E14F05P09
E14F05P09
l Designed for network modernization application, introduction of LTE700 and LTE800 on existing site
l Twin configuration
l New 4.3
4.3--10 connectors for improved PIM performance and size reduction
General Specifications
Product Family CBC79X
Modularity 2-Twin
Includes Mounting hardware
Electrical Specifications
Sub
Sub--module 1|2 1|2
Branch 1 2
Port Designation 694
694--862 880
880--960
APT 700
EDD 800
License Band LMR 750 CEL 900
USA 700
USA 750
Product Classification
Product Type Diplexer
page 1 of 6
August 16, 2018
©2018 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks,
respectively, of CommScope.All specifications are subject to change without notice. See www.commscope.com for the
most current information. Revised: August 8, 2018
E14F05P09
Electrical Specifications
Impedance 50 ohm
page 2 of 6
August 16, 2018
©2018 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks,
respectively, of CommScope.All specifications are subject to change without notice. See www.commscope.com for the
most current information. Revised: August 8, 2018
E14F05P09
Block Diagram
Logic Table
Mechanical Specifications
RF Connector Interface 4.3-10 Female
RF Connector Interface Body Style Medium neck
Color Gray
Mount Type Pole | Wall
Mounting Pipe Diameter 42.6–122 mm
page 3 of 6
August 16, 2018
©2018 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks,
respectively, of CommScope.All specifications are subject to change without notice. See www.commscope.com for the
most current information. Revised: August 8, 2018
E14F05P09
Dimensions
Height 210.0 mm | 8.3 in
Width 156.0 mm | 6.1 in
Depth 130.0 mm | 5.1 in
Volume 4.2 L
Weight 5.9 kg | 13.0 lb
Weight, without mounting hardware 5.3 kg | 11.7 lb
Environmental Specifications
Operating Temperature -40 °C to +65 °C (-40 °F to +149 °F)
Ingress Protection Test Method IEC 60529:2001, IP67
page 4 of 6
August 16, 2018
©2018 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks,
respectively, of CommScope.All specifications are subject to change without notice. See www.commscope.com for the
most current information. Revised: August 8, 2018
E14F05P09
Outline Drawing
page 5 of 6
August 16, 2018
©2018 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks,
respectively, of CommScope.All specifications are subject to change without notice. See www.commscope.com for the
most current information. Revised: August 8, 2018
E14F05P09
Regulatory Compliance/Certifications
Agency Classification
ISO 9001:2008 Designed, manufactured and/or distributed under this quality management system
page 6 of 6
August 16, 2018
©2018 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks,
respectively, of CommScope.All specifications are subject to change without notice. See www.commscope.com for the
most current information. Revised: August 8, 2018