Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                

Wang 2017

Download as pdf or txt
Download as pdf or txt
You are on page 1of 9

Appl Biochem Biotechnol

DOI 10.1007/s12010-017-2410-y

Establishment of Bioprocess for Synthesis of Nicotinamide


by Recombinant Escherichia coli Expressing
High-Molecular-Mass Nitrile Hydratase

Zhe Wang 1 & Zhongmei Liu 1 & Wenjing Cui 1 &


Zhemin Zhou 1

Received: 28 September 2016 / Accepted: 13 January 2017


# Springer Science+Business Media New York 2017

Abstract Application of engineered bacteria expressing nitrile hydratase for the pro-
duction of amide is getting tremendous attention due to the rapid development of
recombinant DNA technique. This study evaluated the effect of 3-cyanopyridine
concentrations on nicotinamide production using recombinant Escherichia coli strain
(BAG) expressing high-molecular-mass nitrile hydratase from Rhodococcus
rhodochrous J1, and established proper process of whole-cell catalysis of 3-
cyanopyridine and high cell-density cultivation. The process of substrate fed-batch
was applied in the production of nicotinamide, and the concentration of product
reached 390 g/L under the condition of low cell-density. After the high cell-density
cultivation of BAG in 5 L bioreactor, the OD600 of cell attained 200 and the total
activity reached 2813 U/mL. Different high density of BAG after fermentation in the
tank was used to catalyze 3-cyanopyridine, and the concentration of nicotinamide
reached to 508 g/L in just 60 min. The productivity of BAG was 212% higher than
that of R. rhodochrous J1, and it is possible that BAG is able to achieve industrial
production of nicotinamide.

Keywords Escherichia coli . High-molecular-mass nitrile hydratase . Whole-cell catalysis .


Substrate fed-batch . High cell-density cultivation

* Zhongmei Liu
zliu@jiangnan.edu.cn
* Zhemin Zhou
zhmzhou@jiangnan.edu.cn

1
Key Laboratory of Industrial Biotechnology, Ministry of Education, School of Biotechnology,
Jiangnan University, Wuxi, Jiangsu 214122, China
Appl Biochem Biotechnol

Introduction

Nitrile hydratase (NHase, EC 4.2.1.84) [1, 2], which is composed of α- and β- subunits,
contains either non-heme iron [3, 4] or non-corrin cobalt ion [5–7] in the activity center. NHase
can efficiently catalyze nitrile to the corresponding amide and mainly used for industrial
production of acrylamide and nicotinamide [8]. Most of NHases come from Rhodococcus,
Pseudonocardia, and Nocardia [9].
As green production is getting more and more attention, the traditional chemical methods
have given priority to biological methods consisting of enzyme and whole-cell catalysis [10,
11] and NHase is a classical example of biological production [8]. Due to the high-value
product and high catalytic activity, NHase has attracted wide attention in the green industry
[12]. Nicotinamide, a kind of important intermediates for drug and pesticide synthesis, also has
a wide range of industry applications in the medicinal and food industries [13, 14]. Nowadays,
the strain used to produce nicotinamide is Rhodococcus rhodochrous J1 (R. rhodochrous J1),
which is also the third-generation industrial strains producing acrylamide [15, 16]. R.
rhodochrous J1 produces high- and low-molecular-mass NHases (H-NHase and L-NHase,
respectively), which exhibit different physicochemical properties and substrate specificities [1,
17]. Although R. rhodochrous J1 was mainly applied in industrial production, it has a few
limits such as the long cultivation time and low quantity of protein expression [18, 19].
Escherichia coli (E. coli) expression system, however, possesses advantages in protein
expression and growth rate. Some researchers tried to use recombinant E. coli to produce
nicotinamide [14]; however, the yield of products was lower than that produced by R.
rhodochrous J1 [20].
In this study, a recombinant strain E. coli BL21 (DE3)/pET-24a (+)-nhhBrbsArbsG (BAG)
used for H-NHase expression was constructed (unpublished data) and used for producing
nicotinamide. Proper bioprocess of catalysis of 3-cyanopyridine and high cell-density cultiva-
tion using recombinant E. coli were established. Furthermore, the actual industrial catalysis
was also simulated to produce nicotinamide. The productivity of BAG was 212% higher than
that of R. rhodochrous J1, and it is possible that BAG is able to achieve industrial production
of nicotinamide.

Materials and Methods

Bacterial Strain and Culture Media in Flask

E. coli BL21(DE3)/pET-24a(+)-nhhBrbsArbsG (BAG) was constructed and preserved in our


laboratory. The strain was firstly grown in Luria-Bertani (LB) medium supplemented with
50 μg/mL kanamycin and then the cells were transformed into 2YT medium supplemented
with 50 μg/mL kanamycin.

NHase Expression (in Flask) and Cell Activity Assay

E. coli cells carrying the recombinant plasmid were cultured in the 2YT medium with
kanamycin at 37 °C. Isopropyl β-D-thiogalactopyranoside (IPTG) and CoCl2·6H2O were
added to final concentration of 0.6 mM and 0.1 g/L to induce protein expression when the
OD600 reached 0.6–1. The cells were cultured for 18 h at 30 °C for protein expression.
Appl Biochem Biotechnol

The cell activity was measured in a reaction system (500 μL) consisting of recombinant
cells (OD = 0.2), the substrate (100 mM 3-cyanopyridine), and the buffer (10 mM KPB,
pH 7.5), which was placed for 10 min at 26 °C and stopped by addition of 500 μL acetonitrile.
After the termination of reaction, the tube was centrifuged at 4 °C, 12,000 rpm for 1 min and
then the supernatant was extracted for the following detection. The product (nicotinamide)
concentration was detected by high-pressure liquid chromatography (HPLC) to measure the
BAG’s activity. The quantity (μmol) of nicotinamide that 1 mL fermentation liquor produced
per minute at 26 °C was defined as units per milliliter.

Sodium Dodecyl Sulfate-Polyacrylamide Gel Electrophoresis (SDS-PAGE)

The expression of the recombinant NHase was analyzed using SDS-PAGE (12%) with a 5%
stacking gel. The cells were collected by centrifuge and broken by sonication. The superna-
tants were mixed with SDS-PAGE loading buffer and loaded onto the gels. All samples were
denatured in a boiling water bath for 10 min.

Effect of 3-Cyanopyridine Concentrations on Nicotinamide Production

To study the effect of substrate concentration on production of nicotinamide, the concentration


of 3-cyanopyridine (0.2–1.0 mol/L) was varied in a 30-mL reaction mixture containing cells of
which OD600 value was 8. The reaction’s temperature was maintained at 26 °C, and the
concentration of 3-cyanopyridine was determined by HPLC.

Fed-Batch Reaction for Nicotinamide Production

According to the effect of 3-cyanopyridine concentrations on nicotinamide, feeding of 41.64 g/L


(0.4 mol/L) substrate (powder) was performed interval in a 250-mL flask containing 30 mL reaction
mixture with cells of which OD600 values were 8.0, 80, 120, and 160. The reaction’s temperature
was maintained at 26 °C, and a sample was withdrawn before every feed for 3-cyanopyridine.

Fed-Batch Cultivation in 5-L Fermenter Using BAG

Fed-batch cultivations were performed in a 5-L bioreactor with an initial 2 L of medium


(12.0 g/L glucose, 13.5 g/L KH2PO4, 4.0 g/L (NH4)2HPO4, 1.7 g citric acid, 1.68 g MgSO4,
and 10 mL trace metal solution consisting 10.0 g/L FeSO4·7H2O, 2.0 g/L CaCl2, 5.25 g/L
ZnSO4·7H2O, 0.5 g/L MnSO4·4H2O, 3.0 g/L CuSO4·5H2O, 0.1 g/L (NH4)6MoO24·4H2O, and
0.23 g/L Na2B4O7·10H2O dissolved in 1 M HCl). The preinoculum culture was 120 mL LB
liquid medium supplemented with 50 μg/mL kanamycin and shaken at 200 rpm at 37 °C.
After 7.5 h, the culture was inoculated into the fermenter under sterile conditions. The
inoculation volume was 6%. The culture was performed at 37 °C for about 6 h until the
dissolved oxygen (DO) suddenly rose. Subsequently, the feed medium (500 g/L glucose, 4 g/L
yeast extract, 4 g/L tryptone, and 7.33 g/L MgSO4) was added to the fermenter by exponential
feeding. The exponential feeding strategy allows cells to grow at a constant specific growth
rate by using glucose as a growth-limiting nutrient. When the OD600 reached to 60, the
temperature was gradually reduced to 30 °C and we added mixed solution containing lactose
(10%, w/v) and CoCl2·6H2O (9.3%, w/v) at speed of 0.22 g/(L·h). During the entire process,
the pH was maintained at 7.0 through the automatic addition of ammonium solution (25%, w/v).
Appl Biochem Biotechnol

Antifoam was added manually when necessary. The dissolved oxygen level (DO) was main-
tained at approximately 30% air saturation throughout fermentation. The initial airflow rate was
5 L/min, and increased with the need for DO. The end of the cultivation was determined by a
reduction in the oxygen consumption rate and an increase in the pH value.

Results and Discussion

Effect of 3-Cyanopyridine Concentrations on Nicotinamide Production

The recombinant strain BAG was incubated for H-NHase expression. The NHase activity
reached maximum (95.8 U/mL) after incubation for 18 h, and the OD600 of cells reached 8.68
(Fig. 1A). SDS-PAGE analysis indicated that H-NHase was successfully expressed (Fig. 1B).
In order to establish proper process of catalysis, the effect of 3-cyanopyridine concentration on
the catalytic efficiency of the H-NHase was examined. The recombinant cells after incubation
for 18 h were collected and then suspended in 10 mM KPB (OD600 = 8); Each of 0.2, 0.4, 0.6,
0.8, and 1.0 mol/L 3-cyanopyridine (final concentration) was mixed with the suspended cells,
the reaction rate was calculated after the 3-cyanopyridine was completely converted into
nicotinamide. As shown in Fig. 2, when the original concentration of 3-cyanopyridine was
0.4 mol/L, it showed the highest reaction rate. The catalytic rate decreased with increasing 3-
cyanopyridine concentration (0.6–0.8 mol/L), suggesting substrate inhibition.

Fed-Batch Reaction for Nicotinamide Production

The method of substrate-flow was originally intended to apply to achieve the hydration
reaction, like the production of acrylamide [21]. However, the maximum solubility of 3-

Fig. 1 Batch culture course in 250 mL flask of BAG. a Cell growth and NHase activity during batch cultivation.
b SDS-PAGE analysis of the NHase gene expression in the recombinant strain. The cells were collected after
18 h induction by centrifuge and broken by sonication, and then the supernatants were loaded onto the gels. M:
protein molecular mass markers; 1: Supernatants of BL21(DE3)/pET-24a (+) expression as a comparison; 2:
Supernatants of BAG
Appl Biochem Biotechnol

Fig. 2 Effect of 3-cyanopyridine concentration on the catalytic efficiency of the H-NHase. Feeding of different
concentration (0.2–1.0 mol/L) of 3-cyanopyridine (powder) was performed interval in a 250-mL flask containing
30 mL reaction mixture with cells of which OD600 value were 8.0. The temperature was maintained at 26 °C

cyanopyridine is about 1 mol/L and it failed to obtain high concentration of nicotinamide.


Thus, a fed-batch reaction using solid powders of 3-cyanopyridine was carried out to gain our
target compound. Solid powders of 3-cyanopyridine were added to the reaction system which
contained 30 mL of cells (OD600 = 8), and the next batch of substrate were not added until
remaining substrate was depleted. To maintain the highest reaction rate, 3-cyanopyridine was
added 0.4 mol/L each time. At the beginning of the reaction, it took 10 min to convert the
substrate and the catalytic rate could be maintained until the concentration of product reached
to nearly 250 g/L (Fig. 3). Then, the reaction rate decreased subsequently and 390 g/L
nicotinamide was obtained at 105 min.

Fed-Batch Cultivation of BAG in 5-L Fermenter

The highest OD600 of cells after the flask cultivation was about 8, which failed to meet the
requirement of industrial production and achieve high reaction rate. Therefore, it is necessary
to establish high cell-density cultivation of recombinant E. coli, which is also an effective way
to enhance the expression of heterologous protein. In this study, fed-batch cultivation was
applied to achieve the high-density cultivation of BAG. The time course for a representative
cultivation in a 5-L fermenter and other parameters was shown in Fig. 4. As shown in Fig. 4A,
the DO reached to 100% sharply after 6 h incubation and the feeding process was started.
When the OD600 was almost 60, the temperature was gradually reduced to 30 °C to induce the
expression of the recombinant NHase. The OD600 of cells was about 200 at 44 h, and the
highest total activity reached about 2813 U/mL. There was no accumulation of glucose, and
the concentration of acetic acid was no more than 0.5 g/L during the fed-batch cultivation.
SDS-PAGE analysis showed that the expression level of H-NHase per unit biomass was
Appl Biochem Biotechnol

Fig. 3 Hydration reaction of 3-cyanopyridine to nicotinamide catalyzed by BAG during the fed-batch reaction.
Feeding of 41.64 g/L (0.4 mol/L) 3-cyanopyridine (powder) was performed interval in a 250-mL flask containing
30 mL reaction mixture with cells of which OD600 value were 8.0. The temperature was maintained at 26 °C

Fig. 4 High-density fermentation of BAG in a 5-L fermenter. a Cell growth and NHase activity, concentrations
of glucose and acetic acid during fed-batch cultivation. b Changes of pH, rotation rate, dissolve oxygen, and
temperature during fed-batch cultivation. c SDS-PAGE analysis of the NHase gene expression in the recombinant
strain. The cells were collected at different time and broken by sonication, and then the supernatants were loaded
onto the gels. M: protein molecular mass markers; 24–48 h: protein expression in different time of growth. d
Specific growth rate of cells during fed-batch cultivation
Appl Biochem Biotechnol

increased with time (Fig. 4C). The specific growth rate (Fig. 4D) fluctuated around 0.2 h−1
during the period when exponential feeding strategy was performed (6–16 h).

Nicotinamide Production by High Density of BAG

In order to be closer to the actual production situation in enterprises, high density of


BAG, which was cultivated and induced in 5-L fermenter, was used to catalyze. Three
different density of BAG (OD 600 = 80, 120, 160) was applied to catalyze 3-
cyanopyridine. As shown in Fig. 5, at the beginning of the reaction, it took just a
few minutes to convert the substrate completely because of the high cell-density.
However, when the concentration of nicotinamide reached to about 340 g/L, the
catalytic rate started to reduce whatever the OD600 were 80, 120, or 160. The higher
OD of cells, the slower the rate decreased. The highest concentration of nicotinamide
we obtained was 508 g/L at reaction system which OD600 of cells was 160 in just 1 h
(Fig. 5C). Higher density of cells could improve the original rate of reaction and
shorten the catalytic time, but it could not change cells’ tolerance to product. It could
be seen that final concentration of the product produced by 160 OD600 cells is just
6.25% higher than that of the product produced by 120 OD600 cells (Fig. 5B). It could
also be predicted that when the density of cells was higher than 160 OD600, the final

Fig. 5 Nicotinamide production by different high density of BAG. Feeding of 41.64 g/L (0.4 mol/L) 3-
cyanopyridine (powder) was performed interval in a 250-mL flask containing 30 mL reaction mixture with
BAG which was cultivated and induced in 5-L fermenter. The temperature was maintained at 26 °C. The
reactions were terminated at 60 min. a OD600 of cell was 80. b OD600 of cell was 120. c OD600 of cell was 160
Appl Biochem Biotechnol

concentration of nicotinamide would be more than 508 g/L but not much too higher.
Thus, in industrial production, there was no need to choose the highest cell density.
Not like R. rhodochrous J1, the tolerance to organic solution of E. coli was limited.
Nevertheless, the fermentation period of R. rhodochrous J1 was up to 100 h [18] and the cell
activity (2100 U/mL) [22] was 34% lower than that of BAG. By contrast, BAG’s fermentation
time was just half of that of R. rhodochrous J1 and the product concentration can reach the
standard of industry by using shorter catalytic time. The productivity of BAG was 508 g/(L·h),
which was 212% higher than that of R. rhodochrous J1 (162.8 g/(L·h)) [20]. As mentioned
above, R. rhodochrous J1 also produces L-NHase, and a recombinant strain E. coli containing
L-NHase genes (BAE) was constructed. Though the BAE possessed higher activity than BAG,
during the process of catalysis, cell activity of BAE dropped sharply in the high concentration
of production. When the concentration of nicotinamide was 1.0 mol/L, the relative enzyme
activity of BAE was no more than 10%, while the BAG still kept its catalytic ability more than
70% at the same concentration of nicotinamide.
The BAG was also used for producing acrylamide, another industrial production used by
NHase, and the final concentration of acrylamide reached 44% at reaction system which
OD600 of cell was 160 in just 1 h. The short fermentation period and high quantity of protein
expression will make BAG possess broad application prospect. Of course, extensive researches
should be conducted to improve the cell and enzyme’s tolerance to nicotinamide and acryl-
amide in order to gain higher concentration of production.

Acknowledgements This work was financially supported by a Project Funded by the Priority Academic
Program Development of Jiangsu Higher Education Institutions, the 111 Project (No. 111-2-06), the Jiangsu
province BCollaborative Innovation Center for Advanced Industrial Fermentation^ industry development pro-
gram, the National Natural Science Foundation of China (31400078, 31400058), the Natural Science Foundation
of Jiangsu Province for Youth Fund (BK20140151), and the International S&T Innovation Cooperation Key
Project (2016YFE0127400).

References

1. Kobayashi, M., & Shimizu, S. (1998). Metalloenzyme nitrile hydratase: structure, regulation, and applica-
tion to biotechnology. Nature Biotechnology, 16, 733–736.
2. Asano, Y., Tani, Y., & Yamada, H. (1980). A new enzyme Bnitrile hydratase^ which degrades acetonitrile in
combination with amidase. Agricultural and Biological Chemistry, 44, 2251–2252.
3. Noguchi, T., Nojiri, M., Takei, K., Odaka, M., & Kamiya, N. (2003). Protonation structures of Cys-sulfinic
and Cys-sulfenic acids in the photosensitive nitrile hydratase revealed by Fourier transform infrared
spectroscopy. Biochemistry, 42, 11642–11650.
4. Greene, S. N., & Richards, N. G. (2006). Electronic structure, bonding, spectroscopy and energetics of Fe-
dependent nitrile hydratase active-site models. Inorganic Chemistry, 45, 17–36.
5. Komeda, H., Kobayashi, M., & Shimizu, S. (1996). A novel gene cluster including the Rhodococcus
rhodochrous J1 nhlBA genes encoding a low molecular mass nitrile hydratase (L-NHase) induced by its
reaction product. The Journal of Biological Chemistry, 271, 15796–15802.
6. Kobayashi, M., & Shimizu, S. (1999). Cobalt proteins. European Journal of Biochemistry, 261, 1–9.
7. Payne, M. S., Wu, S., Fallon, R. D., Tudor, G., Stieglitz, B., Turner Jr., I. M., & Nelson, M. J. (1997). A
stereoselective cobalt-containing nitrile hydratase. Biochemistry, 36, 5447–5454.
8. Yamada, H., & Kobayashi, M. (1996). Nitrile hydratase and its application to industrial production of
acrylamide. Bioscience Biotechnology and Biochemistry, 60, 1391–1400.
9. Prasad, S., & Bhalla, T. C. (2010). Nitrile hydratases (NHases): at the interface of academia and industry.
Biotechnology Advances, 28, 725–741.
10. de Carvalho, C. C. C. R. (2011). Enzymatic and whole cell catalysis: finding new strategies for old
processes. Biotechnology Advances, 29, 75–83.
Appl Biochem Biotechnol

11. Schmid, A., Dordick, J. S., Hauer, B., Kiener, A., Wubbolts, M., & Witholt, B. (2001). Industrial
biocatalysis today and tomorrow. Nature, 409, 258–268.
12. Liu, Y., Cui, W., Liu, Z., Cui, Y., Xia, Y., Kobayashi, M., & Zhou, Z. (2014). Effect of flexibility and
positive charge of the C-terminal domain on the activator P14K function for nitrile hydratase in
Pseudomonas putida. FEMS Microbiology Letters, 352, 38–44.
13. Ravi, S., Mathew, K. M., & Sivaprasad, N. (2008). A rapid microwave induced synthesis of [carboxyl-
14C]-nicotinic acid (vitamin B3) and [carbonyl-14C]-nicotinamide using K14CN. J. Radioanal. Nucl. Ch,
275, 441–444.
14. Li, B., Su, J., & Tao, J. (2010). Enzyme and process development for production of nicotinamide. Org.
Process Res. De, 15, 291–293.
15. Nagasawa, T., Takeuchi, K., & Yamada, H. (1988). Occurrence of a cobalt-induced and cobalt-containing
nitrile hydratase in Rhodococcus rhodochrous J1. Biochem. Bioph. Res. Co, 155, 1008–1016.
16. Nagasawa, T., Takeuchi, K., & Yamada, H. (1991). Characterization of a new cobalt-containing nitrile
hydratase purified from urea-induced cells of Rhodococcus rhodochrous J1. European Journal of
Biochemistry, 196, 581–589.
17. Komeda, H., Kobayashi, M., & Shimizu, S. (1996). Characterization of the gene cluster of high-molecular-
mass nitrile hydratase (H-NHase) induced by its reaction product in Rhodococcus rhodochrous J1.
Proceedings of the National Academy of Sciences of the United States of America, 93, 4267–4272.
18. Nagasawa, T., Takeuchi, K., Nardi-Dei, V., Mihara, Y., & Yamada, H. (1991). Optimum culture conditions
for the production of cobalt-containing nitrile hydratase by Rhodococcus rhodochrous J1. Appl. Microbiol.
Biot, 34, 783–788.
19. Zhou, Z., Hashimoto, Y., Shiraki, K., & Kobayashi, M. (2008). Discovery of posttranslational maturation by
self-subunit swapping. Proceedings of the National Academy of Sciences of the United States of America,
105, 14849–14854.
20. Nagasawa, T., Mathew, C. D., Mauger, J., & Yamada, H. (1988). Nitrile hydratase-catalyzed production of
nicotinamide from 3-cyanopyridine in Rhodococcus rhodochrous J1. Applied and Environmental
Microbiology, 54, 1766–1769.
21. Tian, Y., Chen, J., Yu, H., & Shen, Z. (2016). Overproduction of the Escherichia coli chaperones GroEL-
GroES in Rhodococcus ruber improves the activity and stability of cell catalysts harboring a nitrile
hydratase. J. Microbiol. Biotechn, 26, 337–346.
22. Nagasawa, T., Takeuchi, K., & Yamada, H. (1993). The superiority of the third-generation catalyst,
Rhodococcus rhodochrous J1 nitrile hydratase, for industrial production of acrylamide. Applied
Microbiology and Biotechnology, 40, 189–195.

You might also like