Tekafix Windscreen TD - V2 - GB - 06 20
Tekafix Windscreen TD - V2 - GB - 06 20
Tekafix Windscreen TD - V2 - GB - 06 20
TEKAFIX
WINDSCREEN
PROPERTIES
• Excellent adhesion to most substrates present in windscreen bonding and sealing
applications even without a primer.
• Excellent adhesion also on various types of metal, ceramics, varnished wood,
various types of plastic, polycarbonate, PVC.
• For long-lasting bonds and protection against the impact of air humidity,
mechanical and temperature shocks and vibrations.
• Good output even at low temperatures.
• Does not slump in vertical applications.
• Good adhesion on moist surfaces.
• Excellent mechanical properties, high adhesive strength.
• Environment friendly; solvent-, isocyanate- and silicone-free.
• Totally chemically neutral and odourless.
• It can be painted with most epoxide-, polyurethane- and water-based paints and
coatings.
• During hardening a shrinkage of less than 1,5% is observed.
• Resistant to atmospheric effects, UV-light and ageing.
• Does not cause corrosion.
• Electrical resistance: high
• Chemical resistance:
– good chemical resistance:
water, aliphatic solvents, mineral oils, fats, diluted inorganic acids and bases;
– poor chemical resistance/not resistant to:
aromatic solvents, concentrated acids and chlorinated hydrocarbons.
• Colour: black.
USE
• For sealing and bonding of windscreens and other types of screens to the body of
passenger cars, coaches, trains, vessels, trailers, forklifts and tractor cabins.
• For sealing and bonding of front, rear and side screens to the body of passenger
cars, trailers, forklifts and tractor cabins.
• For construction bonding in the industry of coaches, trains and machinery.
• For highly demanding industrial applications.
• For sealing and bonding in the industry of machinery, ventilation and air-
conditioning devices and in the power generation industry.
Withstands
heavy loads
Tekafix Windscreen
This one-component, elastic, fast-curing
adhesive and sealant with excellent
Fast hardening
mechanical properties and high end
strength is an excellent solution for
windscreen bonding and sealing
applications. UV resistance
Tekafix Windscreen
|1/3|
TECHNICAL DATA
Fresh sealant
Base MS-polymer
Appearance paste
Curing mechanism by air humidity
Specific gravity 1470±30kg/m³
Skin formation time 23°C/50% rel. humid. 15±5min.
Hardening time 23°C/50% rel. humid. 2–3mm/day
Resistance to flow ISO 7390 1–2mm
Application temperature between +5°C and +30°C
Cured sealant
Hardness Shore A ISO 868 45–55
Tensile strength ISO 8339 1,7±0,3MPa aluminium
1,7±0,3MPa glass
Module E 100% ISO 8339 1,2±0,3MPa aluminium
1,2±0,3MPa glass
Elongation at break ISO 8339 200±50% aluminium
200±50% glass
Tensile strength ISO 37–1 2,3±0,3MPa
Elongation at break ISO 37–1 250±50%
Temperature resistance -40°C to +90°C
between
APPLICATION
Joint and surface preparation
Before applying the adhesive make sure the surface is clean, dust and grease-free, solid and
without any badly attached pieces. The surface should be cleaned with Teka Cleaner; wipe
the surface well with a cloth to remove any impurities and residues of Teka Cleaner.
To increase durability of the adhesive it is recommended that you protect the surface to be
bonded, namely:
• only bond glass with a protective ceramic lining on the inner side;
• apply a rubber gasket over the bonded surface on the external side of the glass.
PACKAGING
• 290ml cartridge
• 600ml sausage
STORAGE
12 months in a dry place at a temperature between +5 and +25°C in originally closed
packaging.
Tekafix Windscreen
|2/3|
HEALTH, SAFETY HANDLING AND DISPOSAL INFORMATION
Additional information on safety, safe handling instructions and personal protective equipment as
well as disposal information are available in a safety data sheet. Safety data sheet is available
upon request. You can also ask your TKK distributor for a copy.
WARNING
Instructions contained in this document are based on our research and experience, however,
due to specific conditions and working methods we recommend that you perform preliminary
tests prior to any application of our products.
Tekafix Windscreen TKK d.o.o., Srpenica 1, 5224 Srpenica, Tel: +386 38 41 300, info@tkk.si, www.tkk.si
|3/3|