Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 285 views

    Ce3481 Set1

    Uploaded by

    THIRUMALAI
    This document outlines the experiments and assessments for a Strength of Materials and Fluid Machinery Laboratory practical end semester examination. It lists 20 potential experiments students can choose from for their examination, which will be 3 hours and involve conducting the selected experiment, tabulating data, performing calculations and results, and undergoing a viva voce assessment and record evaluation for a total of 100 marks. The experiments involve testing properties such as hardness, stiffness, rigidity, yield strength, and efficiency of materials and fluid machinery including springs, specimens, pumps, and turbines.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Ce3481 Set1

    Uploaded by

    THIRUMALAI
    285 views3 pages
    This document outlines the experiments and assessments for a Strength of Materials and Fluid Machinery Laboratory practical end semester examination. It lists 20 potential experiments students can choose from for their examination, which will be 3 hours and involve conducting the selected experiment, tabulating data, performing calculations and results, and undergoing a viva voce assessment and record evaluation for a total of 100 marks. The experiments involve testing properties such as hardness, stiffness, rigidity, yield strength, and efficiency of materials and fluid machinery including springs, specimens, pumps, and turbines.

    Original Description:

    ANNA UNIVERSITY

    Original Title

    CE3481 SET1

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document outlines the experiments and assessments for a Strength of Materials and Fluid Machinery Laboratory practical end semester examination. It lists 20 potential experiments students can choose from for their examination, which will be 3 hours and involve conducting the selected experiment, tabulating data, performing calculations and results, and undergoing a viva voce assessment and record evaluation for a total of 100 marks. The experiments involve testing properties such as hardness, stiffness, rigidity, yield strength, and efficiency of materials and fluid machinery including springs, specimens, pumps, and turbines.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    285 views3 pages

    Ce3481 Set1

    Uploaded by

    THIRUMALAI
    This document outlines the experiments and assessments for a Strength of Materials and Fluid Machinery Laboratory practical end semester examination. It lists 20 potential experiments students can choose from for their examination, which will be 3 hours and involve conducting the selected experiment, tabulating data, performing calculations and results, and undergoing a viva voce assessment and record evaluation for a total of 100 marks. The experiments involve testing properties such as hardness, stiffness, rigidity, yield strength, and efficiency of materials and fluid machinery including springs, specimens, pumps, and turbines.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 3

    B.E / B.Tech.

    PRACTICAL END SEMESTER EXAMINATIONS, APRIL/MAY 2023


    Fourth Semester

    CE3481 - STRENGTH OF MATERIALS AND FLUID MACHINERY LABORATORY

    (Regulations 2021)

    Time : 3 Hours Answer any one Question Max. Marks 100

    Aim/Principle/Apparatus Tabulation/Circuit/ Calculation Viva-Voce Record Total


    required/Procedure Program/Drawing & Results
    30 30 20 10 10 100

    1. Conduct Rock well hardness test on mild steel, brass and aluminium specimens.

    2. Find the stiffness and rigidity modulus of the given open coiled helical spring.

    3. Perform the torsion test on the given specimen to find the following

    1. Modulus of rigidity

    2. Shear stress.

    4. Determine the Rockwell hardness no. of the given specimens.

    (i) Brass

    (ii) Mild steel

    (iii) Cast iron

    5. Using tension testing machine determine the yield stress, ultimate stress, breaking stress, percentage
    of reduction in area, percentage of elongation over a gauge length and young’s modulus for the
    given mild steel rod.

    6. Find the hardness of the given material using Brinell hardness testing machine.

    (i) aluminum

    (ii) Cast iron

    (iii) Mild steel

    Page 1 of 3
    7. Determine the mechanical properties of the given specimen (at least two samples to be given for
    each material) before and after hardening.

    8. Conduct a tensile test on a mild steel specimen and determine the following.

    (i) Limit of proportionality (iv) Ultimate strength

    (ii) Elastic limit (v) Young’s modulus of elasticity

    (iii) Yield strength (vi) Percentage elongation

    9. Find the modulus of rigidity by conducting torsion test on mild steel specimen.

    10. Conduct Rock well hardness test on brass and aluminium specimens.

    11. Determine the Co-efficient of discharge(Cd) of a Venturimeter in 25mm diameter of the pipe

    12. Determine the maximum efficiency and draw the performance characteristic curves by using Single
    Stage Centrifugal Pump.

    13. Determine the maximum efficiency and draw the performance characteristic curves by using
    Reciprocating Pump

    14. Carryout an experiment to determine the friction factor when the fluid flows through the pipe.

    15. Determine the efficiency of Pelton wheel and draw the performance characteristic curves

    16. Perform an experiment to determine the flow in a pipe using venturimeter and determine the Co-
    efficient of discharge.

    17. Determine the maximum efficiency of Reciprocating Pump and draw the following graphs

    i. Discharge vs Head

    ii. Discharge vs input power

    iii. Discharge vs efficiency

    18. Determine the friction factor when the fluid flows through a15mm and 40mm diameter of the pipes.

    Page 2 of 3
    19. Determine the maximum efficiency and draw the performance characteristic curves of Centrifugal
    Pump by using constant speed method.

    20. Determine the maximum efficiency and draw the performance characteristic curves by using Multi
    Stage Centrifugal Pump.

    Page 3 of 3

    You might also like