DELKOM GRUP

PARTS LIST YD90 PS-5400.23

INDEPENDENT ROTATION DRILL Sheet 1
(FOR DESCRIPTION OF PARTS November 1, 1987
REFER TO PAGES 3 AND 4) Cancels PS-5400.23, Sh. 1,
Dated March 10, 1980

ELB0W(j6) ( f ^ ^ g ) NUT
STEM(2)(5Cj
<48)"0" RING12) "O" RING(Î5
"@STEM
ELB0W(2)@
S ) " 0 " RING
CAP(2)@ ^44)PLUG
[T\.^ ^ t § ) HOLDER
CONNECTION ( 2 ) @ - ¿ÍB) GASKET CONNECTION© ^
2JJRUBBER
,27) PIN (4) Q
|Ô)TUBE
3I)B0LT(2)
B0LT(2)(7j)
33)WASHER(2) Í?)GL AND
43)C0VER
¡9)"0" RING
{35)BUSHING
S)GASKET
(Í2)BACKHEAD
55 ROTOR
DOWEL(ÏÏ)

BEARING® - Q (ê)CHEST
— ( 2 6 ) HOUSING
ÍO) VALVE
SHAFT@ S|)BUSHING

|7)PIN(3) LIQUIDE

CONNECTIONS- Í9)"0" RING

ê5)RUBBER

ROTOR
PLATE

WASHER (4)(33j (?)PISTON

NUT(4)(§>

PL ATE (^4}
C0VER(¿
BUSHING @
B O L T (4) (|)

GEAR@ I (CYLINDER

BUSHINGlf!)— -

PLATE@ WASHER
BUSHING@
6JLINER
BEARING^

PLATE (37
(5)SLEEVE
FITTING(74;

WASHER ( 4 ) @ ^ ^ ^
,. , jj- @PIN

|68)LINER

BOLT(2)(5S

SPRI

INGERSOLL-RANP Rock Drill Division

DRILLING EQUIPMENT Roanoke, VA 24019
SECTION A - A

Page 2, PS-5400.23, Sh. 1

When ordering spares, please give (1) the NAME o f the part as l i s t e d , (2) the PART NO. as l i s t e d and
starred on the part, and (3) the SERIAL NUMBER of the machine.
DO NOT use i l l u s t r a t i o n numbers when ordering spare parts. To save time send a l l orders f o r parts t o
the nearest branch o f f i c e or agent.
WHEN NECESSARY TO SEND ANY PART OF THIS MACHINE TO THE FACTORY, INQUIRE AT OUR NEAREST BRANCH OFFICE
FOR SPECIAL INSTRUCTIONS.

RECOMMENDED
SPARES
REF. Q
PART NAME OF PART T
CLASS
NO. NO.
Parts indented under an item Y. 1 2 3
are included with that item Min. Av. Max.

YD90 DRILL
(50765502) (CONSISTS OF FOLLOWING)
1 50788876 CYLINDER 1
2 50788926 COVER,EXHAUST 1
3 50788967 BOLT,COVER
4 50788579 WASHER,SPRING

-1 -21
5 50781012 SLEEVE.CYLINDER 1 1
6 50781020 LINER,CYLINDER 1 3

--1
7 50781038 PISTON 1 1

-11
8 50951235 CHEST,VALVE 1 1
9 50951243 GUIDE,VALVE 1 1
10 50951250 VALVE 1 1 2
11 50781046 DOWEL,VALVE CHEST 1 1 1 2
12 50788884 BACKHEAD 1 1 1 2
13 50726769 CONNECTION 1
14 50788892 CAP,CONNECTION 1

- -
15 50781566 0-RING 1 1
16 50788645 ELBOW 1

-1 -
17 50788900 GLAND,BACKHEAD 1 1
18 50781087 5ASKET,GLAND 1 2 3

-2
19 50787183 0-RING 2 3
20 50726793 TUBE,BLOWER 1 2 4
21 50781095 RUBBER,BLOWER TUBE 1
22 50789064 HOLDER,BLOWER TUBE 1

- -
23 50726785 NUT,HOSE STEM 1 1
24 50781103 STEM,HOSE 1
25 50787084 3-RING 1
26 50762483 HOUSING,ROTOR 1

-- -
27 50762491 PIN,DOWEL 7 8
28 50762509 PIN,DOWEL - 1 _ 1

-11 -11
29 50762517 PIN,DOWEL 2 1
30 50788934 30LT,COVER 4 2
31 50788942 30LT,COVER 2 1
32 50788561 4
33 50788587 nlASHER, SPRING 6

- -
34 50726801 ROTOR,DRIVE 1 1
35 50726819 BUSHING,ROTOR 2 2 2 2
36 50726835 3EARING 1 1 1 1
37 50726850 PLATE,BEARING 1
38 50726843 BUSHING,BEARING 1 1 1 1

-2-
39 50788959 ROTOR,DRIVEN 1
--2
1
40 50788975 SHAFT,ROTOR 1 1
41 50786128 BEARING 2
42 50788983 SPACER,BEARING 1
43 50762525 COVER,HOUSING 1
44 50726827 LUG,COVER
3
1
45 50726934 3ASKET.PLUG 1
46 50726777 CONNECTION 2
47 50788991 CAP,CONNECT ION 2

- -
48 50787209 D-RING,CONNECTION 2 1
49 50788595 ELBOW 2
50 50789007 STEM,HOSE 2
51 50781152 CONNECTION 1
52 50762533 LATE,ROTOR
3
1
53
54
50789015
50762541
^IN,KNOCK
END,CHUCK
1
1 - _ 1

Page 3, PS-5400.23, Sh. 1

 RECOMMENDED
SPARES
Q CLASS
REF. PART N A M E OF PART
T
NO. NO.
Parts indented under an item Y. 1 2 3
are included with that item Min. Av. Max.

55 50789023 CAP,CHUCK 1
56 50780964 SPACER,CAP 1 1 1 1
57 50726942 SPRING,CAP 1 1 2 2
58 50789031 BOLT 2 2 2 2
59 50789049 BOLT 2 2 2 2
60 50788579 WASHER,SPRING 4
61 50726884 GEAR,DRIVE 1 1 1 2
62 50726868 BUSHING,GEAR 2 2 2 2
63 50726876 'LATE 1
64 50726918 PLATE 1
65 50726892 RUBBER,DUST 1 1 1 1
66 50726900 3RIVE,CHUCK 1 1 1 1
67 50780980 LINER,CHUCK DRIVE 1 1 1 2
68 50781004 LINER,CHUCK DRIVE 1 1 1 2
69 50780972 BUSHING 1 1 1 2
70 50726959 3AW,CHUCK 1 1 2 3
71 50781129 ASSEMBLY ROD 2 2 2 4
72 50781111 WT 2 2 2 4
73 50788603 «IASHER, SPRING 2 2 4 6
74 50726926 FITTING 4
OPTIONAL EQUIPMENT
(FURNISHED ONLY
WHEN SPECIALLY ORDERED)
50792092 CHUCK AND BLOWER TUBE KIT
(REFER TO PAGE 6 FOR
ILLUSTRATION AND PARTS LIST)
50895754 CHUCK AND BLOWER TUBE KIT
(REFER TO PAGE 6 FOR
ILLUSTRATION AND PARTS LIST)
50895077 HÜFFLER ASSEMBLY (REFER TO
'AGE 5 FOR ILLUSTRATION AND
'ARTS LIST)

The YD90 D r i f t e r i s a 90 mm (3-1/2 i n . ) bore Blower Tube:

hammer d r i l l that incorporates an independently
c o n t r o l l e d , gear type, a i r powered r o t a t i o n motor The YD90 D r i f t e r uses a i r as the hole cleaning
to rotate the d r i l l steel i n place o f the conven- medium. A 13.0 mm (1/2 i n . ) O.D. x 11.0 mm (7/16
t i o n a l r i f l e bar, r i f l e nut r o t a t i o n . i n . ) 1.0. blower tube swaged down t o 10.2 mm
The d r i f t e r i s designed f o r surface d r i l l i n g (13/32 i n . ) O.D. x 8.2 mm (21/64 i n . ) I.D. carries
applications on our pneumatic operated Crawlair hole cleaning a i r from the i n l e t connection i n the
D r i l l i n g Rigs, and i s capable o f d r i l l i n g 44 mm backhead, through the center o f the d r i l l , s t r i k -
(1-3/4 i n . ) t o 64 mm (2-1/2 i n . ) diameter holes i n ing bar, steel and b i t , t o the bottom o f the hole
a l l types o f rock formations. without contacting any o f internal parts of the
drifter.
Pneumatic Rotation Motor:
Chuck Parts:
The YD90 D r i f t e r i s designed with an independ-
e n t l y - c o n t r o l l e d , pneumatic-powered, gear rotor The YD90 D r i f t e r i s designed with chuck parts to
type r o t a t i o n motor that provides continuous d r i l l accomodate a 4-splined s t r i k i n g bar w i t h 38 mm
steel r o t a t i o n - forward or reverse. (1-1/2 i n . ) shank and stem diameters.

Page 4, PS-5400.23, Sh. 1

S t r i k i n g Bars (Furnished Only When Specially Ordered):

The Y090 D r i f t e r does not include a s t r i k i n g bar as standard equipment. The s t r i k i n g bar must be
specially ordered. The following s t r i k i n g bars are available f o r use i n the YD90 D r i f t e r :

+Striking Bar S t r i k i n g Bar Specifications

*50764778 4-Spline Drive
(SB12S10A) 1-1/2 i n . (38 mm) Shank and Stem Diameters
1-1/4 i n . (32 mm) Spiral Thread
7/16 i n . (11.2 mm) Seal
For 7/16 i n . (11.2 mm) Blower Tube
*N0TE: Use 8 - d i g i t part number (50764778) when ordering the
required s t r i k i n g bar.

RECOMMENDED
SPARES
REF. PART N A M E OF PART Q CLASS
NO. NO. T
Parts indented under an item Y. 1 2 3
are included with that item Min. Av. Max.

50895077 MUFFLER ASSEMBLY

(CONSISTS OF FOLLOWING)
1 50895085 1UFFLER 1
2 50895093 50LT,MUFFLER 4
3 50855907 JASHER, PLAIN 4
4 50788439 (JASHER.SPRING 4
5 50787753 'LUG 4

Page 5, PS-5400.23, Sh. 1

 RECOMMENDED
SPARES
Q
REF. PART N A M E O F PART CLASS
T
NO. NO.
Y. 1 2 3
Parts indented under an item
are included with that item Min. Av. Max.

** 50895754 CHUCK & BLOWER TUBE KIT

(CONSISTS OF FOLLOWING)
1 50792100 TUBE,BLOWER 1 2 2 4
3 50895762 SPACER,CAP 1
4 50895770 DRIVE,CHUCK 1
6 50895788 BUSHING 1 1 2

** For 25 mil (1 i n . ) hex. x 108 mm (4-1/4 i n . ) integral-steel s t r i k i n g bar.

RECOMMENDED
SPARES
Q
REF. PART NAME O F PART CLASS
T
NO. NO.
Parts indented under an item Y. 1 2 3
are included w i t h that item Min. Av. Max.

i
* 50792092 CHUCK 4 BLOWER TUBE KIT
(CONSISTS OF FOLLOWING)
1 50792100 TUBE,BLOWER 2 2 4
2 50792118 CAP,CHUCK
3 50792126 SPACER,CAP
4 50792134 DRIVE,CHUCK
5 50792142 LINER,CHUCK DRIVE
6 50792159 BUSHING 1 2

* For 25 mm (1 i n . ) hex. x 159 mm (6-1/4 i n . ) integral-steel s t r i k i n g bar.

Page 6, PS-5400.23, Sh. 1