Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 22 views

    XEC 12 VDC Electric Actuators For Choke Valves

    Uploaded by

    peng chaowen

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    XEC 12 VDC Electric Actuators For Choke Valves

    Uploaded by

    peng chaowen
    22 views2 pages

    Original Title

    XEC 12 VDC Electric Actuators for Choke Valves

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    22 views2 pages

    XEC 12 VDC Electric Actuators For Choke Valves

    Uploaded by

    peng chaowen

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 2

    XEC Series

    XEC Series Actuators


    12 VDC Electric Actuators for Choke Valves

    The Triac® XEC Series electric actuators

    12 VDC Electric Actuators for Choke Valves


    come complete with a choke valve
    control circuit board. The circuit board
    is equipped with a torque limiting feature
    to prevent damage to gear train. There is
    an alarm circuit to indicate a “jammed”
    choke. The motor is reversible. The motor
    and torque limiting feature ensure long
    operating life. Actuators include mechanical
    travel stops and limit switches to indicate
    fully opened or closed position.

    The Triac® XEC Series electric actuators for


    choke valves are the preferred choice when
    long life 12VDC actuation is required.

    • 12VDC power supply


    • 70% Duty Cycle motor • Ambient temperatures: -4°F to 158°F
    • Two ¾” conduit entries • Optional low temperature -40°F
    • Class F motor insulation • Declutchable Manual Override (10 turns
    • 4 Internal Switches (2-Indication; for 90°)
    2-Motor Control) • External adjustable travel stops
    • Electronic Over-torque Limiter • Self-locking, double reduction worm gear
    • Pulse control signal to relays assembly with minimal back lash
    • Low power consumption when not in • Anodized & polyester powder coated
    operation enclosure

    The XEC Series is our standard recommendation for use with choke valves.
    Please see our full product line of electric actuators for applications with other
    requirements.
    »» XE Series 12 VDC should be used instead for cases where the customer is
    using a valve controller (such as TotalFlow by ABB®).
    »» XC Series (XC-00690B) is available for applications that are required to meet
    CSA Approved Class I, Division 1 & 2, Groups C, D standards. Motor control
    C US
    258948
    board is not available in CSA model.
    262375

    9955 International Blvd. PHONE (513) 247-5465


    Cincinnati, Ohio 45246 FAX (513) 247-5462
    www.atcontrols.com sales@atcontrols.com
    XEC Series 12 VDC Electric Actuators for Choke Valves

    Wiring Diagram

    SE1337 (for XEC-690B) The XEC Series is our standard


    recommendation for use with
    choke valves. Please see our full
    NO CONTACT - OPEN POSITION product line of electric actuators
    AUXILIARY COMMON - CLOSED / OPEN POSITION
    for applications with other
    LIMIT SWITCHES
    MAX 250VAC 16A requirements.
    NO CONTACT - CLOSE POSITION
    »» XE Series 12 VDC should be
    17
    used instead for cases where
    16
    15
    14
    13
    12
    11
    the customer is using a valve
    controller (such as TotalFlow
    Made

    in

    USA

    PWR
    by ABB®).
    »» XC Series (XC-00690B) is
    TB1

    12VDC 1
    POWER
    2
    available for applications that
    3
    4 TRIAC
    are required to meet CSA
    approved standards: Class I,
    TM-12VDC-AMP

    5
    TRIP CONTACT
    CLOSE ON TRIP 6
    Division 1 & 2, Groups C, D.
    TRIP

    P1

    TRIP
    Motor control board is not
    US available in CSA model.
    1. CONNECT 12VDC (BATTERY SOURCE) TO TERMINALS 1 & 2.
    POSITIVE ON TERM 1 / NEGATIVE ON TERM 2 - ACTUATOR WILL DRIVE CW C
    POSITIVE ON TERM 2 / NEGATIVE ON TERM 1 - ACTUATOR WILL DRIVE CCW 258948
    262375
    2. IF TRIP SETTING NEED AJUSTMENT AFTER VALVE ASSEMBLY HAS BEEN INSTALLED IN THE FIELD
    TURN THE TRIP POTENIOMETER CCW UNTIL IT STOPS.
    WHILE THE ACTUATOR IS MOVING TURN THE TRIP POTENTIOMETER CW UNTIL THE TRIP RED LED GOES OUT. JOG THE ACTUATOR BACK AND FORTH
    MAKING SURE THE TRIP LED STAYS TURNED OFF.

    3. CONNECT PLC DISCRETE INPUT TO TERMINALS 5 & 6. PLC LOGIC SHOULD DE-ENERGIZE ACTUATOR OR REVERSE ACTUATOR TO CLEAR VALVE JAM. THE
    TM-12VDC-AMP CIRCUIT BOARD DOES NOT CONTROL THE ACTUATOR, ONLY COMMUNICATES WHEN THE ACTUATOR MOTOR HAS STALLED.

    Dimensions (IN)
    Model ISO 5211 A B C D sq E F G H I J K L M N O P Q X Y Z
    XEC-690B* F07 M8 0.47 2.756 0.669 3.46 0.12 1.26 1.97 6.18 2.01 3.94 2.76 6.57 2.09 1.57 2.36 4.72 10.16 6.69 9.25

    Output Torque Amps *Use model number XC-00690B when


    Model CSA explosion proof rating is required.
    In-Lbs 12VDC
    XEC-690B* 690 13.5 FLA
    9955 International Blvd.
    Cincinnati, Ohio 45246
    PHONE (513) 247-5465
    XEC12VDC-20181031 FAX (513) 247-5462
    Copyright 2013 A-T Controls, Inc. sales@atcontrols.com
    LIT0036 www.atcontrols.com

    You might also like