Variable Flow PICV - Case Study

PICV &
DOMINATOR
FOR VARIABLE FLOW SYSTEMS
C R E AT I N G C O M F O R T I N
E N E RGY E FFI C I E N CY
Including the NEW

VARIABLE FLOW VARIABLE FLOW
CONTENTS
3 Case Study: Qatar National 21 DE40BFP DN15/15
Qatar National
Rail Scheme, Qatar

Rail Scheme
22 DE40BSFP DN15/15
4 Why choose the The Rail Doha scheme consists of a 300-kilometre metro
Crane FS PICV? 23 Case Study: Nine Elms network with four lines (red, gold, green & blue) with
80 stations; and light rail networks serving residential
5 Pressure Independent 24 Why Choose Peak Pro developments, such as Lusail, Education City and
Control Valve Dominators? West Bay. The Lusail LRT (Light Rail) project consist
of four lines totalling 30km, 8 underground stations
6 How does the Crane FS Dominator Peak Pro Range
and 25 at-grade stations. Red Line North will extend
approximately 13 km northward from Musherib station,
PICV work?
25 DD40BSR1B DN15/15 and has 7 underground stations. Two parallel tunnels
will be excavated for a length of about 11.6 km and an
7 Technical Description
Summary 26 DD40BSR2B DN15/15 internal diameter of 6.17 metres. Red Line South has
12 km long underground sections between Doha City
27 DD40BSS4B DN15/15 Centre and the Airport. Green Line, has 15 km long
8 Example Flow Performance underground sections which run north-south through
Graphs the city. An over-ground extension to the underground
28 DD40BSS4B DN15/15
tunnel section will have a total length of 3.2 km, of which
PICV Range 29 Z9601PF
2.7 km will be a bridge from prefabricated components.

9 D995 DN15-20-25
30 Z9701P & Z9701PF
10 Next Generation PICV
31 Z9801P & Z9801PF LOCATION
D995 DN32
Qatar
11 D995 DN32 32 Insulation Jacket
for Z9801P & Z9801PF CLIENT
12 Next Generation PICV Qatar Railways Development Company
33 300mm Insulated
D995 DN40 & DN50
Braided Hoses CONSULTANTS
13 D991 DN40 & DN50 Jacobs Engineering, Louis Berger, Egis, Hill Int’l, Italferr
34 PICV Actuator Options SpA, WSP Parsons, Brinckerhoff, Astad, Atkins.
14 DPIC992F DN50-DN150
35 Actuators: ACT991M /
CHANNEL PARTNER
15 Case Study: 103 Colmore Row ACTD995FB / ACTD995FS /
ACT991TP / ACT991TH AlRiyadh Trading & Contracting
16 Dominator Eco CONTRACTORS

ANEL MEP, Redco Int’l, Abantia, ALYSJ joint venture,
Dominator Eco Range Saudi Bin Laden Group/Porr/HBK JV, TCS.
18 DE40 DN15/15
SPECIFICATION
19 DE40B DN15/15 Crane FS Pressure Independent Control Valves PICV,
Balancing Valves & a wide selection of General Valves
and Strainers.
20 DE40BS DN15/15
TECHNICAL HELPLINE: +44 (0)1473 277400 TECHNICAL HELPLINE: +44 (0)1473 277400
2 3
E: enquiries@cranefs.com W: www.cranefs.com E: enquiries@cranefs.com W: www.cranefs.com
WHY CHOOSE THE CRANE FS PICV?
SIMPLE FLOW SETTING DIAL

• Easy to set by hand for commissioning purposes
• Quick fit actuator connection - no tools required
PRESSURE INDEPENDENT CONTROL VALVE
In modern Building Services projects, the desire for energy efficiency is a primary consideration for designers,
FLOW CONTROL installers, manufacturers, and end users. HVAC systems offer an excellent opportunity for energy savings if
the correct products are specified, selected and installed and the use of these products is clearly understood.
• Accurate
over a wide ΔP range –
For installations incorporating items such as fan coil units (FCU) or chilled beams, the Crane Fluid Systems
up to 800 kPa PICV offers an excellent solution for control of water flow rates, and therefore comfort control and energy
• Guaranteed performance & repeatability savings when used as part of a variable volume system design. For the installer, we offer a range of solutions
– hassle free commissioning which are easy to select, install and commission.
• Linear or equal percentage control Developed in the UK, tested to BSRIA PICV standards and utilising high-quality materials, these valves can
available through actuator offering provide equal percentage performance which delivers optimum control valve authority. Crane FS go further to
flexibility on site give you the flexibility, offering various actuator options and measuring points, along with a wide differential
pressure and flow rate range available.
• Class IV leakage
All these factors combine to ensure our product will help you to design, deliver and maintain a system,
• Flow range 0.008-1.730l/s
which closes the performance gap and enables energy and cost reduction over its lifetime.
Note: Applicable to DN15 only.
Control Characteristics
The D995 Peak Pro PICV is designed with a linear control characteristic to ensure good control over the flow
QUALITY rate at all settings. Our intelligent actuator controls the linear valve characteristics to an equal percentage
characteristic at all valve settings.
• Thesevalves have been categorised in accordance with the PED
(The fluid to be transported is limited to group 2 liquids i.e. non-hazardous. On no account
must these valves be used on any group 1 liquids, group 1 gases or group 2 gases.)
• Comprehensive testing undertaken for each valve – pressure tested to BS EN 12266-1 and
performance tested in accordance with BSRIA BTS01 (10,000 cycles test which is equal to
a design life of 15 years)
• Pressure tested to BS EN 12266-1
• Performance tested in accordance with BSRIA BTS01
4 5
HOW DOES THE CRANE FS PICV WORK? TECHNICAL DESCRIPTION SUMMARY
1. Differential Pressure Control APPLICATION DIFFERENTIAL VARIANTS /

Heating and cooling hydronic systems. PRESSURE FLOW RANGE
As the flow rates in the distribution pipework
fluctuate to match demand, the available
FUNCTIONS: Activation up to 800kPa Peak Pro PICV
pressure at individual terminal units varies.
Flow Control DN15
This variation in available pressure has the
- Equal percentage control LF 0.008 – 0.080 I/s
effect of changing the flow rate through the Activation
DIFFERENTIAL
P1 SF 0.060 – 0.200 I/s
PRESSURE characteristics (default) DN15 LF 20 kPa
terminal sub-circuit, i.e. an increase in CONTROLLER P2 HF 0.010 – 0.370 l/s
- Linear control characteristic SF 25 kPa
pressure gives an increased flow rate.
- Both available with position HF 50 kPa
DN20
To negate these fluctuating pressures, the PICV Feedback signal SF 0.070-0.350 l/s
- Multiple control signal compatibility DN20 SF 27kPa HF 0.075-0.420 l/s
maintains a constant pressure drop across its
HF 40kPa
seat P1 to P2, therefore maintaining a constant
LEAKAGE RATE: DN25
flow rate to the terminal. DN25 SF 40kPa
Class IV to EN 1349 0.01% SF 0.120-0.600 l/s
HF 70kPa
2. Flow Regulation of stated max flow HF 0.360-0.850 l/s
By changing the open space, through which the LF Class III (0.1% of Kv Max) DN32 SF 65kPa DN32
water flows within the valve, the flow rate can be SF Class IV (0.01% of Kv Max) HF 70kPa SF 0.52-1.35 l/s
adjusted and set. The pressure across the seat HF Class IV (0.01% of Kv Max) HF 0.63-1.73 l/s
CHANGE IN OPEN AREA
of the PICV is held constant by the differential FOR FLOW OF WATER DN40 SF 50kPa
pressure controller. Whilst setting, the open DN40
area around the disk will change, resulting in a DN50 SF 40kPa SF 0.39-3.00 l/s
change to the flow rate. The new set flow rate
DN50
recreates the constant seat differential pressure
TEMPERATURE RANGE: SF 0.69-3.80 l/s
P1 to P2. Having set a new flow rate, it will stay
0ºc to 90ºc
constant at the new set value.
Dominator Peak Pro
3. Comfort Control DN15 X DN15
DN20 X DN20
The use of a PICV, as with all 2 port control FAN COIL UNIT
valves, allows for the variation of the flow rate DN25 X DN25
to vary the heat output of the terminal unit.
The PICV is an integral part of the control loop.
4. Thermostat, BMS, PICV &

Terminal Unit ROOM THERMOSTAT
By varying the flow rate we can control the
heat output of the terminal. For PICVs with an
equal percentage characteristic, there is a direct
BMS
relationship between valve position and heat
output, i.e. half open = half heat output.
6 7
D995 DN15-20-25
Pressure Independent Control Valve PN25
EXAMPLE FLOW PERFORMANCE GRAPHS Features & Benefits

• Comprehensive flow range available, allowing for cost effective
Peak Pro Pressure Independent Control Valve valve selections. The PICV Peak Pro has up to 70% higher max
flow compared to the previous model
DN15 PICV Standard Flow Control Characteristic Test
• Accurate over a wide ∆P range - available in both 400 and
800kPa variants
• Class IV leakage*
• PN25 rated product, suitable for high pressure applications
• Design validation testing to BSRIA BTS01. As per Cyclic Testing
requirements, valve subjected to 10,000 cycles (equivalent to 15
years** of typical service)
• Comprehensive testing undertaken for each valve - pressure
tested to BS EN 12266-1 Dimensional Drawings
C2
• Integral test points for verification of ∆P and valve performance
• Built in convoluted integral diaphragm
• Smaller and lighter design suits applications with a small footprint
B
Materials
5
No. Part Material
4
1 Body DZR Brass BS EN 12165 (CW602N) 2
2 Bonnet DZR Brass BS EN 12165 (CW602N)
3 End Cap DZR Brass BS EN 12165 (CW602N)
4 P84 Test Point DZR Brass BS EN 12165 (CW602N) 11
5 Setting Dial Nylon 6
6 DP Controller Stainless Steel 303
7 Springs Stainless Steel 302
8 Diaphragm EPDM
C
7
9 O-Rings EPDM
10 O-Ring Insert DZR Brass BS EN 12165 (CW602N)
Control Characteristics Test Data 11 Stem Stainless Steel 303
1
*DN15 LF Class 3 **based on two full stroke cycles per day 9
DN15 PICV Low Flow Limitation Test

Dimension & Weights 6
A B C C2 D Weight 10
(mm) (mm) (mm) (mm) (mm) End Connections
(kg)
D
DN15 74 36 63 120 27 ½" BSP Female Taper to BS EN 10226-2 0.52 8
DN20 90 47 75 130 30 ¾" BSP Female Taper to BS EN 10226-2 0.82
3
DN25 112 63 75 130 51 1" BSP Female Taper to BS EN 10226-2 1.55
Flow Range
Low Flow (l/s) STD Flow (l/s) High Flow (l/s)
A
DN15 0.008-0.080 0.060 - 0.200 0.10 - 0.370
DN20 - 0.070 - 0.350 0.075 - 0.420 Differential Pressure Range
DN25 - 0.120 - 0.600 0.360 - 0.850 Low Flow (kPa) STD Flow (kPa) High Flow (kPa)
DN15 20-400 25-400 40-400

Pressure/Temperature Ratings 20-800
-
20-800
27-400
40-800
40-400
DN20
- 27-800 40-800
Temperature (°C) 0°C to 90°C - 40-400 70-400
DN25
- 40-800 70-800
Pressure (Bar) 25 Bar
Please request max ∆P on order
PRESSURE RATING: PN25 SPECIFICATION: The PICV shall have a constant control characteristic at all flow settings and control flow rates at
differential pressures up to 800kPa. Flow rates will be externally adjustable, and set point recordable. Integral test
MEDIUM: Group 2 Liquids
points will be fitted to verify setting pressure allowing pumps to be set at optimum speed to maximise energy savings.
END CONNECTIONS: Shall be manufactured from DZR Brass, with Stainless Steel springs, and an EPDM diaphragm. Shall be rated to
BSP Female Taper to BS EN 10226-2 PN25 and operate at temperatures to 90°C. As per Crane FS Peak Pro (Fig D995).
Valid as of 260418
SPARES: Isolating cap part number 0ED13666H.
Every effort has been made to ensure that the information contained in this publication is accurate at the time of publishing. Crane FS Ltd assumes no responsibility Made in
or liability for typographical errors or omissions or for any misinterpretation of the information within the publication and reserves the right to change without notice. Britain
8 9
Next Generation D995 DN32
PICV D995 DN32 High performance valve
with greater flow rates.
Pressure Independent Control Valve PN16
Features & Benefits

BEST IN CLASS - FLOW RATE vs SIZE 1 valve selections. The PICV Peak Pro has up to 80% higher max
• Accurate over a wide ∆P range - up to 800kPa
Crane FS D995
DN32 High Flow • PN16 rated product, suitable for high pressure applications
requirements, valve subjected to 10,000 cycles (equivalent to 15
1.29 years* of typical service)
• Comprehensive testing undertaken for each valve - pressure
tested to BS EN 12266-1
Dimensional Drawings
• Built in convoluted integral diaphragm C2
• Smaller and lighter design suits applications with a small footprint

*based on two full stroke cycles per day
Materials
No. Part Material
Flow Rate l/s 1 Body DZR Brass BS EN 12165 (CW602N) 5
2 Bonnet DZR Brass BS EN 12165 (CW602N)
FEATURES & BENEFITS

4
3 End Cap DZR Brass BS EN 12165 (CW602N) 2
4 P84 Test Point DZR Brass BS EN 12165 (CW602N)
• Low activation & low hysteresis are consistent 6 DP Controller Stainless Steel 303 11
across the operating range. The PICV responds 7 Springs Stainless Steel 302
quickly to maintain a consistent flow which
7
8 Diaphragm EPDM
C
9 O-Rings EPDM
improves pump efficiency, resulting in energy 10 O-Ring Insert DZR Brass BS EN 12165 (CW602N)
1
savings & lower running costs. 11 Stem Stainless Steel 303
• Excellent performance coverage from the

DN32 ensures smaller pipework can be Dimension & Weights 9
specified, compared to using larger sized A B C C2 D Weight

End Connections
valves. A real saving for the contractor & (mm) (mm) (mm) (mm) (mm) (kg) 10
D
end user. DN32 135 100 76 135 56 1-1/4" BSP Taper 2.3 6
• Reductions in weight and footprint allow the 8
valves to be used within smaller voids. Flow Range 3
STD Flow (l/s) High Flow (l/s)

• Available with a range of actuators to suit fan
DN32 0.52-1.35 0.63-1.73
coil units and chilled beam applications. A
Pressure/Temperature Ratings Differential Pressure Range

FLOW MEASUREMENT PERFORMANCE DESIGN Temperature (°C) 0°C to 90°C STD Flow (kPa) High Flow (kPa)
• The PICV Peak Pro has up to • Comprehensive testing undertaken • Design validation testing to Pressure (Bar) 16 Bar DN32 65-800 70-800
80% higher max flow compared for each valve - pressure tested to BSRIA BTS01. As per cyclic
to the previous model BS EN 12266-1 testing requirements, valve
subjected to 10,000 cycles
• Accurate over a wide ∆P range • PN16 rated product (equivalent to 15 years2 of
- up to 800kPa typical service)
• Flow Range PRESSURE RATING: PN16 SPECIFICATION: The PICV shall have a constant control characteristic at all flow settings and control flow rates at
Standard Flow: 0.53 - 1.35 l/s • Integral test points for MEDIUM: Group 2 Liquids
differential pressures up to 800kPa. Flow rates will be externally adjustable, and set point recordable. Integral test
High Flow: 0.62 - 1.73 l/s verification of ∆P and valve END CONNECTIONS:
points will be fitted to verify setting pressure allowing pumps to be set at optimum speed to maximise energy savings.
Shall be manufactured from DZR Brass, with Stainless Steel springs, and an EPDM diaphragm. Shall be rated to
performance BSP Female Taper to BS EN 10226-2 PN16 and operate at temperatures to 90°C. As per Crane FS Peak Pro (Fig D995).
Vaild as of 100221
SPARES: Isolating cap part number 0ED13666H.
1
Data sourced from published competitor flow rates as of February 2021. 2
Based on two full stroke cycles per day or liability for typographical errors or omissions or for any misinterpretation of the information within the publication and reserves the right to change without notice. Britain
10 11
VARIABLE FLOW
Next Generation
N
EW
D995 DN40 & DN50
PICV D995 DN40 & DN50 Pressure Independent Control Valve PN16
Features & Benefits

DN40 BEST IN CLASS - FLOW RATE vs SIZE 1 valve selections. The PICV Peak Pro has up to 25% higher max
• Accurate over a wide ΔP range - up to 800kPa
Crane FS
3.00
D995 DN40 • PN16 rated product, suitable for high pressure applications
Competitor A 2.64 requirements, valve subjected to 10,000 cycles (equivalent to 15
years* of typical service)
• Comprehensive testing undertaken for each valve - pressure tested Dimensional Drawing
Competitor B 2.34 to BS EN 12266-1 Actuator shown for reference
only (supply separately)

• Built in convoluted integral diaphragm
Competitor C 2.10
• Smaller and lighter design suits applications with a small footprint 2 5
*based on two full stroke cycles per day
C2
Competitor D 2.08 1
Materials
C1
4
No. Part Material

1.5 2 2.5 3
1 Body Bronze BS EN 1982 (CC491K)
Flow Rate l/s
2 Bonnet Bronze BS EN 1982 (CC491K) E
D
FEATURES & BENEFITS 3 End Cap Bronze BS EN 1982 (CC491K)
4 P84 Test Point DZR Brass BS EN 12165 (CW602N)
Low Activaton
3
A B
6 DP Controller Stainless Steel 303
The PICV responds very quickly to maintain a
7 Springs Stainless Steel 302
consistent flow, ultimately improving pump efficiency, 2
7
8 Diaphragm EPDM
helping reduce energy usage across the system, 11
9 O-Rings EPDM
resulting in energy savings and lower running costs. 1
10 O-Ring Insert Stainless Steel 303S
Low Hysteresis & Great Control 11 Stem Stainless Steel 303S
The impact of high hysteresis can result in an Dimensions & Weights

inefficient systems that can cause a time delay in
Size A B C1 C2 D E Weight 6
temperature settings that will affect the environment (DN) (mm) (mm) (mm) (mm) (mm) (mm) End Connections (kg)
that you are in. DN40 137.1 118 94 145 104 72 1 ½" BSP 3.60
Female Taper to 9
With low hysteresis and great control the PICV BS EN 10226
7
ensures the system can respond quickly and
10
DN50 161.5 118 99 150 106.5 78 2" BSP 4.25
efficiently resulting in a comfortable environment Female Taper to
BS EN 10226
8
for the end user and ultimately reducing energy

consumption. Flow Range Differential Pressure Range 3
Compact Design, Better For The Planet Size (DN) Flow (l/s) Size (DN) Flow (kPa)
Pressure/Temperature Ratings
The new D995 Peak Pro PICV DN40 & DN50 are
DN40 0.39 - 3.00 DN40 50 - 800 kPa
lighter than the previous models, reducing its carbon Temperature (°C) 0°C to 90°C
footprint (Scope3 emissions), but offers higher DN50 0.69 - 3.80 DN50 40 - 800 kPa Pressure (Bar) 16
maximum flow rates.
• DN40 - 20% weight reduction PRESSURE RATING: PN16 SPECIFICATION: The PICV shall have a constant control characteristic at all flow settings and control
END CONNECTIONS: flow rates at differential pressures up to 800kPa. Flow rates will be externally adjustable, and set point
• DN50 – 37% weight reduction BSP Female Taper to BS EN 10226-2 recordable. Integral test points will be fitted to verify setting pressure allowing pumps to be set at optimum
speed to maximise energy savings. Shall be manufactured from Bronze (CC491K), with Stainless Steel
MEDIUM: Group 2 Liquids
Less raw materials, eco-friendly packaging and lower springs, and an EPDM diaphragm. Shall be rated to PN16 and operate at temperatures to 90°C. As per
Valid as of 260418
Crane FS Peak Pro (Fig D995).
freight impact all contribute to limit CO2 emissions.
SPARES: Isolating cap part number 0ED13666H
1
DN40 Data sourced from published competitor flow rates as of September 2021. 2
Based on two full stroke cycles per day or liability for typographical errors or omissions or for any misinterpretation of the information within the publication and reserves the right to change without notice. Britain
12 13
DPIC992F DN50-DN150
Pressure Independent Control Valves PN16
Features & Benefits

• Optimal control creates energy savings when used as part of a
variable flow system.
• Easy to install in limited and difficult site conditions, for use
with large plant items such as air Handling Units (AHU)
• Built-in differential pressure controller ensures accurate system
design flow rates are achieved and eliminates overflows caused
by fluctuating system pressures, which in turn reduces the system
running costs.
• No balancing method needed for commissioning, saving time
on site
• Linear or equal percentage characteristics, settable with an
actuator, contribute to precise environmental temperature control
• Constant, high valve authority for maximum efficiency,
available in sizes: DN50 to DN150
103 Colmore Row, Birmingham

Materials
L
No. Part Material Specification

LL
L
1 Body Ductile Iron EN-GJS-450-10 (GCD450)

2 Bonnet Ductile Iron EN-GJS-450-10 (GCD450)
103 Colmore Row is Birmingham’s tallest office building Dominator, this ensures a perfect working environment
3 Bottom Cover Ductile Iron EN-GJS-450-10 (GCD450)
at 105.5 metres (346 feet) high and with the apex to for all users of the building.
H2
H2
stand 246 metres above sea level, the new tower and is
H2
4 O-Rings EPDM - Dominator Peak Pro is a lightweight and modular valve
H2
Flow Controller the tallest in the UK outside London. Designed by Doone
system that includes the Peak Pro Pressure Independent
5 Seat Bronze BS EN 1982: CC491K Silver Architects. Comprising 223,631 sq ft of BREEAM
Control Valve for accurate flow, temperature and
D
B
6 Plug Bronze BS EN 1982: CC491K Excellent Grade A office space, the 26 storey building,
D
B pressure control. By utilising the Crane FS Peak Pro
D
B
D
B
7 Stem Stainless Steel 304S15 / 1.4301 boasts a four storey winter garden, along with a two
PICV, the project has been provided the best opportunity
H1
H1
storey top floor restaurants and a ground floor café.
H1
8 Bearing Sleeve Nylon PA66
to realise operational cost savings and increased
H1
9 Guide Bush Stainless Steel 304S15 / 1.4301
As part of Birmingham City Council’s climate change energy efficiency. The PICV has excellent accuracy and
Pressure Controller
W1
W1 W1
W2
W2 W2
strategy, 103 Colmore is the first commercial office hysteresis, which helps maintain the set flow rate and
11 Plug / Stem / Guide Nylon PA66
development in Birmingham’s central business district to limit the occurrences of overflow.
W1 W2
12 Diaphragm EPDM - Note: This Valve is designed to function only with the actuator
benefit from the city’s new District Energy Scheme which
13 Diaphragm Plate Stainless Steel 304S15 / 1.4301
fitted and cannot be used as a Constant Flow Regulator i.e. The use of the Crane FS Gap Detection actuator allowed
without the actuator fitted. aims to cut CO2 emissions by 60 per cent by 2027.
14 Springs Spring Steel - for further operational cost savings by giving excellent
All dimensions are nominal.
In line with the buildings strategy for reduced energy valve authority and controllability at all valve settings.
consumption and to keep C02 emissions low, principal This ensures that a change in valve position translates
Dimensions & Weights
contractor BAM selected Dominator Peak Pro Units to into a change in flow rate/pump speed and therefore
Size L W1 W2 H1 H2 D B Weight Max Flow
(DN) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (kg) Rate (m3/hr) be installed throughout the building. By selecting the realised energy savings.
DN50 254 139 154 101 291 165 50 33 20

Pressure/Temperature Ratings
DN65 272 139 154 185 300 185 65 40 30
Temperature (°C) 5°C to 120°C
DN80 272 139 154 185 300 200 65 43 30
Pressure (Bar) 16 LOCATION ARCHITECTS
DN100 352 139 212 260 320 220 100 74 55
Operating Pressure 50-400 at 100% Flow Birmingham Doone Silver Kerr
DN125 400 139 212 266 346 250 125 93 90 Range Across Valve (kPa) 40-400 at 80% Flow
DN150 451 139 212 350 400 285 150 162 150 30-400 at 30% Flow
SECTOR CONTRACTORS
Commercial BAM
PRESSURE RATING: PN16 FLOW ACCURACY: +/-10%

CLIENT DISTRIBUTOR
END CONNECTIONS: Flanges to BS EN 1092-2 PN16 SEAT LEAKAGE: LINEAR: Class IV (0.01% of Max flow)
OPERATOR: Actuator supplied and fitted. Can be configured to Modulating / 3 Point / On-Off Equal %: 2% of Max Flow Rockspring Property Investment Managers LLP BSS
Linear and Equal Percentage control characteristic and Sterling Property Ventures
IP RATING: IP54
Made in Every effort has been made to ensure that the information contained in this publication is accurate at the time of publishing. Crane FS Ltd assumes no responsibility
Britain or liability for typographical errors or omissions or for any misinterpretation of the information within the publication and reserves the right to change without notice.
14 15
Reduced Embodied Carbon

The Dominator Eco’s innovative design
combines a PICV, H-body and FMD together.
Not only does this make it shorter and
lighter, it also uses less raw materials
to produce, reducing CO2 emitted into
the atmosphere in the extraction,
transportation and manufacturing
processes.
100% Recyclable Packaging

Plastic packaging is a big problem globally,
it can take up to 1000 years to degrade and
ends up in oceans, lakes and environments
where it causes pollution and kills wildlife.
The all-cardboard packaging used when
delivering the Dominator Eco is 100%
recyclable, 100% biodegradable and FSC
traceable to sustainable sources to support
responsible forestry.
Paperless
The paper industry remains one of the
largest consumers of water in the world,
and one sheet of A4 can take up to 20 litres
to produce. The Dominator Eco is paperless,
Focused on sustainability the digital datasheet and installation

manual can be quickly accessed via QR code
on the colour coded tags and also found on
the website. This small change saves around
329kg of paper being used a year, or the
2030 TARGETS
Carbon footprint weight of one Grizzly Bear!

Reduction in water consumed Reduction in greenhouse gas emissions
reduction
per direct labour hour by 2030. per direct labour hour by 2030. One of the core values within Crane Smaller & Lighter
Co. businesses is the elimination of
waste throughout the organisation. The Dominator Eco is 36% lighter and 28%
The Company also has a structured shorter than the equivalent Dominator Peak
cadence and process to manage Pro making it more efficient when shipping
Reduction in electricity consumed Reduction in solid non-hazardous and measure progress of and transporting, you can fit more products
per direct labour hour by 2030. waste per direct labour hour by 2030. sustainability initiatives. on a single pallet.
16 17
DE40 DE40B
DN15/15 Made in
Britain DN15/15 Made in
Britain
Dominator ECO Classic PN16 Dominator ECO with
BSRIA Flushing Drains PN16
Features & Benefits
Features & Benefits
• Reduced embodied carbon and simple installation by combining
a PICV, H-body and FMD together, making the Dominator Eco • Innovative design – Unique differential pressure mechanism, ensuring
lighter and shorter than our current Dominator Classic accurate flow control and allowing the valve to be back flushed if
• Innovative design - Unique differential pressure mechanism, required. Patent Pending
ensuring accurate flow control and allowing the valve to be back • Reduced embodied carbon and simple installation by combining a
flushed if required. Patent Pending PICV, H-body and FMD together, making the Dominator Eco 36%
• Reliable flow measurement through the integral FMD in lighter and 28% shorter than our current 40mm Dominator alternative
accordance to • Reliable flow measurement through the integral FMD in accordance
BS 7350 to BS 7350
• Easily identifiable chilled and heating applications via the colour • Easily indentifiable chilled and heating applications via the colour
coded tags that also display the fan coil reference Dimensional Drawings coded tags that also display the fan coil reference Dimensional Drawings
• Paperless - Digital datasheet, IOM and commissioning tool can • Paperless – Digital datasheet, IOM and commissioning tool can be
be quickly accessed via QR code on the colour coded tags 1 2 quickly accessed via QR code on the colour coded tags 1 2 3
• Peace of mind - 100% of Dominator Ecos are tested before • BSRIA BG29 compliant design – Full forward-flushing and back-
shipping. This involves pressure testing to BS EN 12266-1 and flushing capabilities
performance testing in accordance with BSRIA BTS01 • Peace of mind – 100% of Dominator Ecos are tested before shipping.
• Direct mounting to FCUs – designed for easy access to This involves pressure testing to BS EN 12266-1 and performance
components in confined spaces testing in accordance with BSRIA BTS01
• Flow regulation and ∆P verification – Utilising setting dial and • Direct mounting to FCUs – Designed for easy access to components
integrated test points in confined spaces
• Comprehensive flow range available, allowing for cost effective • Flow regulation and ∆P verification – Utilising setting dial and
valve selections integrated test points
Available in standard or reverse handed orientations. Available in standard or reverse handed orientations.
• PN16 rated product, suitable for building services applications • Comprehensive flow range available, allowing for cost effective valve
selections
• PN16 rated product, suitable for building services applications
• Increased functionality and reduced material requirement
– Interchangeable test points and nozzles facilitate ∆P measurement
and flushing where required
Materials Materials
No. Description Material QTY No. Description Material QTY
Male Ended Low Flow 0.010 - 0.080l/s Male Ended Low Flow 0.010 - 0.080l/s
1 Male Ended Std. Flow 0.025 - 0.170l/s DZR Brass BS EN DZR Brass BS EN
12165 (CW602N) 1 1 Male Ended Std. Flow 0.025 - 1.170l/s 1
Male Ended High Flow 0.110 - 0.290l/s Male Ended High Flow 0.110 - 0.290l/s 12165 (CW602N)
2 End Connection Sub-Assembly DZR Brass BS EN DZR Brass BS EN

2 2 Drain Tee Assembly – Male Captive 2
12165 (CW602N) 12165 (CW602N) End Connections
NOTE: Sealing gasket and O-rings material are EPDM DZR Brass BS EN
End Connections 3 End Connection Sub-Assembly
12165 (CW602N) 2
NOTE: Sealing gasket and O-rings material are EPDM
PICU Pressure PICU Pressure

Operating Pressure 20 - 400 (DN15 LF) Operating Pressure 20 - 400 (DN15 LF)
Range Across Valve 20 - 400 (DN15 SF) Range Across Valve 20 - 400 (DN15 SF) Compression Solder*
(kPa) 40 - 400 (DN15 HF) Compression Solder* (kPa) 40 - 400 (DN15 HF) *15mm only
*15mm only
PRESSURE RATING: PN16 SPECIFICATION: DZR Terminal unit valve set to be a pre-assembled unit as supplied by a single PRESSURE RATING: PN16 SPECIFICATION: DZR Terminal unit valve set to be a pre-assembled unit as supplied by a single
manufacturer. Unit to include a flushing bypass with integral isolation valves and Pressure Independent manufacturer. Unit to include a flushing bypass with integral isolation valves, Pressure Independent
TEMPERATURE RATING: 0 to 90°C TEMPERATURE RATING: 0 to 90°C
Commissioning Unit (PICU). Flow rate to be measurable using integral test points as per BS 7350. Flow Commissioning Unit (PICU) and flushing valves to comply to BG29 guidelines. Flow rate to be measurable
WEIGHT 1.1kg WEIGHT 1.6kg
rate to be adjustable between 0.010-0.290l/s, dependent on variant. Connections to be flat face unions using integral test points as per BS 7350. Flow rate to be adjustable between 0.010-0.290l/s, dependent
END CONNECTIONS: END CONNECTIONS: on variant. Connections to be flat face unions between components with female BSPT on system side and
between components with female BSPT on system side and compression/solder on terminal side. Unit to
Valve body - BSP Taper be manufactured from DZR Brass to BS EN 12164/5 CW602N. Valve assembly will be labelled to include Valve body - BSP Taper compression/solder on terminal side. Unit to be manufactured from DZR Brass to BS EN 12164/5 CW602N.
Vaild as of 130922
Vaild as of 130922
Terminal end - Compression/Solder the terminal unit reference number, service and part number as per Dominator Eco. Terminal end - Compression/Solder Valve assembly will be labelled to include the terminal unit reference number, service and part number as per
Dominator Eco.
SPARES: Refer to IOM SPARES: Refer to IOM
Made in Every effort has been made to ensure that the information contained in this publication is accurate at the time of publishing. Crane FS Ltd assumes no responsibility Every effort has been made to ensure that the information contained in this publication is accurate at the time of publishing. Crane FS Ltd assumes no responsibility Made in
Britain or liability for typographical errors or omissions or for any misinterpretation of the information within the publication and reserves the right to change without notice. or liability for typographical errors or omissions or for any misinterpretation of the information within the publication and reserves the right to change without notice. Britain
18 19
DE40BS DE40BFP
DN15/15 Made in
DN15/15 Made in
Britain Britain
Dominator Eco with Dominator Eco with BSRIA
BSRIA Flushing Strainer PN16 Flushing Drains & 4-Port PN16
Features & Benefits Features & Benefits

• Innovative design - Unique differential pressure mechanism, ensuring • Innovative design - Unique differential pressure mechanism, ensuring
accurate flow control and allowing the valve to be back flushed if accurate flow control and allowing the valve to be back flushed if
required. Patent Pending required. Patent Pending
• Reduced embodied carbon and simple installation by combining a PICV, • Reduced embodied carbon and simple installation by combining a PICV,
H-body and FMD together, making the Dominator Eco 36% lighter and H-body and FMD together, making the Dominator Eco 33% lighter and
22% shorter than our current 40mm Dominator alternative 20% shorter than our current 40mm Dominator alternative
• Reliable flow measurement through the integral FMD in accordance to • Reliable flow measurement through the integral FMD in accordance to
BS 7350 BS 7350
• Easily identifiable chilled and heating applications via the colour coded Dimensional Drawings • Easily identifiable chilled and heating applications via the colour coded
tags that also display the fan coil reference tags that also display the fan coil reference Dimensional Drawings
• Paperless - Digital datasheet, IOM and commissioning tool can be • Paperless - Digital datasheet, IOM and commissioning tool can be
quickly accessed via QR code on the colour coded tags 1 2 3 quickly accessed via QR code on the colour coded tags 1 2 4 3 5
• BSRIA BG29 compliant design - Full forward-flushing and back-flushing • BSRIA BG29 compliant design - Full forward-flushing and back-flushing
capabilities capabilities
4
• Peace of mind - 100% of Dominator Ecos are tested before shipping. • Peace of mind - 100% of Dominator Ecos are tested before shipping.
5
This involves pressure testing to BS EN 12266-1 and performance This involves pressure testing to BS EN 12266-1 and performance
testing in accordance with BSRIA BTS01 testing in accordance with BSRIA BTS01
• Direct mounting to FCUs – designed for easy access to components in • Direct mounting to FCUs – designed for easy access to components in
confined spaces confined spaces
Available in standard or reverse handed orientations. Available in standard or reverse handed orientations.
• Flow regulation and ∆P verification – Utilising setting dial and integrated • Flow regulation and ∆P verification – Utilising setting dial and integrated
test points test points
• System performance maintained - Fitted strainer helps filter particles and • Minimum flow protection - 4-Port valve included to provide a constant
impurities in the fluid maintaining system cleanliness (if cleaned regularly) flow rate irrespective of load demand
• Comprehensive flow range available, allowing for cost effective valve • Comprehensive flow range available, allowing for cost effective valve
selections selections
• PN16 rated product, suitable for building services applications • PN16 rated product, suitable for building services applications
• Increased functionality and reduced material requirement - • Increased functionality and reduced material requirement -
Interchangeable test points and nozzles facilitate ∆P measurement and Interchangeable test points and nozzles facilitate ∆P measurement and
flushing where required flushing where required
End Connections End Connections

Materials Materials
No. Description Material QTY No. Description Material QTY
Male Ended Low Flow 0.010 - 0.080l/s Male Ended Low Flow 0.010 - 0.080l/s
1 Male Ended Std. Flow 0.025 - 0.170l/s DZR Brass BS EN 1 Male Ended Std. Flow 0.025 - 0.170l/s DZR Brass BS EN
12165 (CW602N) 1 12165 (CW602N) 1
Male Ended High Flow 0.110 - 0.290l/s Male Ended High Flow 0.110 - 0.290l/s
2 Drain Tee Assembly – Male Captive DZR Brass BS EN 2 Drain Tee Assembly – Male Captive DZR Brass BS EN
12165 (CW602N) 2 Compression Solder 12165 (CW602N) 2
Compression Solder
*15mm only
3 End Connection Sub Assembly DZR Brass BS EN 3 4-Port Valve DZR Brass BS EN *15mm only
12164 (CW602N) 2 12165 (CW602N) 1
DZR Brass BS EN DZR Brass BS EN

4 Nipple - 1/2” Part
12165 (CW602N) 1 PICU Pressure 4 Adaptor 4-Port
12165 (CW602N) 4 PICU Pressure
5 PN16 Strainer - D298 Bronze BS EN Operating Pressure 20 - 400 (DN15 LF) 5 End Connection Sub Assembly DZR Brass BS EN Operating Pressure 20 - 400 (DN15 LF)
1982 CC491K 1 12165 (CW602N) 2
Range Across Valve 20 - 400 (DN15 SF) Range Across Valve 20 - 400 (DN15 SF)
(kPa) 40 - 400 (DN15 HF) (kPa) 40 - 400 (DN15 HF)
NOTE: Sealing gasket and O-rings material are EPDM NOTE: Sealing gasket and O-rings material are EPDM
PRESSURE RATING: PN16 SPECIFICATION: DZR Terminal unit valve set to be a pre-assembled unit as supplied by a single PRESSURE RATING: PN16 SPECIFICATION: DZR Terminal unit valve set to be a pre-assembled unit as supplied by a single
manufacturer. Unit to include a flushing bypass with integral isolation valves, Pressure Independent manufacturer. Unit to include a flushing bypass with integral isolation valves, Pressure Independent
TEMPERATURE RATING: 0 to 90°C TEMPERATURE RATING: 0 to 90°C
Commissioning Unit (PICU), strainer and flushing valves to comply to BG29 guidelines. Flow rate to be Commissioning Unit (PICU), 4-Port and flushing valves to comply to BG29 guidelines. Flow rate to be
WEIGHT 1.8kg WEIGHT 2kg
measurableusing integral test points as per BS 7350. Flow rate to be adjustable between 0.010-0.290l/s, measurable using integral test points as per BS 7350. Flow rate to be adjustable between 0.010-0.290l/s,
END CONNECTIONS: END CONNECTIONS: dependent on variant. Connections to be flat face unions between components with female BSPT on system
dependent on variant. Connections to be flat face unions between components with female BSPT on
Valve body - BSP Taper Valve body - BSP Taper side and compression/solder on terminal side. Unit to be manufactured from DZR Brass to BS EN 12164/5
Vaild as of 20/09/22
system side and compression/solder on terminal side. Unit to be manufactured from DZR Brass to BS EN
Terminal end - Compression/Solder Terminal end - Compression/Solder CW602N. Valve assembly will be labelled to include the terminal unit reference number, service and part
12164/5 CW602N. Valve assembly will be labelled to include the terminal unit reference number, service
and part number as per Dominator Eco. SPARES: Refer to IOM number as per Dominator Eco.
SPARES: Refer to IOM
Made in Every effort has been made to ensure that the information contained in this publication is accurate at the time of publishing. Crane FS Ltd assumes no responsibility Every effort has been made to ensure that the information contained in this publication is accurate at the time of publishing. Crane FS Ltd assumes no responsibility Made in
Britain or liability for typographical errors or omissions or for any misinterpretation of the information within the publication and reserves the right to change without notice. or liability for typographical errors or omissions or for any misinterpretation of the information within the publication and reserves the right to change without notice. Britain
20 21
DE40BSFP
DN15/15 Made in
Britain
Nine Elms
Dominator Eco with BSRIA
Flushing Drain, Strainer & 4-Port PN16
Features & Benefits London, UK

• Innovative design - Unique differential pressure mechanism, ensuring accurate
flow control and allowing the valve to be back flushed if required. Patent Pending The Nine Elms N8 Tower development comprises of
• Reduced embodied carbon and simple installation by combining a PICV, H-body one, two & three-bedroom flats and penthouses, plus
and FMD together, making the Dominator Eco lighter and shorter commercial & retail space on the lower levels.
• Reliable flow measurement through the integral FMD in accordance to BS 7350
• Easily identifiable chilled and heating applications via the colour coded tags that Crane FS Dominator Peak Pro with PICV, BSRIA
also display the fan coil reference Flushing Drain & FMD along with a range of general
• Paperless - Digital datasheet, IOM and commissioning tool can be quickly valves were chosen for this modern mixed-use project.
accessed via QR code on the colour coded tags
• BSRIA BG29 compliant design - Full forward-flushing and back-flushing
capabilities
1 2 4 3 5
• Peace of mind - 100% of Dominator Ecos are tested before shipping.
This involves pressure testing to BS EN 12266-1 and performance testing SECTOR
in accordance with BSRIA BTS01 Mixed Development
• Direct mounting to FCUs – designed for easy access to components in
confined spaces
• Flow regulation and ∆P verification – Utilising setting dial and integrated test LOCATION
points 7 6
New Covent Garden Market, London
• Minimum flow protection - 4-Port valve included to provide a constant flow
Available in standard or reverse handed orientations.
rate irrespective of load demand
• System performance maintained - Fitted strainer helps filter particles and
impurities in the fluid maintaining system cleanliness (if cleaned regularly)
CLIENT
• Comprehensive flow range available, allowing for cost effective valve selections St Modwen
• PN16 rated product, suitable for building services applications
• Increased functionality and reduced material requirement - Interchangeable test
CHANNEL PARTNER
points and nozzles facilitate ∆P measurement and flushing where required
BSS
Materials
No. Description Material QTY
Male Ended Low Flow 0.010 - 0.080l/s
DZR Brass BS EN End Connections
1 Male Ended Std. Flow 0.025 - 0.170l/s 1
Male Ended High Flow 0.110 - 0.290l/s 12165 (CW602N)
2 Drain Tee Assembly – Male Captive DZR Brass BS EN

12165 (CW602N) 2
3 4-Port Valve DZR Brass BS EN

12165 (CW602N) 1
4 Adaptor 4-Port DZR Brass BS EN

12165 (CW602N) 4 Compression Solder*
*15mm only
5 End Connection Sub Assembly DZR Brass BS EN
12165 (CW602N) 2
DZR Brass BS EN
6 Nipple - 1/2” Part
12165 (CW602N) 1 PICU Pressure
7 PN16 Strainer - D298 Bronze BS Operating Pressure 20 - 400 (DN15 LF)
EN 1982 CC491K 1
Range Across Valve 20 - 400 (DN15 SF)
(kPa) 40 - 400 (DN15 HF)
PRESSURE RATING: PN16 SPECIFICATION: DZR Terminal unit valve set to be a pre-assembled unit as supplied by a single
manufacturer. Unit to include a flushing bypass with integral isolation valves, Pressure Independent
TEMPERATURE RATING: 0 to 90°C
Commissioning Unit (PICU), strainer, 4-port and flushing valves to comply to BG29 guidelines. Flow rate
WEIGHT 2.2kg
to be measurableusing integral test points as per BS 7350. Flow rate to be adjustable between 0.010-
END CONNECTIONS: 0.290l/s, dependent onvariant. Connections to be flat face unions between components with female BSPT
Valve body - BSP Taper
on system side and compression/solder on terminal side. Unit to be manufactured from DZR Brass to BS
Terminal end - Compression/Solder EN 12164/5 CW602N. Valve assembly will be labelled to include the terminal unit reference number, service
SPARES: Refer to IOM and part number as per Dominator Eco.
Made in Every effort has been made to ensure that the information contained in this publication is accurate at the time of publishing. Crane FS Ltd assumes no responsibility
Britain or liability for typographical errors or omissions or for any misinterpretation of the information within the publication and reserves the right to change without notice.
22 23
Dominator
®
DD40BSR1B
DN15/15
WHY CHOOSE PEAK PRO DOMINATORS? Dominator Peak Pro with PICV,
FMD & Drain Port PN16
Features & Benefits

• Compact design, with flow and return legs at equal
lengths, for simple direct mounting onto terminal unit
• Fitted with Peak Pro with a wide range of settable flows to suit
all applications
• Includes Venturi metering station for improved accuracy and
pressure drop recovery
• All valves are subject to both a pressure test, in accordance with BS EN
12266-1, as well as a flow limitation test, in accordance to BSRIA BTS1.
This provides reassurance of performance and accuracy within each valve
• Bypass unit with integrated 3-way isolation valves 3
4
• Integrated dial allowing for calibrated setting of the PICV with integrated
test points allowing for ∆P verification

NOM. A B C D E WEIGHT 2
SIZE (mm) 1
(mm) (mm) (mm) (mm) (kg)
DN15 70 27 33 120 179 2.0 Available in standard or reverse handed orientations.

Valve angles can be configured to suit fan coil requirements.
Materials
The Dominator Peak Pro is a compact and modular valve system that combines NO. DESCRIPTION MATERIAL QTY
A
DZR Brass BS EN
the Peak Pro Pressure Independent Control Valve (D995) for accurate flow, 1 H-Body Assembly
12165 (CW602N)
1
temperature and pressure control.

DN15 PICV - Male Ended Low Flow 0.008 - 0.080l/s A DZR Brass
2 DN15 PICV - Male Ended Std Flow 0.060 - 0.200l/s B BS EN 12165 1
DN15 PICV - Male Ended High Flow 0.100 - 0.370l/s C (CW602N)
• 40/80mm pipe centres to fit Fan Coil Units & Chilled Beams
B
DN15 - High Flow FMD 4.6Kvs H

DZR Brass
• Equal lengths for ease of fitting
C
DN15 - Std Flow FMD 1.6Kvs S
3 BS EN 12165 1
DN15 - Low Flow FMD 0.62Kvs L D
(CW602N)
• Highly configurable design to suit horizontal and vertical pipe arrangements DN15 - Ultra Low Flow FMD 0.24Kvs U E
DZR Brass BS EN
• Accommodates reduced drip tray length solder or compression adaptors 15 & 22mm 4
Compression Adaptor A
12165 (CW602N)
2
DZR Brass BS EN
• BSRIA flushing version with full bore for effective flushing velocity Solder Adaptor B
12165 (CW602N)
2

This lightweight unit is supplied with an integral Venturi metering station for an improved flow range, Adaptors End Connections
equal lengths through union connections and the ability to orientate the valve on-site for an easier and
PICV Pressure/Temperature Ratings
faster install.
TEMPERATURE (°C) 0°C to 90°C
The Dominator Peak Pro has been designed to deliver and maintain a system which closes the PRESSURE (BAR) 16 Bar Example figure number guide
performance gap and enables energy and cost reduction over its lifetime. Every valve is subject to both OPERATING 20 - 400 (DN15 LF)
a pressure test, in accordance with BS EN 12266-1, as well as a flow limitation test, in accordance to PRESSURE RANGE 25 - 400 (DN15 SF)
DD40 B S R 1 B
R½" to Rc ¾" Compression Solder
BSRIA BTS1. ACROSS VALVE (kPa) 40 - 400 (DN15 HF)
FIG PICV FMD STD/REV TYPE END CXN Adaptor (A) (B)
Suitable for horizontal or vertical coil arrangements and available handed for 4 pipe systems. The
Dominator Peak Pro not only saves installation time and reduces the product footprint but simplifies the PRESSURE RATING: PN16 SPECIFICATION DZR Terminal unit valve set to be a pre-assembled unit as supplied by a single
ordering process, allows phased delivery direct to site if required and reduces the risk of failing joints. TEMPERATURE RATING: 0 to 90°C manufacturer. Unit to include a flushing bypass with integral isolation valves, PICV and Venturi style FMD with
integrated drain port. Flow rate to be adjustable between 0.008 – 0.37l/s, dependent on variant. Connections
END CONNECTIONS:
The following pages show each available set up in the Dominator range to make sure that we cover you H-Body - BSP Taper
to be flat face union connections between components with female BSPT on system side and compression/
solder on terminal side. Unit to be manufactured from DZR Brass to BS EN 12164/5 CW602N. Valve
for every requirement possible. Terminal end - Compression/Solder
Vaild as of 300718
assembly will be labelled to include the terminal unit reference number, service and flow rate. As per Crane
SPARES: Gasket 0J00889J FS Dominator Peak Pro.
Made in
Every effort has been made to ensure that the information contained in this publication is accurate at the time of publishing. Crane FS Ltd assumes no responsibility or liability for
typographical errors or omissions or for any misinterpretation of the information within the publication and reserves the right to change without notice.
Britain
TECHNICAL HELPLINE: +44 (0)1473 277400

TECHNICAL HELPLINE: +44 (0)1473 277400 TECHNICAL
E: HELPLINE: +44
enquiries@cranefs.com W:(0)1473 277400
www.cranefs.com
24 25
Dominator Dominator
® ®
DD40BSR2B DD40BSR2BS
DN15/15 DN15/15
Dominator Peak Pro with PICV, Dominator Peak Pro with PICV,
BSRIA Flushing Drain & FMD PN16 BSRIA Flushing Drain, FMD & Strainer PN16

• Compact design, with flow and • Bypass unit with integrated
• Compact design, with flow and return legs at equal
return legs at equal lengths, for 3-way isolation valves
lengths, for simple direct mounting onto terminal unit
simple direct mounting onto • Flushing valves on flow and return
• Fitted with Peak Pro with a wide range of settable flows to suit
terminal unit - in accordance with BSRIA BG29
all applications DO NOT SCALE ALL DIMENSIONS IN MM UNLESS STATED OTHERWISE IF IN
• Fitted with Peak Pro with a wide • Integrated dial allowing for
• Includes Venturi metering station for improved accuracy and 1
calibrated setting of the PICV with

2 3 4 5 6 7
range of settable flows to suit all DO NOT SCALE UNCONTROLLED COPY

ALL DIMENSIONS IN MM UNLESS STATED OTHERWISE
pressure drop recovery integrated test points allowing for
applications 1 2 3 4 5 6 7
• All valves are subject to both a pressure test, in accordance with BS EN • Includes Venturi metering station ∆P verification
F UNCONTROLLED COPY
12266-1, as well as a flow limitation test, in accordance to BSRIA BTS1. • Fitted strainer makes a
for improved accuracy and Dimensional Drawings
F
This provides reassurance of performance and accuracy within each valve pressure drop recovery significant contribution to the 1 2
1 2
• Bypass unit with integrated 3-way isolation valves • All valves are subject to both reliability of a piping system,
• Flushing valves on flow and return - in accordance with BSRIA BG29 1 3 a pressure test, in accordance and ensures performance is
E
1 2
• Integrated dial allowing for calibrated setting of the PICV with integrated with BS EN 12266-1, as well as a maintained over the lifetime of
the system (if cleaned regularly).
E
test points allowing for ∆P verification flow limitation test, in accordance

to BSRIA BTS1. The strainer filters particles and
Dimensions & Weights This provides reassurance of impurities in the fluid, protecting
D
performance and accuracy within hydronic equipment such as 66 33 44 55
NOM. A B C D E F G WEIGHT each valve pumps, control valves, heat

D
SIZE (mm) (mm) (mm) (mm) (mm) (mm) (mm) (kg) 2 4 5 Available6 in standard or reverse handed
3 orientations.
4 5
exchangers etc. Valve angles can be configured to suit fan coil requirements.
DN15 70 27 33 120 195 239 97 2.5 Available in standard or reverse handed orientations.
C
Valve angles can be configured to suit fan coil requirements.
Materials C
NOM. A B C D E F G H I J WGT G
NO. DESCRIPTION MATERIAL QTY SIZE (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (kg) A
H I
DZR Brass BS EN G DN15 70 27 33 120 195 239 B 97 41 36 76 2.8
1 H-Body Assembly 1 A
12165 (CW602N) B
B
2 DN15 PICV - Male Ended Std Flow 0.060 - 0.200l/s B BS EN 12165 1
Materials C
D
DN15 PICV - Male Ended High Flow 0.100 - 0.370l/s C (CW602N) E
B NO. DESCRIPTION A MATERIAL QTY
J F
DN15 - High Flow FMD 4.6Kvs H DZR Brass BS EN
DZR Brass C 1 H-Body Assembly A
1 SUBJECT STATUS
LCV
DN15 - Std Flow FMD 1.6Kvs S C CRANE LTD. 12165 (CW602N)
THIS DRAWING IS A COPY AND IS NOT THIRD ANGLE PROJECTION Concept
3 BS EN 12165 1 D
TO REVISION CONTROL - CHECK ISSUE BEFORE USE
VERSION P03.37
DN15 - Low Flow FMD 0.62Kvs L
(CW602N) E
DN15 PICV - Male Ended Low Flow 0.008 - 0.080l/s AC CRANEDZR
LTD. Brass THIS DRAWING IS A COPY AND IS NOT SUBJECT THIRD ANGLE PROJECTION
DRAWN KC 20/12/19
MATERIAL & STANDARD
STATUS
Concept L
DN15 - Ultra Low Flow FMD 0.24Kvs U TO REVISION CONTROL - CHECK ISSUE BEFORE USE
Adaptors End Connections
F
2 DN15 PICV - Male Ended Std Flow 0.060 - 0.200l/s B BS EN 12165 1 CHECKED
DRAWN KC
VERSION
20/12/19
SCALE
MATERIALSHEET
P03.37
NO.
& STANDARDDRAW
DZR Brass BS EN DN15 PICV - Male Ended High Flow 0.100 - 0.370l/s C (CW602N) APPROVED 0.750 1 OF 1 NUMB
4 DN15 Flushing Valve 2 CHECKED
SCALE SHEET NO.
12165 (CW602N) DN15 - High Flow FMD 4.6Kvs H APPROVED 0.750 1 OF 1
DR
N
DZR Brass
DZR Brass BS EN DN15 - Std Flow FMD 1.6Kvs S
Compression Adaptor A 2 3 BS EN 12165 1
12165 (CW602N) DN15 - Low Flow FMD 0.62Kvs L
(CW602N)
5 DN15 - Ultra Low Flow FMD 0.24Kvs U
DZR Brass BS EN
Solder Adaptor B 2 DZR Brass BS EN
12165 (CW602N) 4 DN15 Flushing Valve 2
Adaptors End Connections 12165 (CW602N)
NOTE: Sealing gasket and O-rings material are EPDM R½" to Rc ¾" Compression Solder
DZR Brass BS EN
Compression Adaptor A 2 Adaptor (A) (B)
12165 (CW602N)
PICV Pressure/Temperature Ratings 5
DZR Brass BS EN
Solder Adaptor B 2
12165 (CW602N) PICV Pressure/Temperature Ratings
TEMPERATURE (°C) 0°C to 90°C
Bronze BS EN 1982
6 Strainer 1
PRESSURE (BAR) 16 Bar (CC491K) TEMPERATURE (°C) 0°C to 90°C
OPERATING 20 - 400 (DN15 LF) NOTE: Sealing gasket and O-rings
PRESSURE RANGE 25 - 400 (DN15 SF)
B material are EPDM
PRESSURE (BAR) 16 Bar
ACROSS VALVE (kPa) 40 - 400 (DN15 HF)
Adaptor (A) (B) B S OPERATING 20 - 400 (DN15 LF)
STRAINER
PRESSURE RATING: PN16 SPECIFICATION DZR Terminal unit valve set to be a pre-assembled unit as supplied by a single
TEMPERATURE RATING: 0 to 90°C manufacturer. Unit to include a flushing bypass with integral isolation valves, PICV, Venturi style FMD and
TEMPERATURE RATING: 0 to 90°C manufacturer. Unit to include a flushing bypass with integral isolation valves, PICV, Venturi style FMD and
flushing valves to comply to BG29 guidelines. Flow rate to be adjustable between 0.008 – 0.37l/s, dependent
END CONNECTIONS: flushing valves to comply to BG29 guidelines. Flow rate to be adjustable between 0.008 – 0.37l/s, dependent
on variant. Connections to be flat face union connections between components with female BSPT on system END CONNECTIONS:
H-Body - BSP Taper on variant. Connections to be flat face union connections between components with female BSPT on system
side and compression/solder on terminal side. Unit to be manufactured from DZR Brass to BS EN 12164/5 H-Body - BSP Taper
Terminal end - Compression/Solder side and compression/solder on terminal side. Unit to be manufactured from DZR Brass to BS EN 12164/5
Vaild as of 300718
Vaild as of 010720
CW602N. Valve assembly will be labelled to include the terminal unit reference number, service and flow rate. Terminal end - Compression/Solder
CW602N. Valve assembly will be labelled to include the terminal unit reference number, service and flow rate.
SPARES: Gasket 0J00889J As per Crane FS Dominator Peak Pro. SPARES: Gasket 0J00889J As per Crane FS Dominator Peak Pro.
Made in Made in
Britain Every effort has been made to ensure that the information contained in this publication is accurate at the time of publishing. Crane FS Ltd assumes no responsibility or liability for
Britain
E: enquiries@cranefs.com W: www.cranefs.com TECHNICAL HELPLINE: +44 (0)1473 277400 E: TECHNICAL HELPLINE: +44
enquiries@cranefs.com (0)1473 277400
W: www.cranefs.com
26 27
Dominator
®
Dominator
®
DD40BSS4B Z9601PF Z9601PF
DN15/15 Dominator Peak Pro with PICV,
BALANCING VALVES
Dominator Peak Pro with PICV, Strainer Drain, FMD & Flushing Drains PN16
BSRIA Flushing Drain & 4-Port PN16
• Compact design, with flow and return legs at equal • Compact, pre-fabricated unit – now available with Peak Pro PICV
lengths, for simple direct mounting onto terminal unit with a wide range of settable flows to suit all applications
• Fitted with Peak Pro with a wide range of settable flows to suit • All valves are subject to both a pressure test, in accordance with BS EN
all applications 12266-1, as well as a flow limitation test, in accordance to BSRIA BTS1.
This provides reassurance of performance and accuracy within each valve
• Includes Venturi metering station for improved accuracy and
pressure drop recovery • Provides accurate flow rates & differential pressure control as well as flow
measurement (Z9601PF), system flushing and isolation
• All valves are subject to both a pressure test, in accordance with BS EN
• DZR H Body tested to 3.1X Design Working Pressure (DWP) during
12266-1, as well as a flow limitation test, in accordance to BSRIA BTS1. development for design robustness and tested to EN12516-2 to comply
This provides reassurance of performance and accuracy within each valve 1 2
with the Pressure Equipment Directive (PED)
• Bypass unit with integrated 3-way isolation valves • Fully assembled & factory tested unit reduces installation time, costs and
• Flushing valves on flow and return - in accordance with BSRIA BG29 specification risks
• Integrated dial allowing for calibrated setting of the PICV with integrated • The D995 PICV is available in 400kPa and 800kPa rated variants
test points allowing for ∆P verification • On-Off, modulating or feedback actuators are available separately
to match specification
3 4 5 6
Materials Dimensions & Weights
NOM. A B C D E F G H I WEIGHT
SIZE (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (kg) H
C D VALVE
ITEM PART MATERIAL SPECIFICATION QTY SIZE A B
A WEIGHT
(DN) (mm) (mm) (mm) (mm)
DN15 70 28 33 120 195 270 328 97 36 3.0 I (kg)
1 Bypass H-Body DN20 DZR Brass BS EN 12165 (CW602N) 1 Z9601PF DN15/15 269 214 76 83 3.4
B
2 Tailpiece DZR Brass BS EN 12165 (CW602N) 2 Z9601PF DN20/15 288 232 76 83 3.8
C
Materials D
E 3 D995 PICV DZR Brass BS EN 12165 (CW602N) 1 Z9601PF DN20/20 304 240 82 93 4.2
F
G
NO. DESCRIPTION MATERIAL QTY 4 D901 & D902 FMD DZR Brass BS EN 12165 (CW602N) 1 Z9601PF DN25/20 330 266 82 93 4.2
DZR Brass BS EN 5 D299P Strainer Drain DZR Brass BS EN 12165 (CW602N) 1 *See drawings below
1 H-Body Assembly 1
12165 (CW602N) 6 J44 Nipple DZR Brass BS EN 12164 (CW602N) 2 Note: LF variant only available in DN15
7 Drain Tee DZR Brass BS EN 12165 (CW602N) 2
2 DN15 PICV - Male Ended Std Flow 0.060 - 0.200l/s B BS EN 12165 1 Adaptors End Connections
DN15 PICV - Male Ended High Flow 0.100 - 0.370l/s C (CW602N) 8 DN20 to DN25 Adapter DZR Brass BS EN 12165 (CW602N) 2
DN15 - High Flow FMD 4.6Kvs H 9 P84 Test Points Brass BS EN 12164 (CW602N) 1
DZR Brass
DN15 - Std Flow FMD 1.6Kvs S
3 BS EN 12165 1
DN15 - Low Flow FMD 0.62Kvs L
(CW602N)
DN15 - Ultra Low Flow FMD 0.24Kvs U
DZR Brass BS EN
4 DN15 Flushing Valve 2
12165 (CW602N)
DZR Brass BS EN
5 4-Port Valve (Sized to suit specification) 1 Adaptor (A) (B)
12165 (CW602N)
DZR Brass BS EN
Compression Adaptor A 2
12165 (CW602N)
6
Solder Adaptor B
DZR Brass BS EN
2
PICV Pressure/Temperature Ratings
12165 (CW602N)
NOTE: Sealing gasket and O-rings material are EPDM TEMPERATURE (°C) 0°C to 90°C
PRESSURE (BAR) 16 Bar
OPERATING 20 - 400 (DN15 LF)
TEMPERATURE RATING: 0 to 90°C manufacturer. Unit to include a flushing bypass with integral isolation valves, PICV, Venturi style FMD and PRESSURE RATING: PN16 SPECIFICATION DZR Brass (BS EN 12165 ) fan-coil valve/terminal unit valve assembly. Preassembled to
flushing valves to comply to BG29 guidelines. Flow rate to be adjustable between 0.008 – 0.37l/s, dependent TEMPERATURE RATING: -10 to 100°C the requirements of each individual terminal unit to include a flushing by-pass with integral isolation valve.
END CONNECTIONS: on variant. Connections to be flat face union connections between components with female BSPT on system
END CONNECTIONS: Peak Pro Pressure Independent Control Valve (PICV), with options for low flow to high flow, flow measurement
H-Body - BSP Taper side and compression/solder on terminal side. Unit to be manufactured from DZR Brass to BS EN 12164/5 device, strainer, drain and pressure test points as and where specified. On-Off of modulating actuator is required
Valid as of 28/06/21
Terminal end - Compression/Solder Flushing By-pass body - BSP Taper,

Vaild as of 300718
CW602N. Valve assembly will be labelled to include the terminal unit reference number, service and flow rate. to control the PICV. Valve assembley will be labelled to include the terminal reference number and flow rate.
Strainers & Tailpieces - BSP Taper
SPARES: Gasket 0J00889J As per Crane FS Dominator Peak Pro. Generally as Crane Z9601PF Dominator Peak Pro system with PICV.
Made in
Britain Every effort has been made to ensure that the information contained in this publication is accurate at the time of publishing. Crane Ltd assumes no responsibility or liability for typographical errors or
omissions or for any misinterpretation of the information within the publication and reserves the right to change without notice.
TECHNICAL HELPLINE: +44 (0)1473 277400 TECHNICAL HELPLINE: +44 1
28 E: enquiries@cranefs.com W: www.cranefs.com E: enquiries@cranefs.com W:(0)1473 277400
www.cranefs.com 29
E: enquiries@cranefs.com W: www.cranefs.com E: enquiries@cranefs.com
Middle W: www.cranefs.com
East & North Africa Office: +971 4816 5800
Dominator Dominator
® ®
Z9701P Z9701P Z9801P Z9801P
Dominator Peak Pro Dominator Peak Pro with PICV & Strainer Drain
with PICV & Drain
BALANCING VALVES
BALANCING VALVES
Z9801PF
Z9701PF Dominator Peak Pro with PICV,
Dominator Peak Pro Strainer Drain and FMD PN16
with PICV, Drain and FMD PN16
Features & Benefits
Features & Benefits • Compact, pre-fabricated unit – now available with Peak Pro PICV with
a wide range of settable flows to suit all applications
• Compact, pre-fabricated unit – now available with Peak Pro PICV
with a wide range of settable flows to suit all applications • All valves are subject to both a pressure test, in accordance with
• All valves are subject to both a pressure test, in accordance with BS EN Z9701PFEXT BS EN 12266-1, as well as a flow limitation test, in accordance to BSRIA BTS1.
12266-1, as well as a flow limitation test, in accordance to BSRIA BTS1. This provides reassurance of performance and accuracy within each valve Z9801PFEXT
This provides reassurance of performance and accuracy within each valve • Provides accurate flow rates & differential pressure control as well as flow
• Provides accurate flow rates & differential pressure control as well as flow measurement (Z9801PF), system flushing and isolation
measurement (Z9701PF), system flushing and isolation • DZR H Body tested to 3.1X Design Working Pressure (DWP) during
• DZR H Body tested to 3.1X Design Working Pressure (DWP) during development for design robustness and tested to EN12516-2 to comply with
development for design robustness and tested to EN12516-2 to comply the Pressure Equipment Directive (PED)
with the Pressure Equipment Directive (PED) • Fully assembled & factory tested unit reduces installation time, costs and
• Fully assembled & factory tested unit reduces installation time, costs and specification risks
specification risks
• Available with and without extension stems to suit customer specification
• Available with and without extension stems to suit customer specification
• Available in 400kPa & 800kPa rated variants
• Available in 400 kPa & 800 kPa rated variants
• On-Off, modulating or feedback actuators are available separately
• On-Off, modulating or feedback actuators are available separately to match
to match specification specification

NO. PART MATERIAL SPECIFICATION SIZE A B C D VALVE
A B C D VALVE
(DN) (mm) (mm) (mm) (mm) WEIGHT (kg) NO. PART MATERIAL SPECIFICATION SIZE (DN) WEIGHT
(mm) (mm) (mm) (mm) (kg)
1 Bypass H-Body DZR Brass BS EN 12165 (CW602N) Z9701P 15/15 160 138 60 67 2.0 1 Bypass H-Body DZR Brass BS EN 12165 (CW602N) Z9801P 15/15 160 148 76 67 2.15
2 Tailpiece DZR Brass BS EN 12164 (CW602N) Z9701P 20/15 179 157 60 67 2.61
2 D299P Strainer Drain DZR Brass BS EN 12165 (CW602N) Z9801P 20/15 184 173 76 67 2.54
3 D995 PICV DZR Brass BS EN 12165 (CW602N) Z9701P 20/20 192 168 66 77 2.98 Z9801P 20/20 197 178 82 77 2.91
3 D995 PICV DZR Brass BS EN 12165 (CW602N)
4 D342 Drain Bronze BS EN 1982 (CC491K) Z9701P 25/20 218 194 66 77 3.28 Z9801P 25/20 197 178 82 77 2.91
4 Tailpiece DZR Brass BS EN 12164 (CW602N)
5 D901/ D902 FMD DZR Brass BS EN 12164 (CW602N) Z9701P 25/25 254 218 67 77 4.53 Z9801P 25/25 248 224 89 77 4.22
5 D901/ D902 FMD DZR Brass BS EN 12164 (CW602N)
Z9801PF 15/15 204 148 76 67 2.35
Z9701PF 15/15 204 138 60 67 2.2
Z9801PF 20/15 229 173 76 67 2.75
Z9701PF 20/15 223 157 60 67 2.75
Z9801PF 20/20 241 178 82 77 3.21
Z9701PF 20/20 236 168 66 77 3.21 Z9801PF 25/20 261 198 82 77 3.51
Dimensional Drawings Z9701PF 25/20 262 194 66 77 3.58 Z9801PF 25/25 298 224 89 77 4.55
[Left-hand configuration shown, other
Z9701PF 25/25 303 218 67 77 4.86
configurations available on request] (Standard configuration shown)
PRESSURE RATING: PN16 SPECIFICATION DZR Brass (BS EN 12165) fan-coil valve/ terminal unit valve assembly. Preassembled to the
PRESSURE RATING: PN16 SPECIFICATION DZR Brass (BS EN 12165 ) fan-coil valve/terminal unit valve assembly. Preassembled to the requirements of each individual terminal unit to include a flushing by-pass with integral isolation valves, Peak
TEMPERATURE RATING: -10 to 100°C
TEMPERATURE RATING: -10 to 100°C requirements of each individual terminal unit to include a flushing by-pass with integral isolation valves, Peak Pro Pressure Independent Control Valve (PICV), with options for low flow to high flow, flow measurement
END CONNECTIONS:
END CONNECTIONS: Pro Pressure Independent Control Valve (PICV), with options for low flow to high flow, flow measurement device, strainer, drain and pressure test points as and where specified. Extended handles will be fitted for
Flushing By-pass body - BSP Taper,
Flushing By-pass body - BSP Taper, device, drain and pressure test points as and where specified. Extended handles will be fitted for Chilled Water Chilled Water applications. On-Off or modulating actuator is required to control the PICV. Valve assembly
Strainers & Tailpieces - BSP Taper
Valid as o250920
Valid as of 250920
Strainers & Tailpieces - BSP Taper applications. On-Off, feedback or modulating actuator is required to control the PICV. Generally as Crane FS will be labelled to include the terminal unit reference number and flow rate. Generally as Crane FS Z9801P &
Z9701P & Z9701PF Dominator Peak Pro system with PICV. Z9801PF Dominator Peak Pro system with PICV.
Every effort has been made to ensure that the information contained in this publication is accurate at the time of publishing. Crane Ltd assumes no responsibility or liability for typographical errors or Every effort has been made to ensure that the information contained in this publication is accurate at the time of publishing. Crane Ltd assumes no responsibility or liability for typographical errors or
omissions or for any misinterpretation of the information within the publication and reserves the right to change without notice. omissions or for any misinterpretation of the information within the publication and reserves the right to change without notice.
TECHNICAL HELPLINE: +44 (0)1473 277400 1 TECHNICAL HELPLINE: +44 1
30 E: enquiries@cranefs.com W: www.cranefs.com E: enquiries@cranefs.com W:(0)1473 277400
www.cranefs.com 31
Middle East & North Africa Office: +971 4816 5800 E: enquiries@cranefs.com W: www.cranefs.com E: enquiries@cranefs.com
Middle W: www.cranefs.com
East & North Africa Office: +971 4816 5800
INSULATION JACKET 300MM INSULATED

FOR Z9801P & Z9801PF BRAIDED HOSES
DN15 to DN25 DN15 to DN25

Compact insulation solution - resulting in high • Flexible design of the hose enables the connection between
performance, energy saving valves. the fan coil unit and the pump with using no additional
fitting requirement (elbows etc.), reducing the time spent on
• Installation - Easy to install & remove.
assemblies and overall cost.
When servicing or inspection is required the Hook & Loop
• Insulated hoses prevent sweating which may exist in heating
fastenings & pull string allow easy access or removal.
and cooling systems.
• Sustainability - Removable and reusable, the jackets are a
• Braided hoses reduce noise and vibration.
fantastic way to help protect the environment.
Insulation hoses are offered as a separate item and are • Special welding process prevents potential corrosion caused
Insulating the Dominator with a jacket instead of hard not covered in this data sheet.
by moisture around the connection points.
insulation prevents unnecessary waste being discarded once
• Available in male x male and male x female configurations.
removed for servicing or inspection.
Care instructions: • Hose Length: 300mm
• Footprint - Designed to be compact with a small foot print.
• Temperature Range: -270/600°C
Ensures storage and shipping emissions are reduced When installing insulation jackets sometimes
throughout the supply chain. they can become dirty, sticky, or dusty. • Insulation Thickness: 9mm
• Energy Saving - Saves money on energy bills. • Tube Material: Stainless Steel AISI 304
Compared to hard insulation versions, the jacket significantly • Wash with mild soap or detergent • Hose Material: EDPM
mixed with warm water.
reduces the gaps around the valve, reducing heat loss & • Connections: Carbon Steel/Stainless Steel
increasing system efficiency. 3 • Rinse with clean water adequately.
• Wipe the surface completely clean
• Safety - Fire Safety rating BS EN13501-1 Class A1 with dry cloth or dry towel.
We pride ourselves on providing the highest safety rating on
• Do not leave any water stains
the market. or markings on the surface of
• Performance - 72hr continuous ambient temperature the jacket.
testing. • Do not use abrasive cleaners that

will scratch the surface.*
Rigorous steam ambient testing to ensure the jacket gives
you the highest performance. 7 • Do not use Steel Wool /
Steel Brushes.
• Do not drag rough items across
the surface.
Item Material Properties • Do not use Bleach or other cleaners
that contain chlorine.
• 25mm Thick Glass Wool
Insulating • Fire Protection to BS EN13501-1 Class A1
Material • Thermal Conductivity (0.034 W/mK at 0°C *scratches are not visible depending on what has scratched it.
to 0.042 W/mK at 50°C) BS EN12667
Part Numbers
• 25mm Thick Glass Wool
Covering
• Fire Protection to BS EN13501-1
Insulation Jacket for Z9801P Dominator without FMD
• 100% Polyamide
Hook Size Part Number
• Woven with cold cutting sewing edges
& Loop
• Temperature range -30°C to 140°C
DN15 0JG93322D
PN16 Rated
• Braided Spun Polyester Cord Part Number Description Hose I/D Threaded Connection I/D Connections
Pull Cord DN20 0JG93323E
• Melting point 230°C
DN25 0JG93324F 0JG93462Q DN15x15 MxM 15mm 15mm 1/2” BSP male x 1/2” BSP male
Weather Resistance
0JG93463R DN20x20 MxM 19mm 19mm 3/4” BSP male x 3/4” BSP male
ISO Accreditations
Insulation Jacket for Z9801PF Dominator with FMD 0JG93464S DN25x25 MxM 25mm 25mm 1” BSP male x 1” BSP male
ISO 20340:2009 – performance requirements for protective paint systems for
offshore Structures for 4,200 hours in cycles of Size Part Number 1/2” BSP male x 1/2” BSP
0JG93465T DN15x15 MxF 15mm 15mm
• 72 hours accelerated UV weathering ISO 11507 female
DN15 0JG93458U
• 72 hours neutral salt spray exposure ISO 9227
3/4” BSP male x 3/4” BSP
• 24hrs stead state low- temperature testing at -20°C DN20 0JG93459V 0JG93466U DN20x20 MxF 19mm 19mm
female
DN25 0JG93460N 0JG93467V DN25x25 MxF 25mm 25mm 1” BSP male x 1” BSP female
Weatherproofing
Valid as of 050822
Valid as of 240822
Tested in extreme
weather conditions
Every effort has been made to ensure that the information contained in this publication is accurate at the time of publishing. Crane FS Ltd assumes no responsibility Made in Made in Every effort has been made to ensure that the information contained in this publication is accurate at the time of publishing. Crane FS Ltd assumes no responsibility
or liability for typographical errors or omissions or for any misinterpretation of the information within the publication and reserves the right to change without notice. Britain Britain or liability for typographical errors or omissions or for any misinterpretation of the information within the publication and reserves the right to change without notice.
32 33
ACTUATORS ACT991M / ACTD995FB /

ACTD995FS / ACT991TP
ACT991TH
ACT991M / ACTD995FB /
ACTUATOR OPTIONS ACTD995FS / ACT991TP /
ACT991TH
Electro-Mechanical Actuators –
Modulating Features & Benefits
Forced convection (active) terminal units, i.e. FCU (Fan • ACT991M is a modulating actuator providing proportional (equal
percentage) control. This now includes a stem gap detection
Coil Units) and active Chilled Beams are designed to
innovation, which reduces onsite adjustments and results
be very responsive to changes in room temperature. in easier installation and commissioning. The gap detection
Modulating actuators enable flow rate changes, and feature matches the stroke length of the valve during calibration, Dimensional Drawing
ensuring the actuator conversion to equal percentage is
consequently heat output changes, to quickly match accurate and gives the desired flow control across all valve ACT991M / ACTD995FB / ACTD995FS / ACT991TP
C
demand requirements, therefore, modulating actuators settings for the operating differential pressure range.
should be chosen for forced convection terminal units. • ACTD995FB is a Feedback actuator allowing proportional
control with 0-10V with position feedback signal function.
Modulating actuators allow all intermediate flow rates • ACTD995FS is a Fail Safe actuator designed to protect the 79.5
between full flow and no flow. equipment and the system from damage, while enhancing A
overall efficiency
Fail Safe • ACT991TP is a 3-point actuator (or floating point)
electromechanical actuator for use where thermal actuators
ACTD995FS is a Fail Safe actuator designed to protect are not suitable.
the equipment and the system from damage, while • ACT991TH is a thermal actuator designed for ON/OFF control.
enhancing overall efficiency. Thermal actuators are small, light, and therefore a good choice
for confined spaces.
In the event of a disruption to the power supply the • All feature an LED for the indication of the operating status*.
* Excludes ACT991TH
actuator will drive either open or closed, powered by an
Materials
internal super capacitor. B
Material
Feedback The failsafe actuator can be fully configured using the Cover Thermoplastic
ACT991TH
ACTD995FB is a Feedback actuator allowing user-friendly configuration tool (available separately). Yoke PA66 - Glass Mineral filled
modulating control with 0-10V positional feedback Thread Nut

Brass CuZn40Pb2
B C
Failsafe models include 0-10V positional feedback Thermoplastic - ACT991TH Only
signal function.
signal function.
The feedback signal can be used by an external Cable A B C Weight
Fig No. Length (mm) (mm) (mm) (kg)
monitoring system to compare with control signal in A
ACT991M
order to check for ensure system is functioning correctly.
ACTD995FB
1.5m 79.5 80 49 0.2
ACTD995FS
Application Fig No. Part No Function Voltage Cable Length IP Rating PICV SIZE
ACT991TP
MODULATING GAP
ACT991M 0EA08739E ACT991TH 0.65m 70 46 38.5 0.1
DETECTION
FEEDBACK
ACTD995FB 0JG93140Y MODULATING GAP 24VAC/DC
Technical Specification
FAN COIL UNIT &
ACTIVE CHILLED DETECTION
(0-10V CONTROL Actuator Power Control Control Nominal Stroke Running Protection
BEAMS SIGNAL) Configurations Connections Calibration
Type Supply Signal Type Force Length Time Class
0JG93442L (OPEN) FAIL SAFE
MODULATING 1.5m IP54 DN15-50 ACT991M 0 - 10V DC Direct acting 140N
ACTD995FS
0JG93443M GAP DETECTION 0 - 5V DC
(OPEN/ CLOSED) ACTD995FB 24VAC/DC Direct acting Proportional 8 sec/mm
(CLOSED) 2 - 10V DC 160N
ACTD995FS Reverse acting 6.3mm max IP54
4 - 20mA Self
0EA08740W (24V) M30 x 1.5 Calibrating
FAN COIL UNIT ACT991TP 3 POINT FLOATING Raise /
ACT991TP 24VAC/DC 140N 13 sec
Lower
0JG92774A (230V) (230V N/A N/A
Valid as of 200922
24VAC/DC 4mm max
ACT991TH Available) ON/OFF 170N 5 min IP44
or 230V (nominal)
0JG93474U (24V)
PASSIVE THERMAL ON/OFF
ACT991TH 0.65m IP44 DN15-25
CHILLED BEAMS (NORMALLY CLOSED)
0JG93475V (230V) Every effort has been made to ensure that the information contained in this publication is accurate at the time of publishing. Crane FS Ltd assumes no responsibility
or liability for typographical errors or omissions or for any misinterpretation of the information within the publication and reserves the right to change without notice.
34 35
To visit our Video Library go to:
www.youtube.com/user/CraneBSU
Made in
Britain
FM 00311 EMS 553775
CRANE HOUSE, EPSILON TERRACE, MIDDLE EAST & NORTH AFRICA
WEST ROAD, IPSWICH, SALES OFFICE,
SUFFOLK IP3 9FJ BUILDING 4, OFFICE 901,
TELEPHONE: +44 (0)1473 277300 THE GALLERIES, PO BOX 17415,
FAX: +44 (0)1473 277301 DOWNTOWN JEBEL ALI
DUBAI, UAE
www.cranefs.com TELEPHONE: 5800 816 4(0) 971+
CFS_PICV_PP_1022
• Designed and manufactured under quality management systems in accordance with BS EN ISO 9001.
Every effort has been made to ensure that the information contained in this publication is accurate at the time of publishing. Crane Fluid
Systems assumes no responsibility or liability for typographical errors or omissions or for any misinterpretation of the information within
this publication and reserves the right to change without notice. We hope that our communications have an impact on you, but not on the
environment. We have taken steps to ensure this leaflet is printed on FSC material and the paper is made by a totally chlorine free process.
www.cranebsu.com

Variable Flow PICV - Case Study

Uploaded by

Copyright:

Available Formats

Variable Flow PICV - Case Study

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Variable Flow PICV - Case Study

Uploaded by

Copyright:

Available Formats

PICV &

Including the NEW

16 Dominator Eco CONTRACTORS

WHY CHOOSE THE CRANE FS PICV?

SIMPLE FLOW SETTING DIAL

HOW DOES THE CRANE FS PICV WORK? TECHNICAL DESCRIPTION SUMMARY

1. Differential Pressure Control APPLICATION DIFFERENTIAL VARIANTS /

4. Thermostat, BMS, PICV &

EXAMPLE FLOW PERFORMANCE GRAPHS Features & Benefits

*DN15 LF Class 3 **based on two full stroke cycles per day 9

DN15 PICV Low Flow Limitation Test

DN15 20-400 25-400 40-400

Features & Benefits

• Smaller and lighter design suits applications with a small footprint

FEATURES & BENEFITS

savings & lower running costs. 11 Stem Stainless Steel 303

• Excellent performance coverage from the

specified, compared to using larger sized A B C C2 D Weight

• Reductions in weight and footprint allow the 8

valves to be used within smaller voids. Flow Range 3

STD Flow (l/s) High Flow (l/s)

Pressure/Temperature Ratings Differential Pressure Range

Features & Benefits

• Integral test points for verification of ∆P and valve performance

*based on two full stroke cycles per day

No. Part Material

The impact of high hysteresis can result in an Dimensions & Weights

for the end user and ultimately reducing energy

Features & Benefits

103 Colmore Row, Birmingham

No. Part Material Specification

1 Body Ductile Iron EN-GJS-450-10 (GCD450)

DN50 254 139 154 101 291 165 50 33 20

PRESSURE RATING: PN16 FLOW ACCURACY: +/-10%

Reduced Embodied Carbon

100% Recyclable Packaging

Focused on sustainability the digital datasheet and installation

Carbon footprint weight of one Grizzly Bear!

2 End Connection Sub-Assembly DZR Brass BS EN DZR Brass BS EN

NOTE: Sealing gasket and O-rings material are EPDM

PICU Pressure PICU Pressure

Features & Benefits Features & Benefits

End Connections End Connections

DZR Brass BS EN DZR Brass BS EN

Features & Benefits London, UK

2 Drain Tee Assembly – Male Captive DZR Brass BS EN

3 4-Port Valve DZR Brass BS EN

4 Adaptor 4-Port DZR Brass BS EN

Features & Benefits

Dimensions & Weights

DN15 70 27 33 120 179 2.0 Available in standard or reverse handed orientations.

temperature and pressure control.

DN15 - High Flow FMD 4.6Kvs H

NOTE: Sealing gasket and O-rings material are EPDM

TECHNICAL HELPLINE: +44 (0)1473 277400

Features & Benefits Features & Benefits

calibrated setting of the PICV with

range of settable flows to suit all DO NOT SCALE UNCONTROLLED COPY

test points allowing for ∆P verification flow limitation test, in accordance

performance and accuracy within hydronic equipment such as 66 33 44 55