PN7094

Pressure sensor with display

PN-010-RER14-QFRKG/US/ /V

1 alphanumeric display 4-digit red/green

2 LEDs Display unit / switching status
3 programming button
4 upper part of the housing can be rotated 345°

Product characteristics
Number of inputs and outputs Number of digital outputs: 2
Measuring range -1...10 bar -14.5...145 psi -0.1...1 MPa
Process connection threaded connection G 1/4 internal thread
Application
Special feature Gold-plated contacts
Measuring element ceramic-capacitive pressure measuring cell
Application for industrial applications
Media liquids and gases
Medium temperature [°C] -25...80
Min. bursting pressure 150 bar 2175 psi 15 MPa
Pressure rating 75 bar 1087 psi 7.5 Mpa
Vacuum resistance [mbar] -1000
Type of pressure relative pressure; vacuum
Electrical data
Operating voltage [V] 18...30 DC; (to SELV/PELV)
Current consumption [mA] < 35
Min. insulation resistance [MΩ] 100; (500 V DC)
Protection class III
Reverse polarity protection yes
Power-on delay time [s] < 0.3
ifm electronic gmbh • Friedrichstraße 1 • 45128 Essen — We reserve the right to make technical alterations without prior notice. — EN-GB — PN7094-02 — 13.04.2023 —
PN7094
Pressure sensor with display
PN-010-RER14-QFRKG/US/ /V

Integrated watchdog yes

Inputs / outputs
Number of inputs and outputs Number of digital outputs: 2
Outputs
Total number of outputs 2
Output signal switching signal; IO-Link; (configurable)
Electrical design PNP/NPN
Number of digital outputs 2
Output function normally open / normally closed; (parameterisable)
Max. voltage drop switching [V]
2.5
output DC
Permanent current rating of [mA]
150; (200 (...60 °C) 250 (...40 °C))
switching output DC
Switching frequency DC [Hz] < 170
Short-circuit protection yes
Type of short-circuit
pulsed
protection
Overload protection yes
Measuring/setting range
Measuring range -1...10 bar -14.5...145 psi -0.1...1 MPa
Factory setting / CMPT = 2
Set point SP -0.9...10 bar -13.5...145 psi -0.09...1 MPa
Reset point rP -0.95...9.95 bar -14...144.5 psi -0.095...0.995 MPa
Min. difference between SP 0.05 bar 1 psi 0.005 MPa
and rP
In steps of 0.05 bar 0.5 psi 0.005 MPa
Status_B High Resolution / CMPT = 3
Set point SP -0.92...10 bar -13.3...145 psi -0.092...1 MPa
Reset point rP -0.97...9.95 bar -14...144.3 psi -0.097...0.995 MPa
Min. difference between SP 0.05 bar 0.8 psi 0.005 MPa
and rP
In steps of 0.01 bar 0.1 psi 0.001 MPa
Accuracy / deviations
Switch point accuracy
< ± 0,5
[% of the span]
Repeatability [% of the span] < ± 0,1; (with temperature fluctuations < 10 K)
Characteristics deviation
< ± 0,25 (BFSL) / < ± 0,5 (LS); (BFSL = Best Fit Straight Line; LS = limit value setting)
[% of the span]
Hysteresis deviation
< ± 0,25
[% of the span]
Long-term stability
< ± 0,05; (per 6 months)
[% of the span]
Temperature coefficient zero
point < ± 0,2; (0...80 °C)
[% of the span / 10 K]
Temperature coefficient span
< ± 0,2; (0...80 °C)
[% of the span / 10 K]

ifm electronic gmbh • Friedrichstraße 1 • 45128 Essen — We reserve the right to make technical alterations without prior notice. — EN-GB — PN7094-02 — 13.04.2023 —
PN7094
Pressure sensor with display
PN-010-RER14-QFRKG/US/ /V

Response times
Response time [ms] <3
Delay time programmable dS, [s]
0...50
dr
Software / programming
Parameter setting options hysteresis / window; normally open / normally closed; switching
logic; switch-on/switch-off delay; Damping; Display unit
Interfaces
Communication interface IO-Link
Transmission type COM2 (38,4 kBaud)
IO-Link revision 1.1
SDCI standard IEC 61131-9
SIO mode yes
Required master port type A; (when pin 2 not connected: B)
Supported DeviceIDs Type of operation DeviceID
Factory setting / CMPT = 2 403
Status_B High Resolution / CMPT = 3 601
PN7004 311
Note For further information please see the IODD PDF file under "Downloads"
Factory setting / CMPT = 2
Profiles Smart Sensor: Process Data Variable; Device Identification, Device Diagnosis
Min. process cycle time [ms] 2.3
IO-Link resolution pressure [bar] 0.01
IO-Link resolution pressure [MPa] 0.001
IO-Link process data function bit length
(cyclical) pressure 14
binary switching information 2
IO-Link functions (acyclical) application specific tag
Status_B High Resolution / CMPT = 3
Profiles Smart Sensor ED2: Digital Measuring Sensor
(0x000A), Identification and Diagnosis (0x4000)
Min. process cycle time [ms] 3
IO-Link resolution pressure [bar] 0.005
IO-Link resolution pressure [MPa] 0.0005
IO-Link process data function bit length
(cyclical) pressure 16
device status 4
binary switching information 2
IO-Link functions (acyclical) application specific tag
Operating conditions
Ambient temperature [°C] -25...80
Storage temperature [°C] -40...100
Protection IP 65; IP 67

ifm electronic gmbh • Friedrichstraße 1 • 45128 Essen — We reserve the right to make technical alterations without prior notice. — EN-GB — PN7094-02 — 13.04.2023 —
PN7094
Pressure sensor with display
PN-010-RER14-QFRKG/US/ /V

Tests / approvals
EMC DIN EN 61000-6-2
DIN EN 61000-6-3
Shock resistance DIN EN 60068-2-27 50 g (11 ms)
Vibration resistance DIN EN 60068-2-6 20 g (10...2000 Hz)
MTTF [years] 260
UL approval UL Approval no. J001
Pressure Equipment Directive Sound engineering practice; can be used for group 2 fluids; group 1 fluids on request
Mechanical data
Weight [g] 241.7
Materials stainless steel (1.4404 / 316L); PBT+PC-GF30; PBT-GF20; PC
Materials (wetted parts) stainless steel (1.4404 / 316L); ceramics; FKM
Min. pressure cycles 100 million
Tightening torque [Nm] 25...35; (recommended tightening torque; depends on lubrication, seal and pressure rating)
Process connection threaded connection G 1/4 internal thread
Displays / operating elements
Display Display unit 3 x LED, green (bar, psi, MPa)
switching status 2 x LED, yellow
measured values alphanumeric display, red/green 4-digit
Remarks
Pack quantity 1 pcs.
Electrical connection
Connector: 1 x M12; coding: A; Contacts: gold-plated

ifm electronic gmbh • Friedrichstraße 1 • 45128 Essen — We reserve the right to make technical alterations without prior notice. — EN-GB — PN7094-02 — 13.04.2023 —
PN7094
Pressure sensor with display
PN-010-RER14-QFRKG/US/ /V

Connection

OUT1 switching output

IO-Link
OUT2 switching output
colours to DIN EN 60947-5-2
Core colours :
BK = black
BN = brown
BU = blue
WH = white

ifm electronic gmbh • Friedrichstraße 1 • 45128 Essen — We reserve the right to make technical alterations without prior notice. — EN-GB — PN7094-02 — 13.04.2023 —