270 2,550 160 2,150 135 3,650 220 9,150 460 6,800 340
6.0 3,800 300 2,300 190 1,950 155 2,950 255 7,600 485 5,700 375
8.0 2,850 325 1,700 170 1,450 155 2,200 275 5,700 485 4,400 375
10.0 2,200 280 1,350 135 1,150 135 1,850 285 4,600 485 3,400 375
12.0 1,850 240 1,150 110 950 110 1,450 295 3,750 485 2,850 375
14.0 1,700 215 1,050 100 850 100 1,300 310 3,300 485 2,400 375
16.0 1,500 185 950 95 700 95 1,100 320 2,850 485 2,200 375
20.0 1,150 145 700 70 550 70 900 340 2,200 485 1,700 375
Application tip
1.0D
0.5D
(UP to Ø3 : 0.2D)
1.0D 1.0D
※ The Feed for long & extra long types, should be reduced by around 30~40%.
KORLOY
Y 501
G-Star Endmill
TX204, TX224, TX304
Strength ~HRC30 HRC30~45 - - - -
1.0 17,600 150 10,250 85 8,650 75 18,700 620 44,000 1,050 24,700 605
1.5 11,800 215 7,050 115 7,050 120 12,100 620 27500 1,160 20,300 910
2.0 9,850 240 6,450 145 5,350 120 9,350 640 22000 1,320 16,500 1,035
3.0 7,600 270 4,750 170 3,950 145 6,050 640 15400 1,320 11,000 1,035
4.0 6,450 485 3,950 300 3,300 240 4,600 640 11000 1,320 8,800 1,035
5.0 5,350 510 3,200 305 2,700 255 3,650 640 9150 1,320 6,800 1,035
6.0 4,750 560 2,850 350 2,400 280 2,950 770 7600 1,430 5,700 1,100
8.0 3,550 605 2,150 325 1,800 300 2,200 815 5700 1,430 4,400 1,100
10.0 2,750 520 1,700 255 1,450 255 1,850 860 4600 1,430 3,400 1,100
12.0 2,350 440 1,450 215 1,150 205 1,450 900 3750 1,430 2,850 1,100
14.0 2,100 395 1,300 195 1,050 190 1,300 945 3300 1,430 2,400 1,100
16.0 1,850 350 1,150 170 950 170 1,100 970 2850 1,430 2,200 1,100
20.0 1,450 270 900 135 700 130 900 1,035 2200 1,430 1,700 1,100
Application tip
1.0D 1.5D
0.1D 0.1D
502 KORLOY
TX304H
Strength ≤ HRC30 HRC30~45 - - - -
1.0 17,600 150 10,250 85 8,650 75 18,700 620 44,000 1,050 24,700 605
1.5 11,800 215 7,050 115 7,050 120 12,100 620 27,500 1,160 20,300 910
2.0 9,850 240 6,450 145 5,350 120 9,350 640 22,000 1,320 16,500 1,035
3.0 7,600 270 4,750 170 3,950 145 6,050 640 15,400 1,320 11,000 1,035
4.0 6,450 485 3,950 300 3,300 240 4,600 640 11,000 1,320 8,800 1,035
5.0 5,350 510 3,200 305 2,700 255 3,650 640 9,150 1,320 6,800 1,035
6.0 4,750 560 2,850 350 2,400 280 2,950 770 7,600 1,430 5,700 1,100
8.0 3,550 605 2,150 325 1,800 300 2,200 815 5,700 1,430 4,400 1,100
10.0 2,750 520 1,700 255 1,450 255 1,850 860 4,600 1,430 3,400 1,100
12.0 2,350 440 1,450 215 1,150 205 1,450 900 3,750 1,430 2,850 1,100
14.0 2,100 395 1,300 195 1,080 190 1,300 945 3,300 1,430 2,400 1,100
16.0 1,850 350 1,150 170 950 170 1,100 970 2,850 1,430 2,200 1,100
20.0 1,450 270 900 135 700 130 900 1,035 2,200 1,430 1,700 1,100
Application tip
1.0D 1.5D
0.1D 0.1D
TXB202, TXB222, TXB232, TXB302

Workpiece Carbon steels, Alloy steels, Tool steels Hardened steels Cast iron Aluminum alloys
Strength ≤ HRC30 HRC30~45 HRC45~50 - -

Conditions ~1000N/mm2 1000~1500N/mm2 1500N/mm2 - -
2.0 12,350 640 9,150 415 4,000 125 10,500 220 30,800 395
3.0 11,400 575 8,550 390 3,800 125 7,050 230 20,500 395
4.0 8,950 630 7,150 450 3,600 150 5,150 285 15,400 395
5.0 7,800 700 6,200 490 3,100 150 4,150 330 12,100 470
6.0 7,250 870 5,900 705 2,700 160 3,400 360 10,300 470
8.0 6,100 1,090 4,900 785 2,050 190 2,500 460 7,900 540
10.0 5,450 1,330 4,350 870 1,750 190 2,050 460 6,150 540
12.0 4,990 1,500 3,950 950 1,500 210 1,750 460 5,150 630
14.0 4,530 1,495 3,600 925 1,300 210 1,400 460 4,300 630
16.0 4,085 1,470 3,200 905 1,150 210 1,300 460 3,850 540
18.0 3,800 1,425 3,000 890 1,050 210 1,100 460 3,400 540
20.0 3,550 1,425 2,800 885 950 210 1,050 420 2,950 540
Application tip
ae: D1~D6 = 0.2mm ap 0.3D

D8~D20 = 0.3mm
ap: 0.2
ae 0.7D
KORLOY 503
G-Star Endmill
TXB304, TXB204 series
Workpiece Alloy steels, Tool steels Hardened steels Cast iron Aluminum alloys
Strength ≤ HRC30 HRC30~45 HRC45~50 - -

Conditions ~1000N/mm2 1000~1500N/mm2 1500N/mm2 - -
2 15,400 1,000 11,400 600 5,000 200 13,100 300 38,500 600
3 14,300 900 10,700 600 4,800 200 8,800 300 25,600 600
4 11,200 900 8,900 700 4,500 200 6,400 400 19,300 600
5 9,800 1,100 7,800 700 3,900 200 5,200 500 15,100 700
6 9,100 1,300 7,400 1,100 3,400 200 4,300 500 12,900 700
8 7,600 1,600 6,100 1,200 2,600 300 3,100 700 9,900 800
10 6,800 2,000 5,400 1,300 2,200 300 2,600 700 7,700 800
12 6,200 2,300 4,900 1,400 1,900 300 2,200 700 6,400 900
14 5,700 2,200 4,500 1,400 1,600 300 1,800 700 5,400 900
16 5,100 2,200 4,000 1,400 1,400 300 1,600 700 4,800 800
18 4,800 2,100 3,800 1,300 1,300 300 1,400 700 4,300 800
20 4,400 2,100 3,500 1,300 1,200 300 1,300 600 3,700 800
ZR304H, ZR324H
Non-Alloyed steels
Workpiece Alloy steels, Heat resistant steels hardened steels
2 2
Conditions ~1000N/mm 1000~1500N/mm 1500~2000N/mm2

6 7,000 910 4,200 560 3,000 140

8 5,300 980 3,200 530 2,500 190
10 4,100 840 2,500 410 2,050 165
12 3,500 730 2,100 340 1,700 140
Application tip
1.0D
0.05D
504 KORLOY
ZE302, ZE322, ZE402, ZE502, ZE522, ZE512 General Cutting
Workpiece Alloy steels, Heat resistant steels Hardened steels Stainless steels
Strength HRC30~40 HRC40~50 -

Conditions 1000~1250N/mm2 1250~1750N/mm2 -

2 9,700 220 6,350 135 5,300 105

3 7,500 240 4,670 160 3,880 135
4 6,350 345 3,880 205 3,250 175
5 5,300 370 3,170 220 2,650 185
6 4,670 405 2,830 255 2,380 205
8 3,530 435 2,120 230 1,760 205
10 2,730 380 1,680 185 1,420 185
12 2,310 320 1,420 150 1,140 150
16 1,850 255 1,140 125 890 125
20 1,420 195 890 90 705 90
25 1,150 150 705 80 580 70
Application tip
1.0D 1.0D
0.5D 0.05D
(UP to Ø3 : 0.2D)
※ Please reduce cutting speed around 20~30% from the above table or ZE522, ZE322 series.
ZE302, ZE322, ZE402, ZE502, ZE522, ZE512 High Speed Cutting
Workpiece Alloy steels, Heat resistant steels Hardened steels stainless steels
Strength HRC30~40 HRC40~50 HRC40~55 -

2 2 2
Conditions 1000~1250N/mm 1250~1750N/mm 1750~2000N/mm -
2 18,000 665 11,800 415 8,700 175 9,800 345

3 11,000 655 6,800 435 5,600 185 6,200 370
4 10,300 725 6,300 430 4,300 185 5,300 370
5 9,350 715 5,570 420 3,700 185 4,620 355
6 8,200 750 4,930 470 3,250 185 4,100 390
8 6,300 770 3,780 410 2,470 185 3,120 355
10 4,830 750 2,940 360 2,000 160 2,470 310
12 4,100 750 2,520 345 1,680 160 2,100 300
16 3,260 715 2,000 355 1,890 150 1,940 290
20 2,520 665 1,580 310 1,680 150 1,630 275
25 2,000 635 1,260 340 1,570 150 1,420 290
Application tip
1.0D 1.0D
0.5D 0.05D
(UP to Ø3 : 0.2D)
KORLOY 505
G-Star Endmill
ZE304, ZE324, ZE404, ZE504, ZE524, ZE534, ZE514, ACE4 General Cutting
Non-Alloyed steels
Workpiece Hardened steels Stainless steels
Strength ~HRC30 HRC30~45 HRC45~55 -
Conditions ~1000N/mm2 1000~1500N/mm2 1500~2000N/mm2 -
2 12,100 320 7,900 195 2,700 47 6,600 160

3 9,400 370 5,840 230 2,000 58 4,850 195
4 7,900 655 4,850 405 1,500 58 4,070 320
5 6,600 690 3,970 415 1,300 58 3,320 345
6 5,830 760 3,530 470 1,150 58 2,980 380
8 4,410 815 2,650 435 880 58 2,200 405
10 3,420 700 2,100 345 720 46 1,760 345
12 2,880 600 1,760 290 590 46 1,430 275
16 2,310 470 1,430 230 460 29 1,150 230
20 1,760 370 1,110 185 340 29 880 175
25 1,430 290 880 150 270 23 715 140
Application tip
1.0D 1.0D
0.1D 0.02D
※ Please reduce cutting speed around 20~30% from the above table or ZE524 & ZE324 series.
ZE304, ZE324, ZE404, ZE504, ZE524, ZE534, ZE514, ACE4 High Speed Cutting
Non-Alloyed steels
Workpiece Hardened steels Stainless steels
Strength ~HRC30 HRC30~45 HRC45~55 -
Conditions ~1000N/mm2 1000~1500N/mm2 1500~2000N/mm2 -
2 31,400 1,230 23,500 520 12,600 275 21,600 465

3 19,300 1,210 13,600 735 8,900 390 13,500 660
4 18,100 1,330 12,600 865 7,090 465 11,800 775
5 16,400 1,310 11,100 1,010 6,040 530 10,300 910
6 14,400 1,380 9,900 1,100 5,300 580 9,100 990
8 11,000 1,430 7,600 1,090 3,990 575 6,900 980
10 8,500 1,380 5,880 1,110 3,150 580 5,420 1,000
12 7,200 1,380 5,040 1,090 2,620 575 4,600 985
16 5,700 1,320 3,990 1,010 2,000 535 3,590 910
20 4,400 1,270 3,150 930 1,580 490 2,840 840
25 3,500 1,170 2,520 755 1,260 390 2,270 680
Application tip
1.0D
0.02D
506 KORLOY
ZR322, ZR502, ZR512, ZR522 Side cutting

Non-Alloyed steels

3 6,950 195 4,500 150 3,300 100

4 5,600 240 3,600 170 2,700 105
5 4,800 250 3,050 210 2,350 125
6 4,150 250 2,650 210 2,050 125
8 3,150 265 2,000 210 1,600 125
10 2,150 265 1,700 210 1,250 125
12 1,800 210 1,500 185 1,050 105
16 1,800 185 1,100 140 840 90
20 1,300 130 860 105 625 65
Application tip
2.0D 2.0D
0.05D 0.02D
ZR322, ZR502, ZR512, ZR522 Slotting

Non-Alloyed steels

3 6,950 160 4,500 80 3,300 55

4 5,600 195 3,600 100 2,700 60
5 4,800 240 3,050 115 2,350 75
6 4,150 290 2,650 145 2,050 90
8 3,150 210 2,000 145 1,600 90
10 2,150 250 1,700 140 1,250 90
12 1,800 200 1,500 135 1,050 75
16 1,800 215 1,100 100 840 60
20 1,300 160 860 70 625 45
Application tip
1.0D
0.5D
KORLOY 507
R+ Endmill
RPAE * For Carbide
Workpiece Aluminum, Non-ferrous metal Aluminum, Non-ferrous metal

Conditions
6.0 13,000 1,125 13,000 1,400

8.0 10,400 1,300 10,400 1,600
10.0 10,400 1,585 10,400 2,000
12.0 10,400 1,950 10,400 1,650
14.0 7,800 1,675 7,800 2,050
16.0 7,800 1,755 7,800 2,250
18.0 5,200 1,300 5,200 1,700
20.0 5,200 1,495 5,200 1,800
25.0 5,000 1,495 5,000 1,800
Application tip
■Shouldering depth(ap) ■Slotting depth(ap)
•ap : ≤ 1.5D •ap : ≤ 0.2D
•ae : ≤ 0.15D
※ Workpiece should be clamped rigidly. In case of vibrations, reduce RPM and feed rate by the same ratio
RP(L)E-FP-H * For Carbide

Alloy steels, Carbon steels, Alloy steels, Carbon steels,
Workpiece Alloy steels, Carbon steels Alloy steels, Carbon steels
Pre-hardened steels Pre-hardened steels
≤HRC25 ≤HRC25
HRC25~40 HRC25~40
Conditions
R.P.M Feed R.P.M Feed R.P.M Feed R.P.M Feed
Diameter (Ø) n (min -1) vf (mm/min) n (min -1) vf (mm/min) n (min -1) vf (mm/min) n (min -1) vf (mm/min)
6.0 12,000 1,550 10,600 1,100 15,800 2,570 14,300 1,850

8.0 9,000 1,650 8,100 1,180 11,900 2,700 10,700 1,950
10.0 7,200 1,650 6,400 1,180 9,500 2,700 8,500 1,950
12.0 6,000 1,540 5,400 1,140 8,000 2,570 7,100 1,850
14.0 5,200 1,540 4,750 1,095 7,000 2,510 6,250 1,800
16.0 4,500 1,540 4,100 1,050 6,000 2,450 5,400 1,750
18.0 4,400 1,435 3,650 975 5,400 2,295 4,850 1,625
20.0 3,600 1,330 3,200 900 4,800 2,140 4,300 1,500
25.0 3,200 1,200 2,800 850 4,400 2,000 3,800 1,400
Application tip
•ap : ≤ 1.0D •ap : ≤ 1.0D (≤HRC25)
•ae : ≤ 0.5D (≤HRC25) ≤ 0.8D (HRC25~40)
≤ 0.35D (HRC25~40)
508 KORLOY
RPE-XG * For Carbide

≤HRC25 ≤HRC25
HRC25~40 HRC25~40
Conditions
6.0 12,000 1,090 10,600 770 15,800 1,800 14,300 1,300

8.0 9,000 1,160 8,100 830 11,900 1,890 10,700 1,370
10.0 7,200 1,160 6,400 830 9,500 1,890 8,500 1,370
12.0 6,000 1,080 5,400 800 8,000 1,800 7,100 1,300
14.0 5,200 1,080 4,750 770 7,000 1,760 6,250 1,260
16.0 4,500 1,080 4,100 740 6,000 1,720 5,400 1,230
18.0 4,400 1,000 3,650 680 5,400 1,610 4,850 1,140
20.0 3,600 930 3,200 630 4,800 1,500 4,300 1,050
25.0 3,200 840 2,800 600 4,400 1,400 3,800 980
Application tip
•ap : ≤ 1.0D •ap : ≤ 1.0D (≤HRC25)
•ae : ≤ 0.5D (≤HRC25) ≤ 0.8D (HRC25~40)
≤ 0.35D (HRC25~40)
RPE-FP-L * For Carbide
Workpiece Alloy steel, Carbon steels Pre-hardened steels High hardened steels
≤HRC35 HRC35~45 HRC45~55
Conditions
R.P.M Feed R.P.M Feed R.P.M Feed
Diameter (Ø) n (min -1) vf (mm/min) n (min -1) vf (mm/min) n (min -1) vf (mm/min)
6.0 12,400 840 8,400 570 3,400 260

8.0 9,200 840 6,300 570 2,400 240
10.0 7,600 840 5,100 570 2,000 290
12.0 6,000 840 4,200 570 1,680 260
14.0 5,200 840 3,600 570 1,400 200
16.0 4,800 760 3,300 510 1,200 160
18.0 4,400 720 2,700 420 1,100 150
20.0 3,600 560 2,400 360 1,000 150
25.0 3,200 620 2,160 410 900 160
Application tip
•ap : ≤ 1.0D •ap : ≤ 0.3D (≤HRC45)
•ae : ≤ 0.3D (≤HRC45) ≤ 0.05D (HRC45~55)
≤ 0.05D (HRC45~55)
KORLOY 509
R+ Endmill
RPE-RG * For Carbide
≤HRC25 ≤HRC25
HRC25~40 HRC25~40
Conditions
6.0 12,000 1,240 10,600 800 15,800 2,060 14,300 1,480

8.0 9,000 1,320 8,100 940 11,900 2,160 10,700 1,560
10.0 7,200 1,320 6,400 940 9,500 2,160 8,500 1,560
12.0 6,000 1,230 5,400 910 8,000 2,060 7,100 1,480
14.0 5,200 1,230 4,750 880 7,000 2,010 6,250 1,440
16.0 4,500 1,230 4,100 840 6,000 1,960 5,400 1,400
18.0 4,400 1,150 3,650 780 5,400 1,840 4,850 1,300
20.0 3,600 1,060 3,200 720 4,800 1,710 4,300 1,200
25.0 3,200 960 2,800 680 4,400 1,600 3,800 1,120
Application tip
•ap : ≤ 1.0D •ap : ≤ 1.0D (≤HRC25)
•ae : ≤ 0.5D (≤HRC25) ≤ 0.8D (HRC25~40)
≤ 0.35D (HRC25~40)
RPE-FF, FP, RG * For HSS PM

Alloy steels, Carbon steels, Alloy steels, Carbon steels, Alloy steels, Carbon steels,
Workpiece Alloy steels, Carbon steels,
Tool steels Tool steels Tool steels
Tool steels
≤HRC20 HRC20~30 HRC30~40
Conditions
6.0 2,700 200 2,100 155 1,500 100 1,250 90

8.0 2,300 250 1,800 200 1,300 140 1,000 110
10.0 1,800 360 1,400 275 1,000 170 850 140
12.0 1,500 360 1,150 290 850 200 700 155
14.0 1,300 360 1,000 290 720 200 600 155
16.0 1,150 360 900 290 625 200 520 155
18.0 1,000 360 850 290 580 200 470 155
20.0 920 370 720 290 500 200 420 155
22.0 850 370 620 290 450 200 380 155
25.0 750 360 570 275 400 190 340 155
Application tip
•ap : ≤ 1.5D (All dia.) •ap : ≤ 0.15D
•ae : ≤ 0.5D (All dia.)
510 KORLOY
RPE-RG * For HSS Co

Alloy steels, Carbon steels, Alloy steels, Carbon steels, Alloy steels, Carbon steels,
Workpiece Alloy steels, Carbon steels,
Tool steels Tool steels Tool steels
Tool steels
≤HRC20 HRC20~30 HRC30~40
Conditions
6.0 1,800 80 1,600 60 1,200 55 800 30

8.0 1,400 105 1,100 75 900 65 560 45
10.0 1,100 150 900 120 800 110 450 60
12.0 900 180 800 140 630 110 400 70
14.0 800 180 700 140 560 110 350 70
16.0 700 180 560 140 450 110 280 70
18.0 630 180 500 140 400 110 250 70
20.0 560 180 450 140 400 110 220 70
22.0 500 220 450 170 350 140 220 70
25.0 450 220 400 170 310 140 180 85
28.0 400 210 350 160 280 130 160 85
30.0 350 210 310 160 250 130 160 85
32.0 350 210 280 160 220 130 140 85
36.0 310 210 250 160 200 130 120 85
40.0 280 200 220 150 180 120 110 80
50.0 220 200 180 170 160 140 90 80
Application tip
•ap : ≤ 1.5D •ap : ≤ 0.15D
•ae : ≤ 0.1D
KORLOY 511
S-Star Endmill
SE502 series Slotting
Workpiece Carbon steel, Alloy steel, Tool steel

Stainless steel 300 series
Conditions ~HRC30 HRC30~40
Diameter (Ø)
1.0 13000 220 9800 160 21000 170

1.2 12500 210 9000 150 17500 140
1.5 12000 200 8300 140 14000 110
2.0 11560 190 7560 120 10500 85
2.5 10240 200 6560 130 8500 70
3.0 8920 210 5560 140 8000 65
4.0 7560 300 4620 180 7500 75
5.0 6300 320 3780 190 6000 80
6.0 5560 350 3360 220 5000 80
8.0 4200 380 2520 200 3750 90
10.0 3260 330 2000 160 3000 90
12.0 2740 280 1680 130 2500 95
14.0 2470 250 1520 120 2150 100
16.0 2200 220 1360 110 1880 105
18.0 1940 195 1210 95 1670 110
20.0 1680 170 1060 80 1500 115
Application tip
ap : 0.5D ap : 0.2D
(ap : UP to Ø3.0 : 0.2D)
512 KORLOY
SE503 series Slotting
Workpiece Carbon steel, Alloy steel, Tool steel Stainless Copper

Cast iron Ti alloy Ti alloy
steel alloy
Conditions ~HRC20 HRC20~30 HRC30~45
Diameter (Ø) R.P.M Feed R.P.M Feed R.P.M Feed R.P.M Feed R.P.M Feed R.P.M Feed R.P.M Feed R.P.M Feed
n (min -1) vf (mm/min) n (min -1) vf (mm/min) n (min -1) vf (mm/min) n (min -1) vf (mm/min) n (min -1) vf (mm/min) n (min -1) vf (mm/min) n (min -1) vf (mm/min) n (min -1) vf (mm/min)
1.0 30000 1000 23000 800 16500 450 20000 500 16500 350 25000 360 16500 380 6500 100
1.5 20000 1000 15500 800 11000 450 13000 500 11000 350 16500 360 11000 380 4500 100
2.0 15000 1000 11500 800 8200 450 10000 500 8400 350 12500 360 8200 380 3500 100
2.5 12000 1000 9400 800 7500 450 8000 500 6500 350 10000 360 6500 380 2600 100
3.0 10080 950 7750 740 5550 395 6700 520 5550 350 8300 360 5550 395 2200 100
4.0 7550 1400 5850 1100 4200 595 5050 550 4200 320 6200 400 4200 595 1650 105
5.0 6000 1500 4700 1200 3300 650 4000 600 3300 350 5000 420 3300 600 1400 120
6.0 5050 1650 3850 1250 2800 700 3350 660 2800 370 4100 440 2800 700 1150 130
8.0 3750 1700 2950 1330 2100 710 2500 665 2100 375 3100 500 2100 710 850 120
10.0 3050 1650 2300 1250 1650 665 2000 630 1350 355 2500 530 1650 665 650 120
12.0 2500 1500 2000 1200 1350 605 1650 570 1350 320 2000 550 1350 605 555 110
14.0 2150 1550 1700 1200 1200 605 1450 580 1200 250 1700 600 1200 605 500 110
16.0 1850 1600 1450 1250 1000 650 1250 600 1000 200 1500 650 1000 610 400 115
18.0 1650 1650 1300 1300 920 700 1100 620 900 150 1300 700 900 615 350 120
20.0 1500 1700 1150 1350 840 750 1000 640 800 100 1200 750 800 620 320 125
Application tip
ap : 0.5D ap : 0.2D
SE503 series Side machining
Workpiece Carbon steel, Alloy steel, Tool steel Stainless Copper

Cast iron Ti alloy Ti alloy
steel alloy
Conditions ~HRC20 HRC20~30 HRC30~45
Diameter (Ø) R.P.M Feed R.P.M Feed R.P.M Feed R.P.M Feed R.P.M Feed R.P.M Feed R.P.M Feed R.P.M Feed
n (min -1) vf (mm/min) n (min -1) vf (mm/min) n (min -1) vf (mm/min) n (min -1) vf (mm/min) n (min -1) vf (mm/min) n (min -1) vf (mm/min) n (min -1) vf (mm/min) n (min -1) vf (mm/min)
1.0 30000 1000 23000 800 16500 450 20000 500 16500 350 25000 360 16500 380 6500 100
1.5 20000 1000 15500 800 11000 450 13000 500 11000 350 16500 360 11000 380 4500 100
2.0 15000 1000 11500 800 8200 450 10000 500 8400 350 12500 360 8200 380 3500 100
2.5 12000 1000 9400 800 7500 450 8000 500 6500 350 10000 360 6500 380 2600 100
3.0 10080 950 7750 740 5550 395 6700 520 5550 350 8300 360 5550 395 2200 100
4.0 7550 1400 5850 1100 4200 595 5050 550 4200 320 6200 400 4200 595 1650 105
5.0 6000 1500 4700 1200 3300 650 4000 600 3300 350 5000 420 3300 600 1400 120
6.0 5050 1650 3850 1250 2800 700 3350 660 2800 370 4100 440 2800 700 1150 130
8.0 3750 1700 2950 1330 2100 710 2500 665 2100 375 3100 500 2100 710 850 120
10.0 3050 1650 2300 1250 1650 665 2000 630 1350 355 2500 530 1650 665 650 120
12.0 2500 1500 2000 1200 1350 605 1650 570 1350 320 2000 550 1350 605 555 110
14.0 2150 1550 1700 1200 1200 605 1450 580 1200 250 1700 600 1200 605 500 110
16.0 1850 1600 1450 1250 1000 650 1250 600 1000 200 1500 650 1000 610 400 115
18.0 1650 1650 1300 1300 920 700 1100 620 900 150 1300 700 900 615 350 120
20.0 1500 1700 1150 1350 840 750 1000 640 800 100 1200 750 800 620 320 125
Application tip
ap : 1.5D ap : 1.5D
ae : 0.1D ae : 0.05D
KORLOY 513
S-Star Endmill
SE504 , SR504 series Slotting
Workpiece Alloy steel, Cast iron

Stainless steel 300 series Stainless steel 400 series Titanium Inconel
Conditions ~HB230
R.P.M Feed R.P.M Feed R.P.M Feed R.P.M Feed R.P.M Feed
Diameter (Ø)
1.0 40,500 300 20,000 250 28,000 160 23,925 225 9330 60
1.5 27,000 300 13,000 180 18,500 160 15,730 185 6135 50
2.0 20,300 300 10,000 150 14,000 160 12,010 165 4685 45
2.5 16,200 300 8,000 120 11,000 165 9,490 155 3700 40
3.0 13,500 275 6,690 105 9,350 145 8,045 135 3135 35
4.0 10,100 370 5,050 135 7,000 185 6,005 195 2340 50
5.0 8,090 410 4,050 165 5,600 230 4,815 360 1875 60
6.0 6,750 480 3,350 190 4,700 265 4,030 415 1570 70
8.0 5,050 620 2,500 250 3,500 340 3,000 545 1170 95
10.0 4,050 780 2,050 320 2,800 430 2,430 695 945 120
12.0 3,370 750 1,680 310 2,350 435 2,010 685 780 115
14.0 2,890 670 1,400 280 2,000 405 1,700 820 715 150
16.0 2,500 630 1,250 265 1,750 370 1,500 950 600 180
18.0 2,250 630 1,100 260 1,550 365 1,320 1,245 515 250
20.0 2,000 620 1,000 260 1,400 365 1,200 1,875 480 390
Application tip
ap : 1.0D ap : 0.2D
SE504 , SR504 series Side machining

Stainless steel 300 series Stainless steel 400 series Titanium Inconel
Conditions ~HB230
Diameter (Ø)
1.0 40,500 335 20,000 280 28,000 180 23,925 260 9570 65
1.5 27,000 335 13,000 200 18,500 180 15,730 215 6290 55
2.0 20,300 335 10,000 170 14,000 180 12,010 195 4805 50
2.5 16,200 335 8,000 135 11,000 185 9,490 180 3795 45
3.0 13,500 310 6,690 115 9,350 160 8,045 155 3215 40
4.0 10,100 415 5,050 150 7,000 205 6,000 335 2520 60
5.0 8,090 460 4,050 185 5,600 260 4,815 410 2020 75
6.0 6,750 540 3,350 215 4,700 295 4,030 470 1690 85
8.0 5,050 700 2,500 280 3,500 380 3,000 620 1260 110
10.0 4,050 880 2,050 360 2,800 485 2,430 790 1020 145
12.0 3,370 845 1,680 350 2,350 490 2,010 780 845 140
14.0 2,890 755 1,400 315 2,000 455 1,700 925 715 170
16.0 2,500 710 1,250 295 1,750 415 1,500 1075 600 205
18.0 2,250 710 1,100 290 1,550 410 1,320 1410 515 275
20.0 2,000 700 1,000 290 1,400 410 1,200 2120 480 430
Application tip
ap : 1.5D ap : 1.5D
ae : 0.1D ae : 0.05D
514 KORLOY
SE506 series Side machining - Normal speed

Stainless steel, Ti alloy Inconel
Conditions ~HRC30 HRC30~HRC40
Diameter (Ø)
6.0 5560 2000 3880 1370 3370 1100 1350 280

8.0 4200 2000 2940 1370 2490 1100 1000 280
10.0 3360 2000 2320 1370 1920 1100 440 280
12.0 2840 1680 2000 1160 1610 1000 400 250
16.0 2100 1260 1480 880 1160 770 310 190
20.0 1680 1010 1160 690 900 620 250 155
Application tip
ap : 1.5D ap : 1.5D ap : 1.0D
ae : 0.1D ae : 0.05D ae : 0.02D
SE506 series Side machining - High speed
Conditions ~HRC30 HRC30~HRC40

Diameter (Ø)
6.0 22200 8000 16800 6090

8.0 16800 8000 12600 6090
10.0 13400 8000 9988 5990
12.0 11350 6720 8400 5040
16.0 8400 5040 6300 3780
20.0 6700 4040 5040 3050
Application tip
ap : 1.5D ap : 1.5D
ae : 0.1D ae : 0.05D
KORLOY 515
S-Star Endmill
SR505, SR507 series Side machining

Stainless steel, Titanium High hardened steel
Conditions SKD61
Diameter (Ø)
6.0 3700 450 3200 380 1100 65

8.0 2800 400 2350 420 950 60
10.0 2250 325 1990 350 750 60
12.0 1990 300 1550 270 600 55
16.0 1550 250 1250 250 500 50
20.0 1200 180 900 150 350 50
Application tip
ap : 1.0D
ae : 0.05D
SB502 series Side machining - Normal speed
Workpiece Carbon steel, Cast iron Alloy steel, Pre-hardened steel Heat treated steel
Conditions 150~250HB HRC25~HRC35 HRC35~HRC45 HRC45~HRC55

Diameter (Ø)
2.0 19100 770 12800 370 10200 270 8900 190

4.0 10800 1100 7200 550 5700 400 5000 280
6.0 7700 1300 5200 660 4100 480 3600 330
8.0 6000 1400 4000 700 3200 510 2800 360
10.0 4800 1400 3200 700 2600 520 2300 370
12.0 4000 1400 2700 710 2200 530 1900 370
Application tip
ae : 0.2D ae : 0.1D
ap : 0.1D ap : 0.05D
516 KORLOY
SR505, SR507 series

Workpiece
Stainless steel 300 series Ni alloy, Ti alloy
Conditions
Diameter (Ø)
2.0 8900 210 6400 120

4.0 5000 310 3600 180
6.0 3600 380 2600 210
8.0 2800 400 2000 230
10.0 2300 410 1600 230
12.0 1900 410 1400 240
Application tip
ae : 0.2D ae : 0.1D
ap : 0.1D ap : 0.05D
SB504 series
Stainless steel 300 series, Titanium Stainless steel 400 series
Conditions ~HB230
Diameter (Ø)
3.0 13500 275 6690 105 9350 145

4.0 10100 370 5050 135 7000 185
5.0 8090 410 4050 165 5600 230
6.0 6750 480 3350 190 4700 265
8.0 5050 620 2500 250 3500 340
10.0 4050 780 2050 320 2800 430
12.0 3370 750 1680 310 2350 435
16.0 2530 700 1250 300 1750 395
20.0 2030 680 1000 290 1400 370
Application tip
ae : 0.5D
ap : 1.0D
KORLOY 517
S-Star Endmill
SF51H series Slotting
Workpiece Stainless Steel, Titanium alloys
Conditions SUS304, SUS316, Ti6A

R.P.M Feed
Diameter (Ø)
n (min -1) vf (mm/min)
3 5000 380
4 4800 350
5 4700 350
6 4400 340
7 3800 340
8 3300 340
9 3000 340
10 2700 330
12 2200 330
14 2000 310
16 1750 300
20 1300 210
Application tip
ap: D3~D5 = 0.3 × D
ap D6~D10 = 0.25mm × D
D12~D16 = 0.15mm × D
D18~D20 = 0.1mm × D
518 KORLOY
A-Star Endmill
WAB312
Workpiece Aluminium alloy Copper alloy
Conditions
6.0 18,000 1,750 5,500 440

8.0 14,000 2,000 4,200 500
10.0 14,000 2,350 4,200 580
12.0 14,000 3,000 4,200 750
16.0 11,000 2,700 3,300 670
20.0 8,000 2,200 2,200 600
Application tip
2.0D
0.5D
WAE301 Slotting, General Cutting

Workpiece Acrylic Alloy steels
Conditions
1.0 32,000 2,000 23,000 1,300

2.0 32,000 2,200 23,000 1,500
3.0 25,000 2,400 18,000 1,700
4.0 20,000 2,400 15,000 1,800
5.0 15,000 2,200 12,000 1,800
6.0 13,500 2,300 10,000 1,800
8.0 10,000 2,400 7,800 1,900
10.0 8,000 2,400 6,000 2,000
12.0 7,000 2,200 5,000 1,900
Application tip
1.0D
2.5D
KORLOY 519
A-Star Endmill
WAE302 Slotting, Side cutting
Workpiece Alloy steels, Cast iron Aluminium
Conditions ~HB230 -

1.0 16,870 505 16,870 845

1.5 13,150 525 13,150 790
2.0 11,300 565 11,300 790
2.5 10,565 635 10,565 845
3.0 10,000 700 10,000 900
4.0 10,000 900 10,000 1,100
5.0 10,000 1,000 10,000 1,300
6.0 10,000 1,200 10,000 1,500
7.0 8,850 1,240 8,850 1,505
8.0 8,000 1,400 8,000 1,800
9.0 8,000 1,550 8,000 1,680
10.0 8,000 1,700 8,000 2,100
12.0 8,000 2,100 8,000 2,600
14.0 6,000 1,800 6,000 2,200
16.0 6,000 1,900 6,000 2,400
18.0 4,000 1,400 4,000 1,800
20.0 4,000 1,600 4,000 1,900
Application tip A
1.0D
A : Ø3~Ø10 = 0.25 × D
1.0D
0.5D Ø12~Ø20 = 0.5 × D
520 KORLOY
WAE30(2)3, WAR303 Side cutting , General Cutting

Workpiece Aluminium, Non-ferrous metals
Conditions
R.P.M Feed
Diameter (Ø) n (min -1) vf (mm/min)
3 7,000 455
4 7,000 546
5 7,000 651
6 7,000 756
8 5,600 861
10 5,600 1,050
12 5,600 882
14 4,200 1106
16 4,200 1,211
18 2,800 910
20 2,800 956
Application tip
2.5D
0.15D
※ Please reduce cutting speed around 20~30% from the above table or AE323 series.
WAE30(2)3, WAR303 Slotting, General Cutting

Workpiece Aluminium, Non-ferrous metals
Conditions
R.P.M Feed
Diameter (Ø) n (min -1) vf (mm/min)
3 7,000 350
4 7,000 441
5 7,000 504
6 7,000 606
8 5,600 700
10 5,600 854
12 5,600 1,050
14 4,200 903
16 4,200 945
18 2,800 700
20 2,800 805
Application tip
1.0D
1.5D
※ Please reduce cutting speed around 20~30% from the above table or AE323 series.
KORLOY 521
A-Star Endmill
WAR302 Side cutting, General Cutting
Workpiece Aluminium alloy Aluminium alloy Aluminium alloy Aluminium alloy

(<Si 4%) (<Si 8%) (Die casting) (Cu)
Conditions
4 24,000 4,800 19,900 3,980 16,000 3,200 12,000 2,400

6 16,000 3,840 13,200 3,160 10,600 2,544 8,000 1,920
8 12,000 3,600 9,900 2,970 8,000 2,400 6,000 1,800
10 9,500 3,420 8,000 2,880 6,300 2,260 4,800 1,720
12 8,000 3,200 6,600 2,640 5,300 2,120 4,000 1,600
14 6,800 2,990 5,600 2,460 4,500 1,980 3,400 1,490
16 6,000 3,000 5,000 2,500 4,000 2,000 3,000 1,500
18 5,300 2,600 4,400 2,200 3,500 1,750 2,600 1,300
20 4,800 2,400 4,000 2,000 3,200 1,600 2,400 1,200
Application tip
1.5D
0.3D
WAR302 Slotting, General Cutting
Workpiece Aluminium alloy Aluminium alloy Aluminium alloy Aluminium alloy

(<Si 4%) (<Si 8%) (Die casting) (Cu)
Conditions
4 24,000 3,840 19,900 2,980 16,000 2,240 12,000 1,440

6 16,000 3,072 13,200 2,370 10,600 1,780 8,000 1,150
8 12,000 2,880 9,900 2,230 8,000 1,680 6,000 1,080
10 9,500 2,730 8,000 2,160 6,300 1,580 4,800 1,030
12 8,000 2,560 6,600 1,980 5,300 1,480 4,000 960
14 6,800 2,390 5,600 1,845 4,500 1,380 3,400 890
16 6,000 2,400 5,000 1,870 4,000 1,400 3,000 900
18 5,300 2,080 4,400 1,650 3,500 1,220 2,600 780
20 4,800 1,920 4,000 1,500 3,200 1,260 2,400 720
Application tip
1.0D
1.0D
522 KORLOY
WAR502 Side cutting, Slotting, General cutting
Workpiece Aluminium alloy Aluminum alloy casting

(A7075) (Si13%) Magnesium alloy · Copper alloys
Conditions
1.0 32,000 220 32,000 220 23,000 220

1.2 32,000 230 32,000 230 19,000 220
1.4 32,000 260 32,000 260 16,500 220
1.5 32,000 280 32,000 280 15,500 220
1.6 32,000 320 32,000 320 14,500 220
1.8 32,000 360 32,000 360 13,000 220
2.0 32,000 420 32,000 420 11,500 220
2.5 25,000 600 25,000 600 9,500 250
3.0 21,000 700 21,000 700 7,950 250
4.0 15,500 725 15,500 725 5,950 280
5.0 12,500 760 12,500 760 4,750 295
6.0 10,500 830 10,500 830 3,950 310
8.0 7,950 890 7,950 890 2,950 300
10.0 6,350 995 6,350 995 2,350 365
12.0 5,300 1,050 5,300 1,050 1,950 390
Application tip
2.5D 0.5D
0.15D
WAR502 Side cutting, Slotting, High speed cutting

Conditions
1.0 50,000 1,000 50,000 950 42,000 700

1.2 50,000 1,200 50,000 1,150 36,000 700
1.4 50,000 1,400 50,000 1,250 31,000 700
1.5 50,000 1,600 48,000 1,250 29,500 700
1.6 50,000 1,700 45,000 1,250 28,000 700
1.8 50,000 1,850 41,000 1,250 26,500 750
2.0 50,000 2,000 38,000 1,250 24,000 750
2.5 48,000 2,100 31,000 1,250 20,000 750
3.0 40,000 2,100 26,000 1,250 17,000 750
4.0 33,000 2,250 20,000 1,350 14,000 800
5.0 31,000 2,800 19,200 1,650 12,500 950
6.0 26,000 2,800 15,900 1,700 10,500 1,000
8.0 19,500 2,900 12,000 1,800 7,900 1,000
10.0 15,500 3,200 9,600 1,900 6,350 1,100
12.0 13,000 3,200 8,000 1,900 5,300 1,100
Application tip
ae ap ap
1D Aluminium alloy, Aluminum alloy casting 0.15D Aluminium alloy, Aluminum alloy casting 0.15D
Magnesium alloy, Copper alloys 0.1D Magnesium alloy, Copper alloys 0.1D
ae
KORLOY 523
A-Star Endmill
WAR503 Side cutting , General Cutting

Conditions
3 21,000 1,100 21,000 1,100 7,950 325

4 15,500 1,250 15,500 1,250 5,950 365
5 12,500 1,300 12,500 1,275 4,750 385
6 10,500 1,400 10,500 1,400 3,950 400
8 7,950 1,500 7,950 1,500 2,950 460
10 6,350 1,700 6,350 1,700 2,350 475
12 5,300 1,750 5,300 1,750 1,950 510
16 3,950 1,750 3,950 1,750 1,450 510
20 3,150 1,750 3,150 1,750 1,150 510
Application tip
1D
0.2D
WAR503 Side cutting , High speed cutting

Conditions
3 40,000 2,100 24,000 1,250 17,000 625

4 32,000 2,250 19,200 1,550 14,300 800
5 32,000 3,250 19,200 1,950 12,700 925
6 26,500 3,500 15,900 2,150 10,600 960
8 20,000 3,750 12,000 2,250 8,000 1,130
10 16,000 4,300 9,600 2,580 6,350 1,150
12 13,300 4,400 8,000 2,650 5,300 1,250
16 10,000 4,400 6,000 2,650 4,000 1,250
20 8,000 4,400 4,800 2,650 3,200 1,250
Application tip
1D
0.2D
524 KORLOY
WAR503 Slotting, General Cutting

Conditions
3 21,000 770 2,100 770 7,950 325

4 15,500 810 15,500 810 5,950 375
5 12,500 860 12,500 860 4,750 385
6 10,500 950 10,500 950 3,950 400
8 8,000 1,000 8,000 1,000 2,950 460
10 6,350 1,150 6,350 1,150 2,350 475
12 5,300 1,200 5,300 1,200 1,950 510
16 3,950 1,200 3,950 1,200 1,450 510
20 3,150 1,200 3,150 1,200 1,150 510
Application tip
1.0D
0.5D
WAR503 Slotting, High speed cutting

(A7075) (Si13%)
Conditions
3 40,000 1,450 24,000 880

4 32,000 1,700 19,200 1,000
5 32,000 2,200 19,200 1,350
6 26,500 2,400 15,900 1,450
8 20,000 2,500 12,000 1,500
10 16,000 2,800 9,600 1,700
12 13,300 2,950 8,000 1,800
16 10,000 3,000 6,000 1,800
20 8,000 3,000 4,800 1,800
Application tip
1.0D
0.25D
KORLOY 525
A-Star Endmill
WAF303 Slotting
Workpiece aluminium, Non-ferrous metals

Conditions
6 10,500 800 13,500 1,050

8 8,000 700 10,500 900
10 6,500 750 8,500 950
12 5,250 800 6,800 1,050
16 4,000 800 5,200 1,050
20 3,200 800 4,200 1,050
Application tip
1.0D
1.5D 1.5D
0.5D
526 KORLOY
D Endmill
Flat type
Tool DFE2000 (Slotting) DFE2000 (Shouldering) DFE4000 (Shouldering)
Workpiece Graphite
Conditions R.P.M Feed R.P.M Feed R.P.M Feed
1.0 40,000 500 40,000 700 - -

2.0 25,000 570 25,000 800 25,000 1,600
3.0 20,000 570 20,000 800 20,000 1,600
4.0 18,000 680 18,000 950 18,000 1,900
5.0 14,000 960 14,000 1,200 14,000 2,400
6.0 11,000 1,000 11,000 1,400 11,000 2,800
8.0 8,000 930 8,000 1,300 8,000 2,600
10.0 6,500 860 6,500 1,200 6,500 2,400
12.0 5,500 860 5,500 1,200 5,500 2,400
Application tip
•D ≤ Ø2.5, ap = 1.5D, ae = 0.05D •D ≤ Ø2.5, ap = 0.3D

•D > Ø2.5, ap = 1.5D, ae = 0.1D •D > Ø2.5, ap = 0.5D
Ball type
Tool DBE2000 DBE4000
Workpiece Graphite
Conditions R.P.M Feed R.P.M Feed
1.0 16,000 400 - -

2.0 16,000 800 16,000 1,200
3.0 16,000 1,450 16,000 2,000
4.0 16,000 2,100 16,000 3,100
5.0 15,500 2,550 15,000 3,800
6.0 15,000 2,950 15,000 4,400
8.0 13,000 3,000 13,000 4,500
10.0 11,500 3,000 12,000 4,600
12.0 10,700 3,200 10,000 4,700
Application tip
•ap = 0.2D
•pf = 0.2D
Notice
tCutting conditions are up to the machine’s condition and the shape of cutting
tWorkpiece should be clamped rigidly. In case of vibrations, reduce RPM and feed rate by the same ratio
tWhen the overhang is longer than 3D, reduce RPM and feed rate
KORLOY 527
T Endmill
Titanium/Co-Cr
R.P.M Feed
Diameter (Ø) Application ap (mm) ae (mm)
3.0 Roughing 0.12 0.7 10,500 1,150
2.5 Medium 0.08 0.53 11,500 850
2.0 Medium 0.08 0.42 14,500 850
1.5 Finishing 0.04 0.32 19,000 850
1.0 Finishing 0.02 0.07 28,500 850
0.6 Finishing 0.02 0.07 28,500 850
Zirconia
R.P.M Feed
Diameter (Ø) Application ap (mm) ae (mm)
3.0 Roughing 0.5 1.5 23,500 1,600
2.5 Medium 0.3 1.25 28,000 1,200
2.0 Finishing 0.3 1.0 35,000 1,200
1.0 Finishing 0.1 0.2 38,500 1,050
0.6 Finishing 0.1 0.2 63,500 630
PCD Endmill
vc n fz
Workpiece
(m/min) (min -1) (mm/t)
Aluminum Alloy, Copper 30~300 2,000~12,000 0.02~0.07
Reinforced Plastic 35~300 2,800~16,000 0.04~0.12
Carbon steel, Graphite 10~100 5,300~16,000 0.04~0.2
528 KORLOY
MSD Plus
Depth of cut = 10D~25D
Workpiece
Grade vc (m/min) Feed rate (mm/rev) per drill dia. (mm)
ISO Workpiece HB Ø1.0~Ø4.0 Ø4.1~Ø8.0 Ø8.1~Ø12.0 Ø12.1~Ø16.0 Ø16.1~Ø20.0
Low carbon steel 80~120 PC325U 90 (80~150) 0.10~0.15 0.16~0.24 0.20~0.30 0.25~0.36 0.30~0.40
Carbon
steel
High carbon steel Over 250 PC325U 50 (40~80) 0.08~0.20 0.08~0.20 0.10~0.25 0.15~0.25 0.15~0.30
Low alloy steel 140~260 PC325U 90 (80~150) 0.10~0.15 0.16~0.24 0.20~0.30 0.25~0.36 0.30~0.40
P
Hardened low
200~400 PC325U 60 (50~100) 0.10~0.15 0.16~0.24 0.20~0.30 0.25~0.36 0.30~0.40
Alloy alloy steel
steel
High alloy steel 50~260 PC325U 50 (40~80) 0.08~0.20 0.08~0.20 0.10~0.25 0.15~0.25 0.15~0.30
Hardened
over 250 PC325U 50 (40~80) 0.08~0.20 0.08~0.20 0.10~0.25 0.15~0.25 0.15~0.30
high alloy steel
Austenite series 135~275 PC325U 45 (25~80) 0.05~0.20 0.05~0.20 0.10~0.25 0.10~0.25 0.15~0.30
M
Stainless
steel Ferrite series
135~275 PC325U 50 (30~80) 0.05~0.20 0.05~0.20 0.10~0.25 0.10~0.25 0.15~0.30
Martensite series
Gray cast iron 150~230 PC325U 100 (80~150) 0.10~0.15 0.16~0.24 0.20~0.30 0.25~0.36 0.30~0.40
Cast
K
iron
Ductile cast iron 160~260 PC325U 90 (70~140) 0.10~0.15 0.16~0.24 0.20~0.30 0.25~0.36 0.30~0.40
Aluminum Aluminum alloy 30~150 FG2 150 (125~220) 0.24~0.38 0.38~0.53 0.53~0.75 0.61~0.85 0.68~0.98
N
Copper
Copper alloy 150~160 FG2 150 (125~220) 0.10~0.15 0.16~0.24 0.20~0.30 0.25~0.36 0.30~0.40
alloy
•Cutting conditions above are for the case of less than 5D depth of cut and through coolant system applied
•In case of external coolant system, reduce the above feed values by 20%
MSD Plus-S
Workpiece
HB Grade vc (m/min) Feed rate (mm/rev) per drill dia. (mm)
ISO Workpiece Ø2.5~Ø5.0 Ø5.1~Ø8.0 Ø8.1~Ø12.0 Ø12.1~Ø16.0
Fe-base 25~35 PC325T 25~30 0.055~0.07 0.07~0.10 0.08~0.13 0.10~0.15

Heat resistant
alloy
Ni or Co base 35~45 PC325T 20~25 0.045~0.06 0.06~0.09 0.07~0.12 0.09~0.14

Pure titanium 10~15 PC325T 40~50 0.07~0.11 0.09~0.14 0.12~0.18 0.16~0.23
Titanium
њDQGћDOOR\V 35~45 PC325T 30~40 0.05~0.09 0.07~0.12 0.10~0.16 0.14~0.21
•Cutting conditions above are for the case of less than 5D depth of cut and through coolant system applied.
KORLOY 529
MLD Plus
Workpiece Grade
vc (m/min) Feed rate (mm/rev) per drill dia. (mm)
ISO Workpiece HB Recommended Ø3.0~Ø5.0 Ø5.1~Ø8.0 Ø8.1~Ø10.0
Low carbon steel 80~120 PC315G 80 (60~90) 0.10~0.15 0.15~0.20 0.20~0.25

Carbon
steel
High carbon steel 180~280 PC315G 70 (60~80) 0.10~0.15 0.15~0.20 0.20~0.25
P
Low alloy steel 140~260 PC215G 80 (60~90) 0.10~0.15 0.12~0.17 0.15~0.20
Alloy
steel
Low carbon steel 50-260 PC215G 70 (60~80) 0.08~0.15 0.10~0.15 0.15~0.20
Gray cast iron 150-230 PC215G 80 (60~100) 0.10~0.20 0.15~0.20 0.15~0.20

Cast
K
iron
Ductile cast iron 160-260 PC215G 70 (60~80) 0.10~0.20 0.15~0.20 0.15~0.20
Aluminum Aluminum alloy 30-150 FG2 120 (100~150) 0.12~0.17 0.15~0.20 0.20~0.25
N
Copper lloy Copper alloy 150-160 FG2 120 (100~150) 0.12~0.17 0.15~0.20 0.20~0.25
MSD Plus CFRP

Depth of cut = 5D
Workpiece Grade vc (m/min) Feed rate (mm/rev) per drill dia. (mm)
Ø2.5~Ø4.0 Ø4.1~Ø8.0 Ø8.1~Ø12.0
CFRP ND2100 100 (100~150) 0.03 ~ 0.07 0.03 ~ 0.07 0.03 ~ 0.07
MSFD
Feed (Depth of cut = 2D~3D)
Workpiece Grade Cutting
speed, Feed rate (mm/rev) per drill dia. (mm)
vc (m/min)
ISO Workpiece HB Recommended Ø2.5~Ø4.0 Ø4.1~Ø8.0 Ø8.1~Ø12.0
Low carbon steel 80~120 PC325U 75 (60~90) 0.03~0.10 0.05~0.15 0.10~0.20

Carbon
steel
High carbon steel 180~280 PC325U 75 (60~80) 0.03~0.10 0.05~0.15 0.10~0.20
P
Low alloy steel 140~260 PC325U 65 (50~80) 0.03~0.10 0.05~0.15 0.10~0.20
Alloy
steel
High alloy steel 50~260 PC325U 65 (50~80) 0.03~0.10 0.05~0.15 0.10~0.20
530 KORLOY
P-Star Drill
HPI503, 505, 508, HP503
Workpiece
Non-Alloyed steel Alloy steels Gray cast iron Gray cast iron
Solidity
< 700N/mm2 < 1000N/mm2 < HB240, GG25 < HB300, GG40
Conditions
Diameter (Ø) n (min -1) fn (mm/rev) n (min -1) fn (mm/rev) n (min -1) fn (mm/rev) n (min -1) fn (mm/rev)
1 16,250 0.05 14,800 0.05 26,600 0.05 17,300 0.05

2 16,250 0.07 14,800 0.07 26,600 0.07 17,300 0.07
3 16,000 0.16 14,500 0.16 26,000 0.16 17,000 0.16
4 12,000 0.17 11,000 0.17 20,000 0.17 13,000 0.17
5 9,550 0.18 8,600 0.18 16,000 0.18 10,000 0.18
6 8,000 0.2 7,200 0.2 13,000 0.2 8,500 0.2
7 6,800 0.22 6,100 0.22 11,500 0.22 7,300 0.22
8 6,000 0.24 5,400 0.24 9,900 0.24 6,400 0.24
9 5,300 0.27 4,800 0.27 8,800 0.27 5,700 0.27
10 4,800 0.3 4,300 0.3 8,000 0.3 5,100 0.3
12 4,000 0.33 3,600 0.33 6,600 0.33 4,250 0.33
14 3,400 0.36 3,050 0.36 5,700 0.36 3,650 0.36
16 3,000 0.39 2,700 0.39 5,000 0.39 3,200 0.39
18 2,650 0.42 2,400 0.42 4,400 0.42 2,850 0.42
20 2,400 0.45 2,150 0.45 4,000 0.45 2,550 0.45
※ Apply to the feed rate for each product as follows.

HPI503(3×D): Feed 100%
HPI505(5×D): Feed 90%
HPI508(8×D): Feed 70~80%
KORLOY 531
P-Star Drill
PF50, P50, HP50 Series
(C<0.3%) (C≥0.3%) SUJ2· SKD61 SKD11 Cast iron Ductile
HRC43~48
Alloy steels/SS400 Alloy steels/S50C SUS440 HRC34~43 HRC48~53 FC 250~350 FC 400~500
V
SCM~710N/mm2 SCM~1.060N/mm2
Conditions 80~125m/min 80~125m/min 63~80m/min 40~63m/min 32~45m/min 25~36m/min 80~125m/min 63~90m/min
R.P.M Feed R.P.M Feed R.P.M Feed R.P.M Feed R.P.M Feed R.P.M Feed R.P.M Feed R.P.M Feed
Diameter (Ø) n (min -1) fn (mm/rev) n (min -1) fn (mm/rev) n (min -1) fn (mm/rev) n (min -1) fn (mm/rev) n (min -1) fn (mm/rev) n (min -1) fn (mm/rev) n (min -1) fn (mm/rev) n (min -1) fn (mm/rev)
2 12,000 0.06~0.08 12,000 0.06~0.08 11,000 0.06~0.08 8,000 0.06~0.08 6,000 0.05~0.07 4,500 0.03~0.06 15,000 0.06~0.08 11,000 0.06~0.08
3 9,600 0.09~0.12 9,600 0.09~0.12 7,500 0.09~0.12 5,300 0.09~0.12 4,000 0.07~0.11 3,200 0.05~0.09 10,000 0.09~0.12 7,600 0.09~0.12
4 8,000 0.10~0.15 8,000 0.10~0.15 5,650 0.10~0.15 4,000 0.10~0.15 3,000 0.08~0.13 2,600 0.06~0.10 8,000 0.10~0.15 6,000 0.10~0.15
5 6,400 0.12~0.18 6,400 0.12~0.18 4,550 0.12~0.18 3,300 0.12~0.18 2,400 0.10~0.15 2,000 0.8~0.12 6,400 0.12~0.18 4,800 0.12~0.18
6 5,300 0.14~0.20 5,300 0.14~0.20 3,800 0.14~0.20 2,750 0.14~0.20 2,000 0.12~0.18 1,700 0.09~0.15 5,300 0.14~0.20 4,000 0.14~0.20
8 4,000 0.16~0.24 4,000 0.16~0.24 2,850 0.16~0.24 2,100 0.16~0.24 1,500 0.14~0.22 1,300 0.12~0.20 4,000 0.16~0.24 3,000 0.16~0.24
10 3,200 0.18~0.27 3,200 0.18~0.27 2,250 0.18~0.27 1,700 0.18~0.27 1,200 0.15~0.25 1,000 0.13~0.23 3,200 0.18~0.27 2,400 0.18~0.27
12 2,650 0.20~0.30 2,650 0.20~0.30 1,900 0.20~0.30 1,400 0.20~0.30 1,000 0.17~0.26 850 0.14~0.24 2,700 0.20~0.30 2,000 0.20~0.30
14 2,300 0.22~0.35 2,300 0.22~0.35 1,600 0.22~0.35 1,200 0.22~0.35 860 0.18~0.30 730 0.15~0.26 2,300 0.22~0.35 1,700 0.22~0.35
16 2,000 0.25~0.36 2,000 0.25~0.36 1,400 0.25~0.36 1,050 0.25~0.36 760 0.20~0.32 640 0.16~0.26 2,000 0.25~0.36 1,500 0.25~0.36
18 1,800 0.28~0.38 1,800 0.28~0.38 1,250 0.28~0.38 920 0.28~0.38 670 0.23~0.33 570 0.18~0.28 1,800 0.28~0.38 1,350 0.28~0.38
20 1,600 0.30~0.40 1,600 0.30~0.40 1,150 0.30~0.40 850 0.30~0.40 600 0.25~0.35 500 0.20~0.30 1,600 0.30~0.40 1,200 0.30~0.40
SF503, SF505, SF508, PI503, PI505 Series

(C<0.3%) (C≥0.3%) SUJ2· SKD61 SKD11 Cast iron Ductile
HRC43~48
Alloy steels/SS400 Alloy steels/S50C SUS440 HRC34~43 HRC48~53 FC 250~350 FC 400~500
V
Conditions 80~125m/min 80~125m/min 63~80m/min 40~63m/min 32~45m/min 25~36m/min 80~125m/min 63~90m/min
R.P.M Feed R.P.M Feed R.P.M Feed R.P.M Feed R.P.M Feed R.P.M Feed R.P.M Feed R.P.M Feed
Diameter (Ø) n (min -1) fn (mm/rev) n (min -1) fn (mm/rev) n (min -1) fn (mm/rev) n (min -1) fn (mm/rev) n (min -1) fn (mm/rev) n (min -1) fn (mm/rev) n (min -1) fn (mm/rev) n (min -1) fn (mm/rev)
3 13,000 0.09~0.12 12,000 0.09~0.12 7,600 0.09~0.12 6,400 0.09~0.12 5,300 0.07~0.11 3,800 0.05~0.09 12,000 0.09~0.12 8,500 0.09~0.12
4 10,000 0.1~0.15 9,500 0.1~0.15 5,700 0.1~0.15 4,800 0.1~0.15 4,000 0.08~0.13 2,950 0.06~0.1 9,000 0.1~0.15 6,350 0.1~0.15
5 8,000 0.12~0.18 7,600 0.12~0.18 4,600 0.12~0.18 3,800 0.12~0.18 3,200 0.1~0.15 2,300 0.08~0.12 7,600 0.12~0.18 5,100 0.12~0.18
6 6,600 0.14~0.20 6,400 0.14~0.20 3,800 0.14~0.20 3,200 0.14~0.20 2,650 0.12~0.18 1,900 0.09~0.15 6,400 0.14~0.20 4,250 0.14~0.20
8 5,000 0.16~0.24 4,800 0.16~0.24 2,900 0.16~0.24 2,400 0.16~0.24 2,000 0.14~0.22 1,450 0.12~0.2 4,800 0.16~0.24 3,200 0.16~0.24
10 4,000 0.18~0.27 3,800 0.18~0.27 2,300 0.18~0.27 1,900 0.18~0.27 1,600 0.15~0.25 1,150 0.13~0.23 3,800 0.18~0.27 2,550 0.18~0.27
12 3,300 0.20~0.30 3,200 0.20~0.30 1,900 0.20~0.30 1,600 0.20~0.30 1,300 0.17~0.26 950 0.14~0.24 3,200 0.20~0.30 2,100 0.20~0.30
14 2,800 0.22~0.35 2,700 0.22~0.35 1,600 0.22~0.35 1,350 0.22~0.35 1,150 0.18~0.3 800 0.15~0.26 2,700 0.22~0.35 1,800 0.22~0.35
16 2,500 0.25~0.36 2,400 0.25~0.36 1,400 0.25~0.36 1,200 0.25~0.36 1,000 0.2~0.32 700 0.16~0.26 2,400 0.25~0.36 1,600 0.25~0.36
18 2,200 0.28~0.38 2,100 0.28~0.38 1,300 0.28~0.38 1,100 0.28~0.38 900 0.23~0.33 650 0.18~0.28 2,100 0.28~0.38 1,400 0.28~0.38
20 2,000 0.30~0.40 1,900 0.30~0.40 1,150 0.30~0.40 1,000 0.30~0.40 800 0.25~0.35 600 0.2~0.3 1,900 0.30~0.40 1,250 0.30~0.40
t SF503(3×D): fn 100%
t SF505(5×D): fn 90%
t SF508(8×D): fn 70~80%
532 KORLOY
W-Star Drill
NDPG Series
(C<0.3%) (C>0.3%) Grey cast iron Grey cast iron
Stainless steels
Alloy steels/SS400 Alloy steels/S50C < HB240 < HB350
V
Conditions 80~120m/min 80~120m/min 120~200m/min 80~130m/min 40~45m/min
Mill Dia (mm) n (min -1) fn (mm/rev) n (min -1) fn (mm/rev) n (min -1) fn (mm/rev) n (min -1) fn (mm/rev) n (min -1) fn (mm/rev)
1 13,000 0.04 13,000 0.04 21,300 0.04 14,200 0.04 7,160 0.03
2 13,000 0.06 13,000 0.06 21,300 0.06 14,200 0.06 7,160 0.04
3 13,000 0.13 13,000 0.13 21,000 0.13 14,000 0.13 4,780 0.07
4 9,500 0.14 9,500 0.14 16,000 0.14 10,500 0.14 3,600 0.08
5 7,600 0.15 7,600 0.15 13,000 0.15 8,300 0.15 2,850 0.09
6 6,400 0.17 6,400 0.17 11,000 0.17 6,900 0.17 2,400 0.1
8 4,800 0.21 4,800 0.21 8,000 0.21 5,200 0.21 1,800 0.12
10 3,800 0.25 3,800 0.25 6,400 0.25 4,150 0.25 1,450 0.15
12 3,200 0.27 3,200 0.27 5,300 0.27 3,450 0.27 1,200 0.17
14 2,750 0.29 2,750 0.29 4,550 0.29 3,000 0.29 1,000 0.19
16 2,400 0.31 2,400 0.31 4,000 0.31 2,600 0.31 900 0.21
18 2,100 0.33 2,100 0.33 3,550 0.33 2,300 0.33 800 0.23
20 1,900 0.35 1,900 0.35 3,200 0.35 2,100 0.35 700 0.25
※ NDPG507: Use 85% to the above condition
SSD-N
SSD-N
Workpiece Tool steels, Aluminium,
Brass, Bronze Epoxy, Resin
Alloy steels Aluminium alloy
Conditions
Diameter (Ø) n (min -1) fn (mm/rev) n (min -1) fn (mm/rev) n (min -1) fn (mm/rev) n (min -1) fn (mm/rev)
3 4,000~7,000 0.02 10,000~12,000 0.03 7,000~10,000 0.02 9,000~12,000 0.08

5 2,400~4,200 0.03 6,000~8,000 0.05 4,200~6,000 0.04 5,400~7,200 0.08
8 1,500~2,600 0.05 3,700~5,000 0.08 2,600~3,700 0.08 3,400~4,500 0.09
12 1,000~1,700 0.06 2,500~3,200 0.12 1,700~2,500 0.12 2,200~3,000 0.11
Workpiece Feed rate (mm/rev) per drill dia. (mm)

Grade vc (m/min)
ISO Workpiece HB Ø2.5~Ø4.0 Ø4.1~Ø8.0 Ø8.1~Ø12.0 Ø12.1~Ø15.0
Carbon
P Low carbon steel 80~120 35 (20~65) 0.02~0.06 0.04~0.08 0.06~0.12 0.10~0.16
steel
Aluminum Aluminum alloy 30-150 Carbide 100 (94~120) 0.03~0.06 0.05~0.08 0.08~0.12 0.12~0.18
N
Copper
Copper alloy 150-160 80 (65~95) 0.03~0.06 0.05~0.08 0.08~0.12 0.12~0.18
alloy
KORLOY 533
Burnishing Drill
Feed rate (mm/rev) per drill dia. (mm)
Cutting speed
Workpiece
vc (m/min)
Ø2.0~3.0 Ø3.5~5.0 Ø5.5~8.0 Ø8.5~12.0 Ø12.5~18.0
Aluminum alloy,
30~60 0.02~0.05 0.03~0.10 0.04~0.15 0.05~0.20 0.05~0.30
Copper alloy
Aluminum alloy
50~80 0.02~0.05 0.03~0.10 0.04~0.15 0.05~0.20 0.05~0.30
for die castings
Cast iron (GC)

25~60 0.01~0.04 0.02~0.08 0.05~0.12 0.05~0.20 0.05~0.30
Ductile cast
Iron (GCD) 20~50 0.01~0.03 0.02~0.05 0.03~0.08 0.04~0.12 0.05~0.15
Top Solid Drill

Diameter Cutting condition Ductile cast iron Gray cast iron Soft steel
vc (m/min) 30 (20~35) 40 (20~60) 100 (50~150)

Ø8.0~Ø10.0
fn (mm/rev) 0.30 (0.20~0.40) 0.30 (0.20~0.40) 0.15 (0.10~0.20)
vc (m/min) 50 (30~70) 60 (30~80) 130 (70~200)

Ø10.1~Ø15.0
fn (mm/rev) 0.35 (0.30~0.40) 0.35 (0.30~0.40) 0.15 (0.10~0.20)
vc (m/min) 60 (50~60) 75 (50~100) 150 (100~250)

Ø15.1~Ø25.0
fn (mm/rev) 0.35 (0.30~0.45) 0.40 (0.30~0.50) 0.15 (0.10~0.20)
534 KORLOY
PCD Drill
Workpiece vc (m/min) fn (mm/rev)
CFRP 0.075 (0.05~0.25)
Aluminum alloy 50~250 0.050 (0.03~0.20)
Counter sink section 0.040 (0.02~0.15)
Gun Drill
Cutting Feed rate (mm/rev) per drill dia. (mm)
Hardness
Workpiece speed
(HB)
vc (m/min) ~Ø4 ~Ø6 ~Ø10 ~Ø14 ~Ø24 Ø25~
~150 100~150 0.005~0.015 0.010~0.025 0.015~0.035 0.020~0.050 0.030~0.070 0.040~0.080
150~250 80~120 0.005~0.010 0.010~0.020 0.015~0.030 0.020~0.040 0.030~0.060 0.030~0.060

Carbon steel
Alloy steel
250~350 50~100 0.005~0.010 0.005~0.010 0.010~0.020 0.015~0.030 0.020~0.040 0.020~0.040
350~ ~30 - 0.005~0.010 0.005~0.010 0.010~0.020 0.020~0.035 0.020~0.035
~250 50~80 0.005~0.015 0.010~0.020 0.010~0.020 0.010~0.030 0.020~0.035 0.020~0.040

Stainless steel
250~350 40~50 - 0.005~0.015 0.010~0.015 0.010~0.020 0.010~0.020 0.010~0.020
~220 80~100 0.010~0.0120 0.020~0.040 0.030~0.050 0.040~0.080 0.080~0.120 0.100~0.150

Cast iron
220~ 40~80 0.005~0.010 0.005~0.015 0.010~0.020 0.015~0.030 0.020~0.050 0.025~0.070
Aluminum alloy - 180~250 0.010~0.020 0.020~0.040 0.030~0.060 0.040~0.080 0.100~0.180 0.150~0.200
Light alloy - 120~200 0.005~0.010 0.010~0.020 0.020~0.025 0.020~0.030 0.030~0.040 0.040~0.060
KORLOY 535
PCD Reamer
For high speed and high precision machining
Workpiece vc (m/min) fn (mm/rev)
Aluminum alloy 50 ~ 250 0.05~0.20
Cermet Reamer
Workpiece Hardness fz (mm/t) vc (m/min)
Carbon steel Under HRC30 0.1~0.4 50~80
HRC30 ~ 40 0.1~0.4 80~120

High carbon steel,
Alloy steel
HRC40 ~ 50 0.1~0.4 50~80
Alloy steel More than HRC50 0.05~0.2 30~60
536 KORLOY
Counter Sink
CSPC
Alloy steels & carbon steels Pre-hardened steels Stainless steels Hardened steels
Aluminum alloy
under HRC30 HRC30~45 HRC30~50 HRC45~55
Diameter
(Ø)
n (min -1) (mm/min) n (min -1) (mm/min) n (min -1) (mm/min) n (min -1) (mm/min) n (min -1) (mm/min)
6.0 3,030 1,550 1,820 600 1,520 500 1,350 240 7,580 3,870
8.0 2,300 1,520 1,370 580 1,150 480 1,015 270 5,750 3,800
10.0 1,840 1,490 1,100 590 920 500 810 270 4,590 3,720
12.0 1,540 1,480 930 610 780 510 690 270 3,850 3,700
16.0 1,150 1,310 690 520 570 460 505 260 2,890 3,470
CSNC/CSHC 1F(Hole) Type

Alloy steels & carbon steels Pre-hardened steels
Stainless steels Aluminum alloy
under HRC30 HRC30~45
Diameter
(Ø)
vc Feed vc Feed vc Feed vc Feed
(m/min) (mm/min) (m/min) (mm/min) (m/min) (mm/min) (m/min) (mm/min)
~ 10.0 121 120 50 350

10.0 ~ 20.0 42~72 110 28~48 70 15~17 25 50~110 230
20.0 ~ 30.0 75 50 20 200
CSNC 3F Type
Diameter
(Ø)
~ 10.0 170 100 30 350

10.0 ~ 20.0 30~60 85 20~40 60 10~12 16 40~100 230
20.0 ~ 30.0 60 40 10 200
CSPH
Alloy steels & carbon steels Pre-hardened steels Stainless steels Hardened steels
Aluminum alloy
under HRC30 HRC30~45 HRC30~50 HRC45~55
Diameter
(Ø)
n (min -1) (mm/min) n (min -1) (mm/min) n (min -1) (mm/min) n (min -1) (mm/min) n (min -1) (mm/min)
6.3 1,328 230 1,970 350 905 160 807 140 5,760 1,040
8.3 995 230 1,490 360 690 160 610 140 4,370 1,050
10.4 792 230 1,190 360 550 160 487 130 3,485 940
12.4 665 230 1,000 360 460 150 407 130 2,920 960
16.5 500 230 750 360 345 160 307 140 2,200 990
20.5 402 230 600 360 276 160 247 140 1,770 1,010
KORLOY 537
Counter Sink
CSNH/CSHH 1F(Hole) Type
Diameter
(Ø)
~ 10.0 110 55 255 450

10.0 ~ 20.0 20-30 55 16-20 35 50-60 180 50-100 350
20.0 ~ 30.0 35 55 150 300
CSNH 3F Type
Stainless steels Aluminum alloy Plastic
Diameter
(Ø)
vc Feed vc Feed vc Feed vc Feed vc Feed
(m/min) (mm/min) (m/min) (mm/min) (m/min) (mm/min) (m/min) (mm/min) (m/min) (mm/min)
~ 10.0 60 35 30 255 400

10.0 ~ 20.0 10~15 30 8~12 25 4~6 16 50~60 180 35~70 300
20.0 ~ 30.0 20 15 10 150 250
538 KORLOY
KORLOY
SOLID TOOLS
SOLUTION
For the safe metalcutting
Use safety supplies such as protective gloves to prevent Properly manage the tool change phase because the Prepare for fire prevention measures as the use of
possible injury while touching the edge of tools. inordinately used tool can be easily broken under the non-water soluble cutting oil may cause fire.
Use safety glasess or safety cover to hedge possible the excessive cutting load or severe wear, and it may Use safety cover and other safety supplies because
dangers. Inappropriate usage or excessive cutting threat the operator's safety. the spare parts or the inserts can be pulled out due
condition may lead tool's breakage or even the Use safety cover because chips evacuated during to centrifugal force while high speed machining.
fragment's scattering. cutting are hot and sharp and may cause burns and
Clamp the workpiece tightly enough to prevent its cuts. To remove chips safely, stop machining, put on
movement while its machining. protective gloves, and use a hook or other tools.
+HDG2IÀFH: Holystar B/D, 326, Seocho-daero, Seocho-gu, Seoul, 06633, Republic of Korea
Tel : +82-2-522-3181 Fax : +82-2-522-3184, +82-2-3474-4744 Web : www.korloy.com E-mail : sales.khq@korloy.com
620 Maple Avenue, Torrance, CA 90503, USA Gablonzer Str. 25-27, 61440 Oberursel, Germany
Tel : +1-310-782-3800 Toll Free : +1-888-711-0001 Fax : +1-310-782-3885 Tel : +49-6171-277-83-0 Fax : +49-6171-277-83-59
E-mail : sales.kai@korloy.com E-mail : sales.keg@korloy.com
Plot No. 415, Sector 8, IMT Manesar, Gurgaon 122051, Haryana, India Av. Aruana 280, conj.12, WLC, Alphaville, Barueri,
Tel : +91-124-4391790 Fax : +91-124-4050032 CEP06460-010, SP, Brasil
E-mail : sales.kip@korloy.com Tel : +55-11-4193-3810 E-mail : sales.kbl@korloy.com
Serifali Mahallesi, Burhan Sokak NO: 34 $Y3URYLGHQFLD2IÀFH

Dudullu OSB/Umraniye/Istanbul, 34775, Turkiye Providencia-Santiago, Chile
Tel : +90-216-415-8874 E-mail : sales.ktl@korloy.com Tel : +56-229-295-490 E-mail : sales.kcs@korloy.com
.UDVLY\'RPRIÀFH1R%OG1RYRYODG\NLQVNL\SURH]G Calle R. M. Clemencia Borja Taboada 522, Jurica Acueducto,

Moscow, Russia 76230 Juriquilla, Qro., Mexico
Tel : +7-495-280-1458 Fax : +7-495-280-1459 E-mail : sales.krc@korloy.com Tel: +52-442-673-7388 E-mail: sales.kml@korloy.com
Plot No. 415, Sector 8, IMT Manesar, Gurgaon 122051, Haryana, India
Tel : +91-124-4391790 Fax : +91-124-4050032
E-mail : pro.kim@korloy.com
PC03-EM-06 / 20230101

Technical Information KORLOY: Endmill

Uploaded by

Copyright:

Available Formats

Technical Information KORLOY: Endmill

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Technical Information KORLOY: Endmill

Uploaded by

Copyright:

Available Formats

Technical Information KORLOY

Endmill Endmill index 20

Super Endmill [ for difficult-to-cut materials(HRSA/Ti) ] 030

Drill index 272 Drill

Reamer / Chamfer / Thread index 336 Reamer

Chamfer Tool 345

Thread Mill 352

Recommended cutting conditions 409

Suitable for high speed machining of hardened

U-Star Endmill is suitable for machining medium hardness workpieces

Full line-up available with various shapes like miniature type,

For mold & die

See page 112.

- Cost-saving cutting edge design foor highly

See page 221.

High machining efficiency

Suitable for the hard-to-cut and low hardness material

Suitable for Aluminum, aluminum alloy and non-ferrous

One-Pass grinding applied Inhibited unevenness and

Tangential cutting edge design for

Router Endmill optimized for machining composite materials

Router Endmill Series for Machining

See page 262.

Optimized cutting performance by matching a proper grade

Endmill Series for Dental Prostheses

See page 268.

The Hole Machining Tool for

See page 290.

MSD Plus CFRP

Strong wear resistance by the new diamond-coated

MSFD - High-quality drilling availability in ramped

Improved resistance to chipping and welding, and

See page 297.

Drill applied with DIN standard is suitable for

Good wear resistance and welding resistance

Available for various workpieces such as mild steel

PCD Drill for High

Various counter sinks for

See page 348.

H-Star Endmill [for high speed and high hardness(HRC50~63)] 039

U-Star Endmill [for general cutting(HRC30~55)] 112

G-Star Endmill [for general cutting(HRC10~30)] 196

R+ Endmill [for roughing] 221

S-Star Endmill [for stainless steel] 228

A-Star Endmill [for aluminum] 241

D Endmill [for graphite] 253

Composite Router Endmill [for composite materials] 262

T Endmill [for dental prostheses] 268

PCD Endmill [for non-ferrous metals] 271

Technical information for Endmill

Tool selection guideline by functions ●1 st recommended ◑ 2nd recommended ○Not recommended

Type No. of tooth

- It is recommended to choose the shortest length tool in every application as possible.

Line-up and features

Work- Product No. of Diameter Picture

F •Economical tools for general machining with

Stainless S-Star B •Optimal performance in stainless machining

•Endmill for HRSA machining

Non-ferrous F •Effective chip evacuation in high feed machining