Module 4 – GEAS ANSWERS

1. What is the standard IF Video Carrier for a cable TV system? 45.75 MHz
2. An engineer is required to finish a certain engineering job in Effective
20 days. He is said to be ____ if he finished the job within
the required period of 20 days.
3. What is a thermodynamic process in which the system In quasiequilibrium
remains infinitesimally closed to an equilibrium state at all
times?
4. What type of mirror that curves outward toward its center Convex mirror
and diverges parallel light as though the reflected light
came from a single virtual focal point behind the mirror?
5. What type of mirror that curves inward its center and Concave mirror
converges parallel light to a single real focal point?
6. Who formulated the atomic theory? John Dalton
7. A radioactive substance does not emit which of the (Proton, Alpha ray, Beta
following? ray, Gamma, ray)
8. What refers to the band of colors produced when sunlight Solar spectrum
passes through a prism?
9. When the white light is passed through a prism, the different (Violet, Red, Orange,
lights are bent varying degrees and are dispersed into Green)
different colors. Which of these colors bends the leas?
10. What is the unit of radioactivity? Becquerel
11. Under what group in the periodic table does the Oxygen Group VIA
family belong?
12. What determines the pitch of a sound? Frequency
13. What is the chief ore of Titanium? Ilmanite
14. The profit derived from a project or business enterprise Economic return
without consideration of obligation to financial contributors
and claims of others based on profit is known as
15. What is measure of the average speed with which accounts Receivable Turnover
receivable are collected?
16. What is the prime time block for AM Radio in Metro Manila? 5am to 9am and 4pm to
8pm
17. According to the TV broadcast standards, what is the 1000kW
maximum effective radiated power in Metro Manila and
Metro Cebu for channels 7-13?
18. When is Electronics and Communications Engineer Standard AM Broadcast
supervision required under Department Order No. 88? with a carrier power of
5kW
19. What law specifically requires the services of a duly D.O. 88
registered Electronics and Communication Engineer in the
designing, installation and construction, operation and
maintenance of radio stations?
20. When was the Electronic Commerce Act of the Philippines 14-Jun-00
approved?
21. What refers to a fundamental obligation under the contract Condition
which goes to the root of the contract?
22. A rule is defined as: A guide for conduct and
action in a certain
situation
23. The solubility of gas in a liquid is directly proportional to the Henry’s Law
partial pressure of the gas above the solution. This is known
as
24. What is the ratio of the number of moles of solute to the Molarity
volume of the solution in liters?
25. What point is where liquid and gases are indistinguishable? Critical point
26. “Working main lines” refers to the: Main telephone lines
27. What refers to a permit issued by the NTC authorizing the Radio communication
holder thereof to engage to the acquisition, servicing, equipment dealer permit
maintenance, purchase or sale of transmitters and or
transceivers, parts and accessories thereof?
28. Which of the following shall be complied by an international A radio telegraph operator
shop pursuant to the global maritime distress and safety
system?
29. What prefix is used in naming isomers? Bi-
30. Polymorphism is demonstrated as Different crystalline
Compiled by:  Pur Yow 
 structures with different
temperatures
31. What are the typical dielectric constants of Class II 500 to 10,000
capacitors?
32. What material is used in making Schottky diodes, light- Gallium Arsenide
emitting diodes, Gunn diodes, and injection lasers?
33. What refers to the product of force and time during which a Impulse
force acts?
34. Work is a/an Signed scalar quantity
35. What is defined as the weight per unit volume? Weight density
36. Which of the following is the lowest resistance grounding on Surface loam soil
earth?
37. “If no net force acts on it, an object at rest will remain at First Law of Motion
rest and an object in motion will remain in motion at
constant velocity?
38. What is true between coefficient of static friction and Coefficient of static
coefficient of kinetic friction? For the same materials in friction is always greater
contact, than coefficient of kinetic
friction
39.Substances are classified as Elements and compounds
40. When the volume of an ideal gas is halved and the Multiplied by 4
temperature is doubled. What happens to the pressure?
41. Which method is not feasible in determining truss Table look-up method
deflections of a statically infinitesimal truss?
42. The procedure for separating a liquid from a mixture by Distillation
vaporizing the liquid and condensing the vapour is called
43. What is an imaginary surface that joins points where all the Wavefront
waves from a source are in the same phase of oscillation?
44. What element is the lightest known metal? Lithium
45. What law expresses the relationship between the heat of Wien’s law
body and wavelength?
46. “The ratio of the square of the time required by a planet to Third
complete one revolution about the sun to the cube of the
distance of the planet to the sun is the same for all planets
in the solar system.” This is known as the ____ law of
Kepler’s planetary motion.
47. What is the heat capacity of one gram of a substance? Molar heat
48. Entropy is a measure of Randomness or Disorder
49. Graduation of elements from one element to the next is less Groups
pronounced in
50. What management function involves orienting personnel in Directing
the most effective way and channelling resources?
51. What refers to the strategic statement that identifies why an Corporate mission
organization exists, its philosophy of management, and its
purpose as distinguished from other similar organizations in
terms of products, services and markets?
52. What type of organization structure in which each project is Product Matrix
assigned to a single organizational unit and the various
functions are performed by personnel within the unit?
53. When there is degradation of service provided by the Has inadequate control
company to clients, it is a sign that the engineer manager
in-charge:
54. What technique is best suited for projects that contain many Benchmark job
repetitions of some standard activities?
55. According to safety standards, the maximum allowable 100
radiation from an electronic equipment must not exceed
___ mr per week.
56. What is the minimum punishment imposed to any person 3 months
who shall give any false or fraudulent statement to the
Board to obtain a Certificate of Registration and/or
Professional ID Card as Electronic Engineer?
57. In a CATV system, head end processor as RF input/output 16
terminal match should a minimum loss of ____ dB.
58. In CATV system, video signal to noise ratio of modulator 38
must be better than ____ dB.
59. Under R.A. 9292, the rate of retainer’s fee to be charged by P1,500

Compiled by:  Pur Yow 

 the consulting electronics engineer for routine r ordinary
consultation will not be less than ____ per month.
60. A process which is adiabatic and reversible is Isentropic
61. What type of impact is when the centers of mass of colliding Eccentric
bodies are not located on the line of impact?
62. What principle states that the electrons fill the orbitals, one Aufbau principle
at a time, starting with the lowest energy orbital then
proceeding to the one with higher energy?
63. What is the maximum number of electrons that can be filled 32
in the fourth shell?
64. Who first identified the plasma in 1879? William Crookes
65. The dry air is composed of how many percent of oxygen? 20.9
66. What was the effectivity of Executive Order No. 109? 12-Jul-93
67. The property that is independent on the size of the system Intensive
68. What is a type of depreciation which does not consider the An unadjusted basis
salvage value of the asset or property?
69. What refers to the study of motion and forces causing the Kinetic
motion of the body?
70. What is the index of energy loss in a complete cycle of Hysteresis loss
magnetization?
71. What is the unit of relative stiffness/rigidity? Dimensionless
72. Poisson’s ratio is the ratio of Lateral stress to lateral
strain
73. The relative humidity is given by the ratio of Partial pressure of the
water vapor and the
saturation vapor
74. Which is not true about metals? Tendency to make brittle
solids
75. Indicate the false statement about ionic compounds: They make good
conductors in solid phase
76. What is a copper-rich Cu-Zn alloy? Brass
77. Which of the following cannot be found in a Psychometric Natural Convection
Chart?
78. A soft material Exhibits low modulus of
elasticity
79. What is the unit of modulus of elasticity? Pascal
80. What is the purpose of recrystallization of all metals? To relieve residual stress
from cold working
81. Direct labor costs incurred in industry and direct material Prime Cost
costs are the total amount of materials that go into
production. The sum of these direct costs is called
82. According to Bohr’s atomic theory of hydrogen, the velocity Directly proportional to
of an electron in the orbit with the radius r is the square root of r
83. What is the approximate range of chromium in ferritic- 16% to 20%
stainless steel?
84. What is the maximum stress which a material can Endurance limit
theoretically endure an infinite number of stress?
85. In science, what refers to an idea put forth for testing? Hypothesis
86. Hardness test determines Resistance to surface
deformation
87. The rolling resistance of a body is the Deformation of the rolling
body and the surface
88. Like the Soderberg criterion, the Goodman criterion should Cast iron
be used in all of the following except:
89. The division of cast iron and steel in iron-carbon alloy is 2%
composed of how many percent of carbon?
90. The compression ratio of a gas compression process is the Pressure
ratio of
91. What is a weak bond due dipole-dipole interaction of Secondary bond
elements or molecules?
92. The act of changing the energy of a particle, body or system Work
is
93. The direction of the electron’s angular momentum vector is Magnetic
determined by ____ quantum number.
94. It is an interaction of bond within substances is interrupted Decomposition or analysis
by heat or external forces producing smaller molecules or
Compiled by:  Pur Yow 
 elements.
95. What is process of planning, organizing, and controlling Operations Management
operations to achieve the goal effectively and efficiently?
96. What is an artificial expense that spreads the purchase price Depreciation
of an asset or property over a number of years?
97. Torsion testing measures Failure in torsion
98. Hardness test measures the Capability of a material to
resist surface deformation
99. In a crystal structure, a constant lattice is the Distance of atoms in the
lattice
100. Molecules in a hot temperature have ____ mean kinetic Higher
energy.
101. The moment due to a force applied is zero only when The moment passes
through the center of
rotation
102. When a load is applied to beam axially on the center of the Concentrically
cross-section. The beam is said to be loaded
103. Caustic soda is used in making soap, textiles and paper. Sodium hydroxide
What is another term for caustic soda?
104. What is the lowest pitch that can be produced from a Fundamental
musical tone source?
105. The equilibrium distance between atoms in an ionic Atomic weight
compound is...
106. The moment of inertia of a body comes in action. In circular motion
107. It is the hardest form of steel. Martensite

Compiled by:  Pur Yow 