EX-6 series

E' E

D&D'

G H I J

A B
5 780 mm 7 480 mm 1 920 mm 6 035 mm 5 990 mm 6 430 mm 6 660 mm 6 990 mm 795 mm 800 mm 5 400 mm 5 620 mm 1 880 mm

A B C D D E E F G H I J K

Distance between tumblers Undercarriage length Counterweight clearance Rear-end swing radius Rear-end length Overall width of upperstructure Overall width Overall height of cab Min. ground clearance Track shoe width Crawler width Undercarriage width Track height

HYDRAULIC EXCAVATOR

Engine Gross Power : 810 kW (1 086 HP) Operating Weight : EX1900-6

Backhoe BE: 192 000 kg Loading Shovel: 191 000 kg Loading Shovel Bucket : Heaped:11.0 - 15.0 m Backhoe Bucket : SAE, PCSA Heaped:4.4 - 12.0 m CECE Heaped:3.8 - 10.6 m

SPECIFICATIONS
EX1900-6
ENGINE
Model .................................. Cummins QSKTA38-CE . Type ..................................... Water-cooled, 4-cycle,V12-cylinder, turbo-charged and after cooled, direct injection chamber-type diesel engine Rated power SAE J1995, gross ............. 810 kW (1 086 HP) at 1 800 min- (rpm) Net ................................... 775 kW (1 039 HP) at 1 800 min- (rpm) . Maximum torque .................. 4 725 Nm (482 kgfm) at 1 300 min- (rpm) Piston displacement ............. 37.8 L Bore and stroke .................... 159 mm X 159 mm Starting system .................... 24 V electric motor Batteries .............................. 4 x 12 V , 4 x 220 AH . Cold starting ........................ Ether aided .

Backhoe
Boom Arm Bucket Quan. 2 2 2 Bore 280 mm 250 mm 200 mm Rod diameter 200 mm 170 mm 150 mm

UPPERSTRUCTURE
Revolving Frame
A deep, full-reinforced box section. Heavy-gauge steel plates used for ruggedness.

UNDERCARRIAGE
Tracks
Tractor-type undercarriage. Dual-flanged-type bolt linkage for side frame and X-form center frame assures durability. Heavy-duty track frame of all-welded, stress-relieved structure. Top-grade materials used for toughness. Lifetime-lubricated induction-hardened track rollers, idlers and sprockets with floating seals. Track shoes of durable box-type cast steel with triple grousers. Durable strut-reinforced track links with track guards. Hydraulic track adjuster provided with N2 gas accumulator with relief valve. Track adjuster provided with protection device against abnormal tension. Travel motion alarm device.

Hydraulic Filters
All hydraulic circuits have high-quality hydraulic filters for protection against oil contamination and longer life of hydraulic components. Full flow filter High pressure strainer (In main & swing pump delivery line) Drain filter (For all plunger type pumps & motors) Pilot filter By-pass filter Qty. 3 3 1 1 1 10 m 80 meshes 10 m 10 m 5 m

Maintenance accessibility is the major feature in the lay-out of deck machinery. Sidewalks provides easy access to engine, hydraulic and electrical components. ISO-meet stairs and handrails. Sidewalks and stairs are provided with skid-resistant plates.

Deck Machinery

Tractor-type Undercarriage
Triple grouser track shoes of induction-hardened cast steel. Shoe width ............................................................................... 800 mm

Numbers of Rollers and Shoes on Each Side

Upper rollers ....................................................................................... 3 Lower rollers ....................................................................................... 8 Track shoes ...................................................................................... 49

HYDRAULIC SYSTEM
Hitachi's ETS (Electronic Total control System) can achieve maximum job efficiency by reducing fuel consumption and noise levels, while maximizing productivity through the optimization of engine-pump functions with excellent controllability increasing operator comfort. E-P Control (Computer-aided Engine-Pump Control system) Main pumps regulated by electric engine speed sensing control system. OHS (Optimum Hydraulic System) 6 main pumps and 3 valves system enable both independent and combined operations of all functions. FPS (Fuel-saving Pump System) FPS minimizes energy loss with superior performance in fine control. Auto-idling system for saving fuel and reducing noise. Hydraulic drive cooling-fan system for oil cooler. Forced-lubrication and forced-cooling pump drive system.

These filters are centralized in arrangement for facilitating maintenance.

CONTROLS
2 Implement Levers
Electric joystick control levers. Right lever is for boom and bucket control, left lever for swing and arm control. For loading shovel, 2 pedals provided for opening/closing the bottom dump bucket.

Travel Device
Each track driven by high-torque, axial piston motors, allowing counter rotation of tracks. 2-stage planetary gear plus spur gears reduction device. Parking brake of spring-set/hydraulic-released disc type. This parking brake is manually releasable. Travel speeds ....................................................... High : 0 to 2.8 km/h Low : 0 to 2.1 km/h Maximum traction force .................................... 941.5 kN (96 000 kgff) Gradeability ...................................................... 58 % (30 degree) max.
1 2 3 4 4 10 5 11 5 6 7 8 12 14 3 2 6 7 8 16 15 9 10 11 12 13 Diesel Engine Pump Drive Unit Hydraulic Pump x 6 Hydraulic Oil Cooling Fan Motor Hydraulic Oil Cooler Engine Radiator LTA Radiator Fuel cooler Pump Transmission Oil Cooler Engine-Pump Bulkhead Control Valve x 3 Swing Device x 2 Center Joint 14 15 16 17 18 19 20 21 22 23 24 25 Hydraulic Tank Fuel Tank Battery Unit Lubricator High-Pressure Strainer x 3 Reserve Tank (coolant) Air Filter x 2 (Outer/Inner) Muffler Fuel Filter (Water Separator) Cab Ladder Retractable-Type Ladder

2 Travel Levers with Pedals

Remote-controlled hydraulic servo system. Independent drive at each track allows counter rotation of tracks.

WEIGHTS AND GROUND PRESSURE

Loading Shovel
Equipped with 11.0 m3 (heaped) bottom dump bucket Shoe type Shoe width Operating weight Triple 800 mm 191 000 kg grousers Ground pressure 183 kPa (1.87 kgf/cm2)

17

. Main pumps ............. 6 variable-displacement, piston pumps for front attachment, travel and swing Max.oil flow ............. 6 X 335 L/min . Pilot pump ................ 1 gear pump Max.oil flow ............. 110 L/min .

Equipped with 8.3 m boom, 3.6 m arm and 12.0 m3 (SAE, PCSA heaped) bucket Shoe type Triple grousers Shoe width 800 mm Operating weight 192 000 kg Ground pressure 184 kPa (1.88 kgf/cm2)

Backhoe

Relief Valve Settings

Boom/arm/bucket circuit ............................................................ 29.4 MPa (300 kgf/cm) Travel circuit .................................................. 29.4 MPa (300 kgf/cm) Swing circuit ................................................. 29.4 MPa (300 kgf/cm) . Pilot circuit .................................................... 4.4 MPa (45 kgf/cm)

9 13

2 high-torque, axial-piston motors with two-stage planetary gear run in oil. Diametrically-opposed,well-balanced arrangement of 2 swing devices. Swing circle with dirt seals is a heavy-duty, single-row, sheartype ball bearing. Induction-hardened internal swing circle gear and pinion immersed in lubricant. Parking brake of spring-set/hydraulicreleased disc type. This parking brake is manually releasable. Swing speed ............................................................... 4.7 min- (rpm) .

Swing Device

SERVICE REFILL CAPACITIES

litters 4 140 395 166 26 2 x 67 2 x 70 2 200 1 050

High-strength piston rods and tubes adopted. Cylinder cushion mechanisms are provided for boom, arm bucket and dump cylinders. Bucket cylinders of loading shovel are provided with protector.
1 Left Console Left Control Lever/Horn Switch Left Travel Pedal Left Travel Lever Right Travel Lever Right Travel Pedal Right Control Lever/Horn Switch Right Console Operators Seat 10 11 12 13 14 15 16 17 Bucket Close Pedal (For Loading Shovel) Bucket Open Pedal (For Loading Shovel) Pilot Control Shut-Off Lever Rear Console Emergency Engine Stop Switch Engine Speed Control Dial Key Switch Monitor Display

Hydraulic Cylinders

Cylinder Dimensions Loading shovel

Boom Arm Bucket Dump Level Quan. 2 1 2 2 1 Bore 280 mm 240 mm 225 mm 190 mm 280 mm Rod diameter 200 mm 180 mm 170 mm 110 mm 200 mm

2 3 4 5 6 7 8 9

Operator's Cab
The sturdy cab, with the top guard conforming to OPG Level ll (ISO), helps protect the operator from falling objects. Independent, pressurized, 1 800 mm wide, 2 150 mm high, roomy 7.5m cab with tinted-glass windows features all-round visibility. Air-suspension type, fully adjustable reclining seat with armrests; movable with or without front & swing control levers by slide. Instruments and control panel are within easy reach of the operator. 3 air conditioner system. Noise level ............................................... 72 dB(A) in the cab; on max. engine speed under no-load Eye level height .................................................................... 6 030 mm

Fuel tank Engine coolant Engine oil Pump drive Swing device (2 units) Travel device (2 units) Hydraulic system Hydraulic oil tank

SPECIFICATIONS
LOADING SHOVEL ATTACHMENTS
Boom and arm are of all-welded, low-stress, high-tensile strength steel fullbox section design. Efficient, automatic level crowding achieved by onelever control as the parallel link mechanism keeps the bucket digging angle constant, and level cylinder circuit maintains the bucket height constant (Auto-Leveling Crowd Mechanism). 110 kgf/mm tensile strength steel bucket bottom plate Dual-support-type boom/arm/bucket pin linkage Pin seals (in all portions) plus O-ring at arm top

BACKHOE ATTACHMENTS
Boom and arm are of all-welded, low-stress, full-box section design. Bucket of all-welded, high-strength steel structure. Bucket/arm joint pins are floating type. Replaceable thrust plates are provided with bucket/arm joint part. Autolubrication system for all pins is standard.

Bucket
Capacity (heaped) 11.0 m 12.0 m 15.0 m Width 3 260 mm 3 260 mm 4 260 mm No.of teeth 6 6 8 Weight 15 100 kg 15 520 kg 16 820 kg Type Bottom dump type general purpose bucket Bottom dump type light duty bucket Bottom dump type coal handling bucket

Bucket
Capacity SAE, PCSA heaped 4.4 m 4.8 m 6.0 m 8.0 m 9.6 m 12.0 m CECE heaped 3.8 m 4.2 m 5.3 m 7.0 m 8.4 m 10.6 m Width Without side cutters 2 070 mm 1 650 mm 1 950 mm 2 325 mm 2 710 mm 3 050 mm No.of teeth 5 5 5 5 5 6 Weight 4 830 kg 5 180 kg 6 390 kg 7 430 kg 8 080 kg 13 200 kg 8.30 m boom 3.60 m arm Recommendation 8.70 m boom 11.80 m boom 4.00 m 5.50 m 4.00 m 5.50 m 7.00 m arm arm arm arm arm

WORKING RANGES

: General purpose for materials with density of 1 800 kg/m or less

Meter 14 12 10 8 6 4 2 0 2 4 6 8 10 Ground Line Unit: mm

H G E E'

EH1700-3

F A

C
18 16 14 12 10 8

B D
6 4

Bucket Capacity (heaped) A Min. digging distance B Min. level crowding distance C Level crowding distance D Max. digging reach E Max. cutting height E Max. dumping height F Max. digging depth Working radius at max. G dumping height H Max. bucket opening width Bucket 11.0 m Arm crowding force 12.0 m 15.0 m Bucket 11.0 m Breakout force 12.0 m 15.0 m
Note : Data in

11.0 m3 5 550 7 650 4 820 13 430 14 610 10 440 5 920 6 890 2 100 710 kN (72 400 kgf) 706 kN (72 000 kgf) 719 kN (73 300 kgf) 660 kN (67 300 kgf) 606 kN (61 800 kgf) 612 kN (62 400 kgf)

WORKING RANGES

Meter 18 16 14 12 10 8 6 4 2 0 2 4 6 8 10 12 14 22 20 18 16 14 12 10 8 6 4 2 0 Meter

Unit: mm

C D

are those of the coal bottom dump bucket.

0 Meter

EH1700-3
B B' 8' A' A E

Ground Line

Boom length Arm length Bucket Capacity (SAE, PCSA heaped) A Max. digging reach Max. digging reach A' (on ground) Max. digging B depth Max. digging B' depth (8' level) C Max. cutting height Max. dumping D height E Max. vertical wall Bucket digging ISO force SAE: kN (kgf) PCSA Arm crowd ISO force SAE: kN (kgf) PCSA

8.30 m 3.60 m 12.0 m3 15 250 14 770 8 180 8 070 14 140 9 060 5 520 671 (68 400) 617 (62 900) 620 (63 200) 609 (62 100)

8.70 m 11.80 m 4.00 m 5.50 m 4.00 m 5.50 m 7.00 m 9.6 m3 8.0 m3 6.0 m3 4.8 m3 4.4 m3 16 070 17 500 19 390 20 860 21 850 15 630 17 090 19 020 20 520 21 530 9 230 10 730 11 780 13 280 14 430 9 120 10 640 11 670 13 190 14 350 14 480 15 010 17 380 18 140 17 900 9 200 6 630 649 (66 200) 588 (60 000) 575 (58 600) 559 (57 000) 9 810 11 820 12 660 13 200 7 430 651 (66 400) 588 (60 000) 545 (55 600) 534 (54 400) 10 050 649 (66 200) 588 (60 000) 575 (58 600) 559 (57 000) 11 010 663 (67 600) 588 (60 000) 546 (55 700) 534 (54 400) 11 260 489 (49 900) 435 (44 300) 425 (43 300) 416 (42 400)

EQUIPMENT
STANDARD EQUIPMENT
ENGINE
140 A alternator Heavy-duty type air cleaner with dust ejector Cartridge-type engine oil filter Cartridge-type engine oil bypass filter Cartridge-type fuel filter Water filter Fan guard Isolation-mounted engine Pre-lubrication system Auto-idle system Emergency engine stop system Standard equipment may vary by country, so please consult your Hitachi dealer for details.

TRANSPORTATION
MONITOR SYSTEMS
Meters: Hourmeter. Fuel gauge. Hydraulic oil temperature gauge. Engine coolant temperature gauge. Tachometer. Engine oil pressure gauge. Engine oil temperature gauge. Battery voltage gauge. Ambient temperature. Pilot lamps (Green): Pre-lubrication. Auto-Idle. Travel Mode. Warning lamps (Red): Alternator. Engine stop. Coolant overheat. Hydraulic oil level. AutoLubrication. Fast-filling. Tension. Electric lever. Emergency engine stop. Top valve. Engine over run. Coolant level. Engine oil pressure. Pump transmission oil level indicator. Warning lamp (Yellow): Exhaust temperature. Fuel temperature. Engine warning. Hydraulic oil overheat. Stairway position. Electrical equipment box. Pump contamination. Air cleaner restriction. Alarm buzzers: Overheat. Engine coolant pressure. Engine coolant level. Fuel temperature. Engine oil pressure. Engine oil temperature. Air intake manifold temperature. Crank case pressure. Pump transmission oil level. Hydraulic oil level. Stop valve close. Fast-fill system panel position (option) Ladder position. Electric lever fault.

UPPERSTRUCTURE
Lockable machine covers 25 300 kg counterweight Hydraulic drive grease gun with hose reel Retractable ladder with spring-type balancer Swing parking brake

Easily assembled owing to local assembling system requiring no welding.

UPPERSTRUCTURE
Unit: mm

Cab assembly Weight : 1 740 kg

Cab bed Weight : 2 560 kg

2 820

Main frame assembly Weight: 26 900 kg

UNDERCARRIAGE
Travel parking brake Travel motion alarm device Hydraulic track adjuster with N2 gas accumulator and relief valve 800 mm triple grouser shoes

2 830

2 520

E-P control system OHS (Optimum Hydraulic System) FPS (Fuel-saving Pump System) Hydraulic drive cooling-fan system Forced-lubrication and forced cooling pump drive system Control valve with main relief valve Suction filter Full-flow filter Bypass filter Pilot filter Drain filter High-pressure strainer

MISCELLANEOUS
Standard tool kit Stairs and handrails (Meeting ISO) Recirculation air filter for air conditioner Ventilation air filter for air conditioner 12 V power terminal board Stop valve for transport and reassembly Auto-lubrication system (Lincoln) for front-attachment pins, swing bearing, and center joint

2 920

HYDRAULIC SYSTEM

7 330 Width : 1 880 Width : 1 860 Width : 3 500

Engine unit Weight : 14 600 kg

Fuel tank Weight : 2 060 kg

Step Weight : 147 kg

Door Weight : 38 kg

Door Weight : 31 kg

The sturdy cab, with the top guard conforming to OPG Level ll (ISO), helps protect the operator from falling objects. Fluid-filled elastic mounts. Laminated glass windshield. Reinforced/ tinted (bronze color) glass side and rear windows. Parallel-link-type intermittent windshield wiper. Front windshield washer. Adjustable reclining seat with air suspension. Footrest. Air horn with electric compressor. Auto-tuning AM-FM radio with digital clock. Seat belt. Storage spaces. Floor mat. Air conditioner with defroster. Rearview mirror. Evacuation hammer. Emergency escape device. Trainer's seat. Pilot control shut-off lever.

3 280

2 620

3 020

1 920

5 620 Width : 2 230

2 400
Width : 1 170

1 590

688

588

LIGHTS
6 working lights. 2 entrance lights. 3 maintenance lights. 2 cab lights.

Width : 634

Width : 153

Width : 153

Sidewalk Weight : 74 kg

Sidewalk Weight : 70 kg

Sidewalk Weight : 77 kg

Step Weight : 70 kg

Sidewalk Weight : 357 kg

612

711

660

819

1 850

1 770

1 810

1 070 2 080

OPTIONAL EQUIPMENT
High brightness working lights. Back and right side color monitor camera. Folding stairs with wide steps. Wiggins couplers. Engine oil reserve system. Full track guard. Cold weather package.

Optional equipment may vary by country, so please consult your Hitachi dealer for details. Satellite data transmitting system. Travel motor guard. Travel device guard.

Width : 1 290

Width : 1290

Width : 1 290

Width : 1 330

Width : 1 150

Air cleaner and muffler Weight : 613 kg

Bracket Weight : 236 kg

Step Weight : 25 kg

Ladder Weight : 292 kg

Sidewalk Weight : 153 kg

Bracket Weight : 15 kg

1 570

2 070

2 260

735

693

1 400

1 300 813 2 240 Width : 695

309

3 090 Width : 1 210 Width : 748 Width : 31

Width : 748

Width : 55

593

1 700

2 020

CAB

3 260

TRANSPORTATION
Unit: mm

UNDERCARRIAGE
Unit: mm

Fender Weight : 96 kg

Sidewalk Weight : 272 kg

Sidewalk Weight : 209 kg

Sidewalk Weight : 157 kg

Hose reel Weight : 51 kg Track center frame assembly Weight : 16 800 kg Track side frame assembly Weight: 22 100 kg x 2

680

1 700

1 700

1 710

1 360

2 100 Width : 950 Handrail Weight : 33 kg Handrail Weight : 32 kg

2 300 Width : 944 Handrail Weight : 37 kg

1 770 Width : 950 Handrail Weight : 47 kg

1 350 Width : 965 Handrail Weight : 20 kg Width : 204 Handrail Weight : 18 kg

3 350 7 475

1 875

602

560

Width : 4 740

Width : 1 630

1 020

1 020

1 020

1 190

1 160

1 640

2 140 Width : 322 Handrail Weight : 16 kg Handrail Weight : 46 kg

1 390 Width : 374 Handrail Weight : 27 kg

2 050

2 960

763

A : Center cover Weight: 30 kg x 2

1 595

B : Side cover Weight: 78 kg x 2

1 620

C : Stay Weight: 79 kg

Step Weight: 14 kg
625 120

509 Width : 373

1 170

775

Handrail Weight : 70 kg

Handrail Weight : 13 kg

Handrail Weight : 83 kg

Handrail Weight : 14 kg

A Width : 440

B Width : 380 Width : 100 Width : 530

1 020

1 020

1 180

1 440

1 020

1 320

1 020

LOADER ATTACHMENT
870 Width : 55 Handrail Weight : 24 kg Boom & Arm assembly Weight : 25 260 kg Bucket assembly Unit: mm

1 190 Width : 233 Handrail Weight : 65 kg

957 Width : 489 Handrail Weight : 31 kg

2 130 Width : 223

755 Width : 851 Handrail Weight : 19 kg

832 Width : 55 Handrail Weight : 16 kg

1 950 Width : 461 Handrail Weight : 19 kg

Handrail Weight : 18 kg

1 105

Width : 413

Width : 281

Width : 373

4 230

1 010

1 336

1 190

1 100

1 550

755 Width : 887

1670 Width : 517 Counterweight Weight : 25 300 kg

687 Width : 637

650 618 Width : 339 Width : 258

1 550

618 Width : 339

500
10 190

1 280

3 650

Width : 240 Handrail Weight : 35.7 kg

Width : 2 160

Handrail Weight : 36.1 kg

Boom cylinder Weight : 2 270 kg 1 010

4 270 Capacity (heaped) 11.0 m 12.0 m 15.0 m A 3 480 mm 3 730 mm 3 690 mm B 3 130 mm 3130 mm 3 130 mm Width 3 440 mm 3 440 mm 4 140 mm Weight 15 100 kg 15 520 kg 16 820 kg

1 340

1 010

570

2 780

2 950

5 600 Width : 1 220 Width : 1 260 Width : 855

Width : 440

TRANSPORTATION
BACKHOE ATTACHMENT
Unit: mm

LIFTING CAPACITIES

Bucket assembly

Boom assembly

A: Load radius B: Load point height C: Lifting capacity

METRIC MEASURE Rating over-side or 360 degrees Rating over-front Unit: 1 000 kg

B
Conditions Load point height 6m 8m 10 m

Load radius 12 m 14 m

16 m

18 m

20 m

At max. reach meter

Boom 8.30 m Arm 3.60 m Bucket SAE,PCSA : 12.0 m CECE : 10.6 m Shoes 800 mm Width 2 050 mm 2 050 mm 2 050 mm Weight 18 700 kg 19 100 kg 22 700 kg

Capacity SAE, PCSA CECE heaped heaped 4.4 m 3.8 m 4.8 m 4.2 m 6.0 m 5.3 m 8.0 m 7.0 m 9.6 m 8.4 m 12.0 m 10.6 m Note : * with wear plate

A 2 630 mm 2 950 mm 2 950 mm 3 090 mm 3 090 mm 3 410 mm

B 2 180 mm 2 470 mm 2 470 mm 2 480 mm 2 480 mm 2 680 mm

Width 2 070 mm 1 650 mm 1 950 mm 2 325 mm 2 710 mm 3 050 mm

weight (with bucket pins) 4 830 kg 5 180 kg 6 390 kg 7 430 kg 8 080 kg 12 900 kg*

Boom length 8.30 m 8.70 m 11.80 m

A 8 720 mm 9 120 mm 12 220 mm

B 3 400 mm 3 500 mm 3 700 mm

10 m 8 m *25.5 6 m *29.4 4 m *32.9 2 m 0 (Ground) 31.1 45.8 *46.8 30.4 -2 m *53.1 *53.1 *41.4 *41.4 *30.5 -4 m *30.3 *30.3 -6 m 10 m 8 m 6 m *41.9 4 m 2 m 0 (Ground) 49.7 49.1 -2 m *48.6 *48.6 *45.4 -4 m *46.7 *46.7 *36.8 -6 m 10 m 8 m 6 m 4 m 2 m 0 (Ground) -2 m -4 m -6 m -8 m

*17.2 *17.2 *25.5 *22.1 *22.1 *29.4 *23.7 *23.7 *32.9 22.9 *25.4 *34.8 21.9 *26.3 *34.3 21.5 *25.3 *30.5 *16.1 *21.9 *23.2 *25.3 26.4 25.3 24.7 25.0 *16.1 *21.9 *23.2 *25.3 *17.0 *17.0 *27.4 19.6 *19.7 *28.7 *28.5 *25.3

*7.7 *7.7 *8.1 *8.1 *8.9 *8.9 *10.2 *10.2 *10.5 *10.5

14.5 14.8 14.7 14.3 13.6

Boom 8.0 m Arm 4.00 m Bucket SAE,PCSA : 9.6 m CECE : 8.4 m Shoes 800 mm

*26.7 *41.9 *30.9 *34.7 *50.6 34.5 *49.5 33.6 *45.4 33.7 *36.8 *26.8

*26.7 *30.9 *34.7 *37.0 *37.1 *34.5 *26.8

*9.84 *9.69 *9.90 *10.4 *11.4 *13.0 *14.9

*9.84 *9.69 *9.90 *10.4 *11.4 *13.0 *14.9

14.4 15.1 15.4 15.5 15.2 14.5 13.4

Arm assembly

Boom 8.0 m Arm 5.50 m Bucket SAE,PCSA : 8.0 m CECE : .0 m Shoes 800 mm

Boom cylinder Weight : 2 270 kg

*52.3 *56.4 *58.3 *43.6

*52.3 *56.4 *58.3 *43.6

*34.7 *42.9 *48.0 48.7 *48.2 *43.3 *32.9

*34.7 *42.9 *48.0 *49.7 *48.2 *43.3 *32.9

*26.6 *31.2 *34.7 33.5 32.9 *32.5 *22.8

*19.6 *19.6 *26.6 *22.2 *22.2 *31.2 *24.8 *24.8 *34.7 25.6 *27.0 *36.5 24.5 *28.1 *36.0 24.1 *27.5 *32.5 *23.5 *23.5 *22.8

*17.6 *18.2 *19.5 20.0 19.1 18.5

*17.6 *18.2 *19.5 *20.9 *22.1 *22.3

*10.1 *10.0 *10.2 *10.8 *11.7 *13.1 *15.4 *14.1

*10.1 *10.0 *10.2 *10.8 *11.7 *13.1 *15.4 *14.1

15.9 16.6 16.9 16.9 16.6 16.0 15.1 13.7

B
4 270

Notes:

1.Ratings are based on SAE J1097. 2.Lifting capacity of the EX Series does not exceed 75% of tipping load with the machine on firm, level ground or 87% full hydraulic capacity. 3.The load point is a hook (not standard equipment) loaded on the back of the bucket. 4.*Indicates load limited by hydraulic capacity.

570

Width : 440
Arm length 3.60 m 4.00 m 5.50 m 7.00 m A 5 000 mm 5 280 mm 6 780 mm 8 370 mm B 2 060 mm 1 950 mm 1 700 mm 2 140 mm Width 1 720 mm 1 720 mm 1 720 mm 1 780 mm Weight 10 600 kg 10 500 kg 11 500 kg 10 900 kg

10

11

Rating over-side or 360 degrees Rating over-front Unit: 1 000 kg

Load radius 12 m 14 m At max. reach meter *13.6 *13.6 *14.5 *15.9 *17.4 17.7 16.8 16.4 16.5 17.2 *13.6 *13.6 *14.5 *13.5 *13.5 *15.9 *14.0 *14.0 *17.4 14.4 *14.8 *18.7 13.7 *15.7 *19.7 13.1 *16.3 *20.1 13.0 *16.4 *19.7 *17.9 *12.3 *12.1 11.3 10.5 10.1 10.2 10.7 12.0 *13.6 *12.7 *10.0 *9.91 *9.93 *10.0 9.39 9.05 9.08 9.49 10.3 *11.4 *11.1 *10.0 *8.11 *7.68 *7.44 *7.37 *7.45 *7.68 *8.07 *8.64 *9.46 *10.6 *12.0 *11.9 *12.3 *12.1 *11.9 *11.9 *12.1 *12.5 *13.2 *13.8 *13.6 *12.7 *10.0 *9.91 *9.93 *10.0 *10.2 *10.5 *10.8 *11.1 *11.3 *11.4 *11.1 *10.0 *8.11 *7.68 *7.44 *7.37 *7.45 *7.68 *8.07 *8.64 *9.46 *10.6 *12.0 *11.9 17.0 17.9 18.5 18.8 18.8 18.6 18.1 17.3 16.2 14.6 17.6 18.7 19.5 20.0 20.2 20.3 20.1 19.6 18.9 17.9 16.5 14.6 18.8 19.8 20.5 21.0 21.3 21.3 21.1 20.8 20.1 19.2 18.0 16.4

Conditions

Load point height 12 m 10 m 8 m 6 m 4 m 2 m 0 (Ground) -2 m -4 m -6 m -8 m

6m

8m

10 m

16 m

18 m

20 m

Boom 11.80 m Arm 4.00 m Bucket SAE,PCSA : 6.0 m CECE : 5.3 m Shoes 800 mm

*16.8 *19.2 *21.7 22.9 21.9 21.5 *29.8 *31.1 21.6 *34.7 *34.7 *28.6 *28.6 22.2 *29.5 *29.5 *24.3 *24.3 *18.9

*16.8 *19.2 *21.7 *23.7 *24.9 *25.3 *24.7 *22.9 *18.9

Boom 11.80 m Arm 5.50 m Bucket SAE,PCSA : 4.8 m CECE : 4.2 m Shoes 800 mm

14 m 12 m 10 m 8 m 6 m 4 m 2 m 0 (Ground) -2 m 30.5 *31.1 -4 m *34.8 *34.8 *38.0 *38.0 *29.7 *29.7 -6 m *42.4 *42.4 *33.9 *33.9 *26.9 *26.9 -8 m *27.4 *27.4 *21.8 *21.8 -10 m

*16.2 *18.8 *21.1 *22.9 22.6 22.3 22.6 *21.1 *16.2

*16.2 *18.8 *21.1 *22.9 *23.9 *24.1 *23.3 *21.1 *16.2

*12.0 *13.4 *15.1 *16.7 *18.0 17.4 17.1 17.3 *16.2

*12.0 *13.4 *15.1 *16.7 *18.0 *18.8 *19.1 *18.4 *16.2

*10.8 *10.4 *10.9 *11.7 *12.8 *13.8 14.1 13.6 13.4 13.9

*10.8 *10.4 *10.9 *10.7 *10.7 *11.7 *10.9 *10.9 *12.8 *11.4 *11.4 *13.8 11.4 *12.0 *14.7 10.9 *12.5 *15.3 10.8 *12.6 *15.3 *14.2

Boom 11.80 m Arm .00 m Bucket SAE,PCSA : 4.4 m CECE : 3.8 m Shoes 800 mm

14 m 12 m 10 m 8 m 6 m *18.2 4 m *20.9 2 m 0 (Ground) *23.2 24.5 -2 m 31.9 *33.0 23.8 -4 m -6 m *27.4 *27.4 *33.0 *33.0 31.9 *32.5 23.6 *29.7 *29.7 *37.2 *37.2 *30.8 *30.8 24.0 -8 m *34.6 *34.6 *34.8 *34.8 *27.4 *27.4 *21.5 -10 m *26.8 *26.8 *20.9 *20.9 *15.1 -12 m

*18.2 *20.9 *23.2 *24.7 *25.5 *25.5 *24.3 *21.5 *15.1

*13.2 *15.0 *16.8 *18.4 19.0 18.4 18.3 18.6 *16.4

*13.2 *15.0 *16.8 *18.4 *19.7 *20.4 *20.4 *19.4 *16.4

*10.6 *11.7 *12.9 *14.2 *15.3 15.0 14.6 14.6 15.1

*10.6 *11.7 *12.9 *14.2 *15.3 *16.2 *16.7 *16.6 *15.1

*9.95 *10.2 *10.8 *11.6 *12.4 12.5 12.0 11.8 12.1

*9.95 *10.2 *10.8 *9.62 *9.62 *11.6 10.5 *10.9 *12.4 10.1 *11.3 *13.2 9.87 *11.2 *13.7 *13.9 *13.0

These specifications are subject to change without notice. Illustrations and photos show the standard models, and may or may not include optional equipment, accessories, and all standard equipment with some differences in color and features. Before use, read and understand the Operators Manual for proper operation.

Hitachi Construction Machinery Co., Ltd.

www.hitachi-c-m.com

KS-EN052R

09.06 (KA/KA,FT3)
Printed in Japan