Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 188 views

    Minor Electrical Installation Works - Red

    Uploaded by

    Seby Sebastian
    This document is a Minor Electrical Installation Works Certificate used to certify that minor electrical works have been completed in accordance with British Standard BS 7671. It contains four parts: (1) details of the minor works, (2) details of the modified circuit, (3) inspection and testing results, and (4) a declaration signed by the approved contractor. The certificate confirms the minor works do not impair safety and were designed, constructed, inspected and tested per the wiring regulations. It should be retained by the recipient and passed to future owners.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as ODT, PDF, TXT or read online from Scribd

    Minor Electrical Installation Works - Red

    Uploaded by

    Seby Sebastian
    188 views2 pages
    This document is a Minor Electrical Installation Works Certificate used to certify that minor electrical works have been completed in accordance with British Standard BS 7671. It contains four parts: (1) details of the minor works, (2) details of the modified circuit, (3) inspection and testing results, and (4) a declaration signed by the approved contractor. The certificate confirms the minor works do not impair safety and were designed, constructed, inspected and tested per the wiring regulations. It should be retained by the recipient and passed to future owners.

    Copyright

    © Attribution Non-Commercial (BY-NC)

    Available Formats

    ODT, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document is a Minor Electrical Installation Works Certificate used to certify that minor electrical works have been completed in accordance with British Standard BS 7671. It contains four parts: (1) details of the minor works, (2) details of the modified circuit, (3) inspection and testing results, and (4) a declaration signed by the approved contractor. The certificate confirms the minor works do not impair safety and were designed, constructed, inspected and tested per the wiring regulations. It should be retained by the recipient and passed to future owners.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as ODT, PDF, TXT or read online from Scribd
    Download as odt, pdf, or txt
    188 views2 pages

    Minor Electrical Installation Works - Red

    Uploaded by

    Seby Sebastian
    This document is a Minor Electrical Installation Works Certificate used to certify that minor electrical works have been completed in accordance with British Standard BS 7671. It contains four parts: (1) details of the minor works, (2) details of the modified circuit, (3) inspection and testing results, and (4) a declaration signed by the approved contractor. The certificate confirms the minor works do not impair safety and were designed, constructed, inspected and tested per the wiring regulations. It should be retained by the recipient and passed to future owners.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as ODT, PDF, TXT or read online from Scribd
    Download as odt, pdf, or txt
    of 2

    MINOR ELECTRICAL INSTALLATION WORKS CERTIFICATE

    (Requirements for electrical installations BS 7671 (IEE Wiring Regulations)


    To be used only for minor electrical work which does not include the provision of a new circuit

    Original Certificate
    Client:

    Date Minor Works Completed

    Certificate reference
    Details of departures from BS 7671 (as amended)

    PART 1: DETAILS OF THE MINOR WORKS

    Description of the minor works

    Location/address of the minor works

    PART 2: DETAILS OF THE MODIFIED CIRCUIT


    System type and earthing arrangement TN-C-S TN-S TT TN-C IT

    Protective measure(s) against electric shock Overcurrent protective device for the modified circuit Residual current device (if applicable) Details of wiring system used to modify the circuit BS(EN) BS(EN) Type Type Type Reference method s csa of lives Rating A mA mm
    2

    I n
    Csa of cpc

    mm2

    Where the measure for protection against electric shock is ADS, insert maximum disconnection time permitted by BS 7671: 2008 Comments, if any, on existing installation:

    Maximum Zs permitted by BS 7671

    PART 3: INSPECTION AND TESTING OF THE MODIFIED CIRCUIT AND RELATED PARTS
    Confirmation that necessary inspections have been undertaken

    Essential inspections and tests

    () M M M M

    Confirmation of the adequacy of earthing Confirmation of the adequacy of protective bonding Confirmation of correct polarity Maximum measured earth fault loop impedance, Zs RCD operating time at I n (if RCD fitted)

    () () () ms ms

    Circuit resistance R1 + R2

    or

    R2

    Insulation resistance: (* In a multi-phase circuit, record the lower value, as appropriate)

    Line/Line* Line/Neutral*

    Line/Earth* Neutral/Earth

    RCD operating time at 5I n, if applicable

    Agreed limitations, if any, on the inspection and testing:

    PART 4: DECLARATION
    I/We certify that the minor electrical installation works, as detailed in part 1 of this certificate, does not impair the safety of the existing installation, that the said works have been designed, constructed, inspected, tested and verified in accordance with BS 7671 amended on the date shown* and that to the best of my/our knowledge and belief, at the time of my/our inspection, the works complied with BS 7671:2008 except as detailed in Part 1 of this certificate. * Name (CAPITALS) Signature Position Date NICEIC Enrolment Number Branch Number (if applicable) ------------------------------For and on behalf of (Trading Title of Approved Contractor) Address and Postcode

    Report reference: 69608661.odt

    Report pages including inspection and test schedules 1 of 2

    NOTES FOR RECIPIENT THIS CERTIFICATE IS A VALUABLE DOCUMENT AND SHOULD BE RETAINED FOR FUTURE REFERENCE
    This Certificate has been issued to confirm that the electrical installation work to which it relates has been designed, constructed and inspected and tested in accordance with British Standard 7671, (IEE Wiring Regulations.) You should have received an original Certificate and the contractor should have retained a duplicate. If you were the person ordering this work, but not the owner of the installation, you should pass this certificate, or a copy of it, to the owner. The Minor Works Certificate is only to be used for additions, alterations or replacements to an installation that do not extend to the provision of a new circuit. Examples include the addition of a socket outlet or lighting point to an existing circuit, or the replacement or relocation of a light switch. A separate Certificate should have been received for each existing circuit on which minor works have been carried out. This Certificate is not valid if you requested the contractor to undertake more extensive installation work. An electrical Installation Certificate would be required in such circumstances. The original Report is to be retained in a safe place and be shown to any person inspecting or undertaking further work on the electrical installation in the future. If you later vacate the property, this Certificate will demonstrate to the new owner that the minor electrical installation work was carried out complied with the requirements of British Standard 7671 at the time the Certificate was issued.
    A PVC/PV C CABLES B PVC CABLES IN METALLIC CONDUIT C PVC CABLES IN NONMETALIC CONDUIT D CODES FOR TYPES OF WIRING E F PVC CABLES IN NONMETALIC TRUNKING PVC/SWA CABLES G XLPE/SWA CABLES H MINERALINSULATED CABLES O (other please state)

    PVC CABLES IN METALIC TRUNKING

    Report reference: 69608661.odt

    Report pages including inspection and test schedules 2 of 2

    You might also like