Manual Handling Risk Assessment
Manual Handling Risk Assessment
Manual Handling Risk Assessment
MANUAL HANDLING
RISK ASSESSMENT PACKAGE
May 2015
(original doc. January 2003)
TABLE OF CONTENTS
1. INTRODUCTION......................................................................3
2
1. Introduction
Likelihood Severity
1 = Improbable 1 = Low (minimal effect)
2 = Possible 2 = Medium (injuries may require 3 days absence)
3 = Probable 3 = High (longer periods of absence or
hospitalisation)
Risk score (Risk = likelihood x severity)
1 very low risk (no action required)
2 low risk (non-urgent action required)
3 medium risk (deal with as soon as possible)
4 fairly high risk (deal with urgently)
6 high risk (deal with immediately)
9 very high risk (stop practice until control measures in place)
3
So for example a possible risk (2) of a medium severity injury requiring 3 days
away from work (2) would be classified as 2x2 = 4 – a fairly high risk – deal
with urgently.
The following pages contain formats for the documents listed below. For
electronic copies please e-mail david.graeme@kent.gov.uk, or download from:
http://www.kelsi.org.uk/policies-and-guidance/health-and-safety-guidance/
moving-and-handling
4
CONFIDENTIAL
Name of School
Name of person responsible for maintaining
register
Staff member Job Title Requires individual Date of last Manual Date of planned Manual
risk assessment Handling Training Handling Training
yes/no
5
Register of staff members at risk of Manual Handling Injury (continued)
Staff member Job Title Requires individual Date of last Manual Date of planned Manual
risk assessment Handling Training Handling Training
yes/no
6
REGISTER OF MOVING AND HANDLING EQUIPMENT
Name of School
Name of person responsible for maintaining
register
Manufacturer
General use or individual Date of last
Type of equipment (model, serial no. if Issued by: Service contract
student (name) service
app) yes/no
7
Register of Moving and Handling Equipment (continued)
Manufacturer General use or
Usual site of Date of last
Type of equipment (model, serial no. if Issued by: individual student
equipment service
app) (name)
8
9
GENERIC RISK ASSESSMENT
Name of School
Address of school
The generic risk assessment for manual handling is designed to identify manual handling hazards in the workplace and quantify the
associated risks. Information is gathered in the first sections in order to select reasonably practicable and appropriate control
measures – which are then listed in the action plan. The questions posed are not an exhaustive list – each assessor should
include factors which may be particular to their own workplace. In cases where the required action may take some time to fund
and implement it may be necessary to also specify short-term control measures in order to reduce risks to acceptable levels. The
assessment follows the TILE(E) formula:
T(asks): All moving and handling tasks of animate or inanimate loads within the school or
office.
I(ndividual The levels of staff expertise and training (techniques and equipment) and the
capabilities): requirement for individual assessments. Cross-refer with the register of staff at
risk from manual handling at work.
L(oads): The particular needs of the student group and the level of object handling required.
E(nvironment): Constraints due to environmental features or available space.
E(quipment) The quantity and suitability of current moving and handling equipment. Cross
refer with the register of Manual Handling Equipment
Some information may be duplicated between the generic risk assessment and individual student or staff member assessments. In
such cases cross-reference should be made between the documents.
Additional notes:
Are areas of the school liable to be cluttered with obstacles that prevent
easy access?
Are there any areas where steps or stairs give rise to manual handling
risks?
Are there currently any plans for alterations to the school building in yes already yes as part of the
order improve accessibility for all students to the whole school underway accessibility plan no
curriculum? (circle)
Give additional details, e.g. where there are several relevant bathroom/toilet areas
Is equipment available in all situations – e.g. all areas of the school used by
students and on school trips or regular visits to community sites (e.g.
swimming pools)
Does all mechanical lifting equipment have six monthly servicing and
maintenance?
Additional notes:
The action plan should contain details of control measures to bring the risks identified in the previous pages down to acceptable
levels. There may be a range of potential measures – both short term and long term. To demonstrate that a control measure is the
most reasonably practicable it may be useful to give details of other strategies and the reasons why they have been rejected.
For example an identified risk may be assisting the transfer of a dependent student to the toilet in a small cubicle. Short-term
measures may be to use alternative facilities in another part of the school that can accommodate a mobile hoist, although the
distance travelled may cause difficulties with getting to classes on time. An appropriate long-term measure might be to restructure
and enlarge the existing area and put in an overhead hoist. The overhead hoist may be more expensive than sharing the mobile
hoist, but allows most efficient use of the available room and reduces pulling/pushing stress for the staff member.
Potential control
measures for
Consideration (in
no particular
order):
Equipment
Provision
15 Generic risk assessment
name of School:
Maintenance
Cleaning
Training
On-site/central
courses
Supervision
Measure of
competence
Guidelines
Student careplans
Individual staff
assessments
Guidelines for
inanimate load
handling
E
Q
U
I
P
M
E
N
T
T
R
A
I
N
I
N
G
G
U
I
D
E
L
I
N
E
S
O
T
H
E
R
Steps/stairs
(include fire
evacuation)
Transfers to
toilet or
shower chair
Use of comm.
facilities
swim, ride
Up and down
from the floor
Use of equip:
trikes
standing
frame etc.
Assisted
changing for
PE
Rolling onto
side or onto
tummy
Access to
vehicles plus
restraint
systems
Handling tasks that entail significant manual handling risks at the present time
with alternative strategies (e.g. not to carry out these tasks, or use other method)