2 MSOP-8

PACKAGE INFORMATION

Mechanical Data Package View

 Surface Mount Package
 Case Material: Molded Plastic, UL Flammability Rating 94V-0
 Terminals: Finish - Matte Tin Plated Leads, Solderable per
MIL-STD-202, Method 208 e3
 Weight: 0.0246 grams (Approximate)
 Max Soldering Temperature +260°C for 30 secs as per JEDEC
J-STD-020

Package Outline Dimensions

MSOP-8
2x
D aaa C MSOP-8
A
Dim Min Max Typ
D
A -- 1.10 --
4x10 A1 0.05 0.15 0.10
°
A2 0.75 0.95 0.86
A3 0.29 0.49 0.39
0.25

b 0.22 0.38 0.30

Ø 0.60mmx0.038DP
Gauge Plane c 0.08 0.23 0.15
E Seating Plane D 2.90 3.10 3.00
x a
E 4.70 5.10 4.90
4x10
C ° L E1 2.90 3.10 3.00
y
E3 2.85 3.05 2.95
Detail C e -- -- 0.65
L 0.40 0.80 0.60
bbb C
1 2x a 0° 8° 4°
B
b
x -- -- 0.750
E3
ddd C A-B D y -- -- 0.750
H aaa 0.20
ccc C
A A2 bbb 0.25
Seating Plane ccc 0.10
e
A3 c ddd 0.13
A1 C E1
aaa C D All Dimensions in mm
See Detail C
2x

Suggested Pad Layout

MSOP-8
X C

Y
Value
Dimensions
(in mm)
C 0.650
X 0.450
Y1
Y 1.350
Y1 5.300

Note: The suggested land pattern dimensions have been provided for reference only, as actual pad layouts may vary depending on application.
These dimensions may be modified based on user equipment capability or fabrication criteria. A more robust pattern may be desired for
wave soldering and is calculated by adding 0.2 mm to the ‘Z’ dimension. For further information, please reference document IPC-7351A,
Naming Convention for Standard SMT Land Patterns, and for International grid details, please see document IEC, Publication 97.

Note: For high voltage applications, the appropriate industry sector guidelines should be considered with regards to creepage and clearance
distances between device Terminals and PCB tracking.

MSOP-8 Package Information 1 of 8 September 2021

Rev. 2021-09-17 www.diodes.com © Diodes Incorporated
2 MSOP-8

Minimum Packing Quantity

Quantity Tape Width Part Number Suffix
Bulk-Loose 100 n/a n/a
7” Reel 1,000 12mm TA
13” Reel 2,500 12mm -13
13” Reel 4,000 12mm TC
Note: Package quantities given are for minimum packaging quantity only, not minimum order quantity. For minimum order quantity, please contact Sales
Department.
Note: No mixed date codes or partial quantity (less than minimum packaging quantity) per packaging is allowed.
Note: In no case shall there be two or more consecutive components missing from any reel for any reason.

Device Tape Orientation

Tape Width Part Number Suffix Tape Orientation

Pin 1

-13
TA
12mm
TC

Direction of feed
Note: For part marking, refer to product datasheet.
Note: Tape and package drawings are not to scale and are shown for device tape orientation only.

Embossed Carrier Tape Specifications

K0 P P0 P2 ØD
t
E

F
W
B0

Ø D1

Direction of Feed
A0
Tape Width
Dimension Value (mm) Dimension Value (mm) Dimension Value (mm)
(W)
A0 5.32 ±0.10 D1 1.55 ±0.05 P0 4.00 ±0.10
B0 3.30 ±0.10 E 1.75 ±0.10 P2 2.00 ±0.10
K0 1.42 ±0.10 F 5.50 ±0.05 t 0.30 ±0.05
12mm
D 1.55 ±0.05 P 8.0 ±0.10 W 12.00 +0.2/-0.1
Determined by component size. The clearance between the component and the cavity must
A0 B0 K0 comply to the rotational and lateral movement requirement provided in figures in the "Maximum
Component Movement in Tape Pocket” section.

MSOP-8 Package Information 2 of 8 September 2021

Rev. 2021-09-17 www.diodes.com © Diodes Incorporated
2 MSOP-8

Embossed Carrier Tape Specifications (Continued)

MSOP-8 Package Information 3 of 8 September 2021

Rev. 2021-09-17 www.diodes.com © Diodes Incorporated
2 MSOP-8

Maximum Component Movement in Tape Pocket

Component Lateral Movement

0.5mm maximum
0.5mm maximum

Maximum Component Rotation

Top View Side View

20°

Typical Pocket Centerline

20°
Ao

Typical Component Centerline

Bo

MSOP-8 Package Information 4 of 8 September 2021

Rev. 2021-09-17 www.diodes.com © Diodes Incorporated
2 MSOP-8

Surface Mount Reel Specifications

B*

C
A D* N

Full Radius

G
[Measured at hub]
* Drive spokes optional. If used,
dimensions with asterisks apply.

A B* C D* N G T
Tape Width Reel Size
(mm) (mm) (mm) (mm) (mm) (mm) (mm)
18.4
12mm 13” 330 2 2.0 +0.5 -0 13 1 20.5 0.2 50 (min) 14.4 (max)
(max)

Tape Leader and Trailer Specifications

User Direction of Feed

Min. 390mm
END

Top Cover
Tape START

Min. 160mm Min. 160mm Carrier Tape Sealed

with Cover Tape
Trailer Tape (No Components) Leader Tape (No Components)

Note: There shall be a leader of at least 230mm which may consist of carrier tape and/or cover tape or a start tape followed by at least 160mm of
empty carrier tape sealed with cover tape.

Note: There shall be a trailer of at least 160mm of empty carrier tape sealed with cover tape. The entire carrier tape must release from the reel
hub as the last portion of the tape unwinds from the reel without damage to the carrier tape and the remaining components in the cavities.

MSOP-8 Package Information 5 of 8 September 2021

Rev. 2021-09-17 www.diodes.com © Diodes Incorporated
2 MSOP-8
Embossed Carrier Tape Specifications (Continued)

MSOP-8 Package Information 6 of 8 September 2021

Rev. 2021-09-17 www.diodes.com © Diodes Incorporated
2 MSOP-8

Maximum Component Movement in Tape Pocket

MSOP-8 Package Information 7 of 8 September 2021

Rev. 2021-09-17 www.diodes.com © Diodes Incorporated
2 MSOP-8

Surface Mount Reel Specifications

A B Max C D Max N Min G T Max

Tape Width Reel Size
(mm) (mm) (mm) (mm) (mm) (mm) (mm)

7” 178 2 2.0 +0.5 -0 13 +0.5 -0.2 20.5 0.2 55 5 12.4 +2.0 -0.0 18.4
12mm
13” 330 2 2.0 +0.5 -0 13 +0.5 -0.2 20.5 0.2 100 2 12.4 +2.0 -0.0 18.4

Tape Leader and Trailer Specifications

Note: There shall be a leader of at least 230mm which may consist of carrier tape and/or cover tape or a start tape followed by at least 160mm of
empty carrier tape sealed with cover tape.

Note: There shall be a trailer of at least 160mm of empty carrier tape sealed with cover tape. The entire carrier tape must release from the reel
hub as the last portion of the tape unwinds from the reel without damage to the carrier tape and the remaining components in the cavities.

MSOP-8 Package Information 8 of 8 September 2021

Rev. 2021-09-17 www.diodes.com © Diodes Incorporated