Manual de Servicio Yamaha PSR-170

www.freeservicemanuals.
info 3/24/2019
SERVICE MANUAL
■ CONTENTS
SPECIFICATIONS .............................................................................. 3
PANEL LAYOUT ................................................................................. 4
BLOCK DIAGRAM ............................................................................. 5
CIRCUIT BOARD LAYOUT & WIRING .............................................. 6
DISASSEMBLY PROCEDURE .......................................................... 7
LSI PIN DESCRIPTION ................................................................... 10
IC BLOCK DIAGRAM ....................................................................... 11
CIRCUIT BOARDS .......................................................................... 12
TEST PROGRAM ............................................................................ 15
MIDI IMPLEMENTATION CHART .................................................... 17
OVERALL CIRCUIT DIAGRAM
This document is printed on chlorine free (ECF) paper with soy ink. PARTS LIST
PK 001652
1.412K-355 Printed in Japan ’01.05
Digitized in Heiloo the Netherlands Not for sale!
www.freeservicemanuals.info 3/24/2019
PSR-170
IMPORTANT NOTICE
This manual has been provided for the use of authorized Yamaha Retailers and their service personnel. It has been assumed
that basic service procedures inherent to the industry, and more specifically Yamaha Products, are already known and
understood by the users, and have therefore not been restated.
WARNING : Failure to follow appropriate service and safety procedures when servicing this product may result in
personal injury, destruction of expensive components and failure of the product to perform as
specified. For these reasons, we advise all Yamaha product owners that all service required should
be performed by an authorized Yamaha Retailer or the appointed service representative.
IMPORTANT : This presentation or sale of this manual to any individual or firm does not constitute authoriza-tion,
certification, recognition of any applicable technical capabilities, or establish a principal-agent
relationship of any form.
The data provided is believed to be accurate and applicable to the unit (s) indicated on the cover. The research engineering,
and service departments of Yamaha are continually striving to improve Yamaha products. Modifications are, therefor, inevitable
and changes in specification are subject to change without notice or obligation to retrofit. Should any discrepancy appear to
exist, please contact the distributor’s Service Division.
WARNING : Static discharges can destroy expensive components. Discharge any static electricity your body
may have accumulated by grounding yourself to the ground bus in the unit (heavy gauge black wires
connect to this bus).
IMPORTANT : Turn the unit OFF during disassembly and parts replacement. Recheck all work before you apply
power to the unit.
WARNING : CHEMICAL CONTENT NOTICE !

The solder used in the production of this product contains LEAD. In addition, other electrical/electronic and/or plastic
(where applicable) components may also contain traces of chemicals found by the California Health and Welfare Agency
(and possibly other entities) to cause cancer and/or birth defects or other reproductive harm.
DO NOT PLACE SOLDER, ELECTRICAL/ELECTRONIC OR PLASTIC COMPONENTS IN YOUR MOUTH FOR ANY
REASON WHAT SO EVER!
Avoid prolonged, unprotected contact between solder and your skin! When soldering, do not inhale solder fumes or expose
eyes to solder/flux vapor!
If you come in contact with solder or components located inside the enclosure of this product, wash your hands before
handling food.
■ WARNING
Components having special characteristics are marked Z and must be replaced with parts having specification equal to
those originally installed.

PSR-170
■ SPECIFICATIONS
Keyboard Speakers
61 standard-size keys (C1 - C6) 10cm x 2
Display Power consumption

Large multi-function LCD display (backlit) VL/CSA 6-8W, CE7.5W (when using PA-3B power adaptor)
Setup Power supply

STANDBY/ON Adaptor : Yamaha PA-3B AC power adaptor
MASTER VOLUME : MINI-MAX Batteries : Six “D” size, R20P(LR20) or equivalent batteries
Panel controls Dimensions

Overall, SONG, VOICE, STYLE, DEMO, POTABLE 931 x 348.8 x 127.9 mm (36-2/3" x 13-3/4" x 5-1/16")
GRAND, DJ, METRONOME, Dict., L, R, TEMPO/TAP numeric
keypad (0 - 9, +,-) Weight
4.4kg (9 Ibs., 11 oz.)
Voices
100 panel voices (max. polyphony : 16) Supplied accessories
Music Stand, Owner’s Manual, Song Book
Effects
Dual (Included in Voice), Optional accessories
Harmony/Echo (Included in Voice), Headphones : HPE-150
Split (Included in Voice), AC power adaptor : PA-3B
Sustain Keyboard stand : L-2L, L-2C
Auto Accompaniment
100 styles
Fingering : Multi Fingering
Sections : Intro, Main A, B, Ending, Fill
Overall controls
Multi Pad, Grade, Talking, Transpose, Tuning, Accompani-ment
Volume, Song Volume, Metronome Volume
Style controls
Acmp On/Off, Sync-Start, Start, Stop, Intro/Ending, Main A,
B (Auto Fill)
Song controls
Start, Stop, Pause, A-B Repeat, Fast Forward, Rewind, Mel-
ody Voice Change
One Touch Setting

1/style, 1/song
Multi Pads
4 pads x 10 banks
Yamaha Education Suite

Dictionary, Lesson 1-4
Preset songs
100 songs
Amplifier
2.0W + 2.0W
MIDI
IN/OUT
Auxiliary jacks
PHONES/OUTPUT, DC IN 12V, MIDI IN/OUT, SUSTAIN

PSR-170
■ PANEL LAYOUT
● Top Panel
!2
w r !0
q t
e y
o
GrandPno
u !1
!8 i !9 @0
!3 !4 !5 !6 !7
q [MASTER VOLUME] dial !2 Numeric keypad, [+/ON] and [-/OFF] buttons

w Power switch ([STANDBY/ON]) !3 [ACCOMPANIMENT ON/OFF]
e LESSON [L] (Left) and [R] (Right) buttons ([A-B REPEAT]) button
r [Dict.] (DICTIONARY) button !4 [SYNC START] ([ PAUSE]) button
t [OVERALL] button !5 [START/STOP] button
y [SONG] button !6 [INTRO/ENDING] ([ REW]) button
u [VOICE] button !7 [MAIN/AUTO FILL] ([ FF]) button
i [STYLE] button !8 [TEMPO/TAP] button
o [PORTABLE GRAND] button !9 [DEMO] button
!0 [METRONOME] button @0 [MULTI PAD/DJ GAME] buttons
!1 [DJ] button
● Rear Panel
@1 @2 @3 @4
@1 [MIDI IN], [MIDI OUT] terminals @3 [PHONES/OUTPUT] jack

@2 [SUSTAIN] jack @4 [DC IN 12V] jack
4

■ BLOCK DIAGRAM
SASTAIN MIDI MIDI
OUT IN
JK201 JK202 JK203
PN-AM 2/2 SW SW PN-AM 1/2

CN202 CN103
CN201
CN203
CN101
CN02 CN01 BATTERY
1.5V x 6
DM-LCD
DRIVER
DC-IN AC ADAPTER
LCD
LCD
DRIVER
JK101
IC06
REGULATOR
+5D
+5V
STANDBY/ON
ROM
16Mbit +3.3D REGULATOR
+3.3A +3.3V
A0-19
PROGRAM D0-15
IC05
STYLE GEW-12
WAVE
IC01
TR103
IC02 TR101
CL01 TR102
CN03
14MHz
47 44
JK102
11 5
CN04
POWER AMP PHONSE/
RESET 12 BA5417 3 OUTPUT
IC03 IC101
MK-L MK-H
CN102 CN104
IC04
L
2 1
BUFFER
SPEAKERS
YST
KEYBOARD SW MATRIX KEYBOARD SW MATRIX 6 7
CN105
BUFFER R
IC04 CN204
CN106
MASTER
VR
VOLUME
VR101
KEYBOARD
PSR-170
61KEY 28CA1-8819401
5

PSR-170
■ CIRCUIT BOARD LAYOUT & WIRING

● Upper case side
VR DM-LCD LCD Unit
Speaker (L) [WH105] [WH102] [C120] [WH203] Speaker (R)
[WH104] [WH103] [WH201] [WH204]

PN-AM 1/2 PN-AM 2/2
[C130] [C120]
● Lower case side
[M30]
MK-L MK-H
Location Part No. Connector Assembly Destination Remarks

C120 -- MK MK-L DM-LCD-CN03 *1 17P (V718700)
C130 -- BATTRY PN-AM 1/2-CN101 *1 Contact Spring 2P (V718670)
M30 -- MK MK-L MK-H 11P (V719030)
WH102 -- AM PN-AM 1/2-CN102 *1 DM-LCD-CN04 *1 8P (V719700)
WH103 -- PN2 PN-AM 1/2-CN103 *1 PN-AM 2/2-CN202 *1 9P (V719710)
WH104 -- SP PN-AM 1/2-CN104 *1 Speaker L 2P (V719660)
WH105 -- VR VR-CN106 *1 PN-AM 1/2-CN105 *1 5P (V719680)
WH201 -- MIDI PN-AM 2/2-CN201 *1 DM-LCD-CN02 *1 6P (V719690)
WH203 -- PN1 PN-AM 2/2-CN203 *1 DM-LCD-CN01 *1 12P (V719720)
WH204 -- SP PN-AM 2/2-CN204 *1 Speaker R 2P (V719660)
* The parts with “–” in “Part No.” are not available as spare parts.
* 1 : Edge mark is adjusted to Pin 1 mark ( mark).
Caution : Be sure to attach the removed filament tape just as it was before removal.

PSR-170
■ DISASSEMBLY PROCEDURE
1. Lower Case Assembly 1-2. Remove the seven (7) screws marked [250] and
(Time required : About 3 min.) the five (5) screws marked [260]. The lower case
1-1. Remove the battery cover assembly. (Fig. 1) assembly can then be removed. (Fig. 1)
[250] Battery Cover Assembly [260] [260] [250]
[260]
[250] [250] Lower Case Assembly [250]
[250] : Bind Head Tapping Screw-B 3.0X12 MFZN2Y (VE683000)

[260] : Bind Head Tapping Screw-B 3.0X30 MFZN2Y (V7213700)
(Fig. 1)
2. Spring Terminal 2-3. Remove the spring terminal by releasing hooks (2

(Time required : About 10 min.) locations for each). (Fig. 3)
2-1. Remove the lower case assembly. (See procedure 1)
2-2. Remove the BATTERY connector assembly (red/
black) soldered to the spring terminal (+)/(-).
(Fig. 2)
<Top View>
BATTERY Connector BATTERY Connector

Assembly (Red) Lower Case Assembly Assembly (Black)
<Bottom View>
Hook
Hook
Spring Terminal
(Fig. 2) (Fig. 3)

PSR-170
3. PN-AM 1/2 Circuit Board 4. PN-AM 2/2 Circuit Board

(Time required : About 8 min.) (Time required : About 8 min.)
3-1. Remove the lower case assembly. (See procedure 1) 4-1. Remove the lower case assembly. (See procedure 1)
3-2. Remove the twelve (12) screws marked [240A]. 4-2. Remove the eight (8) screws marked [240B]. The
The PN-AM 1/2 circuit board can then be removed. PN-AM 2/2 circuit board can then be removed.
(Fig. 4) (Fig. 4)
VR PN-AM 1/2 PN-AM 2/2

Speaker (L) LCD Unit [240C] x 4 Speaker (R)
[270] x 4 [240D] x 3 [240A] x 12 DM-LCD [240B] x 8 [270] x 4
[240] : Bind Head Tapping Screw-B 3.0X8 MFZN2Y (EP600250)

[270] : Bind Head Tapping Screw-B 4.0X8 MFZN2Y (VP640410)
(Fig. 4)
5. LCD Unit and DM-LCD Circuit Board 6. VR Circuit Board

(Time required : About 10 min.) (Time required : About 8 min.)
5-1. Remove the lower case assembly. (See procedure 1) 6-1. Remove the lower case assembly. (See procedure 1)
5-2. Remove the four (4) screws marked [240C]. 6-2. Remove the volume knob from the control panel
The LCD unit can then be removed. (Fig. 4) side. (Fig. 6)
5-3. Remove the eight (8) screws marked [L50]. 6-3. Remove the three (3) screws marked [240D]. The
The DM-LCD circuit board can then be removed VR circuit board can then be removed. (Fig. 4)
from the LCD unit. (Fig. 5)
Volume Knob
* When you install the DM-LCD circuit board, tighten
the screws from No.1 to No. 8 in order as shown in
Figure 5.
[L50] [L50]
LCD Unit
DM-LCD
(Fig. 6)
7. Speaker (Time required : About 8 min.)

7-1. Remove the lower case assembly. (See procedure 1)
[L50] [L50] 7-2. Remove the right and left speakers by removing
[L50] : Bind Head Tapping Screw-P 3.0X8 MFZN2Y (EP600280) four (4) screws marked [270] from each speaker.
(Fig. 5) (Fig. 4)

PSR-170
8. White key and Black key pushing the hooks of it and slide the black key
(Time required : About 10 min. each) towards you. (Photo 1)
8-1. Remove the lower case assembly. (See procedure 1) 8-3. When removing the C6 key, remove a screw
8-2. Remove the four (4) screws marked [110A] fixing marked [110B] and then lift the back of C6 key
the black and white keys for one octave. The black with pushing the hook of it and slide it towards
and white keys of each octave can then be removed. you. (Fig.7)
(Fig.7) At this time, lift the back of black key with
[110A] [110A] [110A] [110A] [110A] [110B]
Hook
(Photo 1)
[110] : Bind Head Tapping Screw-P 3.0X20 MFZN2 (VT069800)

C6 Key
(Fig. 7)
9. MK-L and MK-H Circuit Board eight (8) screws marked [100A]. The MK-L circuit
(Time required : About 15 min. each) board can then be removed. (Fig. 8)
9-1. Remove the lower case assembly. (See procedure 1) 9-3. Remove the black and white keys (C4–C6).(See
9-2. Remove the black and white keys (C1–B3).(See procedure 8.) Remove the three (3) screws marked
procedure 8.) [90B] and the five (5) screws marked [100B]. The
Remove the four (4) screws marked [90A] and the MK-H circuit board can then be removed. (Fig. 8)
[90A] [90A] [90B]
[100A] [100A] [100A] [100B] [100B]

MK-L MK-H
[90] : Bind Head Tapping Screw-B 3.0X8 MFZN2Y(EP600250)

[100] : Bind Head Tapping Screw-P SP 3.0X12 MFZNBL(VZ313100)
(Fig. 8)

PSR-170
■ LSI PIN DESCRIPTION

● YMW728-F (XU355A00) GEW12 (AWM Tone Generator) DM-LCD : IC001
PIN PIN
NO. NAME I/O FUNCTION NO. NAME I/O FUNCTION
1 PL0 I/O 51 DAC_Vdd Power supply

2 PL1 I/O 52 SYI I Synch. signal
3 PL2 I/O 53 ICN I Inicial Clear
4 PL3 I/O Port L 54 Vss Ground
5 PL4 I/O 55 MA19 O
6 PL5 I/O 56 MA18 O Memory address bus
7 PL6 I/O 57 MA8 O
8 Vdd Power supply 58 Vdd Power supply
9 PA0 I/O 59 MA17 O
10 PA1 I/O 60 MA9 O
11 PA2 I/O Port A 61 MA7 O Memory address bus
12 PA3 I/O 62 MA10 O
13 PA4 I/O 63 MA6 O
14 PA5 I/O 64 MA11 O
15 PB0 I/O 65 Vss Ground
16 PB1 I/O 66 MA5 O
17 PB2 I/O Port B 67 MA12 O
18 PB3 I/O 68 MA4 O Memory address bus
19 PB4 I/O 69 MA13 O
20 PB5 I/O 70 MA3 O
21 Vss Ground 71 MA14 O
22 PC0 I/O 72 Vdd Power supply
23 PC1 I/O 73 MA2 O
24 PC2 I/O 74 MA15 O
25 PC3 I/O Port C 75 MA1 O Memory address bus
26 PC4 I/O 76 MA16 O
27 PC5 I/O 77 MA0 O
28 PD0 I/O 78 MA20 O
29 PD1 I/O 79 Vss Ground
30 PD2 I/O 80 ROMLOEN O OEN pin
31 PD3 I/O Port D 81 MD15 I/O
32 PD4 I/O 82 MD0 I/O
33 PD5 I/O 83 MD7 I/O
34 Vdd Power supply 84 MD8 I/O Memory data Input / output
35 PE0 I/O 85 MD14 I/O
36 PE1 I/O 86 MD1 I/O
37 PE2 I/O Port E 87 MD6 I/O
38 PE3 I/O 88 MD9 I/O
39 PE4 I/O 89 Vdd Power supply
40 PE5 I/O 90 MD13 I/O
41 TESTE I Test Mode E 91 MD2 I/O
42 TESTD I Test Mode D 92 MD5 I/O
43 Vss Ground 93 MD10 I/O
44 DACLMM O 1bit DAC Output L (-) 94 MD12 I/O Memory data Input / output
45 DACLPP O 1bit DAC Output L (+) 95 MD3 I/O
46 DACRPP O 1bit DAC Output R (+) 96 MD4 I/O
47 DACRMM O 1bit DAC Output R (-) 97 MD11 I/O
48 DAC_Vss Ground 98 Vss Ground
49 X_O O Crystal quarts Output 99 MIDII I MIDI Input
50 X_I I Crystal quarts Input 100 MIDIO O MIDI Output
10

PSR-170
● S6A0069X10-Q0RJ (XV226A00) LCD DRIVER DM-LCD : IC006

PIN PIN
NAME I/O FUNCTION NAME I/O FUNCTION
NO. NO.
1 S22 O 41 DB2 I/O
2 S21 O 42 DB3 I/O
3 S20 O 43 DB4 I/O
Data interface
4 S19 O 44 DB5 I/O
5 S18 O 45 DB6 I/O
6 S17 O 46 DB7 I/O
7 S16 O 47 C1 O
8 S15 O 48 C2 O
9 S14 O 49 C3 O
10 S13 O 50 C4 O
11 S12 O Segment signal output for LCD 51 C5 O
12 S11 O driving 52 C6 O
13 S10 O 53 C7 O
14 S9 O 54 C8 O Common signal output for LCD
15 S8 O 55 C9 O driving
16 S7 O 56 C10 O
17 S6 O 57 C11 O
18 S5 O 58 C12 O
19 S4 O 59 C13 O
20 S3 O 60 C14 O
21 S2 O 61 C15 O
22 S1 O 62 C16 O
23 Vss Ground 63 S40 O
24 OSC1 I Oscillator 64 S39 O
25 OSC2 O Oscillator 65 S38 O
26 V1 66 S37 O
27 V2 67 S36 O
28 V3 Power supply 68 S35 O
29 V4 69 S34 O
30 V5 70 S33 O
31 CLK1 O Data latch clock 71 S32 O Segment signal output for LCD
32 CLK2 O Data shift clock 72 S31 O driving
33 Vdd Power supply (+5 V) 73 S30 O
34 M O Altamated signal for LCD driver outout 74 S29 O
35 D O Display data interface 75 S28 O
36 RS I 76 S27 O
37 R/W I Read/write 77 S26 O
38 E I Enable 78 S25 O
39 DB0 I/O Data interface 79 S24 O
40 DB1 I/O Data interface 80 S23 O
■ IC BLOCK DIAGRAM
● µPC4570G2 (XF291A00) ● BA5417 (XV771A00)
Dual Operational Amplifier Power Amplifier
DM-LCD : IC004 PN-AM 1/2 : IC101
Output A 1 +V 8
+DC Voltage
T.S.D
Supply
Inverting
2 7 Output B
Input A - +
Non-Inverting 3 6
Inverting
Input A + - Input B ST. BY
-DC Voltage Supply 4 -V 5 Non-Inverting

BS BS FILTER
Input B
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
(N.C.)
BS2
OUT2
Vcc
OUT1
BS1
POWER-GND
STBY
FILTER
NF1
IN1
IN2
NF2
PRE-GND1
PRE-GND2
11

PSR-170
■ CIRCUIT BOARDS INDEX

DM-LCD (XZ643B0) ............................................................................. 12
PN-AM 1/2 (XZ644B0) ......................................................................... 13
PN-AM 2/2 (XZ644B0) ......................................................................... 14
VR (XZ644B0) ...................................................................................... 14
● DM-LCD Circuit Board

to MK-L
to PN-AM 2/2-CN203
to PN-AM 1/2-CN102 to PN-AM 2/2-CN201
Component side
Pattern side
Note : See parts list for details of circuit board conponent parts. 2NA-V692510 2
12

PSR-170
● PN-AM 1/2 Circuit Board
A-B PAUSE START/ REW FF

REPEAT STOP
to PN-AM 2/2-CN202
ACMP SYNC START/ INTRO/ MAIN/
ON/OFF START STOP ENDING AUTO FULL
to VR-CN106
LESSON LESSON
L R
STANDBY/ON
OVERALL
Dict.
to DM-LCD-CN04
to SPEAKER L
to BATTERY
Component side
DC IN 12V PHONES/
OUTPUT
2NA-V708340 4
13

PSR-170
● PN-AM 2/2 Circuit Board
MULTI PAD/DJ GAME
DEMO 1 2 3 4
STYLE
VOICE
–/OFF 0/RESET +/ON
to DM-LCD-CN01
PORTABLE
GRAND DJ
SONG
7 8 9
4 5 6
METRONOME
to PN-AM 1/2-CN103
1 2 3
to DM-LCD-CN02
to SPEAKER R
Component side
SUSTAIN OUT MIDI IN
● VR Circuit Board
to PN-AM 1/2-CN105
CN106
MASTER VOLUME
Component side
PN-AM 2/2, VR : 2NA-V708340 4
14

PSR-170
■ TEST PROGRAM
1. PREPARATION 3. PROCEEDING THROUGH THE TEST
1) PA-3B or PA-3(AC adaptor) is used. PROGRAM
2) The volume is usually moved to the use position when 1) When the test program is started, “TEST” appears on the
no volume change is required.
LCD.
3) Measuring instruments : frequency counter, level meter 2) Select the test program item to be executed by pressing
(with JIS-C filter)
the [-/NO] or [+/YES] button.
Note : Connect a stereo plug to the [PHONES/OUTPUT]
3) Press the [START/STOP] button to execute testing.
jack at 33 ohms.
4) Jigs : foot switch, MIDI cable ● When the test result is OK, press the [START/STOP]
button to return to the test item name on display.
2. HOW TO ENTER THE TEST PROGRAM Proceed to the next test by pressing the [-/NO] or [+/
While pressing the C2#, F2 and G2# keys, turn the YES] button.
[STANDBY/ON] switch on. When the test result is OK, a cursor (_) is added under
the first character of the test item name on display.
● When the test result is NG, press the lowest (leftmost)

white key on the keyboard to return to the test item name
on display and then turn off the [STANDBY/ON] switch
to end the test program.
4. TEST PROGRAM LIST

TEST No. LCD (initial) Test Functions and Judgment Criteria
1 [001] Version Displays ROM version.
ROM (Program) versions are displayed alternately on the LCD.
2 [002] Rom Chk1 Checks the ROM.
The test results appear on the LCD.
3 [003] Ram Chk1 Checks the RAM. (GEW12)
11 [011] TG1 Chk Outputs the sine wave by changing the channels in sequence from C2 to D#3.
After auto-scaling is finished, individual keys can be played. (If playing two or more
keys simultaneously, the first pressed key has priority to make a sound.)
13 [013] Pit Chk Connect the frequency counter to the [PHONES] jack.
Sets PAN to Center and produces a signal at 440 +/- 1.76 Hz
Check that the correct signal is produced.
14 [014] Output R Connect the level meter (with a JIS-C filter) to the [PHONES] jack. (33 ohm load)
Set the [MASTER VOLUME] at maximum and check the output level (1 kHz).
PHONES L : less than -60.0 dBm PHONES R : -24.5 dBm +/- 2 dB
15 [015] Output L Connect the level meter (with a JIS-C filter) to the [PHONES] jack. (33 ohm load)
Set the [MASTER VOLUME] at maximum and check the output level (1 kHz).
PHONES L : -24.5 dBm +/- 2 dB PHONES R : less than -60.0 dBm
19 [019] Noise Connect the level meter (with a JIS-C filter) to the [PHONES] jack. (33 ohm load)
Set the [MASTER VOLUME] at maximum. Check D/A converter noise.
PHONES L/R : Less than -75.0 dBm
20 [020] SW Chk Check the switches on the panel.
Press the switches on the LCD as instructed. A pre-assigned note is output when the
switch is pressed (See table 1.). As the check result appears on the LCD when all the
switches are pressed as instructed,. Check that OK is displayed. (To stop this check
before reaching its end, press the lowest (leftmost) white key on the keyboard to return
to the test item name on display.
15

PSR-170
TEST No. LCD (initial) Test Functions and Judgment Criteria

28 [028] LCD On Check that all LCD dots are on.
29 [029] LCD Off Check that all LCD dots are off.
31 [031] PD1 Chk Connect the foot switch (FC-4 or FC-5) to the [SUSTAIN] jack.
Check that the C3 note is output when the [START/STOP] button is pressed while
stepping the pedal and the C4 note is output when releasing the pedal.
37 [037] MIDI Chk After connecting the [MIDI IN] jack and [MIDI OUT] jack with a MIDI cable, execute
the test.
Check that the C4 note is output and that the test results appear on the LCD.
41 [041] Rom Chk2 Checks the ROM.
42 [042] Ram Chk2 Checks the RAM. (GEW12)
48 [048] TestExit Exit from the test program after executing this test.
* NOTE : The above tests Nos. 41-42, require approximately 20 minutes to conduct.
● TABLE 1
Order Pitch Order Pitch

Lcd Lcd
of SW Switch name (note num- of SW Switch name (note num-
display display
check ber) check ber)
1 Dictionary 60 (C3) Dict. 18 Tenkey 8 77 (F4) Tenkey 8
2 Lesson L 61 (C#3) Lesson L 19 Tenkey 9 78 (F#4) Tenkey 9
3 Lesson R 62 (D3) Lesson R 20 Tenkey – 79 (G4) Tenkey –
4 Overall 63 (D#3) Overall 21 Tenkey 0 80 (G#4) Tenkey 0
5 Song 64 (E3) Song 22 Tenkey + 81 (A4) Tenkey +
6 Voice 65 (F3) Voice 23 Acmp ON/OFF 82 (A#4) Accomp
7 Style 66 (F#3) Style 24 Synchro start 83 (B4) Sync Str
8 Grand piano 67 (G3) GrandPia 25 Start/Stop 84 (C5) Str/Stp
9 Metronome ON/OFF 68 (G#3) Metro 26 Intro/Ending 85 (C#5) Int/End
10 DJ 69 (A3) DJ 27 Main A/B 86 (D5) Main AB
11 Tenkey 1 70 (A#3) Tenkey 1 28 Tempo 87 (D#5) Tempo
12 Tenkey 2 71 (B3) Tenkey 2 29 Demo 88 (E5) Demo
13 Tenkey 3 72 (C4) Tenkey 3 30 Pat 1 89 (F5) Pad 1
14 Tenkey 4 73 (C#4) Tenkey 4 31 Pat 2 90 (F#5) Pad 2
15 Tenkey 5 74 (D4) Tenkey 5 32 Pat 3 91 (G5) Pad 3
16 Tenkey 6 75 (D#4) Tenkey 6 33 Pat 4 92 (G#5) Pad 4
17 Tenkey 7 76 (E4) Tenkey 7
16

PSR-170
■ MIDI IMPLEMENTATION CHART

YAMAHA [ PSR-170 ] Date:26-JAN-2001
Model PSR-170 MIDI Implementation Chart Version : 1.0
Transmitted Recognized Remarks

Function...
Basic Default 1 - 7,10 1 - 7,10
Channel Changed x x
Default 3 3
Mode Messages x x
Altered ************** x
Note 0 - 127 0 - 127

Number : True voice ************** 0 - 127
Velocity Note ON o 9nH,v=1-127 *1 o 9nH,v=1-127

Note OFF x 9nH,v=0 x 9nH,v=0 or 8nH
After Key's x x
Touch Ch's x x
Pitch Bend x x
0,32 o *2 o *2 Bank Select LSB,MSB

7 o o Volume
10 o o Pan
6,38 x x Data Entry
Control 64 o o Sustain
71-74 x x
Change 84 o o Portamento Cntrl
91,93,94 x x
96-97 x x RPN Inc,Dec
98,99 x x NRPN LSB,MSB
100-101 x x RPN LSB,MSB
Prog o 0 - 127 *3 o 0 - 127 *3

Change : True # ************** *3
System Exclusive o *4 o *4
: Song Pos. x x
Common : Song Sel. x x
: Tune x x
System : Clock x x
Real Time: Commands x x
Aux :All Sound OFF x x
:Reset All Cntrls x x
:Local ON/OFF x x
:All Notes OFF x x
Mes- :Active Sense o o
sages:Reset x x
Mode 1 : OMNI ON , POLY Mode 2 : OMNI ON ,MONO o : Yes
Mode 3 : OMNI OFF, POLY Mode 4 : OMNI OFF,MONO x : No
17

PARTS LIST
■ CONTENTS
OVERALL ASSEMBLY ............................................................................................................................. 2
KEYBOARD ASSEMBLY ......................................................................................................................... 4
ELECTRICAL PARTS ........................................................................................................................ 5 – 8
Notes : DESTINATION ABBREVIATIONS

A : Australian model M : South African model
B : British model O : Chinese model
C : Canadian model Q : South-east Asia model
D : German model T : Taiwan model
E : European model U : U.S.A. model
F : French model V : General export model (110V)
H : North European model W: General export model (220)
I : Indonesian model N,X : General export model
J : Japanese model Y : Export model
■ WARNING
Components having special characteristics are marked Z and must be replaced with parts having speci-
fication equal to those originally installed.
The numbers “QTY” show quantities for each unit.

The parts with “--” in “PART NO.” are not available as spare parts.
This mark “ } ” in the REMARKS column means these parts are interchangeable.
The second letter of the shaded ( ) part number is O, not zero.
The second letter of the shaded ( ) part number is I, not one.

PSR-170
■ OVERALL ASSEMBLY
210 1/2
130 190 Music Rest
240 240
210 2/2
240
20
160
90 300 240
200 170
240
240
240
180
270 80
60 70
30 20
110 Lower Case Assembly
50 40
10
270 100 LCD Unit
L20
C120
240 L30
L110
L40
L120
C10
Keyboard Assembly L120

L40
(See page 4.)
L60
C100 L50
C110
150
C90
150
C90
C40
C30
C80
140 C140
C140 C130 C100

C50 120b
C140
C140 C20 120a
C70
C70
C60 260
120
250
Battery Cover Assembly
2
PSR-170
REF NO. PART NO. DESCRIPTION REMARKS QTY RANK

-- OVERALL ASSEMBLY PSR-170 (V702380)
* 10 V7024000 Upper Case
* 20 XZ871A00 Speaker 12.0cm 4 ohm 3W 2
* 30 V7031700 Panel Switch 3 DOME BLACK SONG,VOICE,STYLE
* 40 V7202300 Panel Switch 12 DOME WHITE 0-9,OFF/-,ON/+
* 50 V7032100 Panel Switch 5 DOME YELLOW/BLACK DEMO,MULTI PAD 1-4
* 60 V7032200 Panel Switch 6 DOME BLACK ACMP ON/OFF,SYNC START,
START/STOP,INTRO/ENDING,
MAIN/AUTO FILL,TEMPO/TAP
* 70 V 7 0 3 2 3 0 0 Panel Switch 1 DOME BLACK OVERALL
* 80 V 7 0 3 2 4 0 0 Panel Switch 3 DOME BLACK/YELLOW METRONOME,PORTABLE GRAND,
DJ
* 90 V7032500 Panel Switch 3 DOME WHITE/YELLOW Dict.,LESSON L,LESSON R
100 -- LCD Unit M (V709880)
110 -- Lower Case Assembly (V702430)
* 120 V7042300 Battery Cover Assembly BLACK
120a -- Battery Cushion WHITE (V710060) 3
120b -- Nonworen Fabric Cloth 10X70X0.5 (V781030) 2
130 VU432400 Knob BLACK MASTER VOLUME 01
140 -- Label FE (V709870)
150 VA126100 Adhesive Tape 12X50 2 03
160 VF073800 Slider LC 01
170 BB005650 Brush YCUT-MEH 02
180 VA010200 Grease G-902, 1kg 40
190 VV490600 Knob BLACK STANDBY/ON 03
* 200 V7083700 Circuit Board VR
* 210 V7083600 Circuit Board PN-AM
240 EP600250 Bind Head Tapping Screw-B 3.0X8 MFZN2Y 27 01
250 VE683000 Bind Head Tapping Screw-B 3.0X12 MFZN2Y 7 01
* 260 V7213700 Bind Head Tapping Screw-B 3.0X30 MFZN2Y 5
300 -- Adhesive Tape 12X90 (V591240)
-- LCD Unit M (V709880)

L20 V5339000 LCD Panel TYPE-A 01
* L30 V6968000 LCD TTR5297DPRDCN-C3
L40 V3755900 Rubber Connector SS-105L  2 01

L40 V5415400 Rubber Connector SS-105L  2
L50 EP600280 Bind Head Tapping Screw-P 3.0X8 MFZN2Y 8 01
* L60 V6925200 Circuit Board DM-LCD
* L110 V7172200 LCD Holder A
L120 VA119300 Adhesive Tape 12x25 2 01
-- Lower Case Assembly (V702430)

C10 -- Keyboard Assembly 16N C61 P1M (V709960)
* C20 V6997500 Lower Case
C30 VI104400 Holder CH 3
C40 EP600250 Bind Head Tapping Screw-B 3.0X8 MFZN2Y 6 01
* C50 V7060500 Spring Terminal (+)
* C60 V7060700 Spring Terminal (-)
* C70 V7060200 Spring Terminal 5
C80 CB043750 Foot T1.6 BLACK 5 01
C90 -- Dust Proof Cloth (V720600) 6
C100 -- Cushion 360X15X1.0 PE (V642100) 2
C110 -- Cushion 885X15X1.0 PE (V642110)
C120 -- Connector Assembly 17P (V718700)
C130 -- Connector Assembly XH 2P (V718670)
C140 VA119300 Adhesive Tape 12X25 8 01
ACCESSORIES
V 2 1 1 5 0 0 0 Music Rest 06
VY944300 AC Adapter PA-32 CH O 10
* V 7 1 9 9 2 0 0 Chinese Guide Sheet O
: New Parts RANK: Japan only
3
PSR-170
■ KEYBOARD ASSEMBLY
110
100
110
40
50
M20
90
M30 10a
10
50
100
70
90
60
10b 110
80
M10
120
M40
MK Circuit Board Assembly
30
80
Lower Case

-- KEYBOARD ASSEMBLY 16N C61 P1M PSR-170 (V709960)
10 V34107A0 White Keys 16N CEGBDFA 5
10a -- White Keys 16N CEGB (V341260) 5
10b -- White Keys 16N DFA (V341270) 5
* 30 V4760300 White Key 16N C
40 VZ271700 Black Keys 16N 5 06
50 VZ271800 Rubber Contact 16N-1M OCT 1M 5 05
60 VZ271900 Rubber Contact 16N-1M C' 1M 04
70 VZ303000 Felt L 16N 02
* 80 V7100100 Rubber Support 16N L832
100 VZ313100 Bind Head Tapping Screw-P SP 3.0X12 MFZNBL 13 01
110 VT069800 Bind Head Tapping Screw-P 3.0X20 MFZN2 21 01
120 -- MK Circuit Board Assembly 16N1M C61 P1 (V718920)
-- MK Circuit Board Assembly 16N1M C61 P1 (V718920)

M10 VZ272400 Circuit Board MK-H 16N-1M 09
* M20 V7189900 Circuit Board MK-L 16N-1M C61 P1
M30 -- Connector Assembly MK 16N-1M-C61 (V719030)
M40 VZ302900 Felt U 16N 02
4
PSR-170
■ ELECTRICAL PARTS

ELECTRICAL PARTS PSR-170
* V6925200 Circuit Board DM-LCD (XZ643B0)
VZ272400 Circuit Board MK-H 16N-1M (XT701A0) 09
* V7189900 Circuit Board MK-L 16N-1M C61 P1 (XZ850C0)
* V7083600 Circuit Board PN-AM (XZ644C0)
* V7083700 Circuit Board VR (XZ644B0)
* V6925200 Circuit Board DM-LCD (XZ643B0)

C0001 US062470 Ceramic Capacitor-SL(chip) 470P 50V J 01
-0006 US062470 Ceramic Capacitor-SL(chip) 470P 50V J 01
C0007 US135100 Ceramic Capacitor-F (chip) 0.1000 16V Z 01
C0024 US063150 Ceramic Capacitor-B (chip) 1500P 50V K 01
-0027 US063150 Ceramic Capacitor-B (chip) 1500P 50V K 01
-0030 US135100 Ceramic Capacitor-F (chip) 0.1000 16V Z 01
C0031 UF017220 Electrolytic Cap. (chip) 22 6.3V 01
C0036 UF046470 Electrolytic Cap. (chip) 4.7 25V 01
C0037 UF046470 Electrolytic Cap. (chip) 4.7 25V 01
C0038 US064100 Ceramic Capacitor-B (chip) 0.0100 50V K 01
C0040 US064100 Ceramic Capacitor-B (chip) 0.0100 50V K 01
-0061 US135100 Ceramic Capacitor-F (chip) 0.1000 16V Z 01
C0067 UR838470 Electrolytic Cap. 470.00 16.0V 01
CL001 V2905100 Ceramic Resonator 14M CST14.00MXW140  02

CL001 V3522500 Ceramic Resonator 14M EFOEX1405E38  01
CN001 VK025600 Wire Trap 52147 12P TE 01
CN002 VF728300 Wire Trap 52147 6P TE 01
CN003 VG924500 Wire Trap 52328 17P TE 02
D0001 VT332900 Diode 1SS355 TE-17 01
D0002 VT332900 Diode 1SS355 TE-17 01
IC001 XU355A00 IC YMW728-F GEW12 10
* IC002 XZ870100 IC MX23L1610MC-10 MASK ROM 16M PROGRAM
* IC003 XZ625A00 IC M62722ML SYSTEM RESET
IC004 XF291A00 IC UPC4570G2 OP AMP 03
* IC005 XZ624A00 IC MM1385ENRE REGULATOR +3.3V
IC006 XV226A00 IC S6A0069X10-Q0RJ LCD DRIVER 05
L0001 VY657200 Chip Inductance 600 BK1608HM601  01

L0001 V3063400 Chip Inductance BLM11B601S 1608  01
L0002 VY657200 Chip Inductance 600 BK1608HM601  01

L0002 V3063400 Chip Inductance BLM11B601S 1608  01
L0003 RD355100 Carbon Resistor (chip) 100 63M J 01
-0008 RD355100 Carbon Resistor (chip) 100 63M J 01
R0001 RD357470 Carbon Resistor (chip) 47K 63M J 01
-0006 RD357470 Carbon Resistor (chip) 47K 63M J 01
R0007 VY657200 Chip Inductance 600 BK1608HM601  01

-0015 VY657200 Chip Inductance 600 BK1608HM601  01

R0007 V3063400 Chip Inductance BLM11B601S 1608  01
5
PSR-170

-0015 V3063400 Chip Inductance BLM11B601S 1608  01
R0016 RD356220 Carbon Resistor (chip) 2.2K 63M J 01
-0021 RD356220 Carbon Resistor (chip) 2.2K 63M J 01
R0023 RD354680 Carbon Resistor (chip) 68 63M J 01
R0029 RD359100 Carbon Resistor (chip) 1.0M 63M J 01
-0075 RD354470 Carbon Resistor (chip) 47 63M J 01

R0076 V3063400 Chip Inductance BLM11B601S 1608  01

R0077 V3063400 Chip Inductance BLM11B601S 1608  01
TH001 VR346900 Thermistor ERTD2FGJ801S 800 03
TR001 VV556400 Transistor 2SC2412K Q,R,S 01
TR002 VV556400 Transistor 2SC2412K Q,R,S 01
VZ272400 Circuit Board MK-H 16N-1M (XT701A0) 09

VB941200 Diode 1SS133,1SS176 01
VK025500 Wire Trap 52147 11P TE 01
* V7189900 Circuit Board MK-L 16N-1M C61 P1 (XZ850A0)

VB941200 Diode 1SS133,1SS176  01

VV437800 Diode 1N4148(DO-34)  01
VK025500 Wire Trap 52147 11P TE 01
VG924500 Wire Trap 52328 17P TE 02
* V7083600 Circuit Board PN-AM (XZ644C0)

* V7083700 Circuit Board VR (XZ644C0)
EP600190 Bind Head Tapping Screw-B 3.0X8 MFZN2BL 2 01
-- Jumper Wire 0.55 (VA07890)
C0101 VE327200 Monolithic Mylar Capacitor 1.0 50V J  02

C0101 VU838100 Monolithic Mylar Capacitor 1.0000 50V J 

C0102 VE327200 Monolithic Mylar Capacitor 1.0 50V J  02
C0102 VU838100 Monolithic Mylar Capacitor 1.0000 50V J 

C0104 VE326600 Monolithic Mylar Capacitor 0.33 50V J  01
C0104 VR169000 Monolithic Mylar Capacitor ECQ-V1H334JL3  01
C0106 VE326600 Monolithic Mylar Capacitor 0.33 50V J  01

-0109 UR837470 Electrolytic Cap. 47.00 16.0V 01
C0111 VC694800 Semiconductive Cera. Cap. 0.1000 25V Z 01
C0113 VE326200 Monolithic Mylar Capacitor 0.15 50V J 

6
PSR-170

C0114 VE326200 Monolithic Mylar Capacitor 0.15 50V J 

C0115 UR839100 Electrolytic Cap. 1000 16.0V 01
C0116 UR839100 Electrolytic Cap. 1000 16.0V 01
C0201 FG644100 Ceramic Capacitor-F 0.0100 50V Z 01
CN101 LB918020 Base Post Connector XH 2P TE 01
CN102 VI878600 Cable Holder 51048 8P TE 01
Z D0101 VL723600 Diode 20E1-FC4  01

Z D0101 VV731400 Diode 2A02M  01

Z D0101 VY717100 Diode LT2A02-E  01
D0201 VB941200 Diode 1SS133,1SS176 01
Z * FZ101 V6979300 Fuse 3.00A J
HS101 -- Heat Sink (V561400)
IC101 XV771A00 IC BA5417 POWER AMP. 5W 2CH 03
IC201 VG181900 Photo Coupler PC-900V 03
Z JK101 LB302260 Connector HEC0470-01-630 DC IN 12V 02
JK102 LB101870 Phone Jack YKB21-5006 PHONES 03
JK201 VC687500 Phone Jack YKB21-5014 BLACK SUSTAIN 01
JK202 VJ107200 DIN Connector 5P YKF51-5050 MIDI OUT 01
JK203 VJ107200 DIN Connector 5P YKF51-5050 MIDI IN 01
L0101 VB835000 Coil FL5R200QNT 20uH 01
-0205 VB835000 Coil FL5R200QNT 20uH 01
R0101 HF757150 Carbon Resistor 15.0K 1/4 J 01
R0107 HF755470 Carbon Resistor 470.0 1/4 J 01
R0115 VU317000 Metal Oxide Film Resistor 0.1 1W J 01
R0116 VU317000 Metal Oxide Film Resistor 0.1 1W J 01
-0204 HF755220 Carbon Resistor 220.0 1/4 J 01
TR101 VT459200 Transistor 2SB1326 Q,R 01
TR102 IC174070 Transistor 2SC1740S R,S 01
TR103 VS883400 Transistor 2SD2394 E,F 02
VR101 VZ048400 Rotary Variable Resistor A10.0K XV0141GPVN2 MASTWER VOLUME 02
WH102 -- Connector Assembly AM 8P-100 (V719700)
WH103 -- Connector Assembly PN2 9P-270 (V719710)
WH104 -- Connector Assembly SP 2P-140 (V719660)
7
PSR-170

WH105 -- Connector Assembly VR 5P-90 (V719680)
WH201 -- Connector Assembly MIDI 6P-110 (V719690)
WH203 -- Connector Assembly PN1 12P-110 (V719720)
WH204 -- Connector Assembly SP 2P-140 (V719660)
ZD101 VG437700 Zener Diode MTZ J 5.6B 5.6V 01
* XZ871A00 Speaker 12.0cm 4 ohm 3W 2
* V 6 9 6 8 0 0 0 LCD TTR5297DPRDCN-C3
8
www.freeservicemanuals.info
A B C D E F G H I J K 3/24/2019
L
PSR-170
■ PSR-170 OVERALL CIRCUIT DIAGRAM 1
DM-LCD PN-AM 2/2

MIDI IN MIDI OUT SUSTAIN
SPEAKER
LCD R
2
MK-L LCD DRIVER
PHOTO
COUPLER
MK-H
MIDI DRIVER
PN-AM 1/2
VR
POWER AMP
MASTER
VOLUME
5
GEW-12
PHONES/
OUTPUT
RESET
ROM 16M
PROGRAM STYLE WAVE
6
SPEAKER
L
STANDBY/ON
BUFFER
REGULATOR
+3.3V
REGULATOR
+5V
DC IN 12V
*1 7
BUFFER
MM1385ENRE (XZ624A00)
REGULATOR +3.3V *1: The fuse is soldered.
VIN
VOUT
CONT
GND
NOISE 8
: Mylar Capacitor
: Ceramic Capacitor WARNING
: Semiconductive Ceramic Capacitor
Components having special characteristics are marked Z and must be replaced with parts having speci- DM-LCD, PN-AM, VR : 28CC1-8819402 5
: Metal Oxide Film Resistor
fication equal to those originally installed. MK-L, MK-H : 28CC1-8819596
Note : See parts list for details of circuit board component parts.

Manual de Servicio Yamaha PSR-170

Uploaded by

Copyright:

Available Formats

Manual de Servicio Yamaha PSR-170

Uploaded by

Document Information

Original Description:

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Manual de Servicio Yamaha PSR-170

Uploaded by

Copyright:

Available Formats

www.freeservicemanuals.

WARNING : CHEMICAL CONTENT NOTICE !

Digitized in Heiloo the Netherlands Not for sale!

Display Power consumption

Setup Power supply

Panel controls Dimensions

One Touch Setting

Yamaha Education Suite

Digitized in Heiloo the Netherlands Not for sale!

q [MASTER VOLUME] dial !2 Numeric keypad, [+/ON] and [-/OFF] buttons

@1 [MIDI IN], [MIDI OUT] terminals @3 [PHONES/OUTPUT] jack

Digitized in Heiloo the Netherlands Not for sale!

JK201 JK202 JK203

PN-AM 2/2 SW SW PN-AM 1/2

Digitized in Heiloo the Netherlands Not for sale!

■ CIRCUIT BOARD LAYOUT & WIRING

VR DM-LCD LCD Unit

Speaker (L) [WH105] [WH102] [C120] [WH203] Speaker (R)

[WH104] [WH103] [WH201] [WH204]

Location Part No. Connector Assembly Destination Remarks

Digitized in Heiloo the Netherlands Not for sale!

[250] Battery Cover Assembly [260] [260] [250]

[250] [250] Lower Case Assembly [250]

[250] : Bind Head Tapping Screw-B 3.0X12 MFZN2Y (VE683000)

2. Spring Terminal 2-3. Remove the spring terminal by releasing hooks (2

BATTERY Connector BATTERY Connector

Digitized in Heiloo the Netherlands Not for sale!

3. PN-AM 1/2 Circuit Board 4. PN-AM 2/2 Circuit Board

VR PN-AM 1/2 PN-AM 2/2

[270] x 4 [240D] x 3 [240A] x 12 DM-LCD [240B] x 8 [270] x 4

[240] : Bind Head Tapping Screw-B 3.0X8 MFZN2Y (EP600250)

5. LCD Unit and DM-LCD Circuit Board 6. VR Circuit Board

7. Speaker (Time required : About 8 min.)

Digitized in Heiloo the Netherlands Not for sale!

[110A] [110A] [110A] [110A] [110A] [110B]

[110] : Bind Head Tapping Screw-P 3.0X20 MFZN2 (VT069800)

[90A] [90A] [90B]

[100A] [100A] [100A] [100B] [100B]

[90] : Bind Head Tapping Screw-B 3.0X8 MFZN2Y(EP600250)

Digitized in Heiloo the Netherlands Not for sale!

■ LSI PIN DESCRIPTION

1 PL0 I/O 51 DAC_Vdd Power supply

Digitized in Heiloo the Netherlands Not for sale!

● S6A0069X10-Q0RJ (XV226A00) LCD DRIVER DM-LCD : IC006

-DC Voltage Supply 4 -V 5 Non-Inverting

Digitized in Heiloo the Netherlands Not for sale!

■ CIRCUIT BOARDS INDEX

● DM-LCD Circuit Board

Digitized in Heiloo the Netherlands Not for sale!

● PN-AM 1/2 Circuit Board

A-B PAUSE START/ REW FF

Digitized in Heiloo the Netherlands Not for sale!

● PN-AM 2/2 Circuit Board

MULTI PAD/DJ GAME

SUSTAIN OUT MIDI IN

Digitized in Heiloo the Netherlands Not for sale!

● When the test result is NG, press the lowest (leftmost)

4. TEST PROGRAM LIST

0,32 o 2 o 2 Bank Select LSB,MSB

Prog o 0 - 127 3 o 0 - 127 3