Hattersley Tech_inside_issue4_p1.

qxp_Layout 1 18/01/2017 11:06 Page 33

BALANCING VALVES - STATIC

Cast Iron and Steel Commissioning Valves Coefficients

Fig. M2000
Nom
Size mm 50 65 80 100 125 150 200
Flow Kv 71.91 155.9 217.3 380.2 576.6 830.8 1412
Headloss Factor 0.45 0.4 0.4 0.35 0.35 0.35 0.35
Kvs 48.24 98.58 137.4 224.9 341.1 491.5 835.4

Nom
Size mm 250 300 350 400 450 500 600
Flow Kv 2116 3073 3810 4968 6087 7958 11621
Headloss Factor 0.35 0.35 0.35 0.35 0.35 0.35 0.35
Kvs 1252 1818 2254 2939 3601 4708 6875

Fig. M3000
Nom
Size mm 50 65 80 100 125 150 200 250 300
Flow Kv - 155.9 217.3 380.2 576.6 830.8 1412 2116 3073
Headloss Factor - 0.4 0.4 0.35 0.35 0.35 0.35 0.35 0.35
Kvs - 98.58 137.4 224.9 341.1 491.5 835.4 1252 1818

Fig. MH733
Nom
Size mm 50 65 80 100 125 150 200 250 300
Flow Kv (fully open) - 85 111 146 250 380 600 1211 1521

Fig. MH737
Nom
Size mm 50 65 80 100 125 150 200 250 300
Flow Kv (fully open) - 85 111 146 250 380 600 1211 1521

Fig. 5953G
Nom
Size mm 50 65 80 100 125 150 200 250 300
Headloss Factor 0.45 0.4 0.4 0.35 0.35 0.35 0.35 0.35 0.35
Kvs 48.24 98.58 137.4 224.9 341.1 491.5 835.4 1252 1818

Fig. 5973G
Nom
Size mm 50 65 80 100 125 150 200 250 300
Headloss Factor 0.45 0.4 0.4 0.35 0.35 0.35 0.35 0.35 0.35
Kvs 48.24 98.58 137.4 224.9 341.1 491.5 835.4 1252 1818

Fig. 4983G PN25

Nom
Size mm 50 65 80 100 125 150 200 250 300
Headloss Factor 1.86 0.95 0.50 0.29 0.37 0.43 0.31 0.56 0.33
Kvs 85 204 370 820 982 1353 2923 3374 6350

Every effort has been made to ensure that the information contained in this publication is accurate at the time of publishing.
010316

Hattersley Ltd assumes no responsibility or liability for typographical errors or omissions or for any misinterpretation of the
information within the publication and reserves the right to change without notice.

Technical Helpline: 0845 604 1790

E: tech-enquiries@hattersley.com W: www.hattersley.com
Hattersley Tech_inside_issue4_p1.qxp_Layout 1 18/01/2017 11:06 Page 34

BALANCING VALVES - STATIC

Bronze Commissioning Valves Coefficients

Headloss Factor % The headloss of the DRV is obtained from the graph at the fully
The headloss across a metering station is less than the open position at the particular design flow rate. The total
differential pressure (¢P) signal indicated at the pressure headloss of the metering station and DRV (commissioning set),
tappings as shown on the metering station flow charts. when directly coupled or independently located, is the
The value of headloss for the metering station is shown summation of the two separate values.
as a percentage of the signal in the tables below.

Fig.1000 / Fig.1000S
Nom
Size mm 15 22 28 32 40 50
Flow Kv 2.244 5.4 9.63 21.68 34.38 71.1
Headloss Factor 0.75 0.6 0.6 0.5 0.45 0.45
Kvs 1.943 4.181 7.46 15.33 23.06 47.7
*Fig.1000S refers to DN15 only.

Fig. 1000C Fig. 1000M / 1000SM Fig. 1000L / 1000SLF

Nom Nom Nom
Size mm 15 Size mm 15 Size mm 15
Flow Kv 2.354 Flow Kv 1.101 Flow Kv 0.533
Headloss Factor 0.75 Headloss Factor 0.83 Headloss Factor 0.9
Kvs 2.039 Kvs 1.003 Kvs 0.506

Fig. 1000MC Fig. 1000LC

Nom Nom
Size mm 15 Size mm 15
Flow Kv 1.129 Flow Kv 0.539
Headloss Factor 0.83 Headloss Factor 0.9
Kvs 1.029 Kvs 0.511

Fig. 1432, 1432L, 1432C, 1432LC

Nom
Size in 1/2L 1/2 3/4 1 11/4 11/2 2
1432 Flow Kv (fully open) 2.26 2.14 3.6 6.37 12.3 21.3 31.3
1432L Flow Kv - 2.26 - - - - -
1432C Flow Kv - 2.14 3.6 - - - -
1432LC Flow Kv - 2.26 - - - - -

Fig. 2432, 2432LM, 2432LL

Nom
Size in 1/2 3/4 1 11/4 11/2 2
2432 Flow Kv 1.549 2.995 5.31 10.7 18.11 28.65
2432LM Flow Kv 0.99 - - - - -
2432LL Flow Kv 0.519 - - - - -

Every effort has been made to ensure that the information contained in this publication is accurate at the time of publishing.
270916

Hattersley Ltd assumes no responsibility or liability for typographical errors or omissions or for any misinterpretation of the
information within the publication and reserves the right to change without notice.

Technical Helpline: 0845 604 1790

E: tech-enquiries@hattersley.com W: www.hattersley.com
Hattersley Tech_inside_issue4_p1.qxp_Layout 1 18/01/2017 11:06 Page 35

BALANCING VALVES - STATIC

Bronze Commissioning Valves Coefficients

Fig. 1732, 1732M, 1732L, 1732C, 1732MC, 1732LC

Nom
Size in 1/2 3/4 1 11/4 11/2 2
1732 Flow Kv 1.87 3.14 5.59 10.8 18.1 29.1
1732 Kvs 1.943 4.181 7.46 15.33 23.06 47.7
1732M Flow Kv 1.06 - - - - -
1732M Kvs 1.003 - - - - -
1732L Flow Kv 0.57 - - - - -
1732L Kvs 0.506 - - - - -
1732C Flow Kv 1.87 3.14 - - - -
1732C Kvs 2.037 4.457 - - - -
1732MC Flow Kv 1.06 - - - - -
1732MC Kvs 1.029 - - - - -
1732LC Flow Kv 0.57 - - - - -
1732LC Kvs 0.511 - - - - -

Fig. 1200DR
Nom
Size mm 15 20 25 35 40 50
Flow Kv 4.74 9.96 18.46 26.71 42.15 70.95

Every effort has been made to ensure that the information contained in this publication is accurate at the time of publishing.
081116

Hattersley Ltd assumes no responsibility or liability for typographical errors or omissions or for any misinterpretation of the
information within the publication and reserves the right to change without notice.

Technical Helpline: 0845 604 1790

E: tech-enquiries@hattersley.com W: www.hattersley.com