MAPESIL AC

Pure, mould-resistant, acetic, silicone sealant

available in 40 colours and transparent

WHERE TO USE
Mapesil AC is an acetic-crosslinking silicone sealant suitable for sealing glass, ceramic, and anodised aluminum. After first
having used a bonding enhancer, Primer FD can also be used on concrete, wood, metal, painted surfaces, plastic and
rubber.
Mapesil AC is used for:
· Sealing expansion joints of ± 25% expansion of the initial size, according to the stanrdard EN 15651.
· Forming a perfectly elastic gasket between different elements in the building, mechanical engineering, shipbuilding,
automobile, manufacturing, etc.

Some application examples

· Sealing joints in wall and floor coverings of ceramic and cement, provided they are not subject to heavy abrasion.
· Sealing joints between sinks or sanitary ware and ceramic tiles in kitchens, bathrooms and showers with colours
coordinated with the grouts.
· Sealing expansion joints in swimming pools.
· Assembling compositions of glass tiles and artistic stained glass windows.
· Sealing glazing, door, and window frames portholes, windows, and glass.
· Sealing air ducts, and water pipes.
· Sealing tanks, service pipes, and boilers.
· Sealing of joints subject to high chemical and thermal stress.
· Sealing materials of different thermal exposure coefficients.

TECHNICAL CHARACTERISTICS
Mapesil AC is a one-component, acetic crosslinking, solvent-free silicone sealant, available coloured or transparent. It is a
thixotropic paste which is easily trowellable both horizontally and vertically. It crosslinks following exposure to
atmospheric humidity at ambient temperatures, and forms an elastic product with following properties:
excellent durability. Seals remain unchanged even after many years exposure to climatic extremes, industrial pollution,
sudden temperature changes and immersion in water;
· high elasticity;
· excellent bonding to glass, ceramic and anodised aluminium;
· mildew resistant;
· waterproof and permeable to vapour;
· resistant to chemical agents;
· flexible down to -40°C and resistant to temperatures at +180°C;
· easily workable;
· in compliance with ISO 11600 norm, it is classified as F-25-LM.
· in compliance with EN 15651-1, EN 15651-2, EN 15651-3 and CE-marking
· in compliance with numerous international standards.

RECOMMENDATIONS
· Do not use Mapesil AC for joints in exterior between ceramic tiles and light-coloured natural stone because dirt could
accumulate by the joints. In such cases, please contact Mapei Technical Service to identify the most suitable solution.
· For sealing surfaces sensitive to acids such as limestone, use a neutral silicone sealant (e.g. Mapesil LM).
· The use of Mapesil AC is not recommended on highly plasticised material or on bituminous surfaces because of the
release of substances that reduce bonding and penetrate into the sealant, altering the colour and resistance.
· The resistance of Mapesil AC to chemical agents is generally excellent; however, due to the numerous products and
working conditions to which Mapesil AC can be applied, it is always advisable to do a sample test in cases of doubt.
· Do not use Mapesil AC to seal aquariums.
· For sealing floor joints subject to heavy traffic, use a polyurethane (e.g. Mapeflex PU 45 FT) or epoxy-polyurethane (e.g.
Mapeflex E-PU 21 SL) sealant.

APPLICATION PROCEDURE
Preparing and calculating joints size
All the surfaces to receive the sealant must be dry, solid, and free from dust and loose particles, oils, grease, wax, old paint,
and rust.
In order that the seal can carry out its function, provision must be made for it to elongate and compress freely.
During application, it is, therefore, necessary that:
· it adheres only to the side of the walls of the joint and not to the base of the joint;
· the joint is sized so that the estimated maximum extension is not greater than 25% of the initial width (calculated at
+20°C);
· when the width of the joint is 10 mm, the thickness must be equal to the width; for widths between 11 and 20 mm the
thickness must always be equal to 10 mm; for widths greater than the thickness must be equal to half the width.
To control the depth of the joint and to prevent Mapesil AC from adhering to the base, the bottom of the joint should be
filled with a sized Mapefoam, a polyethylene cord.

Application of Primer FD
Where the use of Primer FD is necessary, it must be applied with a small brush onto the appropriate areas of the joints
and left to dry for several minutes to allow the solvent to evaporate. Then apply Mapesil AC.

Application of Mapesil AC
Mapesil AC is packed in cartridges of 310 ml; to use, cut the cartridge above the end of the thread and screw on the nozzle,
which should be cut at 45° to produce a hole corresponding to the size of the joint. Insert the cartridge into the gun and
extrude the sealant.
The surface of Mapesil AC must be finished off with a tool moistened with soapy water before a superficial film has
formed.

Crosslinking
When exposed to air and humidity, Mapesil AC crosslinks and becomes elastic. The speed at which Mapesil AC crosslinks
depends only slightly on temperature, but is fundamentally linked to humidity in the atmosphere.
The graph A shows the cross linking at +23°C and 50% humidity in the atmosphere.
 Cutting the nozzle according to the
size of the joints Application of Primer FD  Application of Mapesil AC

Smoothing the joint with soapy water Sealing ceramic tile floor with
and a small brush  Mapesil AC Sealing sanitary ware

Sealing aluminium window frame

Sealing U-profile glass  with Mapesil AC

CLEANING
Traces of unpolymerised Mapesil AC may be removed with common solvents (ethyl acetate, petrol, toluene); after
complete cross-linking, the silicone rubber may only be removed mechanically. Avoid contact between Mapesil AC not
yet polymerised and any type of solvent, to avoid delays or inhibition of the final hardening process.

CONSUMPTION
Mapesil AC:
Consumption of Mapesil AC varies depending on the width of the joints. Some examples of consumption for end joints
and triangular joints are shown in the chart.
Primer FD:
100 g/m².
 CONSUMPTION TABLE
(linear metres per cartridge)
END JOINT

Joint size Linear metres

in mm (a x b) per cartridge
5x5 12
10x5 6
10x10 3
15x10 2
20x10 1.5
25x10 1.25
30x15 0.7
40x20 0.4

TRIANGULAR JOINT

Joint size Linear metres

in mm (l1 x l2) per cartridge
5x5 25
10x10 6
10x15 3
10x20 1.5

PACKAGING
Mapesil AC: 310 ml cartridges.
Primer FD:
0.9 kg and 0.2 kg bottles.

COLOURS
Mapesil AC is available in 40 colours from the “MAPEI COLOURED GROUTS” range plus transparent.
 STORAGE
Mapesil AC can be stored 24 months in a dry cool place in original cartridges.
Primer FD, when stored in a cool and dry place (at a temperature not higher than +25°C) has a storage life of 6 months.

SAFETY INSTRUCTIONS FOR PREPARATION AND APPLICATION

Mapesil AC is not considered dangerous according to current norms regarding the classification of mixtures. During use,
wear protective gloves and goggles and take the usual precautions for handling chemicals.
For further and complete information about the safe use of our product please refer to the latest version of our Material
Safety Data Sheet.
PRODUCT FOR PROFESSIONAL USE.
Primer FD is easily inflammable. It is recommended storing it away from naked flames and sparks, to avoid smoking, to
prevent the build up of electrostatic energy and to work in well ventilated areas.
Furthermore, it is irritant for the eyes and skin, it may cause drowsiness and dizziness, it is harmful if swallowed or inhaled,
and it may cause irreversible damage if used for lengthy periods.
During use, wear protective gloves to prevent dry, chapped skin, and protective gloves, and take the usual precautions for
handling chemicals.
If the product comes in contact with the eyes or skin, wash immediately with plenty of clean water and seek medical
attention. Wear a suitable device to protect the respiratory system. Do not use in presence of pregnant women.
For further and complete information about the safe use of our product please refer to the latest version of our Material
Safety Data Sheet.
PRODUCT FOR PROFESSIONAL USE.

TECHNICAL DATA (typical values)

In compliance with: 
EN 15651-1
EN 15651-2
EN 15651-3

PRODUCT IDENTITY
Type: thixotropic paste
Colour: transparent + 40 colours
Density (g/cm³): 1.03 (transparent colour)
Dry solids content (%): 100
EMICODE: EC1 Plus - very low emission

APPLICATION DATA (at +23°C and 50% R.H.)

Application temperature range: from +5°C to +50°C
Extrusion speed from a 3.5 mm nozzle at a pressure of 0.5 120
N/mm² (g/minute):
Time for formation of skin (minutes): 10
Shrinkage during vulcanisation (%): 3.5
Speed of vulcanisation (mm): 4 in 1 day - 10 in 7 days

FINAL PERFORMANCES
EN 15651-1: sealant for façade joints in interior and F-EXT-INT-CC
exterior, even with cold temperature:
Class: 25 LM
EN 15651-2: sealant for glazing, even with cold G-CC
temperature:
Class: G 25 LM
EN 15651-3: sealant for sanitary fittings: S
Class: XS 1
Tensile strength – according to ISO 37 (N/mm²): 1.6
Elongation at breaking point – according to ISO 37 (%): 800
 Tear strength (ISO 34-1, Die C) (N/mm): 4
Shore-A-Hardness (ISO 868): 20
Density at +25°C (ISO 1183-1 A) (g/cm³): 1.02
Modulus of elongation measured according to ISO 8339
METHOD A (N/mm²):
– at 25% elongation: 0.20
– at 50% elongation: 0.27
– at 100% elongation: 0.35
Maximum movement allowed (%): 25
Resistance to water: excellent
Resistance to ageing: excellent
Resistance to atmospheric agents: excellent
Resistance to chemical agents, acids and dilute alkali: good
Resistance to soap and detergents: excellent
Resistance to solvents: limited
Resistance to temperature: from –40°C to +180°C

WARNING
Although the technical details and recommendations contained in this product data sheet correspond to the best of our
knowledge and experience, all the above information must, in every case, be taken as merely indicative and subject to
confirmation after long-term practical application; for this reason, anyone who intends to use the product must ensure
beforehand that it is suitable for the envisaged application. In every case, the user alone is fully responsible for any
consequences deriving from the use of the product.
Please refer to the current version of the Technical Data Sheet, available from our website www.mapei.com

LEGAL NOTICE
The contents of this Technical Data Sheet (“TDS”) may be copied into another project-related document, but the
resulting document shall not supplement or replace requirements per the TDS in force at the time of the MAPEI product
installation.
The most up-to-date TDS can be downloaded from our website www.mapei.com.
ANY ALTERATION TO THE WORDING OR REQUIREMENTS CONTAINED OR DERIVED FROM THIS TDS EXCLUDES THE
RESPONSIBILITY OF MAPEI.

Mapesil AC

100 WHITE

103 MOON WHITE

111 SILVER GREY

123 ANCIENT WHITE

112 MEDIUM GREY

113 CEMENT GREY

114 ANTHRACITE

127 ARCTIC GREY

110 MANHATTAN 2000

187 LINEN
176 GREEN-GREY

174 TORNADO

125 CASTLE GREY

119 LONDON GREY

163 LIGHT LILAC

168 CERULEAN

167 AVIO

169 STEEL BLUE

172 SPACE BLUE

177 SAGE

130 JASMINE

131 VANILLA

137 CARIBBEAN

132 BEIGE 2000

138 ALMOND

141 CARAMEL

142 BROWN

189 SPELT

133 SAND

134 SILK

188 BISCUIT

135 GOLDEN DUST

152 BROWN

144 CHOCOLATE

149 VOLCANO SAND

145 TERRA DI SIENA

143 TERRACOTTA
 136 MUD

120 BLACK

150 YELLOW

999 TRANSPARENT

N.B.: Due to the printing processes involved, the colours should be taken as merely indicative of the shades of the actual
product

401-5-2022-en (IT)

. Any reproduction of texts, photos and illustrations published here is prohibited and subject to .
prosecution