Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 61 views

    Bend Deduction

    Uploaded by

    alung lung
    This document contains a bend deduction chart with information about bend deductions for various gauge wires bent at different angles. It lists the material thickness (MT) and inside radius (IR) for wire gauges ranging from 8 to 24 when bent at angles from 10 to 170 degrees. For each gauge and angle combination it provides the deduction amount to use when determining the new length of wire needed after bending.

    Copyright:

    © All Rights Reserved
    Download as XLS, PDF, TXT or read online from Scribd

    Bend Deduction

    Uploaded by

    alung lung
    61 views2 pages
    This document contains a bend deduction chart with information about bend deductions for various gauge wires bent at different angles. It lists the material thickness (MT) and inside radius (IR) for wire gauges ranging from 8 to 24 when bent at angles from 10 to 170 degrees. For each gauge and angle combination it provides the deduction amount to use when determining the new length of wire needed after bending.

    Copyright

    © © All Rights Reserved

    Available Formats

    XLS, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document contains a bend deduction chart with information about bend deductions for various gauge wires bent at different angles. It lists the material thickness (MT) and inside radius (IR) for wire gauges ranging from 8 to 24 when bent at angles from 10 to 170 degrees. For each gauge and angle combination it provides the deduction amount to use when determining the new length of wire needed after bending.

    Copyright:

    © All Rights Reserved
    Download as XLS, PDF, TXT or read online from Scribd
    Download as xls, pdf, or txt
    61 views2 pages

    Bend Deduction

    Uploaded by

    alung lung
    This document contains a bend deduction chart with information about bend deductions for various gauge wires bent at different angles. It lists the material thickness (MT) and inside radius (IR) for wire gauges ranging from 8 to 24 when bent at angles from 10 to 170 degrees. For each gauge and angle combination it provides the deduction amount to use when determining the new length of wire needed after bending.

    Copyright:

    © All Rights Reserved
    Download as XLS, PDF, TXT or read online from Scribd
    Download as xls, pdf, or txt
    of 2

    Bend Deduction Chart

    8 Gauge 10 Gauge 12 Gauge 14 Gauge 16 Gauge 18 Gauge 20 Gauge 22 Gauge 24 Gauge


    K factor 0.33 K factor 0.33 K factor 0.18 K factor 0.33 K factor 0.33 K factor 0.33 K factor 0.33 K factor 0.33 K factor 0.33

    MT IR MT IR MT IR MT IR MT IR MT IR MT IR MT IR MT IR

    2.000 1.000 1.000 1.300 0.105 0.118 0.075 0.105 0.060 0.092 0.048 0.066 0.036 0.020 0.030 0.020 0.024 0.020

    Angle Deduction Deduction Deduction Deduction Deduction Deduction Deduction Deduction Deduction
    10 0.2352 0.1180 0.0151 0.0088 0.0071 0.0056 0.0042 0.0035 0.0028

    15 0.3553 0.1789 0.0228 0.0134 0.0107 0.0086 0.0064 0.0053 0.0043

    20 0.4785 0.2421 0.0307 0.0181 0.0145 0.0116 0.0086 0.0072 0.0057

    25 0.6058 0.3086 0.0390 0.0231 0.0186 0.0148 0.0109 0.0091 0.0073

    30 0.7385 0.3791 0.0476 0.0284 0.0228 0.0182 0.0133 0.0111 0.0089

    35 0.8777 0.4546 0.0568 0.0341 0.0275 0.0218 0.0158 0.0132 0.0106

    40 1.0249 0.5363 0.0665 0.0403 0.0325 0.0257 0.0185 0.0155 0.0125

    45 1.1815 0.6252 0.0769 0.0470 0.0380 0.0300 0.0213 0.0179 0.0145

    50 1.3492 0.7225 0.0882 0.0544 0.0441 0.0348 0.0243 0.0205 0.0166

    55 1.5299 0.8299 0.1004 0.0626 0.0508 0.0400 0.0276 0.0233 0.0189

    60 1.7257 0.9488 0.1137 0.0717 0.0583 0.0458 0.0312 0.0263 0.0215

    65 1.9391 1.0813 0.1284 0.0819 0.0667 0.0522 0.0351 0.0297 0.0243

    70 2.1731 1.2295 0.1446 0.0933 0.0761 0.0595 0.0394 0.0334 0.0274

    75 2.4309 1.3960 0.1625 0.1061 0.0867 0.0676 0.0441 0.0375 0.0309

    80 2.7167 1.5839 0.1825 0.1205 0.0987 0.0768 0.0493 0.0420 0.0347

    85 3.0352 1.7969 0.2050 0.1370 0.1124 0.0872 0.0552 0.0471 0.0391

    90 3.3923 2.0395 0.2303 0.1557 0.1281 0.0991 0.0618 0.0529 0.0440

    95 3.7952 2.3172 0.2590 0.1772 0.1460 0.1128 0.0692 0.0594 0.0496

    100 4.2530 2.6370 0.2917 0.2020 0.1668 0.1285 0.0776 0.0668 0.0560

    105 4.7769 3.0075 0.3294 0.2308 0.1909 0.1467 0.0873 0.0753 0.0633

    110 5.3815 3.4398 0.3731 0.2643 0.2191 0.1680 0.0985 0.0852 0.0718

    115 6.0858 3.9486 0.4242 0.3039 0.2523 0.1931 0.1116 0.0967 0.0818

    120 6.9150 4.5531 0.4845 0.3509 0.2918 0.2229 0.1269 0.1103 0.0937

    125 7.9035 5.2798 0.5567 0.4075 0.3394 0.2588 0.1453 0.1265 0.1078

    130 9.0996 6.1656 0.6442 0.4765 0.3975 0.3025 0.1675 0.1462 0.1250

    135 10.5727 7.2638 0.7523 0.5621 0.4696 0.3568 0.1948 0.1705 0.1462

    140 12.4270 8.6543 0.8887 0.6705 0.5610 0.4255 0.2293 0.2012 0.1731

    145 14.8262 10.4625 1.0655 0.8116 0.6800 0.5148 0.2739 0.2409 0.2079

    150 18.0431 12.8976 1.3030 1.0017 0.8404 0.6352 0.3338 0.2942 0.2546

    155 22.5685 16.3359 1.6376 1.2701 1.0669 0.8052 0.4181 0.3693 0.3205

    160 29.3840 21.5299 2.1422 1.6757 1.4094 1.0621 0.5450 0.4825 0.4199

    165 40.7793 30.2351 2.9865 2.3557 1.9836 1.4927 0.7572 0.6718 0.5864
    Bend Deduction Chart
    170 63.6206 47.7156 4.6801 3.7212 3.1369 2.3575 1.1827 1.0515 0.9203

    You might also like