VG100P
VG100P
VG100P
50HZ
VG100P
VG100P
Standard Features
• Compact structure with high-strength chassis; • Top lifting, Forklift bottom hole design, easy to
• Easy operation and maintenance, Low cost; transport;
• Excellent performance damping system; • Industrial muffler;
• Compliance with international electrical safety standards • Noise reduction structure,Low noise;
of electrical system; • Convenient power output interface;
• 8 hours base tank; • Deepsea Module Controller
• High-performance maintenance-free batteries with • Customized design for user
isolation switch
• 50℃Radiator;
Page: 1/4
VG100P
Engine Specifications
Engine model 1104C-44TAG2
Engine manufacturer PERKINS
Number of cylinders 4
Cylinder arrangement Vertical in-line
Cycle Four stroke
Aspiration Turbocharged, Air to air Charge Cooled
Bore Stroke (mm mm) 105 x 127
Displacement (Liter) 4.4
Compression Ratio 18.23 : 1
Prime power/speed 90.1 KW / 1500rpm
Standby power/speed 99.5 KW / 1500rpm
Speed governor Electronic
Cooling system Watercooled
Frequency Regulation, Steady speed (%) ≤0.75%
Total lubrication system capacity (L) 8.0
Coolant capacity (L) 12.6
Fuel consumption at 100% load(Ltr/H) 22.6 (at 1500RPM)
Starter motor DC 12V
Alternator DC 12V
Alternator Specifications
Alternator Brand / Model STAMFORD / UCI274C
Rated output prime power 100 kVA
AVR Type SX440
Rated speed 1500 RPM
Rated frequency 50 Hz
Phase 3
Rated voltage 380/220 V
Exciter type Self excitation, Brushless
Power factor 0.8
Voltage adjust range ≥5%
Voltage regulation ± 1.0 %
Insulation grade H
Protection grade IP23
Winding Stator Double Layer Lap
Winding Pitch Two Third
Winding Leads 12
Waveform Distortion No Load < 1.5% Non Distorting Balanced Linear Load < 5.0%
Maximum Overspeed 2250 rev/min
Optional
Optional Alternator brand N/A
Optional Alternator model N/A
Rated output prime power N/A
Page: 2/4
VG100P
Control System
Deepsea – DSE6120MKII
All V-GEN Gensets have a control cabinet (the Deepsea control module DSE6120/DSE7320 as standard)
mounted on isolated support.
Main Features
AMF and ATS and communication and expansion Protecting Functions
function
Designed to work with electronic or non-electronic or gas Over frequency / under frequency
engine simultaneously. (support many kinds of engines Over voltage / under voltage
ECU). Over current
Manual, Automatic, Test and remote control mode Over speed /under speed
selectable. Emergency stop
Monitoring and measuring operational parameters of Low oil pressure
the mains supply and genset. High water temperature
Indicating operation status, fault conditions, all Failure to start/Failure to stop
parameters and alarms Battery charger failure
Multiple protections and multiple parameters display. Comprehensive shutdown or warning on fault
Includes 12 inputs and eight outputs. 8 inputs are condition
configurable and 4 outputs are configurable.
Can be programmed using the front panel or by using the Key Benefits
PC software.
Support twelve languages. The language was edited by
customer. Automatically transfers between mains
(utility) and generator
Graded protection: pre-alarm, shutdown and electrical
trip, flexible setting. Hours counter provides accurate
information for monitoring and
The module can be pre-set for four operating modes and
protecting parameters. maintenance periods
User-friendly set-up and button layout for
The firmware can be updated automatically, so customer
can have the latest version. ease of use
Multiple parameters are monitored
simultaneously
Module can be configured to suit a wide
range of applications
Compatible with a wide range of CAN
engines
Uses DSE Configuration Suite PC Software
for simplified configuration
IP65 rating (with optional gasket) offers
increased resistance to water ingress
Licence-free PC software
Page: 3/4
VG100P
Optional
Contact Us
DISTRIBUTED BY:
VGEN by Rajawali Diesel reserves the right to make
changes in model, technical specification, color,
configuration and accessories without prior notice.
Please contact the salesman before ordering.
○C Manufactured by VGEN, All right reserved.
Page: 4/4