Address: No.

168, Xiadu Road, Haizhu District, Guangzhou, China 510300

Email: info@CNCmakers.com Website: www.CNCmakers.com Tel: +86-138-24444158 Fax: +86-20-84185336

GSK928TEII TURNING MACHINE CNC SYSTEM

GSK928TEII Turning Machine CNC System has stable performances and many functions, matched with
our AC servo drive unit to compose the high performance CNC system. The system can match other drive
units according to the user’s requirements.

Brief
z CPLD hardware interpolation, μm precision, and max. rapid traverse speed 15m/min；
z Acceleration/deceleration characteristics, auxiliary function logic are set by the user;
z Inch/metric single/multi thread machining, rigid tapping function;
z 480×234TFT color display, tool path imitation;
z Chinese/English operation panel, standard ISO code edit in full screen;
z Match with AC servo drive unit and servo motor to get the high cost-performance, match with the
medium CNC turning machine;

Specification
Controlled axes：X，Z Least command increment：0.001mm
Interpolation: X, Z linear, arc interpolation
Maximum programmable
Max. rapid traverse speed: 15000mm/min
dimensions：±8000.000mm
Max. cutting feedrate：linear 6000mm/min, circular 3000mm/min
Motion control
Feedrate override: 16 steps 0～150%
Rapid override: 25%, 50%, 75%, 100%（valid in Manual/Auto mode）
Acceleration/deceleration: automatic acceleration/deceleration, its time can
be adjusted
MPG:×1mm,×10mm,×100mm
Display: 480×234TFT color display
Display window
Display mode: Chinese/ English Graph display: tool path imitation
Ｇ 26 G commands including fixed/compound cycle machining, Z drilling tapping
command and so on.
Metric/inch single and multiple straight, taper thread, high-speed retraction
with setting the retraction distance
Thread function
Pitch: 0.250~100.00mm(metric) 100.000~0.250 tooth/inch(inch)
Rigid tapping function
 Address: No.168, Xiadu Road, Haizhu District, Guangzhou, China 510300
Email: info@CNCmakers.com Website: www.CNCmakers.com Tel: +86-138-24444158 Fax: +86-20-84185336
Spindle encoder：1024p/r or 1200p/r incremental encoder（transmission
ratio is 1:1）
backlash：（X, Z）0～10.00mm
Compensation
Tool compensation: 32 groups tool length compensation
Tool setting mode: fixed Optional tool post: 4～8 tool selection tool
point and trial cutting post
Tool selection signal input mode: No. 1~ No. 4 tool selection signal direct
Tool function input, No. 5~8 tool selection encode input
Tool change: T command absolute or manual relative tool change, CCW
tool selection, in-position clamp
Tool compensation mode: traverse tool/modify coordinates
Control mode: gear or analog control
Gear control: S1, S2, S3, S4 direct output or BCD encode output S0~S15，
Spindle function manually gear shifting
Analog control: three gears, output 0~10V spindle speed
Constant surface cutting function: have(valid in spindle analog control model）
Spindle CCW, CW, stop, brake; cooling ON/OFF; lubricating ON/OFF; chuck
Auxiliary
release/clamp; tailstock forward/backward; chuck clamp: outer/inner(set by a
function
parameter) ; 2 user input signals, 2 user output signals
Program capacity：62 KB, Format：ISO command, incremental/
Program edit 100 programs compound programming
Subprogram: editable Program, parameter power-down hold
RS232 communication interface is standard configuration; optional to the
communication function which provides the communication software and
Communication
communication cable, two-way transmitting programs between PC and CNC
or CNC and CNC.
Switch power: GSK PC（installed and connected）
Optional drive Drive unit：DA98 AC servo Drive unit
unit Tool post controller：GSK TC（optional to 4~8 tool selection tool post for user
to change）
Aluminum alloy panel Weight Net weight：5Kg
Panel dimension
420mm×260 mm Gross weight：7.35Kg

G command List
Command Function Command Function
G00 Rapid traverse (positioning) G22 Partial cycle start
G01 Linear interpolation G80 End of partial cycle
Workpiece absolute coordinate system
G02 CW arc interpolation G50
setting
G03 CCW arc interpolation G31 jump

G33 Thread cutting G26 X, Z reference point return

G32 Tapping cycle G27 X reference point return
G90 Outer, inner cylinder surface cycle G29 Z reference point return
G92 Thread cutting cycle G04 Dwell
G94 Outer, inner taper cycle G96 Constant surface speed control
G74 End face drilling cycle G97 Constant surface speed control cancel
G75 Outer, inner grooving cycle G93 System offset
G71 Outer roughing cycle G98 Feed per minute
G72 End face roughing cycle G99 Feed per rev
 Address: No.168, Xiadu Road, Haizhu District, Guangzhou, China 510300
Email: info@CNCmakers.com Website: www.CNCmakers.com Tel: +86-138-24444158 Fax: +86-20-84185336

Ordering Type and Configuration

Ordering Type

Type Explanation

GSK928TE II Aluminum panel (420mm×260mm)

Configuration
Type GSK928TEII
Standard
Configuration Relational function in “Technical specification”
Function
Optional Communication:
Configuration The bidirectional transformation of program and parameter data between system and
Function PC are realized.
One piece for GSK-PC2 switch power (installed on CNC)
DB socket: two pieces of DB9 female, one piece of DB9 male, one piece of DB15
female, one piece of DB25 female and one piece of DB25 female
DB head rubber box: three sets of 9B rubber box, two sets of 15P rubber box and two
Function
set of 25P rubber box
Standard
Cables:
Configuration
8 cores shield wire18m (input interface 3m×2, output interface 3m×2, tool-post
Attachment
interface 3m and encoder interface 3m)
10 cores shield wire (X and Z axis interface 3m×2)
Anti-interference elements: six of 104/630V capability, eight of IN4007 diode
A copy of 928TE II User Manual
Communication elements: five meters of communication cable, one piece of
communication soft disk (with communication function)
Additional panel: AP01 (Aluminum alloy 420×71mm), consolidated under the CNC
Electronical MPG:
①Mini MPG: Changchun Yiguang ZGB-3-001-100 or Wuxi Ruipu
Optional RGT600-B01-100B/051-2
Configuration ② Big MPG: Changchun Yiguang LGF-001-100 or Wuxi Ruipu
Attachment
RGT800-B01-100B/051-2.
Switch:
① ESP switch LAY3-02ZS/1
② Auto-lock switch KH-516-B21 (Red or green)
Non auto-lock switch KH-516-B11 (Red or green)

Explanation:
1. When the cables with such as drive unit, tool-post controller etc products are offered in whole set in
terms of the non welding form, the welded cables are then provided.
2. When the products are provided in whole set with drive unit, tool-post controller, the DB socket of
corresponding interface offers with the welded signal.