This technical data sheet provides product information for KILZ 2 ALL-PURPOSE Primer, a fast drying, water-based primer-sealer-stainblocker. It can be used on a variety of interior and exterior surfaces and blocks many common stains. The document outlines specifications, surface preparation instructions, application methods, and other details.
This technical data sheet provides product information for KILZ 2 ALL-PURPOSE Primer, a fast drying, water-based primer-sealer-stainblocker. It can be used on a variety of interior and exterior surfaces and blocks many common stains. The document outlines specifications, surface preparation instructions, application methods, and other details.
This technical data sheet provides product information for KILZ 2 ALL-PURPOSE Primer, a fast drying, water-based primer-sealer-stainblocker. It can be used on a variety of interior and exterior surfaces and blocks many common stains. The document outlines specifications, surface preparation instructions, application methods, and other details.
This technical data sheet provides product information for KILZ 2 ALL-PURPOSE Primer, a fast drying, water-based primer-sealer-stainblocker. It can be used on a variety of interior and exterior surfaces and blocks many common stains. The document outlines specifications, surface preparation instructions, application methods, and other details.
PRODUCT INFORMATION KILZ 2® ALL-PURPOSE Primer is a fast drying, water-based, multi-surface primer-sealer-stainblocker with excellent adhesion, COMPLIES WITH THE BELOW AS OF 1/1/2019 mildew resistance, sealing properties and very mild odor. KILZ 2 ALL-PURPOSE Primer blocks medium stains including minor SCAQMD YES LEED† YES water stains, rust, grease, ink, pencil and felt marker. Enhanced hiding makes it ideal for changing colors and helps lessen the CARB YES MPI# 6 number of coats of paint required. Use under or over water-based or oil-based paints. Not recommended on flooring. OTC YES GREENGUARD YES RECOMMENDED USES: LADCO YES CHPS YES Use on properly prepared interior and exterior surfaces, such as: AIM YES NAHB/ICC NGBS YES • Wood • Stucco • Paneling • Drywall • Brick † Please see www.usgbc.org/LEED for additional details. • Painted Metal • Plaster • Masonry • Galvanized Metal
Tint Bases/Max Tint Load: The surface must be clean, free of dust, grease, wax, peeling Clean all tools and equipment with clean water. For disposal No. 2000 128 oz / 2 oz paint, mold, mildew and wallpaper paste. If washing is of empty containers and unused product, contact your necessary, use a non-soapy detergent or a TSP substitute. household refuse collection service. Sheen: < 10.0 @ 85° Rinse well and allow to dry. Sheen levels depend on porsosity and various surface irregularities. Peeling or Checked Paint: Scrape off loose paint and sand CAUTIONS/LIMITATIONS: to a smooth surface. Sanding or removal of paint containing Resin Type: Acrylic Polymer • Protect from freezing. lead is hazardous.* Weight per Gallon: 11.0 lbs • For best results, apply at temperatures between Unpainted, exterior wood: Exposed to sun and/or % Solids by Volume: 33% 50°F – 90°F. Temperatures above 90°F may affect the moisture longer than 2 – 4 weeks must be cleaned and application such as drying too fast. Avoid painting in direct % Solids by Weight: 48.5% sanded before priming.* sun. VOC: < 50 g/L Glossy Surfaces: For maximum adhesion, scuff sand the • Shelf life under normal conditions is 2 years unopened. surface thoroughly before priming. Flash Point: N/A • Partially used cans might develop skinning if not tightly Masonry, Brick, Stucco and Plaster: KILZ 2 ALL-PURPOSE Viscosity: 95 – 105 KU sealed. Interior & Exterior Water-Base Primer may be used on Recommended Film Thickness: clean, dry, aged masonry surfaces. New masonry must be Wet: 5.3 mils / Dry: 1.7 mils @ 300 sq ft/gal allowed to cure (dry) at least 30 days before applying KILZ 2 GENERAL INFORMATION: Wet: 4.0 mils / Dry: 1.3 mils @ 400 sq ft/gal ALL-PURPOSE Primer. Coverage: 300 – 400 sq ft/gal depending on the surface Fire Restoration: It is critical to clean smoke WARNING texture, porosity and application method. Does not include damaged surfaces thoroughly before priming. Primer Cancer and Reproductive Harm– www.P65Warnings.ca.gov the loss of material from spraying. recommendations: Water based primers such as KILZ CAUTION IRRITANT Avoid contact with eyes. May cause eye, RESTORATION™ or oil based primers such as KILZ® ORIGINAL nose and throat irritation. Avoid breathing of dust, vapors APPLICATION: (interior use) or KILZ ORIGINAL INTERIOR/EXTERIOR. or spray mist. Open windows and doors or use other means to ensure fresh air entry during application and drying. If Brush: Nylon / Polyester *WARNING! If you scrape, sand or remove old paint, you you experience eye watering, headache or dizziness or if may release lead dust. LEAD IS TOXIC. Contact the National Roller: 3/8" – 3/4" nap air monitoring demonstrates vapor/ mist levels are above Lead Information Center at 1-800-424-LEAD or log on to applicable limits, wear an appropriate, properly fitted Airless Spray: Fluid pressure of 1,800 – 3,000 psi www.epa.gov/lead. respirator (NIOSH / MSHA TC -23C or equivalent) during Tip: .015" – .021" and after application. Follow respirator manufacturer’s Filter: 60 mesh TEST SPECIFICATIONS: directions for respirator use. Close container after each use. Flexibility Wash thoroughly after handling and before smoking or Thinning: Not recommended. Product is formulated for use ASTM D522 - Pass eating. at package consistency only. Dry Time: @ 77°F, 50% RH Biological Growth FIRST AID: If swallowed, do not induce vomiting. Get Longer dry time required in cooler temperatures and in ASTM D3274 - Pass medical attention immediately. If you experience difficulty higher humidity. in breathing, leave the area to obtain fresh air. If continued To Touch: 30 Minutes difficulty is experienced, get medical attention immediately. To Recoat: 1 hour In case of eye contact, flush eyes immediately with plenty of water for at least 15 minutes and get medical attention.
