Ll22 12en Eur Ks Tools LKW Achse

AXLES -
www.kstools.com
SPECIAL TOOLS
AXLES - SPECIAL TOOLS
450.0210 450.0241
GREASE CAP PLIERS WHEEL CAP AND AXLE NUT SOCKET
• Hard rubber handle • Internal square drive to DIN 3121 / ISO 1174
• For the damage free drawing off of grease caps • 8-point
• 2x6 moveable adjustable steps • Positive drive of the axle nut
• Wedge shaped jaw profile • Any extensive slipping is avoided
• Head burnished • Milled out profile
• Special tool steel • Sturdy design
• Can be used with an impact wrench or torque wrench
• Special tool steel
Application range: e.g. Volvo axle nut / dust grease caps FM and FH VA (450Nm)
118,90 €
A C Length
mm mm mm
0-100 85,0 500,0
450.0180
VARIO NUT AND CAP KEY SET 13
pcs
186,90 €
• For the dismantling and assembly of vario nuts
• Suitable for exact torque with a 3/4” square drive
• Certain stop through clamping screws and adapter guides on the basic device
• Hole separation maximum 145 mm
• Slim design Spanner width D T Height
• Suitable for narrow spaces mm mm mm mm
• Ideally suited for special nuts and caps
• Special tool steel 115 138,0 45,0 80,0
Application range: 6 point-, 8 point-, nuts-

and round nuts
HOOK WRENCH WITH NOSE
• In accordance to DIN 1810 Form A
• With flexible head
• With hanging hole
• For slotted nuts
• Matt finish
• Chrome vanadium
390,90 € Spanner width

mm
Jaw opening
inche
A
mm
B
mm
L
mm
T
mm
517.1302 19-50 3/4-2 9,0 3,5 162,0 2,9 € 19,90
450.0190 517.1303 32-76 1.1/4-3 11,5 4,5 205,0 3,7 € 31,90
VARIO NUT AND CAP KEY SET, HEAVY DUTY 14 517.1304 50-120 2-4.3/4 12,4 6,5 295,0 4,6 € 42,90
• Extra heavy execution pcs
• For the dismantling and assembly of vario nuts 517.1305 114-158 4.1/2-6.1/4 12,4 9,8 315,0 8,3 € 56,90
• Suitable for exact torque with a 3/4” square drive
• Certain stop through clamping screws and adapter guides on the basic device
• Hole separation maximum 145 mm FLEXIBLE HOOK WRENCH WITH PIN
• Includes clamping chain
• Slim design • In accordance to DIN 1810 Form B
• Suitable for narrow spaces • With flexible head
• Ideally suited for special nuts and caps • With hanging hole
• Special tool steel • For pin type round nuts
• Matt finish
Application range: 6 point-, 8 point-, Nuts- and round nuts. • Chrome vanadium
Spanner width Jaw opening A B L T

mm inche mm mm mm mm
517.1312 19-50 3/4-2 9,2 4,0 165,0 4,0 € 25,90
517.1313 32-76 1.1/4-3 11,3 5,0 210,0 4,7 € 36,90
517.1314 50-120 2-4.3/4 12,5 6,0 295,0 5,5 € 48,90
577, 90
€ 517.1315 114-158 4.1/2-6.1/4 12,6 8,0 320,0 7,6 € 61,90
*This is an limited special price offer - only until stocks last.

2 All prices are ex. VAT. With the release of this leaflet all previous prices became invalid. Sold only in specialist stores. Print mistakes, errors and technical alterations excepted. Prices valid up to
31.12.2022
Spanner width Jaw opening L D1 D2 T
HEXAGON IMPACT SOCKET mm inche mm mm mm mm
• 6 point
• According to DIN 3129 / ISO 2725-2
515.1760 60,0 89,0 87,0 54,0 31,0 € 61,90
• Internal square drive to DIN 3121 / ISO 1174
• Short execution
515.1765 65,0 93,0 93,0 54,0 32,0 € 73,90
• For machinery usage
• Phosphate finish
515.1770 70,0 98,0 99,0 54,0 35,0 € 84,90
• Chrome molybdenum 515.1775 75,0 100,0 106,0 86,0 40,0 € 104,90
515.1780 80,0 100,0 112,0 86,0 47,0 € 135,90
515.1785 85,0 102,0 119,0 86,0 47,0 € 174,90
515.1790 90,0 107,0 124,0 86,0 47,0 € 208,90
515.1795 95,0 107,0 131,0 86,0 50,0 € 276,90
515.1891 1 58,0 42,0 51,0 14,0 € 19,90
515.1892 1.1/4 60,0 51,0 51,0 16,0 € 19,90
515.1893 1.7/16 62,0 56,0 52,0 20,0 € 25,90
515.1894 1.1/2 62,0 58,0 52,0 22,0 € 25,90
515.1895 1.5/8 62,0 62,0 52,0 22,0 € 31,90
Spanner width Jaw opening L D1 D2 T
mm inche mm mm mm mm 515.1896 1.13/16 64,0 68,0 58,0 23,0 € 31,90
515.1750 50,0 74,0 74,0 54,0 26,0 € 36,90 515.1897 1.7/8 66,0 70,0 58,0 24,0 € 36,90
515.1755 55,0 85,0 81,0 54,0 28,0 € 48, 90
515.1898 2.1/4 75,0 84,0 62,0 30,0 € 48,90
AXLE NUT WRENCH, LONG

• Internal square
• 8-point
• High accuracy of fit
• Extremely robust version
• Suitable for high tightening and loosening torque
Spanner width mm Length

mm
460.5323 80 205,0 € 174,90
460.5327 100 205,0 € 248,90
460.5330 115 205,0 € 276,90
Spanner width D Height T

AXLE NUT SOCKET, SHORT mm mm mm mm
• 6 point
460.0075 95 122,0 70,0 40,0 € 157,90
460.0080 100 128,0 71,0 40,0 € 208,90
460.0085 105 140,0 71,0 40,0 € 214,90
460.0090 110 147,0 71,0 40,0 € 225,90
460.0095 115 153,0 71,0 40,0 € 225,90
460.0105 120 157,0 71,0 40,0 € 242,90
460.0110 125 165,0 71,0 40,0 € 276,90
460.0115 130 170,0 71,0 40,0 € 276,90
460.0120 135 175,0 71,0 40,0 € 299,90
460.0125 140 180,0 71,0 40,0 € 299,90
460.0130 145 187,0 71,0 40,0 € 333,90
460.0135 150 195,0 71,0 40,0 € 333,90
460.0140 155 203,0 71,0 40,0 € 356,90
460.0145 160 210,0 71,0 40,0 € 378,90
460.0150 165 215,0 71,0 40,0 € 390,90
460.0155 170 220,0 71,0 40,0 € 407,90
mm mm mm mm 460.0160 175 225,0 71,0 40,0 € 424,90
460.0050 70 95,0 70,0 40,0 € 110, 90
460.0165 180 230,0 71,0 40,0 € 435,90
460.0055 75 98,0 70,0 40,0 € 118,90 460.0170 185 235,0 71,0 40,0 € 463,90
460.0060 80 104,0 70,0 40,0 € 135, 90
460.0175 190 243,0 71,0 40,0 € 526,90
460.0065 85 112,0 70,0 40,0 € 135,90 460.0180 195 247,0 71,0 40,0 € 526,90
460.0070 90 116,0 70,0 40,0 € 141, 90
460.0185 200 254,0 71,0 40,0 € 526,90

All prices are ex. VAT. With the release of this leaflet all previous prices became invalid. Sold only in specialist stores. Print mistakes, errors and technical alterations excepted. Prices valid up to
31.12.2022
3
AXLE NUT SOCKET, SHORT

• 8-point Spanner width Ø Height Depth
• High accuracy of fit mm mm mm mm
460.3320 110 137,0 77,0 40,0 € 203,90
460.3325 115 143,0 77,0 40,0 € 208,90
460.3330 120 143,0 77,0 40,0 € 231,90
460.3335 125 153,0 77,0 40,0 € 316,90
460.3340 130 158,0 77,0 40,0 € 333,90
460.3345 135 162,0 77,0 40,0 € 339,90
460.3350 140 167,0 84,0 40,0 € 361,90
460.3355 145 172,0 84,0 40,0 € 361,90
460.3360 150 178,0 84,0 40,0 € 390,90
460.3365 155 183,0 84,0 40,0 € 407,90
Spanner width Ø Height Depth
mm mm mm mm 460.3370 160 190,0 84,0 40,0 € 429,90
460.3415 70 90,0 77,0 40,0 € 141, 90
460.3375 165 194,0 84,0 40,0 € 441,90
460.3420 75 95,0 77,0 40,0 € 141,90 460.3380 170 200,0 84,0 40,0 € 463,90
460.3425 80 103,0 81,0 40,0 € 146, 90
460.3385 175 205,0 84,0 40,0 € 492,90
460.3430 85 104,0 72,5 40,0 € 157,90 460.3390 180 212,0 88,0 40,0 € 492,90
460.3435 90 112,0 84,0 40,0 € 158,90 460.3395 185 216,0 84,0 40,0 € 503,90
460.3440 95 114,0 84,0 40,0 € 174, 90
460.3400 190 221,0 84,0 40,0 € 520,90
460.3310 100 127,0 77,0 40,0 € 180,90 460.3405 195 227,0 84,0 40,0 € 526,90
460.3315 105 127,0 84,0 40,0 € 191, 90
460.3410 200 230,0 81,0 40,0 € 537,90
AXLE NUT SOCKET WITH GUIDE BAND

• 12 point
• Any extensive slipping is avoided
Spanner width mm Ø Height
mm mm
460.4220 80 107,0 90,0 € 146,90
460.4225 85 114,0 90,0 € 158,90
460.4230 90 119,0 90,0 € 174,90
460.4235 95 125,0 90,0 € 180,90
460.4240 100 131,0 90,0 € 191,90
460.4245 105 137,0 90,0 € 203,90
460.4250 110 142,0 90,0 € 214,90
460.4255 115 148,0 90,0 € 225,90
460.4260 120 154,0 90,0 € 248,90
AXLE NUT WRENCH, LONG

• 6 point
mm mm mm mm
460.0005 30 45,0 90,0 40,0 € 25,90
460.0010 32 48,0 90,0 40,0 € 25,90
460.0015 33 49,0 90,0 40,0 € 25,90
460.0020 34 50,0 90,0 40,0 € 25,90
460.0025 35 51,0 90,0 40,0 € 31,90
460.0030 36 53,0 90,0 40,0 € 31,90
460.0035 38 55,0 90,0 40,0 € 31,90
460.0040 41 59,0 90,0 40,0 € 36,90
460.0045 46 64,0 90,0 40,0 € 36,90

31.12.2022

• 8-point
• For machinery usage Spanner width Ø Height Depth
• Special tool steel mm mm mm mm
460.2650 100 127,0 77,0 40,0 € 191,90
460.2655 105 132,0 77,0 40,0 € 197,90
460.2660 110 141,0 73,0 40,0 € 248,90
460.2665 115 146,0 73,0 40,0 € 259,90
460.2670 120 143,0 73,0 40,0 € 276,90
460.2675 125 153,0 77,0 40,0 € 333,90
460.2680 130 158,0 77,0 40,0 € 333,90
460.2685 135 168,0 73,0 40,0 € 333,90
460.2690 140 173,0 73,0 40,0 € 350,90
460.2695 145 178,0 73,0 40,0 € 356,90
460.2700 150 184,0 73,0 40,0 € 378,90
460.2705 155 189,0 73,0 40,0 € 401,90
460.2710 160 194,0 73,0 40,0 € 424,90
460.2715 165 199,0 73,0 40,0 € 441,90
mm mm mm mm 460.2720 170 205,0 73,0 40,0 € 452,90
460.2755 70 90,0 77,0 40,0 € 141, 90
460.2725 175 210,0 73,0 40,0 € 475,90
460.2760 75 95,0 77,0 40,0 € 141,90 460.2730 180 215,0 73,0 40,0 € 480,90
460.2765 80 99,0 73,0 40,0 € 146,90 460.2735 185 221,0 73,0 40,0 € 492,90
460.2770 85 104,0 73,0 40,0 € 180, 90
460.2740 190 226,0 73,0 40,0 € 520,90
460.2775 90 112,0 77,0 40,0 € 186,90 460.2745 195 232,0 73,0 40,0 € 548,90
460.2780 95 115,0 73,0 40,0 € 191, 90
460.2750 200 237,0 73,0 40,0 € 571,90

• 6 point
mm mm mm mm
460.0240 100 137,0 71,0 40,0 € 169,90
460.0245 105 142,0 71,0 40,0 € 174,90
460.0250 110 148,0 71,0 40,0 € 186,90
460.0255 115 154,0 71,0 41,0 € 208,90
460.0260 120 158,0 71,0 41,0 € 231,90
460.0265 125 165,0 71,0 41,0 € 288,90
460.0270 130 170,0 71,0 41,0 € 288,90
460.0275 135 175,0 71,0 41,0 € 299,90
460.0280 140 180,0 71,0 40,0 € 299,90
460.0285 145 178,0 71,0 40,0 € 333,90
460.0290 150 195,0 71,0 41,0 € 333,90
460.0295 155 200,0 71,0 41,0 € 361,90
460.0305 160 210,0 71,0 41,0 € 378,90
460.0310 165 200,0 71,0 41,0 € 407,90
mm mm mm mm 460.0315 170 220,0 71,0 41,0 € 418,90
460.0205 70 95,0 71,0 40,0 € 110,90 460.0320 175 225,0 71,0 41,0 € 429,90
460.0215 75 98,0 71,0 40,0 € 118, 90
460.0325 180 230,0 71,0 41,0 € 446,90
460.0220 80 104,0 71,0 40,0 € 129,90 460.0330 185 238,0 71,0 41,0 € 480,90
460.0225 85 111,0 71,0 40,0 € 135,90 460.0335 190 245,0 71,0 41,0 € 492,90
460.0230 90 116,0 71,0 40,0 € 141, 90
460.0340 195 250,0 71,0 41,0 € 520,90
460.0235 95 122,0 71,0 40,0 € 157,90 460.0345 200 255,0 71,0 41,0 € 548,90

31.12.2022
5
460.4190 460.3730
AXLE NUT SOCKET FOR DAF WRENCH WITH 6 PINS FOR DAF
• Internal square drive to DIN 3121 / ISO 1174 • Internal square drive to DIN 3121 / ISO 1174
• 6 point • High accuracy of fit
• Any extensive slipping is avoided • Special profile with 6 internal studs
• Extremely robust version • Extremely robust version
• Suitable for high tightening and loosening torque • Suitable for high tightening and loosening torque
• Can be used with an impact wrench or torque wrench • Special tool steel
• Chrome molybdenum
Application range: DAF LF45 rear axle
Application range: DAF (CF) EURO 5 drive axle nut
259,90 € 146,90 €
Spanner width D Height H D1 D2 D3 Number of B T
mm mm mm mm mm mm mm studs mm mm
120,0 158,0 106,0 87,0 109,0 98,0 86,0 6 10,5 20,0
460.1085 460.4450
WRENCH WITH 6 PINS FOR DAF AXLE NUT WRENCH WITH 2 PINS FOR FUSO
• High accuracy of fit • with 2 external pins, Ø 9.5 mm
• Special profile with 6 internal studs • High accuracy of fit
• Special tool steel • Special tool steel
Application range: DAF CF85 transmission (EURO 4 and EURO 5) Application range: IsuzuFuso Canter 3.5 tons
107,90 € 82,90 €
Height D1 D2 D3 Number of B Ø Number of Internal stud Ø Length
mm mm mm mm studs mm mm studs mm mm
55,0 91,0 74,0 66,0 6 6,7 86 2 9,5 68,0

31.12.2022
460.4295 450.0230
AXLE NUT WRENCH WITH 2 PINS FOR FUSO AXLE NUT WRENCH FOR HINO
• Internal square drive to DIN 3121 / ISO 1174 • For the dismantling and assembly of HINO axle nuts
• with 2 external pins, Ø 9.5 mm • For 11.9 t axles
• High accuracy of fit • 8-point
• Extremely robust version • Extremly versatile
• Suitable for high tightening and loosening torque • Suitable for exact torque with a 3/4” square drive
• Special tool steel • For machinery usage
Application range: Fuso Canter 3.5 tons, Isuzu 7.5 tons
231,90 €
Spanner width Ø Height
mm mm mm
105,0 125,0 85,0
460.4170
AXLE NUT IMPACT SOCKET FOR IVECO
• 12 point
104,90 €
Ø Number of Internal stud Ø Length

mm studs mm mm
100 2 9,5 68,0
460.4385
AXLE NUT WRENCH FOR FUSO REAR AXLE
• quick-action pin drive
• 8-point
• Extra long execution
129,90 €

mm mm mm
85,0 83,0 58,0
460.5333
AXLE NUT WRENCH FOR IVECO
• 6 point
Application range: Iveco Euro Cargo HA
412,90 € 208,90 €
Spanner width Ø Height Spanner width Ø Height
mm mm mm mm mm mm
120 142 360,0 90 117 69,0

31.12.2022
7
460.1040 450.0203
AXLE NUT WRENCH FOR IVECO AXLE NUT WRENCH FOR IVECO WITH GUIDE COLLAR
• Six sided drive 36 mm • Six sided drive 36 mm
• 6 point • Positive drive of the axle nut
• Any extensive slipping is avoided • Any extensive slipping is avoided
• Extremely robust version • Milled out profile
• Suitable for high tightening and loosening torque • Sturdy design
• Can be used with an impact wrench or torque wrench • Can be used with an impact wrench or torque wrench
Application range: Iveco Euro Cargo Application range: Iveco Eurotech Cursor HA etc.
203,90 € 276,90 €
Spanner width External hexagon Ø Height Spanner width External hexagon Ø Height
mm drive in mm mm mm mm drive in mm mm mm
98,0 36 122,0 115,0 110,0 36 133,0 116,0
450.0200 460.5340
AXLE NUT WRENCH FOR IVECO GROOVED NUT SPANNER SET WITH GUIDE TUBE FOR MAN 2
• Six sided drive 36 mm • Internal square drive to DIN 3121 / ISO 1174 pcs
• Positive drive of the axle nut • including threaded guide tube
• Any extensive slipping is avoided • High accuracy of fit
• Milled out profile • Extremely robust version
• Sturdy design • Suitable for high tightening and loosening torque
Application range: MAN planetary hub rear axles (5MR, 3MR) and front axle (M series: 3ME DI)
Application range: Iveco Euro Cargo etc.
220,90 €
Spanner width External hexagon External Ø Height Depth
259,90 €
mm drive in mm mm mm mm
98,0 36 122,0 120,0 72,0
460.4165 460.5350
AXLE NUT SOCKET FOR IVECO GROOVED NUT SPANNER SET WITH GUIDE TUBE FOR MAN 2
• Six sided drive 36 mm • Internal square drive to DIN 3121 / ISO 1174 pcs
• 12 point • Screw-in guide tube
• Any extensive slipping is avoided • High accuracy of fit
Application range: Mercedes and MAN, Atego, bus and transporter with grooved nut (A9763560026). The
Application range: Axle nut Iveco Eurotech-Cursor guide tube is not required for the following vehicles: MAN trucks (type H, L, M, N and 1) and bus (type A, J, P
and R) with grooved nut (81.90620-0086)
203,90 €
Spanner width External hexagon Ø Height
259,90 €
mm drive in mm mm mm
105,0 36 128,0 116,0

31.12.2022
460.5345 460.5355
WRENCH WITH 6 PINS FOR MAN GROOVED NUT SPANNER SET WITH GUIDE TUBE FOR MAN 2
• Internal square drive to DIN 3121 / ISO 1174 • Internal square drive to DIN 3121 / ISO 1174 pcs
• High accuracy of fit • including threaded guide tube
• Extremely robust version • High accuracy of fit
• Suitable for high tightening and loosening torque • Extremely robust version
• Special tool steel • Suitable for high tightening and loosening torque
Application range: MAN VW2-VW4-VW6.1-6.8
Application range: MAN Hypoid rear axles M-series (16M-Soma axle, HY-0855, HY-0955, HY-1175)
146,90 € 220,90 €
Internal Ø External Ø Number of Stud width Height
mm mm studs mm mm
77,0 84,0 6 10,0 100,0 450.0161
EXPANDER SLEEVE FOR LOCATION TUBE
• Practical connector system with bayonet clasp
450.0160 • Suitable for groove nut spanner 450.0160
• Enables stable work position
WRENCH WITH 6 PINS FOR MAN AND MERCEDES • Prevents slippage of the socket
• Internal square drive to DIN 3121 / ISO 1174 • Extremely robust version
• Rigid locating tube • Switched by turning the bayonet clasp
• Optional with expander sleeve (bayonet locking system) • Special tool steel
Application range: Mercedes Atego Rear axle, Vitaro 814, MAN etc.
84,90 €
231,90 €
Internal Ø External Ø Length
mm mm mm
49,0 57,0 130,0
Internal Ø External Ø Locating tube Number of Internal stud Ø Stud width Height
mm mm Ø mm studs mm mm mm
80,0 95,0 49,0 6 87,0 10,0 185,0 LOCATING TUBE FOR GROOVE NUT SOCKETS
• Practical connector system with fixing screw
• Usably for different groove socket nuts (module systems)
• Enables stable work position
450.0168 • Prevents slippage of the socket
WRENCH WITH 6 PINS FOR MAN AND MERCEDES
• Change through loosening of the grub screw on the hexagon
• Internal square drive to DIN 3121 / ISO 1174 • Special tool steel
• Optional with sleeve locating tube
Application range: Mercedes and MAN 10 + 13 t Reduction axle, Hypoid- and Trailer axle NR 7/4, Omnibus
0305 G + 0405 G etc.
288,90 € Internal Ø
mm
External Ø
mm
Length
mm
External Ø Internal Ø D3 Number of Stud width Height Depth
mm mm mm studs mm mm mm 450.0150 46,0 52,0 140,0 € 99,90
115,0 95,0 101 6 6,0 111,0 49,0 450.0152 60,0 67,0 140,0 € 118,90

31.12.2022
9
450.0169
WRENCH WITH 6 PINS FOR MERCEDES AND MAN
• Extremly versatile
• Suitable for exact torque
• Special profile with 6 internal studs
Application range: Mercedes + MAN drive axle
External Ø Internal Ø D3 Number of B T Height

mm
119,0
mm
110,0
mm
100,5
studs
6
mm
11,5
mm
11,6
mm
80,0 169,90 €
450.0170 460.5360
WRENCH WITH 6 PINS FOR MAN GROOVED NUT SPANNER SET WITH 2 GUIDE TUBES FOR MAN 3
• Six point size 60 mm • including threaded guide tubes
• High accuracy of fit • High accuracy of fit
Application range: MAN TGA Front axle, V9-82L-01(Disk brake/ABS) etc. Application range: MAN with guide tube Ø 66.5 mm: Hypoid rear axles F-series (HY-1175, HDY-1175, HY-
13110, HY-1180). With guide tube Ø 51.5 mm: Rear hub axles F-series (H7, HD7) and front axles F-series
Ø 102 mm
177, 90 M56 x 1,5 mm

€ Ø 51,5 mm M56 x 1,5 mm
Ø 66,5 mm
Internal Ø External Ø Number of Internal stud Ø Stud width Height
305,90 €
mm mm studs mm mm mm
101,0 110,0 6 93,0 8,0 80,0
450.0175 450.0176
MAN TGA GROOVE NUT SPANNER WITH LOCATING TUBE SLOTTED NUT WRENCH WITHOUT GUIDE TUBE FOR MAN TGA
• Six point size 60 mm • Six point size 60 mm
• Optional with locating tube • With fixed locating tube
Application range: MAN TGA rear axle, HY-1350 (Hypoid) Application range: MAN TGA rear axle, HY-1350 (Hypoid)
304,90 € 378,90 €
6-point D1 D2 D3 D4 Number of B H1 H2 6-point D1 D2 D3 Number of B H1
mm mm mm mm mm studs mm mm mm mm mm mm mm studs mm mm
60 148,0 133,0 117,0 67,0 6 11,5 98,0 160 60 148,0 133,0 117,0 6 11,0 110,0

31.12.2022
450.0155 EXTENSION TUBE FOR MERCEDES AND MAN
EXTENSION TUBE FOR MAN • With hexagon drive SW 41
• For the removal and installation of wheel hubs
• For the removal and installation of wheel hubs
• For the protection of the wheel bearing and threaded bolts
• Extension tube for the protection of the wheel bearing and threaded bolts
• Suitable for right and left handed threads
• With knurling and bore for toggle lever
Application range:
Application range: MAN TGA rear axle e.g. HY 1350
Right handed thread = rear axle HL2 e.g. MAN L serie
Left handed thread = Mercedes Atego/Vario
197,90 € Thread 6-point

mm
Internal Ø
mm
External Ø
mm
Length
mm
Internal Ø External Ø Length
Thread mm mm mm 450.0156 M75 x 1.5 41 60,0 78,0 180,0 € 174,90
M100 x 1.5 96,0 105,0 360,0 450.0157 M75 x 1.5 L 41 60,0 78,0 180,0 € 174,90
460.1035 460.0965
AXLE NUT SOCKET FOR MERCEDES AXLE NUT SOCKET FOR MERCEDES
• Six sided drive 36 mm • Six sided drive 36 mm
• 6 point • 12 point
• Any extensive slipping is avoided • Any extensive slipping is avoided
• Can be used with an impact wrench or torque wrench • Can be used with an impact wrench or torque wrench
Application range: Mercedes axle trailers etc. Application range: Mercedes axle trailers etc.
248,90 € 248,90 €
Spanner width 6-point Ø Height Spanner width 6-point Ø Height
mm mm mm mm mm mm mm mm
95,0 36 118 158,0 95,0 36 126,0 157,0
460.5615 460.5370
AXLE NUT WRENCH FOR MERCEDES T-NUTS AND WRENCH SET WITH 4 GUIDE TUBES FOR MERCEDES 5
• 6-round profile • including threaded guide tubes
Application range: Mercedes Truck- VA- and Discos Trailer (05.2000) with compact storage HUB Unit Application range: Mercedes Hypoid rear axles HL2/2, HL2/3, HL2/5, HL2/9, HL2/11, HL2/12, HL2/15, HL0/3,
HL0/6, HL0/7, HL1/2 (only Ø 63 mm required), HL1/3, HL1/8, HL1/9, HL2/30C
197,90 € Ø 63 mm
M36 x 1,5 mm
Ø 43 mm
M36 x 1,5 mm M36 x 1,5 mm M36 x 1,5 mm
Ø 40,5 mm Ø 36 mm Ø 42 mm
316,90 €
mm mm mm
95 118 75,0

31.12.2022
11
460.5620 460.5385
GROOVED NUT SPANNER SET WITH 3 GUIDE TUBES FOR MERCEDES 4 T-NUTS AND WRENCH SET WITH 4 GUIDE TUBES FOR MERCEDES 5
• Internal square drive to DIN 3121 / ISO 1174 pcs • Internal square drive to DIN 3121 / ISO 1174 pcs
• including threaded guide tubes • including threaded guide tubes
Application range: Mercedes Hypoid rear axles HL2/2, HL2/3, HL2/5, HL2/9, HL2/11, HL2/12, HL2/15 Application range: Mercedes Hypoid rear axles HL2/14, KL2/16, KL4/1, HL4/16, HL4/17, HL4/23, HL4/28,
HL4/29, HL4/30, HL4/4, HL4/8, HD4/6G, HO4/2, HO4/18, NR4/4 and palloid front axles AL3/1, AL3/2, AL3/4,
AL3/7, AL3/8
Ø 63 mm
Ø 75 mm
M36 x 1,5 mm M48 x 1,5 mm
Ø 43 mm M36 x 1,5 mm Ø 51 mm M48 x 1,5 mm
Ø 40,5 mm M36 x 1,5 mm M48 x 1,5 mm M48 x 1,5 mm
Ø 36 mm Ø 43 mm Ø 44 mm Ø 48 mm
259,90 € 344,90 €
460.5625 460.5635
GROOVED NUT SPANNER SET WITH GUIDE TUBE FOR MERCEDES 2 GROOVED NUT SPANNER SET WITH 3 GUIDE TUBES FOR MERCEDES 4
• including threaded guide tube • including threaded guide tubes
Application range: Mercedes Hypoid rear axles HL0/3, HL0/6, HL0/7, HL1/2 (only Ø 63 mm necessary), Application range: Mercedes Hypoid rear axles HL2/14, KL2/16, KL4/1, HL4/16, HL4/17, HL4/23, HL4/28,
HL1/3, HL1/8, HL1/9, HL2/30C HL4/29, HL4/30, HL4/4, HL4/8, HD4/6G, HO4/2, HO4/18, NR4/4
Ø 75 mm
M48 x 1,5 mm
Ø 51 mm M48 x 1,5 mm
M48 x 1,5 mm
Ø 63 mm Ø 43 mm
Ø 48 mm
M36 x 1,5 mm
Ø 42 mm
146,90 € 276,90 €
460.5380 460.5630
GROOVED NUT SPANNER SET WITH GUIDE TUBE FOR MERCEDES 2 GROOVED NUT SPANNER SET WITH GUIDE TUBE FOR MERCEDES 2
• including threaded guide tube • including threaded guide tube
Application range: Mercedes Hypoid rear axles HL2/2, HL2/7, HL2/13 Application range: Mercedes Palloid front axles AL3/1, AL3/2, AL3/4, AL3/7, AL3/8
Ø 75 mm
Ø 71,5 mm M36 x 1,5 mm M48 x 1,5 mm
Ø 42 mm
231, 90
€
Ø 44 mm
186,90 €
31.12.2022
460.5395 460.1070
GROOVED NUT SPANNER SET WITH GUIDE TUBE FOR MERCEDES 2 GROOVE NUT WRENCH WITH 6 PINS WITH GUIDE TUBE FOR MERCEDES
• Internal square drive to DIN 3121 / ISO 1174 pcs • Internal square drive to DIN 3121 / ISO 1174
• including threaded guide tube • Rigid locating tube
Application range: Mercedes hypoid axles HO4/10, HO4/10DL, HO4/11DL, HO5/3, HO5/4, HO5/8, HD4/21G, Application range: Mercedes lifting axle
HD4/2G, HD4/22, HD5/3, HL5/2, HL5/6
276,90 €
Ø 88 mm M56 x 1,5 mm
D1 D2 D3 D4 Number of B H1 H2
Ø 57 mm
305,
mm mm mm mm studs mm mm mm
90
€ 115,0 100,0 91,0 46,0 6 11,0 82,0 142,0
460.1075 460.5645
WRENCH WITH 6 PINS FOR MERCEDES GROOVED NUT SPANNER SET WITH GUIDE TUBE FOR MERCEDES 2
• High accuracy of fit • including threaded guide tube
• Extremely robust version • High accuracy of fit
• Suitable for high tightening and loosening torque • Extremely robust version
• Special tool steel • Suitable for high tightening and loosening torque
Application range: Mercedes hypoid axles HO 5/5
220,90 €
D1 D2 D3 Number of B H Ø 100 mm M56 x 1,5 mm
288,90 €
mm mm mm studs mm mm
Ø 59 mm
110,0 96,0 86,0 6 11,0 82,0
460.3790 460.5420
GROOVED NUT WRENCH WITH 6 PINS WITH GUIDE TUBE FOR MERCEDES GROOVED NUT SPANNER SET WITH 3 GUIDE TUBES FOR MERCEDES 4
TRAILER AXLES • Internal square drive to DIN 3121 / ISO 1174 pcs
• Internal square drive to DIN 3121 / ISO 1174 • including threaded guide tubes
• Rigid locating tube • High accuracy of fit
• High accuracy of fit • Extremely robust version
• Extremely robust version • Suitable for high tightening and loosening torque
• Suitable for high tightening and loosening torque • Special tool steel
Application range: Mercedes planetary hub rear axles (European axles) 10 tons + 13 tons: HL7/1, HL7/2,
Application range: Mercedes trailer axle TZ5/2 HL7/18, HO7/8, HO7/9, HL7/0, HL7/015, HL7/021, HL7/3, HD7/2,HD7/19DG, HD7/016DG planetary hub front
axle 7 tons: AL7/1
For the NR7/4 planetary hub axles / trailing axle, the base body can be used without a guide tube.
203,90 € M48 x 1,5 mm

Ø 53 mm Ø 105,5 mm
M48 x 1,5 mm
Ø 51 mm
D1 D2 D3 D4 Number of B H1 H2 M48 x 1,5 mm
367,90 €
mm mm mm mm studs mm mm mm Ø 50 mm
100,0 82,0 92,0 47,0 6 9,8 142,0 230,0

31.12.2022
13
450.0167 460.1065
WRENCH WITH 6 PINS FOR MERCEDES GROOVE NUT WRENCH WITH 6 PINS WITH GUIDE TUBE FOR MERCEDES
• Rigid locating tube • Rigid locating tube
Application range: Mercedes Actros Rear axle, HL/HL 8 (Hypoid) etc. Application range: Mercedes (2640) drive axle
305,90 € 293,90 €
Internal Ø External Ø Internal
stud Ø
Number of Stud width Height D1 D2 D3 D4 Number of B H1 H2
mm mm mm studs mm mm mm mm mm mm studs mm mm mm
105,0 125,0 115,0 6 10,0 182,0 145,0 125,0 116,0 64,0 6 11,0 84,0 145,0
460.5425 450.0251
GROOVED NUT SPANNER SET WITH 2 GUIDE TUBES FOR MERCEDES 3 SLOTTED NUT WRENCH FOR REAR AXLE NUT FOR MERCEDES
• Internal square drive to DIN 3121 / ISO 1174 pcs • With hexagon drive 32.0 mm
• including threaded guide tubes • For the dismantling and assembly of the rear axle nut
• Extremely robust version • Sturdy design
• Special tool steel • Drive tube Ø 35 mm
Application range: Mercedes rear axle 749.0, trailing rocker arm axle NS4/2, NS4/10 and pinion axles HL6/1,
HL6/2, HL6/3, HD6/3 Application range: Mercedes Citaro
M56 x 1,5 mm
Ø 55 mm
Ø 113 mm
M56 x 1,5 mm
Ø 63 mm
305,90 €
Internal Ø External Ø 6-point Internal Number of Stud width Height
356,
stud Ø
90 mm
€ 122,0 139,0 32 123,5 6 10,4 310,0
460.0870 460.4205
WRENCH WITH 6 PINS FOR MERCEDES AXLE NUT SOCKET SPANNER FOR MERCEDES
• ideally suited for loosening the rear nut on the differential • Internal square drive to DIN 3121 / ISO 1174
• Internal square drive to DIN 3121 / ISO 1174 • 8-point
• Extremly versatile • High accuracy of fit
• Suitable for exact torque • Extremely robust version
• Special profile with 6 internal studs • Suitable for high tightening and loosening torque
• Suitable for high tightening and loosening torque • For machinery usage
Application range: Axle nut rear axle Mercedes 2636, 2640, 414 (2006 - 2016)
220,90 € 197,90 €
D1 D2 D3 Number of B Height D1 D2 D3 Number of B Height
mm mm mm studs mm mm mm mm mm studs mm mm
135,0 126,0 102,0 6 8,7 103,0 121,0 107,0 98,0 6 12,0 82,0

31.12.2022
450.0201
AXLE NUT WRENCH FOR SAF
• Six sided drive 36 mm
• Positive drive of the axle nut
• Milled out profile
• Sturdy design
Application range: SAF axle trailers
Spanner width 6-point Ø Height

mm
85,0
mm
36
mm
118,0
mm
82,0 197,90 €
460.5445
AXLE NUT WRENCH FOR RENAULT
• 6 point
174,90 €
Spanner width Length
mm mm
77 200,0
460.5455 450.0110
AXLE NUT WRENCH FOR RENAULT AND IVECO AXLE NUT WRENCH FOR SAF
• Internal square drive to DIN 3121 / ISO 1174 • Positive drive of the axle nut
• 6 point • Sturdy design
• High accuracy of fit • Can be used with an impact wrench or torque wrench
• Extremely robust version • Ideally suited for brake restoration working
• Suitable for high tightening and loosening torque • Forward tension with SW 32 mm is at 150 Nm
• Special tool steel • Angle of rotation 20-30° with SW 46
Application range: SAF Euro axle etc.
197,90 € 158,90 €
Spanner width Ø Height Spanner width 6-point Height
mm mm mm mm mm mm
80 100 137,5 140,0 32 100,0

31.12.2022
15
460.4705 450.0220
WHEEL HUB PULLER SET FOR SAF 2 AXLE NUT WRENCH FOR SCANIA
• For 140 mm hole diameters pcs • With hexagon drive 41.0mm
• Sturdy design • 8-point
• Threaded spindle for high pull-off force - 32 mm drive • Positive drive of the axle nut
• Special tool steel • Any extensive slipping is avoided
• Sturdy design
Application range: Scania front axle (e.g. 124L / 144L), Series 4 from 96 for vehicles above 16 t, removal and
fitting of the axle nuts in front of the brake disc
129,90 € 129,90 €
Spanner width 6-point Ø Height Depth
450.0221 mm mm mm mm mm
AXLE NUT WRENCH FOR SCANIA 80 41 105,0 98,0 25,0

• for mounting and dismounting Scania axle nuts
• 8-point 460.0425
• Extremely robust version AXLE NUT WRENCH FOR SCANIA, YORK AND FUSO
• Suitable for high tightening and loosening torque • Internal square drive to DIN 3121 / ISO 1174
• For machinery usage • 8-point
• Special tool steel • High accuracy of fit
Application range: Scania front axle (e.g. 124L / 144L) Series 4 • Suitable for high tightening and loosening torque
from 1996 for vehicles from 16 t Mounting and dismounting • Special tool steel
the axle nut in front of the brake disc
Application range: Scania, York and Fuso 10.5 t
125,90 € 141,90 €
Spanner width Ø Height Depth Spanner width Ø Height
mm mm mm mm mm mm mm
80 98,0 75,0 25,0 95,0 117,0 82,0
460.1365 460.1370
AXLE NUT WRENCH FOR SCANIA AXLE NUT WRENCH FOR SCANIA
• for mounting and dismounting Scania axle nuts • for mounting and dismounting Scania axle nuts
• 8-point • 8-point
• For machinery usage • For machinery usage
Application range: Axle nut Scania and Fuso front axle Application range: Removal and installation of the axle nut of Scania rear axle
110,90 € 141,90 €
Spanner width Ø Height Spanner width Ø Height
mm mm mm mm mm mm
80,0 103,0 94,0 100,0 123,0 84,0

31.12.2022
460.1745 AXLE NUT WRENCH WITH GUIDE TUBE FOR VOLVO
NUT WRENCH WITH 4 PINS FOR SCANIA • Internal square drive to DIN 3121 / ISO 1174
• 6 point
• Extra long execution
Application range: Volvo FH rear axle
Application range: Scania locknut 1338267
Spanner width External Ø Locating tube Height Depth
188, 90
€ 460.1415
mm
95,0
mm
125,0
Ø mm
60,0
mm
350,0
mm
40,0 € 367,90
D1 D2 D3 Number of B Height 460.0680 105,0 135,0 60,0 355,0 40,0 € 401,90
87,0 76,0 70,0 4 6,5 145,0
460.5440
AXLE NUT WRENCH FOR SETRA AND KÄSSBOHRER
450.0236 • Six sided drive 36 mm
8-PIN T-NUTS WRENCH FOR SCANIA • 6 point
• With 3/4“ square drive to DIN 3121 / ISO 1174 • Extremely robust version
• Special profile with 8 external studs • Suitable for high tightening and loosening torque
• Positive drive of the axle nut • Special tool steel
• Sturdy design
Application range: Scania 420 (heavy duty tipper axis) removal and
installation of the mounting nut on the axle bearing
339,90 €
238,90 € Spanner width External
mm hexagon
Length
mm
D1 D2 D3 Number of B Height Depth 105 36 mm 400,0
mm mm mm studs mm mm mm
119,0 90,0 103,0 8 9,5 100,0 75,0
CLAMP NUT SOCKET
450.0245 • For professional loosening and tightening
AXLE NUT WRENCH FOR VOLVO • Rectangular form
• Internal square drive to DIN 3121 / ISO 1174 • Usably with rectangular clamp nuts on the axle stub
• 6 point • Milled out profile
• Slim design • Suitable for high tightening and loosening torque
• Sturdy design • For machinery usage
• Positive drive of the axle nut • Special tool steel
Application range: Axle nut Volvo FH front axle cover, steering pin (e.g. FM 12)
Spanner width mm Height

mm
460.5470 32,0 36,0 € 73,90
124,90 € 460.5471
460.5472
41,0
46,0
50,0
52,0
€
€
73,90
84,90
mm mm mm mm 460.5473 50,0 62,0 € 93,90
80 100,0 55,0 17,0 460.5474 56,0 68,0 € 99,90

31.12.2022
17
CLAMP NUT SOCKET

• For professional loosening and tightening
• Rectangular form
• Usably with rectangular clamp nuts on the axle stub
Spanner width mm Height

mm
450.0106 56,0 76,0 € 110,90
450.0107 60,0 76,0 € 135,90
150.1467
THREAD BOTTOM TAP FOR EXTERNAL THREAD M4 - M45
• For re-cutting and cleaning damaged outer threads
• No damage of the thread
• Suitable for right and left-handed thread
• steplessly adjustable via knurled screw
• The chaser is well-guided due to the width of the jaw and does not tilt
• Can be used everywhere regardless of the thread length
• Simple handling
• cutting of HSS steel with hardness 55-60
56,90 €
150.1435
THREAD REPAIR KIT FOR INTERNAL AND EXTERNAL THREADS 6
• For re-cutting and cleaning of internal and external threads pcs
• Suitable for right and left handed threads up to Ø 140mm
• Quick cutting jaw modification possible from the magazine
• No damage of the thread due to the soft holding guides
• With 3 x die for commercial vehicle hub nut threads
• In durable plastic storage case
Chaser metric: 1.0 - 1.25 -1.5 -1.75 -2.0 -2.5 -3.0 -3.5 mm
Chaser imperial: 24-20-18-16-14-12-11.5-11-10-9-8-7.5-7-6-5-4 pitch
Thread file metric 0.8-1.0-1.25 -1.5-1.75-2.0-2.5-3.0 mm
Thread file, imperial 24-20-18-16-14-12 -11-10
Die: M18x1.5 / M20x1.5 / M22x1.5
Application: Trucks, land and construction machines, municipally and forestery technology on e.g. axle threads,
hydraulic cylinder screw joints, steering and push rods
367,90 €
31.12.2022
460.3700 460.0685
UNIVERSAL COMMERCIAL VEHICLE WHEEL HUB EXTRACTOR SET 5 WHEEL HUB PULLER FOR MAN 2
• variable use for bolt circle diameters up to 190 mm pcs • Suitable for removing the wheel hub pcs
• Sturdy design • For 166 mm hole diameters
• Trapezoidal threaded spindle for high pull-off force • Sturdy design
• Special tool steel • Trapezoid thread spindle for high removal power - drive 30 mm
Application range: new MAN front axle wheel hub
Ø 166 mm
401,90 € 514,90 €
460.1765
UNIVERSAL COMMERCIAL VEHICLE WHEEL HUB EXTRACTOR SET 27
• Variable use for bolt circle diameter 110 mm - 448 mm pcs
• Universal use for bolts up to max. Ø 30 mm
• With 2 rods and trapezoid thread spindle
• With 3 pressure pieces
• Includes 5 thread adaptor sets
Application range: Sauer, BPW, Scania, Fuso, Hino
1029,90 €
UNIVERSAL WHEEL HUB PULLER
• Extracting the wheel hubs and/or housing over the grease cap thread
• Six sided drive enable unscrewing on the cap
• Sturdy design
• Trapezoid thread spindle for high removal power - drive 30 mm
Size internal Size outside Spindle size Spanner width

thread thread mm mm
450.0000 M115 x 1,5 30x260 30 € 271,90
450.0001 M125 x 2,0 30x260 30 € 305,90
450.0002 M135 x 2,0 30x260 30 € 305,90
450.0003 M136 x 2,5 30x260 30 € 316,90
450.0004 M155 x 3,0 30x260 30 € 333,90

31.12.2022
19
460.3630 460.1080
WHEEL HUB PULLER SET FOR MAN 3 WHEEL HUB PULLER FOR SCANIA 3
• including 20 t hydraulic cylinder pcs • With pressure plate for support pcs
• Sturdy design • Sturdy design
• Special tool steel • Trapezoid thread spindle for high removal power - drive 30 mm
max.
20t
Application range: Scania (310 / 320) rear axle wheel hub
1189,90 € 390,90 €
460.3795
ASSEMBLY AND DISASSEMBLY TOOL SET FOR ZF AXLES 11
• ideally suited for mounting and dismounting wheel hubs with compact bearings pcs
• can also be used with fixed wheel hubs
• for damage-free mounting of the shaft sealing rings
• for mounting the bellows with installed brake calliper
Application range: IF axles
1529,90 €
31.12.2022
440.0025 440.0480
PRESSURE AND PULL HYDRAULIC CYLINDER SET 32T 6 PRESSURE AND PULL HYDRAULIC CYLINDER SET 7
• Optimal for universal use in car garages pcs • Optimal for universal use in car garages pcs
• Suitable for both pressure and train uses • Suitable for both pressure and train uses
• With magnetic centring adapter • Extremely high and uniform power construction
• Extremely high and uniform power construction • Industrial execution with forged piston
• Industrial execution with forged piston max. • Pressure of the hydraulic cylinders can be combined with the impact body max.
32t 45t
• Pressure of the hydraulic cylinders can be combined with the impact body with impact force during use
with impact force during use • With automatic piston return
• Universal usage with reduction M10-M22 • Ideally used with transporters and commercial vehicles
• Ideally used with transporters and commercial vehicles • Special tool steel
• With automatic piston return
• In durable steel storage case
Technical data: Technical data:

Capacity: 32 t Capacity: 45 t
Connection thread: Cejn quick coupling Connection thread: Cejn quick coupling
Piston-inner thread: M24 Piston-inner thread: M27
Outer thread:
Stroke:
2.1/2”
113,0 mm 1244,90 € Outer thread:
Stroke:
2.1/2”
70,0 mm 1469,90 €
440.0060 440.0055
HYDRAULIC FOOT PUMP SET 4 PNEUMATIC HYDRAULIC PUMP SET 3
• For simply agent press cylinders pcs • Pneumatic working pcs
• Safety valve for overload protection • For simply agent press cylinders
• With automatic return • Safety valve for overload protection
• Includes hydraulic hose with quick coupling • With automatic return
• Includes hydraulic hose with quick coupling
ORIGINAL
ORIGINAL *CEJN® 390x260x680 mm 320x150x200 mm
*CEJN®
2,2 m
m
2,2
QUICK COUPLING -
DRIP FREE!
750 ml
1,4 L
OPTIONAL OPTIONAL
QUICK COUPLING -
440.0063 440.0063 DRIP FREE!
i i
769,90 € 832,90 €
31.12.2022
21
440.0063
MANOMETER
• With Cejn quick coupling for direct coupling to all KS Tools hydraulic pumps
• With easy-to-read scale in psi and bar
Caution: The maximum pressure values for the hydraulic cylinder

and given in the appropriate operator’s manual
Quick coupling -
drip free!
191,90 €
440.0585
HYDRAULIC UNIT 32 T, WITH HYDRAULIC PUMP AND MANOMETER 11
• Optimal for universal use in car garages pcs
• Includes hydraulic pump and manometer
• Suitable for both pressure and train uses
• With magnetic centring adapter
max.
• Extremely high and uniform power construction
32t
2,2 m
• Industrial execution with forged piston

• Pressure of the hydraulic cylinders can be combined
with the impact body with impact force during use
• Universal usage with reduction M10-M22
• Ideally used with transporters and commercial vehicles
750 ml
ORIGINAL *CEJN®
390x260x680 mm 2039,90 €
440.9996
HYDRAULIC UNIT 32-TONNES, WITH AIR HYDRAULIC PUMP 9
• Optimal for universal use in car garages pcs
• Suitable for both pressure and train uses
• With magnetic centring adapter
• Extremely high and uniform power construction
max.
• Industrial execution with forged piston
• Pressure of the hydraulic cylinders can be combined with the impact body with impact force during use
• With pneumatic hydraulic pump
QUICK COUPLING - 32t
• Universal usage with reduction M10-M22

• Ideally used with transporters and commercial vehicles
DRIP FREE!
• In durable steel storage case
m
2,2
ORIGINAL *CEJN®
OPTIONAL
440.0063
i 1,4 L
320x150x200 mm 2209,90 €
31.12.2022
440.0038 440.0036
KLANN HYDRAULIC TO KS MODULO 2-TOOL KS HYDRAULIC MODULO 2 TO KLANN TOOLS
• For using the Klann hydraulic cylinder (17 t) with KS Tools tool 1.1/2” internal thread • For use with the KS Tools hydraulic cylinder MODULO 2 (8.5-22 t) with Klann special tool
• Adapter 2.1/4”-14 UNS (Klann thread) to 1.1/2” MODULO 2 • Adapter 1.1/2” MODULO 2 to 2.1/4”-14 UNS (Klann thread)
2.1/4“-14 UNS 1.1/2“-11
2.1/4“-14 UNS
1.1/2“-11
61,90 € 61,90 €
440.0409 440.0034
KS HYDRAULIC MODULO 2 TO KLANN (COMMERCIAL VEHICLES-SPECIAL TOOLS) KS HYDRAULIC MODULO 2 TO SAUER, MÜLLER, KS MODULO 1 TOOLS
• For using the KS tools hydraulic cylinder MODULO 2 (32t) with the Klann special tool (connection 2.3/4”-16 • For use of the KS Tools hydraulic cylinder MODULO 2 (8,5-22 t) with Sauer-, Müller-, KS MODULO 1 special
UNS) tools
• Adapter 2.1/2” MODULO 2 to 2.3/4”-16 UNS (Klann thread) • Adapter 1.1/2” MODULO 2 to 2.1/4”-16 UN (Sauer, Müller, KS MODULO 1)
2.1/2“ 1.1/2“-11
2.1/4“-16 UN
2.3/4“-16 UNS
67,90 € 61,90 €
440.0407 440.0408
PASCHKE HYDRAULIC TO KS MODULO 2 TOOLS KS HYDRAULIC TO PASCHKE TOOLS
• For using the Paschke hydraulic cylinder with KS Tools special tools MODULO 2 • For using the Paschke KS Tools hydraulic cylinder MODULO 2 (8,5-22 t) with Paschke special tools
• Adapter M68x2 mm (Paschke thread) to 1.1/2” MODULO 2 • Adapter 1.1/2“ MODULO 2 auf M68x2 mm (Paschke thread)
M68x2
1.1/2“-11
M68x2
1.1/2“-11
93,90 € 67,90 €
440.0037
KS HYDRAULIC MODULO 2 TO KS COMMERCIAL VEHICLES-SPECIAL TOOLS
• For use with hydraulic cylinder MODULO 2 (16 and 22 t) to KS Tools tools MODULO 2 with 2.1/2“ thread
• Adapter 1.1/2“ MODULO 2 to 2.1/2“ thread MODULO 2 (large traverse - commercial vehicles)
1.1/2“-11
2.1/2“-11 UN
36,90 €
31.12.2022
23
440.0590 440.0490
WHEEL HUB PULLER SET FOR 8 AND 10 BOLTS FOR 32 T 11 PULLER SET FOR HUB WITHOUT WHEEL STUD RIM FOR 32 T 3
• for disassembly of truck wheel hubs with 8 or 10 bolts (275 mm / 335 mm) pcs • for the effective pressing out of firmly rusted bearings with external hubs of straight shafts pcs
• Use in conjunction with 32t hydraulic cylinder (440.0025) with impact function • Minimum work time
• ideal for pressing out wheel hub with compact bearing • Secure and easy to use
• Sturdy design • Special tool steel
• Secure and easy to use max.
32t
• ideal for use with wheel bearing set for Scania (440.0375) Recommended hydraulic cylinder: 32 t (440.0025)
• In durable plastic storage case Application range: Mercedes Atego, Actros, MAN TGA, TGS, TGX, Volvo FL, Renault Kerax, Magnum, Midlum,
Premium and all brands with the same bolt arrangement
Recommended hydraulic cylinder: 32t (440.0025)
548,90 €
440.0495
HUB PULLERS FOR LOW TRAILERS FOR 32 T AND 45 T 15
pcs
1244,90 €
• for pressing out the 225 mm hub with 10 screws
• Hubs with unit bearings on straight shafts can be released in this way
• Use in connection with threaded plate (440.0593)
• Sturdy design
• Secure and easy to use
440.0365 • Special tool steel
SPACER SCREW M22 FOR WHEEL HUB PULLER SET (440.0590) Recommended hydraulic cylinder: 32 t (440.0025) and 45 t (440.0480)
• for extending the pressure rod
• ideal for axles with hub planetary gear in the wheel hub
Article can only be used in
110, 90 conjunction with 440.0593.

€
440.0610
WHEEL HUB PULLER SET FOR 8 AND 10 BOLTS FOR 45 T
• for disassembly of truck wheel hubs with 8 or 10 bolts (275 mm / 335 mm)
12
pcs
786,90 €
• Use in conjunction with 45t hydraulic cylinder (440.0480) with impact function
• ideal for pressing out wheel hub with compact bearing 440.0615
• Sturdy design
• ideal for use with wheel bearing set for Scania (440.0375)
max.
45t
PULLER SET FOR HUB WITHOUT WHEEL STUD RIM FOR 45 T 3
• for the effective pressing out of firmly rusted bearings with external hubs of straight shafts pcs
• Minimum work time
Application range: Mercedes Atego, Actros; MAN TGA, TGS, TGX; Volvo FL; Renault Kerax, Magnum, Midlum,
Premium and all brands with the same bolt arrangement
1244,90 € 514,90 €
31.12.2022
450.0080 605.0005
BEARING ASSEMBLY AND DEASSEMBLY TOOL SET 5 SEPARATOR SET INCLUSIVE WITH YOKE Ø 30,0 - 220,0 MM 3
• Can be used manually with a hammer or workshop press pcs • For the removal of secure bearings and bushes pcs
• Optimal placing through the pressure plates • Extremely robust spindle with inductively hardened thread
• For easy and damage free assembly • Hydraulic thrust spindle available
• For the correct dismantling and assembly of bearings • Special tool steel
• Suitable for commercial, agricultural engineering and construction machines • In durable steel storage case
• Forged, robust execution
429,90 € 1064,90 €
460.1380
MAN WHEEL BEARING PULLER 10
• Ideally suited to the removal of old wheel bearings pcs
• Sturdy design
Application range: MAN 33460, 410 and 414 -break disc bearing front axle
30 mm
Ø 108 mm
860,90 €
31.12.2022
25
WHEEL BEARING INSTALLATION AID FOR DAF 460.4135

• Ideally suited for mounting the wheel bearing and the sealing ring on the front axle
• Facilitates installation due to constant force
WHEEL BEARING MOUNTING KIT FOR SCANIA 2
• For mounting the inner wheel bearing on the rear axle pcs
• time- and cost-efficient
• Extra heavy and solid execution
• Including adapter ring
Application range: DAF CF
D1 D2 D3 H1 H2
mm mm mm mm mm
460.4375 61,5 69,5 124,5 22,6 35,0 € 82,90
460.4370 73,5 81,5 137,5 22,6 35,0 € 84,90
460.4380 91,5 99,5 147,5 22,6 35,0 € 93,90
WHEEL BEARING INSTALLATION AID FOR VOLVO 339,90 €

• Ideally suited for mounting the wheel bearing and the sealing ring on the lift axle
• time- and cost-efficient 440.0375
WHEEL BEARING SET FOR SCANIA FOR 32T AND 45T 7
Application range: Volvo FM • For the assembly and disassembly of compact bearings on the front axle pcs
• ideal use with wheel hub puller set (440.0360) and 32t hydraulic cylinder
(440.0025 with impact function)
• Sturdy design
Recommended hydraulic cylinder: 32t (440.0025) and 45t (440.0480)
Application range: Wheel bearing front axle Scania
D1 D2 D3 H1 H2
mm mm mm mm mm
460.4005 51,0 58,0 109,0 21,0 34,0 € 56,90
WHEEL BEARING INSTALLATION AID FOR VOLVO

• Ideally suited for mounting the wheel bearing and the sealing ring on the front axle
Application range: Volvo FM
565,90 €
460.4130
WHEEL BEARING PULLER SET FOR SCANIA 14
• ideally suited for removing stuck wheel bearings pcs
D1 D2 D3 H1 H2 • Sturdy design
mm mm mm mm mm • Threaded spindle for high pull-off force - 30.0 mm drive
460.4000 61,0 68,0 124,0 21,0 34,0 € 61,90
Application range: Scania rear axle
WHEEL BEARING INSTALLATION AID FOR VOLVO

• Ideally suited for mounting the wheel bearing and the sealing ring on the rear axle
Application range: Volvo FM
D1 D2 D3 H1 H2
758,90 €
mm mm mm mm mm
460.3995 83,0 94,0 148,0 26,0 40,0 € 99,90

31.12.2022
460.3620
KINGPIN PRESS 75T WITH SET OF SLEEVES 29
• Suitable for quick insertion and removal of king pins pcs
• Ideal for cylindrical and conical bolts
• No removal of the axle required
• Press unit is 360° rotatable
• Open width 260 mm
• Swivelling, rotatable and with height adjustment for components that are difficult to access
• Including pneumatic hydraulic foot pump with quick lift, hydraulic cylinder, most common sleeves and pressure pieces
• Special and compact design
Ø 24 mm
Ø 34 mm
Ø 47 mm
Ø 47 mm
Ø 47 mm
Ø 39 mm Ø 50 mm Ø 61 mm Ø 95 mm
Technical data:
Capacity: 75 t
Stroke: 160,0 mm
Operating pressure max:
Volume:
700 bar
1,8 l 4990,00 €
31.12.2022
27
500.8480
INDUCTION HEAT GUN SET 6
• For loosening rusted and seized connections pcs
• For loosening “insoluble” glued connections
• Induction principle
• Pinpoint heating in seconds
• Heating of components up to max. 790 °C (red-hot)
Application range: Screws, nuts and bolts, exhaust clamps and pipes,
lambda probes, running gear, stuck bearings, ball joints, steering
(e.g. tracking adjustment screws), chemically micro-encapsulated threaded
connections (bonded), warming of bearing housings during dismantling and assembly
451,90 €
1.00
0 W
Ø 30 mm Ø 40 mm
160 mm 170 mm
750 mm
Ø 50 mm Ø 56 mm
160 mm 120 mm

31.12.2022
980.1010 980.1020
MANUAL LEVER GREASE GUN WITH FLEXIBLE TUBE SINGLE HANDED GREASE GUN WITH RIGID GREASE TUBE
• For 400g cartridges and buckets and/or also for loose grease • Perfect single handed usage
• Filling volume 500cm3 • For cartridges and buckets and/or also for loose grease
• Flexible tube • Fill capacity 400g
• Mirror polished • Rigid grease tube
• Mirror polished
36,90 € 36,90 €
Ø Length Capacity Ø Length Capacity
mm mm mm mm
57,0 370,0 400 g 57,0 350,0 400 g
980.1021
TWO-HAND GREASE GUN
• For working with grease up to NLGI2
• Grease gun piston diameter 10.0 mm
• Quick and easy cartridge replacement
• Clean and complete emptying of the cartridge
• Fill levels can be checked at all times
• Ergonomic anti-slip handle
Technical data:
Connection thread: M10 x 1,0
Operating pressure: 400 bar
Burst pressure system (bar): 850 bar
Burst pressure grease gun head (bar): 1200 bar
NLGI class: <2
Output per stroke cm³: 2,10
Length Hose length
82,90 €
mm mm Capacity
650,0 300,0 500 g
515.3900
PNEUMATIC GREASE GUN FOR STROKE BY STROKE CONVEYANCE OF GREASE
• Air exhaust through the handle
• For one handed operation with balanced ergonomic design
• For cartridges and buckets and/or also for loose grease
• Includes flexible hose and nozzle
• Includes 1/4” coupling connector
• Grease feeding: one stroke per trigger actuation
Technical data:
Output pressure: 260 bar
Connection thread: 1/4”PT
Output per stroke cm³: 1,30 cm³
Air consumption: 170 l/min
Operating pressure: 6,3 bar (90 psi)
Width Length
61,90 €
mm mm Capacity
165,0 400,0 400 g

31.12.2022
29
CORDLESS GREASE GUN 400 ML

• Handy and ergonomic dual component housing Technical data:
• For standard grease cartridges or direct filling
Operating pressure: 420 bar / 42 MPa
• Ideal for heavy greasing with counter pressure
• With flexible 750 mm filling tube NLGI class: <2
• Carbon brushes interchangeable Grease filling: 75 g / min
• High performance lithium-ion battery Capacity of the unit: 400 ml
• With a rechargeable battery that can be process up to 15 cartridges No load current: 3A
• Longer running time through higher load capacity
Operating current: 2,0 ~ 5,5 A
• Fast charging function (1 hour)
• Automatic turn off charging station Charging time: 1 hour
• In durable plastic storage case Rechargeable battery: 18 V - 4,0 Ah
Length Width Height Replacement Rechargeable Number of Number of

mm mm mm carbon brush battery batteries chargers
515.3559 237,0 80,0 487,0 515.3596 515.3599 0 0 € 282,90
515.3560 237,0 80,0 487,0 515.3596 515.3599 1 1 € 740,90
515.3561 237,0 80,0 487,0 515.3596 515.3599 2 1 € 928,90
FLEXIBLE HOSE WITH NOZZLE 980.1108

• Made from rubber
• Includes four-jaw nozzle QUICK-LOCK COUPLING FOR GREASE GUNS
• For use with the manually operated grease gun • Ideal for commercially available manual, battery operated and pneumatic grease guns
• Secure greasing during maintenance work without holding in place
• Uncoupling possible with pressures up to over 690 bar
• No spraying when uncoupling
• Simple and secure loosening, even under high pressure through lever actuation
Connection thread Length

mm
980.1011 1/8”PT 300,0 € 8,90
980.1012 1/8”PT 500,0 € 14,90
980.1014
36,90 €
NOZZLE EXTENSION
• Made from metal
• Includes four-jaw nozzle
• For use with the manually operated grease gun
Connection Length Height
thread mm mm
1/8”PT 74,0 38,0
980.1100
7
6,90 €
GREASE GUN ADAPTOR SET
• For standard hand, cordless and pneumatic grease guns pcs
• Adaptor with sliding sleeve for break-proof connection
• Straight and angled grease nipple
Connection Length • For grease nipples out of steel, brass and stainless steel
thread mm
1/8”PT 160,0 Application range: Cone, funnel, ball and flat grease nipples
980.1013
NOZZLE
• Made from metal
• Four-jaw nozzle
• For use with the manually operated grease gun
5,90 €
Connection
50,90 €
thread
1/8”PT

31.12.2022
BEARING LUBRICATION AID BRASS AND ALUMINIUM PUNCH

• Ideally suited to greasing the bearings • For extracting bearing, bolts and bushes etc.
• Residual grease is protected against dust and oxidation • Rimed handle for better control
• for different bearing diameters • Brass / Aluminium
• Permanently lockable
Application range: tapered roller bearings
Internal Ø Width Height

mm mm mm
Ø Length
460.4965 135,0 161,0 123,0 € 452,90 Material mm mm
460.4970 114,0 161,0 128,5 € 316,90 156.0415 brass 20,0 300,0 € 42,90
460.4975 160,0 161,0 130,0 € 429,90 156.0416 aluminium 30,0 300,0 € 25,90
460.1210 440.0190
BEARING LUBRICATION AID PRESS TOOL
• Ideally suited to greasing the bearings • Forged press tool for removing the ball joints and
• The grease is pressed through the rollers/barrels by pressing down on the piston stabiliser ball pins
• For 150-200 mm bearing diameter • Maximum force 16 t
• Permanently lockable • Ideal for use with a hydraulic cylinder
• With triple sealing against grease leaks • Optimally used with ball joint sets 440.0230 and
• Residual grease is protected against dust and oxidation 440.0240 as well as stabiliser ball pin set 440.0235
• Aluminium • Secure and easy to use
• Extremly versatile • Minimum work time
Recommended hydraulic cylinder:

8.5 t (440.0730), 14 t (440.0015),
16 t (440.0005), 22 t (440.0010)
735,90 €
Width Height
259,90 €
mm mm
240,0 240,0
440.0730 440.0015
PRESSURE AND PULL HYDRAULIC CYLINDER SET, 8.5T 4 SHORT-STROKE HYDRAULIC CYLINDER SET 14T 3
• For the assembly and disassembly of silent bearings, steering pin bolts, wheel bearings etc. pcs • For the assembly and disassembly of silent bearings, steering pin bolts, wheel bearings etc. pcs
• Can be used in the narrowest of spaces • With adjustable pressure rod
• With adjustable pressure rods and impact body • Maximum pressure with little effort
• With automatic piston return • Especially for use with press tool and press stand 440.0190 and 440.0180
• Special tool steel max. • With automatic piston return max.
8,5t 14t
Technical data: Technical data:

Capacity: 8.5 t Capacity: 14 t
Connection thread: Cejn quick coupling Connection thread: Cejn quick coupling
Piston-inner thread: M22 Piston-inner thread: M24
Outer thread:
Stroke:
1.1/2”
25,0 mm 463,90 € Outer thread:
Stroke:
1.1/2”
55,0 mm 495,90 €
440.0390
UNIVERSAL TOOL SET FOR CHANGING WHEEL BOLTS ON TRUCKS 8
• for quick and easy replacement of wheel bolts pcs
• on trucks and trailers
• Changing the wheel studs without hammer or physical exertion
• Bolt change in less than 30 seconds
• Used in conjunction with press clamp (440.0190) and 14t (440.0015) or 8.5t hydraulic cylinder 440.0730
503,90 €
31.12.2022
31
515.3880
VIBRO IMPACT PNEUMATIC CHISEL HAMMER SET 6
• With non slip soft grip handle pcs
• Ergonomic designed handle
• Ideal for industry
• Efficient, gentle loosening of screw fittings
• With stepless impact regulation
• Vibration dampened
• Cold insulated handle
• Includes 1/4” coupling connector
• Ultra light housing from two component plastic
369,90 €
150.1608
IMPACT TIE ROD TOOL
• Vibration supported release of tracking rods, contoured screws or screws in the axle area etc.
• Adjustable in connection with a pneumatic chisel hammer
• The special vibrating mandrel applies an impact pulse to the screw connection to be loosened,
thereby loosening rust and supporting the loosening process
• Pneumatic chisel adapter (10 mm) for use with pneumatic chisel hammers on the market
• Utilisation of vibration and shock pulse of Vibro Power pneumatic hammer
Width Length U opening

mm
50,0
mm
290,0
in mm
27,0 205,90 €
515.3884 515.3961
VIBRO-IMPACT BALL JOINT RELEASER VIBRO-IMPACT PUNCH
• Vibration supported release on ball joints • Suitable for use with industry-standard percussion hammers (10.0 mm holder)
• Adjustable, e.g. conical seat connections to wheel bearing houses and wishbones • Universal use for bodywork and chassis repair
• Pneumatic chisel adapter (10 mm) for use with pneumatic chisel hammers on the market • Extension of the working range
• Utilisation of vibration and shock pulse of Vibro Power pneumatic hammer • Utilisation of vibration and shock pulse of Vibro Power pneumatic hammer
• Special tool steel • Robust chisel forged out of one piece
Application: Cutting exhausts, loosening of ball joint, extracting bolts and cutting metal sheets
56,90 € 25,90 €
Width Height Length Drive Ø Length Drive in
mm mm mm mm mm mm
40,0 130,0 68,0 Ø 10 mm 6,5 177,0 10 mm

31.12.2022
VIBRO-IMPACT EXHAUST CHISEL VIBRO-IMPACT SEPARATING FORK

• Suitable for use with industry-standard percussion hammers (10.0 mm holder) • Suitable for use with industry-standard percussion hammers (10.0 mm holder)
• Universal application for work on exhaust systems • Universal use for bodywork and chassis repair
• Specially designed sounds enable the exhaust pipe (inner or outer) to be replaced to be correctly separated • Extension of the working range
from the remaining one, without damaging it. • Utilisation of vibration and shock pulse of Vibro Power pneumatic hammer
• Rotatable • Robust chisel forged out of one piece
• Extension of the working range • Special tool steel
• Robust chisel forged out of one piece Application: Cutting exhausts, loosening of ball joint,
• Special tool steel extracting bolts and cutting metal sheets
Application range
515.3962 Internal pipe € 36,90

515.3963 External pipe € 36,90
Width
515.3964 mm
VIBRO-IMPACT SHEET METAL CUTTING TOOL WITH ANTI-ROTATION DEVICE 515.3967 20,0 € 36,90
• Suitable for use with industry-standard percussion hammers (10.0 mm holder) 515.3968 24,0 € 36,90
• Universal use for bodywork and chassis repair
• Extension of the working range 515.3969 35,0 € 36,90
• Robust chisel forged out of one piece
515.4880
HIGH-PERFORMANCE VIBRO-IMPACT PNEUMATIC CHISEL HAMMER
• With non slip handle
• Ergonomic designed handle
36,90 € • Air exhaust integrated in the handle

• Ideal for industry
• Efficient, gentle loosening of screw fittings
• With stepless impact regulation
Width Length • Vibration dampened
mm mm • Cold insulated handle
20,0 175,0 • Includes 1/4” coupling connector
• Ultra light housing from two component plastic
515.3965
VIBRO-IMPACT FLAT CHISEL WITH ANTI-ROTATION DEVICE
• Suitable for use with industry-standard percussion hammers (10.0 mm holder)
• Universal use for bodywork and chassis repair
• Extension of the working range
Technical data:
Chisel holder: 15 mm
Number of blows: 2500 blows/min
36,90 €
Vibration acceleration: 20,4 m/s²
Noise performance level: 115 dbA
Noise pressure level: 104 dbA
Air consumption: 210 l/min
860,90 €
Width Length
mm mm Operating pressure: max. 6,3 bar (90 psi)
Connection thread: 1/4”NPT
19,0 190,0
515.3966 515.4881
VIBRO-IMPACT HALF-ROUND CHISEL WITH ANTI-ROTATION DEVICE VIBRO-IMPACT TIE ROD REMOVER
• Suitable for use with industry-standard percussion hammers (10.0 mm holder) • Pneumatic chisel adapter (15 mm) for use with pneumatic chisel hammers on the market
• Universal use for bodywork and chassis repair • Extension of the working range
• Extension of the working range • Utilisation of the vibration and impact impulse of the high-performance vibro-impact
• Utilisation of vibration and shock pulse of Vibro Power pneumatic hammer • Robust chisel forged out of one piece
• Robust chisel forged out of one piece • Special tool steel
36,90 € 197,90 €
Width Length Width Length
mm mm mm mm
26,0 195,0 45,0 295,0

31.12.2022
33
515.4882 700.1350
VIBRO-IMPACT FLAT CHISEL, XL UNIVERSAL BEARING AND BUSH DRIVER SET 51
• Pneumatic chisel adapter (15 mm) for use with pneumatic chisel hammers on the market • Universal applicable range pcs
• Extension of the working range • Can be used manually with a hammer or workshop press
• Utilisation of the vibration and impact impulse of the high-performance vibro-impact • Applications from 18.0 - 65.0 mm
• Robust chisel forged out of one piece • Pressure plates are for the two driving spindles
99,90 €
Width Length
mm mm
24,0 290,0
515.4883
VIBRO-IMPACT HAMMER INSERT
• Utilisation of the vibration and impact impulse of the high-performance vibro-impact
369,00 €
150.9710
174, 90
€ UNIVERSAL BEARING AND BUSH DRIVER SET
• for gentle driving of bearing and radial sealing rings
21
pcs
• Universal applicable range
Width Length
mm mm • Can be used manually with a hammer or workshop press
• Applications from 70.0 - 150.0 mm
45,0 295,0 • Pressure plates are for the two driving spindles
515.4884
VIBRO-IMPACT POINTED CHISEL, XL
82,90 €
Length
mm
290,0
735,90 €
515.4885 700.1760
VIBRO-IMPACT CONCAVE INSERT
PRESS AND PULL SLEEVE SET 20
• For the assembly and disassembly of bearings pcs
• Utilisation of the vibration and impact impulse of the high-performance vibro-impact • Ideally for silent bearings, hydro bearings, bushings, ball bearings, simmer rings etc.
• Robust chisel forged out of one piece • Universal use for passenger cars, trucks, communal, agricultural and forest vehicles
• Special tool steel • Outstanding to use also in connection with workshop press or hollow piston cylinder
• According to use application the sheaths individually can be reworked
• Pressure bearing protects against increased friction during the process
186,90 € Attention: the spindles need to be greased with a good lubricant for each application! Do not overload spin-
dles, otherwise the thread lengthens and the pitch of the nut and spindle no longer match. The result: the nuts
will seize up. Always check the applied force at the drive with a torque wrench!
Width Length
mm mm Maximum permitted torque:
45,0 295,0 Spindle M10x1,5 60 Nm
Spindle M12x1,5 100 Nm
515.4886
VIBRO-IMPACT DRIFTERS
99,90 €
Width Length
514,90 €
mm mm
20,0 225,0

31.12.2022
700.1550 700.1700
PRESS AND PULL SLEEVE KIT 37 PRESS AND PULL SLEEVE SET 36
• For the assembly and disassembly of bearings pcs • For the assembly and disassembly of bearings pcs
• Ideally for silent bearings, hydro bearings, bushings, ball bearings, simmer rings etc. • Ideally for silent bearings, hydro bearings, bushings, ball bearings, simmer rings etc.
• Universal use for passenger cars, trucks, communal, agricultural and forest vehicles • Universal use for passenger cars, trucks, communal, agricultural and forest vehicles
• Outstanding to use also in connection with workshop press or hollow piston cylinder • Outstanding to use also in connection with workshop press or hollow piston cylinder
• According to use application the sheaths individually can be reworked • According to use application the sheaths individually can be reworked
• Pressure bearing protects against increased friction during the process • Pressure bearing protects against increased friction during the process
• In durable plastic storage case • In durable plastic storage case
Caution: The spindles must be greased before first use! Overloading leads to unwanted material stresses or Attention: the spindles need to be greased with a good lubricant for each application! Do not overload spin-
breakage Always check the power settings on the drive with a torque wrench Not to be combined with other dles, otherwise the thread lengthens and the pitch of the nut and spindle no longer match. The result: the nuts
systems will seize up. Always check the applied force at the drive with a torque wrench!
Maximum allowable torque moments: Maximum permitted torque:

Spindle (ACME) M10 x P1.5 60 Nm Spindle M10x1,5 60 Nm
299,90 € 843,90 €

31.12.2022
35
700.1800 700.1805
COMPRESSION AND TENSION SLEEVE EXTENSION SET, LEVEL 1 22 COMPRESSION AND TENSION SLEEVE EXTENSION SET, LEVEL 2 14
• For the assembly and disassembly of bearings pcs • For the assembly and disassembly of bearings pcs
• Ideally for silent bearings, hydro bearings, bushings, ball bearings, simmer rings etc. • Ideally for silent bearings, hydro bearings, bushings, ball bearings, simmer rings etc.
• Universal use for construction machines, truck, municipally, country and forestery technology etc. • Universal use for construction machines, truck, municipally, country and forestery technology etc.
• Outstanding to use also in connection with workshop press or hollow piston cylinder • Outstanding to use also in connection with workshop press or hollow piston cylinder
• According to use application the sheaths individually can be reworked • According to use application the sheaths individually can be reworked
• Pressure bearing protects against increased friction during the process • Pressure bearing protects against increased friction during the process
• In durable plastic storage case • In durable plastic storage case
• Supplement set for 700.1700 / 700.1735 • Supplement set for 700.1700 + 700.1800 / 700.1735 + 700.1800
Attention: the spindles need to be greased with a good lubricant for each application! Do not overload spin-
Maximum permitted torque:

Spindle TR20x4 400 Nm
894,90 €
700.1810
MASTER COMPRESSION AND TENSION SLEEVE SET 46
• For the assembly and disassembly of bearings pcs
• Ideally for silent bearings, hydro bearings, bushings, ball bearings, simmer rings etc.
• Universal use for construction machines, truck, municipally, country and forestery technology etc.
• Outstanding to use also in connection with workshop press or hollow piston cylinder
• According to use application the sheaths individually can be reworked

1244,90 €
Spindle TR20x4 400 Nm
700.1735
SPINDLE SET FOR PRESS AND PULL SLEEVE SET 13
• With 4 spindles for KS press and pull sleeve set pcs
• Thread lead: 1.5
• Incl. special thread grease
• Chrome molybdenum

441,90 € 2377,90 €
31.12.2022
980.1090 460.3755
SPECIAL THREAD GREASE FOR PULLER AND PUSHER SPINDLES UNIVERSAL TENSION SLEEVE SET WITH HYDRAULIC CYLINDER 18 T 24
• Lubricant for components subjected to high static loads, e.g. threaded spindles • For the assembly and disassembly of bearings pcs
• Prevents excessive wear and seizing • ideal for silent bearings, hydromounts, bushings, ball bearings, oil seals, etc.
• Irregularities in the surface to be protected are completely filled • universal design for construction machines, trucks, municipal, agricultural and forestry technology, etc.
• Minimises the friction thanks to the closed surface • for use with supplied hydraulic cylinder
• Effective protection against corrosion • Sturdy design
• Increases the service life of threaded spindles • Special tool steel
• Ensures reliable function even at high temperatures up to max. 1200°C
2,90 €
1589,90 €
980.1085
SPECIAL THREAD GREASE FOR PULLER AND PUSHER SPINDLES AND NUTS 460.3925
SUBJECTED HIGH LOADS
• Lubricant for components subjected to high static loads, e.g. threaded spindles
DOUBLE WISHBONE BUSHES SET FOR DAF Ø 70 MM 8
• Prevents excessive wear and seizing • For mounting and dismounting the bushings on the wishbone of the rear axle pcs
• Irregularities in the surface to be protected are completely filled • Suitable for the front bearing and for the rear bearings with Ø 70mm
• Minimises the friction thanks to the closed surface • Secure and easy to use
• Effective protection against corrosion • In conjunction with a workshop press
• Increases the service life of threaded spindles • Special tool steel
• Ensures reliable function even at high temperatures up to max. 1200°C
Application range: DAF wishbone at the rear axle
10,90 €
ASSEMBLY SLEEVES FOR SLOTTED SILENT BEARINGS ON COMMERCIAL
VEHICLES
• Allows the pretensioning of slotted silent bearings on commercial vehicles
• Adaptor for original dimension to intake bore size with conical sleeve
• Universal solution
• For use with hydraulic and / or mechanical press tools
• Press the sleeve directly on the intake of the vehicle is possible
• Contains a selection of the most common diameters
• Polished inside wall for optimum sliding
• Sturdy design
• Low dimension
Application: Leaf spring, stabiliser, cab suspension etc.

Caution: This tool must be combined with parts of other sets (e.g. press and pull sleeve set)
Recommended mounting paste: e.g. MOLYKOTE G-Rapid Plus
684,90 €
460.4160
SOCKET AND WISHBONE SET FOR DAF Ø 75 MM 8
• For mounting and dismounting the bushings on the wishbone of the rear axle pcs
• Suitable for the front and rear bearings with Ø 75mm
• In conjunction with a workshop press
Application range:
DAF wishbone at the rear axle
Dimen- Length Application range
sions mm
e.g. silent bushes for Iveco Eurosta anti-roll
700.1821 58 → 55 85,0 bar /leaf spring € 158,90
e.g. silent bushes for Iveco Eurosta anti-roll
700.1823 63 → 60 85,0 bar /leaf spring € 158,90
700.1825 68 → 63 85,0 e.g. Mercedes anti-roll bar for Actros, Atego € 158,90
700.1827 72 → 68 85,0 e.g. MAN front axle € 158,90
e.g. bearings with pins, Mercedes Actros
700.1829 74 → 70 85,0 € 158,90
645,90 €
Classic
e.g. bearings with pins, Mercedes Actros
700.1831 89 → 84 85,0 anti-roll bar € 174,90

31.12.2022
37
460.1705
SLOT BUSHING TOOL SET FOR SILENT BEARING SLOT BUSHES 19
• Suitable for the installation and removal of the bearing bushes in commercial vehicle spring suspension pcs
• The slotted bushes can be effortlessly preloaded using the clamping block and the accompanying half shells and thus adjusted to the installation dimensions
• Includes 12 t hydraulic cylinder, especially in the construction of fixed bushes
• The hydraulic cylinder is made for universal usage
• Supplied without hydraulic pump
• Optional: Hand pump 640.0010
• Optional: Air Hydraulic Pump 640.0020 max.
• Optional: Electric Hydraulic Pump 640.0030 12t
• Special installation method that protects the bush via parallel working tensioning elements
• The function of the bearing bush is retained
• Simple handling and quick assembly times
• Safe working
• Suitable for bush change directly on the vehicle
Application:
Ø 51 mm - Volvo FM12 Original *CEJN®
Ø 60 mm - DB / Renault (430/450/460)
Ø 68 mm - MAN-TGA (140/414/460) front axle spring ROR, SAF
Ø 68 mm Ø 60 mm
MAN-TGA Ø 51 mm RENAULT
(410/414/460) VOLVO(FM12) (430/450/460)
1819,90 €
640.0010 640.0020
HYDRAULIC HAND PUMP PNEUMATIC HYDRAULIC PUMP
• Single stage • Pneumatic working
• Reverse valve for advance and return stroke • For simply agent press cylinders
• Safety valve for overload protection • Safety valve for overload protection
• Includes pressure tube 1.8 meters • Includes pressure tube 1.8 meters
• Usable tank volume 2081cm³ = 2.081l • Usable tank volume 2081cm³ = 2.081l
• Operating pressure max. 700 bar
• Output per stroke:
0.8 l/min up to 200 bar
0.1 l/min up to 700 bar
1187,90 € 2037,90 €
Connection thread Length Width H Output per stroke Connection thread Length Width H
mm mm mm cm³ mm mm mm
3/8” - 18 NPT 585 133 119 2,62 3/8” - 18 NPT 255 130 200
640.0030
ELECTRIC HYDRAULIC PUMP
• Two stepped for simply agent press cylinders
• Safety valve for overload protection
• Usable tank volume 1900 cm³ = 1.9l
• Includes pressure tube 1.8 meters
• Motor specification 0.37kW - 220/230 V - 50/60 hertz, single phase (3.2 amps)
1. Step: max. 13 bar
2. Step: max. 700 bar
• Output per stroke:
1. Step: 3.31 l/min
2. Step: 0.32 l/ min
Length Width H
5493,90 €
Connection thread mm mm mm
3/8” - 18 NPT 244 244 362

31.12.2022
440.0300 KM LOCKNUT WRENCH, EXTERNAL SPIGOT
UNIVERSAL PRESS TOOL SET 26 • For loosening and tightening groove nuts DIN 981 on crimping or clamping sleeves
• Minimum space on nut size
• For the assembly and disassembly of bearings, bushes and ball joints pcs
• Slim design
• Adapter and pressure crank allow for use with the universal press stand (440.0180)
• Suitable for exact torque possible
• 24 press sleeves in different sizes
• Pin + rubber rings for safe holding
• 61 various internal and external diameters between 30.5 mm and 79.7 mm
• Working range KM4 to KM12 (nuts of ball bearing)
• Universal usage for passenger cars and transporters
• Excellent usage also with work bench press
Application range: Removal and installation of bearings, gear wheels, cone roll bearings, ball bearings etc.
Trucks, land and construction machines, municipally and forestery technology etc.
735,90 €
4-point D1 D2 Number B Height
Receiver For nuts mm mm of studs mm mm
450.5004 1/2 KM4 37,3 28,5 4 4,0 60,0 € 31,90
450.5005 1/2 KM5 44,3 34,5 4 5,0 60,0 € 31,90
440.9997 450.5006 1/2 KM6 52,3 41,5 4 5,0 60,0 € 37,90
UNIVERSAL PRESS TOOL SET FOR AXLE PARTS 38 450.5007 1/2 KM7 59,3 48,5 4 5,0 60,0 € 36,90
• For the assembly and disassembly of bearings, bushes and ball joints pcs
• Adapter and adapter ring allow for use with the universal press stand 450.5008 1/2 KM8 65,5 53,5 4 6,0 60,0 € 36,90
• 22 press sleeves with internal and external diameters between 34.0 mm and 90.0 mm
• Universal usage for passenger cars and transporters 450.5009 3/4 KM9 73,5 60,5 4 6,0 68,0 € 48,90
• Outstanding to use also in connection with workshop press or hydraulic cylinder
• Special tool steel 450.5010 3/4 KM10 78,5 65,5 4 6,0 68,0 € 57,90
Caution: The spindles must be greased before first use! Overloading leads to unwanted material stresses or
450.5011 3/4 KM11 82,5 70,0 4 7,0 68,0 € 50,90
breakage Always check the power settings on the drive with a torque wrench Not to be combined with other
systems
450.5012 3/4 KM12 87,5 74,5 4 7,0 68,0 € 56,90
Maximum allowable torque moments:
Spindle (ACME) M10xP1.5 60 Nm
Spindle (ACME) M12xP2.0 120 Nm 450.5000
Spindle (ACME) M14xP2.0 150 Nm
Spindle (ACME) M16xP2.5 250 Nm SOCKET SET FOR KM GROOVE NUTS, STUDS EXTERIOR 9
• For loosening and tightening groove nuts DIN 981 on crimping or clamping sleeves pcs
• Slim design
1249,90 € 327,90 €
31.12.2022
39
KM LOCKNUT WRENCH, INTERNAL SPIGOT 460.1025

• For loosening and tightening groove nuts DIN 981 on crimping or clamping sleeves SLOTTED NUT WRENCH WITH 4 PINS FOR DAF
• Internal studs for high torque
Application range: DAF XLR (Euro 4) centre drive shaft bearing
82,90 €
D1 D2 D3 Number of B H
72,0 57,0 50,0 4 6,0 55,0
4-point D1 D2 Number B Height
Receiver For nuts mm mm of studs mm mm
450.5024 1/2” KM4 42,0 28,3 4 4,0 60,0 € 31,90 455.0100
SPECIAL SOCKET FOR 8 POINT SCREWS
450.5025 1/2” KM5 50,0 34,3 4 5,0 60,0 € 34,90
• Special 8 point internal profile
450.5026 1/2” KM6 59,0 41,3 4 5,0 60,0 € 36,90 • To the dismantling and assembly of the control switch for the differential lock
• Ideally suited also for various electric switches on the transmissions
450.5027 1/2” KM7 66,0 48,3 4 5,0 60,0 € 42,90 • Mirror polished
450.5028 1/2” KM8 73,0 53,5 4 6,0 60,0 € 48,90
Application range: MAN, Mercedes LKW Actros, SK Baureihe etc.
450.5029 3/4” KM9 80,0 60,5 4 6,0 68,0 € 51,90
450.5030 3/4” KM10 86,0 65,5 4 6,0 68,0 € 61,90
450.5031 3/4” KM11 93,0 69,5 4 7,0 68,0 € 61,90
450.5032 3/4” KM12 98,0 74,5 4 7,0 68,0 € 61,90
450.5020
SOCKET SET FOR KM GROOVE NUTS, STUDS INTERNAL 9
• For loosening and tightening groove nuts DIN 981 on crimping or clamping sleeves pcs
36,90 €
• Internal studs for high torque
• Use in conjunction with extensions, ratchets etc.
• Suitable for exact torque
• Pin + rubber rings for safe holding Spanner width Ø Length
• Working range KM4 to KM12 (nuts of ball bearing) profile mm mm mm
Application: Removal and installation of bearings, gear wheels, cone roll bearings, ball bearings etc. 8 point 27 34,0 57,0
460.3815
WRENCH WITH 6 PINS FOR MERCEDES
3/4“: KM9 - KM10 - KM11 - KM12 • Removal and installation of differential nuts
• External drive hexagonal socket 32.0 mm
Application range: Mercedes Citaro and Evo-Bus (ZF axle)
1/2“: KM4 - KM5 - KM6 - KM7 - KM8
73,90 €
407,90 € D1
mm
84,0
D2
mm
58,0
D3
mm
72,0
Number of
studs
6
B
mm
10,7
Length
mm
60,5
Depth
mm
9,0

31.12.2022
460.4155 460.0620
DIFFERENTIAL MAIN SHAFT BEARINGS PULLER SET FOR DAF 8 DIFFERENTIAL TAPERED ROLLER BEARING PULLER FOR MAN 12
• For damage-free mounting and dismounting of the differential’s main shaft bearings pcs • Designed for the damage-free removal of the cone roll bearings at the differential pcs
• Extremely sturdy execution • Extremely sturdy execution
• Including 2 half-shell pairs • Includes 2 half shell pairs Ø 115 and Ø 137 mm
• Trapezoid thread spindle for high removal power - drive 30 mm • Trapezoid thread spindle for high removal power - drive 30 mm
Application range: DAF (CF) 35 t Application range: MAN differential roll bearing
 30 mm
1079,90 €
460.3685
DIFFERENTIAL MAIN SHAFT BEARINGS PULLER SET FOR DAF 10 Ø 115 / 137 mm
• For damage-free mounting and dismounting of the differential’s main shaft bearings pcs
• Extremely sturdy execution
• Including 2 half-shell pairs
979,90 €
Application range: DAF (CF) 35 t
460.3905
DIFFERENTIAL MAIN SHAFT BEARINGS PULLER SET FOR SCANIA 7
• For damage-free removal of the main shaft bearings of the differential pcs
Application range: Scania (113/114) and MAN (410/414)
843,90 €
460.3690
DIFFERENTIAL MAIN SHAFT BEARINGS PULLER SET FOR DAF 14
AND SCANIA pcs
• For damage-free removal of the main shaft bearings of the differential
Application range: DAF (CF) 35 t
1589,90 € 917,90 €
31.12.2022
41
460.3910 460.1050
DIFFERENTIAL MAIN SHAFT BEARINGS PULLER SET FOR VOLVO 8 LIFTING CYLINDER TOOL SET 2
• For damage-free removal of the main shaft bearings of the differential pcs • for mounting and dismounting the oil seal on the hydraulic lifting cylinder pcs
• Extremely sturdy execution • Internal square drive to DIN 3121 / ISO 1174
• Including 2 half-shell pairs • Extremely sturdy execution
• Trapezoid thread spindle for high removal power - drive 30 mm • For machinery usage
Application range: Volvo (FM12) Application range: Volvo FM12 >2005 Lifting cylinder tandem axle lifter
129,90 €
460.5475
SHAFT SEAL ASSEMBLY MANDREL FOR MERCEDES
• ideally suited for damage-free installation of the shaft sealing rings
• To be used with a rubber hammer
• Seal seats are spared
798,90 €
460.4360
DIFFERENTIAL MAIN SHAFT BEARINGS PULLER SET FOR VOLVO 12
• For damage-free removal of the main shaft bearings of the differential pcs
Application range: Volvo FM12 (EV90/EV91)

248,90 €
Ø1 Ø2 Ø3 Ø4 Height
mm mm mm mm mm
208,0 171,5 163,5 142,0 182,0
460.5476
SHAFT SEAL ASSEMBLY MANDREL FOR MERCEDES
• ideally suited for damage-free assembly of the cassette shaft seals
• To be used with a rubber hammer
• Seal seats are spared
Application range: Mercedes Actros VA 739.5 - HA 749.108/30
135,90 €
Ø1 Ø2 Ø3 Ø4 Height
1299,
mm mm mm mm mm
90
€ 165,0 152,5 142,0 132,0 158,0

31.12.2022
460.5477 460.1105
SHAFT SEAL ASSEMBLY MANDREL FOR MERCEDES HUB CAP SOCKET FOR SAF
• ideally suited for damage-free installation of the shaft sealing rings • Internal square drive to DIN 3121 / ISO 1174
• To be used with a rubber hammer • for mounting and dismounting of grease caps on SAF axles
• Seal seats are spared • 8-point
• Special tool steel • Extremly versatile
• Suitable for exact torque on a hexagon head possible
Application range: Mercedes Actros AP rear axles • Suitable for high tightening and loosening torque
158,90 € 214,90 €
Ø1 Ø2 Height Spanner width Ø Height
mm mm mm mm mm mm
176,0 142,0 164,0 130,0 155,0 77,0
460.5478 460.4790
POLE WHEEL MOUNTING MANDREL FOR MERCEDES AXLE NUT WRENCH FOR SAF
• ideally suited for damage-free installation of the pole wheels • With hexagon drive 32.0 mm
• To be used with a rubber hammer • 6 point
• Seal seats are spared • Very high degree of accuracy
• Special tool steel • Extremely robust version
Application range: Mercedes Actros VA with brake discs and ABS, lift axles as well as identical axles of • Special tool steel
supports
Application range: SAF trailer axle
174,90 € 104,90 €
Ø1 Ø2 Height Spanner width 6-point Ø Height
186,0 159,0 162,0 85,0 32 140 102,0
907.2237 450.0201
CARBIDE SCRAPER AXLE NUT WRENCH FOR SAF
• ideal for removing stubborn impurities, sealant residues • Six sided drive 36 mm
and surface treatment • Positive drive of the axle nut
• for burnt on pads on the exhaust, brakes etc. • Any extensive slipping is avoided
• with a very hard-wearing carbide cutting element • Milled out profile
• a solid blade with two scraping edges • Sturdy design
• Extremely long service life • Can be used with an impact wrench or torque wrench
• works as a compression and a pulling blade • Special tool steel
• With an ergonomic, moulded, one component handle
• With reinforcement eyelet Application range: SAF axle trailers
32 mm
197,90 €
210 mm Spanner width 6-point Ø Height
56,
mm mm mm mm
90
€ 85,0 36 118,0 82,0

31.12.2022
43
450.0110 460.4785
AXLE NUT WRENCH FOR SAF MOUNTING ARBOR FOR SAF WHEEL BEARINGS
• Positive drive of the axle nut • for the professional assembly of wheel bearings
• Sturdy design • Sturdy design
• Ideally suited for brake restoration working
• Forward tension with SW 32 mm is at 150 Nm Application range: SAF wheel hubs
• Angle of rotation 20-30° with SW 46
Application range:
SAF Euro axle etc.
158,90 € 299,90 €
Spanner width 6-point Height Ø1 Ø2 Ø3 Ø4
140,0 32 100,0 185,0 174,0 165,0 158,0
460.4705 460.4815
WHEEL HUB PULLER SET FOR SAF 2 THRUST PIECE FOR WHEEL HUB FOR SAF
• For 140 mm hole diameters pcs • Thrust piece for removing wheel hubs
• Sturdy design • can be used with pullers 440.0590, 440.0610 and 450.1765
• Threaded spindle for high pull-off force - 32 mm drive • Sturdy design
Application range: SAF wheel hubs
56,90 €
External Ø Internal Ø
129,
mm mm
90
€ 88,0 82,0
460.4845 460.4875
WHEEL BEARING MOUNTING SLEEVE FOR SAF HD BUSHING TOOL SET FOR SAF 9
• ideally suited for mounting and dismounting the compact wheel bearing with wheel hub on SAF axles • ideally suited for disassembly and assembly of the HD bushings on SAF axles pcs
• with right and left-hand thread • Sturdy design
• Sturdy design • Threaded spindle for high pull-off force - 30.0 mm drive
104,90 €
Thread Ø Length
mm mm
M70 x 82,0 150,0
1.5
460.4795
WHEEL BEARING MOUNTING SLEEVE FOR SAF
• ideally suited for mounting and dismounting the compact wheel bearing with wheel hub on SAF axles
• with right and left-hand thread
• Sturdy design
146,90 €
Thread Ø Length
1579,90 €
mm mm
M75 x 88,0 150,0
1.5

31.12.2022
460.4885 460.4695
3D BUSHING TOOL SET FOR SAF AXLES, MERCEDES DCA 12 DRIVE-IN MANDREL FOR CASSETTE SEALING RING ON SAF AXLES 2
AND HT AXLES pcs • ideally suited for mounting cassette sealing rings on SAF axles pcs
• ideally suited for disassembly and assembly of 3D bushings on SAF and Mercedes axles • Sturdy design
• Special tool steel Application range: SAF axles
Application range: SAF and Mercedes axles
333,90 €
460.4720
BRAKE CALIPER REPAIR KIT 36
• for the professional repair of callipers pcs
• for the replacement of bellows, calliper bearings and the internal sealing of the bellow
• Enormous time and cost saving
Application range: Knorr (SB, SN and SK),

Wabco (PAN 19-1 and PAN 22-1),
1359,90 €
Haldex Modul T (SAF, SBS2220 H0)
460.4900
ARCING WHEEL MOUNTING TOOL FOR SAF
• ideally suited for mounting pole wheels
on SAF axles
• Sturdy design
985,90 €
Application range: SAF axles S-, Z-Series
460.4850
DOUBLE LEVER FOR SNAP RING RIMS
• ideally suited for dismantling snap ring rims
• Special shape
339,90 €
460.4670
ASSEMBLY MANDREL FOR BEARING RING AND EXCITER RING FOR SAF 360 mm
• ideally suited for mounting bearing rings and pole wheels on SAF axles
61,90 €
• Sturdy design
Application range: SAF axles SK RB 9022 KI(01), SK RB 9019KI, SK RB 9019 WI, SK RB 9022WI, B(I)9-19K,
B(I)9-19W, B(I)9-19K01, B(I)9-22W (6), BA9-22K01
460.4855
OPENING LEVER FOR THREE-PIECE RIMS
• ideally suited for the assembly and disassembly of three-piece rims
• Special shape
288,90 € 402 mm
Ø1 Ø2 Ø3 Height
73,90 €
mm mm mm mm
159,0 138,0 80,0 104,0

31.12.2022
45
460.4835 460.4925
BRAKE SHOE CLAMPING DEVICE FOR SAF 6 LOCK TESTER 2” FOR CHECKING THE WEAR LIMIT OF THE FIFTH WHEEL
• suitable for mounting and dismounting brake shoes pcs COUPLING
• Sturdy design • Relevant for the backup check
• Special tool steel • Sturdy design
Application range: SAF SK500, SK500 Plus, SK9042/11242 and SK9037/11037
Application range: fifth-wheel coupling
582,90 €
440.0385
BUSHING SET FOR SAF 6
• for mounting and dismounting the 3D bearing (150mm) on SAF axles pcs
• extremely robust 500mm tie rods with inductively hardened thread
• Enables use directly on the vehicle
• ideal for use with 32t hydraulic cylinder (440.0025)
• Simple handling
214,90 € Recommended hydraulic cylinder: 32t (440.0025)

Application range: SAF axle
460.4700
CLAMPING FIXTURE SET FOR DRUM LATHE Ø 50 MM 2
• suitable for use with brake drum lathe pcs
• Sturdy design
Application range: SAF (SK500, SK500 Plus, SK9042/11242 and SK9037/11037)
611,90 €
Ø 205 mm Ø 142 mm
WHEEL CAP IMPACT WRENCH FOR BPW
• For the assembly and dismantling of grease caps on BPW axles
• 8-point
• With impact area
492,90 € • For heavy duty applications

• For manual use
460.4710
3.1/2” LIMIT GAUGE FOR CHECKING THE WEAR LIMIT OF THE KINGPIN
• to check the wear limit of the kingpin
• relevant for the safety check Spanner width mm Length
• Sturdy design mm
460.4685 95 233,0 € 99,90
Application range: kingpin
460.4690 110 240,0 € 104,90
WHEEL CAP IMPACT WRENCH FOR BPW

• For the assembly and dismantling of grease caps on BPW axles
• Flat oval form
• With impact area
• For heavy duty applications
• For manual use

mm
460.4675 95 233,0 € 99,90
84, 90
€ 460.4680 110 240,0 € 104,90

31.12.2022
AXLE NUT WRENCH FOR BPW 450.0215

• Internal square AXLE NUT WRENCH FOR BPW
• 6 point
• 6 point
Application range:
BPW axle nuts (crown nuts)
16 tonne axles

mm
460.4933 46 155,0 € 48,90
460.4936
460.4938
70
85
80,0
300,0
€
€
67,90
73,90
158,90 €
460.4939 95 85,0 € 82,90 mm mm mm mm
460.4940 100 80,0 € 93,90 85,0 110,0 84,0 33,0
AXLE NUT WRENCH FOR BPW 460.4943

• Internal square drive to DIN 3121 / ISO 1174 AXLE NUT WRENCH FOR BPW
• Flat oval form
• 6 point
Application range: BPW axles
Spanner width mm Ø
mm
Height
mm
104,90 €
450.0204 65,0 82,0 66,0 € 93,90 mm mm mm
450.0205 80,0 100,0 80,0 € 136,90 46 64 64,0
460.4150 AXLE NUT WRENCH FOR BPW

AXLE NUT WRENCH FOR BPW • Internal square drive to DIN 3121 / ISO 1174
• Flat oval form
• Flat oval form
135,90 € Spanner width mm Ø

mm
Height
mm
Spanner Ø Height
width mm mm mm 460.4944 65 82 78,0 € 135,90
85 117 70,0 460.4945 80 100 78,0 € 191,90

31.12.2022
47
460.4946 450.0207
HUB CAP SOCKET FOR BPW HUB CAP SOCKET FOR BPW
• for mounting and dismounting BPW hubcaps • For the assembly and dismantling of grease caps on BPW axles
• Internal square drive to DIN 3121 / ISO 1174 • Extremly versatile
• 8-point • Flat oval form
• High accuracy of fit • Suitable for exact torque on a hexagon head possible
• Extremely robust version • Suitable for high tightening and loosening torque
• For machinery usage • Special tool steel
186,90 € 124,90 €
Spanner width Ø Height Spanner width 6-point Ø Height
95 115 91,0 95,0 41 110,0 90,0
460.1325 450.0208
HUB CAP SOCKET FOR BPW HUB CAP SOCKET FOR BPW
• Internal square drive to DIN 3121 / ISO 1174 • For the assembly and dismantling of grease caps on BPW axles
• For the assembly and dismantling of grease caps on BPW axles • Extremly versatile
• Extremly versatile • Suitable for exact torque on a hexagon head possible
• Suitable for exact torque on a hexagon head possible • Suitable for high tightening and loosening torque
158,90 € 174,90 €
Spanner width Ø Height Spanner width 6-point Ø Height
110,0 132,0 80,0 111,0 41 132,0 90,0
460.0415 460.0420
HUB CAP SOCKET FOR BPW AXLE NUT WRENCH FOR BPW
• For the assembly and dismantling of grease caps on BPW axles • Internal square drive to DIN 3121 / ISO 1174
• Extremly versatile • High accuracy of fit
• Suitable for exact torque on a hexagon head possible • Extremely robust version
Application range: BPW axles 12 t
146,90 € 175,90 €
Spanner width 6-point Ø Height Spanner width Ø Height
111,0 41 130,0 95,0 111,0 132,0 80,0

31.12.2022
460.0410 TAPERED ROLLER BEARING PRESS-IN TOOL FOR BPW
AXLE NUT WRENCH FOR BPW • Bearing installation aid
• For damage free mounting
• With six sided drive 41 mm
• 8-point
Application range: Tapered roller bearing outer rings
Application range: BPW axles 16 t
Ø
mm
460.4952 100,0 € 82,90
460.4956 113,0 € 93,90
460.4955 123,0 € 99,90
460.4957 123,0 € 99,90
174,90 €
460.4954 142,0 € 124,90
460.4951 157,0 € 124,90
Spanner width Ø Height 460.4953 160,0 € 129,90
mm mm mm
120,0 142,0 95,0
RACEWAY PRESS-IN TOOL FOR BPW
• Raceway installation aid
• For damage free mounting
460.1830 • Extremly versatile
WHEEL CAP SOCKET WRENCH FOR BPW
• for mounting and dismounting BPW hubcaps Application range: Hub sealing rings
• Flat oval form
• Special tool steel Ø Height suitable for
mm mm
Application range: BPW axles ECO / ECO Plus 2 460.4958 139,0 48,0 02.5683.62.00 € 231,90
460.4960 159,0 38,0 02.5683.80.00 € 197,90
460.4959 159,0 48,0 02.5683.63.00 € 271,90
460.4870
TAPER ROLLER BEARING EXTRACTOR FOR BPW
• ideally suited for the removal of fixed tapered roller bearings with thrust ring
• Sturdy design
186,90 € • Threaded spindle for high pull-off force

Application range: BPW axles 10-14 t

mm mm mm
120 143,0 78,0
UNIVERSAL WHEEL HUB PULLER

• Extracting the wheel hubs and/or housing over the grease cap thread
• Six sided drive enable unscrewing on the cap
• Sturdy design
299,90 €
460.4755
POLE WHEEL MOUNTING TOOL FOR BPW
• ideally suited for mounting pole wheels on BPW axles
• Sturdy design
Application range: BPW EcoPlus 8 - 9 t axles
Size outside thread Application for
460.4810 M84 x 2 mm 610.1901 € 93,90

460.4800 M115 x 3 mm 450.0077 € 118,90 84,90 €
31.12.2022
49
460.4961 460.4830
INSTALLATION TOOL FOR EXCITER RING ON BPW AXLES DRIVING PIN FOR BEARING BUSHES ON BRAKE PINS / SHAFTS 3
• ideally suited for mounting pole wheels on BPW axles • ideally suited for mounting of bearing bushes on brake pins / shafts pcs
• Sturdy design • two driving mandrels included in delivery
• Special tool steel • for use with the hammer
• Sturdy design
Application range: BPW EcoPlus 3 axles • Special tool steel
158,90 € 141,90 €
460.1010 460.4860
BPW SEAL ASSEMBLY PIN ASSEMBLY TOOL SET FOR BRASS BUSHING LOCATING BEARING 5
• Ideal for the protective assembly of seals • ideally suited for disassembly and assembly of brass bushes Fixed bearing on disc brakes pcs
• Suitable for manual operation • Sturdy design
• To be used with a rubber hammer • Special tool steel
Application range: BPW disc brakes
Application range: BPW 12 t trailer
104, 90
€
146,90 €
Ø Length 460.4905
mm
159,0
mm
166,0
PULL-OUT AND PULL-IN TOOL FOR FLOATING BEARINGS 7
AND GUIDE SLEEVES BPW pcs
• for professional brake repair
460.4980 • for pulling out and in of the guide sleeves of the floating bearings
LEVER FOR BRAKE RETURN SPRING MOUNTING FOR BPW • Very high degree of accuracy
• Enormous time and cost saving
• ideally suited for the disassembly and assembly of brake springs on drum brakes • Special tool steel
• Used for cylindrical and conical retaining clips
• Special tool steel Application range: BPW SH and SKH
Application range: BPW (SN300, SN360 and SN420)
300 mm 248,90 €
31,90 € 460.4760
STEEL-RUBBER BUSHES DISMANTLING ASSEMBLY TOOL FOR BPW 6
460.4770 • Assembly and disassembly of bushings pcs
• ideally suited for steel-rubber bushings on shackle stabilisers
PULLING DEVICE FOR BRAKE PINS ON THE DRUM BRAKE • Enables de -and assembly directly on the vehicle
• ideally suited for the dismantling of brake pins on the drum brakes • Easy to use
• incl. threaded insert M 20 x 1.5 mm / M 20 x 1.5 mm • Saves a lot of time
320 mm
299,90 € 203,90 €
31.12.2022
STEEL-RUBBER BUSHES ASSEMBLY TOOL FOR BPW 460.4995

• universally applicable for the removal and installation of steel-rubber bushings MEASURING TUBE FOR BPW
• excellent for use in combination with a workshop press
• ideally suited for aligning axes and assemblies in conjunction with the screw-in heads 460.4992, 460.4993
• Easy to use
and 460.4994
• Saves a lot of time
• Sturdy design
• for light and heavy trucks
Application range: BPW ECO Plus 2
M30 x 1,5 mm
620 mm
271,90 €
460.4996
Ø MEASURING TUBE EXTENSION FOR BPW
mm
• ideally suited for aligning axes and assemblies in conjunction with the screw-in heads 460.4992, 460.4993
460.4990 24,0 € 186,90
and 460.4994
• Sturdy design
460.4991 30,0 € 186,90 • Special tool steel
SCREW-IN HEAD FOR BPW M30 x 1,5 mm

• ideally suited for aligning axes and assemblies in conjunction with measuring tubes 460.4995 and 460.4996
• also suitable as extraction device for hubs in connection with the forcing-off screw 460.4997
• Sturdy design
Application range: BPW axles 620 mm
271,90 €
460.4997
JACKING BOLT FOR BPW
• ideally suited as extraction device for hubs in connection with the screw-in heads 460.4992, 460.4993 and
460.4994
• Sturdy design
M30 x 1,5 mm
Receiver
mm
460.4992 M125 x 2 € 333,90
460.4993 M135 x 2 € 378,90
460.4994 M136 x 2,5 € 367,90 124,90 €
150.1810
ALIGNMENT TOOL SET FOR LIGHT AND HEAVY COMMERCIAL VEHICLE 21
• Universal application, independently of hole spacing and number of bolts pcs
• For repair work on steering and suspension components
• Restoring of the original wheel adjustment parameters such as toe-in and track width after a repair
• when replacing suspension parts, e.g.: Track rod end (ball joint)
• Independent of mains power supply and measuring location
Application range: Use of transporters, trucks, buses, trailers and semi-trailers
259,90 €
31.12.2022
51
...AND YOU WANT
MORE?
WWW.KSTOOLS.COM
SPECIAL TOOLS FOR

COMMERCIAL VEHICLES
AND TRANSPORTER
23 CHAPTER
4.672 ARTICLES
528 PAGES
KS Tools Werkzeuge - Maschinen GmbH

Your Local Distributor
Seligenstädter Grund 10 - 12
D-63150 Heusenstamm
LL22-12EN_EUR
GERMANY
Tel.: +49(0) 61 04 49 74-0
Fax: +49(0) 61 04 49 74-11
e-mail: kstools@kstools.de
www.kstools.com

All prices are ex. VAT. With the release of this leaflet all previous prices became invalid. Sold only in specialist stores. Print mistakes, errors and technical alterations excepted.
Prices valid up to 31.12.2022

Ll22 12en Eur Ks Tools LKW Achse

Uploaded by

Document Information

Original Description:

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Ll22 12en Eur Ks Tools LKW Achse

Uploaded by

Copyright:

Available Formats

AXLES -

Application range: 6 point-, 8 point-, nuts-

390,90 € Spanner width

Spanner width Jaw opening A B L T

*This is an limited special price offer - only until stocks last.

AXLE NUT WRENCH, LONG

Spanner width mm Length

Spanner width D Height T

*This is an limited special price offer - only until stocks last.

AXLE NUT SOCKET, SHORT

AXLE NUT SOCKET WITH GUIDE BAND

AXLE NUT WRENCH, LONG

*This is an limited special price offer - only until stocks last.

AXLE NUT SOCKET, SHORT

AXLE NUT SOCKET, SHORT

*This is an limited special price offer - only until stocks last.

*This is an limited special price offer - only until stocks last.

Ø Number of Internal stud Ø Length

Spanner width Ø Height

Application range: Iveco Euro Cargo HA

*This is an limited special price offer - only until stocks last.

*This is an limited special price offer - only until stocks last.

*This is an limited special price offer - only until stocks last.

Application range: Mercedes + MAN drive axle

External Ø Internal Ø D3 Number of B T Height

177, 90 M56 x 1,5 mm

*This is an limited special price offer - only until stocks last.

197,90 € Thread 6-point

*This is an limited special price offer - only until stocks last.

Application range: Mercedes hypoid axles HO 5/5

203,90 € M48 x 1,5 mm

*This is an limited special price offer - only until stocks last.

€ 122,0 139,0 32 123,5 6 10,4 310,0

*This is an limited special price offer - only until stocks last.

Application range: SAF axle trailers

Spanner width 6-point Ø Height

Application range: SAF Euro axle etc.

*This is an limited special price offer - only until stocks last.

AXLE NUT WRENCH FOR SCANIA 80 41 105,0 98,0 25,0

*This is an limited special price offer - only until stocks last.

Spanner width External Ø Locating tube Height Depth

Spanner width mm Height

*This is an limited special price offer - only until stocks last.

CLAMP NUT SOCKET

Spanner width mm Height

Application range: new MAN front axle wheel hub

Application range: Sauer, BPW, Scania, Fuso, Hino

Size internal Size outside Spindle size Spanner width

*This is an limited special price offer - only until stocks last.

Application range: IF axles

Technical data: Technical data:

Caution: The maximum pressure values for the hydraulic cylinder

• Industrial execution with forged piston

• Universal usage with reduction M10-M22

2.1/4“-14 UNS 1.1/2“-11

Article can only be used in

110, 90 conjunction with 440.0593.

WHEEL BEARING INSTALLATION AID FOR DAF 460.4135

WHEEL BEARING INSTALLATION AID FOR VOLVO 339,90 €

Recommended hydraulic cylinder: 32t (440.0025) and 45t (440.0480)

Application range: Wheel bearing front axle Scania

WHEEL BEARING INSTALLATION AID FOR VOLVO