Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd
Upload
27 views

Pos Fs - Calc Note

This document summarizes the steel design of member 6, a HEA 450 section. It presents the material properties, load combinations, internal forces, buckling parameters, and verification of member capacity, stability, and deflections. The member passes all verification checks for section strength, global stability, bending capacity, and limited displacements under the governing load cases.

Uploaded by

Milos
Copyright
© © All Rights Reserved
Available Formats
Download as RTF, PDF, TXT or read online on Scribd
27 views

Pos Fs - Calc Note

This document summarizes the steel design of member 6, a HEA 450 section. It presents the material properties, load combinations, internal forces, buckling parameters, and verification of member capacity, stability, and deflections. The member passes all verification checks for section strength, global stability, bending capacity, and limited displacements under the governing load cases.

Uploaded by

Milos
Copyright
© © All Rights Reserved
Available Formats
Download as RTF, PDF, TXT or read online on Scribd
You are on page 1/ 2

STEEL DESIGN

---------------------------------------------------------------------------------------------------------------------
-------------------
CODE:      EN 1993-1:2005/A1:2014,    Eurocode 3: Design of steel structures.
ANALYSIS TYPE:      Member Verification
---------------------------------------------------------------------------------------------------------------------
-------------------
CODE GROUP:         
MEMBER:      6    KS_6 POINT:      1 COORDINATE:      x = 0.00 L
= 0.000 m
---------------------------------------------------------------------------------------------------------------------
-------------------
LOADS:
Governing Load Case:      18 ULS /114/    1*1.35 + 2*1.35 + 3*0.75 + 7*0.90 + 9*1.50 + 14*1.50
---------------------------------------------------------------------------------------------------------------------
-------------------
MATERIAL:
S 275    ( S 275 )              fy = 275.00 MPa                   
---------------------------------------------------------------------------------------------------------------------
-------------------

      SECTION PARAMETERS:    HEA 450


h=44.00 cm gM0=1.00 gM1=1.00
b=30.00 cm Ay=138.47 cm2 Az=65.78 cm2 Ax=178.03 cm2
tw=1.15 cm Iy=63721.60 cm4 Iz=9465.33 cm4 Ix=257.00 cm4
tf=2.10 cm Wply=3216.07 cm3 Wplz=965.55 cm3
---------------------------------------------------------------------------------------------------------------------
-------------------
INTERNAL FORCES AND CAPACITIES:
N,Ed = 151.05 kN    My,Ed = -521.94 kN*m
Nc,Rd = 4895.77 kN My,Ed,max = -521.94 kN*m
Nb,Rd = 3700.65 kN My,c,Rd = 884.42 kN*m Vz,Ed = 122.13 kN
MN,y,Rd = 884.42 kN*m Vz,c,Rd = 1044.45
kN
Mb,Rd = 562.89 kN*m
Class of section = 1
---------------------------------------------------------------------------------------------------------------------
-------------------

        LATERAL BUCKLING PARAMETERS:


z = 1.00 Mcr = 619.35 kN*m Curve,LT - b XLT = 0.58
Lcr,low=20.320 m Lam_LT = 1.19 fi,LT = 1.17 XLT,mod = 0.64
---------------------------------------------------------------------------------------------------------------------
-------------------
BUCKLING PARAMETERS:

        About y axis:           About z axis:


Ly = 20.320 m Lam_y = 0.87 Lz = 20.320 m Lam_z = 0.64
Lcr,y = 14.224 m Xy = 0.76 Lcr,z = 4.064 m Xz = 0.82
Lamy = 75.18 kyy = 0.98 Lamz = 55.74 kzy = 0.51
---------------------------------------------------------------------------------------------------------------------
-------------------
VERIFICATION FORMULAS:
Section strength check:
N,Ed/Nc,Rd = 0.03 < 1.00      (6.2.4.(1))
My,Ed/My,c,Rd = 0.59 < 1.00      (6.2.5.(1))
Vz,Ed/Vz,c,Rd = 0.12 < 1.00      (6.2.6.(1))
Global stability check of member:
Lambda,y = 75.18 < Lambda,max = 210.00                    Lambda,z = 55.74 < Lambda,max =
210.00        STABLE
My,Ed,max/Mb,Rd = 0.93 < 1.00      (6.3.2.1.(1))
N,Ed/(Xy*N,Rk/gM1) + kyy*My,Ed,max/(XLT*My,Rk/gM1) = 0.95 < 1.00      (6.3.3.(4))
N,Ed/(Xz*N,Rk/gM1) + kzy*My,Ed,max/(XLT*My,Rk/gM1) = 0.51 < 1.00      (6.3.3.(4))
---------------------------------------------------------------------------------------------------------------------
-------------------
LIMIT DISPLACEMENTS

      Deflections    (LOCAL SYSTEM):    Not analyzed

      Displacements (GLOBAL SYSTEM):   


vx = 9.42 mm    <    vx max = L/150.00 = 135.47 mm Verified
Governing Load Case:      21 SLS /83/    1*1.00 + 2*1.00 + 5*0.50 + 6*0.60 + 8*1.00 + 13*1.00
vy = 13.19 mm    <    vy max = L/150.00 = 135.47 mm Verified
Governing Load Case:      21 SLS /149/    1*1.00 + 2*1.00 + 3*0.50 + 6*0.60 + 8*1.00 +
16*1.00
---------------------------------------------------------------------------------------------------------------------
-------------------
Section OK !!!

You might also like