63041_1-4_F012-A-e 26.01.

2006 15:47 Uhr Seite 1

DOUBLE FLANGED BUTTERFLY VALVE F 012-A DOUBLE FLANGED BUTTERFLY VALVE F 012-A DOUBLE FLANGED BUTTERFLY VALVE F 012-A

MATERIAL SPECIFICATION AND PARTS LIST

TECHNICAL DATA TORQUE DN Size Operating pressure
Nominal diameter: DN 50 – DN 1200 - The torque values specified [mm] [in] 3 [bar] 6 [bar] 10 [bar] 16 [bar]
Face-to-face: EN 558 Series 13 (MD) are based on liquid and
3 ISO 5752 Series 13 50 2 5 7 7 9
lubricant media.
API 609 Table 2C 65 2 1/2 7 9 15 18
BS 5155 short - Powdery (non-lubricant) media 80 3 8 10 18 24
7 NF E 29-305.1 Md x 1,3 100 4 9 18 28 37
Flange accommodation: DIN 2501 PN 6/10/16 - Dry gases/high viscous media 125 5 15 22 45 59
11
ANSI B 16.5, Class 150
13 13 Md x 1,2 150 6 36 45 110 125
MSS SP44 Class 150
AWWA C 207 - The values specified are based 200 8 59 76 140 200
1
AS 2129 Table D and E on the initial breakaway 250 10 150 180 200 240
BS 10 Table D and E torque. 300 12 200 240 280 360
11 JIS B 2211-5 K
JIS B 2212-10 K 350 14 350 540 610 700
9 2 - Dynamic torque specification
Flange Surface Design: DIN 2526, Form A-E, ANSI RF available upon request. 400 16 420 620 750 850
12 12 Top flange: EN ISO 5211 450 18 720 746 860 1500
17 Considering the dimensioning of
NF E 29-402 500 20 900 1100 2255 3690
15 actuators, please contact our en-
Marking: DIN EN 19 gineers. 600 24 1050 1200 3000 5830
16 8 18 Tightness check: DIN 3230 T3 BO, BN (Leakage Rate 1) 700 28 1560 2240 3450 8100
ISO 5208, Category 3 800 32 2070 3800 6600 11 200
API 598 Table 5
ANSI B 16-104, Class VI 900 36 2700 4900 7100 14 500
19 1000 40 4600 6780 11 500 24 400
4 Temperature range: –20 °C to + 160 °C (depending on
11 pressure, medium and material) 1200 48 7800 12 000 21 000 44 000
16 5 Operating pressure: max. 16 bar
14 10
20 Differential pressure: max. ip 16 bar Kv-VALUES
6 DN Size Opening angle a°
Vacuum: 0,2 bar absolute (depending on - The Kv-value (m3per hour) is [mm] [in] 20° 30° 40° 50° 60° 70° 80° 90°
TS-Version Version with splitted shaft medium and temperature) the flow of water at a temper-
Pts. 17-20: Cover plate for valve M DN 350 TS-version (through-going shaft)
50 1,2 8 13 22 38 50 65 85
ature of 5 °C to 30 °C ( 41°F to 2
The double flanged design is suitable for high pressure loading and 86°F) at ip of 1 bar. 65 2 1/2 2 9 22 42 77 115 170 215
Pt. Bezeichnung Material Material-No. ASTM Pt. Description Material Material-No. ASTM is excellently suited for use in heavy industry, shipbuilding and 80 3 8 24 50 95 150 240 330 420
- The Kv-values specified are
1 Body 9/10 Shafts waterworks. 100 4 13 28 65 130 180 340 550 800
based on tests carried out by
Nodular Cast Iron GGG-40 0.7040 60-40-18 Stainless Steel X14CrMoS17 1.4104 430F 125 26 65 130 230 350 530 870 1010
the Delfter Hydraulics 5
Carbon Steel GS-C25 1.0619 WCB X5CrNiMo17-12-2 1.4401 316
Laboratories, the Netherlands. 150 6 35 90 200 360 640 900 1350 2100
2 Seat Hastelloy 2.4883 Hastelloy
NBR Acrylonitrile butadiene rubber Bronze CuAlNiBZ 2.0975 200 8 43 180 350 580 1000 1600 3000 4000
- Permissible velocity of flow
EPDM Ethylene propylene caoutchouc 11 O-ring FEATURES Vmax 4,5 m/s for liquids and 250 10 125 360 660 1100 1800 3100 5300 6400
CSM Chlorsulphonated polyethylene NBR Acrylonitrile butadiene rubber - Absolutely tight sealing with flow in either direction Vmax 70 m/s for gases. 300 12 200 550 1000 1600 2600 5000 7500 8500
FPM Fluorocarbon caoutchouc FPM Fluorocarbon caoutchouc 350 14 350 780 1400 2400 4000 8000 10 800 11 500
- The valve body and disc are accurately machined which results in - The throttle function is linear
VSI Silicon rubber 12 TS-disc
low operating torque and long service life and reliability. at an angle 30° to 70°. 400 16 490 1050 1800 3100 5500 11 000 12 000 14 500
3/4 Bearing bush Nodular Cast Iron GGG-40 0.7040 60-40-18
- Triple shaft bearings prevents shaft deflection and guarantees 450 18 510 1080 2040 3350 6100 11 500 14 600 20 500
Bronze RG 5 Stainless Steel G-X6CrNiMo10-20 1.4408 CF8M - Avoid cavitation!
Polyamide Aluminium Bronze CuAl10Ni 2.0975 C 95800 optimum guidance even after many years of operating service. 500 20 520 1100 2200 3500 6200 12 000 15 100 21 000
PTFE Coating Halar, Rilsan - Can be disassembled, material-specific recycling possible. For further values, please 600 24 750 1400 2800 5100 8800 14 000 22 000 29 300
5 Seal DIN 7603 Surface - Single flange mounting is possible. contact our engineers. 700 28 770 1755 3260 5980 10 600 17 100 25 300 36 000
Copper Cu Copper Quality electropolished, mirror finished 800 32 1200 2260 4550 8230 12 900 20 300 29 300 44 600
- Can be installed in any desired position.
6 Plug screw DIN 908 13 TS-shaft
- Maintenance-free 900 36 1540 2280 6030 10 500 17 600 29 200 42 150 59 000
Stainless Steel 11SMnPb30 1.0718 galv. SAE12L14 Stainless Steel X14CrMoS17 1.4104 430F
Stainless Steel G-X5CrNiMo19-11-2 1.4408 CF8M X39CrMo17-1 1.4122 - Fully repairable valve 1000 40 2200 3970 8300 14 480 24 000 37 100 60 300 81 500
7 Threaded pin DIN 915 X5CrNiMo17-12-2 1.4401 316 1200 48 5050 7900 13 800 19 700 33 500 53 300 73 050 102 650
Steel 45 H galvanized Bronze CuAlNiBZ 2.0975
Stainless Steel X5CrNiMo17-12-2 1.4401 B8M 14 Sleeve
8 Disc Stainless Steel X5CrNi18-10 1.4301 304 GENERAL APPLICATIONS
Steel St52.3 1.0570 572-50 15 O-ring - Offshore
Stainless Steel X5CrNi18-10 1.4301 304 NBR Acrylonitrile butadiene rubber - Water and wastewater technology
G-X5CrNiMo19-11-2 1.4408 CF8M FPM Fluorocarbon caoutchouc
- Shipbuilding
X2CrNiMo17-12-2 1.4404 316L 16 Retainin ring
X6CrNiMoTi17-12-2 1.4571 316Ti Stainless Steel X39CrMo17-1 1.4122
X2CrNiMoN22-5-3 1.4462 F51 17 O-ring
Hastelloy 2.4883 Hastelloy NBR Acrylonitrile butadiene rubber
Aluminium Bronze CuAl10Ni 2.0975 C95800 18 Shaft retention
Coating Halar, Rilsan Bronze RG 5
Surface 19 Cover plate
Quality electropolished, mirror finished Grey Cast Iron GG-25 0.6025 40 B
20 Screw
Steel 45 H galvanized
Stainless Steel X5CrNiMo17-12-2 B8M
Other materials upon request.
Subject to change without notice.
www.ebro-armaturen.com

F 012-A 1.4 post@ebro-armaturen.com

02.2006 1.0 LD
63041_1-4_F012-A-e 26.01.2006 15:47 Uhr Seite 2

DOUBLE FLANGED BUTTERFLY VALVE F 012-A ACTUATORS F 012-A ACTUATORS F 012-A

ØF ØF HAND LEVER PNEUMATIC DOUBLE ACTING

uG G
H1

DN Size Hand Weight DN Size Actuator Weight

[mm] [in] Lever F H L [kg] [mm] [in] Type H J K L [kg]

H2
50- 65 2-21/2 Size II 54 70 155 0,10 50-65 2-21/2 EB4 96 74 49 145 1,1 L J

∅F
80-125 3-5 Size II 65 80 195 0,15 80-125 3-5 EB5 108 88 55 174 1,7
L K
150-200 6-8 Size III 90 100 276 0,50 150 6 EB6 123 103 62 208 2,6
200 8 EB8 136 115 68 250 4,3
Optional shaft end: 250-300 10-12 EB10 155 135 79 312 6,8
double flat acc. to 350-450 14-18 EB12 182 159 94 367 12,0

H
A

H
EN ISO 5211 500 20 EB265 232 152 76 390 18,0
600-700 24-28 EB270 278 220 110 445 32,0
800-900 32-36 EB280 278 220 110 600 42,0

∅D
C

i The dimensioning of actuators refers to the following operating conditions:

Control air Pressure: 6 bar

ØD
Operating Pressure: DN 50 - DN 300 10 bar
DN 350 6 bar
DN 400 - DN 900 3 bar
Dimensioning for other conditions: upon request
B

WORM GEAR PNEUMATIC SPRING RETURN

DN Size Weight DN Size EBF Weight
[mm] [in] Gear H J K L [kg] [mm] [in] Actuator H J K L [kg]
E1
50-65 2-21/2 Size I 89 39 125 152 1,9 50-100 2-4 EB5 108 88 55 273 3,0
L J
E2 80-125 3-5 Size II 89 39 125 159 1,4 125 5 EB6 123 103 62 326 5,0
6-8 L J K
E3 150-200 Size III 129 47 200 202 2,3 150 6 EB8 136 115 68 389 7,7
F 012-A with bare shaft end according to EN ISO 5211
250 10 Size IV 129 60 200 252 2,8 200 8 EB10 155 135 79 526 14,3
300-350 12-14 Size V 158 76 250 280 6,3 250-300 10-12 EB12 182 159 94 658 25,4
Dimensions [mm] Weight [kg] (GGG-40) 400-450 16-18 Size VI 228 90 356 322 16,0 350-400 14-16 EB270 278 220 110 655 45,0

H
H
∅K
DN Size splitted TS- 500 20 Size VII 278 123 457 406 30,5 450-600 18-24 EB280 278 220 110 1020 68,0
[mm] [in] A B C Di D E1 E2 E3 F Flange G H1 H2 Shaft Shaft 550-600 22-24 Size VIII 355 154 610 466 45,0 The dimensioning of actuators refers to the following operating conditions:
50 2 126 84 210 48,5 165 15 102 108 54 F04 11 12 19 9,3 - 28-32 Size XIV 295 54 457 466 65,0 Control air Pressure: 6 bar
700-800
65 21/2 134 93 227 63,5 185 15 106 112 54 11 12 19 10,1 - Operating Pressure: DN 50 - DN 300 10 bar
F04 900 36 Size XV 294 97 457 498 104,0 DN 350 6 bar
80 3 157 104 261 78,5 200 17 108 114 65 F05 14 16 25 12,2 12,7 40 Size XVI 253 237 356 558 186,0 DN 400 - DN 900 3 bar
1000
100 4 167 115 282 98,5 229 17 121 127 65 14 16 25 16,1 16,7 Dimensioning for other conditions: upon request
F05 1200 48 Size XVII 323 292 457 647 262,0
125 5 180 127 307 123,5 254 19 134 140 65 F05 14 16 25 24,0 24,6
The dimensioning of actuators refers to an operating pressure of 10 bar.
150 6 203 150 353 148 285 19 134 140 90 F07 17 19 30 29,0 30,5
200 8 228 176 404 199 343 21 146 152 90 F07 17 19 30 39,1 40,9
250 10 266 212 478 248 406 23 159 165 125 F10 22 24 39 61,2 64,2
300 12 291 237 528 296 483 24 170 178 125 F10 22 24 39 81,4 84,2 ELECTRIC ACTUATOR SWITCH BOX SERIES MSK/NSK
350 14 332 269 601 338 533 24 182 190 150 F12 * * - 107,0 112,6
DN Size Actuator Weight MSK: Switch Box with integrated micro limit switches.
400 16 363 314 677 388 597 28 208 216 150 F12 * * - 142,0 147,8 NSK: Switch Box with integrated proximity switches.
[mm] [in] Type H J K L M [kg]
450 18 397 335 732 430,5 640 33 214 222 175 F14 * * - 183,0 188,0
50-150 2-6 E 65 233 172 80 139 119 7,0
500 20 437 405 842 494,5 710 40 223 229 210 F14/F16 * * - 233,0 240,0
200-250 8-10 E 110 251 245 125 139 134 14,0 45 115 100
550 22 456 435 891 540 750 40 219 229 210 F16 * * - 268,0 285,0
300-350 12-14 E 160 239 279 198 139 157 25,0
600 24 502 465 967 590 840 40 257 267 300 F16/F25 * * - 303,0 330,0
400-500 16-20 E 210 276 369 315 139 215 40,0
700 28 581 507 1088 680 920 41 286 292 300 F16/F25 * * - 407,0 460,0
The dimensioning of actuators refers to an operating pressure of 10 bar.

60
800 32 630 556 1186 780 1050 47 312 318 300 F25 * * - 604,0 624,0

115
900 36 696 617 1313 880 1178 47 320 330 300 F25 * * - 745,0 787,0
1000 40 771 675 1446 980 1280 47 404 410 350 F30 * * - 942,0 1090,0
1200 48 905 810 1715 1170 1510 55 460 470 350 F30 * * - - 1400,0
* according to the mounted actuator Subject to change without notice.

Other Actuators: See Documentation of the Manufacturer. Subject to change without notice. Other Actuators: See Documentation of the Manufacturer. Subject to change without notice.
63041_1-4_F012-A-e 26.01.2006 15:47 Uhr Seite 2

DOUBLE FLANGED BUTTERFLY VALVE F 012-A ACTUATORS F 012-A ACTUATORS F 012-A

ØF ØF HAND LEVER PNEUMATIC DOUBLE ACTING

uG G
H1

DN Size Hand Weight DN Size Actuator Weight

[mm] [in] Lever F H L [kg] [mm] [in] Type H J K L [kg]

H2
50- 65 2-21/2 Size II 54 70 155 0,10 50-65 2-21/2 EB4 96 74 49 145 1,1 L J

∅F
80-125 3-5 Size II 65 80 195 0,15 80-125 3-5 EB5 108 88 55 174 1,7
L K
150-200 6-8 Size III 90 100 276 0,50 150 6 EB6 123 103 62 208 2,6
200 8 EB8 136 115 68 250 4,3
Optional shaft end: 250-300 10-12 EB10 155 135 79 312 6,8
double flat acc. to 350-450 14-18 EB12 182 159 94 367 12,0

H
A

H
EN ISO 5211 500 20 EB265 232 152 76 390 18,0
600-700 24-28 EB270 278 220 110 445 32,0
800-900 32-36 EB280 278 220 110 600 42,0

∅D
C

i The dimensioning of actuators refers to the following operating conditions:

Control air Pressure: 6 bar

ØD
Operating Pressure: DN 50 - DN 300 10 bar
DN 350 6 bar
DN 400 - DN 900 3 bar
Dimensioning for other conditions: upon request
B

WORM GEAR PNEUMATIC SPRING RETURN

DN Size Weight DN Size EBF Weight
[mm] [in] Gear H J K L [kg] [mm] [in] Actuator H J K L [kg]
E1
50-65 2-21/2 Size I 89 39 125 152 1,9 50-100 2-4 EB5 108 88 55 273 3,0
L J
E2 80-125 3-5 Size II 89 39 125 159 1,4 125 5 EB6 123 103 62 326 5,0
6-8 L J K
E3 150-200 Size III 129 47 200 202 2,3 150 6 EB8 136 115 68 389 7,7
F 012-A with bare shaft end according to EN ISO 5211
250 10 Size IV 129 60 200 252 2,8 200 8 EB10 155 135 79 526 14,3
300-350 12-14 Size V 158 76 250 280 6,3 250-300 10-12 EB12 182 159 94 658 25,4
Dimensions [mm] Weight [kg] (GGG-40) 400-450 16-18 Size VI 228 90 356 322 16,0 350-400 14-16 EB270 278 220 110 655 45,0

H
H
∅K
DN Size splitted TS- 500 20 Size VII 278 123 457 406 30,5 450-600 18-24 EB280 278 220 110 1020 68,0
[mm] [in] A B C Di D E1 E2 E3 F Flange G H1 H2 Shaft Shaft 550-600 22-24 Size VIII 355 154 610 466 45,0 The dimensioning of actuators refers to the following operating conditions:
50 2 126 84 210 48,5 165 15 102 108 54 F04 11 12 19 9,3 - 28-32 Size XIV 295 54 457 466 65,0 Control air Pressure: 6 bar
700-800
65 21/2 134 93 227 63,5 185 15 106 112 54 11 12 19 10,1 - Operating Pressure: DN 50 - DN 300 10 bar
F04 900 36 Size XV 294 97 457 498 104,0 DN 350 6 bar
80 3 157 104 261 78,5 200 17 108 114 65 F05 14 16 25 12,2 12,7 40 Size XVI 253 237 356 558 186,0 DN 400 - DN 900 3 bar
1000
100 4 167 115 282 98,5 229 17 121 127 65 14 16 25 16,1 16,7 Dimensioning for other conditions: upon request
F05 1200 48 Size XVII 323 292 457 647 262,0
125 5 180 127 307 123,5 254 19 134 140 65 F05 14 16 25 24,0 24,6
The dimensioning of actuators refers to an operating pressure of 10 bar.
150 6 203 150 353 148 285 19 134 140 90 F07 17 19 30 29,0 30,5
200 8 228 176 404 199 343 21 146 152 90 F07 17 19 30 39,1 40,9
250 10 266 212 478 248 406 23 159 165 125 F10 22 24 39 61,2 64,2
300 12 291 237 528 296 483 24 170 178 125 F10 22 24 39 81,4 84,2 ELECTRIC ACTUATOR SWITCH BOX SERIES MSK/NSK
350 14 332 269 601 338 533 24 182 190 150 F12 * * - 107,0 112,6
DN Size Actuator Weight MSK: Switch Box with integrated micro limit switches.
400 16 363 314 677 388 597 28 208 216 150 F12 * * - 142,0 147,8 NSK: Switch Box with integrated proximity switches.
[mm] [in] Type H J K L M [kg]
450 18 397 335 732 430,5 640 33 214 222 175 F14 * * - 183,0 188,0
50-150 2-6 E 65 233 172 80 139 119 7,0
500 20 437 405 842 494,5 710 40 223 229 210 F14/F16 * * - 233,0 240,0
200-250 8-10 E 110 251 245 125 139 134 14,0 45 115 100
550 22 456 435 891 540 750 40 219 229 210 F16 * * - 268,0 285,0
300-350 12-14 E 160 239 279 198 139 157 25,0
600 24 502 465 967 590 840 40 257 267 300 F16/F25 * * - 303,0 330,0
400-500 16-20 E 210 276 369 315 139 215 40,0
700 28 581 507 1088 680 920 41 286 292 300 F16/F25 * * - 407,0 460,0
The dimensioning of actuators refers to an operating pressure of 10 bar.

60
800 32 630 556 1186 780 1050 47 312 318 300 F25 * * - 604,0 624,0

115
900 36 696 617 1313 880 1178 47 320 330 300 F25 * * - 745,0 787,0
1000 40 771 675 1446 980 1280 47 404 410 350 F30 * * - 942,0 1090,0
1200 48 905 810 1715 1170 1510 55 460 470 350 F30 * * - - 1400,0
* according to the mounted actuator Subject to change without notice.

Other Actuators: See Documentation of the Manufacturer. Subject to change without notice. Other Actuators: See Documentation of the Manufacturer. Subject to change without notice.
63041_1-4_F012-A-e 26.01.2006 15:47 Uhr Seite 2

DOUBLE FLANGED BUTTERFLY VALVE F 012-A ACTUATORS F 012-A ACTUATORS F 012-A

ØF ØF HAND LEVER PNEUMATIC DOUBLE ACTING

uG G
H1

DN Size Hand Weight DN Size Actuator Weight

[mm] [in] Lever F H L [kg] [mm] [in] Type H J K L [kg]

H2
50- 65 2-21/2 Size II 54 70 155 0,10 50-65 2-21/2 EB4 96 74 49 145 1,1 L J

∅F
80-125 3-5 Size II 65 80 195 0,15 80-125 3-5 EB5 108 88 55 174 1,7
L K
150-200 6-8 Size III 90 100 276 0,50 150 6 EB6 123 103 62 208 2,6
200 8 EB8 136 115 68 250 4,3
Optional shaft end: 250-300 10-12 EB10 155 135 79 312 6,8
double flat acc. to 350-450 14-18 EB12 182 159 94 367 12,0

H
A

H
EN ISO 5211 500 20 EB265 232 152 76 390 18,0
600-700 24-28 EB270 278 220 110 445 32,0
800-900 32-36 EB280 278 220 110 600 42,0

∅D
C

i The dimensioning of actuators refers to the following operating conditions:

Control air Pressure: 6 bar

ØD
Operating Pressure: DN 50 - DN 300 10 bar
DN 350 6 bar
DN 400 - DN 900 3 bar
Dimensioning for other conditions: upon request
B

WORM GEAR PNEUMATIC SPRING RETURN

DN Size Weight DN Size EBF Weight
[mm] [in] Gear H J K L [kg] [mm] [in] Actuator H J K L [kg]
E1
50-65 2-21/2 Size I 89 39 125 152 1,9 50-100 2-4 EB5 108 88 55 273 3,0
L J
E2 80-125 3-5 Size II 89 39 125 159 1,4 125 5 EB6 123 103 62 326 5,0
6-8 L J K
E3 150-200 Size III 129 47 200 202 2,3 150 6 EB8 136 115 68 389 7,7
F 012-A with bare shaft end according to EN ISO 5211
250 10 Size IV 129 60 200 252 2,8 200 8 EB10 155 135 79 526 14,3
300-350 12-14 Size V 158 76 250 280 6,3 250-300 10-12 EB12 182 159 94 658 25,4
Dimensions [mm] Weight [kg] (GGG-40) 400-450 16-18 Size VI 228 90 356 322 16,0 350-400 14-16 EB270 278 220 110 655 45,0

H
H
∅K
DN Size splitted TS- 500 20 Size VII 278 123 457 406 30,5 450-600 18-24 EB280 278 220 110 1020 68,0
[mm] [in] A B C Di D E1 E2 E3 F Flange G H1 H2 Shaft Shaft 550-600 22-24 Size VIII 355 154 610 466 45,0 The dimensioning of actuators refers to the following operating conditions:
50 2 126 84 210 48,5 165 15 102 108 54 F04 11 12 19 9,3 - 28-32 Size XIV 295 54 457 466 65,0 Control air Pressure: 6 bar
700-800
65 21/2 134 93 227 63,5 185 15 106 112 54 11 12 19 10,1 - Operating Pressure: DN 50 - DN 300 10 bar
F04 900 36 Size XV 294 97 457 498 104,0 DN 350 6 bar
80 3 157 104 261 78,5 200 17 108 114 65 F05 14 16 25 12,2 12,7 40 Size XVI 253 237 356 558 186,0 DN 400 - DN 900 3 bar
1000
100 4 167 115 282 98,5 229 17 121 127 65 14 16 25 16,1 16,7 Dimensioning for other conditions: upon request
F05 1200 48 Size XVII 323 292 457 647 262,0
125 5 180 127 307 123,5 254 19 134 140 65 F05 14 16 25 24,0 24,6
The dimensioning of actuators refers to an operating pressure of 10 bar.
150 6 203 150 353 148 285 19 134 140 90 F07 17 19 30 29,0 30,5
200 8 228 176 404 199 343 21 146 152 90 F07 17 19 30 39,1 40,9
250 10 266 212 478 248 406 23 159 165 125 F10 22 24 39 61,2 64,2
300 12 291 237 528 296 483 24 170 178 125 F10 22 24 39 81,4 84,2 ELECTRIC ACTUATOR SWITCH BOX SERIES MSK/NSK
350 14 332 269 601 338 533 24 182 190 150 F12 * * - 107,0 112,6
DN Size Actuator Weight MSK: Switch Box with integrated micro limit switches.
400 16 363 314 677 388 597 28 208 216 150 F12 * * - 142,0 147,8 NSK: Switch Box with integrated proximity switches.
[mm] [in] Type H J K L M [kg]
450 18 397 335 732 430,5 640 33 214 222 175 F14 * * - 183,0 188,0
50-150 2-6 E 65 233 172 80 139 119 7,0
500 20 437 405 842 494,5 710 40 223 229 210 F14/F16 * * - 233,0 240,0
200-250 8-10 E 110 251 245 125 139 134 14,0 45 115 100
550 22 456 435 891 540 750 40 219 229 210 F16 * * - 268,0 285,0
300-350 12-14 E 160 239 279 198 139 157 25,0
600 24 502 465 967 590 840 40 257 267 300 F16/F25 * * - 303,0 330,0
400-500 16-20 E 210 276 369 315 139 215 40,0
700 28 581 507 1088 680 920 41 286 292 300 F16/F25 * * - 407,0 460,0
The dimensioning of actuators refers to an operating pressure of 10 bar.

60
800 32 630 556 1186 780 1050 47 312 318 300 F25 * * - 604,0 624,0

115
900 36 696 617 1313 880 1178 47 320 330 300 F25 * * - 745,0 787,0
1000 40 771 675 1446 980 1280 47 404 410 350 F30 * * - 942,0 1090,0
1200 48 905 810 1715 1170 1510 55 460 470 350 F30 * * - - 1400,0
* according to the mounted actuator Subject to change without notice.

Other Actuators: See Documentation of the Manufacturer. Subject to change without notice. Other Actuators: See Documentation of the Manufacturer. Subject to change without notice.
63041_1-4_F012-A-e 26.01.2006 15:47 Uhr Seite 1

DOUBLE FLANGED BUTTERFLY VALVE F 012-A DOUBLE FLANGED BUTTERFLY VALVE F 012-A DOUBLE FLANGED BUTTERFLY VALVE F 012-A

MATERIAL SPECIFICATION AND PARTS LIST

TECHNICAL DATA TORQUE DN Size Operating pressure
Nominal diameter: DN 50 – DN 1200 - The torque values specified [mm] [in] 3 [bar] 6 [bar] 10 [bar] 16 [bar]
Face-to-face: EN 558 Series 13 (MD) are based on liquid and
3 ISO 5752 Series 13 50 2 5 7 7 9
lubricant media.
API 609 Table 2C 65 2 1/2 7 9 15 18
BS 5155 short - Powdery (non-lubricant) media 80 3 8 10 18 24
7 NF E 29-305.1 Md x 1,3 100 4 9 18 28 37
Flange accommodation: DIN 2501 PN 6/10/16 - Dry gases/high viscous media 125 5 15 22 45 59
11
ANSI B 16.5, Class 150
13 13 Md x 1,2 150 6 36 45 110 125
MSS SP44 Class 150
AWWA C 207 - The values specified are based 200 8 59 76 140 200
1
AS 2129 Table D and E on the initial breakaway 250 10 150 180 200 240
BS 10 Table D and E torque. 300 12 200 240 280 360
11 JIS B 2211-5 K
JIS B 2212-10 K 350 14 350 540 610 700
9 2 - Dynamic torque specification
Flange Surface Design: DIN 2526, Form A-E, ANSI RF available upon request. 400 16 420 620 750 850
12 12 Top flange: EN ISO 5211 450 18 720 746 860 1500
17 Considering the dimensioning of
NF E 29-402 500 20 900 1100 2255 3690
15 actuators, please contact our en-
Marking: DIN EN 19 gineers. 600 24 1050 1200 3000 5830
16 8 18 Tightness check: DIN 3230 T3 BO, BN (Leakage Rate 1) 700 28 1560 2240 3450 8100
ISO 5208, Category 3 800 32 2070 3800 6600 11 200
API 598 Table 5
ANSI B 16-104, Class VI 900 36 2700 4900 7100 14 500
19 1000 40 4600 6780 11 500 24 400
4 Temperature range: –20 °C to + 160 °C (depending on
11 pressure, medium and material) 1200 48 7800 12 000 21 000 44 000
16 5 Operating pressure: max. 16 bar
14 10
20 Differential pressure: max. ip 16 bar Kv-VALUES
6 DN Size Opening angle a°
Vacuum: 0,2 bar absolute (depending on - The Kv-value (m3per hour) is [mm] [in] 20° 30° 40° 50° 60° 70° 80° 90°
TS-Version Version with splitted shaft medium and temperature) the flow of water at a temper-
Pts. 17-20: Cover plate for valve M DN 350 TS-version (through-going shaft)
50 1,2 8 13 22 38 50 65 85
ature of 5 °C to 30 °C ( 41°F to 2
The double flanged design is suitable for high pressure loading and 86°F) at ip of 1 bar. 65 2 1/2 2 9 22 42 77 115 170 215
Pt. Bezeichnung Material Material-No. ASTM Pt. Description Material Material-No. ASTM is excellently suited for use in heavy industry, shipbuilding and 80 3 8 24 50 95 150 240 330 420
- The Kv-values specified are
1 Body 9/10 Shafts waterworks. 100 4 13 28 65 130 180 340 550 800
based on tests carried out by
Nodular Cast Iron GGG-40 0.7040 60-40-18 Stainless Steel X14CrMoS17 1.4104 430F 125 26 65 130 230 350 530 870 1010
the Delfter Hydraulics 5
Carbon Steel GS-C25 1.0619 WCB X5CrNiMo17-12-2 1.4401 316
Laboratories, the Netherlands. 150 6 35 90 200 360 640 900 1350 2100
2 Seat Hastelloy 2.4883 Hastelloy
NBR Acrylonitrile butadiene rubber Bronze CuAlNiBZ 2.0975 200 8 43 180 350 580 1000 1600 3000 4000
- Permissible velocity of flow
EPDM Ethylene propylene caoutchouc 11 O-ring FEATURES Vmax 4,5 m/s for liquids and 250 10 125 360 660 1100 1800 3100 5300 6400
CSM Chlorsulphonated polyethylene NBR Acrylonitrile butadiene rubber - Absolutely tight sealing with flow in either direction Vmax 70 m/s for gases. 300 12 200 550 1000 1600 2600 5000 7500 8500
FPM Fluorocarbon caoutchouc FPM Fluorocarbon caoutchouc 350 14 350 780 1400 2400 4000 8000 10 800 11 500
- The valve body and disc are accurately machined which results in - The throttle function is linear
VSI Silicon rubber 12 TS-disc
low operating torque and long service life and reliability. at an angle 30° to 70°. 400 16 490 1050 1800 3100 5500 11 000 12 000 14 500
3/4 Bearing bush Nodular Cast Iron GGG-40 0.7040 60-40-18
- Triple shaft bearings prevents shaft deflection and guarantees 450 18 510 1080 2040 3350 6100 11 500 14 600 20 500
Bronze RG 5 Stainless Steel G-X6CrNiMo10-20 1.4408 CF8M - Avoid cavitation!
Polyamide Aluminium Bronze CuAl10Ni 2.0975 C 95800 optimum guidance even after many years of operating service. 500 20 520 1100 2200 3500 6200 12 000 15 100 21 000
PTFE Coating Halar, Rilsan - Can be disassembled, material-specific recycling possible. For further values, please 600 24 750 1400 2800 5100 8800 14 000 22 000 29 300
5 Seal DIN 7603 Surface - Single flange mounting is possible. contact our engineers. 700 28 770 1755 3260 5980 10 600 17 100 25 300 36 000
Copper Cu Copper Quality electropolished, mirror finished 800 32 1200 2260 4550 8230 12 900 20 300 29 300 44 600
- Can be installed in any desired position.
6 Plug screw DIN 908 13 TS-shaft
- Maintenance-free 900 36 1540 2280 6030 10 500 17 600 29 200 42 150 59 000
Stainless Steel 11SMnPb30 1.0718 galv. SAE12L14 Stainless Steel X14CrMoS17 1.4104 430F
Stainless Steel G-X5CrNiMo19-11-2 1.4408 CF8M X39CrMo17-1 1.4122 - Fully repairable valve 1000 40 2200 3970 8300 14 480 24 000 37 100 60 300 81 500
7 Threaded pin DIN 915 X5CrNiMo17-12-2 1.4401 316 1200 48 5050 7900 13 800 19 700 33 500 53 300 73 050 102 650
Steel 45 H galvanized Bronze CuAlNiBZ 2.0975
Stainless Steel X5CrNiMo17-12-2 1.4401 B8M 14 Sleeve
8 Disc Stainless Steel X5CrNi18-10 1.4301 304 GENERAL APPLICATIONS
Steel St52.3 1.0570 572-50 15 O-ring - Offshore
Stainless Steel X5CrNi18-10 1.4301 304 NBR Acrylonitrile butadiene rubber - Water and wastewater technology
G-X5CrNiMo19-11-2 1.4408 CF8M FPM Fluorocarbon caoutchouc
- Shipbuilding
X2CrNiMo17-12-2 1.4404 316L 16 Retainin ring
X6CrNiMoTi17-12-2 1.4571 316Ti Stainless Steel X39CrMo17-1 1.4122
X2CrNiMoN22-5-3 1.4462 F51 17 O-ring
Hastelloy 2.4883 Hastelloy NBR Acrylonitrile butadiene rubber
Aluminium Bronze CuAl10Ni 2.0975 C95800 18 Shaft retention
Coating Halar, Rilsan Bronze RG 5
Surface 19 Cover plate
Quality electropolished, mirror finished Grey Cast Iron GG-25 0.6025 40 B
20 Screw
Steel 45 H galvanized
Stainless Steel X5CrNiMo17-12-2 B8M
Other materials upon request.
Subject to change without notice.
www.ebro-armaturen.com

F 012-A 1.4 post@ebro-armaturen.com

02.2006 1.0 LD
63041_1-4_F012-A-e 26.01.2006 15:47 Uhr Seite 1

DOUBLE FLANGED BUTTERFLY VALVE F 012-A DOUBLE FLANGED BUTTERFLY VALVE F 012-A DOUBLE FLANGED BUTTERFLY VALVE F 012-A

MATERIAL SPECIFICATION AND PARTS LIST

TECHNICAL DATA TORQUE DN Size Operating pressure
Nominal diameter: DN 50 – DN 1200 - The torque values specified [mm] [in] 3 [bar] 6 [bar] 10 [bar] 16 [bar]
Face-to-face: EN 558 Series 13 (MD) are based on liquid and
3 ISO 5752 Series 13 50 2 5 7 7 9
lubricant media.
API 609 Table 2C 65 2 1/2 7 9 15 18
BS 5155 short - Powdery (non-lubricant) media 80 3 8 10 18 24
7 NF E 29-305.1 Md x 1,3 100 4 9 18 28 37
Flange accommodation: DIN 2501 PN 6/10/16 - Dry gases/high viscous media 125 5 15 22 45 59
11
ANSI B 16.5, Class 150
13 13 Md x 1,2 150 6 36 45 110 125
MSS SP44 Class 150
AWWA C 207 - The values specified are based 200 8 59 76 140 200
1
AS 2129 Table D and E on the initial breakaway 250 10 150 180 200 240
BS 10 Table D and E torque. 300 12 200 240 280 360
11 JIS B 2211-5 K
JIS B 2212-10 K 350 14 350 540 610 700
9 2 - Dynamic torque specification
Flange Surface Design: DIN 2526, Form A-E, ANSI RF available upon request. 400 16 420 620 750 850
12 12 Top flange: EN ISO 5211 450 18 720 746 860 1500
17 Considering the dimensioning of
NF E 29-402 500 20 900 1100 2255 3690
15 actuators, please contact our en-
Marking: DIN EN 19 gineers. 600 24 1050 1200 3000 5830
16 8 18 Tightness check: DIN 3230 T3 BO, BN (Leakage Rate 1) 700 28 1560 2240 3450 8100
ISO 5208, Category 3 800 32 2070 3800 6600 11 200
API 598 Table 5
ANSI B 16-104, Class VI 900 36 2700 4900 7100 14 500
19 1000 40 4600 6780 11 500 24 400
4 Temperature range: –20 °C to + 160 °C (depending on
11 pressure, medium and material) 1200 48 7800 12 000 21 000 44 000
16 5 Operating pressure: max. 16 bar
14 10
20 Differential pressure: max. ip 16 bar Kv-VALUES
6 DN Size Opening angle a°
Vacuum: 0,2 bar absolute (depending on - The Kv-value (m3per hour) is [mm] [in] 20° 30° 40° 50° 60° 70° 80° 90°
TS-Version Version with splitted shaft medium and temperature) the flow of water at a temper-
Pts. 17-20: Cover plate for valve M DN 350 TS-version (through-going shaft)
50 1,2 8 13 22 38 50 65 85
ature of 5 °C to 30 °C ( 41°F to 2
The double flanged design is suitable for high pressure loading and 86°F) at ip of 1 bar. 65 2 1/2 2 9 22 42 77 115 170 215
Pt. Bezeichnung Material Material-No. ASTM Pt. Description Material Material-No. ASTM is excellently suited for use in heavy industry, shipbuilding and 80 3 8 24 50 95 150 240 330 420
- The Kv-values specified are
1 Body 9/10 Shafts waterworks. 100 4 13 28 65 130 180 340 550 800
based on tests carried out by
Nodular Cast Iron GGG-40 0.7040 60-40-18 Stainless Steel X14CrMoS17 1.4104 430F 125 26 65 130 230 350 530 870 1010
the Delfter Hydraulics 5
Carbon Steel GS-C25 1.0619 WCB X5CrNiMo17-12-2 1.4401 316
Laboratories, the Netherlands. 150 6 35 90 200 360 640 900 1350 2100
2 Seat Hastelloy 2.4883 Hastelloy
NBR Acrylonitrile butadiene rubber Bronze CuAlNiBZ 2.0975 200 8 43 180 350 580 1000 1600 3000 4000
- Permissible velocity of flow
EPDM Ethylene propylene caoutchouc 11 O-ring FEATURES Vmax 4,5 m/s for liquids and 250 10 125 360 660 1100 1800 3100 5300 6400
CSM Chlorsulphonated polyethylene NBR Acrylonitrile butadiene rubber - Absolutely tight sealing with flow in either direction Vmax 70 m/s for gases. 300 12 200 550 1000 1600 2600 5000 7500 8500
FPM Fluorocarbon caoutchouc FPM Fluorocarbon caoutchouc 350 14 350 780 1400 2400 4000 8000 10 800 11 500
- The valve body and disc are accurately machined which results in - The throttle function is linear
VSI Silicon rubber 12 TS-disc
low operating torque and long service life and reliability. at an angle 30° to 70°. 400 16 490 1050 1800 3100 5500 11 000 12 000 14 500
3/4 Bearing bush Nodular Cast Iron GGG-40 0.7040 60-40-18
- Triple shaft bearings prevents shaft deflection and guarantees 450 18 510 1080 2040 3350 6100 11 500 14 600 20 500
Bronze RG 5 Stainless Steel G-X6CrNiMo10-20 1.4408 CF8M - Avoid cavitation!
Polyamide Aluminium Bronze CuAl10Ni 2.0975 C 95800 optimum guidance even after many years of operating service. 500 20 520 1100 2200 3500 6200 12 000 15 100 21 000
PTFE Coating Halar, Rilsan - Can be disassembled, material-specific recycling possible. For further values, please 600 24 750 1400 2800 5100 8800 14 000 22 000 29 300
5 Seal DIN 7603 Surface - Single flange mounting is possible. contact our engineers. 700 28 770 1755 3260 5980 10 600 17 100 25 300 36 000
Copper Cu Copper Quality electropolished, mirror finished 800 32 1200 2260 4550 8230 12 900 20 300 29 300 44 600
- Can be installed in any desired position.
6 Plug screw DIN 908 13 TS-shaft
- Maintenance-free 900 36 1540 2280 6030 10 500 17 600 29 200 42 150 59 000
Stainless Steel 11SMnPb30 1.0718 galv. SAE12L14 Stainless Steel X14CrMoS17 1.4104 430F
Stainless Steel G-X5CrNiMo19-11-2 1.4408 CF8M X39CrMo17-1 1.4122 - Fully repairable valve 1000 40 2200 3970 8300 14 480 24 000 37 100 60 300 81 500
7 Threaded pin DIN 915 X5CrNiMo17-12-2 1.4401 316 1200 48 5050 7900 13 800 19 700 33 500 53 300 73 050 102 650
Steel 45 H galvanized Bronze CuAlNiBZ 2.0975
Stainless Steel X5CrNiMo17-12-2 1.4401 B8M 14 Sleeve
8 Disc Stainless Steel X5CrNi18-10 1.4301 304 GENERAL APPLICATIONS
Steel St52.3 1.0570 572-50 15 O-ring - Offshore
Stainless Steel X5CrNi18-10 1.4301 304 NBR Acrylonitrile butadiene rubber - Water and wastewater technology
G-X5CrNiMo19-11-2 1.4408 CF8M FPM Fluorocarbon caoutchouc
- Shipbuilding
X2CrNiMo17-12-2 1.4404 316L 16 Retainin ring
X6CrNiMoTi17-12-2 1.4571 316Ti Stainless Steel X39CrMo17-1 1.4122
X2CrNiMoN22-5-3 1.4462 F51 17 O-ring
Hastelloy 2.4883 Hastelloy NBR Acrylonitrile butadiene rubber
Aluminium Bronze CuAl10Ni 2.0975 C95800 18 Shaft retention
Coating Halar, Rilsan Bronze RG 5
Surface 19 Cover plate
Quality electropolished, mirror finished Grey Cast Iron GG-25 0.6025 40 B
20 Screw
Steel 45 H galvanized
Stainless Steel X5CrNiMo17-12-2 B8M
Other materials upon request.
Subject to change without notice.
www.ebro-armaturen.com

F 012-A 1.4 post@ebro-armaturen.com

02.2006 1.0 LD