ZAXIS-5 series

HYDRAULIC EXCAVATOR
Model Code : ZX160LC-5A
Engine Rated Power : 79.2 kW (106 HP)
Operating Weight : 16 600 - 17 700 kg
Backhoe Bucket : ISO Heaped : 0.52 - 0.82 m3
 New ZAXIS provides reliable solutions: impressive fuel economy, swift front movements, and
easy operation. You'll also find Hitachi technological prowess and expertise, such as the
optimized hydraulic system and engine.
New ZAXIS features the key benefits of high quality, low fuel consumption,
and high durability, all of which serve to ensure low running costs.
New ZAXIS, which is empowered by comprehensive evolution,
will realize customers’ visions and dreams, and pioneer your
colorful future.

el
Fu tion
w
L o ump
n s
h Co
H i g li t y
a
Qu Key Benefits for Low Running Costs
h
H i g b ili t y
ra
Du

No Compromise on Operator
More Production with Less Fuel Hitachi Support Chain
Page 4-5
Comfort Page 12-13
Page 8-9

· Achieving low fuel consumption and a large workload · Comfortable operating environment · Remote fleet management with Global e-Service
· Powerful operation · Comfort-designed operator seat · Parts and service
· Easy-to-use attachments · Robust cab
· New, easy-to-use multifunction monitor

High Quality and Durability Simplified Maintenance

Page 6-7 Page 10-11

· New more reliable and durable engine · Dust-proof indoor net

· Durable design · Grouped remote inspection points
· Improved engine start-up performance in cold weather · Bottom cover for fuel tank cleaning
· Low life cycle costs

Note: The photos in this brochure show excavators with optional equipment.

2 3
 More Production with
Less Fuel

Achieving Low Fuel Consumption and a Large Workload Powerful Operation Easy-to-Use Attachments

The HIOS III hydraulic system, which is an operator-friendly Rapid Arm Roll-in The Power Boost mode allows the operator to surge 10% The operator can change over valves, adjust extra circuit
HIOS hydraulic system combined with efficient hydraulic Arm roll-in speed increases by combined flow from arm and more digging force for powerful excavation by pressing its flow, and check settings from the multifunctional monitor
control, was selected. It includes an hydraulic boosting boom cylinders through regenerative valves for productive button on the control lever. It can obtain the big digging force next to the operator seat. What’s more, 11 types, including
system and a enhanced boom recirculation system to excavation. when the power is needed. flow rate setting, can easily be selected by
increase operating speed and reduce fuel consumption. their identified names.
Fast Arm Speed During Boom Lowering
12% Reduction in Fuel Consumption Arm speed increases by boom weight during boom lowering,
New ZAXIS is a fuel-thrifty excavator that can reduce fuel without needing pressure oil from a pump. That is, arm circuit
consumption by 12%, compared to the conventional flow is increased for higher arm speed, allowing for quick
ZX160LC-3. loading of a dump truck and positioning of the front.

More Fuel Reduction in the ECO Mode

The ECO mode, a new economical mode, can further cut fuel Enter attachment name

consumption by 11% compared to the PWR mode.

4 5
 Prestige R&D and Quality Control

High Quality and

Durability

Mid-sized excavator assembly line Main frame welding line

Computer-Aided Engineering Main pump testing area Simulation testing from

operator seat

Hitachi has earned praise for technological prowess and

product performance around the world.
R&D Division has a track record – including excellent design,
stress analysis expertise using CAE system, and abundant
production data base. What’s more, a large-scale durability
test field allows for a series of stringent testing of new
machines.
Production Division strives to automatize production
processes, including robotic welding, machining, painting,
assembling and transferring.

The upperstructure frame is The boom top and foot are reinforced with thickened high-
New More Reliable and Durable Engine Durable Design reinforced with the D-section tensile steel brackets, which incorporate steel bushings to
skirt to increase Cross-section enhance durability.
Impact
rigidity against
The arm-bucket joint is protected by WC thermal spraying
The new engine, which is Large size efficiency cooling damage by
Impact

designed for use in harsh on its contact surfaces to reduce wear and jolt. The HN
system keeps engine cool, obstacles. Impact
D-section skirt
operating environment, is bushings, utilized on joint pins, retain grease inside for longer
helps machine hard works. In
highly durable thanks to a The X-beam frame is made greasing intervals.
addition, the expansion tank is
fundamental review of the adopted in the cooling system. monolithically with fewer welds
fuel and cooling systems. It So, the air in the coolant circuit for higher rigidity and durability.
also includes a new auto-idle Improved Engine Start-up
can always be discharged and
stop mechanism to reduce Performance in Cold Weather
display the cooling performance X-beam frame
fuel consumption and CO2 of the machine fully.
emissions. Front idlers and adjuster cylinders are integrated to increase When the ambient temperature is low,
durability. Idler brackets and travel motor brackets are both waxing light oil components will clog the fuel
thickened for added durability. pre-filter. The recirculation filter prevents this
by recirculating hot fuel from the engine.
Recirculation filter

6 7
No Compromise on Operator
Comfort

Comfortable Operating Environment Comfort-Designed Operator Seat

You'll feel comfortable and confident, with plenty of The luxury cloth seat is fitted with a headrest and
leg space and excellent visibility when operating in arm rests for operator comfort. The seat can be
the cab. The new compact console gives more leg adjusted in multiple ways, sliding and reclining, to
space. The new door pillar is shifted rearward by suit operator’s size and preferences. The seat can
70 mm to widen an entry space for easy access. A slide rearward by 40 mm more for added leg space.
new LED room light, interlocked with the door, turns An air suspension seat with a heat pad is optional.
on when the door opens. The front window is easily New, Easy-to-Use Multifunction Monitor Menu Items

removed and stored overhead using slide rails. The The new multi-language, multifunction monitoring system
overhead window is openable for ventilation. Ample comprises a 7-inch high-resolution color monitor and a
air conditioner vents are located strategically for Robust Cab multifunction controller. The monitor allows the operator to check
uniform air circulation inside the cab. The control varying operating variables: hydraulic oil temperature, fuel level,
panel and control levers are arranged within easy The robust cab, meeting the OPG (Top Guard Level work mode, full-auto air conditioner, AM/FM radio, rear view Main menu

reach of the operator. AM/FM radio and AUX port 1), protects the operator from falling objects. The monitor camera, maintenance support, and attachment flow
(optional) for a mobile music player are available for Roll-over Protective structure (ROPS) is designed adjustment. Menu items can be selected and adjusted by a
a long work day with less fatigue. All these designs to unlikely event of machine tipping or rolling multifunction controller on the control panel. A new rear view Work mode
menu
focus on operator comfort. over (Optional). The pilot control shut-off lever is monitor camera always displays the view behind the machine.
provided with a neutral engine start system that
permits engine starting only when the pilot control Engine oil

shut-off lever is in Lock position.

8 9
 Simplified
Maintenance

Engine Oil Filter : 500 h

Bottom Cover for Fuel Tank Hydraulic Oil Filter : 1 000 h
Dust-Proof Indoor Net Grouped Remote Inspection Points Low Life Cycle Costs Fuel Filter : 1 000 h
Cleaning Fuel Pre-Filter : 1 000 h

A dust-proof indoor net provided at the Service points are concentrated inside left The fuel tank is equipped with a bottom Service intervals are long enough to slash
front of radiator, can be easily removed and and right covers that are readily accessible cover, allowing for easy cleaning of the maintenance costs. Engine Oil : 500 h
cleaned with compressed air. At the rear from ground level for convenient servicing inside of the tank. Hydraulic Oil : 5 000 h
of the radiator, air blowing can be done and inspection, including water draining from
through a one-touch open cover. The air the fuel tank, and replacement of filters.
condenser is openable for easy cleaning at Front : 500 h

its rear.

Boom Foot : 500 h

Bucket : 500 h
Lubricant

Consumables

10 11
 Hitachi Support Chain
Hitachi Support Chain is a full customer support system offered after
buying a Hitachi machine.

Remote Fleet Management with Global e-Service

Easy Access to On-Site Machines through the Internet Main Features of Global e-Service

This on-line fleet management system allows you to access Functions

each on-site machine from a PC in your office. You can get Global e-Service provides easy access to a machine on
its operating information and location to increase productivity site, conveying operating information and log, including
of the fleet and reduce downtime. Operating data and log daily operating hours, fuel level, temperatures, pressures,
are sent to a Hitachi server for processing, and then to and likes.
customer and dealers around the world. This system is
Maintenance
available 24 hours a day, all the year around.
Maintenance data and log are displayed on a easy-to-read
monitor screen, suggesting recommended maintenance for
efficient fleet management.
Antenna(GPRS) or Satellite Information Center,
Machine Hitachi Construction Machinery

Hitachi Construction Machinery

Group and Dealers
Customer Operating Information

Information sharing
Quick access to information Operation
on remote machines Offering prompt and
adequate service
Internet
Maintenance

Note: In Some Regions, Global e-Service Is Not Available by Local Regulations. Location

Parts and Service

Hitachi full customer support is available every area on the globe for full customer
satisfaction through Hitachi local dealers.

quality, well-maintained GETs will help you get customers' protecting machines under tough operating conditions,
Parts trust. avoiding unexpected downtime, and reducing repair costs.
Note: Some dealers do not handle Hitachi GETs. Note: Warranty conditions vary by equipment.

Hitachi Global Online Network, a parts supply system, is Remanufactured Components Diagnostic Tools — Maintenance Pro
linked with Japan Parts Center, overseas depots and over Hitachi components are remanufactured according to the Electronic control system needs quick on-site solutions, apart
150 dealers abroad to deliver on-line parts information, stringent remanufacturing standards at four factories around from mechanical repairs. Hitachi’s Maintenance Pro can
including in-stock parts, order receptions, shipments and the world. They have high quality equivalent to new ones, diagnose machine failures in a short time by plugging a PC
delivery period of over one million parts and components. and backed up by Hitachi warranty system. into a failed machine.
Note: Some dealers do not handle Hitachi Remanufactured Components.
Genuine Hitachi Parts Technical Training
Genuine Hitachi parts, meeting Hitachi stringent quality On-site servicing matters despite locations to keep the
standards, are guaranteed according to Hitachi warranty machine at peak performance and reduce downtime.
standards. The use of genuine Hitachi parts, including Service Technical Training Center (TTC), located in Japan, educates
engine, fuel, hydraulic oil and filters, may slash running costs, and trains service technicians and service support personnel
and extend machine life. coming from Hitachi dealers and factories on the globe
Extended Warranty — HELP
according to the international training programs.
Ground Engaging Tools (GETs) Hitachi Standard Warranty System is available on all new
Hitachi provides an array of Hitachi Ground Engaging Tools Hitachi machines. In addition, Hitachi offers Hitachi Extended
developed and built for a variety of applications. Using high- Life Programs (HELPs) to suit customer expectations –

12 13
 SPECIFICATIONS

ENGINE UNDERCARRIAGE WEIGHT: BASIC MACHINE and COMPONENTS

Model ......................... Isuzu GI-4JJ1X Tracks Basic Machine Weight and Overall width Component weights
Type ........................... 4-cycle water-cooled, direct injection Heat-treated connecting pins with dirt seals. Hydraulic (grease) track
Excluding front-end attachment, fuel, hydraulic oil, ZX160LC-5A
Aspiration ................... Turbocharged, intercooled adjusters with shock-absorbing recoil springs.
coolant, etc., and including counterweight.
Counterweight 3 200 kg
No. of cylinders .......... 4
Rated power Numbers of Rollers and Shoes on Each Side Boom (with boom and arm cylinder) 1 620 kg
ISO 9249, net ......... 79.2 kW (106 HP) at 2 200 min-1 (rpm) Upper rollers ...............  2 Arm 2.22 m (with bucket cylinder) 770 kg
SAE J1349, net ...... 79.2 kW (106 HP) at 2 200 min-1 (rpm) Lower rollers ..............  7 ZX160LC-5A
Arm 2.58 m (with bucket cylinder) 800 kg
Maximum torque ........ 361 Nm (36.8 kgfm) at 1 800 min-1 (rpm) Track shoes ................ 43 Shoe width Weight Overall width
Track guard ................ 1 Arm 3.08 m (with bucket cylinder) 870 kg
Piston displacement ... 2.999 L 500 mm 13 200 kg 2 500 mm
Bore and stroke ......... 95 mm x 105 mm Bucket 0.60 m3 500 kg
600 mm 13 400 kg 2 590 mm
Batteries ..................... 2 x 12 V / 70 Ah Travel Device
Each track driven by 2-speed axial piston motor. 700 mm 13 600 kg 2 690 mm
Parking brake is spring-set/hydraulic-released disc type.
HYDRAULIC SYSTEM Automatic transmission system: High-Low.
Hydraulic Pumps Travel speeds .............. High : 0 to 5.1 km/h
Low : 0 to 3.3 km/h
BUCKET AND ARM DIGGING FORCES
Main pumps ............... 2 variable displacement axial piston pumps
Maximum oil flow ... 2 x 180 L/min
Pilot pump .................. 1 gear pump Maximum traction force ... 169 kN (17 300 kgf) Arm length 2.22 m 2.58 m 3.08 m
Maximum oil flow ... 33.6 L/min Bucket digging force* ISO 112 kN (11 400 kgf) 112 kN (11 400 kgf) 112 kN (11 400 kgf)
 Gradeability ................. 70% (35 degree) continuous Bucket digging force* SAE 99 kN (10 100 kgf) 99 kN (10 100 kgf) 99 kN (10 100 kgf)
Hydraulic Motors
Arm crowd force* ISO 115 kN (11 700 kgf) 91 kN (9 300 kgf) 81 kN (8 300 kgf)
Travel ......................... 2 variable displacement axial piston motors SERVICE REFILL CAPACITIES
Swing ......................... 1 axial piston motor Arm crowd force* SAE 110 kN (11 200 kgf) 88 kN (8 900 kgf) 78 kN (8 000 kgf)
Fuel tank .................................................................................... 320.0 L
Engine coolant .............................................................................. 24.0 L * At power boost
Relief Valve Settings Engine oil ...................................................................................... 17.0 L
Implement circuit ........ 34.3 MPa (350 kgf/cm2) Swing device .................................................................................. 6.2 L
Swing circuit ............... 29.3 MPa (299 kgf/cm2) Travel device (each side).................................................................. 6.8 L BACKHOE ATTACHMENTS
Hydraulic system ........................................................................ 210.0 L Boom and arms are of welded, box-section design. 5.10 m boom, and 2.22 m, 2.58 m and 3.08 m arms are available.
Travel circuit ............... 34.3 MPa (350 kgf/cm2)
Hydraulic oil tank ........................................................................ 125.0 L Bucket is of welded steel structure. Side clearance adjust mechanism provided on the bucket joint bracket.
Pilot circuit ................. 3.9 MPa (40 kgf/cm2)
Power boost .............. 38.0 MPa (388 kgf/cm2)
Buckets
WEIGHTS AND GROUND PRESSURE
Recommendation
Hydraulic Cylinders
Operating weight and Ground pressure Capacity Width
No. Of
Quantity Bore Rod diameter Weight ZX160LC-5A
ZX160LC- 5A teeth
Boom 2 110 mm 80 mm Without side With side
ISO heaped Arm 2.22 m Arm 2.58 m Arm 3.08 m
Shoe type Shoe width Arm length kg kPa(kgf/cm2) cutters cutters
Arm 1 120 mm 90 mm 0.52 m3 790 mm 910 mm 4 480 kg
2.22 m 16 600 48 (0.49)
Bucket 1 105 mm 75 mm 0.60 m3 925 mm 1 045 mm 5 500 kg *2
500 mm 2.58 m 16 600 48 (0.49)
0.70 m3 1 005 mm 1 125 mm 5 535 kg *2
3.08 m 16 700 48 (0.49)
UPPERSTRUCTURE 2.22 m 16 800 40 (0.41)
0.82 m3 1 140 mm 1 260 mm 5 580 kg —

Revolving Frame Triple grouser 600 mm 2.58 m 16 800 40 (0.41)

*1 0.60 m3 925 mm 1 045 mm 5 610 kg *2

D-section frame skirt for resistance to deformation. *1 0.70 m3 1 000 mm 1 120 mm 5 635 kg *2
3.08 m 16 900 41 (0.42)
Swing Device One-point ripper 1 540 kg — —
2.22 m 17 000 35 (0.36)
Swash plate piston motor with planetary reduction gear is bathed in oil. Slope-finishing blade : Width 1 000 mm, length 1 700 mm — 520 kg
Swing circle is single-row. Swing parking brake is spring-set/hydraulic- 700 mm 2.58 m 17 100 35 (0.36)
released disc type. V shape bucket 3 530 kg
3.08 m 17 100 35 (0.36)
Swing speed .............. 13.3 min-1 (rpm) 2.22 m 17 600 42 (0.43) *1 Reinforced bucket Suitable for materials with density of 2 000 kg/m3 or less
Swing torque .............. 44 kNm (4 490 kgfm) *2 Applicable 700 mm shoe only Suitable for materials with density of 1 600 kg/m3 or less
Flat 600 mm 2.58 m 17 600 42 (0.43)
Suitable for materials with density of 1 100 kg/m3 or less
Operator's Cab 3.08 m 17 700 42 (0.43) Heavy-duty service
Independent spacious cab, 1 005 mm wide by 1 675 mm high, *1 :Including 0.60 m3 (ISO heaped) bucket weight (500 kg) and counter- Slope-finishing service
conforming to ISO* 10262 OPG Top Guard Level 1. weight (3 200kg). — Not applicable
* International Organization for Standardization

14 15
 SPECIFICATIONS

WORKING RANGES DIMENSIONS

K M
meter
E D/D'
10

9
E
8
F F’ N
7
L C
G
6 I
H A
5 J B
C
4
Unit: mm

3 D ZX160LC-5A

A Distance between tumblers 3 100

2 B Undercarriage length 3 920

C Counterweight clearance 1 030

1 D'
D Rear-end swing radius 2 550

0 D’ Rear-end length 2 530

Ground Line E Overall width of upperstructure 2 480
1 F Overall height of cab 2 950
A' F’ Overall height of upperstructure 3 010
2
G Min. ground clearance 470
F A
B B' H Track gauge 1 990
3
I Track shoe width 500
4 J Undercarriage width 2 490

K Overall width 2 500

5
L Track height with triple grouser shoes 920

6 M Overall length

With arm 2.22 m 8 720

7
2.5 m With arm 2.58 m 8 620

With arm 3.08 m 8 650

8
12 11 10 9 8 7 6 5 4 3 2 1 0 meter N Overall height of boom

With arm 2.22 m 3 190

With arm 2.58 m 2 870

With arm 3.08 m 3 110

Unit: mm
G: Triple grouser shoes
Arm length 2.22 m 2.58 m 3.08 m

A Max. digging reach 8 520 8 870 9 330

A’ Max. digging reach (on ground) 8 340 8 700 9 170

B Max. digging depth 5 620 5 980 6 490

B’ Max. digging depth for 2.5 m level 5 320 5 730 6 260

C Max. cutting height 8 620 8 890 9 130

D Max. dumping height 5 940 6 160 6 400

D’ Min. dumping height 2 850 2 360 1 860

E Min. swing radius 3 290 2 910 2 920

F Max. vertical wall digging depth 4 470 5 110 5 650

Excluding track shoe lug

16 17
 EQUIPMENT
Standard and optional equipment may vary by country, so please consult your Hitachi dealer for details.

: Standard equipment : Optional equipment

ZX160LC-5A ZX160LC-5A ZX160LC-5A ZX160LC-5A

ENGINE CAB MONITOR SYSTEM UNDERCARRIAGE
Air cleaner double filters All-weather sound suppressed steel cab Alarms: Bolt-on sprocket
overheat, engine warning, engine oil pressure, alternator,
Alternator 50 A AM-FM radio with 2 speakers Reinforced track links with pin seals
minimum fuel level, hydraulic filter restriction, air filter
Auto idle system Ashtray restriction, etc Shoe: 500 mm triple grouser
Auto shut-down control Auto control air conditioner Alarm buzzers: Track undercover 6.0 mm reinforced
overheat, engine oil pressure overlord
Cartridge-type engine oil filter AUX. terminal and storage Travel direction mark on track frame
 isplay of meters:
D
Cartridge-type fuel main filter with water separator Cab (Center pillar reinforced structure) coolant temperature, fuel rate hour, clock Travel motor covers
Cartridge-type fuel pre-filter Cigarette lighter 24V Other displays: Travel parking brake
 ry-type air filter with evacuator valve (with air filter
D Drink holder work mode, auto-idle, glow, rearview monitor, operating Upper and lower rollers
restriction indicator) conditions, etc
Drink holder with hot & cool 1 track guard (each side)
Dust-proof indoor net 32 languages selection
Electric double horn 4 tie down brackets
ECO/PWR mode control
Engine shut-off switch
Engine oil drain coupler LIGHTS
Evacuation hammer FRONT ATTACHMENTS
Engine warm-up device Additional boom light
Floor mat Arm 2.58 m
Fan guard Additional cab roof front lights
Footrest Boom 5.10 m
Fuel cooler Rear light
Front window washer Bucket 0.60 m3 (ISO heaped)
Maintenance free pre-cleaner 2 working lights
 ront windows on upper, lower and left side can be
F Centralized lubrication system
Radiator expansion tank opened
Dirt seal on all bucket pins
Glove compartment UPPER STRUCTURE
Flanged pin
HYDRAULIC SYSTEM Hot & cool box Batteries 70 Ah x 2
HN bushing
Auto power lift Intermittent windshield wipers Counterweight 3 200 kg
Reinforced resin thrust plate
Control valve with main relief valve Key cylinder light Electric fuel refilling pump
WC (tungsten-carbide) thermal spraying
 igh mesh full flow filter
H LED room light with door courtesy Fuel level float
with restriction indicator
Lower cab front guard Hydraulic oil level gauge
One extra port for control valve ATTACHMENTS
Lockable fuel refilling cap
Pilot filter OPG top guard Level I (ISO10262) compliant cab Additional pump
Lockable machine covers
Power boost Assist piping
Pilot control shut-off lever Rear view camera
Suction filter Attachment basic piping
Rain guard Rear view mirror (right & left side)
Work mode selector Breaker and crusher piping
Rear tray Swing parking brake
Parts for breaker and crusher
Retractable seat belt Tool box
Pilot accumlator
ROPS (ISO12117-2) compliant cab Undercover
2 pump combined flow for attachment basic piping
Rubber radio antenna Undercover 6.0 mm reinforced
Seat : air suspension seat with heater Utility space
MISCELLANEOUS
Seat : fablic seat
Global e-Service
Seat : mechanical suspension seat
Onboard information controller
Seat adjustment part : backrest, armrest, height and
angle, slide forward / back Skid-resistant plates and handrails

Short wrist control levers (bold type) Standard tool kit

Short wrist control levers (slim type) Swing motion alarm device with lumps

Upper cab front guard Travel motion alarm device

4 fluid-filled elastic mounts

12 V power source

18 19
 LIFTING CAPACITIES (Without Bucket)
Notes: 1. Ratings are based on ISO 10567. A
2. Lifting capacity does not exceed 75% of tipping load with the machine on firm, A: Load radius
level ground or 87% full hydraulic capacity. B: Load point height
3. The load point is the center-line of the bucket pivot mounting pin on the arm. B
4. *Indicates load limited by hydraulic capacity. C: Lifting capacity
5. 0 m = Ground. C

For lifting capacities, subtract bucket and quick hitch weight from lifting capacities without bucket.

ZX160LC-5A Rating over-front Rating over-side or 360 degrees Unit : kg

Load Load radius
At max. reach
point 1.5 m 3.0 m 4.5 m 6.0 m 7.5 m
Conditions
height
m meter

Boom 5.10 m 4.5 *4 980 4 980 *4 600 3 280 4 350 2 880 6.51
Arm 2.22 m 3.0 *6 270 4 770 4 820 3 160 3 830 2 520 6.97
Counterweight
1.5 7 180 4 470 4 670 3 020 3 670 2 390 7.08
3 200 kg
Shoe 500 mm 0 (Ground) 7 000 4 310 4 570 2 930 3 780 2 450 6.87
-1.5 *11 720 7 900 6 970 4 280 4 550 2 920 4 560 2 750 6.30
-3.0 *10 440 8 080 7 080 4 380 5 630 3 570 5.25
Boom 5.10 m 6.0 *3 300 *3 300 *3 150 *3 150 6.05
Arm 2.58 m 4.5 *4 560 *4 560 *4 290 3 310 *3 080 2 640 6.89
Counterweight
3.0 *8 860 *8 860 *5 870 4 840 4 840 3 170 *3 190 2 340 7.33
3 200 kg
Shoe 500 mm 1.5 7 240 4 510 4 680 3 030 3 410 2 220 7.44
0 (Ground) *6 270 *6 270 7 010 4 320 4 560 2 920 3 500 2 270 7.23
-1.5 *5 740 *5 740 *10 420 7 840 6 950 4 260 4 520 2 880 3 890 2 510 6.69
-3.0 *10 310 *10 310 *11 030 7 990 7 020 4 320 4 920 3 140 5.72
-4.5 *6 100 5 410 3.98
Boom 5.10 m 6.0 *3 390 *3 390 *2 590 *2 590 6.61
Arm 3.08 m 4.5 *3 860 3 350 *2 540 2 370 7.38
Counterweight
3.0 *7 400 *7 400 *5 270 4 920 *4 470 3 200 *3 370 2 260 *2 620 2 120 7.79
3 200 kg
Shoe 500 mm 1.5 *7 580 *7 580 *6 770 4 560 4 690 3 040 3 360 2 190 *2 820 2 020 7.89
0 (Ground) *6 850 *6 850 7 010 4 120 4 550 2 900 3 300 2 130 3 180 2 050 7.70
-1.5 *5 170 *5 170 *9 640 7 740 6 900 4 210 4 480 2 840 3 470 2 230 7.20
-3.0 *8 720 *8 720 *11 650 7 840 6 920 4 230 4 510 2 860 4 210 2 690 6.30
-4.5 *9 380 8 120 *6 320 4 400 *5 800 4 040 4.79

These specifications are subject to change without notice.

Before using a machine with a satellite communication system, please make sure that
Illustrations and photos show the standard models, and may or may not include optional equipment,
the satellite communication system complies with local regulations, safety standards
accessories, and all standard equipment with some differences in color and features.
and legal requirements. If not so, please make modifications accordingly.
Before use, read and understand the Operator’s Manual for proper operation.

Hitachi Construction Machinery Co., Ltd.

www.hitachi-c-m.com KS-EN303 15.12 (KA/KA,GT2)