Ms-01-180 - Swagelok Hoses Brochure

Hose and Flexible Tubing 1
www.swagelok.com
FITTINGS
TUBE
Hose and Flex ible Tubing
PIPE, WELD,
VCR, VCO
FITTINGS
STANDARD
TUBING
FLEXIBLE
TUBING
HOSE /
BALL & PLUG
VALVES
DIAPHRAGM
BELLOWS,
VALVES
CHECK & RELIEF
VALVES
METERING
NEEDLE &
VALVES
INSTRUMENT
MANIFOLD
SYSTEMS
MODULAR
SYSTEMD
REGULATORS
& FILTERS
Hose As se mblie s, Bulk Hose, Flex ible Tubing,
a nd End Conne ctions
MEASUREMENT
■ Core materials include metal, PTFE, PFA, vinyl, nylon, polyethylene, and rubber
DEVICES
■ Nominal hose sizes 1/8 to 2 in.
■ Wide range of fractional and metric end connections

MEDIUM- HIGH-
PRESSURE
■ Custom lengths available
■ Optional covers, tagging, and testing

REFERENCES
2 Hose, Quick-Connects, and Sample Cylinders
Contents
FITTINGS
TUBE
Swagelok® Hose and Flexible Metal Hose Hybrid Hose

Tubing Nomenclature, 4
PIPE, WELD,
VCR, VCO
FITTINGS
FX Series Metal Hose, 11 FP Series Hybrid Hose, 47

Swagelok Hose and Flexible
SWAGELOK
SWAGELOK
Tubing Selection Guide, 7
STANDARD
TUBING
Considerations for Selecting a Fluoropolymer Hose

Hose Assembly Solution, 9 FM Series Metal Hose, 16
FLEXIBLE
TUBING
T Series PTFE Hose, 50

HOSE /
Swagelok Hose and Flexible

Tubing Installation and Use
Guide, 10
BALL & PLUG
VALVES
FJ Series Metal Hose, 22
B Series PTFE Hose, 56

DIAPHRAGM
BELLOWS,
VALVES
FL Series Metal Hose, 27

CHECK & RELIEF
X Series PTFE Hose, 58

VALVES
METERING
NEEDLE &
AH Series Metal Hose, 33

VALVES
S Series PTFE Hose, 60

INSTRUMENT
MANIFOLD
SYSTEMS
Metal Flexible Tubing

MODULAR
SYSTEMD
C Series PTFE Hose, 62
FN Metal Tubing, 37
TA to match the first one
REGULATORS
& FILTERS
TA to match the Microsoft Teams image png
J Series PTFE Hose, 64

FZ Metal Tubing, 39
MEASUREMENT

DEVICES

MEDIUM- HIGH-
N Series PTFE Hose, 66

PRESSURE
Convoluted Metal
Tubing, 42
REFERENCES
Contents
FITTINGS
TUBE
W Series PTFE Hose, 68 Nylon Hose Options
PIPE, WELD,
VCR, VCO
FITTINGS
NG Series Nylon Hose, 90 Covers, 108
Testing, 108
STANDARD
F Series PTFE Hose, 70
TUBING
Tags, 109
7R and 8R Series Nylon Hose, 95
FLEXIBLE
TUBING
HOSE /
Approvals, 110
U Series PFA Hose, 72
Considerations for Hose
BALL & PLUG

VALVES
Insulation, 112
7N Series Nylon Hose, 96
Y Insulation Option, 113

PFA Tubing
DIAPHRAGM
BELLOWS,
VALVES
Tools and Accessories
PFA Series PFA Tubing, 84
Polyethylene Hose
CHECK & RELIEF

Cutting Tools for Hose
VALVES
and Soft Tubing, 114
7P Series Polyethylene Hose, 101

Assembly Tools for Nylon,
Polyethylene, and Rubber Hose,
METERING
NEEDLE &
VALVES
Vinyl Tubing 114
LT Series Vinyl Tubing, 86

Rubber Hose
INSTRUMENT
MANIFOLD
SYSTEMS
PB Series Rubber Hose, 103
MODULAR
SYSTEMD
Hose Connectors
HC Series—End Connections for
REGULATORS
Soft Tubing and Hose, 87 & FILTERS
MEASUREMENT
DEVICES
Dimensions, in inches (millimeters), are for reference only

MEDIUM- HIGH-
and are subject to change. Dimensions are shown with

PRESSURE
Swagelok nuts finger-tight. For Swagelok nut dimensions,

refer to Gaugeable Tube Fittings and Adapter Fittings catalog,
MS‑01‑140. For technical drawings showing dimensions,
contact your authorized Swagelok sales and service
REFERENCES
representative.
FITTINGS
Swagelok Hose and Flexible Tubing Nomenclature

TUBE
Hose Minimum Dynamic Bend Radius Permeation
SWAGELOK
SWAGELOK
A multiple-layered flexible conduit The smallest bend radius that a hose The movement of a liquid, gas, or
through which fluid is conveyed from is rated to perform in a dynamic vapor through a solid. All materials
PIPE, WELD,
VCR, VCO
FITTINGS
one point to another. application. are permeable to a degree and

should be tested for application
SW
Nominal Hose Size Minimum Static Bend Radius
AG
compatibility prior to installation.
ELO
An approximation of the hose inside The smallest bend radius that a hose is
K
diameter. rated to perform in a static application. Dynamic Application
STANDARD
TUBING
An application in which the hose

Flexible Tubing Flexibility
flexes or changes position.
A single-layered flexible conduit The relative ease or difficulty of
through which fluid is conveyed from bending a nonpressurized hose or Static Application
one point to another. tubing assembly. An application in which the hose is
FLEXIBLE
TUBING
HOSE /
stationary and does not move in any

Bend Radius Burst Pressure
plane.
The radius of the bent section of The pressure at which leakage occurs
hose, measured to the center line or when exposed to a laboratory burst test.
inside of the curved section.
BALL & PLUG
VALVES
DIAPHRAGM
BELLOWS,
VALVES
CHECK & RELIEF
VALVES
Inside Center line

bend radius bend radius
METERING
NEEDLE &
VALVES
INSTRUMENT
MANIFOLD
SYSTEMS
Splices
Splices consist of a connector
fitting and crimp collars that join two
lengths of hose to form assemblies.
Splices may be required to obtain
MODULAR
SYSTEMD
longer hose lengths of fluoropolymer A

hose (B, X, S, C, J, N, W, F, and U CA-PH-1294-DM
series), as noted in the Ordering Dimensions, in. (mm)
Information for each series. Nominal Minimum Maximum
REGULATORS
Hose Size A Inside Outside

& FILTERS
Splice dimensions shown in the

in. (mm) Maximum Diameter Dimension
table at right are for reference
1/8 (3.2) 2.60 (66.0) 0.070 (1.7) 0.55 (14.0)
only and are subject to change.
1/4 (6.4) 2.60 (66.0) 0.16 (4.0) 0.59 (15.0)
Additional overall hose length may
3/8 (9.6) 3.30 (83.8) 0.26 (6.6) 0.82 (20.8)
MEASUREMENT
be needed to compensate for the

DEVICES
effect of splices on hose minimum 1/2 (12.7) 3.70 (94.0) 0.34 (8.6) 1.04 (26.4)
bend radius. For more information, 3/4 (19.0) 4.80 (122) 0.54 (13.7) 1.35 (34.3)
contact your authorized Swagelok 1 (25.4) 4.60 (117) 0.78 (19.8) 1.75 (44.4)
sales and service representative. 1 1/2 (38.1) 5.60 (142) 1.24 (31.4) 2.20 (55.9)
MEDIUM- HIGH-
2 (50.8) 6.90 (175) 1.68 (42.6) 2.74 (69.6)

PRESSURE
REFERENCES
FITTINGS
TUBE
Conductive
A material that easily conducts an electrical current, having an electrical resistance less than 1×104 ohms. Swagelok
PIPE, WELD,
VCR, VCO
FITTINGS
hoses with metal cores are examples of conductive hoses.
Static Dissipative
A material that has the ability to alleviate a static electrical charge, having an electrical resistance more than 1×104 ohms
STANDARD
but less than 1×1011 ohms. Select Swagelok hoses are constructed with carbon black filled core materials (nylon, PTFE,
TUBING
or PFA) to provide static dissipation. The intent of a hose being static dissipative is to alleviate any static charge that may
build as fluid flows through the hose. Note that hoses with conductive cores may also be used in applications where fluid
flow generates a static charge. The lower electrical resistance in a conductive core dissipates the charge more readily.
FLEXIBLE
Non-Conductive
TUBING
HOSE /
A material that does not normally transmit or conduct an electrical charge. Materials considered non-conductive have an
electrical resistance in excess of 1×1011 ohms. Swagelok hoses constructed with non-metallic cores that do not contain
carbon black are generally non-conductive. However, the presence of metal braid may make a hose conductive from end
connection to end connection.
BALL & PLUG

VALVES
Unspecified
The term used for hoses that do not have a design intent concerning electrical properties. These hoses may be either
conductive or non-conductive depending on assembly tolerances from hose to hose, or other factors.
DIAPHRAGM
BELLOWS,
VALVES
It is important to consider the electrical properties of the hose core, the reinforcing layer(s), and the overall end-to-
end assembly to ensure the desired results. A hose is considered conductive if it easily carries a charge from one
end connection to the other, even if the core does not contain carbon black. The charge is carried through the metal
reinforcing braid. If the core does not contain carbon black, the media in the hose is electrically insulated from the wire
CHECK & RELIEF

VALVES
braid, making it possible for a charge to build along the core tube.
The table below summarizes the electrical properties of each hose series core, reinforcement layer(s), and total assembly
end-to-end. Hoses are identified with a letter notation as follows:
• Non-conductive (N)
METERING
NEEDLE &
VALVES
• Conductive (C)
• Static dissipative (D)
• Unspecified (U)
• Not applicable (N/A)
INSTRUMENT
MANIFOLD
SYSTEMS
Hose End Connection to Hose End Connection to
Series Core Reinforcement End Connection Series Core Reinforcement End Connection
FM C C C SC D U D
FJ C C C CT N U U
MODULAR
SYSTEMD
FL C C C CC D U D
FX C C C JT N U U
AH C C C NC D U D
REGULATORS
& FILTERS
FN C N/A C WC D U D
FZ C N/A C FT N U U
Convoluted FC D U D
C N/A C
Tube
MEASUREMENT
UT N U U
DEVICES
TH N C C
UC D U D
TC D C C
NG D U D
TL N C C
7R N U U
MEDIUM- HIGH-
BT N U U
PRESSURE
8R N U U
XT N U U
7N N N N
XC D U D
7P N U U
ST N U U
REFERENCES
PB N U U
FITTINGS

TUBE
PIPE, WELD,
VCR, VCO
FITTINGS
End Connection
The fitting that is assembled
Maximum Outside Dimension Live Length (L) onto each end of the hose to
The largest nominal outside The flexible length of a
STANDARD
provide a means of installation

TUBING
dimension of the hose assembly. hose or tubing assembly. into a fluid system.
Live Length (L)

FLEXIBLE
TUBING
HOSE /
BALL & PLUG
A
VALVES
Overall Length (OAL)
Braid (Overbraid) Overall Length (OAL) End Connection Length (A)

A flexible, woven The distance from Overall length of the end
DIAPHRAGM
BELLOWS,
VALVES
reinforcement. end to end for a hose connection.

or tubing assembly.
Core
CHECK & RELIEF
The innermost material of the hose

VALVES
that carries the system media, often

referred to as the wetted surface.
Spring Guard Reinforcement

METERING
NEEDLE &
VALVES
A helical metal spring used to Material used to

protect the hose from abrasion, reinforce the core
overbending, and kinking. and increase its
pressure-containing
INSTRUMENT
capacity.
MANIFOLD
SYSTEMS
MODULAR
SYSTEMD
Cover Minimum Inside Diameter

REGULATORS
& FILTERS
The outermost material of a hose, used to The smallest inside diameter of

protect the reinforcement and core from the hose prior to assembly.
environmental conditions and wear.
MEASUREMENT
DEVICES
MEDIUM- HIGH-
PRESSURE
REFERENCES
Swagelok Hose and Flexible Tubing Selection Guide
FITTINGS
See individual hose series sections for additional technical information.
TUBE
Materials of Construction
Series Core Reinforcement Cover Page
Metal Hose
PIPE, WELD,
VCR, VCO
FITTINGS
321 SS braid standard;
FX Convoluted 316L SS — 11
316L SS braid available
FM Convoluted 316L SS 316L SS braid — 16
304 SS braid standard;

FJ Convoluted 316L SS — 22
STANDARD
316L SS braid available
TUBING
321 SS braid (1/4 and 1/2 in.)
FL Convoluted 316L SS — 27
316L SS braid (all other sizes)
AH Convoluted C-276 316L SS braid — 33
FLEXIBLE
TUBING
HOSE /
FN Convoluted 316L SS, annealed — — 37
FZ Convoluted 316L SS — — 39
BALL & PLUG

VALVES
Convoluted
Convoluted 321 SS, annealed — — 42
Tube
Fluoropolymer Hose
304 SS braid standard; 316L SS
T Smooth-bore PTFE➀ — 50
and alloy 400 braid available
DIAPHRAGM
BELLOWS,
VALVES
B Smooth-bore PTFE 304 SS braid — 56
X Smooth-bore PTFE➀ Fiber braid with 304 SS braid — 58
CHECK & RELIEF

S Smooth-bore PTFE➀ Fiber braid with 304 SS braid Silicone 60
VALVES
C Convoluted PTFE➀ 304 SS braid — 62
J Convoluted PTFE 304 SS braid Silicone 64
METERING
NEEDLE &
VALVES
Convoluted, Insulating wrap
N — 66
carbon black-filled PTFE and aramid fiber braid
Smooth-bore, Fiber braid with insulating wrap
W Silicone 68
carbon black-filled PTFE and 304 SS braid
INSTRUMENT
MANIFOLD
F Smooth-bore PTFE➀ Fiber braid — 70
SYSTEMS
U Smooth-bore PFA➁ 302 SS braid Silicone 72
PFA Tubing
MODULAR
PFA Smooth-bore PFA — — 84
SYSTEMD
Vinyl Tubing
LT Smooth-bore clear vinyl — — 86

Nylon Hose
REGULATORS
NG
Smooth-bore,
Fiber braid Perforated black polyurethane 90 & FILTERS
static dissipative nylon
7R Smooth-bore nylon Fiber braid Perforated black polyurethane 95

MEASUREMENT
8R Smooth-bore nylon Fiber braid Perforated black polyurethane 95

DEVICES
Smooth-bore,
7N Fiber braid Nonperforated orange polyurethane 96
nonconductive nylon
Polyethylene Hose
MEDIUM- HIGH-
PRESSURE
7P Smooth-bore polyethylene Fiber braid Nonperforated blue polyurethane 101

Rubber Hose
Blue Buna N
PB Smooth-bore Buna N Synthetic fiber braid 103
(other colors available)
REFERENCES
➀ Carbon black-filled PTFE core is available for applications that require static dissipation.
➁ Carbon black-filled PFA core is available for applications that require static dissipation.
Swagelok Hose and Flexible Tubing Selection Guide

FITTINGS
See individual hose series sections for additional technical information.

TUBE
Nominal Hose Size, in. Temperature

Working Pressure at 70°F (20°C), psig (bar)④ Range
Series 1/8 3/16 1/4 3/8 1/2 3/4 1 1 1/4 1 1/2 2 °F (°C)④ Page
PIPE, WELD,
Metal Hose
VCR, VCO
FITTINGS
6000 5000 4500 3600 3000 2600 2200 1675 −325 to 1000
FX — — 11
(413) (344) (310) (248) (206) (179) (151) (115) (−200 to 537)
3100 2000 1800 1500 1200 950 900 500 −325 to 850
FM — — 16
(213) (137) (124) (103) (82.6) (65.4) (62.0) (34.4) (−200 to 454)
STANDARD
1600 1470 1110 860 680 680 520 450 −325 to 800
TUBING
FJ — — 22
(110) (101) (76.4) (59.2) (46.8) (46.8) (35.8) (31.0) (−200 to 426)
1500 1470 1200 860 680 645 520 380 −325 to 850
FL — — 27
(103) (101) (82.6) (59.2) (46.8) (44.4) (35.8) (26.1) (−200 to 454)
1110 860 680 520 450 −325 to 800
AH — — — — — 33
(76.4) (59.2) (46.8) (35.8) (31.0) (−200 to 426)
FLEXIBLE
TUBING
HOSE /

135 65 60
FN — — — — — — — 37
(9.3) (4.4) (4.1) -325 to 1000
250 105 95 (-200 to 537)
FZ — — — — — — — 39
BALL & PLUG
(17.2) (7.2) (6.5)

VALVES
Convoluted 100 25 25 25 25 25 70 to 1000

— — — — 42
Tube (6.8) (1.7) (1.7) (1.7) (1.7) (1.7) (20 to 537)
Fluoropolymer Hose
3000➀ 2500 2000 1500 1000
T — — — — — 50
DIAPHRAGM
(206) (172) (137) (103) (68.9)

BELLOWS,
VALVES
3000 −65 to 450

B — — — — — — — — — 56
(206) (−53 to 230)
3500 3000 1800 1250 1000
X — — — — — 58
(241) (206) (124) (86.1) (68.9)
CHECK & RELIEF
3000 3500 3000 1800 1250 1000 −65 to 400

VALVES
S — — — — 60
(206) (241) (206) (124) (86.1) (68.9) (−53 to 204)
1500 1100 750 700 525 −65 to 450➁
C — — — — — 62
(103) (75.7) (51.6) (48.2) (36.1) (−53 to 230)
1500 1100 750 −65 to 400
J — — — — — — — 64
METERING
(103) (75.7) (51.6) (−53 to 204)

NEEDLE &
VALVES
1250 750 375 −65 to 450

N — — — — — — — 66
(86.1) (51.6) (25.8) (−53 to 230)
750 750 500 −65 to 400
W — — — — — — — 68
(51.6) (51.6) (34.4) (−53 to 204)
INSTRUMENT
MANIFOLD
SYSTEMS
800 650 450 325 −65 to 450

F — — — — — — 70
(55.1) (44.7) (31.0) (22.3) (−53 to 230)
300 300 250 200 150 –65 to 400
U — — — — — 72
(20.6) (20.6) (17.2) (13.7) (10.3) (–53 to 204)
PFA Tubing
MODULAR
SYSTEMD
275 275 180 125 83 61 70 to 400

PFA — — — — 84
(18.9) (18.9) (12.4) (8.6) (5.7) (4.2) (20 to 204)
Vinyl Tubing
40 30 25 15 10 −40 to 165
LT — — — — — 86
(2.7) (2.0) (1.7) (1.0) (0.68) (−40 to 73)
REGULATORS
& FILTERS
Nylon Hose
5000 5000 5000 −40 to 150
NG — — — — — — — 90
(344) (344) (344) (−40 to 65)
2750 2250 2000 −40 to 200
7R — — — — — — — 95
(189) (155) (137) (−40 to 93)
MEASUREMENT
DEVICES
5000 4000 3500 2250 2000 −40 to 200

8R — — — — — 95
(344) (275) (241) (155) (137) (−40 to 93)
2750 2250 2000 −40 to 200
7N — — — — — — — 96
(189) (155) (137) (−40 to 93)
Polyethylene Hose
MEDIUM- HIGH-
PRESSURE
2750 2250 2000 1500 1500 −10 to 150

7P — — — — — 101
(189) (155) (137) (103) (103) (−23 to 65)
Rubber Hose
350 300 300 300 300 −40 to 200➂
PB — — — — — 103
(24.1) (20.6) (20.6) (20.6) (20.6) (−40 to 93)
REFERENCES
➀ T series hose with alloy 400 braid is rated to 1500 psig (103 bar). ➁ C series hose is rated from −20 to 340°F (−28 to 171°C) in the 1 1/2 and 2 in. nominal hose sizes.
➂ PB series hose is rated from −20 to 200°F (−28 to 93°C) in the 1 in. nominal hose size. ➃ Pressure-temperature ratings may be limited by the end connections.
Considerations for Selecting a Hose Assembly Solution
FITTINGS
TUBE
Temperature Desired Flow
Identify the minimum and maximum temperatures the hose Consider desired flow. Hose connection size, core tube
assembly will be exposed to with regard to the system media construction, and routed installation may impact flow.
and the environment.
PIPE, WELD,
VCR, VCO
FITTINGS
Drainability
Pressure Consider core construction as this will impact drainability.
Identify the minimum and maximum pressures (or vacuum)
Test Reports
within and outside the hose assembly.
Identify the need for documentation in the form of test
STANDARD
Material reports.
TUBING
Identify the system media and the environment to which the
Special Testing
hose assembly will be exposed. This will help determine
Many applications may require testing to requirements
the materials of construction best suited to the application
different from the production tests listed. For example, metal
demands and whether the hose requires a static dissipative
hose assemblies undergo an inboard helium leak test to a
FLEXIBLE
core.
TUBING
HOSE /
maximum leak rate of 1 × 10 –5 std cm3/s. If your application
Movement uses liquid at a positive pressure, you may request an
Confirm whether the hose assembly will be installed additional hydrostatic proof test.
in dynamic applications as this will require different
Special Marking
BALL & PLUG

considerations than a static application.
VALVES
Discuss special marking requirements; there are different
Length options available to readily identify hose assemblies.
Determine the most likely route for installation of the hose,
Documentation and Regulatory Requirements
and use this to identify length requirements.
Identify the need for special regulatory approvals or
DIAPHRAGM
BELLOWS,
VALVES
documentation.
Additional Protection and Covers
Identify whether covers are necessary for additional
protection of the hose assemblies or surrounding systems.
CHECK & RELIEF

VALVES
Additional Considerations
■ Use of hose and tubing within applications and handling
practices will affect how it performs over time. Catalog
performance claims such as burst pressure, working
METERING
NEEDLE &
VALVES
pressure, static dissipation, moisture content, permeation
rates, and cycle life apply to never-used products. For this
reason, system maintenance and replacement schedules
should be considered.
INSTRUMENT
MANIFOLD
SYSTEMS
Cautions
• Nylon, PFA, polyethylene, PTFE, and rubber are
permeable materials. Gases, vapors, and liquids may
Cleanliness
migrate through cores of these materials. The rate of
MODULAR
SYSTEMD
Identify the need for cleanliness. Ease of cleaning the
permeation is affected by many application-specific
internal surfaces of the hose, as well as maintaining outside
variables.
cleanliness may be of concern.
End Connection
• Nonperforated covers may blister in gas service.
REGULATORS
Identify the type of end connections which are most • Thermal cycling of any nonmetal hose may affect
compatible with the system requirements. End connections its ability to maintain a positive seal. Testing should & FILTERS
differ with regard to materials of construction and pressure be performed to verify suitability in actual operating
ratings. conditions.
MEASUREMENT
Orientation • All equipment must be properly grounded to allow

DEVICES
Clarify space constraint concerns. Hose assemblies static dissipation and help to prevent static sparking.
with elbows and union ball joints may help resolve space
constraint issues. • Nonconductive hoses can be conduits for electricity if
they contain conductive fluids. Verify the conductive
MEDIUM- HIGH-
properties of the system media prior to use.

PRESSURE
REFERENCES
Swagelok Hose and Flexible Tubing Installation and Use Guide

FITTINGS
TUBE
Inspection Motion Absorption

Establish an inspection schedule based on system Distribute movement and prevent bends smaller than the
application and replacement history. hose’s minimum bend radius by providing sufficient hose
length.
PIPE, WELD,
VCR, VCO
FITTINGS
Electrostatic Discharge
Static electricity can be generated by fluid passing through
the hose. Select hose with sufficient conductivity to ground
the static electric charge and allow static dissipation. If
static electricity generation is possible within an application,
STANDARD
TUBING
choose static dissipative hose and properly ground to earth.

Vibration
Evaluate amount of system vibration when selecting hose.
Metal hose may not be appropriate for systems with constant
FLEXIBLE
or severe vibration.
TUBING
HOSE /
Recommended Not recommended

Length stainless motion absorption
Take into consideration hose movement, system Machine Tolerance

pressurization, and thermal expansion when determining Allow for changes in length resulting from machine motion
BALL & PLUG
hose length. Installing hose that does not have sufficient and tolerances.
VALVES
length to accommodate these factors may reduce hose life.

Minimum Bend Radius
Follow minimum bend radius requirements for your hose. Recommended
Installing hose with smaller bends may kink hose and reduce
DIAPHRAGM
BELLOWS,
VALVES
hose life.
Not recommended
System Pressure Changes
Allow sufficient hose length to accommodate changing
CHECK & RELIEF
system pressures. Do not connect high-

stainless and low pressure
VALVES
machine pressure changes

hoses
Minimum Bend
straight radius Lengthen
length
(2x Hose O.D.)
METERING
NEEDLE &
VALVES

Shorten
Hose rupture or leakage may result from bending too close to
INSTRUMENT
MANIFOLD
the hose/fitting connection.

SYSTEMS
Bending in One Plane

Avoid twisting the hose by bending it inStainless
one plane only. For a
MODULAR
SYSTEMD
system pressure changes
compound bend, use multiple hose pieces or other isolation

methods.
REGULATORS

stainless minimum bend radius
& FILTERS
Hose Strain
Elbows and adapters can be used to relieve hose strain.
MEASUREMENT
DEVICES
MEDIUM- HIGH-
PRESSURE

Stainless hose strain
For additional information, see SAE J1273, Recommended

REFERENCES
Practices for Hydraulic Hose Assemblies. stainless bending in one plane

FX Series Metal Hose
FITTINGS
TUBE
Features
■ High-pressure corrosion resistant all-metal hose. ■ Commonly used in high-temperature vacuum and high-
■ 316L stainless steel annular convoluted core. pressure corrosive environments or where permeation is
undesirable.
PIPE, WELD,
VCR, VCO
FITTINGS
■ Size range of 1/4 through 2 in. and working pressures from
vacuum to 6000 psig (413 bar). ■ Custom assemblies available.
■ Double braid layers of 321 stainless steel promotes hose ■ Options include hose covers, hose tags, additional
pressure containment. cleaning, and additional helium leak testing. See page 108
for details.
STANDARD
■ End connections welded in accordance with ASME Boiler
TUBING
and Pressure Vessel Code Section IX. ■ For electrical properties, see page 5 for details.
321 SS Weld
FLEXIBLE
TUBING
HOSE /
double‑braid layers 316L SS core 316 SS
end connections
BALL & PLUG

VALVES
DIAPHRAGM
BELLOWS,
VALVES
304 SS weld collar
Technical Data
CHECK & RELIEF

VALVES
Working
Pressure at Minimum
Minimum Center Line –325 to 300°F Burst Bulk
Bend Radius
Nominal Inside Outside Temperature (–200 to 148°C) Pressure at Hose
in. (cm)
Hose Size Diameter Diameter Range Vacuum to ... 70°F (20°C) Weight
in. (mm) in. (mm) in. (mm) Static Dynamic °F (°C) psig (bar) psig (bar) lb/ft (kg/m)
METERING
NEEDLE &
VALVES
1/4 (6.4) 0.25 (6.4) 0.69 (17.5) 1.5 (3.81) 5.5 (14.0) 6000 (413) 24 000 (1653) 0.49 (0.73)
3/8 (9.7) 0.38 (9.5) 0.92 (23.4) 2.5 (6.40) 7.0 (17.8) 5000 (344) 20 000 (1378) 0.77 (1.15)
1/2 (12.7) 0.51 (13.0) 0.99 (25.1) 3.0 (7.62) 8.0 (20.3) 4500 (310) 18 000 (1240) 0.85 (1.26)
INSTRUMENT
3/4 (19.0) 0.75 (19.0) 1.40 (35.6) 4.0 (10.2) 10.0 (25.4) 3600 (248) 14 400 (992) 1.58 (2.35)
MANIFOLD
–325 to 1000
SYSTEMS
1 (25.4) 1.00 (25.4) 1.70 (43.2) 5.0 (12.7) 11.0 (27.9) (–200 to 537) 3000 (206) 12 000 (826) 2.32 (3.45)
1 1/4 (31.8) 1.25 (31.8) 2.00 (50.8) 6.5 (16.5) 12.5 (31.8) 2600 (179) 10 400 (716) 2.88 (4.29)
1 1/2 (38.1) 1.50 (38.1) 2.36 (59.9) 7.5 (19.1) 13.0 (33.0) 2200 (151) 8 800 (606) 3.57 (5.31)
2 (50.8) 2.00 (50.8) 2.82 (71.6) 9.0 (22.9) 14.0 (35.6) 1675 (115) 6 700 (461) 4.45 (6.62)
MODULAR
SYSTEMD
Pressure-temperature ratings may be limited by the end connections.
Pressure-Temperature Ratings
Ratings are based on ASME Code for Pressure
REGULATORS
& FILTERS
Piping B31.3, Process Piping.
Nominal Hose Size, in. 1/4 3/8 1/2 3/4 1 1 1/4 1 1/2 2
Temperature Working Pressure
MEASUREMENT
°F (°C) Vacuum to ... psig (bar)

DEVICES
–325 (–200) to 300 (148) 6000 (413) 5000 (344) 4500 (310) 3600 (248) 3000 (206) 2600 (179) 2200 (151) 1675 (115)
400 (204) 5640 (388) 4700 (323) 4230 (291) 3384 (233) 2820 (194) 2444 (168) 2068 (142) 1574 (108)
500 (260) 5317 (366) 4431 (305) 3988 (274) 3190 (219) 2658 (183) 2304 (158) 1949 (134) 1484 (102)
600 (315) 5029 (346) 4191 (288) 3772 (259) 3017 (207) 2514 (193) 2179 (150) 1844 (127) 1404 (96.7)
MEDIUM- HIGH-
700 (371) 4850 (334) 4041 (278) 3637 (250) 2910 (200) 2425 (167) 2101 (144) 1778 (122) 1354 (93.2)
PRESSURE
800 (426) 4634 (319) 3862 (266) 3476 (239) 2780 (191) 2317 (159) 2008 (138) 1699 (117) 1293 (89.0)
850 (454) 4562 (314) 3802 (261) 3422 (235) 2737 (188) 2281 (157) 1977 (136) 1673 (115) 1273 (87.7)
900 (482) 4455 (306) 3712 (255) 3341 (230) 2673 (184) 2227 (153) 1930 (132) 1633 (112) 1243 (85.6)
950 (510) 4347 (299) 3622 (249) 3260 (224) 2608 (179) 2173 (149) 1883 (129) 1594 (109) 1213 (83.5)
1000 (537) 4239 (292) 3532 (243) 3179 (219) 2543 (175) 2119 (145) 1837 (126) 1554 (107) 1183 (81.5)
REFERENCES

FITTINGS
TUBE
Testing Cleaning and Packaging • Do not subject flexible metal

Every Swagelok FX series hose Swagelok FX series hose components hose to pressure surges, shock,
assembly is inboard helium leak tested are cleaned in accordance with or pulsations, where the peak
Swagelok Standard Cleaning and pressure is greater than 50 % of
PIPE, WELD,
to a maximum leak rate of 1 × 10 –5

VCR, VCO
FITTINGS
std cm3/s. Packaging (SC‑10) catalog, MS‑06‑62. the working pressure rating.

For additional testing, see Testing, Each hose is bagged individually
page 108. and boxed; longer hoses are coiled,
bagged, and boxed.
STANDARD
TUBING
Ordering Information
Custom Hose Assemblies
FLEXIBLE
TUBING
HOSE /
Build a hose assembly ordering number by combining the designators in the sequence shown below.
Typical Ordering Number

BALL & PLUG
VALVES
1 2 3 4 4 5 6 5 6
SS - FX 4 TA4 PM4 - 28 - F or 71CM-F
in. cm
DIAPHRAGM
BELLOWS,
VALVES
1 Material 4 End Connections 6 Options

End Connections See End Connection Designator For multiple options, add designators
SS = 316 stainless steel column in tables on next page. with a dash between each designator.
CHECK & RELIEF
A = Armor guard
VALVES
2 Hose 5 Overall Length F = Fire jacket

FX = F
X series high-pressure Inches in tenths or centimeters, in C = ASTM G93 Level C cleaning on
metal hose whole numbers. Include CM as shown hose wetted surfaces
for centimeter lengths. G = CGA 4.1 cleaning on hose
wetted surfaces
METERING
NEEDLE &
3 Nominal Hose Size, in.

VALVES
F1 = Thermosleeve
4 = 1/4 16 = 1
H7 =Helium leak test (1 × 10−7 std
6 = 3/8 20 = 1 1/4
cm3/s)
8 = 1/2 24 = 1 1/2
N3 = Nitrogen pressure test
12 = 3/4 32 = 2
INSTRUMENT
MANIFOLD
Z = 316L SS collar and braid

SYSTEMS
material
Mat Tags
MA = Gray MO = Orange
MB = Blue MP = Purple
MODULAR
SYSTEMD
MC = Brown MR = Red
MG = Green MW = White
MK = Black MY = Yellow
MN = Pink
Add 2 to the end of the Mat Tag
REGULATORS
& FILTERS
designator for two tags.

Example: MA2
Other Tags
T = Lanyard tag
MEASUREMENT
DEVICES
T2 = Two lanyard tags

T5 = Clamp tag
Specify text for tags. See Hose Tag
Text table, page 109.
MEDIUM- HIGH-
PRESSURE
See page 108 for detailed descriptions

of options.
REFERENCES
FITTINGS
TUBE
End Connections
Swagelok Tube Adapters
PIPE, WELD,
Dimensions
VCR, VCO
FITTINGS
Tube Nominal End Minimum Maximum
Adapter Hose Size Connection Inside Outside
Size Designator Designator A Diameter Dimension
Dimensions, in. (mm)
A
STANDARD
1/4 4 TA4 1.64 (41.7) 0.18 (4.6) 0.78 (19.8)
TUBING
1 in. and Under 3/8 6 TA6 1.81 (46.0) 0.27 (6.9) 1.01 (25.7)
1/2 8 TA8 2.28 (57.9) 0.37 (9.4) 1.08 (27.4)
3/4 12 TA12 2.62 (66.5) 0.58 (14.7) 1.50 (38.1)
1 16 TA16 2.99 (75.9) 0.80 (20.3) 1.79 (45.5)
FLEXIBLE
TUBING
HOSE /
1 1/4➀ 20 TA20 3.91 (99.3) 1.02 (25.9) 2.16 (54.9)
1 1/2➀ 24 TA24 4.47 (114) 1.25 (31.8) 2.59 (65.8)
A
2➀ 32 TA32 5.70 (145) 1.72 (43.7) 3.45 (87.6)
Preswaged
Dimensions, mm (in.)
Nuts and Ferrules—
BALL & PLUG

VALVES
Over 1 in. / 25 mm 6 4 TM6 42.2 (1.66) 4.1 (0.16) 19.8 (0.78)
8 4 TM8 42.4 (1.67) 5.6 (0.22) 19.8 (0.78)
10 6 TM10 53.3 (2.10) 7.1 (0.28) 25.7 (1.01)
12 8 TM12 67.9 (2.67) 8.9 (0.35) 27.4 (1.08)
DIAPHRAGM
18 12 TM18 64.0 14.0 38.1
BELLOWS,
(2.52) (0.55) (1.50)
VALVES
25 16 TM25 75.9 (2.99) 19.8 (0.78) 45.5 (1.79)
32➀ 20 TM32 87.4 (3.44) 26.4 (1.04) 57.4 (2.26)
38➀ 24 TM38 97.3 (3.83) 31.8 (1.25) 69.1 (2.72)
CHECK & RELIEF

➀ Furnished with nut, preswaged silver-plated front ferrule, and uncoated back ferrule which are required
VALVES
for performance above 450˚F (232˚C).
Swagelok Tube Fittings

Dimensions
METERING
NEEDLE &
Fitting Hose Size Connection Inside Outside
VALVES
A
1/4 4 SL4 1.99 (50.5) 0.19 (4.8) 0.78 (19.8)
3/8 6 SL6 2.07 (52.6) 0.28 (7.1) 1.01 (25.7)
INSTRUMENT
MANIFOLD
SYSTEMS
1/2 8 SL8 2.56 (65.0) 0.41 (10.4) 1.08 (27.4)
3/4 12 SL12 2.74 (69.6) 0.63 (16.0) 1.50 (38.1)
1 16 SL16 3.20 (81.3) 0.88 (22.4) 1.79 (45.5)
1 1/4➀ 20 SL20 3.79 (96.3) 1.09 (27.7) 2.10 (53.3)
MODULAR
SYSTEMD
1 1/2➀ 24 SL24 4.25 (108) 1.35 (34.3) 2.45 (62.2)
2➀ 32 SL32 5.47 (139) 1.82 (46.2) 3.17 (80.5)
6 4 SM6 50.5 (1.99) 4.8 (0.19) 19.8 (0.78)
REGULATORS
8 4 SM8 51.6 (2.03) 6.4 (0.25) 19.8 (0.78)
10 6 SM10 53.6 (2.11) 7.9 (0.31) 25.7 (1.01) & FILTERS
12 8 SM12 65.0 (2.56) 9.7 (0.38) 27.4 (1.08)
18 12 SM18 69.6 (2.74) 15.0 (0.59) 38.1 (1.50)
MEASUREMENT
25 16 SM25 81.3 (3.20) 21.8 (0.86) 45.5 (1.79)

DEVICES
32➀ 20 SM32 98.8 (3.89) 28.7 (1.13) 53.3 (2.10)

38➀ 24 SM38 111 (4.36) 33.8 (1.33) 63.2 (2.49)
➀ Furnished with nut, silver-plated front ferrule and uncoated back ferrule which are required for
performance above 450˚F (232˚C).
MEDIUM- HIGH-
PRESSURE
REFERENCES

FITTINGS
TUBE
Rotatable Male
VCR® Metal Gasket
Face Seal Fittings VCR Nominal End Minimum Maximum
Size Hose Size Connection Inside Outside
PIPE, WELD,
in. Designator Designator A Diameter Dimension

VCR, VCO
FITTINGS
1/4 4 RM4 1.81 (46) 0.18 (4.6) 0.78 (19.8)

1/2 8 RM8 2.13 (54.1) 0.40 (10.2) 1.08 (27.4)
A 3/4 12 RM12 2.75 (69.9) 0.63 (16.0) 1.51 (38.4)
1 16 RM16 2.97 (75.4) 0.88 (22.4) 1.88 (47.8)
STANDARD
TUBING
Rotatable Female
VCR Metal Gasket
FLEXIBLE
TUBING
HOSE /

1/4 4 RF4 1.81 (46) 0.18 (4.6) 0.87 (22.1)
SWAGELOK
1/2 8 RF8 2.13 (54.1) 0.40 (10.2) 1.23 (31.2)

3/4 12 RF12 2.75 (69.9) 0.63 (16.0) 1.73 (43.9)
BALL & PLUG
A
VALVES
1 16 RF16 2.97 (75.4) 0.88 (22.4) 2.02 (51.3)
Female VCO O-Ring

Face Seal Fittings
DIAPHRAGM
VCO Nominal End Minimum Maximum

BELLOWS,
VALVES

1/4 4 VF4 1.27 (32.3) 0.19 (4.8) 0.79 (20.1)
1/2 8 VF8 1.44 (36.6) 0.41 (10.4) 1.08 (27.4)
CHECK & RELIEF
A
3/4 12 VF12 1.69 (42.9) 0.63 (16.0) 1.73 (43.9)
VALVES
1 16 VF16 1.73 (43.9) 0.88 (22.4) 2.02 (51.3)
SAE 37° (JIC) Female

METERING
Swivel
NEEDLE &
VALVES
Swivel Nominal End Minimum Maximum

1/4 4 AS4 1.67 (42.4) 0.19 (4.8) 0.78 (19.8)
INSTRUMENT
3/8 6 AS6 1.79 (45.5) 0.28 (7.1) 1.01 (25.7)

MANIFOLD
SYSTEMS
A
1/2 8 AS8 2.08 (52.8) 0.39 (9.9) 1.08 (27.4)
3/4 12 AS12 2.39 (60.7) 0.61 (15.5) 1.50 (38.1)
1 16 AS16 2.64 (67.1) 0.84 (21.3) 1.79 (45.5)
MODULAR
SYSTEMD
REGULATORS
& FILTERS
MEASUREMENT
DEVICES
MEDIUM- HIGH-
PRESSURE
REFERENCES
FITTINGS
TUBE
Female Pipe Threads,
NPT
NPT Nominal End Minimum Maximum
PIPE, WELD,
VCR, VCO
FITTINGS
1/4 4 PF4 1.72 (43.7) 0.30 (7.6) 0.87 (22.1)
A 3/8 6 PF6 1.84 (46.7) 0.42 (10.7) 1.01 (25.7)
1/2 8 PF8 2.58 (65.5) 0.58 (14.7) 1.23 (31.2)
3/4 12 PF12 2.53 (64.3) 0.73 (18.5) 1.51 (38.4)
STANDARD
TUBING
1 16 PF16 2.92 (74.2) 0.95 (24.1) 1.88 (47.8)
1 1/2 24 PF24 3.28 (83.3) 1.50 (38.1) 2.74 (69.6)
Male Pipe Threads, NPT and
FLEXIBLE
TUBING
HOSE /
NPT and ISO/BSP Tapered ISO/BSP Dimensions, in. (mm)
(ISO 7) Tapered Nominal End Minimum Maximum
NPT
BALL & PLUG

VALVES
1/4 4 PM4 1.82 (46.2) 0.28 (7.1) 0.78 (19.8)
A
3/8 6 PM6 1.91 (48.5) 0.38 (9.7) 1.01 (25.7)
1/2 8 PM8 2.45 (62.2) 0.47 (11.9) 1.08 (27.4)
3/4 12 PM12 2.57 (65.3) 0.63 (16.0) 1.50 (38.1)
DIAPHRAGM
BELLOWS,
1 16 PM16 3.05 (77.5) 0.88 (22.4) 1.79 (45.5)
VALVES
1 1/4 20 PM20 3.14 (79.8) 1.09 (27.7) 2.10 (53.3)
1 1/2 24 PM24 3.38 (85.9) 1.34 (34.0) 2.45 (62.2)
2 32 PM32 3.88 (98.6) 1.81 (46.0) 2.92 (74.2)
CHECK & RELIEF

ISO/BSP Tapered
VALVES
1/4 4 MT4 1.82 (46.2) 0.28 (7.1) 0.78 (19.8)
3/8 6 MT6 1.91 (48.5) 0.38 (9.7) 1.01 (25.7)
1/2 8 MT8 2.45 (62.2) 0.47 (11.9) 1.08 (27.4)
3/4 12 MT12 2.57 (65.3) 0.63 (16.0) 1.50 (38.1)
METERING
NEEDLE &
VALVES
1 16 MT16 3.05 (77.5) 0.88 (22.4) 1.79 (45.5)
1 1/4 20 MT20 3.14 (79.8) 1.09 (27.7) 2.10 (53.3)
1 1/2 24 MT24 3.38 (85.9) 1.34 (34.0) 2.45 (62.2)
INSTRUMENT
MANIFOLD
SYSTEMS
Tube Butt Welds
Tube Dimensions, in. (mm)
Butt Weld Wall Nominal End Minimum Maximum
Size Thickness Hose Size Connection Inside Outside
in. in. Designator Designator A Diameter Dimension
MODULAR
SYSTEMD
A
1/4 0.035 4 TB4 1.77 (45.0) 0.18 (4.6) 0.78 (19.8)
0.75 in.
3/8 0.035 6 TB6 1.82 (46.2) 0.31 (7.9) 1.01 (25.7)
(19.0 mm) 1/2 0.049 8 TB8 2.17 (55.1) 0.40 (10.2) 1.08 (27.4)
3/4 0.049 12 TB12 2.27 (57.7) 0.65 (16.5) 1.50 (38.1)
REGULATORS
1 0.065 16 TB16 2.46 (62.5) 0.87 (22.1) 1.79 (45.5)
& FILTERS
MEASUREMENT
DEVICES
MEDIUM- HIGH-
PRESSURE
REFERENCES
FM Series Metal Hose

FITTINGS
TUBE
Features
■ All-metal hose promotes corrosion resistance. ■ Commonly used in high-temperature vacuum applications
■ 316L stainless steel annular convoluted core. and medium-pressure corrosive environments, or where
permeation is undesirable.
PIPE, WELD,
VCR, VCO
FITTINGS

vacuum to 3100 psig (213 bar). ■ Standard and custom assemblies available.
■ Single braid layer of 316L stainless steel promotes hose ■ Options include hose covers, hose tags, additional
pressure containment and exhibits strong performance in cleaning, and additional helium leak testing. See page 108
dynamic cycling applications. for details.
STANDARD
TUBING
■ End connections welded in accordance with ASME Boiler ■ For electrical properties, see page 5 for details.
and Pressure Vessel Code Section IX.
FLEXIBLE
TUBING
HOSE /
316L SS braid 316L SS core Weld 316 SS end

connections
BALL & PLUG
VALVES
DIAPHRAGM
BELLOWS,
VALVES
Technical Data
CHECK & RELIEF
VALVES
Working
Pressure at Minimum
Bend Radius
in. (cm)
METERING
NEEDLE &
VALVES
1/4 (6.4) 0.28 (7.1) 0.53 (13.5) 2.25 (5.72) 10.0 (25.4) 3100 (213) 12 400 (854) 0.29 (0.43)
3/8 (9.7) 0.42 (10.6) 0.69 (17.5) 3.00 (7.62) 12.0 (30.5) 2000 (137) 8 000 (551) 0.33 (0.49)
1/2 (12.7) 0.53 (13.5) 0.85 (21.6) 4.50 (11.4) 16.0 (40.6) 1800 (124) 7 200 (496) 0.45 (0.67)
INSTRUMENT
MANIFOLD
SYSTEMS
3/4 (19.0) 0.80 (20.3) 1.15 (29.1) 6.00 (15.2) 17.0 (43.2) –325 to 850 1500 (103) 6 000 (413) 0.62 (0.92)
1 (25.4) 1.03 (26.0) 1.45 (36.9) 6.75 (17.1) 20.0 (50.8) (–200 to 454) 1200 (82.6) 4 800 (330) 0.77 (1.15)
1 1/4 (31.8) 1.30 (33.0) 1.77 (45.0) 4.50 (11.4) 23.0 (58.4) 950 (65.4) 3 800 (261) 1.05 (1.56)
1 1/2 (38.1) 1.53 (38.9) 2.02 (51.3) 5.25 (13.3) 26.0 (66.0) 900 (62.0) 3 600 (248) 1.18 (1.76)
MODULAR
SYSTEMD
2 (50.8) 2.05 (52.1) 2.57 (65.3) 6.75 (17.1) 32.0 (81.3) 500 (34.4) 2 000 (137) 1.66 (2.47)
REGULATORS
Ratings are based on ASME Code for Pressure Piping, B31.1 Power Piping, and ASME Boiler and Pressure Vessel Code.
& FILTERS
Temperature, °F (°C) Working Pressure, vacuum to ... psig (bar)
–325 (–200) to 100 (37) 3100 2000 (137) 1800 1500 (103) 1200 (82.6) 950 900 (62.0) 500
MEASUREMENT
(213) (124) (65.4) (34.4)

DEVICES
200 (93) 2604 (179) 1680 (115) 1512 (104) 1260 (86.8) 1008 (69.4) 798 (54.9) 756 (52.0) 420 (28.9)
300 (148) 2356 (162) 1520 (104) 1368 (94.2) 1140 (78.5) 912 (62.8) 722 (49.7) 684 (47.1) 380 (26.1)
400 (204) 2170 (149) 1400 (96.4) 1260 (86.8) 1050 (72.3) 840 (57.8) 665 (45.8) 630 (43.4) 350 (24.1)
500 (260) 2015 (138) 1300 (89.5) 1170 (80.6) 975 (67.1) 780 (53.7) 618 (42.5) 585 (40.3) 325 (22.3)
600 (315) 1922 (132) 1240 (85.4) 1116 (76.8) 930 (64.0) 744 (51.2) 589 (40.5) 558 (38.4) 310 (21.3)
MEDIUM- HIGH-
700 1829 1180 1062 885 (60.9) 708 561 531 (36.5) 295
PRESSURE
(371) (126) (81.3) (73.1) (48.7) (38.6) (20.3)

800 (426) 1767 (121) 1140 (78.5) 1026 (70.6) 855 (58.9) 684 (47.1) 542 (37.3) 513 (35.3) 285 (19.6)
850 (454) 1736 (119) 1120 (77.1) 1008 (69.4) 840 (57.8) 672 (46.3) 532 (36.6) 504 (34.7) 280 (19.2)
REFERENCES
FITTINGS
TUBE
Every Swagelok FM series hose Swagelok FM series hose components hose to pressure surges, shock,
to a maximum leak rate of 1 × 10 –5 Swagelok Standard Cleaning and pressure is greater than 50 % of
PIPE, WELD,
VCR, VCO
FITTINGS
bagged, and boxed.
STANDARD
TUBING
Ordering Information and Dimensions
Standard Length Hose Assemblies L
FLEXIBLE
Select an ordering number.
TUBING
HOSE /
OAL
BALL & PLUG

VALVES
Swagelok Tube Fitting to Male NPT End Connection
Dimensions
Nominal Tube Overall Live Minimum Maximum
Hose Fitting NPT Length Length Inside Outside
DIAPHRAGM
BELLOWS,
VALVES
Size Size Size OAL Ordering L Diameter Dimension
in. in. in. in. (cm) Number in. (cm) in. (mm) in. (mm)
12.0 (30.5) SS-FM4SL4PM4-12 8.26 (21.0) 0.19
1/4 1/4 1/4 0.95 (24.1)
36.0 (91.4) SS-FM4SL4PM4-36 32.3 (82.0) (4.8)
CHECK & RELIEF

18.0 (45.7) SS-FM6SL6PM6-18 14.2 (36.1) 0.28
3/8 3/8 3/8 1.09 (27.7)
VALVES
36.0 (91.4) SS-FM6SL6PM6-36 32.2 (81.8) (7.1)
18.0 (45.7) SS-FM8SL8PM8-18 13.6 (34.5) 0.41
1/2 1/2 1/2 1.23 (31.2)
48.0 (122) SS-FM8SL8PM8-48 43.6 (111) (10.4)
0.66
3/4 3/4 3/4 18.0 (45.7) SS-FM12SL12PM12-18 13.4 (34.0) 1.74 (44.2)
METERING
NEEDLE &
VALVES
(16.0)
Swagelok Tube Fitting End Connections
INSTRUMENT
MANIFOLD
SYSTEMS
Dimensions
Hose Fitting Length Length Inside Outside
Size Size OAL Ordering L Diameter Dimension
in. in. in. (cm) Number in. (cm) in. (mm) in. (mm)
MODULAR
SYSTEMD
12.0 (30.5) SS-FM4SL4SL4-12 8.12 (20.6) 0.19
1/4 1/4 0.95 (24.1)
36.0 (91.4) SS-FM4SL4SL4-36 32.1 (81.5) (4.8)
18.0 (45.7) SS-FM6SL6SL6-18 14.0 (35.6) 0.28
3/8 3/8 1.09 (27.7)
36.0 (91.4) SS-FM6SL6SL6-36 32.0 (81.3) (7.1)
REGULATORS
& FILTERS
18.0 (45.7) SS-FM8SL8SL8-18 13.5 (34.3) 0.41
1/2 1/2 1.23 (31.2)
48.0 (122) SS-FM8SL8SL8-48 43.5 (110) (10.4)
18.0 (45.7) SS-FM12SL12SL12-18 13.3 (33.8) 0.66
3/4 3/4 1.74 (44.2)
48.0 (122) SS-FM12SL12SL12-48 43.3 (110) (16.0)
MEASUREMENT
0.88
DEVICES
1 1 24.0 (61.0) SS-FM16SL16SL16-24 18.7 (47.5) 2.03 (51.6)

(22.4)
MEDIUM- HIGH-
PRESSURE
REFERENCES

FITTINGS
TUBE
Swagelok Tube Adapter End Connections
Dimensions
PIPE, WELD,
VCR, VCO
FITTINGS
Hose Adapter Length Length Inside Outside

Size Size OAL Ordering L Diameter Dimension
in. in. in. (cm) Number in. (cm) in. (mm) in. (mm)
12.0 (30.5) SS-FM4TA4TA4-12 8.48 (21.5)
24.0 (61.0) SS-FM4TA4TA4-24 20.5 (52.1) 0.16 0.75
1/4 1/4
STANDARD
(4.1) (19.0)
TUBING
36.0 (91.4) SS-FM4TA4TA4-36 32.5 (82.6)

48.0 (122) SS-FM4TA4TA4-48 44.5 (113)
A
FLEXIBLE
TUBING
HOSE /
BALL & PLUG
VALVES


DIAPHRAGM
BELLOWS,
VALVES
1 2 3 4 4 5 6 5 6
SS - FM 4 TA4 PM4 - 28 - F or 71CM-F
in. cm
CHECK & RELIEF
VALVES

C=A
METERING
STM G93 Level C cleaning on

NEEDLE &
VALVES
2 Hose 5 Overall Length hose wetted surfaces

FM = FM series metal hose Inches or centimeters, in whole F = Fire jacket
numbers. Include CM as shown for F1 = Thermosleeve
3 Nominal Hose Size, in. centimeter lengths. H7 =Helium leak test (1 × 10−7 std
INSTRUMENT
MANIFOLD
SYSTEMS
4 = 1/4 16 = 1 cm3/s)
6 = 3/8 20 = 1 1/4 N3 = Nitrogen pressure test
8 = 1/2 24 = 1 1/2 S =302 SS spring guard, hose-
12 = 3/4 32 = 2 length (1/4, 3/8, and 1/2 in.
sizes only)
MODULAR
SYSTEMD
W = Hydrostatic test
Mat Tags
REGULATORS
MC = Brown MR = Red
& FILTERS
MN = Pink
MEASUREMENT

DEVICES
Example: MA2
Other Tags
T = Lanyard tag
MEDIUM- HIGH-

PRESSURE
T5 = Clamp tag
See page 108 for detailed descriptions
REFERENCES
of options.
FITTINGS
TUBE
End Connections
Dimensions
PIPE, WELD,
VCR, VCO
FITTINGS
A Dimensions, in. (mm)
Cap Weld Style— 1/4 4 TA4 1.76 (44.7) 0.16 (4.1) 0.75 (19.0)
1 in. and Under
STANDARD
3/8 6 TA6 1.82 (46.2) 0.27 (6.9) 0.93 (23.6)
TUBING
1/2 8 TA8 2.22 (56.4) 0.37 (9.4) 1.05 (26.7)
3/4 12 TA12 2.35 (59.7) 0.58 (14.7) 1.38 (35.1)
1 16 TA16 2.69 (68.3) 0.80 (20.3) 1.69 (42.9)
1 1/4➀ 20 TA20 4.16 (106) 1.01 (25.7) 2.16 (54.9)
FLEXIBLE
TUBING
HOSE /
1 1/2➀ 24 TA24 4.97 (126) 1.24 (31.5) 2.59 (65.8)
Manual Weld Style— 2➀ 32 TA32 5.95 (151) 1.71 (43.4) 3.45 (87.6)
Over 1 in. Dimensions, mm (in.)
6 4 TM6 44.4 (1.75) 4.1 (0.16) 19.0 (0.75)
BALL & PLUG

VALVES
10 6 TM10 47.0 (1.85) 7.1 (0.28) 23.5 (0.93)
12 8 TM12 57.2 (2.25) 8.9 (0.35) 26.7 (1.05)
DIAPHRAGM
BELLOWS,
VALVES
Dimensions
CHECK & RELIEF

VALVES
A 1/4 4 SL4 1.94 (49.3) 0.19 (4.8) 0.95 (24.1)
Cap Weld Style— 4 SL6 2.00 (50.8) 0.95 (24.1)
1 in. and Under 3/8 0.28 (7.1)
6 SL6 2.02 (51.3) 1.09 (27.7)
1/2 8 SL8 2.24 (56.9) 0.41 (10.4) 1.23 (31.2)
METERING
5/8 8 SL10 2.27 (57.7) 0.50 0.95
NEEDLE &
(12.7) (24.1)
VALVES
3/4 12 SL12 2.35 (59.7) 0.63 (16.0) 1.74 (44.2)
1 16 SL16 2.64 (67.1) 0.88 (22.4) 2.03 (51.6)
1 1/4➀ 20 SL20 4.04 (103) 1.09 (27.7) 2.23 (58.9)
A
1 1/2➀ 24 SL24 4.75 (121) 1.34 (34.0) 2.61 (66.3)
INSTRUMENT
MANIFOLD
SYSTEMS
Manual Weld Style—
2➀ 32 SL32 5.72 (145) 1.88 (47.8) 3.48 (88.4)
Over 1 in.
6 4 SM6 30.2 (1.19) 4.8 (0.19) 20.6 (0.81)
8 4 SM8 50.3 (1.98) 6.4 (0.25) 20.6 (0.81)
MODULAR
SYSTEMD
10 6 SM10 51.6 (2.03) 7.9 (0.31) 27.9 (1.10)
12 8 SM12 59.7 (2.35) 9.7 (0.38) 31.3 (1.23)
➀ Furnished with silver-plated front ferrule and uncoated back ferrule which are required for performance
above 450˚F (232˚C).
REGULATORS
& FILTERS
Rotatable Male
VCR® Metal Gasket
MEASUREMENT

DEVICES

1/4 4 RM4 2.60 (66.0) 0.18 (4.6) 0.73 (18.4)
1/2 8 RM8 2.83 (71.9) 0.40 (10.2) 1.09 (27.7)
3/4 12 RM12 4.19 (106) 0.65 (16.5) 1.52 (38.7)
MEDIUM- HIGH-
A
PRESSURE
1 16 RM16 4.80 (122) 0.87 (22.1) 1.89 (47.9)

REFERENCES

FITTINGS
TUBE
Rotatable Female
VCR Metal Gasket
PIPE, WELD,
VCR, VCO
FITTINGS
1/4 4 RF4 2.00 (50.8) 0.18 (4.6) 0.87 (22.1)

1/2 8 RF8 2.16 (54.9) 0.40 (10.2) 1.23 (31.2)
3/4 12 RF12 4.15 (105) 0.65 (16.5) 1.74 (44.2)
A
1 16 RF16 4.76 (121) 0.87 (22.1) 2.03 (51.6)
STANDARD
TUBING
Female VCO® O-Ring

Face Seal Fittings
FLEXIBLE
TUBING
HOSE /

1/4 4 VF4 2.00 (50.8) 0.18 (4.6) 0.80 (20.3)
1/2 8 VF8 2.14 (54.4) 0.40 (10.2) 1.16 (29.5)
A
BALL & PLUG
VALVES

Swivel
DIAPHRAGM
BELLOWS,
VALVES

1/4 4 AS4 1.87 (47.5) 0.17 (4.3) 0.94 (23.9)
3/8 6 AS6 1.97 (50.0) 0.28 (7.1) 1.09 (27.7)
A
CHECK & RELIEF
1/2 8 AS8 2.15 (54.6) 0.42 (10.7) 1.23 (31.2)

VALVES

NPT
METERING
NEEDLE &

VALVES

1/4 4 PF4 1.81 (46.0) 0.28 (7.1) 0.94 (23.9)
3/8 6 PF6 1.87 (47.5) 0.38 (9.7) 1.09 (27.7)
INSTRUMENT
A
MANIFOLD
SYSTEMS
1/2 8 PF8 2.18 (55.4) 0.47 (11.9) 1.23 (31.2)

3/4 12 PF12 2.21 (56.1) 0.72 (18.3) 1.74 (44.2)
MODULAR
SYSTEMD
REGULATORS
& FILTERS
MEASUREMENT
DEVICES
MEDIUM- HIGH-
PRESSURE
REFERENCES
FITTINGS
TUBE
PIPE, WELD,
VCR, VCO
FITTINGS
NPT
4 PM4 1.80 (45.7) 0.28 (7.1) 0.94 (23.9)
1/4
A 6 PM4 1.81 (46.0) 0.28 (7.1) 1.09 (27.7)
Cap Weld Style— 3/8 6 PM6 1.81 (46.0) 0.38 (9.7) 1.09 (27.7)
STANDARD
TUBING
1 in. and Under 4 PM8 1.99 (50.5) 0.47 (11.9) 1.02 (25.8)
1/2
8 PM8 2.15 (54.6) 0.47 (11.9) 1.23 (31.2)
3/4 12 PM12 2.22 (56.4) 0.63 (16.0) 1.74 (44.2)
1 16 PM16 2.54 (64.5) 0.88 (22.4) 2.03 (51.6)
FLEXIBLE
TUBING
HOSE /
1 1/4 20 PM20 3.06 (77.7) 1.09 (27.7) 2.03 (51.6)
1 1/2 24 PM24 3.72 (94.5) 1.34 (34.0) 2.47 (62.6)
2 32 PM32 4.19 (106) 1.81 (46.0) 3.19 (81.0)
A
ISO/BSP Tapered
BALL & PLUG

Manual Weld Style— 1/4 4 MT4 1.80 (45.7) 0.28 (7.1) 0.94 (23.9)
VALVES
Over 1 in.
1/2 8 MT8 2.16 (54.9) 0.47 (11.9) 1.23 (31.2)
DIAPHRAGM
BELLOWS,
Tube Butt Welds
VALVES
CHECK & RELIEF

1/4 0.035 4 TB4 1.90 (48.3) 0.18 (4.6) 0.75 (19.0)
VALVES
A
3/8 0.035 6 TB6 1.89 (48.0) 0.31 (7.9) 0.93 (23.6)
0.75 in.
(19.0 mm) 1/2 0.049 8 TB8 2.04 (51.8) 0.40 (10.2) 1.05 (26.7)
3/4 0.049 12 TB12 2.12 (53.8) 0.65 (16.5) 1.38 (35.1)
1 0.065 16 TB16 2.23 (56.6) 0.87 (22.1) 1.69 (42.9)
METERING
NEEDLE &
VALVES
INSTRUMENT
MANIFOLD
SYSTEMS
MODULAR
SYSTEMD
REGULATORS
& FILTERS
MEASUREMENT
DEVICES
MEDIUM- HIGH-
PRESSURE
REFERENCES
FJ Series Metal Hose

FITTINGS
TUBE
Features
■ General purpose all-metal hose. ■ Optional 316L stainless steel braid available to provide
■ 316L stainless steel annular convoluted core. greater corrosion resistance.
PIPE, WELD,
■ Commonly used in high-temperature vacuum or general

VCR, VCO
FITTINGS

vacuum to 1600 psig (110 bar). purpose applications where permeation is undesirable.
■ Single braid layer of 304 stainless steel promotes hose ■ Custom assemblies available.
pressure containment. ■ Options include hose covers, hose tags, additional
cleaning, and additional helium leak testing. See page 108
STANDARD

TUBING
and Pressure Vessel Code Section IX. for details.

■ For electrical properties, see page 5 for details.
304 SS braid 316L SS core Weld 316 SS

FLEXIBLE
TUBING
HOSE /
end connections
BALL & PLUG
VALVES
DIAPHRAGM
BELLOWS,
VALVES
Technical Data
CHECK & RELIEF
Working
VALVES
Pressure at Minimum
Bend Radius
in. (cm)
METERING
NEEDLE &
VALVES
1/4 (6.4) 0.25 (6.4) 0.42 (10.7) 1.00 (2.54) 4.33 (11.0) 1600 (110) 6400 (440) 0.11 (0.16)
3/8 (9.7) 0.38 (9.5) 0.61 (15.5) 1.20 (3.05) 5.91 (15.0) 1470 (101) 5880 (405) 0.20 (0.30)
1/2 (12.7) 0.50 (12.7) 0.74 (18.8) 1.50 (3.81) 6.50 (16.5) 1110 (76.4) 4440 (306) 0.22 (0.33)
3/4 (19.0) 0.75 (19.0) 1.09 (27.7) 2.10 (5.33) 8.86 (22.5) –325 to 800 860 (59.2) 3440 (237) 0.37 (0.55)
INSTRUMENT
MANIFOLD
SYSTEMS
1 (25.4) 1.00 (25.4) 1.38 (35.1) 2.70 (6.86) 10.2 (25.9) (–200 to 426) 680 (46.8) 2720 (187) 0.50 (0.74)
1 1/4 (31.8) 1.25 (31.8) 1.67 (42.4) 3.10 (7.87) 11.8 (30.0) 680 (46.8) 2720 (187) 0.61 (0.91)
1 1/2 (38.1) 1.50 (38.1) 1.99 (50.5) 3.90 (9.91) 13.4 (34.0) 520 (35.8) 2080 (143) 0.85 (1.26)
2 (50.8) 2.00 (50.8) 2.51 (63.8) 5.10 (13.0) 15.4 (39.1) 450 (31.0) 1800 (124) 1.10 (1.65)
MODULAR
SYSTEMD
Ratings are based on ASME Code for Pressure Piping B31.3, Process Piping.
REGULATORS
& FILTERS
Temperature °F (°C) Working Pressure, vacuum to ... psig (bar)
–325 (–200) to 300 (148) 1600 (110) 1470 (101) 1110 (76.4) 860 (59.2) 680 (46.8) 680 (46.8) 520 (35.8) 450 (31.0)
400 (204) 1488 (102) 1367 (94.1) 1032 (71.1) 800 (55.1) 632 (43.5) 632 (43.5) 484 (33.3) 419 (28.8)
MEASUREMENT
500 (260) 1376 (94.8) 1264 (87.0) 955 (65.7) 740 (50.9) 585 (40.3) 585 (40.3) 447 (30.7) 387 (26.6)
DEVICES
600 (315) 1296 (89.2) 1191 (82.0) 899 (61.9) 697 (48.0) 551 (37.9) 551 (37.9) 421 (29.0) 365 (25.1)
700 (371) 1232 (84.8) 1132 (77.9) 855 (58.9) 662 (45.6) 524 (36.1) 524 (36.1) 400 (27.5) 347 (23.9)
750 (398) 1200 (82.6) 1103 (75.9) 833 (57.3) 645 (44.4) 510 (35.1) 510 (35.1) 390 (26.8) 338 (23.2)
800 (426) 1184 (81.5) 1088 (74.9) 821 (56.5) 636 (43.8) 503 (34.6) 503 (34.6) 385 (26.5) 333 (22.9)
MEDIUM- HIGH-
PRESSURE
REFERENCES
FITTINGS
TUBE
Every Swagelok FJ series hose Swagelok FJ series hose components hose to pressure surges, shock,
to a maximum leak rate of 1 × 10 –5 Swagelok Standard Cleaning and pressure is greater than 50 % of
PIPE, WELD,
VCR, VCO
FITTINGS
bagged, and boxed.
STANDARD
TUBING
FLEXIBLE
TUBING
HOSE /
BALL & PLUG

1 2 3 4 4 5 6 5 6
VALVES
SS - FJ 4 TA4 PM4 - 28 - F or 71CM-F
in. cm
DIAPHRAGM
BELLOWS,
VALVES
A = Armor guard
CHECK & RELIEF

2 Hose 5 Overall Length F = Fire jacket
VALVES
FJ = FJ series metal hose Inches or centimeters, in whole C = ASTM G93 Level C cleaning on
numbers. Include CM as shown for hose wetted surfaces
3 Nominal Hose Size, in. centimeter lengths. G = CGA 4.1 cleaning on hose
4 = 1/4 16 = 1 wetted surfaces
F1 = Thermosleeve
METERING
NEEDLE &
6 = 3/8 20 = 1 1/4
VALVES
8 = 1/2 24 = 1 1/2 H7 =Helium leak test (1 × 10−7 std
12 = 3/4 32 = 2 cm3/s)
INSTRUMENT
MANIFOLD
SYSTEMS
Z = 316L SS braid material
093 = ECE R110 approval, only
on select end connections.
See page 110 for additional
information.
MODULAR
SYSTEMD
Mat Tags
MC = Brown MR = Red
REGULATORS
MK = Black MY = Yellow & FILTERS
MN = Pink
MEASUREMENT
Example: MA2
DEVICES
Other Tags
T = Lanyard tag
MEDIUM- HIGH-
T5 = Clamp tag
PRESSURE

of options.
REFERENCES

FITTINGS
TUBE
End Connections
Dimensions
PIPE, WELD,

VCR, VCO
FITTINGS

A 1/4 4 TA4 1.82 (46.2) 0.18 (4.6) 0.76 (19.2)
Cap Weld Style—
STANDARD
3/8 6 TA6 1.81 (46.0) 0.27 (6.9) 0.78 (19.8)

TUBING
1/4 and 1/2 in.

1/2 8 TA8➁ 2.26 (57.4) 0.37 (9.4) 1.05 (26.7)
3/4 12 TA12➁ 2.50 (63.5) 0.58 (14.7) 1.32 (33.5)
1 16 TA16 2.99 (75.9) 0.80 (20.3) 1.63 (41.4)
1 1/4➀ 20 TA20 3.91 (99.3) 1.02 (25.9) 2.18 (55.2)
FLEXIBLE
TUBING
HOSE /
A 1 1/2➀ 24 TA24 4.47 (114) 1.25 (31.8) 2.61 (66.3)

Manual Weld Style— 2➀ 32 TA32 5.45 (138) 1.72 (43.7) 3.48 (88.4)
1 in. and Under
6 4 TM6 39.0 (1.54) 4.1 (0.16) 13.7 (0.54)
BALL & PLUG
VALVES
8 4 TM8 39.2 (1.54) 5.6 (0.22) 13.7 (0.54)

10 6 TM10 53.3 (2.10) 7.1 (0.28) 19.8 (0.78)
12 8 TM12➁ 64.8 (2.55) 8.9 (0.35) 25.5 (1.00)
A
18 12 TM18➁ 61.0 (2.40) 14.0 (0.55) 33.5 (1.32)
DIAPHRAGM
25 16 TM25 75.9 (2.99) 19.8 (0.78) 41.4 (1.63)

BELLOWS,
VALVES
Preswaged
Nuts and Ferrules— 32➀ 20 TM32 87.4 (3.44) 26.4 (1.04) 58.0 (2.28)
Over 1 in. / 25 mm 38➀ 24 TM38 97.3 (3.83) 31.8 (1.25) 69.6 (2.74)
CHECK & RELIEF
➁ ECE R110 approval available.

VALVES

Dimensions
METERING
NEEDLE &

VALVES

A 1/4 4 SL4 2.08 (52.8) 0.19 (4.8) 0.94 (23.8)
Cap Weld Style— 3/8 6 SL6 2.07 (52.6) 0.28 (7.1) 0.80 (20.3)
INSTRUMENT
MANIFOLD
SYSTEMS
1/4 and 1/2 in.

1/2 8 SL8 2.28 (57.9) 0.41 (10.4) 1.23 (31.2)
3/4 12 SL12 2.62 (66.6) 0.63 (16.0) 1.32 (33.5)
1 16 SL16 3.20 (81.3) 0.88 (22.4) 1.63 (41.4)
1 1/4➀ 20 SL20 3.79 (96.3) 1.09 (27.7) 2.03 (51.6)
MODULAR
SYSTEMD
1 1/2➀ 24 SL24 4.25 (108) 1.35 (34.3) 2.47 (65.6)

A 2➀ 32 SL32 5.22 (133) 1.82 (46.2) 3.19 (81.0)
Manual Weld Style— Dimensions, mm (in.)
All other sizes 6 4 SM6 47.5 (1.87) 4.8 (0.19) 16.2 (0.64)
REGULATORS
8 4 SM8 48.3 (1.90) 6.4 (0.25) 17.4 (0.69)

& FILTERS
10 6 SM10 53.3 (2.10) 7.9 (0.31) 20.9 (0.82)

12 8 SM12 61.7 (2.43) 9.7 (0.38) 25.5 (1.00)
18 12 SM18 66.5 (2.62) 15.0 (0.59) 31.3 (1.23)
25 16 SM25 81.3 (3.20) 21.8 (0.86) 40.5 (1.60)
MEASUREMENT
DEVICES
32➀ 20 SM32 97.8 (3.85) 28.7 (1.13) 53.4 (2.10)

38➀ 24 SM38 111 (4.36) 33.8 (1.33) 63.8 (2.51)
➀ Furnished with silver-plated front ferrule and uncoated back ferrule which are required for
performance above 450˚F (232˚C).
MEDIUM- HIGH-
PRESSURE
REFERENCES
FITTINGS
TUBE
Rotatable Male VCR Metal
Gasket Face Seal Fittings
VCR Nominal End Minimum Maximum
PIPE, WELD,
VCR, VCO
FITTINGS
1/4 4 RM4 1.69 (42.9) 0.18 (4.6) 0.73 (18.4)
A
1/2 8 RM8 2.00 (50.8) 0.40 (10.2) 1.09 (27.7)
3/4 12 RM12 2.63 (66.8) 0.63 (16.0) 1.52 (38.7)
1 16 RM16 2.97 (75.4) 0.88 (22.4) 1.89 (47.9)
STANDARD
TUBING
FLEXIBLE
TUBING
HOSE /
Rotatable Female VCR Metal
BALL & PLUG

VALVES
SWAGELOK
1/4 4 RF4 2.09 (53.1) 0.18 (4.6) 0.87 (22.1)

A 1/2 8 RF8 2.00 (50.8) 0.40 (10.2) 1.23 (31.2)
3/4 12 RF12 2.63 (66.8) 0.63 (16.0) 1.74 (44.2)
DIAPHRAGM
BELLOWS,
1 16 RF16 2.97 (75.4) 0.88 (22.4) 2.03 (51.6)
VALVES
CHECK & RELIEF
VALVES
Female VCO O-Ring Face
Seal Fittings
METERING
NEEDLE &
VALVES
1/4 4 VF4 1.15 (29.2) 0.19 (4.8) 0.80 (20.3)
A 1/2 8 VF8 1.31 (33.3) 0.41 (10.4) 1.16 (29.5)
Cap Weld Style— 3/4 12 VF12 1.57 (39.9) 0.63 (16.0) 1.74 (44.2)
INSTRUMENT
MANIFOLD
1/4 and 1/2 in.
SYSTEMS
1 16 VF16 1.73 (43.9) 0.88 (22.4) 2.03 (51.6)
A
MODULAR
SYSTEMD
All other sizes
SAE 37° (JIC) Female Swivel

REGULATORS
& FILTERS
A
1/4 4 AS4 2.01 (51.2) 0.19 (4.8) 0.94 (23.8)
Cap Weld Style—
1/4 and 1/2 in. 3/8 6 AS6 1.79 (45.5) 0.28 (7.1) 0.80 (20.3)
MEASUREMENT
DEVICES
1/2 8 AS8 2.21 (53.6) 0.39 (9.9) 1.23 (31.2)

3/4 12 AS12 2.27 (57.7) 0.61 (15.5) 1.45 (36.8)
1 16 AS16 2.64 (67.1) 0.84 (21.3) 1.74 (44.2)
A
MEDIUM- HIGH-
All other sizes

PRESSURE
REFERENCES

FITTINGS
TUBE

NPT
PIPE, WELD,

VCR, VCO
FITTINGS
1/4 4 PF4 1.74 (44.2) 0.30 (7.6) 0.94 (23.8)

A
A
3/8 6 PF6 1.84 (46.7) 0.42 (10.7) 1.02 (25.8)
Cap Weld Style—
1/4 and 1/2 in. 1/2 8 PF8 2.11 (53.6) 0.58 (14.7) 1.23 (31.2)
3/4 12 PF12 2.41 (61.2) 0.73 (18.5) 1.52 (38.7)
STANDARD
TUBING
1 16 PF16 2.92 (74.2) 0.95 (24.1) 1.89 (47.9)

1 1/2 24 PF24 3.28 (83.3) 1.50 (38.1) 2.76 (70.0)
A
All other sizes
FLEXIBLE
TUBING
HOSE /

(ISO 7)
BALL & PLUG
Tapered Nominal End Minimum Maximum

VALVES

NPT
1/4 4 PM4 1.94 (49.3) 0.28 (7.1) 0.94 (23.8)
DIAPHRAGM
A 3/8 6 PM6 1.91 (48.5) 0.38 (9.7) 0.80 (20.3)

BELLOWS,
VALVES
Cap Weld Style— 1/2 8 PM8 2.32 (58.9) 0.47 (11.9) 1.23 (31.2)
1/4 and 1/2 in. 3/4 12 PM12 2.45 (62.2) 0.63 (16.0) 1.32 (33.5)
1 16 PM16 3.05 (77.5) 0.88 (22.4) 1.63 (41.4)
CHECK & RELIEF
1 1/4 20 PM20 3.14 (79.8) 1.09 (27.7) 2.03 (51.6)

VALVES
1 1/2 24 PM24 3.38 (85.9) 1.34 (34.0) 2.47 (62.6)

A 2 32 PM32 3.63 (92.2) 1.81 (46.0) 2.76 (70.0)
Manual Weld Style— ISO/BSP Tapered
All other sizes 1/4 4 MT4 1.94 (49.3) 0.28 (7.1) 0.94 (23.8)
METERING
NEEDLE &
3/8 6 MT6 1.91 (48.5) 0.38 (9.7) 0.80 (20.3)

VALVES
1/2 8 MT8 2.32 (58.9) 0.47 (11.9) 1.23 (31.2)

3/4 12 MT12 2.45 (62.2) 0.63 (16.0) 1.32 (33.5)
1 16 MT16 3.05 (77.5) 0.88 (22.4) 1.63 (41.4)
INSTRUMENT
1 1/4 20 MT20 3.14 (79.8) 1.09 (27.7) 2.03 (51.6)

MANIFOLD
SYSTEMS
1 1/2 24 MT24 3.38 (85.9) 1.34 (34.0) 2.47 (62.6)
Tube Butt Welds Dimensions, in. (mm)

MODULAR
Tube
SYSTEMD

1/4 0.035 4 TB4 1.96 (49.8) 0.18 (4.6) 0.76 (19.2)
A
REGULATORS
3/8 0.035 6 TB6 1.82 (46.2) 0.31 (7.9) 0.78 (19.8)

& FILTERS
0.75 in.
(19.0 mm) 1/2 0.049 8 TB8 2.11 (53.6) 0.40 (10.2) 1.05 (26.7)
Cap Weld Style— 3/4 0.049 12 TB12 2.14 (54.4) 0.65 (16.5) 1.32 (33.5)
1/4 and 1/2 in. 1 0.065 16 TB16 2.46 (62.5) 0.87 (22.1) 1.63 (41.4)
MEASUREMENT
DEVICES
A
0.75 in.
MEDIUM- HIGH-
(19.0 mm)
PRESSURE

All other sizes
REFERENCES
FL Series Metal Hose
FITTINGS
TUBE
Features
■ Highly flexible all-metal hose. ■ Exhibits strong performance in dynamic cycling
■ 316L stainless steel annular convoluted core. applications.
PIPE, WELD,
■ Commonly used in high-temperature vacuum and general
VCR, VCO
FITTINGS
■ Size range of 1/4 through 2 in. sizes and working pressures
from vacuum to 1500 psig (103 bar). purpose dynamic-cycling applications.
■ Single braid layer of 321 stainless steel for sizes 1/4 and ■ Standard and custom assemblies available.
1/2 in. and 316L stainless steel for all other sizes ensures ■ Options include hose covers, hose tags, additional
hose pressure containment. cleaning, and additional helium leak testing. See page 108
STANDARD
TUBING
■ End connections welded in accordance with ASME Boiler for details.
and Pressure Vessel Code Section IX. ■ For electrical properties, see page 5 for details.
FLEXIBLE
321 SS braid/
TUBING
HOSE /
316L SS braid 316L SS core Weld 316 SS
end connections
BALL & PLUG

VALVES
DIAPHRAGM
BELLOWS,
VALVES
Technical Data
CHECK & RELIEF

VALVES
Working
Pressure at Minimum
Bend Radius
in. (cm)
METERING
NEEDLE &
VALVES
1/4 (6.4) 0.24 (6.1) 0.47 (11.9) 1.00 (2.54) 5.50 (14.0) 1500 (103) 6000 (413) 0.12 (0.18)
3/8 (9.5) 0.26 (6.6) 0.70 (17.8) 1.00 (2.54) 4.00 (10.2) 1470 (101) 5880 (405) 0.21 (0.31)
1/2 (12.7) 0.47 (11.9) 0.82 (20.8) 1.75 (4.45) 7.00 (17.8) 1200 (82.6) 4800 (330) 0.24 (0.36)
INSTRUMENT
3/4 (19.0) 0.77 (19.6) 1.21 (30.7) 1.70 (4.32) 6.40 (16.3) 860 (59.3) 3440 (237) 0.47 (0.70)
MANIFOLD
SYSTEMS
–325 to 850
1 (25.4) 1.02 (25.9) 1.53 (38.9) 2.10 (5.33) 7.10 (18.0) (–200 to 454) 680 (46.8) 2720 (187) 0.64 (0.96)
1 1/4 (31.8) 1.28 (32.5) 1.83 (46.5) 2.50 (6.35) 7.90 (20.1) 645 (44.4) 2580 (178) 0.99 (1.48)
1 1/2 (38.1) 1.56 (39.6) 2.15 (54.6) 3.10 (7.87) 11.0 (27.9) 520 (35.8) 2080 (143) 1.16 (1.74)
2 (50.8) 2.02 (51.3) 2.68 (68.1) 4.00 (10.2) 13.0 (33.0) 380 (26.2) 1520 (105) 1.48 (2.22)
MODULAR
SYSTEMD
REGULATORS
Piping, B31.1 Power Piping, and ASME Boiler & FILTERS
and Pressure Vessel Code.
MEASUREMENT

DEVICES

–325 (–200) to 100 (37) 1500 (103) 1470 (101) 1200 (82.7) 860 (59.2) 680 (46.8) 645 (44.4) 520 (35.8) 380 (26.1)
200 (93) 1260 (86.8) 1235 (85.0) 1008 (69.4) 722 (49.7) 571 (39.3) 542 (37.3) 437 (30.1) 319 (21.9)
300 (148) 1140 (78.5) 1117 (76.9) 912 (62.8) 654 (45.0) 517 (35.6) 490 (33.7) 395 (27.2) 289 (19.9)
400 (204) 1050 1029 840 602 476 451 364 266
MEDIUM- HIGH-
(72.3) (70.8) (57.9) (41.4) (32.7) (31.0) (25.0) (18.3)

PRESSURE
500 (260) 975 (67.2) 955 (65.7) 780 (53.7) 559 (38.5) 442 (30.4) 419 (28.8) 338 (23.2) 247 (17.0)
600 (315) 930 (64.1) 911 (62.7) 744 (51.2) 533 (36.7) 422 (29.0) 400 (27.5) 322 (22.1) 236 (16.2)
700 (371) 885 (61.0) 867 (59.7) 708 (48.8) 507 (34.9) 401 (27.6) 381 (26.2) 307 (21.1) 224 (15.4)
750 (398) 870 (59.9) 853 (58.7) 696 (47.9) 499 (34.3) 394 (27.1) 374 (25.7) 302 (20.8) 220 (15.1)
800 (426) 855 (58.9) 838 (57.7) 684 (47.1) 490 (33.7) 388 (26.7) 368 (25.3) 296 (20.3) 216 (14.8)
REFERENCES
850 (454) 840 (57.9) 823 (56.7) 672 (46.3) 482 (33.2) 381 (26.2) 361 (24.8) 291 (20.0) 213 (14.6)

FITTINGS
TUBE

Every Swagelok FL series hose assembly Swagelok FL series hose components hose to pressure surges, shock,
is inboard helium leak tested to a are cleaned in accordance with or pulsations, where the peak
pressure is greater than 50 % of
PIPE, WELD,
maximum leak rate of Swagelok Standard Cleaning and

VCR, VCO
FITTINGS
1 × 10 –5 std cm3/s. Packaging (SC‑10) catalog, MS‑06‑62. the working pressure rating.
bagged, and boxed.
STANDARD
TUBING

FLEXIBLE
TUBING
HOSE /
Standard Length Hose Assemblies

L
BALL & PLUG
VALVES
OAL
DIAPHRAGM
BELLOWS,
VALVES

CHECK & RELIEF
VALVES
Dimensions
Hose Adapter Length Ordering Length Inside Outside
Size Size OAL Number L Diameter Dimension
METERING
NEEDLE &
Dimensions, in. in. (cm) in. (cm) in. (mm)

VALVES
12.0 (30.5) SS-FL4TA4TA4-12 8.48 (21.5)

24.0 (61.0) SS-FL4TA4TA4-24 20.5 (52.1) 0.16 0.66
1/4 1/4
36.0 (91.4) SS-FL4TA4TA4-36 32.5 (82.6) (4.1) (16.8)
48.0 (122) SS-FL4TA4TA4-48 44.5 (113)
INSTRUMENT
MANIFOLD
SYSTEMS
12.0 (30.5) SS-FL8TA8TA8-12 7.50 (19.0)

0.37 1.01
1/2 1/2 24.0 (61.0) SS-FL8TA8TA8-24 19.5 (49.5)
(9.4) (25.7)
36.0 (91.4) SS-FL8TA8TA8-36 31.5 (80.0)
MODULAR
SYSTEMD
REGULATORS
& FILTERS
MEASUREMENT
DEVICES
MEDIUM- HIGH-
PRESSURE
REFERENCES
FITTINGS
TUBE
PIPE, WELD,
VCR, VCO
FITTINGS
1 2 3 4 4 5 6 5 6
SS - FL 4 TA4 PM4 - 28 - F 71CM-F
STANDARD
or
TUBING
in. cm

FLEXIBLE
TUBING
HOSE /
SS = 316 stainless steel column in tables below. with a dash between each designator.
F = Fire jacket
2 Hose 5 Overall Length F1 = Thermosleeve
FL = FL series metal hose C = ASTM G93 Level C cleaning on
Inches or centimeters, in whole
BALL & PLUG

hose wetted surfaces
numbers. Include CM as shown for
VALVES
3 Nominal Hose Size, in. G = CGA 4.1 cleaning on hose
centimeter lengths.
wetted surfaces (available for
4 = 1/4 16 = 1
all hose sizes except 1/4 and
6 = 3/8 20 = 1 1/4
1/2 in.)
8 = 1/2 24 = 1 1/2
DIAPHRAGM
BELLOWS,
VALVES
12 = 3/4 32 = 2 cm3/s)
Mat Tags
CHECK & RELIEF

VALVES
MC = Brown MR = Red
METERING
NEEDLE &
MN = Pink
VALVES
Example: MA2
INSTRUMENT
Other Tags
MANIFOLD
SYSTEMS
T = Lanyard tag
MODULAR
SYSTEMD
of options.
REGULATORS
& FILTERS
MEASUREMENT
DEVICES
MEDIUM- HIGH-
PRESSURE
REFERENCES

FITTINGS
TUBE
End Connections
PIPE, WELD,

VCR, VCO
FITTINGS

1/4 4 TA4 1.76 (44.7) 0.16 (4.1) 0.66 (16.8)
A 4 TA6 1.79 (45.5) 0.66 (16.8)
Cap Weld Style— 3/8 6 TA6 1.81 (46.0) 0.27 (6.9) 0.83 (21.1)
STANDARD
TUBING
1/4 and 1/2 in.

8 TA6 2.03 (51.6) 1.01 (25.7)
1/2 8 TA8 2.25 (57.2) 0.37 (9.4) 1.01 (25.7)
3/4 12 TA12 2.50 (63.5) 0.58 (14.7) 1.39 (35.3)
1 16 TA16 2.87 (72.9) 0.80 (20.3) 1.66 (42.2)
FLEXIBLE
TUBING
HOSE /
A 1 1/4➀ 20 TA20 3.91 (99.3) 1.02 (25.9) 2.16 (54.9)

Manual Weld Style— 1 1/2➀ 24 TA24 4.47 (113) 1.25 (31.8) 2.59 (65.8)
3/8, 3/4, and 1 in. 2➀ 32 TA32 5.45 (138) 1.72 (43.7) 3.45 (87.6)
BALL & PLUG
6 4 TM6 44.4 (1.75) 4.1 (0.16) 16.8 (0.66)

VALVES
8 4 TM8 45.2 (1.78) 5.6 (0.22) 16.8 (0.66)

4 TM10 45.2 (1.78) 16.8 (0.66)
A 10 6 TM10 53.3 (2.10) 7.1 (0.28) 25.7 (1.01)
8 TM10 51.3 25.7 (1.01)
DIAPHRAGM
Manual Weld Style— (2.02)

BELLOWS,
VALVES
Preswaged 12 8 TM12 57.4 (2.26) 8.9 (0.35) 25.7 (1.01)

Nuts and Ferrules— 18 12 TM18 61.0 (2.40) 14.0 (0.55) 35.3 (1.39)
Over 1 in. / 25 mm
25 16 TM25 72.9 (2.87) 19.8 (0.78) 42.2 (1.66)
32➀ 20 TM32 87.4 (3.44) 26.4 (1.04) 57.4 (2.26)
CHECK & RELIEF
VALVES
38➀ 24 TM38 97.3 (3.83) 31.8 (1.25) 69.1 (2.72)


METERING
NEEDLE &
VALVES

1/4 4 SL4 1.94 (49.3) 0.19 (4.8) 0.80 (20.3)
INSTRUMENT
MANIFOLD
SYSTEMS
A 6 SL6 2.07 (52.6) 0.28 (7.1) 0.83 (21.1)

3/8
Cap Weld Style— 8 SL6 2.22 (56.4) 0.28 (7.1) 1.23 (31.2)
1/4 and 1/2 in. 1/2 8 SL8 2.33 (59.2) 0.41 (10.4) 1.23 (31.2)
3/4 12 SL12 2.62 (66.5) 0.63 (16.0) 1.39 (35.3)
1 16 SL16 3.08 (78.2) 0.88 (22.4) 1.66 (42.2)
MODULAR
SYSTEMD
1 1/4➀ 20 SL20 3.79 (96.3) 1.09 (27.7) 2.02 (51.3)

1 1/2➀ 24 SL24 4.25 (108) 1.35 (34.3) 2.45 (62.2)
A 2➀ 32 SL32 5.22 (133) 1.82 (46.2) 3.17 (80.5)
Manual Weld Style— Dimensions, mm (in.)
REGULATORS
& FILTERS
All other sizes 6 4 SM6 49.3 (1.94) 4.8 (0.19) 20.3 (0.80)
6 SM10 53.6 (2.11) 7.9 (0.31) 21.1 (0.83)
10
8 SM10 56.4 (2.22) 7.9 (0.31) 31.3 (1.23)
12 8 SM12 59.2 (2.33) 9.7 (0.38) 31.3 (1.23)
MEASUREMENT
18 12 SM18 66.5 (2.62) 15.0 (0.59) 35.3 (1.39)

DEVICES
25 16 SM25 78.2 (3.08) 21.8 (0.86) 42.2 (1.66)

32➀ 20 SM32 98.8 (3.89) 28.7 (1.13) 52.8 (2.08)
38➀ 24 SM38 111 (4.36) 33.8 (1.33) 63.2 (2.49)
MEDIUM- HIGH-
PRESSURE

REFERENCES
See next page for more end connections.

FITTINGS
TUBE
PIPE, WELD,
VCR, VCO
FITTINGS
1/4 4 RM4 2.60 (66.0) 0.18 (4.6) 0.73 (18.4)
A
Cap Weld Style— 1/2 8 RM8 2.88 (73.2) 0.40 (10.2) 1.09 (27.7)
1/4 and 1/2 in. 3/4 12 RM12 2.63 (66.8) 0.63 (16.0) 1.51 (38.4)
1 16 RM16 2.85 (72.4) 0.88 (22.4) 1.88 (47.8)
STANDARD
TUBING
A
All other sizes
FLEXIBLE
TUBING
HOSE /
Rotatable Female VCR Metal
BALL & PLUG

VALVES
1/4 4 RF4 2.00 (50.8) 0.18 (4.6) 0.87 (22.1)
A
Cap Weld Style— 1/2 8 RF8 2.21 (56.1) 0.40 (10.2) 1.23 (31.2)
1/4 and 1/2 in. 3/4 12 RF12 2.63 (66.8) 0.63 (16.0) 1.73 (43.9)
1 16 RF16 2.85 (72.4) 0.88 (22.4) 2.02 (51.3)
DIAPHRAGM
SWAGELOK
BELLOWS,
VALVES
A
All other sizes
CHECK & RELIEF

VALVES
Seal Fittings
METERING
NEEDLE &
VALVES
1/4 4 VF4 2.48 (63.0) 0.18 (4.6) 0.80 (20.3)
A 1/2 8 VF8 2.69 (68.3) 0.40 (10.2) 1.16 (29.5)
Cap Weld Style— 3/4 12 VF12 1.57 (39.9) 0.63 (16.0) 1.73 (43.9)
1/4 and 1/2 in.
1 16 VF16 1.61 (40.9) 0.88 (22.4) 2.02 (51.3)
INSTRUMENT
MANIFOLD
SYSTEMS
A
All other sizes
MODULAR
SYSTEMD
SAE 37° (JIC) Female Swivel
REGULATORS
& FILTERS
A
1/4 4 AS4 1.87 (47.5) 0.17 (4.3) 0.79 (20.1)
Cap Weld Style—
1/4 and 1/2 in. 3/8 6 AS6 1.78 (45.2) 0.28 (7.1) 0.87 (22.1)
1/2 8 AS8 2.21 (56.1) 0.42 (10.7) 1.23 (31.2)
3/4 12 AS12 2.26 (57.4) 0.61 (15.5) 1.44 (36.6)
MEASUREMENT
1 16 AS16 2.52 (64.0) 0.84 (21.3) 1.73 (43.9)

DEVICES
A
All other sizes
MEDIUM- HIGH-
PRESSURE
REFERENCES

FITTINGS
TUBE

NPT
PIPE, WELD,
VCR, VCO
FITTINGS
1/4 4 PF4 1.81 (46.0) 0.28 (7.1) 0.87 (22.1)

A
A
3/8 6 PF6 1.84 (46.7) 0.42 (10.7) 1.01 (25.7)
Cap Weld Style—
1/4 and 1/2 in. 1/2 8 PF8 2.22 (56.4) 0.47 (11.9) 1.23 (31.2)
3/4 12 PF12 2.41 (61.2) 0.73 (18.5) 1.51 (38.4)
STANDARD
TUBING
1 16 PF16 2.80 (71.1) 0.95 (24.1) 1.88 (47.8)

1 1/2 24 PF24 3.28 (83.3) 1.50 (38.1) 2.74 (69.6)
A
All other sizes
FLEXIBLE
TUBING
HOSE /

BALL & PLUG
VALVES

NPT
1/4 4 PM4 1.80 (45.7) 0.28 (7.1) 0.80 (20.3)
A 6 PM6 1.91 (48.5) 0.83 (21.1)
3/8 0.38 (9.7)
DIAPHRAGM
Cap Weld Style— 8 PM6 2.02 1.23

BELLOWS,
(51.3) (31.2)
VALVES
1/4 and 1/2 in. 1/2 8 PM8 2.21 (56.1) 0.47 (11.9) 1.23 (31.2)
3/4 12 PM12 2.45 (62.2) 0.63 (16.0) 1.39 (35.3)
1 16 PM16 2.93 (74.4) 0.88 (22.4) 1.66 (42.2)
CHECK & RELIEF
1 1/4 20 PM20 3.14 (79.8) 1.09 (27.7) 2.02 (51.3)

VALVES
A 1 1/2 24 PM24 3.38 (85.9) 1.34 (34.0) 2.45 (62.2)

Manual Weld Style— 2 32 PM32 3.63 (92.2) 1.81 (46.0) 2.81 (71.4)
All other sizes ISO/BSP Tapered
1/4 4 MT4 1.80 (45.7) 0.28 (7.1) 0.80 (20.3)
METERING
NEEDLE &
3/8 6 MT6 1.91 (48.5) 0.38 0.83

VALVES
(9.7) (21.1)
1/2 8 MT8 2.21 (56.1) 0.47 (11.9) 1.23 (31.2)
3/4 12 MT12 2.45 (62.2) 0.63 (16.0) 1.39 (35.3)
1 16 MT16 2.93 (74.4) 0.88 (22.4) 1.66 (42.2)
INSTRUMENT
1 1/4 20 MT20 3.14 (79.8) 1.09 (27.7) 2.02 (51.3)

MANIFOLD
SYSTEMS
1 1/2 24 MT24 3.38 (85.8) 1.34 (34.0) 2.45 (62.2)
Tube Butt Welds

MODULAR
SYSTEMD

A
1/4 0.035 4 TB4 1.90 (48.3) 0.18 (4.6) 0.66 (16.8)
REGULATORS
3/8 0.035 6 TB6 1.82 (46.2) 0.31 (7.9) 0.83 (21.1)

& FILTERS
0.75 in.
(19.0 mm) 1/2 0.049 8 TB8 2.09 (53.1) 0.40 (10.2) 1.01 (25.7)
Cap Weld Style— 3/4 0.049 12 TB12 2.14 (54.4) 0.65 (16.5) 1.39 (35.3)
1/4 and 1/2 in.
MEASUREMENT
DEVICES
A
0.75 in.
(19.0 mm)
MEDIUM- HIGH-
PRESSURE

All other sizes
REFERENCES
AH Series Metal Hose
FITTINGS
TUBE
Features
■ Corrosion resistant all-metal hose. ■ Commonly used in high-temperature vacuum or corrosion
■ Alloy C-276 annular convoluted core. resistant applications where permeation is undesirable.
PIPE, WELD,
■ Custom assemblies available.
VCR, VCO
FITTINGS
vacuum to 1110 psig (76.4 bar). ■ Options include hose covers, hose tags, additional
■ Single braid layer of 316L stainless steel promotes hose cleaning, and additional helium leak testing. See page 108
pressure containment. for details.
■ C-276 braid and end connections available upon request.
STANDARD
TUBING
316 SS
FLEXIBLE
TUBING
end connections
HOSE /
316L SS braid C-276 core Weld
BALL & PLUG

VALVES
DIAPHRAGM
BELLOWS,
VALVES
316 SS weld collar
Technical Data
CHECK & RELIEF

VALVES
Working
Pressure at Minimum
Bend Radius
in. (cm)
METERING
NEEDLE &
VALVES
1/2 (12.7) 0.50 (12.7) 0.74 (18.8) 1.50 (3.81) 6.50 (16.5) 1110 (76.4) 4440 (306) 0.22 (0.33)
3/4 (19.0) 0.75 (19.0) 1.09 (27.7) 2.10 (5.33) 8.86 (22.5) 860 (59.2) 3440 (237) 0.37 (0.55)
–325 to 800
1 (25.4) 1.00 (25.4) 1.38 (35.1) 2.70 (6.86) 10.2 (25.9) 680 (46.8) 2720 (187) 0.50 (0.74)
(–200 to 426)
INSTRUMENT
1 1/2 (38.1) 1.50 (38.1) 1.99 (50.5) 3.90 (9.91) 13.4 (34.0) 520 (35.8) 2080 (143) 0.85 (1.26)
MANIFOLD
SYSTEMS
2 (50.8) 2.00 (50.8) 2.51 (63.8) 5.10 (13.0) 15.4 (39.1) 450 (31.0) 1800 (124) 1.10 (1.65)
MODULAR
SYSTEMD
Piping, B31.1 Power Piping.
Nominal Hose Size, in. 1/2 3/4 1 1 1/2 2
REGULATORS
°F (°C) Vacuum to ... psig (bar) & FILTERS
–325 (–200) to 300 (148) 1110 (76.4) 860 (59.2) 680 (46.8) 520 (35.8) 450 (31.0)
400 (204) 1032 (71.1) 800 (55.1) 632 (43.5) 484 (33.3) 419 (28.8)
500 (260) 955 (65.7) 740 (50.9) 585 (40.2) 447 (30.8) 387 (26.6)
MEASUREMENT
600 (315) 899 (61.9) 697 (47.9) 551 (37.9) 421 (29.0) 365 (25.1)
DEVICES
700 (371) 855 (58.8) 662 (45.6) 524 (36.0) 400 (27.5) 347 (23.8)
750 (398) 833 (57.3) 645 (44.4) 510 (35.1) 390 (26.8) 338 (23.2)
800 (426) 821 (56.5) 636 (43.8) 503 (34.6) 385 (26.5) 333 (22.9)
MEDIUM- HIGH-
PRESSURE
REFERENCES

FITTINGS
TUBE

Every Swagelok AH series hose Swagelok AH series hose components hose to pressure surges, shock,
to a maximum leak rate of 1 × 10 –5 Swagelok Standard Cleaning and pressure is greater than 50 % of
PIPE, WELD,
VCR, VCO
FITTINGS

bagged, and boxed.
STANDARD
TUBING
FLEXIBLE
TUBING
HOSE /
1 2 3 4 4 5 6 5 6
BALL & PLUG
VALVES
SS - AH 8 TA8 PM8 - 28 - F or 71CM-F

in. cm

DIAPHRAGM
BELLOWS,
VALVES
A= Armor guard
2 Hose 5 Overall Length F= Fire jacket
CHECK & RELIEF
AH = AH series metal hose F1 = Thermosleeve

VALVES

numbers. Include CM as shown for C= ASTM G93 Level C cleaning on
3 Nominal Hose Size, in. centimeter lengths. hose wetted surfaces
8 = 1/2 16 = 1 G = CGA 4.1 cleaning on hose
12 = 3/4 24 = 1 1/2 wetted surfaces
METERING
NEEDLE &
H =Helium leak test (1 × 10−9 std

VALVES
32 = 2
cm3/s)
cm3/s)
INSTRUMENT
MANIFOLD
SYSTEMS
Mat Tags
MC = Brown MR = Red
MODULAR
SYSTEMD
MN = Pink
REGULATORS

& FILTERS
Example: MA2
Other Tags
T = Lanyard tag
MEASUREMENT

DEVICES
T5 = Clamp tag
MEDIUM- HIGH-

PRESSURE
of options.
REFERENCES
FITTINGS
TUBE
End Connections
PIPE, WELD,
VCR, VCO
FITTINGS
A 1/2 8 TA8 2.28 (57.9) 0.37 (9.4) 1.08 (27.4)
3/4 12 TA12 2.62 (66.5) 0.58 (14.7) 1.50 (38.1)
1 in. and Under
1 16 TA16 2.99 (75.9) 0.80 (20.3) 1.79 (45.5)
STANDARD
TUBING
1 1/2 ➀ 24 TA24 4.47 (114) 1.25 (31.8) 2.59 (65.8)
2➀ 32 TA32 5.70 (145) 1.72 (43.7) 3.45 (87.6)
12 8 TM12 67.9 (2.67) 8.9 (0.35) 27.4 (1.08)
FLEXIBLE
TUBING
HOSE /
18 12 TM18 64.0 (2.52) 14.0 (0.55) 38.1 (1.50)
A
25 16 TM25 75.9 (2.99) 19.8 (0.78) 45.5 (1.79)
Preswaged Nuts
and Ferrules— 38 ➀ 24 TM38 97.3 (3.83) 31.8 (1.25) 69.1 (2.72)
Over 1 in. / 25 mm ➀ Furnished with silver-plated front ferrule and uncoated back ferrule which are required for performance
BALL & PLUG

above 450˚F (232˚C).
VALVES
DIAPHRAGM
BELLOWS,
VALVES
A 1/2 8 SL8 2.56 (65.0) 0.41 (10.4) 1.08 (27.4)
CHECK & RELIEF

3/4 12 SL12 2.74 (69.6) 0.63 (16.0) 1.50 (38.1)
VALVES
1 16 SL16 3.20 (81.3) 0.88 (22.4) 1.79 (45.5)
1 1/2➀ 24 SL24 4.25 (108) 1.35 (34.3) 2.45 (62.2)
2➀ 32 SL32 5.47 (139) 1.82 (46.2) 3.17 (80.5)
METERING
NEEDLE &
VALVES
12 8 SM12 65.0 (2.56) 9.7 (0.38) 27.4 (1.08)
18 12 SM18 69.6 (2.74) 15.0 (0.59) 38.1 (1.50)
25 16 SM25 81.3 (3.20) 21.8 (0.86) 45.5 (1.79)
38➀ 24 SM38 111 (4.36) 33.8 (1.33) 63.2 (2.49)
INSTRUMENT
MANIFOLD
SYSTEMS
➀ Furnished with silver-plated front ferrule and uncoated back ferrule which are required for performance
above 450˚F (232˚C).
Rotatable Male
VCR Metal Gasket
MODULAR
SYSTEMD
Face Seal Fittings
1/2 8 RM8 2.13 (54.1) 0.40 (10.2) 1.08 (27.4)
3/4 12 RM12 2.75 (69.9) 0.63 (16.0) 1.51 (38.4)
REGULATORS
& FILTERS
A 1 16 RM16 2.97 (75.4) 0.88 (22.4) 1.88 (47.8)
Rotatable Female
MEASUREMENT
VCR Metal Gasket

DEVICES

1/2 8 RF8 2.13 (54.1) 0.40 (10.2) 1.23 (31.2)
SWAGELOK
3/4 12 RF12 2.75 (69.9) 0.63 (16.0) 1.73 (43.9)

MEDIUM- HIGH-
PRESSURE
1 16 RF16 2.97 (75.4) 0.88 (22.4) 2.02 (51.3)

A
REFERENCES

FITTINGS
TUBE
Female VCO O-Ring

Face Seal Fittings
PIPE, WELD,
VCR, VCO
FITTINGS

1/2 8 VF8 1.44 (36.6) 0.41 (10.4) 1.08 (27.4)
A 3/4 12 VF12 1.69 (42.9) 0.63 (16.0) 1.73 (43.9)
1 16 VF16 1.73 (43.9) 0.88 (22.4) 2.02 (51.3)
STANDARD
TUBING
SAE 37º (JIC) Female

Swivel Dimensions, in. (mm)
FLEXIBLE
TUBING
HOSE /

1/2 8 AS8 2.08 (52.8) 0.39 (9.9) 1.08 (27.4)
3/4 12 AS12 2.39 (60.7) 0.61 (15.5) 1.50 (38.1)
A
BALL & PLUG
1 16 AS16 2.64 (67.1) 0.84 (21.3) 1.79 (45.5)

VALVES

DIAPHRAGM
BELLOWS,
NPT Dimensions, in. (mm)

VALVES

1/2 8 PF8 2.58 (65.5) 0.58 (14.7) 1.23 (31.2)
CHECK & RELIEF
VALVES
3/4 12 PF12 2.53 (64.3) 0.73 (18.5) 1.51 (38.4)

A
1 16 PF16 2.92 (74.2) 0.95 (24.1) 1.88 (47.8)
1 1/2 24 PF24 3.28 (83.3) 1.50 (38.1) 2.74 (69.6)
METERING
NEEDLE &
VALVES
Male Pipe Threads, NPT NPT and

and ISO/BSP Tapered ISO/BSP Dimensions, in. (mm)
INSTRUMENT
MANIFOLD
SYSTEMS

NPT
1/2 8 PM8 2.45 (62.2) 0.47 (11.9) 1.08 (27.4)
3/4 12 PM12 2.57 (65.3) 0.63 (16.0) 1.50 (38.1)
A
MODULAR
1 16 PM16 3.05 0.88 1.79

SYSTEMD
(77.5) (22.4) (45.5)

1 1/2 24 PM24 3.38 (85.9) 1.34 (34.0) 2.45 (62.2)
2 32 PM32 3.88 (98.6) 1.81 (46.0) 2.92 (74.2)
ISO/BSP Tapered
1/2 8 MT8 2.45 (62.2) 0.47 1.08
REGULATORS
(11.9) (27.4)
& FILTERS
3/4 12 MT12 2.57 (65.3) 0.63 (16.0) 1.50 (33.5)

1 16 MT16 3.05 (77.5) 0.88 (22.4) 1.79 (41.4)
1 1/2 24 MT24 3.38 (85.9) 1.34 (34.0) 2.45 (62.6)
MEASUREMENT
DEVICES
Tub Butt Welds

Tube Butt Dimensions, in. (mm)
Weld Nominal End Minimum Maximum
MEDIUM- HIGH-
PRESSURE
A 1/2 8 TB8 2.17 (55.1) 0.40 (10.2) 0.93 (23.6)

3/4 12 TB12 2.27 (57.7) 0.65 (16.5) 1.32 (33.5)
0.75 in.
(19.0 mm) 1 16 TB16 2.46 (62.5) 0.87 (22.1) 1.63 (41.4)
REFERENCES
FN Series Metal Tubing
FITTINGS
TUBE
Features
■ 316L stainless steel annular convoluted core. ■ Commonly used in high-temperature vacuum or low-
■ Size range of 1/4 through 1/2 in. and working pressures up pressure applications where permeation is undesirable.
PIPE, WELD,
VCR, VCO
FITTINGS
to 135 psig (9.3 bar). ■ Custom assemblies available.
■ Form-fit-and-stay capability of tubing assemblies can ■ Options include tubing tags, additional cleaning, and
compensate for misalignment and system reroutes additional helium leak testing. See pages 108 and 109
between static connections in vacuum or low-pressure for details.
static applications.
STANDARD
TUBING
Weld
FLEXIBLE
316L SS core
TUBING
HOSE /
316 SS end
connections
BALL & PLUG

VALVES
DIAPHRAGM
BELLOWS,
VALVES
Technical Data
CHECK & RELIEF

VALVES
Working
Pressure at
-325 to 300°F Nominal
Nominal Inside Outside Temperature (-200 to 148°C) Tubing Wall Tubing
Tubing Size Diameter Diameter Range 10-9 torr to ... Thickness Weight
METERING
NEEDLE &
VALVES
in. (mm) in. (mm) in. (mm) °F (°C) psig (bar) in. (mm) lb/ft (kg/m)
1/4 (6.4) 0.27 (6.9) 0.41 (10.4) 135 (9.3) 0.006 (0.15) 0.04 (0.06)
–325 to 1000
3/8 (9.7) 0.38 (9.7) 0.54 (13.7) 65 (4.4) 0.006 (0.15) 0.06 (0.09)
(–200 to 537)
1/2 (12.7) 0.53 (13.5) 0.75 (19.1) 60 (4.1) 0.008 (0.20) 0.11 (0.16)
INSTRUMENT
MANIFOLD
SYSTEMS
MODULAR
SYSTEMD
Nominal Tube Size, in. 1/4 3/8 1/2
–325 (–200) to 300 (148) 135 (9.3) 65 (4.4) 60 (4.1)
400 (204) 127 61 56
REGULATORS
(8.7) (4.2) (3.8)
& FILTERS
500 (260) 120 (8.2) 58 (3.9) 53 (3.6)
600 (315) 113 (7.8) 55 (3.7) 50 (3.4)
700 (371) 109 (7.5) 53 (3.6) 49 (3.3)

800 (426) 104 (7.1) 50 (3.4) 46 (3.1)
MEASUREMENT
900 (482) 100 (6.8) 48 (3.3) 44 (3.0)

DEVICES
1000 (537) 96 (6.6) 46 (3.1) 43 (2.9)

Every Swagelok FN series tube Swagelok FN series tube components tube to pressure surges, shock,
MEDIUM- HIGH-
or pulsations, where the peak

PRESSURE
assembly is inboard helium leak tested are cleaned in accordance with

For additional testing, see Testing, Each tube is bagged or sleeved
page 108. individually and boxed; longer tubes are
REFERENCES
coiled, bagged, and boxed.

FN Series Metal Tubing

FITTINGS
TUBE
Custom Tube Assemblies
Build a tube assembly ordering number by combining the designators in the sequence shown below.
PIPE, WELD,
VCR, VCO
FITTINGS
1 2 3 4 4 5 6 5 6
STANDARD
TUBING
S S - F N 4 T A 4 R F 4 - 36 - H or 90CM-H
in. cm

FLEXIBLE
TUBING
HOSE /
SS = 316 stainless steel column in tables on page 41. with a dash between each designator.
C=A STM G93 Level C cleaning on
2 Tube 5 Overall Length tube wetted surfaces
BALL & PLUG
FN = FN series annealed metal tube Inches to one decimal, or centimeters G = CGA 4.1 cleaning on tube
VALVES
in whole numbers. Include CM as wetted surfaces

3 Nominal Tube Size, in. shown for centimeter lengths. H = Helium leak test
4 = 1/4 (1 × 10−9 std cm3/s)
Maximum length is 96 in (244 cm).
T =Lanyard tag
6 = 3/8 For longer lengths, please contact
DIAPHRAGM
BELLOWS,
8 = 1/2 T2 = Two layered tags

VALVES
your authorized Swagelok sales and

service center.
CHECK & RELIEF
VALVES
METERING
NEEDLE &
VALVES
INSTRUMENT
MANIFOLD
SYSTEMS
MODULAR
SYSTEMD
REGULATORS
& FILTERS
MEASUREMENT
DEVICES
MEDIUM- HIGH-
PRESSURE
REFERENCES
FZ Series Metal Tubing
FITTINGS
TUBE
Features
■ 316L stainless steel annular convoluted core. ■ Custom assemblies available.
■ Size range of 1/4 through 1/2 in. and working pressures up ■ Options include tubing tags, additional cleaning, and
PIPE, WELD,
to 250 psig (17.2 bar). additional helium leak testing. See pages 108 and 109
VCR, VCO
FITTINGS
■ Non-annealed all-metal tubing can be used in dynamic for details.
applications. ■ For electrical properties, see page 5 for details.
■ Commonly used in high-temperature vacuum or low-
pressure applications where permeation is undesirable.
STANDARD
TUBING
316L SS core 316 SS end
Weld TA to match the Microsoft Teams image png
FLEXIBLE
TUBING
connections
HOSE /
BALL & PLUG
VALVES
DIAPHRAGM
BELLOWS,
VALVES
Technical Data
CHECK & RELIEF

VALVES
Working
Pressure at
-325 to 300°F Nominal
Nominal Inside Outside Temperature (-200 to 148°C) Tubing Wall Tubing
Tubing Size Diameter Diameter Range 10-9 torr to ... Thickness Weight
METERING
NEEDLE &
VALVES
in. (mm) in. (mm) in. (mm) °F (°C) psig (bar) in. (mm) lb/ft (kg/m)
1/4 (6.4) 0.27 (6.9) 0.41 (10.4) 250 (17.2) 0.006 (0.15) 0.04 (0.06)
–325 to 1000
3/8 (9.7) 0.38 (9.7) 0.54 (13.7) 105 (7.2) 0.006 (0.15) 0.06 (0.09)
(–200 to 537)
1/2 (12.7) 0.53 (13.5) 0.75 (19.1) 95 (6.5) 0.008 (0.20) 0.11 (0.16)
INSTRUMENT
MANIFOLD
SYSTEMS
Nominal Tube Size, in. 1/4 3/8 1/2
MODULAR
SYSTEMD
–325 (–200) to 300 (148) 250 (17.2) 105 (7.2) 95 (6.5)
400 (204) 235 (16.1) 99 (6.8) 89 (6.1)
REGULATORS
500 (260) 223 93 85
& FILTERS
(15.3) (6.4) (5.8)
600 (315) 210 (14.4) 88 (6.0) 80 (5.4)
700 (371) 203 (13.9) 85 (5.8) 77 (5.3)

800 (426) 193 (13.2) 81 (5.5) 73 (5.0)
900 (482) 185 (12.7) 78 (5.3) 70 (4.8)
MEASUREMENT
1000 (537) 178 (12.2) 75 (5.1) 67 (4.6)

DEVICES

Every Swagelok FZ series tube Swagelok FZ series tube components tube to pressure surges, shock,
MEDIUM- HIGH-
PRESSURE
For additional testing, see Testing, Each tube is bagged or sleeved
page 108. individually and boxed; longer tubes are
REFERENCES
coiled, bagged, and boxed.

FZ Series Metal Tubing

FITTINGS
TUBE
Custom Tube Assemblies
Build a tube assembly ordering number by combining the designators in the sequence shown below.
PIPE, WELD,
VCR, VCO
FITTINGS
1 2 3 4 4 5 6 5 6
STANDARD
TUBING
S S - F Z 4 T A 4 R F 4 - 36 - H or 90CM-H
in. cm

FLEXIBLE
TUBING
HOSE /
SS = 316 stainless steel column in tables on page 41. with a dash between each designator.
2 Tube 5 Overall Length tube wetted surfaces
BALL & PLUG
FZ = FZ series metal tube Inches to one decimal, or centimeters G = CGA 4.1 cleaning on tube
VALVES
in whole numbers. Include CM as wetted surfaces

3 Nominal Tube Size, in. shown for centimeter lengths. H = Helium leak test
4 = 1/4 (1 × 10−9 std cm3/s)
Maximum length is 480 in. (1219 cm). T =Lanyard tag
6 = 3/8
DIAPHRAGM
BELLOWS,
8 = 1/2 T2 = Two layered tags

VALVES
CHECK & RELIEF
VALVES
METERING
NEEDLE &
VALVES
INSTRUMENT
MANIFOLD
SYSTEMS
MODULAR
SYSTEMD
REGULATORS
& FILTERS
MEASUREMENT
DEVICES
MEDIUM- HIGH-
PRESSURE
REFERENCES
FN and FZ Series Metal Tubing
FITTINGS
TUBE
End Connections
Dimensions
PIPE, WELD,
VCR, VCO
FITTINGS
Adapter Tube Connection Inside Outside
Size Size Designator A Diameter Dimension
A
1/4 4 TA4 1.58 (40.1) 0.17 (4.3) 0.36 (9.1)
STANDARD
3/8 6 TA6 1.65 (41.9) 0.28 (7.1) 0.50 (12.7)
TUBING
1/2 8 TA8 2.02 (51.3) 0.40 (10.2) 0.61 (15.5)
Tube Butt Welds

Tube Dimensions
FLEXIBLE
TUBING
HOSE /
Butt Nominal End Minimum Maximum
Weld Tube Connection Inside Outside
A
1/4 4 TB4 1.70 (43.2) 0.17 (4.3) 0.36 (9.1)
BALL & PLUG

VALVES
3/8 6 TB6 1.71 (43.4) 0.28 (7.1) 0.50 (12.7)
1/2 8 TB8 1.82 (46.2) 0.40 (10.2) 0.61 (15.5)
DIAPHRAGM
Dimensions
BELLOWS,
VALVES
Nominal End Minimum Maximum
VCR Tube Connection Inside Outside
CHECK & RELIEF

A
1/4 4 RM4 1.69 (42.9) 0.17 (4.3) 0.87 (22.1)
VALVES
1/2 6 RM8 1.89 (48.0) 0.28 (7.1) 1.22 (31.0)
1/2 8 RM8 2.00 (50.8) 0.40 (10.2) 1.22 (31.0)
Rotatable Female VCR
METERING
NEEDLE &
VALVES
Dimensions
Metal Gasket Face Seal
Fittings Nominal End Minimum Maximum
VCR Tube Connection Inside Outside
INSTRUMENT
MANIFOLD
SYSTEMS
1/4 4 RF4 1.69 (42.9) 0.17 (4.3) 0.87 (22.1)
A 1/2 6 RF8 1.89 (48.0) 0.28 (7.1) 1.22 (31.0)
1/2 8 RF8 2.00 (50.8) 0.40 (10.2) 1.22 (31.0)
MODULAR
SYSTEMD
Dimensions
Seal Fittings
VCO Tube Connection Inside Outside
REGULATORS
& FILTERS
1/4 4 VF4 1.30 (33.0) 0.17 (4.3) 0.79 (20.1)
A 1/2 6 VF8 1.32 (33.5) 0.28 (7.1) 1.15 (29.2)
1/2 8 VF8 1.43 (36.3) 0.40 (10.2) 1.15 (29.2)
MEASUREMENT
DEVICES
MEDIUM- HIGH-
PRESSURE
REFERENCES
Convoluted Metal Tubing

FITTINGS
TUBE
Features
■ Form-fit-and-stay, flexible, all-metal tubing. ■ Commonly used in high-temperature vacuum or low-
■ 321 stainless steel annular convoluted core. pressure static applications.
PIPE, WELD,
■ Standard and custom tubing lengths, custom tubing

VCR, VCO
FITTINGS
■ Size range of 1/4 through 1 1/2 in. and working pressures

up to 100 psig (6.8 bar). assemblies, and adapters for field assembly are available.
■ Annealed material enables tubing to be compressed by at ■ Options include tubing tags, additional cleaning, and
least 15 % and extended up to 50 % of manufactured length. additional helium leak testing. See pages 108 and 109
for details.
STANDARD
■ Form-fit-and-stay capability of convoluted tubing can

TUBING
compensate for misalignment and system reroutes ■ For electrical properties, see page 5 for details.
between static connections in vacuum or low-pressure
static applications.
FLEXIBLE
TUBING
HOSE /
321 SS core 321 SS cuff Weld 316 SS end connections

and 316 SS or 304 SS
adapters
BALL & PLUG
VALVES
DIAPHRAGM
BELLOWS,
VALVES
Technical Data—Convoluted Metal Tubing

Form-fit-and-stay
Nominal Working Nominal
CHECK & RELIEF
Tubing Inside Outside Temperature Pressure Tubing Wall Tubing

VALVES
Size Diameter Diameter Range 10–9 torr to ... Thickness Weight

in. in. (mm) in. (mm) °F (°C) psig (bar) in. (mm) lb/ft (kg/m)
1/4 0.25 (6.4) 0.38 (9.5) 100 (6.8) 0.04 (0.06)
3/8 0.38 (9.5) 0.58 (14.7) 0.07 (0.10)
METERING
NEEDLE &
1/2 0.50 (12.7) 0.71 (17.9) 0.09 (0.13)

VALVES
70 to 1000
0.006 (0.15)
3/4 0.75 (19.0) 1.08 (27.4) (20 to 537) 25 (1.7) 0.19 (0.28)
1 1.00 (25.4) 1.36 (34.5) 0.23 (0.34)
1 1/2 1.50 (38.1) 1.92 (48.7) 0.34 (0.51)
INSTRUMENT
MANIFOLD
SYSTEMS
Technical Data—End Connections and Adapters Testing

Every Swagelok convoluted tubing
Temperature
End Connection Range assembly with factory-welded end
MODULAR
SYSTEMD
Type Material °F (°C) Availability connections is inboard helium leak

VCR 70 to 1000 tested to a maximum leak rate of
316 SS 1.8 × 10 –7 std cm3/s.
Male and female (20 to 537)
Factory welded
VCO 70 to 400 For additional testing, see Ordering
316 SS
REGULATORS
Male and female (20 to 204)

& FILTERS
Information, page 44.

304 SS (factory welded 1/2 in.
and larger sizes; Cleaning and Packaging
all sizes for field 70 to 1000 Factory welded or
XBA adapter Swagelok convoluted tubing assemblies
assembly) (20 to 537) field assembly
MEASUREMENT
316L SS (factory welded 1/4 and adapters are cleaned in accordance

DEVICES
and 3/8 in. sizes) with Swagelok Standard Cleaning and

70 to 400 Packaging (SC‑10) catalog, MS‑06‑62.
XOA adapter 304 SS Field assembly
(20 to 204) Each item is individually packaged for
cleanliness and protection.
MEDIUM- HIGH-
PRESSURE
• Not suitable for dynamic flexing

applications.
REFERENCES
FITTINGS
TUBE
Standard Tubing
PIPE, WELD,
VCR, VCO
FITTINGS
B T
STANDARD
A L
TUBING
Nominal
Tube Maximum
FLEXIBLE
TUBING
HOSE /
Size Cuff Outside Live Length, L Maximum
T Ordering Length Diameter Angular
in. Number A B Compressed Manufactured Extended Displacement➀
321-4-X-2 1.50 (38.1) 2.00 (50.8) 3.00 (76.2) 180°
321-4-X-4 3.25 (82.6) 4.00 (102) 6.00 (152)
BALL & PLUG

VALVES
0.75 0.38
1/4 321-4-X-6 4.75 (121) 6.00 (152) 9.00 (229)
(19.0) (9.7) 360°
321-4-X-12 9.00 (229) 12.0 (305) 18.0 (457)
321-4-X-24 18.0 (457) 24.0 (610) 36.0 (914)
321-6-X-1 0.75 (19.0) 1.00 (25.4) 1.50 (38.1) 90°
DIAPHRAGM
BELLOWS,
VALVES
321-6-X-3 2.50 (63.5) 3.00 (76.2) 4.50 (114) 225°
0.75 0.58
3/8 321-6-X-6 4.75 (121) 6.00 (152) 9.00 (229)
(19.0) (14.7)
321-6-X-12 9.00 (229) 12.0 (305) 18.0 (457) 360°
321-6-X-24 18.0 (457) 24.0 (610) 36.0 (914)
CHECK & RELIEF

321-8-X-3 2.50 (63.5) 3.00 (76.2) 4.50 (114) 180°
VALVES
321-8-X-6 1.00 0.71 4.75 (121) 6.00 (152) 9.00 (229)
1/2
321-8-X-12 (25.4) (18.0) 9.00 (229) 12.0 (305) 18.0 (457) 360°
321-8-X-24 18.0 (457) 24.0 (610) 36.0 (914)
➀ Angular displacement based on nominal live length, as manufactured. Angular displacement is not recommended for
METERING
NEEDLE &
VALVES
applications involving pressure surges.
INSTRUMENT
MANIFOLD
SYSTEMS
MODULAR
SYSTEMD
REGULATORS
& FILTERS
MEASUREMENT
DEVICES
MEDIUM- HIGH-
PRESSURE
REFERENCES

FITTINGS
TUBE
Custom Tubing and Tubing Assemblies
Build a custom tubing or tubing assembly ordering number by combining the designators in the sequence shown below.
PIPE, WELD,
VCR, VCO
FITTINGS
1 2 3 4 5 6
STANDARD
TUBING
3 2 1 - 4 - X - 36 F M R - H L T
1 Material 4 Manufactured Live Length 6 Options

FLEXIBLE
Tubing Insert length in inches, in whole For tubing assemblies.

TUBING
HOSE /
321 = 321 stainless steel numbers. HLT =Inboard helium leak test with
1/4 in. tubing size: available in select certification (1 × 10–9 std
2 Tube OD, in. lengths up to 120 in. cm3/s maximum leak rate)
4 = 1/4 All other tubing sizes: available in
BALL & PLUG
VALVES
6 = 3/8 select lengths up to 96 in.

8 = 1/2 Manufactured lengths over 48 in. but
12 = 3/4 less than 96 in. are spliced from two
16 = 1 pieces; manufactured lengths over
DIAPHRAGM
24 = 1 1/2 96 in. but less than 120 in. are spliced

BELLOWS,
VALVES
from three pieces.

3 Tubing To calculate the overall length of
X = Convoluted metal tubing the custom tubing assembly, add
CHECK & RELIEF
the manufactured live length (L) and

VALVES
two times the cuff length (A) for the

appropriate sized hose.
5 End Connections
METERING
NEEDLE &
For tubing assemblies.

VALVES
First End Second End

Connection Connection Designator
None -B1
INSTRUMENT
MANIFOLD
SYSTEMS
XBA adapter -B2

XBA adapter Female VCR FRB
Male VCR MRB
Female VCO FOB
None FR
MODULAR
SYSTEMD
Female VCR DFR

Female VCR
Male VCR FMR
Male VCO FRMO
None MR
REGULATORS
& FILTERS
Male VCR
Male VCR DMR
None FO
Female VCO DFO
Female VCO
Male VCR FOMR
MEASUREMENT
DEVICES
Male VCO FMO

None MO
Male VCO
Male VCO DMO
MEDIUM- HIGH-
PRESSURE
REFERENCES
FITTINGS
TUBE
Factory-Welded End Connections
Rotatable Female
VCR Metal Gasket
VCR Minimum Maximum
PIPE, WELD,
Face Seal Fittings
VCR, VCO
FITTINGS
Size Inside Outside
in. A Diameter Dimension
1/4 1.95 (49.5) 0.18 (4.6) 0.87 (22.1)
3/8 2.06 (52.3) 0.28 (7.1) 1.23 (31.2)
1/2 2.25 (57.2) 0.40 (10.2) 1.23 (31.2)
STANDARD
TUBING
A
Rotatable Male
FLEXIBLE
VCR Metal Gasket
TUBING
HOSE /
VCR Minimum Maximum
Face Seal Fittings Size Inside Outside
1/4 1.95 (49.5) 0.18 (4.6) 0.73 (18.4)
BALL & PLUG

3/8 2.06 (52.3) 0.28 (7.1) 1.09 (27.7)
VALVES
1/2 2.25 (57.2) 0.40 (10.2) 1.09 (27.7)
A
DIAPHRAGM
BELLOWS,
VALVES
Female VCO O-Ring
Face Seal Fittings
VCO Minimum Maximum
Size Inside Outside
CHECK & RELIEF

1/4 1.68 (42.7) 0.13 (3.3) 0.80 (20.3)
VALVES
3/8 1.40 (35.6) 0.23 (5.8) 1.16 (29.5)
A
1/2 1.81 (46.0) 0.33 (8.4) 1.16 (29.5)
METERING
NEEDLE &
VALVES
Male VCO O-Ring
Face Seal Fittings
VCO Minimum Maximum
Size Inside Outside
INSTRUMENT
MANIFOLD
SYSTEMS
1/4 2.13 (54.1) 0.13 (3.3) 0.73 (18.4)
3/8 2.27 (57.7) 0.23 (5.8) 1.09 (27.7)
A
1/2 2.46 (62.5) 0.33 (8.4) 1.09 (27.7)
MODULAR
SYSTEMD
XBA Adapters
Adapter Minimum Maximum
Size Inside Outside
REGULATORS
& FILTERS
A 1/4 1.55 (39.4) 0.18 (4.6) 0.38 (9.7)
3/8 1.58 (40.1) 0.31 (7.9) 0.58 (14.7)
1/2 1.94 (49.3) 0.39 (9.9) 1.08 (27.4)
MEASUREMENT
3/4 2.03 (51.6) 0.61 (15.5) 1.08 (27.4)

DEVICES
1 2.31 (58.7) 0.86 (21.8) 1.36 (34.5)

1 1/2 3.06 (77.7) 1.36 (34.5) 1.92 (48.8)
MEDIUM- HIGH-
PRESSURE
REFERENCES

FITTINGS
TUBE
End Connections for Field Assembly
XBA Adapters
PIPE, WELD,
VCR, VCO
FITTINGS
Brazing material Select an adapter ordering number.
XBA adapter
Convoluted C T
STANDARD
tubing ID
TUBING
0.25 in. B
■ XBA adapters are brazed or soldered to convoluted (6.4 mm) A
vacuum tubing.
FLEXIBLE
TUBING
HOSE /
■ XBA adapters allow for connecting to socket and butt weld Dimensions, in. (mm)
T Ordering
fittings, Swagelok tube fittings, and Ultra-Torr™ vacuum in. Number A B C
fittings. 1/4 304-4-XBA 0.94 (23.9) 0.69 (17.5) 0.16 (4.1)
■ Material is 304 stainless steel. 3/8 304-6-XBA 1.00 (25.4) 0.75 (19.0) 0.28 (7.1)
BALL & PLUG
VALVES
1/2 304-8-XBA 1.19 (30.2) 0.94 (23.9) 0.38 (9.7)

3/4 304-12-XBA 1.28 (32.5) 1.03 (26.2) 0.60 (15.2)
1 304-16-XBA➀ 1.56 (39.6) 1.31 (33.3) 0.85 (21.6)
1 1/2 304-24-XBA➀ 2.31 (58.7) 2.06 (52.3) 1.35 (34.3)
DIAPHRAGM
BELLOWS,
VALVES
➀ Not recommended for gas service with Swagelok tube fitting.
XOA Adapters
CHECK & RELIEF
Ultra-Torr vacuum fitting

VALVES

Select an adapter ordering number.
XOA adapter
METERING
NEEDLE &
VALVES
Convoluted C T
tubing ID
0.12 in.
(3.1 mm)
■ XOA adapters support the tubing cuff when using A
INSTRUMENT
convoluted vacuum tubing products with Ultra-Torr vacuum

MANIFOLD
SYSTEMS
fittings. Dimensions, in. (mm)

T Ordering
■ XOA adapters provide a leak-tight connection and are in. Number A C
reusable. 1/4 304-4-XOA 0.16 (4.1)
0.75 (19.0)
■ Material is 304 stainless steel. 3/8 304-6-XOA 0.28 (7.1)
MODULAR
SYSTEMD
1/2 304-8-XOA 0.38 (9.7)

3/4 304-12-XOA 0.60 (15.2)
1.00 (25.4)
1 304-16-XOA 0.85 (21.6)
REGULATORS
1 1/2 304-24-XOA 1.35 (34.3)

& FILTERS
Ultra-Torr Vacuum Fittings

MEASUREMENT
DEVICES
Refer to Ultra-Torr Vacuum Fittings

catalog, MS-01-32, for additional
information.
MEDIUM- HIGH-
PRESSURE
REFERENCES
FP Series Hybrid Hose
FITTINGS
TUBE
Features
■ PTFE smooth bore core hose. ■ Commonly used as a low pressure transfer hose where a
■ 316L stainless steel convoluted cover. smooth bore for ultra-high purity is critical and permeation
to the atmosphere is undesirable.
PIPE, WELD,
VCR, VCO
FITTINGS
■ Sizes of 1/4 and 1/2 in. and working pressures from vacuum
to 165 psig (11.3 bar).
STANDARD
TUBING
Cover/Core gap Welded 316L end
connections
316L outer cover
FLEXIBLE
TUBING
HOSE /
PTFE core
BALL & PLUG

SWAGELOK
SWAGELOK
VALVES
DIAPHRAGM
BELLOWS,
VALVES
Technical Data
CHECK & RELIEF

VALVES
Working Minimum
Pressure at Permanent
Minimum Center Line 0 to 120°F Deformation
Bend Radius
Nominal Inside Outside Temperature (–17 to 48°C) Pressure at
in. (cm)
Hose Size Diameter Diameter Range Vacuum to ... 70°F (20°C)
METERING
NEEDLE &
in. (mm) in. (mm) in. (mm) Static Dynamic °F (°C) psig (bar) psig (bar)
VALVES
1/4 (6.4) 0.18 (4.6) 0.38 (9.7) 2.13 (5.4) 4.33 (10.9) 0 to 120 165 (11.3) 464 (32.0)
1/2 (12.7) 0.37 (9.4) 0.73 (18.5) 4.33 (10.9) 6.50 (16.5) (–17 to 48) 165 (11.3) 464 (32.0)
Exceeding the minimum permanent deformation pressure could result in core tube distortion.
INSTRUMENT
MANIFOLD
SYSTEMS
Testing Cleaning and Packaging • Permeation of gases will occur
Every Swagelok FP series hose Each hose is bagged individually and between the PTFE core and
assembly is inboard helium leak tested boxed. the convoluted metal layer.
to a maximum leak rate of 1 × 10 –9 std When system pressure is
MODULAR
SYSTEMD
cm3/s. reduced, reverse permeation
back into the flow path may
For additional testing, see Testing,
occur. Contact your Swagelok
page 108
representative for additional
REGULATORS
information.
& FILTERS
MEASUREMENT
DEVICES
MEDIUM- HIGH-
PRESSURE
REFERENCES

FITTINGS
TUBE
PIPE, WELD,
VCR, VCO
FITTINGS
1 2 3 4 4 5 6 5 6
STANDARD
TUBING
6L - FP 4 TA4 RF4 - 28 - APC or 71CM - APC

in. cm
FLEXIBLE
TUBING
HOSE /
6L = 316L stainless steel column in tables on next page. with a dash between each designator.
APC = Airborne Particle Count
2 Hose 5 Overall Length RGA = Residual Gas Analysis
BALL & PLUG
VALVES
FP = F
P series hose Inches in tenths or centimeters, in UVA = Ultra Violet Inspection
whole numbers. Include CM as shown TOC = Total Organic Carbon
for centimeter lengths. Standard Measurement
3 Nominal Hose Size, in. available lengths between 6-72 inches.
DIAPHRAGM
BELLOWS,
4 = 1/4 8 = 1/2
VALVES
CHECK & RELIEF
VALVES
METERING
NEEDLE &
VALVES
INSTRUMENT
MANIFOLD
SYSTEMS
MODULAR
SYSTEMD
REGULATORS
& FILTERS
MEASUREMENT
DEVICES
MEDIUM- HIGH-
PRESSURE
REFERENCES
FITTINGS
TUBE
End Connections
Butt Weld Connection
PIPE, WELD,
Dimensions
VCR, VCO
FITTINGS
Butt Nominal End Minimum Maximum
Weld Hose Size Connection Inside Outside
SWAGELOK
SWAGELOK

A
STANDARD
1/4 4 TB4 0.84 (21.3) 0.18 (4.6) 0.25 (6.4)
TUBING
1/2 8 TB8 1.06 (26.9) 0.40 (10.2) 0.50 (12.7)

Dimensions
FLEXIBLE
TUBING
HOSE /
SWAGELOK
SWAGELOK

AA Dimensions, in. (mm)
1/4 4 TA4 2.24 (56.9) 0.18 (4.6) 0.25 (6.4)
BALL & PLUG

VALVES
1/2 8 TA8 2.79 (70.9) 0.37 (9.4) 0.50 (12.7)
Rotatable Male
Dimensions
VCR® Metal Gasket
DIAPHRAGM
BELLOWS,
Face Seal Fittings
VALVES
VCR Hose Size Connection Inside Outside
SWAGELOK
SWAGELOK
1/4 4 RM4 2.04 (51.8) 0.18 (4.6) 0.78 (19.8)

A
CHECK & RELIEF

A 1/2 8 RM8 2.35 (59.7) 0.40 (10.2) 1.08 (27.4)
VALVES
Rotatable Female
Dimensions
VCR Metal Gasket
Face Seal Fittings Nominal End Minimum Maximum
METERING
NEEDLE &
VCR Hose Size Connection Inside Outside
VALVES
SWAGELOK
SWAGELOK

1/4 4 RF4 2.04 (51.8) 0.16 (4.1) 0.87 (22.1)
A A
1/2 8 RF8 2.35 (59.7) 0.34 (8.6) 1.23 (31.2)
INSTRUMENT
MANIFOLD
SYSTEMS
Female VCO O-Ring
Dimensions
Face Seal Fittings
VCO Hose Size Connection Inside Outside
MODULAR
SYSTEMD
SWAGELOK
SWAGELOK

A 1/4 4 VF4 1.44 (36.6) 0.19 (4.8) 0.79 (20.1)
1/2 8 VF8 1.66 (41.9) 0.41 (10.4) 1.08 (27.4)
REGULATORS
& FILTERS
MEASUREMENT
DEVICES
MEDIUM- HIGH-
PRESSURE
REFERENCES
T Series PTFE Hose

FITTINGS
TUBE
Features
■ PTFE hose with permeation-resistant features. ■ Select static dissipative hose assemblies are approved to
■ Smooth-bore PTFE core. ECE R110; see page 110 for more information.
PIPE, WELD,
■ Commonly used where chemical compatibility and

VCR, VCO
FITTINGS
■ Size range of 1/4 through 1 in. and working pressures up to

3000 psig (206 bar). permeation resistance is desired.
■ Single braid layer of 304 stainless steel (316L SS and alloy ■ Standard and custom assemblies available.
400 available) ensures hose pressure containment and ■ Options include hose covers, hose tags, and additional
protects the core from abrasion. cleaning. See page 108 for details.
STANDARD
TUBING
■ PTFE material complies with FDA regulation 21CFR ■ For electrical properties, see page 5 for details.
Part 177.1550.
■ Optional carbon black-filled PTFE core is available for
applications that require static dissipation.
FLEXIBLE
TUBING
HOSE /
316 SS and
300 series SS collar or other alloy end
304 SS braid, PTFE core connections
Alloy 400
standard
BALL & PLUG
VALVES
DIAPHRAGM
BELLOWS,
VALVES
Technical Data
CHECK & RELIEF
VALVES
Vacuum Minimum
Minimum Inside (28.5 in.Hg Working Burst Bulk
Bend Radius
Nominal Inside Outside Temperature [96.5 kPa]) Pressure at Pressure at Hose
in. (cm)
Hose Size Diameter Diameter Range Rated to ... 70°F (20°C) 70°F (20°C) Weight
in. (mm) in. (mm) in. (mm) Static Dynamic °F (°C) °F (°C) psig (bar) psig (bar) lb/ft (kg/m)
METERING
NEEDLE &
VALVES
304 SS Braid (TH and TC)

1/4 (6.4) 0.19 (4.8) 0.31 (7.9) 1.50 (3.81) 2.00 (5.08) 450 (230) 3000 (206) 12 000 (826) 0.08 (0.12)
3/8 (9.5) 0.31 (7.9) 0.44 (11.1) 3.50 (8.89) 5.00 (12.7) 450 (230) 2500 (172) 10 000 (689) 0.12 (0.17)
–65 to 450
1/2 (12.7) 0.41 (10.3) 0.56 (14.3) 4.50 (11.4) 6.00 (15.2) 450 (230) 2000 (137) 8 000 (551) 0.15 (0.22)
INSTRUMENT
(–53 to 230)
MANIFOLD
SYSTEMS
3/4 (19.0) 0.63 (15.9) 0.81 (20.6) 6.00 (15.2) 7.50 (19.0) 450 (230) 1500 (103) 6 000 (413) 0.28 (0.41)
1 (25.4) 0.88 (22.2) 1.03 (26.2) 9.00 (22.9) 11.3 (28.7) 400 (204) 1000 (68.9) 4 000 (275) 0.39 (0.58)
Alloy 400 Braid (TL4)
–65 to 450
1/4 (6.4) 0.19 (4.8) 0.31 (7.9) 1.50 (3.81) 2.00 (5.08) 450 (230) 1500 (103) 6 000 (413) 0.08 (0.12)
MODULAR
(–53 to 230)
SYSTEMD
Pressure-Temperature Ratings Testing

REGULATORS
Ratings are based on burst testing. Every Swagelok T series hose

& FILTERS
assembly is pressure tested with water

304 SS Alloy 400 for 30 to 60 seconds at 1.5 times the
Braid Material (TH and TC) (TL4) working pressure to a requirement
Nominal Hose Size of no visible leakage at ambient
MEASUREMENT
in. 1/4 3/8 1/2 3/4 1 1/4

temperature.
DEVICES
Temperature °F (°C) Working Pressure, psig (bar)

–65 (–53) 2250 (155) 2250 (155) 2000 (137) 1500 (103) 1000 (68.9) 1500 (103) Cleaning and Packaging
0 (–17) to 100 (37) 3000 (206) 2500 (172) 2000 (137) 1500 (103) 1000 (68.9) 1500 (103) Swagelok T series hose components
200 (93) 2250 (119) 1875 (129) 1500 (103) 1125 (77.6) 750 (51.7) 1500 (103
MEDIUM- HIGH-
are cleaned in accordance with

PRESSURE
300 (148) to 450 (230) 2250 (119) 1875 (129) 1500 (103) 1125 (77.6) 750 (51.7) 1215 (83.7) Swagelok Standard Cleaning and
Packaging (SC‑10) catalog, MS‑06‑62.
Each hose is bagged individually
and boxed; longer hoses are coiled,
REFERENCES
bagged, and boxed.

T Series PTFE Hose
FITTINGS
TUBE
Standard Length Hose Assemblies
PIPE, WELD,
VCR, VCO
FITTINGS
L
STANDARD
TUBING
OAL
FLEXIBLE
TUBING
HOSE /
Dimensions
Nominal Tube Overall Live End Connection Maximum
Hose Adapter Length Ordering Length Inside Outside
BALL & PLUG

Size Size OAL Number L Diameter Dimension
VALVES
Dimensions, in. in. (cm) in. (cm) in. (mm)
8.00 (20.3) SS-4BHT-6 3.92 (10.0)
14.0 (35.6) SS-4BHT-12 9.92 (25.2)
20.0 (50.8) SS-4BHT-18 15.9 (40.4)
DIAPHRAGM
BELLOWS,
VALVES
26.0 (66.0) SS-4BHT-24 21.9 (55.6)
0.13 0.49
1/4 1/4 38.0 (96.5) SS-4BHT-36 33.9 (86.1)
(3.3) (12.4)
50.0 (127) SS-4BHT-48 45.9 (117)
62.0 (157) SS-4BHT-60 57.9 (147)
CHECK & RELIEF

74.0 (188) SS-4BHT-72 69.9 (178)
VALVES
122 (310) SS-4BHT-120 118 (300)
14.0 (35.6) SS-6BHT-12 9.64 (24.5)
20.0 (50.8) SS-6BHT-18 15.6 (39.6)
26.0 (66.0) SS-6BHT-24 21.6 (54.9)
METERING
NEEDLE &
VALVES
0.23 0.59
3/8 3/8 38.0 (96.5) SS-6BHT-36 33.6 (85.3)
(5.8) (15.0)
50.0 (127) SS-6BHT-48 45.6 (116)
62.0 (157) SS-6BHT-60 57.6 (146)
74.0 (188) SS-6BHT-72 69.6 (177)
INSTRUMENT
MANIFOLD
SYSTEMS
14.5 (36.8) SS-8BHT-12 9.04 (23.0)
20.5 (52.1) SS-8BHT-18 15.0 (38.1)
26.5 (67.3) SS-8BHT-24 21.0 (53.3)
38.5 (97.8) SS-8BHT-36 33.0 (83.8) 0.34 0.78
1/2 1/2
(8.6) (19.8)
MODULAR
50.5 (128) SS-8BHT-48 45.0 (114)
SYSTEMD
62.5 (159) SS-8BHT-60 57.0 (145)
74.5 (189) SS-8BHT-72 69.0 (175)
122.5 (311) SS-8BHT-120 117 (297)
26.5 (67.3) SS-12BHT-24 20.7 (52.6)
REGULATORS
& FILTERS
0.54 1.04
3/4 3/4 38.5 (97.8) SS-12BHT-36 32.7 (83.1)
(13.7) (26.4)
50.5 (128) SS-12BHT-48 44.7 (114)
Dimensions, mm cm (in.) cm (in.) mm (in.)
35.6 (14.0) SS-4MBHT-12 25.2 (9.92)
MEASUREMENT
3.3 12.4
DEVICES
1/4 in. 6 66.0 (26.0) SS-4MBHT-24 55.7 (21.9)

(0.13) (0.49)
96.5 (38.0) SS-4MBHT-36 86.2 (33.9)
67.3 (26.5) SS-8MBHT-24 53.4 (21.0) 8.6 19.8
1/2 in. 12
97.8 (38.5) SS-8MBHT-36 83.9 (33.0) (0.34) (0.78)
MEDIUM- HIGH-
PRESSURE
REFERENCES
T Series PTFE Hose

FITTINGS
TUBE
PIPE, WELD,
VCR, VCO
FITTINGS
1 2 3 4 4 5 6 5 6
STANDARD
TUBING
SS - TH 4 TA4 SL2 - 28 - Z or 71CM-Z

in. cm
FLEXIBLE
TUBING
HOSE /
1 Material 3 Nominal Hose Size, in. 6 Options

End Connections 4 = 1/4 For multiple options, add designators
SS = 316 stainless steel 6 = 3/8 with a dash between each designator.
M = Alloy 400 8 = 1/2
BALL & PLUG
HC = Alloy C-276 12 = 3/4

VALVES
TI = Titanium, grade 4 16 = 1
F = Fire jacket
F1 = Thermosleeve
4 End Connections
Only wetted components will be made See End Connection Designator S =302 SS spring guard, hose-
DIAPHRAGM
BELLOWS,
column in tables on next page.

VALVES
of the requested material, with the length

exception of Alloy 400 on TL hoses. W = Hydrostatic test
Contact your authorized Swagelok 5 Overall Length Z =316 SS braid material (1/4 and
sales and service representative with 3/8 in. TH series hoses only)
CHECK & RELIEF
component material questions. 093 = ECE R110 approval, only on

VALVES
numbers. Include CM as shown for select end connections for

2 Hose
centimeter lengths. TC hose. (See page 110 for
TH =T series PTFE hose with 304 SS additional information.)
braid Mat Tags
METERING
NEEDLE &
TC =T series carbon black-filled MA = Gray MO = Orange

VALVES
PTFE hose with 304 SS braid MB = Blue MP = Purple

TL =T series PTFE hose with MC = Brown MR = Red
alloy 400 braid (1/4 in. hose MG = Green MW = White
size only) MK = Black MY = Yellow
INSTRUMENT
MANIFOLD
SYSTEMS
MN = Pink
Example: MA2
Other Tags
MODULAR
SYSTEMD
T = Lanyard tag
T5 = Clamp tag
Specify text for tags. see Hose Tag
REGULATORS
& FILTERS

of options.
MEASUREMENT
DEVICES
MEDIUM- HIGH-
PRESSURE
REFERENCES
T Series PTFE Hose
FITTINGS
TUBE
End Connections
Swagelok
CA-PH-1174-DM Tube Adapters
Dimensions
Tube Nominal End End Maximum
PIPE, WELD,
VCR, VCO
FITTINGS
Adapter Hose Size Connection Connection Outside
Size Designator Designator A Inside Diameter Dimension
A
1/4 4 TA4➀ 2.04 (51.8) 0.13 (3.3) 0.49 (12.4)
6 TA6➀ 2.18 0.23 0.59 (15.0)
STANDARD
(55.4) (5.8)
TUBING
3/8
8 TA6➀ 2.47 (62.7) 0.26 (6.6)
0.78 (19.8)
1/2 8 TA8➀ 2.73 (69.3) 0.34 (8.6)
12 TA12 2.90 (73.7) 0.54 (13.7) 1.04 (26.4)
3/4
16 TA12 3.37 (85.6) 0.58 (14.7) 1.35 (34.3)
FLEXIBLE
TUBING
HOSE /
12 TA16 3.25 (82.6) 0.54 (13.7) 1.24 (31.5)
1
16 TA16 3.65 (92.7) 0.78 (19.8) 1.35 (34.3)
6 4 TM6➀ 51.8 (2.04)
3.3 (0.13) 12.4 (0.49)
BALL & PLUG

8 4 TM8➀ 53.3 (2.10)
VALVES
10 6 TM10➀ 55.4 (2.18) 5.8 (0.23) 15.0 (0.59)
12 8 TM12➀ 69.3 (2.73) 8.6 (0.34) 19.8 (0.78)
18 12 TM18➀ 73.7 (2.90) 13.7 (0.54) 26.4 (1.04)
25 16 TM25 92.7 (3.65) 19.8 34.3
DIAPHRAGM
(0.78) (1.35)
BELLOWS,
VALVES
➀ ECE R110 approval available.
Female VCO O-Ring

CHECK & RELIEF

Face Seal Fittings
Female VCO O-Ring
VALVES
VCO Nominal End End Maximum
Size Hose Size Connection Connection Outside
in. Designator Designator A Inside Diameter Dimension
1/4 4 VF4 1.84 (46.7) 0.13 (3.3) 0.80 (20.3)
6 VF8 1.92 (48.8) 0.23 (5.8)
1/2 1.16 (29.5)
METERING
NEEDLE &
VALVES
A 8 VF8 2.18 (55.4) 0.34 (8.6)
3/4 12 VF12 2.40 (61.0) 0.54 (13.7) 1.74 (41.2)
1 16 VF16 2.81 (71.4) 0.78 (19.8) 2.03 (51.6)
INSTRUMENT
MANIFOLD
SYSTEMS
Swagelok
CA-PH-0348-CDM Tube Fittings
Dimensions
Tube Nominal End End Maximum
MODULAR
SYSTEMD
SWAGELOK
Fitting Hose Size Connection Connection Outside

Size Designator Designator A Inside Diameter Dimension
A 1/8 4 SL2 2.00 (50.8) 0.09 (2.3) 0.51 (13.0)
1/4 4 SL4➀ 2.10 0.13 0.66
REGULATORS
(53.4) (3.3) (16.8)
3/8 6 SL6➀ 2.27 (57.7) 0.23 (5.8) 0.80 (20.3) & FILTERS
1/2 8 SL8➀ 2.64 (67.1) 0.34 (8.6) 1.02 (25.9)
3/4 12 SL12 2.74 (69.6) 0.54 (13.7) 1.30 (33.0)
MEASUREMENT
DEVICES
6 4 SM6➀ 54.1 (2.13) 3.3 (0.13) 16.8 (0.66)

10 6 SM10➀ 57.9 (2.28) 5.8 (0.23) 22.1 (0.87)
12 8 SM12➀ 67.1 (2.64) 8.6 (0.34) 25.9 (1.02)
18 12 SM18 69.6 (2.74) 13.7 (0.54) 34.8 (1.37)
MEDIUM- HIGH-
PRESSURE

REFERENCES
T Series PTFE Hose

FITTINGS
TUBE

Female
NPT and ISO/BSP Tapered NPT and
(ISO 7) ISO/BSP Dimensions, in. (mm)
NPT and ISO/BSP Tapered (ISO 7)
Tapered Nominal End End Maximum
PIPE, WELD,
VCR, VCO
FITTINGS

NPT
4 PF4 1.91 (48.5) 0.13 (3.3)
1/4 0.87 (22.1)
A 6 PF4 1.94 (49.3)
STANDARD
0.23 (5.8)
TUBING
3/8 6 PF6 2.01 (51.1) 1.02 (25.8)

1/2 8 PF8 2.48 (63.0) 0.34 (8.6) 1.23 (31.2)
3/4 12 PF12 2.57 (65.3) 0.54 (13.7) 1.52 (38.7)
ISO/BSP Tapered
FLEXIBLE
1/4 4 FT4 1.91 (48.5) 0.13 (3.3) 0.87 (22.1)

TUBING
HOSE /
1/2 8 FT8 2.48 (63.0) 0.34 (8.6) 1.23 (31.2)

BALL & PLUG
Male Pipe Threads,

VALVES
Male
NPT and ISO/BSP Tapered NPT and
(ISO 7) ISO/BSP Dimensions, in. (mm)
Tapered Nominal End End Maximum
Male Pipe Threads, NPT and ISO/BSP Tapered (ISO 7)

DIAPHRAGM

BELLOWS,
VALVES
NPT
4 PM4➀ 1.96 (49.8) 0.13 (3.3)
A 0.66 (16.8)
1/4 6 PM4➀ 2.04 (51.8) 0.23 (5.8)
CHECK & RELIEF
8 PM4 2.31 (58.7) 0.28 (7.1)

VALVES
6 PM6➀ 2.07 (52.6) 0.23 (5.8) 0.80 (20.3)

3/8
8 PM6➀ 2.31 (58.7)
0.34 (8.6)
8 PM8➀ 2.52 (64.0) 1.02 (25.8)
1/2
12 PM8 1.16 (29.5)
2.63 (86.8) 0.54 (13.7)
METERING
NEEDLE &
12 PM12 1.23 (31.2)

VALVES
3/4
16 PM12 3.11 (79.0) 0.63 (16.0) 1.45 (36.8)
1 16 PM16 3.32 (84.3) 0.78 (19.8) 1.60 (40.5)
ISO/BSP Tapered
INSTRUMENT
1/4 4 MT4➀ 1.96 (49.8) 0.13 (3.3) 0.66 (16.8)

MANIFOLD
SYSTEMS
1/2 8 MT8➀ 2.52 (64.0) 0.34 (8.6) 1.02 (25.8)

3/4 12 MT12 2.63 (66.8) 0.54 (13.7) 1.23 (31.2)
1 16 MT16 3.32 (84.3) 0.78 (19.8) 1.60 (40.5)
MODULAR
SYSTEMD
Female VCR Metal Gasket

Face Seal Fittings
Female VCR Metal Gasket Face Seal Fitting
VCR Nominal End End Maximum
REGULATORS
& FILTERS

1/4 4 RF4 2.16 (54.9) 0.13 (3.3) 0.87 (22.1)
1/2 8 RF8 2.40 (61.0) 0.34 (8.6) 1.23 (31.2)
A 3/4 12 RF12 2.88 (73.2) 0.54 (13.7) 1.74 (44.2)
MEASUREMENT
1 16 RF16 3.48 (88.4) 0.78 (19.8) 2.03 (51.6)

DEVICES
MEDIUM- HIGH-
PRESSURE
REFERENCES
T Series PTFE Hose
FITTINGS
TUBE
SAE 37° (JIC) Male Flare
SAE 37º (JIC) Male Flare
JIC Dimensions, in. (mm)
Flare Nominal End End Maximum
PIPE, WELD,
VCR, VCO
FITTINGS
A 1/4 4 AN4➀ 1.98 (50.3) 0.13 (3.3) 0.59 (15.0)
3/8 6 AN6➀ 2.05 (52.1) 0.23 (5.8) 0.73 (18.5)
1/2 8 AN8➀ 2.43 (61.7) 0.34 (8.6) 0.94 (23.9)
STANDARD
TUBING
JIC Dimensions, in. (mm)
SwivelSAE 37º (JIC) Female Swivel Cutout
Swivel Nominal End End Maximum
FLEXIBLE
TUBING
Designator Designator A Inside Diameter Dimension
HOSE /
37º in.
1/4 4 AS4 2.05 (52.1) 0.13 (3.3) 0.73 (18.5)
3/8 6 AS6 2.21 (56.1) 0.23 (5.8) 0.87 (22.1)
A 1/2 8 AS8 2.53 (64.3) 0.34 (8.6) 1.09 (27.7)
BALL & PLUG

VALVES
Sanitary Kwik-Clamps
Sanitary Kwik-Clamp Cutout
Kwik- Dimensions, in. (mm)
DIAPHRAGM
Clamp Nominal End End Maximum B, Flange
BELLOWS,
VALVES
Size Hose Size Connection Connection Outside Face Inside
B
in. Designator Designator A Inside Diameter Dimension Diameter
1/2 8 KC8 2.28 (57.9) 0.34 (8.6) 0.99 (25.1) 0.37 (9.4)
A 3/4 12 KC12 2.20 (55.9) 0.54 (13.7) 1.04 (26.4) 0.62 (15.7)
CHECK & RELIEF

1 16 KC16 2.64 (67.0) 0.87 (22.1)
VALVES
0.78 (19.8) 1.98 (50.3)
1 1/2 16 KC24 2.48 (63.0) 1.37 (34.8)
Working pressure and temperature ratings of hoses with sanitary Kwik-Clamp end connections may be
limited by the gasket material and clamp. Maximum pressure rating is 300 psig (20.6 bar).
METERING
NEEDLE &
VALVES
INSTRUMENT
MANIFOLD
SYSTEMS
MODULAR
SYSTEMD
REGULATORS
& FILTERS
MEASUREMENT
DEVICES
MEDIUM- HIGH-
PRESSURE
REFERENCES
B Series PTFE Hose

FITTINGS
TUBE
Features
■ General purpose PTFE hose. ■ Commonly used where chemical compatibility is desired.
■ Smooth-bore PTFE core. ■ Custom hose lengths and end connections available.
PIPE, WELD,
VCR, VCO
FITTINGS
■ 1/8 in. size and working pressure of 3000 psig (206 bar). ■ Options include hose covers, hose tags, and additional
■ 304 stainless steel braid ensures hose pressure cleaning. See page 108 for details.
containment and protects the core from abrasion. ■ For electrical properties, see page 5 for details.
■ PTFE material complies with FDA regulation 21CFR Part
STANDARD
177.1550 and USP <88> Class VI, and is free of TSE, BSE,
TUBING
and ADI as defined in EMEA/410/01.
304 SS braid PTFE core 300 series SS collar 316 SS end

connections
FLEXIBLE
TUBING
HOSE /
BALL & PLUG
VALVES
DIAPHRAGM
BELLOWS,
VALVES
Technical Data
Vacuum Working Minimum
Minimum Inside (28.5 in.Hg Pressure at Burst Bulk
Bend Radius
Nominal Inside Outside Temperature [96.5 kPa]) –65 to 450°F Pressure at Hose
CHECK & RELIEF
in. (cm)
Hose Size Diameter Diameter Range Rated to ... (–53 to 230°C) 70°F (20°C) Weight
VALVES
–65 to 450
1/8 (3.2) 0.125 (3.2) 0.25 (6.4) 1.50 (3.81) 3.75 (9.52) 450 (230) 3000 (206) 12 000 (826) 0.05 (0.07)
(–53 to 230)
METERING
NEEDLE &
VALVES
Pressure-Temperature Ratings Testing Cleaning and Packaging

Every Swagelok B series hose Every Swagelok B series hose
INSTRUMENT

MANIFOLD
SYSTEMS
°F (°C) psig (bar) assembly is pressure tested with water component is cleaned in accordance
at room temperature for 30 seconds to with Swagelok Standard Cleaning and
–65 (–53) to 450 (230) 3000 (206)
a requirement of no detectable leakage. Packaging (SC‑10) catalog, MS‑06‑62.
Testing is performed at a minimum
of 1000 psig (69 bar), or 225 psig
MODULAR
SYSTEMD
(15.5 bar) if an end connection is rated

below 1000 psig (69 bar).
REGULATORS
& FILTERS
MEASUREMENT
DEVICES
MEDIUM- HIGH-
PRESSURE
REFERENCES
B Series PTFE Hose
FITTINGS
TUBE
PIPE, WELD,
VCR, VCO
FITTINGS
STANDARD
TUBING
1 2 3 4 4 5 6 5 6
FLEXIBLE
TUBING
HOSE /
SS - BT 2 TA2 PM2 - 28 - MB or 71CM - MB
in. cm
BALL & PLUG

VALVES
SS = 316 stainless steel column in tables on pages 74 to 83 with a dash between each designator.
HC = Alloy C-276 C=A STM G93 Level C cleaning on
DIAPHRAGM
BELLOWS,
5 Overall Length hose wetted surfaces
VALVES
2 Hose
Inches or centimeters, in whole F = Fire jacket
BT = B series PTFE hose numbers. Include CM as shown for W = Hydrostatic test
centimeter lengths. Splices
CHECK & RELIEF

3 Nominal Hose Size, in. SP1 = 1 splice
Typical maximum one-piece hose
VALVES
2 = 1/8 SP2 = 2 splices
length is 900 in. or 2286 cm. Longer
assemblies may be spliced; specify Mat Tags
splices under Options. See page 4 MA = Gray MO = Orange
for more information about splices. MB = Blue MP = Purple
METERING
NEEDLE &
MC = Brown MR = Red
VALVES
MN = Pink
INSTRUMENT
MANIFOLD
SYSTEMS
Example: MA2
Other Tags
T = Lanyard tag
MODULAR
SYSTEMD
T5 = Clamp tag
REGULATORS
of options. & FILTERS
MEASUREMENT
DEVICES
MEDIUM- HIGH-
PRESSURE
REFERENCES
X Series PTFE Hose

FITTINGS
TUBE
Features
■ Highly flexible PTFE hose. ■ Optional carbon black-filled PTFE core is available for
■ Smooth-bore PTFE core. applications that require static dissipation.
PIPE, WELD,
■ Commonly used where flexibility and chemical

VCR, VCO
FITTINGS

3500 psig (241 bar). compatibility are desired.
■ Fiber braid bonded to the core with a patent-pending ■ Custom hose lengths and end connections available.
process supports core to resist kinking. ■ Options include hose covers, hose tags, and additional
cleaning. See page 108 for details.
STANDARD
■ 304 stainless steel braid protects the core from abrasion

TUBING
and enhances hose pressure rating. ■ For electrical properties, see page 5 for details.
177.1550 and USP <88> Class VI, and is free of TSE, BSE,
FLEXIBLE
TUBING
HOSE /
304 SS braid Fiber braid PTFE core 300 series SS collar 316 SS
end connections
BALL & PLUG
VALVES
DIAPHRAGM
BELLOWS,
VALVES
Technical Data
CHECK & RELIEF
VALVES
Vacuum Minimum
Bend Radius
in. (cm)
METERING
NEEDLE &
VALVES
1/4 (6.4) 0.25 (6.4) 0.46 (11.7) 1.25 (3.18) 4.20 (10.7) 450 (230) 3500 (241) 14 000 (964) 0.13 (0.19)
3/8 (9.6) 0.38 (9.6) 0.57 (14.5) 1.75 (4.44) 4.40 (11.2) 450 (230) 3000 (206) 12 000 (826) 0.17 (0.25)
–65 to 450
1/2 (12.7) 0.50 (12.7) 0.76 (19.3) 2.50 (6.35) 4.55 (11.6) 450 (230) 1800 (124) 7 200 (496) 0.24 (0.36)
(–53 to 230)
3/4 (19.0) 0.75 (19.0) 1.00 (25.4) 3.50 (8.89) 6.38 (16.2) 200 (93) 1250 (86.1) 5 000 (344) 0.36 (0.54)
INSTRUMENT
MANIFOLD
SYSTEMS
1 (25.4)➀ 1.00 (25.4) 1.32 (33.5) 5.50 (14.0) 7.15 (18.2) 150 (65) 1000 (68.9) 4 000 (275) 1.1 (1.6)
➀ Constructed with two stainless steel braids and no fiber braid reinforcement.
MODULAR
SYSTEMD
Nominal Hose Size, in. 1/4 3/8 1/2 3/4 1
Temperature, °F (°C) Working Pressure, psig (bar)
REGULATORS
& FILTERS
–65 (–53) to 100 (37) 3500 (241) 3000 (206) 1800 (124) 1250 (86.1) 1000 (68.9)
200 (93) 3500 (241) 2345 (161) 1800 (124) 1135 (78.2) 1000 (68.9)
300 (148) 3460 (238) 1965 (135) 1790 (123) 1010 (69.5) 895 (61.6)
400 (204) 3265 (224) 1810 (124) 1665 (114) 900 (62.0) 895 (61.6)
450 (230) 3205 (220) 1675 (115) 1665 (114) 900 (62.0) 895 (61.6)
MEASUREMENT
DEVICES
MEDIUM- HIGH-
PRESSURE
REFERENCES
X Series PTFE Hose
FITTINGS
TUBE
Testing Cleaning and Packaging
Every Swagelok X series hose assembly is pressure Every Swagelok X series hose
tested with water at room temperature for 30 seconds to a component is cleaned in accordance
requirement of no detectable leakage. Testing is performed at
PIPE, WELD,
with Swagelok Standard Cleaning and
VCR, VCO
FITTINGS
1000 psig (69 bar), or 225 psig (15.5 bar) if an end connection Packaging (SC‑10) catalog, MS‑06‑62.
is rated below 1000 psig (69 bar).
STANDARD
TUBING
FLEXIBLE
TUBING
HOSE /
BALL & PLUG

VALVES
1 2 3 4 4 5 6 5 6 7
SS - XT 8 TA8 KC16 - 28 - MB or 71CM - MB
in. cm
DIAPHRAGM
BELLOWS,
VALVES
1 Material 5 Overall Length 6 Options
End Connections Inches or centimeters, in whole For multiple options, add designators with a
SS = 316 stainless steel numbers. Include CM as shown dash between each designator.
CHECK & RELIEF

B = Brass (only on 1/4 in. PM, PF, for centimeter lengths. A = Armor guard
VALVES
and 1/4 in. hose size) C=A STM G93 Level C cleaning on
HC = Alloy C-276 hose wetted surfaces
length:
■ 900 in. or 2286 cm for 1/4 F = Fire jacket
2 Hose through 1/2 in. hose G6 = Spiral guard, black
METERING
NEEDLE &
VALVES
XT = X series PTFE hose G7 = Spiral guard, blue
■ 600 in. or 1524 cm for 3/4 and
XC =X series carbon black-filled G8 = Spiral guard, yellow
1 in. hose. W = Hydrostatic test
PTFE hose
Longer assemblies may be Splices
3 Nominal Hose Size, in. spliced; specify splices under
INSTRUMENT
SP1 = 1 splice
MANIFOLD
SYSTEMS
4 = 1/4 Options. See page 4 for SP2 = 2 splices
6 = 3/8 more information about splices. Mat Tags
8 = 1/2 MA = Gray MO = Orange
12 = 3/4 MB = Blue MP = Purple
16 = 1
MODULAR
SYSTEMD
MC = Brown MR = Red
4 End Connections MG = Green MW = White
See End Connection Designator MN = Pink
column in tables on pages 74 to 83. Add 2 to the end of the Mat Tag designator
REGULATORS
& FILTERS
for two tags. Example: MA2
Other Tags
T = Lanyard tag
MEASUREMENT
T5 = Clamp tag
DEVICES
Specify text for tags. see Hose Tag Text

table, page 109.
See page 108 for detailed descriptions of
MEDIUM- HIGH-
options.
PRESSURE
7 Two Elbow Orientation

Only include a value in the assembly number
when both end connections are elbows.
See page 77 for values and further
REFERENCES
information.
S Series PTFE Hose

FITTINGS
TUBE
Features
■ Highly flexible, silicone-covered PTFE hose. ■ PTFE material complies with FDA regulation 21CFR Part
■ Smooth-bore PTFE core. 177.1550, USP <88> Class VI (121°C), 3-A (for hose sizes
PIPE, WELD,
3/4 and 1 in.), and is free of TSE, BSE, and ADI as defined
VCR, VCO
FITTINGS

in EMEA/410/01.
3500 psig (241 bar).
■ Optional carbon black-filled PTFE core is available for
■ Fiber braid bonded to the core with a patent-pending
process supports core to resist kinking.
■ Commonly used where flexibility and chemical
STANDARD
■ 304 stainless steel braid protects the core from abrasion

TUBING
compatibility are desired.

and enhances hose pressure rating.
■ Custom hose lengths and end connections available.
■ Silicone cover provides smooth, noncontaminating, easy-
to-clean surface and insulation from internal system fluid ■ Options include hose covers, hose tags, and additional
temperature extremes. cleaning. See page 108 for details.
FLEXIBLE
TUBING
HOSE /
Silicone 304 SS braid Fiber braid PTFE core 300 series SS collar 316 SS
BALL & PLUG
cover end connections

VALVES
DIAPHRAGM
BELLOWS,
VALVES
CHECK & RELIEF
VALVES
Technical Data
Vacuum Minimum
Bend Radius
METERING
NEEDLE &
in. (cm)
VALVES
1/8 (3.2)➀ 0.125 (3.2) 0.42 (10.7) 1.50 (3.81) 3.75 (9.52) 400 (204) 3000 (206) 12 000 (826) 0.09 (0.13)
1/4 (6.4) 0.25 (6.4) 0.55 (14.0) 1.25 (3.18) 4.20 (10.7) 400 (204) 3500 (241) 14 000 (964) 0.19 (0.28)
INSTRUMENT
MANIFOLD
SYSTEMS
3/8 (9.6) 0.38 (9.6) 0.71 (18.0) 1.75 (4.44) 4.40 (11.2) –65 to 400 400 (204) 3000 (206) 12 000 (826) 0.25 (0.37)
1/2 (12.7) 0.50 (12.7) 0.86 (21.8) 2.50 (6.35) 4.55 (11.6) (–53 to 204) 400 (204) 1800 (124) 7 200 (496) 0.34 (0.51)
3/4 (19.0) 0.75 (19.0) 1.12 (28.4) 3.50 (8.89) 6.38 (16.2) 200 (93) 1250 (86.1) 5 000 (344) 0.47 (0.70)
1 (25.4)➁ 1.00 (25.4) 1.55 (39.4) 5.50 (14.0) 7.15 (18.2) 150 (65) 1000 (68.9) 4 000 (275) 1.8 (2.7)
MODULAR
SYSTEMD

➀ Constructed with no fiber braid reinforcement.
➁ Constructed with two stainless steel braids and no fiber braid reinforcement.
REGULATORS
& FILTERS
Nominal Hose Size, in. 1/8 1/4 3/8 1/2 3/4 1

MEASUREMENT
–65 (–53) to 100 (37) 3000 (206) 3500 (241) 3000 (206) 1800 (124) 1250 (86.1) 1000 (68.9)
DEVICES
200 (93) 3000 (206) 3500 (241) 2650 (182) 1800 (124) 1250 (86.1) 1000 (68.9)
300 (148) 2610 (179) 3435 (236) 2510 (172) 1800 (124) 1250 (86.1) 1000 (68.9)
400 (204) 2550 (175) 3320 (228) 2495 (171) 1800 (124) 1250 (86.1) 1000 (68.9)
MEDIUM- HIGH-
PRESSURE
REFERENCES
S Series PTFE Hose
FITTINGS
TUBE
Every Swagelok S series hose Testing is performed at 1000 psig Every Swagelok S series hose
assembly is pressure tested with water (69 bar), or 225 psig (15.5 bar) if an end component is cleaned in accordance
at room temperature for 30 seconds to connection is rated below 1000 psig with Swagelok Standard Cleaning and
PIPE, WELD,
VCR, VCO
FITTINGS
a requirement of no detectable leakage. (69 bar). Packaging (SC‑10) catalog, MS‑06‑62.
STANDARD
TUBING
FLEXIBLE
TUBING
HOSE /
BALL & PLUG

VALVES
1 2 3 4 4 5 6 5 6 7
SS - ST 8 TA8 KC16 - 28 - PB or 71CM - PB
in. cm
DIAPHRAGM
BELLOWS,
VALVES
1 Material 6 Options
End Connections For multiple options, add designators Perma Tags

SS = 316 stainless steel with a dash between each designator. (not available in 1/8 in. hose size)
PA = Gray PO = Orange
CHECK & RELIEF

B = Brass (only on 1/4 in. PM, PF, A = Armor guard
VALVES
and 1/4 in. hose size) C=A STM G93 Level C cleaning PB = Blue PP = Purple
HC = Alloy C-276 on hose wetted surfaces PC = Brown PR = Red
F = Fire jacket PG = Green PW = White
2 Hose
G6 = Spiral guard, black (not PK = Black PY = Yellow
ST =S series PTFE hose with available in 1/8 in. ST hose PN = Pink
METERING
NEEDLE &
VALVES
silicone-cover size) Add 2 to the end of the Perma Tag
SC =S series carbon black-filled G7 = Spiral guard, blue (not designator for two tags.
PTFE hose with silicone cover available in 1/8 in. ST hose Example: PA2
(not available in 1/8 in. hose size) size) Other Tags
INSTRUMENT
G8 = Spiral guard, yellow (not
MANIFOLD
T = Lanyard tag
SYSTEMS
available in 1/8 in. ST hose T2 = Two lanyard tags
2 = 1/8 (ST series only)
size)
4 = 1/4 Specify text for tags. see Hose Tag
6 = 3/8 Text table, page 109.
8 = 1/2 Splices
MODULAR
SYSTEMD
12 = 3/4 SP1 = 1 splice
SP2 = 2 splices of options.
16 = 1
Mat Tags
4 End Connections MA = Gray MO = Orange
See End Connection Designator MB = Blue MP = Purple
REGULATORS
& FILTERS
Only include a value in the assembly
column in tables on pages 74 to 83. MC = Brown MR = Red
number when both end connections are
5 Overall Length elbows. See page 77 for values and
Inches or centimeters, in whole further information.
MN = Pink
MEASUREMENT
numbers. Include CM as shown for Add 2 to the end of the Mat Tag
DEVICES
centimeter lengths. designator for two tags.

Typical maximum one-piece hose length: Example: MA2
■ 900 in. or 2286 cm for 1/4 through
1/2 in. hose
MEDIUM- HIGH-
PRESSURE
■ 600 in. or 1524 cm for 3/4 and 1 in.

hose.
Longer assemblies may be spliced;
specify splices under Options. See page
REFERENCES
4 for more information about splices.

C Series PTFE Hose

FITTINGS
TUBE
Features
■ Low-weight, highly flexible PTFE hose. ■ Optional carbon black-filled PTFE core is available for
■ Helical convoluted bore PTFE core. applications that require static dissipation.
PIPE, WELD,
■ Commonly used where high flexibility and chemical

VCR, VCO
FITTINGS

1500 psig (103 bar). compatibility are desired.
■ 300 series stainless steel braid ensures hose pressure ■ Custom hose lengths and end connections available.
containment and protects the core from abrasion. ■ Options include hose covers, hose tags, and additional
STANDARD

TUBING
177.1550 and USP <88> Class VI, and is free of TSE, BSE, ■ For electrical properties, see page 5 for details.
FLEXIBLE
TUBING
HOSE /
Helical convoluted PTFE core

316 SS
304 SS braid 300 series SS collar end connections
BALL & PLUG
VALVES
DIAPHRAGM
BELLOWS,
VALVES
Technical Data
CHECK & RELIEF
VALVES
Vacuum Minimum
Bend Radius
Nominal Inside Outside Temperature [96.5 kPa]) Pressure Pressure Hose
in. (cm)
Hose Size Diameter Diameter Range Rated to ... at 70°F (20°C) at 70°F (20°C) Weight
1/2 (12.7) 0.50 (12.7) 0.76 (19.3) 2.50 (6.35) 3.75 (9.52) 450 (230) 1500 (103) 6000 (413) 0.20 (0.30)
METERING
NEEDLE &
VALVES
–65 to 450
3/4 (19.0) 0.75 (19.0) 1.00 (25.4) 3.00 (7.62) 3.90 (9.91) 450 (230) 1100 (75.7) 4400 (303) 0.28 (0.42)
(–53 to 230)
1 (25.4) 1.00 (25.4) 1.32 (33.5) 5.50 (14.0) 7.15 (18.2) 200 (93) 750 (51.6) 3000 (206) 0.47 (0.70)
1 1/2 (38.1) 1.50 (38.1) 2.03 (51.6) 6.00 (15.2) 7.80 (19.8) –20 to 340 150 (65) 700 (48.2) 2800 (192) 0.83 (1.2)
2 (50.8) 2.00 (50.8) 2.54 (64.5) 7.50 (19.0) 9.75 (24.8) (–28 to 171) — 525 (36.1) 2100 (144) 1.02 (1.5)
INSTRUMENT
MANIFOLD
SYSTEMS
MODULAR
SYSTEMD
Nominal Hose Size, in. 1/2➀ 3/4➀ 1➀ 1 1/2➀ 2➀

–65 (–53) 1500 (103) 1100 (75.7) 750 (51.6) — —
–20 (–28) 1500 (103) 1100 (75.7) 750 (51.6) 675 (46.5) 525 (36.1)
REGULATORS
& FILTERS
0 (–17) to 100 (37) 1500 (103) 1100 (75.7) 750 (51.6) 700 (48.2) 525 (36.1)
200 (93) 1500 (103) 1100 (75.7) 700 (48.2) 435 (29.9) 525 (36.1)
300 (148) 1500 (103) 1100 (75.7) 620 (42.7) 405 (27.9) 495 (34.1)
340 (171) 1500 (103) 1030 (70.9) 600 (41.3) 330 (22.7) 485 (33.4)
400 (204) 1500 (103) 960 (66.1) 565 (38.9) — —
MEASUREMENT
450 (230) 1500 (103) 900 (62.0) 490 (33.7) — —

DEVICES
➀ H
ose with carbon black-filled PTFE core (CC series) is limited to 340°F (171°C).
MEDIUM- HIGH-
PRESSURE
REFERENCES
C Series PTFE Hose
FITTINGS
TUBE
Every Swagelok C series hose ■ For hose assemblies over 1 in., Every Swagelok C series hose
assembly is pressure tested with water testing is performed at 500 psig component is cleaned in accordance
at room temperature for 30 seconds to (34.4 bar), or 225 psig (15.5 bar) if with Swagelok Standard Cleaning and
PIPE, WELD,
VCR, VCO
FITTINGS
a requirement of no detectable leakage. an end connection is rated below Packaging (SC‑10) catalog, MS‑06‑62.
■ For hose assemblies 1 in. and under, 500 psig (34.4 bar).
testing is performed at 1000 psig
(69 bar), or 225 psig (15.5 bar) if
STANDARD
an end connection is rated below
TUBING
1000 psig (69 bar).
FLEXIBLE
TUBING
HOSE /
BALL & PLUG

VALVES
DIAPHRAGM
BELLOWS,
1 2 3 4 4 5 6 5 6 7
VALVES
SS - CT 8 TA8 KC16 - 28 - MB or 71CM -MB
in. cm
CHECK & RELIEF

1 Material 5 Overall Length
VALVES
End Connections Inches or centimeters, in whole Mat Tags
SS = 316 stainless steel numbers. Include CM as shown for MA = Gray MO = Orange
HC = Alloy C-276 centimeter lengths. MB = Blue MP = Purple
MC = Brown MR = Red
METERING
NEEDLE &
VALVES
2 Hose length:
CT = C series helical convoluted PTFE MK = Black MY = Yellow
■ 900 in. or 2286 cm for 1/2 in. hose MN = Pink
hose
CC = C series convoluted, carbon ■ 600 in. or 1524 cm for 3/4 and 1 in. Add 2 to the end of the Mat Tag
hose designator for two tags.
INSTRUMENT
black-filled PTFE hose
MANIFOLD
SYSTEMS
■ 300 in. or 762 cm for 1 1/2 and 2 in. Example: MA2
3 Nominal Hose Size, in. hose. Other Tags
T = Lanyard tag
8 = 1/2 Longer assemblies may be spliced;
12 = 3/4 specify splices under Options. See
T5 = Clamp tag
MODULAR
SYSTEMD
16 = 1 page 4 for more information about
24 = 1 1/2 splices. Specify text for tags. see Hose Tag
32 = 2 Text table, page 109.
6 Options See page 108 for detailed descriptions
4 End Connections For multiple options, add designators of options.
REGULATORS
See End Connection Designator with a dash between each designator. & FILTERS
column in tables on pages 74 to 83. A = Armor guard
C = ASTM G93 Level C cleaning on Only include a value in the assembly
hose wetted surfaces number when both end connections are
MEASUREMENT
F = Fire jacket elbows. See page 77 for values and

DEVICES
G6 = Spiral guard, black further information.

G7 = Spiral guard, blue
G8 = Spiral guard, yellow
MEDIUM- HIGH-
PRESSURE
Splices
SP1 = 1 splice
SP2 = 2 splices
REFERENCES
J Series PTFE Hose

FITTINGS
TUBE
Features
■ Low-weight, highly flexible PTFE hose. ■ PTFE material complies with FDA regulation 21CFR Part
■ Helical convoluted bore PTFE core. 177.1550, USP <88> Class VI, 3-A (for hose sizes 3/4
and 1 in.), and is free of TSE, BSE, and ADI as defined in
PIPE, WELD,
VCR, VCO
FITTINGS

EMEA/410/01.
1500 psig (103 bar).
■ Commonly used where high flexibility and chemical
■ 300 series stainless steel braid ensures hose pressure
compatibility are desired.
containment and protects the core from abrasion.
■ Custom hose lengths and end connections available.
STANDARD

TUBING
to-clean surface and insulation from internal system fluid ■ Options include hose covers, hose tags, and additional
temperature extremes. cleaning. See page 108 for details.
FLEXIBLE
TUBING
HOSE /
Silicone cover Helical convoluted PTFE core

316 SS
304 SS braid 300 series SS collar end connections
BALL & PLUG
VALVES
DIAPHRAGM
BELLOWS,
VALVES
Technical Data
CHECK & RELIEF
VALVES
Vacuum Minimum
Bend Radius
Nominal Inside Outside Temperature [96.5 kPa]) Pressure Pressure Hose
in. (cm)
Hose Size Diameter Diameter Range Rated to ... at 70°F (20°C) at 70°F (20°C) Weight
1/2 (12.7) 0.50 (12.7) 0.88 (22.4) 2.50 (6.35) 3.75 (9.52) 400 (204) 1500 (103) 6000 (413) 0.28 (0.42)
METERING
NEEDLE &
VALVES
–65 to 400
3/4 (19.0) 0.75 (19.0) 1.12 (28.4) 3.00 (7.62) 3.90 (9.91) 400 (204) 1100 (75.7) 4400 (303) 0.40 (0.60)
(–53 to 204)
1 (25.4) 1.00 (25.4) 1.47 (37.3) 5.50 (14.0) 7.15 (18.2) 200 (93) 750 (51.6) 3000 (206) 0.72 (1.1)
INSTRUMENT
MANIFOLD
SYSTEMS
Nominal Hose Size, in. 1/2 3/4 1
MODULAR
SYSTEMD
–65 (–53) 1500 (103) 1100 (75.7) 750 (51.6)

–20 (–28) 1500 (103) 1100 (75.7) 750 (51.6)
0 (–17) to 100 (37) 1500 (103) 1100 (75.7) 750 (51.6)
200 (93) 1500 (103) 1100 (75.7) 750 (51.6)
300 (148) 1500 (103) 1095 (75.4) 620 (42.7)
REGULATORS
340 1500 (103) 1075 (74.0) 595 (40.9)

& FILTERS
(171)
400 (204) 1500 (103) 1050 (72.3) 555 (38.2)
450 (230) — — —
MEASUREMENT
DEVICES
MEDIUM- HIGH-
PRESSURE
REFERENCES
J Series PTFE Hose
FITTINGS
TUBE
Every Swagelok J series hose assembly is pressure Every Swagelok J series hose component is cleaned in
tested with water at room temperature for 30 seconds to a accordance with Swagelok Standard Cleaning and Packaging
requirement of no detectable leakage. (SC‑10) catalog, MS‑06‑62.
PIPE, WELD,
VCR, VCO
FITTINGS
■ Testing is performed at 1000 psig (69 bar), or 225 psig
(15.5 bar) if an end connection is rated below 1000 psig (69
bar).
STANDARD
TUBING
FLEXIBLE
TUBING
HOSE /
BALL & PLUG

VALVES
DIAPHRAGM
BELLOWS,
1 2 3 4 4 5 6 5 6 7
VALVES
SS - JT 8 TA8 KC16 - 28 - MB or 71CM -MB
in. cm
CHECK & RELIEF

Perma Tags
VALVES
End Connections For multiple options, add designators PB = Blue PP = Purple
SS = 316 stainless steel with a dash between each designator. PC = Brown PR = Red
HC = Alloy C-276
A = Armor guard PG = Green PW = White
METERING
NEEDLE &
VALVES
C = ASTM G93 Level C cleaning on PK = Black PY = Yellow
2 Hose
hose wetted surfaces PN = Pink
JT = J series helical convoluted PTFE F = Fire jacket Add 2 to the end of the Perma Tag
hose with silicone cover G6 = Spiral guard, black designator for two tags.
G7 = Spiral guard, blue Example: PA2
INSTRUMENT
MANIFOLD
SYSTEMS
3 Nominal Hose Size, in. W = Hydrostatic test 6 Options
8 = 1/2 Splices Other Tags
12 = 3/4 SP1 = 1 splice T = Lanyard tag
16 = 1
MODULAR
SP2 = 2 splices
SYSTEMD
Mat Tags
See End Connection Designator MB = Blue MP = Purple
MC = Brown MR = Red See page 108 for detailed descriptions
column in tables on pages 74 to 83.
REGULATORS
& FILTERS
MG = Green MW = White of options.
5 Overall Length MK = Black MY = Yellow
MN = Pink 7 Two Elbow Orientation
Inches or centimeters, in whole numbers. Add 2 to the end of the Mat Tag Only include a value in the assembly
Include CM as shown for centimeter
MEASUREMENT
designator for two tags. number when both end connections are
lengths.
DEVICES
Example: MA2 elbows. See page 77 for values and

Typical maximum one-piece hose length: further information.
■ 900 in. or 2286 cm for 1/2 in. hose
■ 600 in. or 1524 cm for 3/4 and 1 in.
MEDIUM- HIGH-
PRESSURE
hose
specify splices under Options. See page
4 for more information about splices.
REFERENCES
N Series PTFE Hose

FITTINGS
TUBE
Features
■ Nonmetallic PTFE hose. ■ PTFE material complies with FDA regulation 21CFR Part
■ Helical convoluted bore, carbon black-filled PTFE core for 177.1550, USP <88> Class VI, and is free of TSE, BSE, and
ADI as defined in EMEA/410/01.
PIPE, WELD,

VCR, VCO
FITTINGS
■ 3/8, 1/2, and 3/4 in. sizes and working pressures up to ■ Commonly used where flexibility, chemical compatibility,
1250 psig (86.1 bar). and a nonconductive braid are desired.
■ Internal insulating wrap eliminates need for external ■ Custom hose lengths and end connections available.
insulation in many applications. ■ Options include hose covers, hose tags, and additional
STANDARD
TUBING
■ Aramid fiber braid aids pressure containment and cleaning. See page 108 for details.
maintains flexibility while reducing weight. ■ For electrical properties, see page 5 for details.
FLEXIBLE
TUBING
HOSE /
Aramid fiber braid Ceramic wrap Helical convoluted bore, 316 SS

carbon black-filled PTFE core end connections
BALL & PLUG
VALVES
DIAPHRAGM
BELLOWS,
VALVES
300 series SS collar

CHECK & RELIEF
VALVES
Technical Data
Vacuum Minimum
Bend Radius
in. (cm)
METERING
NEEDLE &
VALVES
3/8 (9.6) 0.37 (9.4) 0.70 (17.8) 2.50 (6.35) 4.00 (10.2) 450 (230) 1250 (86.1) 5000 (344) 0.12 (0.18)
–65 to 450
1/2 (12.7) 0.51 (13.0) 0.86 (21.8) 3.50 (8.89) 5.25 (13.3) 400 (204) 750 (51.6) 3000 (206) 0.15 (0.22)
(–53 to 230)
3/4 (19.0) 0.75 (19.0) 1.12 (28.4) 4.50 (11.4) 5.85 (14.9) — 375 (25.8) 1500 (103) 0.19 (0.28)
INSTRUMENT
MANIFOLD
SYSTEMS
MODULAR
SYSTEMD
Nominal Hose Size, in. 3/8 1/2 3/4

–65 (–53) 1250 (86.1) 720 (49.6) 375 (25.8)
0 (–17) to 100 (37) 1250 (86.1) 750 (51.6) 375 (25.8)
REGULATORS
200 (93) 500 (34.4) 340 (23.4) 275 (18.9)

& FILTERS
300 (148) 365 (25.1) 235 (16.1) 165 (11.3)

400 (204) 165 (11.3) 160 (11.0) 85.0 (5.8)
450 (230) 140 (9.6) 130 (8.9) 80.0 (5.5)
MEASUREMENT
DEVICES
MEDIUM- HIGH-
PRESSURE
REFERENCES
N Series PTFE Hose
FITTINGS
TUBE
Every Swagelok N series hose assembly is pressure Every Swagelok N series hose
requirement of no detectable leakage. Testing is performed at with Swagelok Standard Cleaning and
PIPE, WELD,
VCR, VCO
FITTINGS
500 psig (34.4 bar), or 225 psig (15.5 bar) if an end connection Packaging (SC‑10) catalog, MS‑06‑62.
is rated below 500 psig (34.4 bar).
STANDARD
TUBING
FLEXIBLE
TUBING
HOSE /
BALL & PLUG
VALVES
1 2 3 4 4 5 6 5 6 7
DIAPHRAGM
BELLOWS,
VALVES
SS - NC 8 TA8 KC16 - 28 - MB or 71CM - MB
in. cm
CHECK & RELIEF

1 Material 6 Options 7 Two Elbow Orientation
VALVES
End Connections For multiple options, add designators Only include a value in the assembly
SS = 316 stainless steel with a dash between each designator. number when both end connections are
HC = Alloy C-276 elbows. See page 77 for values and
A = Armor guard
further information.
METERING
NEEDLE &
VALVES
2 Hose
NC =N series helical convoluted F = Fire jacket
-bore, carbon black-filled PTFE G6 = Spiral guard, black
hose with ceramic wrap G7 = Spiral guard, blue
INSTRUMENT
MANIFOLD
SYSTEMS
6 = 3/8
8 = 1/2 Splices
12 = 3/4 SP1 = 1 splice
SP2 = 2 splices
MODULAR
SYSTEMD
4 End Connections Mat Tags
See End Connection Designator MA = Gray MO = Orange
column in tables on pages 74 to 83. MB = Blue MP = Purple
MC = Brown MR = Red
5 Overall Length
REGULATORS
Inches or centimeters, in whole MK = Black MY = Yellow & FILTERS
numbers. Include CM as shown for MN = Pink
centimeter lengths. Add 2 to the end of the Mat Tag
MEASUREMENT
Example: MA2
DEVICES
length:
■ 900 in. or 2286 cm for 3/8 and 1/2 in.
Other Tags
T = Lanyard tag
hose
■ 600 in. or 1524 cm for 3/4 in. hose.
MEDIUM- HIGH-

PRESSURE
Longer assemblies may be spliced; Text table, page 109.

specify splices under Options. See
page 4 for more information about See page 108 for detailed descriptions
splices. of options.
REFERENCES
W Series PTFE Hose

FITTINGS
TUBE
Features
■ Silicone covered PTFE hose. ■ PTFE material complies with FDA regulation 21CFR Part
■ Smooth-bore, carbon black-filled PTFE core for applications 177.1550, USP <88> Class VI, 3-A (for hose size 3/4 in.), and
is free of TSE, BSE, and ADI as defined in EMEA/410/01.
PIPE, WELD,
that require static dissipation.

VCR, VCO
FITTINGS
■ 3/8, 1/2, and 3/4 in. sizes and working pressures up to ■ Commonly used where flexibility, chemical compatibility,
750 psig (51.6 bar). and exterior insulating (hot/cold) cover are desired.
process supports core to reduce kinking. ■ Options include hose covers, hose tags, and additional
STANDARD
TUBING
■ 304 stainless steel braid ensures hose pressure cleaning. See page 108 for details.
containment and protects the core from abrasion. ■ For electrical properties, see page 5 for details.
to-clean surface and insulation from internal system fluid
FLEXIBLE
TUBING
HOSE /
temperature extremes; cover is available in black, blue, red,

and white.
Silicone Ceramic wrap Carbon black-filled PTFE core 316 SS

BALL & PLUG
cover end connections

VALVES
DIAPHRAGM
BELLOWS,
VALVES
CHECK & RELIEF
304 SS braid Fiber braid 300 series SS collar

VALVES
Technical Data
METERING
NEEDLE &
VALVES
Vacuum Minimum
Bend Radius
in. (cm)
INSTRUMENT
MANIFOLD
SYSTEMS
3/8 (9.6) 0.35 (8.9) 0.75 (19.0) 2.75 (6.98) 4.40 (11.2) 400 (204) 750 (51.6) 3000 (206) 0.29 (0.43)
–65 to 400
1/2 (12.7) 0.50 (12.7) 0.92 (23.4) 4.25 (10.8) 6.38 (16.2) 200 (93) 750 (51.6) 3000 (206) 0.35 (0.52)
(–53 to 204)
3/4 (19.0) 0.75 (19.0) 1.19 (30.2) 6.75 (17.1) 8.00 (20.3) — 500 (34.4) 2000 (137) 0.50 (0.74)
MODULAR
SYSTEMD
REGULATORS
Nominal Hose Size, in. 3/8, 1/2 3/4

& FILTERS

–65 (–53) to 400 (204) 750 (51.6) 500 (34.4)
MEASUREMENT
DEVICES
MEDIUM- HIGH-
PRESSURE
REFERENCES
W Series PTFE Hose
FITTINGS
TUBE
Every Swagelok W series hose Testing is performed at 500 psig Every Swagelok W series hose
assembly is pressure tested with water (34.4 bar), or 225 psig (15.5 bar) if an component is cleaned in accordance
at room temperature for 30 seconds to end connection is rated below 500 psig with Swagelok Standard Cleaning and
PIPE, WELD,
VCR, VCO
FITTINGS
a requirement of no detectable leakage. (34.4 bar). Packaging (SC‑10) catalog, MS‑06‑62.
STANDARD
TUBING
FLEXIBLE
TUBING
HOSE /
BALL & PLUG
VALVES
1 2 3 4 4 5 6 7 5 6 7 8
SS - WC 8 TA8 KC16 - 28-BL-PG 71CM-BL PG
DIAPHRAGM
BELLOWS,
or
VALVES
in. cm
CHECK & RELIEF

End Connections For multiple options, add designators Perma Tags
VALVES
SS = 316 stainless steel with a dash between each designator. PA = Gray PO = Orange
HC = Alloy C-276 A = Armor guard PB = Blue PP = Purple
C=A STM G93 Level C cleaning on PC = Brown PR = Red
2 Hose PG = Green PW = White
METERING
NEEDLE &
VALVES
WC =W series carbon black-filled F = Fire jacket PK = Black PY = Yellow
PTFE hose with silicone-cover G6 = Spiral guard, black PN = Pink
and ceramic wrap G7 = Spiral guard, blue Add 2 to the end of the Perma Tag
G8 = Spiral guard, yellow designator for two tags.
Example: PA2
INSTRUMENT
MANIFOLD
SYSTEMS
6 = 3/8
Splices Other Tags
8 = 1/2
SP1 = 1 splice T = Lanyard tag
12 = 3/4
SP2 = 2 splices T2 = Two lanyard tags
4 End Connections Mat Tags Specify text for tags. see Hose Tag
MODULAR
SYSTEMD
See End Connection Designator MA = Gray MO = Orange Text table, page 109.
column in tables on pages 74 to 83. MB = Blue MP = Purple
MC = Brown MR = Red
5 Overall Length of options.
Inches or centimeters, in whole MK = Black MY = Yellow
REGULATORS
& FILTERS
numbers. Include CM as shown for MN = Pink
centimeter lengths. Add 2 to the end of the Mat Tag Only include a value in the assembly
designator for two tags. number when both end connections are
Typical maximum one-piece hose length elbows. See page 77 for values and
is 300 in. or 762 cm. Longer assemblies Example: MA2
MEASUREMENT
further information.
DEVICES
may be spliced; specify splices under

Options. See page 4 for more
information about splices.
6 Silicone Cover Color

MEDIUM- HIGH-
PRESSURE
BK = Black
BL = Blue
RD = Red
WH = White
REFERENCES
3/4 in. available with blue and red only.

F Series PTFE Hose

FITTINGS
TUBE
Features
■ Nonmetallic PTFE hose. ■ Optional carbon black-filled PTFE core is available for
■ Smooth-bore PTFE core. applications that require static dissipation.
PIPE, WELD,
■ Commonly used where flexibility, chemical compatibility,

VCR, VCO
FITTINGS
■ Size range of 1/4 through 3/4 in. and working pressures up

to 800 psig (55.1 bar). and a nonconductive braid are desired.
process supports core to resist kinking. ■ Options include hose covers, hose tags, and additional
STANDARD

TUBING
177.1550, USP <88> Class VI, and is free of TSE, BSE, and ■ For electrical properties, see page 5 for details.
ADI as defined in EMEA/410/01.
Fiber braid PTFE core 300 series SS collar 316 SS

FLEXIBLE
TUBING
HOSE /
end connections
BALL & PLUG
VALVES
DIAPHRAGM
BELLOWS,
VALVES
Technical Data
Minimum Inside Minimum
Bend Radius Working Burst Bulk
CHECK & RELIEF
Nominal Inside Outside in. (cm) Temperature Pressure at Pressure at Hose

VALVES
Hose Size Diameter Diameter Range 70°F (20°C) 70°F (20°C) Weight
1/4 (6.4) 0.25 (6.4) 0.41 (10.4) 2.75 (6.99) 5.50 (14.0) 800 (55.1) 3200 (220) 0.06 (0.09)
3/8 (9.6) 0.38 (9.6) 0.55 (14.0) 3.25 (8.26) 5.20 (13.2) –65 to 450 650 (44.7) 2600 (179) 0.09 (0.13)
1/2 (12.7) 0.50 (12.7) 0.70 (17.8) 5.25 (13.3) 7.88 (20.0) (–53 to 230) 450 (31.0) 1800 (124) 0.13 (0.19)
METERING
NEEDLE &
VALVES
3/4 (19.0) 0.75 (19.0) 0.94 (23.9) 6.50 (16.5) 8.45 (21.5) 325 (22.3) 1300 (89.5) 0.18 (0.27)
INSTRUMENT
MANIFOLD
SYSTEMS
Nominal Hose Size, in. 1/4 3/8 1/2 3/4
MODULAR
SYSTEMD
–65 (–53) 455 (31.3) 480 (33.0) 450 (31.0) 325 (22.3)
0 (–17) to 100 (37) 800 (55.1) 650 (44.7) 450 (31.0) 325 (22.3)
200 (93) 700 (48.2) 490 (33.7) 450 (31.0) 185 (12.7)
300 (148) 330 (22.7) 490 (33.7) 315 (21.7) 175 (12.0)
REGULATORS
400 (204) 160 (11.0) 170 (11.7) 310 (21.3) 175 (12.0)
& FILTERS
450 (230) 160 (11.0) 170 (11.7) 295 (20.3) 160 (11.0)
MEASUREMENT
DEVICES
MEDIUM- HIGH-
PRESSURE
REFERENCES
F Series PTFE Hose
FITTINGS
TUBE
Every Swagelok F series hose assembly is pressure Every Swagelok F series hose
requirement of no detectable leakage. Testing is performed with Swagelok Standard Cleaning and
PIPE, WELD,
VCR, VCO
FITTINGS
at 500 psig (34.4 bar), or 225 psig (15.5 bar) if an end Packaging (SC‑10) catalog, MS‑06‑62.
connection is rated below 500 psig (34.4 bar).
STANDARD
TUBING
FLEXIBLE
TUBING
HOSE /
BALL & PLUG
VALVES
1 2 3 4 4 5 6 5 6 7
DIAPHRAGM
BELLOWS,
VALVES
SS - FT 8 TA8 KC16 - 28 - MB or 71CM - MB
in. cm
CHECK & RELIEF

VALVES
1 Material 6 Options 7 Two Elbow Orientation
End Connections For multiple options, add designators Only include a value in the assembly
SS = 316 stainless steel with a dash between each designator. number when both end connections
HC = Alloy C-276 are elbows. See page 77 for values
A = Armor guard
and further information.
METERING
NEEDLE &
VALVES
2 Hose
FT = F series PTFE hose F = Fire jacket
FC =F series carbon black-filled G6 = Spiral guard, black
PTFE hose G7 = Spiral guard, blue
INSTRUMENT
MANIFOLD
SYSTEMS
3 Nominal Hose Size, in. G8 = Spiral guard, yellow
4 = 1/4 W = Hydrostatic test
6 = 3/8 Splices
8 = 1/2 SP1 = 1 splice
12 = 3/4 SP2 = 2 splices
MODULAR
SYSTEMD
Mat Tags
See End Connection Designator
MC = Brown MR = Red
column in tables on pages 74 to 83.
REGULATORS
MK = Black MY = Yellow & FILTERS
5 Overall Length
MN = Pink
Inches or centimeters, in whole Add 2 to the end of the Mat Tag
numbers. Include CM as shown for designator for two tags.
MEASUREMENT
centimeter lengths. Example: MA2

DEVICES
Typical maximum one-piece hose Other Tags

length: T = Lanyard tag
■ 900 in. or 2286 cm for 1/4 through T2 = Two lanyard tags
MEDIUM- HIGH-
1/2 in. hose Specify text for tags. see Hose Tag

PRESSURE
■ 600 in. or 1524 cm for 3/4 in. hose. Text table, page 109.

Longer assemblies may be spliced; See page 108 for detailed descriptions
specify splices under Options. See of options.
page 4 for more information about
REFERENCES
splices.
U Series PFA Hose

FITTINGS
TUBE
Features
■ Highly flexible PFA hose. ■ PFA material complies with FDA regulation 21CFR Part
■ Smooth-bore PFA core. 177.1550, USP <87, 88> Class VI (121°C), 3-A (for hose
PIPE, WELD,
sizes 3/4 through 2 in.), and is free of TSE, BSE, and ADI as
VCR, VCO
FITTINGS

300 psig (20.6 bar). defined in EMEA/410/01.
■ Optional carbon black-filled PFA core is available for
■ 302 stainless steel reinforcement ensures hose pressure
containment and supports core to resist kinking.
■ Commonly used where high flexibility, chemical
STANDARD
■ Silicone cover provides a smooth, noncontaminating,

TUBING
compatibility, and a smooth exterior cover are desired.

easy-to-clean surface and reduces internal system fluid
temperature transfer. ■ Custom hose lengths and end connections available.
■ Hose layers are encapsulated together without adhesives ■ Options include hose covers, hose tags, and additional
or cements with a patent-pending process, providing high cleaning. See page 108 for details.
FLEXIBLE
TUBING
HOSE /
flexibility and outstanding kink resistance. ■ For electrical properties, see page 5 for details.
Silicone cover 302 SS braid PFA core 300 series SS collar 316 SS
BALL & PLUG
VALVES
end connections
DIAPHRAGM
BELLOWS,
VALVES
CHECK & RELIEF
VALVES
Technical Data
Vacuum Minimum
Minimum Inside (28.5 in.Hg Working Burst
Bend Radius
Nominal Inside Outside Temperature [96.5 kPa]) Pressure at Pressure at Bulk
METERING
NEEDLE &
VALVES
in. (cm)
Hose Size Diameter Diameter Range Rated to ... 70°F (20°C) 70°F (20°C) Hose Weight
1/2 (12.7) 0.50 (12.7) 0.81 (20.6) 1.50 (3.81) 4.50 (11.4) 400 (204) 300 (20.6) 1200 (82.6) 0.20 (0.30)
3/4 (19.0) 0.75 (19.0) 1.13 (28.7) 2.50 (6.35) 5.20 (13.2) 400 (204) 300 (20.6) 1200 (82.6) 0.38 (0.57)
INSTRUMENT
–65 to 400
MANIFOLD
SYSTEMS
1 (25.4) 1.00 (25.4) 1.48 (37.6) 4.00 (10.2) 6.50 (16.5) 250 (121) 250 (17.2) 1000 (68.9) 0.63 (0.94)
(–53 to 204)
1 1/2 (38.1) 1.50 (38.1) 2.00 (50.8) 7.00 (17.8) 9.10 (23.1) 250 (121) 200 (13.7) 800 (55.1) 0.88 (1.3)
2 (50.8) 2.00 (50.8) 2.50 (63.5) 7.00 (17.8) 9.10 (23.1) 150 (65) 150 (10.3) 600 (41.3) 1.3 (1.9)
MODULAR
SYSTEMD
Nominal Hose Size, in. 1/2 3/4 1 1 1/2 2
REGULATORS
& FILTERS

–65 (–53) 200 (13.7) 115 (7.9) 250 (17.2) 200 (13.7) 150 (10.3)
0 (–17) to 100 (37) 300 (20.6) 300 (20.6) 250 (17.2) 200 (13.7) 150 (10.3)
200 (93) 280 (19.2) 300 (20.6) 250 (17.2) 200 (13.7) 150 (10.3)
300 (148) 210 (14.4) 270 (18.6) 230 (15.8) 200 (13.7) 150 (10.3)
MEASUREMENT
400 (204) 160 (11.0) 195 (13.4) 175 (12.0) 200 (13.7) 150 (10.3)
DEVICES
MEDIUM- HIGH-
PRESSURE
REFERENCES
U Series PFA Hose
FITTINGS
TUBE
Every Swagelok U series hose assembly is pressure Every Swagelok U series hose
requirement of no detectable leakage. Testing is performed at with Swagelok Standard Cleaning and
PIPE, WELD,
VCR, VCO
FITTINGS
225 psig (15.5 bar). Packaging (SC‑10) catalog, MS‑06‑62.
STANDARD
TUBING
FLEXIBLE
TUBING
HOSE /
BALL & PLUG

VALVES
1 2 3 4 4 5 6 5 6 7
SS - UT 8 TA8 KC16 - 28 - PB or 71CM - PB
in. cm
DIAPHRAGM
BELLOWS,
VALVES
End Connections For multiple options, add designators Other Tags
SS = 316 stainless steel with a dash between each designator. T = Lanyard tag
CHECK & RELIEF

HC = Alloy C-276 T2 = Two lanyard tags
A = Armor guard
VALVES
C=A STM G93 Level C cleaning on Specify text for tags. See Hose Tag
2 Hose hose wetted surfaces Text table, page 109.
UT =U series PFA hose with silicone F = Fire jacket See page 108 for detailed descriptions
cover G6 = Spiral guard, black of options.
METERING
NEEDLE &
VALVES
UC =U series carbon black-filled PFA G7 = Spiral guard, blue
hose with silicone cover G8 = Spiral guard, yellow 7 Two Elbow Orientation
3 Nominal Hose Size, in. W = Hydrostatic test Only include a value in the assembly
8 = 1/2 Splices number when both end connections are
INSTRUMENT
SP1 = 1 splice elbows. See page 77 for values and
MANIFOLD
SYSTEMS
12 = 3/4
16 = 1 SP2 = 2 splices further information.
24 = 1 1/2 Mat Tags
32 = 2 MA = Gray MO = Orange
4 End Connections
MODULAR
SYSTEMD
MC = Brown MR = Red
See End Connection Designator MG = Green MW = White
column in tables on pages 74 to 83. MK = Black MY = Yellow
MN = Pink
5 Overall Length Add 2 to the end of the Mat Tag
REGULATORS
& FILTERS
Inches or centimeters, in whole designator for two tags.
numbers. Include CM as shown for Example: MA2
centimeter lengths. Perma Tags
MEASUREMENT
PB = Blue PP = Purple
DEVICES
length:
PC = Brown PR = Red
■ 900 in. or 2286 cm for 1/2 in. hose PG = Green PW = White
■ 600 in. or 1524 cm for 3/4 and 1 in. PK = Black PY = Yellow
hose PN = Pink
MEDIUM- HIGH-
Add 2 to the end of the Perma Tag

PRESSURE
■ 300 in. or 762 cm for 1 1/2 and 2 in.

hose. designator for two tags.
Example: PA2
specify splices under Options. See
REFERENCES
page 4 for more information about

splices.
End Connections for B, X, S, C, J, N, W, F and U Series Hose

FITTINGS
TUBE
End Connections
Swagelok Tube
Dimensions
Adapters
PIPE, WELD,
Tube Nominal End Minimum Maximum Pressure

VCR, VCO
FITTINGS
Adapter Hose Size Connection A Inside Outside Rating

Size Designator Designator Max Diameter Dimension psig (bar)
A 1/8 2 TA2 1.86 (47.2) 0.070 (1.7) 0.55 (14.0)
STANDARD
1/4 4 TA4 1.96 (49.8) 0.16 (4.0) 0.59 (15.0)

TUBING
1 in. / 25 mm and Under

3/8 6 TA6 2.42 (61.5) 0.26 (6.6) 0.82 (20.8)
1/2 8 TA8 2.91 (73.9) 0.34 (8.6) 1.04 (26.4) Determined
3/4 12 TA12 3.53 (89.7) 0.54 (13.7) 1.35 (34.3) by hose
1 16 TA16 3.78 (96.0) 0.78 (19.8) 1.75 (44.5)
FLEXIBLE
TUBING
HOSE /
1 1/2➀ 24 TA24 5.22 (133) 1.24 (31.4) 2.60 (66.0)

2➀ 32 TA32 6.82 (173) 1.68 (42.6) 3.46 (87.9)
A
3 2 TM3 47.8 (1.88) 1.7 (0.070) 14.0 (0.55)
BALL & PLUG
VALVES
Over 1 in. / 25 mm 6 4 TM6 50.3 (1.98) 4.0 (0.16) 15.0 (0.59)

10 6 TM10 62.0 (2.44) 6.6 (0.26) 20.8 (0.82)
12 8 TM12 74.4 (2.93) 8.6 (0.34) 23.1 (0.91) Determined
18 12 TM18 90.2 (3.55) 13.7 (0.54) 34.3 (1.35) by hose
DIAPHRAGM
25 16 TM25 96.5 (3.80) 19.8 (0.78) 44.5 (1.75)

BELLOWS,
VALVES
38➀ 24 TM38 133 (5.24) 31.4 (1.24) 69.3 (2.73)

50➀ 32 TM50 173 (6.81) 42.6 (1.68) 87.9 (3.46)
Alloy C-276 ends available for 1 in. and under tube adapters.
CHECK & RELIEF
➀ Furnished with nut and preswaged ferrules.

VALVES

Dimensions
Fitting Hose Size Connection A Inside Outside Rating
METERING
NEEDLE &
VALVES
Size Designator Designator Max Diameter Dimension psig (bar)

A
1/8 2 SL2 1.88 (47.8) 0.070 (1.7) 0.55 (14.0)
1/4 4 SL4 2.02 (51.3) 0.16 (4.0) 0.59 (15.0)
INSTRUMENT
MANIFOLD
SYSTEMS
3/8 6 SL6 2.48 (63.0) 0.26 (6.6) 0.82 (20.8)

1/2 8 SL8 2.81 (71.4) 0.34 (8.6) 1.04 (26.4) Determined
3/4 12 SL12 3.44 (87.4) 0.54 (13.7) 1.35 (34.3) by hose
1 16 SL16 3.61 (91.7) 0.78 (19.8) 1.75 (44.5)
1 1/2 24 SL24 5.12 (130) 1.24 (31.4) 2.60 (66.0)
MODULAR
SYSTEMD
2 32 SL32 6.72 (171) 1.68 (42.6) 3.46 (87.9)

3 2 SM3 48.5 (1.91) 1.7 (0.070) 14.0 (0.55)
6 4 SM6 51.3 (2.02) 4.0 (0.16) 16.3 (0.64)
REGULATORS
& FILTERS
10 6 SM10 64.5 (2.54) 6.6 (0.26) 20.8 (0.82)

12 8 SM12 71.9 (2.83) 8.6 (0.34) 26.4 (1.04) Determined
18 12 SM18 78.0 (3.07) 13.7 (0.54) 34.3 (1.35) by hose
25 16 SM25 91.7 (3.61) 19.8 (0.78) 44.5 (1.75)
MEASUREMENT
38 24 SM38 133 (5.24) 31.4 (1.24) 69.3 (2.73)

DEVICES
50 32 SM50 169 (6.65) 42.6 (1.68) 87.9 (3.46)

Alloy C-276 ends available for 1 in. and under tube fittings.
MEDIUM- HIGH-
PRESSURE
REFERENCES
FITTINGS
TUBE
NPT
NPT Nominal End Minimum Maximum Pressure
Size Hose Size Connection A Inside Outside Rating
in. Designator Designator Max Diameter Dimension psig (bar)
PIPE, WELD,
VCR, VCO
FITTINGS
1/8 2 PF2 1.76 (44.7) 0.070 (1.7) 0.65 (16.5)
1/4 4 PF4 1.85 (47.0) 0.16 (4.0) 0.87 (22.1)
A 3/8 6 PF6 2.31 (58.7) 0.26 (6.6) 1.01 (25.7)
1/2 8 PF8 2.66 (67.6) 0.34 (8.6) 1.30 (33.0) Determined
STANDARD
by hose➀
TUBING
3/4 12 PF12 3.32 (84.3) 0.54 (13.7) 1.52 (38.6)
1 16 PF16 3.44 (87.4) 0.78 (19.8) 1.88 (47.8)
1 1/2 24 PF24 4.19 (106) 1.24 (31.4) 2.75 (69.9)
2 32 PF32 4.88 (124) 1.68 (42.6) 3.18 (80.8)
FLEXIBLE
➀ Brass PF4 pressure rating is 3300 psig (228 bar).
TUBING
HOSE /
Female Pipe Threads, NPT
NPT, with JIC (AN) 37˚ with JIC Dimensions, in. (mm)
Union Union Nominal End Minimum Maximum Pressure
BALL & PLUG

VALVES
1/8 2 FU2 2.38 (60.5) 0.070 (1.7) 0.65 (16.5)
1/4 4 FU4 2.61 (66.3) 0.16 (4.0) 0.87 (22.1)
3/8 6 FU6 3.07 (78.0) 0.26 (6.6) 1.01 (25.7)
DIAPHRAGM
BELLOWS,
A
VALVES
1/2 8 FU8 3.59 (91.2) 0.34 (8.6) 1.23 (31.2) Determined
3/4 12 FU12 4.47 (114) 0.54 (13.7) 1.52 (38.6) by hose
1 16 FU16 4.77 (121) 0.78 (19.8) 2.02 (51.3)
1 1/2 24 FU24 6.12 (155) 1.24 (31.4) 2.75 (69.9)
CHECK & RELIEF

VALVES
2 32 FU32 7.05 (179) 1.68 (42.6) 3.46 (87.9)
Male Pipe Threads,

NPT
METERING
NEEDLE &
VALVES
NPT Nominal End Minimum Maximum Pressure
1/8 2 PM2 1.70 (43.2) 0.077 (1.9) 0.55 (14.0)
1/4 4 PM4 1.91 (48.5) 0.16 (4.0) 0.65 (16.5)
INSTRUMENT
A
MANIFOLD
SYSTEMS
3/8 6 PM6 2.31 (58.7) 0.28 (7.1) 0.82 (20.8)
1/2 8 PM8 2.72 (69.1) 0.37 (9.4) 1.04 (26.4) Determined
3/4 12 PM12 3.26 (82.8) 0.63 (16.0) 1.35 (34.3) by hose
1 16 PM16 3.45 (87.6) 0.78 (19.8) 1.75 (44.5)
MODULAR
SYSTEMD
1 1/2 24 PM24 4.24 (108) 1.36 (34.5) 2.31 (58.7)
2 32 PM32 5.12 (130) 1.84 (46.7) 2.89 (73.4)
REGULATORS
Male Pipe Threads,
& FILTERS
NPT
NPT, with JIC (AN) 37˚ with JIC Dimensions, in. (mm)
Union Union Nominal End Minimum Maximum Pressure
MEASUREMENT
1/8 2 MU2 2.37 (60.2) 0.070 (1.7) 0.55 (14.0)

DEVICES
1/4 4 MU4 2.70 (68.6) 0.16 (4.0) 0.65 (16.5)

A
3/8 6 MU6 3.19 (81.0) 0.26 (6.6) 0.82 (20.8)
1/2 8 MU8 3.71 (94.2) 0.34 (8.6) 1.04 (26.4) Determined
by hose
MEDIUM- HIGH-
3/4 12 MU12 4.52 (115) 0.54 (13.7) 1.45 (36.8)

PRESSURE
1 16 MU16 4.75 (121) 0.78 (19.8) 1.75 (44.5)

1 1/2 24 MU24 5.88 (149) 1.24 (31.4) 2.60 (66.0)
2 32 MU32 7.08 (180) 1.68 (42.6) 3.32 (84.3)
REFERENCES

FITTINGS
TUBE
Sanitary Kwik-Clamps➀
Kwik- End Connection Dimensions, in. (mm)
Clamp Nominal Designator Minimum B, Flange C, Flange Pressure
C Size Hose Size Standard Electro- A Inside Outside Face Inside Rating
B in. Designator Surface polished Max Diameter Diameter Diameter psig (bar)
PIPE, WELD,
VCR, VCO
FITTINGS
4 KC8 KE8 1.60 (40.6) 0.16 (4.0)

A 1/2 6 KC8 KE8 2.23 (56.6) 0.26 (6.6) 0.98 (25.0) 0.37 (9.4) 1500 (103)
8 KC8 KE8 2.61 (66.3) 0.34 (8.6)
➀ 316L SS material with an I.D.
of 15 µin. (0.38 µm) Ra max 6 KC12 KE12 2.23 (56.6) 0.26 (6.6)
STANDARD
TUBING
surface finish applies prior to 3/4 8 KC12 KE12 2.48 (63.0) 0.34 (8.6) 0.98 (25.0) 0.62 (15.7) 1500 (103)
crimp.
12 KC12 KE12 2.85 (72.4) 0.54 (13.7)
8 KC16 KE16 2.44 (62.0) 0.34 (8.6)
1 12 KC16 KE16 2.70 (68.6) 0.54 (13.7) 1.98 (50.3) 0.87 (22.1) 500 (34.4)
16 KC16 KE16 2.76 (70.1) 0.78 (19.8)
FLEXIBLE
TUBING
HOSE /
8 KC24 KE24 2.45 (62.2) 0.34 (8.6)

12 KC24 KE24 2.70 (68.6) 0.54 (13.7)
1 1/2 1.98 (50.3) 1.37 (34.8) 500 (34.4)
16 KC24 KE24 2.60 (66.0) 0.78 (19.8)
24 KC24 KE24 3.31 (84.1) 1.24 (31.4)
BALL & PLUG
VALVES
16 KC32 KE32 2.60 (66.0) 0.78 (19.8)

2 24 KC32 KE32 3.21 (81.5) 1.24 (31.4) 2.52 (64.0) 1.87 (47.5) 450 (31.0)
32 KC32 KE32 3.98 (101) 1.68 (42.6)
24 KC40 KE40 3.32 (84.3) 1.24 (31.4)
2 1/2 3.05 (77.5) 2.37 (60.2) 400 (27.5)
DIAPHRAGM
BELLOWS,
32 KC40 KE40 3.97 (101) 1.68 (42.6)

VALVES
Sanitary Kwik-Clamp
End Connection Dimensions, in. (mm)
CHECK & RELIEF
90° Elbows Kwik-

Designator
Clamp Nominal Minimum C, Flange D, Flange Pressure
VALVES
C
D
Size Hose Size Standard Electro- A Inside Outside Face Inside Rating
in. Designator Surface polished Max B Diameter Diameter Diameter psig (bar)
1/2 8 KR8 RE8 2.92 (74.2) 1.27 (32.3) 0.34 (8.6) 0.98 (25.0) 0.37 (9.4) 1500 (103)
B
3/4 12 KR12 RE12 3.45 (87.6) 1.63 (41.4) 0.54 (13.7) 0.98 (25.0) 0.62 (15.7) 1500 (103)
METERING
NEEDLE &
VALVES
1 16 KR16 RE16 4.10 (104) 2.02 (51.3) 0.78 (19.8) 1.98 (50.3) 0.87 (22.1) 500 (34.4)
A 1 1/2 24 KR24 RE24 5.90 (150) 2.77 (70.4) 1.24 (31.4) 1.98 (50.3) 1.37 (34.8) 500 (34.4)
2 32 KR32 RE32 7.56 (192) 3.51 (89.2) 1.68 (42.6) 2.52 (64.0) 1.87 (47.5) 450 (31.0)
INSTRUMENT
MANIFOLD
SYSTEMS
MODULAR
SYSTEMD
REGULATORS
& FILTERS
MEASUREMENT
DEVICES
MEDIUM- HIGH-
PRESSURE
REFERENCES
FITTINGS
TUBE
Sanitary Kwik-Clamp
End Connection Dimensions, in. (mm)
45° Elbows Kwik-
Designator
Clamp Nominal Minimum C, Flange D, Flange Pressure
Size Hose Size Standard Electro- A Inside Outside Face Inside Rating
C in. Designator Surface polished Max B Diameter Diameter Diameter psig (bar)
PIPE, WELD,
D
VCR, VCO
FITTINGS
1/2 8 KA8 AE8 3.05 (77.5) 0.70 (17.8) 0.34 (8.6) 0.98 (25.0) 0.37 (9.4) 1500 (103)
3/4 12 KA12 AE12 3.85 (97.8) 0.69 (17.6) 0.54 (13.7) 0.98 (25.0) 0.62 (15.7) 1500 (103)
B 1 16 KA16 AE16 4.02 (102) 0.81 (20.5) 0.78 (19.8) 1.98 (50.3) 0.87 (22.1) 500 (34.4)
A
1 1/2 24 KA24 AE24 5.60 (142) 1.03 (26.2) 1.24 (31.4) 1.98 (50.3) 1.37 (34.8) 500 (34.4)
STANDARD
TUBING
2 32 KA32 AE32 7.03 (179) 1.27 (32.3) 1.68 (42.6) 2.52 (64.0) 1.87 (47.5) 450 (31.0)
Two Elbow Hose Options
FLEXIBLE
TUBING
HOSE /
For hoses with two elbow end connections, a suffix is needed to indicate the angle offset between the first end connection and
the second end connection. The first end connection is indicated by the first end connection designator in the part number. The
second end connection is indicated by the second end connection designator in the part number. See the table and diagram
below for the part number suffix and its corresponding angle offset.
BALL & PLUG

VALVES
Second end
connection
designator
-0
DIAPHRAGM
BELLOWS,
VALVES
Part Number Rotation
-7 -1
Suffix Amount 0º
-0 0° 315º
45º
-1 45°
CHECK & RELIEF

VALVES
-2 90°
-3 135° First end -6 270º -2
connection
90º
-4 180°
designator
-5 225°
METERING
NEEDLE &
VALVES
-6 270°
225º 135º
-7 315°
-5 180º -3
INSTRUMENT
MANIFOLD
SYSTEMS
-4
MODULAR
SYSTEMD
elbow end connection 2a
REGULATORS
& FILTERS
MEASUREMENT
DEVICES
MEDIUM- HIGH-
PRESSURE
REFERENCES

FITTINGS
TUBE
Tube Butt Welds➀ Tube

Butt Dimensions, in. (mm)
Weld Wall Nominal End Minimum Maximum Pressure
Size Thickness Hose Size Connection A Inside Outside Rating
PIPE, WELD,
in. in. Designator Designator Max Diameter Dimension psig (bar)

VCR, VCO
FITTINGS
A
1/2 0.049 8 TB8 2.70 (68.6) 0.34 (8.6) 1.04 (26.4)
➀ 316 SS material with an I.D. 3/4 0.049 12 TB12 3.26 (82.8) 0.54 (13.7) 1.35 (34.3)
of 15 µin. (0.38 µm) Ra max Determined
1 0.065 16 TB16 3.26 (82.8) 0.78 (19.8) 1.75 (44.5)
surface finish applies prior to by hose
crimp. 1 1/2 0.095 24 TB24 4.65 (118) 1.24 (31.4) 2.20 (55.9)
STANDARD
TUBING
2 0.109 32 TB32 5.56 (141) 1.68 (42.6) 2.75 (69.9)

SAE 37°
FLEXIBLE
Swivel
TUBING
HOSE /
(JIC)
Female Dimensions, in. (mm)
Swivel Nominal End Minimum Maximum Pressure
BALL & PLUG
VALVES
1/8 2 AS2 1.43 (36.3) 0.070 (1.7) 0.55 (14.0)

A
1/4 4 AS4 1.57 (39.8) 0.16 (4.0) 0.66 (16.8)
3/8 6 AS6 1.97 (50.0) 0.26 (6.6) 0.82 (20.8)
1/2 8 AS8 2.28 (57.9) 0.34 (8.6) 1.04 (26.4) Determined
by hose
DIAPHRAGM
3/4 12 AS12 2.92 (74.2) 0.54 (13.7) 1.35 (34.3)

BELLOWS,
VALVES
1 16 AS16 2.93 (74.4) 0.78 (19.8) 1.75 (44.5)

1 1/2 24 AS24 3.72 (94.5) 1.24 (31.4) 2.61 (66.3)
2 32 AS32 4.61 (117) 1.68 (42.6) 3.33 (84.6)
CHECK & RELIEF
VALVES
Female Cam and Groove Female

Cam and Dimensions, in. (mm)
Groove Nominal End Minimum Maximum Pressure
METERING
NEEDLE &
VALVES

3/4 12 GF12 4.03 (102) 0.54 (13.7) 3.27 (83.1)
1 16 GF16 4.53 (115) 0.78 (19.8) 3.50 (88.9)
250 (17.2)
1 1/2 24 GF24 5.39 (137) 1.24 (31.4) 4.44 (113)
INSTRUMENT
A
MANIFOLD
SYSTEMS
2 32 GF32 6.30 (160) 1.68 (42.6) 4.82 (122)

The A dimension may vary if armor guard hose cover is ordered.
Male Cam and Groove

MODULAR
SYSTEMD
Male
Cam and Dimensions, in. (mm)
Groove Nominal End Minimum Maximum Pressure
REGULATORS
A 3/4 12 GM12 2.92 (74.2) 0.54 (13.7) 1.27 (32.3)

& FILTERS
1 16 GM16 3.54 (89.9) 0.78 (19.8) 1.45 (36.8)

250 (17.2)
1 1/2 24 GM24 4.40 (112) 1.24 (31.4) 2.11 (53.6)
2 32 GM32 5.15 (131) 1.68 (42.6) 2.47 (62.7)
MEASUREMENT
DEVICES
MEDIUM- HIGH-
PRESSURE
REFERENCES
FITTINGS
TUBE
Tube Stubs
Dimensions
Stub Wall Hose Size Connection A Inside Outside Rating
Size Thickness Designator Designator Max Diameter Dimension psig (bar)
PIPE, WELD,
VCR, VCO
FITTINGS
1/8 0.028 2 TN2 1.96 (49.8) 0.069 (1.8) 0.31 (7.9)
1/4 0.035 4 TN4 2.24 (56.9) 0.16 (4.1) 0.46 (11.7)
3/8 0.049 6 TN6 2.55 (64.8) 0.26 (6.6) 0.63 (16.0)
STANDARD
TUBING
1/2 0.049 8 TN8 3.08 (78.2) 0.34 (8.6) 0.86 (21.8) Determined
3/4 0.065 12 TN12 3.45 (87.6) 0.54 (13.7) 0.99 (25.1) by hose
1 0.083 16 TN16 3.92 (99.6) 0.78 (19.8) 1.39 (35.3)
1 1/2 0.134 24 TN24 6.08 (154) 1.24 (31.5) 1.96 (49.8)
2 0.188 32 TN32 6.74 (171) 1.68 (42.7) 2.43 (61.7)
FLEXIBLE
TUBING
HOSE /
3 0.80 2 TE3 41.7 (1.64) 1.3 (0.052) 7.9 (0.31)
6 1.0 4 TE6 57.2 (2.25) 4.0 (0.16) 11.7 (0.46)
8 1.0 4 TE8 57.9 (2.28) 4.0 (0.16) 16.0 (0.63)
BALL & PLUG

VALVES
8 1.0 6 TE8 64.3 (2.53) 6.0 (0.24) 16.0 (0.63)
10 1.0 6 TE10 65.0 (2.56) 6.6 (0.26) 16.0 (0.63)
Determined
12 1.0 6 TE12 71.6 (2.82) 6.6 (0.26) 16.0 (0.63)
by hose
12 1.0 8 TE12 77.5 (3.05) 8.7 (0.34) 21.9 (0.86)
DIAPHRAGM
BELLOWS,
18 1.5 12 TE18 87.4 (3.44) 13.8 (0.54) 25.1 (0.99)
VALVES
25 1.5 16 TE25 101 (3.98) 19.7 (0.78) 35.4 (1.39)
38 3.5 24 TE38 133 (5.23) 30.9 (1.22) 50.5 (1.99)
50 5.0 32 TE50 179 (7.03) 39.9 (1.57) 64.8 (2.55)
CHECK & RELIEF

VALVES
Female VCO O-Ring
Face Seal Fittings
VCO Nominal End Minimum Maximum Pressure
METERING
NEEDLE &
VALVES
1/4 4 VF4 1.67 (42.4) 0.16 (4.0) 0.80 (20.3)
1/2 8 VF8 2.18 (55.4) 0.34 (8.6) 1.16 (29.5) Determined
3/4 12 VF12 2.79 (70.9) 0.54 (13.7) 1.74 (44.2) by hose
INSTRUMENT
MANIFOLD
SYSTEMS
A 1 16 VF16 2.67 (67.8) 0.78 (19.8) 2.03 (51.6)
Female VCR Metal Gasket

Face Seal Fittings
MODULAR
SYSTEMD
VCR Nominal End Minimum Maximum Pressure
1/4 4 RF4 1.76 (44.7) 0.16 (4.0) 0.87 (22.1)
1/2 8 RF8 2.37 (60.2) 0.34 (8.6) 1.23 (31.2) Determined
REGULATORS
& FILTERS
3/4 12 RF12 3.08 (78.2) 0.54 (13.7) 1.74 (44.2) by hose
A
1 16 RF16 3.20 (81.3) 0.78 (19.8) 2.03 (51.6) MEASUREMENT
DEVICES
MEDIUM- HIGH-
PRESSURE
REFERENCES

FITTINGS
TUBE
TS Series Sanitary Clamps➀

Sanitary Dimensions, in. (mm)
Clamp Nominal End Minimum B, Flange Maximum Pressure
Size Hose Size Connection A Inside Outside Outside Rating
B in. Designator Designator Max Diameter Diameter Dimension psig (bar)
PIPE, WELD,
VCR, VCO
FITTINGS
1/2 8 TS8 2.20 (55.9) 0.34 (8.6) 0.98 (25.0) 1.04 (26.4) 3100 (213)
A
3/4 12 TS12 2.70 (68.6) 0.54 (13.7) 0.98 (25.0) 1.35 (34.3) 2800 (192)
1 16 TS16 2.88 (73.2) 0.78 (19.8) 1.98 (50.3) 1.98 (50.3) 1200 (82.6)
of 15 µin. (0.38 µm) Ra max 1 1/2 24 TS24 3.35 (85.1) 1.24 (31.4) 1.98 (50.3) 2.20 (55.9) 1200 (82.6)
STANDARD
surface finish applies prior to

TUBING
2 32 TS32 4.01 (102) 1.68 (42.6) 2.52 (64.0) 2.74 (69.6) 650 (44.7)
crimp.
Male Pipe Threads,

Male Pipe
ISO/BSP Tapered (ISO 7)
FLEXIBLE
TUBING
Thread,
HOSE /
ISO/BSP Dimensions, in. (mm)

Tapered Nominal End Minimum Maximum Pressure
BALL & PLUG
1/4 4 MT4 1.91 (48.5) 0.16 (4.0) 0.66 (16.8)

VALVES
A
3/8 6 MT6 2.31 (58.7) 0.26 (6.6) 0.82 (20.8)
1/2 8 MT8 2.72 (69.1) 0.34 (8.6) 1.04 (26.4)
Determined
3/4 12 MT12 3.26 (82.8) 0.54 (13.7) 1.35 (34.3)
by hose
1 16 MT16 3.45 (87.6) 0.78 (19.8) 1.75 (44.5)
DIAPHRAGM
BELLOWS,
VALVES
1 1/2 24 MT24 4.25 (108) 1.24 (31.4) 2.31 (58.7)

2 32 MT32 5.12 (130) 1.68 (42.6) 2.89 (73.4)
CHECK & RELIEF
Male ISO/BSP Parallel

VALVES
ISO/BSP
Threads with 60° Male Parallel,
Cone (ISO 228) 60° Male Dimensions, in. (mm)
Cone Nominal End Minimum Maximum Pressure
METERING
NEEDLE &

VALVES
1/4 4 MS4 1.99 (50.5) 0.16 (4.0) 0.87 (22.1)

A 3/8 6 MS6 2.38 (60.5) 0.26 (6.6) 1.01 (25.7)
1/2 8 MS8 2.65 (67.3) 0.34 (8.6) 1.23 (31.2)
Determined
INSTRUMENT
3/4 12 MS12 3.37 (85.6) 0.54 (13.7) 1.52 (38.6)

MANIFOLD
SYSTEMS
by hose
1 16 MS16 3.38 (85.9) 0.78 (19.8) 1.88 (47.8)
1 1/2 24 MS24 4.21 (107) 1.24 (31.4) 2.53 (64.3)
2 32 MS32 5.16 (131) 1.68 (42.6) 3.18 (80.8)
MODULAR
SYSTEMD

Female
ISO/BSP Tapered (ISO 7) Pipe
Thread,
REGULATORS
ISO/BSP
& FILTERS
Tapered Nominal End Minimum Maximum Pressure

1/4 4 FT4 1.85 (47.0) 0.16 (4.0) 0.87 (22.1)
A
MEASUREMENT
3/8 6 FT6 2.32 (58.9) 0.26 (6.6) 1.01 (25.7)

DEVICES
1/2 8 FT8 2.67 (67.8) 0.34 (8.6) 1.23 (31.2)

Determined
3/4 12 FT12 3.37 (85.6) 0.54 (13.7) 1.52 (38.6)
by hose
1 16 FT16 3.45 (87.6) 0.78 (19.8) 1.88 (47.8)
1 1/2 24 FT24 4.15 (105) 1.24 (31.4) 2.75 (69.9)
MEDIUM- HIGH-
PRESSURE
2 32 FT32 4.99 (127) 1.68 (42.6) 3.32 (84.3)

REFERENCES
FITTINGS
TUBE
Female ISO/BSP Parallel ISO/BSP
Threads (ISO 228) Parallel Dimensions, in. (mm)
Thread Nominal End Minimum Maximum Pressure
PIPE, WELD,
VCR, VCO
FITTINGS
1/4 4 FS4 2.06 (52.3) 0.16 (4.0) 0.87 (22.1)
3/8 6 FS6 2.57 (65.3) 0.26 (6.6) 1.09 (27.7)
A 1/2 8 FS8 2.84 (72.1) 0.34 (8.6) 1.23 (31.2)
Determined
3/4 12 FS12 3.39 (86.1) 0.54 (13.7) 1.59 (40.4)
STANDARD
by hose
TUBING
1 16 FS16 3.46 (87.9) 0.78 (19.8) 1.88 (47.8)
1 1/2 24 FS24 4.29 (109) 1.24 (31.4) 2.60 (66.0)
2 32 FS32 4.95 (126) 1.68 (42.6) 3.18 (80.8)
FLEXIBLE
TUBING
HOSE /
Female Swivel ISO/BSP
Swivel
Parallel Threads with ISO/BSP
30° Cone Parallel
Thread, Dimensions, in. (mm)
BALL & PLUG

VALVES
30° Cone Nominal End Minimum Maximum Pressure
1/4 4 BS4 2.19 (55.6) 0.16 (4.0) 0.87 (22.1)
A Determined
3/8 6 BS6 2.72 (69.1) 0.26 (6.6) 1.01 (25.7)
DIAPHRAGM
by hose
BELLOWS,
VALVES
1/2 8 BS8 3.10 (78.7) 0.34 (8.6) 1.23 (31.2)
CHECK & RELIEF

Swivel
Parallel Threads with
VALVES
ISO/BSP
60° Cone Parallel
Thread, Dimensions, in. (mm)
60° Cone Nominal End Minimum Maximum Pressure
60° Size Hose Size Connection A Inside Outside Rating
METERING
NEEDLE &
VALVES
A 1/4 4 BM4 2.08 (52.8) 0.16 (4.0) 0.87 (22.1)
Determined
3/8 6 BM6 2.59 (65.8) 0.26 (6.6) 1.01 (25.7)
by hose
1/2 8 BM8 2.95 (74.9) 0.34 (8.6) 1.23 (31.2)
INSTRUMENT
MANIFOLD
SYSTEMS
JIS(A)/ISO 2852-Type JIS(A)/ End Connection
Sanitary➀ ISO 2852- Designator Dimensions, in. (mm)
Type Nominal Minimum B, Flange C, Flange Pressure
Sanitary Hose Size Standard Electro- A Inside Outside Face Inside Rating
MODULAR
SYSTEMD
C
Size Designator Surface polished Max Diameter Diameter Diameter psig (bar)
B
8A 6 JS8 JE8 2.16 (54.9) 0.26 (6.6) 0.41 (10.4)
10A 8 JS10 JE10 2.34 (59.4) 0.34 (8.6) 1.34 (34.0) 0.55 (14.0) 500 (34.4)
A
15A 12 JS15 JE15 2.88 (73.2) 0.54 (13.7) 0.69 (17.5)
REGULATORS
& FILTERS
of 15 µin. (0.38 µm) Ra max
crimp.
MEASUREMENT
ISO-KF Vacuum Flange ISO-KF

DEVICES
Vacuum Dimensions, mm (in.)

Flange Nominal End Minimum B, Flange Maximum C, Flange Pressure
B C Size Hose Size Connection A Inside Outside Outside Face Inside Rating
mm Designator Designator Max Diameter Diameter Dimension Diameter bar (psig)
MEDIUM- HIGH-
A 16 12 KF16 71.1 (2.80) 13.7 (0.54) 30.0 (1.18) 34.3 (1.35) 17.3 (0.68)
PRESSURE
25 16 KF25 68.6 (2.70) 19.8 (0.78) 40.0 (1.57) 44.5 (1.75) 26.4 (1.04)
10.0 (145)
40 24 KF40 82.6 (3.25) 31.4 (1.24) 55.0 (2.16) 55.9 (2.20) 41.4 (1.63)
50 32 KF50 106 (4.16) 42.6 (1.68) 75.0 (2.95) 75.2 (2.96) 52.6 (2.07)
REFERENCES

FITTINGS
TUBE
Sanitary DIN 11864-3 Sanitary DIN

Series A, Form A, Clamp 11864-3 Series A, Dimensions, mm (in.)
Ferrule with Groove➀ Form A, Clamp Nominal End Minimum B, Flange Pressure
Ferrule with Hose Size Connection A Inside Outside Rating
PIPE, WELD,
VCR, VCO
FITTINGS
Groove, Size mm Designator Designator Max Diameter Diameter bar (psig)

B 10 6 DB10 51.8 (2.04) 6.6 (0.26) 35.6 (1.40)
8 DB15 56.9 (2.24) 8.6 (0.34) 34.0 (1.34)
15
A 12 DB15 70.4 (2.77) 13.7 (0.54) 34.0 (1.34) 40.0 (580)
20 12 DB20 60.5 (2.38) 13.7 (0.54) 50.3 (1.98)
STANDARD
TUBING
➀ 316L SS material with an I.D. 25 16 DB25 67.3 (2.65) 19.8 (0.78) 50.3 (1.98)
of 15 µin. (0.38 µm) Ra max 40 24 DB40 83.6 (3.29) 31.4 (1.24) 64.0 (2.52)
surface finish applies prior to 24.8 (360)
crimp. 50 32 DB50 101 (3.97) 42.6 (1.68) 77.5 (3.05)
FLEXIBLE
TUBING
HOSE /
Female DIN 11851 Female

with Nut➀ DIN 11851 Dimensions, mm (in.)
with Nut Nominal End Minimum Maximum Pressure
BALL & PLUG

VALVES
mm Designator Designator Max Diameter Dimension bar (psig)

15 8 DF15 57.4 (2.26) 8.6 (0.34) 44.2 (1.74)
20 12 DF20 73.7 (2.90) 13.7 (0.54) 54.4 (2.14)
40.0 (580)
A 25 16 DF25 70.6 (2.78) 19.8 (0.78) 63.2 (2.49)
DIAPHRAGM
BELLOWS,
VALVES
➀ 316L SS material with an I.D. 40 24 DF40 87.6 (3.45) 31.4 (1.24) 78.2 (3.08)
of 15 µin. (0.38 µm) Ra max 50 32 DF50 106 (4.19) 42.6 (1.68) 92.2 (3.63) 24.8 (360)
crimp.
CHECK & RELIEF
ASME Class 150 Lap ASME Class

VALVES
Joint Flange 150 Lap Dimensions, in. (mm)

Joint Flange Nominal End Minimum Maximum Pressure
1/2 8 GA8 2.75 (69.9) 0.34 (8.6) 3.56 (90.4)
METERING
NEEDLE &
VALVES
3/4 12 GA12 3.41 (86.6) 0.54 (13.7) 3.91 (99.3)

1 16 GA16 3.38 (85.9) 0.78 (19.8) 4.28 (109) 275 (18.9)
1 1/2 24 GA24 4.09 (104) 1.24 (31.4) 5.03 (128)
A
2 32 GA32 5.06 (129) 1.68 (42.6) 6.03 (153)
INSTRUMENT
MANIFOLD
SYSTEMS
JIS 10K Lap Joint Flange JIS 10K

Lap Joint Dimensions, mm (in.)
Flange Nominal End Minimum Maximum Pressure
MODULAR
SYSTEMD

15 8 HA15 69.9 (2.75) 8.6 (0.34) 95.3 (3.75)
20 12 HA20 86.6 (3.41) 13.7 (0.54) 100 (3.95)
25 16 HA25 85.9 (3.38) 19.8 (0.78) 125 (4.93) 9.7 (142)
REGULATORS
& FILTERS
A 40 24 HA40 104 (4.09) 31.4 (1.24) 140 (5.52)

50 32 HA50 123 (4.86) 42.6 (1.68) 155 (6.11)
DIN PN10 Lap Joint

MEASUREMENT
DIN PN10
DEVICES
Flange Lap Joint Dimensions, mm (in.)

Flange Nominal End Minimum Maximum Pressure
15 8 FA15 69.9 (2.75) 8.6 (0.34) 95.3 (3.75)
MEDIUM- HIGH-
PRESSURE
20 12 FA20 86.6 (3.41) 13.7 (0.54) 105 (4.14)

25 16 FA25 88.9 (3.50) 19.8 (0.78) 115 (4.54) 10.0 (145)
40 24 FA40 121 (4.76) 31.4 (1.24) 150 (5.92)
A 50 32 FA50 123 (4.86) 42.6 (1.68) 165 (6.51)
REFERENCES
FITTINGS
TUBE
Sanitary I-Line Male➀ Sanitary
I-Line Dimensions, in. (mm)
Male Nominal End Minimum Maximum Pressure
PIPE, WELD,
VCR, VCO
FITTINGS
A 1 16 MD16 2.99 (75.9) 0.78 (19.8) 2.01 (51.1) 1220 (84.0)
1 1/2 24 MD24 3.70 (94.0) 1.24 (31.4) 2.20 (55.9) 1220 (84.0)
➀ 316L SS material with an I.D. 2 32 MD32 4.45 (113) 1.68 (42.6) 2.74 (69.6) 900 (62.0)
STANDARD
TUBING
crimp.
Sanitary I-Line Female➀ Sanitary

I-Line Dimensions, in. (mm)
Female Nominal End Minimum Maximum Pressure
FLEXIBLE
TUBING
HOSE /
A 1 16 FD16 2.98 (75.7) 0.78 (19.8) 2.01 (51.1) 1220 (84.0)
1 1/2 24 FD24 3.69 (93.7) 1.24 (31.4) 2.20 (55.9) 1220 (84.0)
BALL & PLUG

➀ 316L SS material with an I.D. 2 32 FD32 4.44 (113) 1.68 (42.6) 2.74 (69.6) 900 (62.0)
VALVES
crimp.
Sanitary (DIN 32676)➀ Sanitary
DIAPHRAGM
BELLOWS,
VALVES
(DIN
C 32676) Nominal End Minimum B, Flange C, Flange Pressure
B Size Hose Size Connection A Inside Outside Face Inside Rating
mm Designator Designator Max Diameter Diameter Diameter bar (psig)
4 DA10 46.0 (1.81) 4.0 (0.16) 34.0 (1.34)
CHECK & RELIEF

A
10 6 DA10 56.1 (2.21) 6.6 (0.26) 34.0 (1.34) 10.2 (0.40)
VALVES
➀ 316L SS material with an I.D. 8 DA10 56.6 (2.23) 8.6 (0.34) 34.0 (1.34)
of 15 µin. (0.38 µm) Ra max 8 DA15 58.9 (2.32) 8.6 (0.34) 34.0 (1.34)
surface finish applies prior to 15 16.1 (0.63)
crimp. 12 DA15 72.6 (2.86) 13.7 (0.54) 34.0 (1.34)
15.8 (230)
20 12 DA20 72.6 (2.86) 13.7 (0.54) 34.0 (1.34) 20.1 (0.79)
METERING
NEEDLE &
VALVES
25 16 DA25 72.6 (2.86) 19.8 (0.78) 50.5 (1.99) 26.1 (1.03)
32 16 DA32 72.6 (2.86) 19.8 (0.78) 50.5 (1.99) 32.1 (1.26)
40 24 DA40 84.6 (3.33) 31.4 (1.24) 50.5 (1.99) 38.1 (1.50)
50 32 DA50 113 (4.44) 42.6 (1.68) 64.0 (2.52) 50.1 (1.97)
INSTRUMENT
MANIFOLD
SYSTEMS
Sanitary (ISO 2852)➀
MODULAR
SYSTEMD
Sanitary Dimensions, mm (in.)
(ISO 2852) Nominal End Minimum B, Flange C, Flange Pressure
C Size Hose Size Connection A Inside Outside Face Inside Rating
B mm Designator Designator Max Diameter Diameter Diameter bar (psig)
12 8 ES12 58.4 (2.30) 8.6 (0.34) 34.0 (1.34) 9.9 (0.39)
REGULATORS
& FILTERS
A 13 6 ES13 54.1 (2.13) 6.6 (0.26) 34.0 (1.34) 10.3 (0.41)
103 (1500)
20 12 ES20 72.6 (2.86) 13.7 (0.54) 34.0 (1.34) 19.3 (0.76)
➀ 316L SS material with an I.D. 26 12 ES26 73.9 (2.91) 13.7 (0.54) 50.5 (1.99) 23.7 (0.93)
surface finish applies prior to 25 16 ES25 72.4 (2.85) 19.8 (0.78) 50.5 (1.99) 22.6 (0.89) 34.4 (500)
MEASUREMENT
crimp. 40 24 ES40 88.9 (3.50) 31.4 (1.24) 64.0 (2.52) 37.6 (1.48) 34.4 (500)
DEVICES
50 32 ES50 106 (4.16) 42.6 (1.68) 64.0 (2.52) 48.5 (1.91) 31.0 (450)
MEDIUM- HIGH-
PRESSURE
REFERENCES
PFA Series PFA Tubing

FITTINGS
TUBE
Features
■ Chemically resistant, translucent PFA flexible tubing. ■ Designed for use with both Swagelok PFA tube fittings and
■ Smooth-bore, perfluoroalkoxy (PFA) material. metal Swagelok tube fittings.
PIPE, WELD,
■ Groove cutter required for installation of Swagelok PFA

VCR, VCO
FITTINGS
■ Size range of 1/8 through 1 in. and 6 through 12 mm and

working pressures up to 275 psig (18.9 bar). tube fittings. See page 85.
■ PFA tubing material in accordance with ASTM D3307, ■ Tube cutter tool is available. See page 114 for details.
Type II.
STANDARD
■ Flexible tubing commonly used where chemical

TUBING
compatibility is desired.
FLEXIBLE
TUBING
HOSE /
BALL & PLUG
VALVES
Technical Data
Pressure ratings are for properly grooved Swagelok PFA tubing used with Swagelok PFA
DIAPHRAGM
tube fittings and for Swagelok PFA tubing used with metal Swagelok tube fittings.
BELLOWS,
VALVES
Fractional Tubing Metric Tubing

CHECK & RELIEF
Tubing Wall, in. 0.030 0.047 0.062 Tubing Wall, mm 1 1.5

VALVES
Nominal Nominal
Tube Size Tube Size
in. 1/8 1/4 1/4 3/8 1/2 3/4 1 mm 6 8 10 12 6 8 10 12
Temperature Working Pressure Temperature Working Pressure
°F (°C) psig (bar) °C (°F) bar (psig)
METERING
NEEDLE &
VALVES
275 200 275 180 125 83 61 12 8.9 7.0 5.7 19 14 11 8.9

70 (20) 20 (70)
(18.9) (13.7) (18.9) (12.4) (8.6) (5.7) (4.2) (174) (129) (101) (82) (275) (203) (159) (129)
245 180 245 155 115 73 54 9.7 7.1 5.5 4.6 15 11 8.7 7.1
100 (37) 50 (122)
(16.8) (12.4) (16.8) (10.6) (7.9) (5.0) (3.7) (140) (103) (79) (66) (217) (159) (126) (103)
145 110 145 93 68 43 32 6.1 4.4 3.4 2.8 9.5 6.9 5.3 4.4
INSTRUMENT
MANIFOLD
200 (93) 100 (212)

SYSTEMS
(9.9) (7.5) (9.9) (6.4) (4.6) (2.9) (2.2) (88) (63) (49) (40) (137) (100) (76) (63)
87 64 87 48 32 19 13 3.8 2.5 1.8 1.4 5.9 4.0 2.9 2.2
300 (148) 150 (302)
(5.9) (4.4) (5.9) (3.3) (2.2) (1.3) (0.89) (55) (36) (26) (20) (85) (58) (42) (31)
47 34 47 11 11 5.0 3.0 2.2 1.3 0.8 0.6 3.4 2.0 1.3 0.9
400 (204) 200 (392)
(3.2) (2.3) (3.2) (0.75) (0.75) (0.34) (0.20) (31) (18) (11) (8.7) (49) (29) (18) (13)
MODULAR
SYSTEMD
Cleaning and Packaging

Swagelok PFA tubing is cleaned in accordance with Swagelok
REGULATORS
Standard Cleaning and Packaging (SC‑10) catalog,

& FILTERS
MS‑06‑62. Each tube length is bagged individually and boxed.

MEASUREMENT
DEVICES
MEDIUM- HIGH-
PRESSURE
REFERENCES
PFA Series PFA Tubing
FITTINGS
TUBE
Ordering Information PFA Tube Fittings
Swagelok PFA tube fittings in sizes
from 1/8 to 1/2 in. are available
PIPE, WELD,
VCR, VCO
FITTINGS
for use with PFA tubing. Refer
to Swagelok PFA tube fittings
catalog, MS-01-05, for additional
information.
STANDARD
TUBING
Nominal Ordering Nominal Wall
Tube Size Length Number Thickness
Dimensions ft (m) in. Ultrahigh-Purity PFA Tubing (PFA4 and PFA9D)
100 (30.5) PFA-T2-030-100 Swagelok PFA tubing is available
1/8 in. 0.030 in ultrahigh-purity (PFA4) and
FLEXIBLE
500 (152) PFA-T2-030-500
TUBING
HOSE /
advanced (fluorosurfactant
PFA-T4-047-100 0.047
1/4 in. 100 (30.5) resistant) ultrahigh-purity (PFA9D)
PFA-T4-062-100 0.062 grades. Refer to Ultrahigh-Purity
50 (15.2) PFA-T6-062-50 PFA Tubing—PFA4 and PFA9D
3/8 in. 0.062
BALL & PLUG

100 (30.5) PFA-T6-062-100 catalog, MS‑02‑196, for additional
VALVES
50 (15.2) PFA-T8-062-50 information.
1/2 in. 0.062
100 (30.5) PFA-T8-062-100
3/4 in. 50 (15.2) PFA-T12-062-50 0.062
DIAPHRAGM
High-Purity PFA Fine Thread Flare Tube Fittings
BELLOWS,
1 in. 50 (15.2) PFA-T16-062-50 0.062
VALVES
Dimensions m (ft) mm Swagelok high-purity PFA fine
PFA-T6M-1M-30M 1.0 thead flare fittings in sizes from
6 mm
PFA-T6M-1.5M-30M 1.5 1/4 to 1 in. are available for use
CHECK & RELIEF

PFA-T8M-1M-30M 1.0
with PFA tubing. Refer to High-
VALVES
8 mm Purity PFA Fine Thread Flare Tube
PFA-T8M-1.5M-30M 1.5
30 (98.4) Fittings catalog, MS-02-195, for
PFA-T10M-1M-30M 1.0 additional information.
10 mm
PFA-T10M-1.5M-30M 1.5
METERING
PFA-T12M-1M-30M 1.0
NEEDLE &
VALVES
12 mm
PFA-T12M-1.5M-30M 1.5
Custom sizes, wall thickness, and lengths are available. Contact your
authorized Swagelok representative.
INSTRUMENT
MANIFOLD
SYSTEMS
Groove Cutter
• PFA tubing MUST be grooved for use with PFA tube
fittings. Use the Swagelok groove cutter tool. It is
MODULAR
not necessary to groove tubing for use with metal
SYSTEMD
fittings.
Groove PFA tubing for use with Tube

Swagelok PFA tube fittings. Size Ordering
REGULATORS
in. Number
1/8 MS-GC-2 & FILTERS
1/4 MS-GC-4
3/8 MS-GC-6
MEASUREMENT
For 1/4, 3/8, For 1/8 in. 1/2 MS-GC-8

DEVICES
and 1/2 in. tubing tubing

MEDIUM- HIGH-
PRESSURE
REFERENCES
LT Series Vinyl Tubing

FITTINGS
TUBE
Features
■ General purpose, clear vinyl, flexible tubing. ■ Good for a variety of applications where system
■ Smooth-bore, polyvinyl chloride (PVC) material. transparency is desired.
PIPE, WELD,
■ Bulk tubing and end connections available for field

VCR, VCO
FITTINGS
■ Size range of 1/8 through 1/2 in. and working pressures

from vacuum up to 40 psig (2.7 bar). assembly.
■ Can be used with Swagelok tube fitting and metal insert. ■ Thick-wall tubing available in 1/4 and 3/8 in. sizes for
vacuum-service applications.
STANDARD
TUBING
HC series
Clear vinyl material end connection Tubing insert Swagelok tube fitting
FLEXIBLE
TUBING
HOSE /
Hose clamp
BALL & PLUG
VALVES
Technical Data and Ordering Information

■ Pressure ratings are based on tubing used with an HC series end connection
secured by a clamp or with a Swagelok tube fitting and metal insert.
DIAPHRAGM
BELLOWS,
VALVES
■ Tubing is sold in 50 ft (15.2 m) rolls.

■ Select an ordering number.
CHECK & RELIEF
Nominal Nominal Bulk

VALVES
Inside Outside Temperature Working Pressure Tubing

Diameter Diameter Range at 70°F (20°C) Weight Ordering
in. in. °F (°C) psig (bar) lb/ft (kg/m) Number
Standard Wall
1/8 1/4 40 (2.7) 0.02 (0.03) LT-2-4
METERING
NEEDLE &
VALVES
3/16 5/16 30 (2.0) 0.03 (0.04) LT-3-5

–40 to 165
1/4 3/8 25 (1.7) 0.04 (0.05) LT-4-6
(–40 to 73)
3/8 1/2 15 (1.0) 0.05 (0.07) LT-6-8
1/2 5/8 10 (0.68) 0.06 (0.08) LT-8-10
INSTRUMENT
MANIFOLD
SYSTEMS
Thick-Wall Vacuum
1/4 5/8 –40 to 165 Vacuum service over 0.13 (0.20) LT-4-10V
3/8 7/8 (–40 to 73) entire temperature range 0.27 (0.41) LT-6-14V
MODULAR
SYSTEMD
Pressure-Temperature Ratings Cleaning and Packaging

Swagelok vinyl tubing is cleaned in
Standard Wall
accordance with Swagelok Standard
REGULATORS
Nominal Tubing Size

& FILTERS
in. 1/8 3/16 1/4 3/8 1/2 Cleaning and Packaging (SC‑10)
Temperature °F (°C) Working Pressure, psig (bar) catalog, MS‑06‑62. Each roll of tubing
–40 (–40 ) to 70 (20) 40 (2.7) 30 (2.0) 25 (1.7) 15 (1.0) 10 (0.68) is coiled individually and boxed.
80 (26) 38 (2.6) 29 (1.9) 24 (1.6) 14 (1.0) 10 (0.68)
MEASUREMENT
100 (37) 32 (2.2) 24 (1.6) 20 (1.3) 12 (0.82) 8.0 (0.55)

DEVICES
120 (48) 24 (1.6) 18 (1.2) 15 (1.0) 9.0 (0.62) 6.0 (0.41)

140 (60) 16 (1.1) 12 (0.82) 10 (0.68) 6.0 (0.41) 4.0 (0.27)
160 (71) 8.4 (0.57) 6.3 (0.43) 5.3 (0.36) 3.2 (0.21) 2.1 (0.14)
165 (73) 6.4 (0.44) 4.8 (0.33) 4.0 (0.27) 2.4 (0.16) 1.6 (0.11)
MEDIUM- HIGH-
PRESSURE
REFERENCES
HC Series—End Connections for Soft Tubing and Hose
FITTINGS
TUBE
Features
■ HC series end connections allow for easy installation of ■ Reusable for other assemblies.
soft plastic or rubber tubing. ■ May be used without a hose clamp or sleeve in low-
PIPE, WELD,
■ 316 stainless steel or brass material. pressure applications.
VCR, VCO
FITTINGS
■ Size range of 1/8 to 1 in. ■ Use of a hose clamp or sleeve may be required in higher-
pressure applications.
STANDARD
Add SS for 316 stainless steel or B for brass to the basic ordering number.
TUBING
Example: SS-2-HC-1-2
For end connection barb dimensions, see page 89. To determine the cut length of bulk hose for field
assembly, subtract dimension B for each end connection from the desired overall length.
FLEXIBLE
TUBING
HOSE /
NPT and ISO/BSP Tapered ISO/BSP Nominal Dimensions, in. (mm)
(ISO 7) Tapered Tubing Basic Minimum Maximum
Size ID Ordering Inside Outside
BALL & PLUG

B in. in. Number A B Diameter Dimension
VALVES
NPT
1/8 -2-HC-1-2 1.08 (27.4) 0.13 (3.3)
3/16 -3-HC-1-2 1.27 (32.2) 0.13 (3.3)
1/8 0.68 (17.3) 0.51 (12.9)
DIAPHRAGM
A 1/4 -4-HC-1-2 1.47 (37.3) 0.19 (4.8)
BELLOWS,
VALVES
5/16 -5-HC-1-2 1.55 (39.4) 0.19 (4.8)
1/8 -2-HC-1-4 1.26 (32.0) 0.08 (2.0)
3/16 -3-HC-1-4 1.45 (36.8) 0.13 (3.3)
CHECK & RELIEF

1/4 -4-HC-1-4 1.65 (41.9) 0.19 (4.8) 0.65 (16.6)
VALVES
1/4 0.86 (21.8)
5/16 -5-HC-1-4 1.73 (43.9) 0.19 (4.8)
3/8 -6-HC-1-4 1.73 (43.9) 0.30 (7.6)
1/2 -8-HC-1-4 1.80 (45.7) 0.28 (7.1) 0.80 (20.3)
1/4 -4-HC-1-6 1.66 (42.2) 0.87 (22.1) 0.19 (4.8)
METERING
NEEDLE &
VALVES
5/16 -5-HC-1-6 1.74 (44.2) 0.87 (22.1) 0.19 (4.8)
0.80 (20.3)
3/8 3/8 -6-HC-1-6 1.74 (44.2) 0.87 (22.1) 0.30 (7.6)
1/2 -8-HC-1-6 1.81 (46.0) 0.87 (22.1) 0.38 (9.7)
INSTRUMENT
5/8 -10-HC-1-6 1.88 (47.8) 0.90 (22.9) 0.38 (9.7) 1.23 (31.2)
MANIFOLD
SYSTEMS
1/4 -4-HC-1-8 1.85 (47.0) 1.06 (26.9) 0.19 (4.8)
5/16 -5-HC-1-8 1.96 (49.8) 1.09 (27.7) 0.19 (4.8)
1.02 (25.8)
3/8 -6-HC-1-8 1.96 (49.8) 1.09 (27.7) 0.30 (7.6)
1/2
1/2 -8-HC-1-8 2.03 (51.6) 1.09 (27.7) 0.38 (9.7)
MODULAR
SYSTEMD
5/8 -10-HC-1-8 2.07 (52.6) 1.09 (27.7) 0.47 (11.9)
1.23 (31.2)
3/4 -12-HC-1-8 2.14 (54.4) 1.09 (27.7) 0.47 (11.9)
5/8 -10-HC-1-12 2.07 (52.6) 1.09 (27.7) 0.50 (12.7)
1.23 (31.2)
3/4 3/4 -12-HC-1-12 2.14 (54.4) 1.09 (27.7) 0.63 (16.0)
REGULATORS
1 -16-HC-1-12 2.38 (60.5) 1.19 (30.2) 0.63 (16.0) 1.60 (40.5) & FILTERS
3/4 -12-HC-1-16 2.43 (61.7) 0.63 (16.0)
1 1.38 (35.1) 1.60 (40.5)
1 -16-HC-1-16 2.57 (65.3) 0.88 (22.4)
MEASUREMENT
ISO/BSP Tapered
DEVICES
1/8 -2-HC-1-2RT 1.28 (32.5) 0.88 (22.4) 0.08 (2.0)

1/8 0.51 (12.9)
1/4 -4-HC-1-2RT 1.47 (37.3) 0.68 (17.3) 0.19 (4.8)
1/4 -4-HC-1-4RT 1.65 (41.9) 0.19 (4.8)
1/4 0.86 (21.8) 0.65 (16.6)
MEDIUM- HIGH-
3/8 -6-HC-1-4RT 1.73 (43.9) 0.30 (7.6)

PRESSURE
1/4 -4-HC-1-6RT 1.66 (42.2)

3/8 0.87 (22.1) 0.30 (7.6) 0.80 (20.3)
3/8 -6-HC-1-6RT 1.74 (44.2)
3/8 -6-HC-1-8RT 1.96 (49.8) 0.30 (7.6)
1/2 1.09 (27.7) 1.02 (25.8)
1/2 -8-HC-1-8RT 2.03 (51.6) 0.38 (9.7)
REFERENCES

FITTINGS
TUBE
Female Pipe Threads, NPT

Nominal Dimensions, in. (mm)
B NPT Tubing Basic Minimum Maximum
in. in. Number A B Diameter Dimension
PIPE, WELD,
VCR, VCO
FITTINGS
1/8 -2-HC-7-2 1.11 (28.2) 0.71 (18.0) 0.08 (2.0)

1/8 3/16 -3-HC-7-2 1.29 (32.8) 0.70 (17.8) 0.13 (3.3) 0.65 (16.6)
1/4 -4-HC-7-2 1.47 (37.3) 0.68 (17.3) 0.19 (4.8)
A 1/8 -2-HC-7-4 1.26 (32.0) 0.86 (21.8) 0.08 (2.0)
STANDARD
TUBING
3/16 -3-HC-7-4 1.44 (36.6) 0.85 (21.6) 0.13 (3.3)

1/4 1/4 -4-HC-7-4 1.64 (41.7) 0.85 (21.6) 0.19 (4.8) 0.87 (22.1)
5/16 -5-HC-7-4 1.73 (43.9) 0.86 (21.8) 0.19 (4.8)
3/8 -6-HC-7-4 1.69 (42.9) 0.82 (20.8) 0.30 (7.6)
FLEXIBLE
TUBING
HOSE /
1/4 -4-HC-7-6 1.71 (43.4) 0.92 (23.4) 0.19 (4.8)

3/8 5/16 -5-HC-7-6 1.82 (46.2) 0.95 (24.1) 0.19 (4.8) 1.02 (25.8)
3/8 -6-HC-7-6 1.78 (45.2) 0.91 (23.1) 0.30 (7.6)
3/8 -6-HC-7-8 2.03 (51.6) 1.16 (29.5) 0.30 (7.6)
BALL & PLUG
1/2 1.23 (31.2)

VALVES
1/2 -8-HC-7-8 2.13 (54.1) 1.19 (30.2) 0.38 (9.7)

DIAPHRAGM
BELLOWS,
Dimensions
VALVES
B Tube Nominal Basic Minimum Maximum

Adapter Tubing Ordering Inside Outside
Size ID Number A B Diameter Dimension
CHECK & RELIEF
VALVES
1/8 1/8 -2-HC-A-201 1.36 (34.5) 0.96 (24.4) 0.08 (2.0) 0.36 (9.2)
A 1/8 -2-HC-A-401 1.45 (36.8) 1.05 (26.7) 0.08 (2.0) 0.44 (11.0)
1/4 -4-HC-A-401 1.85 (47.0) 0.51 (12.9)
1/4
5/16 -5-HC-A-401 1.93 (49.0) 1.06 (26.9) 0.16 (4.1) 0.51 (12.9)
METERING
NEEDLE &
3/8 -6-HC-A-401 1.93 (49.0) 0.65 (16.6)

VALVES
1/4 -4-HC-A-601 1.91 (48.5) 0.19 (4.8) 0.51 (12.9)

3/8 3/8 -6-HC-A-601 1.99 (50.5) 1.12 (28.4) 0.65 (16.6)
0.27 (6.9)
1/2 -8-HC-A-601 2.06 (52.3) 0.80 (20.3)
INSTRUMENT
MANIFOLD
SYSTEMS
3/8 -6-HC-A-811 2.25 (57.2) 0.30 (7.6) 0.73 (18.4)

1/2 1.38 (35.1)
1/2 -8-HC-A-811 2.32 (58.9) 0.33 (8.4) 0.80 (20.3)
3/4 3/4 -12-HC-A-1211 2.49 (63.3) 1.44 (36.6) 0.58 (14.7) 1.23 (31.2)
1 1 -16-HC-A-1611 3.05 (77.5) 1.86 (47.2) 0.80 (20.3) 1.60 (40.5)
MODULAR
SYSTEMD
6 1/4 in. -4-HC-A-6MTA 47.8 (1.88) 27.7 (1.09) 4.1 (0.16) 12.9 (0.51)
Swagelok tube adapters are to be used only with Swagelok tube fittings.
REGULATORS
& FILTERS

Tube Nominal Dimensions, in. (mm)
B Fitting Tubing Basic Minimum Maximum
MEASUREMENT
in. in. Number A B Diameter Dimension

DEVICES
1/8 -2-HC-1-200 1.42 (36.1) 0.08 (2.0)

1/8 1.02 (25.9) 0.51 (12.9)
1/4 -4-HC-1-200 1.81 (46.0) 0.09 (2.3)
A 1/4 -4-HC-1-400 1.92 (48.8) 1.13 (28.7)

1/4 0.19 (4.8) 0.65 (16.6)
MEDIUM- HIGH-
3/8 -6-HC-1-400 1.99 (50.5) 1.12 (28.5)

PRESSURE
3/8 3/8 -6-HC-1-600 2.06 (52.3) 1.19 (30.2) 0.28 (7.1) 0.87 (22.1)
1/2 1/2 -8-HC-1-810 2.24 (56.9) 1.30 (33.0) 0.38 (9.7) 1.02 (25.8)
REFERENCES
FITTINGS
TUBE
Sanitary Kwik-Clamps
Kwik- Nominal Dimensions, in. (mm)
■ Smooth internal finish (20 µin. Ra)
Clamp Tubing Minimum Maximum
and tapered orifice reduce Size ID Ordering Inside Outside
entrapment and facilitate cleaning. in. in. Number A Diameter Dimension
PIPE, WELD,
VCR, VCO
FITTINGS
3/16 SS-3-HC-8SC 1.10 (27.9) 0.13 (3.3)
1/4 SS-4-HC-8SC 1.28 (32.5) 0.19 (4.8)
1/2 0.99 (25.1)
3/8 SS-6-HC-8SC 1.36 (34.5) 0.30 (7.6)
1/2 SS-8-HC-8SC➀ 1.44 (36.6) 0.38 (9.7)
STANDARD
TUBING
3/16 SS-3-HC-16SC 0.13 (3.3)
1/4 SS-4-HC-16SC 0.19 (4.8)
1 1.50 (38.1) 1.98 (50.3)
3/8 SS-6-HC-16SC 0.30 (7.6)
A
1/2 SS-8-HC-16SC 0.38 (9.7)
FLEXIBLE
TUBING
HOSE /
➀ Without 30° inside diameter taper.
End Connection Barb Dimensions

Nominal
Tubing
BALL & PLUG

ID, in. D E L
VALVES
L
1/8 0.15 (3.7) 0.08 (2.0) 0.40 (9.8)
E D 3/16 0.23 (5.6) 0.12 (2.9) 0.59 (14.5)

1/4 0.30 (7.4) 0.19 (4.7) 0.79 (19.4)
DIAPHRAGM
BELLOWS,
5/16 0.38 (9.3) 0.19 (4.7) 0.87 (21.3)
VALVES
3/8 0.45 (11.0) 0.30 (7.4) 0.87 (21.3)
1/2 0.60 (14.7) 0.38 (9.3) 0.94 (23.0)
5/8 0.75 (19.0) 0.50 (12.7) 0.98 (24.0)
CHECK & RELIEF

3/4 0.90 (22.0) 0.63 (15.4) 1.05 (25.7)
VALVES
1 1.20 (29.4) 0.88 (21.6) 1.19 (29.2)
Sleeves, Clamps, and Inserts Dimensions, in. (mm)
METERING
NEEDLE &
VALVES
Hose Connector Sleeves Hose Hose Maximum
OD ID Ordering Outside
in. in. Number A E Dimension
1/4 1/8 A-2-L-4 0.40 (10.2) 0.26 (6.6) 0.44 (11.0)
E
3/8 1/4 A-4-L-6 0.41 (10.4) 0.65 (16.6)
INSTRUMENT
MANIFOLD
SYSTEMS
7/16 1/4 A-4-L-7 0.79 (20.1) 0.46 (11.7) 0.73 (18.4)
A 1/2 1/4 A-4-L-8 0.52 (13.2) 0.80 (20.3)
7/16 5/16 A-5-L-7 0.48 (12.2) 0.73 (18.4)
■ Used to secure soft plastic or rubber
tubing to hose connectors. 1/2 3/8 A-6-L-8 0.87 (22.1) 0.55 (14.0) 0.80 (20.3)
MODULAR
SYSTEMD
9/16 3/8 A-6-L-9 0.61 (15.5) 0.87 (22.1)
■ Constructed of aluminum.
5/8 7/16 A-7-L-10 0.69 (17.5) 0.94 (23.9)
■ Helically grooved ID and outer hex allow 0.94 (23.9)
for easy installation with a wrench. 11/16 1/2 A-8-L-11 0.76 (19.3) 1.02 (25.8)
1 3/4 A-12-L-16 1.07 (27.2) 1.10 (27.9) 1.45 (36.8)
REGULATORS
■ Reusable for other assemblies.
& FILTERS
Hose Clamps Tubing Inserts
■ Material: ■ Tubing inserts help
Min Max
MEASUREMENT
Band, saddle, Hose Hose secure soft plastic

DEVICES
housing: 304 SS OD OD Ordering Band tubing used with

Screw: 304 SS / in. in. Number Marking standard Swagelok tube fittings.
305 SS 7/16 25/32 MS-HCC-6 6 ■ Some tubing inserts may be non-
■ 4-corner clinched saddle and 1/2 29/32 MS-HCC-8 8 barbed depending on size and
MEDIUM- HIGH-
PRESSURE
housing with no spot welds to 9/16 1 1/16 MS-HCC-10 10 material.

corrode or break. 11/16 1 1/4 MS-HCC-12 12 ■ For materials, ordering information,
■ Smooth inside diameter surface 13/16 1 1/2 MS-HCC-16 16 and dimensions, refer to Gaugeable
provides high sealing pressure and Tube Fittings and Adapter Fittings
reduces torque on screw. catalog, MS-01-140.
REFERENCES
NG Series Nylon Hose

FITTINGS
TUBE
Features
■ Designed for use with natural gas where static dissipation
is required.
PIPE, WELD,
■ Static dissipative, smooth-bore nylon core.

VCR, VCO
FITTINGS
Single hose
■ Size range of 1/4, 3/8 and 1/2 in. and working pressures up
to 5000 psig (344 bar).
■ Internal fiber reinforcement enhances hose pressure rating.
Twin hose (high-pressure vent)
STANDARD
■ Perforated polyurethane cover resists abrasion.

TUBING
■ Single, twin bonded, and vent bonded hoses are available in

custom assemblies.
Vent hose (low-pressure vent)
■ Most popular configurations are available with NGV3.1-2014
Class B and NGV4.2-2014 Class A certification.
FLEXIBLE
TUBING
HOSE /
302 SS spring guard Fiber reinforcement 316 SS end

BALL & PLUG
connections
VALVES
DIAPHRAGM
BELLOWS,
VALVES
CHECK & RELIEF
Perforated polyurethane cover Static dissipative core

VALVES
Technical Data
Minimum Minimum
METERING
NEEDLE &
VALVES
Inside Working Burst Bulk

Hose Nominal Inside Outside Bend Temperature Pressure Pressure Hose
Style Hose Size Diameter Diameter Radius Range at 70°F (20°C) at 70°F (20°C) Weight
(Series) in. (mm) in. (mm) in. (mm) in. (cm) °F (°C) psig (bar) psig (bar) lb/ft (kg/m)
1/4 (6.4) 0.26 (6.6) 0.63 (16.0) 2.00 (5.08) 0.12 (0.17)
INSTRUMENT
MANIFOLD
SYSTEMS
Single
3/8 (9.6) 0.38 (9.6) 0.77 (19.6) 4.00 (10.2) 5000 (344) 20 000 (1378) 0.15 (0.22)
(NGS)
1/2 (12.7) 0.52 (13.2) 0.89 (22.6) 5.50 (14.0) 0.21 (0.32)
Twin 1/4 (6.4) 0.26 (6.6) 0.63 (16.0) 2.00 (5.08) –40 to 150 Fill and vent Fill and vent 0.25 (0.37)
(NGT) 3/8 (9.6) 0.38 (9.6) 0.77 (19.6) 4.00 (10.2) (–40 to 65) 5000 (344) 20 000 (1378) 0.30 (0.44)
MODULAR
SYSTEMD
Fill 0.26 (6.6) Fill 0.63 (16.0)

1/4 (6.4) 2.00 (5.08) 0.15 (0.22)
Vent➀ Vent 0.26 (6.6) Vent 0.63 (16.0) Fill 5000 (344) Fill 20 000 (1378)
(NGV) Fill 0.38 (9.6) Fill 0.77 (19.6) Vent 1500 (103) Vent 6 000 (413)
3/8 (9.6) 4.00 (10.2) 0.25 (0.37)
Vent 0.26 (6.6) Vent 0.63 (16.0)
REGULATORS
➀ L
ow-pressure vent line does not have static dissipative core.
& FILTERS
Testing • Warning:
Every Swagelok NG series hose assembly is pressure All equipment must be properly grounded to allow
tested with water at room temperature for 30 seconds to a static dissipation and help to prevent static sparking.
MEASUREMENT
DEVICES
requirement of no detectable leakage. Testing is performed eriodic inspection of hose assembly is

P
at 5000 psig (344 bar). Every Swagelok NG series hose recommended. End-to-end electrical resistance of
assembly is factory tested for electrical conductivity. the hose assembly must not exceed 1 MΩ per meter
when tested at 500 VDC.
MEDIUM- HIGH-
Cleaning and Packaging

PRESSURE
Swagelok conductive core hose components are cleaned in

accordance with Swagelok Swagelok Standard Cleaning and
Packaging (SC‑10) catalog, MS‑06‑62. Each hose is bagged
individually and boxed; longer hoses are coiled, bagged, and
REFERENCES
boxed.
FITTINGS
TUBE
Custom Hose Assemblies—Single Hose
PIPE, WELD,
VCR, VCO
FITTINGS
STANDARD
TUBING
1 2 3 4 4 5 6
FLEXIBLE
TUBING
HOSE /
SS - NGS 4 - T6 S4 - 40 - F
BALL & PLUG

VALVES
End Connections See End Connection Designator For multiple options, add designators in
SS = 316 stainless steel column in tables on page 93. alphanumeric order with a dash between
For fitting dimensions, see End each designator.
2 Hose Connection tables, page 93. F = Fire jacket
DIAPHRAGM
BELLOWS,
NGS = NG series single nylon hose F1 = Thermosleeve
VALVES
5 Overall Length N3 = Nitrogen pressure test
3 Nominal Hose Size, in. X = No spring guards➀
Insert length in inches.
4 = 1/4 NGV = NGV 3.1 and 4.2 certified
CHECK & RELIEF

6 = 3/8
VALVES
8 = 1/2 ➀ 5 in. spring guards at each end are
standard. The X option should only be used
in static bend applications.
Mat Tags
METERING
NEEDLE &
VALVES
MC = Brown MR = Red
MN = Pink
INSTRUMENT
MANIFOLD
SYSTEMS
Example: MA2
MODULAR
SYSTEMD
of options.
REGULATORS
& FILTERS
MEASUREMENT
DEVICES
MEDIUM- HIGH-
PRESSURE
REFERENCES

FITTINGS
TUBE

Custom Hose Assemblies—Twin and Vent Hoses
PIPE, WELD,
VCR, VCO
FITTINGS
Fill hose
Nozzle 4 5 Dispenser
end end
STANDARD
TUBING
6 Vent hose 7
FLEXIBLE

TUBING
HOSE /
1 2 3 4 5 6 7 8 9 10 11
SS - NGV 6 - S6 T6 S4 P6 - 48 - 1 3 - X
BALL & PLUG
VALVES
1 Material 8 Overall Length (Fill) 10 Vent Hose Dispenser End Length

End Connections Insert length in inches. Adjustment
DIAPHRAGM
BELLOWS,
SS = 316 stainless steel

VALVES
Positive Negative
9 Vent Hose Nozzle End Length X = None X = None
2 Hose Adjustment 1 = 2 in. A = 2 in.
NGT = NG series twin nylon hose 2 = 4 in. B = 4 in.
Positive Negative
CHECK & RELIEF
NGV = NG series vent nylon hose 3 = 6 in. C = 6 in.

X = None X = None
VALVES
4 = 8 in. D = 8 in.
1 = 2 in. A = 2 in.
3 Nominal Fill Hose Size, in. 5 = 10 in. E = 10 in.
2 = 4 in. B = 4 in.
6 = 12 in. F = 12 in.
4 = 1/4 3 = 6 in. C = 6 in.
7 = 15 in. G = 15 in.
6 = 3/8 4 = 8 in. D = 8 in.
8 = 18 in. H = 18 in.
METERING
NEEDLE &
5 = 10 in. E = 10 in.
VALVES
9 = 21 in. J = 21 in.
4 Fill Hose Nozzle End Connection 6 = 12 in. F = 12 in.
0 = 24 in. K = 24 in.
5 Fill Hose Dispenser End Connection 7 = 15 in. G = 15 in.
6 8 = 18 in. H = 18 in. Illustration shows adjustment 3.
Vent Hose Nozzle End Connection
7 9 = 21 in. J = 21 in.
INSTRUMENT
Vent Hose Dispenser End Connection

MANIFOLD
SYSTEMS
0 = 24 in. K = 24 in. 11 Options

See End Connection Designator
Illustration shows adjustment 1. For multiple options, add designators in
column in tables on page 93.
alphanumeric order with a dash between
For fitting dimensions, see End each designator.
Connection tables, page 93.
MODULAR
SYSTEMD
5 in. spring guards at each end are

standard.
X = No spring guards➀
REGULATORS
& FILTERS
NGV = N
GV 3.1 and 4.2 certified
(NGT hose only)
➀ This option should only be used in static
bend applications.
MEASUREMENT
DEVICES
MEDIUM- HIGH-
PRESSURE
REFERENCES
FITTINGS
TUBE
End Connections
Dimensions
PIPE, WELD,
VCR, VCO
FITTINGS
Fitting Hose Connection Inside Outside
A 1/4 1/4 S4➀ 2.57 (65.3) 0.15 (3.8) 0.80 (20.3)
STANDARD
3/8 3/8 S6➀ 2.94 (74.7) 0.24 (6.1) 0.87 (22.1)
TUBING
1/2 1/2 S8➀ 3.30 (83.8) 0.36 (9.1) 1.16 (29.5)
6 G6➀ 65.5 (2.57) 3.8 (0.15) 20.3 (0.80)
1/4 in.
FLEXIBLE
8 G8➀ 65.5 (2.58) 3.8 (0.15) 20.3 (0.80)
TUBING
HOSE /
10 3/8 in. G1➀ 74.9 (2.95) 6.1 (0.24) 22.1 (0.87)
12 1/2 in. G2➀ 83.8 (3.30) 9.1 (0.36) 29.5 (1.16)
➀ N
GV 3.1 and 4.2 certification available.
BALL & PLUG

VALVES
Dimensions
Adapter Hose Connection Inside Outside
DIAPHRAGM
BELLOWS,
VALVES
A 1/4 1/4 T4➀ 2.48 (63.0) 0.15 (3.8) 0.80 (20.3)
1/4 T6➀ 2.47 (62.7) 0.15 (3.8) 0.80 (20.3)
3/8
T6➀ 2.82 (71.6) 0.24 (6.1) 0.87 (22.1)
3/8
CHECK & RELIEF

T8➀ 3.20 (81.3) 0.28 (7.1) 1.09 (27.7)
VALVES
1/2
T8➀ 3.40 (86.4) 0.36 (9.1) 1.16 (29.5)
5/8 1/2 T5➀ 3.40 (86.4) 0.39 (9.9) 1.09 (27.7)
3/4 T7 3.70 (94.0) 0.56 (14.2) 1.31 (33.1)
METERING
NEEDLE &
VALVES
6 E6➀ 65.3 (2.57) 3.8 (0.15) 20.3 (0.80)
1/4 in.
8 E8➀ 62.7 (2.47) 3.8 (0.15) 20.3 (0.80)
10 3/8 in. E1➀ 71.6 (2.82) 6.1 (0.24) 22.1 (0.87)
INSTRUMENT
12 1/2 in. E2➀ 86.4 (3.40) 9.1 (0.36) 29.5 (1.16)
MANIFOLD
SYSTEMS
➀ N
MODULAR
SYSTEMD
REGULATORS
& FILTERS
MEASUREMENT
DEVICES
MEDIUM- HIGH-
PRESSURE
REFERENCES

FITTINGS
TUBE
End Connections
Male Pipe Threads, NPT and Dimensions, in. (mm)
NPT and ISO/BSP Tapered ISO/BSP Nominal
PIPE, WELD,
VCR, VCO
FITTINGS
(ISO 7) Tapered Hose End Minimum Maximum

Size Size Connection Inside Outside
in. in. Designator A Diameter Dimension
NPT
1/4 P4➀ 2.28 (57.9) 0.15 (3.8) 0.80 (20.3)
STANDARD
1/4
TUBING
A
P4➀ 2.65 (67.3) 0.24 (6.1) 0.87 (22.1)
3/8
3/8 P6➀ 2.65 (67.3) 0.24 (6.1) 0.87 (22.1)
1/2 1/2 P8➀ 3.09 (78.5) 0.36 (9.1) 1.16 (29.5)
ISO/BSP Tapered
FLEXIBLE
TUBING
HOSE /
1/4 1/4 K4 2.28 (57.9) 0.15 (3.8) 0.80 (20.3)

3/8 3/8 K6 2.65 (67.3) 0.24 (6.1) 0.87 (22.1)
1/2 1/2 K8 3.09 (78.5) 0.36 (9.1) 1.16 (29.5)
➀ N
BALL & PLUG
VALVES
SAE 37o (JIC) Female

Swivel Nominal
DIAPHRAGM
Hose End Minimum Maximum

BELLOWS,
VALVES
Swivel Size Size Connection Inside Outside

in. in. Designator A Diameter Dimension
1/4 1/4 A4➀ 2.62 (66.6) 0.15 (3.8) 0.80 (20.3)
A 3/8 3/8 A6➀ 3.03 (77.0) 0.24 (6.1) 0.87 (22.1)
CHECK & RELIEF
1/2 1/2 A8➀ 3.34 (84.8) 0.36 (9.1) 1.09 (27.7)

VALVES
➀ N
METERING
NEEDLE &
VALVES
INSTRUMENT
MANIFOLD
SYSTEMS
MODULAR
SYSTEMD
REGULATORS
& FILTERS
MEASUREMENT
DEVICES
MEDIUM- HIGH-
PRESSURE
REFERENCES
7R and 8R Series Nylon Hose
FITTINGS
TUBE
Features
■ SAE general-purpose, hydraulic, nylon hose. ■ Select 8R series hose assemblies are approved to
■ Smooth-bore nylon core. ECE R110; see page 110 for more information.
PIPE, WELD,
■ Designed for use in hydraulic applications where outgassing
VCR, VCO
FITTINGS
■ Size range of 1/4 to 1 in. and working pressures up to
5000 psig (344 bar). is a concern.
■ Internal fiber reinforcement enhances hose pressure rating. ■ Options include hose covers and spring guard. See
page 108 for details.
■ Smooth black polyurethane cover is perforated to prevent
STANDARD
blistering.
TUBING
■ Polyurethane cover resists abrasion.
Fiber reinforcement
Polyurethane cover 316 SS end
FLEXIBLE
TUBING
HOSE /
connections
BALL & PLUG

VALVES
Nylon core
DIAPHRAGM
BELLOWS,
VALVES
Technical Data
Minimum Minimum
CHECK & RELIEF

Nominal Inside Outside Bend Temperature Pressure at Pressure at Hose
VALVES
Specification Hose Size Diameter Diameter Radius Range 70°F (20°C) 70°F (20°C) Weight
SAE J517 1/4 (6.4) 0.25 (6.4) 0.52 (13.2) 1.25 (3.18) 2750 (189) 11 000 (757) 0.07 (0.10)
–40 to 200
100R7 3/8 (9.6) 0.38 (9.8) 0.67 (17.0) 2.00 (5.08) 2250 (155) 9 000 (620) 0.10 (0.15)
(–40 to 93)
(7R series)
METERING
NEEDLE &
1/2 (12.7) 0.50 (12.7) 0.82 (20.8) 3.00 (7.62) 2000 (137) 8 000 (551) 0.14 (0.21)
VALVES
1/4 (6.4)➀ 0.25 (6.4) 0.53 (13.5) 2.00 (5.08) 5000 (344)➁ 20 000 (1378) 0.08 (0.12)
SAE J517 3/8 (9.6) 0.38 (9.8) 0.67 (17.0) 2.50 (6.35) 4000 (275) 16 000 (1102) 0.11 (0.16)
–40 to 200
100R8 1/2 (12.7) 0.50 (12.7) 0.84 (21.3) 4.00 (10.2) 3500 (241) 14 000 (964) 0.15 (0.22)
(–40 to 93)
(8R series)
INSTRUMENT
3/4 (19.0) 0.75 (19.0) 1.15 (29.2) 6.50 (16.5) 2250 (155) 9 000 (620) 0.26 (0.39)
MANIFOLD
SYSTEMS
1 (25.4) 1.00 (25.4) 1.48 (37.6) 10.0 (25.4) 2000 (137) 8 000 (551) 0.39 (0.58)
➀ 1/4 in. (6.4 mm) size does not meet SAE J517 impulse cycle requirements at maximum temperature and minimum bend radius.
➁ Pressure-temperature ratings may be limited by the end connections.
Cleaning and Packaging Ordering Information and Dimensions
MODULAR
SYSTEMD
Swagelok nylon hose components are ■ For custom hose assemblies, see page for 100 for hose sizes, end connections,
cleaned in accordance with Swagelok lengths, and options.
Standard Cleaning and Packaging
(SC‑10) catalog, MS‑06‑62. Each hose
REGULATORS
& FILTERS
is bagged individually and boxed;
longer hoses are coiled, bagged, and
boxed.
MEASUREMENT
DEVICES
MEDIUM- HIGH-
PRESSURE
REFERENCES
7N Series Nylon Hose

FITTINGS
TUBE
Features
■ SAE nonconductive, nylon hose. ■ Hose meets electrical conductivity requirements of
■ Smooth-bore nylon core. SAE J343/SAE J517. Hose is not intended for exposure to
continuous electrical current.
PIPE, WELD,
VCR, VCO
FITTINGS
■ Size range of 1/4 to 1/2 in. and working pressures up to

■ Designed for use with petroleum-based and synthetic
2750 psig (189 bar).
hydraulic fluids where SAE nonconductive properties are
■ Internal fiber reinforcement enhances hose pressure rating.
desired.
■ Smooth orange polyurethane cover is nonperforated to
■ Options include hose covers and spring guards. See
STANDARD
prevent moisture from entering hose.

TUBING
page 108 for details.

■ Polyurethane cover resists abrasion.
FLEXIBLE
Polyurethane cover Fiber reinforcement 316 SS end

TUBING
HOSE /
connections
BALL & PLUG
VALVES
DIAPHRAGM
BELLOWS,
SAE nonconductive nylon core

VALVES
Technical Data
CHECK & RELIEF
Minimum Minimum
VALVES

Specification Hose Size Diameter Diameter Radius Range 70°F (20°C) 70°F (20°C) Weight
1/4 (6.4) 0.26 (6.5) 0.49 (12.4) 1.25 (3.18) 2750 (189) 11 000 (757) 0.07 (0.10)
METERING
SAE J517
NEEDLE &
VALVES
–40 to 200
100R7 3/8 (9.6) 0.38 (9.8) 0.65 (16.5) 2.00 (5.08) 2250 (155) 9 000 (620) 0.10 (0.15)
(–40 to 93)
(7N series) 1/2 (12.7) 0.50 (12.7) 0.80 (20.3) 3.00 (7.62) 2000 (137) 8 000 (551) 0.14 (0.21)
INSTRUMENT
MANIFOLD
SYSTEMS

Swagelok nylon hose components are ■ For custom hose assemblies, see page for 100 for hose sizes, end connections,
MODULAR
SYSTEMD
cleaned in accordance with Swagelok lengths, and options.

Standard Cleaning and Packaging
(SC‑10) catalog, MS‑06‑62. Each hose
is bagged individually and boxed;
REGULATORS
longer hoses are coiled, bagged, and

& FILTERS
boxed.
• Caution:
MEASUREMENT
DEVICES
System media can be conduits

for electricity. Consider system
media properties prior to use.
• Nonperforated covers may
MEDIUM- HIGH-
blister in gas service.

PRESSURE
REFERENCES
7R, 8R, and 7N Series Nylon Hose and 7P Series Polyethylene Hose
FITTINGS
TUBE
End Connections
Select an ordering number. B
To determine the cut length of bulk hose for field assembly,
PIPE, WELD,
subtract dimension B for each end connection from the
VCR, VCO
FITTINGS
desired overall length.
STANDARD
TUBING
Dimensions
B Tube Nominal Minimum Maximum End
FLEXIBLE
TUBING
Adapter Hose Ordering Inside Outside Connection
HOSE /
Size Size Number A B Diameter Dimension Designator
A 1/4 1/4 SS-TP4-TA4 2.48 (63.0) 1.45 (36.8) 0.15 (3.8) 0.80 (20.3) TA4➀
BALL & PLUG

1/4 SS-TP4-TA6 2.47 (62.7) 1.44 (36.6) 0.15 (3.8) 0.80 (20.3) TA6
VALVES
3/8
3/8 SS-TP6-TA6 2.82 (71.6) 1.51 (38.4) 0.24 (6.1) 0.87 (22.1) TA6➀
1/2 1/2 SS-TP8-TA8 3.40 (86.4) 1.84 (46.7) 0.36 (9.1) 1.09 (27.7) TA8➀
5/8 1/2 SS-TP8-TA10 3.40 (86.4) 1.84 (46.7) 0.39 (9.9) 1.09 (27.7) TA10➀
3/4 3/4 SS-TP12-TA12 3.70 (94.0) 1.95 (49.5) 0.56 (14.2) 1.31 (33.1) TA12
DIAPHRAGM
BELLOWS,
VALVES
1 1 SS-TP16-TA16 4.47 (113) 2.26 (57.4) 0.76 (19.3) 1.60 (40.5) TA16
6 1/4 in. SS-TP4-TM6 63.0 (2.48) 36.8 (1.45) 3.8 (0.15) 20.3 (0.80) TM6➀
8 1/4 in. SS-TP4-TM8 62.7 (2.47) 36.6 (1.44) 3.8 (0.15) 20.3 (0.80) TM8➀
CHECK & RELIEF

10 3/8 in. SS-TP6-TM10 71.6 (2.82) 38.4 (1.51) 6.1 (0.24) 22.1 (0.87) TM10➀
VALVES
12 1/2 in. SS-TP8-TM12 86.4 (3.40) 46.7 (1.84) 9.1 (0.36) 27.7 (1.09) TM12➀
METERING
NEEDLE &
VALVES
Dimensions
B Tube Nominal Minimum Maximum End
Fitting Hose Ordering Inside Outside Connection
INSTRUMENT
MANIFOLD
SYSTEMS
A 1/4 1/4 SS-TP4-SL4 2.57 (65.3) 1.54 (39.1) 0.15 (3.8) 0.80 (20.3) SL4➀
3/8 3/8 SS-TP6-SL6 2.94 (74.7) 1.63 (41.4) 0.24 (6.1) 0.87 (22.1) SL6➀
1/2 1/2 SS-TP8-SL8 3.30 (83.8) 1.74 (44.2) 0.36 (9.1) 1.09 (27.7) SL8➀
MODULAR
SYSTEMD
6 1/4 in. SS-TP4-SM6 65.3 (2.57) 39.1 (1.54) 3.8 (0.15) 20.3 (0.80) SM6➀
8 1/4 in. SS-TP4-SM8 65.5 (2.58) 39.4 (1.55) 3.8 (0.15) 20.3 (0.80) SM8➀
1/4 in. SS-TP4-SM10 71.9 (2.83) 45.7 (1.80) 3.8 (0.15) 22.1 (0.87) SM10
10
3/8 in. SS-TP6-SM10 74.9 (2.95) 41.7 (1.64) 6.1 (0.24) 22.1 (0.87) SM10➀
REGULATORS
& FILTERS
12 1/2 in. SS-TP8-SM12 83.8 (3.30) 44.2 (1.74) 9.1 (0.36) 27.7 (1.09) SM12➀
➀ ECE R110 approval available. MEASUREMENT
DEVICES
MEDIUM- HIGH-
PRESSURE
REFERENCES
FITTINGS
TUBE

(ISO 7) Tapered Hose Minimum Maximum End
B
Size Size Ordering Inside Outside Connection
PIPE, WELD,
in. in. Number A B Diameter Dimension Designator

VCR, VCO
FITTINGS
NPT
1/4 SS-TP4-PM4 2.28 (57.9) 1.25 (31.8) 0.15 (3.8) 0.80 (20.3) PM4➀
1/4
A 3/8 SS-TP6-PM4 2.65 (67.3) 1.34 (34.0) 0.24 (6.1) 0.87 (22.1) PM4➀
3/8 3/8 SS-TP6-PM6 2.65 (67.3) 1.34 (34.0) 0.24 (6.1) 0.87 (22.1) PM6➀
STANDARD
TUBING
1/2 1/2 SS-TP8-PM8 3.09 (78.5) 1.53 (38.9) 0.36 (9.1) 1.09 (27.7) PM8➀
ISO/BSP Tapered
1/4 1/4 SS-TP4-MT4 2.28 (57.9) 1.25 (31.8) 0.15 (3.8) 0.80 (20.3) MT4➀
3/8 3/8 SS-TP6-MT6 2.65 (67.3) 1.34 (34.0) 0.24 (6.1) 0.87 (22.1) MT6➀
FLEXIBLE
TUBING
HOSE /
1/2 1/2 SS-TP8-MT8 3.09 (78.5) 1.53 (38.9) 0.36 (9.1) 1.09 (27.7) MT8➀
Male ISO/BSP Parallel

ISO/BSP
Threads with 60° Male
BALL & PLUG
Parallel,
VALVES
Cone (ISO 228) 60° Male Nominal Dimensions, in. (mm)

B
Cone Hose Minimum Maximum End
1/4 1/4 SS-TP4-MS4 2.53 (64.3) 1.50 (38.1) 0.15 (3.8) 0.80 (20.3) MS4
DIAPHRAGM
BELLOWS,
VALVES
3/8 3/8 SS-TP6-MS6 2.73 (69.3) 1.42 (36.1) 0.24 (6.1) 0.87 (22.1) MS6
A
1/2 1/2 SS-TP8-MS8 3.00 (76.2) 1.44 (36.6) 0.36 (9.1) 1.23 (31.2) MS8
CHECK & RELIEF

VALVES

Swivel
Swivel Hose Minimum Maximum End
B Size Size Ordering Inside Outside Connection
1/4 1/4 SS-TP4-AS4 2.62 (66.6) 1.59 (40.4) 0.15 (3.8) 0.80 (20.3) AS4
METERING
NEEDLE &
VALVES
3/8 3/8 SS-TP6-AS6 3.03 (77.0) 1.71 (43.4) 0.24 (6.1) 0.87 (22.1) AS6
A 1/2 1/2 SS-TP8-AS8 3.34 (84.8) 1.77 (45.0) 0.36 (9.1) 1.09 (27.7) AS8
Dimensions shown with swivel nut pushed toward hex.
INSTRUMENT
MANIFOLD
SYSTEMS
Female Swivel ISO/BSP Swivel

60° Cone Parallel
Thread,
MODULAR
60° Nominal
SYSTEMD
B
Cone Hose Minimum Maximum End
1/4 1/4 SS-TP4-BM4 2.45 (62.2) 1.42 (36.1) 0.15 (3.8) 0.87 (22.1) BM4
A
REGULATORS
3/8 3/8 SS-TP6-BM6 2.87 (72.9) 1.56 (39.6) 0.24 (6.1) 1.02 (25.8) BM6
& FILTERS
1/2 1/2 SS-TP8-BM8 3.23 (82.0) 1.67 (42.4) 0.36 (9.1) 1.23 (31.2) BM8
MEASUREMENT
DEVICES
MEDIUM- HIGH-
PRESSURE
REFERENCES
FITTINGS
TUBE
SAE 37° (JIC) Male Flare
JIC Flare Hose Minimum Maximum End
PIPE, WELD,
VCR, VCO
FITTINGS
1/4 1/4 SS-TP4-AN4 2.27 (57.7) 1.24 (31.5) 0.15 (3.8) 0.80 (20.3) AN4➀
A 3/8 3/8 SS-TP6-AN6 2.60 (66.0) 1.29 (32.8) 0.28 (7.1) 0.87 (22.1) AN6➀
1/2 1/2 SS-TP8-AN8 3.09 (78.5) 1.53 (38.9) 0.39 (9.9) 1.09 (27.7) AN8➀
STANDARD
TUBING
Swivel
30° Cone Parallel
Thread, Nominal Dimensions, in. (mm)
FLEXIBLE
TUBING
HOSE /
B 30° Cone Hose Minimum Maximum End
1/4 1/4 SS-TP4-BS4 2.56 (65.0) 1.53 (38.9) 0.15 (3.8) 0.87 (22.1) BS4
BALL & PLUG

3/8 3/8 SS-TP6-BS6 3.00 (76.2) 1.69 (42.9) 0.24 (6.1) 1.02 (25.8) BS6
VALVES
A
1/2 1/2 SS-TP8-BS8 3.38 (85.9) 1.81 (46.0) 0.36 (9.1) 1.23 (31.2) BS8
DIAPHRAGM
Universal Globe Seal,
BELLOWS,
VALVES
Universal
Metric Female Swivel Nut Globe Seal,
Metric
B Female Nominal Dimensions, in. (mm)
Swivel Nut Hose Minimum Maximum End
CHECK & RELIEF

VALVES
mm in. Number A B Diameter Dimension Designator
14 1/4 SS-TP4-MC14 2.38 (60.5) 1.35 (34.3) 0.15 (3.8) 0.87 (22.1) MC14
A
18 3/8 SS-TP6-MC18 2.77 (70.4) 1.46 (37.1) 0.24 (6.1) 1.02 (25.8) MC18
22 1/2 SS-TP8-MC22 3.08 (78.2) 1.51 (38.4) 0.36 (9.1) 0.80 (20.3) MC22
METERING
NEEDLE &
VALVES
INSTRUMENT
MANIFOLD
SYSTEMS
MODULAR
SYSTEMD
REGULATORS
& FILTERS
MEASUREMENT
DEVICES
MEDIUM- HIGH-
PRESSURE
REFERENCES
7R, 8R, and 7N Series Nylon Hose

FITTINGS
TUBE
PIPE, WELD,
VCR, VCO
FITTINGS
STANDARD
TUBING
1 2 3 4 4 5 6 5 6
FLEXIBLE
TUBING
HOSE /
SS - 7R 4 TA4 PM4 - 28 - F or 71CM-F

in. cm
BALL & PLUG

VALVES
SS = 316 stainless steel column in tables on pages 97 to 99. with a dash between each designator.
F = Fire jacket
DIAPHRAGM
BELLOWS,
VALVES
7R =7R series SAE 100R7 nylon hose Inches or centimeters, in whole N3 = Nitrogen pressure test (7R and
(1/4, 3/8, and 1/2 in. sizes only) numbers. Include CM as shown for 8R Series only)
8R =8R series SAE 100R8 nylon hose centimeter lengths. S =302 SS spring guard, hose-
7N =7N series SAE 100R7 length
CHECK & RELIEF
nonconductive nylon hose S2 =302 SS spring guard, 5 in.

VALVES
(1/4, 3/8, and 1/2 in. sizes only) length (1/4 and 3/8 in. sizes only)
T = Lanyard tag
3 Nominal Hose Size, in. T2 = Two lanyard tags
4 = 1/4 (7R, 8R, 7N series only) W = Hydrostatic test
METERING
093 = ECE R110 approval, only on

NEEDLE &
6 = 3/8 (7R, 8R, 7N series only)

VALVES
8 = 1/2 (7R, 8R, 7N series only) 8R hoses with select end

12 = 3/4 (8R series only) connections. See page 110
16 = 1 (8R series only) for additional information.
Mat Tags
INSTRUMENT
MANIFOLD
SYSTEMS
MC = Brown MR = Red
MODULAR
SYSTEMD
MN = Pink
Example: MA2
REGULATORS
& FILTERS

of options.
MEASUREMENT
DEVICES
MEDIUM- HIGH-
PRESSURE
REFERENCES
7P Series—Polyethylene Hose
FITTINGS
TUBE
Features
■ Polyethylene hose designed for use in food, dairy, and water ■ Polyurethane cover resists abrasion.
applications. ■ Polyethylene core material is compliant with FDA 21 CFR Part
PIPE, WELD,
■ Smooth-bore polyethylene core. 177.1520 and NSF-51, for use with food, dairy, and water.
VCR, VCO
FITTINGS
■ Size range of 1/4 to 1 in. and working pressures up to ■ Options include hose covers and spring guards. See
2750 psig (189 bar). page 108 for details.
■ Internal fiber reinforcement enhances hose pressure rating. ■ For electrical properties, see page 5 for details.
STANDARD
■ Smooth, polyurethane blue cover is nonperforated to
TUBING
prevent moisture entrapment and system contamination.
Polyurethane cover Fiber reinforcement 316 SS end
FLEXIBLE
connections
TUBING
HOSE /
BALL & PLUG
VALVES
Polyethylene core
DIAPHRAGM
BELLOWS,
VALVES
Technical Data
Minimum Minimum
CHECK & RELIEF

VALVES
Hose Size Diameter Diameter Radius Range 70°F (20°C) 70°F (20°C) Weight
in. (mm) in. (mm) in. (mm) in. (cm) °F (°C) psig (bar) psig (bar) lb/ft (kg/m)
1/4 (6.4) 0.25 (6.4) 0.52 (13.2) 1.25 (3.18) 2750 (189) 11 000 (757) 0.06 (0.09)
3/8 (9.7) 0.38 (9.7) 0.66 (16.8) 2.00 (5.08) 2250 (155) 9 000 (620) 0.09 (0.13)
METERING
NEEDLE &
VALVES
–10 to 150
1/2 (12.7) 0.50 (12.7) 0.81 (20.6) 3.00 (7.62) 2000 (137) 8 000 (551) 0.12 (0.18)
(–23 to 65)
3/4 (19.0) 0.75 (19.0) 1.14 (29.0) 5.00 (12.7) 1500 (103) 6 000 (413) 0.25 (0.37)
1 (25.4) 1.00 (25.4) 1.48 (37.6) 8.00 (20.3) 1500 (103) 6 000 (413) 0.37 (0.55)
INSTRUMENT
MANIFOLD
SYSTEMS
Swagelok polyethylene hose ■ For custom hose assemblies, see page for 102 for hose sizes, end connections,
components are cleaned in accordance lengths, and options.
MODULAR
SYSTEMD
Packaging (SC‑10) catalog, MS‑06‑62.
Each hose is bagged individually
and boxed; longer hoses are coiled,
bagged, and boxed.
REGULATORS
& FILTERS
• Caution:
Nonperforated covers may
MEASUREMENT
DEVICES
blister in gas service.

MEDIUM- HIGH-
PRESSURE
REFERENCES
7P Series Polyethylene Hose

FITTINGS
TUBE
PIPE, WELD,
VCR, VCO
FITTINGS
STANDARD
TUBING
1 2 3 4 4 5 6 5 6
FLEXIBLE
TUBING
HOSE /
SS - 7P 4 TA4 PM4 - 28 - F or 71CM-F

in. cm
BALL & PLUG

VALVES
SS = 316 stainless steel column in tables on pages 97 to 99. with a dash between each designator.
F = Fire jacket
DIAPHRAGM
BELLOWS,
VALVES
7P = 7P series polyethylene hose Inches or centimeters, in whole S =302 SS spring guard, hose-
numbers. Include CM as shown for length
3 Nominal Hose Size, in. centimeter lengths. S2 =302 SS spring guard, 5 in.
4 = 1/4 length (1/4 and 3/8 in. sizes only)
CHECK & RELIEF
6 = 3/8 T = Lanyard tag

VALVES
8 = 1/2 T2 = Two lanyard tags

12 = 3/4 W = Hydrostatic test
16 = 1 Mat Tags
METERING
NEEDLE &
VALVES
MC = Brown MR = Red
MN = Pink
INSTRUMENT
MANIFOLD
SYSTEMS

Example: MA2
MODULAR
SYSTEMD

of options.
REGULATORS
& FILTERS
MEASUREMENT
DEVICES
MEDIUM- HIGH-
PRESSURE
REFERENCES
PB Series Rubber Hose
FITTINGS
TUBE
Features
■ Ozone-resistant, general-purpose rubber hose with push- ■ Designed for use in general-purpose, compressed air
on connections. applications and oil transfer.
PIPE, WELD,
■ Smooth-bore Buna N core. ■ Bulk hose and end connections available for field
VCR, VCO
FITTINGS
■ Size range of 1/4 to 1 in. and working pressures up to assembly; custom assemblies also available.
350 psig (24.1 bar). ■ Standard hose color is blue; other hose colors include
■ Internal fiber reinforcement enhances hose pressure rating black, green, gray, red, and yellow.
and ensures connection retention. ■ Black hose color provides additional UV and ozone
STANDARD
TUBING
■ Hose cover resists abrasion. resistance due to Neoprene cover.
■ Cover is flame-resistant in accordance with 30CFR Part 18. ■ Options include tags. See page 108 for details.
Buna N or
FLEXIBLE
TUBING
HOSE /
Neoprene cover Synthetic reinforcement Buna N core 316 SS and brass
end connections
BALL & PLUG

VALVES
DIAPHRAGM
BELLOWS,
VALVES
Technical Data
Minimum Working Minimum
Inside Pressure Burst Bulk
CHECK & RELIEF

Nominal Inside Outside Bend Temperature at –40 to 70°F Pressure Hose
VALVES
Hose Size Diameter Diameter Radius Range (–40 to 20°C) at 70°F (20°C) Weight
in. (mm) in. (mm) in. (mm) in. (cm) °F (°C) psig (bar) psig (bar) lb/ft (kg/m)
1/4 (6.4) 0.26 (6.6) 0.51 (12.8) 3.00 (7.62) 350 (24.1) 1400 (96.4) 0.09 (0.13)
3/8 (9.7) 0.39 (9.9) 0.67 (17.0) 3.00 (7.62) –40 to 200 300 (20.6) 1200 (82.6) 0.14 (0.20)
(–40 to 93)
METERING
1/2 (12.7) 0.50 (12.7) 0.75 (19.0) 5.00 (12.7) 300 (20.6) 1200 (82.6) 0.14 (0.20)
NEEDLE &
VALVES
3/4 (19.0) 0.76 (19.3) 1.07 (27.2) 7.00 (17.8) 300 (20.6) 1200 (82.6) 0.25 (0.37)
–20 to 200
1 (25.4) 1.00 (25.4) 1.34 (34.0) 10.00 (25.4) 300 (20.6)➀ 1200 (82.6) 0.33 (0.49)
(–28 to 93)
INSTRUMENT
➀ Working pressure of 1 in. PB hose is 300 psig (20.6 bar) from –20 to 70°F (-28 to 20°C)
MANIFOLD
SYSTEMS
Pressure-Temperature Ratings Cleaning and Packaging
Ratings maintain a minimum factor of 4:1 between Swagelok PB series rubber hose
working pressure and minimum burst pressure. components are cleaned in accordance
MODULAR
SYSTEMD
Nominal 3/8, 1/2, Packaging (SC‑10) catalog, MS‑06‑62.
Hose Size, in. 1/4 3/4 1 Each custom hose assembly is bagged
Temperature, °F (°C) Working Pressure, psig (bar) individually and boxed; longer hoses
REGULATORS
are coiled, bagged, and boxed. Bulk
& FILTERS
–40 (–40) 350 (24.1) 300 (20.6) —
–20 (–28) to 70 (20) 350 (24.1) 300 (20.6) 300 (20.6) rubber hose is packaged and shipped
100 (37) 315 (21.7) 270 (18.6) 270 (18.6) in reels.
150 (65) 210 (14.4) 180 (12.4) 180 (12.4)
200 (93) 100 (6.8) 80 (5.5) 80 (5.5)
MEASUREMENT
DEVICES
• Users must evaluate

compatibility in systems
containing heated water-based
fluids—some conditions may
MEDIUM- HIGH-
PRESSURE
affect the Buna N core.

REFERENCES

FITTINGS
TUBE

■ For bulk hose, see below; for end connections for field assembly, see below.
■ For custom hose assemblies, see page 107 for hose sizes, end connections,
PIPE, WELD,
lengths, and options.

VCR, VCO
FITTINGS
■ For hose cutters for field assembly, see page 114.

■ For a push-on tool for field assembly, see page 114.
STANDARD
Bulk Hose
TUBING
Bulk hose is available in 250 ft (76 m) reels; the standard color

is blue. Select an ordering number from the table below left.
Example: PB-4
FLEXIBLE
For hose of a color other than blue, add a hose color

TUBING
HOSE /
designator from the table below right.

Example PB-4-BK
BALL & PLUG
Nominal Rubber
VALVES
Hose Size Ordering Hose Color Designator Reels contain up to four lengths of hose.
in. Number Black -BK➀
1/4 PB-4 Gray -GY
3/8 PB-6 Green -GR
DIAPHRAGM
BELLOWS,
1/2 PB-8
VALVES
Red -RD
3/4 PB-12 Yellow -YW
1 PB-16
CHECK & RELIEF
VALVES
Field Assembly Instructions

1. Cut a clean, square edge on the end of the hose.
METERING
NEEDLE &
VALVES
INSTRUMENT
MANIFOLD
SYSTEMS
2. Cover the first barb of the end connection with the hose.
MODULAR
SYSTEMD
Note: L
ubricating the end connection barbs with a light
REGULATORS
& FILTERS
oil (i.e. 10W40) may ease assembly.

3. Hold the end connection against a flat surface. Grip the
hose and push with a steady force until the hose seats
flush with the divider tab.
MEASUREMENT
DEVICES
MEDIUM- HIGH-
PRESSURE
• Do not use a hose clamp. Alternatively, see Push-On Tool User Manual MS-CRD-0190,
• Ensure hose is pushed fully until the hose seats flush for instructions on using the Push-On Tool to assist in
REFERENCES
with the divider tab. assembly, see page 114.

FITTINGS
TUBE
End Connections
Select a basic ordering number and add SS for 316 SS or B for brass.
Example: SS-PB4-SL4
PIPE, WELD,
VCR, VCO
FITTINGS
To determine the cut length of bulk hose for field assembly, subtract dimension B for each end connection from the desired
overall length.
STANDARD
TUBING
Tube Nominal
B Fitting Hose Basic Minimum Maximum End
1/4 1/4 -PB4-SL4 1.82 (46.2) 1.08 (27.4) 0.15 (3.8) 0.65 (16.5) SL4
FLEXIBLE
TUBING
HOSE /
3/8 3/8 -PB6-SL6 2.02 (51.3) 1.17 (29.7) 0.26 (6.6) 0.87 (22.1) SL6
A 1/2 1/2 -PB8-SL8 2.34 (59.4) 1.31 (33.3) 0.36 (9.1) 1.01 (25.7) SL8
BALL & PLUG

Dimensions
VALVES
B Tube Nominal Basic Minimum Maximum End
Adapter Hose Ordering Inside Outside Connection
DIAPHRAGM
BELLOWS,
1/4 1/4 -PB4-TA4 1.77 (45.0) 1.03 (26.2) 0.15 (3.8) 0.54 (13.7) TA4
VALVES
A
3/8 3/8 -PB6-TA6 1.97 (50.0) 1.12 (28.4) 0.23 (5.8) 0.71 (18.0) TA6
1/2 1/2 -PB8-TA8 2.43 (61.7) 1.40 (35.6) 0.33 (8.4) 0.81 (20.6) TA8
3/4 3/4 -PB12-TA12 3.14 (79.8) 1.50 (38.1) 0.57 (14.5) 1.08 (27.4) TA12
CHECK & RELIEF

1 1 -PB16-TA16 4.11 (104) 1.88 (47.8) 0.79 (20.1) 1.41 (35.8) TA16
VALVES
6 1/4 in. -PB4-TM6 45.0 (1.77) 26.2 (1.03) 3.8 (0.15) 13.7 (0.54) TM6
1/4 in. -PB4-TM8 45.7 (1.80) 26.9 (1.06) 3.8 (0.15) 13.7 (0.54) TM8
8
METERING
3/8 in. -PB6-TM8 49.3 (1.94) 27.7 (1.09) 5.3 (0.21) 18.0 (0.71) TM8
NEEDLE &
VALVES
10 3/8 in. -PB6-TM10 50.0 (1.97) 28.4 (1.12) 6.6 (0.26) 18.0 (0.71) TM10
12 1/2 in. -PB8-TM12 61.7 (2.43) 35.6 (1.40) 8.1 (0.32) 20.6 (0.81) TM12
18 3/4 in. -PB12-TM18 79.8 (3.14) 38.1 (1.50) 13.7 (0.54) 27.4 (1.08) TM18
INSTRUMENT
25 1 in. -PB16-TM25 104 (4.11) 47.8 (1.88) 19.6 (0.77) 35.8 (1.41) TM25
MANIFOLD
SYSTEMS
MODULAR
SYSTEMD
REGULATORS
& FILTERS
MEASUREMENT
DEVICES
MEDIUM- HIGH-
PRESSURE
REFERENCES

FITTINGS
TUBE

(ISO 7) Tapered Hose Basic Minimum Maximum End
PIPE, WELD,

VCR, VCO
FITTINGS
NPT
1/4 -PB4-PM4 1.68 (42.7) 0.94 (23.9) 0.15 (3.8) 0.65 (16.5) PM4
1/4
3/8 -PB6-PM4 1.72 (43.7) 0.98 (24.9) 0.26 (6.6) 0.80 (20.3) PM4
A
3/8 3/8 -PB6-PM6 1.82 (46.2) 0.97 (24.6) 0.26 (6.6) 0.87 (22.1) PM6
STANDARD
TUBING
1/2 1/2 -PB8-PM8 2.22 (56.4) 1.19 (30.2) 0.36 (9.1) 1.01 (25.7) PM8
3/4 3/4 -PB12-PM12 2.86 (72.6) 1.22 (31.0) 0.60 (15.2) 1.30 (33.0) PM12
1 1 -PB16-PM16 3.75 (95.3) 1.52 (38.6) 0.79 (20.1) 1.74 (44.2) PM16
ISO/BSP Tapered
FLEXIBLE
TUBING
HOSE /
1/4 1/4 -PB4-MT4 1.68 (42.7) 0.94 (23.9) 0.15 (3.8) 0.65 (16.5) MT4
3/8 3/8 -PB6-MT6 1.82 (46.2) 0.97 (24.6) 0.26 (6.6) 0.87 (22.1) MT6
1/2 1/2 -PB8-MT8 2.22 (56.4) 1.19 (30.2) 0.36 (9.1) 1.01 (25.7) MT8
BALL & PLUG
3/4 3/4 -PB12-MT12 2.87 (72.9) 1.23 (31.2) 0.60 (15.2) 1.30 (33.0) MT12
VALVES
1 1 -PB16-MT16 3.75 (95.2) 1.52 (38.6) 0.79 (20.1) 1.74 (44.2) MT16
Unions
DIAPHRAGM
BELLOWS,
Hose Basic Minimum Maximum

VALVES
B
Size Ordering Inside Outside
in. Number A B Diameter Dimension
1/4 -PB4-6 1.87 (47.5) 1.13 (28.7) 0.15 (3.8) 0.54 (13.7)
CHECK & RELIEF
3/8 -PB6-6 2.12 (53.8) 1.27 (32.3) 0.26 (6.6) 0.71 (18.0)
VALVES
A 1/2 -PB8-6 2.50 (63.5) 1.47 (37.3) 0.36 (9.1) 0.81 (20.6)
3/4 -PB12-6 3.76 (95.5) 2.12 (53.8) 0.60 (15.2) 1.08 (27.4)
METERING
NEEDLE &
VALVES
INSTRUMENT
MANIFOLD
SYSTEMS
MODULAR
SYSTEMD
REGULATORS
& FILTERS
MEASUREMENT
DEVICES
MEDIUM- HIGH-
PRESSURE
REFERENCES
FITTINGS
TUBE
PIPE, WELD,
VCR, VCO
FITTINGS
STANDARD
TUBING
1 2 3 4 4 5 6 5 6 7
FLEXIBLE
TUBING
HOSE /
SS - PB 4 TA4 PM4 - 28 - BK or 71CM - BK - CRN
in. cm
1 Material 4 End Connections 6 Hose Color
BALL & PLUG

VALVES
End Connections See End Connection Designator one = Blue, standard hose color
N
SS = 316 stainless steel column in tables on pages 105 and BK = Black
B = Brass 106. GR = Green
GY = Gray
DIAPHRAGM
RD = Red
BELLOWS,
VALVES
2 Hose 5 Overall Length
YW = Yellow
PB = PB series rubber hose
numbers. Include CM as shown for 7 Options
centimeter lengths.
CHECK & RELIEF

4 = 1/4 For multiple options, add designators
VALVES
6 = 3/8 with a dash between each designator.
8 = 1/2 T = Lanyard tag
12 = 3/4 T2 = Two lanyard tags
16 = 1 W = Hydrostatic test
METERING
NEEDLE &
VALVES
Mat Tags
INSTRUMENT
MC = Brown MR = Red
MANIFOLD
SYSTEMS
MN = Pink
MODULAR
SYSTEMD
Example: MA2
REGULATORS
& FILTERS
of options. MEASUREMENT
DEVICES
MEDIUM- HIGH-
PRESSURE
REFERENCES
Options
FITTINGS
TUBE
Covers
Covers do not change hose technical data.
Fire Jacket (Option F) Spiral Guard (Options G6, G7, and G8)
PIPE, WELD,
VCR, VCO
FITTINGS
■ Woven fiberglass coated with specially ■ Helical HDPE plastic.

compounded aerospace-grade orange ■ Highly flexible, protects against
silicone rubber. abrasion.
■ Resists many hydraulic fluids and ■ Covers entire length of hose.
STANDARD
lubricating oils.
TUBING
■ Operating temperature: –180 to 250°F

■ Provides insulation from internal (–117 to 121°C).
system fluid temperature extremes.
■ Standard colors are blue, black, and yellow.
■ Operating temperature: −65 to 500°F (−53 to 260°C) with
short-term flame exposure to 2000°F (1093°C).
FLEXIBLE
316 Stainless Steel Material (Option Z)

TUBING
HOSE /
Thermosleeve (Option F1) ■ Replaces standard 304 stainless steel

overbraid with 316L stainless steel and
■ Braided fiberglass with saturated
300 series stainless steel collar with
synthetic material coating.
BALL & PLUG
316 stainless steel

VALVES
■ Creates a barrier that prevents direct

■ Provides greater corrosion resistance.
contact with the hose and resists
abrasion. Spring Guard (Options S, S2, and S7)
■ Protects hose from weld splatter and ■ Helical 302 stainless
DIAPHRAGM
BELLOWS,
resists effects of UV light.

VALVES
steel.
■ Operating temperature: up to 1000°F (537°C). ■ Highly flexible, protects Hose-Length Spring Guard
against kinking and
Armor Guard (Option A) abrasion.
CHECK & RELIEF
■ Interlocking, flexible 302 stainless steel.

■ Hose-length version
VALVES
■ Highly flexible, protects against kinking covers entire length of 5 in. Long Spring Guard
and abrasion. hose (option S).
■ Covers entire length of hose. ■ Five-inch-long version protects each end of hose
■ Operating temperature: –325 to 750°F (option S2).
METERING
NEEDLE &
VALVES
(–200 to 398°C). ■ Operating temperature: –325 to 850°F (–200 to 454°C).
Testing
INSTRUMENT
MANIFOLD
SYSTEMS
These tests are in addition to the standard testing performed

on each hose series. Total Organic Carbon Measurement (Option TOC)
Helium Leak Testing (Option H7) Total organic carbon is measured in a gas stream through
the product. Results are reported in Toluene equivalent,
■ Inboard helium leak tested to a maximum leak rate of concentration expressed in ng/dm3. Hydrocarbons can be
MODULAR
SYSTEMD
1 × 10 –7 std cm3/s. divided in 2 groups, components with a boiling point below
■ Test certification included with order. 150°C and components with a boiling point above 150°C. See
below specification example:
Hydrostatic Testing (Option W) TOC volatile ≤ 100 ng/dm3 (>150°C)
REGULATORS
& FILTERS
■ Hydrostatic pressure test to 1.5 times the rated working

TOC non-volatile ≤ 10 ng/dm3 (<150°C)
pressure of the hose at 70°F (20°C) with no visible leakage.
Detection limits of 1 ng/dm3 for each separate category can
■ Test certification included with order.
be reached.
■ Customer-specified testing is available; contact your
MEASUREMENT
authorized Swagelok representative. Airborne Particle Count (Option APC)

DEVICES
Airborne particles are measured in a gas stream through the

Nitrogen Pressure Testing (Option N3) product. Particles are measured with a light scattering laser.
■ Nitrogen gas bubble leak test at 200 psig (13.7 bar) with no Particle sizes possible to be measured range from 0,1μm to
visible leakage. 5μm. Sampling volume and limits of particles allowed are
MEDIUM- HIGH-
PRESSURE
derived from ISO 14644-1 cleanroom standard. This standard

■ Test certification included with order.
is written to measure particles in cleanroom air. In this
■ Customer-specified testing is available; contact your situation the standard is applied on product measurements.
authorized Swagelok representative
APC conform ISO 14644-1 Class 3 @ 28,3 Nl/min
REFERENCES
Options
FITTINGS
TUBE
Tags
Lanyard Tag (Option T) Perma Tag (Option P_ )
■ Stainless steel tag with customer- ■ Polyester tag encapsulated in
PIPE, WELD,
VCR, VCO
FITTINGS
specified text. See Hose Tag Text platinum-cured silicone with customer-
table for details. specified text. See Hose Tag Text
■ Attached to the hose with a table for details.
stainless steel lanyard and ■ Attached to the hose with an adhesive.
aluminum clamp.
STANDARD
■ Designed for sterilization-in-place
TUBING
■ Specify a quantity of 1 or 2. (SIP), clean-in-place (CIP), and
autoclave applications.
Clamp Tag (Option T5) ■ Standard colors are black, blue, brown, gray, green,
■ Stainless steel tag with customer- orange, pink, purple, red, white, and yellow.
FLEXIBLE
TUBING
HOSE /
specified text.
■ See Hose Tag Text table for details. Key Color Designator
Limited to 2 lines of text. Gray PA
■ Attached to the hose with two metal Blue PB
BALL & PLUG

bands. Brown PC
VALVES
Green PG
Mat Tag (Option M_ ) Black PK
■ Polyester tag with customer-specified Pink PN
text. See Hose Tag Text table for
DIAPHRAGM
BELLOWS,
Orange PO
VALVES
details.
Purple PP
■ Operating temperature range:
Red PR
–40 to 302°F (–40 to 150°C)
White PW
■ Attached to the hose with an adhesive.
CHECK & RELIEF

Yellow PY
VALVES
■ Standard colors are black, blue,
Add 2 to the end of the
brown, gray, green, orange, pink, Perma Tag designator for
purple, red, white, and yellow. two tags.
Example: PA2
METERING
NEEDLE &
Key Color Designator
VALVES
Gray MA
Hose Tag Text
Blue MB Specify up to 5 lines of text with 25 characters per line
including spaces and commas.
Brown MC
Exception: Clamp tag is limited to 2 lines of text.
INSTRUMENT
MANIFOLD
Green MG
SYSTEMS
Black MK Line
Number For Example
Pink MN
1. Ordering number
Orange MO
2. Process line
MODULAR
Purple MP
SYSTEMD
3. Location
Red MR
4. Supplier phone number
White MW 5. Date of manufacture
Yellow MY
REGULATORS
& FILTERS
Add 2 to the end of the Mat
Tag designator for two tags.
Example: MA2 MEASUREMENT
DEVICES
MEDIUM- HIGH-
PRESSURE
REFERENCES
Options
FITTINGS
TUBE
Approvals
Alternative Fuels-Type Approval (Option 093)
Select FJ series hose assemblies, T series hose assemblies, 8R Series Hose Assemblies:
PIPE, WELD,
VCR, VCO
FITTINGS
and 8R series hose assemblies are available tested, tagged, ■ Operating temperature –40 to 185°F (–40 to 85°C)
and approved to ECE R110. See the table for the nominal
■ Maximum working pressure 3770 psig (260 bar); pressure
sizes and end connections available.
classification 0.
FJ Series Hose Assemblies:
STANDARD
■ Operating temperature –260 to 221°F (–162 to 105°C)

TUBING
■ Maximum working pressure 750 psig (51.7 bar); pressure

classification 5.
T Series Carbon Black-Filled PTFE Hose Assemblies:
FLEXIBLE
■ Operating temperature –40 to 248°F (–40 to 120°C)

TUBING
HOSE /
■ Maximum working pressure 435 psig (30 bar); pressure

classification 1.
BALL & PLUG
VALVES
Processing
Cleaning to CGA 4.1 (Option G):

DIAPHRAGM
BELLOWS,
VALVES
■ Hose wetted surfaces are cleaned to CGA 4.1 for use in

non-oxygen enriched applications.
Cleaning to ASTM G93, Level C (Option C):
CHECK & RELIEF
■ Clean hose assembly wetted surfaces to ASTM G93

VALVES
level C.
Oxygen Service Hazards

METERING
NEEDLE &
VALVES
For more information about hazards and risks of oxygen-

enriched systems, refer to Oxygen System Safety technical
report, MS-06-13.
INSTRUMENT
MANIFOLD
SYSTEMS
MODULAR
SYSTEMD
REGULATORS
& FILTERS
MEASUREMENT
DEVICES
MEDIUM- HIGH-
PRESSURE
REFERENCES
Options
FITTINGS
TUBE
Availability
Availability of options by hose series is shown below, but may be limited by hose size.
Applications, hose operating parameters, and hose length must be considered when selecting options.
PIPE, WELD,
VCR, VCO
FITTINGS
Hose Series
Options FX FM FJ FL AH FN FZ T B X S C J N W F U NG 7R 8R 7N 7P PB
Y Insulation ✓ ✓ ✓ ✓ ✓ ✓ ❍ ✓ ❍ ✓ ✓ ✓ ✓ ✓ ✓
Fire jacket ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓
STANDARD
TUBING
Thermosleeve ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓
Armor guard ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓
Covers
Spiral guard ✓ ❍ ✓ ✓ ✓ ✓ ✓ ✓
Spring guard—
❍ ✓ ✓ ✓ ✓ ✓
FLEXIBLE
Hose length
TUBING
HOSE /
Spring guard—
Std ❍ ❍ ❍ ❍
5 in. long
316L SS braid ✓ Std ✓ Std ❍
Helium leak
BALL & PLUG

✓ ✓ ✓ ✓ ✓ ✓ ✓
VALVES
testing
Testing
Hydrostatic
✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓
testing
Nitrogen
✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓
DIAPHRAGM
pressure testing
BELLOWS,
VALVES
Lanyard tag ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓
Two lanyard
✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓
tags
Tags
CHECK & RELIEF

Clamp tag ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓
VALVES
Mat tag ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ❍ ✓ ✓ ✓ ✓ ✓
Perma tag ❍ ✓ ✓ ✓
Approval
Alternative
fuels-type ECE ❍ ❍ ❍
METERING
NEEDLE &
VALVES
R110
Cleaning to
Processing
✓ ✓ ❍ ✓ ✓ ✓
CGA 4.1
Cleaning to
INSTRUMENT
MANIFOLD
SYSTEMS
ASTM G93, ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓
Level C
Hose Core
Metal
Fluoropolymer
Nylon
Polyethylene
Rubber
MODULAR
SYSTEMD
✓ Available in all sizes. ❍ Select availability
REGULATORS
& FILTERS
MEASUREMENT
DEVICES
MEDIUM- HIGH-
PRESSURE
REFERENCES
Options
FITTINGS
TUBE
Considerations for Hose Insulation

Free Air Convection Humidity and Dew Point
Hoses that transfer cold or hot fluids can impact the Dew point can be approximated using the formula:
PIPE, WELD,
VCR, VCO
FITTINGS
temperature of other nearby fluid systems. When cold hoses Td = T – [(100 - RH)/5]
are routed too close to each other, the surface temperature of
where Td is the dew point temperature (in degrees Celsius), T
the hoses can fall below the dew point, causing condensation
is the ambient air temperature (in degrees Celsius), and RH is
to form. When hot hoses are routed too close to each other,
the relative humidity (in percent).
STANDARD
hot spots can develop that are above allowable temperature

TUBING
parameters. When selecting the number of layers of insulation to prevent

Tm
condensation in an application, use the highest expected
humidity that the hose will experience.
FLEXIBLE
TUBING
Energy Savings
HOSE /
Tambient
Uninsulated hoses are a constant source of wasted energy.

Tambient Tambient Insulation can typically reduce energy losses by up to 90%
and help ensure proper and consistent temperature of plant
BALL & PLUG
equipment. Other reasons to insulate these hoses include:

VALVES
Insulation d Insulation ■ To facilitate proper temperature control to a process, such

as steam or coolant lines.
The smaller the distance (d) between the hoses, the closer ■ To protect the environment and reduce the amount of
the air temperature (Tambient) between the hoses will
energy used for heating purposes, resulting in lower
DIAPHRAGM
BELLOWS,
be to the media temperature (Tm) in the hose. A general

VALVES
emissions.
recommendation is to keep hoses at least 12 in. (31 cm)
apart. If hoses are spaced closer than this, consider using ■ To control surface temperatures for personnel protection
additional layers of insulation. and safety.
CHECK & RELIEF
VALVES
Air Flow Safe-to-Touch Recommendations

ASTM C1055 (Standard Guide for Heated System Surface
Stagnant air creates an undesireable scenario for the surface
Conditions that Produce Contact Burn Injuries) recommends
temperature of the hose due to the decrease in heat transfer
that surface temperatures remain at or below 60°C (140°F), as
coefficient. As air flow increases, surface temperatures will
METERING
NEEDLE &
the average person can touch a 60°C (140°F) surface for up

VALVES
trend more towards the ambient environment temperature.

to five seconds without sustaining irreversible burn damage.
Choosing the proper thickness of insulation can lower the
Approximated
Approximated Air-Heat
Air-Heat TransferCoefficient
Transfer Coefficient external temperature to reduce the chance of a burn injury.
INSTRUMENT
40
2 (W/m K)
MANIFOLD
Heat transfer coefficient

SYSTEMS
35 Bending an Insulated Hose

30
(W/m K)
Hose technical data, including minimum bend radius, does

Heat transfer coefficient
25
20 not change when insulating a hose. However, bending the
15 hose may affect the insulation properties. To minimize these
MODULAR
SYSTEMD
10 effects, employ bends with a larger bend radius. If this is not

5 possible, consider using additional layers of insulation.
0
0 5 10 15 20 25
Velocity(m/s)
Velocity (m/s)
REGULATORS
Insulation
& FILTERS
One worst-case example is when a hose is routed through a stretches

and thins on
confined area, such as a subfloor. In the case of cold media
outside of
flowing through the hose, this could cause condensation to
bend
form on the outside of the hose which may drip onto sensitive
MEASUREMENT
electronics.
DEVICES
Insulation
compresses
on inside of
MEDIUM- HIGH-
PRESSURE
bend
REFERENCES
Options
FITTINGS
TUBE
Y Insulation Option
Features
PIPE, WELD,
■ Rated for continuous hose surface temperature use from ■ Flexible polyolefin heat shrink cover enables the product
VCR, VCO
FITTINGS
-53°C (-65°F) up to 125°C (257°F). to be flexible, vapor permeation resistant, and abrasion
■ Low thermal conductivity aerogel insulation material resistant
minimizes the bulk needed to achieve desired surface ■ Silicone boots at hose ends protect the insulation
temperatures.
STANDARD
TUBING
Cover Layers of Insulation
FLEXIBLE
TUBING
HOSE /
BALL & PLUG
VALVES
Silicone Boot
DIAPHRAGM
BELLOWS,
VALVES
Suffix Code Structure Hose Surface versus Media Temperature on
1/2 in. X Series hose
1 2 3 Media
Media Temperature (ºF)
Temperature (°F)
-Y B 4 -40 -4 32 68 104 140 176 212 248
CHECK & RELIEF

100 212
VALVES
Example hose assembly part number: 2 Layers of Y Insulation
Hose Surface Temperature (°F)

90
(°C)
194
5 Layers of Y Insulation
SS-FJ8TA8TA8-55-YB4
Temperature (ºC)
Hose Surface Temperature (ºF)

80 Dew Point at 55% relative humidity and 23ºC (73ºF) air 176
Temperature
1/2" X Series without Insulation

1 Insulation Designator 70 158
Y = Insulation Option (hose size
METERING
NEEDLE &
60 140
VALVES
1/4 in. and larger)
50 122
Surface
2 Cover Color
Surface
40 104
Standard 30 86
HoseHose
B = Blue
INSTRUMENT
MANIFOLD
SYSTEMS
20 68
R = Red
10 50
Optional
0 32
K = Black
-40 -20 0 20 40 60 80 100 120
W = White
Media Temperature
Media (°C)
Temperature (ºC)
MODULAR
SYSTEMD
3 Layers of Insulation
ominal Radial Thickness
N Test conditions for example plots:
2 = 0.21 in. (5.4 mm) ■ Environment temperature: 23°C (73°F)
3 = 0.30 in. (7.7 mm)
REGULATORS
■ Air flow: Isolated in a chamber with no air flow
& FILTERS
4 = 0.39 in (10.0 mm)
5 = 0.48 in. (12.3 mm) ■ Media Pressure: 6 to 10 psi (0.41 to 0.68 bar)
Nominal Radial Thickness of Insulation ■ Media Flow Rate: 22 to 26 l/min
■ Media type: Liquid
MEASUREMENT
■ Free air around hose: 6 in (15.2 cm)

DEVICES
Hose O.D. R8
Hose I.D.
MEDIUM- HIGH-
PRESSURE
For more information, contact your authorized

REFERENCES
Swagelok sales and service representative.

Tools and Accessories

FITTINGS
TUBE
Assembly Tools for Nylon, Polyethylene, and Rubber Hose

Push-On Tool Cutting Tool for Hose and Soft
Portable, manually operated tool for Tubing
PIPE, WELD,
VCR, VCO
FITTINGS
inserting end connections into nylon, Use to

polyethylene, and rubber hose. cut nylon,
polyethylene, or
rubber hose, as
STANDARD
well as vinyl or
TUBING
PFA tubing to
the desired length for field assembly.
■ Cuts hose and tubing up to 1 in.
nominal size.
FLEXIBLE
TUBING
HOSE /
Ordering number: MS-HC-SC-1A

■ Inserts end connections into 1/4 to
1 in. hose.
■ Bench mounting required.
BALL & PLUG
VALVES
■ 10 in. (25 cm) H, 14 in. (36 cm) W,

28 in. (71 cm) D; 35 lb (15.9 kg).
Ordering number: MS-SPOT
Refer to Swagelok Push-On Tool User’s
DIAPHRAGM
BELLOWS,
Manual, MS‑CRD‑0190, for additional

VALVES
information.
CHECK & RELIEF
VALVES
METERING
NEEDLE &
VALVES
INSTRUMENT
MANIFOLD
SYSTEMS
MODULAR
SYSTEMD
REGULATORS
& FILTERS
MEASUREMENT
DEVICES
See SAE J1273, Recommended Practices for Hydraulic Hose

Assemblies, for information on installation and use of hose. • WARNING
www.sae.org
MEDIUM- HIGH-
Do not mix/interchange Swagelok products or

PRESSURE
components not governed by industrial design

standards, including Swagelok tube fitting end
connections, with those of other manufacturers.
REFERENCES
MS-01-180, RevAB, March 2023

Introduction
Since 1947, Swagelok has designed, developed, and manufactured high-quality,
general-purpose and specialty fluid system products to meet the evolving needs of
global industries. Our focus is on understanding our customers’ needs, finding timely
solutions, and adding value with our products and services.
We are pleased to provide this global edition of the book-bound Swagelok Product
Catalog, which compiles more than 100 separate product catalogs, technical bulletins,
and reference documents into one convenient, easy-to-use volume. Each product
catalog is up to date at the time of printing, with its revision number shown on the last
page of the individual catalog. Subsequent revisions will supersede the printed version
and will be posted on the Swagelok website and in the Swagelok electronic Desktop
Technical Reference (eDTR) tool.
For more information, visit your Swagelok website or contact your authorized
Swagelok sales and service representative.
Warranty Information Not all trademarks listed below apply to this catalog.
Swagelok, Cajon, Ferrule-Pak, Goop, Hinging-Colleting,
IGC, Kenmac, Micro-Fit, Nupro, Snoop, Sno-Trik, SWAK, VCO,
Swagelok products are backed by The Swagelok Limited Life- VCR, Ultra-Torr, Whitey—TM Swagelok Company
time Warranty. For a copy, visit swagelok.com or contact your 15-7 PH—TM AK Steel Corp.
AccuTrak, Beacon, Westlock—TM Tyco International Services
authorized Swagelok representative. Aflas—TM Asahi Glass Co., Ltd.
Alleima—TM Alleima
ASCO, El-O-Matic—TM Emerson
AutoCAD—TM Autodesk, Inc.
CSA—TM Canadian Standards Association
Safe Product Selection Crastin, DuPont, Kalrez, Krytox, Teflon, Viton—TM E.I. duPont
Nemours and Company
When selecting a product, the total system design must DeviceNet—TM ODVA
be considered to ensure safe, trouble-free performance. Dyneon, Elgiloy, TFM—TM Dyneon
Elgiloy—TM Elgiloy Specialty Metals
Function, material compatibility, adequate ratings, Festo—TM Festo SE & Co. KG
FM —TM FM Global
proper installation, operation, and maintenance are the Grafoil—TM GrafTech International Holdings, Inc.
responsibilities of the system designer and user. Honeywell, MICRO SWITCH—TM Honeywell
MAC—TM MAC Valves
Microsoft, Windows—TM Microsoft Corp.
NACE—TM NACE International
PH 15-7 Mo, 17-7 PH—TM AK Steel Corp
• WARNING picofast—Hans Turck KG
Pillar—TM Nippon Pillar Packing Company, Ltd.
Do not mix/interchange Swagelok products or Raychem—TM Tyco Electronics Corp.
Sandvik, SAF 2507—TM Sandvik AB
components not governed by industrial design Simriz—TM Freudenberg-NOK
standards, including Swagelok tube fitting end SolidWorks—TM SolidWorks Corporation
UL—Underwriters Laboratories Inc.
connections, with those of other manufacturers. Xylan—TM Whitford Corporation
© 2022 Swagelok Company

Ms-01-180 - Swagelok Hoses Brochure

Uploaded by

Copyright:

Available Formats

Ms-01-180 - Swagelok Hoses Brochure

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Ms-01-180 - Swagelok Hoses Brochure

Uploaded by

Copyright:

Available Formats

Hose and Flexible Tubing 1

■ Nominal hose sizes 1/8 to 2 in.

■ Wide range of fractional and metric end connections

■ Custom lengths available

■ Optional covers, tagging, and testing

Swagelok® Hose and Flexible Metal Hose Hybrid Hose

FX Series Metal Hose, 11 FP Series Hybrid Hose, 47

Considerations for Selecting a Fluoropolymer Hose

T Series PTFE Hose, 50

Swagelok Hose and Flexible

FJ Series Metal Hose, 22

B Series PTFE Hose, 56

FL Series Metal Hose, 27

X Series PTFE Hose, 58

AH Series Metal Hose, 33

S Series PTFE Hose, 60

Metal Flexible Tubing

C Series PTFE Hose, 62

TA to match the Microsoft Teams image png

J Series PTFE Hose, 64

TA to match the first one

TA to match the Microsoft Teams image png

N Series PTFE Hose, 66

Considerations for Hose

BALL & PLUG

Y Insulation Option, 113

CHECK & RELIEF

7P Series Polyethylene Hose, 101

LT Series Vinyl Tubing, 86

HC Series—End Connections for

Dimensions, in inches (millimeters), are for reference only

and are subject to change. Dimensions are shown with

Swagelok nuts finger-tight. For Swagelok nut dimensions,

Swagelok Hose and Flexible Tubing Nomenclature

Hose Minimum Dynamic Bend Radius Permeation

one point to another. application. are permeable to a degree and

An application in which the hose

stationary and does not move in any

Inside Center line

longer hose lengths of fluoropolymer A

Hose Size A Inside Outside

Splice dimensions shown in the

be needed to compensate for the

2 (50.8) 6.90 (175) 1.68 (42.6) 2.74 (69.6)

BALL & PLUG

CHECK & RELIEF

Swagelok Hose and Flexible Tubing Nomenclature

provide a means of installation

Live Length (L)

Overall Length (OAL)

Braid (Overbraid) Overall Length (OAL) End Connection Length (A)

reinforcement. end to end for a hose connection.

The innermost material of the hose

that carries the system media, often

Spring Guard Reinforcement

A helical metal spring used to Material used to

Cover Minimum Inside Diameter

The outermost material of a hose, used to The smallest inside diameter of

Swagelok Hose and Flexible Tubing Selection Guide

FM Convoluted 316L SS 316L SS braid — 16

FX Series Metal Hose, 11 FP Series Hybrid Hose, 47

T Series PTFE Hose, 50

FJ Series Metal Hose, 22

B Series PTFE Hose, 56

FL Series Metal Hose, 27

X Series PTFE Hose, 58

AH Series Metal Hose, 33

S Series PTFE Hose, 60

C Series PTFE Hose, 62

J Series PTFE Hose, 64

N Series PTFE Hose, 66

7P Series Polyethylene Hose, 101

LT Series Vinyl Tubing, 86

to a maximum leak rate of 1 × 10 –5

std cm3/s. Packaging (SC‑10) catalog, MS‑06‑62. the working pressure rating.

Z = 316L SS collar and braid

See page 108 for detailed descriptions