63041_2-2_T212-A-e 25.01.

2006 16:08 Uhr Seite 1

www.elan.ind.br

PTFE-LINED BUTTERFLY VALVE TYP T 212-A VÁLVULA BORBOLETA REVESTIDA DE PTFE PTFE-LINED BUTTERFLY VALVE T 212-A
MODELO T 212-A
MATERIAL SPECIFICATION AND PARTS LIST
TECHNICAL DATA TORQUE
Nominal diameter: DN 350 – DN 600 - The torque values specified
4 Face-to-face: EN 558 Series 20 (MD) are based on dry media
ISO 5752 Series 20 and are measured with air at a
4 API 609 Table 1 temperature of 20 °C.
4 BS 5155, Tab. 6 Series 4
NF E 29-305.1 - The values specified are based DN [mm] 350 400 450 500 600
on the initial breakaway torque 14 16 18 20 24
6 Flange accommodation: DIN 2501 PN 10/16 Size [in]
ANSI B 16.5, Class 150 (disc disengages from seat,
MD (Nm) 720 980 1200 1500 2500
3 MSS SP44 Class 150 torque then drops).
1
5 AWWA C 207 - Dynamic torque specification
7 AS 2129 Table D and E available upon request.
BS 10 Table D and E
13 2 8 JIS B 2211-5 K Regarding the dimensioning of
JIS B 2212-10K actuators, please contact our
11 3 Flange surface design: DIN 2526 Form A-E, ANSI B 16.5 RF, FF engineers.
Top flange: EN ISO 5211
NF E 29-402
14
Marking: DIN EN 19 PRESSURE/TEMPERA-
Tightness check: DIN 3230 T3 BO (Leakage Rate 1) TURE DIAGRAM 18
15 ISO 5208, Category 3
API 598 Table 5 and for valves with silicone elastomer 16
8 ANSI B 16-104, Class VI inserts

Differential Pressure PS (bar)

7 14
16 Temperature range: –40 °C to +200 °C
12 5 (depending on operation pressure)
12
4 Operating pressure: max. 10 bar, (16 bar for spec. version)
9 17
6 Differential pressure: max. ∆ p 10 bar, (16 bar for spec. version) 10
DN 350 to 400, installation between flanges (W)

10 Vacuum: up to 1 mbar absolute

8
DN 350/400 >DN 400 (with silicon elastomer inserts)
from –10 °C to +160 °C DN 450 to 600, installation between flanges (W)
6
Double flanged PTFE-Lined butterfly valve for shut-off and control
Pt. Description Material Material-No. ASTM Pt. Description Material Material-No. ASTM services in the chemical Industry. 4 DN 350 to 600, end of line service (L)
1 Body 10 Plug screw DIN 908 only DN350-400
G-X5CrNiMo19-11-2 2
Nodular Cast Iron GGG-40.3 0.7043 A395 Stainless Steel 1.4408 CF8M
b Seat k Disc/Shaft
0
PTFE Polytetrafluorethylen PTFE PTFE St. Steel/St. Steel X2CrNiMo 22-5-3 1.4462 F 51 -40 -20 0 20 40 80 100 110 120 130 140 150 160 170 180 190 200
c Elastomer insert St/PFA-coated St 52.3 1.0570 A572-50
Silicon Silicon rubber MVQ VMQ Perfluorlkoxyl PFA PFA Temperature TS (°C)
FEATURES
EPDM Etylene propylene 1.4462/1.4462 - PTFE-lined butterfly valve for chemically toxic and highly corrosive
caoutchouc EPDM 1.4462 *
1
EPDM St - PFA media Vacuum service to 1 mbar, from –10°C up to 160°C
FPM Flourcarbon caoutchouc 12 Screw
A4-70
- Environmental protection via EBRO-Safety seal
4 DU-bearing Stainless Steel 1.4401 B8M
Steel/PTFE 13 Set screw - Splitted body design Kv-VALUES
coated Iron 9SMnPb28K 1.0718 SAE12L14 - Isolation height according to plant prescription
e Trust collar 14 Shaft Retainer - Can be installed in any desired position - The Kv-value (m3 per hour) is
Stainless Steel X5CrNiMo 17-12-2 1.4401 316 Iron St37-2 the flow of water at a tempera-
- Maintenance-free
6 Bellev.spr.washer o O-Ring ture of 5 °C to 30 °C ( 41 °F to
Stainless Steel X12CrNi177 1.4310 301 FPM Fluorcarbon caoutchouc FPM FKM - Can be disassembled, material-specific recycling possible 86 °F) at ip of 1 bar.
1 2
g O-Ring 16 Cover plate - Material conform to FDA DN Size Kv-Values (Valve fully opened)
- The Kv-values specified are
FPM Flourcarbon caoutchouc FPM FKM Iron St37-2 [mm] [in] Kv-values metal disc Kv-values PTFE-disc
based on tests carried out by
Silicon opt. 17 Screw
GENERAL APPLICATIONS the Delfter Hydraulics 350 15 13500 11500
FPM/ Stainless Steel A4-70 1.4401 B8M
- Chemically highly corrosive and toxic media Laboratories, the Netherlands. 400 16 15000 12000
PTFE-coated opt. Polytetrafluorethylen PTFE PTFE
h Chevron seal X5CrNi 18-10 1.4301 304 - Purification plants - Permissible velocity of flow 450 18 18500 14000
PTFE - Pharmaceutical Industry Vmax 4,5 m/s for liquids and 500 20 22000 16000
9 Seal Vmax 70 m/s for gases. 600 24 28000 20000
Other materials upon request. - Adhesives, Paper Industry, Fuel Transport
Stainless Steel
- Paint manufacture and processing - The throttle function is linear at
u Recommended spare parts Subject to change without notice.
an angle 30° to 70°.
Recommended for coated discs - Food Industry
w
- Transport of hazardous materials Safety seal at both shaft ends in accordance with the - Avoid cavitation!
* ) Optional: electrically conductive
1

- Wet chloric gas EBRO Twin Seal principle: For further values, please
- Conditioning of materials, e.g. galvanizing and pickling 1 Primary sealing by means of a Belleville spring washer, trans- contact our engineers.
- Processing of ore mitting prestress on the spherical segment area.
- Fuel transport and storage 2 Secondary sealing of the shaft by means of PTFE-Chevron and
O-Ring.

www.ebro-armaturen.com

T 212-A 2.2 post@ebro-armaturen.com

02.2006 1.0 LD
63041_2-2_T212-A-e 25.01.2006 16:08 Uhr Seite 2

www.elan.ind.br

PTFE-LINED BUTTERFLY VALVE TYP T 212-A ACTUATORS T 212-A ACTUATORS T 212-A

WORM GEAR PNEUMATIC DOUBLE ACTING

∅F
DN Size Weight DN Size Actuator Weight
kG [mm] [in] Gear H J K L [kg] [mm] [in] Type H J K L [kg] L J
350 14 Size V 158 76 250 280 6,3 350 14 EB 12-DW 182 159 94 367 12,0 K
H1

400 16 Size XII 192 67 300 295 10,1 400 16 EB 16 DA 232 152 76 390 18,0
450-500 18-20 Size VI 228 90 356 322 16,0 L J 450-500 18-20 EB 270 DA 278 220 110 445 32,0
600 24 Size VII 278 123 457 406 30,5 600 24 EB 280 DA 278 220 110 600 42,0

H
The dimensioning of actuators refers to a control air pressure of 6 bar. The dimensioning of actuators refers to a control air pressure of 6 bar.

H
A

∅K
∅ Di
C

∅D

Z
B

ELECTRIC ACTUATOR PNEUMATIC SPRING RETURN

DN Size Actuator Weight DN Size Actuator Weight
[mm] [in] Type H J K L M [kg] [mm] [in] Type H J K L [kg]
350-400 14-16 E 160 239 279 198 139 157 25,0 350 14 EB 270 SR 278 220 110 655 45,0
450-600 18-24 E 210 276 369 315 139 215 40,0 400-450 16-18 EB 280 SR 278 220 110 1020 68,0 L J
E K
T 212-A with bare shaft end acc. to EN ISO 5211 The dimensioning of actuators refers to a control air pressure of 6 bar. The dimensioning of actuators refers to a control air pressure of 6 bar.

H
Dimensions [mm]
DN Size Weight
[mm] [in] A B C D Di E F Flange G H1 Z [kg]
350 14 330 277 607 535 338 92 150 F12 27 29 327 68
400 16 360 305 665 580 389 102 150 F12 27 29 377 95
450 18 397 363 760 639 437 114 175 F14 36 38 423 130
500 20 437 390 827 715 490 127 175 F14 36 38 475 170
600 24 498 462 960 830 579 154 210 F16 46 48 560 270
Subject to change without notice.
Subject to change without notice.

SWITCHBOX SERIES MSK/NSK

MSK: Switchbox with integrated micro limit switches
NSK: Switchbox with integrated proximity switches
45 115 100

60
115
Other Actuators: See Documentation of the Manufacturer. Subject to change without notice.
63041_2-2_T212-A-e 25.01.2006 16:08 Uhr Seite 2

www.elan.ind.br

PTFE-LINED BUTTERFLY VALVE TYP T 212-A ACTUATORS T 212-A ACTUATORS T 212-A

WORM GEAR PNEUMATIC DOUBLE ACTING

∅F
DN Size Weight DN Size Actuator Weight
kG [mm] [in] Gear H J K L [kg] [mm] [in] Type H J K L [kg] L J
350 14 Size V 158 76 250 280 6,3 350 14 EB 12-DW 182 159 94 367 12,0 K
H1

400 16 Size XII 192 67 300 295 10,1 400 16 EB 16 DA 232 152 76 390 18,0
450-500 18-20 Size VI 228 90 356 322 16,0 L J 450-500 18-20 EB 270 DA 278 220 110 445 32,0
600 24 Size VII 278 123 457 406 30,5 600 24 EB 280 DA 278 220 110 600 42,0

H
The dimensioning of actuators refers to a control air pressure of 6 bar. The dimensioning of actuators refers to a control air pressure of 6 bar.

H
A

∅K
∅ Di
C

∅D

Z
B

ELECTRIC ACTUATOR PNEUMATIC SPRING RETURN

DN Size Actuator Weight DN Size Actuator Weight
[mm] [in] Type H J K L M [kg] [mm] [in] Type H J K L [kg]
350-400 14-16 E 160 239 279 198 139 157 25,0 350 14 EB 270 SR 278 220 110 655 45,0
450-600 18-24 E 210 276 369 315 139 215 40,0 400-450 16-18 EB 280 SR 278 220 110 1020 68,0 L J
E K
T 212-A with bare shaft end acc. to EN ISO 5211 The dimensioning of actuators refers to a control air pressure of 6 bar. The dimensioning of actuators refers to a control air pressure of 6 bar.

H
Dimensions [mm]
DN Size Weight
[mm] [in] A B C D Di E F Flange G H1 Z [kg]
350 14 330 277 607 535 338 92 150 F12 27 29 327 68
400 16 360 305 665 580 389 102 150 F12 27 29 377 95
450 18 397 363 760 639 437 114 175 F14 36 38 423 130
500 20 437 390 827 715 490 127 175 F14 36 38 475 170
600 24 498 462 960 830 579 154 210 F16 46 48 560 270
Subject to change without notice.
Subject to change without notice.

SWITCHBOX SERIES MSK/NSK

MSK: Switchbox with integrated micro limit switches
NSK: Switchbox with integrated proximity switches
45 115 100

60
115
Other Actuators: See Documentation of the Manufacturer. Subject to change without notice.
63041_2-2_T212-A-e 25.01.2006 16:08 Uhr Seite 2

www.elan.ind.br

PTFE-LINED BUTTERFLY VALVE TYP T 212-A ACTUATORS T 212-A ACTUATORS T 212-A

WORM GEAR PNEUMATIC DOUBLE ACTING

∅F
DN Size Weight DN Size Actuator Weight
kG [mm] [in] Gear H J K L [kg] [mm] [in] Type H J K L [kg] L J
350 14 Size V 158 76 250 280 6,3 350 14 EB 12-DW 182 159 94 367 12,0 K
H1

400 16 Size XII 192 67 300 295 10,1 400 16 EB 16 DA 232 152 76 390 18,0
450-500 18-20 Size VI 228 90 356 322 16,0 L J 450-500 18-20 EB 270 DA 278 220 110 445 32,0
600 24 Size VII 278 123 457 406 30,5 600 24 EB 280 DA 278 220 110 600 42,0

H
The dimensioning of actuators refers to a control air pressure of 6 bar. The dimensioning of actuators refers to a control air pressure of 6 bar.

H
A

∅K
∅ Di
C

∅D

Z
B

ELECTRIC ACTUATOR PNEUMATIC SPRING RETURN

DN Size Actuator Weight DN Size Actuator Weight
[mm] [in] Type H J K L M [kg] [mm] [in] Type H J K L [kg]
350-400 14-16 E 160 239 279 198 139 157 25,0 350 14 EB 270 SR 278 220 110 655 45,0
450-600 18-24 E 210 276 369 315 139 215 40,0 400-450 16-18 EB 280 SR 278 220 110 1020 68,0 L J
E K
T 212-A with bare shaft end acc. to EN ISO 5211 The dimensioning of actuators refers to a control air pressure of 6 bar. The dimensioning of actuators refers to a control air pressure of 6 bar.

H
Dimensions [mm]
DN Size Weight
[mm] [in] A B C D Di E F Flange G H1 Z [kg]
350 14 330 277 607 535 338 92 150 F12 27 29 327 68
400 16 360 305 665 580 389 102 150 F12 27 29 377 95
450 18 397 363 760 639 437 114 175 F14 36 38 423 130
500 20 437 390 827 715 490 127 175 F14 36 38 475 170
600 24 498 462 960 830 579 154 210 F16 46 48 560 270
Subject to change without notice.
Subject to change without notice.

SWITCHBOX SERIES MSK/NSK

MSK: Switchbox with integrated micro limit switches
NSK: Switchbox with integrated proximity switches
45 115 100

60
115
Other Actuators: See Documentation of the Manufacturer. Subject to change without notice.
63041_2-2_T212-A-e 25.01.2006 16:08 Uhr Seite 1

www.elan.ind.br

PTFE-LINED BUTTERFLY VALVE TYP T 212-A PTFE-LINED BUTTERFLY VALVE TYP T 212-A PTFE-LINED BUTTERFLY VALVE T 212-A

MATERIAL SPECIFICATION AND PARTS LIST

TECHNICAL DATA TORQUE
Nominal diameter: DN 350 – DN 600 - The torque values specified
4 Face-to-face: EN 558 Series 20 (MD) are based on dry media
ISO 5752 Series 20 and are measured with air at a
4 API 609 Table 1 temperature of 20 °C.
4 BS 5155, Tab. 6 Series 4
NF E 29-305.1 - The values specified are based DN [mm] 350 400 450 500 600
on the initial breakaway torque 14 16 18 20 24
6 Flange accommodation: DIN 2501 PN 10/16 Size [in]
ANSI B 16.5, Class 150 (disc disengages from seat,
MD (Nm) 720 980 1200 1500 2500
3 MSS SP44 Class 150 torque then drops).
1
5 AWWA C 207 - Dynamic torque specification
7 AS 2129 Table D and E available upon request.
BS 10 Table D and E
13 2 8 JIS B 2211-5 K Regarding the dimensioning of
JIS B 2212-10K actuators, please contact our
11 3 Flange surface design: DIN 2526 Form A-E, ANSI B 16.5 RF, FF engineers.
Top flange: EN ISO 5211
NF E 29-402
14
Marking: DIN EN 19 PRESSURE/TEMPERA-
Tightness check: DIN 3230 T3 BO (Leakage Rate 1) TURE DIAGRAM 18
15 ISO 5208, Category 3
API 598 Table 5 and for valves with silicone elastomer 16
8 ANSI B 16-104, Class VI inserts

Differential Pressure PS (bar)

7 14
16 Temperature range: –40 °C to +200 °C
12 5 (depending on operation pressure)
12
4 Operating pressure: max. 10 bar, (16 bar for spec. version)
9 17
6 Differential pressure: ∆
max. p 10 bar, (16 bar for spec. version) 10
DN 350 to 400, installation between flanges (W)

10 Vacuum: up to 1 mbar absolute

8
DN 350/400 >DN 400 (with silicon elastomer inserts)
from –10 °C to +160 °C DN 450 to 600, installation between flanges (W)
6
Double flanged PTFE-Lined butterfly valve for shut-off and control
Pt. Description Material Material-No. ASTM Pt. Description Material Material-No. ASTM services in the chemical Industry. 4 DN 350 to 600, end of line service (L)
1 Body 10 Plug screw DIN 908 only DN350-400
G-X5CrNiMo19-11-2 2
Nodular Cast Iron GGG-40.3 0.7043 A395 Stainless Steel 1.4408 CF8M
b Seat k Disc/Shaft
0
PTFE Polytetrafluorethylen PTFE PTFE St. Steel/St. Steel X2CrNiMo 22-5-3 1.4462 F 51 -40 -20 0 20 40 80 100 110 120 130 140 150 160 170 180 190 200
c Elastomer insert St/PFA-coated St 52.3 1.0570 A572-50
Silicon Silicon rubber MVQ VMQ Perfluorlkoxyl PFA PFA Temperature TS (°C)
FEATURES
EPDM Etylene propylene 1.4462/1.4462 - PTFE-lined butterfly valve for chemically toxic and highly corrosive
caoutchouc EPDM 1.4462 *
1
EPDM St - PFA media Vacuum service to 1 mbar, from –10°C up to 160°C
FPM Flourcarbon caoutchouc 12 Screw
A4-70
- Environmental protection via EBRO-Safety seal
4 DU-bearing Stainless Steel 1.4401 B8M
Steel/PTFE 13 Set screw - Splitted body design Kv-VALUES
coated Iron 9SMnPb28K 1.0718 SAE12L14 - Isolation height according to plant prescription
e Trust collar 14 Shaft Retainer - Can be installed in any desired position - The Kv-value (m3 per hour) is
Stainless Steel X5CrNiMo 17-12-2 1.4401 316 Iron St37-2 the flow of water at a tempera-
- Maintenance-free
6 Bellev.spr.washer o O-Ring ture of 5 °C to 30 °C ( 41 °F to
Stainless Steel X12CrNi177 1.4310 301 FPM Fluorcarbon caoutchouc FPM FKM - Can be disassembled, material-specific recycling possible 86 °F) at ip of 1 bar.
1 2
g O-Ring 16 Cover plate - Material conform to FDA DN Size Kv-Values (Valve fully opened)
- The Kv-values specified are
FPM Flourcarbon caoutchouc FPM FKM Iron St37-2 [mm] [in] Kv-values metal disc Kv-values PTFE-disc
based on tests carried out by
Silicon opt. 17 Screw
GENERAL APPLICATIONS the Delfter Hydraulics 350 15 13500 11500
FPM/ Stainless Steel A4-70 1.4401 B8M
- Chemically highly corrosive and toxic media Laboratories, the Netherlands. 400 16 15000 12000
PTFE-coated opt. Polytetrafluorethylen PTFE PTFE
h Chevron seal X5CrNi 18-10 1.4301 304 - Purification plants - Permissible velocity of flow 450 18 18500 14000
PTFE - Pharmaceutical Industry Vmax 4,5 m/s for liquids and 500 20 22000 16000
9 Seal Vmax 70 m/s for gases. 600 24 28000 20000
Other materials upon request. - Adhesives, Paper Industry, Fuel Transport
Stainless Steel
- Paint manufacture and processing - The throttle function is linear at
u Recommended spare parts Subject to change without notice.
an angle 30° to 70°.
Recommended for coated discs - Food Industry
w
- Transport of hazardous materials Safety seal at both shaft ends in accordance with the - Avoid cavitation!
* ) Optional: electrically conductive
1

- Wet chloric gas EBRO Twin Seal principle: For further values, please
- Conditioning of materials, e.g. galvanizing and pickling 1 Primary sealing by means of a Belleville spring washer, trans- contact our engineers.
- Processing of ore mitting prestress on the spherical segment area.
- Fuel transport and storage 2 Secondary sealing of the shaft by means of PTFE-Chevron and
O-Ring.

www.ebro-armaturen.com

T 212-A 2.2 post@ebro-armaturen.com

02.2006 1.0 LD
63041_2-2_T212-A-e 25.01.2006 16:08 Uhr Seite 1

www.elan.ind.br

PTFE-LINED BUTTERFLY VALVE TYP T 212-A PTFE-LINED BUTTERFLY VALVE TYP T 212-A PTFE-LINED BUTTERFLY VALVE T 212-A

MATERIAL SPECIFICATION AND PARTS LIST

TECHNICAL DATA TORQUE
Nominal diameter: DN 350 – DN 600 - The torque values specified
4 Face-to-face: EN 558 Series 20 (MD) are based on dry media
ISO 5752 Series 20 and are measured with air at a
4 API 609 Table 1 temperature of 20 °C.
4 BS 5155, Tab. 6 Series 4
NF E 29-305.1 - The values specified are based DN [mm] 350 400 450 500 600
on the initial breakaway torque 14 16 18 20 24
6 Flange accommodation: DIN 2501 PN 10/16 Size [in]
ANSI B 16.5, Class 150 (disc disengages from seat,
MD (Nm) 720 980 1200 1500 2500
3 MSS SP44 Class 150 torque then drops).
1
5 AWWA C 207 - Dynamic torque specification
7 AS 2129 Table D and E available upon request.
BS 10 Table D and E
13 2 8 JIS B 2211-5 K Regarding the dimensioning of
JIS B 2212-10K actuators, please contact our
11 3 Flange surface design: DIN 2526 Form A-E, ANSI B 16.5 RF, FF engineers.
Top flange: EN ISO 5211
NF E 29-402
14
Marking: DIN EN 19 PRESSURE/TEMPERA-
Tightness check: DIN 3230 T3 BO (Leakage Rate 1) TURE DIAGRAM 18
15 ISO 5208, Category 3
API 598 Table 5 and for valves with silicone elastomer 16
8 ANSI B 16-104, Class VI inserts

Differential Pressure PS (bar)

7 14
16 Temperature range: –40 °C to +200 °C
12 5 (depending on operation pressure)
12
4 Operating pressure: max. 10 bar, (16 bar for spec. version)
9 17
6 Differential pressure: ∆
max. p 10 bar, (16 bar for spec. version) 10
DN 350 to 400, installation between flanges (W)

10 Vacuum: up to 1 mbar absolute

8
DN 350/400 >DN 400 (with silicon elastomer inserts)
from –10 °C to +160 °C DN 450 to 600, installation between flanges (W)
6
Double flanged PTFE-Lined butterfly valve for shut-off and control
Pt. Description Material Material-No. ASTM Pt. Description Material Material-No. ASTM services in the chemical Industry. 4 DN 350 to 600, end of line service (L)
1 Body 10 Plug screw DIN 908 only DN350-400
G-X5CrNiMo19-11-2 2
Nodular Cast Iron GGG-40.3 0.7043 A395 Stainless Steel 1.4408 CF8M
b Seat k Disc/Shaft
0
PTFE Polytetrafluorethylen PTFE PTFE St. Steel/St. Steel X2CrNiMo 22-5-3 1.4462 F 51 -40 -20 0 20 40 80 100 110 120 130 140 150 160 170 180 190 200
c Elastomer insert St/PFA-coated St 52.3 1.0570 A572-50
Silicon Silicon rubber MVQ VMQ Perfluorlkoxyl PFA PFA Temperature TS (°C)
FEATURES
EPDM Etylene propylene 1.4462/1.4462 - PTFE-lined butterfly valve for chemically toxic and highly corrosive
caoutchouc EPDM 1.4462 *
1
EPDM St - PFA media Vacuum service to 1 mbar, from –10°C up to 160°C
FPM Flourcarbon caoutchouc 12 Screw
A4-70
- Environmental protection via EBRO-Safety seal
4 DU-bearing Stainless Steel 1.4401 B8M
Steel/PTFE 13 Set screw - Splitted body design Kv-VALUES
coated Iron 9SMnPb28K 1.0718 SAE12L14 - Isolation height according to plant prescription
e Trust collar 14 Shaft Retainer - Can be installed in any desired position - The Kv-value (m3 per hour) is
Stainless Steel X5CrNiMo 17-12-2 1.4401 316 Iron St37-2 the flow of water at a tempera-
- Maintenance-free
6 Bellev.spr.washer o O-Ring ture of 5 °C to 30 °C ( 41 °F to
Stainless Steel X12CrNi177 1.4310 301 FPM Fluorcarbon caoutchouc FPM FKM - Can be disassembled, material-specific recycling possible 86 °F) at ip of 1 bar.
1 2
g O-Ring 16 Cover plate - Material conform to FDA DN Size Kv-Values (Valve fully opened)
- The Kv-values specified are
FPM Flourcarbon caoutchouc FPM FKM Iron St37-2 [mm] [in] Kv-values metal disc Kv-values PTFE-disc
based on tests carried out by
Silicon opt. 17 Screw
GENERAL APPLICATIONS the Delfter Hydraulics 350 15 13500 11500
FPM/ Stainless Steel A4-70 1.4401 B8M
- Chemically highly corrosive and toxic media Laboratories, the Netherlands. 400 16 15000 12000
PTFE-coated opt. Polytetrafluorethylen PTFE PTFE
h Chevron seal X5CrNi 18-10 1.4301 304 - Purification plants - Permissible velocity of flow 450 18 18500 14000
PTFE - Pharmaceutical Industry Vmax 4,5 m/s for liquids and 500 20 22000 16000
9 Seal Vmax 70 m/s for gases. 600 24 28000 20000
Other materials upon request. - Adhesives, Paper Industry, Fuel Transport
Stainless Steel
- Paint manufacture and processing - The throttle function is linear at
u Recommended spare parts Subject to change without notice.
an angle 30° to 70°.
Recommended for coated discs - Food Industry
w
- Transport of hazardous materials Safety seal at both shaft ends in accordance with the - Avoid cavitation!
* ) Optional: electrically conductive
1

- Wet chloric gas EBRO Twin Seal principle: For further values, please
- Conditioning of materials, e.g. galvanizing and pickling 1 Primary sealing by means of a Belleville spring washer, trans- contact our engineers.
- Processing of ore mitting prestress on the spherical segment area.
- Fuel transport and storage 2 Secondary sealing of the shaft by means of PTFE-Chevron and
O-Ring.

www.ebro-armaturen.com

T 212-A 2.2 post@ebro-armaturen.com

02.2006 1.0 LD