ALLIED FILTER SYSTEMS LTD RECOGNISES

ENVIRONMENTAL MANAGEMENT AS AMONG THE

HIGHEST PRIORITIES WITHIN THE BUSINESS.

Our working practices minimise waste impacts of our business and work with There are no implied warranties, including the implied
warranty of merchantability and fitness for a particular
generation and resource consumption to our suppliers and customers to help
purpose not specific herein respecting this agreement
safeguard the environment. We continually develop more environmentally friendly or the product being sold here under or the service
assess and improve the environmental processes and products. provided herein.

This brochure has been printed on paper manufactured from renewable timber, produced on a fully sustainable basis and is suitable for recycling.
The pulp used in this paper has been bleached by an elemental chlorine free process (ECF).

3 UK manufacturing sites and Sales Offices in the UK, France, Sweden and Singapore.

HEAD OFFICE
Huntsman Drive, Northbank Industrial Park, Irlam, Manchester, M44 5EG
Tel: +44 (0) 161 777 9500, Fax: +44 (0) 161 777 9506
E: sales@alliedfilter.co.uk FM 36648

FILTER
www.alliedfilter.co.uk
Visit us for the most up-to-date product, services and company information.
www.alliedfilter.se / www.alliedfilter.fr / www.alliedfilter.sg
CARTRIDGES
TABLE CARTRIDGE STANDARD
OF CONTENTS F I LT E R S & V E S S E L S END CAPS
ALLIED FILTER SYSTEMS LTD OFFERS A RANGE OF HIGH QUALITY ALL FILTER CARTRIDGES ARE OFFERED WITH A RANGE OF INDUSTRY STANDARD
INTRODUCTION AND CARTRIDGE FILTERS AND VESSELS FOR PROCESS INDUSTRIES. END CAPS. THEY ARE COMPATIBLE WITH EXISTING FILTER HOUSINGS AS WELL
2 CENTRE CORES TYPICAL APPLICATIONS INCLUDE FILTRATION OF WATER, AS NEW INSTALLATIONS FOR WHICH WE ARE ABLE TO RECOMMEND THE MOST
CHEMICALS, PAINTS AND COATINGS, FOOD, BEVERAGES, SUITABLE CONFIGURATION FOR YOUR APPLICATION.
PETROCHEMICALS AND PHARMACEUTICALS.
3 STANDARD END CAPS
Cartridge filters are one of the most widely used technologies for filtration of liquids
and gases. They can either be used on their own, or as final filters in conjunction
4 WOUND with other methods of liquid filtration such as bag filters.

Selecting the correct cartridge filter and system size is essential to optimize
MELT BLOWN the performance of your filtration system. When making a recommendation,
6 PROXIS T, A we will consider all the required process parameters such as the amount, type
and size of particles to be removed, the fluid flow rate, chemical and temperature
compatibility with the filter, fluid viscosity and the permitted pressure drop across
8 MELT BLOWN PROXIS HF, N
the filtration system.

10 HC SERIES Filter cartridges can be used for applications which require a particle
size retention rating of 150 micron and lower and especially for
processes which require sub-micron particle retention.
11 RESIN BONDED
They are typically used for processes where the contaminant levels are in the range
of <1 to 100ppm (0.0001% - 0.01%) for continuous flow applications and up to
12 PAINT PACK 1000 ppm (0.1%) for smaller batch size operations.

Allied Filter Systems Ltd. has been at the forefront of the liquid filtration
14 PLEATED industry for several decades. We are able to draw upon many years of expertise DOUBLE OPEN CODE 3 CODE 7 CODE 8
and experience to provide our clients with industry leading technical advice ENDED 2 x 222 2 x 226 2 x 222
and recommendations, as well as providing exceptional service and account
16 HIGH FLOW PLEATED
management. We look forward to discussing your filtration needs.
Can be supplied with O-rings/flat O-rings with O-rings/spear
or without flat seals locking lugs/spear

18 MULTIFINE

19 PES MEMBRANE
CENTRE CORES
Many cartridges are fitted with a centre core
to provide mechanical stability for the filter
20 CARBON media, whilst the large open area does not
restrict the flow. Cores are available
22 OIL ABSORBENT in a variety of materials and designs in
accordance with the needs of your application.

23 METALLIC SEAM WELDED PERFORATED CORE

POLYPROPYLENE CORE
SPIRAL CORE

ALL FILTER CARTRIDGES ARE MANUFACTURED

TO ISO9001 QUALITY STANDARDS.
OTHER INDUSTRY STANDARD END CAP FITTINGS
ARE AVAILABLE ON REQUEST.
3
WOUND
F I LT E R C A R T R I D G E S
WOUND FILTER CARTRIDGES ARE Wound cartridges are most commonly Available in a wide range of micron O-rings for end caps include Nitrile, EPDM,
ECONOMICAL, NOMINAL RATED made from polypropylene yarn ratings from 0.5 – 150. Silicone, Viton, PTFE encapsulated viton, PTFE
DEPTH FILTERS. wound on to a polypropylene core, encapsulated silicone.
Standard length:
but for applications where chemical
They are produced from a continuous 4 7/8” to 40”. Washed or fibrillated polypropylene also
compatibility or operating temperature
fibre yarn spirally wound around a available for sensitive applications.
restricts the use of polypropylene, other Custom lengths up to 60” possible.
central support core.
fibres such as cotton, glass, polyester, Maximum recommended
Standard diameter:
The computer controlled winding nylon or polyphenylene sulphide (Ryton) differential pressure:
I.D. 27.5mm, O.D. 62mm.
pattern ensures precise, reliable and can be offered wound on to a stainless 2.5 Bar.
repeatable particle removal performance. steel core. We also offer the option of Available in large 110mm diameter,
Wound filters feature a graded density a glass reinforced polypropylene core 10” and 20” lengths for higher flow
construction, enabling progressively which provides superior strength and rates and dirt holding capacity.
smaller particles to be captured through permits higher operating temperatures
Most commonly double open ended,
the depth of the filter media. The result (up to 100oC)
but can be fitted with all industry
is a high dirt holding capacity filter which
standard end caps.
has a low pressure drop.

PRESSURE DROP BAR 3 PSID WP-1BB WP-5BB WP-1

WP-10BB
DATA OBTAINED
USING WATER AT 0.2 WP-25BB
20ºC PER 10” FILTER
2

PRESSURE DROP
WP-50BB

0.1

WP-5
WP-10
WP-25
WP-50
0.0 WP-75
WP-100
0 5 10 15 20
FLOW RATE (L/MIN)

WOUND FILTERS ARE PRODUCED FROM A CONTINUOUS FIBRE YARN

SPIRALLY WOUND AROUND A CENTRAL SUPPORT CORE.
HIGH DIRT HOLDING CAPACITY FILTERS WITH A LOW PRESSURE DROP.
5
MELT BLOWN
CARTRIDGES

PROXIS T & PROXIS A SERIES

Proxis T series cartridges are nominal rated with a Available in a wide range of micron ratings from 0.5 – 150.
particle removal efficiency of 90% at the designated
micron rating.
Standard length:
4 7/8” to 40”. PROXIS T
Proxis A series cartridges are absolute rated Custom lengths up to 60” possible. FLOW RATE VS DIFFERENTIAL
with a particle removal efficiency of 99.9% at the PRESSURE FOR PROXIS T
designated micron rating. Standard diameter: I.D. 27.5mm, O.D. 63.5mm. CARTRIDGES. PRESSURE DROP
Proxis T and Proxis A cartridges have a 100% polypropylene Available in large 110mm diameter, 10” and 20” lengths INCLUDES THAT DUE TO THE
construction, and feature an inner core to enhance mechanical for higher flow rates and dirt holding capacity. FILTER HOUSING.
strength. They have a graded density structure, and have no
Can be fitted with all industry standard end caps.
contaminant downloading even at high differential pressures. Water flow rate per 10”module Water flow rate per 10”module
O-rings for end caps include Nitrile, EPDM, Silicone, Viton, 0.6
0.5µm
0.06
15µm

PRESSURE – BAR

PRESSURE – BAR
PTFE encapsulated Viton, PTFE encapsulated Silicone. 1µm
0.5 0.05 25µm
Maximum recommended differential pressure: 0.4 Water flow rate per 10”module
3µm
0.04 Water flow rate per 10”module
40µm
75µm
2.6 Bar (1 Bar @ 82°C, 2 Bar @ 66°C, 4.2 Bar @ 24°C). 0.5µm 15µm
0.6 0.06 100µm
0.3 0.03

– BAR

– BAR
150µm
1µm

DIFFERENTIAL

DIFFERENTIAL
5µm
Maximum recommended temperatures: 0.5
0.2 0.05
0.02 25µm

DIFFERENTIAL PRESSURE

DIFFERENTIAL PRESSURE
3µm
10µm 40µm
59°C – double open ended versions 0.4
0.1 0.04
0.01 75µm
82°C – all single open ended versions. 0.3
0 0.03
0
100µm
150µm
0 5 10 15 20 25 30 35 5µm 0 5 10 15 20 25 30 35
0.2 FLOW RATE (L/MIN) 0.02 FLOW RATE (L/MIN)
10µm
0.1 0.01
Cartridges will easily rinse-up
to 18 Megohm-cm.
PROXIS A
0 0
0 5 10 15 20 25 30 35 0 5 10 15 20 25 30 35
FLOW RATE (L/MIN) FLOW RATE (L/MIN)
Toxicity:
Cartridges are appropriate for use in FLOW RATE VSrate
Water flow DIFFERENTIAL
per 10”module PRESSURE FOR PROXIS Water
A CARTRIDGES.
flow rate per 10”module

pharmaceutical applications. Components PRESSURE

0.5
DROP
0.5µm INCLUDES
1µm THAT
3µm DUE TO
5µm
THE FILTER
0.05
HOUSING.

PRESSURE – BAR

PRESSURE – BAR
40µm
meet USP-XXIII, Class VI criteria. 50µ
0.4 0.04
70µm
Water flow rate per 10”module Water flow rate per 10”module 90µm
Purity: 0.3 0.5µm 1µm 3µm 0.03 120µm
Proxis cartridges are made from polypropylene 0.5 5µm 0.05

– BAR

– BAR
10µm 40µm
0.2 0.02

DIFFERENTIAL

DIFFERENTIAL
resin meeting FDA regulation 21 CFR 0.4 15µm 0.04 50µ

DIFFERENTIAL PRESSURE

DIFFERENTIAL PRESSURE
70µm
177.1520. No binders, lubricants or anti-static 0.1 20µm 0.01 90µm
0.3 0.03 120µm
agents are used in the manufacturing process. 0 0
10µm
0.2 0 5 10 15 20 25 30 35 0.02 0 5 10 15 20 25 30 35
FLOW RATE (L/MIN) 15µm FLOW RATE (L/MIN)
0.1 20µm 0.01

0 0
0 5 10 15 20 25 30 35 0 5 10 15 20 25 30 35
PROXIS CARTRIDGES CAN BE FITTED WITH FLOW RATE (L/MIN) FLOW RATE (L/MIN)
ALL INDUSTRY STANDARD END CAPS.

ALL FILTER CARTRIDGES ARE MANUFACTURED

TO ISO9001 QUALITY STANDARDS.
GRADED DENSITY STRUCTURE WITH NO CONTAMINANT DOWNLOADING
EVEN AT HIGH DIFFERENTIAL PRESSURES. 7
 FLOW RATE VS DIFFERENTIAL PRESSU
FOR PROXIS N SERIES - PER 10” CAR

PROXIS PROXIS
HF SERIES N SERIES
Proxis HF are designed to perform depth 100% polypropylene construction. PROXIS N SERIES CARTRIDGES MAXIMUM OPERATING CONDITIONS
filtration whilst handling a high flow-rate. TWO ZONE FILTRATION ARE NOMINAL RATED WITH A
Available micron ratings
STRUCTURE WHERE PARTICLE REMOVAL EFFICIENCY MAXIMUM RECOMMENDED P
They feature a two zone filtration 1, 5, 10, 20, 40. OPERATING
A PRE-FILTER AND FINAL OF 95% AT THE DESIGNATED TEMPERATURE
structure where a pre-filter and final STEEL CORE NYLON CORE
Dimensions : FILTER ARE COMBINED MICRON RATING.
filter are combined in a single element.
114.3mm I.D. x 152.4mm O.D. IN A SINGLE ELEMENT
The large internal diameter minimizes Manufactured from 100% Nylon fibres, 20ºC 4.0 Bar 4.0 Bar
differential pressure and consequently Length : they are ideally suited to applications such
a reduced number of elements compared 20” or 40”. as filtration of solvents, solvent based 50ºC 4.0 Bar 3.0 Bar
to using conventionally sized cartridges paints and coatings and petrochemicals.
Max differential pressure:
is required for large flow rate applications. They are not recommended for use with 80ºC 4.0 Bar 1.0 Bar
4.2 Bar at 20oC.
Therefore the required filter housing will be water based products.
smaller, reducing capital investment. Max temperature: 150ºC 4.0 Bar 0.5 Bar
Available in a wide range of micron
For example, 40” Proxis HF cartridges 60oC.
ratings from 1 – 200.
can handle flow rates of 300 -800 L/min
depending on micron rating and permitted Standard length: FLOW RATE VS DIFFERENTIAL PRESSURE
pressure drop. 9 ¾” to 40”. FOR PROXIS N SERIES - PER 10” CARTRIDGE.

Proxis HF cartridges are “coreless” filter Standard diameter: 1 m

elements, and mechanical strength is I.D. 28mm, O.D. 64mm. 0.80 5- 10 m

provided by an internal perforated tube Inner core options: 0.70

located within the filter housing. Nylon, Tinned Steel, Stainless Steel 316.

DIFFERENTIAL PRESSURE – BAR

0.60 25- 50 m
Most commonly double open ended,
0.50
but can be fitted with several industry
standard end caps. 0.40

0.30
O-rings for end caps include Nitrile, 75- 125 m
EPDM, Silicone, Viton, 0.20 200 m
PTFE encapsulated Viton,
0.10
PTFE encapsulated Silicone.
0 10 20 30 40
FLOW RATE (L/MIN)

9
HC SERIES RESIN BONDED
CARTRIDGES F I LT E R C A R T R I D G E S

WHILST MOST MELT BLOWN Available micron ratings: RESIN BONDED FILTER Available in a wide range of micron Maximum recommended operating
CARTRIDGES ARE USED FOR 0.5 to 400. CARTRIDGES ARE LOW COST, ratings from 2 – 150. temperature 121°C.
CLARIFICATION OF FLUIDS, THE NOMINAL RATED DEPTH FILTERS.
Available lengths: Standard length: Recommended change out differential
HC SERIES IS A DEPTH FILTER Most common applications include :
5” – 20” 9 7/8” to 40”. pressure 3.5 Bar. See table below
WHICH IS USED FOR PARTICLE Filtration of fluids with for maximum cartridge
Standard diameter:
SIZE CLASSIFICATION. Inner diameter 27mm. Outer a high viscosity. pressure resistance.
diameter 67mm. I.D. 28.6mm,
The construction incorporates rigid Filtration of solvents, including O.D. 65mm.
support materials which prevent media With polypropylene solvent based paints.
support core Double open ended configuration.
deformation under high differential
pressures, providing stable performance Processes requiring a high
Double open ended with operating temperature.
and flow rates. The graded density
polyethylene gaskets
polypropylene media ensures a long Processes permitting a high
service life. Maximum differential pressure: differential pressure across the filter.
4.9 Bar @ 20°C.
The HC series is especially widely Resin bonded cartridges are
used for the filtration of paints and Maximum operating temperature: manufactured from long acrylic fibres
coatings and with fluids which have 60°C. which provide superior cartridge strength
a high viscosity. and resist breakage. Phenolic resin
impregnation also enhances the strength
of the cartridge structure and eliminates
FLUID: CMC (400cP) FLUID: CMC (10,000cP)
the need for a support core.
CARTRIDGE LENGTH: 250mm CARTRIDGE LENGTH: 250mm
1 1 3 3
0.25
0.25 0.50
0.50 5 5
Resin Bonded filter cartridges feature
0505 a unique two-stage filtration design to
DIFFERENTIAL PRESSURE - (BAR)

DIFFERENTIAL PRESSURE - (BAR)

DIFFERENTIAL PRESSURE - (BAR)

DIFFERENTIAL PRESSURE - (BAR)

0.20
0.20 0.40
0.40 1010
1 1
2525
maximise particle retention and service
0.15
0.15 3 3 0.30
0.30 life. The outer spiral wrap collects large
5050
particles and agglomerates, whilst the
0.10
0.10 5 5 0.20
0.20
7575 inner layers control the removal
1010 100~200
100~200
0.05
0.05 2525 0.10
0.10 of smaller particles.
5050
75~200
75~200 400
400
0 0 400400 0 0
0 0 2 2 4 4 6 6 8 8 0 0 2 2 4 4 6 6 8 8
FLOW
FLOW RATE
RATE (L/MIN)
(L/MIN) FLOW
FLOW RATE
RATE (L/MIN)
(L/MIN)
TEMPERATURE CARTRIDGE PRESSURE
The data does not include piping pressure drop The data does not include piping pressure drop (ºC) RESISTANCE (BAR)

PARTICLE PARTICLE REMOVAL EFFICIENCY (%) BY FILTER GRADE

SIZE ( ) 21 10
05 1 3 5 10 25 50 75 100 150 200 400
3 >75 38 8.6

5 >90 >90 >80 65 6.2

PHENOLIC RESIN IMPREGNATION ENHANCES
10 >99.9 >99.9 >98 >90 THE STRENGTH OF THE CARTRIDGE STRUCTURE
82 4.5
25 >99.9 >99.9 >98 >90 >80 AND ELIMINATES THE NEED FOR A SUPPORT CORE.
121 1.7
50 >99.9 >99.9 >99.9 >90
75 >98 >90 >80
100 >99.9 >98 >90 >80 >75
150 >99.9 >99.9 >98 >90
VERSATILE, LOW COST FILTER CARTRIDGE IDEAL FOR FILTRATION
OF HIGH VISCOSITY FLUIDS AND SOLVENT BASED FLUIDS.
11
200 >99.9 >95
PAINT PACK
C A R T R I D G E F I LT E R S Y S T E M

THE INNOVATIVE PAINT PACK CARTRIDGE FILTER SYSTEM IS AN ENCLOSED CARTRIDGE

FILTER UNIT WITHIN A SEALED OUTER BAG.WHILST IT IS MOST COMMONLY USED IN THE
PAINT INDUSTRY, IT IS SUITABLE FOR MANY APPLICATIONS WHICH DESIRE AN ENCLOSED,
READY TO USE UNIT FOR REASONS OF USER SAFETY, CLEANLINESS, HYGIENE ANDTOXICITY.
The system consists of Polypropylene The Paint Pack Cartridge filter system Filter media:
adaptor with manifold, inlet and outlet is manufactured with 1, 3 or 7 filter CP2 Two zone Polypropylene Depth
ports and a double layered protective cartridges and in lengths of 5” to 30” filter or CP Polypropylene/Polyethylene
bag with filter cartridges located inside. and can be equipped with different types nominal depth filter.
Due to the protective bag, the liquid being of cartridges in accordance with suitability
Maximum temperature:
filtered does not come into contact with to the application.
60°C.
the housing and protects the user from
Adaptor: Polypropylene.
direct contact with the fluid during Maximum Differential Pressure:
filter changeout. Protective bag: Polyethylene or Nylon. 3 Bar @ 20°C.

SINGLE 3 7
DIMENSIONS CARTRIDGE CARTRIDGES CARTRIDGES

OUTSIDE DIAMETER 91mm 173mm 236mm

LENGTH: 5” CARTRIDGES 190mm N/A N/A

LENGTH: 10” CARTRIDGES 316mm 343mm 371mm

LENGTH: 20” CARTRIDGES 566mm 593mm 621mm

LENGTH: 30” CARTRIDGES N/A 843mm 871mm DOUBLE LAYERED PROTECTIVE BAG WITH
FILTER CARTRIDGES LOCATED INSIDE.
INLET AND OUTLET CONNECTIONS R ½” R 1” R 1 ¼”

DUE TO THE PROTECTIVE BAG, THE LIQUID BEING FILTERED DOES NOT COME
INTO CONTACT WITH THE HOUSING AND PROTECTS THE USER FROM DIRECT
CONTACT WITH THE FLUID DURING FILTER CHANGEOUT.
13
PLEATED FILTER PRESSURE DROP DATA OBTAINED
USING WATER AT 20ºC PER 10” FILTER
BAR PSID

E C O N O P L E AT S E R I E S
3

CARTRIDGES
3
0.2
0.2

BAR PSID
TOP-PLEAT PP DROP DATA OBTAINED
PRESSURE
2
USING WATER AT 20ºC PER 10” FILTER
PLEATED FILTER CARTRIDGES ARE SURFACE FILTERS FOR REMOVING HARD, PRODUCT PERFORMANCE: 0.1 µm The Econopleat 2 series of pleated Surface area: >0.34m2 per 10” length.
BAR PSID
cartridges consist of 3 layers of filter

PRESSURE DROP
NON-DEFORMABLE PARTICLES FROM A LIQUID STREAM. THEY FEATURE A 3
3 4 7/8” to 40” lengths.
0.2 µm media, resulting in a high surface area

PRESSURE DROP
LARGE FILTER AREA, A HIGH DIRT HOLDING CAPACITY AND CONSEQUENTLY 0.20.1 PRESSURE DROP DATA OBTAINED 0.20.1 PPG-0.45
A LONG FILTRATION LIFETIME. USING WATER AT 20ºC PER 10” FILTER cartridge that performs well with high Single piece construction.
0.45 µm
The sharp cut-off characteristics created by the filter media ensures dependable BAR PSID1 1 µm flow rates, whilst
BAR PSID
1 achieving a good dirt
PPG-1
Standard I.D. 27.5mm O.D. 64mm.
3 3 µm
and highly efficient particle removal at the designated micron rating. Pleated cartridges 5 µm holding capacity with no compromise
3
0.2 2 10 µm
are therefore widely used as particle size classification filters, as well as being utilised µmµm
0.1 20 to operational
0.2 2 pressure drops.
PPG-3 Large outer diameter 116mm versions
30 µm PPG-5 available, 10”– 40”.

PRESSURE DROPPRESSURE DROP

as either final filters or as protection for expensive membrane filter cartridges. 50 µm
BAR PSID
0.2 100
µm µm
ECONOPLEAT PP: PPG-10

PRESSURE DROPPRESSURE DROP

T O P- P L E AT S E R I E S
0.1
0.0 100% polypropylene
0.1
PPG-0.45
melt blown filter media Available micron ratings (@ 95% efficiency):
2 0.0
5 10 15 0.45
20
0.1 µmµm 5 10
with thermally bonded end caps.
2 15 20 Econopleat PP: 0.2 - 50.
1 FLOW RATE (L/MIN) 1 µm FLOW RATE (L/MIN) PPG-1
3 µm 1 Econopleat GF: 2, 5, 10, 20.
5 µm
µm
The Top-Pleat Series is one of the The Top-Pleat GF is constructed from Surface area: 0.1
0.2
10 µm ECONOPLEAT GF : PPG-0.45 Econopleat PE: 5, 10, 20, 50.
20 µm 0.1 PPG-3
finest ranges of pleated cartridges on laboratory grade borosilicate (glass fibre) 0.65m2 per 10” length. 30 µm
0.45 µm
Borosilicate media with polypropylene PPG-5
Polypropylene core and polypropylene
market. Consisting of 4 layers of the and incorporates polypropylene pre-filter 1 50
µmµm support layers PPG-10
1 with thermally bonded
1 PPG-1
4 7/8” to 40” lengths. 3100
µm µm end caps (for all media).
highest quality filter media, they provide and final filter layers. Borosilicate is a 0.0 5 µm end caps.0.0
10 µm
exceptional filter efficiency and lifetime. hydrophilic filter media, providing superior Modular construction. 5 10 15 2020 µm 5 10 15 20
PPG-3 End fittings:
FLOW RATE (L/MIN) 30 µm FLOW RATE (L/MIN) PPG-5
The constituent filter media has flow and lower pressure drops compared to 50 µm ECONOPLEAT PE : PPG-10 Double open ended with flat gaskets,
Standard I.D. 29.5mm O.D. 71mm. 100 µm
thermobonded fibres to prevent fibre polypropylene media. The 1 micron version Polyester media with polypropylene Code 3, Code 7, Code 8.
0.0
and contaminant release. is ideally suited to applications requiring Available micron ratings: ECONOPLEAT PP: end caps.
0.0
5 10 15 20
5 10 15 20 Gasket materials: Nitrile, EPDM, Viton,
Cryptosporidium and Giardia Cyst removal Top-Pleat PP: 0.1 – 100. FLOW RATE (L/MIN) FLOW RATE (L/MIN)
The Top-Pleat PP is constructed from Silicone, PTFE encapsulated Viton, PTFE
(certified to NSF/ANSI standard 53 for cyst Top-Pleat GF: 0.45, 1, 3, 5, 10. PRESSURE DROP DATA OBTAINED USING WATER AT 20ºC PER 10” FILTER
100% polypropylene melt blown microfibre 35.00 encapsulated Silicone.
reduction). Borosilicate has a natural charge
media and has a wide range of application Polypropylene core and rigid outer cage.
(Z potential) to capture organic matter and 30.00 Maximum recommended operating

DIFFERENTIAL PRESSURE - (Kpa)

suitability. Polypropylene is especially
retain colloids. Top-Pleat GF cartridges Thermally welded end caps. temperature 80°C.
compatible with applications which require 25.00 0.22µm
have an efficiency of 99.98% 0.45µm
filter cartridge sterilisation with caustic soda. End fittings: 20.00 1µm 2.75 Bar max dP
at the designated micron rating.
They are absolute rated at the designated Double open ended with flat gaskets, 3µm
15.00 PRESSURE DROP DATA OBTAINED USING WATER AT 20ºC PER 10” FILTER 5µm
micron rating (see table below). Code 3, Code 7, Code 8. 35.00 10µm
10.00 20µm
Gasket materials: 30.00 30µm
PARTICLE REMOVAL EFFICIENCY (%) BY FILTER GRADE

PRESSURE - (Kpa)
PARTICLE 50µm
SIZE ( ) Nitrile, EPDM, Viton, Silicone, PTFE 5.00
0.1 0.2 0.45 1 3 5 10 20 30 50 100 25.00 PRESSURE DROP DATA OBTAINED USING WATER AT 20ºC PER 10” FILTER 0.22µm
encapsulated Viton, PTFE encapsulated 35.000.00 0.45µm
0.1 95 93 82 80 30 20.00 0 5 10 15 20 25 30 35 40 1µm
Silicone. FLOW RATE (L/MIN) 3µm
30.00

- (Kpa)
0.2 96 95 83 82 59 15.00 5µm
Maximum recommended operating

DIFFERENTIAL
25.00 10µm
0.45 98 97 96 94 82 0.22µm
20µm
temperature 80°C.

DIFFERENTIAL PRESSURE
10.00 0.45µm
30µm
1 >98 98 97 96 86 47 20.00 1µm
50µm
3µm
3 99 >98 98 97 97 90 30 29 28 26
Maximum recommended differential 5.00
5µm
15.00
pressure 2.75 Bar. 0.00 10µm
5 >99 >99 99 98 >97 97 57 56 55 54 10.00 0 5 10 15 20 25 30 35 40 20µm
Food grade version available. FLOW RATE (L/MIN) 30µm
10 >99 99 >98 98 98 91 90 89 29 50µm
5.00
20 99 >98 >98 98 98 97 96 48
0.00
30 >99 99 99 >98 >98 98 97 89 0 5 10 15 20 25 30 35 40
FLOW RATE (L/MIN)
50 >99 >99 99 >98 98 >97 94
100 >99 >99 99 >98 >98 98

THREE LAYERS OF FILTER MEDIA ACHIEVES A GOOD

15
MODULAR CONSTRUCTION
WITH RIGID OUTER CAGE. DIRT HOLDING CAPACITY AND PERFORMS WELL
WITH HIGH FLOW RATES.
 HIGH FLOW PLEATED
CARTRIDGES
HIGH FLOW PLEATED CARTRIDGES COMBINE THE BEST OF PLEATED AND LARGE
HIGH FLOW GRAPHS
DIAMETER CARTRIDGES. THE UNIQUE MULTI-LAYERED CONSTRUCTION PROVIDES
ABSOLUTE RATED PARTICLE RETENTION ACROSS A WIDE RANGE OF FLOW RATES
WITH EFFICIENCIES OF 99.98% AT THE DESIGNATED MICRON RATING.
WATER FLOW-RATE BASED ON A 60” CARTRIDGE
The large diameter yields much higher Polypropylene or borosilicate Maximum recommended flow rate: 300

flow rates compared to traditional (glass fibre) filter media. 40m3/hr for 20” length. 80m3/hr
1 µm
2.5” diameter filters, permitting use for 40” and 60” lengths. 250
Polypropylene support and
of fewer elements and lowering 5 µm
drainage layers. Maximum recommended temperature:

DIFFERENTIAL PRESSURE (MBar)

capital expenditure. 10 µm
80°C 200
Polypropylene core and end caps. 25 µm
Contrary to standard filter cartridges, 50 µm
Maximum differential pressure:
high flow pleated filters most commonly Available micron ratings: 150
4.8 Bar at 25°C, 2.1 Bar at 80°C.
have an inside to out liquid flow 1 to 30.
direction, enabling particles to be Recommended change-out pressure
Standard lengths: 100
collected on the cartridge’s interior. 2.4 Bar.
20”, 40”, 60”.
The cartridges have an injection moulded
Choice of seals:
top end cap with integral moulded Outside diameter 152mm, inside THE LARGE DIAMETER YIELDS MUCH HIGHER FLOW
50
EPDM, Buna-N, Viton, Silicone.
handle to assist cartridge removal. diameter 74mm. RATES COMPARED TO TRADITIONAL 2.5” DIAMETER
Food contact compliant version available. FILTERS, PERMITTING USE OF FEWER ELEMENTS 0
0 20 40 60 80 100
AND LOWERING CAPITAL EXPENDITURE. FLOW RATE (L/MIN)

ALLIED FILTER SYSTEMS LTD ALSO MANUFACTURES A RANGE Manufactured from Stainless steel 304 or 316L, we offer both
OF SINGLE AND MULTI-ROUND FILTER HOUSINGS TO SUIT a horizontally mounted version for ease of cartridge change-out,
HIGH FLOW CARTRIDGE FILTERS. WE OFFER A CHOICE OF or a vertically mounted version. The appropriate connection
2 CLOSURE TYPES : THE BOLTED LID CHHF SERIES OR THE size and type can be specified in accordance with the needs of
V-CLAMP CLOSURE CHDHF SERIES. THE VESSEL INTERIOR the application. The standard design is 10 Bar and 110°C rated,
FEATURES A HIGH OPEN AREA PERFORATED PLATE SUPPORT although higher pressure and temperature ratings are available on
BASKET, AND BAYONET LOCKING SYSTEM TO ENSURE request. They can also be CE Marked and have ATEX certification.
A POSITIVE SEAL FOR THE FILTER CARTRIDGE.

IN

N4 N5
N1

N3 OUT
N2

N4 N5

ALL FILTER CARTRIDGES AND FILTER HOUSINGS ARE

MANUFACTURED TO ISO 9001 QUALITY STANDARDS.
17
 PES MEMBRANE
MULTIFINE SERIES PES MEMBRANE
P L E AT E D C A R T R I D G E PES SYMMETRIC AND PES XL SERIES
M06 M1
THE MULTIFINE SERIES 0.40 POLYETHERSULPHONE MEMBRANE PES membrane cartridges are available Diffusion Flow:
PLEATED FILTER CARTRIDGE M3 FILTER CARTRIDGES ARE DESIGNED with or without integrity testing prior to final <30ml/min/10”@0.25MPa (water) 0.22
IS DESIGNED TO FIT INTO DIFFERENTIAL PRESSURE – BAR G06 TO PROVIDE RELIABLE STERILIZING packing depending on the needs of the micron, <28ml/min/10”@0.16MPa
0.30
INDUSTRY STANDARD FILTER FILTRATION FOR A WIDE VARIETY application, and meet the requirements of (water) 0.45 micron.
BAG HOUSINGS (SEE SEPARATE OF APPLICATIONS INCLUDING FDA regulation CFR 177-82, USP Class VI,
Steam sterilization:
M5
BROCHURE) WITHOUT THE NEED 0.20 G1 WATER FILTRATION, REMOVAL OF and EC food contact directives.
PES Symmetric: ≥ 200 cycles
Y5
FOR ANY MODIFICATION TO M10 SPOILING MICRO-ORGANISMS IN (135°C/30min @ Max dP 0.3. Bar)
M20 Available micron ratings:
THE EXISTING EQUIPMENT. THE BEVERAGES, AND FILTRATION OF PES XL: ≥ 100 cycles (121°C/30min @
PES Symmetric: 0.1, 0.22, 0.45.
HIGH SURFACE AREA PROVIDES 0.10 PHARMACEUTICAL PRODUCTS. Max dP 0.3 Bar).
M50 PES XL: 0.1, 0.22, 0.45, 0.65, 0.8, 1.2.
A HIGH FLOW RATE AND DIRT M80
Y50 Stringent quality control standards assure
HOLDING CAPACITY WITH A LOW Y80 Polypropylene support core. Hot water sterilization:
0
effective, consistent filtration performance 85°C/30 min @ Max dP 2 Bar.
PRESSURE DROP. 100 200 300 400 500
and controlled pore sizes. PES membranes Available from 10”– 40” (5” version
FLOW RATE (L/MIN) FOR SIZE 1 ELEMENT. MULTIPLY BY TWO FOR SIZE 2 ELEMENT
Available to suit size 1 and 2 vessels, are inherently hydrophilic, and can available for PES XL). Cleaning solution:
M – POLYPROPYLENE G – BOROSILICATE Y - POLYESTER
Multifine cartridges are manufactured therefore operate at high flow rates with 2% NaOH Solution @ ≤ 65°C.
Effective filtration area 0.58m2/10”.
from melt blown polypropylene, polyester a low differential pressure. Polypropylene Bacterial challenge test with
or borosilicate filter media. The cartridge support layers are present to provide Range of configurations including double
B.diminuta bacteria.
features polypropylene end caps and an mechanical strength and additional open ended, Code 7, Code 8 and Code 3.
outer cage which provides mechanical contaminant holding capacity. Available gaskets include O-rings include
support for the filter media. A choice of Silicone, EPDM and Viton. FLOW RATE CHARACTERISTICS
The PES Symmetric Series consists
gaskets is available to meet the chemical Can be provided with PBT or stainless
of a single layer symmetric PES membrane. 90
0.1µm
compatibility needs of the application. steel inserts.
The PES XL Series consists of a single

DIFFERENTIAL PRESSURE (KPA)

75
layer highly asymmetric membrane,
Maximum operating temperature:
providing a superior dirt holding capacity 60
80°C.
and therefore longer service life. 0.2µm
45
Maximum differential pressure:
A special construction double layer version
4.0 Bar at 21°C, 2.4 Bar at 70°C. 30 0.45µm
is also available on request consisting
of a layer of symmetric and a layer of Bubble point: 15

asymmetric membrane. >0.34 MPa (water) 0.22 micron, 0

0 10 20 30 40 50 60
>0.22 MPa (water) 0.45 micron.
FITS INTO INDUSTRY STANDARD BAG FLOW-RATE (L/MIN) @20ºC

FILTER VESSELS WITHOUT THE NEED

FOR EQUIPMENT MODIFICATIONS. RELIABLE MICROBIOLOGICAL
CONTROL
The primary purpose of this membrane
filter cartridge in beverage filtration is
to effectively remove product spoiling
microorganisms.

TYPICAL LOG REDUCTION VALUE (LRV)

B.diminuta Lactobaccilus Sasharomyces

Brevis Cerevisiae
0.1 m >7/cm2 N/A N/A
0.2 m >7/cm2 N/A N/A
0.45 m N/A >7/cm N/A
0.65 m N/A >4/cm2 >7/cm2
1.2 m N/A N/A
Log reduction Values are calculated using the following formula:
>7/cm2
19
LRV=log10 ( )total number of organisms entering the filter
total number of organisms exiting the filter
CARBON CARTRIDGES DUO CARBON CARBON WRAP
ECB AND SCB SERIES (DC) SERIES (CW) SERIES
THE ECB SERIES USES THE LATEST CARBON Constructed with an outer polypropylene wrap that protects The Duo Carbon (DC) series filter cartridge is effective at The Carbon Wrap (CW) series features powder activated carbon
MANUFACTURING TECHNIQUES MAKING IT THE and extends the life of the carbon block, capturing particles reducing the chlorine taste and odour from drinking water. (PAC) impregnated into a cellulose fibre media, removing
ECONOMIC CHOICE FOR A WIDE RANGE OF and preventing premature blinding. sediments and other fine particulates throughout its depth.
The Duo Carbon features a first stage wound polypropylene pre-filter
INDUSTRIAL WATER APPLICATIONS. The CW series combines the advantages of both a high dirt-loading
9¾” and 40” lengths. Standard I.D. 28 mm, O.D. 64mm. to capture sediment and other impurities, the second stage utilises
depth cartridge with the odour, discolouration and chlorine
The ECB is ideally suited to processes where the life of the carbon the highest quality carbon for water treatment, and a final 5 micron
Available in large diameter 116mm, 9¾” and 20” lengths reduction capabilities of PAC.
is never fully utilised. ECB series cartridges are manufactured filter sleeve captures suspended carbon fines before they exit the
for reduced cartridge changeout frequency. filter. The Duo Carbon series therefore has the benefit of a two in one The carbon impregnated sheet is wrapped around a polypropylene
from acid washed industrial grade bituminous granular activated
carbon (GAC) extruded into a carbon block format. ECB series: 1, 5 and 10 micron. process, eliminating the need for a pre-filtration step. support core, supported by an outer layer of polyethylene netting.
SCB series: 5,10 micron. Choice of granulated coal or granulated coconut shell carbon 9 ¾”- 40” lengths. Standard I.D. 28 mm, O.D. 64mm.
The SCB series is manufactured using fine, acid
washed, bituminous powder activated carbon (PAC), Double open ended. (both can have optional silver impregnation to inhibit bacteria
Available in large diameter 116mm 9¾” and 20” lengths
greatly increasing surface area and cartridge life. growth), or cellulose carbon paper.
Maximum operating temperature 82°C. for reduced cartridge change out frequency.
Food grade additives are used to bond the PAC, 10”- 40” lengths. Standard I.D. 28 mm, O.D. 64mm.
enabling the SCB series to be suitable for drinking 2.5 Bar maximum dP Rating: 5 micron.
water applications. Pre-filtration layers 1 - 50 micron. Final 5 micron filtration layer.
End caps: Double open ended with EPDM gaskets, Code 3,
Extruded from high quality carbon fines, the SCB has Choice of end fittings including Double open ended, Code 3, Code 7 or Code 8.
a much higher adsorption capacity, extending life and Code 7 or Code 8.
Maximum operating temperature 80°C.
improving chlorine reduction capacities compared to Maximum operating temperature 80°C.
the ECB series. The result is a highly efficient carbon 2.5 Bar maximum dP
cartridge with sediment filtration capabilities. 2.5 Bar maximum dP

CARBON CARTRIDGES C A R B O N CMULTI-STAGE

A R T RCONSTRUCTION
I D G E S ENABLES BOTH
PARTICLE RETENTION AND WATER TREATMENT
IN A SINGLE CARTRIDGE.

ECB
ECB:
ECB: SCB
SCB
SCB ECB: CARBON
CARBON WRAP
WRAP SCB

100,000
100,000 100,000
15.1
15.1lpm
lpm 15.1 lpm
@@ @
0.4bar
0.4bar 0.4bar
50,000
50,000 50,000 50,000
50,000 90,000 50,000
90,000
90,000
15.1
15.1lpm
lpm 15.1 lpm
@
45,000
45,000
@@
0.5bar
0.5bar 45,000 45,000
45,000
0.5bar
80,000
CARBON
45,000 WRAP
80,000
80,000

40,000
40,000 40,000 40,000
40,000 40,000
70,000 15.1
15.1lpm
lpm 15.1 lpm
70,000
70,000 @
@@
0.2bar
0.2bar 0.2bar
Reduction (litres)
(litres)

35,000
35,000 35,000 35,000
35,000 35,000
60,000
60,000 60,000
Reduction (litres)
(litres)

7.6
7.6lpm
lpm 7.6 lpm
Chlorine Reduction

@@ 30,000 @ 30,000
30,000
30,000 30,000
30,000 0.4bar
0.4bar
0.4bar
7.6 lpm 50,000
Chlorine Reduction

Chlorine Reduction (litres)

7.6
7.6lpm
lpm 50,000
50,000
@@ @
25,000
25,000 0.5bar
0.5bar 25,000 25,000 0.5bar
25,000 25,000
Chlorine

7.6
7.6lpm
lpm 7.6 lpm
40,000
40,000 @@ 40,000 @
Chlorine

0.2bar
0.2bar 0.2bar 7.6 lpm
20,000
20,000 20,000 20,000
20,000 7.6
7.6lpm
lpm 20,000
@@ @
0.2bar
0.2bar 0.2bar
30,000
30,000 7.6
7.6lpm
lpm 30,000 7.6 lpm
Chlorine Reduction (litres)

Chlorine Reduction (litres)

7.6 lpm @
Reduction (litres)
(litres)

15,000
15,000 7.6
7.6lpm
lpm @@ 15,000 15,000
15,000 15,000
@@ @ 0.3bar 3.8 lpm
0.3bar
0.3bar 0.4bar 3.8
3.8lpm
lpm
0.4bar
0.4bar @@ @
20,000 0.2bar
Chlorine Reduction

20,000
20,000 10,000 3.8 lpm10,000 0.2bar
0.2bar 3.8 lpm 10,000
10,000
10,000 3.8
3.8lpm
lpm 3.8
3.8lpm
lpm 10,000
@@ @ @
@@ 0.3bar
0.4bar
0.4bar 0.3bar
0.3bar 0.4bar
10,000
10,000 5,000 10,000 5,000
5,000
5,000 5,000
5,000
Chlorine

9¾” 20” 9¾”BB 20”BB

21
9¾”
9¾” 20”
20” 9¾”BB
9¾”BB 20”BB
20”BB 9¾”
9¾” 20”
20” 9¾”BB
9¾”BB 20”BB
20”BB 9¾” 20” 9¼BB”
9¾”
9¾”20BB” 20”
20” 9¾”
9¼BB”
9¼BB” 20” 20BB”
9¼BB” 20BB”
20BB”
FLOW FLOW CARTRIDGE SIZE
CARTRIDGE
CARTRIDGE SIZE
SIZE CARTRIDGE
CARTRIDGE SIZE
SIZE FLOW
FLOW
OIL ABSORBENT METALLIC
F I LT E R C A R T R I D G E S F I LT E R C A R T R I D G E S
OUR RANGE OF OIL ABSORBENT As an option, our ‘Plus’ media will build O-rings for end caps include METALLIC FILTER CARTRIDGES Our range has two construction options, Standard I.D.:
FILTER CARTRIDGES HAVE BEEN up a differential pressure and flow will Nitrile, EPDM, Silicone, Viton, PTFE ARE A RE-USABLE SURFACE FILTER either non-pleated or pleated which provides Double open ended – 26mm
DEVELOPED FOR APPLICATIONS be reduced as the cartridge absorbs encapsulated Viton, PTFE encapsulated MANUFACTURED USING STAINLESS enhanced surface area and filter lifetime. Code 7 – 36mm
REQUIRING REMOVAL OF hydrocarbons. Silicone. STEEL WIRE MESH FILTER MEDIA. Code 8 – 33mm
Stainless steel 304 or 316.
HYDROCARBONS FROM WATER They are designed to withstand demanding Gasket materials:
Alternatively our ‘Block’ media forms Stainless steel core and caps available 10” to 40” lengths.
AS A POLISHING FILTER AFTER working conditions as well as strong Nitrile, EPDM, Viton,
an instant barrier when in contact with for more demanding applications.
COALESCING OR FOLLOWING cleaning procedures such as backwash Available micron ratings: Silicone, PTFE.
hydrocarbons, and can be used for final
OTHER BULK REMOVAL METHODS. Maximum operating temperature 80°C.
or chemical treatment. They can also be 10, 25, 40, 70, 100, 150, 250,
stage oil removal where no oil in water
IT IS RECOMMENDED FOR cleaned in an ultrasonic bath, with high 300, 400, 750.
monitors are present. Food grade version available.
APPLICATIONS WITH <500PPM pressure water or by simply brushing the
TOTAL HYDROCARBONS, AND HAS Available 9 ¾” to 60” length. End fittings:
surface of the wire mesh.
A RETENTION OF 99%. Double open ended with flat gaskets,
Standard O.D. 70mm. (Optional large code 3, Code 7, Code 8.
Stainless steel has a wide chemical
Oil absorbent cartridges are constructed 116mm diameter) I.D. 27.5mm.
compatibility, and use at high temperature
from an impregnated media consisting Standard O.D. for all end cap
Standard construction is with can be achieved in relation to the material
of fibres that have a unique coating configurations: 65 mm
a Polypropylene core. joining the end cap. Their low pressure loss
thermally bonded within the structure. also makes them suitable for use with high
Available with industry standard
Using the standard media, flow is not viscosity fluids.
end caps.
effected and no hydrocarbons are
released. The filter media will absorb
MAXIMUM WORKING TEMPERATURE IN RELATION
3 times its weight before change
TO METHOD OF JOINING END CAP.
out is required.
EPOXY/SS PRESSED SS TIN JOINT/ SS END POLYPROPYLENE INTEGRALLY WELDED
END CAPS END CAPS CAPS END CAPS SS END CAPS

130ºC 300ºC 190ºC 80ºC 400ºC

RE-USABLE SURFACE FILTERS

OIL ABSORBENT FILTER MEDIA WILL ABSORB THREE TIMES
ITS WEIGHT BEFORE REQUIRING CHANGE OUT.
MANUFACTURED USING STAINLESS 23
STEEL WIRE MESH MEDIA.