MA6221-Q17K: RF Optical Mouse Controller

MA6221-Q17K
RF Optical Mouse Controller
Preliminary Spec 1.1
SEMICONDUTOR CORP.
2002 All rights reserved

MA6221-Q17K Optical Mouse Controller IC
Content
1. General Description........................................................1
2. Features ..........................................................................1
3. Block Diagram................................................................2
4. Pin Out & Description ....................................................3
5 Optical sensor power saving. ...........................................5
6 Package Type ...................................................................5
7 Application circuit............................................................6
MOSART SEMICONDUCTOR CORP.

1. General Description
The MA60H22 is an encoder IC that can encode the data from the mouse optical sensor and
sends these data via RF at 27 MHZ. The MA60H22 is equipped with a complete set of FSK
modulator that also provides single/dual RF channel solution. This will reduce the extra external
component for RF interface. The two kinds of output from mouse optical sensor, namely quadrature
and SPI (serial peripheral interface) are supported. Furthermore, the MA60H22 has a DC/DC
embedded. It can work with MOSART MA606 (mouse U+P receiver controller) to be a pair of RF
mouse. Or it can work with MOSART MA60H13 (keyboard + mouse PS/2 receiver controller) to be
a pair of RF keyboard + mouse solution.
2. Features
l 76.8KHz clock rate (low power consumption)

l Hi speed & 32.768KHz OSC supported (optional)
l Build-in data scrambler and error detection encoder
l Build-in single/dual channel RF oscillator, modulator and power amplifier
l 4k bps Baud rate in air.
l ID change solution (256 random IDs) to resist the interference from the same
device
l 3V or 5V DC/DC embedded
l Battery low detection
l ID retention function when battery removed.
l X/Y axis support for both quadrature and SPI(serial peripheral interface) input
l Z axis supports for optical and mechanical inputs (Z/2,Z/4 can also be selected)
l Support Agilent 2000, 2030, 2051, 2610 and 2620 optical sensors.
l Support all kinds of Pixart sensors (PAN101, PAN201)
MOSART SEMICONDUCTOR CORP. 1

3. Block Diagram
FOSC1
FOSC2
clock
Generrator 6502
Programmabe Interrupt
Timer1 Generator
Programmabe ROM
Timer2 3K Bytes
Watch Dog
RAM
Timer
64 Bytes
OSC1 Clock
Generator PD
OSC2 WA
WB
D
TXCB PORT SCLK
e
FBUT 8bits SDIO
b
BBUT Random ID BATL
o
RBUT Generator NC
u
MBUT TYPE
n
LBUT
c
e
F7632 ORFIN0
RF
_SEL MOUSE OSC ORFIN1
CORE ORFO
X1/X2 MOTION
Y1/Y2 DETECT
PA RFOUT
Z1/Z2
PACKET
COMPOSER
IR DATA
IR TXD
Controller MOD
VCC Z axis
POWER
VSS resolution
RESET
selector
VL DC/DC
VL_NM IR_ME_SEL
IR_ME_SEL
DCVR
SPI_Q_SEL
SVD_IN SVD

4. Pin Out & Description
OSC1 1 28 VL_NM
VSS 2 27 VL
OSC2 3 26 DCVR
VDD 4 25 SVD_IN
RBUT 5 24 FBUT
MBUT 6 23 BBUT
MA6221-Q17K
LBUT 7 22 TXCB
RFOUT 8 21 Y2IN
ORFIN0 9 20 Y1IN
ORFO 10 19 BATL
TXD 11 18 X1IN
PD 12 17 X2IN
WA 13 16 Z2IN
WB 14 15 Z1IN
SOP28

PAD No. Symbol I/O Description

1 OSC1 I Oscillator Input
2 VSS P Ground
3 OSC2 O Oscillator Output
4 VDD P Power
5 RBUT I Right Button
6 MBUT I Middle Button
7 LBUT I Left Button
8 RFOUT O Internal Modulated RF Output
RF Internal Buffer Input Set 0 (27MHZ
9 ORFIN0 I
Oscillator Input)
RF Internal Buffer Output (27MHZ Oscillator
10 ORFO O
Input)
11 TXD O Digital Encoded Data
12 PD I/O Control power down signal of optical sensor
13 WA I/O Wakeup point A
14 WB I/O Wakeup Point B
15 Z1IN I Z Axis Input (3D)
16 Z2IN I Z Axis Input (3D)
17 X2IN I X Axis quadrature input from optical sensor
18 X1IN I X Axis quadrature input from optical sensor
19 BATL I/O Battery Low display
20 Y1IN I Y Axis quadrature input from optical sensor
21 Y2IN I Y Axis quadrature input from optical sensor
22 TXCB I ID Change Button
23 BBUT I Backward Button
24 FBUT I Forward Button
25 SVDIN I Supply Voltage Detect Input
26 DCVR I DC/DC Voltage Reference
27 VL O DC/DC Lx Switch output
28 VL_NM O DC/DC Lx Switch output without MOS

5 Optical sensor power saving.

Step1. Sensor is in charge of the power control
Step2. Controller takes charge of the control for 8 mins.
Step3. Power down completely. Power-up mode is activated by any one of the keys or scroll bar.
PD timing of step2.
Sensor Type PD control method Time
ADNS2000 PD always low 8 mins
ADNS2030 PD High11ms, low 4.5ms 8 mins
ADNS2051 PD High11ms, low 4.5ms 8 mins
PAN101 PD always low 8 mins
Note that PD is active low.
6 Package Type
28pin/SOP/Body: 300mil/Pitch: 1.27mm
28 15
0.4mm
2.54mm
10.31mm
7.5mm
1.27mm 0.406mm
1 14
17.83mm

7 Application circuit

MA6221-Q17K: RF Optical Mouse Controller

Uploaded by

Copyright:

Available Formats

MA6221-Q17K: RF Optical Mouse Controller

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

MA6221-Q17K: RF Optical Mouse Controller

Uploaded by

Copyright:

Available Formats

MA6221-Q17K

RF Optical Mouse Controller

Preliminary Spec 1.1

2002 All rights reserved

MOSART SEMICONDUCTOR CORP.

l 76.8KHz clock rate (low power consumption)

MOSART SEMICONDUCTOR CORP. 1

MOSART SEMICONDUCTOR CORP. 2

4. Pin Out & Description

MOSART SEMICONDUCTOR CORP. 3

PAD No. Symbol I/O Description

MOSART SEMICONDUCTOR CORP. 4

5 Optical sensor power saving.

Note that PD is active low.

MOSART SEMICONDUCTOR CORP. 5

MOSART SEMICONDUCTOR CORP. 6

You might also like