The document discusses CO2 capture plants from Union Engineering. The plants can capture carbon dioxide from gas streams produced by combusting fossil fuels. The capture is done using monoethanolamine (MEA) which reacts with CO2. The CO2-rich gas is then purified to over 99% purity. The electrical system consists of an MCC and control panel to operate and monitor the plant automatically, ensuring continuous operation.
The document discusses CO2 capture plants from Union Engineering. The plants can capture carbon dioxide from gas streams produced by combusting fossil fuels. The capture is done using monoethanolamine (MEA) which reacts with CO2. The CO2-rich gas is then purified to over 99% purity. The electrical system consists of an MCC and control panel to operate and monitor the plant automatically, ensuring continuous operation.
The document discusses CO2 capture plants from Union Engineering. The plants can capture carbon dioxide from gas streams produced by combusting fossil fuels. The capture is done using monoethanolamine (MEA) which reacts with CO2. The CO2-rich gas is then purified to over 99% purity. The electrical system consists of an MCC and control panel to operate and monitor the plant automatically, ensuring continuous operation.
The document discusses CO2 capture plants from Union Engineering. The plants can capture carbon dioxide from gas streams produced by combusting fossil fuels. The capture is done using monoethanolamine (MEA) which reacts with CO2. The CO2-rich gas is then purified to over 99% purity. The electrical system consists of an MCC and control panel to operate and monitor the plant automatically, ensuring continuous operation.
BEVERAGE INDUSTRIAL GASES OIL & GAS Desalination CUSTOMER SERVICE AIRCODIET
CO2 Capture
Plants
CO2 Capture Plants
With capture plants from Union Engineering, solution to a point where the chemical The electrical system for the CO2 generaing carbon dioxide can be captured from any gas reaction that took place in the absorber is plant consists of a combined MCC and control stream based on the combustion of fossil reversed. panel. From the control panel, which com- fuels, including but not limited to coal, heavy Having started as a gas with a low concentra- prises the latest PLC technology, the plant is fuel oilfired steam boilers, and natural gas- tion of carbon dioxide (depending on the type operated and monitored, ensuring easy and fired combustion engines. of fuel used the CO2 will be in the range of continuous trouble-free operation. 3% to 30%), the gas being released from the Moreover, the technology can be used to cap- stripper is a highly concentrated stream con- The plant is started by an automatic start ture carbon dioxide from non-power genera- taining roughly 99% pure carbon dioxide. This sequence and the operation is fully automatic. tion sources, like lime kilns. stream can either be used directly in gaseous The entire process is easily surveyed on the form or be further purified and liquefied to operator panel, showing the status of all The capture plants from Union Engineering meet the strictest requirements for food and drives, readings of all transmitters and alarm are based on the most well-proven absorption beverage grade carbon dioxide in accordance warnings, which will also be indicated by technology currently available on the market, with specifications from regulators like the audible alarm. namely high concentrated monoethanolamine International Society of Beverage Technologists (MEA). MEA is a primary amine that reacts (ISBT). All instruments installed on the skids are wired readily with carbon dioxide. Since the reaction to junction boxes or remote I/O boxes and is purely chemical absorption, it works well Purification column is the final purification tested in our workshop prior to shipment, thus with gas streams having low partial CO2 pres- step, consisting of a distillation column which reducing installation and commissioning time sure, as is the case for flue gases. enables separation/blow-off of non-condens- on site. able gasses, thereby reducing O2 content in Once the carbon dioxide is captured in the the final product to max. 5 ppm (v/v) and The plants are designed for high efficiency, MEA solution it is transferred to a stripping obtaining corresponding CO2 purity of higher availability and reliability through components system. Here it is again released from the MEA than 99.99% (v/v). selected for long life and 24/7 operation. solution by increasing the temperature of the