Data Sheet

Data sheet
| Item number: 787-1644
Switched-mode power supply; Classic; 3-phase; 24 VDC output voltage; 40
A output current; TopBoost; DC OK contact
www.wago.com/787-1644
Item description
Features:
Switched-mode power supply with TopBoost, enabling secondary-side protection via circuit breakers
Natural convection cooling when horizontally mounted
Enclosed for use in control cabinets
Contact (DC O K)
Suitable for both parallel and series operation
02.05.2019 Page 1/11
Downloaded from Arrow.com.
Data sheet | Item number: 787-1644
Suitable for both parallel and series operation

Electrically isolated output voltage (SELV) per EN 60950-1/UL 60950-1; PELV per EN 60204
Data
Technical Data
Input
Phases 2
3
Nominal input voltage Ui nom (2 / 3) x AC 400 … 500 V
Input voltage range (2 / 3) x AC 320 … 575 V; DC 450 … 800 V

Nominal mains frequency range 47 … 63 Hz; 0 Hz
Input current Ii ≤ 3 x 2.15 A (400 VAC); ≤ 3 x 1.82 A (500 VAC)
Discharge current ≤ 1 mA

Inrush current ≤ 30 A (NTC)
Power factor correction (PFC) Passive
Mains failure hold-up time ≥ 25 ms (500 VAC); ≥ 15 ms (400 VAC)
Output
Nominal output voltage Uo nom DC 24 V (SELV)
Output voltage range DC 23 … 28.5 V (adjustable)

Factory preset DC 24 V
Nominal output current Io nom 40 A (24 VDC)
Nominal output power 960 W

Adjustment accuracy ≤ 1 %
Residual ripple ≤ 30 mV (peak-to-peak)
Current limitation 1.1 x Io nom typ.
Overload behavior Constant current
Signaling and communication
Signaling 1 x LED DC OK (green)

1 x DC OK contact (make contact; max. 30 V AC/DC, 1 A)
Operation status indicator LED green (Uo)
Efficiency/Power losses:
Power loss Pv ≤ 4.2 W (no load); ≤ 83.9 W (400 VAC; nominal load)
Max. power loss Pv max. 83.9 W (500 VAC / 24 VDC; 40 A)
Efficiency 92 %
02.05.2019 Page 2/11
Efficiency 92 %
Fuse protection:
Internal fuse No
External fuse (required) 3 x circuit breakers 6 A, 10 A, 16 A, characteristic: B or C, max. 20 A
or motor circuit breakers
an external DC fuse required for DC input voltage
Safety and protection:
Insulation voltage (PRI-SEC) 4.242 kV DC

Isolation voltage (PRI-GND) 2.2 kV DC
Insulation voltage (SEC-GND) 0.7 kV DC
Protection class I
Protection class IP20 (per EN 60529)
Feedback voltage ≤ DC 35 V
Overvoltage category II
Transient protection, primary Varistor
Overvoltage protection, secondary Internal protectiVDCe circuit
≤ 40 VDC (in case of an error)
Short circuit protection Yes
No-load proof Yes
Parallel operation Yes
Series connection Yes
MTBF > 500,000 h (per IEC 61709)
Connection data
Connection type (1) Input/Signaling

Connection technology
CAGE CLAMP®
WAGO terminal WAGO 721 Series
Solid conductor 0.08 … 2.5 mm² / 28 … 12 AWG
Fine-stranded conductor 0.08 … 2.5 mm² / 28 … 12 AWG
Strip length 8 … 9 mm / 0.31 … 0.35 inch
Connection type (2) Output
Connection technology 2
Push-in CAGE CLAMP®
WAGO terminal 2 WAGO 831 Series
Solid conductor (2) 0.5 … 10 mm² / 20 … 8 AWG
Strip length (2) 13 … 15 mm / 0.51 … 0.59 inch
Geometrical Data
Width 126 mm / 4.96 inch

Height 127 mm / 5 inch
Length from upper-edge of DIN-35 rail 198 mm / 7.795 inch
02.05.2019 Page 3/11
Length from upper-edge of DIN-35 rail 198 mm / 7.795 inch
Mechanical data
Type of mounting DIN-35 rail (EN 60715)
Material Data
Weight 2800 g
Environmental Requirements
Surrounding air (operating) temperature -25 … 70 °C (Device start at -40 °C type-tested)
Surrounding air (storage) temperature -25 … 85 °C
Relative humidity 5 … 96 % (no condensation permissible)
Derating -2.5 %/K (> 55 °C)
Pollution degree 2
Standards and specifications
Conformity marking 1
Standards/specifications EN 60950-1; EN 61204-3; UL 60950-1; UL 508; DNV GL
Commercial data
Country of origin DE
GTIN 4055143259187
Customs Tariff No. 85043180888
Approvals / Certificates
Ship Approvals
Certificate
Logo Approval Additional Approval Text name
DNV GL - TAA00000KT
Det Norske Veritas, Germanischer Lloyd
UL-Approvals
Certificate
Logo Approval Additional Approval Text name
UL UL 508 E255817
Underwriters Laboratories Inc.
UL UL 60950-1 E255815
Underwriters Laboratories Inc.
02.05.2019 Page 4/11
Compatible products
ferrule
Item no.: 216-201

Ferrule; Sleeve for 0.5 mm² / 20 AWG; insulated; electro-tin plated
Item no.: 216-202

Item no.: 216-203

Ferrule; Sleeve for 1 mm² / AWG 18; insulated; electro-tin plated
Item no.: 216-204

Ferrule; Sleeve for 1.5 mm² / AWG 16; insulated; electro-tin plated
Item no.: 216-205

Item no.: 216-206

Item no.: 216-207

Item no.: 216-208

Ferrule; Sleeve for 6 mm² / AWG 10; insulated; electro-tin plated; electrolytic copper; gastight crimped; www.wago.com/216-208
acc. to DIN 46228, Part 4/09.90
Item no.: 216-221

Item no.: 216-222

Item no.: 216-223

Item no.: 216-224

Item no.: 216-241

Ferrule; Sleeve for 0.5 mm² / 20 AWG; insulated; electro-tin plated; electrolytic copper; gastight www.wago.com/216-241
crimped; acc. to DIN 46228, Part 4/09.90
Item no.: 216-242
Item no.: 216-243
acc. to DIN 46228, Part 4/09.90
Item no.: 216-244
02.05.2019 Page 5/11
acc. to DIN 46228, Part 4/09.90

Item no.: 216-244
Ferrule; Sleeve for 1.5 mm² / AWG 16; insulated; electro-tin plated; electrolytic copper; gastight www.wago.com/216-244
Item no.: 216-246
Item no.: 216-262
Item no.: 216-263
acc. to DIN 46228, Part 4/09.90
Item no.: 216-264
Item no.: 216-266
Item no.: 216-267
acc. to DIN 46228, Part 4/09.90
Item no.: 216-284
Item no.: 216-286
Item no.: 216-287
acc. to DIN 46228, Part 4/09.90
Item no.: 216-288
acc. to DIN 46228, Part 4/09.90
Item no.: 216-301

Item no.: 216-302

Item no.: 216-321

Item no.: 216-322

tools
Item no.: 210-720

Operating tool with partially insulated shaft; Type 2, blade (3.5 x 0.5) mm
Item no.: 210-721

Operating tool with partially insulated shaft; Type 3, blade (5.5 x 0.8) mm
Item no.: 210-769

SCREWDRIVER
02.05.2019 Page 6/11
Marking accessories
Item no.: 2009-110

Marking strips; on reel; not stretchable; plain; snap-on type
Item no.: 2009-115

WMB-Inline; for Smart Printer; on reel; stretchable 5 - 5.2 mm; plain; snap-on type
Item no.: 2009-115/000-002 www.wago.com/2009-115

WMB-Inline; for Smart Printer; on reel; stretchable 5 - 5.2 mm; plain; snap-on type /000-002

WMB-Inline; for smartPRINTER; on reel; stretchable 5 - 5.2 mm; plain; snap-on type /000-006





Item no.: 2009-135

WMB-Inline; for Smart Printer; on reel; stretchable 5 - 5.2 mm; plain; snap-on type
Item no.: 2009-145

Mini-WSB Inline; for Smart Printer; on reel; stretchable 5 - 5.2 mm; plain; snap-on type

Mini-WSB Inline; for Smart Printer; on reel; stretchable 5 - 5.2 mm; plain; snap-on type /000-002



02.05.2019 Page 7/11


Mini-WSB Inline; for smartPRINTER; on reel; stretchable 5 - 5.2 mm; plain; snap-on type /000-023

Item no.: 210-831

Marking strips; on reel; 2.3 mm wide; plain; Self-adhesive
Item no.: 210-832

Marking strips; on reel; 3 mm wide; plain; Self-adhesive
Item no.: 248-501

Miniature WSB Quick marking system; plain; Marker width 5 mm; 10 strips with 10 markers per card

Mini-WSB marking card; as card; not stretchable; plain; snap-on type /000-002






Item no.: 793-501

WMB marking card; as card; not stretchable; plain; snap-on type

WMB marking card; as card; not stretchable; plain; snap-on type /000-002

02.05.2019 Page 8/11






Item no.: 793-5501

WMB marking card; as card; for terminal block width 5 - 17.5 mm; stretchable 5 - 5.2 mm; plain; snap-on www.wago.com/793-5501
type
Item no.: 793-5501/000-002

WMB marking card; as card; for terminal block width 5 - 17.5 mm; stretchable 5 - 5.2 mm; plain; snap-on
/000-002
type

WMB marking card; as card; stretchable 5 - 5.2 mm; plain; snap-on type /000-005






02.05.2019 Page 9/11

Downloads
Documentation
Bid Text
787-1644 Jan 15, 2016 doc Download

Stromversorgung EPSITRON 38.4 kB
Instruction Leaflet
Primary Switch Mode EPSITRON® CLASSIC Power pdf Download

170.2 kB
24 VDC, 40 A
Additional Information
Disposal; Electrical and electronic equipment, Packaging V 1.0.0 pdf Download

265.8 kB
Engineering-Software
Configuration and Commissioning Software
Used for line length calculation 1.3.4 zip Download

The conductor length calculation assists in planning the secondary fuse protection Mar 20, 2017 125.5 kB
for conductors to power supply devices from the EPSITRON® PRO power family (787-
8xx) as well as EPSITRON(R) CLASSIC Power family (787-16xx). After choosing a 787-
8xx and 787-16xx power supply unit, the desired conductor size and associated fuse
can be selected. The software tool then calculates the maximum conductor length at
which the fuse functions correctly, while also considering the conductor and transfer
resistances. The user can select a base load.
CAD/CAE - Smart Data

CAD data
3D Download 787-1644 URL Download
02.05.2019 Page 10/11
Product family
EPSITRON CLASSIC Power
EPSITRON® CLASSIC POWER: The Robust Power Supply – with Integrated TopBoost (Optional)
Show all products from the family

Subject to changes.
WAGO Kontakttechnik GmbH & Co. KG Do you have any questions about our products?
Hansastr. 27 We are always happy to take your call at +49 (571) 887-44222.
32423 Minden
Phone: +49571 887-0 | Fax: +49571 887-169
Email: info.de@wago.com | Web: www.wago.com
02.05.2019 Page 11/11

Data Sheet - Item Number: 787-1644 Switched-Mode Power Supply Classic 3-Phase 24 VDC Output Voltage 40 A Output Current Topboost DC Ok Contact

Uploaded by

Copyright:

Available Formats

Data Sheet - Item Number: 787-1644 Switched-Mode Power Supply Classic 3-Phase 24 VDC Output Voltage 40 A Output Current Topboost DC Ok Contact

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Data Sheet - Item Number: 787-1644 Switched-Mode Power Supply Classic 3-Phase 24 VDC Output Voltage 40 A Output Current Topboost DC Ok Contact

Uploaded by

Copyright:

Available Formats

Suitable for both parallel and series operation

Suitable for both parallel and series operation

Input voltage range (2 / 3) x AC 320 … 575 V; DC 450 … 800 V

Discharge current ≤ 1 mA

Nominal output voltage Uo nom DC 24 V (SELV)

Output voltage range DC 23 … 28.5 V (adjustable)

Nominal output power 960 W

Overload behavior Constant current

Signaling and communication

Signaling 1 x LED DC OK (green)

Power loss Pv ≤ 4.2 W (no load); ≤ 83.9 W (400 VAC; nominal load)

Max. power loss Pv max. 83.9 W (500 VAC / 24 VDC; 40 A)

Safety and protection:

Insulation voltage (PRI-SEC) 4.242 kV DC

Connection type (1) Input/Signaling

Width 126 mm / 4.96 inch

Length from upper-edge of DIN-35 rail 198 mm / 7.795 inch

Length from upper-edge of DIN-35 rail 198 mm / 7.795 inch

Type of mounting DIN-35 rail (EN 60715)

Standards and specifications

Item no.: 216-201

Item no.: 216-202

Item no.: 216-203

Item no.: 216-204

Item no.: 216-205

Item no.: 216-206

Item no.: 216-207

Item no.: 216-208

Item no.: 216-221

Item no.: 216-222

Item no.: 216-223

Item no.: 216-224

Item no.: 216-241

acc. to DIN 46228, Part 4/09.90

Item no.: 216-301

Item no.: 216-302

Item no.: 216-321

Item no.: 216-322

Item no.: 210-720

Item no.: 210-721

Item no.: 210-769

Item no.: 2009-110

Item no.: 2009-115

Item no.: 2009-115/000-002 www.wago.com/2009-115

Item no.: 2009-115/000-006 www.wago.com/2009-115

Item no.: 2009-115/000-007 www.wago.com/2009-115

Item no.: 2009-115/000-012 www.wago.com/2009-115

Item no.: 2009-115/000-017 www.wago.com/2009-115

Item no.: 2009-115/000-023 www.wago.com/2009-115

Item no.: 2009-115/000-024 www.wago.com/2009-115

Item no.: 2009-135

Item no.: 2009-145

Item no.: 2009-145/000-002 www.wago.com/2009-145

Item no.: 2009-145/000-005 www.wago.com/2009-145

Item no.: 2009-145/000-006 www.wago.com/2009-145

Item no.: 2009-145/000-007 www.wago.com/2009-145

Item no.: 2009-145/000-012 www.wago.com/2009-145

Item no.: 2009-145/000-012 www.wago.com/2009-145