Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                

Geochemical Cycles

Download as pdf or txt
Download as pdf or txt
You are on page 1of 16

Disclaimer:

This presentation is a part of the


assignment for MSc III Semester
Mineral Exploration theory paper.
This is an attempt to enable the
students to collect and review the
literature, prepare powerpoint
presentation and present the work,
independently. The data and
literature used here has been taken
from various sources, and duly
acknowledged. This can help as a
guideline, and should not be
treated as final.
October 2016
 CONTENTS:-
1.-Introduction
2. Mobility of elements
3.The geological cycle
4.Chemistry of igneous rocks
5.Association of elements
6.Dispersion and patterns.
 INRODUCTION -
 In the lithosphere the geochemical cycle begins
with the
 initial crystallization of magma
 Which proceed through the alteration
 weathering of the igneous rock
 the transportation and deposition of materials
 Thus produced and continuous through diagenesis and
lithification to metamorphism of successively higher
grade until eventually, by anatexis and palingenesis,
magma is regenerated.
 It receives “primary” magma from below
bringing energy with in it in the form of heat.
 The surface recieves energy from outside of
the earth in the form of solar radiation.
 The geochemical cycle provides a useful
concept as a basis for that descussion of many
aspects of geochemistry.
 Mobility of elements
 Mobility of elements is of much importance in
geochemical prospecting:-
 It determines the nature of the dispersion patterns.
 Mobility controlled by many physical chemical and
biological factors.
 The material carried by water the most mobile.it is
controlled by pH.
 The mobility of elements may be quite different from
those characteristic of normal environments.
Chemistry of Igneous Rocks
 Characterization of different types (having different
chemistries):
 Ultramafic  Mafic  Intermediate  Felsic

 Composition commonly presented in weight % of the


oxides
 40-78% SiO2
 12-18% Al2O3
ASSOCIATION OF ELEMENTS
Elements having similar relative mobility
tend to occur together.
Geochemical associations have led to the
concept of path finder elements
Path finder are as follows :-
 1. as content of wall rock,soil &sediment for
vein Au ore.
 2. Hg content of wall rock and soil for
complex Pb-Zn-Ag ores.
 3. Se content of gossan and soil for sulphides
 4. Ag content of soil for Ag-bearing Au ore.
 5.SO4 content of water for sulphide
deposits.
DISPERSION AND DISPERSION PATTERNS:-
PATTERNS
 The interaction of mechnical and chemical process causes
dispersion of elements.

 Mechnical agencies alone cause dispersion of elements through


movement of material processes like glacial action.

 In chemical action, on the other elements get shorted and


dispersed depending on their mobility.

 Dispersion may be either primary or secondary.


 Primary dispersion takes place in an environment of high
pressure & high temperature in deep seated rocks.

 Secondary dispersion takes place near the surface at low pressure


& low temperature conditions.
DISPERSION PATTERNS:-
PATTERNS:-
 Elements are distributed in a systematic way forming
different pattern which are known as dispersion pattern.
 Three types of primary dispersion pattern are as
follows:-
1)Geochemical province
2) dispersion and aqueous fluids
3) Gaseous dispersion

Secondary dispersion pattern can be classified as :-


1)Halos,
2)fans
3)trains,
according to their characteristic shape and
relationship to the ore deposit .
THANKING
YOU

You might also like