CPC LCB 110
CPC LCB 110
CPC LCB 110
Ordering Information
Applications Part # Description
• Telecommunications LCB110 6-Pin DIP (50/Tube)
• Telecom Switching LCB110S 6-Pin Surface Mount (50/Tube)
• Tip/Ring Circuits LCB110STR 6-Pin Surface Mount (1000/Reel)
• Modem Switching (Laptop, Notebook, * For other packaging options consult factory.
Pocket Size)
• Hook Switch
• Dial Pulsing Pin Configuration
• Ground Start AC/DC Configuration
• Ringing Injection
1 6
• Instrumentation + Control Load
• Multiplexers 2 5
– Control Do Not Use
• Data Acquisition 3 4
• Electronic Switching N/C Load
• I/O Subsystems
• Meters (Watt-Hour, Water, Gas) DC Only Configuration
• Medical Equipment-Patient/Equipment Isolation 1 6
• Security + Control + Load
2 5
• Aerospace – Control – Load
• Industrial Controls 3 4
N/C
Switching Characteristics
of Normally Closed Devices
Form-B
IF
ILOAD
90%
10%
toff ton
Pb RoHS
2002/95/EC
e3
DS-LCB110-R08
www.clare.com 1
LCB110
R08
2 www.clare.com
LCB110
PERFORMANCE DATA*
Typical LED Forward Voltage Drop Typical Turn-On Time Typical Turn-Off Time
(N=50, IF=5mA, TA=25ºC) (N=50, IF=5mA, IL=120mADC, TA=25ºC) (N=50, IF=5mA, IL=120mADC, TA=25ºC)
35 25 25
30
20 20
25
20 15 15
15 10 10
10
5 5
5
0 0 0
1.17 1.19 1.21 1.23 1.25 0.18 0.25 0.32 0.39 0.46 0.53 0.75 0.80 0.85 0.90 0.95 1.0 1.05
LED Forward Voltage Drop (V) Turn-On (ms) Turn-Off (ms)
Typical IF for Switch Operation Typical IF for Switch Dropout Typical On-Resistance Distribution
(N=50, IL=120mADC, TA=25ºC) (N=50, IL=120mADC, TA=25ºC) (N=50, IL=120mADC, TA=25ºC)
25 25 25
20 20 20
Device Count (N)
15 15 15
10 10 10
5 5 5
0 0 0
0.45 0.50 0.55 0.60 0.65 0.70 0.75 0.40 0.45 0.50 0.55 0.60 0.65 0.70 22.4 22.7 23.0 23.3 23.6 23.9 24.2
LED Current (mA) LED Current (mA) On-Resistance (:)
20
Device Count (N)
15
10
0
370 375 380 385 390 395
Blocking Voltage (VP)
0.25 0.6
1.6
0.5
Turn-Off (ms)
Turn-On (ms)
0.20
1.4 0.4
I F =50mA
0.15
1.2 0.3
I F =10mA 0.10
I F =5mA 0.2
1.0
0.05 0.1
0.8 0 0
-40 -20 0 20 40 60 80 100 120 0 5 10 15 20 25 30 35 40 45 50 0 5 10 15 20 25 30 35 40 45 50
Temperature (ºC) LED Forward Current (mA) LED Forward Current (mA)
*The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please
contact our application department.
R08 www.clare.com 3
LCB110
PERFORMANCE DATA*
Typical On-Resistance
vs. Temperature Typical Turn-On vs. Temperature Typical Turn-Off vs. Temperature
(IL=120mADC) (IF=5mA, IL=120mADC) (IL=120mADC)
60 0.6 2.0
1.8
50 0.5 I F =5mA
1.6
On-Resistance (:)
Turn-Off (ms)
Turn-On (ms)
40 0.4 1.4
1.2
30 0.3
1.0
AC/DC Configuration
20 0.2 0.8
I F =10mA
0.6
10 0.1
DC Configuration 0.4
0 0
-40 -20 0 20 40 60 80 100 -40 -20 0 20 40 60 80 100 -40 -20 0 20 40 60 80 100
Temperature (ºC) Temperature (ºC) Temperature (ºC)
Typical On-Resistance Typical IF for Switch Operation Typical IF for Switch Dropout
vs. Temperature vs. Temperature vs. Temperature
(IL=100mA) (IL=120mADC) (IL=120mADC)
50 3.0 3.0
45
2.5 2.5
40
35 2.0 2.0
Instantaneous
30
25 1.5 1.5
20
1.0 1.0
15
10 0.5 0.5
5
0 0 0
-40 -20 0 20 40 60 80 100 -40 -20 0 20 40 60 80 100 -40 -20 0 20 40 60 80 100
Temperature (ºC) Temperature (ºC) Temperature (ºC)
180
Load Current (mA)
390
160 50
140 385
0
120 380
100 -50
AC/DC Configuration 375
80
-100 370
60
40 -150 365
-40 -20 0 20 40 60 80 100 120 -4 -3 -2 -1 0 1 2 3 4 -40 -20 0 20 40 60 80 100
Temperature (ºC) Load Voltage (V) Temperature (ºC)
0.7
Leakage (PA)
0.030
0.6
0.025
0.5
0.020
0.4
0.015 0.3
0.010 0.2
0.005 0.1
0 0
-40 -20 0 20 40 60 80 100 10Ps 100Ps 1ms 10ms 100ms 1s 10s 100s
Temperature (ºC) Time
*The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please
contact our application department.
R08
4 www.clare.com
LCB110
Manufacturing Information
Moisture Sensitivity
All plastic encapsulated semiconductor packages are susceptible to moisture ingression. Clare classified all
of its plastic encapsulated devices for moisture sensitivity according to the latest version of the joint industry
standard, IPC/JEDEC J-STD-020, in force at the time of product evaluation. We test all of our products to
the maximum conditions set forth in the standard, and guarantee proper operation of our devices when handled
according to the limitations and information in that standard as well as to any limitations set forth in the information or
standards referenced below.
Failure to adhere to the warnings or limitations as established by the listed specifications could result in reduced
product performance, reduction of operable life, and/or reduction of overall reliability.
This product carries a Moisture Sensitivity Level (MSL) rating as shown below, and should be handled according
to the requirements of the latest version of the joint industry standard IPC/JEDEC J-STD-033.
ESD Sensitivity
This product is ESD Sensitive, and should be handled according to the industry standard JESD-625.
Reflow Profile
This product has a maximum body temperature and time rating as shown below. All other guidelines of J-STD-020
must be observed.
Board Wash
Clare recommends the use of no-clean flux formulations. However, board washing to remove flux residue is
acceptable. Since Clare employs the use of silicone coating as an optical waveguide in many of its optically isolated
products, the use of a short drying bake could be necessary if a wash is used after solder reflow processes.
Chlorine- or Fluorine-based solvents or fluxes should not be used. Cleaning methods that employ ultrasonic energy
should not be used.
Pb RoHS
2002/95/EC
e3
R08 www.clare.com 5
LCB110
MECHANICAL DIMENSIONS
LCB110
8.382 ± 0.381
7.239 TYP PCB Hole Pattern
(0.330 ± 0.015) 2.54 ± 0.127 (0.285 TYP)
(0.100 ± 0.005)
6 - 0.800 DIA.
(6 - 0.031 DIA.) 2.540 ± 0.127
9.144 ± 0.508 (0.100 ± 0.005)
6.350 ± 0.127 (0.360 ± 0.020)
(0.250 ± 0.005)
7.620 ± 0.127
(0.300 ± 0.005)
7.620 ± 0.254
(0.300 ± 0.010)
1.651 ± 0.254 0.254 ± 0.0127
(0.065 ± 0.010) (0.010 ± 0.0005) 6.350 ± 0.127 5.080 ± 0.127
(0.250 ± 0.005) (0.200 ± 0.005)
LCB110S
8.382 ± 0.381
0.635 ± 0.127 PCB Land Pattern
(0.025 ± 0.005)
(0.330 ± 0.015) 2.54 ± 0.127
(0.100 ± 0.005) 2.54
(0.10)
4.445 ± 0.254
(0.175 ± 0.010)
Dimensions
1.651 ± 0.254 mm
(0.065 ± 0.010) (inches)
R08
6 www.clare.com
LCB110
P = 12.00 A0 = 10.10
K0 = 4.90 (0.398)
(0.472)
(0.19)
K1 = 3.80 Dimensions
(0.15) User Direction of Feed mm
Embossed (inches)
Carrier
NOTES:
1. All dimensions carry tolerances of EIA Standard 481-2
Embossment 2. The tape complies with all “Notes” for constant dimensions listed on page 5 of EIA-481-2
The products described in this document are not designed, intended, authorized or warranted for use as components in systems intended for surgical implant into the body, or in other
applications intended to support or sustain life, or where malfunction of Clare’s product may result in direct physical harm, injury, or death to a person or severe property or environmental
damage. Clare, Inc. reserves the right to discontinue or make changes to its products at any time without notice.
Specification: DS-LCB110-R08
©Copyright 2011, Clare, Inc.
OptoMOS® is a registered trademark of Clare, Inc.
All rights reserved. Printed in USA.
7 8/25/2011