Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Download as pdf or txt
Download as pdf or txt
You are on page 1of 4

E14F05P09

Twin Diplexer, 700-800/900 MHz, (DC Smart Bypass), 4.3-10


connectors

Industry leading PIM performance


Designed for network modernization application, introduction of LTE700 and LTE800 on
existing site
Twin configuration
New 4.3-10 connectors for improved PIM performance and size reduction
DC/AISG SMART bypass functionality

Product Classification
Product Type Diplexer

General Specifications
Product Family CBC79X

Color Gray

Common Port Label COM

Modularity 2-Twin

Mounting Pole | Wall

Mounting Pipe Hardware Band clamps (2)

RF Connector Interface 4.3-10 Female

RF Connector Interface Body Style Medium neck

Dimensions
Height 210 mm | 8.268 in

Width 156 mm | 6.142 in

Depth 130 mm | 5.118 in

Mounting Pipe Diameter Range 42.6–122 mm

Page 1 of 4

©2020 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks,
respectively, of CommScope. All specifications are subject to change without notice. See www.commscope.com for the
most current information. Revised: September 18, 2020
E14F05P09
Outline Drawing

Electrical Specifications
Impedance 50 ohm

License Band, Band Pass APT 700 | CEL 900 | EDD 800 | LMR 750 | USA 700 | USA 750

Electrical Specifications, dc Power/Alarm


dc/AISG Pass-through Method Auto sensing

dc/AISG Pass-through Path See logic table

dc/AISG Pass-through, combiner dc Sensing

Lightning Surge Current 5 kA

Lightning Surge Current Waveform 8/20 waveform

Page 2 of 4

©2020 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks,
respectively, of CommScope. All specifications are subject to change without notice. See www.commscope.com for the
most current information. Revised: September 18, 2020
E14F05P09
Electrical Specifications
Sub-module 1|2 1|2
Branch 1 2
Port Designation 694-862 880-960
License Band APT 700, Band Pass CEL 900, Band Pass
EDD 800, Band Pass
LMR 750, Band Pass
USA 700, Band Pass
USA 750, Band Pass

Electrical Specifications, Band Pass


Frequency Range, MHz 694–862 880–960
Insertion Loss, typical, dB 0.2 0.2
Return Loss, typical, dB 22 22
Isolation, minimum, dB 50 50
Input Power, RMS, maximum, W 300 300
Input Power, PEP, maximum, W 3000 3000
3rd Order PIM, typical, dBc -160 -160
3rd Order PIM Test Method Two +43 dBm carriers Two +43 dBm carriers

Block Diagram

Logic Table

Page 3 of 4

©2020 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks,
respectively, of CommScope. All specifications are subject to change without notice. See www.commscope.com for the
most current information. Revised: September 18, 2020
E14F05P09

Environmental Specifications
Operating Temperature -40 °C to +65 °C (-40 °F to +149 °F)

Corrosion Test Method IEC 60068-2-11, 30 days

Ingress Protection Test Method IEC 60529:2001, IP67

Packaging and Weights


Included Mounting hardware

Volume 4.2 L

Weight, net 5.9 kg | 13.007 lb

Weight, without mounting hardware 5.3 kg | 11.684 lb

Regulatory Compliance/Certifications
Agency Classification
ISO 9001:2015 Designed, manufactured and/or distributed under this quality management system

Page 4 of 4

©2020 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks,
respectively, of CommScope. All specifications are subject to change without notice. See www.commscope.com for the
most current information. Revised: September 18, 2020

You might also like