LCC110

Common Input OptoMOS® Relay

LCC110 Units Description

Load Voltage 350 V LCC110 is a 350V, 120mA, 35Ω 1-Form-C relay. It is ideal
Load Current 120 mA for applications focused on peak load voltage handling
Max RON 35 Ω capabilities.

Features
• Small 8 Pin DIP Package
• Low Drive Power Requirements (TTL/CMOS
Compatible)
Approvals
• No Moving Parts
• UL Recognized: File Number E76270
• High Reliability
• CSA Certified: File Number LR 43639-10
• Arc-Free With No Snubbing Circuits
• BSI Certified:
• 3750VRMS Input/Output Isolation
• BS EN 60950:1992 (BS7002:1992)
• FCC Compatible
Certificate #:7344
• VDE Compatible
• BS EN 41003:1993
• No EMI/RFI Generation
Certificate #:7344
• Machine Insertable, Wave Solderable
• Current Limiting, Surface Mount and Tape & Reel
Versions Available Ordering Information
Part # Description
LCC110 8 Pin DIP (50/Tube)
LCC110P 8 Pin Flatpack (50/Tube)
Applications
LCC110PTR 8 Pin Flatpack (1000/Reel)
• Telecommunications LCC110S 8 Pin Surface Mount (50/Tube)
• Telecom Switching LCC110STR 8 Pin Surface Mount (1000/Reel)
• Tip/Ring Circuits
• Hookswitch
• Dial Pulsing
• Ground Start Pin Configuration
• Ringer Injection
• Instrumentation
LCC110 Pinout
• Multiplexers
AC/DC Configuration
• Data Acquisition
1 8
• Electronic Switching Do Not Use
Normally Closed Pole
• I/O Subsystems + Control
2 7

• Meters (Watt-Hour, Water, Gas) – Control

3 6
Normally Open Pole
• Medical Equipment-Patient/Equipment Isolation 4 5
Do Not Use
• Security
• Aerospace
• Industrial Controls Switching Characteristics of Switching Characteristics of
Normally Open (Form A) Devices Normally Closed (Form B) Devices

10ms 10ms

CONTROL CONTROL

+
90% +90% +
90%
10%+
LOAD 10%+ +10%

TOFF TON
TON TOFF

DS-LCC110-R4 www.clare.com 1
LCC110

Absolute Maximum Ratings (@ 25˚ C)

Parameter Min Typ Max Units Absolute Maximum Ratings are stress ratings. Stresses
in excess of these ratings can cause permanent damage
Input Power Dissipation - - 1501 mW
to the device. Functional operation of the device at these
Input Control Current - - 50 mA or any other conditions beyond those indicated in the
Peak (10ms) - - 1 A operational sections of this data sheet is not implied.
Reverse Input Voltage - - 5 V Exposure of the device to the absolute maximum ratings
Total Power Dissipation - - 8002 mW for an extended period may degrade the device and effect
Isolation Voltage its reliability.
Input to Output 3750 - - VRMS
Operational Temperature -40 - +85 °C
Storage Temperature -40 - +125 °C
Soldering Temperature
DIP Package - - +260 °C
Surface Mount Package - - +220 °C
(10 Seconds Max.)
1 Derate Linearly 1.33 mw/˚C
2 Derate Linearly 6.67 mw/˚C

Electrical Characteristics

Parameter Conditions Symbol Min Typ Max Units

Output Characteristics @ 25°C
Load Voltage (Peak) - VL - - 350 V
Load Current* (Continuous)
AC/DC Configuration - IL - - 120 mA
Peak Load Current 10ms ILPK - - 350 mA
On-Resistance
AC/DC Configuration IL=120mA RON - 23 35 Ω
Off-State Leakage Current VL=350V ILEAK - - 1 µA
Switching Speeds
Turn-On IF=8mA, VL=10V TON - - 4 ms
Turn-Off IF=8mA, VL=10V TOFF - - 4 ms
Output Capacitance 50V; f=1MHz COUT - 25 - pF
Capacitance
Input to Output - 3 - pF
Input Characteristics @ 25°C
Input Control Current IL=120mA IF 8 - 50 mA
Input Dropout Current - IF 0.4 0.7 - mA
Input Voltage Drop IF=8mA VF 0.9 1.2 1.4 V
Reverse Input Voltage - VR - - 5 V
Reverse Input Current VR=5V IR - - 10 µA
Common Characteristics @ 25°C
Input to Output Capacitance - CI/O - 3 - pF
Input to Output Isolation - VI/O 3750 - - VRMS
*NOTE: If both poles operate simultaneously load current must be derated so as not to exceed the package power dissipation value.

2 www.clare.com Rev. 4
 LCC110

PERFORMANCE DATA*

LCC110 - FormA LCC110 - FormB

LCC110 Typical On-Resistance Distribution Typical On-Resistance Distribution
Typical LED Forward Voltage Drop (N=50 Ambient Temperature = 25°C) (N=50 Ambient Temperature = 25°C)
(N=50 Ambient Temperature = 25°C) (Load Current = 120mADC, IF=8mADC) (Load Current = 120mADC, IF=8mADC)
35 35 30

30 30 25
Device Count (N)

Device Count (N)

Device Count (N)

25 25
20
20 20
15
15 15
10
10 10

5 5 5

0 0 0
1.17 1.19 1.21 1.23 1.25 19.5 20.5 21.5 22.5 23.5 24.5 25.5 25.5 26.5 27.5 28.5 29.5 30.5 31.5
LED Forward Voltage Drop (V) On-Resistance (Ω) On-Resistance (Ω)

LCC110 - FormA
LCC110 - FormA LCC110 - FormB Typical IF for Switch Operation
Typical Blocking Voltage Distribution Typical Blocking Voltage Distribution (N=50 Ambient Temperature = 25°C)
(N=50 Ambient Temperature = 25°C) (N=50 Ambient Temperature = 25°C) (Load Current = 120mADC)
35 30 25

30 25 20

Device Count (N)

Device Count (N)
Device Count (N)

25
20
15
20
15
15 10
10
10
5
5 5

0 0 0
400 420 440 460 480 500 520 365 375 385 395 405 415 425 1.2 2.0 2.8 3.6 4.4 5.2
Blocking Voltage (V) Blocking Voltage (V) LED Current (mA)

LCC110 - FormB LCC110 - FormA LCC110 - FormB

Typical IF for Switch Operation Typical IF for Switch Dropout Typical IF for Switch Dropout
(N=50 Ambient Temperature = 25°C) (N=50 Ambient Temperature = 25°C) (N=50 Ambient Temperature = 25°C)
(Load Current = 120mADC) (Load Current = 120mADC) (Load Current = 120mADC)
30 25 25

25
20 20
Device Count (N)

Device Count (N)

Device Count (N)

20
15 15
15
10 10
10
5 5
5

0 0 0
1.2 2.0 2.8 3.6 4.4 5.2 1.2 2.0 2.8 3.6 4.4 5.2 1.2 2.0 2.8 3.6 4.4 5.2
LED Current (mA) LED Current (mA) LED Current (mA)

LCC110 - FormA LCC110 - FormB LCC110 - FormA

Typical Turn-On Time Typical Turn-On Time Typical Turn-Off Time
(N=50 Ambient Temperature = 25°C) (N=50 Ambient Temperature = 25°C) (N=50 Ambient Temperature = 25°C)
(Load Current = 120mADC; IF = 8mADC) (Load Current = 120mADC; IF = 8mADC) (Load Current = 120mADC; IF = 8mADC)
25 30 25

20 25 20
Device Count (N)
Device Count (N)

Device Count (N)

20
15 15
15
10 10
10
5 5
5

0 0 0
1.2 2.0 2.8 3.6 4.4 5.2 0.03 0.05 0.07 0.09 0.11 0.13 0.05 0.14 0.23 0.32 0.41 0.50
Turn-On (ms) Turn-On (ms) Turn-Off (ms)

The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact
our application department.

Rev. 4
www.clare.com 3
LCC110

PERFORMANCE DATA*

LCC110 - FormB
Typical Turn-Off Time
(N=50 Ambient Temperature = 25°C) LCC110 - FormA LCC110 - FormB
(Load Current = 120mADC; IF = 8mADC) Typical Load Current vs. Temperature Typical Load Current vs. Temperature
30 180 180

25 160 160

Load Current (mA)

Load Current (mA)
Device Count (N)

140 140
20
120 120
15
100 100
10 20mA 8mA
80 10mA 80
5 60 8mA 60

0 40 40
0.21 0.28 0.35 0.42 0.49 0.56 -40 -20 0 20 40 60 80 100 120 -40 -20 0 20 40 60 80 100 120
Turn-Off (ms) Temperature (°C) Temperature (°C)

LCC110
Typical Leakage vs. Temperature LCC110 - FormA LCC110 - FormB
(Measured across Pins 5 & 6 or 7 & 8) Typical Blocking Voltage vs. Temperature Typical Blocking Voltage vs. Temperature
0.020 420 420
0.018 415 415
Blocking Voltage (VRMS)

Blocking Voltage (VRMS)

0.016 410
410
0.014
Leakage (µA)

405
405
0.012 400
0.010 400
395
0.008 395
390
0.006
385 390
0.004
380 385
0.002
0 375 380
-40 -20 0 20 40 60 80 100 -40 -20 0 20 40 60 80 100 -40 -20 0 20 40 60 80 100
Temperature (°C) Temperature (°C) Temperature (°C)

LCC110 - FormA LCC110 - FormB LCC110 - FormA

Typical Turn-On vs. Temperature Typical Turn-On vs. Temperature Typical Turn-Off vs. Temperature
(Load Current = 120mADC) (Load Current = 120mADC) (Load Current = 120mADC)
1.4 0.25 0.40

1.2 8mA 0.35

0.20
1.0 0.30
Turn-Off (ms)
Turn-On (ms)

Turn-On (ms)

0.15 0.25
0.8
10mA 0.20
0.6 0.10 0.15
0.4
20mA 0.10
0.05 8mA
0.2 8mA 0.05
0 0 0
-40 -20 0 20 40 60 80 100 -40 -20 0 20 40 60 80 100 -40 -20 0 20 40 60 80 100
Temperature (°C) Temperature (°C) Temperature (°C)

LCC110 - FormB LCC110 LCC110 - FormA

Typical Turn-Off vs. Temperature Typical LED Forward Voltage Drop Typical Turn-On vs. LED Forward Current
(Load Current = 120mADC) vs. Temperature (Load Current = 120mADC)
1.0 1.8 1.0
LED Forward Voltage Drop (V)

0.9 8mA
0.9
0.8 1.6
0.8
0.7
Turn-Off (ms)

Turn-On (ms)

10mA
0.6 1.4 0.7
0.5 50mA 0.6
20mA
0.4 1.2 30mA 0.5
20mA
0.3 10mA 0.4
0.2 1.0 5mA
0.1 0.3
0 0.8 0.2
-40 -20 0 20 40 60 80 100 -40 -20 0 20 40 60 80 100 120 0 5 10 15 20 25 30 35 40 45 50
Temperature (°C) Temperature (°C) LED Forward Current (mA)

*The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact
our application department.

Rev. 4
4 www.clare.com
 LCC110

PERFORMANCE DATA*

LCC110 - FormB LCC110 - FormA LCC110 - FormB

Typical Turn-On vs. LED Forward Current Typical Turn-Off vs. LED Forward Current Typical Turn-Off vs. LED Forward Current
(Load Current = 120mADC) (Load Current = 120mADC) (Load Current = 120mADC)
0.075 0.25 0.40

0.074 0.20 0.35

Turn-Off (ms)
Turn-On (ms)

Turn-Off (ms)
0.073 0.15 0.30

0.072 0.10 0.25

0.071 0.05 0.20

0.070 0 0.15
0 5 10 15 20 25 30 35 40 45 50 0 5 10 15 20 25 30 35 40 45 50 0 5 10 15 20 25 30 35 40 45 50
LED Forward Current (mA) LED Forward Current (mA) LED Forward Current (mA)

LCC110 - FormA LCC110 FormB LCC110 - FormA

Typical On-Resistance vs. Temperature Typical On-Resistance vs. Temperature Typical IF for Switch Operation vs. Temperature
(Load Current = 120mADC; IF = 8mADC) (Load Current = 120mADC; IF = 8mADC) (Load Current = 120mADC)
40 60 6
35 5
50
On-Resistance (Ω)

LED Current (mA)

On-Resistance (Ω)

30
40 4
25
20 30 3
15 2
20
10
10 1
5
0 0 0
-40 -20 0 20 40 60 80 100 -40 -20 0 20 40 60 80 100 -40 -20 0 20 40 60 80 100
Temperature (°C) Temperature (°C) Temperature (°C)

LCC110 - FormB LCC110 - FormA LCC110 - FormB

Typical IF for Switch Operation vs. Temperature Typical IF for Switch Dropout vs. Temperature Typical IF for Switch Dropout vs. Temperature
(Load Current = 120mADC) (Load Current = 120mADC) (Load Current = 120mADC)
6 6 6

5 5 5
LED Current (mA)

LED Current (mA)

LED Current (mA)

4 4 4

3 3 3

2 2 2

1 1 1

0 0 0
-40 -20 0 20 40 60 80 100 -40 -20 0 20 40 60 80 100 -40 -20 0 20 40 60 80 100
Temperature (°C) Temperature (°C) Temperature (°C)

LCC110 - FormA LCC110 - FormB

Typical Load Current vs. Load Voltage Typical Load Current vs. Load Voltage LCC110
(Ambient Temperature = 25°C; IF = 8mADC) (Ambient Temperature = 25°C; IF = 8mADC) Energy Rating Curve
150 150 1.0
0.9
100 100
0.8
Load Current (mA)
Load Current (mA)

Load Current (A)

50 50 0.7
0.6
0 0 0.5
0.4
-50 -50
0.3
-100 -100 0.2
0.1
-150 -150 0
-3 -2 -1 0 1 2 3 -4 -3 -2 -1 0 1 2 3 4 10µs 100µs 1ms 10ms 100ms 1s 10s 100s
Load Voltage (V) Load Voltage (V) Time

*The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact
our application department.

Rev. 4 www.clare.com 5
LCC110

Mechanical Dimensions

8 Pin DIP Through Hole (Standard) 9.652 ± .381 PC Board Pattern

(.380 ± .015)
(Top View)
2.540 ± .127 2.540 ± .127
(.100 ± .005) 8-.800 DIA. (.100 ± .005)
7.620 ± .254 (8-.031 DIA.)
(.300 ± .010)

9.144 ± .508 7.620 ± .127

3.302 6.350 ± .127 6.350 ± .127
(.130) (.360 ± .020) (.250 ± .005) (.300 ± .005)
7.239 TYP. (.250 ± .005)
(.285)
9.144 TYP.
(.360) .457 ± .076 7.620 ± .127
(.018 ± .003) (.300 ± .005)
8.077 ± .127
(.318 ± .005 )

8 Pin DIP Surface Mount (“S” Suffix) 9.652 ± .381 PC Board Pattern
(.380 ± .015)
(Top View) 2.540 ± .127
2.540 ± .127 (.100 ± .005)
(.100 ± .005)
7.620 ± .254
(.300 ± .010)

4.445 ± .127 3.302 6.350 ± .127 9.525 ± .254 8.305 ± .127

(.175 ± .005) (.130) (.250 ± .005) (.375 ± .010) (.327 ± .005)
.635 TYP. 1.905 ± .127
(.025) .254 TYP. (.075 ± .005)
(.010)
.457 ± .076
(.018 ± .003) 1.498 ± .127
(.059 ± .005)
8.077 ± .127
(.318 ± .005)

Tape and Reel Packaging for 8 Pin Surface Mount Package

330.2 DIA. 2.007 ± .102 1.498 ± .102 3.987 ± .102

(13.00) 6.731 MAX. 1.753 ± .102 (.079 ± .004) (.059 ± .004) (.157 ± .004)
(.265) (.069 ± .004)
.406 MAX.
Top Cover (.016)
Tape Thickness
.102 MAX. 7.493 ± .102 16.002 ± .305
(.004) (.295 ± .004) 1 8 (.630 ± .012)
12.090 10.300
(.476) (.405)
4.877
(.192)

Top Cover .050R TYP. 11.989 ± .102 10.300 ± .102 1.549 ± .102
Embossed Carrier Tape (.472 ± .004) (.405 ± .004) (.061 ± .004)

User Direction of Feed

Embossment

Dimensions
mm
(inches)

6 www.clare.com Rev. 4
 LCC110

Mechanical Dimensions

8 Pin Flatpack (“P” Suffix) 9.652 ± .381 PC Board Pattern

(.380 ± .015) (Top View)
2.540 ± .127
(.100 ± .005) 2.540 ± .127
(.100 ± .005)
7.620 ± .254
2.159 TYP. (.300 ± .010)
(.085)
6.350 ± .127 9.398 ± .127
(.250 ± .005) (.370 ± .005)
2.286 MAX. .203 8.763 ± .127
(.090) .635 ± .127 (.008) (.345 ± .005)
(.025) 1.193
.457 ± .076 (.047)
(.018 ± .003)
8.077 ± .127 .787
(.318 ± .005) (.031)

Tape and Reel Packaging for 8 Pin Flatpack Package

330.2 DIA. 2.007 ± .102 1.498 ± .102 3.987 ± .102

(13.00) 6.731 MAX. 1.753 ± 0.102 (.079 ± .004) (.059 ± .004) (.157 ± .004)
(.265) (.069 ± .004)
.406 MAX.
Top Cover (.016)
Tape Thickness
.102 MAX. 7.493 ± .102 16.002 ± .305
(.004) (.295 ± .004) 1 8 (.630 ± .012)
12.090 10.287
(.476) (.405)
4.877
(.192)

Embossed Carrier Top Cover .050R TYP. 11.988 ± .102 10.287 ± .102 1.549 ± .102
Tape (.472 ± .004) (.405 ± .004) (.061 ± .004)

Embossment User Direction of Feed

Dimensions
mm
(inches)

Rev. 4 www.clare.com 7
For additional information please visit our website at: www.clare.com
Clare, Inc. makes no representations or warranties with respect to the accuracy or completeness of the contents of this publication and reserves the right to make changes to specifications and product descriptions
at any time without notice. Neither circuit patent licenses nor indemnity are expressed or implied. Except as set forth in Clare’s Standard Terms and Conditions of Sale, Clare, Inc. assumes no liability whatsoever, and
disclaims any express or implied warranty, relating to its products including, but not limited to, the implied warranty of merchantability, fitness for a particular purpose, or infringement of any intellectual property right.

The products described in this document are not designed, intended, authorized or warranted for use as components in systems intended for surgical implant into the body, or in other applications intended to sup-
port or sustain life, or where malfunction of Clare’s product may result in direct physical harm, injury, or death to a person or severe property or environmental damage. Clare, Inc. reserves the right to discontinue or
make changes to its products at any time without notice.

Specification: DS-LCC110-R4.0
©Copyright 2002, Clare, Inc.
All rights reserved. Printed in USA.
6/25/02