This document provides instructions for using a dual-component epoxy putty for repairs. The epoxy putty can be used to fill cracks, holes, and screw holes in materials like stone, wood, steel, and synthetics. It cures quickly within 5-10 minutes, is water and chemical resistant, and adheres strongly once fully cured after 24 hours. The epoxy putty should be kneaded together until it reaches a uniform gray color and then applied within 2 minutes before shaping and smoothing with a damp tool.
This document provides instructions for using a dual-component epoxy putty for repairs. The epoxy putty can be used to fill cracks, holes, and screw holes in materials like stone, wood, steel, and synthetics. It cures quickly within 5-10 minutes, is water and chemical resistant, and adheres strongly once fully cured after 24 hours. The epoxy putty should be kneaded together until it reaches a uniform gray color and then applied within 2 minutes before shaping and smoothing with a damp tool.
This document provides instructions for using a dual-component epoxy putty for repairs. The epoxy putty can be used to fill cracks, holes, and screw holes in materials like stone, wood, steel, and synthetics. It cures quickly within 5-10 minutes, is water and chemical resistant, and adheres strongly once fully cured after 24 hours. The epoxy putty should be kneaded together until it reaches a uniform gray color and then applied within 2 minutes before shaping and smoothing with a damp tool.
This document provides instructions for using a dual-component epoxy putty for repairs. The epoxy putty can be used to fill cracks, holes, and screw holes in materials like stone, wood, steel, and synthetics. It cures quickly within 5-10 minutes, is water and chemical resistant, and adheres strongly once fully cured after 24 hours. The epoxy putty should be kneaded together until it reaches a uniform gray color and then applied within 2 minutes before shaping and smoothing with a damp tool.
6305569 - BISON EPOXY REPAIR UNIVERSAL BLISTER 56 G MULTI LANGUAGE
EPOXY REPAIR UNIVERSAL
ROCK SOLID DUAL-COMPONENT EPOXY PUTTY
APPLICATION Directions for use: Cut the required Epoxy Repair with a damp knife from the rod (reinsert foil). Knead with your fingers until a homogeneous colour (dark gray) is obtained. If kneading is difficult, bring the rod at room temperature. Apply within 2 minutes after mixing and put into shape. Cut off excess mass with a knife. Remove fingerprints by rubbing with water or a damp cloth before curing starts. Stains/residue: Remove fingerprints by rubbing with water or a damp cloth before curing starts.
TECHNICAL SPECIFICATIONS Chemical base: Epoxy resin Chemicals resistance: Water, oil, grease, solvents, diluted acids and alkalis Colour after curing/drying: Grey Consistency: Solid putty Density approx.: 2,18 g/cm³ Filling capacity: Very good Final bond strength (Alu): 6 N/mm² Final bond strength after: 24 hours PRODUCT DESCRIPTION Dual-component epoxy putty for 1001 permanent repairs and Handling time: 1 hour restorations. Minimum application 10 °C temperature: FIELD OF APPLICATION For 1001 repairs in and around the home, car, boat and Minimum temperature -30 °C caravan, machines and tools. Fill cracks and holes in stone, resistance: wood, steel, and many synthetics. Tip: Can also be used as a Maximum temperature 120 °C mouldable plug to fill screw holes. resistance: Not suitable for PE (polyethylene), PP (polypropylene) and PTFE Moisture resistance: Very good PROPERTIES Paintability: Yes · Fast curing: 5-10 minutes · Easy to apply Potlife: 5 minutes · Can be used indoors and outdoors Solvent free: Yes · Water resistant: suitable for continuous water exposure · Even cures under water! UV resistance: Very good · Does not deform Water resistance: Good · No shrinkage: remains in original form · Chemical resistant Water soluble: No · Grinding, drilling, sawing and painting possible after curing STORAGE CONDITIONS PREPARATION At least 24 months after date of manufacture. Working Conditions: Recommended application at temperatures Limited shelf life after opening. between +15 °C and +25 °C. Store in a dry, cool and frost free place. Personal safety: Preferably, process with gloves. After use, wash hands immediately and thoroughly with soap and water. Preliminary Surface Treatment: The surface must be properly sanded and then cleaned and degreased. Tools: A moist knife to cut off the required amount from the stick.
Our advice is based on extensive research and practical experience. However, in view of the large variety of materials and the conditions under which our products are applied, we assume no responsibility for the results obtained and/or any damage caused by the use of the product. Nevertheless, our Service Department is always at your disposal for any advice needed. Bison International B.V. - P.O. Box 160 - NL 4460 AD Goes www.bison.net 1 20220926
