P7000MIN HMP Digital

Specifications:
Hydraulic Machine Products
P7000MIN01L
Revised: July 1, 2013
TABLE OF CONTENTS
Hydraulic Machine Product Specifications
Table of Contents
PRODUCT................................................................................................................................................... Section/Page
®
Toplok Shrouds.......................................................................................................................................................HMP 3
Bucket Lip and Wing Shrouds.................................................................................................................................HMP 13
Corner Wear Shoes...................................................................................................................................................HMP 16
Multi-Purpose Lip System.......................................................................................................................................HMP 17
Loadmaster® Plate Lip System................................................................................................................................HMP 19
Nemisys Cast Lip System.........................................................................................................................................HMP 22
Load Haul Dump (LHD) Lip Systems.......................................................................................................................HMP 24
ESCO Wheel Loader Buckets..................................................................................................................................HMP 26
ESCO Mining Hydraulic Face Shovel Fronts.........................................................................................................HMP 27
ESCO Mining Hoe Buckets......................................................................................................................................HMP 28
ESCO Construction Excavator Buckets.................................................................................................................HMP 33
ESCO Construction Hydraulic Coupler Attachment Guide..................................................................................HMP 34
ESCO Construction Thumb and Hydraulic Kit Specifications.............................................................................HMP 39
2 – P7000MIN01L – Hydraulic Machine Products (July 1, 2013) www.escocorp.com

Toplok Shrouds
®
TABLE OF CONTENTS
Understanding ESCO Numbering System
Example:
TAC65X385-2LA
T = Designates Toplok design. A “T” is also included on the Toplok boss and Toplok pin pattern
numbers.
A= Designates the mating size of the Toplok Boss (TAB)and Toplok Pin (TAP) to be used in the
assembly.
C= Designates a Lip Shroud. “W” designates a Wing Shroud.
65 = Lip thickness the shroud fits in millimeters.
385 = Shroud width in millimeters.
-2 = Sequential number for a shroud design that may be for the same lip thickness and have the
same width, but has a different exterior profile. Different sequence number shrouds are not
necessarily interchangeable even though they are for the same lip thickness and have the
same width.
L = Designates left hand shroud. “R” designates right hand shroud. Both for spade lips only. When
no “L” or “R” designation is shown, it may be used on straight or spade lip sections.
A= Sequential letter for shroud revisions. For example a “B” version would supercede an “A”
version.
www.escocorp.com P7000MIN01L – Hydraulic Machine Products (July 1, 2013) – 3

Toplok Wing Shrouds
®
TABLE OF CONTENTS
Wing Shrouds
Toplok Wing Shrouds are a convenient system for protecting the THRUST BLOCK
wings of FEL, Excavator, or Hydraulic Face Shovel Buckets. Wing SHROUD PaTTeRn nO.
TAW115-1 PDD33312#1/EP4286
shrouds protect buckets from accelerated wear that reduces loading
TAW135-1 PDD33312#1/EP4286
capacity and leads to premature failure, and reduce spillage that can TAW120X760-1 PDD33024#1
cause severe tire damage. TAW40X440-1A PDD33095#1
TAW40X560-1 PDD33096#1
Wing Shroud Selection TAW40X600-1 PDE51413#3
Toplok wing shrouds install easily on ESCO, OEM or aftermarket TAW50X505-2 PDD32816#1
buckets. To select the correct shroud, first determine the Bucket TAW50X630-1A PDE51413#3
Wing Thickness (dimension A) and the Shroud Width (dimension TAW50X800-1A EP3489#1
D) for the desired wing coverage. Toplok shrouds are designed TAW65X800-1B EP3489#1
to be installed just above the corner adapter (as shown below). A TBW50X655-1 PDD33097#1
second shroud may be installed just above the first for increased TBW75X545-1A PDE51987#2L/R
TBW75X655-1 PDE51987#2L/R
coverage
TBW80X800-1A EP3492#1
Note: It may be necessary to modify the leading edge of the wing TBW90X855-1A PDD32678#1
TBW100X965-1 PDD32680#1
to match the shroud fit area (dimensions E & F), as shrouds should
TBW120X760-1A EP3495#1
contact the leading edge and not wedge on.
TBW140X800-1 PDD33366#1
Wing Shroud Installation TBW165-1L/R PDD33367#1
TAW65-1 PDD33808/EP4286
The first step to installing the wing shroud is to locate and install TAW75-1 PDD33808/EP4286
the shroud boss. It is recommended that bosses be installed on TAW90-1 PDD33808/EP4286
the outside of the bucket to allow the bucket to dump clean. A
shim may be used to obtain the desired wing thickness (dimension
A). ESCO strongly recommends the use of thrust blocks (see
illustration) when installing Toplok wing shrouds to help absorb
the multi-directional forces encountered in the digging cycle. For
complete installation and maintenance instructions, refer to ESCO
maintenance literature piece P6014MIN.
Thrust blocks

Toplok Wing Shrouds
®
TABLE OF CONTENTS
Upper Wing Shroud Lower Wing Shroud
Upper Toplok
Upper Toplok Wing
Wing Shrouds
Shrouds
a B C D E F g
Wing WiDTH eXTenSiOn HeigHT BLUnT RaMP LengTH MaTing MaTing
MaCHine THiCKneSS angLe BOSS Pin WeigHT
PaRT iD TYPe mm/in mm/in mm/in mm/in mm/in deg mm/in iD iD kg/lb
TAW40X440-1A BACKHOE/FEL/HFS 40/ 1.50 92 / 3.62 76 / 3.00 437 / 17.19 38 / 1.50 0 300 / 11.80 TAB TAP 23 / 51
Upper Toplok Wing Shrouds
TAW40X560-1* CAT PROFILE 40 / 1.61 106 / 4.17 210 / 8.26 561 / 22.08 40 / 1.57 0 358 / 14.10 TAB TAP 47 / 105
TAW40X600-1 BACKHOE/FEL/HFS 40 /a1.50 104 B / 4.09 76 /C3.00 600 /D23.62 41 /E1.61 F0 327 /g12.88 TAB TAP 29 / 64
TAW50X505-1A BACKHOE/FEL/HFS 50 / 2.00
Wing 133 / 5.22 eXTenSiOn
WiDTH 133 / 5.24 507 / 19.97
HeigHT 19 / 0.75 RaMP
BLUnT 15 417 / 16.40
LengTH TAB
MaTing TAP
MaTing 27 / 60
TAW50X505-2 BACKHOE/FEL/HFS
MaCHine 50 / 2.00
THiCKneSS 120 / 4.74 110 / 4.33 507 / 19.97 52 / 2.05 angLe 0 394 / 15.51 TAB
BOSS TAP
Pin 44 / 96
WeigHT
TAW50X630-1A*
PaRT iD 1500MMTYPe
RADIUS mm/in
50 / 2.00 106mm/in
/ 4.18 mm/in
143 / 5.63 628 mm/in
/ 24.73 mm/in
51 / 2.00 deg
0 mm/in
315 / 12.39 iD
TAB iD
TAP kg/lb
44 / 98
TBW50X655-1** 1500MM RADIUS
TAW40X440-1A BACKHOE/FEL/HFS 50
40// 1.50
2.00 135
92 //3.62
5.31 244
76 //3.00
9.60 655
437 / 25.78
17.19 52
38 / 2.05
1.50 0 492
300 / 19.36
11.80 TBB
TAB TBP
TAP 78
23//172
51
TAW50X800-1A
TAW40X560-1* BACKHOE/FEL/HFS
CAT PROFILE 50/2.00
40 / 1.61 140/5.50
106 / 4.17 99/3.88
210 800/31.50
/ 8.26 561 / 22.08 52/2.05
40 / 1.57 0 332/13.05
358 / 14.10 TAB TAP 71/156
47 / 105
TAW65X800-1B
TAW40X600-1 BACKHOE/FEL/HFS 65/2.50
40 / 1.50 155/6.09
104 / 4.09 99/3.88
76 / 3.00 800/31.50
600 / 23.62 67/2.64
41 / 1.61 0 332/13.05
327 / 12.88 TAB TAP 74/164
29 / 64
TBW75X545-1A BACKHOE/HFS
TAW50X505-1A BACKHOE/FEL/HFS 75
50 / 3.00
2.00 161
133 / 6.32
5.22 83 //3.25
133 5.24 546
507 / 21.50
19.97 43
19 / 1.69
0.75 15 348
417 / 13.71
16.40 TBB
TAB TBP
TAP 43
27 / 95
60
TBW75X655-1
TAW50X505-2 1500MM RADIUS
BACKHOE/FEL/HFS 75
50 / 3.00
2.00 160
120 / 6.29
4.74 244
110 / 9.60
4.33 655
507 / 25.80
19.97 77
52 / 3.03
2.05 0 499
394 / 19.63
15.51 TBB
TAB TBP
TAP 88
44//194
96
TBW80X800-1A BACKHOE/FEL/HFS
TAW50X630-1A* 1500MM RADIUS 80/3.15
50 / 2.00 179/7.05
106 / 4.18 107/4.23
143 800/31.49
/ 5.63 628 / 24.73 83/3.27
51 / 2.00 0 433/17.06
315 / 12.39 TBB
TAB TBP
TAP 108/240
44 / 98
TBW90X495-1
TBW50X655-1** T-4 LIP
1500MM RADIUS 50N/A
/ 2.00 174 / 5.31
135 6.84 112 / 9.60
244 4.40 655
508 / 25.78
20.00 51 / 2.05
52 2.00 22.5
0 396 / 19.36
492 15.61 TBB TBP 61 / 172
78 134
TBW90X855-1A BACKHOE/FEL/HFS
TAW50X800-1A 90 / 3.50
50/2.00 207 / 8.15 345
140/5.50 / 13.58 855
99/3.88 / 33.65
800/31.50 92 / 3.62
52/2.05 0 572 / 22.52
332/13.05 TBB
TAB TBP
TAP 205 / 452
71/156
TBW100X965-1 BACKHOE/FEL/HFS
TAW65X800-1B CAT PROFILE 100 / 4.00
65/2.50 210 / 8.25
155/6.09 216 / 8.50 965
99/3.88 / 38.00
800/31.50 103 / 4.07
67/2.64 0 500 / 19.69
332/13.05 TBB
TAB TBP
TAP 159 / 351
74/164
TAW120X760-1
TBW75X545-1A BACKHOE/HFS 120
75 //3.00
4.75 225 / 6.32
161 8.86 178
83 //3.25
7.01 546
762 / 21.50
30.00 120
43 //1.69
4.72 0
15 432 / 13.71
348 17.01 TAB
TBB TAP
TBP 147 325
43 / 95
TBW120X760-1A
1500MM RADIUS 120/4.50
75 / 3.00 263/10.35
160 / 6.29 190/7.47
244 760/29.92
/ 9.60 655 / 25.80 122/4.78
77 / 3.03 0 950/37.39
499 / 19.63 TBB TBP 184/406
88 / 194
TBW80X800-1A BACKHOE/HFS 140 / 5.50 803
80/3.15 / 31.60 178
179/7.05 / 7.00 260
107/4.23 / 10.25
800/31.49 140 / 5.5
83/3.27 0 555 / 21.85
433/17.06 TBB TBP 211 / 466
108/240
TBW90X495-1 T-4 LIP N/A 174 / 6.84 112 / 4.40 508 / 20.00 51 / 2.00 22.5 396 / 15.61 TBB TBP 61 / 134
* TBW90X855-1A
Designed to fitBACKHOE/FEL/HFS
profile of CAT bucket.
®
90 / 3.50 207 / 8.15 345 / 13.58 855 / 33.65 92 / 3.62 0 572 / 22.52 TBB TBP 205 / 452
Lower Toplok Wing Shrouds
**TBW100X965-1
Leading Edge ofCAT bucket wing radius
PROFILE 100 /1500
4.00 mm/59.0
210 / 8.25 in. 216 / 8.50 965 / 38.00 103 / 4.07 0 500 / 19.69 TBB TBP 159 / 351
a
Note: Wing shrouds
TAW120X760-1 are designed to
BACKHOE/HFS 120directly onB/ 8.86
/ 4.75 fit225 178 C
cast Loadmaster
/ 7.01 ®762 /D30.00
wings or 120 E
can /be F
4.72installed
0 on /g17.01
432bucket side
TABplates. Installation
TAP 147 / 325
TBW120X760-1A BACKHOE/FEL/HFS Wing
120/4.50 WiDTH
263/10.35 eXTenSiOn
190/7.47 HeigHT
760/29.92 BLUnT RaMP
122/4.78 0 LengTH
950/37.39 MaTing
TBB MaTing
TBP 184/406
on side plates may require
MaCHine initial chamfering
THiCKneSS (see A, E, F dimensions).
TBW140X800-1 BACKHOE/HFS 140 / 5.50 803 / 31.60 178 / 7.00 260 / 10.25 140 / 5.5 angLe 0 555 / 21.85 BOSS
TBB Pin
TBP WeigHT
211 / 466
PaRT iD TYPe mm/in mm/in mm/in mm/in mm/in deg mm/in iD iD kg/lb
TAW50-1 LOWER WING HFS 50 / 2.00 187 / 7.12 138 / 5.42 307 / 12.08 51 / 2.02 0 438 / 17.25 TAB TAP 60 / 133
Lower
Lower Toplok
Toplok
TAW65-1
Wing
Wing Shrouds
Shrouds
LOWER WING HFS 65 / 2.50 214 / 8.44 138 / 5.42 314 / 12.36 67 / 2.62 0 438 / 17.25 TAB TAP 67 / 147
TAW75-1 LOWER WING HFS 75 /a3.00 254 /B10.00 160C/ 6.3 324 /D12.75 76 /E2.99 F0 470 /g18.50 TAB TAP 71 / 157
TAW90-1 LOWER WING HFS 90 / 3.50
Wing 254 / 10.00 eXTenSiOn
WiDTH 160 / 6.3 330 / 12.99
HeigHT 91 / 3.58 RaMP
BLUnT 0 470 / 18.50
LengTH TAB
MaTing TAP
MaTing 70 / 154
TAW115-1 LOWER WING HFS THiCKneSS
MaCHine 115 / 4.53 279 / 11.00 169 / 6.64 359 / 14.12 114 / 4.50 angLe 0 381 / 15.00 TAB
BOSS TAP
Pin 80 / 177
WeigHT
TAW135-2
PaRT iD LOWER TYPe
WING HFS mm/in
135 / 5.32 352 mm/in
/ 13.86 170 mm/in
/ 6.69 339 mm/in
/ 13.36 135 / 5.32 deg
mm/in 0 mm/in
483 / 19.02 iD
TAB iD
TAP 112kg/lb
/ 246
TBW165-1R
TAW50-1 LOWER WING HFS 160
50 //2.00
6.30 368
187//14.50
7.12 152//5.42
138 6.0 514
307 / 20.25
12.08 160
51 / /2.02
6.3 0 505
438 / 19.87
17.25 TBB
TAB TBP
TAP 173
60 //133
381
TBW165-1L
TAW65-1 LOWER WING HFS 160
65 //2.50
6.30 368
214//14.50
8.44 152//5.42
138 6.0 514
314 / 20.25
12.36 160
67 / /2.62
6.3 0 505
438 / 19.87
17.25 TBB
TAB TBP
TAP 173
67 //147
381
TBW165-1R LOWER WING HFS 160 / 6.30 368 / 14.50 152 / 6.0 514 / 20.25 160 / 6.3 0 505 / 19.87 TBB TBP 173 / 381
TBW165-1L LOWER WING HFS 160 / 6.30 368 / 14.50 152 / 6.0 514 / 20.25 160 / 6.3 0 505 / 19.87 TBB TBP 173 / 381
Notes: Lower Toplok wing shrouds are designed to directly fit on cast corner adapter wings. For Toplok shroud pin, Toplok
shroud boss, and Removal tool, see next page.

Toplok Shrouds for Spade Lips
®
TABLE OF CONTENTS
Note: Chamfer on
Type B shrouds for use on
straight or spade lips.
Type A
Type B
Lip Shrouds for Spade Lips

Toplok lip shrouds are available for spade and When selecting lips shrouds, compare the Lip
straight lips. Type A shrouds are only for spade lips Thickness (dimension A), Shroud Width (dimension
and must match the actual spade angle of the lip. D), Lip Leading Edge Blunt (dimension E), and the
Type B shrouds can be used on spade or straight Ramp Angle (dimension F). The critical dimension
lips, including the center position of semi-spade or is the Blunt Height. This dimension cannot be
duckbill spade lips. Type B shrouds are noted in the exceeded on the actual lip and must allow full
product specifications catalog with a 0 degree spade contact between the lip and the shroud bearing
angle. Type A shrouds provide a slightly better pads – wedging the shroud on the bevel is not
coverage lip coverage on spade lips between the recommended.
shroud and adapter than Type B shrouds.
IMPORTANT: Left and right hand shrouds are labeled based on the machine operator’s view of the
bucket while sitting in the machine. The exception is Hydraulic Face Shovels where left and right is
determined by facing into the bucket.
MaTing BOSS WeigHT MaTing WeigHT

PaRT iD iD kg/lb PaRT iD BOSS iD kg/lb
TAP-T TAB 1.1 / 2.4 HPA-ASSY-2 TAB .9/2.0
TAP TAB 1.0Pin
/ 2.2 HPB-ASSY-1 Hinge
TBB pin 2.7/4.9
TBP-T TBB 2.6 / 5.7 HPC-ASSY-2 TCB 4.3/9.4
TBP TBB 2.3 / 5.0
TCP-T Shroud
Toplok TCBPins 5.3 / 11.6 Hinge Pins for Hammerless Applications
TCP TCB 4.8 / 10.6
aTing BOSS MaTing
WeigHT
MaTing BOSS
BOSS WeigHT
WeigHT MaTing WeigHTMaTing
MaTing WeigHT
WeigHT
TDP TDB .6 / 1.2
PaRT
iD TEP iD kg/lb iD
iD kg/lb PaRT
PaRT iD kg/lbBOSS iD
iD BOSS kg/lb
PaRT iD TEBA .6 / 1.3kg/lb PaRT iD BOSS iD iD kg/lb
TAP-T 1.1 / 2.4
TAB TAP-T TAB
TAB 1.1 //
1.1 2.4
2.4 HPA-ASSY-2 HPA-ASSY-2
TAB TAB
HPA-ASSY-2.9/2.0 TAB .9/2.0
.9/2.0
TAB TAP
TAP 1.0 / 2.2 TAB
TAB 1.0
1.0 // 2.2
2.2 HPB-ASSY-1 HPB-ASSY-1
HPB-ASSY-12.7/4.9 TBB
TBB TBB 2.7/4.9
2.7/4.9
TBP-T
TBB TBP-T 2.6 / 5.7 TBB
TBB 2.6 //
2.6 5.7
5.7 HPC-ASSY-2 HPC-ASSY-2
HPC-ASSY-24.3/9.4 TCB
TCB TCB 4.3/9.4
4.3/9.4
WeigHT
TBB TBP 2.3 / 5.0 TBB 2.3 // 5.0
PaRT TBP
iD kg/lb TBB 2.3 5.0
TCB TCP-T
TCP-T5.3 .3 TCB
/ / 11.6
TCB 5.3 //
5.3 11.6
11.6
4097081 .7
TCB TCP 4.8 / 10.6
TCP TCB
TCB 4.8 //
4.8 10.6
10.6 Boss
TDP .6 / 1.2 TDB .6 // 1.2 Toplok Shroud Bosses
TDB TDP TDB .6 1.2
TEBA TEP
TEP .6 / 1.3 TEBA
TEBA .6 //
.6 1.3
1.3 MaTing MiniMUM LiP MaXiMUM LiP
TOPLOK Pin MaTing THiCKneSS THiCKneSS WeigHT
PaRT iD iD Hinge Pin iD mm/in mm/in kg/lb
Tool TAB TAP HPA-ASSY-2 51 / 2.00 76 / 3.00 .8 / 1.7

TBB TBP HPB-ASSY-1 89 / 3.50 159 / 6.25 1.9 / 4.2
WeigHT WeigHT
WeigHT TCB-1 TCP HPC-ASSY-2 165 / 6.50 203 / 8.00 1.9 / 4.2
kg/lb PaRT kg/lb
PaRT iD
iD kg/lb TCB TCP HPC-ASSY-2 165 / 6.50 203 / 8.00 3.9 / 8.5
.3 / 4097081
.7
4097081 .3
.3 // .7
.7 TDB TDP NONE 32 / 1.25 38 / 1.50 .4 / .8
MaTing MaTing
MaTing
MiniMUM LiP MiniMUM
MaXiMUM LiP LiP
MiniMUM LiP MaXiMUM
MaXiMUM LiP
LiP
Toplok Shrouds for Wheel Loaders
®
TABLE OF CONTENTS
Left & Right-hand Shroud Center Shroud

Spade Angle
B B
F E A
F E A D
D C
C
Wheel Loader Lip Shrouds

a B C D E F
LiP WiDTH eXTenSiOn UnDeRCUT BLUnT RaMP SPaDe MaTing MaTing
MaCHine THiCKneSS angLe angLe BOSS Pin WeigHT
PaRT iD TYPe mm/in mm/in mm/in mm/in mm/in deg deg iD iD kg/lb
TDC40X380-1 FEL 40 / 1.57 380 / 14.96 90 / 3.54 35 / 1.38 17 / 0.67 30 0 TDB TDP 30 / 66
TEC50X330-2LB FEL 50 / 2.00 465 / 18.31 159 / 6.25 38 / 1.50 23 / .89 25 10 TEBA TEP 51 / 112
TEC50X330-2RB FEL 50 / 2.00 330 / 12.99 159 / 6.25 38 / 1.50 23 / .89 25 10 TEBA TEP 51 / 112
TEC50X420-5B FEL 50 / 2.00 420 / 16.54 159 / 6.25 38 / 1.50 23 / .89 25 0 TEBA TEP 62 / 137
TAC50X285-1A FEL 51 / 2.00 285 / 11.22 150 / 5.91 72 / 2.83 17 / 0.67 30 0 TAB TAP 57 / 126
TAC50X345-1B FEL 51 / 2.00 345 / 13.58 105 / 4.13 55 / 2.17 17 / 0.67 30 0 TAB TAP 42 / 92
TAC50X345-1C FEL 51 / 2.00 345 / 13.58 150 / 5.91 72 / 2.83 17 / 0.67 30 0 TAB TAP 63 / 140
TAC50X345-2LB FEL 51 / 2.00 345 / 13.58 105 / 4.13 55 / 2.17 17 / 0.67 30 10 TAB TAP 41 / 91
TAC50X345-2LC FEL 51 / 2.00 345 / 13.58 150 / 5.91 72 / 2.83 17 / 0.67 30 13 TAB TAP 63 / 140
TAC50X345-2RB FEL 51 / 2.00 345 / 13.58 105 / 4.13 55 / 2.17 17 / 0.67 30 10 TAB TAP 41 / 91
TAC50X345-2RC FEL 51 / 2.00 345 / 13.58 150 / 5.91 72 / 2.83 17 / 0.67 30 13 TAB TAP 64 / 141
TAC50X345-3* FEL 51 / 2.00 345 / 13.58 150 / 5.91 72 / 2.83 17 / 0.67 30 0 TAB TAP 65 / 143
TAC50X345-4L* FEL 51 / 2.00 346 / 13.58 150 / 5.91 72 / 2.83 17 / 0.67 30 13 TAB TAP 66 / 145
TAC50X345-4R* FEL 51 / 2.00 347 / 13.58 150 / 5.91 72 / 2.83 17 / 0.67 30 13 TAB TAP 66 / 145
TAC50X345-5L* FEL 51 / 2.00 348 / 13.58 150 / 5.91 72 / 2.83 17 / 0.67 30 13 TAB TAP 64 / 142
TAC50X345-5R* FEL 51 / 2.00 349 / 13.58 150 / 5.91 72 / 2.83 17 / 0.67 30 13 TAB TAP 64 / 142
TAC50X345-6* FEL 51 / 2.00 350 / 13.58 150 / 5.91 72 / 2.83 17 / 0.67 30 0 TAB TAP 64 / 142
TAC50X345-7L* FEL 51 / 2.00 351 / 13.58 150 / 5.91 72 / 2.83 17 / 0.67 30 13 TAB TAP 66 / 145
TAC50X345-7R* FEL 51 / 2.00 352 / 13.58 150 / 5.91 72 / 2.83 17 / 0.67 30 13 TAB TAP 66 / 145
TAC50X345-8L* FEL 51 / 2.00 353 / 13.58 150 / 5.91 72 / 2.83 17 / 0.67 30 13 TAB TAP 64 / 141
TAC50X345-8R* FEL 51 / 2.00 354 / 13.58 150 / 5.91 72 / 2.83 17 / 0.67 30 13 TAB TAP 64 / 141
TAC50X470-1A FEL 51 / 2.00 470 / 18.50 105 / 4.13 55 / 2.17 17 / 0.67 30 0 TAB TAP 53 / 117
TAC60X350-1 FEL 60 / 2.36 350 / 13.78 120 / 4.72 41 / 1.63 12 / 0.47 25 0 TAB TAP 49 / 107
TAC60X350-2L FEL 60 / 2.36 350 / 13.78 120 / 4.72 41 / 1.63 12 / 0.47 25 14 TAB TAP 51 / 111
TAC60X350-2R FEL 60 / 2.36 350 / 13.78 120 / 4.72 41 / 1.63 12 / 0.47 25 14 TAB TAP 48 / 105
TAC65X340-1 FEL 64 / 2.50 341 / 13.44 140 / 5.50 72 / 2.82 22 / 0.87 25 0 TAB TAP 61 / 135
TAC65X340-2L FEL 64 / 2.50 341 / 13.44 140 / 5.50 72 / 2.82 22 / 0.87 25 10 TAB TAP 62 / 136
TAC65X340-2R FEL 64 / 2.50 341 / 13.44 140 / 5.50 72 / 2.82 22 / 0.87 25 10 TAB TAP 62 / 136
TAC65X350-1A FEL 64 / 2.50 350 / 13.78 127 / 5.00 49 / 1.92 18 / 0.71 30 0 TAB TAP 50 / 111
TAC65X380-1A FEL 64 / 2.50 380 / 14.96 76 / 3.00 44 / 1.74 22 / 0.87 25 0 TAB TAP 36 / 80
TAC65X380-2LA FEL 64 / 2.50 380 / 14.96 76 / 3.00 44 / 1.74 22 / 0.87 25 20 TAB TAP 40 / 88
TAC65X380-2RA FEL 64 / 2.50 380 / 14.96 76 / 3.00 44 / 1.74 22 / 0.87 25 20 TAB TAP 40 / 88
TAC65X385-1A FEL 64 / 2.50 387 / 15.25 140 / 5.50 72 / 2.82 22 / 0.87 25 0 TAB TAP 67 / 149
*Quarry style shrouds with lower wings. Continued on the next page.
Blunt of lip plate is 2/.08 smaller than dimension “E”.
Note: Center shrouds are designated with “0” degree spade angle. All other spade angles are left and right hand shrouds.

® TABLE OF CONTENTS

Spade Angle
B B
F E A
F E A D
D C
C

a B C D E F
TAC65X410-1 FEL 64LiP
/ 2.50 WiDTH
411 / 16.20 eXTenSiOn
165 / 6.50 UnDeRCUT
66 / 2.58 BLUnT
20 / 0.78 RaMP
25 SPaDe
0 MaTing
TAB MaTing
TAP 76 / 168
TAC65X410-2L MaCHine
FEL THiCKneSS
64 / 2.50 411 / 16.20 165 / 6.50 66 / 2.58 20 / 0.78 angLe
25 angLe
14 BOSS
TAB Pin
TAP WeigHT
76 / 168
PaRT iD
TAC65X410-2R TYPe
FEL mm/in
64 / 2.50 mm/in
411 / 16.20 mm/in
165 / 6.50 mm/in
66 / 2.58 mm/in
20 / 0.78 deg
25 deg
14 iD
TAB iD
TAP kg/lb
76 / 168
TDC40X380-1
TAC70X320-6A FEL 40
70 / 1.57
2.75 380
320 / 14.96
12.60 90 //3.54
115 4.53 35
44 / 1.38
1.73 17
18 / 0.67
0.71 30 0 TDB
TAB TDP
HPA-ASSY-2 30//104
47 66
TEC50X330-2LB
TAC70X320-7LA FEL 50
70 / 2.00
2.75 465
320 / 18.31
12.60 159
115 / 6.25
4.53 38
44 / 1.50
1.73 23//0.71
18 .89 25
30 10 TEBA
TAB TEP
HPA-ASSY-2 51
48 / 112
105
TEC50X330-2RB
TAC70X320-7RA FEL 50
70 / 2.00
2.75 330
320 / 12.99
12.60 159
115 / 6.25
4.53 38
44 / 1.50
1.73 23//0.71
18 .89 25
30 10 TEBA
TAB TEP
HPA-ASSY-2 51
48 / 112
105
TEC50X420-5B
TAC70X400-6 FEL 50
70 / 2.00
2.75 420
400 / 16.54
15.75 159
115 / 6.25
4.53 38 // 1.73
44 1.50 23//0.71
18 .89 25
30 0 TEBA
TAB TEP
HPA-ASSY-2 62
57 / 137
125
TAC50X285-1A
TAC70X400-7L FEL 51
70 / 2.00
2.75 285
400 / 11.22
15.75 150
115 / 5.91
4.53 72 // 1.73
44 2.83 17
18 / 0.67
0.71 30 0
10 TAB TAP
HPA-ASSY-2 57 / 126
125
TAC50X345-1B
TAC70X400-7R FEL 51
70 / 2.00
2.75 345
400 / 13.58
15.75 105
115 / 4.13
4.53 55 // 1.73
44 2.17 17
18 / 0.67
0.71 30 0
10 TAB TAP
HPA-ASSY-2 42//125
57 92
TAC50X345-1C
TAC70X415-1* FEL 51
70 / 2.00
2.75 345
606 / 13.58
23.84 150
151 / 5.91
5.93 72
74 / 2.83
2.90 17
18 / 0.67
0.71 30 0 TAB TAP 63
92 / 140
202
TAC50X345-2LB
TAC70X415-2L* FEL 51
70 / 2.00
2.75 345
606 / 13.58
23.84 105
151 / 4.13
5.93 55
74 / 2.17
2.90 17
18 / 0.67
0.71 30 10
13 TAB TAP 41//217
98 91
TAC50X345-2LC
TAC70X415-2R* FEL 51
70 / 2.00
2.75 345
606 / 13.58
23.84 150
151 / 5.91
5.93 72
74 / 2.83
2.90 17
18 / 0.67
0.71 30 13 TAB TAP 63
98 / 140
217
TAC50X345-2RB
70 / 2.00
2.75 345
510 / 13.58
20.09 105
151 / 4.13
5.93 55
74 / 2.17
2.90 17
18 / 0.67
0.71 30 10
13 TAB TAP 41//215
98 91
TAC50X345-2RC
70 / 2.00
2.75 345
510 //20.09
13.58 150
151 / 5.91
5.93 72
74 / 2.83
2.90 17
18 / 0.67
0.71 30 13 TAB TAP 64
98 / 141
215
TAC50X345-3*
TAC70X450-1A FEL 51
70 / 2.00
2.75 345
450 / 13.58
17.72 150
151 / 5.91
5.93 72
73 / 2.83
2.89 17
18 / 0.67
0.71 30 0 TAB TAP 65
93 / 143
205
TAC50X345-4L*
TAC70X450-2LA FEL 51
70 / 2.00
2.75 346
450 / 13.58
17.72 150
151 / 5.91
5.93 72
73 / 2.83
2.89 17
18 / 0.67
0.71 30 13
10 TAB TAP 66
95 / 145
209
TAC50X345-4R*
TAC70X450-2RA FEL 51
70 / 2.00
2.75 347
450 / 13.58
17.72 150
151 / 5.91
5.93 72
73 / 2.83
2.89 17
18 / 0.67
0.71 30 13
10 TAB TAP 66
95 / 145
209
TAC50X345-5L*
TAC70X450-3* FEL 51
70 / 2.00
2.75 348
635 / 13.58
24.99 150
151 / 5.91
5.93 72
73 / 2.83
2.89 17
18 / 0.67
0.71 30 13
0 TAB TAP 64
97 / 142
214
TAC50X345-5R*
70 / 2.00
2.75 349
661 / 13.58
26.04 150
151 / 5.91
5.93 72
73 / 2.83
2.89 17
18 / 0.67
0.71 30 13
10 TAB TAP 64 //142
100 220
TAC50X345-6*
70 / 2.00
2.75 350
661 / 13.58
26.04 150
151 / 5.91
5.93 72
73 / 2.83
2.89 17
18 / 0.67
0.71 30 0
10 TAB TAP 64 //142
100 220
TAC50X345-7L*
70 / 2.00
2.75 351
556 / 13.58
21.88 150
151 / 5.91
5.93 72
73 / 2.83
2.89 17
18 / 0.67
0.71 30 13 TAB TAP 66
97 / 145
214
TAC50X345-7R*
70 / 2.00
2.75 352
556 / 13.58
21.88 150
151 / 5.91
5.93 72
73 / 2.83
2.89 17
18 / 0.67
0.71 30 13 TAB TAP 66
97 / 145
214
TAC50X345-8L*
TAC75X430-1* FEL 51
76 / 2.00
3.00 353
430 / 13.58
16.93 150
165 / 5.91
6.51 72
93 / 2.83
3.66 17
19 / 0.67
0.73 30 13
0 TAB TAP 64 //141
138 304
TAC50X345-8R*
76 / 2.00
3.00 354
431 / 13.58
16.93 150
165 / 5.91
6.51 72
93 / 2.83
3.66 17
19 / 0.67
0.73 30 13 TAB TAP 64 //141
141 312
TAC50X470-1A
76 / 2.00
3.00 470
432 / 18.50
16.93 105
165 / 4.13
6.51 55
93 / 2.17
3.66 17
19 / 0.67
0.73 30 0
13 TAB TAP 53 //117
141 312
TAC60X350-1
76 / 2.36
3.00 350
433 / 13.78
16.93 120
165 / 4.72
6.51 41
93 / 1.63
3.66 12
19 / 0.47
0.73 25
30 0
13 TAB TAP 49 //107
138 305
TAC60X350-2L
76 / 2.36
3.00 350
434 / 13.78
16.93 120
165 / 4.72
6.51 41
93 / 1.63
3.66 12
19 / 0.47
0.73 25
30 14
13 TAB TAP 51 //111
138 305
TAC60X350-2R
TBC90X435-1C FEL 60
89 / 2.36
3.50 350
435 / 13.78
17.13 120
188 / 4.72
7.40 41
89 / 1.63
3.49 12
18 / 0.47
0.71 25
30 14
0 TAB
TBB TAP
TBP 48 //105
144 317
TAC65X340-1
TBC90X435-2LC FEL 64
89 / 2.50
3.50 341
435 / 13.44
17.13 140
188 / 5.50
7.40 72
89 / 2.82
3.49 22
18 / 0.87
0.71 25
30 0
10 TAB
TBB TAP
TBP 61 //135
146 321
TAC65X340-2L
TBC90X435-2RC FEL 64
89 / 2.50
3.50 341
435 / 13.44
17.13 140
188 / 5.50
7.40 72
89 / 2.82
3.49 22
18 / 0.87
0.71 25
30 10 TAB
TBB TAP
TBP 62 //136
146 321
TAC65X340-2R
TBC100X230-1 FEL 64 //2.50
101 4.00 341 / 13.44
230/9.07 140
142 / 5.50
5.62 72
66 / 2.82
2.62 22
17 / 0.87
0.71 25
30 10
0 TAB
TBB TAP
TBP 62
68// 151
136
TAC65X350-1A
TBC100X290-3A FEL 64 //2.50
100 4.00 350
290 / 13.78
11.42 127
150 / 5.00
5.92 49
63 / 1.92
2.48 18
25 / 0.71
0.98 30 0 TAB
TBB TAP
HPB-ASSY-1 50
87 / 111
192
TAC65X380-1A
TBC100X290-4LA FEL 64 //2.50
100 4.00 380
290 / 14.96
11.42 76 //3.00
150 5.92 44
63 / 1.74
2.48 22
25 / 0.87
0.98 25
30 0
22 TAB
TBB TAP
HPB-ASSY-1 36 /191
87 / 80
TAC65X380-2LA
TBC100X290-4RA FEL 64 //2.50
100 4.00 380
290 / 14.96
11.42 76 //3.00
150 5.92 44
63 / 1.74
2.48 22
25 / 0.87
0.98 25
30 20
22 TAB
TBB TAP
HPB-ASSY-1 40 /191
87 / 88
TAC65X380-2RA
TBC100X320-2LB FEL 64 //2.50
100 4.00 380
320 / 14.96
12.60 76 //3.00
145 5.70 44
45 / 1.74
1.77 22
25 / 0.87
0.98 25
30 20
10 TAB
TBB TAP
HPB-ASSY-1 40//209
95 88
TAC65X385-1A
TBC100X320-2RB FEL 64 //2.50
100 4.00 387
320 / 15.25
12.60 140
145 / 5.50
5.70 72
45 / 2.82
1.77 22
25 / 0.87
0.98 25
30 0
10 TAB
TBB TAP
HPB-ASSY-1 67
95 / 149
209
TAC65X385-2LA
TBC100X390-1A FEL 64 //2.50
102 4.00 387
390 / 15.25
15.35 140
143 / 5.50
5.62 72
67 / 2.82
2.62 22
18 / 0.87
0.71 25
30 10
0 TAB
TBB TAP
TBP 68
93 / 150
206
TAC65X385-2RA
TBC100X410-1B FEL 64 //2.50
102 4.00 387
410 / 15.25
16.14 140
166 / 5.50
6.54 72
73 / 2.82
2.87 22
18 / 0.87
0.71 25
30 10
0 TAB
TBB TAP
TBP 68 //149
113 249
TBC100X410-2LB FEL 102 / 4.00 410 / 16.14 166 / 6.54 73 / 2.87 18 / 0.71 30 10 TBB TBP 118 / 260
TBC100X410-2RB FEL 102 / 4.00 410 / 16.14 166 / 6.54 73 / 2.87 18 / 0.71 30 10 TBB TBP 118 / 260
*Quarry style shrouds with lower wings. Continued on the next page.
Blunt of lip plate is 2/.08 smaller than dimension “E”.

®
TABLE OF CONTENTS

Spade Angle
B B
F E A
F E A D
D C
C

a B C D E F
LiP WiDTH eXTenSiOn UnDeRCUT BLUnT RaMP SPaDe MaTing MaTing
MaCHine THiCKneSS angLe angLe BOSS Pin WeigHT
PaRT iD TYPe mm/in mm/in mm/in mm/in mm/in deg deg iD iD kg/lb
TDC40X380-1
TBC100X410-5A FEL 40 //1.57
100 4.00 380
410 / 14.96
16.14 90 //3.54
250 9.84 35
98 / 1.38
3.86 17
34 / 0.67 30
1.34 22.5 0 TDB
TBB TDP
HPB-ASSY-1 30 / 414
188 66
TEC50X330-2LB
TBC100X410-6LA FEL 50 //2.00
100 4.00 465
410 / 18.31
16.14 159
250 / 6.25
9.84 38
98 / 1.50
3.86 23//1.34
34 .89 25
22.5 10
15 TEBA
TBB TEP
HPB-ASSY-1 51 //112
188 414
TEC50X330-2RB
TBC100X410-6RA FEL 50 //2.00
100 4.00 330 / 16.14
410 12.99 159 / 9.84
250 6.25 38 / 3.86
98 1.50 23//1.34
34 .89 25
22.5 10
15 TEBA
TBB TEP
HPB-ASSY-1 51 //112
188 414
TEC50X420-5B
TBC100X410-7 FEL 50 //2.00
100 4.00 420 / 16.14
410 16.54 159 / 7.45
189 6.25 38 / 3.43
87 1.50 23//0.87
22 .89 25
30 0 TEBA
TBB TEP
HPB-ASSY-1 62 //137
156 345
TAC50X285-1A
TBC100X410-8L FEL 51 //2.00
100 4.00 285 / 16.14
410 11.22 150 / 7.45
189 5.91 72 / 3.43
87 2.83 17 / 0.87
22 0.67 30 0
14 TAB
TBB TAP
HPB-ASSY-1 57 //126
160 352
TAC50X345-1B
TBC100X410-8R FEL 51 //2.00
100 4.00 345 / 16.14
410 13.58 105 / 7.45
189 4.13 55 / 3.43
87 2.17 17 / 0.87
22 0.67 30 0
14 TAB
TBB TAP
HPB-ASSY-1 42 / 352
160 92
TAC50X345-1C
TBC100X410-9A FEL 51 //2.00
100 4.00 345 / 16.14
410 13.58 150 / 6.54
166 5.91 72 / 2.87
73 2.83 17
18//0.67
.71 30 0 TAB
TBB TAP
TBP 63 //140
135 298
TAC50X345-2LB
TBC100X410-10LA FEL 51 / /4.00
100 2.00 345 / 16.14
410 13.58 105 / 6.54
166 4.13 55 / 2.87
73 2.17 17
18//0.67
.71 30 10 TAB
TBB TAP
TBP 41 / 298
135 91
TAC50X345-2LC
TBC100X410-10RA FEL 51 / /4.00
100 2.00 345 / 16.14
410 13.58 150 / 6.54
166 5.91 72 / 2.87
73 2.83 17
18//0.67
.71 30 13
10 TAB
TBB TAP
TBP 63 //140
135 298
TAC50X345-2RB
TBC100X425-2L FEL 51 //2.00
102 4.00 345 / 16.73
425 13.58 105 / 8.18
208 4.13 55 / 3.20
81 2.17 17 / 1.34
34 0.67 22.5
30 10
15 TAB
TBB TAP
TBP 41 / 493
224 91
TAC50X345-2RC
TBC100X425-2R FEL 51 //2.00
102 4.00 345 / 16.73
425 13.58 150 / 8.18
208 5.91 72 / 3.20
81 2.83 17 / 1.34
34 0.67 22.5
30 13
15 TAB
TBB TAP
TBP 64 //141
224 493
TAC50X345-3*
TBC100X445-3A FEL 51 //2.00
100 4.00 345 / 17.52
445 13.58 150 / 9.84
250 5.91 72 / 3.86
98 2.83 17 / 1.34
34 0.67 22.5
30 0 TAB
TBB TAP
HPB-ASSY-1 65 //143
183 403
TAC50X345-4L*
TBC100X445-4LA FEL 51 //2.00
100 4.00 346
445 / 13.58
17.52 150
250 / 5.91
9.84 72
98 / 2.83
3.86 17
34 / 0.67 30
1.34 22.5 13
15 TAB
TBB TAP
HPB-ASSY-1 66 //145
183 403
TAC50X345-4R*
TBC100X445-4RA FEL 51 //2.00
100 4.00 347
445 / 13.58
17.52 150
250 / 5.91
9.84 72
98 / 2.83
3.86 17
34 / 0.67 30
1.34 22.5 13
15 TAB
TBB TAP
HPB-ASSY-1 66 //145
183 403
TAC50X345-5L*
TBC100X470-3 FEL 51 //2.00
102 4.00 348 / 18.50
470 13.58 150 / 8.18
208 5.91 72 //2.83
107 4.22 17 / 1.34
34 0.67 22.5
30 13
0 TAB
TBB TAP
TBP 64 //142
239 527
TAC50X345-5R*
TBC100X470-4L FEL 51 //2.00
102 4.00 349 / 18.50
470 13.58 150 / 8.18
208 5.91 72 //2.83
107 4.22 17 / 1.34
34 0.67 22.5
30 13
21 TAB
TBB TAP
TBP 64 //142
250 551
TAC50X345-6*
TBC100X470-4R FEL 51 //2.00
102 4.00 350 / 18.50
470 13.58 150 / 8.18
208 5.91 72 //2.83
107 4.22 17 / 1.34
34 0.67 22.5
30 0
21 TAB
TBB TAP
TBP 64 //142
250 551
TAC50X345-7L*
TBC100X555-1 FEL 51 //2.00
102 4.00 351 / 21.85
555 13.58 150 / 8.18
208 5.91 72 / 3.20
81 2.83 17 / 1.34
34 0.67 22.5
30 13
0 TAB
TBB TAP
TBP 66 //145
279 616
TAC50X345-7R*
TBC100X660-1 FEL 51 //2.00
102 4.00 352 / 25.98
660 13.58 150 / 8.18
208 5.91 72 / 3.20
81 2.83 17 / 1.34
34 0.67 22.5
30 13
0 TAB
TBB TAP
TBP 66 //145
315 694
TAC50X345-8L*
TBC120X350-2LA FEL 51 //2.00
120 4.75 353 / 13.78
350 13.58 150 / 5.71
145 5.91 72 / 1.77
45 2.83 17 / 1.65
42 0.67 30 13
11.4 TAB
TBB TAP
HPB-ASSY-1 64 //141
110 243
TAC50X345-8R*
TBC120X350-2RA FEL 51 //2.00
120 4.75 354 / 13.78
350 13.58 150 / 5.71
145 5.91 72 / 1.77
45 2.83 17 / 1.65
42 0.67 30 13
11.4 TAB
TBB TAP
HPB-ASSY-1 64 //141
110 243
TAC50X470-1A
TBC120X350-3A FEL 51 //2.00
120 4.75 470 / 13.78
350 18.50 105 / 5.71
145 4.13 55 / 1.77
45 2.17 17 / 1.65
42 0.67 30 0 TAB
TBB TAP
HPB-ASSY-1 53 //117
109 240
TAC60X350-1
TBC120X445-1 FEL
FEL/HFS 60 //2.36
121 4.75 350 / 17.50
445 13.78 120 / 9.91
252 4.72 41 / 3.50
89 1.63 12 / 1.65
42 0.47 25
30 0 TAB
TBB TAP
TBP 49 //107
152 335
TAC60X350-2L
TBC120X445-2LA FEL
FEL/HFS 60 //2.36
121 4.75 350 / 17.50
445 13.78 120
242 / 4.72
9.52 41
89 / 1.63
3.50 12
42 / 0.47
1.65 25
30 14
13 TAB
TBB TAP
TBP 51 //111
159 350
TBC120X445-2RA
TAC60X350-2R FEL/HFS
FEL 121
60 //2.36
4.75 445 / 13.78
350 17.50 242 / 4.72
120 9.52 89 / 1.63
41 3.50 42 / 0.47
12 1.65 30
25 13
14 TBB
TAB TBP
TAP 159
48 //105
350
TAC65X340-1
* QUARRY FEL
STYLE SHROUDS 64 / 2.50
WITH LOWER 341 / 13.44
WINGS 140 / 5.50 72 / 2.82 22 / 0.87 25 0 TAB TAP 61 / 135
*Quarry style shrouds
TAC65X340-2L FELwith lower wings. 341 / 13.44
64 / 2.50 140 / 5.50 72 / 2.82 22 / 0.87 25 10 TAB TAP 62 / 136
Blunt of lip plate is 2/.08
TAC65X340-2R FEL smaller than dimension
64 / 2.50 341 / 13.44“E”. 140 / 5.50 72 / 2.82 22 / 0.87 25 10 TAB TAP 62 / 136
Note:
TAC65X350-1A
Center shrouds FEL 64 / 2.50 with
are designated 350“0”
/ 13.78
degree 127 / 5.00
spade 49 /other
angle. All 1.92 18 / 0.71
spade 30 are
angles 0 and TAB
left right handTAP
shrouds.50 / 111
TAC65X380-1A FEL 64 / 2.50 380 / 14.96 76 / 3.00 44 / 1.74 22 / 0.87 25 0 TAB TAP 36 / 80
TAC65X385-1A FEL 64 / 2.50 387 / 15.25 140 / 5.50 72 / 2.82 22 / 0.87 25 0 TAB TAP 67 / 149

Toplok Shrouds for Face Shovels and Hoes
®
TABLE OF CONTENTS

Spade Angle
B
B
F E A
D
F E A C
D
C
Face Shovel/Hoe Lip Shrouds
A B C D E F
LIP WIDTH EXTENSION UNDERCUT BLUNT RAMP SPADE MATING MATING
MACHINE THICKNESS ANGLE ANGLE BOSS PIN WEIGHT
PART ID TYPE mm/in mm/in mm/in mm/in mm/in deg deg ID ID kg/lb
TAC70X240-1B BACKHOE 70 / 2.75 240 / 9.45 115 / 4.53 35 / 1.38 18 / 0.71 30 0 TAB HPA-ASSY-2 33 / 72
TAC70X240-2L HFS 70 / 2.75 240 / 9.45 99 / 3.91 28 / 1.10 18 / 0.71 30 14 TAB HPA-ASSY-2 38 / 83
TAC70X240-2R HFS 70 / 2.75 240 / 9.45 99 / 3.91 28 / 1.10 18 / 0.71 30 14 TAB HPA-ASSY-2 38 / 83
TAC70X280-1A BACKHOE 70 / 2.75 280 / 11.02 122 / 4.80 52 / 2.06 16 / 0.63 30 0 TAB HPA-ASSY-2 44 / 97
TAC70X280-2LA BACKHOE 70 / 2.75 280 / 11.02 122 / 4.80 52 / 2.06 16 / 0.63 30 14 TAB HPA-ASSY-2 45 / 99
TAC70X280-2RA BACKHOE 70 / 2.75 280 / 11.02 122 / 4.80 52 / 2.06 16 / 0.63 30 14 TAB HPA-ASSY-2 45 / 99
TAC70X400-2B BACKHOE/HFS 70 / 2.75 400 / 15.75 125 / 4.90 35 / 1.38 18 / .71 30 0 TAB HPA-ASSY-2 61 / 135
TAC70X400-3LB BACKHOE/HFS 70 / 2.75 400 / 15.75 125 / 4.90 35 / 1.38 18 / .71 30 10 TAB HPA-ASSY-2 60 / 131
TAC70X400-3RB BACKHOE/HFS 70 / 2.75 400 / 15.75 125 / 4.90 35 / 1.38 18 / .71 30 10 TAB HPA-ASSY-2 60 / 131
TAC80X305-3 BACKHOE 80 / 3.15 305 / 12.01 130 / 5.12 57 / 2.25 22 / 0.87 30 0 TAB HPA-ASSY-2 54 / 119
TAC80X305-4L BACKHOE 80 / 3.15 305 / 12.01 130 / 5.12 57 / 2.25 22 / 0.87 30 14 TAB HPA-ASSY-2 54 / 119
TAC80X305-4R BACKHOE 80 / 3.15 305 / 12.01 130 / 5.12 57 / 2.25 22 / 0.87 30 14 TAB HPA-ASSY-2 54 / 119
TAC80X320-1A BACKHOE/HFS 80 / 3.15 320 / 12.6 95 / 3.75 30 / 1.18 22 / .87 30 0 TAB HPA-ASSY-2 44 / 98
TAC80X320-2LA BACKHOE/HFS 80 / 3.15 320 / 12.6 93 / 3.68 30 / 1.18 22 / .87 30 10 TAB HPA-ASSY-2 44 / 98
TAC80X320-2RA BACKHOE/HFS 80 / 3.15 320 / 12.6 93 / 3.68 30 / 1.18 22 / .87 30 10 TAB HPA-ASSY-2 44 / 98
TAC90X225-1 HFS 89 / 3.50 225 / 8.86 128 / 5.03 36 / 1.42 31 / 1.22 30 0 TAB HPA-ASSY-2 47 / 104
TAC90X225-2L HFS 89 / 3.50 225 / 8.86 128 / 5.03 36 / 1.42 31 / 1.22 30 17.5 TAB HPA-ASSY-2 49 / 108
TAC90X225-2R HFS 89 / 3.50 225 / 8.86 128 / 5.03 36 / 1.42 31 / 1.22 30 17.5 TAB HPA-ASSY-2 49 / 108
TAC90X245-1A HFS 89 / 3.50 245 / 9.65 105 / 4.13 35 / 1.38 24 / 0.94 30 0 TAB HPA-ASSY-2 37 / 81
TAC90X245-2LA HFS 89 / 3.50 245 / 9.65 105 / 4.13 35 / 1.38 24 / 0.94 30 22 TAB HPA-ASSY-2 37 / 81
TAC90X245-2RA HFS 89 / 3.50 245 / 9.65 105 / 4.13 35 / 1.38 24 / 0.94 30 22 TAB HPA-ASSY-2 37 / 81
TAC90X360-1 HFS 89 / 3.50 360 / 14.17 125 / 4.94 36 / 1.42 24 / 0.94 30 0 TAB HPA-ASSY-2 73 / 160
TBC100X290-3A HFS 102 / 4.00 290 / 11.42 150 / 5.92 64/ 2.50 25 /.98 30 0 TBB HPB-ASSY-1 86 / 192
TBC100X290-4LA HFS 102 / 4.00 290 / 11.42 150 / 5.92 64/ 2.50 25 /.98 30 22 TBB HPB-ASSY-1 87 / 191
TBC100X290-4RA HFS 102 / 4.00 290 / 11.42 150 / 5.92 64/ 2.50 25 /.98 30 22 TBB HPB-ASSY-1 87 / 191
TBC100X320-2LB HFS 102/ 4.00 320 / 12.60 145 / 5.70 45/ 1.77 25/.98 30 10 TBB HPB-ASSY-1 88 / 194
TBC100X320-2RB HFS 102 / 4.00 320 / 12.60 145 / 5.70 45/ 1.77 25/.98 30 10 TBB HPB-ASSY-1 88 / 194
Blunt of lip plate is 2/.08 smaller than dimension “E”. Continued on the next page.

®
TABLE OF CONTENTS

Spade Angle
B
B
F E A
D
F E A C
D
C
A B C D E F
TAC70X240-1B
TBC100X345-1L BACKHOE
HFS 70 //2.75
102 4.00 240//13.58
345 9.45 115 / 5.59
142 4.53 35 / 1.57
40 1.38 18 / 0.98
25 0.71 30 0
14 TAB
TBB HPA-ASSY-2
HPB-ASSY-1 33 / 234
106 72
TAC70X240-2L
TBC100X345-1R HFS 70 //2.75
102 4.00 240//13.58
345 9.45 99 //3.91
142 5.59 28 / 1.57
40 1.10 18 / 0.98
25 0.71 30 14 TAB
TBB HPA-ASSY-2
HPB-ASSY-1 38 / 234
106 83
TAC70X240-2R
TBC100X375-1L HFS 70 //2.75
102 4.00 240//14.76
375 9.45 99 //3.91
125 4.92 28 / 1.77
45 1.10 18 / 0.98
25 0.71 30 14
22 TAB
TBB HPA-ASSY-2
HPB-ASSY-1 38 / 224
102 83
TAC70X280-1A
TBC100X375-1R BACKHOE
HFS 70 //2.75
102 4.00 280 11.02
375 / 14.76 122 / 4.92
125 4.80 52 / 1.77
45 2.06 16 / 0.98
25 0.63 30 0
22 TAB
TBB HPA-ASSY-2
HPB-ASSY-1 44 / 224
102 97
TAC70X280-2LA
TBC100X375-2 BACKHOE
HFS 70 //2.75
102 4.00 280
375 / 14.76
11.02 122 / 4.92
125 4.80 52 / 1.77
45 2.06 16 / 0.98
25 0.63 30 14
0 TAB
TBB HPA-ASSY-2
HPB-ASSY-1 45//217
98 99
TAC70X280-2RA
HFS 70 //2.75
102 4.00 280 11.02
375 / 14.76 122 / 5.59
142 4.80 52 / 1.57
40 2.06 16 / 0.98
25 0.63 30 14 TAB
TBB HPA-ASSY-2
HPB-ASSY-1 45 / 246
112 99
TAC70X320-1B
HFS 70 //2.75
102 4.00 320 12.60
375 / 14.76 115 / 5.59
142 4.53 35 / 1.57
40 1.38 18 / 0.98
25 0.71 30 0
14 TAB
TBB HPA-ASSY-2
HPB-ASSY-1 40 / 246
112 88
TAC70X400-1B
TBC100X410-11 BACKHOE 70 //2.75
102 4.00 400 15.75
410 / 16.14 115 / 8.56
217 4.53 35 / 2.75
70 1.38 18 / 1.34
34 0.71 30
22.5 0 TAB
TBB HPA-ASSY-2
HPB-ASSY-1 53 //116
144 317
TAC70X400-2B
TBC100X410-3A BACKHOE/HFS 70 / /4.00
100 2.75 400
410/16.14
15.75 125 / 5.70
145 4.90 35 / 1.77
45 1.38 18 / .98
25 .71 30 0 TAB
TBB HPA-ASSY-2
HPB-ASSY-1 61 //135
112 246
TAC70X400-3LB
TBC100X410-4LA BACKHOE/HFS 70 / /4.00
100 2.75 400
410/16.14
15.75 125 / 5.70
145 4.90 35 / 1.77
45 1.38 18 / .98
25 .71 30 10 TAB
TBB HPA-ASSY-2
HPB-ASSY-1 60 //131
112 248
TAC70X400-3RB
TBC100X410-4RA BACKHOE/HFS 70 / /4.00
100 2.75 400
410/16.14
15.75 125 / 5.70
145 4.90 35 / 1.77
45 1.38 18 / .98
25 .71 30 10 TAB
TBB HPA-ASSY-2
HPB-ASSY-1 60 //131
112 248
TAC80X305-3
HFS 80 //3.15
102 4.00 305
430 / 12.01
16.93 130
125 / 5.12
4.92 57
45 / 2.25
1.77 22
25 / 0.87
0.98 30 0 TAB
TBB HPA-ASSY-2
HPB-ASSY-1 54 //119
104 229
TAC80X305-4L
HFS 80 //3.15
102 4.00 305 / 16.93
430 12.01 130 / 4.92
125 5.12 57 / 1.77
45 2.25 22 / 0.98
25 0.87 30 14
22 TAB
TBB HPA-ASSY-2
HPB-ASSY-1 54 //119
107 236
TAC80X305-4R
HFS 80 //3.15
102 4.00 305 / 16.93
430 12.01 130 / 4.92
125 5.12 57 / 1.77
45 2.25 22 / 0.98
25 0.87 30 14
22 TAB
TBB HPA-ASSY-2
HPB-ASSY-1 54 //119
107 236
TAC80X320-1A
TBC120X230-1A BACKHOE/HFS
HFS 80 //3.15
121 4.75 320 / 9.06
230 12.6 95 //3.75
145 5.71 30 / 1.77
45 1.18 22//1.61
41 .87 30 0 TAB
TBB HPA-ASSY-2
HPB-ASSY-1 44//173
78 98
TAC80X320-2LA
TBC120X325-1 BACKHOE/HFS 80 //3.15
121 4.75 320//12.80
325 12.6 93 //3.68
197 7.77 30 / 2.62
67 1.18 22//1.65
42 .87 30 10
0 TAB
TBB HPA-ASSY-2
HPB-ASSY-1 44 / 234
106 98
TAC80X320-2RA
TBC120X325-2L BACKHOE/HFS 80 //3.15
121 4.75 320//12.80
325 12.6 93 //3.68
197 7.77 30 / 2.62
67 1.18 22//1.65
42 .87 30 10
8 TAB
TBB HPA-ASSY-2
HPB-ASSY-1 44 / 235
107 98
TAC90X225-1
TBC120X325-2R HFS
BACKHOE/HFS 89 //3.50
121 4.75 225//12.80
325 8.86 128 / 7.77
197 5.03 36 / 2.62
67 1.42 31 / 1.65
42 1.22 30 0
8 TAB
TBB HPA-ASSY-2
HPB-ASSY-1 47 //104
107 235
TAC90X225-2L
TBC120X350-2LA HFS 89 //3.50
121 4.75 225//13.78
350 8.86 128 / 5.71
145 5.03 36 / 1.93
44 1.42 31 / 1.65
42 1.22 30 17.5
11.4 TAB
TBB HPA-ASSY-2
HPB-ASSY-1 49 //108
112 247
TAC90X225-2R
TBC120X350-2RA HFS 89 //3.50
121 4.75 225//13.78
350 8.86 128 / 5.71
145 5.03 36 / 1.93
44 1.42 31 / 1.65
42 1.22 30 17.5
11.4 TAB
TBB HPA-ASSY-2
HPB-ASSY-1 49 //108
112 247
TAC90X245-1A
TBC120X350-3A HFS 89 //3.50
121 4.75 245//13.78
350 9.65 105 / 5.71
145 4.13 35 / 1.47
38 1.38 24 / 1.65
42 0.94 30 0 TAB
TBB HPA-ASSY-2
HPB-ASSY-1 37 / 245
111 81
TAC90X245-2LA
TBC120X330-1A HFS 89 //3.50
121 4.75 245//12.99
330 9.65 105 / 5.71
145 4.13 35 / 1.77
45 1.38 24 / 1.65
42 0.94 30 22
0 TAB
TBB HPA-ASSY-2
HPB-ASSY-1 37 / 230
104 81
TAC90X245-2RA
TBC120X330-2LA HFS 89 //3.50
121 4.75 245//12.99
330 9.65 105
145 / 4.13
5.71 35
45 / 1.38
1.77 24
42 / 0.94
1.65 30 22 TAB
TBB HPA-ASSY-2
HPB-ASSY-1 37 / 230
104 81
TAC90X270-5
TBC120X330-2RA BACKHOE
HFS 89 //3.50
121 4.75 270
330 / 10.63
12.99 128 / 5.71
145 5.04 60 / 1.77
45 2.36 24 / 1.65
42 0.94 30 0
22 TAB
TBB HPA-ASSY-2
HPB-ASSY-1 57 //125
108 238
TAC90X270-6L
TBC120X380-1A BACKHOE 89 //3.50
121 4.75 270 / 14.97
380 10.63 128
165//5.04
6.5 60 / 2.47
63 2.36 24 / 1.65
42 0.94 30 14
0 TAB
TBB HPA-ASSY-2
HPB-ASSY-1 58 //127
115 254
TAC90X270-6R
TBC120X380-2LA BACKHOE 89 //3.50
121 4.75 270 / 14.97
380 10.63 128
165//5.04
6.5 60 / 2.47
63 2.36 24 / 1.65
42 0.94 30 14
11.4 TAB
TBB HPA-ASSY-2
HPB-ASSY-1 58 //127
120 265
TAC90X320-5
TBC120X380-2RA BACKHOE 89 //3.50
121 4.75 320 / 14.97
380 12.60 128
165//5.04
6.5 60 / 2.47
63 2.36 24 / 1.65
42 0.94 30 0
11.4 TAB
TBB HPA-ASSY-2
HPB-ASSY-1 72 //159
120 265
TAC90X320-6L
HFS 89 //3.50
121 4.75 320
394 / 12.60
15.50 128
140 / 5.04
5.51 60 2.36
45 / 1.77 24 / 1.65
42 0.94 30 14
0 TAB
TBB HPA-ASSY-2
HPB-ASSY-1 74 //163
103 227
TAC90X320-6R
HFS 89 //3.50
121 4.75 320
394 / 12.60
15.50 128
140 / 5.04
5.51 60
45 / 2.36
1.77 24 / 1.65
42 0.94 30 14
22 TAB
TBB HPA-ASSY-2
HPB-ASSY-1 74 / 210
95 163
TAC90X360-1
TBC120X395-2R HFS 89 //3.50
121 4.75 360
394 / 14.17
15.50 125
140 / 4.94
5.51 36
45 / 1.42
1.77 24
42 / 0.94
1.65 30 0
22 TAB
TBB HPA-ASSY-2
HPB-ASSY-1 73 / 210
95 160
TAC90X360-2L
TBC120X395-3 HFS
BACKHOE 89 //3.50
121 4.75 360
394 / 14.17
15.50 128
197 / 5.03
7.77 36
67 / 1.42
2.64 24
42 / 0.94
1.65 30 14
0 TAB
TBB HPA-ASSY-2
HPB-ASSY-1 74 //164
123 272
TAC90X360-2R
TBC120X395-4L HFS
BACKHOE 89 //3.50
121 4.75 360
394 / 14.17
15.50 128
197 / 5.03
7.77 36
67 / 1.42
2.64 24
42 / 0.94
1.65 30 14
22 TAB
TBB HPA-ASSY-2
HPB-ASSY-1 74 //164
132 292
TAC90X390-1L
TBC120X395-4R HFS
BACKHOE 89 //3.50
121 4.75 390
394 / 15.35
15.50 128
197 / 5.03
7.77 36
67 / 1.42
2.64 24
42 / 0.94
1.65 30 14
22 TAB
TBB HPA-ASSY-2
HPB-ASSY-1 81 //179
132 290
TAC90X390-1R
TBC120X395-5 HFS 89 //3.50
121 4.75 390
394 / 15.35
15.50 128
203 / 5.03
8.00 36
75 / 1.42
2.95 24
42 / 0.94
1.65 30 14
0 TAB
TBB HPA-ASSY-2
HPB-ASSY-1 81 //179
124 274
TAC90X430-1L
TBC120X395-6L HFS 89 //3.50
121 4.75 430
394 / 16.93
15.51 203 / 5.03
128 8.00 75 / 1.42
36 2.95 24 / 1.65
42 0.94 30 14
22 TAB
TBB HPA-ASSY-2
HPB-ASSY-1 89 //197
135 297
TAC90X430-1R
TBC120X395-6R HFS 89 //3.50
121 4.75 430 / 15.51
394 16.93 128 / 8.00
203 5.03 36 / 2.95
75 1.42 24 / 1.65
42 0.94 30 14
22 TAB
TBB HPA-ASSY-2
HPB-ASSY-1 89 //197
135 297
TBC100X290-3A
TBC120X410-1 HFS 102 / 4.75
121 4.00 290 / 16.14
410 11.42 150
140 // 5.92
5.51 64// 2.50
45 1.77 25/ /.98
42 1.65 30 0 TBB HPB-ASSY-1 86 //192
106 234
TBC100X290-4LA
TBC120X410-2L HFS 102 / 4.75
121 4.00 290 / 16.14
410 11.42 150
140 // 5.92
5.51 64// 2.50
45 1.77 25/ /.98
42 1.65 30 22 TBB HPB-ASSY-1 87 //191
110 242
TBC100X290-4RA
TBC120X410-2R HFS 102 / 4.75
121 4.00 290 / 16.14
410 11.42 150
140 // 5.92
5.51 64// 2.50
45 1.77 25/ /.98
42 1.65 30 22 TBB HPB-ASSY-1 87 //191
111 244
TBC100X320-2LB
TBC120X410-3L HFS 102// 4.00
121 4.75 320 / 16.14
410 12.60 145 / 6.71
170 5.70 45// 1.77
48 1.89 4225/.98
/ 1.65 30 10
14 TBB HPB-ASSY-1 88 //194
141 311
TBC100X320-2RB
TBC120X410-3R HFS 121 / 4.00
102 4.75 410 / 12.60
320 16.14 170 / 5.70
145 6.71 48
45// 1.77
1.89 42 / 1.65
25/.98 30 14
10 TBB HPB-ASSY-1 145
88 //194
319
TBC120X410-4 HFS 121 / 4.75 410 / 16.14 170 / 6.71 48 / 1.89 42 / 1.65 30 0 TBB HPB-ASSY-1 141 / 311
TBC120X420-3 HFS 121 / 4.75 420 / 16.54 170 / 6.69 52 / 2.03 42 / 1.65 34.5 0 TBB HPB-ASSY-1 125 / 275
TBC120X420-4L HFS 121 / 4.75 420 / 16.54 170 / 6.69 52 / 2.03 42 / 1.65 34.5 15 TBB HPB-ASSY-1 130 / 286
TBC120X420-4R HFS 121 / 4.75 420 / 16.54 170 / 6.69 52 / 2.03 42 / 1.65 34.5 15 TBB HPB-ASSY-1 130 / 286
TBC120X440-1B HFS 121 / 4.75 440 / 17.32 145 / 5.71 43 / 1.68 42 / 1.65 30 0 TBB HPB-ASSY-1 108 / 237
TBC120X440-2LB HFS 121 / 4.75 440 / 17.32 145 / 5.71 43 / 1.68 42 / 1.65 30 11.5 TBB HPB-ASSY-1 111 / 244
TBC120X440-2RB HFS 121 / 4.75 440 / 17.32 145 / 5.71 43 / 1.68 42 / 1.65 30 11.5 TBB HPB-ASSY-1 108 / 239
Blunt of lip plate is 2/.08 smaller than dimension “E”. Continued on the next page.

®
TABLE OF CONTENTS

Spade Angle
B
B
F E A
D
F E A C
D
C
A B C D E F
TAC70X240-1B
TBC120X470-1A BACKHOE
HFS 70 //2.75
121 240//18.50
4.75 470 9.45 115
145 / 4.53
5.71 35
43 / 1.38
1.68 18
42 / 0.71
1.65 30 0 TAB
TBB HPA-ASSY-2 33//211
HPB-ASSY-1 96 72
TAC70X240-2L
TBC120X535-3 HFS 70 //2.75
121 240//21.06
4.75 535 9.45 99 //3.91
145 5.71 28
43 / 1.10
1.68 18
42 / 0.71
1.65 30 14
0 TAB
TBB HPA-ASSY-2 38 / 335
HPB-ASSY-1 152 83
TAC70X240-2R
TBC120X535-4L HFS 70 //2.75
121 240//21.06
4.75 535 9.45 99 //3.91
145 5.71 28
43 / 1.10
1.68 18
42 / 0.71
1.65 30 14
11.5 TAB
HPB-ASSY-1 150 83
TAC70X280-1A
HFS 70 //2.75
121 4.75 280
535 / 11.02
21.06 122
145 / 4.80
5.71 52
43 / 2.06
1.68 16
42 / 0.63
1.65 30 0
11.5 TAB
HPB-ASSY-1 150 97
TAC70X280-2LA
HFS 70 //2.75
140 5.50 280
420 / 11.02
16.54 122
170 / 4.80
6.69 52
55 / 2.06
2.17 16
46 / 0.63
1.81 30 14
0 TAB
HPB-ASSY-1 163 99
TAC70X280-2RA
TBC140X420-2LA BACKHOE
HFS 70 //2.75
140 5.50 280
420 / 11.02
16.54 122
170 / 4.80
6.69 52
55 / 2.06
2.17 16
46 / 0.63
1.81 30 14
11.5 TAB
HPB-ASSY-1 163 99
TAC70X320-1B
TBC140X420-2RA BACKHOE
HFS 70 //2.75
140 5.50 320
420 / 12.60
16.54 115
170 / 4.53
6.69 35
55 / 1.38
2.17 18
46 / 0.71
1.81 30 0
11.5 TAB
HPB-ASSY-1 163 88
TAC70X400-1B
TBC140X465-1LB BACKHOE 70 //2.75
140 5.50 400
465 / 15.75
18.31 115
200 / 4.53
7.87 35
80 / 1.38
3.15 18
46 / 0.71
1.81 30 0
11.5 TAB
TBB HPA-ASSY-2 53 //116
HPB-ASSY-1 195 431
TAC70X400-2B BACKHOE/HFS
TBC140X465-1RB BACKHOE 70 //2.75
140 5.50 400
465 / 15.75
18.31 125
200 / 4.90
7.87 35
80 / 1.38
3.15 18//1.81
46 .71 30 0
11.5 TAB
HPB-ASSY-1 195 431
TAC70X400-3LB
TBC140X465-3A BACKHOE/HFS 140 70 //2.75
5.50 400
465 / 15.75
18.31 125
165 / 4.90
6.50 35
64 / 1.38
2.50 18//1.81
46 .71 30 10
0 TAB
HPB-ASSY-1 186 409
TAC70X400-3RB
TBC140X490-1B BACKHOE/HFS
BACKHOE 70 //2.75
140 5.50 400
490 / 15.75
19.29 125
200 / 4.90
7.87 35
80 / 1.38
3.15 18//1.81
46 .71 30 10
0 TAB
HPB-ASSY-1 199 439
TAC80X305-3
TBC140X490-2LB BACKHOE 80 //3.15
140 5.50 305
490 / 12.01
19.29 130
200 / 5.12
7.87 57
80 / 2.25
3.15 22
46 / 0.87
1.81 30 0
11.5 TAB
HPB-ASSY-1 201 443
TAC80X305-4L
TBC140X490-2RB BACKHOE 80 //3.15
140 5.50 305
490 / 12.01
19.29 130
200 / 5.12
7.87 57
80 / 2.25
3.15 22 / 1.81
46 0.87 30 14
11.5 TAB
TBB HPA-ASSY-2 201
HPB-ASSY-1 54 //119
443
TAC80X305-4R
TBC140X575-1LA BACKHOE 80 //3.15
140 5.50 305
575 / 12.01
22.64 130
221 / 5.12
8.69 57
76 / 2.25
3.01 22 / 1.81
46 0.87 30 14
11.5 TAB
TBB HPA-ASSY-2 201
HPB-ASSY-1 54 //119
443
TAC80X320-1A BACKHOE/HFS
TBC140X575-1RA BACKHOE 80 //3.15
140 5.50 575320//22.64
12.6 95 //3.75
221 8.69 30
76 / 1.18
3.01 22//1.81
46 .87 30 0
11.5 TAB
TBB HPA-ASSY-2 201
HPB-ASSY-1 44 / 443
98
TAC80X320-2LA
TBC150X445-1 BACKHOE/HFS
BACKHOE 80 //3.15
152 6.00 445320//17.50
12.6 93 //3.68
211 8.30 30
73 / 1.18
2.86 22//2.10
53 .87 30
33 10
0 TAB
HPB-ASSY-1 152 98
TAC80X320-2RA
TBC150X445-2L BACKHOE/HFS
BACKHOE 80 //3.15
152 6.00 445320//17.50
12.6 93 //3.68
211 8.30 30
73 / 1.18
2.86 22//2.10
53 .87 30
33 10
14 TAB
HPB-ASSY-1 156 344
TAC90X225-1
TBC150X445-2R HFS
BACKHOE 89 //3.50
152 6.00 445225//17.50
8.86 128
211 / 5.03
8.30 36
73 / 1.42
2.86 31
53 / 1.22
2.10 30
33 0
14 TAB
HPB-ASSY-1 156 344
TAC90X225-2L
TBC160X370-1 HFS 89 //3.50
160 6.30 370225//14.57
8.86 128
200 / 5.03
7.87 36
60 //2.35
1.42 31
56 / 1.22
2.21 30 17.5
0 TAB
HPB-ASSY-1 163 360
TAC90X225-2R
TBC160X370-2L HFS 89 //3.50
160 6.30 370225//14.57
8.86 128
200 / 5.03
7.87 36
65 / 1.42
2.56 31
56 / 1.22
2.21 30 17.5
14 TAB
HPB-ASSY-1 163 360
TAC90X245-1A
TBC160X370-2R HFS 89 //3.50
160 6.30 370245//14.57
9.65 105
200 / 4.13
7.87 35
65 / 1.38
2.56 24
56 / 0.94
2.21 30 0
14 TAB
HPB-ASSY-1 163 360
TAC90X245-2LA
TBC160X430-2L HFS
BACKHOE 89 //3.50
160 6.30 430245//16.93
9.65 105
176 / 4.13
6.94 35
64 / 1.38
2.52 24
56 / 0.94
2.20 30 22
14 TAB
HPB-ASSY-1 166 366
TAC90X245-2RA
TBC160X430-2R HFS
BACKHOE 89 //3.50
160 245//16.93
6.30 430 9.65 105
176 / 4.13
6.94 35
64 / 1.38
2.52 24
56 / 0.94
2.20 30 22
14 TAB
HPB-ASSY-1 166 366
TAC90X270-5
HFS 89 //3.50
160 6.30 270
450 / 10.63
17.72 128 / 7.89
200 5.04 60 / 2.50
64 2.36 24 / 2.13
54 0.94 30 0 TAB
TBB HPA-ASSY-2 207
HPB-ASSY-1 57 / /456
125
TAC90X270-6L
HFS 89 //3.50
160 270 / 17.72
6.30 450 10.63 128 / 7.75
197 5.04 60 / 2.56
65 2.36 24 / 2.21
56 0.94 30 14 TAB
TBB HPA-ASSY-2 205
HPB-ASSY-1 58 //127
450
TAC90X270-6R
HFS 89 //3.50
160 270 / 17.72
6.30 450 10.63 128 / 7.75
197 5.04 60 / 2.56
65 2.36 24 / 2.21
56 0.94 30 14 TAB
TBB HPA-ASSY-2 205
HPB-ASSY-1 58 //127
450
TAC90X320-5
TBC160X450-3 BACKHOE 89 //3.50
160 320 / 17.72
6.30 450 12.60 128 / 9.84
250 5.04 60 / 3.56
90 2.36 24 / 2.20
56 0.94 30 0 TAB
TBB HPA-ASSY-2 183
HPB-ASSY-1 72 //159
403
TAC90X320-6L
TBC160X450-4L BACKHOE 89 //3.50
160 6.30 320
450 / 12.60
17.72 128
250 / 5.04
9.84 60
90 / 2.36
3.56 24
56 / 0.94
2.20 30 14 TAB
HPB-ASSY-1 187 412
TAC90X320-6R
TBC160X450-4R BACKHOE 89 //3.50
160 6.30 320
450 / 12.60
17.72 128
250 / 5.04
9.84 60
90 / 2.36
3.56 24 / 0.94 30 14 TAB
HPB-ASSY-1 187 412
TAC90X360-1
TBC160X465-1 HFS
BACKHOE 89 //3.50
160 6.30 360
465 / 14.17
18.31 125
176 / 4.94
6.94 36
64 / 1.42
2.52 24
56 / 0.94
2.20 30 0 TAB
HPB-ASSY-1 166 366
TAC90X360-2L
TBC160X465-2L HFS
BACKHOE 89 //3.50
160 6.30 360
465 / 14.17
18.31 128
176 / 5.03
6.94 36
64 / 1.42
2.52 24
56 / 0.94
2.20 30 14 TAB
HPB-ASSY-1 173 381
TAC90X360-2R
TBC160X465-2R HFS
BACKHOE 89 //3.50
160 6.30 360
465 / 14.17
18.31 128
176 / 5.03
6.94 36
64 / 1.42
2.52 24
56 / 0.94
2.20 30 14 TAB
HPB-ASSY-1 173 381
TAC90X390-1L
TBC160X520-1L HFS 89 //3.50
160 6.30 390
520 / 15.35
20.47 128
227 / 5.03
8.94 36
64 / 1.42
2.50 24
56 / 0.94
2.21 30 14 TAB
HPB-ASSY-1 298 656
TAC90X390-1R
TBC160X520-1R HFS 89 //3.50
160 6.30 390
520 / 15.35
20.47 128
227 / 5.03
8.94 36
64 / 1.42
2.50 24
56 / 0.94
2.21 30 14 TAB
HPB-ASSY-1 298 656
TAC90X430-1L
TBC160X570-1L HFS 89 //3.50
160 6.30 430
570 / 16.93
22.44 128
227 / 5.03
8.94 36
64 / 1.42
2.50 24
54 / 0.94
2.13 30 14 TAB
TBB HPA-ASSY-2 324
HPB-ASSY-1 89 //197
714
TAC90X430-1R
TBC160X570-1R HFS 89 //3.50
160 430 / 22.44
6.30 570 16.93 128 / 8.94
227 5.03 36 / 2.50
64 1.42 24 / 2.13
54 0.94 30 14 TAB
TBB HPA-ASSY-2 324
HPB-ASSY-1 89 //197
714
TBC160X430-1
HFS 160
102 / 6.30
4.00 430
290 / 16.93 176 // 5.92
11.42 150 6.94 64
64//2.52
2.50 56
25/2.20
/.98 30 0 TBB HPB-ASSY-1 159
86 //192
351
TBC100X290-4LA HFS 102 / 4.00 290 / 11.42 150 / 5.92 64/ 2.50 25 /.98 30 22 TBB HPB-ASSY-1 87 / 191
Blunt of lip plate is 2/.08
TBC100X290-4RA HFSsmaller 102
than/ 4.00
dimension “E”. 150 / 5.92
290 / 11.42 64/ 2.50 25 /.98 30 22 TBB HPB-ASSY-1 87 / 191
Note: Center shroudsHFS
TBC100X320-2LB are designated with “0”
102/ 4.00 320degree
/ 12.60 spade angle.
145 / 5.70 All
45/ other
1.77 spade
25/.98angles30are left
10 and right
TBB hand shrouds.88 / 194
HPB-ASSY-1
TBC100X320-2RB HFS 102 / 4.00 320 / 12.60 145 / 5.70 45/ 1.77 25/.98 30 10 TBB HPB-ASSY-1 88 / 194

Bucket Lip Shrouds TABLE OF CONTENTS
Wheel Loader Face Shovel/Hoe

Weld-on Lip Shrouds Weld-on Lip Shrouds
Type 2 Type 4 Type 5 Type 6
ess
hickn
Lip T ss
kne
s Thic
ck nes Lip
Thi
B B Lip B
C
C C
Type 2 – This XHD design shrouds for high abrasion applications Type 6 – STD design shroud for
features added wear metal on the top center of the shrouds for longer the most abrasive face shovel and
life and tapered sides so no trimming is required for spade lips. large hoe applications. Shrouds
can be trimmed as needed to fit
Types 4 & 5 – These STD design shrouds for abrasive applications
unique lip designs.
feature most of the wear metal on the bottom of the shroud for long life
in FEL applications.
MiniMUM LiP MaXiMUM LiP B C RaMP SPaDe

MaCHine THiCKneSS THiCKneSS WiDTH eXTenSiOn angLe angLe WeigHT
PaRT iD TYPe STYLe mm/in mm/in mm/in mm/in deg deg kg/lb
LS2.0-12-1 FEL 5 38 / 1.50 51 / 2.00 305 / 12.00 99 / 3.88 30 0-10 17 / 37
18-3570 FEL 2 51 / 2.00 51 / 2.00 314 / 12.35 127 / 5.00 30 0 35 / 78
18-3390 FEL 2R 51 / 2.00 51 / 2.00 314 / 12.35 127 / 5.00 23 10 35 / 78
18-3380 FEL 2L 51 / 2.00 51 / 2.00 314 / 12.35 127 / 5.00 23 10 35 / 78
LS2.5-15 FEL 4 51 / 2.00 64 / 2.50 381 / 15.00 105 / 4.15 30 0 26 / 57
LS2.5-15-1 FEL 5 51 / 2.00 64 / 2.50 381 / 15.00 105 / 4.15 30 0-10 25 / 55
WSC70X250-1 FEL/HFS 4 60 / 2.38 76 / 3.00 250 / 9.84 115 / 4.53 30 0 21 / 47
WSC70X230-1L HFS 6 64 / 2.50 76 / 3.00 230 / 9.06 94 / 3.72 30 15 22 / 49
WSC70X230-1R HFS 6 64 / 2.50 76 / 3.00 230 / 9.06 94 / 3.72 30 15 22 / 49
B70-500M FEL/HFS 4 64 / 2.50 76 / 3.00 249 / 9.80 115 / 4.53 30 0 80 / 176
B70-1L HFS 4L 64 / 2.50 76 / 3.00 196 / 7.70 108 / 4.27 30 29 19 / 41
B70-1R HFS 4R 64 / 2.50 76 / 3.00 196 / 7.70 108 / 4.27 30 29 19 / 41
PDE32215 LOWER WING HFS WELDON 64 / 2.50 64 / 2.50 102 / 4.00 140 / 5.5 0 0 43 / 94
LS2.5-17 FEL 5 76 / 3.00 89 / 3.50 381 / 15.00 179 / 7.06 30 0-10 26 / 58
LS3.5-15-1 FEL 5 76 / 3.00 89 / 3.50 381 / 15.00 179 / 7.06 30 0-10 51 / 112
WSC90X360-1 FEL/HFS 6 76 / 3.00 102 / 4.00 360 / 14.17 100 / 3.94 30 0 31 / 68
WSC90X360-1L FEL/HFS 6 76 / 3.00 102 / 4.00 360 / 14.17 100 / 3.94 30 14 31 / 68
WSC90X360-1R FEL/HFS 6 76 / 3.00 102 / 4.00 360 / 14.17 100 / 3.94 30 14 31 / 68
PDE53615-1 HFS 6 76 / 3.00 102 / 4.00 271 / 10.67 100 / 3.94 30 0 24 / 53
LS4.0-15 FEL 5 89 / 3.50 102 / 4.00 381 / 15.00 195 / 7.66 30 0-10 73 / 161
LS4.0-18 FEL 5 89 / 3.50 102 / 4.00 457 / 18.00 195 / 7.66 30 0-10 84 / 186
PDE53615-3R BACKHOE/HFS 6 89 / 3.50 102 / 4.00 271 / 10.67 100 / 3.94 30 14 23 / 51
PDE53615-3L BACKHOE/HFS 6 89 / 3.50 102 / 4.00 271 / 10.67 100 / 3.94 30 14 23 / 51
LS5.5-18 HFS 6 127 / 5.00 152 / 6.00 457 / 18.00 248 / 9.78 30 0 113 / 250
LS6.0-25 HFS 6 127 / 5.00 152 / 6.00 635 / 25.00 248 / 9.78 30 0 169 / 373
Application Note: If no spade angle is shown, the shroud is designed to fit on a straight lip sections between adapters. Length
may be trimmed for narrower spacing. Shrouds may also be used on spade positions, but slight trimming may be required.

Bucket Lip and Wing Shrouds TABLE OF CONTENTS
Wheel Loader
Bolt-on Lip Shrouds High abrasion upgrade from plate
Type 7 edge segments. Cast alloy 12S
provides extra hardness for long
life. The shroud wraps over the
top of the lip bevel to provide total
lip leading edge protection, not
just bottom protection. Use grade
8 plow bolts with a grade 8 nuts
as indicated.
B C
MiniMUM LiP MaXiMUM LiP WiDTH eXTenSiOn RaMP SPaDe BOLT
MaCHine THiCKneSS THiCKneSS angLe angLe HOLe BOLT SiZe WeigHT
PaRT iD TYPe STYLe mm/in mm/in mm/in mm/in deg deg SPaCing (QTY) kg/lb
LSB1.8-12.5 FEL 7 38 / 1.50 44 / 1.75 318 / 12.50 87 / 3.44 23 0 160 / 6.30 (2) 1.25 INCH 18.6 / 41.0
PDE52098 FEL 7 51 / 2.00 51 / 2.00 337 / 13.25 119 / 4.70 30 0 105 / 4.13 (3) 1.38 INCH 40.4 / 89.0
Wheel Loader and Face Shovel

Pin-on Wing Shrouds
A mechanical shroud that pins on
to a permanently installed base
on the side plate of a bucket.
Replacement is fast and only
requires a hammer and drift pin or
removal tool.
MiniMUM Wing MaXiMUM Wing B C Pin / LOCK

MaCHine THiCKneSS THiCKneSS WiDTH HeigHT iD WeigHT
PaRT iD TYPe TYPe mm/in mm/in mm/in mm/in (QTY) kg/lb
PDE34294 FEL/HFS Wing Base 76 / 3.00 152 / 6.00 216 / 8.50 673 / 26.50 N/A 91 / 200
PDE34294-1 FEL/HFS Wing Base 76 / 3.00 152 / 6.00 216 / 8.50 673 / 26.50 N/A 79 / 175
PDE52445** FEL/HFS Wing Shroud 80 / 3.15 80 / 3.15 229 / 9.00 889 / 35.00 (2) PDB31183#3 (2) 120KLKSR 99 / 218
PDE52420* FEL/HFS Wing Shroud 102 / 4.00 102 / 4.00 254 / 10.00 1092 / 43.00 (2) PDB31183#2 (2) 120KLKSR 215 / 474
PDE34295 FEL/HFS Wing Shroud 152 / 6.00 N/A 251 / 9.90 829 / 32.62 (2) PDB31183#1 (4) 120KLKSR 96 / 211
PDE43723-2 FEL/HFS Wing Shroud 202 / 7.95 N/A 316 / 12.46 1081 / 42.54 (2) PDB31183#2 (4) 120KLKSR 174 / 384
PDE43723-3 FEL/HFS Wing Shroud 202 / 7.95 N/A 316 / 12.46 1081 / 42.54 (2) PDB31183#2 (4) 120KLKSR 190 / 420
*Requires no base. Designed to fit 100mm/4.00in. plate wing

**Requires no base. Designed to fit 80mm/3.15in. plate wing

Miscellaneous Hydraulic Machine Shrouds TABLE OF CONTENTS
Part OeM Weight Lip Machine

iD no. Description Kg / Lb Type Type
07917 79176 MAGLOK WING SHROUD 117 / 259 2.5" PLATE LIP Hydraulic
07915 LS4-1175 MAGLOK SHROUD RH/LH 106 / 234 4" PLATE LIP Hydraulic
07920 LS475-1500 MAGLOK LIP SHROUD 132 / 291 4.75" PLATE LIP Hydraulic
08028 PDE46780L LIP SHROUD LH 314 / 693 CONICAL 130 Hydraulic
08029 PDE46780R LIP SHROUD RH 315 / 695 CONICAL 130 Hydraulic
08030 PDE46788 LIP SHROUD CTR 314 / 692 CONICAL 130 Hydraulic
06178 DST300 TORQLOK SHROUD 345 / 760 S145 Lip Hydraulic
Misc Hyd Mach Shrouds

Corner Wear Shoes TABLE OF CONTENTS
Weight a B C D E R
PMiD kg / lb Machine Type mm / in. mm / in. mm / in. mm / in. mm / in. mm / in.
CWS 50X190-1 21 / 47 EXC, FEL, LHD, HFS 190 / 7.48 164 / 6.46 270 / 10.63 105 / 4.12 193 / 7.60 1000 / 39.37
CWS 60X250-1 40 / 89 EXC, FEL, HFS 250 / 9.84 216 / 8.51 320 / 12.61 143 / 5.63 238 / 9.38 1000 / 39.37
CWS 100X250-1 78 / 171 EXC, FEL, HFS 250 / 9.84 269 / 10.60 361 / 14.20 151 / 5.93 238 / 9.38 1000 / 39.37
PDE57662 67 / 148 ESCO HFS Only 152 / 6.00 321 / 12.64 309 / 12.15 220 / 8.66 210 / 8.27 N/A
PDE56250 114 / 252 EXC, FEL, LHD, HFS 254 / 10.00 422 / 16.62 409 / 16.12 305 / 12.00 305 / 12.00 N/A
**Need new corner wear shoe images in the 2013 spec book

ESCO Numbering for Hydraulic Machine Lip Systems TABLE OF CONTENTS
Multi-Purpose Lip System
Example:
E138/50PU45AD-1
E= Multi-Purpose Style Lip (Ultralok tooth system with ESCO cast bolt-on shrouds)
®
138 = Inside Lip Width (inches)
50 = Lip Thickness in mm
P= Spade Lip Design, S = Straight Lip Design
U45 = Tooth Style and Size
AD = Tooth Shape
-1 = Sequential # for Lip Configuration (Note: not all lips have this suffix)

Multi-Purpose Lip System TABLE OF CONTENTS
Note: Straight lip shown - also available in spade versions.
Standard Features
• Ultralok tooth system
®
• Cast alloy bolt-on shrouds

• T1 plate lip
• Corner adapters shipped loose for easy installation
inside Lip Lip nose

Part iD Weight Width Thickness Size Machine
kg / lbs mm / in mm / in
38MM Lips
E138/38PU35AP 515 / 1134 3353 / 132 38 / 1.50 U35 CAT 980
45MM Lips
E118/45PU35AP-1 1080 / 2382 2997 / 118 45 / 1.75 U35 CAT 980
E120/45PU35AP-1 1094 / 2411 3048 / 120 45 / 1.75 U35 WA450
E123/45PU35AP-1 1099 / 2422 3124 / 123 45 / 1.75 U35 CAT 980
E132/45PU35AP-1 1112 / 2452 3251 / 128 45 / 1.75 U35 CAT 980
50MM Lips
E135/50PU45AP-1 (SPL) 1330 / 2933 3429 / 135 50 / 2.00 U45 VOLVO L220 (W WINGS)
E138/50PU45AP 1452 / 3200 3505 / 138 50 / 2.00 U45 CAT 988B, KOM WA600, KAW KSS 115Z
E143/50PU45AP 1497 / 3300 3632 / 143 50 / 2.00 U45 CAT 988B, KOM WA600, KAW KSS 115Z
E144/50SU45AP-1 1115 / 2458 3454 / 136 50 / 2.00 U45 CAT 988B, KOM WA600, KAW KSS 115Z
E145/50SU45AP-1 1117 / 2462 3480 / 137 50 / 2.00 U45 CAT 988B, KOM WA600, KAW KSS 115Z
65MM Lips
E168/65PU55AP 2358 / 5199 4267 / 168 65 / 2.50 U55 CAT 990
E180/65PU55AP-1 3006 / 6628 4572 / 180 65 / 2.50 U55 CAT 992
70MM Lips
E180/70PU60AP 3070 / 6768 4572 / 180 70 / 2.75 U60 CAT 992, WA800, WA900

ESCO Numbering for Hydraulic Machine Lip Systems TABLE OF CONTENTS
Loadmaster Plate Lips

®
L= Lip with Cast Wings

LM = Lip with Mechanical Adapters and Cast Wings
LH = Lip with No Wings
LHW = Lip with Plate Wings
Example:
L180/60PU45AP
L= Style of Lip: L = Loadmaster
60 = Lip Thickness in mm
P= Spade Lip Design, S = Straight Lip Design
®
U45 = Ultralok Tooth System, 45 Size
AP = Tooth Shape
-1 = Sequential # for Lip Configuration
Cast Lips
LCS = Loadmaster Cast Step Spade Lip
®
EC = EverSharp Cast Lip
N= Nemisys Cast Lip
Example:
Loadmaster Cast Step Spade Lip
LCS201S130-1
LCS = Style of Lip
S130 = Nose Size
Example:
EverSharp Cast Step Spade Lip
EC201S130-1
EC = Style of Lip
S130 = Nose Size
Example:
Nemisys Cast Lip
N5LP470-1-01-1S
N= Style of Lip
5= Nose Size
LP = Indicates a Lip
470 = Inside Lip Width (centimeters)
-1 = Wing Geometry
-01 = Two Digits Indicating Wear Package
-1 = One Digit Indicating Adapter
S= One to Two Letters Indicating Tip

Cast Wing for Loadmaster Lip Systems ® TABLE OF CONTENTS
395/15.55
90/3.54
116/4.57
18
108.5/4.27
175/6.89
30 403/15.88
140/5.47
616/24.27
LBW140 x 90-1
Wing Castings
Wing Casting Toplok® Wing Corner Center Lip Thickness Corner Weight Wing
Part no. Shroud adapter adapter mm / in kg / lb Type
6820L-S110 Hydraulic
LBW140 x 90-1 TBW90 x 855-1 5874-S110 140 / 5.50 322 / 710
6820R-S110 Shovel
75/2.95
75/2.95
305/12.00 334/13.15
147/5.78 166/6.54
361/14.20 389/15.30
25°
25°
418/16.45 424/16.70
30° 30°
100/ 120/
3.93 4.72
547/21.53 546/21.50
CC100 x 75 CC120 x 75
Cast Corner
Wing Corner Weight
Part no. Shroud adapter Center adapter Lip Thickness kg/lb Machine Type
CC100X75L TAW75-1 6839L-75SV2 5897W-75SV2 100 / 4.00 196 / 432 Hydraulic Shovel & Hoe
CC100X75R 6839R-75SV2
6839L-70SV2 5897W-70SV2 100 / 4.00 Hydraulic Shovel & Hoe
6839R-70SV2
5894L-70SV2 5896W-70SV2 100 / 4.00 Front End Loader
5894R-70SV2 5894RW-70SV2
5894LW-70SV2
CC120X75L TAW75-1 6845L-75SV2 6843W-75SV2 120 / 4.75 228 / 502 Front End Loader
CC120X75R 6845R-75SV2 6844LW-75SV2
6844RW-75SV2
Wing Corner Weight

CC120X90L TAW90-1 6838L-85SV2 ( 6810W-85SV2 120 / 4.75 265 / 585 Hydraulic Shovel & Hoe
20 – P7000MIN01L – Hydraulic Machine Products July 1, 2013) www.escocorp.com
CC120X90R 6838R-85SV2
6838L-75SV2 6810W-75SV2 120 / 4.75
Cast Wing for Loadmaster Lip Systems ® TABLE OF CONTENTS
89/ 89/
3.50 3.50
334/13.15 347/13.65
158/ 171/
6.24 6.74
391/15.38
400/15.74
25°
437/17.20
25°
30°
450/17.70
30°
120/
4.72
Wing578/22.75 Corner Weight 140/
5.51
591/23.25
CC100X75R 6839R-75SV2
6839L-70SV2
CC120 x 90 5897W-70SV2 100 / 4.00CC140 x 90 Hydraulic Shovel & Hoe
6839R-70SV2
5894R-70SV2 5894RW-70SV2
5894LW-70SV2
CC120X75L TAW75-1 6845L-75SV2 6843W-75SV2 120 / 4.75 228 / 502 Front End Loader
CC120X75R 6845R-75SV2 6844LW-75SV2
6844RW-75SV2
Cast Corner
Wing Corner Weight
CC120X90R 6838R-85SV2
6838L-75SV2 6810W-75SV2 120 / 4.75
6838R-75SV2
CC140X90R 6842R-85SV2
Wing Corner Weight

CC90X65R 6840R-65SV2
5838R-65SV2 5838LW-65SV2
5838RW-65SV2
LL70X50L TAW50-1 6852L-65SV2 3858W-65SV2 70 / 2.75 210 / 95 Hydraulic Shovel & Hoe
LL70X50R 6852R-65SV2
6853L-65SV2 6812W-65SV2 Front End Loader
6853R-65SV2

Nemisys Cast Lips TABLE OF CONTENTS
Tooth size Machine

nemisys Posilok (for reference) Hitachi Komatsu Bucyrus/CaT Liebherr
N1 S110/92K EX3600-6 PC4000 RH170B/6040 R9350-R994B
N3 S130/112K EX5500-6 PC5500 RH200/6050 R9400
N5 S130/122K RH340B/6060 R995
N7 S145/122K EX8000-6 PC8000 RH400/6090 R9800/R996B

Plate Lip Quote Form TABLE OF CONTENTS
Ref Description Dimension

A Middle Adapter Cenerline Spacing _________________
B Side Adapter Centerline Spacing __________________
C Adapter Width ________________________________
D Lip Spade Angle _______________________________
E Lip Thickness _________________________________
F Ramp _______________________________________
G Blunt________________________________________
X Distance to Radius Centerpoint ___________________
Y Height to Radius Centerpoint _____________________
R Radius ______________________________________
ISLW Inside Lip Width _______________________________

EverSharp for Load Haul Dump
EverSharp Lipassemblies
everSharp Lip Assemblies
ever Sharp Parts inSiDe LiP LiP SPaDe BeVeL BLUnT Wing WeigHT
PaRT iD WiDTH THiCKneSS angLe angLe THiCKneSS MaCHine TYPe
Center Shroud mm / in mm / in mm / in mm / in Kg / lb
ELHD73/50P 1854 / 73 50 / 2.0 10a 25 B15 / 0.59 50
C / 2.0 1146 / 2528 ST710
ELHD83/50P
PaRT iD 2100 / 83 50 / 2.0
DeSCRiPTiOn 10
WiDTH 25 DePTH15 / 0.59 50
HeigHT/ 2.0 1267
EST. /WT.
2794
ELHD91/50P 2311 / 91 50 / 2.0 mm10 / in 25 mm15 / 0.59
/ in mm50 // in
2.0 1371
kg // lb
3024
ELHD96/50P
LHDS50X490-3 2438 / Center
96 50 / 2.0
Shroud 56910
/ 22.40 25476 / 15 / 0.59
18.74 12350/ 4.84
/ 2.0 1496
79.8 // 176
3291 Toro 007
ELHD99/50P 2504 / 99 50 / 2.0 10 25 15 / 0.59 50 / 2.0 1486 / 3276 ST1520
ELHD100/50P 2540 / 100 50 / 2.0 10 25 15 / 0.59 50 / 2.0 1507 / 3323
intermediate
ELHD101/50PShrouds
2572 / 101 50 / 2.0 10 25 15 / 0.59 50 / 2.0 1522 / 3356
ELHD103/50P 2604 / 103 50 / 2.0 10a 25 B15 / 0.59 50
C / 2.0 1539 / 3394
ELHD104/50P
PaRT iD 2642 / DeSCRiPTiOn
104 50 / 2.0 10
WiDTH 25 DePTH15 / 0.59 50 / 2.0
HeigHT 1562
EST. /WT.
3437 Toro 1250E; 1400E
ELHD105/50P 2667 / 105 50 / 2.0 mm10 / in 25 mm15 / 0.59
/ in mm50 // in
2.0 1565
kg // lb
3444 ST-8C; ST1520
ELHD107/50P
LHDS50X295-3 2718Intermediate50
/ 107 / 2.0
Shroud 29510
/ 11.61 25476 / 15 / 0.59
18.74 50 / 2.0
123 / 4.84 1594 / 3507
47.5 / 105 Toro 1250; R1700
ELHD108/50P
LHDS50X315-3 2743 / 108 50 / 2.0
Intermediate Shroud 31510
/ 12.40 25476 / 15 / 0.59
18.74 50 / 2.0
123 / 4.84 1609 / 3539
50.8 / 112 Toro 1400
ELHD110/50P
LHDS50X330-3 2794Intermediate
/ 110 50 / 2.0
Shroud 33010
/ 12.99 25476 / 15 / 0.59
18.74 12350/ 4.84
/ 2.0 1640
53.3 // 118
3607 ST1520
ELHD111/50P
LHDS50X345-3 2819 / 111 50 / 2.0
Intermediate Shroud 34510/13.58 25476 / 15 / 0.59
18.74 12350/ 4.84
/ 2.0 1652 / 3635
56.2 /124 ST1510; ST1520
ELHD112/50P
LHDS50X360-3 2832 / 112 50 / 2.0
/ 14.17 25476 / 15 / 0.59
18.74 50 / 2.0
123 / 4.84 1649 / 3628
58.4 / 129 R1700; Toro 1400
ELHD113/50P 2950 / 113 50 / 2.0 10 25 15 / 0.59 50 / 2.0 1688 / 3714
LHDS50X370-3 Intermediate Shroud 370 / 14.57 476 / 18.74 123 / 4.84 60.0 / 132
ELHD114/50P 2896 / 114 50 / 2.0 10 25 15 / 0.59 50 / 2.0 1684 / 3705 Toro 0010
ELHD117/50P 2972 / 117 50 / 2.0 10 25 15 / 0.59 50 / 2.0 1729 / 3810 R2900
LHSD50X420-3 Intermediate Shroud 420 / 16.54 476 / 18.74 123 / 4.84 67.4 / 149
ELHD120/50P 3048 / 120 50 / 2.0 10 25 15 / 0.59 50 / 2.0 1771 / 3897 R1700
ELHD122/50P 3099 / 122 50 / 2.0 10 25 15 / 0.59 50 / 2.0 1796 / 3959
ELHD123/50P 3124 / 123 50 / 2.0 10 25 15 / 0.59 50 / 2.0 1829 / 4033 R2900
ELHD124/50P 3150 / 124 50 / 2.0 10 25 15 / 0.59 50 / 2.0 1768 / 3889 Toro 400LP; Toro 0011; ST1810
Corner Shrouds 3169 / 125
ELHD125/50P 50 / 2.0 10 25 15 / 0.59 50 / 2.0 1848 / 4075
ELHD128/50P
PaRT iD 3238 / 128 50 / 2.0
DeSCRiPTiOn 10a 25 B15 / 0.59 50
C / 2.0 1891
EST. /WT.
4169 R2900
ELHD129/50P 3270 / 129 50 / 2.0
LHDS50X380-3L Corner Shroud 50710
/ 19.96 25
450 / 15 / 0.59
17.72 50 / 2.0
123 / 4.84 1909 / 4210
110.1 / 244 R2900
ELHD132/50P 3354 / 132 50 / 2.0 10 25 15 / 0.59 50 / 2.0 1948 / 4294
LHDS50X380-3R Corner Shroud 507 / 19.96 450 / 17.72 123 / 4.84 110.1 / 244
ELHD142/50P 3600 / 142 50 / 2.0 10 25 15 / 0.59 50 / 2.0 2079 / 4584 CAT 980 Coal Loader
LHDS50X380-6L Worn Corner Shroud 507 / 19.96 399 / 15.71 123 / 4.84 83.4 / 184
LHDS50X380-6R Worn Corner Shroud 507 / 19.96 399 / 15.71 123 / 4.84 83.4 / 184
Corner Castings
PaRT iD DeSCRiPTiOn a B C EST. WT.
LHDC50-2L Corner Casting 275 / 10.82 537 / 21.14 341 / 13.41 121 / 267
LHDC50-2R Corner Casting 275 / 10.82 537 / 21.14 34 / 13.41 121 / 267
Bosses
Bosses & Pin Assembly
a B C
C
PaRT iD DeSCRiPTiOn WiDTH DePTH HeigHT EST. WT.
mm / in mm / in mm / in kg / lb
LHDB50X250-3 Boss 290 / 11.41 347 / 13.66 98 / 3.85 16.3 / 36
LHDB50X300-3 Boss 340 / 13.39 347 / 13.66 98 / 3.85 18.6 / 41 B A
LHDPN50-3B Pin Assembly 74 / 2.91 87 / 3.44 39 / 1.53 1.1 / 2.4

EverSharp for Load Haul Dump
ever Sharp Parts
Center
Center Shroud
Shroud
ever Sharp Parts
a B C
C
CenterPaRT
Shroud
iD DeSCRiPTiOn WiDTH DePTH HeigHT EST. WT.
mma/ in mmB/ in mmC/ in kg / lb
LHDS50X490-3
ever Sharp
PaRT Parts
iD Center Shroud
DeSCRiPTiOn 569 / 22.40
WiDTH 476 / 18.74
DePTH 123 / 4.84
HeigHT 79.8
EST./ WT.
176 B A
Center Shroud mm / in mm / in mm / in kg / lb
LHDS50X490-3
intermediate Shrouds Center Shroud 569 / 22.40 476 / 18.74 123 / 4.84 79.8 / 176
a B C
ever Sharp Parts a B C
Intermediate
CenterPaRT iDShrouds
intermediate
ShroudShrouds DeSCRiPTiOn WiDTH
mm / in DePTH
mm / in HeigHT
mm / in EST.
kg / WT.lb
LHDS50X490-3 Center Shroud mm
569 / in
/a22.40 mm
476 / in
/ B18.74 mmC
123 / in
/ 4.84 kg // lb
79.8 176
C
LHDS50X295-3
PaRT iD Intermediate Shroud
DeSCRiPTiOn 295 /
WiDTH 11.61 476 /
DePTH 18.74 123 /
HeigHT 4.84 47.5
EST./ WT.105
LHDS50X315-3 Intermediate Shroud 315
mm / 12.40
/ in 476
mm / 18.74
/ in 123
mm/ 4.84
/ in 50.8
kg // 112
lb
intermediate Shrouds
LHDS50X330-3
LHDS50X295-3
LHDS50X490-3 Intermediate
Intermediate Shroud
Shroud
Center Shroud 330
569 // 11.61
295 12.99
22.40 476 /// 18.74
476
476 18.74
18.74 123 // 4.84
123 4.84 53.3
47.5 /
/
79.8 176 118
105 B
LHDS50X345-3 Intermediate a 476 //B18.74 123 C A
LHDS50X315-3 Intermediate Shroud
Shroud 345 //13.58
315 12.40 476 18.74 123 // 4.84
4.84 56.2 //124
50.8 112
PaRT iD
LHDS50X360-3 DeSCRiPTiOn
Intermediate WiDTH DePTH HeigHT EST./ WT.
Shroud 360
330 / 14.17
/ 12.99 476 / 18.74
476 / 18.74 123 / 4.84
123 / 4.84 58.4
53.3 / 129118
intermediate ShroudsIntermediate Shroud
LHDS50X370-3 mm
370 / in
//13.58
14.57 mm
476 / in
// 18.74 mm// 4.84
123 / in kg 132
60.0 lb
LHDS50X345-3 Intermediate Shroud 345 476 18.74 123 4.84 56.2 //124
LHDS50X295-3
410 /a11.61
16.14 476 /B18.74 123 C / 4.84 47.5
65.8 / 105
145
LHDS50X315-3
LHSD50X420-3 Intermediate Shroud 315
420 / 12.40 476 / 18.74 123 / 4.84 50.8
EST.// WT.
112
PaRT iD
Intermediate Shroud 370 / 16.54
WiDTH 14.57 DePTH
476 / 18.74 HeigHT
123 / 4.84 67.4
60.0 149
132
LHDS50X330-3
450
mm / 12.99
17.72
/ in 476
mm / 18.74
/ in 123
mm// 4.84
/ in 53.3
kg // 118
72.1 / 159
lb
LHDS50X410-3 Intermediate Shroud 410 / 16.14 476 / 18.74 123 4.84 65.8 145
LHDS50X345-3
Intermediate Shroud 345 /13.58
525 56.2 //124
LHDS50X295-3
LHSD50X420-3 Intermediate Shroud
Shroud 420 // 20.67
295 11.61
16.54 476
476 // 18.74
18.74 123
123 // 4.84
4.84 84.2
47.5
67.4 / 187
105
149
LHDS50X360-3
Intermediate Shroud 360 / 14.17 476 / 18.74 123 / 4.84 58.4 / 129
Shroud 315
450 // 12.40
17.72 476
476 // 18.74
18.74 123
123 // 4.84
4.84 50.8
72.1 // 112
159
LHDS50X370-3
Intermediate Shroud 370 // 12.99
330 14.57 476 // 18.74
476 18.74 123 // 4.84
123 4.84 60.0 // 118
53.3 132
LHDS50X525-3
Corner Shrouds Intermediate Shroud 525 / 20.67 476 / 18.74 123 / 4.84 84.2 / 187
LHDS50X410-3
345 //13.58
16.14 476
476 // 18.74
18.74 123
123 // 4.84
4.84 65.8
56.2 //124
145
PaRT iD
LHSD50X420-3 DeSCRiPTiOn
Intermediate a B C EST. WT.
Shroud 420
360 // 16.54
14.17 476
476 // 18.74
18.74 123
123 // 4.84
4.84 67.4
58.4 // 149
129
Corner Shrouds
LHDS50X380-3L
LHDS50X450-3 Corner Shroud
Intermediate 507 / 19.96 450 / 17.72 123 / 4.84 110.1 / 244
Shroud 450
370 // 17.72
14.57 476
476 // 18.74
18.74 123
123 // 4.84
4.84 72.1
60.0 // 159
132
LHDS50X380-3R
LHDS50X525-3 Corner Shroud
525 450 //B18.74
17.72 123 C / 4.84 110.1
EST.///WT.244
PaRT iD
Intermediate Shroud 410 //a20.67
16.14 476
476 / 18.74 123
123 // 4.84
4.84 84.2
65.8 187
145
LHDS50X380-6L
LHDS50X380-3L Worn Corner
Corner Shroud
Shroud 507
507 // 16.54
19.96
19.96 399 / 15.71
450 / 18.74
17.72 123 / 4.84 83.4
110.1 / 184
LHSD50X420-3 Intermediate Shroud 420 476 123 / 4.84 67.4 //149 244
LHDS50X380-3R
LHDS50X450-3
Corner Shrouds
LHDS50X380-6R
Corner Shrouds Corner
Worn Shroud
Intermediate
Corner Shroud
Shroud 507
450 / 19.96
17.72
507 19.96 450
476 /
399 15.71 17.72
18.74 123 / 4.84 110.1
72.1 / /
83.4 184 244
159
LHDS50X380-6L
LHDS50X525-3 Worn Corner Shroud
525 19.96 399 / 18.74
476 15.71 123 / 4.84 83.4 / 187
84.2 184
LHDS50X380-6R
LHDS50X380-3L Worn Corner
Corner Shroud
Shroud 507 / 19.96 399
450 / 15.71
17.72 123 / 4.84 83.4 //184
110.1 244
Corner
Corner Castings
Shrouds C
LHDS50X380-3R Corner Shroud 507 / 19.96 450 / 17.72 123 / 4.84 110.1 / 244
PaRT
PaRT iD
LHDS50X380-6L
iD DeSCRiPTiOn
Worn Corner Shroud
DeSCRiPTiOn 507 /a a19.96 399 /B B15.71 123 CC/ 4.84 EST./ WT.
83.4
EST. WT.
184
Corner Castings
LHDC50-2L
LHDS50X380-3L Corner
Corner Casting
Shroud 275
507 // 10.82
19.96 537
450 // 21.14
17.72 341
123 //13.41
4.84 121 / /267
110.1 244 B
LHDS50X380-6R Worn Corner Shroud 507 / 19.96 399 / 15.71 123 / 4.84 83.4 / 184 A
LHDC50-2R
LHDS50X380-3R
PaRT iD Corner
Corner Casting
Shroud
DeSCRiPTiOn 275
507 //a10.82
19.96 537
450 //B21.14
17.72 34
123/ C13.41
/ 4.84 121 / /WT.
EST.
110.1 267
244
LHDS50X380-6L
LHDC50-2L Worn Corner
Corner Shroud
Casting 507 / 10.82
275 19.96 399 / 21.14
537 15.71 123//13.41
341 4.84 83.4
121 // 267
184
LHDC50-2R
Bosses
Corner Castings Corner Casting 275 / 10.82 537 / 21.14 34 / 13.41 121 / 267
LHDS50X380-6R Worn Corner Shroud 507 / 19.96 399 / 15.71 123 / 4.84 83.4 / 184
BossesPaRT iD
LHDC50-2L DeSCRiPTiOn
Corner Casting WiDTH
275 / 10.82 DePTH
537 / 21.14 HeigHT
341 / 13.41 EST.
121 / WT.267
Corner
Cast Castings
Corners
LHDC50-2R Corner Casting mm
275 / in
/a10.82 mm
537 / in
/B21.14 mm
34 /C / in
13.41 kg // 267
121 lb
LHDB50X250-3
PaRT iD Boss
DeSCRiPTiOn 290 /
WiDTHa11.41 347 /
DePTH B13.66 98 / C
HeigHT3.85 16.3 /WT.
EST. 36
LHDB50X300-3
LHDC50-2L Boss
Corner Casting 340
275
mm // 13.39
10.82
/ in 347
537
mm // 13.66
21.14
/ in 98
341
mm // 3.85
13.41
/ in 18.6
kg ///267
121 41
lb
Bosses
LHDPN50-3B
LHDC50-2R
LHDB50X250-3 Pin Assembly
Corner Casting
Boss 74 // 2.91
275
290 10.82
11.41 87 // 13.66
537
347 3.44
21.14 39
98///13.41
34 1.53
3.85 1.1 // /2.4
121
16.3 267
36
a B C C
LHDB50X300-3 Boss 340 / 13.39 347 / 13.66 98 / 3.85 18.6 / 41
LHDPN50-3B
Bosses Pin Assembly 74 / 2.91 87 / 3.44 39 / 1.53 1.1 / 2.4
mm / in mm / in mm / in kg / lb
LHDB50X250-3 Boss 290 /a11.41 347 /B13.66 98 /C3.85 16.3 / 36 B A
LHDB50X300-3
PaRT iD Boss
DeSCRiPTiOn 340 / 13.39
WiDTH 347 / 13.66
DePTH 98 / 3.85
HeigHT 18.6 /WT.
EST. 41
LHDPN50-3B Pin Assembly 74
mm2.91
/ / in 87
mm / 3.44
/ in 39
mm1.53
/ / in 1.1 / 2.4
kg / lb
LHDB50X250-3 Boss 290 / 11.41 347 / 13.66 98 / 3.85 16.3 / 36
LHDB50X300-3 Boss 340 / 13.39 347 / 13.66 98 / 3.85 18.6 / 41
LHDPN50-3B Pin Assembly 74 / 2.91 87 / 3.44 39 / 1.53 1.1 / 2.4

ESCO Wheel Loader Buckets
®
TABLE OF CONTENTS
The wheel loader buckets are available with straight or spade Loadmaster , LHD continuous edge, or
®
bolt-on segment lip designs and range in capacity from 5 through 50 cubic yards.
Quotation Requests
Wheel loader buckets for today’s mining machines are specialized attachments that are quoted to meet the
varying needs of each customer’s application and machine. For a quotation contact your ESCO Sales
Representative.
Infinity® overlay or
ESCO AR plate liner
kits are optional
See-through
rock spill guard
Loadmaster® lip with

Toplok® shrouds and
SV2® or Ultralok®
tooth systems
Toplok wing
shrouds

ESCO Mining Hydraulic Face Shovel Fronts
ESCO offers replacement fronts for large hydraulic face shovel machines. These tough replacement fronts
offer all the design features and metallurgical expertise that have become hallmarks of all ESCO mining
products.
Quotation Requests
HFS fronts buckets for today’s mining machines are specialized attachments that are quoted to meet the
Representative.
Kwik-Lok® II Cast alloy

wear runners hinge
Toplok® wing
shrouds
Cast alloy
corners
Loadmaster® lip with

Toplok shrouds and
SV2® or Posilok® Plus
tooth systems

ESCO Mining Hoe Buckets
The ESCO mining hoe buckets are specifically designed to deliver the production you need in your
particular mining application. Whether you are loading loose material, stripping out overburden from the
seam, top loading, or mass excavating rocky material, these buckets provide reliable performance needed
to get the job done!
Available capacities range from 6.5 to 45 cubic yards. Listed below are some of the many features and
options that make the ESCO mining hoe bucket the one for your application.
Quotation Requests
Hoe buckets for today’s mining machines are specialized attachments that are quoted to meet the
Representative.
Corner gussets
Formed beam
ESCO AR plate or
Infinity overlay wear strips
Toplok® wing
shrouds
Infinity™ wear
buttons
Toplok® lip
shrouds
Corner wear
shoes Posilok® Plus, SV2®, or
Cast corners Ultralok® tooth system

Mining Hoe Buckets TABLE OF CONTENTS
HDPM Mining Hoe Bucket

The ESCO HDPM bucket was specifically created for tough mining applications but is an economically
viable product that reduces customer investment without sacrificing performance. The single beam
configuration is reinforced with unique interior gussets and longer lug plates that provide optimum strength
and rigidity to eliminate deformation in demanding mining applications. Corner gussets reduce the stress
in the transition area from the beam to the side stiffener. The result is a bucket that provides excellent
performance in most mining applications.
Single beam
for the HDPM
Interior
gusset
Connection
Single beam
Bottom plate
Side
stiffener
plate
Corner
gusset
Side plate
Plate or cast lip

Wing shroud

XDPM Mining Hoe Bucket

The XDPM bucket is a dual beam configuration that is designed for the toughest mining applications. This
extra heavy duty bucket design has been used for years and is a proven performer in mines and quarries
around the world. The XDPM bucket is the best choice in severe applications with extreme impact and
abrasion.
The XDPM bucket comes standard with a runner plate, side wear plates, and corner wear shoes. Complete
wear protection options are also available to ensure maximum life and productivity. Customers can order
the best protection options to ensure maximum life and productivity in their application.
Dual beam
for the XDPM
Connection
Front beam
Runner plate includes gusset and
Rear beam wrapper plate
Side
stiffener
plate
Side plate
Side wear
plate
Corner wear
shoe
Bottom plate
Plate or cast lip
Wing shroud

HDPM and XDPM Bucket Wear Options

Complete wear protection options are available for the HDPM and XDPM buckets. Packages are provided
for five key areas of the bucket. The areas are the corner side plates, bottom, inside bottom and inside side
plate. All options are available on both the HDPM and XDPM buckets.
Corner Wear Package
Shown on HDPM Bucket – Also Available on XDPM
Option 1.1 Option 1.2

Cast Corner Wear Shoes Kwik-Lok II Runner
(Standard on XDPM)
Cast Corner Wear Shoes Kwik-Lok® II Runners
Side Plate Wear Package

Option 2.1 Option 2.2 Option 2.3

Side Wear Plate Side Wear Plate Strips Infinity® CWI Buttons
(Standard on XDPM)
AR Plate Infinity CWI Buttons
Bottom Wear Package

Option 3.1 Option 3.2 Option 3.3 Option 3.4

Full Bottom Plate Vertical Strips Horizontal Strips Kwik-Lok II Runners
(Standard on XDPM)
AR Plate Kwik-Lok II Runners

HDPM and XDPM Bucket Wear Options

Inside Bottom Wear Package

Inside Bottom Strips (min) Inside Bottom Strips (max) Inside Bottom Plate (min) Inside Bottom Plate (max)
AR Plate or AR Plate or
Infinity® Overlay Plate Strips Infinity Overlay Plate
Inside Side Plate Wear Package


Inside Side Strips (min) Inside Side Strips (max) Inside Side Plate (min) Inside Side Plate (max)
AR Plate or AR Plate or
Infinity Overlay Plate Strips Infinity Overlay Plate

ESCO Construction Excavator Buckets TABLE OF CONTENTS
Note: Refer to ESCO Attachments Price Book for additional

information, P7000ATT (US) and P7001ATT (CAN).
Standard-duty Plate Lip Bucket Heavy-duty Plate Lip Bucket

Model STDP Model HDP
Designed for general purpose excavating in Equivalent to most manufacturer’s rock buckets.
loam or clay. Also a good performer in bailing Excellent for use in excavating dense clay or
and top-loading operations. earth mixed with sand or light rock conditions.
Extreme-duty Plate Lip Bucket

Model XDP
Designed for excavating in moderate to heavy

abrasion applications such as shot rock, stratified
material, and other abrasive conditions.
Integral Pin Bucket Special Heavy-duty Cast Lip Bucket

Model SHDC
The integral pin bucket system uses ESCO's A massive bucket designed to penetrate
hydraulic coupler. The unique design incorporates the most extreme surfaces such as unshot
the attachment pins into the bucket beam to rock, coral, lava and glacial till. This bucket is
maintain maximum break out force with all the also the best choice where severe prying or
advantages of a hydraulic coupler. chopping is required.
ESCO Construction Hydraulic Coupler Attachment Guide TABLE OF CONTENTS
PosiGrab® Hydraulic Coupler
Posigrab™ Coupler Selector guide

All coupler models within each range will pickup attachments for all machines listed within that same range.
Stock Machine Make/Model Pin to Pin Pin Diameter Breakout Force approximate Wt.
item (mm / in.) (mm / in.) (kg / lbs.) (kg / lbs.)
eSCO Posigrab 7 Ton Class
JCB JZ70 300 / 11.81 50 / 1.97 5,714 / 12,570
Case CX75SR (9007B) 300 / 11.81 50 / 1.97 5,659 / 12,450
Link-Belt 75/80 SA (1600Q) 300 / 11.81 50 / 1.97 5,714 / 12,570
Hitachi EX-ZX80/85-5 310 / 12.20 50 / 1.97 5,100 / 11,220
John Deere 85D/80/75C 310 / 12.20 50 / 1.97 5,100 / 11,220 126 / 278
Komatsu PC60/75MR-US-UU/78MR-US/88-8 312 / 12.28 50 / 1.97 4,809 / 10,580
Komatsu PC80-3/95-1/95R-2 312 / 12.28 50 / 1.97 7,306 / 16,074
Kobelco SK/60IV/70SR/80CS 298 / 11.73 50 / 1.97 5,410 / 11,903
Sany SY75C 298-312 / 11.73-12.28 50 / 1.97 5,722 / 12,589
X JCB JS130/145/JZ140 385 / 15.16 65 / 2.56 8,350 / 18,370
X Case CX130-B/135MSR/145 (9010B) 385 / 15.16 65 / 2.56 9,273 / 20,400
X Link-Belt 130/135/145 X2/3-LX-SA (2650Q) 385 / 15.16 65 / 2.56 9,205 / 20,250
X Hitachi EX-ZX100-2/110-5/120-5/135 362 / 14.25 65 / 2.56 8,000 / 17,600
X John Deere 120C-D/135CRTS (490E) 362 / 14.25 65 / 2.56 8,927 / 19,640
X Komatsu PC100/120/128US-UU/130/138/158 375 / 14.76 60 / 2.36 9,091 / 20,000 257 / 565
X Volvo EC140/ECR145 380 / 14.96 65 / 2.56 8,918 / 19,620
Kobelco SK115/130IV/135SR/140SR/ED150 380 / 14.96 65 / 2.56 8,017 / 17,637
Sany SY135C 420 / 16.54 65 / 2.56 8,640 / 19,007
Sany SY135C 348-425 / 13.70-16.70 65 / 2.56 9,473 / 20,840
New Holland EC130-LC 350 / 13.78 60 / 2.36 9,197 / 20,233
New Holland EC160-LC 374 / 14.72 60 / 2.36 11,955 / 26,300
X JCB JS160/180/190 435 / 17.13 80 / 3.15 10,740 / 23,628
X Case CX160-B (9010B) 435 / 17.13 80 / 3.15 10,782 / 23,720
X Link-Belt 160 X2-LX (2700Q) 435 / 17.13 80 / 3.15 11,191 / 24,620
X Hitachi EX-ZX160 401 / 15.79 80 / 3.15 9,223 / 20,290
X John Deere 160C-D (590D) 391 / 15.39 80 / 3.15 10,168 / 22,370
X Komatsu PC150/160/180-3/8/PW170-5 401 / 15.79 70 / 2.76 12,566 / 27,646 385 / 846
X Volvo EC160 B/C 423 / 16.65 70 / 2.76 10,405 / 22,890
X Volvo EW 160 /180B 465 / 18.31 80 / 3.15 11,523 / 25,350
New Holland EC215-LC 450 / 17.72 70 / 2.76 12,978 / 28,551
Hyundai R160LC-3 410 / 16.14 70 / 2.76 10,082 / 22,180
Kobelco SK1501V/160/170-ED180/190/195 441 / 17.36 70 / 2.76 10,000 / 22,000
Continued
Continued on the next page.on next page.

X JCB JS200/220/JZ235 450 / 17.72 80 / 3.15 13,632 / 29,990
34 –X P7000MIN01L
Case CX210-B/225/235C
– Hydraulic SR Products (July 1, 2013)
(9030B)
Machine 450 / 17.72 80 / 3.15 12,841 / 28,250 www.escocorp.com
Hyundai R160LC-3 410 / 16.14 70 / 2.76 10,082 / 22,180
Kobelco SK1501V/160/170-ED180/190/195 441 / 17.36 70 / 2.76 10,000 / 22,000
ESCO Hydraulic Coupler Selector Guide

® Continued
TABLE on next page.
OF CONTENTS

All coupler models within each range will pickup attachments for all machines listed within that same range.
X JCB JS200/220/JZ235 450 / 17.72 80 / 3.15 13,632 / 29,990
X Case CX210-B/225/235C SR (9030B) 450 / 17.72 80 / 3.15 12,841 / 28,250
X Hitachi EX-ZX180/200/225 472 / 18.58 80 / 3.15 13,227 / 29,100
X John Deere 180/210G/200C-D/225CRTS (690E) 472 / 18.58 80 / 3.15 13,823 / 30,410 418 / 919
X Komatsu PC200/210/228US/PW210/PW220 444-458 / 17.48-18.03 80 / 3.15 15,784 / 34,725
X Volvo EC210B/C/EW230 467 / 18.39 80 / 3.15 13,332 / 29,330
Kobelco SK200IV/210LC/215/235SR 442 / 17.40 80 / 3.15 13,636 / 30,000
Hyundai R240LC-3, R290LC-3 510 / 20.08 80 / 3.15 17,236 / 37,920
Sany SY215C 380-525 / 14.96-20.67 80 / 3.15 14,127 / 31,080
X JCB JS240/260 460 / 18.11 90 / 3.54 18,370 / 40,414
X CX240/250/290/300-B/C (9040/9045B) 490 / 19.29 90 / 3.54 15,432 / 33,950
X Link-Belt 240/250/290/300 X2/3-LX (3400/3900Q) 460 / 18.11 90 / 3.54 16,193 / 35,625
X Hitachi EX/ZX/230/240/250/270/290-3/5 475 / 18.70 90 / 3.54 17,045 / 37,500
X John Deere 230/240/250/270/290 (790E) 475 / 18.70 90 / 3.54 17,045 / 37,500
X Komatsu PC220/240/250/270/290-3/10 444-458 / 17.48-18.03 80 / 3.15 15,784 / 34,725
X Volvo EC240/250 B,C,D 506 / 19.92 90 / 3.54 16,036 / 35,280 605 / 1330
X Volvo EC300D/290B/C/ECR305 495 / 19.49 90 / 3.54 17,641 / 38,810
New Holland EC240-LC, EC270-LC 465 / 18.31 90 / 3.54 16,860 / 37,093
Kobelco SK220IV/250/260/270LC 514 / 20.24 90 / 3.54 16,250 / 35,750
Kobelco SK290/295 527 / 20.75 90 / 3.54 18,812 / 41,387
Hyundai R240LC-3, R290LC-3 510 / 20.08 80 / 3.15 17,236 / 37,920
Sany SY235C 428-532 / 16.85-20.94 80 / 3.15 17,882 / 39,340
JCB JS290/330/360 565 / 22.24 90 / 3.54 19,545 / 43,000
X CASE CX330/350B 535 / 21.06 90 / 3.54 22,455 / 49,400
X Link-Belt 330/350 X2/3-LX 535 / 21.06 90 / 3.54 22,455 / 49,400
X Hitachi EX/ZX300/330/350/370-3/5 585 / 23.03 100 / 3.94 24,273 / 53,400
X John Deere 330/350/370 (892E) 585 / 23.03 100 / 3.94 21,918 / 48,220
X Komatsu PC300/350/360/390-3/10 514 / 20.24 90 / 3.54 20,441 / 44,970 765 / 1683
X Volvo EC330B, EC340, EC360B, EC380/D These Volvo machines utilize 40T couplers, refer to the 40T class
New Holland EC350-LC 500 / 19.69 100 / 3.94 21,968 / 48,330
Kobelco SK300/330/350 534 / 21.02 90 / 3.54 22,227 / 48,900
Hyundai R320LC-3, R360LC-3 550 / 21.65 100 / 3.94 21,955 / 48,300
Sany SY335C 485-590 / 19.09-23.23 90/80 / 3.54/3.15 22,481 / 49,458
X JCB JS460 570 / 22.44 100 / 3.94 25,100 / 55,220
X CASE CX470B/460 (9060B) 570 / 22.44 100 / 3.94 24,575 / 54,065
X Link-Belt 460/470 X2/3-LX (5800Q) 570 / 22.44 100 / 3.94 25,241 / 55,530
X Hitachi EX/ZX400/450/470/520-5 572 / 22.52 110 / 4.33 23,864 / 52,500
X John Deere 450/470 (992E) 572 / 22.52 110 / 4.33 24,091 / 53,000 1129 / 2484
X Komatsu PC400/450/490-3/10 537 / 21.14 100 / 3.94 22,950 / 50,490
X Volvo EC330B, EC340, EC360B, EC380/D 570 / 22.44 110/100 / 4.33/3.94 21,450 / 47,190
X Volvo 480D/460B/C 570 / 22.44 110/100 / 4.33/3.95 24,955 / 54,900
Kobelco SK400LC-IV 608 / 23.94 100 / 3.94 25,000 / 55,000
Kobelco SK480LC 630 / 24.80 100 / 3.94 26,136 / 57,500

Tool Box Rippers TABLE OF CONTENTS
TBRs & Ripper Attachments
Tool Box Rippers assemblies Replacement Shanks for Tool Box Rippers
estimated Wt. estimated Overall
Ripper attachment Size Break Out Force (kg / lbs.) Ripper attachment Wt. Length Width
U35TBR 23,000 lbs or less 72 / 159 Size (kg / lbs.) ( mm / in.) ( mm / in
U40TBR 30,000 lbs or less 127 / 280 U35 w/Fabricated Shank 56 / 123 864 / 34.00 126 / 4.9
U55TBR 45,000 lbs or less 222 / 490 U40 w/ Fabricated Shank 57 / 126 871 / 34.29 126 / 4.9
65SV2TBR 71,000 lbs or less 522 / 1150 U60 w/ Fabricated Shank 196 / 431 1412 / 55.57 175 / 6.8
70SV2TBR 88,000 lbs or less 744 / 1640 65SV2 w/ Fabricated Shank 51 / 112 874 / 34.42 127 / 5.0
70SV2 w/Fabricated Shank 109 / 240 1168 / 45.96 151 / 5.9
Ripper attachments
TBRs & Ripper Attachments
Machine Wt. Ripper attachment estimated Wt.
Replacement
Replacement(kg /Shanks
Shanks forBox
lbs.)for Tool Toolbox
RippersRippers
Size (kg / lbs.)
Wt. 6,804-9,072 / 15,000-20,000 estimated Overall
U25 166 / 365 number Hole Top to CL CL of 1st Hole
) Ripper attachment Wt. Length Width Thickness of Diameter of 1st Hole to CL of 2nd Hole
9,072-18,144 / 20,000-40,000 U35 231 / 510
Size (kg / lbs.) ( mm / in.) ( mm / in.) ( mm / in.) holes ( mm / in.) ( mm / in.) ( mm / in.)
18,144-22,680 / 40,000-50,000 U40 451 / 995
U35 w/Fabricated Shank 56 / 123 864 / 34.00 126 / 4.94 60 / 2.38 2 48 / 1.88 51 / 2.00 127 / 5.00
22,680-38,555 / 50,000-85,000
U40 w/ Fabricated Shank 57 / 126 U55/ 34.29
871 635 / 1400
126 / 4.94 60 / 2.38 2 48 / 1.88 TBRs
51 / 2.00 127 / 5.00
& Ripper Attachments
U55 w/ Fabricated Shank
38,555-46,266
Tool Box Rippers/ 85,000-102,000
assemblies
110 / 243 1136
U60/ 44.72 151 /771
5.94/ 1700
75 / 2.94 Replacement
2 54Shanks
/ 2.12 for
114 / 4.50 152 / 6.00
Tool Box Rippers
0 U60 w/ Fabricated
46,266-67,585 Shank 196 / 431 1412
/ 102,000-149,000 65SV2 / 55.57 175estimated
/ 6.88/ 2540
1152 99 / 3.88
Wt.
2 54 / 2.12 216 / 8.50 432 / 17.00
estimated Overall
0 65SV2 w/ Fabricated Shank
Ripper attachment Size 51 / 112 874 / 34.42
Break Out Force 127 / (kg / lbs.) 2.50
5.00 64 / 2Ripper46 / 1.81 51 / 2.00 Wt. 127 / 5.00
attachment Length Width
67,585-83,461/ 149,000-184,000 70SV2 1440 / 3175
70SV2 w/Fabricated
U35TBRShank 109 / 240 1168
23,000 lbs/ or
45.96
less 151 / 5.94
72 / 15975 / 2.94 2 52 / 2.06
Size 114 / 4.50(kg / lbs.)152 /(6.00
mm / in.) ( mm / in
U40TBR 30,000 lbs or less 127 / 280 U35 w/Fabricated Shank 56 / 123 864 / 34.00 126 / 4.9
Wt.
65SV2TBR 71,000 lbs or less 522 / 1150 U60 w/ Fabricated Shank 196 / 431 1412 / 55.57 175 / 6.8
)
70SV2TBR 88,000 lbs or less 744 / 1640 65SV2 w/ Fabricated Shank 51 / 112 874 / 34.42 127 / 5.0
70SV2 w/Fabricated Shank 109 / 240 1168 / 45.96 151 / 5.9
Ripper Attachments
Ripper attachments
Machine Wt. Ripper attachment estimated Wt.
0 (kg / lbs.) Size (kg / lbs.)
6,804-9,072 / 15,000-20,000 U25 166 / 365
0
9,072-18,144 / 20,000-40,000 U35 231 / 510
0
18,144-22,680 / 40,000-50,000 U40 451 / 995
5
22,680-38,555 / 50,000-85,000 U55 635 / 1400
38,555-46,266 / 85,000-102,000 U60 771 / 1700
46,266-67,585 / 102,000-149,000 65SV2 1152 / 2540
67,585-83,461/ 149,000-184,000 70SV2 1440 / 3175

ESCO Shrouds & Sidecutters TABLE OF CONTENTS
Shroud and Sidecutter Bolt Patterns by Machine Make and Model

Heavy-duty Plate Lip Buckets
Machine Make 4 Bolt Holes 5 Bolt Holes 6 Bolt Holes 8 Bolt Holes
CASE CX130, CX160, CX210 CX240, CX290 CX330, CX460 N/A
215D, EL200B, 311B, 312B, 225D, EL240B, EL300B, 235D, EL450B, 245D, H/J Family,
CAT
315B, B/S Family C/D Family D/E/F/G Family 365 V/W
DAEWOO 130LC-V, 220LC-V 250LC-V, 290LC-V 400LC, 450 N/A
JCB JS130, JS160, JS220 JS260 JS330, JS450 N/A
ZX110, ZX120, EX160, EX550, EX750,
HITACHI EX230, ZX270 ZX330, ZX370, ZX450
ZX200 EX1100
R130LC, R160LC, R180LC, R320LC, R360LC,
HYUNDAI R250LC, R290LC N/A
R210LC R450LC
JOHN DEERE JD120, JD160, JD200 JD230, JD270 JD330, JD370, JD450 JD550, JD750
SK115SR, SK135SR, 235SR, SK250LC,

KOBELCO SK330LC, SK400 N/A
SK150LC, ED180, SK210LC SK290LC
PC95SR, PC128UU, PC120,
PC600, PC750,
KOMATSU PC128US, PC160 PC200, PC220, PC228,PC270 PC300, PC400
PC1100
PC210
R952 LT, R954 LT
LIEBHERR R912 LT, R932 LT R942 LT R974 LT
R962/972 LT
130LX, 160LX, 210LX,
LINKBELT 240LX, 290LX 330LX, 460LX N/A
130SA, 225SA
EC130LC, EC160LC,
NEW HOLLAND EC240LC, EC270LC EC350LC, EC450LC EC600
EC215LC
VOLVO EC140, EC160, EC210 EC240, EC290 EC360, EC460 N/A
Bolt-on Shroud Weld-on Weld-on

Type A or E Shroud Type I Shroud Type II
Acceptable Bolt Pattern by Shroud Pattern No.

Pattern no. Shroud Type 4 Bolt Holes 5 Bolt Holes 6 Bolt Holes 8 Bolt Holes
4197865 A X X X
4197850 A X X X
PDE31336 E X
*Effective for ESCO heavy-duty plate lip buckets beginning with serial number RH43000
and for all ESCO cast lip buckets. An asterisk (*) indicates shrouds/sidecutters that are accept-
able for use on ESCO heavy-duty plate lip buckets produced prior to serial number RH43000 and
for all ESCO standard duty plate lip buckets. Machine models should be used as a guideline only,
as some special application buckets have varying number of bolt holes.
Wear Shroud Specifications

Wear Shroud Specifications
eSCO Shroud Weight / Pair Qty. per a B
Pattern no. Type (kg / lbs.) Bucket (mm / in.) (mm / in.)
PDE31336 E 46 / 102 2 164 / 6.44 183 / 7.19
4197850 A 36 / 80 2 100 / 3.95 152 / 5.97
4197865 A 16 / 36 2 100 / 3.95 152 / 5.97
PDE32215 Weld-on Type I 88 / 193 2 NA NA
PDD31744 Weld-on Type II 4/9 2 NA NA
Note: Shrouds provide no additional sidecut.
Sidecutter Bucket Protection TABLE OF CONTENTS
Bolt-on Sidecutters are available in several design

options for maximum versatility. Match the sidecutter
to your digging requirements. Sidecutters cut extra
clearance.
Type C Type A Type D Type E
Acceptable Bolt Pattern by Sidecutter Pattern No.

Pattern no. additional Cut*
(LH/RH) (mm / ins.) 4 Bolt Holes 5 Bolt Holes 6 Bolt Holes 8 Bolt Holes
CE17748L / R3* 76 / 3.00 X X X
CE17748L / R4* 101 / 4.00 X X X
T2143A / T2144A 51 / 2.00 X
T2145A / T2146A 76 / 3.00 X
T1154C / T1155C 101 / 4.00 X
T1100A / T1101A 127 / 5.00 X
T1156A / T1157A 152 / 6.00 X
T1089A / T1090A 178 / 7.00 X
T1119A / T1120A 203 / 8.00 X
T1143A / T1144A 229 / 9.00 X
T1154B / T1155B 101 / 4.00 X X
T1100B / T1101B 127 / 5.00 X X
T1156B / T1157B 152 / 6.00 X X
T1089B / T1090B 178 / 7.00 X X
T1407 / T1408 127 / 5.00 X
T1349 / T1350 178 / 7.00 X
*Effective for ESCO heavy-duty plate lip buckets beginning with serial number RH43000 and for all ESCO cast lip
*Effective for ESCO heavy-duty plate lip buckets beginning with serial number RH43000 and for all ESCO cast lip buckets. An "X"
buckets. An asterisk (*) indicates
indicates shrouds/sidecutters shrouds/sidecutters
that are acceptable for use on ESCOthatheavy-duty
are acceptable for useprior
plate lip buckets on ESCO
to serial heavy-duty plateand
number RH43000 lip buckets
produced prior to serial number RH43000 and for all ESCO standard duty plate lip buckets. Machine models should
for all ESCO standard duty plate lip buckets. Machine models should be used as a guideline only, as some special application buckets be
used as a guideline only, as some
have a varying number of bolt holes. special application buckets have varying number of bolt holes.
Sidecutter Specifications
Sidecutter Specifications
Bolt eSCO additional Wt. per Plowbolts
Pattern Pattern a1 a2 B1 B2 C1 C2 Cut Pair & Qty.
Type number (mm / in.) (mm / in.) (mm / in.) (mm / in.) (mm / in.) (mm / in.) (mm / in.) (kg / lbs.) (in.)
C T1154B / 1155B 117 / 4.62 117 / 4.62 NA NA NA NA 102 / 4.00 24 / 54 (3) 7/8 x 3
C T1100B / 1101B 117 / 4.62 117 / 4.62 NA NA NA NA 127 / 5.00 30 / 66 (3) 7/8 x 3
C T1156B / 1157B 117 / 4.62 117 / 4.62 NA NA NA NA 152 / 6.00 26 / 58 (3) 7/8 x 3
C T1089B / 1090B 117 / 4.62 117 / 4.62 NA NA NA NA 178 / 7.00 29 / 64 (3) 7/8 x 3
A CE17748-L3 / R3 117 / 4.62 NA 136 / 5.37 NA 152 / 6.00 NA 76 / 3.00 34 / 76 (3) 7/8 x 3
A CE17748-L4 / R4 117 / 4.62 NA 136 / 5.37 NA 152 / 6.00 NA 102 / 4.00 41 / 90 (3) 7/8 x 3
D T2143A / 2144A 114 / 4.50 117 / 4.62 108 / 4.25 127 / 5.00 89 / 3.50 152 / 6.00 51 / 2.00 44 / 96 (6) 7/8 x 2.5
D T2145A / 2146A 114 / 4.50 117 / 4.62 108 / 4.25 127 / 5.00 89 / 3.50 152 / 6.00 76 / 3.00 51 / 112 (6) 7/8 x 2.5
D T1154C / 1155C 114 / 4.50 117 / 4.62 108 / 4.25 127 / 5.00 89 / 3.50 152 / 6.00 102 / 4.00 66 / 145 (6) 7/8 x 3
D T1100A / 1101A 114 / 4.50 117 / 4.62 108 / 4.25 127 / 5.00 89 / 3.50 152 / 6.00 127 / 5.00 61 / 134 (6) 7/8 x 3
D T1156A / 1157A 114 / 4.50 117 / 4.62 108 / 4.25 127 / 5.00 89 / 3.50 152 / 6.00 152 / 6.00 61 / 134 (6) 7/8 x 3
D T1089A / 1090A 114 / 4.50 117 / 4.62 108 / 4.25 127 / 5.00 89 / 3.50 152 / 6.00 178 / 7.00 64 / 140 (6) 7/8 x 3
D T1119A / 1120A 114 / 4.50 117 / 4.62 108 / 4.25 127 / 5.00 89 / 3.50 152 / 6.00 203 / 8.00 64 / 140 (6) 7/8 x 3
D T1143A / 1144A 114 / 4.50 117 / 4.62 108 / 4.25 127 / 5.00 89 / 3.50 152 / 6.00 229 / 9.00 67 / 148 (6) 7/8 x 3
E T1407 / 1408 92 / 3.62 99 / 3.88 136 / 5.37 136 / 5.37 108 / 4.25 76 / 3.00 127 / 5.00 104 / 230 (8) 7/8 x 4
E T1349 / T1350 92 / 3.62 99 / 3.88 136 / 5.37 136 / 5.37 108 / 4.25 76 / 3.00 178 / 7.00 100 / 220 (8) 7/8 x 4
Note: A sidecutter that produces an additional cut of 100mm/4.00in. or more is not recommended on an ESCO STDP bucket.
Note: Sidecutters that produce an additional cut of 100mm/4.00in. or more are not recommended for ESCO STDP buckets.
ESCO Construction Thumb and Hydraulic Kit Specifications TABLE OF CONTENTS
The ESCO Thumb package offers you a choice of products to handle all your material retention needs and make your
®
excavator even more productive.
Universal Rigid Thumb:

• High grade T-1 steel used in critical components
• Three working positions for more versatility
• Integrated design stores in one unit
• Independent thumb has three or four tines with center tines recessed to cradle objects for a better grip
• Adjustment is accomplished by moving a single pin, reducing downtime
Hydraulic Thumb:
Non-linkage style – the hydraulic cylinder is pinned directly to the thumb. Thumb rotation is 120°.
Linkage style – the progressive linkage between the cylinder and thumb gives the ESCO hydraulic thumb
more complete rotation, up to 180°.
• Heavy gussets and reinforcements
• Serrated teeth with webbing gives more gripping action to hold material
• Large diameter pins and bushings give longer wear life
• Thumbs are matched to bucket so no worry of interference
• Heavy-duty stops also protect cylinders from damage
• High-grade T-1 steel is used in critical components to make thumb stronger and longer lasting

ESCO Rigid Thumb Selector Guide
Thumb
Universal Rigid Thumbs Thumb Thumb exact Fit
Thumb estimated Wt. Length Width Bucket Widths
Machine Weight Classes Model (kg / lbs.) (mm / in.) (mm / in.) (mm / in.)
Machines from 20,000 to 30,000lbs. RC3/4 - 4 Tine 319 / 702 1257 / 49.50 699 / 27.50 914 / 36.00
Machines from 20,000 to 30,000lbs. RC3/4 - 4 Tine/ Coupler 332 / 730 1457 / 57.37 699 / 27.50 914 / 36.00
Machines from 31,000 to 65,000lbs. RC5/6/7 - 3 Tine 396 / 871 1448 / 57.00 508 / 20.00 762 / 30.00
Machines from 31,000 to 65,000lbs. RC5/6/7 - 3 Tine/Coupler 442 / 972 1753 / 69.00 508 / 20.00 762 / 30.00
Machines from 31,000 to 65,000lbs. RC5/6/7 - 4 Tine 438 / 963 1448 / 57.00 800 / 31.50 1067 & 1219 / 42 & 48
Machines from 31,000 to 65,000lbs. RC5/6/7 - 4 Tine/Coupler 483 / 1063 1753 / 69.00 800 / 31.50 1067 & 1219 / 42 & 48
Machines from 66,000 to 102,000lbs RC8/9 - 3 Tine 670 / 1473 1715 / 67.50 559 / 22.00 1372 & 1524 / 54 & 60
Machines from 66,000 to 102,000lbs RC8/9 - 4 Tine 699 / 1538 1715 / 67.50 800 / 31.50 1067 / 42.00
Machines from 66,000 to 102,000lbs RC8/9 - 4 Tine/ Coupler 767 / 1687 2039 / 80.27 800 / 31.50 1067 / 42.00
ESCO
ESCO Hydraulic
Hydraulic Thumb
Thumb Selector
Selector Guide Guide
Machine Weight Classes Thumb Style Thumb Sizes
Machines from 15,000 to 100,000 lbs. Hydraulic Non-Link Thumb Made to order for machine model and bucket.
Machines from 15,000 to 100,000 lbs. Hydraulic Non-Link Thumb for Coupler Made to order for machine model, coupler and bucket.
Machines from 15,000 to 100,000 lbs. Hydraulic Link-Style Thumb Made to order for machine model and bucket.
Machines from 15,000 to 100,000 lbs. Hydraulic Link-Style Thumb for Coupler Made to order for machine model, coupler and bucket.
Page 1

ESCO Hydraulic Non-link Thumb
Cylinder Mount Cylinder

Mount Pin Stop
Main Pin
Thumb
Assembly
Lock
Cylinder Rod Pin Right Side View
Mount
Mount Pin
Cylinder
Do not weld
Bushings Main Pin center area
Lock
Cylinder
Rod Pin
Weld to be continuous with no

sudden reduction in section
at end of plate
No weld around
the end of plate
Weld to run out Leg length
in a flat puddle and direction
Left Right Add filler plate

if necessary
Front View

ESCO Hydraulic Progressive Linkage Thumb
ESCO Thumb Parts List

Every ESCO Hydraulic Thumb is shipped with a Parts List. The Parts List is applicable to this specific thumb
model and serial number, only! Please do not remove this Parts List from the Operation & Installation
Manual. Please contact the factory should you require additional copies of the Parts List. Our Customer
Service Representative will require the Model and Serial number.
The Parts List offers information for the installation and assembly of the product as well as the source for
ordering replacement parts.
Cylinder Mount
Cylinder Mount Pin
Cylinder
Cylinder Rod Pin
Pivot Link
Pivot Pin
Stop
Lock
Center Link
Link Pin
Main Pin
Thumb Assembly
Right Side View

ESCO Hydraulic Progressive Linkage Thumb
Cylinder
Mount
Cylinder
Mount Pin
Cylinder
Stop
Anti-Rotate
Block
Right Hand
Pivot Link
Left Hand
Pivot Link
Pivot Pin
Rod Pin
Spacer
Bushings
Main Pin
Center Link
Main Pin Lock
Link Pin
Thumb Assembly
Left Right
Operator's View

TABLE OF CONTENTS
Thumb Quote Form

Thumb Quote Form
Date: _______________ Company Name: ______________________
Contact: _______________ Phone: _______________ Fax: _______________
Information required at time of quote:

Thumb Style (Circle One):
o Pin Mounted Hydraulic Non-link
o Pin Mounted Hydraulic Non-link For Coupler
o Pin Mounted Hydraulic Progressive Link
o Pin Mounted Hydraulic Progressive Link For Coupler
Carrier Make, Model and Series: ______________________________
Stick Length: _______________
Linkage Type (Circle One): Standard Heavy-duty
Standard Paint Color is Black Special Color Request ________________
Bucket Info Required at Time of Order:

Bucket Mfg: _______________ Bucket Serial No.: _______________
Bucket Class: _______________ Bucket Capacity or Profile No.: _______________
Bucket OLW: _______________
Play Adjustment: Yes No
Tooth Size: _______________ Style: _______________ Qty: _______________
Coupler Info Required at Time of Order

Used with Coupler: Yes No
Coupler Mfg: ______________________ Coupler Serial No.: _________________

ESCO Attachment Warranty Policy TABLE OF CONTENTS
ESCO Corporation (ESCO) warrants the excavator bucket, the thumb, and the coupler sold by ESCO, to
be free from proven defects in material and workmanship to the original end-user for one (1) year from the
date of delivery or 1000 hours usage, whichever is sooner. ESCO warrants the hydraulic kit to be free from
proven defects in material and workmanship for ninety (90) days from the date of delivery to the original end
user. For components not manufactured by ESCO, ESCO extends to the end user only the warranties of the
component suppliers.
This warranty is limited to replacement of such parts as shall appear to ESCO upon inspection, at point
of manufacture, to be defective in material or workmanship. This warranty shall not extend to any ESCO
bucket, thumb, coupler, or hydraulic kit that has been improperly applied, abused, improperly installed or
maintained. Defects judged to be caused by improper storage after leaving point of manufacture will not be
warrantable.
This warranty shall not extend to buckets, thumbs, couplers or hydraulic kits which have been altered or
repaired without prior written consent of ESCO. ESCO may require that any part with an alleged defect be
returned to the point of manufacture. A written statement covering any alleged defect must accompany all
such parts ESCO requests to be returned for warranty consideration and such parts must be returned to
ESCO via prepaid freight. Any parts not requested to be returned with a warranty claim must be kept by the
End User for 60 days. ESCO may request return of the parts any time during those 60 days. After the 60
days, the parts may be destroyed. All warranty claims should be submitted within 30 working days from the
date of repair or replacement of defective part. ESCO will not accept claims filed after 90 days from the date
of repair.
ESCO replacement parts will be invoiced by ESCO and will be delivered F.O.B. ESCO’s shipping point.
Credit will be allowed for parts determined by ESCO upon inspection to be defective. ESCO shall not be
responsible for dealer service or mileage costs in connection with the warranty claim.
NO WARRANTY CLAIM WILL BE ACCEPTED WITHOUT A PROPER ESCO WARRANTY CLAIM
NUMBER OBTAINED FROM ESCO PRIOR TO SUBMITTAL OF THE CLAIM.
WEAR PARTS, SUCH AS PINS, BUSHINGS ARE SUBJECT TO NORMAL WEAR AND ARE NOT
CONSIDERED FOR WARRANTY CLAIMS.
DUE TO CONDITIONS BEYOND ESCO’S CONTROL, SUCH AS SYSTEM CONTAMINATION AND
OVERHEATING, HYDRAULIC HOSES AND FITTINGS ARE NOT CONSIDERED FOR WARRANTY.
THE WARRANTY BECOMES VOID IF MAXIMUM HYDRAULIC FLOW AND PRESSURE RATINGS
ARE EXCEEDED FOR THE SPECIFIC MACHINE. FURTHER, DUE TO DIFFERENT MAKES AND
MODELS OF EQUIPMENT, VALVE LOCATION AND HOSE ROUTING MAY VARY. THE DEALER SHALL
BE RESPONSIBLE FOR PROPER HOSE ROUTING AT TIME OF INSTALLATION. ESCO IS NOT
RESPONSIBLE FOR HOSE OR FITTING DAMAGE AFTER INSTALLATION.
Warranty Disclaimer
THIS WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER REPRESENTATIONS AND
WARRANTIES EXPRESSED OR IMPLIED, AND ESCO EXPLICITLY DISCLAIMS AND EXCLUDES
ANY IMPLIED WARRANTY OF MERCHANTABILITY FOR A PARTICULAR PURPOSE. IN NO EVENT
SHALL THE END USER BE ENTITLED TO ANY CONSEQUENTIAL, INCIDENTAL OR CONTINGENT
DAMAGES OF ANY KIND, WHETHER ARISING OUT OF BREACH OF CONTRACT, WARRANTY
(INCLUDING NEGLIGENCE AND STRICT LIABILITY) OR OTHER THEORIES OF LAW, WITH RESPECT
TO PRODUCTS SOLD OR SERVICES RENDERED BY ESCO, OR ANY UNDERTAKINGS, ACTS OR
OMISSIONS RELATING THERETO.
ESCO reserves the right to change these policies as conditions demand.

P7000MIN HMP Digital

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

P7000MIN HMP Digital

Uploaded by

Copyright:

Available Formats

Specifications:

Hydraulic Machine Products

Hydraulic Machine Product Specifications

Bucket Lip and Wing Shrouds.................................................................................................................................HMP 13

Corner Wear Shoes...................................................................................................................................................HMP 16

Multi-Purpose Lip System.......................................................................................................................................HMP 17

Loadmaster® Plate Lip System................................................................................................................................HMP 19

Nemisys Cast Lip System.........................................................................................................................................HMP 22

Load Haul Dump (LHD) Lip Systems.......................................................................................................................HMP 24

ESCO Wheel Loader Buckets..................................................................................................................................HMP 26

ESCO Mining Hydraulic Face Shovel Fronts.........................................................................................................HMP 27

ESCO Mining Hoe Buckets......................................................................................................................................HMP 28

ESCO Construction Excavator Buckets.................................................................................................................HMP 33

ESCO Construction Hydraulic Coupler Attachment Guide..................................................................................HMP 34

ESCO Construction Thumb and Hydraulic Kit Specifications.............................................................................HMP 39

2 – P7000MIN01L – Hydraulic Machine Products (July 1, 2013) www.escocorp.com

Understanding ESCO Numbering System

www.escocorp.com P7000MIN01L – Hydraulic Machine Products (July 1, 2013) – 3

4 – P7000MIN01L – Hydraulic Machine Products (July 1, 2013) www.escocorp.com

www.escocorp.com P7000MIN01L – Hydraulic Machine Products (July 1, 2013) – 5

Lip Shrouds for Spade Lips

MaTing BOSS WeigHT MaTing WeigHT

Tool TAB TAP HPA-ASSY-2 51 / 2.00 76 / 3.00 .8 / 1.7

6 – P7000MIN01L – Hydraulic Machine Products (July 1, 2013) www.escocorp.com

Left & Right-hand Shroud Center Shroud

Wheel Loader Lip Shrouds

www.escocorp.com P7000MIN01L – Hydraulic Machine Products (July 1, 2013) – 7

Left & Right-hand Shroud Center Shroud

Wheel Loader Lip Shrouds

8 – P7000MIN01L – Hydraulic Machine Products (July 1, 2013) www.escocorp.com

Left & Right-hand Shroud Center Shroud

Wheel Loader Lip Shrouds

www.escocorp.com P7000MIN01L – Hydraulic Machine Products (July 1, 2013) – 9

Left & Right-hand Shroud Center Shroud

10 – P7000MIN01L – Hydraulic Machine Products (July 1, 2013) www.escocorp.com

Left & Right-hand Shroud Center Shroud

www.escocorp.com P7000MIN01L – Hydraulic Machine Products (July 1, 2013) – 11

Left & Right-hand Shroud Center Shroud

12 – P7000MIN01L – Hydraulic Machine Products (July 1, 2013) www.escocorp.com

Wheel Loader Face Shovel/Hoe

Type 2 Type 4 Type 5 Type 6

MiniMUM LiP MaXiMUM LiP B C RaMP SPaDe

www.escocorp.com P7000MIN01L – Hydraulic Machine Products (July 1, 2013) – 13

Wheel Loader and Face Shovel

MiniMUM Wing MaXiMUM Wing B C Pin / LOCK

*Requires no base. Designed to fit 100mm/4.00in. plate wing

14 – P7000MIN01L – Hydraulic Machine Products (July 1, 2013) www.escocorp.com

Part OeM Weight Lip Machine

Misc Hyd Mach Shrouds

www.escocorp.com P7000MIN01L – Hydraulic Machine Products (July 1, 2013) – 15

16 – P7000MIN01L – Hydraulic Machine Products (July 1, 2013) www.escocorp.com

Multi-Purpose Lip System

138 = Inside Lip Width (inches)

P= Spade Lip Design, S = Straight Lip Design

U45 = Tooth Style and Size

www.escocorp.com P7000MIN01L – Hydraulic Machine Products (July 1, 2013) – 17

Note: Straight lip shown - also available in spade versions.

• Cast alloy bolt-on shrouds

inside Lip Lip nose

18 – P7000MIN01L – Hydraulic Machine Products (July 1, 2013) www.escocorp.com

Loadmaster Plate Lips

L= Lip with Cast Wings

www.escocorp.com P7000MIN01L – Hydraulic Machine Products (July 1, 2013) – 19