ELECTRICAL ACCESSORIES

GI CONDUITS & ACCESSORIES

 NC?minal , Maximum distance between supports SPACING OF SUPPORTS FOR CONDUITS
size or , ____________________
conduit Imm) : Horizontal runs (ml Vertical runs (ml The following table provides guidance on the support spacing for conduits.

16 0.75 1.0 • This table is based on the 16th edition of the I.E.E Wiring Regulations Appendix II.
• These tables are for guidance only and account needs to be taken of future wiring needs.
I I I I
'-------�----------- ➔---------J
� __ !�-�5- __:_____1�7� ____ � ____�� ___ �
: 26-40 : 2.0 : 2.25 :

■
i : :�v�r:4� : ::: : : : :2:2�: : : : 1 : : : : �� : : : }
CONDUIT DIAMETER (MM)
16 20 25 32 16 20 25 32 16 20 25 32 16 20 25 32 16 20 25 32
STRAIGHT ONE BEND TWO BENDS THREE BENDS FOUR BENDS

188 303 543 947 177 286 514 900 158 256 463 818 130 213 388 629
- ------ --------------------------------------------------------- -

1.5
- ------ COVERED BY 182 294 528 923 167 270 487 857 143
--------------------------------------------------------- -
233 422 750 111 182 333 600
2 TABLES 1 & 2 177 286 514 900 158 256 463 818 130 213 388 692 97 159 292 529 -
- ------ ---------------------------------------------------------
2.5
- ------
171 278 500 878 150 244 442 783 120 196 358 643 86 141 260 474 -
---------------------------------------------------------
3 167 270 487 857 143 233 422 750 111 182 333 600
- ----------------------------------------------------------------------------- -
3.5 179 290 521 911 162 263 475 837 136 222 404 720 103 169 311 563
- ----------------------------------------------------------------------------- -
4 177 286 514 900 158 256 463 818 130
- ----------------------------------------------------------------------------- -
213 388 692 97 159 292 529
4.5 174 282 507 889 154 250 452 800 125 204 373 667 91 149 275 600
- ----------------------------------------------------------------------------- -

5 171 278 500 878 150 244 442 783 120

- ----------------------------------------------------------------------------- -
196 358 643 86 141 260 474
6 167 270 487 857 143 233 422 750 120 182 333 600
- ----------------------------------------------------------------------------- -

7 162 263 475 837 136 222 404 720 111

- ----------------------------------------------------------------------------- -
160 311 583
8 158 256 463 818 130 213 388 692 97
- ----------------------------------------------------------------------------- -
150 292 529
9 154 250 452 800 125 204 373 667 91 149 275 500
- ----------------------------------------------------------------------------- -
10 150 244 442 783 120 196 358 643 86 141 260 474

GI CONDUIT 854568: PART 1: 1970 (CLASS 3)

• Pre Galvanised Steel Conduit complying to BS4568.
• Class 3 protection on the interior and exterior of conduit surface. Class 3 Protection
• Supplied with one coupler and threaded at both ends.
Outside

• Heavy Gauge Metric size threaded.

• Standard Length: 3.75m.
• Suitable for indoor and semi-indoor installation.
Class 3 Protection
•Applications: For Electrical wiring. inside

HEAVY GAUGE
Product code Nominal Size Outside Diameter (mm) Length (meters) Nominal Wall Length of Threads (mm) P im
b J{Y
Min Max thickness Min Max Wes{
RR-1020-l .6H-C3 20 mm 19.7mm 20.0mm 3.75 1.6 ± 0.15 13.0mm 15.0mm 10
RR-1025-l .6H-C3 25 mm 24.6mm 25.0mm 3.75 1.6 ± 0.15 16.0mm 18.0mm 10
RR-1032-l .6H-C3 32 mm 31.6mm 32.0mm 3.75 1.6 ± 0.15 18.0mm 20.0mm 10
RR-1040-l .8H-C3 40 mm 39.6mm 40.0mm 3.75 1.8 ± 0.15 19.0mm 22.0mm 3
RR-1050-l .8H-C3 50 mm 49.6mm 50.0mm 3.75 1.8 ± 0.15 19.0mm 22.0mm 3

LIGHT GAUGE
Product code Nominal Size Outside Diameter Imm) Length (meters) Nominal Wall Length of Threads Imm) P
b�:;13t'J
Min Max thickness Min Max (Pcs)
RR-1020-l .2L-C3 20 mm 19.7mm 20.0mm 3.75 1.2 ± 0.15 13.0mm 15.0mm 10
RR-1025-l .2L-C3 25 mm 24.6mm 25.0mm 3.75 1.2 ± 0.15 16.0mm 18.0mm 10
RR-1032-l .2L-C3 32 mm 31.6mm 32.0mm 3.75 1.2 ± 0.15 18.0mm 20.0mm 10
LOOPING IN BOXES
STEEL MEDIUM - 1 KNOCKOUT

CODE Material Finish Knockout

RR-LBG1T274-1 Steel Galvanized, HOG

STEEL MEDIUM - 2 KNOCKOUTS

CODE Material Finish Knockout

RR-LBG2T274-2 Steel Galvanized, HOG 2

STEEL MEDIUM - 3 KNOCKOUT

CODE Material Finish Knockout

RR-LBG3T274-3 Steel Galvanized, HOG 3

STEEL MEDIUM - 4 KNOCKOUT

CODE Material Finish Knockout

RR-LBG4T274-4 Steel Galvanized, HOG 4

MALLEABLE IRON MEDIUM - 1 KNOCKOUT

CODE Material Finish Knockout

RR-LBM1T272-1 Malleable lron Galvanized

MALLEABLE IRON MEDIUM - 2 KNOCKOUT

CODE Material Finish Knockout

RR-LBM2T272-2 Malleable lron Galvanized 2

MALLEABLE IRON MEDIUM - 3 KNOCKOUT

CODE Material Finish Knockout

RR-LBM3T272-3 Malleable lron Galvanized 3

MALLEABLE IRON MEDIUM - 4 KNOCKOUT

CODE Material Finish Knockout

RR-LBM4T272-4 Malleable lron Galvanized 4

BENDS
INTERNAL THREAD NORMAL BENDS
-------------------------------------------------------------
CODE Size 8531 SIZE Material/ Finish

RR-1020-T141 20mm 3/4"

RR-1025-T141 25mm 1"

RR-1032-T141 32mm MATERIAL: Steel

FINISH : Galvanized
1 1/2"

RR-1040-T141 40mm

RR-1050-T141 50mm 2"

-------------------------- ------------- --------------------

INSPECTION BENDS

CODE Size Material Finish

RR-1020-T145 20mm Malleable Iron Galvanized

RR-1025-T145 25mm Malleable Iron Galvanized

RR-1032-T145 32mm Malleable Iron Galvanized

SOLID TEE

CODE Size Material Finish

6S
RR-1020-T131 20mm Malleable Iron Galvanized

RR-1025-T131 25mm Malleable Iron Galvanized

RR-1032-T131 32mm Malleable Iron Galvanized

CHANNEL INSPECTION TEE

a
CODE Size Material Finish

RR-1020-T133 20mm Malleable Iron Galvanized

RR-1025-T133 25mm Malleable Iron Galvanized

RR-1032-T133 32mm Malleable Iron Galvanized